NX-20 Visual Scope - 光洋電子工業株式会社 · 2019. 11. 11. · NX-G21 Model with 12.1...
Transcript of NX-20 Visual Scope - 光洋電子工業株式会社 · 2019. 11. 11. · NX-G21 Model with 12.1...
H M INX-20GC-AGC-7
EA7Visual Scope
308
HMI
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
Visit our website ▼http://www.koyoele.co.jp/english/
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2018 Latest catalog (free) is available online.
HMI Lineup
HMI Lineup
Panel Computer
Programmable Touch Panel
HMI Software
NX-20 GC-A GC-A GC-7 EA7
Model Number NX-B20 NX-B21 NX-B20-B NX-B21-B NX-G20 NX-G21 NX-G20-B NX-G21-B GC-A14 GC-A14-R GC-73LM-R GC-73LCL-R GC-76LC EA7-S6M-RS EA7-T6CL-RS EA7-S6M-S EA7-T6CL-S EA7-T8C-S EA7-T10C-SG EA7-T12C-S EA7-T15C-S
TypePanel Computer ● ● ● ● ● ● ● ● ●Programmable Touch Panel ● ● ● ● ● ● ● ● ● ● ● ● ●
CaseOpen Frame Type ● ● ● ●Bezel Type ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Display
Device Size
15.0-inch █ █15.0-inch
12.1-inch █ █12.1-inch
█12.1-inch
█12.1-inch
█12.1-inch
█12.1-inch
10.4-inch █ █10.4-inch
█10.4-inch
8.4-inch █ █8.4-inch
█8.4-inch
█8.4-inch
█8.4-inch
█8.4-inch
7.0-inch █
█
7.0-inch wide
█
7.0-inch wide
5.7-inch ██
5.7-inch
█
5.7-inch
█
5.7-inch
█
5.7-inch
█
5.7-inch
█
5.7-inch
Display Device
TFT color LCD 262,144 colors
262,144 colors
262,144 colors
262,144 colors
262,144 colors
262,144 colors
262,144 colors
262,144 colors
262,144 colors
262,144 colors
65,536 colors
65,536 colors
65,536 colors
65,536 colors
65,536 colors
65,536 colors
65,536 colors
65,536 colors
STN Black-and-white
15 gray gradations
15 gray gradations
15 gray gradations
Resolution
1024×768 1024×768 1024×768 1024×768 1024×768 1024×768
800×600 800×600 800×600 800×600 800×600 800×600
800×480 800×480 800×480
600×480 640×480 640×480 640×480
320×240 320×240 320×240 320×240 320×240 320×240 320×240
BacklightLED ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●CCFL ● ● ●
OperationTouch Panel ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●Multi-Touch ー ● ー ● ー ● ー ● ー ー ー ー ー ー ー ー ー ー ー ー ー
Interfaces
Serial Port RS-232C RS-232C RS-232C RS-232C RS-232C RS-232C RS-232C RS-232CRS-232C
RS-422/485RS-232C
RS-422/485RS-232C
RS-422/485RS-232C
RS-422/485RS-232C
RS-422/485RS-232C
RS-422/485RS-232C
RS-422/485RS-232C
RS-422/485RS-232C
RS-422/485RS-232C
RS-422/485RS-232C
RS-422/485RS-232C
RS-422/485RS-232C
RS-422/485
USB Port
Type A USB2.0 USB2.0 USB2.0 USB2.0 USB2.0 USB2.0 USB2.0 USB2.0 USB1.1 USB1.1 USB1.1 USB1.1 USB1.1 USB1.1 USB1.1 USB1.1 USB1.1 USB1.1 USB1.1 USB1.1 USB1.1
Type B ー ー ー ー ー ー ー ー USB2.0 USB2.0 USB1.1 USB1.1 USB1.1 USB1.1 USB1.1 USB1.1 USB1.1 USB1.1 USB1.1 USB1.1 USB1.1
Ethernet ● ● ● ● ● ● ● ● ● ー ー ー ー ー ー ● ● ● ● ● ●SD Card Slot ー ー ー ー ー ー ー ー ● ー ー ー ー ー ー ー ー ー ー ー ーCF Card Slot ● ● ● ● ● ● ● ● ー ー ー ー ● ー ー ● ● ● ● ● ●Sound Output ー ー ー ー ー ー ー ー ▲*1 ー ー ー ー ー ー ● ● ● ● ● ●VGA Output ● ● ● ● ● ● ● ● ー ー ー ー ー ー ー ー ー ー ー ー ーExpansion Option ▲*1 ▲*1 ▲*1 ▲*1 ▲*1 ▲*1 ▲*1 ▲*1 ー ー ー ー ー ー ー ● ● ● ● ● ●
*1 To be supported
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
309
HMI
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2018The specifications and prices described in this catalog were valid when the catalog was issued.For the latest information, contact our sales persons or see our website.
HMI Lineup
HMI Lineup
Panel Computer
Programmable Touch Panel
HMI Software
NX-20 GC-A GC-A GC-7 EA7
Model Number NX-B20 NX-B21 NX-B20-B NX-B21-B NX-G20 NX-G21 NX-G20-B NX-G21-B GC-A14 GC-A14-R GC-73LM-R GC-73LCL-R GC-76LC EA7-S6M-RS EA7-T6CL-RS EA7-S6M-S EA7-T6CL-S EA7-T8C-S EA7-T10C-SG EA7-T12C-S EA7-T15C-S
TypePanel Computer ● ● ● ● ● ● ● ● ●Programmable Touch Panel ● ● ● ● ● ● ● ● ● ● ● ● ●
CaseOpen Frame Type ● ● ● ●Bezel Type ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Display
Device Size
15.0-inch █ █15.0-inch
12.1-inch █ █12.1-inch
█12.1-inch
█12.1-inch
█12.1-inch
█12.1-inch
10.4-inch █ █10.4-inch
█10.4-inch
8.4-inch █ █8.4-inch
█8.4-inch
█8.4-inch
█8.4-inch
█8.4-inch
7.0-inch █
█
7.0-inch wide
█
7.0-inch wide
5.7-inch ██
5.7-inch
█
5.7-inch
█
5.7-inch
█
5.7-inch
█
5.7-inch
█
5.7-inch
Display Device
TFT color LCD 262,144 colors
262,144 colors
262,144 colors
262,144 colors
262,144 colors
262,144 colors
262,144 colors
262,144 colors
262,144 colors
262,144 colors
65,536 colors
65,536 colors
65,536 colors
65,536 colors
65,536 colors
65,536 colors
65,536 colors
65,536 colors
STN Black-and-white
15 gray gradations
15 gray gradations
15 gray gradations
Resolution
1024×768 1024×768 1024×768 1024×768 1024×768 1024×768
800×600 800×600 800×600 800×600 800×600 800×600
800×480 800×480 800×480
600×480 640×480 640×480 640×480
320×240 320×240 320×240 320×240 320×240 320×240 320×240
BacklightLED ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●CCFL ● ● ●
OperationTouch Panel ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●Multi-Touch ー ● ー ● ー ● ー ● ー ー ー ー ー ー ー ー ー ー ー ー ー
Interfaces
Serial Port RS-232C RS-232C RS-232C RS-232C RS-232C RS-232C RS-232C RS-232CRS-232C
RS-422/485RS-232C
RS-422/485RS-232C
RS-422/485RS-232C
RS-422/485RS-232C
RS-422/485RS-232C
RS-422/485RS-232C
RS-422/485RS-232C
RS-422/485RS-232C
RS-422/485RS-232C
RS-422/485RS-232C
RS-422/485RS-232C
RS-422/485RS-232C
RS-422/485
USB Port
Type A USB2.0 USB2.0 USB2.0 USB2.0 USB2.0 USB2.0 USB2.0 USB2.0 USB1.1 USB1.1 USB1.1 USB1.1 USB1.1 USB1.1 USB1.1 USB1.1 USB1.1 USB1.1 USB1.1 USB1.1 USB1.1
Type B ー ー ー ー ー ー ー ー USB2.0 USB2.0 USB1.1 USB1.1 USB1.1 USB1.1 USB1.1 USB1.1 USB1.1 USB1.1 USB1.1 USB1.1 USB1.1
Ethernet ● ● ● ● ● ● ● ● ● ー ー ー ー ー ー ● ● ● ● ● ●SD Card Slot ー ー ー ー ー ー ー ー ● ー ー ー ー ー ー ー ー ー ー ー ーCF Card Slot ● ● ● ● ● ● ● ● ー ー ー ー ● ー ー ● ● ● ● ● ●Sound Output ー ー ー ー ー ー ー ー ▲*1 ー ー ー ー ー ー ● ● ● ● ● ●VGA Output ● ● ● ● ● ● ● ● ー ー ー ー ー ー ー ー ー ー ー ー ーExpansion Option ▲*1 ▲*1 ▲*1 ▲*1 ▲*1 ▲*1 ▲*1 ▲*1 ー ー ー ー ー ー ー ● ● ● ● ● ●
*1 To be supported
310
HMI
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
Visit our website ▼http://www.koyoele.co.jp/english/
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2018 Latest catalog (free) is available online.
NX-20
HMI Lineup
Panel Computer
Programmable Touch Panel
HMI Software
NX-20Features
Panel Computer- Windows®EmbeddedStandard7 installed models - Windows®EmbeddedStandard2009 installed models- 8.4 type 12.1 SVGA - Domestic design/Manufacturing - Long-term supply guarantee (Five years) - Multi-touch operation - Case types can be selected - Abundant interface
■FeaturesReliable domestic design and manufacturingDesign and manufacture in Domestic with a sense of security, emphasizing high quality, high performance, and high reliability. Intel®AtomTM processors are used for CPUs, and energy-saving designs contribute to reducing the power consumed by machinery and equipment.
Ecological designImproved operation performance with sophisticated circuit design. By eliminating drive components such as hard disc drives and coolant fans that cause power consumption, noise generation, and mechanical failure, stable operation can be maintained for a long period of time due to low fever.
Long-term supply guaranteeLCDs have a backlight life of 70,000 times (approximately 8 years) under an environment of 25˚C. In general, PC-related supply warranty periods are short period of time, but we provide a �ve-annual long-term supply warranty period.
Two types of mounting methods can be selected.There are two types of mounting methods for machinery: open frame type, which is installed from the back, and bezel type, which is installed from the front.〔Open Frame Type〕
The open frame type, which employs a rigid frame, accommodates a wide range of machinery and equipment without a unit case.
〔Bezel Type〕The bezel type, which employs a high-quality black bezel, is easy to install because it is embedded in the front surface.
Comfortable operations using familiar Windows® OSThe on-board OS is the Windows® OS, which is widely used in personal computers and mobile devices. It contributes to the shortening of the operation learning period of machinery and equipment by creating a standard platform that is easy to understand and intuitive to understand and familiar with the usual sense of operation.
Multi-touch operation of the smartphone sensorySupports the first multi-touch operation on a web panel computer. You can operation and intuitively enlarge, reduce, and scroll the screen with a smartphone or tablet. In addition, the information displayed in a compact manner can be viewed and operation in a wide, large, easy-to-see, and easy-to-understand manner.In addition, it is possible to construct the most ef�cient operation screen that is optimized for the operation contents of each machine, such as applying the two-point simultaneous press operation to the interlock operation. Contributes to shortening the training and pro�ciency period for operators, and also contributes to the realization of a comfortable business environment.
Variety of interfacesA wide variety of interfaces have been installed to support a wide range of existing facilities and equipment. With compact D-sub 9 pins on the RS-232C two ports. Ethernet can quickly send and receive large amounts of data (10/100/1000BASE-T) RJ-45 is two ports.Five USB Rev2.0 A ports are available for easy connection to various equipments such as portable devices. The two IDE CF slots allow you to easily extended the workspace and display screens through analogue RGB outputs.
■Model Number ListItems Model Number Contents
Main Body
NX-B20 8.4 open frame Windows®EmbeddedStandard2009 models
NX-B21 8.4 open frame Windows®EmbeddedStandard7 models
NX-B20-B 8.4 bezel-type Windows®EmbeddedStandard2009 models
NX-B21-B 8.4 bezel-type Windows®EmbeddedStandard7 models
NX-G20 Model with 12.1 open frame type Windows®EmbeddedStandard2009
NX-G21 Model with 12.1 open frame type Windows®EmbeddedStandard7
NX-G20-B Models with 12.1 bezel-type Windows®EmbeddedStandard2009
NX-G21-B Models with 12.1 bezel-type Windows®EmbeddedStandard7
Option
NX-PCI-23 PCI expansion box (3 slots)
NX-PCI-21 PCI expansion box (1 slot)
NX-SHL2 Open frame type surface sheet (One sheet)
Maintenance Product
NX-BAT-1 Battery
Items Additional Model Number Content
BTO Option
M2 Memory 2 GB
C8 CF-card 8 GB (For operating system)
VS E-software product VisualScope
SC Web software product SCA runtime
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
311
HMI
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2018The specifications and prices described in this catalog were valid when the catalog was issued.For the latest information, contact our sales persons or see our website.
NX-20
HMI Lineup
Panel Computer
Programmable Touch Panel
HMI Software
NX-20Specifications
■Interface1 CF card slot With the CF1 : OS installed 4GB CF card standard CF2 : free slot for data - Usually, the slot has a lid.
2 Displays - LCD with touch panel
3 USB port (USB1, 2, 3, 4, 5)- Connection USB device. Corresponds
to USB2. 0.- USB A types of connectors- 5 ch preparation
4 Analog RGB output por t (CRT)- Connection the external analog monitor.- Outputs the same screen as the LCD
screen.- Connectors are high-density D-sub 15
pin scalpels.
5 Serial port (COM1, 2)- RS-Connect ions 232C compl iant
equipment.- The connectors are D-sub 9 Pin Mass.- Prepare 2 channels.
6 LAN port (LAN1, 2)- Connection the Ethernet equipment.- 10BASE-T/100BASE-TX /Automatic
selector of 1000BASE-T.- Connector is RJ-45 jack.- Prepare 2 channels.
7 Power connector (24 V DC GND F.G)
- Connection the 24 V DC power supply.
■System ConstructionA wide variety of interfaces are available.
USB5USB4USB3
COM2CRT
LAN2LAN1
POWERUSB2USB1 (DC24 V GND F.G)COM1
RESE
T
POWER
推定有効期限LATELY
注意高温注意
電池交換時期REPLACE THE BATTERY
See Quick Start Guide fortype of battery to be used.
CAUTIONATTENTION
Be Careful ofHigh-TemperatureSoyez prudent dehaute température
CF2:
DATA
CF1:
SYST
EM
10
6 37
1 2
3 4 5 5
Front Face
Bottom Foor
Back Side
Left Side
8 9
11
12
USB port × 5 CF card slot
Analog RGBD-sub 15 pins
LAN port × 2
Serial port × 2
Mice
Keyboard
CF card
PLC
Router
Computer
PLC
VisualScope (Optional)Other: PLC drivers, etc.
VisualScope (Optional)Other: PLC drivers, etc.
Intranet
Bar-code readerOther: Card reader, etc.
Monitoring Projector* Some connected models and manufacturers may not recognize them.
Printer
USB memory
Hard disk
CD/DVD drive
Camera
Card reader
8 Connector for expansion bus
- Reserve of expansion slots in the future
9 Battery replacement lid - Cover when replacing the battery
10 Power LEDs (POWER)- LED indicating the power state of this
equipment.- Power ON: Orange Power OFF: Turn OFF.
11 Reset switch (RESET)- Restart the equipment.
12 Operating system license label
- Windows®EmbeddedStandard 2009/7 to be labeled
312
HMI
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
Visit our website ▼http://www.koyoele.co.jp/english/
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2018 Latest catalog (free) is available online.
NX-20
HMI Lineup
Panel Computer
Programmable Touch Panel
HMI Software
■Main Body SpecificationsItems Contents
Model Number NX-B20 NX-B21 NX-B20-B NX-B21-B NX-G20 NX-G21 NX-G20-B NX-G21-B
OS
Windows® Embedded Standard 2009
○ ー ○ ー ○ ー ○ ー
Windows® Embedded Standard 7
ー ○ ー ○ ー ○ ー ○
CaseOpen Frame Type ○ ○ ー ー ○ ○ ー ーBezel Type ー ー ○ ○ ー ー ○ ○
Performance
CPU Intel® Atom™ 1.8 GHz
L2 cache 512 KB
Memory 1 GB DDR3 SDRAM
Display
Device Size 8.4-inch 12.1-inch
Display Device TFT color LCD
Display Color 262,144 color
Resolution 800 x 480 (WVGA) 1,024 x 768 (XGA)
Brightness Control 16 stages
Backlight LED
Automatic Turn-off Function Possible
Touch Panel Analog resistive type, resolution: 1,024 W x 1,024 H
Multi-touch ー ○ ー ○ ー ○ ー ○
Interfaces
Serial Port D-SUB-9P (male) x 2-port RS-232C
Ethernet RJ45 x 2-port 10 BASE-T/100 BASE-TX/1,000 BASE-T
USB (A) Port USB2. 0 x 5 ports
CF Card Slot
IDE connection Type II x 2 slots
Slot 1(For operating systems): 2 GB slots 2: free
Slot 1(For operating systems): 4 GB slots 2: free
Slot 1(For operating systems): 2 GB slots 2: free
Slot 1(For operating systems): 4 GB slots 2: free
Slot 1(For operating systems): 2 GB slots 2: free
Slot 1(For operating systems): 4 GB slots 2: free
Slot 1(For operating systems): 2 GB slots 2: free
Slot 1(For operating systems): 4 GB slots 2: free
VGA Output Analogue RGB High Density D-sub 15P x 1-port
Connector for expansion bus PCI/PCI Exprese x 1ch (Scheduled to reserve expansion slots in the future)
General Specifications
Supply Voltage 24 V DC
Allowable Power Range 19.2 to 28.8 V DC
Power Consumption 50 W or less Expansion buses: 60 W or less
Use Ambient Temperature 0 to 55˚C
Storage Ambient Temperature -10 to 70˚C
Use Ambient Humidity 25 to 85% RH (No condensation)
Storage Ambient Humidity 10 to 85% RH (No condensation)
Pollution Degree 2 (EN60950)
Noise Resistance 1,500 Vp-p
Vibration Resistance 10 to 57 Hz double-amplitude 0.3 mm (p-p) 5 minutes XYZ 10 times 57 to 150 Hz accelerations 19.6 m/s2 3 minutes XYZ 10 times
Impact Resistance 294 m /s2 (5 times in each direction of the 30 G 11 ms XYZ)
Electrostatic Discharge Resistance
Contact discharge: Level 3 (± 6 kV) Air discharge: Level 3 (± 8 kV)
Surrounding Atmosphere in Place of Use
No corrosive gases
Grounding D-class grounding
Protective Structure ー IP65F ー IP65F
Dimensions (mm) 230 W x 204 H x 67.2 D 230 W x 177 H x 68.6 D 306 W x 261 H x 56.6 D 315 W x 241 H x 70 D
Weight (g) 1,900 1,700 2,600 2,700
Panel Cutout Dimensions (mm) 188.7 W x 148.7 H 218.5 W x 165.5 H 266 W x 203 H 301.5 W x 227.5 H
Cooling System Natural air-cooling
Compliant Standards UL508, CE EN61131-2
RoHS Directive Response
AccessoriesPower plugQuick Start Guide
Power plugQuick Start GuideMounting brackets (4 units)
Power plugQuick Start Guide
Power plugQuick Start GuideMounting brackets (8 units)
NX-20Specifications
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
313
HMI
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2018The specifications and prices described in this catalog were valid when the catalog was issued.For the latest information, contact our sales persons or see our website.
NX-20
HMI Lineup
Panel Computer
Programmable Touch Panel
HMI Software
■BTO Options (Shipped Embedded Options Service)Type Additional Model Number
Memory 2 GB M2
CF-card 8 GB (For Operating System)
C8
VisualScope*1 VS
SCA Runtime*1 SC
*1 XXXXX
■Non-consolidated OptionName NX-B20 NX-B21 NX-B20-B NX-B21-B NX-G20 NX-G21 NX-G20-B NX-G21-B
PCI Expansion Box (3 slots) NX-PCI-23 ● ● ● ● ● ● ● ●PCI Expansion Box (1 slot) NX-PCI-21 ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲Surface Sheeting NX-SHL2 ● ● ー ー ● ● ー ー
● Response ▲ Under planning
■Maintenance Product/AccessoriesName NX-B20 NX-B21 NX-B20-B NX-B21-B NX-G20 NX-G21 NX-G20-B NX-G21-B
Battery NX-BAT-1 ● ● ● ● ● ● ● ●
■Dimensions (Unit: mm)
NX-B20/NX-B21 NX-B20-B/NX-B21-B
NX-G20/NX-G21 NX-G20-B/NX-G21-B
Hole
Hole
Hole
NX-B20-B / NX-B21-B
NX-G20 / NX-G21
NX-G20-B / NX-G21-B
NX-B20 / NX-B21
230 106
103 103
230
306
31570
218
218
292
65.4
204
177
261
241
165 180
165
227
225
148.7
82.8
(71.2)
1.8
26
7.5 (9.8)
551.6
68.67
+1−0
(15.85)
15.45
246203+1
−0
(21.2)
21.8
2-R2 Hole
188.7+1−0
146 14610.5 (15.5)226 +1
−0
5.8 5.8218.5+1−0
5.8
5.8
165.5+1−0
10
10
9
227.5+1−0
6.2
4
6.8 6.86.8
301.5+1−0
9 9
101.322
2×R2
View from the LCD Display Surface Side.
6-M4 stud (Back side)
6-M4 stud (Back side)
View from the LCD Display Surface Side.
299
- Apply Panel Thickness: 1.0 to 5.0 mm- Fittings tightening torques: 0.5 N・m
4×R3 +1−0
9 6.8
Hole
Hole
Hole
NX-B20-B / NX-B21-B
NX-G20 / NX-G21
NX-G20-B / NX-G21-B
NX-B20 / NX-B21
230 106
103 103
230
306
31570
218
218
292
65.4
204
177
261
241
165 180
165
227
225
148.7
82.8
(71.2)
1.8
26
7.5 (9.8)
551.6
68.67
+1−0
(15.85)
15.45
246203+1
−0
(21.2)
21.8
2-R2 Hole
188.7+1−0
146 14610.5 (15.5)226 +1
−0
5.8 5.8218.5+1−0
5.8
5.8
165.5+1−0
10
10
9
227.5+1−0
6.2
4
6.8 6.86.8
301.5+1−0
9 9
101.322
2×R2
View from the LCD Display Surface Side.
6-M4 stud (Back side)
6-M4 stud (Back side)
View from the LCD Display Surface Side.
299
- Apply Panel Thickness: 1.0 to 5.0 mm- Fittings tightening torques: 0.5 N・m
4×R3 +1−0
9 6.8
Hole
Hole
Hole
NX-B20-B / NX-B21-B
NX-G20 / NX-G21
NX-G20-B / NX-G21-B
NX-B20 / NX-B21
230 106
103 103
230
306
31570
218
218
292
65.4
204
177
261
241
165 180
165
227
225
148.7
82.8
(71.2)
1.8
26
7.5 (9.8)
551.6
68.67
+1−0
(15.85)
15.45
246203+1
−0
(21.2)
21.8
2-R2 Hole
188.7+1−0
146 14610.5 (15.5)226 +1
−0
5.8 5.8218.5+1−0
5.8
5.8
165.5+1−0
10
10
9
227.5+1−0
6.2
4
6.8 6.86.8
301.5+1−0
9 9
101.322
2×R2
View from the LCD Display Surface Side.
6-M4 stud (Back side)
6-M4 stud (Back side)
View from the LCD Display Surface Side.
299
- Apply Panel Thickness: 1.0 to 5.0 mm- Fittings tightening torques: 0.5 N・m
4×R3 +1−0
9 6.8
Hole
Hole
Hole
NX-B20-B / NX-B21-B
NX-G20 / NX-G21
NX-G20-B / NX-G21-B
NX-B20 / NX-B21
230 106
103 103
230
306
31570
218
218
292
65.4
204
177
261
241
165 180
165
227
225
148.7
82.8
(71.2)
1.8
26
7.5 (9.8)
551.6
68.67
+1−0
(15.85)
15.45
246203+1
−0
(21.2)
21.8
2-R2 Hole
188.7+1−0
146 14610.5 (15.5)226 +1
−0
5.8 5.8218.5+1−0
5.8
5.8
165.5+1−0
10
10
9
227.5+1−0
6.2
4
6.8 6.86.8
301.5+1−0
9 9
101.322
2×R2
View from the LCD Display Surface Side.
6-M4 stud (Back side)
6-M4 stud (Back side)
View from the LCD Display Surface Side.
299
- Apply Panel Thickness: 1.0 to 5.0 mm- Fittings tightening torques: 0.5 N・m
4×R3 +1−0
9 6.8
ーMain Body Model Number
Order Model NumberAdd the options required for the unit model number in the following order.
ExampleNX-G20-M2
Memory 2 GB
+ Memory 2 GB CF-card 8 GB VisualScope SCA runtime
NX-G20-C8SC
SCA runtimeCF-card 8 GB
NX-20Specifications/Dimensions
314
HMI
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
Visit our website ▼http://www.koyoele.co.jp/english/
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2018 Latest catalog (free) is available online.
GC-A
GC-7
EA7
HMI Lineup
Panel Computer
Programmable Touch Panel
HMI Software
GC-AFeatures
Programmable Touch Panel- TFT models from 7-inch WVGA - Screen transfer: Ethernet / USB- PLC connection: Ethernet / Serial- Supports SD card- Macro features- Supports remote operation
■FeaturesRemote operation on a smartphone/tabletIt transfers GC-A screens on a mobile devices to enable the operation of applications remotely. This remarkably improves safety and efficiency at workshop because the remote access enables updates and/or troubleshoots of lines at everywhere.
Email server featureServes emails indicating troubles at workshop to the of�ce or any places. So maintenance capability will be drastically enhanced because you can grasp the trouble situation immediately.
Nimble data management with SD card (to be supported)Easily moves screen data and enables analyzing the data records on the panel with a PC at the of�ce in order to prepare business reports, so that you utilize the accumulated operation records much more easily.
Advanced programmingReceived data can be processed with various programmable conditions and data transaction features. Since touch panel processes data to display and to analyze, it reduces PLC's processing load and saves communication overhead as well.
Displays with WVGA LCDDisplays clear vivid images with high resolution WVGA LCD device. Implemented 7 inch wide screen that is installed in a same size of 5.7 inch model housing is suitable for compact and integrated management machines.
Low power consumption for cost savingLED backlight saves rated power consumption to around 6 watts. Also 7 level brightness control feature helps extra power saving.
Saves maintenance costsRemoving a cooling fan and adopted excellent quality parts eliminate required replacement parts and reduce the running costs. So the ecological capability brings outstanding cost merits throughout long-term running.
Various interfaces for external devicesFor PLCs, provides Dsub 15pin RS-232C/422/485 port, Dsub 9pin RS-232C port and RJ45Ethernet port for 10Base-T/100Base-TX communication. And for project (screen) transfer, it has a built-in USB2.0 Type B port. Further, offers a reasonable model without Ethernet communication port in the product lineup.
■Software Outline① Menu Bar Prepared useful features such as Windows interfaces.
② Window Windows that are used to operate standard features can be
located anywhere to customize it.
③ Toolbar Toolbars at the end of window can be moved to be used as
toolbox.
④ Configuration Window Place various parts to prepare screen for speci�c purpose.
①
② ②
②
④③
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
315
HMI
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2018The specifications and prices described in this catalog were valid when the catalog was issued.For the latest information, contact our sales persons or see our website.
GC-A
GC-7
EA7
HMI Lineup
Panel Computer
Programmable Touch Panel
HMI Software
GC-ASpecifications
■Each Part Names and Descriptions
1 Power supply (24 V DC) Drives with useful power supply 2 SD card slot Used for uploading/downloading screen data and saving measured data. 3 Serial port 2 Makes connection with the PLC possible. 4 Serial port 1 Makes connection with the PLC possible. 5 USB B port Screen data can be uploaded/downloaded. 6 USB A port Measured data can be saved in a USB memory that is convenient to carry around. 7 Ethernet port Makes connection with the PLC possible.
5 USB A port 5 USB B port
7 Ethernet port
Status LED 4 Serial port 1
2 SD card slot
1 Power supply (24 V DC)
3 Serial port 2
Back side Back side bottom
■OptionName Model Number
Plug for AC Power Supply EA-AC-CON
AC Power Supply Module EA-AC
D-sub Terminal Block Conversion Adaptor(For RS-422/485)
EA-COMCON-3
D-sub Angle Conversion Adaptor EA-ADPTR-4
Compact Flash 512MB EA-CF-CARD
■Maintenance ProductName Model Number
Plug for Main Body Power Supply EA-DC-CON
Mounting Bracket EA-BRK-3
Battery D2-BAT-1(CR2354)
■Connection CableModel Number Connected Device
EA-2CBL SJ, DL05/06/205, SZ, PZCPU Modular 6-pin
EA-2CBL-1 DL06/205-1/260,SZ-4M,PZ3High-density D-sub 15-pin
EA-4CBL-1 D4-CPU programmer port D-sub 15-pin
EA-4CBL-2 D4-CPU general-purpose port D-sub 25-pin
EA-MITSU-CBL-1 Mini DIN for Mitsubishi FX PLC
EA-MITSU-CBL-2 Mitsubishi computer link D-sub 9-pin
EA-OMRON-CBL-1 D-sub 9-pin for Omron
316
HMI
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
Visit our website ▼http://www.koyoele.co.jp/english/
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2018 Latest catalog (free) is available online.
GC-A
GC-7
EA7
HMI Lineup
Panel Computer
Programmable Touch Panel
HMI Software
GC-ASpecifications
■Main Body SpecificationsModel Number GC-A14 GC-A14-R
Display
Device Size 7-inch
Display Device TFT color LCD
Display Color/Gradation 262,144 color
Resolution 800 x 480 (WVGA)
Brightness Control Set from the configuration screen of the main body display. (Setting components can be arranged from the drawing software.)
Backlight*1 LED
Replacement of Backlight ーAutomatic Turn-off Function Possible
Touch Panel Analog resistive type, resolution: 1,024 W x 1,024 H
Interfaces
Serial Port (RS-232C, RS-422/485*2) For PLC Connection
D-sub 15-pin (Female) x 1Transmission speed (bps): 1,200/2,400/4,800/9,600/19,200/38,400/57,600 bps
Serial Port (RS-232C) For PLC Connection
D-sub 9-pin (Male) x 1*7
Transmission speed (bps): 1,200/2,400/4,800/9,600/19,200/38,400/57,600 bps
Ethernet*3 Ethernet 10BASE-T/100BASE-TX (RJ-45, Category 5) x 1 ーUSB (A) Port*4*5 USB 1.1 x 1
USB (B) Port For screen data transfer
USB 2.0 x 1
CF Card Slot (3.3 V) ーSD Card Slot (3.3 V) 1 slot supports SDHC ーLine Output To be supported ー
General Specifications
Supply Voltage 24 V DC (100/200 V AC power supply module is available as an option: EA-AC*6)
Allowable Power Range 20.4 to 28.8 V DC, allowable ripple, within 100 mVp-p, allowable nstantaneous power failure time, within 5 ms
Power Consumption (24 V DC, at main body standalone operation)
Approx. 6 W
Use Ambient Temperature 0 to 50˚C
Storage Ambient Temperature
-20 to 60˚C
Use / Storage Ambient Humidity
10 to 85% RH (No condensation)
Noise Resistance 1000 V AC p-p, pulse width 1 .s, rise time 1 ns, between DC power supply input terminal and FG terminal (Cased on noise simulator)
Withstand Voltage 1000 V AC, 1 min, between DC power supply input terminal and FG terminal
Insulation Resistance 10 MΩ or higher (500 V DC), between DC power supply input terminal and FG terminal
Vibration Resistance Comply with IEC61131-2, 5 to 9 Hz: 3.5 mm, 9 to 150 Hz: 9.8 m/s2 (10 times each for the X, Y, and Z direction)
Impact Resistance Maximum 147 m/s2, 11 ms (2 times each for the X, Y, and Z direction)
Electrostatic Discharge Resistance
Compliant with IEC61000-4-2, contact: 4 kV, air: 8 kV
Surrounding Atmosphere in Place of Use
No corrosive gases
Grounding D-class grounding
Protective Structure Equivalent to IP65(Only front, when gasket is used.)
Dimensions (mm) 204.4 W x 156 H x 48.5 D
Weight (g) 604
Panel Cutout Dimensions (mm) 189.5 W x 144.5 H
Cooling System Natural air-cooling
Compliant Standards UL508, CE EN61131-2
Drawing Software
Software GC-A ScreenCreatorAdvance
Required system configuration
・Intel® Atom™ Processor are recommended.・Windows®XP / Windows®7 / 8 (32/64-bit)・Equipped with 512 MB (1 GB or more is recommended.)・HD disc for free space of 50 MB or more・Resolution for XGA 1,024 x 768 or higher is recommended・CD-ROM drive / USB port
AccessoriesPower plugQuick Start GuideMounting brackets
*1 25 degrees C, 24 hour continuous lighting *5 Some of commercial products may not work with this*2 Any one of RS-232C/422/485 can be used. *6 Option EA-AC speci�cation*3 Combined use by PLC connection and screen data transfer and the network *7 Disabled while using Ethernet*4 Neighbor port may not be available according to width of plug shape
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
317
HMI
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2018The specifications and prices described in this catalog were valid when the catalog was issued.For the latest information, contact our sales persons or see our website.
GC-A
GC-7
EA7
HMI Lineup
Panel Computer
Programmable Touch Panel
HMI Software
GC-ASpecifications/Dimensions
■List of Connected DevicesDevice Manufacturer PLC Series CPU Direct Connection Serial Module/Port Ethernet Module/Port
PLC
KoyoKOSTAC S Series ○ ○ ○Direct Logic Series ○ ○ ○
Mitsubishi
MELSEC-AnN Series ー ○ ーMELSEC-AnS Series ー ○ ーMELSEC-QnA Series ー ○ ーMELSEC-Q Series ー ○ ーMELSEC-FX Series ー ○ ー
Omron
SYSMAC C Series ー ○ ーSYSMAC CQM1 Series ー ○ ーSYSMAC CPM1 Series ー ○ ー
JTEKT TOYOPUC Series ー ○ ○(PC3 PC10G)
Panasonic MEWNET Series ー ○ ーToshiba Machine TCmini Series ー ○ ー
HostComputer MemoryLink ー ○ ー
■Dimensions (Unit: mm)
GC-A14/GC-A14-R
EA-AC
204.4
188
156 143
5 38.1
5.4
7.45 7.45189.5+1−0
29.8
144.5+1−096.25
5.75
5.75
Hole
CF SLOT Hole
GC-76LC
CF SLOT
GC-73LM-R
Hole
CF SLOT
93.0
76.2
36.1±0.5
14.7
197
339.5
188
315.7
152
280
143
47.1
7
42.7
130
10
188.5±0.3 4.34.3
8.8
8.8
143.5±0.3
4.3
4.3
256.2
319.5+1−0
109
109
159.75
10
10
9
9
260 +1−0
318
HMI
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
Visit our website ▼http://www.koyoele.co.jp/english/
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2018 Latest catalog (free) is available online.
GC-A
GC-7
EA7
HMI Lineup
Panel Computer
Programmable Touch Panel
HMI Software
GC-7Features
Programmable Touch Panel (GC Type)Inherited the GC-5□ display.- 10.4-inch TFT color Model number: GC-76LC- 5.7-inch STN color Model number: GC-73LCL-R- 5.7-inch STN monochrome Model number: GC-73LM-R
■Features- Shifted from the GC50 series. The applications of the GC-50 series (GC-53LC3, GC-53LM3, and sGC-
56LC2) are partially inherited. The applications can be replaced within restrictions.
■Restrictions from the GC50 Series1. Drawing software Prepare ScreenCreator5 Ver3.0 or later. You can download the drawing software from Koyo Electronics' website
free of charge.
2. Panel cutout dimensions The panel cutout dimensions are not changed. The display can be installed in the existing holes for attaching the control
panel as is.
3. Dimensions The 5.7-inch type is 7.1 mm thicker in depth. The 0.4-inch type is 3.0 mm wider in width. Since the location and size of mounting brackets and external connection
connectors are different, make sure that there are no interfering parts inside and outside the board.
4. Power Supply The 5.7-inch type is connected to the main body, not by terminal block
but by connector (bundled item). The 10.4-inch type has been changed to 24 V DC speci�cation.
If you use the GC7 at 100 V/200 V AC, use the optional EA-AC or prepare a commercial AC/DC power supply. (If the EA-AC is used, the depth of the product becomes the main body + 36.1 mm.)
5. Confirmation of PLC models PLCs that can be used are largely limited. Also, the shapes of connection
connectors are different. (M:N communications also cannot be used.)
6. Confirmation of peripheral devices The GC70 series has only one serial port. Also note that there are no parallel ports or RAS output / reset input.
- ScreenCreator5 is usable. The ScreenCreator5 drawing software has been upgraded. You can draw in the same way as with the GC-50 series.
7. Touch panel operation Since an analog-type touch panel is used, there are the following
restrictions. - You cannot press two, three, or four points at the same time. - The resolution of the touch panel is different. Since the GC50 series has a different resolution (16 x 12 or 32 x 24)
from the GC70 series (1,024 x 1,024), the operational feeling may be different.
8. When K-BASIC is used There are restrictions on usable instruction words.
9. When option products are used The digital I/O cannot be used. The backup data in a CF card is not compatible. If the data is backed
up by a CF card for the GC50 series, restore the screen data to ScreenCreator5 once. Each setting data needs to be reset for the GC70 series.
10.How to download screen data Screen data can be transferred via USB.
11.Other There may be restrictions in addition to the items mentioned above. Viewing angle of the screen, appearance of reduced / enlarged
characters, appearance of the black-and-white type (difference between blue type LCD and black-and-white mode), etc.
* When you change models, it is recommended that you check the operations using actual equipment once.
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
319
HMI
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2018The specifications and prices described in this catalog were valid when the catalog was issued.For the latest information, contact our sales persons or see our website.
GC-A
GC-7
EA7
HMI Lineup
Panel Computer
Programmable Touch Panel
HMI Software
GC-7Specifications
■How to Transfer Software① Read the screen data project using
ScreenCreator5 (Ver3.0 or later).② Change the target panel to the new model
(GC-73LM-R / GC-73LCL-R / GC-76LC) using ScreenCreator5 (Ver3.0 or later).
③ Recompile the screen data using ScreenCreator5 (Ver3.0 or later).
④ Download the compilation data to the new model using ScreenCreator5 (Ver3.0 or later).
* In a new model, it is not necessary to change to the download mode at hardware side like previous models.
If the computer and the display are connected via a USB cable and the data is downloaded from a computer, the display automatically changes to the download mode and automatically restarts after the completion of the download.
■Each Part Names and Descriptions
1 Power supply (24 V DC) Can be used for the power supply in the same conditions as GC-53L□3. 2 CF card slot The screen data can be uploaded/downloaded from a CF card. 3 AC power supply module (Option) Can be used with a power supply under the same conditions as the GC-56LC2. 4 Various LEDs You can check the power supply / status / transmission and reception. 5 Battery Retain clock data / SRAM. 6 Serial port For connection to a PLC 7 USB A port The screen data can be uploaded/downloaded from a USB memory. 8 USB B port The screen data can be uploaded/downloaded from drawing software.
■OptionsName Model Number
AC Power Supply Module EA-AC
Compact Flash EA-CF-CARD
D-sub Terminal Block Conversion Adaptor (For RS-422/485)
EA-COMCON-3
D-sub Angle Conversion Adaptor EA-ADPTR-4
Protection Sheet (Package of 3)
For 5.7-inch type EA-6-COV2
For 10.4-inch type EA-10-COV2
Surface Cover (Package of 3)
For 5.7-inch type GC-S3SH-32
For 10.4-inch type EA-10-COV3-SG ■Expendable SuppliesName Model Number
GasketFor 5.7-inch Type ーFor 10.4-inch Type EA-10-GSK-SG
For 10.4-inch Type EA-BRK-2G
Battery D2-BAT-1
Plug for Main Body Power Supply EA-DC-CON
Plug for AC Power Supply EA-AC-CON
■Connection CablesEA-2CBL SJ, DL05/06/205, SZ, PZCPU Modular 6-pin
EA-2CBL-1DL06/250-1/260,SZ-4M,PZ3 High-density D-sub 15-pin
EA-4CBL-1 D4-CPU programmer port D-sub 15-pin
EA-4CBL-2 D4-CPU general-purpose port D-sub 25-pin
EA-MITSU-CBL-2 Mitsubishi computer link D-sub 9P
EA-OMRON-CBL-1 D-sub 9-pin for Omron
Cable length: 3 m
Not in Use
4 Various LEDs3 AC Power Supply Module (Option)
7 USB A Port
8 USB B Port
5 Battery6 Serial Port
2 CF Card Slot 1
1 Power Supply (24 V DC)
Standard Expansion (Option is installed)
320
HMI
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
Visit our website ▼http://www.koyoele.co.jp/english/
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2018 Latest catalog (free) is available online.
GC-A
GC-7
EA7
HMI Lineup
Panel Computer
Programmable Touch Panel
HMI Software
GC-7Specifications
■Main Body SpecificationsModel Number GC-73LM-R GC-73LCL-R GC-76LC
Display
Device Size 5.7-inch 10.4-inch
Display Device STN monochrome LCD TFT color LCD
Display Color Black-and-white mode (15 gradations) 65,536 color
Number of Dots 320 x 240 (QVGA) 640 x 480 (VGA)
Brightness Control*1 Set from the system screen of the main body display. (Setting components can be arranged from the drawing software.)
BacklightCold-cathode tube Average life: Continuous lighting for 50,000 hours or longer / 25˚C
LED
Replacement of Backlight Impossible Possible
Touch Panel Analog resistive type, Resolution: 1,024 W x 1,024 H
External Interface
For PLC Connection Serial
SerialStart-stop synchronization, RS-232C, RS-422/485 (2/4-wire system), D-sub 15-pin (Female) x 1Data length: 7/8 bit, parity: None/Odd/Even, stop bit: 1/2 bitTransmission speed (bps): 1,200/2,400/4,800/9,600/19,200/38,400/57,600/115,200
Screen Data Transfer USB (B) 1.1 x 1
CF Card Slot 1 NoCompact Flash (Limited to 3.3 V) TYPE I/II x 1*2
USB USB (A) 1.1 x 1
General Specifications
Supply Voltage 24 V DC
Allowable Power Range 20.4 to 28.8 V DC, allowable ripple, within 100 mVp-p, allowable instantaneous power failure time, within 5 ms
Power ConsumptionApprox.9 W (24 V DC, at main body standalone operation)
Approx.10 W (24 V DC, at main body standalone operation)
Approx.17 W (24 V DC, at main body standalone operation)
Use Ambient Temperature 0 to 50˚C
Storage Ambient Temperature
-20 to 60˚C
Use / Storage Ambient Humidity
10 to 85% RH (No condensation)
Noise Resistance 1000 V AC p-p, pulse width 1 μs, rise time 1 ns, between DC power supply input terminal and FG terminal (Cased on noise simulator)
Withstand Voltage 1000 V AC, 1 min, between DC power supply input terminal and FG terminal
Insulation Resistance 10 MΩ or higher (500 V DC), between DC power supply input terminal and FG terminal
Vibration ResistanceCompliant with JIS C 0911, vibration acceleration: constant acceleration19.6 m/s2, frequency range: 5 to 55 Hz to 5 Hz, vibration time: vertical direction (Y direction) 4H, horizontal and font-back direction (X and Z direction) 2H, sweep cycle: 5 → 55 → 5, 1 octave / min (10%)
Impact ResistanceCompliant with JIS C 0912, maximum acceleration 98 m/s2 (10 G), duration of action: 11 ms, number of impacts: 10 times each in perpendicular direction
Electrostatic Discharge Resistance
Atmospheric discharge: 8 kV, application places: bezel, touch panel, contact discharge: 4 kV, application places: left/right and front/back of the panel
Surrounding Atmosphere in Place of Use
No corrosive gases
Grounding D-class grounding
Protective Structure IP65 (Only front, when gasket is used.)
Dimensions (mm) 197 W x 152 H x 54.1 D 299.0 W x 209.0 H x 70.0 D
Weight (g) 660 630 1480
Panel Cutout Dimensions (mm)
188.5 W x 143.5 H 285 W x 191 H
Cooling System Natural air-cooling
Compliant Standards
UL508 (Scheduled to acquire), EMC directive (CE marking; Self-declared), CE EN61131-2, EMI CISPR11 Class A, unnecessary radiation measurement, field intensity measurement, magnetic field strength measurement (EN55011)EMS susceptibility immunity measurement Class AEN61000-4-2 Electrostatic discharge immunity test, EN61000-4-3 Radiation magnetic field immunity test, EN61000-4-4 First transient burst immunity test, EN61000-4-5 Surge immunity test, EN61000-4-6 Conductivity immunity test
AccessoriesQSG (Quick Start Guide) manual Mounting brackets (4 units)Power plug
QSG (Quick Start Guide) manualMounting brackets (6 units)Power plug (Bundled with mounting brackets)
*1 Since this display uses a cold-cathode tube for the backlight, the brightness widely �uctuates according to the conditions shown below. Consider the described brightness as a target. Ambient temperature, installation angle of the product, elapsed time since power-on, duration of use of the product, and number of product power supply ON/OFF cycles*2 Only the speci�c card can be used. * Regarding the EA-AC speci�cations, see P.345.
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
321
HMI
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2018The specifications and prices described in this catalog were valid when the catalog was issued.For the latest information, contact our sales persons or see our website.
GC-A
GC-7
EA7
HMI Lineup
Panel Computer
Programmable Touch Panel
HMI Software
GC-7Specifications
■List of Connected DevicesManufacturer Series ScreenCreator5 ScreenCreator5 Properties of Project
Koyo
KOSTAC-SKoyo (KOSTAC S)
Koyo (CCM3)
DL SeriesKoyo (DL Series)
Koyo (DL Series MODBUS)
Mitsubishi
MELSEC-AnN Mitsubishi (AnN/AnS) (LINK)
MELSEC-AnS Mitsubishi (AnN/AnS) (LINK) (High speed communication)
MELSEC-AnA Mitsubishi (AnA/AnU) (LINK)
MELSEC-AnU Mitsubishi (AnA/AnU) (LINK) (High speed communication)
MELSEC-QnAMitsubishi (QnA) (LINK)
Mitsubishi (QnA) (LINK) (High speed communication)
MELSEC-QMitsubishi (QnA) (LINK)
Mitsubishi (QnA) (LINK) (High speed communication)
Omron
SYSMAC C Omron (C)
SYSMAC CQM1 Omron (C)
SYSMAC CS1 Omron (CS1)
Sharp New Satellite JWSharp (CPU direct connection)
Sharp (LINK)
JTEKT TOYOPUCJTEKT (PC2)
JTEKT (PC3)
Yaskawa Inverter Yaskawa (Inverter)
Yokogawa
FACTORY ACEYokogawa (CPU_No.*)
Yokogawa (CPU_No.*) (High speed communication)
FA-M3Yokogawa (CPU No. variable)
Yokogawa (CPU No. variable) (High speed communication)
Temperature ControllerYokogawa (CPU No. variable)
Yokogawa (CPU No. variable) (High speed communication)
Keyence KZ Series
Omron (C)
Mitsubishi (AnA,AnU) (LINK)
Mitsubishi (AnA,AnU) (LINK) (High speed communication)
Mitsubishi (AnN/AnS) (LINK)
Mitsubishi (AnN/AnS) (LINK) (High speed communication)
Toyo Denki Digital Controller Toyo Denki (μ-GPCH)
Supported PLCs as of May 2012Largely restricted compared with the GC50 series.If devices other than those above are connected, it is impossible to shift to the GC70 series.
322
HMI
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
Visit our website ▼http://www.koyoele.co.jp/english/
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2018 Latest catalog (free) is available online.
GC-A
GC-7
EA7
HMI Lineup
Panel Computer
Programmable Touch Panel
HMI Software
GC-7Dimensions
■Dimensions (Unit: mm)
GC-73L□-R
GC-76LC
EA-AC
Hole
GC-76LC
CF SLOT
GC-73LM-R
Hole
CF SLOT
93.0
76.2
36.1±0.5
14.7
197
339.5
188
315.7
152
280
143
47.1
7
42.7
130
10
188.5±0.3 4.34.3
8.8
8.8
143.5±0.3
4.3
4.3
256.2
319.5+1−0
109
109
159.75
10
10
9
9
260 +1−0
Hole
GC-76LC
CF SLOT
GC-73LM-R
Hole
CF SLOT
93.0
76.2
36.1±0.5
14.7
197
339.5
188
315.7
152
280
143
47.1
7
42.7
130
10
188.5±0.3 4.34.3
8.8
8.8
143.5±0.3
4.3
4.3
256.2
319.5+1−0
109
109
159.75
10
10
9
9
260 +1−0
CF SLOT
CF SLOT
CF SLOT
CF SLOT
CF SLOT
Hole
Hole
Hole
5.7 inch
12.1 inch
15.0 inch
8.4 inch
Hole
10.4 inch
Hole
299
284
209 190
339.5
370.6
396.8
280
310.8
60
10
285±0.512 12
7 7142.5
95.5
12 9
12
9
191±0.5
258.5
203.4
232.6 8
44.1
191152
152
177.6 5
38.1
177.6
89.9
138.6
179+1−06
15 156
6
6
22
22
140 +1−0
11.8
11.8
10
10
179.7 +1−0
117.5235+1
−010 1011.8 11.8
256.2
285.2
315.7 10
42.7
10
42
159.75319+1
−0910 10
187374+1
−0911.4 11.4
9
130
10
10
9
9
260 +1−0
144
11.4 9.5
11.4
9.5
288 +1−0
9
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
323
HMI
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2018The specifications and prices described in this catalog were valid when the catalog was issued.For the latest information, contact our sales persons or see our website.
GC-A
GC-7
EA7
HMI Lineup
Panel Computer
Programmable Touch Panel
HMI Software
GC-7Correlation
■Compatibility with the GC50 SeriesItems
5.7-inch Monochrome 5.7-inch Color
Compatibility GC-53LM3 GC-73LM-R Compatibility GC-53LC3 GC-73LCL-R
Appearance △ Light gray Gray △ Light gray Gray
Dimensions (mm) △ 197.0 W x 152.0 H x 47.0 D197.0 W x 152.0 H x 54.1 D*Slightly thick
△ 197.0 W x 152.0 H x 47.0 D197.0 W x 152.0 H x 54.1 D*Slightly thick
Panel Cutout Dimensions (mm) ○ 188.5±0.3 W x 143.5±0.3 H ○ 188.5±0.3 W x 143.5±0.3 H
Mounting Brackets × Both the position and shape are different. × Both the position and shape are different.
Power Supply ○ 24 V DC ○ 24 V DC
Connector × Terminal block Connector × Terminal block Connector
LCD Panel △ 5.7” (Blue, single gradation)5.7” (Black-and-white mode, 15 gradations)
○ 5.7” color 5.7” color
View Angle △30˚ (up/down)30˚ (left/right)Room temperature (25˚C)
20˚ (up)40˚ (down)45˚ (left/right)Room temperature (25˚C)
△25˚ (up)70˚ (down)35˚ (left/right)Room temperature (25˚C)
20˚ (up)35˚ (down)50˚ (left/right)Room temperature (25˚C)
Brightness △ 300 cd/m2 150 cd/m2 △ 250 cd/m2 200 cd/m2
Life ○ 50,000 hours ○ 30,000 hours 50,000 hours
Touch Panel × Matrix (16 x 12 pieces) Analog type × Matrix (16 x 12 pieces) Analog type
Serial Port 1 △ D-sub 9-pin (Female) D-sub 15-pin (Female) △ D-sub 9-pin (Female) D-sub 15-pin (Female)
Serial Port 2 × Terminal block (RS-422/485) None × Connector (RS-422/485) None
Screen Data Transfer △ Serial Port 1 USB (B) △ Serial Port 1 USB (B)
CF Card △ The option is required.
NoneCan be substituted with a USB memoryThere is no data compatibility with conventional models.
△ The option is required.
NoneCan be substituted with a USB memoryThere is no data compatibility with conventional models.
Digital Input/Output × The option is required. None × The option is required. None
Drawing Software △ ScreenCreator5ScreenCreator5 Ver3.0 or later
△ ScreenCreator5ScreenCreator5 Ver3.0 or later
Items10.4-inch Color
Compatibility GC-56LC2 GC-76LC
Appearance Gray Gray
Dimensions (mm) △ 296.0 W x 209.0 H x 77.5 D 299.0 W x 209.0 H x 70.0 D
Panel Cutout Dimensions (mm) ○ 285.0±0.5 W x 191.0±0.5 H
Mounting Brackets × Both the position and shape are different.
Power Supply △ 100 V/200 V AC
24 V DC*When used with 100 V/ 200 V AC, the optional EA-AC is required.
Connector × Terminal block Connector
LCD Panel ○ 10.4” color 10.4” color
View Angle ○30˚ (up)20˚ (down)45˚ (left/right)Room temperature (25˚C)
65˚ (up)45˚ (down)65˚ (left/right)Room temperature (25˚C)
Brightness ○ 200 cd/m2 270 cd/m2
Life ○ 25000 hours 50000 hours
Touch Panel × Matrix (32 x 24 pieces) Analog type
Serial Port 1 △ D-sub 9-pin (Female) D-sub 15-pin (Female)
Serial Port 2 × Terminal block (RS-422/485) None
Serial Port 3 × The option is required. None
Screen Data Transfer △ Serial Port 1 USB (B)
CF Card △ The option is required.
AvailableCan be substituted with a USB memoryThere is no data compatibility with conventional models.
Digital Input/Output × The option is required. None
Parallel Ports × Available None
RAS Output× Available None
Reset Input
Drawing Software △ ScreenCreator5ScreenCreator5 Ver3.0 or later
324
HMI
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
Visit our website ▼http://www.koyoele.co.jp/english/
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2018 Latest catalog (free) is available online.
GC-A
GC-7
EA7
HMI Lineup
Panel Computer
Programmable Touch Panel
HMI Software
EA7Features
Programmable Touch Panel- Full line-up of TFT models from 5.7-inch to 15.0-inch The 5.7-inch type has a STN black-and-white model.- Screen transfer: Ethernet / USB- PLC connection: Ethernet / Serial- Screen storage media: Built-in memory / Expansion CF- Sound output: Equipped as a standard
(Excluding the EA7-S6M-RS, EA7-S6M-RS)- Protection level: IP65
■FeaturesVarious Files Can be Used.Since various �les such as image �les (bmp) and audio �les (wav) can be used, you can create more realistic screens.
Abundant ComponentsVarious components can be graphically expressed.
Easy Downloads / UploadsWith no wasteful settings, you can immediately upload/download data by selecting a button. Owing to the USB and Ethernet connections, a long transfer time is not required.
Large-size Screen DisplayThe 15-inch screen can display large characters that are easily visible.
Simulation on ComputerScreen operation can be checked from a computer without the actual equipment. It is not necessary to prepare and connect the actual equipment to perform the simulation on the computer.
Password SettingAll patterns of password settings can be performed on one screen.Since the password can be set on eight levels, it is easy to create screens such as one that can be operated only by the administrator.
■Software Outline① 3 Step Bar You can select what to do now from the start of a project to
the mounting to displays by pressing the Step1 Start, Step2 Simulation, and Step3 Send buttons.
② Navigation Window This window shows details of the screen, important menus of
the ViewJetCmore software, etc.
③ Configuration Window The components can be selected by pushing one button and
can even be overlap. Enjoy the free space.
④ List Window You can select from various components at a glance. By
dragging components to the drawing window, you can create screens as you wish.
⑤ Parts List Window This window shows parts design that corresponds to the list
of objects.
Multilingual UtilizationA combination of up to nine languages or fonts can be registered.*1 The characters displayed on the screen can be switched according to patterns. Since characters are only changed on the same screen, the number of screens can be minimized.Supported languages: Japanese, Chinese, Taiwanese, English, Korean, Spanish and Thai
*1 When one language will be additionally used, the CF card needs to be added. (Example: Japanese
and Chinese)
Use of Memory CardsThe data can be exchanged using a memory card. Since no computer is needed for the operation, the operator can work under reduced burden.
Use of CSV FilesSince the data managed by ViewJetCmore (tag, message, alarm, and language) can be stored and edited in CSV format, you can edit the data in a familiar environment.
View of the Display ScreenThe screen data installed in the display can be viewed on computers and PDAs from a remote place. Other than the screen currently displayed, the backside screen can also be viewed.
Setting Up Connected DevicesThe connections of ViewJetCmore or PLCs can be visually checked and set. The connected devices can be easily set without wondering what to do.
①
④
②⑤
③
[Common to all model number]- Touch panel Analog resistive type- CE marking compliant
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
325
HMI
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2018The specifications and prices described in this catalog were valid when the catalog was issued.For the latest information, contact our sales persons or see our website.
GC-A
GC-7
EA7
HMI Lineup
Panel Computer
Programmable Touch Panel
HMI Software
EA7Specifications
■Each Part Names and Descriptions
1 Power supply (24 V DC) The slim body drives the display. 2 AC power supply module Can drive the display around the world according to the environment. 3 CF card slot 1 Used for uploading/downloading screen data and saving measured data. 4 CF card module For saving larger-capacity data. (Option) 5 CF card slot 2 Used for saving measured data. 6 Extended module adapter Expansion-adapter for 4CF card modules. 7 Ethernet port Enables screen data uploads/downloads, uploading of measured data, and connections with PLCs at high speed. 8 USB A port Measured data can be saved in a USB memory that is convenient to carry around. 9 USB B port Screen data can be uploaded/downloaded. The data can be exchanged comfortably at high speed.10 Audio output Noti�ed not only by displayed alarms but also by sound.11 Serial port Makes connection with the PLC possible.
Example of the Utility 3 CF card slot 1 [Example of data that can be used in CF cards] Screen data, Logging data 5 CF card slot 2 [Example of data that can be used in CF cards] Logging data 9 USB A port [Example of data that can be used in USB memorys] Logging data
4 CF Card Module
5 CF Card Slot 2
6 Extended Module Adapter
2 AC Power Supply Module
10 Audio Output
7 Ethernet Port
11 Serial Port
8 USB A Port
9 USB B Port Power Supply
(24 V DC)Status LED
3 CF Card Slot 1CF Cover
Expansion Module Cover
1 Power Supply (24 V DC)
Standard Shape
Maximum Expansion Shape
Expansion (Option is installed)
■OptionName Model Number
AC Power Supply Module EA-AC
Extended Module Adapter EA-EXP-OPT
CF Card Module EA-CF-IF
D-sub Terminal Block Conversion Adaptor(For RS-422/485)
EA-COMCON-3
D-sub Angle Conversion Adaptor EA-ADPTR-4
Surface Protection Sheet(Nonglare)(Package of 3)
For 5.7-inch Type EA-6-COV2
For 8.4-inch Type EA-8-COV2
For 10.4-inch Type EA-10-COV2
For 12.1-inch Type EA-12-COV2
For 15.0-inch Type EA-15-COV2
Anti-oil Cover(Package of 1)
For 5.7-inch Type EA-6-COV3-S
For 8.4-inch Type EA-8-COV3-S
For 10.4-inch Type EA-10-COV3-SG
For 12.1-inch Type EA-12-COV3
For 15.0-inch Type EA-15-COV3-S
Compact Flash EA-CF-CARD
■Maintenance Product (Provided with the Main Body When Purchased)
Name Model Number
Packing
For 5.7-inch Type EA-6-GSK-S
For 8.4-inch Type EA-8-GSK-S
For 10.4-inch Type EA-10-GSK-SG
For 12.1-inch Type EA-12-GSK
For 15.0-inch Type EA-15-GSK-S
Battery D2-BAT-1
Plug for Main Body Power Supply EA-DC-CON
Plug for AC Power Supply EA-AC-CON
Mounting brackets for 5.7-inch (2 units) EA-BRK-1
Mounting brackets for 8.4-inch, 12.1-inch, and 15.0-inch type (8 units)
EA-BRK-2
326
HMI
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
Visit our website ▼http://www.koyoele.co.jp/english/
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2018 Latest catalog (free) is available online.
GC-A
GC-7
EA7
HMI Lineup
Panel Computer
Programmable Touch Panel
HMI Software
■Main Body SpecificationsModel Number EA7-S6M-RS EA7-T6CL-RS EA7-S6M-S EA7-T6CL-S EA7-T8C-S
Display
Device Size 5.7-inch 8.4-inch
Display Device STN monochrome LCD TFT color LCD STN monochrome LCD TFT color LCD
Display Color/Gradation 15 gray gradations 65,536 color 15 gray gradations 65,536 color
Number of Dots 320 x 240 (QVGA) 640 x 480 (VGA)
Brightness Control Set from the configuration screen of the main body display. (Setting components can be arranged from the drawing software.)
Backlight*1 Cold-cathode tube LED Cold-cathode tube LED
Replacement of Backlight Impossible Possible
Automatic Turn-off Function Set from the configuration screen of the main body display. (Can be set from the drawing software.)
Touch Panel Analog resistive type, resolution: 1,024 W x 1,024 H
Interfaces
For PLC Connection
SerialStart-stop synchronization, RS-232C, RS-422/485 (2/4-wire system), D-sub 15-pin (Female) x 1*2
Data length: 7/8 bit, parity: None/Odd/Even, stop bit: 1/2 bitTransmission speed (bps): 2,400/4,800/9,600/19,200/38,400
Ethernet No Ethernet 10BASE-T/100BASE-TX (RJ-45, Category 5) x 1*3
Screen Data Transfer
USB USB (B) 1.1 x 1
Ethernet No Ethernet 10BASE-T/100BASE-TX (RJ-45, Category 5) x 1*3
For Printer Connection No
CF Card Slot 1 No Compact Flash (Limited to 3.3 V) TYPE I/II x 1
CF Card Slot 2 No Compact Flash (Limited to 3.3 V) TYPE I/II x 1 (Option)
Ethernet No Ethernet 10BASE-T/100BASE-TX (RJ-45, Category 5) x 1*3
USB USB (A) 1.1 x 1*4
Line Output No Stereo output: Pin-jack x 1
General Specifications
Supply Voltage 24 V DC (100/200 V AC power supply module is available as an option: EA-AC)
Allowable Power Range 20.4 to 28.8 V DC, allowable ripple, within 100 mVp-p, allowable instantaneous power failure time, within 5 ms
Allowable Instantaneous Power Failure Time
Within 5 ms
Power Consumption 9 W or lower 10 W or lower 10 W or lower 13 W or lower 15 W or lower
Use Ambient Temperature 0 to 50˚C*5
Storage Ambient Temperature -20 to 60˚C
Use / Storage Ambient Humidity 10 to 85% RH (No condensation)
Noise Resistance 1000 V AC p-p, pulse width 1 μs, rise time 1 ns, between DC power supply input terminal and FG terminal (Cased on noise simulator)
Withstand Voltage 1000 V AC, 1 min, between DC power supply input terminal and FG terminal
Insulation Resistance 20 MΩ or higher (500 V DC), between DC power supply input terminal and FG terminal
Vibration Resistance Comply with IEC61131-2, 10 to 57 Hz: 0.075 mm, 57 to 150 Hz: 9.8 m/s2 (10 times each for the X, Y, and Z direction)
Impact Resistance Maximum 147 m/s2, 11 ms (2 times each for the X, Y, and Z direction)
Electrostatic Discharge Resistance Compliant with IEC61000-4-2, contact: 4 kV, air: 8 kV
Surrounding Atmosphere in Place of Use No corrosive gases
Grounding D-class grounding
Protective Structure Equivalent to IP65 (Surface part)
Dimensions (mm) 191.0 W x 152.0 H x 43.1 D 258.5 W x 203.4 H x 52.1 D
Weight (g) 630 600 650 650 1,090
Panel Cutout Dimensions (mm)*7 179.0 W x 140.0 H 235.0 W x 179.7 H
Cooling System Natural air-cooling
Compliant Standards
UL508, EMC directive (CE marking; Self-declared), CE EN61131-2, EMI CISPR11 Class A, unnecessary radiation measurement, field intensity measurement, magnetic field strength measurement (EN55011)EMS susceptibility immunity measurement Class AEN61000-4-2 Electrostatic discharge immunity test, EN61000-4-3 Radiation magnetic field immunity test, EN61000-4-4 First transient burst immunity test, EN61000-4-5 Surge immunity test, EN61000-4-6 Conductivity immunity test
AccessoriesQSG (Quick Start Guide) manualMounting brackets (2 units)Power plug
QSG (Quick Start Guide) manualMounting brackets (6 units)Power plug
EA7Specifications
■Software RequirementsPersonal Computer Models for which Windows normally operates (PC/AT compatibles), Pentium II 333 MHz or higher are recommended.
OS Japanese/English Microsoft Windows 2000 with Service Pack 4 (SP4) or Windows XP(Home Edition/Professional Edition), Windows Vista (32-bit version)/Windows 7/8/8.1 (32/64-bit version, After Ver 2.25+SP 10)
Resolution XGA 1,024 x 768 or higher is recommended
HD disc free space Free space of 300 MB or more (600 MB or more is recommended.)
Memory Equipped with 128 MB (512 MB or more is recommended.)
Disc Drive CD-ROM drive
Network Environment TCP/IP protocol
* The computer must have an USB (A) port or Ethernet port.
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
327
HMI
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2018The specifications and prices described in this catalog were valid when the catalog was issued.For the latest information, contact our sales persons or see our website.
GC-A
GC-7
EA7
HMI Lineup
Panel Computer
Programmable Touch Panel
HMI Software
EA7-T10C-SG EA7-T12C-S EA7-T15C-S
10.4-inch 12.1-inch 15.0-inch
800 x 600 (SVGA) 1,024 x 768 (XGA)
4,096 W x 4,096 H
17 W or lower 20 W or lower 33 W or lower
299 W x 209 H x 70 D 339.5 W x 280.0 H x 52.7 D 396.8 W x 310.8 H x 52.0 D
1480 1980 3030
285 W x 191 H 319.5 W x 260.0 H 374.0 W x 288.0 H
QSG (Quick Start Guide) manualMounting brackets (8 units)Power plug
■Power Supply Module SpecificationsEA-AC
100/200 V AC
85 to 240 V AC
Within 40 ms
Maximum 64 VA
0 to 50˚C
-20 to 60˚C
10 to 85% RH (No condensation)
1000 V AC p-p, pulse width 1 μs, rise time 1 ns (Cased on noise simulator)
1000 V AC, 1 min, between AC power supply input terminal and FG terminal
20 MΩ or higher (500 V DC), between AC power supply input terminal and FG terminal
Comply with IEC61131-2, 10 to 57 Hz: 0.075 mm, 57 to 150Hz: 9.8 m/s2 (10 times each for the X, Y, and Z direction)
Maximum 147m/s2 11ms (2 times each for the X, Y, and Z direction)
Compliant with IEC61000-4-2, contact: 4 kV, air: 8 kV
No corrosive gases
D-class grounding
93.0 W x 76.2 H x 36.1 D*6
170
Natural air-cooling
UL508, EMC directive (CE marking; Self-declared), CE EN61131-2
Operation manual, Power plug
*1 Average life: Continuous lighting for 100,000 hours or longer/25˚C, 24 hour continuous lighting *2 Any one of RS-232C/422/485 can be used. *3 Combined use *4 Only connectible devices are some commercially available keyboards, barcode readers, and memory
cards.*5 0 to 40˚C in the case of EA7-T15CL-S *6 Dimensions when attached to the main body of display *7 Error tolerance +1 mm, -0 mm.
EA7Specifications
■Connection CableEA-2CBL SJ, DL05/06/205, SZ, PZCPU Modular 6-pin
EA-2CBL-1DL06/205-1/260,SZ-4M,PZ3 High-density D-sub 15-pin
EA-4CBL-1 D4-CPU programmer port D-sub 15-pin
EA-4CBL-2 D4-CPU general-purpose port D-sub 25-pin
EA-MITSU-CBL-1 Mini DIN for Mitsubishi FX PLC
EA-MITSU-CBL-2 Mitsubishi computer link D-sub 9-pin
EA-OMRON-CBL-1 D-sub 9-pin for Omron
Cable length: 3 m
328
HMI
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
Visit our website ▼http://www.koyoele.co.jp/english/
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2018 Latest catalog (free) is available online.
GC-A
GC-7
EA7
HMI Lineup
Panel Computer
Programmable Touch Panel
HMI Software
EA7Specifications
■List of Connected DevicesDevice Manufacturer PLC Series
CPU Direct Connection
Serial Module
Ethernet Module
PLC
Koyo
DL05/06/205 (Ethernet requires an ECOM module.) ○ ○ ○KOSTAC D4 series (Ethernet requires an ECOM module.) ○ ○ ○PZ series, SJ series ○ KOSTAC D3 series ○
Mitsubishi
FX series, Q series*1 CPU direct connection ○ FX series, A series, Q series, QnA series Computer link ○ A series, Q series, QnA series Ethernet interface unit ○
Omron
C series HostLink ○ CS series, CJ series CPU unit built-in port ○ CS series Link unit ○ C series PC card unit ○CS series Ethernet unit ○
PanasonicFP series ○ FP series ET-LAN unit ○
YokogawaFA-M3 series Serial communication module, CPU port ○ FA-M3 series Ethernet ○
Keyence
KZ series, KV series Link unit, CPU direct connection ○ ○ KV series (KV-700/1000) CPU direct connection ○ KV series (KV-3000/5000) ○ ○ ○
JTEKT
TOYOPUC PC2/PC3 series Serial ○ TOYOPUC PC2/PC3 series Ethernet ○TOYOPUC PC10G series ○
SharpJW-20 JW-30 JW-50/70/100 series Communication module ○ JW-20 JW-30 JW-50/70/100 series Ethernet module ○
ToshibaProsec T, V series Serial ○ Prosec T, V series Ethernet ○
Toshiba Machine TCmini, TC200 ○
YaskawaGL, MP, CP series Serial ○ GL, MP, CP series Ethernet ○
AB
MicroLogix 1000/1200/1500, SLC 500, 5/01, /02, /03 (DH485) ○ MicroLogix 1000, 1200, 1500 (DF1) ○ SLC 5/03, /04, /05, PLC-5 (w/DF1) ○
Entivity (Think&Do) H2-WinPLC (Modbus, Ethernet) ○ ○GE 90/30, 90/70 ○
Modicon984 CPU, Quantum 113 CPU, AEG Modicon Micro Series ○ 110 CPU: 311-xx, 411-xx, 512-xx, 612-xx ○
Siemens S7-200PPI, S7-300MPI ○ ○Modbus TCP/IP Modbus TCP/IP devices ○Generic EtherNet/IP EtherNet/IP (AB ENET IP) ○
CNC FANUC 18i-LNB series (CNC) ○
Temperature Control
Azbil Corporation SDC36/26 (Temperature controller) ○ RKC INSTRUMENT INC. CB100 (Temperature controller) ○
For the details about supported PLCs, contact our customer support center.
*1 The Q00CPU, Q00JCPU, and Q01CPU are not supported.
Barcode ReaderOnly barcode readers with a USB keyboard interface can be used. The following barcode reader was already tested by Koyo Electronics.
Manufacturer Model Number
Symbol Technology LS2208
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
329
HMI
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2018The specifications and prices described in this catalog were valid when the catalog was issued.For the latest information, contact our sales persons or see our website.
GC-A
GC-7
EA7
HMI Lineup
Panel Computer
Programmable Touch Panel
HMI Software
■Dimensions (Unit: mm)
5.7-inch
8.4-inch
10.4-inch
12.1-inch
15.0-inch
EA7Dimensions
CF SLOT
CF SLOT
CF SLOT
CF SLOT
CF SLOT
Hole
Hole
Hole
5.7 inch
12.1 inch
15.0 inch
8.4 inch
Hole
10.4 inch
Hole
299
284
209 190
339.5
370.6
396.8
280
310.8
60
10
285±0.512 12
7 7142.5
95.5
12 9
12
9
191±0.5
258.5
203.4
232.6 8
44.1
191152
152
177.6 5
38.1
177.6
89.9
138.6
179+1−06
15 156
6
6
22
22
140 +1−0
11.8
11.8
10
10
179.7 +1−0
117.5235+1
−010 1011.8 11.8
256.2
285.2
315.7 10
42.7
10
42
159.75319+1
−0910 10
187374+1
−0911.4 11.4
9
130
10
10
9
9
260 +1−0
144
11.4 9.5
11.4
9.5
288 +1−0
9
CF SLOT
CF SLOT
CF SLOT
CF SLOT
CF SLOT
Hole
Hole
Hole
5.7 inch
12.1 inch
15.0 inch
8.4 inch
Hole
10.4 inch
Hole
299
284
209 190
339.5
370.6
396.8
280
310.8
60
10
285±0.512 12
7 7142.5
95.5
12 9
12
9
191±0.5
258.5
203.4
232.6 8
44.1
191152
152
177.6 5
38.1
177.6
89.9
138.6
179+1−06
15 156
6
6
22
22
140 +1−0
11.8
11.8
10
10
179.7 +1−0
117.5235+1
−010 1011.8 11.8
256.2
285.2
315.7 10
42.7
10
42
159.75319+1
−0910 10
187374+1
−0911.4 11.4
9
130
10
10
9
9
260 +1−0
144
11.4 9.5
11.4
9.5
288 +1−0
9
CF SLOT
CF SLOT
CF SLOT
CF SLOT
CF SLOT
Hole
Hole
Hole
5.7 inch
12.1 inch
15.0 inch
8.4 inch
Hole
10.4 inch
Hole
299
284
209 190
339.5
370.6
396.8
280
310.8
60
10
285±0.512 12
7 7142.5
95.5
12 9
12
9
191±0.5
258.5
203.4
232.6 8
44.1
191152
152
177.6 5
38.1
177.6
89.9
138.6
179+1−06
15 156
6
6
22
22
140 +1−0
11.8
11.8
10
10
179.7 +1−0
117.5235+1
−010 1011.8 11.8
256.2
285.2
315.7 10
42.7
10
42
159.75319+1
−0910 10
187374+1
−0911.4 11.4
9
130
10
10
9
9
260 +1−0
144
11.4 9.5
11.4
9.5
288 +1−0
9
CF SLOT
CF SLOT
CF SLOT
CF SLOT
CF SLOT
Hole
Hole
Hole
5.7 inch
12.1 inch
15.0 inch
8.4 inch
Hole
10.4 inch
Hole
299
284
209 190
339.5
370.6
396.8
280
310.8
60
10
285±0.512 12
7 7142.5
95.5
12 9
12
9
191±0.5
258.5
203.4
232.6 8
44.1
191152
152
177.6 5
38.1
177.6
89.9
138.6
179+1−06
15 156
6
6
22
22
140 +1−0
11.8
11.8
10
10
179.7 +1−0
117.5235+1
−010 1011.8 11.8
256.2
285.2
315.7 10
42.7
10
42
159.75319+1
−0910 10
187374+1
−0911.4 11.4
9
130
10
10
9
9
260 +1−0
144
11.4 9.5
11.4
9.5
288 +1−0
9
CF SLOT
CF SLOT
CF SLOT
CF SLOT
CF SLOT
Hole
Hole
Hole
5.7 inch
12.1 inch
15.0 inch
8.4 inch
Hole
10.4 inch
Hole
299
284
209 190
339.5
370.6
396.8
280
310.8
60
10
285±0.512 12
7 7142.5
95.5
12 9
12
9
191±0.5
258.5
203.4
232.6 8
44.1
191152
152
177.6 5
38.1
177.6
89.9
138.6
179+1−06
15 156
6
6
22
22
140 +1−0
11.8
11.8
10
10
179.7 +1−0
117.5235+1
−010 1011.8 11.8
256.2
285.2
315.7 10
42.7
10
42
159.75319+1
−0910 10
187374+1
−0911.4 11.4
9
130
10
10
9
9
260 +1−0
144
11.4 9.5
11.4
9.5
288 +1−0
9
330
HMI
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
Visit our website ▼http://www.koyoele.co.jp/english/
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2018 Latest catalog (free) is available online.
Visual Scope
HMI Lineup
Panel Computer
Programmable Touch Panel
HMI Software
Visual ScopeFeatures
Communication, HMI and Data Collection Software- High speed, nimble software full of flexibility and expandability- Simple, highly functional software that supports various
connection configurations- Most suitable for creating ladder-free data logging systems- Check on-site conditions in real-time.
■FeaturesPLC Communication Software [Visual Scope PLC Driver]Visual Scope PLC Driver is software that operates on Windows95/98/Me/NT4.0/2000/XP to establish communications between computers and PLCs.Visual Scope can eliminate troublesome communication software creation and largely reduce application development man-hours. Also, Visual Scope has DLL functions for communication as a standard feature, so it can be used in various development environments.
《Supported PLC models》 Koyo SJ/DL/D4/20 series Mitsubishi A/Q/FX series Omron C/CV/CS/CJ series Keyence KZ-300/KZ-A500 Yokogawa FA-M3 series Matsushita FP series JTEKT PC2 series Sharp JW series Toshiba T series
Yaskawa GL/MP/CP series
A Collection of Web-compatible HMI Components [Visual Scope ACX]
Visual Scope ACX is a collection of ActiveX control components.Therefore, you can create operation and monitoring screens using development tools that allow the use of ActiveX control such as FrontPage and Visual Basic.Moreover, in combination with Visual Scope PLC Driver, you can remotely monitor the collection on Internet Explorer.-Secondary distribution is free (when Visual Basic is used).
A Collection of HMI Components
[Visual Scope OCX]Visual Scope OCX is a collection of software components that operate on Visual Basic and Excel.Instrumentation components often used in production sites are compactly contained. Only with the selection and pasting of components and simple setting, you can create advanced operation and monitoring screens.- Visual Basic4.0/5.0/6.0/2010 compatible- Excel97/2000/XP/2003/2007 compatible- Secondary distribution is free (when Visual Basic is used).
A Collection of Data and Display Components
[Visual Scope LOG]Visual Scope LOG is a collection of software components for collecting data and displaying collected data on Visual Basic and Excel.It eliminates troublesome programming and can collect, save, and display data for PLCs. Since the data is saved in Access97 format, it can be freely searched and processed.- Visual Basic4.0/5.0/6.0/2010 compatible- Excel97/2000/XP/2003/7 compatible
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
331
HMI
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2018The specifications and prices described in this catalog were valid when the catalog was issued.For the latest information, contact our sales persons or see our website.
Visual Scope
HMI Lineup
Panel Computer
Programmable Touch Panel
HMI Software
Visual ScopeSpecifications
■Software RequirementsBasic Software
OS Microsoft Windows2000 or Microsoft Windows XP/Vista/7 by 32-bit that corresponds to the computer main body
Software Microsoft, Visual Basic 5.0/6.0/2010, Excel2000/2003/2007/2010
Computer Main Body
CPU Computers equipped with 1 GHz or higher
Memory RAM 1 GB or larger
External Memory UnitsHard disk: Free space of 20 MB or larger
CD-ROM drive
External Interface Communication port (RS-232C, RS-422, Ethernet, etc., I/F that conforms to the connection configuration of the PLC)
USB port (For license key connection)
■SpecificationsName Model Number Specifications Price
HMI Tool Visual Scope OCX
VS-OCX1 OCX for HMI (7 kinds) Open
Data Collection Package Visual Scope LOG
VS-LOG1 OCX for data collection (3 kinds) Open
ActiveX-supporting HMI Tool Visual Scope ACX
VS-ACX1 ActiveX for HMI (8 kinds) Open
PLC Communication Driver Visual Scope PLC Driver (Supports RS-232C/RS-422 Connection, In-house LAN and Modem.)
VS-DDE1-KE1DDE server for the PLC DL/S/D3 series made by Koyo ElectronicsSupported protocol: Protocol dedicated to programmer (K sequence), CCM2 protocol, MODBUS
Open
VS-DDE1-ME1DDE server for the PLC A/Q/FX series made by Mitsubishi Electric CorporationSupported protocol: Protocol format 1 and format 4 dedicated to the computer link unit
Open
VS-DDE1-OM1DDE server for the PLC C/CV series made by Omron CorporationSupported protocol: C-mode command .........................................
Open
VS-DDE1-NA1DDE server for the PLC FP series made by Matsushita Electric Works Supported protocol: MEWTOCOL .................................................
Open
VS-DDE1-YE1DDE server for the PLC FA-M3 series made by Yokogawa Electric Corporation Supported protocol: Yokogawa computer link .................................
Open
VS-DDE1-KY1DDE server for the PLC KZ-300 made by Keyence Corporation (VS-DDE1-ME1 is used for the KZ-A500.) Supported protocol: Link mode ......................................................
Open
VS-DDE1-TP1DDE server for the PLC PC2 series made by JTEKT Corporation Supported protocol: Computer link .................................................
Open
VS-DDE1-SP1DDE server for the PLC new satellite JW-20, JW-30, JW-50/70/100 series made by Sharp Corporation Supported protocol: Computer link (Command mode)
Open
VS-DDE1-TS1DDE server for the PLC T series made by Toshiba Corporation Supported protocol: Computer link .................................................
Open
VS-DDE1-YS1DDE server for the PLC GL/MP/CP series made by YASKAWA Electric Corporation Supported protocol: MEMOBUS (RTU) ...........................................
Open
PLC Communication Driver Visual Scope PLC Driver (Supports Ethernet connection and in-house LAN.)
VS-DDE1-KE2DDE server for the PLC DL/D4 series made by Koyo Electronics Supported protocol: ECOM,EBC .................................................
Open
VS-DDE1-ME2DDE server for the PLC A/Q series made by Mitsubishi Electric CorporationSupported protocol: Ethernet interface unit E71
Open
VS-DDE1-OM2DDE server for the PLC SYSMAC α made by Omron CorporationSupported protocol: FINS ..............................................................
Open
VS-DDE1-NA2DDE server for the PLC FP series made by Matsushita Electric Works Supported protocol: MEWTOCOL ..................................................
Open
VS-DDE1-YE2DDE server for the PLC FA-M3 series made by Yokogawa Electric Corporation Supported protocol: Yokogawa computer link .................................
Open
VS-DDE1-SP2DDE server for the PLC new satellite JW-20, JW-30, JW-50/70/100 series made by Sharp Corporation Supported protocol: Computer link (Command mode)
Open
VS-DDE1-TS2DDE server for the PLC T series made by Toshiba Corporation Supported protocol: Computer link .................................................
Open
VS-DDE1-YS2DDE server for the PLC GL/MP/CP series made by YASKAWA Electric Corporation Supported protocol: MEMOBUS (RTU) ...........................................
Open
Package* VS-CDKIT-USB License key dedicated to the USB port ........................................... Open
* Need to indicate package type when you order.