O Ring Manufacturer
4
ISMAT Industrial Spares Manufacturing and Trading Company ( ISMAT ) was founded in 1981 by Ali Hussain Yakub a mechanical engineer from Sheffield UK. ISMAT initially started off as an industrial spares manufacturer catering to the various maintenance needs of industry and meeting the needs of its own trading outlets in Chennai, Bangalore and Coimbatore. Over a period of time ISMAT has evolved from a rubber products maintenance supplier to a tier 1 OEM supplier supplying to various industry sectors like earth moving equipments, wind mill manufacturers valve, Pump and Automotive Industry etc. Not only has the clientele evolved, ISMAT has also diversified into manufacturing engineering plastic components which has complemented the rubber portfolio being offered by ISMAT and has helped in providing a wider array of goods to meet the clients total solution needs of Rubber and Plastic products. The founder Yakub has never considered ISMAT as a rubber or a plastic manufacturer but as an engineering company driven by innovation and a desire to develop new products to meet the ever- changing demands of its customers. USES OF O-RINGS Description An O-Ring is a torus, or doughnut-shaped ring, generally molded from elastomers. An O-Ring is a circular cross-section ring molded from rubber.
-
Upload
ismat-ismats -
Category
Automotive
-
view
119 -
download
0
Transcript of O Ring Manufacturer
ISMAT
Industrial Spares Manufacturing and Trading Company ( ISMAT ) was founded in 1981 by Ali Hussain Yakub a mechanical engineer from Sheffield UK. ISMAT initially started off as an industrial spares manufacturer catering to the various maintenance needs of industry and meeting the needs of its own trading outlets in Chennai, Bangalore and Coimbatore.
Over a period of time ISMAT has evolved from a rubber products maintenance supplier to a tier 1 OEM supplier supplying to various industry sectors like earth moving equipments, wind mill manufacturers valve, Pump and Automotive Industry etc.
Not only has the clientele evolved, ISMAT has also diversified into manufacturing engineering plastic components which has complemented the rubber portfolio being offered by ISMAT and has helped in providing a wider array of goods to meet the clients total solution needs of Rubber and Plastic products.
The founder Yakub has never considered ISMAT as a rubber or a plastic manufacturer but as an engineering company driven by innovation and a desire to develop new products to meet the ever-changing demands of its customers.
USES OF O-RINGS Description
An O-Ring is a torus, or doughnut-shaped ring, generally molded from elastomers. An O-Ring is a circular cross-section ring molded from rubber.
O-Rings are used to keep fluid or air in or out of a defined space. O-Ring is used to block a pathway that fluid or air may escape through. These rings are commonly used in mechanical applications, such as pipe connections, and help to ensure a tight seal between two objects. O-Rings are designed to be seated in a groove or housing that keeps the ring in place. Once in its track, the ring is compressed between the two pieces and, in turn, creates a strong seal where they meet.
Advantages of using an O-Ring
No critical torque on tightening, therefore unlikely to cause structural damage. O-Rings normally require very little room and are light in weight. The duration of life in the correct application corresponds to the normal aging
period of the O-Ring They seal over a wide range of pressure, temperature and tolerance. Where differing amounts of compression effect the seal function (as with flat
gaskets), an O-Ring is not affected because metal to metal contact is generally allowed for.
In many cases an O-Ring can be reused, an advantage over non-elastic flat seals and crush-type
In a truly static seal, the mating gland parts are not subject to relative movement, except for small thermal expansion or separation by fluid pressure. Its uses are seal under a bolt head or rivet, a seal at a pipe or tubing connection, a seal under a cover plate, plug or similar arrangement or, in general, In a rotary seal, either the inner or outer member of the sealing elements turns around the shaft axis in one direction only. Uses of rotatory seals include
sealing a motor or engine shaft, or a wheel on a A pneumatic seal may be any of the previously described types of O-Ring seals but is given a different classification because of the use of a gas or vapour rather than a liquid. This has a vital effect on the lubrication of the O-Ring and thus influences all moving (or dynamic) seal installations. A further point is that pneumatic seals may be affected by the increase in gas temperature with compression. A vacuum seal confines or contains a vacuum environment or chamber. The leakage tolerance is less than for pressure seals.
Multiple O-Rings
They are useful in a vacuum seal to reduce permeation. In a seat seal, the O-Ring serves to close a flow passage as one of the contact members. Examples of a seat-seal include O-Ring as a “washer” on the face of a spiral threaded valve, a seal on the cone of a floating check valve, and a seal on the end of a solenoid plunger.
In an oscillating seal, the inner or outer member of the seal assembly moves in an arc (around the shaft axis) relative to the other member. This motion tends to rotate one or the other member in relation to the O-Ring. An example of an oscillating seal is an O-Ring seal for a faucet valve stem.
Contact Us :
No 66 & 77 Perungudi Industrial Estate, Chennai-96 . (044)24961147, 24961304 ,
Mail : [email protected]
Website : http://ismat.in/
