NVC Catalogue Issue 6

NVC Lighting LimitedNVC Park 201Hollymoor WayRuberyBirminghamB31 5HEUK

T +44 (0)121 457 6340F +44 (0)121 453 1325www.nvcuk.com ISSUE 06

ISSUE

06

NVC and the NVC logo are registered trade marks of NVC Lighting TechnologyCorporation, NVC Industrial Park, Ruhu Town, Huizhou City, Guangdong, China

Sales:T +44 (0)121 457 6340F +44 (0)121 453 1325E [email protected]

Accounts:T +44 (0)121 457 6341F +44 (0)121 457 6342E [email protected]

Lighting Design:T +44 (0)121 457 6343E [email protected]

Technical:T +44 (0)121 457 6344E [email protected]

CO

NT

AC

T

NVC_COVER.qxp:FRONT COVER 22/4/13 13:23

ww

w.n

vcuk

.com

|+44

(0)1

21457

634

0

Our industry is changing nowmore rapidly than ever

First, you, our customers are demanding more and more. More performance andenergy efficiency, more variety and more service.

Secondly, LEDs have reached the point where they are accepted as a viable(often the preferred) light source for most applications. This enables us to bring youlevels of performance and longevity that just a few years ago were unheard of.

This catalogue, our sixth in just five years,reflects your changing demands and ourresponse to LED technology. In it you will find:

- Over 30 completely new product ranges

- A new section of fittings for prisons,police stations and other physicallydemanding areas

- A dedicated and enlarged section of exteriorlighting, and a separate flood-light section

- More LED fittings in all sections

- Clear indication of which fittings qualify forEnhanced Capital Allowances, with the“ECA Symbol”

Besides a rapidly expanding product range,other aspects of NVC are evolving rapidly sothat we can support you better. We have:

- Expanded our free lighting design serviceby 50%

- Invested in additional transport to improveour delivery service

- Increased our use of leading brand componentsfrom companies such as Tridonic, Helvar, Philipsand Mackwell

- Expanded our in-house assembly facilities so wecan offer a wider choice of specialist fittings

Finally, you would be welcome to come andvisit us. We have extensive meeting facilities andthe opportunity to meet our technical teamand our lighting designers is usually beneficialfor all concerned.

We look forward to seeing you.

NVC_COVER.qxp:FRONT COVER 22/4/13 13:23

3

NVC

CO

nt

En

tS

www.nvcuk

.com

|+44(0)121

457

634

0

BISMARCKpage 8

CLINTONpage 16

MONTEREYpage 22

WISCONSINpage 30

BALTIMOREpage 10

HAMILTONpage 17

CARMELpage 24

MICHIGANpage 34

BOSTONpage 11

RUSHMOREpage 18

IDAHOpage 25

WINCHESTERpage 36

SAGEpage 12

ILLINOISpage 19

INDIANApage 26

MODULAR WIRINGpage 37

PHILADELPHIApage 14

IOWApage 20

MONTANApage 27

OHIOpage 15

OMAHApage 21

BAHAMApage 28

RECESSED lighting7

HARVARDpage 42

WYOMINGpage 50

YALEpage 44

HOUSTONpage 52

PRINCETONpage 45

DALLASpage 53

BENTONpage 46

BERMUDApage 54

CODYpage 47

BARBADOSpage 55

CALIFORNIApage 48

PASADENApage 56

SURFACE & SUSPENDED lighting41

AMARILLOpage 57

WICHITApage 58

CONTENTS

NVC_CONTENTS.qxp:CONTENTS 22/4/13 13:25

www.nvcuk

.com

|+44(0)121

457

634

0NVC

CO

nt

En

tS

4

JACKSVILLEpage 60

ADDISONpage 70

CLARKSVILLEpage 82

CHEROKEEpage 61

SWIFTpage 72

DAYTONApage 62

TENNESSEEpage 74

MEMPHISpage 64

CHATTANOOGApage 76

PORTLANDpage 66

FRANKLINpage 78

GRESHAMpage 68

NASHVILLEpage 80

AMENITY lighting59

RUFUSpage 86

MARINpage 94

PACIFICpage 100

TRINITY v2page 87

TORONTOpage 95

SEATTLEpage 101

VENICEpage 88

QUEBECpage 96

NEVADApage 102

MESTREpage 89

GRACELANDpage 97

COLUSApage 90

SAN DIEGOpage 98

ASPENpage 92

SAN FRANCISCOpage 99

RETAIL & DISPLAY lighting85

BURLINGTONpage 106

WILMINGTONpage 107

KANSAS IP65page 108

LEXINGTONpage 110

NEBRASKApage 111

SYRACUSEpage 112

EMERGENCY lighting105

PHOENIX T5page 114

T5 ATTACHMENTSpage 120

PHOENIX T8page 115


PHOENIX WITHCONTROLLER

page 116

PHOENIXSENSORSpage 117

FAIRFAXpage 118

FAIRFAXCONNECTORS

page 119

BATTENS rangE113


5

NVC

CO

nt

En

tS

www.nvcuk

.com

|+44(0)121

457

634

0

HOLLOWAYpage 124

DARTMOORpage 130

WORMWOODpage 125

DEERBOLTpage 131

GLENOCHILpage 126

SHOTTSpage 127

FORDpage 128

BELMARSHpage 129

SECURE lighting123

ALASKA v2 T5page 135

PITTSBURGHpage 141

OREGON T5 SLIMpage 147

KELSOpage 154

ALASKA v2T5 MICRO-WAVE

page 136

NON-CORROSIVEACCESSORIES

page 142

OREGON PLLpage 148

TIOGApage 155

VALDEZpage 137

NON-CORROSIVESENSORSpage 143

OREGONSENSORSpage 149

GREENLANDpage 138

ATLANTApage 144

VENETApage 151

ALASKA T8page 139

OREGON LEDpage 145

REDMONDpage 152

ALASKA 110page 140

OREGON T5page 146

EUGENEpage 153

INDUSTRIAL lighting133

TETONpage 158

VANCOUVERpage 165

BAFFINpage 171

RYDERpage 178

TIVOLIpage 159

EDMONTONpage 166

ELLESMEREpage 172

TIVOLINIpage 160

NIAGARApage 167

BEAUFORTpage 173

TYROLpage 161

MONTREALpage 168

BRONXpage 174

HUDSONpage 162

LEYHILLpage 169

YUKONpage 176

WINNIPEGpage 164

LAWRENCEpage 170

ALBERTApage 177

EXTERIOR lighting157


www.nvcuk

.com

|+44(0)121

457

634

0NVC

CO

nt

En

tS

6

DENVERpage 180

NEW YORKpage 186

TAMPApage 181

MANITOBApage 187

ARIZONApage 182

MUNROEpage 188

APACHEpage 183

MINNESOTApage 189

AUSTINpage 184

MOLSONpage 190

COLORADOpage 185

MATLOCKpage 191

FLOODLIGHT lighting177

POST TOPACCESSORIES

page 194

COLUMNS &CUT-OUTSpage 196

LED LAMPSpage 197

PL LAMP HOLDERSpage 198

LOW VOLTAGETRANSFORMER

page 198

PHOTO-CELLSpage 198

ACCESSORIES193

TECHNICAL200 INDEX206

Class I. Basic insulation and all exposedconductive parts connected to an earth terminal.

Class II. Basic and supplementary insulationin accordance with BS En60598. noprovision for an earth connection.

Class III. Separated extra-low voltage. no voltageshigher than 50v aC or 120v DC are generated.

ENEC. the control gear in this fitting carries theEnEC (European norms Electrical Certification)mark. any control gear carrying this mark mustbe independently tested to meet both thesafety and the performance requirements ofthe applicable standards.

IP rating. all fittings are iP20 unless otherwisestated. a table of ingress Protection values isto be found on page 204.

Enhanced Capital Allowance. the UKgovernment allows the full value of lightingequipment to be deducted from taxable profitin the first year (rather than depreciated overseveral years), provided it meets certain energyefficiency and performance criteria. Where weshow this symbol it means that at least some ofthe variants in the product range in questionmeet the criteria for this advantageous taxtreatment. Please contact us for more details.

Light Emitting Diode. this fitting uses lEDsas its primary light source, or some variants ofthis fitting are available that use lEDs as theirprimary light source.

EXPLANATION OF SYMBOLSWarranty term. all our fittings are supplied witha 1 year warranty as standard. this symbol isused where applicable in relation to lED fittingsto indicate a longer warranty, in years. this issubject to our standard terms and conditionsbut the following points are to be noted:

- Fittings must be installed in accordancewith instructions and specifically not in anambient temperature that ever exceeds 25˚C

- Consumable items, such as fuses orbatteries, are excluded.

- lumen depreciation to 70% of initiallumens (l70) can occur and will notconstitute a valid warranty claim

- Warranties are stated in years, but arebased on 15 hours/day, 365 days/year.if actual running hours exceed this thewarranty (in years) is reduced accordingly.

- Our warranty is a “return-to-base, repair orreplace” warranty and specifically excludesconsequential losses and any on-site costs.

Anti-ligature. When installed correctly thisfitting is anti-ligature.

IK10. impact tested to withstand 20 Joules(5Kg dropped from 400mm), in accordancewith BS En62262.

IK10+. impact tested to withstand 40 Joules(10Kg dropped from 400mm)

IK10++. impact tested to withstand 80 Joules(20Kg dropped from 400mm)


SU

RFA

CE

&S

US

PE

ND

ED

LIG

HTI

NG

CO

NT

EN

TS

RECESS

ED

lig

ht

ing

co

nt

en

ts

OMAHApage 21

MONTEREYpage 22

CARMELpage 24

IDAHOpage 25

INDIANApage 26

MONTANApage 27

BAHAMApage 28

WISCONSINpage 30

MICHIGANpage 34

WINCHESTERpage 36

MODULARWIRINGpage 37

BISMARCKpage 8

BALTIMOREpage 10

BOSTONpage 11

SAGEpage 12

PHILADELPHIApage 14

OHIOpage 15

CLINTONpage 16

HAMILTONpage 17

RUSHMOREpage 18

ILLINOISpage 19

IOWApage 20

NVC_RECESSED.qxp:RECESSED 22/4/13 13:28

oRDeR coDe DescRiPtion

nBi3200/leD/850/tPA BisMARcK 3200 lUMen leD Rec MoD iP54 tPA

nBi3200/leD/M3/850/tPA BisMARcK 3200 lUMen leD Rec MoD iP54 +M3 tPA

nBi3200/leD/DA/850/tPA BisMARcK 3200 lUMen leD Rec MoD iP54 +DAli DiM tPA

nBi3200/leD/DAM3/850/tPA BisMARcK3200lUMenleDRecMoD iP54 +DAliDiM+M3tPA

597

597 105

CU

T-O

UT

=57

3

CUT-OUT = 574

www.nvcuk

.com

|+44(0)121

457

634

0RECESS

ED

lig

ht

ing

BISMARCK LED8

iP54 rated recessed modularleD fitting.

CONSTRUCTION- Robust steel body- White semi-gloss powder

coated finish- iP54 rated to the front of the fitting- supplied with opal tP(a)

rated front panel

APPLICATIONS- health centres and hospitals- Food preparation areas- laboratories and clean rooms

SPECIFICATION- lg leDs- ist iDrive driver- cRi >.8. 5,000K- 3100lm. 42W. 73 l.lm/c.W- For 15-24mm exposed t,

plasterboard and someconcealed grid ceilings

OPTIONS- Emergency. Maintained 3 hours

available. suffix M3- Dimming. DAli dimming

available. suffix DA

supplied complete withside-arm support brackets

lg leDsfitted


BISMARCKiP54 rated recessed modular fitting

for t5 and t8 lamps.


coated finish- iP54 rated to the front of the fitting


available on all versions.Add suffix M3.

- Dimming. Add suffix 1-10, Dsi,DA, sD or cF as required.

APPLICATIONS- health centres and hospitals- Food preparation areas- laboratories and clean rooms

SPECIFICATION- For t5 and t8 lamps. supplied

excluding lamps- leading brand enec control gear- For 15-24mm exposed t, plasterboard

and some concealed grid ceilings

9

RECESS

ED

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0

t5


nBi314/t5/tPB BisMARcK 3X14W t5 Rec MoD iP54 tPB PAnel








597

14W/18W/24W = 59728W/36W/54W = 1197

105

CU

T-O

UT

=57

3

CUT-OUT: 14W/18W/24W = 574CUT-OUT: 28W/36W/54W = 1175

t8


nBi418/hF/tPB BisMARcK 4X18W t8 hF Rec MoD iP54 tPB PAnel

nBi436/hF/tPB BisMARcK 4X36W t8 hF Rec MoD iP54 tPB PAnel

supplied complete withside-arm support brackets

- Sensors. Available withmicro-wave sensor fittedbehind front panel.Add suffix MW.

- Prismatic panels. M3 versionsall supplied with tP(a) panels.standard versions suppliedwith tP(b) panels. tP(a)panels available.Add suffix tPA.


www.nvcuk

.com

|+44(0)121

457

634

0RECESS

ED

lig

ht

ing

BALTIMORE10

semi recessed modular fitting withperforated basket for t5 and Pll lamps.


nBl224/t5 BAltiMoRe 2X24W t5 seMi RecesseD DRoP BAsKet

nBl224/t5/M3 BAltiMoRe 2X24W t5 seMi RecesseD DRoP BAsKet M3

nBl240/Pll BAltiMoRe 2X40W Pll seMi RecesseD DRoP BAsKet

nBl240/Pll/M3 BAltiMoRe 2X40W Pll seMi RecesseD DRoP BAsKet M3

nBl255/Pll BAltiMoRe 2X55W Pll seMi RecesseD DRoP BAsKet

nBl255/Pll/M3 BAltiMoRe 2X55W Pll seMi RecesseD DRoP BAsKet M3

AttAchMents


nBl/DiFF BAltiMoRe DiFFUseR sheet

SPECIFICATION- For t5 and Pll lamps.

supplied excluding lamps.- leading brand enec control gear- For 15-24mm exposed t ceilings

CONSTRUCTION- Robust steel body- RAl9016 semi-gloss powder

coated finish- Perforated steel basket diffuser

APPLICATIONS- offices- conference rooms- Reception areas


available on all versions. suffix M3.- Dimming. Add suffix 1-10, Dsi, DA,

sD or cF as required.- Diffuser sheet. Plastic diffuser

sheet for insertion insideperforated steel basket available.order as separate item if required.


BOSTONsemi recessed modular fitting with

dropped louvre for t5 and Pll lamps.

CONSTRUCTION- Robust steel body- RAl9016 semi-gloss powder

coated finish- Double parabolic louvre made of

specular anodised aluminiumbetween perforated steel sections



supplied excluding lamps.- leading brand enec control gear- For 15-24mm exposed t ceilings


nBo224/t5 Boston 2X24W t5 seMi RecesseD DRoP loUVRe

nBo224/t5/M3 Boston 2X24W t5 seMi RecesseD DRoP loUVRe M3

nBo240/Pll Boston 2X40W Pll seMi RecesseD DRoP loUVRe

nBo240/Pll/M3 Boston 2X40W Pll seMi RecesseD DRoP loUVRe M3

nBo255/Pll Boston 2X55W Pll seMi RecesseD DRoP loUVRe

nBo255/Pll/M3 Boston 2X55W Pll seMi RecesseD DRoP loUVRe M3

11

RECESS

ED

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0


available on all versions.suffix M3.


- Sensors. Available with sensorfitted to lamp. Add suffix PiRDor Mll as required.


www.nvcuk

.com

|+44(0)121

457

634

0RECESS

ED

lig

ht

ing

SAGE LED12

Recessed leD direct/indirectfitting with louvre.


coated finish- Miro 4 (specular) louvre- opal polycarbonate diffuser panels

OPTIONS- Emergency. integral M3 operation

is not available. instead, considerour sYRAcUse self containedemergency leD module (p112).this is a cost-effective, versatileand energy efficient approachto emergency lighting.

- Dimming. DAli dimmingavailable. suffix DA.

- Pull-up installation.For installation in a plasterboardceiling use suffix PU.

APPLICATIONS- offices, meeting rooms

and general commercial use- classrooms

SPECIFICATION- samsung leDs- Philips Xitanium driver- cRi >.8. 4,000K- 4,500lm. 68W. 66 l.lm/c.W- For 15-24mm exposed t

and plasterboard ceilings


nsA4500/leD/840 sAge 4500lM leD Rec MoD loUVRe + DiFFUseR 840

nsA4500/leD/DA/840 sAge 4500lM leD DAli Rec MoD loUVRe + DiFFUseR 840

nsA4500/leD/PU/840 sAge 4500lM leD Rec MoD PUll-UP loUVRe + DiFFUseR 840

nsA4500/leD/DA/PU/840 sAge 4500lM leD DAli Rec MoD PUll-UP loUVRe + DiFFUseR 840



nsA314/t5 sAge 3X14W t5 Rec MoD loUVRe + DiFFUseR

nsA314/t5/M3 sAge 3X14W t5 Rec MoD M3 loUVRe + DiFFUseR







SAGE T5Recessed direct/indirect fitting with

louvre for t5 lamps.


coated finish- Miro 5 (semi-specular) louvre- opal polycarbonate diffuser panels

APPLICATIONS- offices, meeting rooms and

general commercial use- classrooms

SPECIFICATION- For t5 lamps. supplied

excluding lamps- leading brand enec control gear- For 15-24mm exposed t

and plasterboard ceilings

13

RECESS

ED

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0





- Pull-up installation.For installation in a plasterboardceiling add suffix PU.


www.nvcuk

.com

|+44(0)121

457

634

0RECESS

ED

lig

ht

ing

PHILADELPHIA14

semi recessed modular fitting with louvre fort5 & Pll lamps.


nPi424/t5 PhilADelPhiA 4X24W t5 seMi RecesseD

nPi424/t5/M3 PhilADelPhiA 4X24W t5 seMi RecesseD M3

nPi240/Pll PhilADelPhiA 2X40W Pll seMi RecesseD

nPi240/Pll/M3 PhilADelPhiA 2X40W Pll seMi RecesseD M3

nPi255/Pll PhilADelPhiA 2X55W Pll seMi RecesseD

nPi255/Pll/M3 PhilADelPhiA 2X55W Pll seMi RecesseD M3



specular anodised aluminiumbetween perforated steel sections



supplied excluding lamps.- leading brand enec

control gear- For 15-24mm exposed t ceilings

and some pull-up installations


available on all versions. suffix M3.- Dimming. Add suffix 1-10, Dsi,

DA, sD or cF as required.- Sensors. Available with sensor

fitted to lamp. Add suffix PiRDor Mll as required.

- Pull-up installation.For plasterboard and other pull-upinstallations packs of 4 lumafixbrackets are available asseparate items.

AttAchMents


nBRK/lUMAFiX/PK4 lUMAFiX BRAcKets – PAcK oF 4


OHIORecessed modular fitting for

t5 & Pll lamps, direct/indirect, with louvre.


coated finish- louvre and diffuser panels in a

single piece frame, secured onwishbone springs for easymaintenance

APPLICATIONS- offices and general commercial use


supplied excluding lamps- leading brand enec control gear- For 15-24mm exposed t ceilings- specular double parabolic louvre

with rear reflector- opal acrylic diffuser panels- side veins to contribute to

lg7 compliance


noh414/t5 ohio 4X14W t5 Rec MoD loUVRe + DiFFUseR

noh414/t5/M3 ohio 4X14W t5 Rec MoD M3 loUVRe + DiFFUseR





noh140/Pll ohio 1X40W Pll Rec MoD loUVRe + DiFFUseR

noh140/Pll/M3 ohio 1X40W Pll Rec MoD M3 loUVRe + DiFFUseR

noh155/Pll ohio 1X55W Pll Rec MoD loUVRe + DiFFUseR

noh155/Pll/M3 ohio 1X55W Pll Rec MoD M3 loUVRe + DiFFUseR

15

RECESS

ED

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0






www.nvcuk

.com

|+44(0)121

457

634

0RECESS

ED

lig

ht

ing

CLINTON16

Recessed modular fitting for t5 lamps,direct/indirect with louvre.


nct124/t5 clinton 1X24W t5 Rec MoD + loUVRe





nct124/t5/PU clinton 1X24W t5 Rec MoD PUll UP + loUVRe





SINGLE & TWIN LAMP FOUR LAMP


coated finish- Miro 5 (semi-specular)

double parabolic louvre

APPLICATIONS- offices, conference rooms and


SPECIFICATION- For t5 lamps.

supplied excluding lamps- leading brand enec

control gear- For 15-24mm exposed

t ceilings and somepull-up installations


available on all versions.Add suffix M3

- Dimming. Add suffix 1-10, Dsi, DA,sD or cF as required


- Pull-up installation.For installation in a plasterboardceiling use suffix PU


HAMILTONsemi-recessed modular fitting for t5 lamps,

direct/indirect with louvre

CONSTRUCTION- Robust steel body with white

semi-gloss powder coated finish- Drop-basket attachment with

Miro 5 (semi-specular) doubleparabolic louvre, perforated steelside panels and polycarbonateend-caps




supplied excluding lamps- leading brand enec control gear- For 15-24mm exposed t ceilings



nhM314/t5 hAMilton 3X14W t5 Rec MoD + loUVRe

nhM324/t5 hAMilton 3X24W t5 Rec MoD + loUVRe

nhM314/t5/PU hAMilton 3X14W t5 Rec MoD PUll UP + loUVRe

nhM324/t5/PU hAMilton 3X24W t5 Rec MoD PUll UP + loUVRe

595

163 50

595

573

573

17

RECESS

ED

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0


available on all versions.Add suffix M3

- Dimming. Add suffix 1-10, Dsi,DA, sD or cF as required

- Pull-up installation.For installation in a plasterboardceiling use suffix PU


www.nvcuk

.com

|+44(0)121

457

634

0RECESS

ED

lig

ht

ing

RUSHMORE18

Recessed modular fitting for t5 lamps,direct/indirect with micro-prismatic diffuser.


nRs214/t5 RUshMoRe 2X14W t5 Rec MoD + MicRo PRis DiFF




nRs140/Pll RUshMoRe 1X40W Pll Rec MoD + MicRo PRis DiFF





semi-gloss powder coated finish- one (2-lamp) or two (4-lamp)

micro-prismatic diffusers,easily removable for cleaningand lamp changes.





control gear- For 15-24mm exposed

t ceilings and somepull-up installations



- Dimming. Add suffix 1-10, Dsi, DA,sD or cF as required.

- Pull-up installation.For installation in a plasterboardceiling add suffix PU.

TWIN LAMP FOUR LAMP


ILLINOISRecessed modular fitting for t5 & Pll lamps,

direct/indirect with perforated diffuser.


supplied excluding lamps- leading brand enec control gear- For 15-24mm exposed t ceilings

and some pull-up installations.


coated finish- Perforated steel diffuser

APPLICATIONS- offices and conference rooms- Reception areas

19

RECESS

ED

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0




- Pull-up installation.For installation in 15-24mmexposed t ceilings.For plasterboard and otherpull-up installations packs of4 lumafix brackets are availableas separate items.

lumafix Brackets – pack of 4


nil224/t5 illinois 2X24Wt5 Rec MoD

nil240/Pll illinois 2X40WPll Rec MoD

nil255/Pll illinois 2X55WPll Rec MoD

sPARes & AttAchMents


nBRKt/lUMAFiX/PK4 lUMAFiX BRAcKets – PAcK oF 4

nil/Ds/24 illinois DiFFUseR sheet

nil/RR/24 illinois/ioWA ReAR ReFlectoR

595

595

95


www.nvcuk

.com

|+44(0)121

457

634

0RECESS

ED

lig

ht

ing

IOWA20


coated finish- semi-specular double

parabolic louvre- louvre retained on shoot bolts

for easy lamp changing


available. Add suffix M3.- Dimming. Add suffix 1-10, Dsi,

DA, sD or cF as required.- Pull-up installation. For installation

in 15-24mm exposed t ceilings.For plasterboard and other pull-upinstallations packs of 4 lumafixbrackets are available asseparate items.

Recessed modular for t5 &Pll lamps, direct/indirectwith louvre.






595

595

95

single-lamp version


niA314/t5 ioWA 3X14Wt5 Rec MoD





niA140/Pll ioWA 1X40WPll Rec MoD




sPARes & AttAchMents


nBRKt/lUMAFiX/PK4 lUMAFiX BRAcKets – PAcK oF 4

lumafix Brackets –pack of 4

twin-lamp version

V2 with specular louvre and15% greater efficiency.

COMING SOON…


OMAHARecessed modular leD fitting,direct/indirect with controler.


gloss powder coated finish- For 15-24mm exposed t ceilings- clear polycarbonate side diffuser

panels with textured finish- PMMA central controller- easy-access terminal block on rear


SPECIFICATION- 3,300 lumens, 44W, 75 l.lm/c.W- 5,000K- cree/lg leD’s.

21

RECESS

ED

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0

OPTIONS- Emergency. integral M3

operation is not available.instead, consider using oursYRAcUse self containedemergency leD module(p112). this is a cost effective,versatile and energy efficientapproach to emergencylighting.

- Dimming. For DAli dimming,use suffix DA.

For emergency lightingwith oMAhA

use the sYRAcUseself-contained leD fitting


noM3400/leD/850 oMAhA 3400 lUMen leD Rec MoD

noM3400/leD/DA/850 oMAhA 3400 lUMen Rec MoD + DAli


595

595

55

580

6

260

85

www.nvcuk

.com

|+44(0)121

457

634

0RECESS

ED

lig

ht

ing

MONTEREY22

Recessed leD panel with class-leading performance.


gloss powder coated finish- For 15-24mm exposed t ceilings- Flush-fitting smooth front panel -

wipe-clean surface ideal formedical applications.

- Front panel tP(a) rated.


available. suffix M3.- Dimming. Add suffix 1-10 or

DA as required.

APPLICATIONS- classrooms, offices and

meeting rooms- hospitals and medical centres

SPECIFICATION- iDrive ist driver- cRi>. 8. 5,000K- 3,500 lm. 42W. 83 l.lm/c.W- For 15-24mm exposed t ceilings


nMY42/leD/850 MonteReY leD 42W PAnel 600X600

nMY42/leD/M3/850 MonteReY leD 42W PAnel 600X600 +M3


23

RECESS

ED

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0

the data below illustrate the performance of the MonteReY panel in relation to popular fluorescent fittings.All the data is from industry sources such as helvar, tridonic and sylvania, and is calculated using Relux lightingdesign software.

All the examples are based on an office measuring 5m x 12m x 2.8m ceiling height with 15 fittings installed.

When compared with a traditional louvered fitting, such as a 4 x 18W t8 or 3 x 14W t5 (pictured above),the MonteReY panel distributes much more light onto the walls.

the images below were generated in Relux and show the light distribution on the walls from 4 x 18W louveredfittings (left) and the distribution from MonteReY panels, in the same positions (right). the scalloping effectcreated by the louvered fittings is clearly visible.

Light distribution from 4 x 18W louvered fitting withpronounced scalloping.

COMPARISON ChART

Light distribution from the MONTEREY LED panelwith even wall illumination.

Av illum at desk 693 lux 547 lux 542 lux 593 lux

total power 1052 watts 690 watts 1305 watts 630 watts

l2 compliant NO YES NO YESeligible for ecA NO NO NO YES

luminaire ims/circuit W 51 58 37 83

15xT8 4x18W

compliantKey:

15xT5 3x14W

15x Direct/IndirectPLL 2x40W

15x NVC LED Panel42W

not compliant



ncM3500/leD/850 cARMel 3500 lUMen leD col850

ncM3500/leD/M3/850 cARMel 3500 lUMen leD +M3 col850

ccM3500/leD/PiR/850 cARMel 3500 lUMen leD PiR col850

ccM3500/leD/PiR/M3/850 cARMel 3500 lUMen leD PiR +M3 col850

ccM3500/leD/PiRD/850 cARMel 3500 lUMen leD PiR + DAli col850

ccM3500/leD/PiRD/M3/850 cARMel 3500 lUMen leD PiR +DAli+M3 col850

www.nvcuk

.com

|+44(0)121

457

634

0RECESS

ED

lig

ht

ing

24

carmel is availablewith PiR sensor fitted

CARMELRecessed leD panel.


coated finish- opal polystyrene diffuser panels


available. suffix M3- Dimming. Add suffix 1-10 or DA

as required.- Sensors. Available with PiR sensors

fitted. suffix PiR (on/off) or PiRD(dimming) as required.

APPLICATIONS- classrooms, offices and

meeting rooms- hospitals and medical centres

SPECIFICATION- lg leDs- tridonic driver.- cRi >.8. 5,000K- 3500lm. 42W. 83 l.lm/c.W- For 15-24mm exposed t ceilings


IDAHORecessed modular fitting for t5 lamps

with louvre and side veins.

CONSTRUCTION- Robust steel body- White gloss powder coated finish- UV stable moulded side veins- specular double parabolic louvre- louvre retained on shoot bolts

for easy lamp changing



excluding lamps- leading brand enec

control gear- For 15-24mm exposed t ceilings- side veins to contribute to

lg7 compliance

25

RECESS

ED

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0


available, suffix M3.- Dimming. Add suffix 1-10, Dsi,

DA,sD or cF as required.- Sensors. Available with sensor



niD414/t5 iDAho 4X14Wt5 Rec MoD (lg7)

niD414/t5/M3 iDAho 4X14Wt5 Rec MoD (lg7) M3

595

595

106 72


www.nvcuk

.com

|+44(0)121

457

634

0RECESS

ED

lig

ht

ing

INDIANA26

Recessed modular fittings for t5 lampswith louvre or prismatic controller.



DA, sD or cF as required.- Sensors. louvered versions

available with PiR sensor fitted.Add suffix PiR (on/off)or PiRD (dimming) as required.

- Prismatic panels. Available asseparate items as listed, or fitted,add suffix tPA or tPB. note – tP(b)not available with M3.

- Rear reflectors. louvered versionsavailable with rear reflector forgreater output. Add suffix RR.

APPLICATIONS- offices and meeting rooms- Reception areas and retail



control gear- For 15-24mm exposed t ceilings- specular double parabolic

louvre or prismatic controller

CONSTRUCTION- Robust steel body- White gloss powder coated finish

14W

=59

528

W=

1195

595

61 6114

W=

595

28W

=11

95

595

3 LAMP 4 LAMP


nin314/t5 inDiAnA 3X14Wt5 Rec MoD+loUVRe






AttAchMents


nin/cntR/414/tPA inDiAnA PRisMAtic cntR 3/4X14 tP(A) PAnel & FRAMe

nin/cntR/428/tPA inDiAnA PRisMAtic cntR 3/4X28W tP(A) PAnel & FRAMe

nin/cntR/414/tPB inDiAnA PRisMAtic cntR 3/4X14 tP(B) PAnel & FRAMe

nin/cntR/428/tPB inDiAnA PRisMAtic cntR 3/4X28 tP(B) PAnel & FRAMe

Prismatic panel indiana is availablewith PiR sensor fitted


MONTANARecessed modular fittings for t8 lamps with a choice of 2 louvres

or tP(a)/tP(b) rated prismatic controller.



DA, sD or cF as required.- Sensors. Available with sensor


APPLICATIONS- offices- general commercial use




CONSTRUCTION- Robust steel body- White gloss powder coated finish

27

RECESS

ED

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0

Prismatic panel AlB louvre


nMt418/hF MontAnA 4X18W hF Rec MoD + loUVRe

nMt436/hF MontAnA 4X36W hF Rec MoD + loUVRe

nMt418/hF/AlB MontAnA 4X18W hF Rec MoD +loW BRightness loUVRe

nMt436/hF/AlB MontAnA 4X36W hF Rec MoD +loW BRightness loUVRe

nMt/418/hF/tPA MontAnA 4X18W hF Rec MoD + tP(A) FRAMe & PAnel

nMt/436/hF/tPA MontAnA 4X36W hF Rec MoD + tP(A) FRAMe & PAnel

nMt/cntR/418/tPB MontAnA PRisMAtic cntR 4X18 tP(B) FRAMe & PAnel

nMt/cntR/436/tPB MontAnA PRisMAtic cntR 4X36 tP(B) FRAMe & PAnel

AttAchMents


nMt/cntR/418/tPA MontAnA PRisMAtic contRolleR 4X18W tP(A) FRAMe & PAnel

nMt/cntR/436/tPA MontAnA PRisMAtic contRolleR 4X36W tP(A) FRAMe & PAnel

595

18W

=59

536

W=

1195

86

- Optics. Available with a choiceof 3 optics:1. Louvre. Available as standard

with specular doubleparabolic louvre.

2. ALB louvre. Aluminiumlow-brightness louvres available.suffix AlB.

3. Prismatic panels. tP(a) & tP(b)panels available, use suffix tPAor tPB as listed. note – tP(b)not available with M3.



nBh128/t5 BAhAMA 1X28W t5 ReccesseD + loUVRe










www.nvcuk

.com

|+44(0)121

457

634

0RECESS

ED

lig

ht

ing

BAHAMA28

CONSTRUCTION- steel body with white semi-gloss

powder coated finish to RAl9003- Miro 5 semi-specular louvre,

opal polycarbonate diffuser ormicro-prismatic diffuser.

OPTIONS- Emergency. integral M3 operation is

not available. instead, consider oursYRAcUse self containedemergency leD module (p112).this is a cost-effective, versatile andenergy efficient approach toemergency lighting.


- Diffuser. Available with opal diffuser,add suffix o, or Micro-prismaticdiffuser add suffix P.

Recessed linear fittings with louvreor diffuser for t5 lamps

APPLICATIONS- corridors and public areas- schools and offices



control gear- For installation in plasterboard

ceilings. supplied complete withmounting brackets.

- symmetric light distribution

For emergency lightingwith BAhAMA

use the sYRAcUseself-contained leD fitting


We offer 3 separate ranges of commercial downlights, all described in full onthe following pages:

WISCONSIN

- Available in leDwith 5yr warranty- 1,250 lm- 2,000 lm- 2,500 lm

- Available in cFl versions,single and twin lamp- 18W- 26W- 32W- 42W

- emergency and dimmingoptions available for all variants

- comprehensive rangeof attachments available,up to iP65

- suitable for use with sensors

MIChIGAN

- Available in cFl versions only,single and twin lamp- 18W- 26W

- emergency and dimmingoptions available for all variants

- comprehensive rangeof attachments available,up to iP44

- not recommended for usewith sensors

WINChESTER

- Available in leD versions onlywith 3 yr warranty- 1,500 lm- 2,000 lm- 2,300 lm

- no integral emergency ordimming variants available

- one drop-glass attachmentonly available

- suitable for use with sensors

29

RECESS

ED

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0


www.nvcuk

.com

|+44(0)121

457

634

0RECESS

ED

lig

ht

ing

WISCONSIN LED30

Recessed leD downlights with class-leading performance.

CONSTRUCTION- Die cast aluminium heat sink housing

a polished aluminium reflector- twist-and-lock front bezel.

supplied with white bezel fittedcomplete with tP(a) ratedpolycarbonate nano diffuser.


available on all variants.Add suffix M3.

- Dimming. Add suffix 1-10 orDA as required.

- Attachments. All fittings aresupplied with a white twist-and-lock bezel fitted. Additionalbezels with a range of finishesand iP ratings are available asadditional items. see page 32for details.

APPLICATIONS- Retail- corridors and circulation areas

SPECIFICATION- Bridgelux col 840 coB

leD package- ist iDrive driver- choice of 3 lumen packages:

1,250, 2,000 & 2,500 lumens- Up to 70 luminaire lumens

per circuit watt


nWs1250/leD/840 Wisconsin 1250 lUMen leD DoWnlighteR col840



LED STANDARD

LED EMERGENCY


WISCONSIN CFLRecessed compact fluorescent downlights.

CONSTRUCTION- Polished aluminium reflector- steel gear enclosure- twist-and-lock front bezel.

supplied with white bezel fitted

APPLICATIONS- Retail- corridors and circulation areas

SPECIFICATION- For single and twin 18, 26,

32 and 42W Pl lamps- leading brand enec

control gear- leading brand col 840

lamps included

31

RECESS

ED

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0




- Attachments. All fittings aresupplied with a whitetwist-and-lock bezel fitted.Additional bezels with a rangeof finishes and iP ratings areavailable as additional items.see page 32 for details.


nWs118/hF/840 Wisconsin 1X18WPl hF DoWnlight +840 lAMP








CFL STANDARD

CFL EMERGENCY


www.nvcuk

.com

|+44(0)121

457

634

0RECESS

ED

lig

ht

ing

WISCONSIN ATTACHMENTS32

All Wisconsin fittings are supplied with a white die cast aluminium bezel.A full range of alternative attachments is available to be ordered as separate items.this page shows attachments designed specifically for either Wisconsin leD orWisconsin cFl.

IP65 RATED ATTAChMENTS for WISCONSIN LEDAll Wisconsin leD fittings are supplied with a whitedie cast aluminium bezel and a polycarbonate, tP(a)rated nano diffuser panel. these are iP20 rated.

to achieve an iP65 rating a range of tP(a) rated nanodiffuser panels is available as listed below. each kitcomprises the nano diffuser panel itself and a specialbezel with the necessary gasket in a choice of 3 finishes(white = Wh, chrome = ch or satin chrome = sch).


nWs/leD/DiFF/iP65/Wh Wisconsin leD iP65 DiFFUseR PAnel Wh BeZel +nAno DiFF

nWs/leD/DiFF/iP65/ch Wisconsin leD iP65 DiFFUseR PAnel ch BeZel +nAno DiFF

nWs/leD/DiFF/iP65/sch Wisconsin leD iP65 DiFFUseR PAnel sch BeZel +nAno DiFF

DIFFUSER PANEL & IP65 RATED ATTAChMENTSfor WISCONSIN CFLAll Wisconsin cFl fittings are supplied with awhite die cast aluminium bezel and an open front.these are iP20 rated.

A plain opal tP(a) diffuser panel is available.When fitted the iP rating is unchanged at iP20.


nWs/cFl/DiFF/o/tPA Wisconsin cFl DiFFUseR PAnel oPAl Pc tP(A) RAteD

to achieve an iP65 rating a complete range of clear oropal tP(a) rated diffuser panels is available as listedbelow. each kit comprises the diffuser panel itself in achoice of 2 finished (clear = cl, or opal = o) and a specialbezel with the necessary gasket in a choice of 3 finishes(white = Wh, chrome = ch or satin chrome = sch).


nWs/cFl/DiFF/iP65/Wh/cl Wisconsin cFl iP65 DiFFUseR PAnel Wh BeZel +cleAR Pc DiFF tP(A)

nWs/cFl/DiFF/iP65/ch/cl Wisconsin cFl iP65 DiFFUseR PAnel ch BeZel +cleAR Pc DiFF tP(A)

nWs/cFl/DiFF/iP65/sch/cl Wisconsin cFl iP65 DiFFUseR PAnel sch BeZel +cleAR Pc DiFF tP(A)

nWs/cFl/DiFF/iP65/Wh/o Wisconsin cFl iP65 DiFFUseR PAnel Wh BeZel +oPAl Pc DiFF tP(A)

nWs/cFl/DiFF/iP65/ch/o Wisconsin cFl iP65 DiFFUseR PAnel ch BeZel +oPAl Pc DiFF tP(A)

nWs/cFl/DiFF/iP65/sch/o Wisconsin cFl iP65 DiFFUseR PAnel sch BeZel +oPAl Pc DiFF tP(A)

Wisconsin leD with bespoke sign Wisconsin cFl with a clear iP65 panelnWs/cFl/DiFF/iP65/Wh/cl


WISCONSIN ATTACHMENTSAll Wisconsin fittings are supplied with a white die cast aluminium bezel.

A full range of alternative attachments is available to be ordered as separate items.this page shows attachments designed specifically for use on the Wisconsin leD

and Wisconsin cFl.

33

RECESS

ED

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0

Wisconsin leD with exit sign

BEZELSevery Wisconsin fitting is supplied with a whitebezel. Alternative twist-and-lock bezels are availablein chrome and satin chrome.

SIGNAGEA range of standard exit signage is available as below.

We also offer a bespoke signage service.Please enquire for details.

DROP-GLASS KITSDrop-glass kits are comprised of a toughened glass,a bezel and a kit of 3 pillars and fixing screws.

- the glass is available in 4 styles, inner frosted (iF),outer frosted (oF), all frosted (AF) and clear (cl).

- Bezels are available in 3 finishes, white(Wh), chrome (ch) or satin chrome (sch).

these are all available to be ordered as complete kits,as listed below:


nWs/Be/ch Wisconsin chRoMe BeZel

nWs/Be/sch Wisconsin sAtin chRoMe BeZel


nWs/le/UP Wisconsin legenD UP +M3 scReWs

nWs/le/DoWn Wisconsin legenD DoWn +M3 scReWs

nWs/le/leFt-Right Wisconsin legenD leFt/Right +M3 scReWs

PATTRESSA pattress is available to assist in the quick and easyinstallation of Wisconsin. it consists of a piece of4mm mdf, 595 x 595 with the correct cut-out centrallypositioned. these are sold in packs of 10.


nWs/DgK/Wh/iF Wisconsin DRoP glAss Kit Wh BeZel +inneR FRosteD glAss

nWs/DgK/Wh/oF Wisconsin DRoP glAss Kit Wh BeZel +oUteR FRosteD glAss

nWs/DgK/Wh/AF Wisconsin DRoP glAss Kit Wh BeZel +All FRosteD glAss

nWs/DgK/Wh/cl Wisconsin DRoP glAss Kit Wh BeZel +cleAR glAss

nWs/DgK/ch/iF Wisconsin DRoP glAss Kit ch BeZel +inneR FRosteD glAss

nWs/DgK/ch/oF Wisconsin DRoP glAss Kit ch BeZel +oUteR FRosteD glAss

nWs/DgK/ch/AF Wisconsin DRoP glAss Kit ch BeZel +All FRosteD glAss

nWs/DgK/ch/cl Wisconsin DRoP glAss Kit ch BeZel +cleAR glAss

nWs/DgK/sch/iF Wisconsin DRoP glAss Kit sch BeZel +inneR FRosteD glAss

nWs/DgK/sch/oF Wisconsin DRoP glAss Kit sch BeZel +oUteR FRosteD glAss

nWs/DgK/sch/AF Wisconsin DRoP glAss Kit sch BeZel +All FRosteD glAss

nWs/DgK/sch/cl Wisconsin DRoP glAss Kit sch BeZel +cleAR glAssoRDeR coDe DescRiPtion

nWs/PAttRess/PK10 Wisconsin PAttRess PAcK oF 10

Wisconsin leD with drop-glass kit nWs/DgK/ch/iF


www.nvcuk

.com

|+44(0)121

457

634

0RECESS

ED

lig

ht

ing

MICHIGAN34

Recessed compact fluorescent down lights.

SPECIFICATION- 18W and 26W Pl lamps- supplied with leading

brand colour 840 lamps- high-frequency control gear,

not suitable for frequent switching- gear box can be mounted to

the side of the fitting if required

CONSTRUCTION- Aluminium polished

facetted reflector- steel gear box- White bezel fitted


available. suffix M3.- Dimming. Add suffix 1-10, Dsi,

DA, sD or cF as required.- Attachments. All to be ordered

as separate items aslisted opposite.

APPLICATIONS- Retail- corridors and circulation areas- toilets


nMi118/hF/840 MichigAn 1X18WPl hF DoWnlight +840 lAMP

nMi118/hF/M3/840 MichigAn 1X18WPl hF DoWnlight M3 +840 lAMP







Ø224

183

Ø200 CUT-OUT

Ø224

Ø200 CUT-OUT

190

43

43

190

5

140

5

Ø224

Ø200 CUT-OUT

140

5

46

343

WITH GEAR BOX FIXED ON TOP WITH GEAR BOX REMOTE

M3 WITH GEAR BOX REMOTE


BeZels


nMi/Be/ch MichigAn chRoMe BeZel

nMi/Be/sch MichigAn sAtin chRoMe BeZel

DRoP-glAss Kits


nMi/DgK/Wh/iF MichigAn D.glAss Wh BeZel inneR FRosteD

nMi/DgK/Wh/oF MichigAn D.glAss Wh BeZel oUteR FRosteD

nMi/DgK/Wh/AF MichigAn D.glAss Wh BeZel All FRosteD

nMi/DgK/Wh/cl MichigAn D.glAss Wh BeZel cleAR

nMi/DgK/ch/iF MichigAn D.glAss ch BeZel inneR FRosteD

nMi/DgK/ch/oF MichigAn D.glAss ch BeZel oUteR FRosteD

nMi/DgK/ch/AF MichigAn D.glAss ch BeZel All FRosteD

nMi/DgK/ch/cl MichigAn D.glAss ch BeZel cleAR

nMi/DgK/sch/iF MichigAn D.glAss s.ch BeZel inneR FRosteD

nMi/DgK/sch/oF MichigAn D.glAss s.ch BeZel oUteR FRosteD

nMi/DgK/sch/AF MichigAn D.glAss s.ch BeZel All FRosteD

nMi/DgK/sch/cl MichigAn D.glAss s.ch BeZel cleAR

DecoRAtiVe glAss Kits


nMi/DecK/Wh/AF MichigAn Dec Kit Wh BeZel All FRosteD

nMi/DecK/ch/AF MichigAn Dec Kit ch BeZel All FRosteD

nMi/DecK/sch/AF MichigAn Dec Kit s.ch BeZel All FRosteD

sPARes etc


nMi/cliP/sUsP/PK2 MichigAn sUsPension cliP PAcK oF 2

nMi/PAttRess/PK10 MichigAn PAttRess PAcK 10

iP44 Kit


nMi/iP44K/Wh/AF MichigAn iP44 Kit Wh BeZel All FRosteD

nMi/iP44K/Wh/iF MichigAn iP44 Kit Wh BeZel inneR FRosteD

nMi/iP44K/Wh/oF MichigAn iP44 Kit Wh BeZel oUteR FRosteD

nMi/iP44K/Wh/cl MichigAn iP44 Kit Wh BeZel cleAR

AlteRnAtiVe BeZelsAlternative bezels are available in chrome andsatin chrome.

DRoP-glAss KitsDrop glass kits consist of a drop-glass bezel white,chrome or satin chrome), the glass itself (innerfrosted, outer frosted, all frosted or clear), pillars andfixing screws.

iP44 KitKits to give the MichigAn an iP44 rating are available.each kit is comprised of a gasket, an iP44 bezel (whiteonly), the toughened glass itself (frosted all-over, innerfrosted, outer frosted or clear) and fixing screws.

DecoRAtiVe glAss KitsDecorative glass kits are available comprised of abezel (white, chrome or satin chrome), thetoughened glass itself (1 pattern, frosted all-over)and a set of 3 decorative arms.

PAttRessA pattress is available to assist the quick installationof MichigAn. it consists of a piece of 4mm mdf,595 x 595 with the correct cut-out centrallypositioned. sold in packs of 10.

nMi/DgK/Wh/iFDrop glass kit, white bezel, inner frosted

nMi/iP44/Wh/AFiP44 kit, white bezel, all frosted

Michigan decorative glass white bezel, all frosted

MICHIGAN ATTACHMENTSMichigAn downlights are sold complete with a

white steel bezel. the following attachmentsare available as separate items.

35

RECESS

ED

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0



nWt1100/leD/840 WinchesteR 1100lM leD DoWnlight +DiFF



nWt1100/leD/Dg/840 WinchesteR 1100lM leD DoWnlight +DiFF +DRoP-glAss



WINCHESTER

WINCHESTER WITH DROP GLASS

www.nvcuk

.com

|+44(0)121

457

634

0RECESS

ED

lig

ht

ing

36

WINCHESTERcost effective leD downlightfor multiple uses.

CONSTRUCTION- Die-cast aluminium heat-sink- opal acrylic diffuser- integral moulded driver enclosure

OPTIONS- Emergency. integral M3 operation

is not available. instead, considerour sYRAcUse leD module onp112. this is a cost effective,versatile and energy efficientapproach to emergency lighting.

- Dimming. there are no dimmingoptions available.

- Drop-glass. Available withdrop-glass attachment fitted.Use suffix Dg.

APPLICATIONS- corridors and circulation areas- toilets

SPECIFICATION- cRi >.8- 4,000K- three lumen levels, 1,100lm,

1,500lm, 2,300lm,- Up to 84 l.lm/c.W

Winchester standard

Winchester drop-glassFor emergency lighting with

WinchesteR use the sYRAcUseself-contained leD fitting


37

RECESS

ED

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0

3 POLE GST18i3 BLACK

teRM iD. APPl. WiRe coloUR

l1 live Brown

Pe earth Yellow/green

n neutral Blue

Modular wiring is a proven way to reduce installationtime on-site, reduce the risk of errors and increaseflexibility for the future. We can offer a comprehensiverange of modular wiring solutions, as presented belowand on the next 2 pages. if you require assistanceor advice, please contact our technical departmenton +44 (0)121 457 6344

Modular wiring is most commonly used with modularfittings in recessed installations, but can be used withother fittings, such as the Michigan range of recessedcircular downlights or the Monterey leD panel.

We offer 3, 4, 5 and 6-pole modular wiring options, allbased on the industry-standard Wieland gst18 rangeof connectors (or an interchangeable equivalent byanother european manufacturer).

in some cases (eg 5 and 6-pole) there is more thanone range of Wieland connectors, and these are notcompatible with each other. to avoid confusion, andin accordance with accepted industry practice, werefer to the different connector systems by the colourof the mouldings.

For each range of connectors there is a designatedposition, application and wiring colour for each pole,as follows. these conventions are followed on allmodular wiring we supply that is ordered using theorder codes and suffixes detailed on these pages.



1 live Brown


n neutral Blue

2 em. live Black



1 live Brown

2 - Dim White


n neutral Blue

3 + Dim Red

6 POLE GST18i6 BLACK & PASTEL BLUE


l live Brown


n neutral Blue

1 em. live Black

2 + Dim Red

3 - Dim White

5 POLE GST18i5 PASTEL BLUE


+ + Dim Red

- - Dim White


n neutral Blue

l live Brown

6 POLE GST18i6 BLACK & GREY


l live Brown


n neutral Blue

l em. live Black

Pe + Dim Red

n - Dim White

Wiring standards: As listed on these pages, all flex used in our modular wiring has low smoke zero halogen(ls0h) and black or white insulation. All conductors are 1.5mm2. Alternative specifications are available byspecial order.

MODULAR WIRING


www.nvcuk

.com

|+44(0)121

457

634

0RECESS

ED

lig

ht

ing

38

MODULAR WIRING COMPONENTS SUPPLIED AS PART OF A LUMINAIREsome modular wiring components are supplied as part of the luminaire. to order these, add the necessaryorder code suffix (from the list below) to the luminaire's code when ordering.

MODULAR WIRING COMPONENTS SUPPLIED AS SEPARATE ITEMS

Available on BisMARcK, illinois, ioWA, iDAho, inDiAnA. MontAnA,seAttle, AtlAntA & oRegon. (When ordering this most customersalso order a 4-pole t, ncon/t/gst18/4 from the list below)

MALE PANEL MOUNTED CONNECTORS T PIECE ON 0.5M FLYING LEAD

sUFFiX DescRiPtion AVAilABilitY

/M02 MAle PAnel MoUnt 4-Pole gst18 BlAcK see note below


/t01 t FlYing leAD 3-Pole 0.5M gst18i3 BlAcK All recessed



/t04 t FlYing leAD 5-Pole 0.5M gst18i5 P BlUe All recessed

/t05 tFlYingleAD6-Pole0.5Mgst18i6BlAcK/PBlUe All recessed

/t06 t FlYing leAD 6-Pole 0.5M gst18i6 BlAcK/gReY All recessed

T PIECE PANEL MOUNTED

MALE CONNECTOR ON 3M LEAD


/t09 t PAnel MoUnt 6-Pole 6 coRe gst18i6 BlAcK/P BlUe All recessed

/t10 t PAnel MoUnt 6-Pole 6 coRe gst18i6 BlAcK/gReY All recessed

MALE CONNECTOR ON 5M LEAD


/l07 leAD MAle 3-Pole 5M gst18 BlAcK All recessed



/l10 leAD MAle 5-Pole 5M gst18 P BlUe All recessed

/l11 leAD MAle 6-Pole 5M gst18 BlAcK/P BlUe All recessed

/l12 leAD MAle 6-Pole 5M gst18 BlAcK/gReY All recessed





/l04 leAD MAle 5-Pole 3M gst18 P BlUe All recessed

/l05 leAD MAle 6-Pole 3M gst18 BlAcK/P BlUe All recessed

/l06 leAD MAle 6-Pole 3M gst18 BlAcK/gReY All recessed


ncon/t/gst18/4 connectoR t gst18 4-Pole BlAcK


nMW/3/3M/MF MoD WiRe ls0h 3-Pole 3M MAle-FeMAle gst18i3 BlAcK




nMW/5/3M/MF/Bl MoD WiRe ls0h 5-Pole 3M MAle-FeMAle gst18i5 BlAcK

nMW/5/3M/MF/PB MoD WiRe ls0h 5-Pole 3M MAle-FeMAle gst18i5 P BlUe

nMW/5/5M/MF/Bl MoD WiRe ls0h 5-Pole 5M MAle-FeMAle gst18i5 BlAcK

nMW/5/5M/MF/PB MoD WiRe ls0h 5-Pole 5M MAle-FeMAle gst18i5 P BlUe

nMW/6/3M/MF/Blg MoD WiRe ls0h 6-Pole 3M MAle-FeMAle gst18i6 BlAcK/gReY

nMW/6/3M/MF/BlB MoD WiRe ls0h 6-Pole 3M MAle-FeMAle gst18i6 BlAcK/BlUe

nMW/6/5M/MF/Blg MoD WiRe ls0h 6-Pole 5M MAle-FeMAle gst18i6 BlAcK/gReY

nMW/6/5M/MF/BlB MoD WiRe ls0h 6-Pole 5M MAle-FeMAle gst18i6 BlAcK/BlUe

T PIECE - TO MATE WITh PANEL MOUNTED CONNECTORS

WIRING STANDARDS

As listed on these pages, all flex used in our

modular wiring has low smoke zero halogen (ls0h)

black insulation. All conductors are 1.5mm2 and all

free-ends are ferruled. Alternative specifications are

available by special order.

KEY TO ORDER CODE ABBREVIATIONS

/3 3-pole

/4 4-pole

/5 5-pole

/6 6-pole

/3M 3 metre flex length

/5M 5 metre flex length

/FFE Female connector to free end

/MF Male - Female

/BL Black connector

/PB Pastel blue connector

/BLB Black-blue connector

/BLG Black-grey connector

EXTENDER LEADS - TO LINK BETWEEN PIECESAvailable in 3, 4, 5 and 6-pole configurations in 3m and 5m lengths.


nMW/3/3M/FFe MoD WiRe ls0h 3-Pole 3M FeMAle-FRee enD gst18i3 BlAcK




nMW/5/3M/FFe/Bl MoD WiRe ls0h 5-Pole 3M FeMAle-FRee enD gst18i5 BlAcK

nMW/5/3M/FFe/PB MoD WiRe ls0h 5-Pole 3M FeMAle-FRee enD gst18i5 P BlUe

nMW/5/5M/FFe/Bl MoD WiRe ls0h 5-Pole 5M FeMAle-FRee enD gst18i5 BlAcK

nMW/5/5M/FFe/PB MoD WiRe ls0h 5-Pole 5M FeMAle-FRee enD gst18i5 P BlUe

nMW/6/3M/FFe/Blg MoD WiRe ls0h 6-Pole 3M FeMAle-FRee enD gst18i6 BlAcK/gReY

nMW/6/3M/FFe/BlB MoD WiRe ls0h 6-Pole 3M FeMAle-FRee enD gst18i6 BlAcK/BlUe

nMW/6/5M/FFe/Blg MoD WiRe ls0h 6-Pole 5M FeMAle-FRee enD gst18i6 BlAcK/gReY

nMW/6/5M/FFe/BlB MoD WiRe ls0h 6-Pole 5M FeMAle-FRee enD gst18i6 BlAcK/BlUe

FEMALE CONNECTOR TO FREE END (STARTER LEADS)Available in 3, 4, 5 and 6-pole configurations in 3m and 5m lengths.


39

RECESS

ED

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0

the following diagrams illustrate how different modular wiring installations can be configured and ordered, usingour inDiAnA 4 x 14W recessed modular, MonteReY leD panel and MichigAn Pl downlight as examples.

EXAMPLE 14-pole daisy-chain configuration. suitable for installations with integral emergency fittings but no dimming.

EXAMPLE 26-pole daisy-chain configuration. suitable for installations with integral emergency fittings and dimming.

EXAMPLE 36-pole daisy-chain configuration. suitable where integral emergency and dimming are both required and thefittings being used are not available with a panel-mounted connector or a panel-mounted t. examples of suchfittings would be the MonteReY leD panel or the MichigAn Pl downlight.

EXAMPLE 46-pole hub and spoke configuration. suitable for all luminaires in an installation with dimming and integralemergency operation.

NIN414/T5/M02

NIN414/T5/DA/T10

NMY42/LED/DA/T06/850

NIN414/T5/DA/L06

NIN414/T5/DA/L06/M3

NIN414/T5/DA/L06

NIN414/T5/DA/L06

NMY42/LED/DA/T06/850NMI226/DA/T06/840

NIN414/T5/DA/T10NIN414/T5/DA/T10/M3

NCON/T/GST18/4

NMW/4/3M/MF NMW/4/3M/FFE

NCON/T/GST18/4 NCON/T/GST18/4

NIN414/T5/M02NIN414/T5/M02/M3

NMW/6/3M/MF NMW/6/3M/MF NMW/6/3M/FFE

NMW/6/3M/MF NMW/6/3M/MF NMW/6/3M/FFE

NMW/4/3M/MF


www.nvcuk

.com

|+44(0)121

457

634

0RECESS

ED

lig

ht

ing

40


SU

RFA

CE

&S

US

PE

ND

ED

LIG

HTI

NG

CO

NT

EN

TS

SURFA

CE

&SU

SPENDED

lig

ht

ing

co

nt

en

ts

CALIFORNIApage 48

WYOMINGpage 50

HOUSTONpage 52

DALLASpage 53

BERMUDApage 54

BARBADOSpage 55

PASADENApage 56

AMARILLOpage 57

WICHITApage 58

HARVARDpage 42

YALEpage 44

PRINCETONpage 45

BENTONpage 46

CODYpage 47

NVC_SURF&SUSP.qxp:SURF&SUSP 22/4/13 13:35

www.nvcuk

.com

|+44(0)121

457

634

0SU

RFA

CE

&SU

SPENDED

lig

ht

ing

42

t5 fittings with polycarbonate controller for surfaceor suspended installation, for 1, 2 or 3 lamps.

HARVARD T5

CONSTRUCTION- steel body, white gloss powder

coated finish- UV stable polycarbonate controller- Polycarbonate end caps- gear tray secured on snap-fit

clips and steel safety wires foreasy installation

APPLICATIONS- corridors and public areas

in schools, colleges and offices.

SPECIFICATION- For 1, 2 or 3 t5 lamps.


control gear- 15/85 uplight/downlight

distribution

OPTIONS- Emergency. maintained 3 hours

available on all versions except3x28W and 3x54W.add suffix m3.

- Dimming. add suffix 1-10, Dsi,Da, sD or cF as required.

- Sensors. available withmicro-wave sensor fitted ontwin lamp versions.add suffix mW.

- Extras. tamper resistant screwsand wire suspension kits availableas listed.

nhV/WiRe/sUsP/KitWire suspension kit

available as an additional item


nhV128/t5 haRVaRD 1X28W t5 sURF+cont












213

87

60028/54W = 1100 35/49W = 1400

28/54W = 1184 35/49W = 1484

attachments


nhV/scReWs/VanDal/PK4 haRVaRD/PRinceton scReWs VanDal Resistant PK 4

nhV/WiRe/sUsP/Kit haRVaRD/PRinceton WiRe sUsPension Kit 1.5m



nhV136/hF haRVaRD 1X36W t8 hF sURF+cont






213

87

600

36W = 1237 58W = 1537 70W = 1801

36W = 1154 58W = 1454 70W = 1719

attachments




HARVARD T8t8 fittings with polycarbonate controller for surface

or suspended installation, for 1 or 2 lamps.


coated finish- UV stable polycarbonate controller- Polycarbonate end caps- gear tray secured on snap-fit


APPLICATIONS- corridors and public areas in

schools, colleges and offices

SPECIFICATION- For 1 or 2 t8 lamps.

supplied excluding lamps- leading brand enec control gear- 15/85 uplight/downlight distribution

43

SURFA

CE

&SU

SPENDED

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0


available on all versions.add suffix m3.


- Sensors. available withmicro-wave sensor fitted on twinlamp versions. add suffix mW.

- Extras. tamper resistant screwsand wire suspension kitsavailable as listed.




www.nvcuk

.com

|+44(0)121

457

634

0SU

RFA

CE

&SU

SPENDED

lig

ht

ing YALE

44

leD fitting with polycarbonate diffuser for surfaceor suspended installation.


nYa5600/leD/840 Yale 5600 lUmen leD sURF+DiFF col840



CONSTRUCTION- Robust steel and polycarbonate

construction- steel body, white gloss powder

coated finish- UV stable polycarbonate diffuser

and end-caps- Vandal resistant screws and

wire suspension kit available asadditional items as listed

APPLICATIONS- corridors and public areas

in schools, colleges and offices

SPECIFICATION- samsung leDs- inventronics driver- cRi >.8. 4,000K- available in 3 sizes:

- 5,600lm, 57W. 98 l.lm/cW- 7,000lm, 71W. 99 l.lm/cW- 8,400lm, 85W. 99 l.lm/cW

- For surface or suspended installation- 8/92 uplight/downlight distribution



- Dimming. add suffix 1-10 or Daas required.

- Sensors. available withmicro-wave sensor fitted.add suffix mW.

- Extras. tamper resistant screwsand wire suspension kits availableas listed.



attachments





PRINCETONt5 fittings with polycarbonate controller and louvre for

surface or suspended installation, for 1, 2 or 3 lamps.


coated finish- UV stable polycarbonate controllers

with central polycarbonate louvrewith semi-specular finish

- Polycarbonate end caps- gear tray secured on snap-fit


APPLICATIONS- classrooms and offices- corridors and circulation areas

SPECIFICATION- For 1, 2 or 3 t5 lamps.


control gear


nPR128/t5 PRinceton 1X28W t5 sURF+cont+loUV












213

87

60028/54W = 1100 35/49W = 1400

28/54W = 1184 35/49W = 1484

45

SURFA

CE

&SU

SPENDED

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0


available on all versions except3x28W and 3x54W.add suffix m3.


- Sensors. available withmicro-wave sensor fitted ontwin lamp versions.add suffix mW.

- Extras. tamper resistant screwsand wire suspension kitsavailable as listed.

attachments


nha/scReWs/VanDal/PK4 haRVaRD/PRinceton scReWs VanDal Resistant PK 4

nha/WiRe/sUsP/Kit haRVaRD/PRinceton WiRe sUsPension Kit 1.5m




attachments


nBn/scReWs/VanDal/PK2 Benton scReWs VanDal Resistant PacK oF 2www.nvcuk

.com

|+44(0)121

457

634

0SU

RFA

CE

&SU

SPENDED

lig

ht

ing BENTON

46

Robust surface fittings for t5 and t8 lampswith polycarbonate controller and end-caps.




APPLICATIONS- schools and colleges- corridors and back-office areas

SPECIFICATION- For t5 and t8 lamps.


control gear- 25/75 uplight/downlight distribution

CONSTRUCTION- White gloss steel body- Polycarbonate controller- Polycarbonate end-caps

- Sensors. available with micro-wavesensor fitted on twin lampt5 versions only. add suffix mW.

- Extras. tamper resistant screwsavailable as listed.

t5


nBn128/t5 Benton 1X28W t5 sURF+cont








t8


nBn136/hF Benton 1X36W t8 hF sURF + cont

nBn158/hF Benton 1X58W t8 hF sURF+cont






CODYsurface fittings for t5 and t8 lamps, single and twin.


coated finish- specular, double parabolic,

single channel louvre for singleand twin lamp variants

47

SURFA

CE

&SU

SPENDED

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0




- Sensors. available with sensorfitted to lamp. add suffix PiRDor mll as required.

APPLICATIONS- general commercial use

SPECIFICATION- For t5 and t8 lamps.

supplied excluding lamps.- leading brand enec control gear- For surface mounting

t5


ncD128/t5 coDY 1X28W t5 sURF+loUVRe








t8


ncD136/hF coDY 1X36W t8 hF sURF+loUVRe







www.nvcuk

.com

|+44(0)121

457

634

0SU

RFA

CE

&SU

SPENDED

lig

ht

ing CALIFORNIA 4 x T5

48

surface fittings for 4 t5 lamps with louvre.


nca414/t5 caliFoRnia 4X14W t5 sURF+loUVRe

nca414/t5/m3 caliFoRnia 4X14W t5 sURF+loUVRe m3


nca428/t5/m3 caliFoRnia 4X28W t5 sURF+loUVRe m3

CALIFORNIA - 4 LAMP

631

14W

=63

128

W=

1231

55

471

14W

=15

028

W=

500

28W

=50

014

W=

150

14W

=47

128

W=

1031

543

CENTRAL BESASON 28W ONLY



parabolic louvre




control gear- For surface mounting


available on all versions. suffix m3.- Dimming. add suffix 1-10, Dsi, Da,

sD or cF as required.- Sensors. available with PiR sensor

fitted. add suffix PiR or PiRD.

caliFoRnia 4 lamp version isavailable with PiR fitted


CALIFORNIA 1 & 2 x T5surface fittings for 1 or 2 t5 lamps with louvre.



parabolic louvre



excluding lamps- leading brand enec control gear- For surface mounting










CALIFORNIA - 2 LAMP

CALIFORNIA - 1 LAMP

333

28W = 1231 35W = 1531

28W = 500 35W = 600 28W = 500 35W = 600

55

28W = 1031 35W = 1331

245

162

28W = 500 35W = 600 28W = 500 35W = 600

55

28W = 1031 35W = 1331

80

49

SURFA

CE

&SU

SPENDED

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0




- Sensors. available with PiRsensor fitted on 2 lampversions only. add suffix PiRor PiRD.

caliFoRnia 2 lamp version isavailable with PiR fitted


www.nvcuk

.com

|+44(0)121

457

634

0SU

RFA

CE

&SU

SPENDED

lig

ht

ing WYOMING 4 x T8

50

surface fittings for 4 x t8 lamps with louvre.


nWY418/hF WYoming 4X18W t8 hF sURF+loUVRe

nWY418/hF/m3 WYoming 4X18W t8 hF sURF+loUVRe m3


nWY436/hF/m3 WYoming 4X36W t8 hF sURF+loUVRe m3

631

18W

=67

036

W=

1280

65

419

543

18W

=50

936

W=

1079

18W

=15

018

W=

150

36W

=50

036

W=

500CENTRAL BESAS

ON 36W ONLY

WYOMING - 4 LAMP



parabolic louvre




control gear- For surface mounting



sD or cF as required.- Sensors. available with sensor

fitted to lamp. add suffix PiRDor mll as required.


WYOMING 1 & 2 x T8surface fittings for t8 lamps, single and twin.






excluding lamps- leading brand enec control gear- For surface mounting



parabolic louvre








331

36W = 1280 58W = 1580 70W = 1842

36W = 500 58W & 70W = 60036W = 500 58W & 70W = 600

6524

5

36W = 1079 58W = 1331 70W = 1643

165

65

36W = 500 58W & 70W = 60036W = 500 58W & 70W = 600

83

36W = 1079 58W = 1331 70W = 1643

36W = 1280 58W = 1580 70W = 1842

WYOMING - 1 LAMP

WYOMING - 2 LAMP

51

SURFA

CE

&SU

SPENDED

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0

- Sensors. available with sensorfitted to lamp. add suffix PiRDor mll as required.


www.nvcuk

.com

|+44(0)121

457

634

0SU

RFA

CE

&SU

SPENDED

lig

ht

ing HOUSTON

52

surface mounted fittings for t5 lamps witha perforated steel diffuser.


nho228/t5 hoUston 2X28W t5 sURFace PeRF BasKet

nho228/t5/m3 hoUston 2X28W t5 sURFace PeRF BasKet m3







CONSTRUCTION- Robust steel body- Ral9016 semi-gloss powder

coated finish- Perforated steel diffuser- Diffuser retained on steel end caps

and removable for easy cleaning

APPLICATIONS- classrooms- offices and conference rooms- Reception areas



control gear- For surface mounting- 20/80 uplight/downlight distribution



sD or cF as required.- Extras. Plastic diffuser sheets for

insertion inside perforated steelbasket available as additionalitems as listed.

attachments


nho/DiFF/28-54 hoUston DiFFUseR FoR 28 & 54W lamPs

nho/DiFF/49-80 hoUston DiFFUseR FoR 49 & 80W lamPs


DALLASsurface or suspended mounted fittings

with louvre for t5 lamps.



specular aluminium betweenperforated steel sections



excluding lamps- leading brand enec control gear- For surface or suspended mounting- contributes to lg7 compliance

30/70 uplight/downlight distribution


nDl228/t5 Dallas 2X28W t5 sURFace loUVRe




53

SURFA

CE

&SU

SPENDED

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0




- Extras. clear polycarbonatecovers to prevent debriscollecting behind perforatedsteel sections available in pairsas listed.

attachments


nDl/coVeR/28-54 Dallas coVeR FoR 28 & 54W lamPs PaiR

nDl/coVeR/35-49 Dallas coVeR FoR 35 & 49W lamPs PaiR


www.nvcuk

.com

|+44(0)121

457

634

0SU

RFA

CE

&SU

SPENDED

lig

ht

ing BERMUDA

54

surface or suspended linear fittings for t5 lamps.


supplied excluding lamps.- leading brand enec control gear- For surface or suspended installation- available with 3 different optics:

1. Louvre - downlight only, aslisted below, single & twin lamp

2. Louvre - direct/indirect(up and downlight), single &twin lamp

3. Assymetric reflector,single lamp only


CONSTRUCTION- steel body with grey

semi-gloss powder coatedfinish to Ral9006

- miro 5 semi-specular louvreor reflector



- Dimming. add suffix 1-10, Dsi, Da,sD or cF as required.

- Optics. For direct/indirect,add suffix Di. For asymmetric,add suffix as.

- Attachments. Wire suspension kitavailable as an additional item,as listed.


nBm128/t5 BeRmUDa 1X28W t5 + loUVRe










nBm/WiRe/sUsP/Kit

attachments


nBn/WiRe/sUsP/Kit BeRmUDa & BaRBaDos WiRe sUsP Kit PaiR


nBB/WiRe/sUsP/Kit/thRU

BARBADOSsurface or suspended continuous

run linear fittings for t5 lamps.


nBB128/t5/F BaRBaDos 1X28W t5 + loUVRe FiRst in RUn

nBB128/t5/t BaRBaDos 1X28W t5 + loUVRe thRoUgh WiReD

nBB128/t5/l BaRBaDos 1X28W t5 + loUVRe last in RUn

nBB228/t5/F BaRBaDos 2X28W t5 + loUVRe FiRst in RUn

nBB228/t5/t BaRBaDos 2X28W t5 + loUVRe thRoUgh WiReD

nBB228/t5/l BaRBaDos 2X28W t5 + loUVRe last in RUn

55

SURFA

CE

&SU

SPENDED

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0

attachments


nBm/WiRe/sUsP/Kit BeRmUDa & BaRBaDos WiRe sUsP Kit PaiR FiRst & last

nBB/WiRe/sUsP/Kit/thRU BaRBaDosWiResUsPKitFoRthRoUghWiReD

nBB/coRneR/4-Pole BaRBaDos 90° coRneR 4-Pole

nBB/coRneR/6-Pole BaRBaDos 90° coRneR 6-Pole

nBm/WiRe/sUsP/Kit

FiRst thRoUgh last

SPECIFICATION- For single and twin t5 lamps,

28, 35, 49, 54 and 80W.supplied excluding lamps.

- leading brand enec control gear- For surface or suspended installation- available with 2 different miro

5 (semi-specular) optics:1. Louvre - downlight only,

as examples listed, singleand twin lamp

2. Assymetric reflector -single lamp only


CONSTRUCTION- steel body, grey semi-gloss

powder coated to Ral9006- 3 variants of each fitting, all wired

in 4-pole (non-dimming) or6-pole (dimming).1. First in run - suffix F2. Through-wired

(middle of run) - suffix t3. Last in run - suffix l




- Optics. For asymmetric,add suffix as.


www.nvcuk

.com

|+44(0)121

457

634

0SU

RFA

CE

&SU

SPENDED

lig

ht

ing PASADENA

56

suspended fittings for t5 lamps withaluminium body and louvre.

CONSTRUCTION- extruded aluminium side members- Diecast aluminium end caps- White gloss powder coated

finish Ral9016- alanod semi-specular double

parabolic aluminium louvre- supplied complete with

suspension kit




control gear- contributes to lg7 compliance.

c. 38/62 upright/downlightdistribution



- Dimming. add suffix 1-10, Dsi, Da,sD or cF as required.

- Extras. spare wire suspension kitsavailable as listed.


nPs228/t5 PasaDena 2X28W t5 sUsPenDeD + loUVRe

nPs228/t5/m3 PasaDena 2X28W t5 sUsPenDeD + loUVRe m3





nPs/sUsP/Kitsupplied completewith suspension kit

sPaRes


nPs/sUsP/Kit PasaDena WiRe sUsPension Kit


AMARILLOsuspended fittings for t5 lamps with

aluminium body and louvre.

CONSTRUCTION- extruded aluminium side members- injection moulded end caps- light grey powder coated finish- semi-specular anodised aluminium

double parabolic louvre on front- UV stable opal acrylic (Pmma)

diffuser on rear- supplied complete with

suspension wires



supplied excluding lamps- leading brand enec control gear- contributes to lg7 compliance.

36/64 uplight/downlight distribution


nam228/t5 amaRillo 2X28W t5 sUsPenDeD With loUVRe

nam228/t5/m3 amaRillo 2X28W t5 sUsPenDeD With loUVRe m3





57

SURFA

CE

&SU

SPENDED

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0


available on all versions.suffix m3.


- Extras. spare wire suspensionkits available as listed.

nam/WiRe/sUsP/Kitamarillo supplied complete

with wire suspension kit

sPaRes


nam/WiRe/sUsP/Kit amaRillo WiRe sUsPension Kit


www.nvcuk

.com

|+44(0)121

457

634

0SU

RFA

CE

&SU

SPENDED

lig

ht

ing WICHITA

58

Wall mounted fittings for illuminatingceilings and walls. For Pll lamps.


nWh236/Pll Wichita 2X36W Pll Wall Wash



specular aluminium- supplied complete with top cover

made of 4mm toughened glass

APPLICATIONS- class rooms- corridors- conference rooms- Reception areas

SPECIFICATION- For Pll lamps.


control gear- For wall mounting- contributes to lg7 compliance

OPTIONS- Dimming. add suffix 1-10, Dsi, Da,

sD or cF as required.


SU

RFA

CE

&S

US

PE

ND

ED

LIG

HTI

NG

CO

NT

EN

TS

AMENITY

lig

ht

ing

co

nt

en

ts

ADDISONpage 70

SWIFTpage 72

TENNESSEEpage 74

CHATTANOOGApage 76

FRANKLINpage 78

NASHVILLEpage 80

CLARKSVILLEpage 82

JACKSVILLEpage 60

CHEROKEEpage 61

DAYTONApage 62

MEMPHISpage 64

PORTLANDpage 66

GRESHAMpage 68

NVC_AMENITY.qxp:AMENITY 22/4/13 13:39

www.nvcuk

.com

|+44(0)121

457

634

0AMENITY

lig

ht

ing

JACKSVILLE60

iP65 circular leD fitting with a choice of covers.


nJA/BAse/13/leD/750 JAcKsVille BAse 13W leD iP65

nJA/BAse/13/leD/M3/750 JAcKsVille BAse 13W leD iP65 +M3

nJA/BAse/13/leD/MW/750 JAcKsVille BAse 13W leD iP65 +MW

nJA/BAse/13/leD/cF/750 JAcKsVille BAse 13W leD iP65 +cF

nJA/BAse/13/leD/cFMW/750 JAcKsVille BAse 13W leD iP65 +cF+MW

nJA/coVeR/2213/BK JAcKsVille coV stAnDARD 2213 PK 12

nJA/coVeR/2214/BK JAcKsVille coV cRoss hAlF Moon 2214 PK 12

nJA/coVeR/2215/BK JAcKsVille coV hAlF Moon 2215 PK 12

nJA/coVeR/2217/BK JAcKsVille coV centRe BAnD slotteD 2217 PK 12

nJA/coVeR/AssoRtA/BK JAcKsVille coV AssoRtMent A 3 X 4 tYPes

CONSTRUCTION- Polycarbonate base and diffuser- extremely robust construction

and even light distribution- supplied complete with your choice

of any 1 of 4 decorative covers.covers are available singly fromwholesalers, and are distributedto them in packs of 12.

APPLICATIONS- Paths and porches- communal and circulation areas

SPECIFICATION- 168 leDs- cRi >.7. 5000K- estimated 50,000 hours life- 825 lumens, 13W, 63 l.lm/c.W


available. suffix M3- Sensors. Micro-wave occupancy

sensor available. suffix MW- Corridor function. Dim-to-10%

available. suffix cF

centre Band slotted

cross half Moonstandard cover half Moon


CHEROKEEiP65 circular polycarbonate leD fitting.

CONSTRUCTION- Polycarbonate base and

opal polycarbonate diffuser- Polycarbonate clips- hinged diffuser for easy installation- Fully sealed for iP65

APPLICATIONS- Bathrooms- halls, porches and entrance lobbies

SPECIFICATION- two sizes:

- 15W, 750 lumens. 50 l.lm/cW- 23W, 1,250 lumens. 54 l.lm/cW

- >.8 cRi. 4,000K


ncK800/leD/840 cheRoKee 800lM leD iP65 RnD col840

ncK1300/leD/840 cheRoKee 1300lM leD iP65 RnD col840

ncK1300/leD/M3/840 cheRoKee 1300lM leD M3 iP65 RnD col840

15W 23W

61

AMENITY

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0


available on larger size only.suffix M3.

- Dimming, Sensors etc.Please enquire for detailsand availability

hinged cover foreasy access



nDY16/leD/Wh/o/750 DAYtonA 16W leD iP65 RnD Wh+oPAl

nDY16/leD/Wh/o/M3/750 DAYtonA 16W leD iP65 RnD Wh+oPAl+M3

nDY16/leD/BK/o/750 DAYtonA 16W leD iP65 RnD BK+oPAl

nDY16/leD/BK/o/M3/750 DAYtonA 16W leD iP65 RnD BK+oPAl+M3141

40 141

112

Ø285 85

50 PCD

23

www.nvcuk

.com

|+44(0)121

457

634

0AMENITY

lig

ht

ing

DAYTONA LED62

iP65 circular polycarbonate leD bulkhead fittings.

CONSTRUCTION- Round polycarbonate base, black

or white- special polycarbonate opal diffuser

for leDs

APPLICATIONS- Walkways and stairwells- car parks etc

SPECIFICATION- 192 leDs with special opal

diffuser giving very even light- 1030 lumens, 16W- >64 l.lm/c.W- 5,000K cRi >.7


versions available. suffix M3.- Dimming. Dim-to-10%

(corridor function) available.Add suffix cF.

- Sensors. Available withmicro-wave sensor fitted.Add suffix MW

- Base. Black (BK) or white (Wh)

Available withmicro-wave sensor fitted

BENEFITS OF LED

- Virtually zero maintenance.- 47% energy saving compared with 28W 2D- Efficiency

- 16W leD 64 luminaire lumens/circuit watt- 28W 2D 44 luminaire lumens/circuit watt

- Ideal for use with sensors. leDs are not effectedby frequent switching (unlike 2D lamps) so they canbe used with sensors

- Good looks - even light and no unsightly lamp-image


DAYTONAiP65 circular polycarbonate fittings with 2D lamps.


available on hF versions.- Dimming. Dim-to-10% (corridor

function) available on hF versions.Add suffix cF.

- Sensors. hF versions available withmicro-wave occupancy sensorfitted to gear tray. Add suffix MW.if frequent switching is requiredconsider using leD version.if considering the use of multipleMW sensors in the same circuitseek our advice first.


SPECIFICATION- 28W with hF control gear and

branded col 840 lamp- 16W and 28W with magnetic

gear and col 840 lamp

CONSTRUCTION- Polycarbonate base, black or white- Polycarbonate cover, opal or

clear prismatic- steel gear tray

63

AMENITY

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0

- Photo-cell. All versions exceptMW available with dusk/dawnphoto-cell. Add suffix Pec.

- LED. leD versions available.see opposite page.

- Base. Black (BK) or white (Wh),as listed.

- Cover. Prismatic as shown andlisted. For opal, add suffix o

141

40 141

112

Ø285 85

50 PCD

23

106

2814

0

78

Ø204 85

50 PCD

23

DAYTONA 28W 2D DAYTONA 16W 2DoRDeR coDe DescRiPtion

nDY28/2D/hF/Wh/P/840 DAYtonA 28W2D hF iP65 RnD Wh+PRisM+lAMP

nDY28/2D/hF/BK/P/840 DAYtonA 28W2D hF iP65 RnD BlK+PRisM+lAMP

nDY16/2D/Wh/P/840 DAYtonA 16W2D iP65 RnD Wh+PRisM+lAMP

nDY16/2D/BK/P/840 DAYtonA 16W2D iP65 RnD BlK+PRisM+lAMP

nDY28/2D/Wh/P/840 DAYtonA 28W2D iP65 RnD Wh+PRisM+lAMP

nDY28/2D/BK/P/840 DAYtonA 28W2D iP65 RnD BlK+PRisM+lAMP

Available with micro-waveoccupancy sensor fitted

to gear tray. Add suffix MW.


www.nvcuk

.com

|+44(0)121

457

634

0AMENITY

lig

ht

ing

MEMPHIS LED64

iP65 square polycarbonate leD bulkhead fittings.

CONSTRUCTION- square polycarbonate base,

black or white- special polycarbonate opal diffuser

for leDs







- Sensor. Available withmicro-wave sensor fitted.Add suffix MW.

- Base. Black (BK) or white (Wh)


nMM16/leD/Wh/o/750 MeMPhis 16W leD iP65 sQU Wh+oPAl

nMM16/leD/Wh/o/M3/750 MeMPhis 16W leD iP65 sQU Wh+oPAl+M3

nMM16/leD/BK/o/750 MeMPhis 16W leD iP65 sQU BK+oPAl

nMM16/leD/BK/o/M3/750 MeMPhis 16W leD iP65 sQU BK+oPAl+M3256 90 171

171

256

25 60

50 PCD

BENEFITS OF LED







MEMPHISiP65 square polycarbonate fittings with 2D lamps.

65

AMENITY

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0

256 90 171

171

2525

6

60

202 88 120

120

18

202

30

50 PCD50 PCD

MEMPHIS 28W 2D MEMPHIS 16W 2DoRDeR coDe DescRiPtion

nMM28/2D/hF/Wh/P/840 MeMPhis 28W2D hF iP65 sQU Wh+PRisM+lAMP

nMM28/2D/hF/BK/P/840 MeMPhis 28W2D hF iP65 sQU BlK+PRisM+lAMP

nMM16/2D/Wh/P/840 MeMPhis 16W2D iP65 sQU Wh+PRisM+lAMP

nMM16/2D/BK/P/840 MeMPhis 16W2D iP65 sQU BlK+PRisM+lAMP

nMM28/2D/Wh/P/840 MeMPhis 28W2D iP65 sQU Wh+PRisM+lAMP

nMM28/2D/BK/P/840 MeMPhis 28W2D iP65 sQU BlK+PRisM+lAMP


to gear tray


available on hF versions.- Dimming. Dim-to-10% (corridor




SPECIFICATION- 28W with hF control gear and

branded col 840 lamp- 16W and 28W with magnetic


CONSTRUCTION- Polycarbonate base, black or white- Polycarbonate cover, opal or

clear prismatic- steel gear tray

- Photo-cell. All versions exceptMW available with dusk/dawnphoto-cell. Add suffix Pec.


- Base. Black (BK) or white (Wh),as listed.

- Cover. Prismatic as shown andlisted. For opal, add suffix o


www.nvcuk

.com

|+44(0)121

457

634

0AMENITY

lig

ht

ing

PORTLAND LED66

iP54 decorative leD bulkhead fittings.

CONSTRUCTION- special polycarbonate opal diffuser

for leDs

APPLICATIONS- general circulation areas- toilets and changing rooms






- Sensors. Available withmicro-wave sensor fitted.suffix MW

- Bezel. White (Wh) orchrome effect (ch)


nPo16/leD/Wh/o/750 PoRtlAnD 16W leD iP54 White oPAl

nPo16/leD/Wh/o/M3/750 PoRtlAnD 16W leD iP54 White oPAl +M3

nPo16/leD/ch/o/750 PoRtlAnD 16W leD iP54 chRoMe oPAl

nPo16/leD/ch/o/M3/750 PoRtlAnD 16W leD iP54 chRoMe oPAl +M3

nPo16/leD/Wh/o/MW/750 PoRtlAnD 16W leD iP54 White oPAl +MW

nPo16/leD/Wh/o/MW/M3/750 PoRtlAnD16WleDiP54WhiteoPAl+MW+M3

nPo16/leD/ch/o/MW/750 PoRtlAnD 16W leD iP54 chRoMe oPAl +MW

nPo16/leD/ch/o/MW/M3/750 PoRtlAnD16WleDiP54chRoMeoPAl+MW+M3100325 160

160

30

87

Ø50 PCD

CABLE ENTRY


BENEFITS OF LED






PORTLANDiP54 decorative bulkhead fittings with 2D lamps.

67

AMENITY

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0

PORTLAND 28W/38W 2D

100325 160

160

30

87

Ø50 PCD

CABLE ENTRY

PORTLAND 16W 2D

100270Ø50 PCD

40

69

Ø170 PCD

CABLE ENTRY


nPo28/2D/hF/Wh/o/840 PoRtlAnD 28W2D hF iP54 White oPAl+lAMP

nPo38/2D/hF/Wh/o/840 PoRtlAnD 38W2D hF iP54 White oPAl+lAMP

nPo16/2D/Wh/o/840 PoRtlAnD 16W2D iP54 White oPAl+lAMP

nPo28/2D/Wh/o/840 PoRtlAnD 28W2D iP54 White oPAl+lAMP


to gear tray


available on 28W hF versions only.Add suffix M3

- Dimming. Dim-to-10% (corridorfunction) available on hF versions.Add suffix cF



SPECIFICATION- 28 and 38W with hF control gear

and branded col 840 lamp- 16W and 28W with magnetic


CONSTRUCTION- Polycarbonate base, cover

and bezel

- Bezel. White (Wh) orchrome effect (ch)

- Diffuser. opal as listed. Forclear prismatic replace o with P.



www.nvcuk

.com

|+44(0)121

457

634

0AMENITY

lig

ht

ing

GRESHAM LED68

iP54 decorative leD bulkhead fittings.

CONSTRUCTION- special polycarbonate opal diffuser

for leDs.







- Sensors. Available withmicro-wave sensor fitted.suffix MW.


ngR16/leD/ch/o/750 gReshAM 16W leD iP54 chRoMe oPAl

ngR16/leD/ch/o/M3/750 gReshAM 16W leD iP54 chRoMe oPAl +M3

ngR16/leD/ch/o/MW/750 gReshAM 16W leD iP54 chRoMe oPAl +MW

ngR16/leD/ch/o/MW/M3/750 gReshAM 16W leD iP54 chRoMe oPAl +MW +M3

105Ø389Ø50 PCD

160

160

30

87

CABLE ENTRY


BENEFITS OF LED






GRESHAMiP54 decorative bulkhead fittings with 2D lamps.

69

AMENITY

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0

105Ø389Ø50 PCD

160

160

30

87

CABLE ENTRY


ngR28/2D/hF/ch/o/840 gReshAM 28W2D hF iP54 chRoMe oPAl+lAMP

ngR38/2D/hF/ch/o/840 gReshAM 38W2D hF iP54 chRoMe oPAl+lAMP

ngR16/2D/ch/o/840 gReshAM 16W2D iP54 chRoMe oPAl+lAMP

ngR28/2D/ch/o/840 gReshAM 28W2D iP54 chRoMe oPAl+lAMP


to gear tray


available on 28W only.Add suffix M3.

- Dimming. Dim-to-10% (corridorfunction) available on hF versions.Add suffix cF.


SPECIFICATION- 28 and 38W with hF control gear

and branded col 840 lamp

CONSTRUCTION- Polycarbonate base and cover- Polycarbonate chrome

effect bezel

- Sensors. Available withmicro-wave occupancy sensorfitted to gear tray. Add suffixMW. if frequent switching isrequired consider using leDversion. if consideringthe use of multiple MW sensorsin the same circuit seek ouradvice first.

- Diffuser. opal as listed. For clearprismatic replace o with P.



www.nvcuk

.com

|+44(0)121

457

634

0AMENITY

lig

ht

ing

ADDISON LED70

iP40 decorative circular leD fittings.

CONSTRUCTION- steel body and opal acrylic diffuser

APPLICATIONS- corridors, foyers and

general circulation areas


diffuser giving very even light- 755 lumens, 16W- >47 l.lm/c.W- 5,000K, cRi >.7





- Body. White painted (Wh) orchrome plated (ch).


nAD16/leD/Wh/750 ADDison 16W leD iP40 White BAse

nAD16/leD/Wh/M3/750 ADDison 16W leD iP40 White BAse +M3

nAD16/leD/ch/750 ADDison 16W leD iP40 chRoMe BAse

nAD16/leD/ch/M3/750 ADDison 16W leD iP40 chRoMe BAse +M3

nAD16/leD/Wh/MW/750 ADDison 16W leD iP40 White BAse +MW

nAD16/leD/Wh/MW/M3/750 ADDison 16W leD iP40 White BAse +MW +M3

nAD16/leD/ch/MW/750 ADDison 16W leD iP40 chRoMe BAse +MW

nAD16/leD/ch/MW/M3/750 ADDison 16W leD iP40 chRoMe BAse +MW +M3Ø425 114Ø51 PCD

Ø270 PCD



ADDISONiP40 circular fittings for surface mounting

with t5 circular and 2D lamps.

71

AMENITY

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0

Ø425 114Ø51 PCD

Ø270 PCD


nAD28/2D/hF/Wh/840 ADDison 28W2D hF iP40 White BAse +840 lAMP

nAD28/2D/hF/Wh/M3/840 ADDison 28W2D hF iP40 White BAse M3 +840 lAMP

nAD38/2D/hF/Wh/840 ADDison 38W2D hF iP40 White BAse +840 lAMP

nAD38/2D/hF/Wh/M3/840 ADDison 38W2D hF iP40 White BAse M3 +840 lAMP

nAD55/t5c/Wh/840 ADDison 55Wt5c iP40 White BAse +840 lAMP

nAD55/t5c/Wh/M3/840 ADDison 55Wt5c iP40 White BAse M3 +840 lAMP


to gear tray

OPTIONS- Emergency. Maintained 3 hours.

suffix M3- Dimming. Dim-to-10% (corridor

function) available on hF versions.Add suffix cF

- Sensors. Available with micro-waveoccupancy sensor fitted to geartray. Add suffix MW. if frequentswitching is required considerusing leD version. if consideringthe use of multiple MW sensors inthe same circuit seek ouradvice first.



SPECIFICATION- 2D 28W & 38W and t5 circular 55W- supplied with branded col 840 lamp

CONSTRUCTION- steel base with white powder

coated or chrome plated finish- opal acrylic diffuser- steel gear tray, retained on strap

for easy installation and maintenance

- Body. White (Wh) as listed.For chrome use suffix ch



www.nvcuk

.com

|+44(0)121

457

634

0AMENITY

lig

ht

ing

SWIFT LED72

iP40 decorative circular leD fittings.

CONSTRUCTION- steel body and opal acrylic diffuser




diffuser giving very even light- 755 lumens, 16W- >47 l.lm/c.W- 5,000K, cRi >.7





- Body. White painted (Wh),chrome plated (ch) or brassplated (add suffix BR).


nsW16/leD/Wh/750 sWiFt 16W leD iP40 White BAse

nsW16/leD/Wh/M3/750 sWiFt 16W leD iP40 White BAse +M3

nsW16/leD/ch/750 sWiFt 16W leD iP40 chRoMe BAse

nsW16/leD/ch/M3/750 sWiFt 16W leD iP40 chRoMe BAse +M3

nsW16/leD/Wh/MW/750 sWiFt 16W leD iP40 White BAse +MW

nsW16/leD/Wh/MW/M3/750 sWiFt 16W leD iP40 White BAse +MW +M3

nsW16/leD/ch/MW/750 sWiFt 16W leD iP40 chRoMe BAse +MW

nsW16/leD/ch/MW/M3/750 sWiFt 16W leD iP40 chRoMe BAse +MW +M3



SWIFTiP40 fittings for t5 circular and 2D lamps.

73

AMENITY

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0


nsW22/t5c/Wh/840 sWiFt 22Wt5c iP40 White BAse+840 lAMP

nsW28/2D/hF/Wh/840 sWiFt 28W2D hF iP40 White BAse+840 lAMP

nsW38/2D/hF/Wh/840 sWiFt 38W2D hF iP40 White BAse+840 lAMP

nsW16/2D/Wh/840 sWiFt 16W2D iP40 White BAse+840 lAMP


to gear tray


Add suffix M3.- Dimming. Dim-to-10% (corridor


- Sensors. hF versions available withmicro-wave occupancy sensorfitted to gear tray. Add suffix MW.if frequent switching is requiredconsider using leD version.if considering the use of multipleMW sensors in the same circuit seekour advice first.



SPECIFICATION- 2D 28/38W and t5 circular

22W, all with hF gear- 2D 16W with magnetic gear- All versions supplied with

branded colour 840 lamp

CONSTRUCTION- steel body with white powder

coated or plated finish- opal acrylic diffuser- steel gear tray retained on strap for

easy installation and maintenance

- Body. White (Wh) as listed.For chrome or brass usesuffixes ch or BR.



www.nvcuk

.com

|+44(0)121

457

634

0AMENITY

lig

ht

ing

TENNESSEE LED74

iP65 circular cast aluminium leD bulkhead fitting.

sPARes


ntn/tPscReWs tennessee tAMPeR PRooF scReWs PAcK oF 4 + tool

CONSTRUCTION- Die-cast aluminium base and bezel- grey powder coated textured finish- Polycarbonate opal diffuser

APPLICATIONS- Pedestrian access areas- Building perimeters

SPECIFICATION- 192 leDs with opal diffuser

providing a very even light- 16W power consumption- 47% saving compared with

28W 2D- 5,000K, cRi >.7




- Sensors. Micro-wave occupancysensor available. suffix MW.

- Vandal resistant. For vandalresistant screws, add suffix VR.Vandal resistant screws arealso available as spares,as listed below.


ntn16/leD/750 tennessee 16W leD iP65 AlU BheAD

ntn16/leD/M3/750 tennessee 16W leD iP65 AlU BheAD +M3

ntn16/leD/MW/750 tennessee 16W leD iP65 AlU BheAD +MW

ntn16/leD/MW/M3/750 tennessee 16W leD iP65 AlU BheAD +MW +M3

262

35

155

130Ø351



TENNESSEEiP65 circular decorative cast aluminium bulkheads

for 2D lamps.

75

AMENITY

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0

sPARes



262

35

155

130Ø351


ntn28/2D/hF/840 tennessee 28W2D hF iP65 AlU BheAD +840 lAMP

ntn28/2D/hF/M3/840 tennessee 28W2D hF iP65 AlU BheAD M3 +840 lAMP

ntn38/2D/hF/840 tennessee 38W2D hF iP65 AlU BheAD +840 lAMP

ntn38/2D/hF/M3/840 tennessee 38W2D hF iP65 AlU BheAD M3 +840 lAMP


to gear tray


available. suffix M3- Dimming. Dim-to-10% (corridor


- Sensors. Available with micro-waveoccupancy sensor fitted to gear tray.Add suffix MW. if frequent switchingis required consider using leDversion. if considering the use ofmultiple MW sensors in the samecircuit seek our advice first.

APPLICATIONS- exterior walkways and stairways- Building perimeters

SPECIFICATION- hF control gear and

branded col 840 lamp

CONSTRUCTION- Die-cast aluminium base & bezel- grey powder coated textured finish- Polycarbonate opal diffuser- steel gear tray




www.nvcuk

.com

|+44(0)121

457

634

0AMENITY

lig

ht

ing

CHATTANOOGA LED76


sPARes







28W 2D- 5,000K, cRi >.7







nch16/leD/750 chAttAnoogA 16W leD iP65 AlU BheAD

nch16/leD/M3/750 chAttAnoogA 16W leD iP65 AlU BheAD +M3

nch16/leD/MW/750 chAttAnoogA 16W leD 1P65 AlU BheAD + MW

nch16/leD/MW/M3/750 chAttAnoogA 16W leD 1P65 AlU BheAD + MW + M3



CHATTANOOGAiP65 circular decorative cast aluminium bulkheads

for 2D lamps.

77

AMENITY

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0

sPARes




nch28/2D/hF/840 chAttAnoogA 28W2D hF iP65 AlU BheAD +840 lAMP

nch28/2D/hF/M3/840 chAttAnoogA 28W2D hF iP65 AlU BheAD M3 +840 lAMP

nch38/2D/hF/840 chAttAnoogA 38W2D hF iP65 AlU BheAD +840 lAMP

nch38/2D/hF/M3/840 chAttAnoogA 38W2D hF iP65 AlU BheAD M3 +840 lAMP


to gear tray




- Sensors. Available with micro-waveoccupancy sensor fitted to gear tray.Add suffix MW. if frequent switchingis required consider usingleD version. if considering theuse of multiple MW sensors in thesame circuit seek our advice first.








www.nvcuk

.com

|+44(0)121

457

634

0AMENITY

lig

ht

ing

FRANKLIN LED78


sPARes







28W 2D- 5,000K, cRi >.7







nFR16/leD/750 FRAnKlin 16W leD iP65 AlU BheAD

nFR16/leD/M3/750 FRAnKlin 16W leD iP65 AlU BheAD +M3

nFR16/leD/MW/750 FRAnKlin 16W leD 1P65 AlU BheAD + MW

nFR16/leD/MW/M3/750 FRAnKlin 16W leD 1P65 AlU BheAD + MW + M3



FRANKLINiP65 circular decorative cast aluminium bulkheads

for 2D lamps.

79

AMENITY

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0

sPARes




nFR28/2D/hF/840 FRAnKlin 28W2D hF iP65 AlU BheAD +840 lAMP

nFR28/2D/hF/M3/840 FRAnKlin 28W2D hF iP65 AlU BheAD M3 +840 lAMP

nFR38/2D/hF/840 FRAnKlin 38W2D hF iP65 AlU BheAD +840 lAMP

nFR38/2D/hF/M3/840 FRAnKlin 38W2D hF iP65 AlU BheAD M3 +840 lAMP


to gear tray




- Sensors. Available with micro-waveoccupancy sensor fitted to gear tray.Add suffix MW. if frequent switchingis required consider using leDversion. if considering the use ofmultiple MW sensors in the samecircuit seek our advice first.








www.nvcuk

.com

|+44(0)121

457

634

0AMENITY

lig

ht

ing

NASHVILLE LED80


sPARes


nnA/tPscReWs nAshVille tAMPeR PRooF scReWs PAcK oF 4 + tool





28W 2D- 5,000K, cRi >.7






nnA16/leD/750 nAshVille 16W leD iP65 AlU BheAD

nnA16/leD/M3/750 nAshVille 16W leD iP65 AlU BheAD +M3

262

35

155

142Ø351


NASHVILLEiP65 circular decorative cast aluminium bulkheads

for 2D lamps.



SPECIFICATION- 2D 28W and 38W with hF control

gear and branded col 840 lamp

81

AMENITY

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0



function) available onhF versions. Add suffix cF


- Vandal resistant. For vandalresistant screws, add suffix VR.Vandal resistant screwsare also available as spares,as listed below.

sPARes



262

35

155

142Ø351


nnA28/2D/hF/840 nAshVille 28W2D hF iP65 AlU BheAD +840 lAMP

nnA28/2D/hF/M3/840 nAshVille 28W2D hF iP65 AlU BheAD M3 +840 lAMP

nnA38/2D/hF/840 nAshVille 38W2D hF iP65 AlU BheAD +840 lAMP

nnA38/2D/hF/M3/840 nAshVille 38W2D hF iP65 AlU BheAD M3 +840 lAMP


www.nvcuk

.com

|+44(0)121

457

634

0AMENITY

lig

ht

ing

CLARKSVILLE LED82


sPARes







28W 2D- 5,000K, cRi >.7






ncV16/leD/750 clARKsVille 16W leD iP65 AlU BheAD

ncV/leD/M3/750 clARKsVille 16W leD iP65 AlU BheAD +M3


CLARKSVILLEiP65 circular decorative cast aluminium bulkheads

for 2D lamps.

83

AMENITY

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0

sPARes




ncV28/2D/hF/840 clARKsVille 28W2D hF iP65 AlU BheAD +840 lAMP

ncV28/2D/hF/M3/840 clARKsVille 28W2D hF iP65 AlU BheAD M3 +840 lAMP

ncV38/2D/hF/840 clARKsVille 38W2D hF iP65 AlU BheAD +840 lAMP

ncV38/2D/hF/M3/840 clARKsVille 38W2D hF iP65 AlU BheAD M3 +840 lAMP

CONSTRUCTION- Die-cast aluminium base and bezel- grey powder coated textured finish- Polycarbonate opal diffuser- steel gear tray


SPECIFICATION- 2D 28W and 38W with hF control

gear and branded col 840 lamp


available. suffix M3.- Dimming. Dim-to-10% (corridor

function) available onhF versions. Add suffix cF.




www.nvcuk

.com

|+44(0)121

457

634

0AMENITY

lig

ht

ing

84


CO

NT

EN

TS

RETAIL

&DISPLAY

lig

ht

ing

co

nt

en

ts

ASPENpage 92

MARINpage 94

TORONTOpage 95

VENICEpage 88

QUEBECpage 96

GRACELANDpage 97

MESTREpage 89

COLUSApage 90

SAN DIEGOpage 98

SAN FRANCISCOpage 99

PACIFICpage 100

SEATTLEpage 101

NEVADA T5page 102

RUFUSpage 86

TRINITY v2page 87

NVC_RETAIL.qxp:RETAIL 22/4/13 13:43

www.nvcuk.com

|+44(0)121

457

6340

RETAIL

&DISPLAY

lig

ht

ing

RUFUS86

Decorative pendant downlightwith e27 lampholder.


nRu/e27 Rufus PMMA RetAil hiBAY e27 no geAR

SPECIFICATION- e27 lampholder- for lamps requiring no gear,

or with integral gear- supplied excluding lamp- 75W max

CONSTRUCTION- Body, base and ring in

silver finish aluminium- supplied complete with

1.5m cable suspension and silverfinish aluminium ceiling fixture

- Refractor moulded in PMMA

APPLICATIONS- Retail- leisure- Reception areas

Rufusceiling fixture


TRINITY v2Adjustable surface projector for

metal halide lamps.

CONSTRUCTION- Die-cast aluminium body- textured white powder coated finish- supplied with 0.5m flying lead


ntR/V2/70hQi-De/942 tRinitY V2 70W Mh White PRoJectoR + 942 lAMP

ntR/V2/150hQi-De/942 tRinitY V2 150W Mh White PRoJectoR + 942 lAMP

ntR/V2/BD tRinitY V2 BARn DooRs set of 4

ntR/V2/BA tRinitY V2 BAffles set of 6

ntR/V2/sMB tRinitY V2 suRfAce Mounting BoX

87

RETAIL

&DISPLAY

lig

ht

ing

www.nvcuk.com

|+44(0)121

457

6340

OPTIONS- Barn doors, baffles and surface

mounting fixture all available tobe ordered as additional items,as listed below

APPLICATIONS- Retail- Display

SPECIFICATION- 70W and 150W double-ended

metal halide- supplied with magnetic gear and

branded colour 942 lamp- Adjustable

ntR/V2/sMBsurface Mounting Box

ntR/V2/BABaffles

ntR/V2/BDBarn Doors


www.nvcuk.com

|+44(0)121

457

6340

RETAIL

&DISPLAY

lig

ht

ing

VENICE88

Decorative pendant fittings formetal halide and Pl lamps.


nVn70hQi-e/sM/942 Venice70WMhsMAllPenDAnttiMeD ignitoR+942lAMP

nVn150hQi-e/sM/942 Venice 150WMhsMAllPenDAnttiMeD ignitoR+942lAMP

nVn142/hf/sM/840 Venice42WPlsMAllPenDAnt+840 lAMP

nVn70hQi-e/lg/942 Venice70WMhlARgePenDAnttiMeD ignitoR+942lAMP

nVn150hQi-e/lg/942 Venice 150WMhlARgePenDAnttiMeD ignitoR+942lAMP

nVn142/hf/lg/840 Venice42WPllARgePenDAnt+840 lAMP

SPECIFICATION- for metal halide 70W and 150W

lamps. supplied with magneticgear, timed ignitor and colour942 lamp

- for 42W Pl lamps. supplied withhf gear and colour 840 lamp

- 2 sizes available, small and large.

CONSTRUCTION- spun aluminium body and

reflector with light satin grey finish- Die-cast aluminium ceiling fixture

with light satin grey finish- Zinc plated steel gear tray- toughened glass front cover

with rubber seal and steelretaining clips

- supplied complete with1.5m adjustable wire suspension kitand flex

APPLICATIONS- Retail- leisure and hospitality- Reception and circulation areas


MESTREDecorative pendant leD fittings.

CONSTRUCTION- Polycarbonate housing

and diffuser- Anodised aluminium reflector- supplied complete with 1m

chain suspension


nMe2050/leD/Wh/o/840 MestRe 2050 leD White BoDY oPAl Diff col840

nMe3500/leD/Wh/o/840 MestRe 3500 leD White BoDY oPAl Diff col840

nMe2050/leD/Wh/Bl/840 MestRe 2050 leD White BoDY Blue Diff col840

nMe3500/leD/Wh/Bl/840 MestRe 3500 leD White BoDY Blue Diff col840

89

RETAIL

&DISPLAY

lig

ht

ing

www.nvcuk.com

|+44(0)121

457

6340

OPTIONS- Wire suspension kit,

1.5m, available as alternative tostandard chain suspension

- Opal reflector cover availableto cover the open front ofthe reflector.

- Other colours available.Please ask for details.

APPLICATIONS- Retail- leisure and hospitality- Reception and circulation areas

SPECIFICATION- two versions available:

1. 2,050lm, 31W, 66 l.lm/cW,2. 3,500lm, 53W, 66 l.lm/cW

- cRi >.8. 4,000K

supplied with chainsusension kit

AttAchMents


nMe/WiRe/susP/Kit MestReWiRe susPensionKit 1.5M

nMe/coVeR/oPAl MestReoPAl ReflectoR coVeR


www.nvcuk.com

|+44(0)121

457

6340

RETAIL

&DISPLAY

lig

ht

ing

COLUSA LED90

Rectangular adjustablerecessed leD fitting.


ncl1800/leD/840 colusA 1800 leD 30W RectAngulAR ADJustABle + DRiVeR

ncl3900/leD/840 colusA 3900 leD 45W RectAngulAR ADJustABle + DRiVeR

SPECIFICATION- two sizes available:

- 30W, 1,800lm, 60l.lm/c.W- 45W, 3,900lm, 86l.lm/c.W

- 4000K, cRi>.8

CONSTRUCTION- Die-cast aluminium body and

bezel, with satin white powdercoated finish

- steel mounting bracket- stainless steel mounting clips- Plug/socket connector

between fitting and driver foreasy installation



COLUSARectangular recessed adjustable metal halide fitting.

OPTIONS- for electronic control gear use

suffix ecg- control gear and head available as

separate items as listed

APPLICATIONS- Retail and Display

CONSTRUCTION- Die-cast aluminium body

and bezel- gloss white powder coat finish

SPECIFICATION- 70W and 150W double ended

metal halide- Brand col 942 lamp included- electronic or magnetic

control gear

91

RETAIL

&DISPLAY

lig

ht

ing

www.nvcuk.com

|+44(0)121

457

6340

- gear weights as follows:- 70W electronic - 0.47 kg- 150W electronic - 0.82 kg- 70W magnetic - 2.00 kg- 150W magnetic - 2.60 kg

123143

230

124C

UTO

UT

225 CUTOUT


ncl70hQi-De/942 colusA 70W Mh RectAngulAR ADJust c/W geAR + lAMP

ncl150hQi-De/942 colusA 150W Mh RectAngulAR ADJust c/W geAR + lAMP

ncl70hQi-De/ecg/942 colusA 70W Mh Rect ADJust c/W ecg + lAMP

ncl150hQi-De/ecg/942 colusA 150W Mh Rect ADJust c/W ecg + lAMP

sPARes


ncg70hQi 70W MAgnetic contRol geAR

ncg150hQi 150W MAgnetic contRol geAR

ncl70hQi-De colusA 70W Mh RectAngulAR ADJust heAD onlY

ncl150hQi-De colusA 150W Mh RectAngulAR ADJust heAD onlY

ncg/hiD/70/elec/Ve 70W electRonic contRol geAR VentuRe VYc070255

ncg/hiD/150/elec/Ve 150W electRonic contRol geAR VentuRe VYc150255

BENEFITS OF ELECTRONIC CONTROL GEAR

- 15-20% energy saving- longer lamp life -

lower maintenance costs- constant lamp wattage

gives consistent colourand flux

- no flicker- safe shut-down at end

of lamp life- lightweight

electroniccontrol gear

Magneticcontrol gear


www.nvcuk.com

|+44(0)121

457

6340

RETAIL

&DISPLAY

lig

ht

ing

ASPEN LED92

circular adjustable recessed leD fitting.

SPECIFICATION- single epistar coB light engine- 1,650 lumens, 32W, 52 l.lm/c.W- 4,000K, cRi>.8

CONSTRUCTION- Die-cast aluminium body and

bezel, with satin white powdercoated finish

- heavy-duty steel springmounting clips

- Plug/socket connectionbetween driver and body foreasy installation



nAs1700/leD/840 AsPen 1700 lM leD 30W Rec ciRculAR scooP + DRiVeR


ASPENcircular, recessed adjustable fitting for metal halide lamps.

SPECIFICATION- 70W and 150W g12 metal halide- Brand col 942 lamp included- electronic or magnetic

control gear

93

RETAIL

&DISPLAY

lig

ht

ing

www.nvcuk.com

|+44(0)121

457

6340


suffix ecg- control gear and head available

as separate items as listed- gear weights as follows:

- 70W electronic - 0.47 kg- 150W electronic - 0.82 kg- 70W magnetic - 2.00 kg- 150W magnetic - 2.60 kg


CONSTRUCTION- Die-cast aluminium body

and bezel- Powder coat paint finish,

white (Wh) or silver (si)


nAs70hQi-g12/Wh/942 AsPen 70W Mh ciRc White ADJust c/W geAR + lAMP

nAs70hQi-g12/si/942 AsPen 70W Mh ciRc silVeR ADJust c/W geAR + lAMP

nAs150hQi-g12/Wh/942 AsPen 150W Mh ciRc White ADJust c/W geAR + lAMP

nAs150hQi-g12/si/942 AsPen 150W Mh ciRc silVeR ADJust c/W geAR + lAMP

nAs70hQi-g12/ecg/Wh/942 AsPen 70W Mh ciRc White ADJust c/W ecg + lAMP

nAs70hQi-g12/ecg/si/942 AsPen 70W Mh ciRc silVeR ADJust c/W ecg + lAMP

nAs150hQi-g12/ecg/Wh/942 AsPen 150W Mh ciRc White ADJust c/W ecg + lAMP

nAs150hQi-g12/ecg/si/942 AsPen 150W Mh ciRc silVeR ADJust c/W ecg + lAMP

sPARes


nAs70-150hQi-g12/Wh AsPen 70-150W Mh ciRc White ADJust heAD onlY

nAs70-150hQi-g12/si AsPen 70-150W Mh ciRc silVeR ADJust heAD onlY

ncg/hiD/70/elec/Ve 70WelectRoniccontRolgeARVentuReVYc070255

ncg/hiD/150/elec/Ve 150WelectRoniccontRolgeARVentuReVYc150255

ncg70hQi 70WMAgneticcontRolgeAR


BENEFITS OF ELECTRONIC CONTROL GEAR- 15-20% energy saving- longer lamp life - lower maintenance costs- constant lamp wattage gives consistent

colour and flux- no flicker- safe shut-down at end of lamp life- lightweight




www.nvcuk.com

|+44(0)121

457

6340

RETAIL

&DISPLAY

lig

ht

ing

MARIN94

circular recessed fixed downlight metal halide fitting.

BENEFITS OF ELECTRONIC CONTROL GEAR- 15-20% energy saving- longer lamp life - lower maintenance costs- constant lamp wattage gives consistent colour and flux- no flicker- safe shut-down at end of lamp life- lightweight


nMR70hQi-De/942 MARin70WMhciRculARfiXeDDlc/WgeAR+lAMP

nMR150hQi-De/942 MARin 150WMhciRculARfiXeDDlc/WgeAR+lAMP

nMR70hQi-De/ecg/942 MARin70WMhciRculARfiXeDc/Wecg+lAMP

ncl150hQi-De/ecg/942 MARin 150WMhciRculARfiXeDc/Wecg+lAMP

sPARes




nMR70hQi-De MARin70WMhciRculARfiXeDDlheADonlY

nMR150hQi-De MARin 150WMhciRculARfiXeDDlheADonlY

ncg/hQi/70/elec/Ve 70WelectRoniccontRolgeAR VentuRe V70Msc255

ncg/hQi/150/elec/Ve 150WelectRoniccontRolgeAR VentuReV150ssc255

SPECIFICATION- 70W and 150W double ended

metal halide- leading brand col 942 lamp included- electronic or magnetic control gear

CONSTRUCTION- Die-cast aluminium body and bezel- gloss white powder coat finish


suffix ecg- control gear and head available as

separate items as listed- gear weights as follows:

- 70W electronic - 0.47Kg- 150W electronic - 0.82Kg- 70W magnetic - 2.00 kg- 150W magnetic - 2.60 kg





TORONTOhigh quality iP65 leD downlight.

CONSTRUCTION- Die cast aluminium bezel and

heat sink- high-performance graphite

thermal interface for long life- high-performance nano-diffuser

for efficiency and glare control- separate driver for improved

maintenance and longevity- supplied complete with fixed

output (non-dimmable) driver

APPLICATIONS- circulation areas in hotels

and offices- Bathrooms- energy saving replacement of

conventional MR16 downlights

SPECIFICATION- 10W of leading brand leDs- 70˚ beam angle - ideal for

general lighting applications- cRi >.85. 3,000K (830) or

4,000K (840)- 570 lumens

95

RETAIL

&DISPLAY

lig

ht

ing

www.nvcuk.com

|+44(0)121

457

6340


available. Add suffix M3.- Dimming. Add suffix 1-10

or DA as required.- Finishes. Bezel in white (Wh),

chrome (ch) and satin chrome(sch).


ntt10/leD/Wh/830 toRonto leD DoWnlight 3000K White

ntt10/leD/ch/830 toRonto leD DoWnlight 3000K chRoMe

ntt10/leD/sch/830 toRonto leD DoWnlight 3000K sAtin chRoMe

ntt10/leD/Wh/840 toRonto leD DoWnlight 4000K White

ntt10/leD/ch/840 toRonto leD DoWnlight 4000K chRoMe

ntt10/leD/sch/840 toRonto leD DoWnlight 4000K sAtin chRoMe

sPARe DRiVeRs


D000009 leD DRiVeR DAli 11W 10-15V 0.7A

D000010 leD DRiVeR non-DiM 14W 10-20V 0.7A

Ø80 CUTOUT

Ø100

576


FIXED GIMBAL IP65

www.nvcuk.com

|+44(0)121

457

6340

RETAIL

&DISPLAY

lig

ht

ing

QUEBEC96

universal fire rated downlights suitable for mainstungsten, mains leD or low-voltage tungsten lamps.

fiXeD


nQe/1X50/Wh QueBec fiRe RAteD D/light fiXeD White no lAMP

nQe/1X50/ch QueBec fiRe RAteD D/light fiXeD chRoMe no lAMP

nQe/1X50/sch QueBec fiRe RAteD D/light fiXeD sAtin chRoMe no lAMP

giMBAl


nQe/1X50/g/Wh QueBec fiRe RAteD D/light giMBAl White no lAMP

nQe/1X50/g/ch QueBec fiRe RAteD D/light giMBAl chRoMe no lAMP

nQe/1X50/g/sch QueBec fiRe RAteD D/light giMBAl sAtin chRoMe no lAMP

iP65


nQe/1X35/iP65/Wh QueBecfiReRAteDD/light iP65White no lAMP

nQe/1X35/iP65/ch QueBecfiReRAteDD/light iP65chRoMe no lAMP

nQe/1X35/iP65/sch QueBecfiReRAteDD/light iP65sAtin chRoMe nolAMP

lAMPs & tRAnsfoRMeRs


nlAMP/4/leD/gu10/730/stAR nVcstARleD4W30° non-DiM3000K






ncg/XfMR/60 tRAnsfoRMeR60VA DiMMABle

Quebec fixed Quebec gimbal Quebec iP65

APPLICATIONS- Retail- hotels and domestic

SPECIFICATION- supplied with

- gu10 lampholder fitted, suitable for 230v lamps- gX5.3 lampholder also included, suitable for lV

lamps. transformer required, listed below.- tested to Bs476, Part B, 30, 60 and 90 minutes

fire rated.- lamps not included

CONSTRUCTION- Aluminium body- three finishes available. White (Wh), chrome (ch)

and satin chrome (sch)- three body types available.

fixed, gimbal (g) and iP65 (iP65)

OPTIONS- low-voltage dimmable transformers available.

to be ordered as separate items.- leD gu10 lamps available. to be ordered as

separate items.

ncg/XfMR/60

gX5.3lamp holder

leD lamp


GRACELANDDimmable fire-rated leD downlights with separate driver.

97

RETAIL

&DISPLAY

lig

ht

ing

www.nvcuk.com

|+44(0)121

457

6340

CONSTRUCTION- 10W leD module with

aluminium heatsink- supplied with white painted

pressed steel bezel withborosilicate glass

- separate driver forimproved reliability

- Plug/socket connector betweendriver and leD module for easyinstallation and maintenance

- supplied with loft insulationseparator - see main picture

APPLICATIONS- Retail- hotels and leisure- Domestic kitchens and bathroom

SPECIFICATION- iP65 rated to the front of the

fitting when installed- 30, 60 and 90 minutes fire rated- choice of two colour temperatures:

- 3,000K, 480lm- 5,000K, 580lm

- cRi >.8, 60˚ beam angle -ideal for general lighting

- selV driver. Pf 0.92- Dimmable with standard wall

dimmer - details in instructions.

OPTIONS- Bezels. Alternative bezels

available as listed below,supplied as separate items.

- Beam angles. 36° beam angleavailable. check availabilitybefore ordering.


ngl10/leD/Wh/60/830 gRAcelAnD 10W leD 60° 3000K White BeZel + DM DRiVeR

ngl10/leD/Wh/60/850 gRAcelAnD 10W leD 60° 5000K White BeZel + DM DRiVeR

AttAchMents


ngl/Be/ch gRAcelAnD chRoMe BeZel

ngl/Be/sch gRAcelAnD sAtin chRoMe BeZel


www.nvcuk.com

|+44(0)121

457

6340

RETAIL

&DISPLAY

lig

ht

ing

SAN DIEGO98

track mounted mains leD spotlights.

24W

30W

24W 30W


nsD24/leD/Wh/740 sAn Diego 24W leD tRAcK MounteD sPot White

nsD24/leD/si/740 sAn Diego 24W leD tRAcK MounteD sPot silVeR

nsD30/leD/Wh/740 sAn Diego 30W leD tRAcK MounteD sPot White

nsD30/leD/si/740 sAn Diego 30W leD tRAcK MounteD sPot silVeR

sPARes


nsD24/lens/15DegRee sAn Diego + sAn fRAncisco 24W lens 15 DegRee




nsD24/BeZel/BlAcK sAn Diego 24W scReW BeZel BlAcK

nsD30/BeZel/BlAcK sAn Diego 30W scReW BeZel BlAcK

CONSTRUCTION- Die-cast aluminium luminaire body

and bezel- interchangeable acryllic (PMMA) lens

secured behind removable bezel- ABs driver enclosure- luminaire angle fully adjustable- fits single-circuit track,

see page 100

OPTIONS- Colours. Available in 2 colours,

White (Wh) and silver (si)- Extras. lenses and bezels

available as spares- for track, see page 100

APPLICATIONS- Retail- entertainment and leisure

SPECIFICATION- 24W, 12 leDs, 1,200 lumens- 30W, 15 leDs, 1,500 lumens- supplied complete with 2 lenses

for 15˚ and 30˚ beam angles- supplied complete with

built-in driver


SAN FRANCISCOtrack mounted mains leD spotlights.

99

RETAIL

&DISPLAY

lig

ht

ing

www.nvcuk.com

|+44(0)121

457

6340

CONSTRUCTION- Die-cast aluminium luminaire

body and bezel- interchangeable acryllic (PMMA) lens

secured behind removable bezel- ABs driver enclosure- luminaire angle fully adjustable- fits single-circuit track,

see page 100

APPLICATIONS- Retail- entertainment and leisure

SPECIFICATION- 24W, 12 leDs, 1,200 lumens- 30W, 15 leDs, 1,500 lumens- supplied complete with 2 lenses

for 15˚ and 30˚ beam angles- supplied complete with

built-in driver

OPTIONS- Colours. Available in 2 colours,

White (Wh) and silver (si)- Extras. lenses and bezels

available as spares- for track, see page 100

24W

30W


nsf24/leD/Wh/740 sAn fRAncisco 24W leD tRAcK MounteD sPot White 4000K

nsf24/leD/si/740 sAn fRAncisco 24W leD tRAcK MounteD sPot silVeR 4000K

nsf30/leD/Wh/740 sAn fRAncisco 30W leD tRAcK MounteD sPot White 4000K

nsf30/leD/si/740 sAn fRAncisco 30W leD tRAcK MounteD sPot silVeR 4000K

sPARe






nsf24/BeZel/BlAcK sAn fRAncisco 24W scReW BeZel BlAcK

nsf30/BeZel/BlAcK sAn fRAncisco 30W scReW BeZel BlAcK

24W 30W


www.nvcuk.com

|+44(0)121

457

6340

RETAIL

&DISPLAY

lig

ht

ing

PACIFIC100

16A rated single circuit mains track.

tRAcK


nPA/tRAcK/1M/Wh PAcific 1-ciRcuit tRAcK 1M White + DeAD enD

nPA/tRAcK/1M/si PAcific 1-ciRcuit tRAcK 1M silVeR + DeAD enD

nPA/tRAcK/1M/BK PAcific 1-ciRcuit tRAcK 1M BlAcK + DeAD enD

nPA/tRAcK/1.5M/Wh PAcific 1-ciRcuit tRAcK 1.5M White + DeAD enD

nPA/tRAcK/1.5M/si PAcific 1-ciRcuit tRAcK 1.5M silVeR + DeAD enD

nPA/tRAcK/1.5M/BK PAcific 1-ciRcuit tRAcK 1.5M BlAcK + DeAD enD

nPA/tRAcK/2M/Wh PAcific 1-ciRcuit tRAcK 2M White + DeAD enD

nPA/tRAcK/2M/si PAcific 1-ciRcuit tRAcK 2M silVeR + DeAD enD

nPA/tRAcK/2M/BK PAcific 1-ciRcuit tRAcK2M BlAcK + DeAD enD

liVe enDs


nPA/liVe-enD/Wh PAcific liVe-enD White

nPA/liVe-enD/si PAcific liVe-enD silVeR

nPA/liVe-enD/BK PAcific liVe-enD BlAcK

stRAight connectoRs


nPA/stRAight/Wh PAcific stRAight connectoR White

nPA/stRAight/si PAcific stRAight connectoR silVeR

nPA/stRAight/BK PAcific stRAight connectoR BlAcK

90° connectoRs


nPA/90Deg/Wh PAcific Right Angle connectoR White

nPA/90Deg/si PAcific Right Angle connectoR silVeR

nPA/90Deg/BK PAcific Right Angle connectoR BlAcK

t connectoRs


nPA/t/Wh PAcific t connectoR White

nPA/t/si PAcific t connectoR silVeR

nPA/t/BK PAcific t connectoR BlAcK

4-WAY connectoRs


nPA/X/Wh PAcific 4-WAY connectoR White

nPA/X/si PAcific 4-WAY connectoR silVeR

nPA/X/BK PAcific 4-WAY connectoR BlAcK

susPension Kits


nPA/WiRe/susP/Kit/1.5M PAcific WiRe susPension Kit PAiR 1.5M

nPA/WiRe/susP/Kit/4M PAcific WiRe susPension Kit PAiR 4M

t connector

4-Way connector straight connector

live end90˚ connector

tRAcKsingle circuit mains voltage track, compatiblewith the san Diego and san francisco productranges. it is available in 3 lengths (1m, 1.5m and 2m)and 3 finishes (white, silver and black). each lengthis supplied complete with its end-cap (dead-end).live-ends are to be purchased separately.

tRAcK connectoRsA full range of track connectors is available,including straight joiners, t Pieces, right-anglesand 4-way connectors, all as illustrated above.

susPension Kitseach length of track is pre-drilled for direct fixingto a ceiling if required. Alternatively, a range ofsuspension kits is available.


SEATTLERecessed asymmetric wallwash fittings.


coated finish- hinged terminal access on rear

for easy installation- slots for lumafix brackets


SPECIFICATION- for t5 and Pll lamps- supplied excluding lamps- european brand enec

control gear- for 15-24mm exposed t and

some pull-up installations- semi-specular

asymmetric reflector

101

RETAIL

&DISPLAY

lig

ht

ing

www.nvcuk.com

|+44(0)121

457

6340

OPTIONS- Dimming. Add suffix 1-10, Dsi,

DA, sD or cf- Pull-up installations.

Packs of 4 lumafix bracketsavailable as separate items.

- LED versions.Please enquire for details.


nse124/t5 seAttle 1X24Wt5 Rec WAllWAsheR

nse155/Pll seAttle 1X55WPll Rec WAllWAsheR

nse255/Pll seAttle 2X55WPll Rec WAllWAsheR

AttAchMents


nBRKt/luMAfiX/PK4 luMAfiX BRAcKets - PAcK of 4


www.nvcuk.com

|+44(0)121

457

6340

RETAIL

&DISPLAY

lig

ht

ing

NEVADA LED102

linkable under-cabinet leD fittings.

CONSTRUCTION- Polycarbonate body- Acrylic (PMMA) diffuser giving

excellent diffusion of individualleDs and very even illumination

- supplied complete with 2m mainslead, butt-connector andmounting clips

- Mounting clips allow vertical orside mounting

- supplied in blister packdisplay packaging

OPTIONS- link leads available in 3 lengths,

ordered as separate items

each fitting suppliedcomplete with butt

connector

Male/femaleconnections for use

with link-leads orbutt connector

Mounting clip adaptable forvertical or side mounting


nnV2/leD/740 neVADA 2W leD linKlight 267MM






AccessoRies & sPARes


nnV/ll/250 neVADA 250MM linK leAD



nnV/sl/2000 neVADA 2000MM stARteR leAD

LENGTH A

42

22

Wattage Qty of Max No. of fittings (A) LengthLEDs per continuous run (mm)

2 30 20 2674 48 15 3438 96 15 60312 168 10 90317 168 8 120324 168 6 1503

APPLICATIONS- Retail shelf lighting- Kitchen cabinet lighting

SPECIFICATION- leDs- individually switched- linkable, subject to limits

- Directly butted end-to-endusing butt-connector(supplied), or

- using link-leads, ordered asseparate items


NEVADA T5linkable under-cabinet t5 fittings.

103

RETAIL

&DISPLAY

lig

ht

ing

www.nvcuk.com

|+44(0)121

457

6340

AccessoRies & sPARes





nnV/sl/2000 neVADA 2000MM stARteR leAD

Wattage Qty of Max No. of fittings (A) LengthLEDs per continuous run (mm)

2 30 20 2674 48 15 3438 96 15 60312 168 10 90317 168 8 120324 168 6 1503

Mounting clip adaptable forvertical or side mounting

each fitting suppliedcomplete with butt

connector

Male/femaleconnections for use

with link-leads orbutt connector

CONSTRUCTION- Polycarbonate bodysupplied complete with

2m mains lead, butt-connectorand mounting clips

- Mounting clips allow vertical orside mounting

- supplied in blister packdisplay packaging

OPTIONS- link leads available in 3 lengths,

ordered as separate items


nnV1X6/t5/840 neVADA 1X6Wt5 linKlight +lAMP

nnV1X8/t5/840 neVADA 1X8Wt5 linKlight +lAMP

nnV114/t5/840 neVADA 1X14Wt5 linKlight +lAMP




APPLICATIONS- Retail shelf lighting- Kitchen cabinet lighting

SPECIFICATION- for t5 lamps. supplied with

lamp fitted- individually switched- linkable, subject to limits

- Directly butted end-to-end usingbutt-connector (supplied),or

- using link-leads, ordered asseparate items

LENGTH A


www.nvcuk.com

|+44(0)121

457

6340

RETAIL

&DISPLAY

lig

ht

ing

104


SU

RFA

CE

&S

US

PE

ND

ED

LIG

HTI

NG

CO

NT

EN

TS

EMERGENCY

lig

ht

ing

co

nt

en

ts

BURLINGTONpage 106

WILMINGTONpage 107

KANSASpage 108

LEXINGTONpage 110

NEBRASKApage 111

SYRACUSEpage 112

NVC_EMERG.qxp:EMERGENCY 22/4/13 13:47

www.nvcuk

.com

|+44(0)121

457

634

0EMERGENCY

lig

ht

ing

BURLINGTON106

self-testing recessed leD exit sign with drop blade for3 hour maintained or non-maintained operation.


nBR/V2/leD/Wh/m3 BURlington V2 Rec'D leD em. DRoP light maint 3hR White

nBR/V2/leD/ch/m3 BURlington V2 Rec'D leD em. DRoP light maint 3hR chRome

nBR/V2/leD/sch/m3 BURlingtonV2Rec'DleDem.DRoPlightmaint3hRsatinchRome

nBR/V2/leD/BR/m3 BURlington V2 Rec'D leD em. DRoP light maint 3hR BRass

CONSTRUCTION- Robust steel body- choice of finishes- supplied complete with

arrow-up (ahead) legend- nicd cells

APPLICATIONS- corridors, exits and

escape routes

SPECIFICATION- leD light source up to

60,000 hours life- acrylic blade with legend

visible from both sides at 32m

OPTIONS- Legends. alternative legends

available as listed, to be orderedas separate items.

- Mode. can be installed inm3 or nm3 mode.Detailed instructions included.

- Finish. available in white (Wh),chrome (ch), brass (BR) andsatin chrome (sch) as listed.

attachments


nBR/V2/le/UP BURlington V2 legenD UP

nBR/V2/le/lR BURlington V2 legenD leFt + Right

nBR/V2/le/Dn BURlington V2 legenD DoWn


WILMINGTONself-testing leD exit sign with drop blade for 3 hour maintained

or non-maintained operation.


nWi/V2/leD/Wh/m3 Wilmington V2 leD em. DRoP light maint 3hR White

nWi/V2/leD/ch/m3 Wilmington V2 leD em. DRoP light maint 3hR chRome

nWi/V2/leD/BR/m3 Wilmington V2 leD em. DRoP light maint 3hR BRass

nWi/V2/leD/sch/m3 Wilmington V2 leD em. DRoP light maint 3hR s.chRome

107

EMERGENCY

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0

attachments


nWi/V2/le/UP Wilmington V2 legenD UP

nWi/V2/le/lR Wilmington V2 legenD leFt + Right

nWi/V2/le/Dn Wilmington V2 legenD DoWn

nWi/WmB/Wh Wilmington Wall moUnting BRacKet White

nWi/cPB/Wh Wilmington ceiling Pole BRacKet White

CONSTRUCTION- extruded aluminium body- choice of finishes- Robust steel ceiling

mounting bracket- supplied complete with welded

steel suspension chains andarrow-up legend

- nicd cells

OPTIONS- Legends. alternative legends

available, to be ordered asseparate items.

- Mode. can be installed inm3 or nm3 mode.Detailed instructions included.

- Finish. available in white(as listed) or chrome (ch),brass (BR), or satin chrome (sch).add suffix as required.

- Mounting. 2 alternativemounting kits offered, order asseparate items.- Wall mounting bracket- ceiling pole bracket

APPLICATIONS- corridors, exits and escape routes

SPECIFICATION- leD light source up to

60,000 hours life- acrylic blade with legend visible

from both sides at 36m

nWi/cPB/WhWilmington with

ceiling pole bracket

nWi/WmB/WhWilmington with

wall mounting bracket


www.nvcuk

.com

|+44(0)121

457

634

0EMERGENCY

lig

ht

ing

KANSAS IP65108

leD iP65 twinspot luminaires with a choice of features.

2 x 3W LED

2 x 10W LED

SPECIFICATION 2 x 3W- 340lm- sealed lead-acid, 6V, 7ah- manual and auto-test functions- Visual indicator leD and audible

(buzzer) indication of fitting status- suitable for head-up

installation only

APPLICATIONS- corridors- Warehouses- industrial premises

CONSTRUCTION- aBs iP65 body- Polycarbonate leD heads- suitable for 0˚ - +40˚c operation.

For cold store operation, selectremote-head (x2) and batterypack as listed below

SPECIFICATION 2 x 10W- 370lm- nicd cells, 12V, 2.2ah- manual test only- suitable for installation in

any orientation- 2.8kg

FoR 0 - +40˚c oPeRation


nKs2X3/leD/iP65/nm3 Kansas tWinsPot iP65 2X3W leD non-maintaineD 3hRs

nKs210/leD/iP65/nm3 Kansas tWinsPot iP65 2X10W leD non-maintaineD 3hRs

FoR colD stoRe oPeRation


nKs/10/leD/Remote-heaD Kansas leD RemoPte-heaD onlY – single

nKs210/leD/Bat-PacK/iP65 Kansas PoWeR PacK iP65

2 x 10W2 x 3W


KANSAS IP20traditional twin-spot non-maintained luminaire.

SPECIFICATION- 2 x 20W incandescent

halogen lamps- 3 hours operation on battery

power after mains failure- “lamps oK” and “charge” indicator- sealed lead-acid battery


nKs220/nm3 Kansas tWinsPot 2X20W non-maintaineD 3hRs + lamPs

nKs/heaD Kansas tWinsPot sPaRe heaD

nlamP/20/nKs Kansas tWinsPot sPaRe lamP

70

306

110

305

109

EMERGENCY

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0


gloss powder coated finish- suitable for mounting with lamp

heads uppermost, as shown

APPLICATIONS- corridors- Warehouses- industrial premises


www.nvcuk

.com

|+44(0)121

457

634

0EMERGENCY

lig

ht

ing

LEXINGTON110

leD and 8W fluorescent exit box in 3 hour maintainedand non-maintained versions.


nle1X8/m3/834 leXington eXit BoX 8W maint 3hR legenD+lamP

nle1X8/nm3/834 leXington eXit BoX 8W n.maint 3hR legenD+lamP

nle/3/leD/m3 leXington eXit BoX 3W leD maint 3hR legenD

SPECIFICATION- 1 x 8W t5 lamp or leD- supplied with col 834 lamp- 3 hours operation on battery

power after mains power failure- maintained and

non-maintained versions- test button and indicator fitted- 30m viewing difference

APPLICATIONS- corridors- exits- escape routes

CONSTRUCTION- Robust steel body- White gloss powder coated finish- Polycarbonate legend panel- supplied complete with

arrow-down legend as shown

OPTIONS- alternative legends available as

listed - to be ordered as separateitems. For “man running throughdoor”, order as V2, as listed below.

attachments


nle/le/UP leXington legenD UP

nle/le/leFt leXington legenD leFt

nle/le/Right leXington legenD Right

nle/V2/le/UP leXington V2 legenD UP (aheaD)

nle/V2/le/DoWn leXington V2 legenD DoWn

nle/V2/le/leFt leXington V2 legenD leFt

nle/V2/le/Right leXington V2 legenD Right

V2 legend“man running through door”


NEBRASKAiP65 emergency bulkhead with a choice

of 8W fluorescent or 2W leD light sources.

CONSTRUCTION- Polycarbonate base and cover- steel gear tray- supplied excluding legends.

2 legend packs available, as listed.For “man running through door”order V2 legend pack.

APPLICATIONS- corridors, exits and escape routes

SPECIFICATION- 3 hours operation on battery power

after mains power failure- Fluorescent version supplied

complete with colour 834 lamp


nne1X8/m3/834 neBRasKa 1X8W t5 iP65 maint 3hR +lamP

nne1X8/nm3/834 neBRasKa 1X8W t5 iP65 n.maint 3hR +lamP

nne/2/leD/m3 neBRasKa 2W leD iP65 maint 3hR

352 117

76

111

EMERGENCY

lig

ht

ing

www.nvcuk

.com

|+44(0)121

457

634

0

OPTIONS- semi-recessed mounting kit

available. cut-out 365 x 120.order as separate item.

- spare legends available.- m3 variants may be installed as

nm3 if required. Detailedwiring diagram includedwith instructions.

attachments


nneleP4 neBRasKa legenD PacK oF UP DoWn leFt Right

nne/V2/leP4 neBRasKa V2 legenD PacK oF UP DoWn leFt Right

nne/RmK neBRasKa RecesseD moUnting Kit

nebraska1 x 8W t5

nebraskaleD

nne/V2/leP4.man runningthrough door

nebraska recessedmounting kit

nneleP4.man runningtowards door


www.nvcuk

.com

|+44(0)121

457

634

0EMERGENCY

lig

ht

ing

SYRACUSE112

self contained, non-maintained leD emergency fitting.a cost effective, versatile and energy efficient alternativeto m3 operation in recessed modular fittings andstand-alone bulkheads.

syracuse 3W

syracuse 5W


nsY3/leD/nm3 sYRacUse 3W leD non-maintaineD DoWnlight

nsY5/leD/nm3 sYRacUse 5W leD non-maintaineD DoWnlight

nsY3/leD/Wh/nm3 sYRacUse 3W leD non-maint DoWnlight White BeZel

nsY5/leD/Wh/nm3 sYRacUse 5W leD non-maint DoWnlight White BeZel

3W = Ø70 5W = Ø78

3W=

325W

=55

188

Ø41

Ø41

188

Ø62 CUTOUT

SPECIFICATION- 3 hours operation on battery power

after mains power failure- non-maintained operation- 3W - 3.6V, 3ah- 5W - 3.6V, 4.5ah- nimh cells- For recessed installation

APPLICATIONS- corridors- offices- hotels, entertainment

and leisure

CONSTRUCTION- Battery pack and driver in

separate cylindrical cases- supplied with clips for recessed

mounting fitted

OPTIONS- supplied with silver bezel

as standard. For white bezel usesuffix Wh.


SU

RFA

CE

&S

US

PE

ND

ED

LIG

HTI

NG

CO

NT

EN

TS

BATT

ENS

ra

ng

ec

on

te

nt

s

PHOENIX T5page 114

PHOENIX T8page 115

PHOENIX WITHCONTROLLER

page 116

PHOENIX SENSORSpage 117

FAIRFAXpage 118

FAIRFAXCONNECTORS

page 119



NVC_BATTENS.qxp:BATTENS 22/4/13 13:50

www.nvcuk

.com

|+44(0)121

457

634

0BATT

ENS

ra

ng

e

PHOENIX T5114

t5 batten fittings with a body the same width asconventional t12 and t8 battens, making them idealenergy efficient replacements for older fittings.

60035W/49W/80W 1475

60028W/54W 1175

B41757514W/24W

SIZE A

A

7873

6161

B

TWINSINGLE

PHoenIX t5 HF

orDer coDe DescrIPtIon

nPH114/t5/840 PHoenIX 1X14Wt5 + LaMP














CONSTRUCTION- robust steel body- White gloss powder coat finish- Polycarbonate end caps

APPLICATIONS- garages and workshops- store rooms- corridors and circulation areas

SPECIFICATION- t5. supplied with leading

brand colour 840 lamps- Leading brand enec

control gear


available, add suffix M3.not available with 14W and 24W.2x 80W only suitable to ta = 22˚c,and not suitable for use with controller.

- Dimming. add suffix 1-10, DsI, Da,sD or cF.

- Attachments. Full range available.see page 120


PHOENIX T8t8 batten fittings with a choice of high-frequency (HF)

or magnetic (switch start) control gear in single andtwin lamp versions.

115

BATT

ENS

ra

ng

ewww.nvcuk

.com

|+44(0)121

457

634

0

86

101

A

82

61

B

41761718W600122736W600152758W600179170W

SINGLE TWIN

BSIZE A

PHoenIX t8 HF


nPH118/HF/840 PHoenIX 1X18Wt8 HF + LaMP








PHoenIX t8 sWItcH start


nPH118/840 PHoenIX 1X18Wt8 + LaMP








SPECIFICATION- t8. supplied with leading brand

colour 840 lamps- HF versions with leading brand

enec control gear- switch start versions with power

factor correction

APPLICATIONS- garages and workshops- store rooms- corridors and circulation areas

CONSTRUCTION- robust steel body- White gloss powder coat finish- Polycarbonate end caps


available, add suffix M3.not available with 18W.

- Dimming. add suffix 1-10, DsI,Da, sD or cF.

- Attachments. Full rangeavailable. see page 121


www.nvcuk

.com

|+44(0)121

457

634

0BATT

ENS

ra

ng

e

PHOENIX WITH CONTROLLER116

t5 batten fittings complete with lamps and polycarbonatecontroller in an attractive point-of-sale carton.

the controller is made from polycarbonate, so it can withstandrough treatment with no risk of cracking or shattering.

the controller is ribbed on the inside for good looks and glarecontrol. on the outside it is smooth, giving a wipe-clean finish.

PHoenIX t5 HF


nPH128/t5/cntr/840 PHoenIX 1X28Wt5 + controLLer + LaMP




SPECIFICATION- t5. supplied with leading brand

colour 840 lamps- Leading brand enec control gear

APPLICATIONS- garages and workshops- Kitchens- corridors and circulation areas

CONSTRUCTION- robust steel body- White gloss powder coat finish- Polycarbonate end caps- Polycarbonate controller

A

B

96

78SINGLE/TWIN

A1182

SIZE28W 600

B A1482

SIZE35W 600

B

SAVE MONEY & HELP SAVE THE PLANET

replacing old t12 and t8 magnetic fittings with PHoenIX t5 is an easy way to save money

EXAMPLE 1:

oLD 4' (36W) t8 Batten with MagnetIc gearx 1 Lamp - 43W, 67 Kg pa co2x 2 Lamps - 86W, 134 Kg pa co2

neW 4' (28W) t5 Batten with HF gearx 1 Lamp - 30W, 47 Kg pa co2x 2 Lamps - 60W, 94 Kg pa co2

SAVE 30%

EXAMPLE 2:

oLD 5' (58W) t8 Batten with MagnetIc gearx 1 Lamp - 67W,105 Kg pa co2x 2 Lamps - 134W, 210 Kg pa co2

neW 5' (35W) t5 Batten with HF gearx 1 Lamp - 38W, 60 Kg pa co2x 2 Lamps - 75W, 118 Kg pa co2

SAVE 40%


PHOENIX SENSORSPassive infra-red (PIr) sensors are available as pre-wired kits to be added to

PHoenIX battens by the installer on site. these are a simple way to deliver bigenergy savings and reduced installation costs.

117

BATT

ENS

ra

ng

ewww.nvcuk

.com

|+44(0)121

457

634

0


n/PIr/MsB1000t Batten MoUnt PIr eo

n/PIr/MsB1000Pt Batten MoUnt PIr eo LUX & tIMe aDJUst

n/PIr/MsB1000DaLIt Batten MoUnt PIr eo DaLI

nHs/HP18 HanDset For eX-or sensors

Detection pattern


nPH/cntr/sIngLe/FIX-KIt PHoenIX t5 & sIngLe t8 controLLer enD caPs & BracKets

nPH/cntr/tWIn/FIX-KIt PHoenIX tWIn t8 controLLer enD caPs & BracKets

ntB/4/2X2.5/WIreD terMInaL BLocK For 2 X 2.5MM Pre-WIreD

PHOENIX SPARES

3 sensor kits are available:

N/PIR/MSB1000Tthis provides on/off functionality in response tooccupancy. there is no lux threshold for switching onand the time-out is set to 20 minutes. 2a rated.

N/PIR/MSB1000PTon/off functionality as above, but with an adjustablelux threshold and time-out. 2a rated.

N/PIR/MSB1000DALITFully adjustable, and with a DaLI output for use inconjunction with DaLI control gear inside the fitting.the available features include maintained light level,whereby the light output of the fitting being controlledis adjusted as the natural light level changes. If this isrequired the fittings with which the sensor is to beused must be ordered with Da in the order code.

to adjust these for optimal operation a hand-heldprogrammer may be required.

a simple alternative is to install fittings that switchon at 100% when presence is detected and dim to10% when nobody is present. this can be achievedwith an on/off sensor combined with fittings orderedwith cF in their order code.

nHs/HP18hand-held programmer


www.nvcuk

.com

|+44(0)121

457

634

0BATT

ENS

ra

ng

e

FAIRFAX118

t5 battens with male/female connectors at each endand a complete range of interconnecting leads.


nFX128/t5/4P/840 FaIrFaX 1X28Wt5 LInKaBLe 4-PoLe-WHIte gst15i4 +LaMP










CONSTRUCTION- robust steel body with

white gloss powder coated finish- Polycarbonate end caps- through wired with 1.5mm2

Ls0H conductors

APPLICATIONS- Large industrial and

retail projects- Walkways in stations

and airports- cove lighting

SPECIFICATION- t5, single or twin lamp.

supplied with leading brandcolour 840 lamps

- Leading brand eneccontrol gear

- Fitted with Wieland gst15iconnector system- 16a rated- 4-pole as standard,

including M3 versions- 5-pole for dimming versions


add suffix M3. 2 x 80W M3ta = 22˚c, and not suitable for usewith controller.

- Dimming. switch-dim and corridorfunction (add suffixes sD or cF asrequired) available with all variants.DsI, DaLI and 1-10v dimmingavailable on standard versions only(not M3). all dimming versionsare 5 pole.

- Attachments. Full range available.see page 121.

SIZE A B

14W/24W28W/54W

35W/49W/80W

57911791479

417600600

B

A 61SINGLE

61TWIN

73 78


FAIRFAX CONNECTORSa full range of connectors, extender and starter leads is available.

all flex is low smoke zero halogen (LsoH), and all conductors are 1.5mm.

take care when ordering to check if 4-pole or 5-pole wiring is required,seeking advice from nVc if required.

BUTT CONNECTORSto join fittings closely together,4 and 5-pole butt connectorsare available. each butt connectorhas a male and female end.


nFX/4/Bc/W FaIrFaX 4-PoLe BUtt connector gst15i4 WHIte

nFX/5/Bc/W FaIrFaX 5-PoLe BUtt connector gst15i5 WHIte

119

BATT

ENS

ra

ng

ewww.nvcuk

.com

|+44(0)121

457

634

0

EXTENDER LEADSFor connecting between fittings extender leadsare available in 1m and 3m lengths, all with a maleconnector at one end and a female on the other.


nFX/4/1M/MF/W FaIrFaX LsoH 4-PoLe 1M MaLe-Free gst15i4 WHIte




STARTER LEADSFor connecting the first fitting in a row to a junctionbox or distribution board. a starter lead comprises3m of flex with a female connector and free ends.


nFX/4/3M/FFe/W FaIrFaX LsoH 4-PoLe 3M FeMaLe-Free enD gst15i4 WHIte

nFX/5/3M/FFe/W FaIrFaX LsoH 5-PoLe 3M FeMaLe-Free enD gst15i5 WHIte


www.nvcuk

.com

|+44(0)121

457

634

0BATT

ENS

ra

ng

e

PHOENIX & FAIRFAX T5ATTACHMENTS

120

all attachments for the t5 battens are supplied as separate items.

Controller: Made from Polycarbonate the controller is shatter proof and virtually indestructible.the smooth exterior gives an easily cleaned surface while the ribbed interior gives an attractiveappearance and good glare control.


controLLers

nPH/cntr/14-24 PHoenIX controLLer 14-24W



PHoenIX - t5 WItHcontroLLer attacHMent

96

78SINGLE/TWIN


steeL reFLectors

nPH/reFL/14-24/st PHoenIX reFLector steeL 14-24W



PHoenIX - t5 WItH steeLreFLector attacHMent

SINGLE TWIN166

91 91

166


asYMMetrIc steeL reFLectors

nPH/reFL/14-24/st/asYM PHoenIX reFLector steeL asYMMetrIc 14-24W



PHoenIX - t5 WItH asYMMetrIcsteeL reFLector attacHMent

TWINSINGLE

99

100

99

100


aLUMInIUM reFLectors

nPH/reFL/14-24/aL PHoenIX reFLector aLU 14-24W



PHoenIX - t5 WItH aLUMInIUMreFLector attacHMent

TWINSINGLE190190

98 98

Steel reflector: Made from steel with white gloss powder coated finish. slots in the top of the reflectorprovide some upward light distribution for an improved lighting effect.


WIre gUarD

nPH/Wg/14-24 PHoenIX WIre gUarD 14-24W



PHoenIX - t5 WItH WIre gUarD

Wire guard: Made from zinc coated steel mesh. secures to steel reflector with fixing kit supplied.

Asymmetric steel reflector: Made from steel with white gloss powder coated finish. the asymmetricprofile provides directional lighting and is ideal for wall washing.

Aluminium reflector: Made from aluminium with a polished specular finish. Ideal for warehouseswith racking aisles and other applications where maximum efficiency is required.


PHOENIX T8ATTACHMENTS

all attachments for the t8 battens are supplied as separate items.

121

BATT

ENS

ra

ng

ewww.nvcuk

.com

|+44(0)121

457

634

0

Controller: Made from Polycarbonate the controller is shatter proof and virtually indestructible.the smooth exterior gives an easily cleaned surface while the ribbed interior gives an attractiveappearance and good glare control.


controLLers

nPH/cntr/118 PHoenIX controLLer 1X18W








PHoenIX - t8 WItHcontroLLer attacHMent

SINGLE78

96

118

98

TWIN


steeL reFLectors

nPH/reFL/18/st PHoenIX reFLector steeL 18W




PHoenIX - t8 WItH steeLreFLector attacHMent

TWINSINGLE166166

91 91


asYMMetrIc steeL reFLectors

nPH/reFL/18/st/asYM PHoenIX reFLector steeL asYMMetrIc 18W




PHoenIX - t8 WItH asYMMetrIcsteeL reFLector attacHMent

SINGLE TWIN

99

100 120

99


aLUMInIUM reFLectors

nPH/reFL/18/aL PHoenIX reFLector aLU 18W




PHoenIX - t8 WItH aLUMInIUMreFLector attacHMent

9898

190 190SINGLE TWIN

Steel reflector: Made from steel with white gloss powder coated finish. slots in the top of the reflectorprovide some upward light distribution for an improved lighting effect.


WIre gUarD

nPH/Wg/18 PHoenIX WIre gUarD 18W




PHoenIX - t8 WItH WIre gUarD

Wire guard: Made from zinc coated steel mesh. secures to steel reflector with fixing kit supplied.

Asymmetric steel reflector: Made from steel with white gloss powder coated finish. the asymmetricprofile provides directional lighting and is ideal for wall washing.

Aluminium reflector: Made from aluminium with a polished specular finish. Ideal for warehouseswith racking aisles and other applications where maximum efficiency is required.


www.nvcuk

.com

|+44(0)121

457

634

0BATT

ENS

ra

ng

e122


SU

RFA

CE

&S

US

PE

ND

ED

LIG

HTI

NG

CO

NT

EN

TS

SECURE

lig

ht

ing

co

nt

en

ts

HOLLOWAYpage 124

WORMWOODpage 125

GLENOCHILpage 126

SHOTTSpage 127

FORDpage 128

BELMARSHpage 129

DARTMOORpage 130

DEERBOLTpage 131

A range of fittings for use where ahigh level of vandal resistance and/oranti-ligature features are required.

NVC_SECURE.qxp:SECURE 22/4/13 13:52

www.nvcuk.com

|+44(0)121

457

6340

SECURE

lig

ht

ing

HOLLOWAY124

Anti-ligature surface fitting for 1 or 2 t5 lamps.


nhl114/t5 holloWAY 1 X 14W t5 iP65 sURF Anti lig.










CONSTRUCTION- All welded steel construction

with white powder coatedtextured finish

- Polycarbonate controller/diffuserretained in steel gasketted bezel,secured with torx security screws

APPLICATIONS- Prisons, police stations and

detention centres- Psychiatric hospitals- schools and public buildings



control gear- clear prismatic controller or

opal diffuser- iK10++ rated- Anti-ligature, when

installed correctly




- Sensors. Available withmicro-wave occupancy sensorfitted internally. Add suffix MW.

- Controller/diffuser. supplied withclear prismatic controller as listed.For opal diffuser add suffix o.

- LED. leD variants available.Please enquire for details.


WORMWOODAnti-ligature cornice fitting for 1 or 2 t5 lamps.


with white powder coatedtextured finish


- two body styles - standard and slim


detention centres- Psychiatric hospitals- schools and public buildings



control gear- clear prismatic controller or

opal diffuser- iK10++ rated- Anti-ligature, when

installed correctly

STANDARD

SLIM

125

SECURE

lig

ht

ing

www.nvcuk.com

|+44(0)121

457

6340





- Controller/diffuser. suppliedwith clear prismatic controlleras listed. For opal diffuseradd suffix o.

- Body size. choice of standard,as listed or for slim, add suffix sl.



nWo114/t5 WoRMWooD 1 X 14W t5 iP65 coRnice Anti lig.











www.nvcuk.com

|+44(0)121

457

6340

SECURE

lig

ht

ing

GLENOCHIL126

Vandal resistant surface fitting for 1 or 2 t5 lamps.

CONSTRUCTION- steel body with die-cast

aluminium end caps securedwith stainless steel securityscrews, all white powder coatfinished to RAl 9016

- Polycarbonate controller heldcaptive by end caps and securedalong its entire length

APPLICATIONS- Medium security areas- car parks- schools and public buildings



control gear- clear prismatic controller- iK10++ rated





- IP Rating. iP44 as standard.For iP54 add suffix iP54.



ngo114/t5 glenochil 1 X 14W t5 iP44 sURF Die/c enDcAP Pc contR











SHOTTSVandal resistant cornice fittings for 1 or 2 t5 lamps.

CONSTRUCTION- steel body with die-cast

aluminium end caps securedwith stainless steel securityscrews, all white powder coatfinished to RAl 9016

- Polycarbonate controller heldcaptive by end caps and securedalong its entire length

APPLICATIONS- Medium security areas- car parks- schools and public buildings



control gear- clear prismatic controller- iK10++ rated


nsh114/t5 shotts 1 X 14W t5 coRnice Die-cAst enD cAPs Pc contR.










127

SECURE

lig

ht

ing

www.nvcuk.com

|+44(0)121

457

6340

OPTIONS- Emergency. Maintained

3 hours available on allvariants. Add suffix M3.





www.nvcuk.com

|+44(0)121

457

6340

SECURE

lig

ht

ing

FORD128

Vandal resistant surface fittings with louvre for 1 or 2 t5 lamps.


nFD128/t5 FoRD 1 X 28W t5 sURF secURe BZ loUVRe + Pc coVeR










control gear- Aluminium low-brightness louvre

behind clear polycarbonate cover

CONSTRUCTION- White powder coated steel body

with moulded plastic end caps- Polycarbonate cover retained by

a steel bezel, secured withsecurity screws




APPLICATIONS- Medium security areas

including prison associationareas and canteens

- corridors, classroomsand offices


BELMARSHAnti-ligature surface or

recessed fitting for 1 or 2 T5 lamps.

ORDER CODE DESCRIPTION

NBS114/T5/CL BELMARSh 1 X 14W T5 IP65 SURF ANTI LIg. CLEAR PANEL










RECESSED

SURFACE

129

SECURE

LIg

hT

INg

www.nvcuk.com

|+44(0)121

457

634

0


with white powdercoated textured finish


- Available for surface orrecessed installations.


public buildings- Bus stations and bus shelters

SPECIFICATION- For T5 lamps.

Supplied excluding lamps- Leading brand ENEC control gear- Choice of 3 covers;

clear, clear prismatic or opal- IK10++ rated- Anti-ligature, when installed correctly



- Dimming. Add suffix 1-10, DSI,DA, SD or CF as required.


- Covers. Supplied with clear coveras shown and listed. For Prismaticor opal cover add suffix P or Oas required.

- Installation. Supplied for surfaceinstallation as standard. Forrecessed installation add suffix R.

- LED. LED variants available.Please enquire for details.


www.nvcuk.com

|+44(0)121

457

6340

SECURE

lig

ht

ing

DARTMOOR130

Anti-ligature surface mounted fittings forcompact fluorescent lamps.

SMALL LARGE


nDMs28/2D/hF DARtMooR sMAll 28W2D hF iP44 Anti lig. PRis DiFF

nDMs38/2D/hF DARtMooR sMAll 38W2D hF iP44 Anti lig. PRis DiFF

nDMs226/Pl/hF DARtMooR sMAll 2X26Pl hF iP44 Anti lig. PRis DiFF

nDMl28/2D/hF DARtMooR lARge 28W2D hF iP44 Anti lig. PRis DiFF

nDMl38/2D/hF DARtMooR lARge 38W2D hF iP44 Anti lig. PRis DiFF

nDMl226/Pl/hF DARtMooR lARge 2X26Pl hF iP44 Anti lig. PRis DiFF

nDMl55/t5c DARtMooR lARge 55Wt5c iP44 Anti lig. PRis DiFF

CONSTRUCTION- spun aluminium base with white

powder coated finish- Polycarbonate controller/diffuser

held in place with stainless steelsecurity screws

- two body sizes- small (410mm) for 28W,

38W, and 2x26W- large (520mm) for 28W,

38W, 2x26W and 55W t5c





- Controller/diffuser. supplied withclear prismatic controller as listed.For opal diffuser add suffix o.

- IP65. Available with gasket fittedto raise rating to iP65.Add suffix iP65


APPLICATIONS- Prisons, police stations

and public buildings- toilets and corridors

SPECIFICATION- For compact fluorescent lamps.


control gear- clear prismatic or opal diffuser- iK10++ rated- Anti-ligature, when installed

correctly


DEERBOLTAnti-ligature recessed fittings for

compact fluorescent lamps.

PL 2D

131

SECURE

lig

ht

ing

www.nvcuk.com

|+44(0)121

457

6340

Deerbolt 28W 2D with dish diffuser


nDB226/Pl/hF DeeRBolt 2X26Pl hF iP44 Anti lig. FlAt PRis DiFF

nDB28/2D/hF DeeRBolt 28W2D hF iP44 Anti lig. FlAt PRis DiFF

nDB38/2D/hF DeeRBolt 38W2D hF iP44 Anti lig. FlAt PRis DiFF

nDB226/Pl/hF/iP65 DeeRBolt 2X26Pl hF iP65 Anti lig. FlAt PRis DiFF

nDB28/2D/hF/iP65 DeeRBolt 28W2D hF iP65 Anti lig. FlAt PRis DiFF

nDB38/2D/hF/iP65 DeeRBolt 38W2D hF iP65 Anti lig. FlAt PRis DiFF




- Controller/diffuser. All controllers/diffusers are polycarbonate.supplied as standard with flatclear prismatic controller.For alternatives:- Plain clear panel, add suffix cl.- Dished prismatic controller,

add suffix P (2D versions only)- Dished opal diffuser, suffix o

(2D versions only)


public buildings- toilets and corridors

SPECIFICATION- For compact fluorescent lamps.

supplied excluding lamps- leading brand enec control gear- Range of clear, prismatic or opal

polycarbonate controllers/diffusers- iK10++ rated- Anti-ligature, when installed

correctly against a ceiling

CONSTRUCTION- spun aluminium base with white

powder coated finish- Polycarbonate controller/diffuser,

held in place with stainless steelsecurity screws.

- IP65. Available with gasketfitted to raise rating to iP65.Add suffix iP65.



www.nvcuk.com

|+44(0)121

457

6340

SECURE

lig

ht

ing

132


SU

RFA

CE

&S

US

PE

ND

ED

LIG

HTI

NG

CO

NT

EN

TS

INDUST

RIA

Ll

igh

tin

gc

on

te

nt

s

OREGON LEDpage 145

OREGON T5page 146

OREGON T5 SLIMpage 147

OREGON PLLpage 148

OREGON SENSOROPTIONSpage 149

OREGON SENSORCOMMISSIONING

page 150

VENETApage 151

REDMONDpage 152

EUGENEpage 153

KELSOpage 154

TIOGApage 155

NON-CORROSIVEFITTINGSpage 134

ALASKA V2 T5page 135

ALASKA V2 T5MICRO-WAVE

page 136

VALDEZpage 137

GREENLANDpage 138

ALASKA T8page 139

ALASKA 110page 140

PITTSBURGHpage 141

NON-CORROSIVEACCESSORIES

page 142

NON-CORROSIVESENSORSpage 143

ATLANTApage 144

NVC_INDUST.qxp:INDUSTRIAL 22/4/13 13:56

ww

w.n

vcuk

.com

|+44

(0)1

21457

634

0IN

DUST

RIA

Ll

igh

tin

g

NON-CORROSIVE FITTINGS

BENEFITS OF ALASKA v2

134

our non-corrosive offering is now comprised of 3 styles of fittings in 7 ranges.

ALASKA v2AlAsKA v2 is thelatest, improved, version ofthe popular AlAsKA range

of non-corrosive fittings.it includes many new

features, all designed to makethe range easier to install, longer

lasting and more versatile.

TOUGH CONSTRUCTION- Polycarbonate base- Polycarbonate cover- Polycarbonate clips.

Polycarbonate is the best material forgeneral purpose use. covers and clips areavailable as spares.

EASY TO INSTALL

Hinged covers

- Remain attached tothe body when opened.

- easy installationand maintenance

Reinforced drill-pointsin base

- no more crackedbodies when drillingthrough the base ofthe fitting

CLEAN LINESBecause the clips close flushwith the outside of the fitting there isless scope for dust and dirt to accumulate.

STYLE LIGHT SOURCE BODY COVER CLIPS SENSOR USE PAGE

RAnge

T5

T5 MW

VALDEZ

GREENLAND

T8

110V

leD t5 t8 Pc ABs ss Pc glAss Pc ss MW

PITTSBURGH

intermittentoccupancy

general

chemicalresistant

energyefficient

construction

specialist

136

135

137

138

139

140

141

o/r

o/r

n/a

n/a

n/a

ALASKA V2

ALASKA

PITTSBURGH

Pc = Polycarbonate ABs = Acrylonitrile Butadiene styrene ss = stainless steel MW = Micro-wave sensor n/a = not available o/r = on request


ALASKA v2 T5Polycarbonate iP65 fittings for t5 lamps.


available in all variants except14W and 80W. Add suffix M3.

- Dimming. Available in allversions. Add suffix 1-10, Dsi,DA, sD or cF.


nAK/V2/114/t5 AlAsKA V2 1X14Wt5 non-coR Pc BoDY cntR & cliPs











135

INDUST

RIA

Ll

igh

tin

gw

ww.n

vcuk

.com

|+44

(0)1

21457

634

0

- Stainless-steel clips.Available to be ordered asseparate items, as pictured.

- LED tubes. Available pre-wiredfor Philips Master leD tubes.Please contact us for details.

- Extreme temperature.For extreme temperature addsuffix Xt. check availabilitybefore ordering.

APPLICATIONS- industry, garages, workshops

and changing rooms- suitable for temperatures to -25˚c


excluding lamps- leading brand enec control gear

CONSTRUCTION- Polycarbonate base, controller

and clips for maximum strength- hinged cover- steel gear tray

nAK/V2/cliP/ss


ww

w.n

vcuk

.com

|+44

(0)1

21457

634

0IN

DUST

RIA

Ll

igh

tin

g

ALASKA v2 T5 MICRO-WAVE136

Polycarbonate iP65 fittings for t5 lamps completewith micro-wave sensor.


nAK/V2/128/t5/MW AlAsKA V2 1X28Wt5 non-coR Pc BoDY cntR & cliPs +MW









CONSTRUCTION- Polycarbonate base, controller

and clips for maximum strength- hinged cover- steel gear tray

APPLICATIONS- intermittent occupancy areas



control gear- Micro-wave occupancy sensor

fitted to gear tray with adjustable:- time delay (up to 30 minutes)- lux threshold- sensitivity (range)


available in all variants except 80W.Add suffix M3.

- Dimming. Fixed output asstandard. Add suffix cF for dimto 10% when presence is nolonger detected.

- Stainless-steel clips.Available to be ordered asseparate items. see page 142.

Micro-wave presencedetector fitted to gear tray

ALASKA T5 with micro-wave sensor is ideal for use in multi-storey car parks and other areas with intermittent occupancy. notethat lamp life will be reduced if switched on and off very frequently, so we recommend the use of the cF version where practical.

With cF, when presence is detected the luminaire will switch on at 100% output. When presence is no longer detected thefitting will drop down to 10% output after the (adjustable) time delay has elapsed.


VALDEZABs and polycarbonate iP65 fittings for

t5 lamps with stainless steel clips.

CONSTRUCTION- ABs base- Polycarbonate cover- grade 316 stainless steel clips- steel gear tray

APPLICATIONS- Areas with some risk of chemical

attack where ABs and stainlesssteel provide better resistancethan polycarbonate

- suitable for temperaturesto -25˚c


supplied excluding lamps- leading brand enec control gear

137

INDUST

RIA

Ll

igh

tin

gw

ww.n

vcuk

.com

|+44

(0)1

21457

634

0


available in all variants except14W and 80W. Add suffix M3.

- Dimming. Available in allversions. Add suffix 1-10, Dsi,DA, sD or cF

- Sensor. Available withmicro-wave sensor fitted.Add suffix MW.


nVZ114/t5 VAlDeZ 1X14Wt5 non-coR ABs BoDY Pc cntR ss cliPs












ngn2600/leD/1/750 gReenlAnD 2600 lUMen leD single 4Ft col750

ngn4000/leD/1/750 gReenlAnD 4000 lUMen leD single 5Ft col750

ngn5000/leD/2/750 gReenlAnD 5000 lUMen leD tWin 4Ft col750

ngn7900/leD/2/750 gReenlAnD 7900 lUMen leD tWin 5Ft col750

ww

w.n

vcuk

.com

|+44

(0)1

21457

634

0IN

DUST

RIA

Ll

igh

tin

g

GREENLAND138

Polycarbonate iP65 fittings with leDs andstainless steel clips, delivering class-leading performance.

Up to 59% more efficient than equivalent T5 fittings.

APPLICATIONS- industry, garages and workshops- suitable for applications to -30˚c

SPECIFICATION- leDs on metal-core PcB- two sizes. 4’ (1260), 5’ (1560)- each size available with single or twin row of leDs- cRi .7. 5,000K- 99 l.lm/cW

CONSTRUCTION- Polycarbonate base and hinged cover- Reinforced drill points on rear of fitting- grade 316 stainless steel clips- steel gear tray

OPTIONS- Emergency. Maintained 3 hours available in all versions.

Add suffix M3.- Dimming. DAli dimming available. Add suffix DA.- Sensor. Please check availability before ordering.

BeneFits oF leD v t5

Power (W) Luminaire lumens Lum. Lm/cW4’ t5 1 x 28W 30 2,112 70

4’ leD 2600 24 2,505 104

BENEFITS 20% 19% 48%less power more light more efficient

4’ t5 2 x 28W 60 4,066 68

4’ leD 4900 46 4,936 107


5’ t5 1 x 49W 53 3,332 63

5’ leD 3900 41 3,915 95


5’ t5 2 x 49W 104 6,414 62

5’ leD 7800 79 7,845 99



ALASKA T8iP65 surface mounted linear fluorescent fittings for t8 lamps.


excluding lamps- high-frequency or magnetic gear

APPLICATIONS- industry, garages and workshops- changing rooms- hF version suitable for use to -10˚c.

Magnetic version suitable for useto 0˚c. For applications with lowertemperatures please contact nVc.

139

INDUST

RIA

Ll

igh

tin

gw

ww.n

vcuk

.com

|+44

(0)1

21457

634

0

CONSTRUCTION- ABs base- Polycarbonate controller- Polycarbonate clips- steel gear tray retained on

straps for ease of installation- supplied complete with

mounting kit


available in all versions except18W. Add suffix M3.

- Dimming. Add suffix 1-10, Dsi,DA, sD or cF.

ACCESSORIES- see page 142

to fit AlAsKA to ceiling:

1 Fix mountingbrackets to ceiling

2 Prepare cable entryhole, rear or end

3 snap-fit bodyto brackets

AlAsKA t8 hF


nAK118/hF AlAsKA 1X18Wt8 hF noncoRRosiVe nolAMP








AlAsKA t8 MAgnetic


nAK/118 AlAsKA 1X18W t8 non coRRosiVe no lAMP








A

C FIXING

2650

6 X 15 OBR

24

4 X 7 OBR

BRACKET DETAILSSCALE 2:1

NO. OF CLIPSCSIZE A

FIXING BRACKETSSEE BRACKET DETAILSFOR HOLE LAYOUT

108

B

640018W 658

ALTERNATIVE CABLEENTRY POINTS NOTE: NOT TO

BE USED FOR FIXING

108

B

140

BSINGLE

BTWIN

961090036W 1266 140961290058W 1566 1409612111570W 1835 166106

CENTRAL ALTERNATIVE CABLEENTRY POINT - NOT ON 70W

SINGLE LAMP TWIN LAMP

CABLE ENTRY HOLEC/W IP65 GROMMETFITTED AT ONE END


ww

w.n

vcuk

.com

|+44

(0)1

21457

634

0IN

DUST

RIA

Ll

igh

tin

g

ALASKA 110V140

iP65 linear fluorescent fittings for t8 lampsand 110V operation.


supplied excluding lamps- Magnetic gear- 110V operation

CONSTRUCTION- Yellow ABs base- Polycarbonate controller- Yellow polycarbonate clips- steel gear tray retained on straps- supplied complete with

mounting kit

APPLICATIONS- construction sites- suitable for use to 0˚c.

For applications with lowertemperatures pleasecontact nVc


available in all versions. suffix M3.note tA20˚c on 2x 18W.

ACCESSORIES- spare clips (stainless steel and

polycarbonate) and sparepolycarbonate controllers areavailable. All accessories are to beordered as separate items.see page 142.

A

B FIXING

2650

6 X 15 OBR

24

4 X 7 OBR

BRACKET DETAILSSCALE 2:1

FIXING BRACKETSSEE BRACKETDETAILS FOR HOLE LAYOUT

108

140

NO. OF CLIPSBSIZE A640018W 658

1090036W 12661290058W 1566

ALTERNATIVE CABLE ENTRYPOINTS NOTE: NOT TO BE

USED FOR FIXING

108

96

SINGLE LAMP TWIN LAMP

CABLE ENTRY HOLEC/W IP65 GROMMETFITTED AT ONE END

to fit AlAsKA to ceiling:

1 Fix mountingbrackets to ceiling

2 Prepare cable entryhole, rear or end

3 snap-fit bodyto brackets


nAK218/110V AlAsKA 2X18Wt8 110V noncoRRosiVe no lAMP

nAK218/110V/tA20/M3 AlAsKA 2X18Wt8 110V noncoRRosiVe M3 no lAMP


nAK136/110V/M3 AlAsKA 1X36Wt8 110V noncoRRosiVe M3 no lAMP






PITTSBURGHiP65 stainless steel linear fluorescent fitting

for t5 and t8 lamps.

141

INDUST

RIA

Ll

igh

tin

gw

ww.n

vcuk

.com

|+44

(0)1

21457

634

0

t5


nPB128/t5 PittsBURgh 1X28W t5 ss non coRRosiVe no lAMP










t8


nPB136/hF PittsBURgh 1X36W t8 ss non coRRosiVe +no lAMP




APPLICATIONS- chemically corrosive environments where traditional

plastic materials (polycarbonate and ABs) are unsuitable- situations where vandal resistance is required

SPECIFICATION- For t5 and t8 lamps. supplied excluding lamps

CONSTRUCTION- grade 304 stainless steel body- stainless steel clips with anti-tamper screws- toughened glass cover, retained on stainless steel straps- steel gear tray, retained on stainless steel straps- supplied complete with iP65 cable gland, breather

valve and suspension kit

OPTIONS- Emergency. Maintained 3 hours available in all

versions. Add suffix M3- Dimming. Available in all versions. Add suffix 1-10,

Dsi, DA, sD or cF as required.

PittsBURghsuspension kit - included


A full range of spares and accessories is available for all our non-corrosive fittings.

oRDeR coDe

nAK/cliP/PlAstic AlAsKA clip polycarbonate AlAsKA t8, except 70W

DescRiPtion UseD on

ww

w.n

vcuk

.com

|+44

(0)1

21457

634

0IN

DUST

RIA

Ll

igh

tin

g

NON-CORROSIVE ACCESSORIES142

sPARe contRolleRsthe controllers (covers) used across the AlAsKA range are all made from durable, UV stable polycarbonate.in case of breakage or dirt accumulation a full range of spare controllers is available, as listed below.

nAKv2 contRolleRs


nAK/V2/cntR/1/660 AlAsKA V2 single Pc contRolleR 660MM




nAK/V2/cntR/2/660 AlAsKA V2 tWin Pc contRolleR 660MM




t8 contRolleRs


nAK/cntR/118 AlAsKA contRolleR 1X18W

nAK/cntR/136 AlAsKA contRolleR 1X36







nAK/70/cliP/PlAstic AlAsKA 70W clip polycarbonate AlAsKA t8, 70W only

nAK/cliP/ss AlAsKA clip stainless steel 316 + screw AlAsKA t8, except 70W

nAK/70/cliP/ss AlAsKA 70W clip stainless steel 316 + screw AlAsKA t8, 70W only

nAK/V2/cliP/PlAstic AlAsKA V2 clip polycarbonate AlAsKA V2, VAlDeZ,gReenlAnD

nAK/V2/cliP/ss AlsAKA V2 clip stainless steel 316 + screw AlAsKA V2, VAlDeZ,gReenlAnD


NON-CORROSIVE SENSORSiP65 passive infra-red (PiR) sensors are available as pre-wired kits to be added to

AlAsKA by the installer on site. these are a simple way to deliver big energysavings and reduced installation costs.

in addition to the micro-wave sensor that can be factory-fitted to the AlAsKA v2(see page 136), the sensors on this page can be retro-fitted by the installer on-site.

143

INDUST

RIA

Ll

igh

tin

gw

ww.n

vcuk

.com

|+44

(0)1

21457

634

0

3 sensor kits are available:

N/PIR/MSB1001Tthis provides on/off functionality in response tooccupancy. there is no lux threshold for switching onand the time-out is set to 20 minutes. 2A rated.

N/PIR/MSB1001PTon/off functionality as above, but with an adjustable luxthreshold and time-out. 2A rated.

N/PIR/MSB1001DALITFully adjustable, and with a DAli output for use inconjunction with DAli control gear inside the fitting.the available features include maintained light level.if this is required the fittings with which the sensor isto be used must be ordered with DA in the order code.Maximum 4 pieces of DAli gear per sensor.

to adjust these for optimal operation a hand-heldprogrammer may be required.

A simpler alternative to DAli dimming is to installfittings that will switch on at 100% when presence isdetected and dim to 10% when nobody is present.this can be achieved with either of the two on/offsensors above, combined with fittings ordered withcF in their order code.

Detection pattern


n/PiR/MsB1001t BAtten MoUnt PiR iP65 eo

n/PiR/MsB1001Pt BAtten MoUnt PiR iP65 eo lUX & tiMe ADJUst

n/PiR/MsB1001DAlit BAtten MoUnt PiR iP65 eo DAli

nhs/hP18 hAnDset FoR eX-oR sensoRs

nhs/hP18hand-held programmer


104734

467

600

654

355

340

704

734

ww

w.n

vcuk

.com

|+44

(0)1

21457

634

0IN

DUST

RIA

Ll

igh

tin

g

ATLANTA144


nAt455/Pll AtlAntA 4X55WPll sPoRts-hAll

nAt455/Pll/M3 AtlAntA 4X55WPll sPoRts-hAll M3

nAt455/Pll/Ds AtlAntA 4X55WPll sPoRts-hAll DUAl sWitcheD

nAt455/Pll/Ds/M3 AtlAntA 4X55WPll sPoRts-hAll DUAl sWitcheD M3

nAt480/Pll AtlAntA 4X80WPll sPoRts-hAll

nAt480/Pll/M3 AtlAntA 4X80WPll sPoRts-hAll M3

nAt480/Pll/Ds AtlAntA 4X80WPll sPoRts-hAll DUAl sWitcheD

nAt480/Pll/Ds/M3 AtlAntA 4X80WPll sPoRts-hAll DUAl sWitcheD M3

Robust Pll 55W or 80W fitting for sports hall use.

CONSTRUCTION- Robust steel body- one-piece steel guard screw

fitted to body- locking lamp holders- White powder coated

textured finish- Miro 4 reflectors for

maximum efficiency

APPLICATIONS- sports halls

SPECIFICATION- For 4 x 55W and 80W Pll lamps.


control gear


available. suffix M3.- Dimming. Add suffix 1-10, Dsi,

DA, sD or cF.- Dual switching. suffix Ds- Modular wiring. Available with

4-pole panel mount connector.Add suffix M02

- LED. Variant available.enquire for details.


OREGON LEDA highly efficient leD fitting with a wide range

of sensor options.

APPLICATIONS- industry and warehouses- Mounting heights 5+m

SPECIFICATION- 12,000, 18,000 and 24,000

lumen versions available- 4,000K, >.80 cRi.- 105 luminaire lumens per

circuit watt- samsung leDs and Philips driver

CONSTRUCTION- Robust steel body,

white powder coated- suitable for installation on chain,

lighting trunking and BesA fixings

145

INDUST

RIA

Ll

igh

tin

gw

ww.n

vcuk

.com

|+44

(0)1

21457

634

0

- Modular wiring. Available with4-pole panel mount connector.Add suffix M02

- High-rack reflector.Add suffix hR


available. Add suffix M3- Dimming. For DAli dimming,

add suffix DA- Sensors. Available with:

- PiR occupancy sensing only,add suffix PiR.

- PiR occupancy sensing anddimming, add suffix PiRD


noR12K/leD/840 oRegon 12000 lUMen leD loW-BAY col840

noR12K/leD/M3/840 oRegon 12000 lUMen leD loW-BAY +M3 col840






CONNECTOR POSITION IFORDERED WITH SUFFIX M02

ww

w.n

vcuk

.com

|+44

(0)1

21457

634

0IN

DUST

RIA

Ll

igh

tin

g

OREGON T5146

A high performance fluorescent fittingwith many sensor options.


noR254/t5 oRegon 2X54Wt5







available. Add suffix M3.- Dimming. Add suffix 1-10, Dsi, DA,

sD or cF.- Sensors.

- PiR occupancy sensing.Add suffix PiR

- PiR occupancy sensing and dimto 10%. Add suffix cF/PiR

- PiR occupancy sensing anddimming. Add suffix PiRD


SPECIFICATION- For t5 54W and 80W,

2, 3 and 4 lamps- supplied excluding lamps- leading brand enec

control gear- 1 lamp per reflector. loR .93

CONSTRUCTION- Robust steel body- White painted textured finish- Miro 4 reflectors for efficiency

- Maintained light level only.Add suffix Mll

- Modular wiring. Available with4-pole panel mount connector.Add suffix M02.

- High-rack reflector. Add suffix hR.- Attachments. Polycarbonate covers

and wire guards available. enquirefor details.


OREGON T5 SLIMA lower cost and more compact version of the popular

oRegon t5. easier to handle and install.



DA or cF.- Sensors.


- PiR occupancy sensing anddim to 10%. Add suffix cF/PiR




SPECIFICATION- For t5 54W and 80W,

4 and 6 lamps- supplied excluding lamps- leading brand enec

control gear- 2 lamps per reflector. loR .91


147

INDUST

RIA

Ll

igh

tin

gw

ww.n

vcuk

.com

|+44

(0)1

21457

634

0


- High-rack reflector.Add suffix hR.

- Attachments. Polycarbonatecovers and wire guards available.enquire for details.


noR454sl/t5 oRegon sliM 4X54Wt5 Flo-BAY

noR454sl/t5/M3 oRegon sliM 4X54Wt5 Flo-BAY M3










ww

w.n

vcuk

.com

|+44

(0)1

21457

634

0IN

DUST

RIA

Ll

igh

tin

g

OREGON PLL148

A high performance fluorescent fittingwith a range of sensor options.


noR455/Pll oRegon 4X55WPll




AttAchMents


noR/coVeR/Pc/455/Pll oRegon coVeR PolYcARBonAte 4X55-80W Pll

noR/coVeR/Pc/655/Pll oRegon coVeR PolYcARBonAte 6X55-80W Pll

noR/Wg/455/Pll oRegon WiRe gUARD 4X55-80W Pll

noR/Wg/655/Pll oRegon WiRe gUARD 6X55-80W Pll



DA, sD or cF.- Sensors.


- PiR occupancy sensing and dimto 10%. Add suffix cF/PiR




SPECIFICATION- For Pll 55W and 80W,

4 and 6 lamps- supplied excluding lamps- leading brand enec

control gear- 1 lamp per reflector. loR .93



- High-rack reflector. Add suffix hR.


149

INDUST

RIA

Ll

igh

tin

gw

ww.n

vcuk

.com

|+44

(0)1

21457

634

0

OREGON LED

oRegon leD is available withthe ex-or range of sensors fitted.two options are available:

PIR. occupancy sensing, withadjustable time-out and lux on andlux off levels. there is no dimming.

PIRD. occupancy sensing, with adjustable time-out,maintained light level and a wide range of otherprogrammable features, including dim-to levels.if desired, the occupancy sensing feature can bedisabled completely so that the sensor operatessolely as a maintained light level device. the driverfitted will be DAli enabled.

there are two handsets available to use withthe ex-or sensors:

NHS/HP18 is an easy-to-useand low cost hand-set. it issuitable for use at ranges upto 16m, and is suitable forcommissioning oRegonleD fittings with standardPiR (non-dimming)functionality.

NHS/HP2000 is a fullyfunctional hand-set with2-way communication.this is recommended whendimming sensors are to becommissioned and on largersites with many sensors.

ex or sensor detection area

cP electronics sensor detection area

A lens mask to prevent end-of-aisle triggering isavailable as an optional extra with the ex-or sensor.order as n/hBPiRlM.

For more details of oRegon sensor operation and advice on specification, ask to see our brochure “the completeenergy efficient lighting solution”.

to commission oRegon sensors we can supply the appropriate commissioning tools, detailed above, so that theinstaller or end-user can commission their sensors themselves. Alternatively, we can provide a flexiblecommissioning service, see next page.

OREGON FLUORESCENT

oRegon t5, t5 sliM and Pll areavailable with the cP electronicsrange of sensors fitted. threeoptions are available:

PIR. occupancy sensing, withadjustable time-out and lux on andlux off levels. there is no dimming.

PIRD. occupancy sensing, withadjustable time-out, maintainedlight level and a wide range of otherprogrammable features, including dim-tolevels. if desired, the occupancy sensing feature canbe disabled completely so that the sensor operatessolely as a maintained light level device. the controlgear fitted will be DAli enabled.

MLL. Maintained light level only, with no occupancysensing. the control gear fitted will be DAli enabled.

there are two handsets available to use with thecP electronics sensors:

NHS/UHS5 is a low costdevice with a range up to7m which can be used toadjust the most commonlyused parameters.

Where oRegon isdelivered with PiR or cF/PiRit will often be found that thenhs/Uhs5 is adequate.

NHS/UNLCDHS is a morefeature-rich hand-set witha range of up to 25M.With this all the featuresof oRegon with itsvarious sensing optionscan be accessed.

Where oRegon is deliveredwith any sort of dimming it willusually be found that nhs/UnlcDhs is required.16m

16m

OREGON SENSOR OPTIONS


ww

w.n

vcuk

.com

|+44

(0)1

21457

634

0IN

DUST

RIA

Ll

igh

tin

g150

Chart 1 - explaining V01-V08, V51-V53 Chart 2 - explaining V20-V23, V60-V62

On-site commissioning. if dimming in response to changing levels of natural light, or lux on/lux off levels are required,then this can only be done after installation, on-site. We can provide a complete on-site commissioning service, whichis chargeable. Please ask for details. Alternatively, we can supply the necessary commissioning tools shown on p149.

For cP electronics occupancy sensors with DAli dimming:

Time-out Fade value Fade time Min value(Mins) (% light level) (Mins) (% light level)

V01 20 50% 5 see chart 1

V02 20 20% 5 see chart 1

V03 10 50% 5 see chart 1

V04 10 20% 5 see chart 1

V05 20 50% 10 see chart 1

V06 20 20% 10 see chart 1

V07 10 50% 10 see chart 1

V08 10 20% 10 see chart 1

V20 20 n/a n/a 50% see chart 2




THE FOLLOWING SETS OF SENSOR VALUES ARE AVAILABLE:

Factory commissioning. Where maintained light-levelsor lux on/lux off levels are not required, then it is oftenpractical to programme the sensors before they aredespatched to you. this can save substantial amountsof time and cost. this service is available on alloRegon fittings ordered with PiRD (occupancysensing with dimming). to order this service, pleaseselect the set of sensor values you require from themenu below, adding the suffix V01, V02 etc to yourorder or enquiry. We will then programme the sensorin your fittings as per the table below.

A few points to note:

- DALI. When PiRD is ordered the sensor will alwaysbe set to use the DAli control protocol

- “Burn-in” is a standard feature of cP electronics’sensors and protects fluorescent lamps frompremature failure that can result if they are dimmedbefore they have been burned-in. When factorycommissioning is ordered with fluorescent fittings,burn-in for 100 hours will be enabled, so till this timehas elapsed the fittings will not dim at all. this is not amalfunction – this feature is designed to protect thelamps. on leDs burn-in is not applicable and will notbe enabled.

Finally, before we complete your order we will ask you tocomplete our sensor Value confirmation form, as a finalcheck to ensure that the sensor values you have orderedare indeed those that you require.

OREGON SENSOR COMMISSIONING

FADEVALUE

INITIAL OCCUPANCYDETECTED

LAST OCCUPANCYDETECTED

LIGHTS TURN ON LIGHTS TURN OFF

FADE TIME LIGHTS REMAINOFF TILL NEXTOCCUPANCYIS DETECTED

MINVALUE

INITIAL OCCUPANCYDETECTED

LAST OCCUPANCYDETECTED

LIGHTS DIM-UP TO 100% LIGHTS DIM-DOWNTO MIN VALUE

LIGHTS REMAINAT MIN VALUE TILLNEXT OCCUPANCYIS DETECTED

For ex-or occupancy sensors with DAli dimming:

Time-out Fade value Fade time Min value(Mins) (% light level) (Mins) (% light level)

V51 20 10% 60 see chart 1

V52 10 10% 30 see chart 1

V53 5 10% 15 see chart 1





VENETA151

INDUST

RIA

Ll

igh

tin

gw

ww.n

vcuk

.com

|+44

(0)1

21457

634

0

iP20 high-bay. Fast to install, easy to maintain.

coMPlete PRoDUcts

oRDeR coDe DescRiPtion Weight kg

nVe150son-e/220 VenetA 150W son hiBAY+lAMP 11.0



nVe200hQi-e/740 VenetA 200W hQi hiBAY+Ps lAMP 11.0

nVe250hQi-e/740 VenetA 250W hQi hiBAY+lAMP 11.0

nVe350hQi-e/740 VenetA 350W hQi hiBAY+Ps lAMP 11.5

nVe400hQi-e/740 VenetA 400W hQi hiBAY+lAMP 12.0

sePARAte coMPonents


nhB/BoDY/iP20 high BAY iP20 BoDY onlY

nhB/ReFl/4Kh high BAY ReFlectoR c/W 4 KeY holes

ngeAR-tRAY/150son geAR tRAY UniVeRsAl 150W son stD ignitoR



ngeAR-tRAY/200hQi/Ven geARtRAYUniVeRsAl200WhQitiMeDignitoRVentURe

ngeAR-tRAY/250hQi geAR tRAY UniVeRsAl 250W hQi stD ignitoR



nhB/glAss high BAY glAss With seAling Kit

nhB/PD high BAY PolYcARBonAte DisheD coVeR

210

308

ø490

WITH PCDISHED

COVER FITTED

160

520

670

APPLICATIONS- industrial production areas and warehouses

SPECIFICATION - coMPlete PRoDUct- Metal halide single envelope lamps

- 250 and 400W- Pulse start (Ps) energy saving 200 and 350W

- Digital timed ignitor- supplied in a kit of 4 items:

- Body - gear tray - Reflector - european lamp

CONSTRUCTION- steel body with white textured finish- spun aluminium reflector

OPTIONS- Veneta can be bought as a complete item,

as described above, or as separate items, as listed- Polycarbonate dished cover available

easy access toterminal block

All gear trays inthe range connect tothe body with a plugand socket

Universal body designsuits all gear trays inthe range. Bodysupplied empty foreasy installation


ww

w.n

vcuk

.com

|+44

(0)1

21457

634

0IN

DUST

RIA

Ll

igh

tin

g

REDMOND152

iP20 high-bay for retail use. Flexible to stock & easy to install.

SPECIFICATION - coMPlete PRoDUct- Metal halide colour 740 single envelope lamps

- 250 and 400W- Pulse start energy saving 200 and 350W

- Metal halide colour 950 double envelope pulsestart 365W lamp

- Digital timed ignitor- supplied in a kit of 6 items:

- Body - gear tray- cowl - Refractor- european lamp - lens

CONSTRUCTION- steel body, white textured finish- Acryllic refractor and lens

OPTIONS- Redmond can be bought as a complete item,

as described above, or as separate items, as listed

210

630

WIT

HLE

NS

580

W/O

LEN

S

160 308

ø567

coMPlete PRoDUcts


nRe150son-e/220 ReDMonD 150W son hiBAY+lAMP 11.0



nRe200hQi-e/740 ReDMonD 200W hQi hiBAY+Ps lAMP 11.0

nRe250hQi-e/740 ReDMonD 250W hQi hiBAY+lAMP 11.0



nRe400hQi-e/740 ReDMonD 400W hQi hiBAY+lAMP 12.0

sePARAte coMPonents









ngeAR-tRAY/365-400hQi/Ven geARtRAYUniVeRsAl365-400WhQitiMeDignitoRVentURe


nhB/BoDY/iP20 high BAY iP20 BoDY onlY

nhB/ReFR/BoWl high BAY ReFRActoR BoWl W/o coWl

nhB/coWl/4Kh high BAY coWl With 4 KeY holes

nhB/lens high BAY lens + Ring



Universal body designsuits all gear trays inthe range. Bodysupplied empty foreasy installation


EUGENEiP65 high-bay lighting for industrial and warehouse applications.

153

INDUST

RIA

Ll

igh

tin

gw

ww.n

vcuk

.com

|+44

(0)1

21457

634

0

glass suppliedwith seal, clips andchain ready fitted

iP65 Pluggable gland

WITH PCDISHED

COVER FITTED

ø300

ø490

304

614

764

CONSTRUCTION- Die-cast aluminium body- grey powder coat finish

APPLICATIONS- industrial production areas- Warehouses

SPECIFICATION- Metal halide and son lamps- supplied with the following,

which are also available as spares- toughened glass cover- spun aluminium reflector

- supplied with iP65 pluggablegland pre-wired to terminal block

OPTIONS- Polycarbonate dished cover

(see line drawing) is availableas a separate item. it istypically used in foodprocessing applications.


neU250son-e/220 eUgene 250W son hiBAY iP65+lAMP 11.5

neU400son-e/220 eUgene 400W son hiBAY iP65+lAMP 12.5

neU250hQi-e/740 eUgene 250W Mh hiBAY iP65+lAMP 11.0

neU400hQi-e/740 eUgene 400W Mh hiBAY iP65+lAMP 12.0

sPARes


nhB/glAss high BAY glAss With seAling Kit 2.0

nhB/ReFl/4Kh high BAY ReFl c/W 4 KeY holes 0.68

nhB/PD highBAYPolYcARBonAteDisheDcoVeR 0.4

neU/glAnD/MAle eUgene iP65 glAnD MAle (on BoDY)

neU/glAnD/FeMAle eUgeneiP65glAnDFeMAle(sePARAte)


ww

w.n

vcuk

.com

|+44

(0)1

21457

634

0IN

DUST

RIA

Ll

igh

tin

g

KELSO154

iP20 low-bay. Fast to install, easy to maintain.


nKe150son-t/220 Kelso 150W son loW BAY + lAMP



nKe200hQi-t/740 Kelso 200W hQi loW BAY + Ps lAMP

nKe250hQi-t/740 Kelso 250W hQi loW BAY + lAMP

nKe350hQi-t/740 Kelso 350W hQi loW BAY + Ps lAMP

nKe400hQi-t/740 Kelso 400W hQi loW BAY + lAMP

sePARAte coMPonents & AttAchMents


nKe/BoDY Kelso loW BAY BoDY onlY

nKe/glAss Kelso glAss coVeR 392X305X4

nKe/coVeR/Pc Kelso PolYcARBonAte DisheD coVeR 392X305

nKe/Wg Kelso WiRe gUARD sliDe-in

nKe/WgF Kelso WiRe gUARD WRAP-RoUnD (FolDeD)

nKe/RR Kelso RAcK ReFlectoR




ngeAR-tRAY/200hQi/Ven geAR tRAY UniVeRsAl 200W hQi tiMeD ignitoR VentURe


ngeAR-tRAY/350hQi/Ven geAR tRAY UniVeRsAl 350W hQi tiMeD ignitoR VentURe


ngeAR-tRAY/365-400hQi/Ven geARtRAYUniVeRsAl365-400WhQitiMeDignitoRVentURe

APPLICATIONS- Warehouses, garages and workshops

SPECIFICATION- Metal halide single envelope lamps 250 and 400W- Pulse start (Ps) energy saving 200 and 350W- Digital timed ignitor- supplied as a kit of 3 items

- Body - gear tray - european lamp

CONSTRUCTION- steel body with white textured finish- Polished aluminium reflector with dimpled finish

OPTIONS- if required, all items can be bought and

stocked separately for maximum flexibility.- Polycarbonate dished covers are available.

suitable for use up to 250W only.- glass cover available. order as separate item.



Universal bodydesign suits all geartrays in the range.Body supplied emptyfor easy installation


TIOGAiP54 under-canopy fitting for leD, metal halide

and son light sources.

155

INDUST

RIA

Ll

igh

tin

gw

ww.n

vcuk

.com

|+44

(0)1

21457

634

0

650

650

252

332

650

650

252

WITH PC PYRAMID DIFFUSER WITH GLASS PANEL

600-605 x 600-605 CUTOUT600-605 x 600-605 CUTOUT


nti120/leD/Pc/750 tiogA 120W leD cAnoPY+Pc coVeR+lAMP

nti150son-t/Pc/220 tiogA 150W son cAnoPY+Pc coVeR+lAMP



nti250hQi-t/Pc/740 tiogA 250W hQi cAnoPY+Pc coVeR+lAMP

nti400hQi-t/Pc/740 tiogA 400W hQi cAnoPY+Pc coVeR+lAMP

sPARes AnD AttAchMents


nti/glAss tiogA glAss coVeR 564X564X4

nti/coVeR/PYRAMiD/Pc tiogAPolYcARBonAtePYRAMiDcoVeR565X565

nti/geAR-tRAY/120/leD tiogA geAR tRAY c/W 120W leD DRiVeR






APPLICATIONS- Petrol forecourts- loading bays

SPECIFICATION- leD versions

- 96 cree leDs- 50,000 hr leD life- 120W power consumption, c 7,000 lumens

- hiD versionssupplied in a kit of 3 items: body with cover

(Pc of glass), gear tray and leading brand lamp

CONSTRUCTION- steel body with deep gasket for reliable iP54 seal- Detachable gear tray with plug/socket connection

on all variants for easy installation and maintenance- gear tray accessible from above and below- sealed against the ingress of insects for long-lasting

good looks

OPTIONS- supplied with clear polycarbonate pyramid

controller, suffix Pc, as listed, or for flat glass cover,replace Pc with g

- Metal halide pulse-start versions available.Please enquire for details.


ww

w.n

vcuk

.com

|+44

(0)1

21457

634

0IN

DUST

RIA

Ll

igh

tin

g156


SU

RFA

CE

&S

US

PE

ND

ED

LIG

HTI

NG

CO

NT

EN

TS

EXTERIOR

lig

ht

ing

co

nt

en

ts

EDMONTONpage 166

NIAGARApage 167

MONTREALpage 168

LEYHILLpage 169

LAWRENCEpage 170

BAFFINpage 171

WINNIPEGpage 164

ELLESMEREpage 172

VANCOUVERpage 165

BEAUFORTpage 173

BRONXpage 174

YUKONpage 176

ALBERTApage 177

RYDERpage 178

TETONpage 158

TIVOLIpage 159

TIVOLINIpage 160

TYROLpage 161

HUDSONpage 162

NVC_EXTERIOR.qxp:EXTERIOR 22/4/13 17:41

www.nvcuk.com

|+44(0)121457

6340

EXTERIOR

lig

ht

ing

TETON158

Die-cast aluminium mini-spotlights.

BASE BRACKET


nte/50/gU10/iP65/BAse/gR teton 50W gU10 Mini sPot BAse gReY no lAMP

nte/50/gU10/iP65/BRAK/gR teton 50W gU10 Mini sPot BRAcKet gReY no lAMP

nte/50/gU5.3/iP68/BRAK/gR teton50WgU5.3 iP68MinisPotBRAcKet gReYnolAMP

nte/XFMR/iP66/12V teton tRAnsFoRMeR iP66 12V

CONSTRUCTION- Die-cast aluminium body and bezel- choice of mounting base or

mounting bracket, as pictured- gU10 version iP65 rated, class i- gU5.3 version iP68 rated, class iii- Pre-wired with 2.5m h05ss-F

3x1.0mm flex- Whole fitting light grey semi-gloss

powder coated finish

APPLICATIONS- Parks and gardens- signage- Building exteriors

SPECIFICATION- supplied with choice of gU10

(mains) or gU5.3 (12v)lampholder, excluding lamp

- iP66 torroidal transformeravailable for use withgU5.3 version

- suitable for use with leD,mains or lV halogen lamps,according to version

OPTIONS- White and black finishes available

via special order

transformer


TIVOLIstainless steel and die-cast aluminium large ground lights.

SPECIFICATION- For 35W or 70W g12 metal

halide lamps- For 70W double-ended metal

halide lamp- supplied including colour 830 lamp- Beam direction adjustable +/- 15˚

from vertical- Max loading 5,000Kg- Max glass temperature 110˚c- Round or square bezel


ntV/35/g12/Ro/830 tiVoli 35W g12 gRoUnD light RoUnD+830 lAMP

ntV/35/g12/sQ/830 tiVoli 35W g12 gRoUnD light sQUARe+830 lAMP

ntV/70/g12/Ro/830 tiVoli 70W g12 gRoUnD light RoUnD+830 lAMP

ntV/70/g12/sQ/830 tiVoli 70W g12 gRoUnD light sQUARe+830 lAMP

ntV/70/RX7s/Ro/830 tiVoli 70W RX7s gRoUnD light RoUnD+830 lAMP

ntV/70/RX7s/sQ/830 tiVoli 70W RX7s gRoUnD light sQUARe+830 lAMP

ROUND SQUARE

159

EXTERIOR

lig

ht

ing

www.nvcuk.com

|+44(0)121457

6340

CONSTRUCTION- Die-cast aluminium body- Brushed stainless steel bezel

secured with 3 allen-keyscrews. Allen key supplied

- clear glass- Mounting receptacle moulded

in thermo-plastic- Pre-wired with 4m h07

Rn-F 3x1.5mm flex- supplied with 2 cable glands

for loop in/out

2 cable glandsfor loop in/out

APPLICATIONS- Parks and gardens- Building exteriors- not suitable for walk-over

or drive-over applications


www.nvcuk.com

|+44(0)121457

6340

EXTERIOR

lig

ht

ing

TIVOLINI160

stainless steel and die-cast aluminium small ground lights.

ROUND SQUAREoRDeR coDe DescRiPtion

ntl/35/gU10/Ro tiVolini 35W gU10 gRoUnD light RoUnD no lAMP

ntl/35/gU10/sQ tiVolini 35W gU10 gRoUnD light sQUARe no lAMP

SPECIFICATION- For 35W (max) gU10 lamps,

leD or tungsten- supplied excluding lamp- Max loading 5,000Kg- Max glass temperature 135˚c with

tungsten lamp, 35˚c with leD lamp- Round or square bezel

APPLICATIONS- Parks and gardens- Building exteriors- suitable for walk-over or

drive-over applications whenfitted with leD lamp


secured with 3 allen-key screws.Allen-key supplied

- clear glass 12mm thick- Mounting receptacle moulded in

thermo-plastic- Pre-wired with 3m h05 Rn-F

3x1.0mm flex- supplied with single cable gland


TYROLstainless steel and die-cast aluminium linear ground lights.


ntY114/t5/sY tYRol 1X14W t5 iP67 lineAR gRoUnD light sYMMetRic

ntY121/t5/sY tYRol 1X21W t5 iP67 lineAR gRoUnD light sYMMetRic

ntY14/leD/sY/860 tYRol 14W leD iP67 lineAR gRoUnD light sYMMetRic

ntY114/t5/AsY tYRol 1X14W t5 iP67 lineAR gRoUnD light AsYMMetRic

ntY121/t5/AsY tYRol 1X21W t5 iP67 lineAR gRoUnD light AsYMMetRic

161

EXTERIOR

lig

ht

ing

www.nvcuk.com

|+44(0)121457

6340

OPTIONS- t5 versions available with

symmetric (suffix sY)or asymmetric (suffix AsY)distribution


secured with 2 allen-keyscrews. Allen-key supplied

- clear glass 12mm thick- stainless steel mounting receptacle- supplied with single cable gland

APPLICATIONS- Building exteriors- Paths and steps- suitable for walk-over applications

SPECIFICATION- For t5 lamps. supplied with

enec gear but excluding lamps- For leDs, supplied complete with

col. 860 leDs and driver- Max loading 3,000Kg- Max glass temperature 30˚c

leD version


www.nvcuk.com

|+44(0)121457

6340

EXTERIOR

lig

ht

ing

HUDSON162

iP65 aluminium bollardsfor hiD and Pl lamps.


nhD70son-ei/Do/lo/220 hUDson 70W son 1M DoMe toP AlU loUVRe+220 lAMP

nhD70hQi-e/Do/lo/740 hUDson 70W hQi 1M DoMe toP AlU loUVRe+740 lAMP

nhD126/Pl/hF/Do/lo/840 hUDson 26W Pl 1M DoMe toP AlU loUVRe+840 lAMP



CONSTRUCTION- heavy gauge extruded

aluminium body- internal gear tray for ease

of maintenance- Detachable base plate for easy

installation and accurate positioning- Vandal resistant screws- tough polycarbonate cover

over louvre- Black textured finish

APPLICATIONS- Paths- car parks- Amenity areas

SPECIFICATION- 70W son and hQi or 26W,

32W, 42W Pl with hF gear- supplied with premium

brand lamps- 70W son-ei col 220- 70W hQi col 740- 26/32/42W Pl col 840

- satin finish aluminium louvre


available on Pl versions only.Add suffix M3

- Mounting. choice of J bolts orroot-mounting kit, ordered asseparate items.

AttAchMents


nhD/JBoltKit/12 hUDson J Bolt Kit 12"

nhD/RMKit hUDson Root MoUnting Kit

Base plate

J-bolt kit


CANADA163

EXTERIOR

lig

ht

ing

www.nvcuk.com

|+44(0)121457

6340

COVER PIPE

Available in 2 colours, black and grey. A black cover pipe is suppliedas standard with Vancouver, niagara and edmonton. A grey coverpipe is supplied as standard with Winnipeg.

canada is a versatile range of post-top fittings, ideal for urbanamenity, municipal and housing areas.

on the following pages we list the individual members of therange, all of which are to be ordered as complete items,including european brand lamps and control gear. these arelisted in their most popular formats, but because of the modularnature of the canada range there is flexibility to deviate fromthe exact products shown on the following pages if required.

the canada range is supplied as complete products. if any of theabove items are required as spare parts please enquire for details.

GEAR TRAY

4 versions available. All share the same overall size and are fittedwith an e27 (for hiD) or 4-pin g24 (for compact fluorescent)lamp holder as appropriate.

• 70W son • 70W hQi • 100W hQi • 1x42W Plt

For 150W son & hQi the gear is supplied for remotemounting, not on a gear tray, for thermal reasons.

GALLERY

4 versions available. Black or grey, 60mm or 76mm. the blackgalleries are short (as pictured here). the grey galleries arelonger, as shown on the Winnipeg on page 146). A black galleryis supplied as standard with Vancouver, niagara and edmonton.A grey gallery is supplied as standard with Winnipeg.All canada products are listed with 76mm galleries asstandard, but can be supplied with 60mm galleries if required.

HEAD

Available in 4 shapes (Vancouver, Winnipeg, niagara andedmonton), as shown on the following pages. several of theheads are available with a choice of materials and finishes.the head shown here is the niagara.

LAMP

All products in the canada range are supplied with leadingbrand son, hQi or Plt lamps.

LOUVRE

Made from satin finish stainless steel. supplied as standard on allof the canada range, apart from the niagara and the semi-opalversion of the Winnipeg where we consider that no louvre isrequired. A glass refractors is available as an alternative to thelouvre via a special order. Please ask for details.


www.nvcuk.com

|+44(0)121457

6340

EXTERIOR

lig

ht

ing

WINNIPEG164

iP54 post top fitting forson, hQi and 42W Pl lamps.


nWn70son-ei/gAl/76/A/cl/220 WinniPeg 70W son-ei long gAlleRY 76MM PMMA cleAR +220lAMP

nWn150son-ei/gAl/76/A/cl/220 WinniPeg 150W son-ei long gAlleRY 76MM PMMA cleAR +220lAMP

nWn70hQi-e/gAl/76/A/cl/740 WinniPeg 70W hQi-e long gAlleRY 76MM PMMA cleAR +740lAMP



nWn142Plt/gAl/76/A/cl/840 WinniPeg 1X42W Plt long gAlleRY 76MM PMMA cleAR +840lAMP

CONSTRUCTION- PMMA (acrylic) head,

clear or semi-opal- All supplied with gear.

Remote gear on 150W versions- Weight:

- 70W, 100W 4.5Kg- 150W 2.7Kg (remote gear)- 42W 2.9Kg

- Windage = 0.14m2

OPTIONS- Main cover. choice of clear (cl)

with stainless steel louvre as listed,or for semi-opal without louvre,add suffix so

- Spigot diameter. 76mm asstandard. 60mm available byspecial order. spigot reducers areavailable, see page 179

APPLICATIONS- Parks and gardens- Urban amenity areas

SPECIFICATION- All supplied with premium

brand lamp:- son-ei 70W & 150W col 220- hQi 70W, 100W & 150W col 740- Plt 1x42W col 840

- For 76mm spigot mounting


VANCOUVERiP54 post top fitting for

son, hQi and 42W Pl lamps.

CONSTRUCTION- clear Pc head with metal effect top- All supplied with gear.



- Windage = 0.20m2


SPECIFICATION- All supplied with premium brand lamp:

- son-ei 70W & 150W col 220- hQi 70W, 100W & 150W col 740- Plt 1x42W col 840

- stainless steel louvre- For 76mm spigot mounting


nVn70son-ei/gAs/76/cU/220 VAncoUVeR 70W son-ei shoRt gAlleRY 76 Pc coPPeR +220lAMP

nVn150son-ei/gAs/76/cU/220 VAncoUVeR150Wson-eishoRtgAlleRY 76 Pc coPPeR+220lAMP

nVn70hQi-e/gAs/76/cU/740 VAncoUVeR70WhQi-eshoRtgAlleRY76MM Pc coPPeR+740lAMP

nVn100hQi-e/gAs/76/cU/740 VAncoUVeR100WhQi-eshoRtgAlleRY76MMPccoPPeR+740lAMP

nVn150hQi-e/gAs/76/cU/740 VAncoUVeR150WhQi-eshoRtgAlleRY76MM Pc coPPeR+740lAMP

nVn142Plt/gAs/76/cU/840 VAncoUVeR1X42WPltshoRtgAlleRY76MM Pc coPPeR+840lAMP

165

EXTERIOR

lig

ht

ing

www.nvcuk.com

|+44(0)121457

6340

OPTIONS- Finish. choice of copper effect

(cU) as listed or for aluminiumadd suffix Al

- Spigot diameter. 76mm asstandard. 60mm available byspecial order. spigot reducersare available, see page 179


www.nvcuk.com

|+44(0)121457

6340

EXTERIOR

lig

ht

ing

EDMONTON166


gAlleRY AsseMBlies


neD/70son-ei/gAs/76/220 eDMonton 70W son-ei sh gAlleRY 76MM +220lAMP

neD/70hQi-e/gAs/76/740 eDMonton 70W hQi-e sh gAlleRY 76MM +740lAMP



neD/142/Plt/gAs/76/840 eDMonton 1X42W Plt sh gAlleRY 76MM +840lAMP

gloBes


neD/he/400/Pc/cl/Bl eDMontonheADPolY-c400MMcleARBlAcKtoPgloBe



CONSTRUCTION- supplied as 2 items

1. gallery assembly, comprisinggallery, cover pipe, louvre,gear (remote on 150W)and lamp

2. globe- total weight:

- 70W, 100W 4.5Kg- 150W 2.7Kg (gear remote)- 42W 2.9Kg

- Windage = 0.2m2 max

OPTIONS- Globe diameter. choice of 400,

450 and 500mm, as listed.- Globe finish. Polycarbonate, clear

with black top (cl/Bl) as shownand listed. For other finishes,replace cl/Bl with cl (clear)or o (opal). check availabilitybefore ordering.

- Spigot diameter. 76mm as standard.60mm available by special order.spigot reducers are available,see page 179


SPECIFICATION- All supplied with premium brand

lamp in wattages as listed- For 76mm spigot mounting.


NIAGARAiP54 post top fitting for

son, hQi and 42W Pl lamps.

CONSTRUCTION- clear polycarbonate head- All supplied with gear.



- Windage = 0.15m2


SPECIFICATION- supplied with premium brand lamp:

- son-ei 70W & 150W col 220- hQi 70W, 100W & 150W col 740- Plt 1x42W col 840



nni70son-ei/gAs/76/220 niAgARA 70W son-ei shoRt gAlleRY 76MM +220lAMP

nni150son-ei/gAs/76/220 niAgARA 150W son-ei shoRt gAlleRY 76MM +220lAMP

nni70hQi-e/gAs/76/740 niAgARA 70W hQi-e shoRt gAlleRY 76MM +740lAMP



nni142Plt/gAs/76/840 niAgARA 1X42W Plt shoRt gAlleRY 76MM +840lAMP

167

EXTERIOR

lig

ht

ing

www.nvcuk.com

|+44(0)121457

6340

OPTIONS- Spigot diameter. 76mm as

standard. 60mm available byspecial order. spigot reducersare available, see page 179


www.nvcuk.com

|+44(0)121457

6340

EXTERIOR

lig

ht

ing

MONTREAL168



nMo70son-ei/60/Pc/o/220 MontReAl 70W son-ei 60MM Pc oPAl +220lAMP

nMo70hQi-e/60/Pc/o/740 MontReAl 70W hQi-e 60MM Pc oPAl +740lAMP

nMo100hQi-e/60/Pc/o/740 MontReAl 100W hQi-e 60MM Pc oPAl +740lAMP

nMo142Plt/6o/Pc/o/840 MontReAl 1X42 Plt 60MM Pc oPAl +840lAMP

nMo70son-ei/60/Pc/cl/220 MontReAl 70W son-ei 60MM Pc cleAR +220 lAMP

nMo70hQi-e/60/Pc/cl/740 MontReAl 70W hQi-e 60MM Pc cleAR +740 lAMP

nMo100hQi-e/60/Pc/cl/740 MontReAl 100W hQi-e 60MM Pc cleAR +740 lAMP

nMo142Plt/60/Pc/cl/840 MontReAl 1X42W Plt 60MM Pc cleAR +840 lAMPTOP MOUNTBOTTOM MOUNT

CONSTRUCTION- PBt body- Polycarbonate sides, opal (without

louvre) or clear (with louvre)- stainless steel louvre- All supplied with gear- Weight:

- 70W 5.4Kg- 100W 5.7Kg- 42W 4.1Kg

- Windage = 0.15m2

OPTIONS- Side panel material. choice of

opal (o) with no louvre fitted(as shown), or clear (cl) withstainless-steel louvre


SPECIFICATION- supplied with premium

brand lamp:- son-ei 70W col 220- hQi 70W & 100W col 740- Plt 1x42W col 840



LEYHILLVandal and corrosion

resistant post-top fitting forleD or hiD sources.

CONSTRUCTION- Black polypropylene base and lid- 5mm thick polycarbonate

controller/diffuser- integral steel gear tray with

readily accessible connections- Weight:

- leD 4.00Kg- 50W/70W hQi 4.5Kg- 100W/150W hi 6.00Kg

- Windage:- standard 0.16m2

- large 0.30m2

APPLICATIONS- Parks, car-parks and

housing estates- sea-fronts and coastal areas

SPECIFICATION- two leD variants available,

2,500lm and 4,800lm.supplied with driver.

- Metal halide versions available,50W, 70W, 100W and 150W,all with magnetic gear.

- For 76mm spigot mounting.

169

EXTERIOR

lig

ht

ing

www.nvcuk.com

|+44(0)121457

6340

OPTIONS- Diffuser. supplied with clear

reeded controller as listed. Foropal diffuser, replace suffix clwith o.

- Standard or large. Available intwo sizes, as listed.

- Photo-cell. Dusk/dawnphoto-cell available.Add suffix Pec.

- NEMA socket. Available withneMA socket (only) fitted.Add suffix neMA.


nlh2500/leD/cl/840 leYhill 2500 lM leD cleAR col 840

nlh4800/leD/cl/840 leYhill 2500 lM leD cleAR col 840

nlh50hQi-e/cl/740 leYhill 50W hQi cleAR + 740 lAMP

nlh70hQi-e/cl/740 leYhill 70W hQi cleAR + 740 lAMP

nlh100hQi-e/lg/cl/740 leYhill 100W hQi lARge cleAR + 740 lAMP

nlh150hQi-e/lg/cl/740 leYhill 150W hQi lARge cleAR + 740 lAMP


www.nvcuk.com

|+44(0)121457

6340

EXTERIOR

lig

ht

ing

LAWRENCE170

Vandal resistant square bulkhead for hiD and Pl lamps.

315

315

233 230

230


nlA70son-ei/220 lAWRence 70W son WAll PAcK+220 lAMP

nlA70son-ei/Pec/220 lAWRence 70W son WAll PAcK+Pe cell+220 lAMP

nlA70hQi-e/740 lAWRence 70W hQi WAll PAcK+740 lAMP

nlA70hQi-e/Pec/740 lAWRence 70W hQi WAll PAcK+Pe cell+740 lAMP

nlA150hQi-e/740 lAWRence 150W hQi WAll PAcK+ 40 lAMP

nlA150hQi-e/Pec/740 lAWRence 150W hQi WAll PAcK+Pe cell+740 lAMP

nlA226/hF/840 lAWRence 2X26W Pl hF WAll PAcK+840 lAMP

nlA226/hF/Pec/840 lAWRence2X26WPlhFWAllPAcK+Pe cell+840lAMP


nlA232/hF/Pec/840 lAWRence 2X32W Pl hF WAll PAcK+Pe cell+840 lAMP


nlA242/hF/Pec/840 lAWRence2X42WPlhFWAllPAcK+Pe cell+840lAMP

CONSTRUCTION- heavy duty die cast

aluminium housing- Dark bronze textured powder

coated finish- clear reeded polycarbonate cover- 1 x 20mm cable entries at rear

centre, bottom centre and oneach side


available on Pl versions only.Add suffix M3.

- Photo-cell. Dusk/dawn photo-cellavailable. suffix Pec

APPLICATIONS- Building perimeters- Paths and pedestrian

access areas- security lighting

SPECIFICATION- 70W son with magnetic

control gear- 70W & 150W hQi with

magnetic control gear- twin lamp 26W, 32W & 42W Pl

with high-frequency control gear- All variants supplied with

premium brand lamps- 70W son-ei, colour 220- 70W & 150W hQi, colour 740- Pl lamps, colour 840


BAFFINVandal resistant fitting for hiD and Pl lamps.

SPECIFICATION- 70W son and metal halide or- twin lamp 26W, 32W,

42W Pl with high-frequencycontrol gear

- All variants supplied withpremium brand lamps- 70W son-ei, colour 220- 70W hQi, colour 740- Pl, colour 840

- Prismatic polycarbonate cover

171

EXTERIOR

lig

ht

ing

www.nvcuk.com

|+44(0)121457

6340


aluminium housing- internal gear tray for ease

of maintenance- tough polycarbonate cover- Dark bronze textured finish- 1 x 20mm cable entries at rear

centre and on each of 3 sides


available on Pl versions only.Add suffix M3.

- Photo-cell. Dusk/dawnphoto-cell available. suffix Pec.


nBA70son-ei/220 BAFFin 70W son Anti-VAnDAl + 220 lAMP

nBA70son-ei/Pec/220 BAFFin 70W son Anti-VAnDAl + Pe cell + 220 lAMP

nBA70hQi-e/740 BAFFin 70W hQi Anti-VAnDAl + 740 lAMP

nBA70hQi-e/Pec/740 BAFFin 70W hQi Anti-VAnDAl + Pe cell + 740 lAMP

nBA150hQi-e/740 BAFFin 150W hQi Anti-VAnDAl + 740 lAMP

nBA150hQi-e/Pec/740 BAFFin 150W hQi Anti-VAnDAl + Pe cell + 740 lAMP

nBA226/hF/840 BAFFin 2X26W Pl hF Anti-VAnDAl + 840 lAMP

nBA226/hF/Pec/840 BAFFin2X26WPlhFAnti-VAnDAl+Pecell+840lAMP





315

315

225 230

230

APPLICATIONS- Pedestrian underpasses- car parks, security lighting- Under-canopy lighting


www.nvcuk.com

|+44(0)121457

6340

EXTERIOR

lig

ht

ing

ELLESMERE172

Robust wall sconce for hiD and Pl lamps.

234 460

230

5962

62WALL FIXING

PLATE


nel70son-ei/220 ellesMeRe 70W son WAll sconce+220 lAMP

nel70hQi-e/740 ellesMeRe 70W hQi WAll sconce+740 lAMP

nel150hQi-e/740 ellesMeRe 150W hQi WAll sconce+740 lAMP

nel226/Pl/hF/840 ellesMeRe 2X26W Pl hF WAll sconce+840 lAMP



nel126/Pl/hF/Ft/840 ellesMeRe 1X26W Pl hF WAll sconce FRD thRoW+840 lAMP



SPECIFICATION- 70W son and hQi, 150W hQi

with wide angle or forward throw(Ft) reflector

- twin lamp Pl with hF gear andwide-angle reflector

- single lamp Pl with hF gear andforward throw (Ft) reflector

- All variants supplied with premiumbrand lamps- 70W son-ei, colour 220- 70W and 150W hQi, colour 740- Pl, colour 840


aluminium housing- Dark bronze textured finish


available on single lamp Plversions only. Add suffix M3.

- Reflectors. hiD versionssupplied with wide-anglereflector as listed, or forforward throw reflector addsuffix Ft. single lampPl supplied with forwardthrow reflector and twinlamp Pl with wide-angle reflector.

APPLICATIONS- Building perimeters- Paths and pedestrian

access areas

Adjustable mountingplate for easy and

accurate installation


BEAUFORTBulkhead fitting in 2 sizes for hiD and Pl lamps.

SPECIFICATION- 70W, 150W, 250W and

400W son and hQi or- twin lamp 42W Pl with hF gear- supplied with premium brand lamps

- 70W son-ei, colour 220- 150W, 250W and

400W son, colour 220- 70W, 150W, 250W and

400W hQi, colour 740- 42W Pl, colour 840

APPLICATIONS- Pedestrian underpasses- car parks

173

EXTERIOR

lig

ht

ing

www.nvcuk.com

|+44(0)121457

6340


aluminium housing- toughened borosilicate glass

cover, hinged and withretaining straps

- Dark bronze textured finish

OPTIONS- Emergency. sorry, no emergency

versions are available.- Photo-cell. Dusk/dawn

photo-cell available. suffix Pec- Wire guard. Available to be

ordered as a separate item.

oRDeR coDe DescRiPtion (sMAll siZe)

nBe70son-ei/220 BeAUFoRt 70W son WAll PAcK + 220 lAMP

nBe70hQi-e/740 BeAUFoRt 70W hQi WAll PAcK + 740 lAMP


AttAchMents


nBe/Wg/70-150 BeAUFoRt WiRe gUARD FoR 70W hiD & Pl

nBe/Wg/250-400 BeAUFoRt WiRe gUARD FoR 250-400 hiD

oRDeR coDe DescRiPtion (lARge siZe)

nBe150son-e/220 BeAUFoRt 150W son WAll PAcK + 220 lAMP





nBe242/hF/840 BeAUFoRt2X42WPlhFWAllPAcK+840lAMP

205

303

47

282 203 230

420

335

190

79

273 320


www.nvcuk.com

|+44(0)121457

6340

EXTERIOR

lig

ht

ing

BRONX LED174

iP65 die-cast aluminium andpolycarbonate leD bulkhead.

SPECIFICATION- 31W. 2,611 lumens- 84 l.lm/cW- 4,000. cRi >.8

CONSTRUCTION- Die-cast aluminium base- Polycarbonate cover, hinged

and retained with stainlesssteel screws

OPTIONS- Emergency. Please check

availability before ordering.- Photo-cell. Dusk/dawn

photo-cell available. suffix Pec.


nBX2700/leD/840 BRonX 2700 lUMen 30W leD WAll PAcK

nBX2700/leD/Pec/840 BRonX 2700 lUMen 30W leD WAll PAcK +Pe cell

APPLICATIONS- commercial and

industrial buildings- Perimeter lighting- Pedestrian and vehicular

access areas


BRONXiP65 polycarbonate bulkhead fitting hiD and Pl lamps.

SPECIFICATION- 70W son-ei and hQi-e- 26W and 42W Pl- supplied complete with lamps

- 70W son-ei - unbranded lampwith integral ignitor, colour 220

- 70W hQi - european brand lamp,colour 740

- Pl - european brand lamp,colour 840

- Pl versions with high frequencycontrol gear

APPLICATIONS- commercial and

industrial buildings- Perimeter lighting- Pedestrian and vehicular

access areas

175

EXTERIOR

lig

ht

ing

www.nvcuk.com

|+44(0)121457

6340

CONSTRUCTION- Polycarbonate base & eyelid- Polycarbonate controller


available as listed. suffix M3.- Photo-cell. Dusk/dawn

photo-cell available.Add suffix Pec


nBX70son-ei/220 BRonX 70W son WAll PAcK +220 lAMP

nBX70hQi-e/740 BRonX 70W Mh WAll PAcK +740 lAMP

nBX226/Pl/hF/840 BRonX 2X26W Pl hF WAllPAcK +840 lAMPs

nBX226/Pl/hF/M3/840 BRonX2X26W Pl hF WAllPAcK M3 +840 lAMPs

nBX142/Pl/hF/840 BRonX 1X42W Pl hF WAllPAcK +840 lAMP

nBX142/Pl/hF/M3/840 BRonX1X42W Pl hF WAllPAcK M3 +840 lAMPs


www.nvcuk.com

|+44(0)121457

6340

EXTERIOR

lig

ht

ing

YUKON176

iP65 rated die cast aluminium road lantern for leD,cosmo and 70 - 150W hiD lamps.

OPTIONS- Cover. Flat glass as standard.

For clear polycarbonate addsuffix Pc

- Photo-cell. Add suffix Pec.

APPLICATIONS- Minor roads- car parks- Pedestrian areas

CONSTRUCTION- Die cast aluminium body- All external fastenings in

stainless steel- 5mm toughened flat glass cover- horizontal or vertical mounting- Weight:

- leD 7.0Kg- hiD 5.5 - 9.0Kg

- Windage: 0.12m2

SPECIFICATION- three light sources available:

1. leD – 4 variants available:- 11W – 1,100lm- 18W – 1,800lm- 33W – 3,000lm- 50W – 4,500lm

2. Philips cosmopolis, 45W, 60W,90W and 140W, all with Philipscosmopolis electronic controlgear and lamp.

3. conventional hiD. Metal halide70W and 150W and son 70W,all with magnetic gear andeuropean brand lamp.


nYU11/leD/740 YUKon 11W leD RoAD lAnteRn




nYU45/cos/728 YUKon 45W cosMo ecg + 728 lAMP




nYU70/son-ei/220 YUKon 70W son-ei + 220 lAMP

nYU70/hQi-e/740 YUKon 70W hQi-e + 740 lAMP

nYU150/hQi-e/740 YUKon 150W hQi-e + 740 lAMP

445

270

143

190

0° ONLY

Ø38

-Ø50

0°, 5° & 10°SETTINGS

Ø38-Ø63

VERTICAL MOUNTING

HORIZONTAL MOUNTING


ALBERTAiP65 rated road lantern for leD,

cosmo and 70 - 250W hiD lamps.

177

EXTERIOR

lig

ht

ing

www.nvcuk.com

|+44(0)121457

6340

OPTIONS- Cover. Flat glass as standard.

For clear polycarbonate addsuffix Pc

- Photo-cell. Add suffix Pec.

631

340

287 +15 TO -5°

SETTINGSØ60-Ø76

+5 TO -15°SETTINGS

Ø60

-Ø76


nAB40/leD/755 AlBeRtA 40W leD RoAD lAnteRn

nAB45/cos/728 AlBeRtA 45W cosMo ecg + 728 lAMP




nAB70son-ei/220 AlBeRtA 70W son-ei + 220 lAMP

nAB150son-e/220 AlBeRtA 150W son-ei + 220 lAMP

nAB250son-e/220 AlBeRtA 250W son-ei + 220 lAMP

nAB70/hQi-e/740 AlBeRtA 70W hQi-e + 740 lAMP



APPLICATIONS- Minor roads- car parks- Pedestrian areas

CONSTRUCTION- grey glass filled nylon body- All external fastenings in

stainless steel- 5mm toughened flat glass cover- horizontal or vertical mounting,

adjustable angle- Windage = 0.18m2

SPECIFICATION- three light sources available:

1. leD, 40W.50,000 hrs estimated life

2. Philips cosmo, 45, 60, 90 and140W with Philips cosmopoliselectronic control gear and lamp.

3. conventional hiD. Metal halideand son 70W, 150W and 250W,all with magnetic gear andeuropean brand lamp.


www.nvcuk.com

|+44(0)121457

6340

EXTERIOR

lig

ht

ing

RYDER178

iP66 rated die cast aluminium leD road lanternwith Philips Xitanium driver.

OPTIONS- Available with neMA socket

base fitted if required.suffix neMA

PHOTOMETRICSRYDeR 59W leD complieswith s4 as follows:- 30m spacing, one side only- 6m columns- 9m roadway- 0.85 maintenance factor

Full photometrics data availableon request.

APPLICATIONS- Minor roads- Residential areas- car parks

SPECIFICATION- 59W total power consumption- 3,760 lumens output- 5,100K colour temperature- Philips Xitanium driver

CONSTRUCTION- Ac3A grade aluminium for

corrosion resistance- single stainless steel latch closure

for easy and tool-free access- light engine and gear tray

detachable via plug/socketconnections

- supplied complete with76-63mm spigot adaptor

- Weight = 11.8Kg- Windage = 0.13m2


nRY59/leD/751 RYDeR 59W leD RoAD lAnteRn

nRY59/leD/neMA/751 RYDeR 59W leD RoAD lAnteRn + neMA BAse

leD

internal detail


SU

RFA

CE

&S

US

PE

ND

ED

LIG

HTI

NG

CO

NT

EN

TS

FLO

ODLI

GHT

lig

ht

ing

co

nt

en

ts

DENVERpage 180

TAMPApage 181

ARIZONApage 182

APACHEpage 183

AUSTINpage 184

COLORADOpage 185

NEW YORKpage 186

MANITOBApage 187

MUNROEpage 188

MINNESOTApage 189

MOLSONpage 190

MATLOCKpage 191

NVC_FLOODLIGHT.qxp:FLOODLIGHT 22/4/13 17:46

ww

w.n

vcuk

.com

|+44

(0)1

21457

634

0FL

OO

DLI

GHT

lig

ht

ing

DENVER180

iP65 aluminium 70W and 140W leD floodlight fittings.

LED v Metal Halide - How do they compare?

DenVer 70W light output is similar to 150W metal halide.

DenVer 140W light output is similar to 250W metal halide.

For more detail, please consult your nVc sales engineer.

orDer coDe DescriPtion

nDn6300/leD/757 DenVer 6300 lumen 70W leD FlooDlight iP65

nDn6300/leD/24V/757 DenVer 6300 lumen 70W leD FlooDlight 24V Dc iP65

nDn12600/leD/757 DenVer 12600 lumen 140W leD FlooDlight iP65

CONSTRUCTION- aluminium extruded body

with diecast end caps andbreather valve

- toughened glass cover removablefor maintenance

- Pre-wired with 10m of3 x 1.5mm ho7 flex

- Weight:- 70W 7.40kg- 140W 11.2kg

- Windage:- 70W 0.13m2

- 140W 0.18m2

APPLICATIONS- industry and warehouses- general purpose floodlighting- situations where maintenance

is expensive or impractical

SPECIFICATION- leD 6,300lm and 12,600lm

with integral driver- guaranteed 2 years from

installation date- suitable for use to -40˚c

OPTIONS- 24V DC. Variants available

enquire for details.- Extras. large stirrup bracket for

post-top applications available,listed below.

- For post mounting accessories,see page 194-195

accessories


nDn6300/brky/Post-toP DenVer 6300 lumen 70W Post toP mounting bracket

nDn12600/brky/Post-toP DenVer 12600 lumen 140W Post toP mounting bracket

stirrup bracket forpost-top mounting


TAMPAiP65 slim aluminium diecast asymmetric floodlights

for 70W & 150W metal halide lamps.

CONSTRUCTION- aluminium diecast body and cover- available in a choice of 3 light

textured colours:- matt grey, as standard- matt white (Wh)- matt black (bk)

- hinged single-piece coverretained on stainless steel screws

- Polished aluminium reflectorwith dimpled finish

APPLICATIONS- signage- Fascias

SPECIFICATION- 70W and 150W metal halide

double ended lamp- supplied complete with leading

brand colour 740 lamp- asymmetric distribution


nta70hQi-De/740 tamPa 70W mh grey slim alu FlooD + lamP

nta150hQi-De/740 tamPa 150W mh grey slim alu FlooD + lamP

nta70hQi-De/Wh/740 tamPa 70W mh White slim alu FlooD + lamP

nta150hQi-De/Wh/740 tamPa 150W mh White slim alu FlooD + lamP

nta70hQi-De/bk/740 tamPa 70W mh black slim alu FlooD + lamP

nta150hQi-De/bk/740 tamPa 150W mh black slim alu FlooD + lamP

181

FLO

ODLI

GHT

lig

ht

ing

ww

w.n

vcuk

.com

|+44

(0)1

21457

634

0

- Weight:- 70W 3.35kg- 150W 4.35kg

- Windage = 0.08m2

- For post mounting accessories,see page 194-195

available in 3 colours


ww

w.n

vcuk

.com

|+44

(0)1

21457

634

0FL

OO

DLI

GHT

lig

ht

ing

ARIZONA182

iP65 aluminium diecast symmetricflood for 150-400W hiD lamps.

34 x 10OBR SLOTØ10

Ø20

100100

STIRRUP FIXING DETAILS

420147

515

245

WITH PCCOVERFITTED

405

orDer coDe DescriPtion Weight kg

naZ150son-t/220 ariZona 150W son bk FlooD + lamP 6.45



naZ250hQi-t/740 ariZona 250W hQi bk FlooD +lamP 6.5

naZ400hQi-t/740 ariZona 400W hQi bk FlooD + lamP 7.3

naZ150son-t/Wh/220 ariZona 150W son Wh FlooD + lamP 6.45



naZ250hQi-t/Wh/740 ariZona 250W hQi Wh FlooD + lamP 6.5

naZ400hQi-t/Wh/740 ariZona 400W hQi Wh FlooD + lamP 7.3

CONSTRUCTION- aluminium diecast body- available in a choice of 2 light

textured colours:- matt black - standard- matt white - suffix Wh

- Polished aluminium reflectorwith dimpled finish

- Windage = 0.16m2

APPLICATIONS- area floodlighting- industrial premises- Warehousing

SPECIFICATION- son-t 150W, 250W and 400W- hQi-t 250W and 400W- supplied complete with leading

brand lamp. son col 220,hQi col 740

- symmetric distribution- Digital timed ignitor

OPTIONS- Photo-cell. Dusk/dawn photo-cell

available. add suffix Pec- PC cover. Polycarbonate cover

available for food processingapplications. add suffix Pc.

- Extras. For post mountingaccessories, see page 194-195

available in 2 colours,black and white


APACHEiP65 aluminium diecast 110v floods for 150-400W metal halide lamps.

CONSTRUCTION- aluminium diecast body- yellow powder coated finish- Polished aluminium reflector

with dimpled finish- Weight and Windage:

150W hQi 5.25kg 0.09m2

250W hQi 7.5 kg 0.16m2

400W hQi 8.4kg 0.16m2

APPLICATIONS- construction sites

SPECIFICATION- 150W

- metal halide double-ended lamp- asymmetric distribution

- 250-400W- metal halide tubular e40 lamp- symmetric distribution

- supplied complete with leadingbrand col 740 lamp

- magnetic gear- For 110v 50hz supply


naP150hQi-De/740 aPache 150W mh 110V yelloW FlooD + lamP

naP250hQi-t/740 aPache 250W mh 110V yelloW FlooD + lamP

naP400hQi-t/740 aPache 400W mh 110V yelloW FlooD + lamP

APACHE 250W/400WAPACHE 150W

183

FLO

ODLI

GHT

lig

ht

ing

ww

w.n

vcuk

.com

|+44

(0)1

21457

634

0

OPTIONS- Extras. For post mounting

accessories, see page 194-195

aPache 150W

aPache250W - 400W


ww

w.n

vcuk

.com

|+44

(0)1

21457

634

0FL

OO

DLI

GHT

lig

ht

ing

AUSTIN184

iP65 polycarbonate floodlight with 70W son lamp.

377

243 207

298


nau70son-ei/220 austin 70W son Poly-c FlooD +220 lamP

nau70son-ei/Pec/220 austin 70W son Poly-c FlooD+Pe cell +220 lamP

CONSTRUCTION- moulded polycarbonate body

and front cover- Polished aluminium reflector

with dimpled finish- supplied complete with

cable gland- Weight: 4.0kg- Windage = 0.07m2

APPLICATIONS- signage- general purpose floodlighting- construction sites- temporary installations

SPECIFICATION- 70W son-ei- supplied with lamp- symmetric distribution

OPTIONS- Photo-cell. Dusk/dawn photo-cell

available. suffix Pec- Extras. For post mounting

accessories, see page 192


COLORADOiP65 aluminium diecast asymmetric flood for

250W and 400W hiD lamps.

CONSTRUCTION- aluminium diecast body- matt grey light textured finish- one-piece easy-access cover.

no tools required.- Polished aluminium reflector with

dimpled finish.- Weight and Windage:

250W son 9.85kg 0.17m2

400W son 11.20kg 0.17m2

250W hQi 8.90kg 0.17m2

400W hQi 9.80kg 0.17m2

APPLICATIONS- building façade illumination- small sports grounds

SPECIFICATION- son-t 250W and 400W- hQi-t 250W and 400W- supplied with leading brand lamp- asymmetric distribution


nco250son-t/220 coloraDo 250W son alu FlooD +220 lamP

nco400son-t/220 coloraDo 400W son alu FlooD +220 lamP

nco250hQi-t/740 coloraDo 250W mh alu FlooD +740 lamP

nco400hQi-t/740 coloraDo 400W mh alu FlooD +740 lamP

185

FLO

ODLI

GHT

lig

ht

ing

ww

w.n

vcuk

.com

|+44

(0)1

21457

634

0

OPTIONS- Photo-cell. Dusk/dawn

photo-cell available.add suffix Pec

attachments


nco/Wg coloraDo Wire guarD

Detail of clipssecuring glass cover

colorado wire guard


ww

w.n

vcuk

.com

|+44

(0)1

21457

634

0FL

OO

DLI

GHT

lig

ht

ing

NEW YORK186

iP65 Pbt floods for 70W, 150W, 250W and 400W hiD lamps.


nny70hQi-De/740 neW york 70W mh Pbt FlooD + 740 lamP

nny150hQi-De/740 neW york 150W mh Pbt FD.light + 740 lamP

nny250son-t/220 neW york 250W son Pbt FlooD + 220 lamP

nny400son-t/220 neW york 400W son Pbt FlooD + 220 lamP

nny250hQi-t/740 neW york 250W mh Pbt FlooD + 740 lamP

nny400hQi-t/740 neW york 400W mh Pbt FlooD + 740 lamP

APPLICATIONS- salt-laden environments and coastal areas, including:

- building signage illumination- Perimeter and security lighting- general amenity use

CONSTRUCTION- Polybutylene therephthalate (Pbt) body for salt

and pollution resistance- black self-colour finish- stainless steel mounting bracket- one-piece toughened glass cover on Pbt hinges- 3 body sizes with weights as follows:

- Small body- 70W hQi 3.75kg- Windage = 0.07m2

- Medium body- 150W hQi 6.75kg- Windage = 0.13m2

- Large body- 250W son 9.00kg - 250W hQi 9.00kg- 400W son 11.20kg - 400W hQi 10.00kg- Windage = 0.19m2

SPECIFICATION- hQi 70W, 150W, 250W and 400W- son 250W and 400W- supplied with european brand lamp- 70W/150W symmetric distribution- 250W/400W asymmetric distribution

OPTIONS- Photo-cell. Dusk/dawn photo-cell available on all

versions except for 70W. add suffix Pec- Extras. For mounting accessories, see pages 194-195

neW york 70Wsymmetric

neW york 150Wsymmetric

160

30

3-Ø11

240 115

370

290

325 127

500

400

215

50

3-Ø15.5

420 170

530

450

285

50

3-Ø15.5

neW york 250W - 400Wasymmetric

sPares


nny/brkt/250-400/3.5mm neW york mounting bracket 250-400W

new york70W

new york150W

new york250 - 400W


MANITOBAiP65 aluminium diecast flood for 1000W son and hQi lamps.

CONSTRUCTION- aluminium diecast body- matt grey textured powder

coated finish- timed ignitor integral to body- ballast and capacitors

remote mounted- Polished dimpled aluminium reflector- Weight (enclosure with ignitor)

= 9.5kg- Windage = 0.27m2

APPLICATIONS- sports grounds- large public areas

SPECIFICATION- son-t and hQi-t 1000W- supplied with premium brand lamp- asymmetric distribution- timed ignitor


nma1000son-t/220 manitoba 1000W son alu FlooD encl gear +220lamP

nma1000hQi-t/740 manitoba 1000W hQi alu FlooD encl gear +740lamP

nma1000son-t/lg/220 manitoba 1000W son alu FlooD loose gear +220lamP

nma1000hQi-t/lg/740 manitoba 1000W hQi alu FlooD loose gear +740lamP

nma1000/io manitoba 1000W son alu FlooD boDy & ignitor only

nma1000/ng manitoba 1000W son alu FlooD boDy only no gear90170

205355

550

493

68090

187

FLO

ODLI

GHT

lig

ht

ing

ww

w.n

vcuk

.com

|+44

(0)1

21457

634

0

OPTIONS- available complete with gear

mounted in enclosure orsupplied loose

- available as head with timedignitor only, no gear or lamp

- gear available as separateitems as listed

comPonents & sPares


nma/encl/1000W manitoba control gear 1000W son/hQi steel encl

ncg/son-hQi/1000/Ve ballast 1000W son/hQi hDP002232 Venture

ncg/ign/1000/t/Ve ignitor 1000W timeD mci1000 Venture

ncg/caP/50mF/Ve caPacitor 50mF r1008hP500P25 Venture

ignitor housing



nmu1000hQi-t/Wb/740 munroe 1000W hQi WiDe beam symm FlooD + encl gear & lamP

nmu1000hQi-t/nb/740 munroe1000WhQinarroWbeamsymmFlooD+enclgear&lamP

ww

w.n

vcuk

.com

|+44

(0)1

21457

634

0FL

OO

DLI

GHT

lig

ht

ing

MUNROE188

1000W metal halide symmetric floodlight.

CONSTRUCTION- aluminium die-cast body with

integral mounted ignitor- ballast and capacitor remotely

mounted and supplied in iP65die-cast aluminium enclosure(pictured)

- Polished dimpled aluminiumreflector (wide beam) and plainpolished reflector (narrow beam)

- heavy duty steel stirrupmounting bracket

- Weight (body & ignitor only) = 9.00kg- Windage = 0.29m2

APPLICATIONS- sports lighting

SPECIFICATION- metal halide 1000W- 230v- e40 lampholder. supplied

including colour 740 lamp- Digital timed ignitor

OPTIONS- Beam angle. choice of wide and

narrow beam, as listed.

gear supplied in an iP65die-cast enclosure


MINNESOTAiP65 aluminium die cast flood

for 2000W metal halide lamps.

CONSTRUCTION- aluminium die cast body with

integral mounted ignitor- ballast and capacitor

remotely mounted- Polished aluminium reflector with

dimpled finish- Weight = 20.0kg- Windage = 0.39m2

APPLICATIONS- sports grounds

SPECIFICATION- hQi 2000W- 415V as standard.

For 230V add suffix 230- k12s lampholders for short arc lamp- supplied with premium brand

lamp and gear- timed ignitor- asymmetric distribution

189

FLO

ODLI

GHT

lig

ht

ing

ww

w.n

vcuk

.com

|+44

(0)1

21457

634

0

OPTIONS- Gear. available with gear

mounted in steel enclosure orsupplied loose. gear listed isall 415V. For 230V gear addsuffix 230

- Head only. available as headwith timed ignitor only,no gear or lamp.


nmn2000hQi-t/645 minnesota 2000W hQi alu FlooD encl gear +645lamP

nmn2000hQi-t/lg/645 minnesota2000WhQialuFlooDloosegear+645lamP

nmn2000/io minnesota 2000W hQi alu FlooD boDy & ignitor only

nmn2000/ng minnesota 2000W hQi alu FlooD boDy only no gear

comPonents & sPares


nmn/housing minnesota housing emPty lan 28018

nmn/encl/2000W minnesota control gear 2000W son/hQi encl

ncg/son-hQi/2000/Ve ballast2000WhQihZV943383Venture

ncg/ign/2000/t/Ve ignitor 2000W timeD Pct150485 Venture

ncg/caP/45mF/Ve caPacitor 45mF r1008hP450n3 Venture

385

310 150

28 ø15150

755

630



nms1000hQi-t/3/740 molson 1000W hQi 230V 3° ProJector + encl gear & lamP




nms1000hQi-t/3/V/740 molson1000WhQi230V3°ProJectorVertical+enclgear&lamP




ww

w.n

vcuk

.com

|+44

(0)1

21457

634

0FL

OO

DLI

GHT

lig

ht

ing

MOLSON190

narrow beam floodlight for 1000Wand 2000W metal halide lamps.

CONSTRUCTION- Die-cast aluminium body with

breather-valve- gear supplied in separate die-cast

aluminium iP65, class i enclosure- mounting bracket made of

zinc plated steel- Weight: 13kg (excluding gear)- Windage: 0.2m2

APPLICATIONS- sports grounds- building exteriors

SPECIFICATION- For tubular metal halide lamps.

supplied including lamp- 1000W – 230V, 5X7s.

2000W – 415V, k12s- 3˚x2 or 7˚x2 beam angles,

as listed

OPTIONS- standard version suitable for

mounting pointing up to > 15˚from vertical. For mountingpointing up at <15˚ from vertical,special glass and wire guard isrequired. use suffix V as listedfor version including these items

- kit of ceramic glass and wireguard available as spares

- body available empty as listed

comPonents & sPares


nms/housing/1000W/3 molson housing emPty 1000W 3° c/W ignitor boX

nms/housing/1000W/7 molson housing emPty 1000W 7°c/W ignitor boX



nms/glass+guarD molson ceramic glass + circular Wire guarD

Vertical mounting versionsupplied with ceramicglass and wire guard



MATLOCKasymmetric floodlight for 2000W metal halide lamps.

CONSTRUCTION- Die-cast aluminium body with

breather-valve- gear supplied in separate die-cast

aluminium iP65, class i enclosure- mounting bracket made of

zinc plated steel- Weight: 15kg (excluding gear)- Windage: 0.33m2

191

FLO

ODLI

GHT

lig

ht

ing

ww

w.n

vcuk

.com

|+44

(0)1

21457

634

0

OPTIONS- body available empty as listed

APPLICATIONS- sports grounds- building exteriors

SPECIFICATION- For tubular metal halide lamps.

supplied including lamp- 2000W – 415V, k12s- 45˚ and 60˚ beam angles



nml2000hQi-t/45/645 matlock 2000W 415V hQi assym 45° FlooD + encl gear & lamP

nml2000hQi-t/60/645 matlock 2000W 415V hQi assym 60° FlooD + encl gear & lamP

comPonents & sPares


nml/housing/2000W/45 matlock housing emPty 2000W 45° c/W ignitor boX

nml/housing/2000W/60 matlock housing emPty 2000W 60° c/W ignitor boX


ww

w.n

vcuk

.com

|+44

(0)1

21457

634

0FL

OO

DLI

GHT

lig

ht

ing

192


SU

RFA

CE

&S

US

PE

ND

ED

LIG

HTI

NG

CO

NT

EN

TS

ACCESSORIES

co

nt

en

ts

POST TOPACCESSORIES

page 194

COLUMNS ANDCUT-OUTS

page 196

LED LAMPSpage 197

PL LAMP HOLDERSpage 198

LOW VOLTAGETRANSFORMER

page 198

PHOTO-CELLSpage 198

NVC_ASSC.qxp:ACCESSORIES 22/4/13 17:49

www.nvcuk.com

|+44(0)121

457

634

0ACCESSORIES

194

POST TOP ACCESSORIESA range of accessories for exterior lighting is available. they are all made of mild steel,galvanised to Bs729. Where supplied, all fasteners are made of stainless steel.

the most popular items are listed here, but more are available. Please enquire for details.

ø60

ø76 INT

600

ø76 INT

ø60 TYP

oRDeR coDe DescRIPtIon

nsR/76-60/eXt sPIGot ReDUceR76-60MM eXteRnAL

ø60

ø80


nsR/76-60/Int sPIGot ReDUceR76-60MM InteRnAL

150

150

ø60


nPtB/Wt/1/60 Post toP BRAcKetWALL toP 1X60MM


nPtB/76/2/600/60 Post toP BRAcKet 76 2 oFF 600X60MM ARMsnPtB/76/3/600/60 Post toP BRAcKet 76 3 oFF 600X60MM ARMsnPtB/76/4/600/60 Post toP BRAcKet 76 4 oFF 600X60MM ARMs

POST TOP ACCESSORIES

nPtB/76/4/600/60

nPtB/76/2/600/60

nPtB/76/3/600/60

300

ø76 INT

ø485˚

300 300

ø76 INT

ø485˚

200

ø4815˚

200

ø6015˚

ROAD LIGHT ACCESSORIES


nRLB/cW/1/200/48 RoAD LIGHt BRAcKet coRn/WALL 1 oFF 200X48MM ARM


nRLB/cW/1/200/60 RoAD LIGHt BRAcKet coRn/WALL 1 oFF 200X60MM ARM


nRLB/76/1/300/48 RoAD LIGHt BRAcKet 76MM coL 1 oFF 300X48MM ARM


nRLB/76/2/300/48 RoAD LIGHt BRAcKet 76MM coL 2 oFF 300X48MM ARM

nRLB/76/1/300/48 nRLB/76/2/300/48

nRLB/cW/1/200/48 nRLB/cW/1/200/60


195

ACCESSORIES

www.nvcuk.com

|+44(0)121

457

634

0

FLOOD LIGHT ACCESSORIESAll floodlights up to and including 400W fit nFB/1/76, nFB/sMP and

nF/sMP/cLAMP except for neW YoRK and coLoRADo. Accessories with thesuffix nY have additional drillings and are universal - suitable for all nVc flood lights

including neW YoRK and coLoRADo.

For 1000W and 2000W floodlights specialist accessories will be required.Please contact us for assistance.

146 240ø76 INT

ø76 INT

626

300 125

200

240

100

240

ø76

150

310

ø76

150


nFB/1/76 FLooD BRAcKet 1X76MM coLnFB/1/76/nY FLooD BRAcKet 1X76MM coL


nFB/2/76 FLooD BRAcKet 2X76MM coLnFB/3/76 FLooD BRAcKet 3X76MM coL


nFB/W/300 FLooD BRAcKet WALL


nFB/sMP stIRRUP MoUntInG PLAtenFB/sMP/nY stIRRUP MoUntInG PLAte


nFB/sMP/cLAMP stIRRUP MoUntInG PLAtePoLe cLAMP

nFB/sMP/cLAMP/nY stIRRUP MoUntInG PLAtePoLe cLAMP

FLOOD LIGHT ACCESSORIES

nFB/1/76

nFB/sMP nFB/sMP/nY nFB/sMP/cLAMP nFB/sMP/cLAMP/nY

nFB/1/76/nY


www.nvcuk.com

|+44(0)121

457

634

0ACCESSORIES

196

COLUMNSCOLUMNS MID-HINGED COLUMNS

AB

BASE COMPARTMENT3-6M = 100 x 5008M = 115 x 600

75 x 150 CABLEENTRY SLOT

3-6M = Ø768M = Ø89

3-6M = Ø1408M = Ø168

800

800

800

B

5M

4M

3M

HEIGHT

5000

4000

3000

A

10006M 6000

12008M 8000

AB

BASE COMPARTMENT100 x 500

75 x 150 CABLEENTRY SLOT

Ø76

Ø140

800

800

B

5M

4M

HEIGHT

5000

4000

A

10006M 6000

HINGE


ncoL/3/76 coLUMn GALV steeL Root 3M X 76MM






ncoL/MH/4/76 coLUMn GALV steeL MID-HInGe Root 4M X 76MM




ncUtoUt 2-PoLe cUt-oUt 2X20MM nt06/ttG12 Less Lst FUse


LED LAMPSA range of energy saving LeD lamps, designed to

replace conventional GU10 incandescent lamps.

- Long life. nVc star LeDlamps have a rated life of30,000 hours, comparedwith a conventional GU10,most of which have a rated lifeof c 2,500 hours

- Guarantee. nVc star LeD lampsare guaranteed for 2 years.

- Energy saving. nVc star LeDlamps deliver c 50 lumens/W,compared with a conventionalGU10 lamp which delivers lessthan 20 lumens/W.

- Cool running.

197

ACCESSORIES

www.nvcuk.com

|+44(0)121

457

634

0

SPECIFICATION- 4W, 5W & 7W- choice of 3000K and 4000K

colour temperatures- 30° beam angle- non-dimmable

4W LeD lamp

5W LeD lamp

7W LeD lamp

compared with equivalent GU10 incandescent lamps, these LeD lampsoffer the following benefits:

oRDeR coDe PoWeR cRI coLoUR(W) teMP K

nLAMP/4/LeD/GU10/730/stAR 4 75 3000





nLAMP/7/LeD/GU10/740/stAR 7 75 4000 Ø50 Ø50 Ø50

52 57.5 71


www.nvcuk.com

|+44(0)121

457

634

0ACCESSORIES

PL LAMP HOLDERS198

LOW VOLTAGE TRANSFORMER

PHOTO-CELLS

PL pendant with 6-pin socketfor 2 and 4 pin 9-18W PL lamps.

NPL9-18PENDANT FOR 2 & 4 PIN9-18W PL LAMPS

PL pendant with 4-pin socketfor 13W lamps only.

NPLP13PENDANT FOR 4 PIN 13WPL LAMPS ONLY

PL pendant with 4-pin socketfor 18W lamps only.

NPLP18PENDANT FOR 4 PIN 18WPL LAMPS ONLY

PL battenholder with 6-pin socketfor 2 and 4 pin 9-18W PL lamps.

NPLB9-18BATTEN HOLDER FOR2 & 4 PIN 9-18W PL LAMPS

- 230-240V, 50/60hZ- 5A switching capacity- 20 lux on, 80 lux off- IP65

NPECKPHOTO-ELECTRIC CELL KIT

- 230-240V, 50/60hZ- 5A switching capacity- 20 lux on, 80 lux off- IP65 when fitted- Dimensions: 52 x 20.5 x 20.5.

17mm clearance hole for installation- Pre-wired with 300mm, 3 cores

NPECRPHOTO-ELECTRIC CELL REMOTE

- 230-240V, 50/60hZ- 5A switching capacity- 20 lux on, 80 lux off- IP65 when fitted- neMA male connector base

NPECHPHOTO-ELECTRIC CELL HEAD

- 230-240V, 50/60hZ- 5A switching capacity- 20 lux on, 80 lux off- IP65 when fitted- neMA male connector base

NPECHPHOTO-ELECTRIC CELL HEAD

- 60VA

- Dimmable with leading edge (triac) dimmers

- Auto-reset short-circuit protection

- thermal cut-out – non resettable

NCG/XFMR/60TRANSFORMER 12V 60VA DIMMABLE


SU

RFA

CE

&S

US

PE

ND

ED

LIG

HTI

NG

CO

NT

EN

TS

TECHNIC

AL

co

nt

en

ts

DIMMINGpage 200

SENSORSpage 201

IP RATINGSpage 204

NVC_TECH.qxp:TECHNICAL 22/4/13 17:52

www.nvc

uk.com

|+44

(0)121

457

634

0TE

CHNIC

AL

DIMMING200

Mains Dimming

Fluorescent fittings and many LeD fittings cannot bedimmed with 50Hz (phase) dimmers. Whether theseare leading or trailing edge dimmers, the control gear ordriver cannot operate correctly if it is switched off for avariable period twice in every mains cycle (which is how

a mains dimmer works, see diagrams below). If mainsdimming (abbreviated to MD) is not mentioned on anypage in this catalogue it should be assumed that thefitting in question is not mains dimmable.

HF Dimming

Many fittings can be dimmed if the correct control gearis used. to do this the control gear is permanentlyconnected to mains power but also receives a dimmingcontrol signal, instructing it to increase or lower thelight output. therefore, dimming fittings always require

extra ways on their terminal block and it is essentialwhen we assemble a fitting that we know what type ofdimming control signal is to be used.

We offer the following options:

Switch Dimswitch dim is a means of controllinga luminaire via a retractive switch.

Dimming on the leading edge Dimming on the trailing edge

L

N

L

N

DALI CONTROL

DA

DA

DEVICE

LUMINAIRETERMINATIONS

TO OTHER LUMINAIRESON SAME CIRCUIT

L

NLSD

L

N

RETRACTIVESWITCH


TO OTHER LUMINAIRESON SAME CIRCUITRETRACTIVE

SWITCH

SwitchDim (SD)

1-10v1-10v analogue dimming can beactuated either with a manuallyoperated potentiometer or a sensor.

1-10V ANALOGUE

L

N

L

N



+-

POTENTIOMETER

DSIcontrol gear operated via a Digitalserial Interface (DsI) is only madeby tridonic. typically, the DsIcontrol signal will be generated by asensor or a lighting control system.

L

N

L

N

DSI CONTROL

D1

D2

DEVICE



Corridor Functioncorridor function can be operatedby an occupancy sensor, timeswitch or manual switch. Whenthe switch contact is “made” thelight output will be 100%; when thecontact is broken the light outputwill be 10%, or some other valuethat may be programmed in thedriver or control gear.

L

NLCF

L

N



CONTROLDEVICE

LIVE OUT (L')

DALIcontrol gear operated via a DigitalAddressable Lighting Interface(DALI) is manufactured by all theleading HF gear manufacturers.typically, the DALI control signalwill be generated by a sensor or alighting control system.

Broadcast DALI has the simplefunctionality of DsI, but theadvantage of offering multi-vendorchoice of control gear.

Corridor Function (CF) DALI (DA)

DSI1-10v Analogue (1-10)


SENSORS201

TECHNIC

AL

www.nvc

uk.com

|+44

(0)121

457

634

0

the sensors listed below are all suitable for ceiling mounting.

Passive Infra-Red (PIR) SensorsPIR devices detect occupancy by sensing the movement of a heat emitting body, such as a person. PIR technologyis generally less expensive than micro-wave technology, but there are risks of false triggering if a fan heater or apiece of office equipment, for example, is within the detection zone.


n/PIR/eBDsPIR ceILInG MoUnt PIR cP c/W LUX & tIMe ADJUst

n/PIR/eBDsPIR-PRM ceILInG MoUnt PIR cP c/W LUX & tIMe ADJUst & IR oVeRRIDe

n/PIRD/eBDsPIR-DD ceILInG MoUnt PIR cP DIGItAL DIM c/W LUX & tIMe ADJUst & IR oVeRRIDe

n/PIR1-10/eBDsPIR-AD ceILInG MoUnt PIR cP 1-10 DIM c/W LUX & tIMe ADJUst & IR oVeRRIDe

n/PIR/eBDsPIR-IP ceILInG MoUnt PIR cP IP55 c/W LUX & tIMe ADJUst

n/eBDsPIR/BB sURFAce MoUnt BAcK BoX FoR eBDsPIR

PASSIVE INFRA-RED OCCUPANCY SENSORSFOR MOUNTING HEIGHTS TO 2.8M

Maintained Light Level Sensorsthe sensors listed here regulate artificial lighting to compensate for changinglevels of natural light. these sensors have no occupancy detection function.

Switching and Dimming CapacitiesAll the above sensors have a switching capacity of 10AX, with the exception of n/PIR/eBDsPIRwhich has a switching capacity of 3A (compact fluorescent) and 6A (linear fluorescent).

Where a sensor has a dimming capacity it can control 10 pieces of DALI control gear, or 20 if therelay is disabled, or 5 if the “DALI-on” facility is enabled. Relay operation and DALI-on are parametersthat can be set during commissioning.


n/MLL/ALc-AD MAIntAIneD LIGHt LeVeL contRoL cP 1-10 DIM

n/MLL/ALc-DD MAIntAIneD LIGHt LeVeL contRoL cP DIGItAL DIMM

MAINTAINED LIGHT LEVEL SENSORS

Micro-Wave Sensors


n/MW/MWs3A-PRM MIcRo-WAVe cP c/W LUX & tIMe ADJUst

n/MWD/MWs3A-DD MIcRo-WAVe cP DIGItAL DIM c/W LUX & tIMe ADJUst

n/MW/MWs3A-DBB sURFAce MoUnt DeeP BAcK BoX FoR MWs3A

MICRO-WAVE OCCUPANCY SENSORSFOR OFFICES & CLASSROOMS


n/PIR/eBDHs-PRM sensoR PIR on/oFF

n/PIR/eBDHs-DD sensoR PIR & MAIntAIneD LIGHt LeVeL DIGItAL DIM

n/PIR/eBDHs-AD sensoR PIR & MAIntAIneD LIGHt LeVeL 1-10V

PASSIVE INFRA-RED OCCUPANCY SENSORSFOR MOUNTING HEIGHTS TO 15M


www.nvc

uk.com

|+44

(0)121

457

634

0TE

CHNIC

AL

SENSORS202

Many of our fittings can be ordered with a sensor integrally fitted.

Below we list the order-code suffixes (eg PIR) that can be used to order a fitting with an integral sensor,the exact meaning of the different suffixes and their availability across our product range.

Please be aware that frequent switching will decrease the life of a fluorescent lamp, and this is especiallyso with 2D lamps. to avoid premature lamp failure you should consider the following:

• set the time delay to as long a period as possible, compatible with the usage of the area and thedesired energy savings.

• consider, where it is available, the use of dim to 10% rather than switch off, when presence is no longerdetected. see cF/MW and cF/PIR below.

• consider the use of LeDs, rather than fluorescent lamps, where these are available. LeDs are not adverselyeffected by frequent switching and we have a large range of 2D style fittings that are also available with LeDs.

INTEGRAL SENSORS WITHOUT DIMMING

tecHnoLoGy PRos AnD cons

PIR - Passive infra red, on/off

• PIR technology senses the movement ofwarm objects

• Line of sight only. on some models thesensor head can be shielded to modify thedetection pattern

• False triggering by heat sources possible

• Most models offer adjustable time, lux-onthreshold, sensitivity and choice of presence/absence detection

PIR is available as an option on thefollowing products:

• RECESSED: InDIAnA, cARMeL

• SURFACE & SUSPENDED: cALIFoRnIA(not all versions)

simple adjustment after installation may be required.

• INDUSTRIAL: oReGon

PEC is available as an option on thefollowing products:

• AMENITY: DAytonA AnD MeMPHIs

• ExTERIOR: BRonX, yUKon, ALBeRtA, RyDeR,LAWRence, BAFFIn, BeAUFoRt

• FLOODLIGHTS: ARIZonA, coLoRADo,AUstIn AnD neW yoRK

MW - Micro-wave, on/off

• MW technology senses the movement of anymoving object

• MW can detect movement round corners andthrough non-metallic solid objects, such asa diffuser

• False triggering by any moving object is a risk

• Most models offer adjustable time, lux-onthreshold and sensitivity

When MW is fitted it makes installation very easy andthe sensor benefits from the IP rating of the luminaire.

PEC - Photo-electric cell

• this technology is used for dusk to dawn operation- switching on as the ambient light level falls andoff as it rises.

this does not provide any degree of dimming,maintained light level or daylight regulation.

MW is available as an option on the followingproducts. Please see the relevant cataloguepage to check that MW is available with thewattage and variant you require:

• RECESSED: BIsMARcK

• SURFACE & SUSPENDED: HARVARD, PRInceton(twin lamp only) and yALe

• AMENITY: All except nAsHVILLeand cLARKsVILLe

AVAILABILIty AnD APPLIcAtIons

IN FITTING, NO DIMMING


www.nvc

uk.com

|+44

(0)121

457

634

0TE

CHNIC

AL

204

DEFINITION OF INGRESS PROTECTION (IP)FoReIGn BoDIes LIQUIDs

FIRst DIGIt seconD DIGIt

0 no PRotectIon 0 no PRotectIon

1 PRotectIon AGAInst tHe InGRess oF 1 PRotectIon AGAInst DRoPs oFoBJects LARGeR tHAn 50MM WAteR FALLInG VeRtIcALLy

2 PRotectIon AGAInst tHe InGRess oF 2 PRotectIon AGAInst DRoPs oF WAteR FALLInGoBJects LARGeR tHAn 12.5MM At Any AnGLe UP to 15˚ FRoM tHe VeRtIcAL

3 PRotectIon AGAInst InGRess oF 3 PRotectIon AGAInst RAIn FALLInG At AnyoBJects LARGeR tHAn 2.5MM AnGLe UP to 60˚ FRoM tHe VeRtIcAL

4 PRotectIon AGAInst InGRess oF 4 PRotectIon AGAInst LIQUID sPLAsHeDoBJects LARGeR tHAn 1MM FRoM ALL PRActIcABLe DIRectIons

5 PRotectIon AGAInst tHe InGRess oF DUst In 5 PRotectIon AGAInst LoW PRessURe JetssUFFIcIent QUAntIty to InteRFeRe WItH tHe oF WAteR FRoM ALL PRActIcABLe DIRectIonssAtIsFActoRy oPeRAtIon oF tHe eQUIPMent

6 coMPLete PRotectIon AGAInst tHe 6 PRotectIon AGAInst HeAVy seAs oR stRonGInGRess oF DUst Jets oF WAteR FRoM ALL PRActIcABLe DIRectIons

TP(a) AND TP(b) RATED MATERIALSthe Building Regulations 2000 for england & WalesApproved Document B2, places strict limitations onthe use of certain thermoplastic materials whenthey form part of a ceiling. In particular, tP(b) ratedthermoplastic materials can only be used if theirextent is limited in accordance with the diagram below:

Prismatic panels are available in tP(a) and tP(b) ratedmaterials on the Montana and Indiana fittings.

LINEAR FLOURESCENT LAMP SIzES

LAMPS INCLUDEDMany of the fittings listed in this catalogue are soldwith lamps.

We have adopted the 3-digit colour coding for lampsthat is used by all the major lamp manufacturers.Where this 3-digit code is shown at the end of theorder code for a product it indicates that the productin question is supplied complete with that particularlamp. Where the 3-digit code is not shown itindicates that the fitting is supplied without lamps.

the 3-digit code is structured as follows:

Digit 1 - this indicates the colour rendering index ofthe lamp, or Ra. For example:

2 = Ra in the range of 20-29 (a relatively poor colourrendering, only suitable in certain circumstances)

8 = Ra in the range of 80-89 (a good colourrendering, suitable for a wide variety of applications)

Digits 2 & 3 - these indicate the colour temperature ofthe lamp in hundreds of degrees Kelvin. For example:

35 = 3500 degs K40 = 4000 degs K

In general the lamps supplied with our HF fluorescentfittings are colour 840. this means they have a Ra inthe range of 80-89 and a colour temperature of4000K. the same numbering system is also used withHID lamps. son lamps are generally colour 220 andmetal halide lamps are generally colour 740.

STANDARDSAll the products in this catalogue conform to Bs en60598 and the relevant european directives.

t5 t8 KnoWn AsWAttAGe LenGtH WAttAGe LenGtH14W He 550 18W 600 2 Ft24W Ho 550 2 Ft21W He 850 3 Ft39W Ho 850 3 Ft28W He 1150 36W 1200 4 Ft54W Ho 1150 4 Ft35W He 1450 58W 1500 5 Ft49, 80W Ho 1450 5 Ft

70W 1800 6 Ft

5m maximum dimensionof group panels

5m max

5mm

ax

3m minimum

3m minimum dimensionsbetween groups of panels

Panel of diffuseror rooflight

separatedgroups of panelsor rooflights

NVC_TECH.qxp:TECHNICAL 22/4/13 17:52 Page 204

205

TECHNIC

AL

www.nvc

uk.com

|+44

(0)121

457

634

0

LINEAR FLUORESCENT LAMP DATA

Lamp type, Length Control Lamp System Lamp Lamp Lamp Lampnumber & wattage mm ft Gear Watts Watts Lumens Lumens Lumens per Lumens per

@ 25°C @ 35°C Watt @ 25°C Watt @ 35°CW W Lm Lm Lm/W Lm/W

T8 TRIPHOSPHOR 8401 x 18 600 2 Hf 16 18.20 1,350 n/a 74.18 n/a2 x 18 Hf 32 36.00 2,700 n/a 75.00 n/a3 x 18 Hf 48 52.50 4,050 n/a 77.14 n/a4 x 18 Hf 64 70.10 5,400 n/a 77.03 n/a1 x 36 1200 4 Hf 32 35.00 3,350 n/a 95.71 n/a2 x 36 Hf 64 69.80 6,700 n/a 95.99 n/a1 x 58 1500 5 Hf 50 54.00 5,200 n/a 96.30 n/a2 x 58 Hf 100 106.80 10,400 n/a 97.38 n/a1 x 70 1800 6 Hf 60 64.50 6,000 n/a 93.02 n/a2 x 70 Hf 120 128.00 12,000 n/a 93.75 n/a

T5 TRIPHOSPHOR 8401 x 14 550 2 Hf 14 16 1,230 1,350 79.35 87.102 x 14 Hf 27 31 2,460 2,700 79.35 87.103 x 14 Hf 41 46 3,690 4,050 80.22 88.044 x 14 Hf 55 62 4,920 5,400 79.35 87.101 x 21 850 3 Hf 21 23 1,910 2,100 83.04 91.302 x 21 Hf 41 45 3,820 4,200 84.89 93.331 x 24 550 2 Hf 23 25 1,700 2,000 68.00 80.002 x 24 Hf 45 49 3,400 4,000 69.39 81.631 x 28 1,150 4 Hf 28 30 2,640 2,900 88.00 96.672 x 28 Hf 56 60 5,280 5,800 88.00 96.671 x 35 1,450 5 Hf 35 38 3,300 3,650 86.84 96.052 x 35 Hf 69 75 6,600 7,300 88.00 97.331 x 54 1,150 4 Hf 54 58 4,450 5,000 76.72 86.212 x 54 Hf 108 115 8,900 10,000 77.73 87.341 x 49 1,450 5 Hf 49 53 4,165 4,900 79.33 93.332 x 49 Hf 99 104 8,330 9,800 80.10 94.231 x 80 1,450 5 Hf 80 85 6,160 7,000 72.47 82.352 x 80 Hf 160 167 12,320 14,000 73.77 83.83

T8 HALOPHOSPHATE 6401 x 18 600 2 Magnetic 18 26 1,100 n/a 42.31 n/a2 x 18 Magnetic 36 43 2,200 n/a 51.16 n/a3 x 18 Magnetic 54 69 3,300 n/a 47.83 n/a4 x 18 Magnetic 72 86 4,400 n/a 51.16 n/a1 x 36 1200 4 Magnetic 36 43 2,600 n/a 60.47 n/a2 x 36 Magnetic 72 86 5,200 n/a 60.47 n/a1 x 58 1500 5 Magnetic 58 67 4,100 n/a 61.19 n/a2 x 58 Magnetic 116 134 8,200 n/a 61.19 n/a1 x 70 1800 6 Magnetic 70 80 5,700 n/a 71.25 n/a2 x 70 Magnetic 140 160 11,400 n/a 71.25 n/a

NVC_TECH.qxp:TECHNICAL 22/4/13 17:52 Page 205

ww

w.n

vcuk

.com

|+44

(0)1

21457

634

0

Our industry is changing nowmore rapidly than ever

First, you, our customers are demanding more and more. More performance andenergy efficiency, more variety and more service.

Secondly, LEDs have reached the point where they are accepted as a viable(often the preferred) light source for most applications. This enables us to bring youlevels of performance and longevity that just a few years ago were unheard of.

This catalogue, our sixth in just five years,reflects your changing demands and ourresponse to LED technology. In it you will find:

- Over 30 completely new product ranges

- A new section of fittings for prisons,police stations and other physicallydemanding areas

- A dedicated and enlarged section of exteriorlighting, and a separate flood-light section

- More LED fittings in all sections

- Clear indication of which fittings qualify forEnhanced Capital Allowances, with the“ECA Symbol”

Besides a rapidly expanding product range,other aspects of NVC are evolving rapidly sothat we can support you better. We have:

- Expanded our free lighting design serviceby 50%

- Invested in additional transport to improveour delivery service

- Increased our use of leading brand componentsfrom companies such as Tridonic, Helvar, Philipsand Mackwell

- Expanded our in-house assembly facilities so wecan offer a wider choice of specialist fittings

Finally, you would be welcome to come andvisit us. We have extensive meeting facilities andthe opportunity to meet our technical teamand our lighting designers is usually beneficialfor all concerned.

We look forward to seeing you.

NVC_COVER.qxp:FRONT COVER 22/4/13 13:23 Page 2

NVC Lighting LimitedNVC Park 201Hollymoor WayRuberyBirminghamB31 5HEUK

T +44 (0)121 457 6340F +44 (0)121 453 1325www.nvcuk.com ISSUE 06

ISSUE

06

NVC and the NVC logo are registered trade marks of NVC Lighting TechnologyCorporation, NVC Industrial Park, Ruhu Town, Huizhou City, Guangdong, China

Sales:T +44 (0)121 457 6340F +44 (0)121 453 1325E [email protected]

Accounts:T +44 (0)121 457 6341F +44 (0)121 457 6342E [email protected]

Lighting Design:T +44 (0)121 457 6343E [email protected]

Technical:T +44 (0)121 457 6344E [email protected]

CO

NT

AC

T

NVC_COVER.qxp:FRONT COVER 22/4/13 13:23 Page 1

NVC Catalogue Issue 6

Documents

Transcript of NVC Catalogue Issue 6