Number of Records found - NSAI - NSAI

Reference Title En Origin Body Publication D..

I.S. EN 31:2011+A1:2014 Wash basins - Connecting dimensions CEN 5/10/2014

I.S. EN 35:2014 Pedestal and wall-hung bidets with over-rim supply - Connecting dimensions CEN 5/17/2014

I.S. EN 54-3:2014 Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders CEN 8/14/2014

I.S. EN 71-1:2014 Safety of toys - Part 1: Mechanical and physical properties CEN 12/13/2014

I.S. EN 71-2:2011+A1:2014 Safety of toys - Part 2: Flammability CEN 4/5/2014

I.S. EN 71-13:2014Safety of toys - Part 13: Olfactory board games, cosmetic kits and gustativegames CEN 4/5/2014

I.S. EN 73:2014Wood preservatives - Accelerated ageing of treated wood prior to biologicaltesting - Evaporative ageing procedure CEN 11/1/2014

I.S. EN 81-20:2014Safety rules for the construction and installation of lifts - Lifts for the transportof persons and goods - Part 20: Passenger and goods passenger lifts CEN 8/23/2014

I.S. EN 81-22:2014Safety rules for the construction and installation of lifts - Lifts for the transportof persons and goods - Part 22: Electric lifts with inclined path CEN 6/7/2014

I.S. EN 81-50:2014Safety rules for the construction and installation of lifts - Examinations and tests- Part 50: Design rules, calculations, examinations and tests of lift components CEN 8/23/2014

I.S. EN 197-2:2014 Cement - Part 2: Conformity evaluation CEN 2/1/2014

I.S. EN 203-1:2014 Gas heated catering equipment - Part 1: General safety rules CEN 3/8/2014

I.S. EN 203-2-7:2014Gas heated catering equipment - Part 2-7: Specific requirements - Salamandersand rotisseries CEN 4/1/2014

I.S. EN 250:2014Respiratory equipment - Open-circuit self-contained compressed air divingapparatus - Requirements, testing and marking CEN 4/19/2014

I.S. EN 252:2014Field test method for determining the relative protective effectiveness of a woodpreservative in ground contact CEN 11/26/2014

I.S. EN 289:2014Plastics and rubber machines - Compression moulding machines and transfermoulding machines - Safety requirements CEN 7/5/2014

I.S. EN 326-2:2010+A1:2014Wood-based panels - Sampling, cutting and inspection - Part 2: Initial typetesting and factory production control CEN 8/23/2014

I.S. EN 327:2014Heat exchangers - Forced convection air cooled refrigerant condensers - Testprocedures for establishing performance CEN 9/13/2014

I.S. EN 328:2014Heat exchangers - Forced convection unit air coolers for refrigeration - Testprocedures for establishing the performance CEN 9/13/2014

I.S. EN 330:2014Wood preservatives - Determination of the relative protective effectiveness of awood preservative for use under a coating and exposed out-of-ground contact -Field test: L-joint method

CEN 11/26/2014

I.S. EN 415-1:2014Safety of packaging machines - Part 1: Terminology and classification ofpackaging machines and associated equipment CEN 7/26/2014

I.S. EN 415-10:2014 Safety of packaging machines - Part 10: General Requirements CEN 2/1/2014

I.S. EN 442-1:2014 Radiators and convectors - Part 1: Technical specifications and requirements CEN 12/27/2014

I.S. EN 442-2:2014 Radiators and convectors - Part 2: Test methods and rating CEN 12/27/2014

I.S. EN 453:2014 Food processing machinery - Dough mixers - Safety and hygiene requirements CEN 11/26/2014

I.S. EN 454:2014Food processing machinery - Planetary mixers - Safety and hygienerequirements CEN 12/13/2014

I.S. EN 474-1:2006+A4:2013/AC:2014 Earth-moving machinery - Safety - Part 1: General requirements CEN 4/2/2014

I.S. EN 508-1:2014Roofing and cladding products from metal sheet - Specification forself-supporting of steel, aluminium or stainless steel sheet - Part 1: Steel CEN 7/1/2014

I.S. EN 564:2014Mountaineering equipment - Accessory cord - Safety requirements and testmethods CEN 12/27/2014

I.S. EN 643:2014Paper and board - European list of standard grades of paper and board forrecycling CEN 2/10/2014

I.S. EN 694:2014 Fire-fighting hoses - Semi-rigid hoses for fixed systems CEN 8/16/2014

I.S. EN 839:2014Wood preservatives - Determination of the protective effectiveness againstwood destroying basidiomycetes - Application by surface treatment CEN 11/26/2014

I.S. EN 851:2014Aluminium and aluminium alloys - Circle and circle stock for the production ofculinary utensils - Specifications CEN 5/10/2014

I.S. EN 900:2014 Chemicals used for treatment of water intended for human consumption -Calcium hypochlorite

CEN 7/19/2014

NSAI - Standards Publications NSAI WEB Report Date of Publication :All

Number of Records found :1,329

Reference Title En Origin Body Publication D..I.S. EN 851:2014Aluminium and aluminium alloys - Circle and circle stock for the production ofculinary utensils - Specifications CEN 5/10/2014

I.S. EN 900:2014Chemicals used for treatment of water intended for human consumption -Calcium hypochlorite CEN 7/19/2014

I.S. EN 927-2:2014Paints and varnishes - Coating materials and coating systems for exterior wood- Part 2: Performance specification CEN 9/20/2014

I.S. EN 932-5:2012/AC:2014Tests for general properties of aggregates - Part 5: Common equipment andcalibration CEN 7/1/2014

I.S. EN 933-6:2014Tests for geometrical properties of aggregates - Part 6: Assessment of surfacecharacteristics - Flow coefficient of aggregates CEN 4/19/2014

I.S. EN 941:2014Aluminium and aluminium alloys - Circle and circle stock for the production ofgeneral applications - Specifications CEN 5/10/2014

I.S. EN 957-6:2010+A1:2014Stationary training equipment - Part 6: Treadmills, additional specific safetyrequirements and test methods CEN 5/3/2014

I.S. EN 1021-1:2014Furniture - Assessment of the ignitability of upholstered furniture - Part 1:Ignition source smouldering cigarette CEN 8/30/2014

I.S. EN 1021-2:2014Furniture - Assessment of the ignitability of upholstered furniture - Part 2:Ignition source match flame equivalent CEN 8/30/2014

I.S. EN 1048:2014Heat exchangers - Air cooled liquid coolers ('dry coolers') - Test procedures forestablishing the performance CEN 9/13/2014

I.S. EN 1092-1:2007+A1:2013/AC:2014Flanges and their joints - Circular flanges for pipes, valves, fittings andaccessories, PN designated - Part 1: Steel flanges CEN 8/10/2014

I.S. EN 1097-9:2014Tests for mechanical and physical properties of aggregates - Part 9:Determination of the resistance to wear by abrasion from studded tyres - Nordictest

CEN 1/18/2014

I.S. EN 1097-10:2014Tests for mechanical and physical properties of aggregates - Part 10:Determination of water suction height CEN 6/7/2014

I.S. EN 1124-2:2014Pipes and fittings of longitudinally welded stainless steel pipes with spigot andsocket for waste water systems - Part 2: System S, forms and dimensions CEN 7/5/2014

I.S. EN 1127-2:2014Explosive atmospheres - Explosion prevention and protection - Part 2: Basicconcepts and methodology for mining CEN 7/5/2014

I.S. EN 1143-2:2014Secure storage units - Requirements, classification and methods of tests forresistance to burglary - Part 2: Deposit systems CEN 5/17/2014

I.S. EN 1176-11:2014Playground equipment and surfacing - Part 11: Additional specific safetyrequirements and test methods for spatial network CEN 9/6/2014

I.S. EN 1197:2014Chemicals used for treatment of water intended for human consumption -Monozinc phosphate solution CEN 3/29/2014

I.S. EN 1271:2014Playing field equipment - Volleyball equipment - Functional and safetyrequirements, test methods CEN 11/26/2014

I.S. EN 1325:2014 Value Management - Vocabulary - Terms and definitions CEN 4/5/2014

I.S. EN 1329-1:2014Plastics piping systems for soil and waste discharge (low and high temperature)within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part1: Specifications for pipes, fittings and the system

CEN 2/22/2014

I.S. EN 1364-3:2014Fire resistance tests for non-loadbearing elements - Part 3: Curtain walling - Fullconfiguration (complete assembly) CEN 2/10/2014

I.S. EN 1364-4:2014Fire resistance tests for non-loadbearing elements - Part 4: Curtain walling -Part configuration CEN 2/15/2014

I.S. EN 1365-2:2014 Fire resistance tests for loadbearing elements - Part 2: Floors and roofs CEN 12/1/2014

I.S. EN 1366-1:2014 Fire resistance tests for service installations - Part 1: Ventilation ducts CEN 10/18/2014

I.S. EN 1366-12:2014Fire resistance tests for service installations - Part 12: Non-mechanical firebarrier for ventilation ductwork CEN 10/18/2014

I.S. EN 1367-7:2014Tests for thermal and weathering properties of aggregates - Part 7:Determination of resistance to freezing and thawing of Lightweight aggregates CEN 4/12/2014

I.S. EN 1367-8:2014Tests for thermal and weathering properties of aggregates - Part 8:Determination of resistance to disintegration of Lightweight Aggregates CEN 4/12/2014

I.S. EN 1400:2013+A1:2014Child use and care articles - Soothers for babies and young children - Safetyrequirements and test methods CEN 5/3/2014

I.S. EN 1422:2014Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements andtest methods CEN 6/7/2014

I.S. EN 1466:2014Child use and care articles - Carry cots and stands - Safety requirements andtest methods CEN 12/7/2014

I.S. EN 1487:2014 Building valves - Hydraulic safety groups - Tests and requirements CEN 7/26/2014

I.S. EN 1514-2:2014Flanges and their joints - Gaskets for PN-designated flanges - Part 2: Spiralwound gaskets for use with steel flanges CEN 9/27/2014

I.S. EN 1559-2:2014Founding - Technical conditions of delivery - Part 2: Additional requirements forsteel castings CEN 10/18/2014

I.S. EN 1570-1:2011+A1:2014 Safety requirements for lifting tables - Part 1: Lifting tables serving up to twofixed landings

CEN 10/18/2014



Reference Title En Origin Body Publication D..I.S. EN 1559-2:2014Founding - Technical conditions of delivery - Part 2: Additional requirements forsteel castings CEN 10/18/2014

I.S. EN 1570-1:2011+A1:2014Safety requirements for lifting tables - Part 1: Lifting tables serving up to twofixed landings CEN 10/18/2014

I.S. EN 1621-2:2014Motorcyclists' protective clothing against mechanical impact - Part 2:Motorcyclists' back protectors - Requirements and test methods CEN 1/25/2014

I.S. EN 1634-1:2014Fire resistance and smoke control tests for door and shutter assemblies,openable windows and elements of building hardware - Part 1: Fire resistancetest for door and shutter assemblies and openable windows

CEN 1/25/2014

I.S. EN 1643:2014Safety and control devices for gas burners and gas burning appliances - Valveproving systems for automatic shut-off valves CEN 3/22/2014

I.S. EN 1672-1:2014 Food processing machinery - Basic concepts - Part 1: Safety requirements CEN 10/18/2014

I.S. EN 1751:2014Ventilation for buildings - Air terminal devices - Aerodynamic testing of damperand valves CEN 2/10/2014

I.S. EN 1789:2007+A2:2014 Medical vehicles and their equipment - Road ambulances CEN 9/27/2014

I.S. EN 1866-2:2014Mobile fire extinguishers - Part 2: Requirements for the construction, pressureresistance and mechanical tests for extinguishers, with a maximum allowablepressure equal to or lower than 30 bar, which comply with the requirements of..

CEN 5/17/2014

I.S. EN 1870-3:2014Safety of woodworking machines - Circular sawing machines - Part 3: Downcutting cross-cut saws and dual purpose down cutting cross-cut saws/circularsaw benches

CEN 12/7/2014

I.S. EN 1947:2014Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumpsand vehicles CEN 7/26/2014

I.S. EN 1991-1-2:2002/AC:2013Eurocode 1: Actions on structures - Part 1-2: General actions - Actions onstructures exposed to fire CEN 7/31/2014

I.S. EN 1995-1-1:2004/A2:2014Eurocode 5: Design of timber structures - Part 1-1: General - Common rules andrules for buildings CEN 5/17/2014

I.S. EN 1997-1:2005/A1:2013 Eurocode 7: Geotechnical design - Part 1: General rules CEN 8/1/2014

I.S. EN 2032-001:2014 Aerospace series - Metallic materials - Part 001: Conventional designation CEN 8/16/2014

I.S. EN 2226:2014Aerospace series - Steel X105CrMo17 (1.4125) - Hardened and tempered -Hand and die forgings - De â‰ ¤ 150 mm CEN 8/2/2014

I.S. EN 2278:2014Aerospace series - Steel X12CrNiMoV12-3 (1.4933) - 900 MPa â‰ ¤ Rm â‰ ¤ 1100 MPa - Bars - De â‰ ¤ 150 mm CEN 11/1/2014

I.S. EN 2512:2014Aerospace series - Aluminium alloy AL-P7175 - T7351 - Plate - 6mm < a â‰ ¤100 mm CEN 10/18/2014

I.S. EN 2794-001:2014Aerospace series - Circuit breakers, single-pole, temperature compensated,rated current 20 A to 50 A - Part 001: Technical specification CEN 2/1/2014

I.S. EN 2794-004:2014Aerospace series - Circuit breakers, single-pole, temperature compensated,rated currents 20 A to 50 A - Part 004: UNC thread terminals - Product standardCEN 2/1/2014

I.S. EN 3155-070:2014Aerospace series - Electrical contacts used in elements of connection - Part 070:Contacts, electrical, male, type A, crimp, class S - Product standard CEN 11/26/2014

I.S. EN 3155-071:2014Aerospace series - Electrical contacts used in elements of connection - Part 071:Contacts, electrical, female, type A, crimp, class S - Product standard CEN 11/26/2014

I.S. EN 3155-078:2014Aerospace series - Electrical contacts used in elements of connection - Part 078:Contacts size 22 for EN 2997, electrical, male, type A, crimp, class S - Productstandard

CEN 11/26/2014

I.S. EN 3155-079:2014Aerospace series - Electrical contacts used in elements of connection - Part 079:Contacts size 22 for EN 2997, electrical, female, type A, crimp, class S - Productstandard

CEN 11/26/2014

I.S. EN 3155-080:2014Aerospace series - Electrical contacts used in elements of connection - Part 080:Contacts size 22 for EN 2997, electrical, male, type A, crimp, class T - Productstandard

CEN 11/26/2014

I.S. EN 3155-081:2014Aerospace series - Electrical contacts used in elements of connection - Part 081:Contacts size 22 for EN 2997, electrical, female, type A, crimp, class T - Productstandard

CEN 11/26/2014

I.S. EN 3268:2014 Aerospace series - Pipe coupling 8Â°30' in titanium alloy - Pressure plugs CEN 10/18/2014

I.S. EN 3475-411:2014Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411:Resistance to fluids CEN 11/26/2014

I.S. EN 3475-514:2014Aerospace series - Cables, electrical, aircraft use - Test methods - Part 514:Porosity of copper cladding on aluminium strands CEN 5/10/2014

I.S. EN 3631:2014Aerospace series - Fluid fittings, flanged, 90Â° elbowed - Sealing by O-ring for0,8 mm thick tubes CEN 10/18/2014

I.S. EN 3635:2014 Aerospace series - Weld lip - Geometrical configuration CEN 10/18/2014

I.S. EN 3773-001:2014Aerospace series - Circuit breakers, single-pole, temperature compensated,rated currents 1 A to 25 A - Part 001: Technical specification CEN 10/25/2014

I.S. EN 3773-004:2014Aerospace series - Circuit breakers, single-pole, temperature compensated,rated currents 1 A to 25 A - Part 004: UNC thread terminals - Product standard CEN 11/1/2014

I.S. EN 3774-001:2014Aerospace series - Circuit breakers, three-pole, temperature compensated, ratedcurrents 1 A to 25 A - Part 001: Technical specification CEN 10/18/2014

I.S. EN 3774-004:2014 Aerospace series - Circuit breakers, three-pole, temperature compensated, ratedcurrents 1 A to 25 A - Part 004: UNC thread terminals - Product standard

CEN 8/16/2014



Reference Title En Origin Body Publication D..I.S. EN 3774-001:2014Aerospace series - Circuit breakers, three-pole, temperature compensated, ratedcurrents 1 A to 25 A - Part 001: Technical specification CEN 10/18/2014

I.S. EN 3774-004:2014Aerospace series - Circuit breakers, three-pole, temperature compensated, ratedcurrents 1 A to 25 A - Part 004: UNC thread terminals - Product standard CEN 8/16/2014

I.S. EN 4008-018:2014Aerospace series - Elements of electrical and optical connection - Crimping tooland associated accessories - Part 018: Positioner for crimping tool M22520/2-01- Product standard

CEN 8/2/2014

I.S. EN 4056-002:2014Aerospace series - Cable ties for harnesses - Part 002: Index of productstandards CEN 8/2/2014

I.S. EN 4056-006:2014Aerospace series - Cable ties for harnesses - Part 006: Peek cable ties - Foroperating temperatures -55 Â°C to 240 Â°C - Product standard CEN 8/2/2014

I.S. EN 4057-402:2014 Aerospace series - Cable ties for harnesses - Test methods - Part 402: Life cycleCEN 5/10/2014

I.S. EN 4199-003:2014Aerospace series - Bonding straps for aircraft - Part 003: Bonding strapassemblies with flat braided conductor copper, tin plated - 65 Â°C up to 150Â°C and copper, nickel plated - 65 Â°C up to 260 Â°C - Product standard

CEN 8/12/2014

I.S. EN 4199-004:2014Aerospace series - Bonding straps for aircraft - Part 004: Round bonding straps,copper, tin plated -65 Â°C up to 150 Â°C and nickel plated -65 Â°C up to 260Â°C - Product Standard

CEN 11/26/2014

I.S. EN 4293:2014Aerospace series - Aluminium alloy AL-P7175 - T73511 - Extruded bar andsection - a or D â‰ ¤ 150 mm CEN 5/10/2014

I.S. EN 4538-2:2014Aerospace series - Bearings, spherical plain, in corrosion resisting steel withself-lubricating liner elevated load under low oscillations - Narrow series -Dimensions and loads - Part 2: Inch series

CEN 8/2/2014

I.S. EN 4549:2014Aerospace series - Pipe coupling, in heat resisting steel or in heat resistingnickel alloy - Coupling end, welded - Design configuration - Inch series CEN 5/10/2014

I.S. EN 4551:2014Aerospace series - Pipe coupling, 37Â°, in heat resisting steel - Swivel nuts -Inch series CEN 10/18/2014

I.S. EN 4627:2014Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened andtempered - Forgings - De â‰ ¤ 200 mm - 1 150 MPa â‰ ¤ Rm â‰ ¤ 1 300MPa

CEN 5/10/2014

I.S. EN 4630:2014Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened andtempered - Forgings - De â‰ ¤ 200 mm - 900 MPa â‰ ¤ Rm â‰ ¤ 1 050 MPa CEN 11/1/2014

I.S. EN 4651:2014Aerospace series - Copper-clad aluminium alloy conductors for electrical cables -Product standard CEN 5/10/2014

I.S. EN 4686:2014Aerospace series - Pipe coupling 8Â°30' in titanium alloy - Equipped blindferrules CEN 10/18/2014

I.S. EN 4707:2014Aerospace series - Acid pickling of aluminum and aluminum alloy withouthexavalent chromium CEN 5/10/2014

I.S. EN 4708-001:2014Aerospace series - Sleeving, heat-shrinkable, for binding, insulation andidentification - Part 001: Technical specification CEN 5/10/2014

I.S. EN 4720:2014Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted and electroslagremelted (ESR) - Hardened and tempered - Bar - De â‰ ¤ 200 mm - 1 150 MPaâ‰ ¤ Rm â‰ ¤ 1 300 MPa

CEN 11/1/2014

I.S. EN 4721:2014Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted and electroslagremelted (ESR) - Hardened and tempered - Bar - De â‰ ¤ 200 mm - 900 MPaâ‰ ¤ Rm â‰ ¤ 1 050 MPa

CEN 11/1/2014

I.S. EN 4725:2014Aerospace series - Aluminium alloy AL-P2024- Al Cu4Mg1 - T351 - Plate - 6 mm< a â‰ ¤ 150 mm CEN 11/26/2014

I.S. EN 6059-308:2014Aerospace series - Electrical cables, installation - Protection sleeves - Testmethods - Part 308: Rapid change of temperature CEN 12/27/2014

I.S. EN 6059-406:2014Aerospace series - Electrical cables, installation - Protection sleeves - Testmethods - Part 406: Vibration CEN 5/10/2014

I.S. EN 6059-502:2014Aerospace series - Electrical cables, installation - Protection sleeves - Testmethods - Part 502: Resistance to electrical arcs CEN 12/27/2014

I.S. EN 6059-504:2014Aerospace series - Electrical cables, installation - Protection sleeves - Testmethods - Part 504: Temperature rise within a loom due to self-heating whenprotected by a sleeve

CEN 8/2/2014

I.S. EN 6059-601:2014Aerospace series - Electrical cables, installation - Protection sleeves - Testmethods - Part 601: Open and close CEN 5/10/2014

I.S. EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels CEN 11/8/2014

I.S. EN 10088-2:2014Stainless steels - Part 2: Technical delivery conditions for sheet/plate and stripof corrosion resisting steels for general purposes CEN 11/8/2014

I.S. EN 10088-3:2014Stainless steels - Part 3: Technical delivery conditions for semi-finishedproducts, bars, rods, wire, sections and bright products of corrosion resistingsteels for general purposes

CEN 11/8/2014

I.S. EN 10107:2014Grain-oriented electrical steel strip and sheet delivered in the fully processedstate CEN 4/5/2014

I.S. EN 10217-7:2014Welded steel tubes for pressure purposes - Technical delivery conditions - Part7: Stainless steel tubes CEN 11/26/2014

I.S. EN 12007-5:2014Gas infrastructure - Pipelines for maximum operating pressure up to andincluding 16 bar - Part 5: Service lines - Specific functional requirements CEN 4/12/2014

I.S. EN 12015:2014Electromagnetic compatibility - Product family standard for lifts, escalators andmoving walks - Emission CEN 4/5/2014

I.S. EN 12021:2014 Respiratory equipment - Compressed gases for breathing apparatus CEN 4/19/2014

I.S. EN 12041:2014 Food processing machinery - Moulders - Safety and hygiene requirements CEN 12/13/2014



Reference Title En Origin Body Publication D..I.S. EN 12021:2014 Respiratory equipment - Compressed gases for breathing apparatus CEN 4/19/2014

I.S. EN 12041:2014 Food processing machinery - Moulders - Safety and hygiene requirements CEN 12/13/2014

I.S. EN 12042:2014Food processing machinery - Automatic dough dividers - Safety and hygienerequirements CEN 4/12/2014

I.S. EN 12043:2014Food processing machinery - Intermediate provers - Safety and hygienerequirements CEN 12/13/2014

I.S. EN 12110:2014 Tunnelling machines - Air locks - Safety requirements CEN 6/7/2014

I.S. EN 12111:2014Tunnelling machines - Road headers and continuous miners - Safetyrequirements CEN 5/17/2014

I.S. EN 12183:2014 Manual wheelchairs - Requirements and test methods CEN 4/5/2014

I.S. EN 12184:2014Electrically powered wheelchairs, scooters and their chargers - Requirementsand test methods CEN 4/5/2014

I.S. EN 12186:2014Gas infrastructure - Gas pressure regulating stations for transmission anddistribution - Functional requirements CEN 11/8/2014

I.S. EN 12229:2014Surfaces for sports areas - Procedure for the preparation of synthetic turf andneedle-punch test pieces CEN 2/10/2014

I.S. EN 12252:2014 LPG equipment and accessories - Equipping of LPG road tankers CEN 4/12/2014

I.S. EN 12268:2014Food processing machinery - Band saw machines - Safety and hygienerequirements CEN 11/26/2014

I.S. EN 12312-2:2014Aircraft ground support equipment - Specific requirements - Part 2: Cateringvehicles CEN 4/12/2014

I.S. EN 12312-4:2014Aircraft ground support equipment - Specific requirements - Part 4: Passengerboarding bridges CEN 4/5/2014

I.S. EN 12312-14:2014Aircraft ground support equipment - Specific requirements - Part 14:Disabled/incapacitated passenger boarding vehicles CEN 7/5/2014

I.S. EN 12326-1:2014Slate and stone for discontinuous roofing and external cladding - Part 1:Specifications for slate and carbonate slate CEN 9/13/2014

I.S. EN 12341:2014Ambient air - Standard gravimetric measurement method for the determinationof the PM10 or PM2,5 mass concentration of suspended particulate matter CEN 6/7/2014

I.S. EN 12377:2014 Packaging - Flexible tubes - Test method for the air tightness of closures CEN 11/26/2014

I.S. EN 12420:2014 Copper and copper alloys - Forgings CEN 7/12/2014

I.S. EN 12463:2014Food processing machinery - Filling machines and auxiliary machines - Safetyand hygiene requirements CEN 11/26/2014

I.S. EN 12464-2:2014 Light and lighting - Lighting of work places - Part 2: Outdoor work places CEN 2/10/2014

I.S. EN 12473:2014 General principles of cathodic protection in seawater CEN 2/22/2014

I.S. EN 12493:2013+A1:2014LPG equipment and accessories - Welded steel pressure vessels for LPG roadtankers - Design and manufacture CEN 8/9/2014

I.S. EN 12516-1:2014Industrial valves - Shell design strength - Part 1: Tabulation method for steelvalve shells CEN 11/26/2014

I.S. EN 12516-2:2014Industrial valves - Shell design strength - Part 2: Calculation method for steelvalve shells CEN 11/26/2014

I.S. EN 12516-4:2014Industrial valves - Shell design strength - Part 4: Calculation method for valveshells manufactured in metallic materials other than steel CEN 11/26/2014

I.S. EN 12518:2014Chemicals used for treatment of water intended for human consumption -High-calcium lime CEN 8/16/2014

I.S. EN 12547:2014 Centrifuges - Common safety requirements CEN 11/1/2014

I.S. EN 12561-3:2011/AC:2014Railway applications - Tank wagons - Part 3: Bottom filling and emptyingdevices for gases liquefied under pressure CEN 12/7/2014

I.S. EN 12583:2014 Gas Infrastructure - Compressor stations - Functional requirements CEN 3/22/2014

I.S. EN 12592:2014 Bitumen and bituminous binders - Determination of solubility CEN 11/26/2014

I.S. EN 12594:2014 Bitumen and bituminous binders - Preparation of test samples CEN 11/26/2014

I.S. EN 12595:2014 Bitumen and bituminous binders - Determination of kinematic viscosity CEN 11/26/2014

I.S. EN 12596:2014Bitumen and bituminous binders - Determination of dynamic viscosity byvacuum capillary CEN 11/26/2014

I.S. EN 12597:2014 Bitumen and bituminous binders - Terminology CEN 6/7/2014



Reference Title En Origin Body Publication D..I.S. EN 12596:2014Bitumen and bituminous binders - Determination of dynamic viscosity byvacuum capillary CEN 11/26/2014

I.S. EN 12597:2014 Bitumen and bituminous binders - Terminology CEN 6/7/2014

I.S. EN 12607-1:2014Bitumen and bituminous binders - Determination of the resistance to hardeningunder influence of heat and air - Part 1: RTFOT method CEN 11/26/2014

I.S. EN 12607-2:2014Bitumen and bituminous binders - Determination of the resistance to hardeningunder influence of heat and air - Part 2: TFOT method CEN 11/26/2014

I.S. EN 12607-3:2014Bitumen and bituminous binders - Determination of the resistance to hardeningunder influence of heat and air - Part 3: RFT method CEN 11/26/2014

I.S. EN 12643:2014Earth-moving machinery - Rubber-tyred machines - Steering requirements (ISO5010:1992 modified) CEN 3/1/2014

I.S. EN 12645:2014Tyre pressure measuring instruments - Devices for inspection of pressureand/or inflation / deflation of tyres for motor vehicles - Metrology, requirementsand testing

CEN 9/6/2014

I.S. EN 12662:2014Liquid petroleum products - Determination of total contamination in middledistillates, diesel fuels and fatty acid methyl esters CEN 3/8/2014

I.S. EN 12663-1:2010+A1:2014Railway applications - Structural requirements of railway vehicle bodies - Part 1:Locomotives and passenger rolling stock (and alternative method for freightwagons)

CEN 12/20/2014

I.S. EN 12697-7:2014Bituminous mixtures - Test methods for hot mix asphalt - Part 7: Determinationof bulk density of bituminous specimens by gamma rays CEN 5/17/2014

I.S. EN 12697-43:2014Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance tofuel CEN 7/12/2014

I.S. EN 12697-49:2014Bituminous mixtures - Test methods for hot mix asphalt - Part 49:Determination of friction after polishing CEN 2/1/2014

I.S. EN 12732:2013+A1:2014 Gas infrastructure - Welding steel pipework - Functional requirements CEN 5/3/2014

I.S. EN 12814-3:2014Testing of welded joints in thermoplastics semi-finished products - Part 3:Tensile creep test CEN 3/8/2014

I.S. EN 12822:2014Foodstuffs - Determination of vitamin E by high performance liquidchromatography - Measurement of Î±-, Î²-, Î³- and Î́-tocopherol CEN 6/21/2014

I.S. EN 12823-1:2014Foodstuffs - Determination of vitamin A by high performance liquidchromatography - Part 1: Measurement of all-E-retinol and 13-Z-retinol CEN 7/1/2014

I.S. EN 12828:2012+A1:2014 Heating systems in buildings - Design for water-based heating systems CEN 4/12/2014

I.S. EN 12873-1:2014Influence of materials on water intended for human consumption - Influencedue to migration - Part 1: Test method for factory-made products made from orincorporating organic or glassy (porcelain/vitreous enamel) materials

CEN 7/19/2014

I.S. EN 12878:2014Pigments for the colouring of building materials based on cement and/or lime -Specifications and methods of test CEN 4/19/2014

I.S. EN 12881-1:2014Conveyor belts - Fire simulation flammability testing - Part 1: Propane burnertests CEN 5/31/2014

I.S. EN 12966:2014 Road vertical signs - Variable message traffic signs CEN 12/27/2014

I.S. EN 13000:2010+A1:2014 Cranes - Mobile cranes CEN 5/31/2014

I.S. EN 13001-2:2014 Crane safety - General design - Part 2: Load actions CEN 8/23/2014

I.S. EN 13001-3-2:2014Cranes - General design - Part 3-2: Limit states and proof of competence of wireropes in reeving systems CEN 8/23/2014

I.S. EN 13001-3-3:2014Cranes - General design - Part 3-3: Limit states and proof of competence ofwheel/rail contacts CEN 10/25/2014

I.S. EN 13022-1:2014Glass in building - Structural sealant glazing - Part 1: Glass products forstructural sealant glazing systems for supported and unsupported monolithicand multiple glazing

CEN 6/21/2014

I.S. EN 13022-2:2014 Glass in building - Structural sealant glazing - Part 2: Assembly rules CEN 6/21/2014

I.S. EN 13044-1:2011/AC:2014 Intermodal Loading Units - Marking - Part 1: Markings for identification CEN 8/1/2014

I.S. EN 13120:2009+A1:2014-2014-08 Internal blinds - Performance requirements including safety CEN 3/1/2014

I.S. EN 13126-5:2011+A1:2014Building hardware - Hardware for windows and door height windows -Requirements and test methods - Part 5: Devices that restrict the opening ofwindows and door height windows

CEN 11/26/2014

I.S. EN 13138-1:2014Buoyant aids for swimming instruction - Part 1: Safety requirements and testmethods for buoyant aids to be worn CEN 10/18/2014

I.S. EN 13138-2:2014Buoyant aids for swimming instruction - Part 2: Safety requirements and testmethods for buoyant aids to be held CEN 12/20/2014

I.S. EN 13138-3:2014Buoyant aids for swimming instruction - Part 3: Safety requirements and testmethods for swim seats to be worn CEN 12/20/2014

I.S. EN 13141-6:2014Ventilation for buildings - Performance testing of components/products forresidential ventilation - Part 6: Exhaust ventilation system packages used in asingle dwelling

CEN 12/27/2014

I.S. EN 13141-8:2014 Ventilation for buildings - Performance testing of components/products forresidential ventilation - Part 8: Performance testing of un-ducted mechanicalsupply and exhaust ventilation units (including heat recovery) for mechanical v..

CEN 7/12/2014



Reference Title En Origin Body Publication D..I.S. EN 13141-6:2014

Ventilation for buildings - Performance testing of components/products forresidential ventilation - Part 6: Exhaust ventilation system packages used in asingle dwelling CEN 12/27/2014

I.S. EN 13141-8:2014Ventilation for buildings - Performance testing of components/products forresidential ventilation - Part 8: Performance testing of un-ducted mechanicalsupply and exhaust ventilation units (including heat recovery) for mechanical v..

CEN 7/12/2014

I.S. EN 13146-1:2012+A1:2014Railway applications - Track - Test methods for fastening systems - Part 1:Determination of longitudinal rail restraint CEN 11/26/2014

I.S. EN 13146-4:2012+A1:2014Railway applications - Track - Test methods for fastening systems - Part 4:Effect of repeated loading CEN 11/26/2014

I.S. EN 13175:2014LPG Equipment and accessories - Specification and testing for LiquefiedPetroleum Gas (LPG) pressure vessel valves and fittings CEN 12/7/2014

I.S. EN 13197:2011+A1:2014 Road marking materials - Wear simulator Turntable CEN 4/29/2014

I.S. EN 13200-7:2014 Spectator facilities - Part 7: Entry and exit elements and routes CEN 3/29/2014

I.S. EN 13205-1:2014Workplace exposure - Assessment of sampler performance for measurement ofairborne particle concentrations - Part 1: General requirements CEN 7/5/2014

I.S. EN 13205-2:2014Workplace exposure - Assessment of sampler performance for measurement ofairborne particle concentrations - Part 2: Laboratory performance test based ondetermination of sampling efficiency

CEN 7/5/2014

I.S. EN 13205-4:2014Workplace exposure - Assessment of sampler performance for measurement ofairborne particle concentrations - Part 4: Laboratory performance test based oncomparison of concentrations

CEN 7/5/2014

I.S. EN 13205-5:2014Workplace exposure - Assessment of sampler performance for measurement ofairborne particle concentrations - Part 5: Aerosol sampler performance test andsampler comparison carried out at workplaces

CEN 7/5/2014

I.S. EN 13205-6:2014Workplace exposure - Assessment of sampler performance for measurement ofairborne particle concentrations - Part 6: Transport and handling tests CEN 7/5/2014

I.S. EN 13279-2:2014 Gypsum binders and gypsum plasters - Part 2: Test methods CEN 1/18/2014

I.S. EN 13368-1:2014Fertilizers - Determination of chelating agents in fertilizers by chromatography -Part 1: Determination of EDTA, HEEDTA and DTPA by ion chromatography CEN 2/1/2014

I.S. EN 13381-1:2014Test methods for determining the contribution to the fire resistance of structuralmembers - Part 1: Horizontal protective membranes CEN 10/11/2014

I.S. EN 13381-2:2014Test methods for determining the contribution to the fire resistance of structuralmembers - Part 2: Vertical protective membranes CEN 10/11/2014

I.S. EN 13381-5:2014Test methods for determining the contribution to the fire resistance of structuralmembers - Part 5: Applied protection to concrete/profiled sheet steel compositemember

CEN 12/1/2014

I.S. EN 13445-1:2014 Unfired pressure vessels - Part 1: General CEN 9/27/2014

I.S. EN 13445-1:2014/A1:2014 Unfired pressure vessels - Part 1: General CEN 12/1/2014

I.S. EN 13445-2:2014 Unfired pressure vessels - Part 2: Materials CEN 9/27/2014

I.S. EN 13445-3:2014 Unfired pressure vessels - Part 3: Design CEN 9/29/2014

I.S. EN 13445-4:2014 Unfired pressure vessels - Part 4: Fabrication CEN 9/27/2014

I.S. EN 13445-5:2014 Unfired pressure vessels - Part 5: Inspection and testing CEN 9/27/2014

I.S. EN 13445-6:2014Unfired pressure vessels - Part 6: Requirements for the design and fabricationof pressure vessels and pressure parts constructed from spheroidal graphitecast iron

CEN 9/27/2014

I.S. EN 13445-8:2014Unfired pressure vessels - Part 8: Additional requirements for pressure vesselsof aluminium and aluminium alloys CEN 9/27/2014

I.S. EN 13451-4:2014Swimming pool equipment - Part 4: Additional specific safety requirements andtest methods for starting platforms CEN 10/25/2014

I.S. EN 13451-5:2014Swimming pool equipment - Part 5: Additional specific safety requirements andtest methods for lane lines and dividing line CEN 8/23/2014

I.S. EN 13451-10:2014Swimming pool equipment - Part 10: Additional specific safety requirements andtest methods for diving platforms, diving springboards and associatedequipment

CEN 2/10/2014

I.S. EN 13451-11:2014Swimming pool equipment - Part 11: Additional specific safety requirements andtest methods for moveable pool floors and moveable bulkheads CEN 2/10/2014

I.S. EN 13501-6:2014Fire classification of construction products and building elements - Part 6:Classification using data from reaction to fire tests on electric cables CEN 3/15/2014

I.S. EN 13523-0:2014 Coil coated metals - Test methods - Part 0: General introduction CEN 7/5/2014

I.S. EN 13523-2:2014 Coil coated metals - Test methods - Part 2: Gloss CEN 7/5/2014

I.S. EN 13523-3:2014Coil coated metals - Test methods - Part 3: Colour difference - Instrumentalcomparison CEN 7/5/2014

I.S. EN 13523-4:2014 Coil coated metals - Test methods - Part 4: Pencil hardness CEN 8/16/2014

I.S. EN 13523-5:2014 Coil coated metals - Test methods - Part 5: Resistance to rapid deformation(impact test)

CEN 7/5/2014



Reference Title En Origin Body Publication D..I.S. EN 13523-4:2014 Coil coated metals - Test methods - Part 4: Pencil hardness CEN 8/16/2014

I.S. EN 13523-5:2014Coil coated metals - Test methods - Part 5: Resistance to rapid deformation(impact test) CEN 7/5/2014

I.S. EN 13523-7:2014Coil coated metals - Test methods - Part 7: Resistance to cracking on bending(T-bend test) CEN 7/5/2014

I.S. EN 13523-9:2014 Coil coated metals - Test methods - Part 9: Resistance to water immersion CEN 7/5/2014

I.S. EN 13523-13:2014Coil coated metals - Test methods - Part 13: Resistance to accelerated ageingby the use of heat CEN 7/5/2014

I.S. EN 13523-14:2014 Coil coated metals - Test methods - Part 14: Chalking (Helmen method) CEN 7/5/2014

I.S. EN 13523-25:2014 Coil coated metals - Test methods - Part 25: Resistance to humidity CEN 7/5/2014

I.S. EN 13523-26:2014Coil coated metals - Test methods - Part 26: Resistance to condensation ofwater CEN 7/5/2014

I.S. EN 13524:2003+A2:2014 Highway maintenance machines - Safety requirements CEN 3/1/2014

I.S. EN 13555:2014Flanges and their joints - Gasket parameters and test procedures relevant to thedesign rules for gasketed circular flange connections CEN 5/10/2014

I.S. EN 13599:2014 Copper and copper alloys - Copper plate, sheet and strip for electrical purposes CEN 1/18/2014

I.S. EN 13718-1:2014Medical vehicles and their equipment - Air ambulances - Part 1: Requirementsfor medical devices used in air ambulances CEN 10/4/2014

I.S. EN 13757-1:2014 Communication systems for meters - Part 1: Data exchange CEN 11/26/2014

I.S. EN 13805:2014 Foodstuffs - Determination of trace elements - Pressure digestion CEN 11/1/2014

I.S. EN 13823:2010+A1:2014Reaction to fire tests for building products - Building products excludingfloorings exposed to the thermal attack by a single burning item CEN 12/1/2014

I.S. EN 13848-6:2014Railway applications - Track - Track geometry quality - Part 6: Characterisationof track geometry quality CEN 4/5/2014

I.S. EN 13859-1:2014Flexible sheets for waterproofing - Definitions and characteristics of underlays -Part 1: Underlays for discontinuous roofing CEN 5/10/2014

I.S. EN 13859-2:2014Flexible sheets for waterproofing - Definitions and characteristics of underlays -Part 2: Underlays for walls CEN 5/10/2014

I.S. EN 13871:2014Food processing machinery - Cubes cutting machinery - Safety and hygienerequirements CEN 12/4/2014

I.S. EN 13906-3:2014Cylindrical helical springs made from round wire and bar - Calculation anddesign - Part 3: Torsion springs CEN 2/10/2014

I.S. EN 13924-2:2014Bitumen and bituminous binders - Specification framework for special pavinggrade bitumen - Part 2: Multigrade paving grade bitumens CEN 4/5/2014

I.S. EN 13936:2014Workplace exposure - Procedures for measuring a chemical agent present as amixture of airborne particles and vapour - Requirements and test methods CEN 2/1/2014

I.S. EN 13946:2014Water quality - Guidance for the routine sampling and preparation of benthicdiatoms from rivers and lakes CEN 3/22/2014

I.S. EN 13950:2014Gypsum board thermal/acoustic insulation composite panels - Definitions,requirements and test methods CEN 7/26/2014

I.S. EN 13963:2014Jointing materials for gypsum boards - Definitions, requirements and testmethods CEN 7/26/2014

I.S. EN 13964:2014 Suspended ceilings - Requirements and test methods CEN 3/22/2014

I.S. EN 14043:2014High rise aerial appliances for fire and rescue service use - Turntable ladderswith combined movements - Safety and performance requirements and testmethods

CEN 1/25/2014

I.S. EN 14044:2014High rise aerial appliances for fire and rescue service use - Turntable ladderswith sequential movements - Safety and performance requirements and testmethods

CEN 1/25/2014

I.S. EN 14076:2013 Timber stairs - Terminology CEN 1/14/2014

I.S. EN 14078:2014Liquid petroleum products - Determination of fatty acid methyl ester (FAME)content in middle distillates - Infrared spectrometry method CEN 5/17/2014

I.S. EN 14116:2012+A1:2014Tanks for transport of dangerous goods - Digital interface for productrecognition devices for liquid fuels CEN 10/28/2014

I.S. EN 14122:2014Foodstuffs - Determination of vitamin B1 by high performance liquidchromatography CEN 6/21/2014

I.S. EN 14129:2014 LPG Equipment and accessories - Pressure relief valves for LPG pressure vesselsCEN 3/1/2014

I.S. EN 14140:2014LPG equipment and accessories - Transportable refillable welded steel cylindersfor LPG - Alternative design and construction CEN 12/20/2014

I.S. EN 14152:2014 Foodstuffs - Determination of vitamin B2 by high performance liquidchromatography

CEN 6/21/2014



Reference Title En Origin Body Publication D..I.S. EN 14140:2014LPG equipment and accessories - Transportable refillable welded steel cylindersfor LPG - Alternative design and construction CEN 12/20/2014

I.S. EN 14152:2014Foodstuffs - Determination of vitamin B2 by high performance liquidchromatography CEN 6/21/2014

I.S. EN 14154-4:2014 Water meters - Part 4: Additional functionalities CEN 12/1/2014

I.S. EN 14164:2014 Foodstuffs - Determination of vitamin B6 by high performance chromatography CEN 6/21/2014

I.S. EN 14180:2014Sterilizers for medical purposes - Low temperature steam and formaldehydesterilizers - Requirements and testing CEN 6/7/2014

I.S. EN 14181:2014Stationary source emissions - Quality assurance of automated measuringsystems CEN 12/13/2014

I.S. EN 14184:2014Water quality - Guidance for the surveying of aquatic macrophytes in runningwaters CEN 4/5/2014

I.S. EN 14190:2014Gypsum board products from reprocessing - Definitions, requirements and testmethods CEN 8/2/2014

I.S. EN 14212:2012/AC:2014Ambient air - Standard method for the measurement of the concentration ofsulphur dioxide by ultraviolet fluorescence CEN 6/30/2014

I.S. EN 14214:2012+A1:2014Liquid petroleum products - Fatty acid methyl esters (FAME) for use in dieselengines and heating applications - Requirements and test methods CEN 2/23/2014

I.S. EN 14214:2012+A1:2014/AC:2014Liquid petroleum products - Fatty acid methyl esters (FAME) for use in dieselengines and heating applications - Requirements and test methods CEN 11/7/2014

I.S. EN 14334:2014 LPG equipment and accessories - Inspection and testing of LPG road tankers CEN 11/26/2014

I.S. EN 14407:2014Water quality - Guidance for the identification and enumeration of benthicdiatom samples from rivers and lakes CEN 4/5/2014

I.S. EN 14427:2014LPG equipment and accessories - Transportable refillable fully wrappedcomposite cylinders for LPG - Design and construction CEN 6/21/2014

I.S. EN 14432:2014Tanks for the transport of dangerous goods - Tank equipment for the transportof liquid chemicals and liquefied gases - Product discharge and air inlet valves CEN 11/1/2014

I.S. EN 14433:2014Tanks for the transport of dangerous goods - Tank equipment for the transportof liquid chemicals and liquefied gases - Foot valves CEN 11/1/2014

I.S. EN 14540:2014 Fire-fighting hoses - Non-percolating layflat hoses for fixed systems CEN 8/2/2014

I.S. EN 14570:2014LPG equipment and accessories - Equipping of overground and undergroundLPG vessels CEN 4/12/2014

I.S. EN 14654-1:2014Management and control of operational activities in drain and sewer systemsoutside buildings - Part 1: Cleaning CEN 7/5/2014

I.S. EN 14683:2014 Medical face masks - Requirements and test methods CEN 4/5/2014

I.S. EN 14700:2014 Welding consumables - Welding consumables for hard-facing CEN 4/12/2014

I.S. EN 14718:2014Influence of organic materials on water intended for human consumption -Determination of the chlorine demand - Test method CEN 12/20/2014

I.S. EN 14893:2014LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG)welded steel pressure drums with a capacity between 150 litres and 1 000 litresCEN 6/7/2014

I.S. EN 14901:2014Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) ofductile iron fittings and accessories - Requirements and test methods CEN 10/25/2014

I.S. EN 14908-1:2014Open Data Communication in Building Automation, Controls and BuildingManagement - Control Network Protocol - Part 1: Protocol Stack CEN 5/10/2014

I.S. EN 14908-2:2014Open Data Communication in Building Automation, Controls and BuildingManagement - Control Network Protocol - Part 2: Twisted Pair Communication CEN 5/10/2014

I.S. EN 14908-3:2014Open Data Communication in Building Automation, Controls and BuildingManagement - Control Network Protocol - Part 3: Power Line ChannelSpecification

CEN 5/10/2014

I.S. EN 14908-4:2014Open Data Communication in Building Automation, Controls and BuildingManagement - Control Network Protocol - Part 4: IP Communication CEN 5/10/2014

I.S. EN 15011:2011+A1:2014 Cranes - Bridge and gantry cranes CEN 3/1/2014

I.S. EN 15039:2014Chemicals used for treatment of water intended for human consumption -Antiscalants for membranes - Polycarboxilic acids and salts CEN 3/29/2014

I.S. EN 15040:2014Chemicals used for treatment of water intended for human consumption -Antiscalants for membranes - Phosphonic acids and salts CEN 3/29/2014

I.S. EN 15041:2014Chemicals used for treatment of water intended for human consumption -Antiscalants for membranes - Polyphosphates CEN 3/29/2014

I.S. EN 15074:2014 Chemicals used for treatment of swimming pool water - Ozone CEN 12/1/2014

I.S. EN 15165:2014Food processing machinery - Forming machines - Safety and hygienerequirements CEN 11/26/2014

I.S. EN 15180:2014 Food processing machinery - Food depositors - Safety and hygienerequirements

CEN 11/26/2014



Reference Title En Origin Body Publication D..I.S. EN 15165:2014Food processing machinery - Forming machines - Safety and hygienerequirements CEN 11/26/2014

I.S. EN 15180:2014Food processing machinery - Food depositors - Safety and hygienerequirements CEN 11/26/2014

I.S. EN 15195:2014Liquid petroleum products - Determination of ignition delay and derived cetanenumber (DCN) of middle distillate fuels by combustion in a constant volumechamber

CEN 12/1/2014

I.S. EN 15207:2014Tanks for the transport of dangerous goods - Plug/socket connection and supplycharacteristics for service equipment in hazardous areas with 24 V nominalsupply voltage

CEN 12/27/2014

I.S. EN 15208:2014Tanks for transport of dangerous goods - Sealed parcel delivery systems -Working principles and interface specifications CEN 5/17/2014

I.S. EN 15254-6:2014Extended application of results from fire resistance tests - Non-loadbearing walls- Part 6: Curtain walling CEN 2/10/2014

I.S. EN 15306:2014 Surfaces for outdoor sports areas - Exposure of synthetic turf to simulated wearCEN 2/10/2014

I.S. EN 15346:2014Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC)recyclates CEN 11/26/2014

I.S. EN 15348:2014Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate)(PET) recyclates CEN 11/26/2014

I.S. EN 15362:2014 Chemicals used for treatment of swimming pool water - Sodium carbonate CEN 5/31/2014

I.S. EN 15363:2014 Chemicals used for treatment of swimming pool water - Chlorine CEN 5/31/2014

I.S. EN 15376:2014Automotive fuels - Ethanol as a blending component for petrol - Requirementsand test methods CEN 11/1/2014

I.S. EN 15380-5:2014Railway applications - Classification system for railway vehicles - Part 5: SystemBreakdown Structure (SBS) CEN 9/20/2014

I.S. EN 15457:2014Paints and varnishes - Laboratory method for testing the efficacy of filmpreservatives in a coating against fungi CEN 9/6/2014

I.S. EN 15458:2014Paints and varnishes - Laboratory method for testing the efficacy of filmpreservatives in a coating against algae CEN 9/6/2014

I.S. EN 15467:2014Food processing machinery - Fish heading and filleting machines - Safety andhygiene requirements CEN 12/27/2014

I.S. EN 15497:2014Structural finger jointed solid timber - Performance requirements and minimumproduction requirements CEN 5/10/2014

I.S. EN 15502-2-2:2014Gas-fired central heating boilers - Part 2-2: Specific standard for type B1appliances CEN 8/16/2014

I.S. EN 15509:2014 Electronic fee collection - Interoperability application profile for DSRC CEN 9/20/2014

I.S. EN 15513:2014 Chemicals used for treatment of swimming pool water - Carbon dioxide CEN 3/29/2014

I.S. EN 15514:2014 Chemicals used for treatment of swimming pool water - Hydrochloric acid CEN 5/31/2014

I.S. EN 15534-4:2014Composites made from cellulose-based materials and thermoplastics (usuallycalled wood-polymer composites (WPC) or natural fibre composites (NFC)) -Part 4: Specifications for decking profiles and tiles

CEN 2/1/2014

I.S. EN 15534-5:2014Composites made from cellulose-based materials and thermoplastics (usuallycalled wood-polymer composites (WPC) or natural fibre composites (NFC)) -Part 5: Specifications for cladding profiles and tiles

CEN 2/1/2014

I.S. EN 15571:2014Machines and plants for mining and tooling of natural stone - Safety -Requirements for surface finishing machines CEN 12/13/2014

I.S. EN 15619:2014Rubber or plastic coated fabrics - Safety of temporary structures (tents) -Specification for coated fabrics intended for tents and related structures CEN 4/5/2014

I.S. EN 15628:2014 Maintenance - Qualification of maintenance personnel CEN 8/30/2014

I.S. EN 15751:2014Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with dieselfuel - Determination of oxidation stability by accelerated oxidation method CEN 4/5/2014

I.S. EN 15752-1:2014Glass in building - Adhesive backed polymeric film - Part 1: Definitions andrequirements CEN 8/23/2014

I.S. EN 15755-1:2014Glass in building - Adhesive backed polymeric filmed glass - Part 1: Definitionsand requirements CEN 8/30/2014

I.S. EN 15804:2012+A1:2013Sustainability of construction works - Environmental product declarations - Corerules for the product category of construction products CEN 3/12/2014

I.S. EN 15811:2014Agricultural machinery - Fixed guards and interlocked guards with or withoutguard locking for moving transmission parts (ISO/TS 28923:2012 modified) CEN 12/20/2014

I.S. EN 15888:2014 Transportable gas cylinders - Cylinder bundles - Periodic inspection and testing CEN 4/12/2014

I.S. EN 15910:2014Water quality - Guidance on the estimation of fish abundance with mobilehydroacoustic methods CEN 2/1/2014

I.S. EN 15939:2011+A1:2014Hardware for furniture - Strength and loading capacity of wall attachmentdevices CEN 10/2/2014

I.S. EN 15999-1:2014 Conservation of cultural heritage - Guidelines for design of showcases forexhibition and preservation of objects - Part 1: General requirements

CEN 3/15/2014



Reference Title En Origin Body Publication D..I.S. EN 15939:2011+A1:2014Hardware for furniture - Strength and loading capacity of wall attachmentdevices CEN 10/2/2014

I.S. EN 15999-1:2014Conservation of cultural heritage - Guidelines for design of showcases forexhibition and preservation of objects - Part 1: General requirements CEN 3/15/2014

I.S. EN 16019:2014Railway applications - Automatic coupler - Performance requirements, specificinterface geometry and test method CEN 4/5/2014

I.S. EN 16034:2014Pedestrian doorsets, industrial, commercial, garage doors and openablewindows - Product standard, performance characteristics - Fire resisting and/orsmoke control characteristics

CEN 10/18/2014

I.S. EN 16070:2014Products used for treatment of water intended for human consumption - Naturalzeolite CEN 4/5/2014

I.S. EN 16146:2012+A1:2014Sanitary tapware - Extractable shower hoses for sanitary tapware for supplysystems type 1 and type 2 - General technical specification CEN 12/1/2014

I.S. EN 16191:2014 Tunnelling machinery - Safety requirements CEN 6/7/2014

I.S. EN 16203:2014Safety of Industrial Trucks - Dynamic tests for verification of lateral stability -Counterbalanced Trucks CEN 6/21/2014

I.S. EN 16207:2014Railway applications - Braking - Functional and performance criteria of MagneticTrack Brake systems for use in railway rolling stock CEN 9/6/2014

I.S. EN 16224:2012+A1:2014 Healthcare provision by chiropractors CEN 2/10/2014

I.S. EN 16228-1:2014 Drilling and foundation equipment - Safety - Part 1: Common requirements CEN 6/7/2014

I.S. EN 16228-2:2014Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil andgeotechnical engineering, quarrying and mining CEN 6/7/2014

I.S. EN 16228-3:2014Drilling and foundation equipment - Safety - Part 3: Horizontal directionaldrilling equipment (HDD) CEN 6/7/2014

I.S. EN 16228-4:2014 Drilling and foundation equipment - Safety - Part 4: Foundation equipment CEN 6/7/2014

I.S. EN 16228-5:2014Drilling and foundation equipment - Safety - Part 5: Diaphragm wallingequipment CEN 6/7/2014

I.S. EN 16228-6:2014Drilling and foundation equipment - Safety - Part 6: Jetting, grouting andinjection equipment CEN 6/7/2014

I.S. EN 16228-7:2014Drilling and foundation equipment - Safety - Part 7: Interchangeable auxiliaryequipment CEN 6/7/2014

I.S. EN 16247-2:2014Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CEN 6/25/2014



I.S. EN 16264:2014Pyrotechnic articles - Other pyrotechnic articles - Cartridges for powder actuatedtools CEN 9/20/2014

I.S. EN 16272-3-2:2014Railway applications - Track - Noise barriers and related devices acting onairborne sound propagation - Test method for determining the acousticperformance - Part 3-2: Normalized railway noise spectrum and single number ..

CEN 8/2/2014

I.S. EN 16272-6:2014Railway applications - Track - Noise barriers and related devices acting onairborne sound propagation - Test method for determining the acousticperformance - Part 6: Intrinsic characteristics - In situ values of airborne soun..

CEN 11/8/2014

I.S. EN 16287-1:2014Glass packaging - Screw finishes for pressure capsules - Part 1: Returnableglass MCA 1 finish CEN 3/29/2014

I.S. EN 16287-2:2014Glass packaging - Screw finishes for pressure capsules - Part 2: One way glassMCA 1 finish CEN 3/29/2014

I.S. EN 16288-1:2014Glass packaging - Screw finishes for pressure capsules - Part 1: Returnableglass MCA 3 finish CEN 3/29/2014

I.S. EN 16288-2:2014Glass packaging - Screw finishes for pressure capsules - Part 2: One way glassMCA 3 finish CEN 3/29/2014

I.S. EN 16290-1:2014Glass packaging - Screw finishes for pressure capsules - Part 1: Returnableglass MCA 7,5 R finish CEN 3/29/2014

I.S. EN 16290-2:2014Glass packaging - Screw finishes for pressure capsules - Part 2: One way glassMCA 7,5 R finish CEN 3/29/2014

I.S. EN 16291-2:2013/AC:2014Glass packaging - Screw finishes for pressure capsules - Part 2: One way glassMCA 2 finish CEN 8/23/2014

I.S. EN 16307-6:2014Industrial trucks - Safety requirements and verification - Part 6: Supplementaryrequirements for burden and personnel carriers CEN 4/12/2014

I.S. EN 16309:2014+A1:2014Sustainability of construction works - Assessment of social performance ofbuildings - Calculation methodology CEN 9/9/2014

I.S. EN 16315:2014Textiles - Silk woven fabrics for womenswear, silk squares, scarves and ties -Requirements and test methods CEN 4/5/2014

I.S. EN 16323:2014 Glossary of wastewater engineering terms CEN 4/29/2014

I.S. EN 16327:2014 Fire-fighting - Positive-pressure proportioning systems (PPPS) andcompressed-air foam systems (CAFS)

CEN 2/22/2014



Reference Title En Origin Body Publication D..I.S. EN 16323:2014 Glossary of wastewater engineering terms CEN 4/29/2014

I.S. EN 16327:2014Fire-fighting - Positive-pressure proportioning systems (PPPS) andcompressed-air foam systems (CAFS) CEN 2/22/2014

I.S. EN 16334:2014 Railway applications - Passenger Alarm System - System requirements CEN 8/23/2014

I.S. EN 16340:2014Safety and control devices for burners and appliances burning gaseous or liquidfuels - Combustion product sensing devices CEN 7/12/2014

I.S. EN 16350:2014 Protective gloves - Electrostatic properties CEN 5/10/2014

I.S. EN 16397-1:2014 Flexible couplings - Part 1: Performance requirements CEN 11/26/2014

I.S. EN 16397-2:2014Flexible couplings - Part 2: Characteristics and testing for metal banded flexiblecouplings, adaptors and bushes CEN 11/26/2014

I.S. EN 16407-1:2014Non-destructive testing - Radiographic inspection of corrosion and deposits inpipes by X- and gamma rays - Part 1: Tangential radiographic inspection CEN 1/25/2014

I.S. EN 16407-2:2014Non-destructive testing - Radiographic inspection of corrosion and deposits inpipes by X- and gamma rays - Part 2: Double wall radiographic inspection CEN 1/25/2014

I.S. EN 16413:2014 Ambient air - Biomonitoring with lichens - Assessing epiphytic lichen diversity CEN 3/8/2014

I.S. EN 16414:2014Ambient air - Biomonitoring with mosses - Accumulation of atmosphericcontaminants in mosses collected in situ: from the collection to the preparationof samples

CEN 3/8/2014

I.S. EN 16418:2014Paper and board - Determination of the cytotoxicity of aqueous extracts using ametabolically competent hepatoma cell line (HepG2) CEN 4/12/2014

I.S. EN 16419:2014Leather - Chamois leather for cleaning purposes - Classification andrequirements CEN 2/1/2014

I.S. EN 16421:2014Influence of materials on water for human consumption - Enhancement ofmicrobial growth (EMG) CEN 12/27/2014

I.S. EN 16424:2014Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CEN 11/5/2014

I.S. EN 16425:2014 Simple Publishing Interface CEN 7/26/2014

I.S. EN 16431:2014 Railway applications - Track - Hollow sleepers and bearers CEN 8/2/2014

I.S. EN 16433:2014-2014-08 Internal blinds - Protection from strangulation hazards - Test methods CEN 3/1/2014

I.S. EN 16434:2014-2014-08Internal blinds - Protection from strangulation hazards - Requirements and testmethods for safety devices CEN 8/25/2014

I.S. EN 16437:2014Chemical disinfectants and antiseptics - Quantitative surface test for theevaluation of bactericidal activity of chemical disinfectants and antiseptics usedin veterinary area on porous surfaces without mechanical action - Test method..

CEN 3/8/2014

I.S. EN 16438:2014Chemical disinfectants and antiseptics - Quantitative surface test for theevaluation of fungicidal or yeasticidal activity of chemical disinfectants andantiseptics used in the veterinary area on non-porous surfaces without mechan..

CEN 3/8/2014

I.S. EN 16447:2014 Explosion isolation flap valves CEN 7/26/2014

I.S. EN 16449:2014Wood and wood-based products - Calculation of the biogenic carbon content ofwood and conversion to carbon dioxide CEN 3/22/2014

I.S. EN 16453:2014Pulp, paper and paperboard - Determination of phthalates in extracts frompaper and paperboard CEN 2/10/2014

I.S. EN 16455:2014Conservation of cultural heritage - Extraction and determination of soluble saltsin natural stone and related materials used in and from cultural heritage CEN 9/27/2014

I.S. EN 16457:2014Characterization of waste - Framework for the preparation and application of atesting programme - Objectives, planning and report CEN 3/22/2014

I.S. EN 16472:2014Plastics - Method for artificial accelerated photoageing using medium pressuremercury vapour lamps CEN 4/12/2014

I.S. EN 16476:2014Liquid petroleum products - Determination of Sodium, Potassium, Calcium,Phosphorus, Copper and Zinc contents in diesel fuel - Method via InductivelyCoupled Plasma Optical Emission Spectrometry (ICP OES)

CEN 5/17/2014

I.S. EN 16479:2014Water quality - Performance requirements and conformity test procedures forwater monitoring equipment - Automated sampling devices (samplers) for waterand waste water

CEN 7/19/2014

I.S. EN 16481:2014 Timber stairs - Structural design - Calculation methods CEN 7/5/2014

I.S. EN 16482:2014 Founding - Continuous cast iron bars CEN 6/28/2014

I.S. EN 16483:2014 Leather - Labelling of leather trims in textile products CEN 2/1/2014

I.S. EN 16485:2014Round and sawn timber - Environmental Product Declarations - Productcategory rules for wood and wood-based products for use in construction CEN 4/5/2014

I.S. EN 16486:2014Machines for compacting waste materials or recyclable fractions - Compactors -Safety requirements CEN 8/9/2014

I.S. EN 16487:2014 Acoustics - Test code for suspended ceilings - Sound absorption CEN 12/1/2014



Reference Title En Origin Body Publication D..I.S. EN 16486:2014Machines for compacting waste materials or recyclable fractions - Compactors -Safety requirements CEN 8/9/2014

I.S. EN 16487:2014 Acoustics - Test code for suspended ceilings - Sound absorption CEN 12/1/2014

I.S. EN 16489-1:2014Professional indoor UV exposure services - Part 1: Requirements for theprovision of training CEN 4/19/2014

I.S. EN 16489-2:2014Professional indoor UV exposure services - Part 2: Required qualification andcompetence of the indoor UV exposure consultant CEN 12/27/2014

I.S. EN 16489-3:2014Professional indoor UV exposure services - Part 3: Requirements for theprovision of services CEN 12/27/2014

I.S. EN 16492:2014Paints and varnishes - Evaluation of the surface disfigurement caused by fungiand algae on coatings CEN 6/28/2014

I.S. EN 16493:2014Water quality - Nomenclatural requirements for the recording of biodiversitydata, taxonomic checklists and keys CEN 9/13/2014

I.S. EN 16495:2014Air Traffic Management - Information security for organisations supporting civilaviation operations CEN 2/1/2014

I.S. EN 16500:2014Machines for compacting waste materials or recyclable fractions - Vertical balingpresses - Safety requirements CEN 8/23/2014

I.S. EN 16502:2014Test method for the determination of the degree of soil acidity according toBaumann-Gully CEN 9/13/2014

I.S. EN 16503:2014Water quality - Guidance standard on assessing the hydromorphologicalfeatures of transitional and coastal waters CEN 9/13/2014

I.S. EN 16506:2014Systems for renovation of drains and sewers - Lining with a rigidly anchoredplastics inner layer (RAPL) CEN 11/1/2014

I.S. EN 16507:2014 Railway applications - Ground based service - Diesel refuelling equipment CEN 10/18/2014

I.S. EN 16509:2014Transportable gas cylinders - Non-refillable, small transportable, steel cylindersof capacities up to and including 120 ml containing compressed or liquefiedgases (compact cylinders) - Design, construction, filling and testing

CEN 11/1/2014

I.S. EN 16511:2014Loose-laid panels - Semi-rigid multilayer modular floor covering (MMF) panelswith wear resistant top layer CEN 5/31/2014

I.S. EN 16521:2014Cosmetics - Analytical methods - GC/MS method for the identification and assayof 12 phthalates in cosmetic samples ready for analytical injection CEN 5/17/2014

I.S. EN 16522:2014Tanks for transport of dangerous goods - Service equipment for tanks - Flamearresters for breather devices CEN 5/10/2014

I.S. EN 16556:2014Determination of the maximum open time for thermoplastic wood adhesives fornon-structural applications CEN 11/26/2014

I.S. EN 16564:2014Machines and plants for mining and tooling of natural stone - Safety -Requirements for bridge type sawing/milling machines, included numericalcontrol (NC/CNC) versions

CEN 12/20/2014

I.S. EN 16565:2014Packaging - Flexible tubes - Test method to determine the orientation of theflip-top cap CEN 9/13/2014

I.S. EN 16566:2014Paints and varnishes - Fillers for internal and/or external works - Adaptation offillers to European standards CEN 7/1/2014

I.S. EN 16570:2014Information technology - Notification of RFID - The information sign andadditional information to be provided by operators of RFID application systems CEN 8/2/2014

I.S. EN 16571:2014 Information technology - RFID privacy impact assessment process CEN 7/12/2014

I.S. EN 16575:2014 Bio-based products - Vocabulary CEN 8/30/2014

I.S. EN 16576:2014Automotive fuels - Determination of manganese and iron content in diesel -Inductively coupled plasma optical emission spectrometry (ICP OES) method CEN 12/1/2014

I.S. EN 16590-1:2014Tractors and machinery for agriculture and forestry - Safety-related parts ofcontrol systems - Part 1: General principles for design and development (ISO25119-1:2010 modified)

CEN 5/3/2014

I.S. EN 16590-2:2014Tractors and machinery for agriculture and forestry - Safety-related parts ofcontrol systems - Part 2: Concept phase (ISO 25119-2:2010 modified) CEN 5/3/2014

I.S. EN 16590-3:2014Tractors and machinery for agriculture and forestry - Safety-related parts ofcontrol systems - Part 3: Series development, hardware and software (ISO25119-3:2010 modified)

CEN 5/3/2014

I.S. EN 16590-4:2014Tractors and machinery for agriculture and forestry - Safety-related parts ofcontrol systems - Part 4: Production, operation, modification and supportingprocesses (ISO 25119-4:2010 modified)

CEN 5/3/2014

I.S. EN 16592:2014 Packaging - Rigid plastic containers - PET finish 29/25 (12,6) CEN 11/26/2014

I.S. EN 16593:2014 Packaging - Rigid plastic containers - PET finish BVS 30H60 CEN 11/26/2014

I.S. EN 16594:2014 Packaging - Rigid plastic containers - PET finish 26/22 (12,0) CEN 11/26/2014

I.S. EN 16601-10-01:2014 Space project management - Part 10-01: Organization and conduct of reviews CEN 9/6/2014

I.S. EN 16601-40:2014 Space project management - Configuration and information management CEN 9/6/2014

I.S. EN 16601-60:2014 Space project management - Cost and schedule management CEN 9/6/2014



Reference Title En Origin Body Publication D..I.S. EN 16601-40:2014 Space project management - Configuration and information management CEN 9/6/2014

I.S. EN 16601-60:2014 Space project management - Cost and schedule management CEN 9/6/2014

I.S. EN 16601-80:2014 Space project management - Part 80: Risk management CEN 9/6/2014

I.S. EN 16602-10-04:2014 Space product assurance - Critical-item control CEN 9/27/2014

I.S. EN 16602-10-09:2014 Space product assurance - Nonconformance control system CEN 9/27/2014

I.S. EN 16602-20-10:2014 Space product assurance - Off-the-shelf items utilization in space systems CEN 10/4/2014

I.S. EN 16602-20:2014 Space product assurance - Quality assurance CEN 10/4/2014

I.S. EN 16602-30-02:2014Space product assurance - Failure modes, effects (and criticality) analysis(FMEA/FMECA) CEN 10/4/2014

I.S. EN 16602-30-09:2014 Space product assurance - Availability analysis CEN 10/4/2014

I.S. EN 16602-30-11:2014 Space product assurance - Derating - EEE components CEN 10/11/2014

I.S. EN 16602-40-02:2014 Space product assurance - Hazard analysis CEN 10/4/2014

I.S. EN 16602-40-12:2014 Space product assurance - Fault tree analysis - Adoption notice ECSS/IEC 61025CEN 10/11/2014

I.S. EN 16602-60-02:2014 Space product assurance - ASIC and FPGA development CEN 10/11/2014

I.S. EN 16602-60-05:2014 Space product assurance - Generic procurement requirements for hybrids CEN 10/4/2014

I.S. EN 16602-60-12:2014Space product assurance - Design, selection, procurement and use of die formmonolithic microwave integrated circuits (MMICs) CEN 10/11/2014

I.S. EN 16602-60-14:2014 Space product assurance - Relifing procedure - EEE components CEN 10/11/2014

I.S. EN 16602-60-15:2014 Space product assurance - Radiation hardness assurance - EEE components CEN 10/11/2014

I.S. EN 16602-70-01:2014 Space product assurance - Cleanliness and contamination control CEN 10/25/2014

I.S. EN 16602-70-02:2014Space product assurance - Thermal vacuum outgassing test for the screening ofspace materials CEN 10/25/2014

I.S. EN 16602-70-03:2014 Space product assurance - Black-anodizing of metals with inorganic dyes CEN 10/25/2014

I.S. EN 16602-70-04:2014Space product assurance - Thermal testing for the evaluation of spacematerials, processes, mechanical parts and assemblies CEN 10/25/2014

I.S. EN 16602-70-05:2014Space product assurance - Detection of organic contamination surfaces byinfrared spectroscopy CEN 10/25/2014

I.S. EN 16602-70-06:2014 Space product assurance - Particle and UV radiation testing for space materials CEN 10/25/2014

I.S. EN 16602-70-07:2014Space product assurance - Verification and approval of automatic machine wavesoldering CEN 10/25/2014

I.S. EN 16602-70-18:2014Space product assurance - Preparation, assembly and mounting of RF coaxialcables CEN 11/8/2014

I.S. EN 16602-70-20:2014Space product assurance - Determination of the susceptibility of silver-platedcopper wire and cable to "red-plague" corrosion CEN 11/8/2014

I.S. EN 16602-70-21:2014Space product assurance - Flammability testing for the screening of spacematerials CEN 11/8/2014

I.S. EN 16602-70-22:2014 Space product assurance - Control of limited shelf-life materials CEN 11/26/2014

I.S. EN 16602-70-26:2014 Space product assurance - Crimping of high-reliability electrical connections CEN 11/26/2014

I.S. EN 16602-70-28:2014Space product assurance - Repair and modification of printed circuit boardassemblies for space use CEN 11/26/2014

I.S. EN 16602-70-29:2014Space product assurance - Determination of offgassing products from materialsand assembled articles to be used in a manned space vehicle crew compartmentCEN 11/26/2014

I.S. EN 16602-70-30:2014Space product assurance - Wire wrapping of high-reliability electricalconnections CEN 11/26/2014

I.S. EN 16602-70-31:2014 Space product assurance - Application of paints and coatings on space hardwareCEN 11/26/2014

I.S. EN 16602-70-36:2014Space product assurance - Material selection for controlling stress-corrosioncracking CEN 11/26/2014

I.S. EN 16602-70-37:2014 Space product assurance - Determination of the susceptibility of metals tostress-corrosion cracking

CEN 11/26/2014



Reference Title En Origin Body Publication D..I.S. EN 16602-70-36:2014Space product assurance - Material selection for controlling stress-corrosioncracking CEN 11/26/2014

I.S. EN 16602-70-37:2014Space product assurance - Determination of the susceptibility of metals tostress-corrosion cracking CEN 11/26/2014

I.S. EN 16602-70-45:2014 Space product assurance - Mechanical testing of metallic materials CEN 11/26/2014

I.S. EN 16602-70-46:2014Space product assurance - Requirements for manufacturing and procurement ofthreaded fasteners CEN 11/26/2014

I.S. EN 16603-10-03:2014 Space engineering - Testing CEN 9/6/2014

I.S. EN 16603-10-06:2014 Space engineering - Part 10-06: Technical requirements specification CEN 9/13/2014

I.S. EN 16603-10-09:2014 Space engineering - Reference coordinate system CEN 7/26/2014

I.S. EN 16603-10-11:2014 Space engineering - Human factors engineering CEN 7/26/2014

I.S. EN 16603-10-12:2014Space engineering - Method for the calculation of radiation received and itseffects, and a policy for design margins CEN 7/26/2014

I.S. EN 16603-20-06:2014 Space engineering - Spacecraft charging CEN 7/26/2014

I.S. EN 16603-20-07:2014 Space engineering - Electromagnetic compatibility CEN 7/26/2014

I.S. EN 16603-20-08:2014 Space engineering - Part 20-08: Photovoltaic assemblies and components CEN 9/13/2014

I.S. EN 16603-31:2014 Space engineering - Thermal control general requirements CEN 10/11/2014

I.S. EN 16603-32-01:2014 Space engineering - Fracture control CEN 8/30/2014

I.S. EN 16603-32-02:2014 Space engineering - Structural design and verification of pressurized hardware CEN 8/30/2014

I.S. EN 16603-32-03:2014 Space engineering - Structural finite element models CEN 8/30/2014

I.S. EN 16603-32-10:2014 Space engineering - Structural factors of safety for spaceflight hardware CEN 8/30/2014

I.S. EN 16603-32-11:2014 Space engineering - Modal survey assessment CEN 9/13/2014

I.S. EN 16603-32:2014 Space engineering - Structural general requirements CEN 8/30/2014

I.S. EN 16603-34:2014 Space engineering - Part 34: Environmental control and life support (ECLS) CEN 9/13/2014

I.S. EN 16603-35-01:2014 Space engineering - Liquid and electric propulsion for spacecraft CEN 9/27/2014

I.S. EN 16603-35-02:2014 Space engineering - Solid propulsion for spacecrafts and launchers CEN 9/27/2014

I.S. EN 16603-35-03:2014 Space engineering - Liquid propulsion for launchers CEN 9/27/2014

I.S. EN 16603-35-06:2014Space engineering - Cleanliness requirements for spacecraft propulsionhardware CEN 9/27/2014

I.S. EN 16603-35-10:2014Space engineering - Compatibility testing for liquid propulsion components,subsystems and systems CEN 9/27/2014

I.S. EN 16603-35:2014 Space engineering - Propulsion general requirements CEN 9/27/2014

I.S. EN 16603-40:2014 Space engineering - Part 40: Software CEN 9/13/2014

I.S. EN 16603-50-01:2014Space engineering - Space data links - Telemetry synchronization and channelcoding CEN 10/11/2014

I.S. EN 16603-50-02:2014 Space engineering - Ranging and Doppler tracking CEN 9/27/2014

I.S. EN 16603-50-03:2014 Space engineering - Space data links - Telemetry transfer frame protocol CEN 10/11/2014

I.S. EN 16603-50-04:2014Space engineering - Space data links - Telecommand protocols, synchronizationand channel coding CEN 10/11/2014

I.S. EN 16603-50-05:2014 Space engineering - Radio frequency and modulation CEN 9/27/2014

I.S. EN 16603-50-13:2014Space engineering - Interface and communication protocol for MIL-STD-1553Bdata bus onboard spacecraft CEN 9/27/2014

I.S. EN 16603-50-14:2014 Space engineering - Spacecraft discrete interfaces CEN 9/27/2014

I.S. EN 16603-50-51:2014 Space engineering - SpaceWire protocol identification CEN 9/27/2014



Reference Title En Origin Body Publication D..I.S. EN 16603-50-14:2014 Space engineering - Spacecraft discrete interfaces CEN 9/27/2014

I.S. EN 16603-50-51:2014 Space engineering - SpaceWire protocol identification CEN 9/27/2014

I.S. EN 16603-50-52:2014 Space engineering - SpaceWire - Remote memory access protocol CEN 9/27/2014

I.S. EN 16603-50:2014 Space engineering - Communications CEN 9/27/2014

I.S. EN 16603-60-10:2014 Space engineering - Control performances CEN 9/27/2014

I.S. EN 16603-60-20:2014 Space engineering - Star sensor terminology and performance specification CEN 9/27/2014

I.S. EN 16603-70-32:2014 Space engineering - Test and operations procedure language CEN 10/4/2014

I.S. EN 16604-10:2014Space sustainability - Adoption Notice of ISO 24113: Space systems - Spacedebris mitigation requirements CEN 10/4/2014

I.S. EN 16644:2014Pumps - Rotodynamic pumps - Glandless circulators having a rated power inputnot exceeding 200 W for heating installations and domestic hot waterinstallations - Noise test code (vibro-acoustics) for measuring structure- and fl..

CEN 12/27/2014

I.S. EN 16656:2014Information technology - Radio frequency identification for item management -RFID Emblem (ISO/IEC 29160:2012, modified) CEN 7/5/2014

I.S. EN 16701:2014 Energetic materials for defence - Safety, vulnerability - Friability CEN 5/31/2014

I.S. EN 28510-1:2014Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly -Part 1: 90Âº peel CEN 4/12/2014

I.S. EN 50125-1:2014Railway applications - Environmental conditions for equipment - Part 1: Rollingstock and on-board equipment CENELEC 4/15/2014

I.S. EN 50130-4:2011/A1:2014Alarm systems - Part 4: Electromagnetic compatibility - Product family standard:Immunity requirements for components of fire, intruder, hold up, CCTV, accesscontrol and social alarm systems

CENELEC 11/14/2014

I.S. EN 50131-2-2:2008/IS1:2014Alarm systems - Intrusion and hold-up systems - Part 2-2: Intrusion detectors -Passive infrared detectors CENELEC 3/11/2014

I.S. EN 50131-2-3:2008/IS1:2014Alarm systems - Intrusion and hold-up systems - Part 2-3: Requirements formicrowave detectors CENELEC 3/11/2014

I.S. EN 50131-2-4:2008/IS1:2014Alarm systems - Intrusion and hold-up systems - Part 2-4: Requirements forcombined passive infrared and microwave detectors CENELEC 3/11/2014

I.S. EN 50131-2-5:2008/IS1:2014Alarm systems - Intrusion and hold-up systems - Part 2-5: Requirements forcombined passive infrared and ultrasonic detectors CENELEC 3/11/2014

I.S. EN 50131-2-6:2008/IS1:2014Alarm systems - Intrusion and hold-up systems - Part 2-6: Opening contacts(magnetic) CENELEC 3/11/2014

I.S. EN50131-2-7-1:2012+A1:2013+IS1:2014

Alarm systems - Intrusion and hold-up systems - Part 2-7-1: Intrusion detectors- Glass break detectors (acoustic) CENELEC 3/11/2014

I.S. EN50131-2-7-2:2012+A1:2013+IS1:2014

Alarm systems - Intrusion and hold-up systems - Part 2-7-2: Intrusion detectors- Glass break detectors (passive) CENELEC 3/11/2014

I.S. EN50131-2-7-3:2012+A1:2013+IS1:2014

Alarm systems - Intrusion and hold-up systems - Part 2-7-3: Intrusion detectors- Glass break detectors (active) CENELEC 3/11/2014

I.S. EN 50131-6:2008/A1:2014 Alarm systems - Intrusion and hold-up systems - Part 6: Power supplies CENELEC 7/1/2014

I.S. EN 50131-10:2014Alarm systems - Intrusion and hold-up systems - Part 10: Application specificrequirements for Supervised Premises Transceiver (SPT) CENELEC 6/24/2014

I.S. EN 50153:2014Railway applications - Rolling stock - Protective provisions relating to electricalhazards CENELEC 6/24/2014

I.S. EN 50174-1:2009/A2:2014Information technology - Cabling installation - Part 1: Installation specificationand quality assurance CENELEC 11/6/2014

I.S. EN 50174-2:2009/A2:2014Information technology - Cabling installation - Part 2: Installation planning andpractices inside buildings CENELEC 11/6/2014

I.S. EN 50238-1:2003/AC:2014Railway applications - Compatibility between rolling stock and train detectionsystems CENELEC 11/27/2014

I.S. EN 50299-1:2014Oil-immersed cable connection assemblies for transformers and reactors havinghighest voltage for equipment Um from 72,5 kV to 550 kV - Part 1: Fluid-filledcable terminations

CENELEC 12/3/2014

I.S. EN 50299-2:2014Oil-immersed cable connection assemblies for transformers and reactors havinghighest voltage for equipment Um from 72,5 kV to 550 kV - Part 2: Dry-typecable terminations

CENELEC 12/3/2014

I.S. EN 50343:2014 Railway applications - Rolling stock - Rules for installation of cabling CENELEC 6/9/2014

I.S. EN 50407-3:2014Multi-pair cables used in high bit rate digital access telecommunicationsnetworks - Part 3: Indoor multi-pair/quad riser cables up to 100 MHz formaximum length of connection 100 m supporting universal services, xDSL and ..

CENELEC 6/24/2014

I.S. EN 50434:2014Safety of household and similar appliances - Particular requirements for mainsoperated shredders and chippers CENELEC 6/25/2014

I.S. EN 50436-1:2014Alcohol interlocks - Test methods and performance requirements - Part 1:Instruments for drink-driving-offender programs CENELEC 2/14/2014

I.S. EN 50436-2:2014 Alcohol interlocks - Test methods and performance requirements - Part 2:Instruments having a mouthpiece and measuring breath alcohol for generalpreventive use

CENELEC 2/14/2014



Reference Title En Origin Body Publication D..I.S. EN 50436-1:2014Alcohol interlocks - Test methods and performance requirements - Part 1:Instruments for drink-driving-offender programs CENELEC 2/14/2014

I.S. EN 50436-2:2014Alcohol interlocks - Test methods and performance requirements - Part 2:Instruments having a mouthpiece and measuring breath alcohol for generalpreventive use

CENELEC 2/14/2014

I.S. EN 50491-6-1:2014General requirements for Home and Building Electronic Systems (HBES) andBuilding Automation and Control Systems (BACS) - Part 6-1: HBES installations -Installation and planning

CENELEC 1/28/2014

I.S. EN 50492:2008/A1:2014Basic standard for the in-situ measurement of electromagnetic field strengthrelated to human exposure in the vicinity of base stations CENELEC 4/9/2014

I.S. EN 50516-3-1:2014Industrial connector sets and interconnect components to be used in opticalfibre control and communication systems - Product specifications - Part 3-1:Type ODVA APC terminated on EN 60793-2-50 category B1.1 and B1.3 singlem..

CENELEC 6/24/2014

I.S. EN 50526-2:2014Railway applications - Fixed installations - D.C. surge arresters and voltagelimiting devices - Part 2: Voltage limiting devices CENELEC 3/11/2014

I.S. EN 50539-11:2013/A1:2014Low-voltage surge protective devices - Surge protective devices for specificapplication including d.c. - Part 11: Requirements and tests for SPDs inphotovoltaic applications

CENELEC 10/21/2014

I.S. EN 50548:2011/A2:2014 Junction boxes for photovoltaic modules CENELEC 12/10/2014

I.S. EN 50550:2011/A1:2014Power frequency overvoltage protective device for household and similarapplications (POP) CENELEC 9/29/2014

I.S. EN 50565-1:2014Electric cables - Guide to use for cables with a rated voltage not exceeding450/750 V (U0/U) - Part 1: General guidance CENELEC 4/15/2014

I.S. EN 50575:2014Power, control and communication cables - Cables for general applications inconstruction works subject to reaction to fire requirements CENELEC 10/7/2014

I.S. EN 50585:2014Communications protocol to transport satellite delivered signals over IPnetworks CENELEC 6/24/2014

I.S. EN 50599:2014Generic cabling systems - Specification for the testing of balancedcommunication cabling in accordance with EN 50173-4 - Screened straightpatch cords and straight work area cords for class D applications - Detail specif..

CENELEC 6/24/2014

I.S. EN 50600-2-1:2014Information technology - Data centre facilities and infrastructures - Part 2-1:Building construction CENELEC 4/1/2014

I.S. EN 50600-2-2:2014Information technology - Data centre facilities and infrastructures - Part 2-2:Power distribution CENELEC 4/1/2014

I.S. EN 50600-2-3:2014Information technology - Data centre facilities and infrastructures - Part 2-3:Environmental control CENELEC 10/28/2014

I.S. EN 50601:2014Generic cabling systems - Specification for the testing of balancedcommunication cabling in accordance with EN 50173-4 - Unscreened straightpatch cords and straight work area cords for class D applications - Detail specif..

CENELEC 2/18/2014

I.S. EN 50602:2014Generic cabling systems - Specification for the testing of balancedcommunication cabling in accordance with EN 50173-4 - Unscreened straightpatch cords and straight work area cords for class E applications - Detail specif..

CENELEC 2/18/2014

I.S. EN 50603:2014Generic cabling systems - Specification for the testing of balancedcommunication cabling in accordance with EN 50173-4 - Screened straightpatch cords and straight work area cords for class E applications - Detail specif..

CENELEC 2/18/2014

I.S. EN 50625-1:2014Collection, logistics & Treatment requirements for WEEE - Part 1: Generaltreatment requirements CENELEC 3/18/2014

I.S. EN 50636-2-91:2014Household and similar electrical appliances - Safety - Part 2-91: Particularrequirements for walk-behind and hand-held lawn trimmers and lawn edgetrimmers

CENELEC 7/17/2014

I.S. EN 50636-2-92:2014Household and similar electrical appliances - Safety - Part 2-92: Particularrequirements for pedestrian-controlled mains-operated lawn scarifiers andaerators

CENELEC 7/18/2014

I.S. EN 50636-2-94:2014Household and similar electrical appliances - Safety - Part 2-94: Particularrequirements for scissors type grass shears CENELEC 7/18/2014

I.S. EN 50636-2-100:2014Household and similar electrical appliances - Safety - Part 2-100: Particularrequirements for hand-held mains-operated garden blowers, vacuums andblower vacuums

CENELEC 7/18/2014

I.S. EN 50700:2014Information technology - Premises distribution access network (PDAN) cablingto support deployment of optical broadband networks CENELEC 1/21/2014

I.S. EN 55016-1-1:2010/A2:2014Specification for radio disturbance and immunity measuring apparatus andmethods - Part 1-1: Radio disturbance and immunity measuring apparatus -Measuring apparatus

CENELEC 9/29/2014

I.S. EN 55016-1-2:2014Specification for radio disturbance and immunity measuring apparatus andmethods - Part 1-2: Radio disturbance and immunity measuring apparatus -Coupling devices for conducted disturbance measurements

CENELEC 8/8/2014

I.S. EN 55016-2-1:2014Specification for radio disturbance and immunity measuring apparatus andmethods - Part 2-1: Methods of measurement of disturbances and immunity -Conducted disturbance measurements

CENELEC 8/8/2014

I.S. EN 55016-2-3:2010/A2:2014Specification for radio disturbance and immunity measuring apparatus andmethods - Part 2-3: Methods of measurement of disturbances and immunity -Radiated disturbance measurements

CENELEC 8/12/2014

I.S. EN 55016-4-2:2011/A1:2014Specification for radio disturbance and immunity measuring apparatus andmethods - Part 4-2: Uncertainties, statistics and limit modelling - Measurementinstrumentation uncertainty

CENELEC 8/27/2014

I.S. EN 55020:2007/A11:2011+IS3:2014Sound and television broadcast receivers and associated equipment - Immunitycharacteristics - Limits and methods of measurement CENELEC 3/12/2014

I.S. EN 60034-2-1:2014Rotating electrical machines - Part 2-1: Standard methods for determininglosses and efficiency from tests (excluding machines for traction vehicles) CENELEC 9/26/2014

I.S. EN 60034-8:2007/A1:2014Rotating electrical machines - Part 8: Terminal markings and direction ofrotation CENELEC 6/25/2014

I.S. EN 60034-18-41:2014Rotating electrical machines - Part 18-41: Partial discharge free electricalinsulation systems (Type I) used in rotating electrical machines fed from voltageconverters - Qualification and quality control tests

CENELEC 6/25/2014

I.S. EN 60034-19:2014 Rotating electrical machines - Part 19: Specific test methods for d.c. machineson conventional and rectifier-fed supplies

CENELEC 12/10/2014



Reference Title En Origin Body Publication D..I.S. EN 60034-18-41:2014

Rotating electrical machines - Part 18-41: Partial discharge free electricalinsulation systems (Type I) used in rotating electrical machines fed from voltageconverters - Qualification and quality control tests CENELEC 6/25/2014

I.S. EN 60034-19:2014Rotating electrical machines - Part 19: Specific test methods for d.c. machineson conventional and rectifier-fed supplies CENELEC 12/10/2014

I.S. EN 60034-30-1:2014Rotating electrical machines - Part 30-1: Efficiency classes of line operated ACmotors (IE code) CENELEC 6/25/2014

I.S. EN 60061-1:1993/A27:2014Lamp caps and holders together with gauges for the control ofinterchangeability and safety - Part 1: Lamp caps CENELEC 9/3/2014

I.S. EN 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests CENELEC 11/11/2014

I.S. EN 60079-1:2014Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures"d" CENELEC 10/29/2014

I.S. EN 60079-14:2014Explosive atmospheres - Part 14: Electrical installations design, selection anderection CENELEC 4/8/2014

I.S. EN 60079-17:2014Explosive atmospheres - Part 17: Electrical installations inspection andmaintenance CENELEC 3/26/2014

I.S. EN 60079-29-3:2014Explosive atmospheres - Part 29-3: Gas detectors - Guidance on functionalsafety of fixed gas detection systems CENELEC 7/18/2014

I.S. EN 60079-31:2014Explosive atmospheres - Part 31: Equipment dust ignition protection byenclosure "t" CENELEC 7/30/2014

I.S. EN 60099-4:2014Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c.systems CENELEC 10/2/2014

I.S. EN 60127-2:2014 Miniature fuses - Part 2: Cartridge fuse-links CENELEC 11/17/2014

I.S. EN 60127-6:2014 Miniature fuses - Part 6: Fuse-holders for miniature fuse-links CENELEC 11/17/2014

I.S. EN 60191-4:2014Mechanical standardization of semiconductor devices - Part 4: Coding systemand classification into forms of package outlines for semiconductor devicepackages

CENELEC 9/2/2014

I.S. EN 60214-1:2014 Tap-changers - Part 1: Performance requirements and test methods CENELEC 8/27/2014

I.S. EN 60243-2:2014Electric strength of insulating materials - Test methods - Part 2: Additionalrequirements for tests using direct voltage CENELEC 3/4/2014

I.S. EN 60243-3:2014Electric strength of insulating materials - Test methods - Part 3: Additionalrequirements for 1,2/50 Âµs impulse tests CENELEC 3/4/2014

I.S. EN 60255-27:2014Measuring relays and protection equipment - Part 27: Product safetyrequirements CENELEC 4/8/2014

I.S. EN 60255-121:2014Measuring relays and protection equipment - Part 121: Functional requirementsfor distance protection CENELEC 7/25/2014

I.S. EN 60255-127:2014Measuring relays and protection equipment - Part 127: Functional requirementsfor over/under voltage protection CENELEC 1/21/2014

I.S. EN 60268-4:2014 Sound system equipment - Part 4: Microphones CENELEC 9/17/2014

I.S. EN 60269-1:2007/A2:2014 Low-voltage fuses - Part 1: General requirements CENELEC 9/26/2014

I.S. EN 60282-1:2009/A1:2014 High-voltage fuses - Part 1: Current-limiting fuses CENELEC 10/24/2014

I.S. EN 60299:2014 Household electric blankets - Methods for measuring performance CENELEC 10/14/2014

I.S. EN 60300-1:2014 Dependability management - Part 1: Guidance for management and application CENELEC 10/28/2014

I.S. EN 60317-0-1:2014Specifications for particular types of winding wires - Part 0-1: Generalrequirements - Enamelled round copper wire CENELEC 1/28/2014

I.S. EN 60317-0-2:2014Specifications for particular types of winding wires - Part 0-2: Generalrequirements - Enamelled rectangular copper wire CENELEC 1/28/2014

I.S. EN 60317-20:2014Specifications for particular types of winding wires - Part 20: Solderablepolyurethane enamelled round copper wire, class 155 CENELEC 2/25/2014

I.S. EN 60317-21:2014Specifications for particular types of winding wires - Part 21: Solderablepolyurethane enamelled round copper wire overcoated with polyamide, class155

CENELEC 2/25/2014

I.S. EN 60317-23:2014Specifications for particular types of winding wires - Part 23: Solderablepolyesterimide enamelled round copper wire, class 180 CENELEC 2/25/2014

I.S. EN 60317-27:2014Specifications for particular types of winding wires - Part 27: Paper tape coveredrectangular copper wire CENELEC 2/25/2014

I.S. EN 60317-28:2014Specifications for particular types of winding wires - Part 28: Polyesterimideenamelled rectangular copper wire, class 180 CENELEC 2/25/2014

I.S. EN 60317-35:2014Specifications for particular types of winding wires - Part 35: Solderablepolyurethane enamelled round copper wire, class 155, with a bonding layer CENELEC 2/25/2014

I.S. EN 60317-36:2014Specifications for particular types of winding wires - Part 36: Solderablepolyesterimide enamelled round copper wire, class 180, with a bonding layer CENELEC 2/25/2014

I.S. EN 60317-37:2014 Specifications for particular types of winding wires - Part 37: Polyesterimideenamelled round copper wire, class 180, with a bonding layer

CENELEC 2/25/2014



Reference Title En Origin Body Publication D..I.S. EN 60317-36:2014Specifications for particular types of winding wires - Part 36: Solderablepolyesterimide enamelled round copper wire, class 180, with a bonding layer CENELEC 2/25/2014

I.S. EN 60317-37:2014Specifications for particular types of winding wires - Part 37: Polyesterimideenamelled round copper wire, class 180, with a bonding layer CENELEC 2/25/2014

I.S. EN 60317-38:2014Specifications for particular types of winding wires - Part 38: Polyester orpolyesterimide overcoated with polyamide-imide, enamelled round copper wire,class 200, with a bonding layer

CENELEC 2/25/2014

I.S. EN 60317-46:2014Specifications for particular types of winding wires - Part 46: Aromatic polyimideenamelled round copper wire, class 240 CENELEC 2/25/2014

I.S. EN 60317-47:2014Specifications for particular types of winding wires - Part 47: Aromatic polyimideenamelled rectangular copper wire, class 240 CENELEC 2/25/2014

I.S. EN 60317-51:2014Specifications for particular types of winding wires - Part 51: Solderablepolyurethane enamelled round copper wire, class 180 CENELEC 6/24/2014

I.S. EN 60317-52:2014Specifications for particular types of winding wires - Part 52: Aromaticpolyamide (aramid) tape wrapped round copper wire, temperature index 220 CENELEC 6/9/2014

I.S. EN 60317-53:2014Specifications for particular types of winding wires - Part 53: Aromaticpolyamide (aramid) tape wrapped rectangular copper wire, temperature index220

CENELEC 7/25/2014

I.S. EN 60317-55:2014Specifications for particular types of winding wires - Part 55: Solderablepolyurethane enamelled round copper wire overcoated with polyamide, Class180

CENELEC 2/25/2014

I.S. EN 60335-1:2012/A11:2014Household and similar electrical appliances - Safety - Part 1: Generalrequirements CENELEC 8/27/2014

I.S. EN 60335-1:2012/AC:2013Household and similar electrical appliances - Safety - Part 1: Generalrequirements CENELEC 2/28/2014

I.S. EN 60335-2-56:2003/A2:2014Household and similar electrical appliances - Safety - Part 2-56: Particularrequirements for projectors and similar appliances CENELEC 12/18/2014

I.S. EN 60335-2-101:2002/A2:2014Household and similar electrical appliances - Safety - Part 2-101: Particularrequirements for vaporizers CENELEC 12/10/2014

I.S. EN 60350-1:2013/A11:2014Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens andgrills - Methods for measuring performance CENELEC 12/10/2014

I.S. EN 60350-2:2013/A11:2014Household electric cooking appliances - Part 2: Hobs - Methods for measuringperformance CENELEC 11/27/2014

I.S. EN 60358-3:2014Coupling capacitors and capacitor dividers - Part 3: AC or DC coupling capacitorsfor harmonic-filters applications CENELEC 4/8/2014

I.S. EN 60400:2008/A2:2014 Lampholders for tubular fluorescent lamps and starterholders CENELEC 10/28/2014

I.S. EN 60507:2014Artificial pollution tests on high-voltage ceramic and glass insulators to be usedon a.c. systems CENELEC 4/1/2014

I.S. EN 60598-2-22:2014-2015-10Luminaires - Part 2-22: Particular requirements - Luminaires for emergencylighting CENELEC 10/29/2014

I.S. EN 60601-1-3:2008/A1:2013/AC:2014Medical electrical equipment - Part 1-3: General requirements for basic safetyand essential performance - Collateral Standard: Radiation protection indiagnostic X-ray equipment

CENELEC 6/25/2014

I.S. EN 60601-1-8:2007/A1:2013/AC:2014Medical electrical equipment - Part 1-8: General requirements for basic safetyand essential performance - Collateral Standard: General requirements, testsand guidance for alarm systems in medical electrical equipment and medical el..

CENELEC 6/25/2014

I.S. EN 60601-1:2006/A12:2014-2015-10Medical electrical equipment - Part 1: General requirements for basic safety andessential performance CENELEC 10/21/2014

I.S. EN 60601-1:2006/AC:2014Medical electrical equipment - Part 1: General requirements for basic safety andessential performance CENELEC 6/9/2014

I.S. EN 60601-2-34:2014Medical electrical equipment - Part 2-34: Particular requirements for the basicsafety and essential performance of invasive blood pressure monitoringequipment

CENELEC 7/15/2014

I.S. EN 60661:2014 Methods for measuring the performance of electric household coffee makers CENELEC 6/30/2014

I.S. EN 60684-3-214:2014Flexible insulating sleeving - Part 3: Specifications for individual types ofsleeving - Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded,thick and medium wall

CENELEC 3/4/2014

I.S. EN 60684-3-216:2005/A2:2014Flexible insulating sleeving - Part 3: Specifications for individual types ofsleeving - Sheet 216: Heat-shrinkable, flame-retarded, limited-fire hazardsleeving

CENELEC 6/30/2014

I.S. EN 60684-3-280:2010/A1:2014Flexible insulating sleeving - Part 3: Specifications for individual types ofsleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking CENELEC 4/15/2014

I.S. EN 60684-3-283:2011/A1:2014Flexible insulating sleeving - Part 3: Specifications for individual types ofsleeving - Sheet 283: Heat-shrinkable, polyolefin sleeving, for bus-bar insulationCENELEC 4/15/2014

I.S. EN 60695-1-40:2014Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard ofelectrotechnical products - Insulating liquids CENELEC 5/6/2014

I.S. EN 60695-2-11:2014Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods -Glow-wire flammability test method for end-products (GWEPT) (IEC60695-2-11:2014)

CENELEC 7/30/2014

I.S. EN 60695-2-12:2010/A1:2014Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods -Glow-wire flammability index (GWFI) test method for materials CENELEC 7/3/2014

I.S. EN 60695-2-13:2010/A1:2014Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods -Glow-wire ignition temperature (GWIT) test method for materials CENELEC 6/25/2014

I.S. EN 60695-9-2:2014Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevanceof test methods CENELEC 4/29/2014

I.S. EN 60695-10-2:2014 Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method CENELEC 7/1/2014



Reference Title En Origin Body Publication D..I.S. EN 60695-9-2:2014Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevanceof test methods CENELEC 4/29/2014

I.S. EN 60695-10-2:2014 Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method CENELEC 7/1/2014

I.S. EN 60695-11-2:2014Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame:Apparatus, confirmatory test arrangement and guidance CENELEC 4/1/2014

I.S. EN 60721-2-1:2014Classification of environmental conditions - Part 2-1: Environmental conditionsappearing in nature - Temperature and Humidity CENELEC 7/18/2014

I.S. EN 60721-2-3:2014Classification of environmental conditions - Part 2-3: Environmental conditionsappearing in nature - Air pressure CENELEC 7/18/2014

I.S. EN 60721-2-9:2014Classification of environmental conditions - Part 2-9: Environmental conditionsappearing in nature - Measured shock and vibration data - Storage,transportation and in-use

CENELEC 6/23/2014

I.S. EN 60728-1-1:2014Cable networks for television signals, sound signals and interactive services -Part 1-1: RF cabling for two way home networks CENELEC 9/29/2014

I.S. EN 60728-1-2:2014Cable networks for television signals, sound signals and interactive services -Part 1-2: Performance requirements for signals delivered at the system outlet inoperation

CENELEC 9/17/2014

I.S. EN 60728-1:2014Cable networks for television signals, sound signals and interactive services -Part 1: System performance of forward paths CENELEC 9/29/2014

I.S. EN 60728-10:2014Cable networks for television signals, sound signals and interactive services -Part 10: System performance for return paths CENELEC 6/24/2014

I.S. EN 60728-14:2014Cable networks for television signals, sound signals and interactive services -Part 14: Optical transmission systems using RFoG technology CENELEC 6/25/2014

I.S. EN 60745-2-3:2011/A11:2014Hand-held motor-operated electric tools - Safety - Part 2-3: Particularrequirements for grinders, polishers and disk-type sanders CENELEC 7/1/2014

I.S. EN 60749-26:2014Semiconductor devices - Mechanical and climatic test methods - Part 26:Electrostatic discharge (ESD) sensitivity testing - Human body model (HBM) CENELEC 6/24/2014

I.S. EN 60749-42:2014Semiconductor devices - Mechanical and climatic test methods - Part 42:Temperature and humidity storage CENELEC 10/24/2014

I.S. EN 60754-1:2014Test on gases evolved during combustion of materials from cables - Part 1:Determination of the halogen acid gas content CENELEC 8/1/2014

I.S. EN 60754-2:2014Test on gases evolved during combustion of materials from cables - Part 2:Determination of acidity (by pH measurement) and conductivity CENELEC 6/30/2014

I.S. EN 60770-3:2014Transmitters for use in industrial-process control systems - Part 3: Methods forperformance evaluation of intelligent transmitters CENELEC 9/29/2014

I.S. EN 60793-1-20:2014Optical fibres - Part 1-20: Measurement methods and test procedures - Fibregeometry CENELEC 12/10/2014

I.S. EN 60793-1-51:2014Optical fibres - Part 1-51: Measurement methods and test procedures - Dry heat(steady state) tests CENELEC 6/9/2014

I.S. EN 60793-1-52:2014Optical fibres - Part 1-52: Measurement methods and test procedures - Changeof temperature tests CENELEC 6/9/2014

I.S. EN 60793-1-53:2014Optical fibres - Part 1-53: Measurement methods and test procedures - Waterimmersion tests CENELEC 6/9/2014

I.S. EN 60794-1-2:2014Optical fibre cables - Part 1-2: Generic specification - Cross reference table foroptical cable test procedures CENELEC 2/18/2014

I.S. EN 60794-1-20:2014Optical fibre cables - Part 1-20: Generic specification - Basic optical cable testprocedures - General and definitions CENELEC 4/22/2014

I.S. EN 60794-1-24:2014Optical fibre cables - Part 1-24: Generic specification - Basic optical cable testprocedures - Electrical test methods CENELEC 9/29/2014

I.S. EN 60794-2-20:2014Optical fibre cables - Part 2-20: Indoor cables - Family specification formulti-fibre optical cables CENELEC 6/9/2014

I.S. EN 60794-2-51:2014Optical fibre cables - Part 2-51: Indoor cables - Detail specification for simplexand duplex cables for use in cords for controlled environment CENELEC 8/27/2014

I.S. EN 60794-5-10:2014Optical fibre cables - Part 5â€“10: Family specification - Outdoor microductoptical fibre cables, microducts and protected microducts for installation byblowing

CENELEC 4/29/2014

I.S. EN 60794-5-20:2014Optical fibre cables - Part 5-20: Family specification - Outdoor microduct fibreunits, microducts and protected microducts for installation by blowing CENELEC 6/9/2014

I.S. EN 60819-3-4:2014Non-cellulosic papers for electrical purposes - Part 3: Specifications forindividual materials - Sheet 4: Aramid fibre paper containing not more than 50% of mica particles

CENELEC 4/22/2014

I.S. EN 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements CENELEC 8/27/2014

I.S. EN 60831-1:2014-2015-10Shunt power capacitors of the self-healing type for a.c. systems having a ratedvoltage up to and including 1 000 V - Part 1: General - Performance, testing andrating - Safety requirements - Guide for installation and operation

CENELEC 6/25/2014

I.S. EN 60831-2:2014Shunt power capacitors of the self-healing type for a.c. systems having a ratedvoltage up to and including 1 000 V - Part 2: Ageing test, self-healing test anddestruction test

CENELEC 6/24/2014

I.S. EN 60846-1:2014Radiation protection instrumentation - Ambient and/or directional doseequivalent (rate) meters and/or monitors for beta, X and gamma radiation - Part1: Portable workplace and environmental meters and monitors

CENELEC 9/23/2014

I.S. EN 60870-6-503:2014Telecontrol equipment and systems - Part 6-503: Telecontrol protocolscompatible with ISO standards and ITU-T recommendations - TASE.2 Servicesand protocol

CENELEC 10/24/2014

I.S. EN 60870-6-702:2014 Telecontrol equipment and systems - Part 6-702: Telecontrol protocolscompatible with ISO standards and ITU-T recommendations - Functional profilefor providing the TASE.2 application service in end systems

CENELEC 10/24/2014




Telecontrol equipment and systems - Part 6-503: Telecontrol protocolscompatible with ISO standards and ITU-T recommendations - TASE.2 Servicesand protocol CENELEC 10/24/2014

I.S. EN 60870-6-702:2014Telecontrol equipment and systems - Part 6-702: Telecontrol protocolscompatible with ISO standards and ITU-T recommendations - Functional profilefor providing the TASE.2 application service in end systems

CENELEC 10/24/2014

I.S. EN 60870-6-802:2014Telecontrol equipment and systems - Part 6-802: Telecontrol protocolscompatible with ISO standards and ITU-T recommendations - TASE.2 Objectmodels

CENELEC 10/24/2014

I.S. EN 60871-1:2014Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V -Part 1: General CENELEC 8/27/2014

I.S. EN 60871-4:2014Shunt capacitors for AC power systems having a rated voltage above 1 000 V -Part 4: Internal fuses CENELEC 8/8/2014

I.S. EN 60876-1:2014Fibre optic interconnecting devices and passive components - Fibre optic spatialswitches - Part 1: Generic specification CENELEC 10/29/2014

I.S. EN 60904-8:2014Photovoltaic devices - Part 8: Measurement of spectral responsivity of aphotovoltaic (PV) device CENELEC 9/29/2014

I.S. EN 60947-4-3:2014Low-voltage switchgear and controlgear - Part 4-3: Contactors andmotor-starters - AC semiconductor controllers and contactors for non-motorloads

CENELEC 7/30/2014

I.S. EN 60947-6-1:2005/A1:2014Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment- Transfer switching equipment CENELEC 4/22/2014

I.S. EN 60958-1:2008/A1:2014 Digital audio interface - Part 1: General CENELEC 8/5/2014

I.S. EN 60974-3:2014 Arc welding equipment - Part 3: Arc striking and stabilizing devices CENELEC 2/25/2014

I.S. EN 60974-10:2014Arc welding equipment - Part 10: Electromagnetic compatibility (EMC)requirements CENELEC 9/29/2014

I.S. EN 61000-3-2:2014Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmoniccurrent emissions (equipment input current â‰ ¤ 16 A per phase) CENELEC 9/18/2014

I.S. EN 61000-4-5:2014Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurementtechniques - Surge immunity test CENELEC 9/18/2014

I.S. EN 61000-4-6:2014Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurementtechniques - Immunity to conducted disturbances, induced by radio-frequencyfields

CENELEC 3/4/2014

I.S. EN 61000-4-19:2014Electromagnetic compatibility (EMC) - Part 4-19: Testing and measurementtechniques - Test for immunity to conducted, differential mode disturbances andsignalling in the frequency range 2 kHz to 150 kHz at a.c. power ports

CENELEC 9/18/2014

I.S. EN 61008-1:2012/A1:2014Residual current operated circuit-breakers without integral overcurrentprotection for household and similar uses (RCCBs) - Part 1: General rules CENELEC 10/21/2014

I.S. EN 61008-1:2012/A2:2014Residual current operated circuit-breakers without integral overcurrentprotection for household and similar uses (RCCBs) - Part 1: General rules CENELEC 10/28/2014

I.S. EN 61009-1:2012/A1:2014Residual current operated circuit-breakers with integral overcurrent protectionfor household and similar uses (RCBOs) - Part 1: General rules CENELEC 10/21/2014

I.S. EN 61009-1:2012/A2:2014Residual current operated circuit-breakers with integral overcurrent protectionfor household and similar uses (RCBOs) - Part 1: General rules CENELEC 10/21/2014

I.S. EN 61010-2-010:2014Safety requirements for electrical equipment for measurement, control andlaboratory use - Part 2-010: Particular requirements for laboratory equipmentfor the heating of Materials

CENELEC 11/27/2014

I.S. EN 61034-1:2005/A1:2014Measurement of smoke density of cables burning under defined conditions -Part 1: Test apparatus CENELEC 4/15/2014

I.S. EN 61076-2-104:2014Connectors for electronic equipment - Product requirements - Part 2-104:Circular connectors - Detail specification for circular connectors with M8screw-locking or snap-locking

CENELEC 11/17/2014

I.S. EN 61076-2-109:2014Connectors for electronic equipment - Product requirements - Part 2-109:Circular connectors - Detail specification for connectors with M 12 Ã— 1screw-locking, for data transmission frequencies up to 500 MHz

CENELEC 9/29/2014

I.S. EN 61158-1:2014Industrial communication networks - Fieldbus specifications - Part 1: Overviewand guidance for the IEC 61158 and IEC 61784 series CENELEC 10/14/2014

I.S. EN 61158-2:2014Industrial communication networks - Fieldbus specifications - Part 2: Physicallayer specification and service definition CENELEC 11/6/2014

I.S. EN 61158-3-1:2014Industrial communication networks - Fieldbus specifications - Part 3-1: Data-linklayer service definition - Type 1 elements CENELEC 11/6/2014




I.S. EN 61158-3-12:2014Industrial communication networks - Fieldbus specifications - Part 3-12:Data-link layer service definition - Type 12 elements CENELEC 11/11/2014




I.S. EN 61158-3-20:2014 Industrial communication networks - Fieldbus specifications - Part 3-20:Data-link layer service definition - Type 20 elements

CENELEC 11/14/2014



Reference Title En Origin Body Publication D..I.S. EN 61158-3-19:2014Industrial communication networks - Fieldbus specifications - Part 3-19:Data-link layer service definition - Type 19 elements CENELEC 11/14/2014



I.S. EN 61158-3-24:2014Industrial communication networks - Fieldbus specifications - Part 3-24:Data-link layer service definition - Type-24 elements CENELEC 11/14/2014

I.S. EN 61158-4-1:2014Industrial communication networks - Fieldbus specifications - Part 4-1:Data-link layer protocol specification - Type 1 elements CENELEC 11/17/2014

I.S. EN 61158-4-2:2014Industrial communication networks - Fieldbus specifications -Part 4-2: Data-linklayer protocol specification - Type 2 elements CENELEC 11/27/2014

I.S. EN 61158-4-3:2014Industrial communication networks - Fieldbus specifications - Part 4-3: Data-linklayer protocol specification - Type 3 elements CENELEC 11/27/2014

I.S. EN 61158-4-4:2014Industrial communication networks - Fieldbus specifications - Part 4-4: Data-linklayer protocol specification - Type 4 elements CENELEC 11/27/2014









I.S. EN 61158-5-2:2014Industrial communication networks - Fieldbus specifications - Part 5-2:Application layer service definition - Type 2 elements CENELEC 10/29/2014













I.S. EN 61158-5-24:2014Industrial communication networks - Fieldbus specifications - Part 5-24:Application layer service definition - Type-24 elements CENELEC 11/14/2014

I.S. EN 61158-6-2:2014Energy performance of buildings - Calculation of energy use for space heatingand cooling CEN 11/17/2014

I.S. EN 61158-6-3:2014Industrial communication networks - Fieldbus specifications - Part 6-3:Application layer protocol specification - Type 3 elements CENELEC 11/17/2014



I.S. EN 61158-6-9:2014 Industrial communication networks - Fieldbus specifications - Part 6-9:Application layer protocol specification - Type 9 elements

CENELEC 11/17/2014



Reference Title En Origin Body Publication D..I.S. EN 61158-6-5:2014Industrial communication networks - Fieldbus specifications - Part 6-5:Application layer protocol specification - Type 5 elements CENELEC 11/17/2014










I.S. EN 61158-6-24:2014Industrial communication networks - Fieldbus specifications - Part 6-24:Application layer protocol specification - Type-24 Elements CENELEC 11/27/2014

I.S. EN 61162-3:2008/A2:2014Maritime navigation and radiocommunication equipment and systems - Digitalinterfaces - Part 3: Serial data instrument network CENELEC 10/24/2014

I.S. EN 61169-45:2014Radio-frequency connectors -Part 45: Sectional specification for series SQMAseries quick lock RF coaxial connectors CENELEC 8/27/2014

I.S. EN 61169-49:2014Radio-frequency connectors - Part 49: Sectional specification for SMAA seriesR.F connectors CENELEC 12/10/2014

I.S. EN 61190-1-2:2014Attachment materials for electronic assembly - Part 1-2: Requirements forsoldering pastes for high-quality interconnects in electronics assembly CENELEC 7/2/2014

I.S. EN 61196-10-1:2014Coaxial communication cables - Part 10-1: Blank detail specification forsemi-rigid cables with polytetrafluoroethylene (PTFE) dielectric CENELEC 11/27/2014

I.S. EN 61255:2014 Household electric heating pads - Methods for measuring performance CENELEC 10/14/2014

I.S. EN 61260-1:2014Electroacoustics - Octave-band and fractional-octave-band filters - Part 1:Specifications CENELEC 7/18/2014

I.S. EN 61280-2-12:2014Fibre optic communication subsystem test procedures - Part 2-12: Digitalsystems - Measuring eye diagrams and Q-factor using a software triggeringtechnique for transmission signal quality assessment

CENELEC 7/25/2014

I.S. EN 61280-4-2:2014Fibre-optic communication subsystem test procedures - Part 4-2: Installed cableplant - Single-mode attenuation and optical return loss measurement CENELEC 10/14/2014

I.S. EN 61287-1:2014Railway applications - Power converters installed on board rolling stock - Part 1:Characteristics and test methods CENELEC 9/29/2014

I.S. EN 61290-3-3:2014Optical amplifiers - Test methods - Part 3-3: Noise figure parameters - Signalpower to total ASE power ratio CENELEC 2/18/2014

I.S. EN 61290-10-5:2014Optical amplifiers - Test methods - Part 10-5: Multichannel parameters -Distributed Raman amplifier gain and noise figure CENELEC 8/27/2014

I.S. EN 61300-2-35:2014Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures - Part 2-35: Tests - Cable nutation CENELEC 8/6/2014

I.S. EN 61300-2-42:2014Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures - Part 2-42: Tests - Static side load for strain relief CENELEC 6/9/2014

I.S. EN 61300-2-43:2014Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures - Part 2-43: Tests - Screen testing of return loss ofsingle-mode PC optical fibre connectors

CENELEC 10/14/2014

I.S. EN 61300-3-29:2014Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures - Part 3-29: Examinations and measurements -Spectral transfer characteristics of DWDM devices

CENELEC 7/25/2014

I.S. EN 61300-3-47:2014Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures - Part 3-47: Examinations and measurements - Endface geometry of PC/APC spherically polished ferrules using interferometry

CENELEC 10/14/2014

I.S. EN 61300-3-51:2014Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures - Part 3-51: Examinations and measurements - Pingauge withdrawal force for rectangular ferrule multi-fibre connectors

CENELEC 12/10/2014

I.S. EN 61300-3-52:2014Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures - Part 3-52: Examinations and measurements - Guidehole and alignment pin deformation constant, CD for 8 degree angled PC recta..

CENELEC 6/23/2014

I.S. EN 61331-1:2014Protective devices against diagnostic medical X-radiation - Part 1: Determinationof attenuation properties of materials CENELEC 11/17/2014

I.S. EN 61331-2:2014Protective devices against diagnostic medical X-radiation - Part 2: Translucentprotective plates CENELEC 11/11/2014

I.S. EN 61331-3:2014Protective devices against diagnostic medical X-radiation - Part 3: Protectiveclothing, eyewear and protective patient shields CENELEC 11/17/2014

I.S. EN 61347-2-1:2001+A1-2006/A2:2014Lamp controlgear - Part 2-1: Particular requirements for starting devices (otherthan glow starters) CENELEC 2/25/2014

I.S. EN 61347-2-13:2014 Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. suppliedelectronic controlgear for LED modules

CENELEC 11/6/2014



Reference Title En Origin Body Publication D..I.S. EN 61347-2-1:2001+A1-2006/A2:2014Lamp controlgear - Part 2-1: Particular requirements for starting devices (otherthan glow starters) CENELEC 2/25/2014

I.S. EN 61347-2-13:2014Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. suppliedelectronic controlgear for LED modules CENELEC 11/6/2014

I.S. EN 61375-3-4:2014Electronic railway equipment - Train communication network (TCN) - Part 3-4:Ethernet Consist Network (ECN) CENELEC 7/1/2014

I.S. EN 61400-2:2014 Wind turbines - Part 2: Small wind turbines CENELEC 11/15/2014

I.S. EN 61400-23:2014 Wind turbines - Part 23: Full-scale structural testing of rotor blades CENELEC 6/24/2014

I.S. EN 61534-1:2011/A1:2014 Powertrack systems - Part 1: General requirements CENELEC 9/18/2014

I.S. EN 61534-21:2014Powertrack systems - Part 21: Particular requirements for powertrack systemsintended for wall and ceiling mounting CENELEC 9/12/2014

I.S. EN 61534-22:2014Powertrack systems - Part 22: Particular requirements for powertrack systemsintended for onfloor or underfloor installation CENELEC 9/18/2014

I.S. EN 61557-15:2014Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500V d.c. - Equipment for testing, measuring or monitoring of protective measures- Part 15: Functional safety requirements for insulation monitoring devices in I..

CENELEC 6/9/2014

I.S. EN 61558-2-10:2014Safety of transformers, reactors, power supply units and combinations thereof -Part 2-10: Particular requirements and tests for separating transformers withhigh insulation level and separating transformers with output voltages exceedi..

CENELEC 6/25/2014

I.S. EN 61587-5:2014Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC60297 - Part 5: Seismic tests for chassis, subracks and plug-in units CENELEC 4/8/2014

I.S. EN 61675-1:2014Radionuclide imaging devices - Characteristics and test conditions - Part 1:Positron emission tomographs CENELEC 7/1/2014

I.S. EN 61730-1:2007/A11:2014Photovoltaic (PV) module safety qualification - Part 1: Requirements forconstruction CENELEC 12/10/2014

I.S. EN 61746-1:2011/AC:2014Calibration of optical time-domain reflectometers (OTDR) - Part 1: OTDR forsingle-mode fibres CENELEC 10/7/2014

I.S. EN 61746-2:2011/AC:2014Calibration of optical time-domain reflectometers (OTDR) - Part 2: OTDR formultimode fibres CENELEC 10/7/2014

I.S. EN 61753-1-3:2014Fibre optic interconnecting devices and passive components - Performancestandard - Part 1-3: General and guidance for single-mode fibre optic connectorand cable assembly for industrial environment, Category I

CENELEC 8/27/2014

I.S. EN 61753-031-2:2014Fibre optic interconnecting devices and passive components - Performancestandard - Part 031-2: Non-connectorized single-mode 1Ã—N and 2Ã—Nnon-wavelength-selective branching devices for Category C - Controlled enviro..

CENELEC 11/11/2014

I.S. EN 61753-031-6:2014Fibre optic interconnecting devices and passive components - Performancestandard - Part 031-6: Non-connectorized single-mode 1xN and 2xNnon-wavelength-selective branching devices for Category O - Uncontrolled envi..

CENELEC 11/17/2014

I.S. EN 61753-041-2:2014Fibre optic interconnecting devices and passive components - Performancestandard - Part 041-2: Non-connectorized single-mode OTDR reflecting devicefor category C - Controlled environment

CENELEC 8/27/2014

I.S. EN 61753-042-2:2014Fibre optic interconnecting devices and passive components - Performancestandard - Part 042-2: Plug-pigtail-style and plug-receptacle-style OTDRreflecting devices for category C - Controlled environments

CENELEC 10/24/2014

I.S. EN 61753-053-2:2014Fibre optic interconnecting devices and passive components - Performancestandard - Part 053-2: Non-connectorized single-mode fibre, electricallycontrolled, variable optical attenuator for category C - Controlled environments

CENELEC 8/6/2014

I.S. EN 61753-071-2:2014Fibre optic interconnecting devices and passive components - Performancestandard - Part 071-2: Non-connectorized single-mode fibre optic 1 Ã— 2 and 2Ã— 2 spatial switches for category C - Controlled environments

CENELEC 8/27/2014

I.S. EN 61753-081-2:2014Fibre optic interconnecting devices and passive components - Performancestandard - Part 081-2: Non-connectorized single-mode fibre optic middle-scale 1x N DWDM devices for category C - Controlled environments

CENELEC 9/29/2014

I.S. EN 61754-7-1:2014Fibre optic interconnecting devices and passive components - Fibre opticconnector interfaces - Part 7-1: Type MPO connector family - One fibre row CENELEC 11/17/2014

I.S. EN 61754-30:2014Fibre optic interconnecting devices and passive components - Fibre opticconnector interfaces - Part 30: Type CLIK connector series CENELEC 6/24/2014

I.S. EN 61784-1:2014 Industrial communication networks - Profiles - Part 1: Fieldbus profiles CENELEC 11/17/2014

I.S. EN 61784-2:2014Industrial communication networks - Profiles - Part 2: Additional fieldbus profilesfor real-time networks based on ISO/IEC 8802-3 CENELEC 11/6/2014

I.S. EN 61786-1:2014Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to100 kHz with regard to exposure of human beings - Part 1: Requirements formeasuring instruments

CENELEC 4/8/2014

I.S. EN 61788-19:2014Superconductivity - Part 19: Mechanical properties measurement - Roomtemperature tensile test of reacted Nb3Sn composite superconductors CENELEC 2/18/2014

I.S. EN 61837-2:2011/A1:2014Surface mounted piezoelectric devices for frequency control and selection -Standard outlines and terminal lead connections - Part 2: Ceramic enclosures CENELEC 6/24/2014

I.S. EN 61839:2014Nuclear power plants - Design of control rooms - Functional analysis andassignment CENELEC 9/25/2014

I.S. EN 61850-3:2014Communication networks and systems for power utility automation - Part 3:General requirements CENELEC 8/5/2014

I.S. EN 61851-24:2014-2015-10Electric vehicle conductive charging system - Part 24: Digital communicationbetween a d.c. EV charging station and an electric vehicle for control of d.c.charging

CENELEC 6/24/2014

I.S. EN 61858-1:2014Electrical insulation systems - Thermal evaluation of modifications to anestablished electrical insulation system (EIS) - Part 1: Wire-wound winding EIS CENELEC 6/30/2014

I.S. EN 61858-2:2014 Electrical insulation systems - Thermal evaluation of modifications to anestablished electrical insulation system (EIS) - Part 2: Form-wound EIS

CENELEC 6/9/2014



Reference Title En Origin Body Publication D..I.S. EN 61858-1:2014Electrical insulation systems - Thermal evaluation of modifications to anestablished electrical insulation system (EIS) - Part 1: Wire-wound winding EIS CENELEC 6/30/2014

I.S. EN 61858-2:2014Electrical insulation systems - Thermal evaluation of modifications to anestablished electrical insulation system (EIS) - Part 2: Form-wound EIS CENELEC 6/9/2014

I.S. EN 61869-4:2014Instrument transformers - Part 4: Additional requirements for combinedtransformers CENELEC 6/24/2014

I.S. EN 61883-6:2014Consumer audio/video equipment - Digital interface - Part 6: Audio and musicdata transmission protocol CENELEC 11/17/2014

I.S. EN 61883-8:2009/A1:2014Consumer audio/video equipment - Digital interface - Part 8: Transmission ofITU-R BT.601 style digital video data CENELEC 5/6/2014

I.S. EN 61910-1:2014Medical electrical equipment - Radiation dose documentation - Part 1: Radiationdose structured reports for radiography and radioscopy CENELEC 12/3/2014

I.S. EN 61918:2013/AC:2014Industrial communication networks - Installation of communication networks inindustrial premises CENELEC 6/24/2014

I.S. EN 61936-1:2010/A1:2014 Power installations exceeding 1 kV a.c. - Part 1: Common rules CENELEC 5/6/2014

I.S. EN 61937-6:2006/A1:2014Digital audio - Interface for non-linear PCM encoded audio bitstreams applyingIEC 60958 - Part 6: Non-linear PCM bitstreams according to the MPEG-2 AACand MPEG-4 AAC formats

CENELEC 4/22/2014

I.S. EN 61951-1:2014Secondary cells and batteries containing alkaline or other non-acid electrolytes -Portable sealed rechargeable single cells - Part 1: Nickel-cadmium CENELEC 6/25/2014

I.S. EN 61966-12-2:2014Multimedia systems and equipment - Colour measurement and management -Part 12-2: Simple metadata format for identification of colour gamut CENELEC 6/24/2014

I.S. EN 61968-9:2014Application integration at electric utilities - System interfaces for distributionmanagement - Part 9: Interfaces for meter reading and control CENELEC 4/22/2014

I.S. EN 61970-301:2014Energy management system application program interface (EMS-API) - Part301: Common information model (CIM) base CENELEC 8/5/2014

I.S. EN 61970-453:2014Energy management system application program interface (EMS-API) - Part453: Diagram layout profile CENELEC 7/9/2014

I.S. EN 61970-552:2014Energy Management System Application Program Interface (EMS-API) - Part552: CIMXML Model Exchange Format CENELEC 4/1/2014

I.S. EN 61978-1:2014Fibre optic interconnecting devices and passive components - Fibre opticpassive chromatic dispersion compensators - Part 1: Generic specification CENELEC 9/29/2014

I.S. EN 62019:2000/A12:2014Electrical accessories - Circuit-breakers and similar equipment for household use- Auxiliary contact units CENELEC 11/14/2014

I.S. EN 62021-3:2014Insulating liquids - Determination of acidity - Part 3: Test methods for nonmineral insulating oils CENELEC 12/3/2014

I.S. EN 62047-20:2014 Semiconductor devices - Micro-electromechanical devices - Part 20: Gyroscopes CENELEC 10/24/2014

I.S. EN 62047-21:2014Semiconductor devices - Micro-electromechanical devices - Part 21: Testmethod for Poisson's ratio of thin film MEMS materials CENELEC 10/27/2014

I.S. EN 62047-22:2014Semiconductor devices - Micro-electromechanical devices - Part 22:Electromechanical tensile test method for conductive thin films on flexiblesubstrates

CENELEC 10/24/2014

I.S. EN 62056-3-1:2014Electricity metering data exchange - The DLMS/COSEM suite - Part 3-1: Use oflocal area networks on twisted pair with carrier signalling CENELEC 3/18/2014

I.S. EN 62056-5-3:2014Electricity metering data exchange - The DLMS/COSEM suite - Part 5-3:DLMS/COSEM application layer CENELEC 3/18/2014

I.S. EN 62065:2014Maritime navigation and radiocommunication equipment and systems - Trackcontrol systems - Operational and performance requirements, methods oftesting and required test results

CENELEC 5/16/2014

I.S. EN 62074-1:2014Fibre optic interconnecting devices and passive components - Fibre optic WDMdevices - Part 1: Generic specification CENELEC 4/15/2014

I.S. EN 62116:2014Utility-interconnected photovoltaic inverters - Test procedure of islandingprevention measures CENELEC 8/27/2014

I.S. EN 62146-1:2014Grading capacitors for high-voltage alternating current circuit-breakers - Part 1:General CENELEC 3/26/2014

I.S. EN 62148-15:2014Fibre optic active components and devices - Package and interface standards -Part 15: Discrete vertical cavity surface emitting laser packages CENELEC 8/27/2014

I.S. EN 62148-17:2014Fiber optic active components and devices - Package and interface standards -Part 17: Transmitter and receiver components with dual coaxial RF connectors CENELEC 9/2/2014

I.S. EN 62149-2:2014Fibre optic active components and devices - Performance standards - Part 2:850 nm discrete vertical cavity surface emitting laser devices CENELEC 8/27/2014

I.S. EN 62149-3:2014Fibre optic active components and devices - Performance standards - Part 3:Modulator-integrated laser diode transmitters for 2,5-Gbit/s to 40-Gbit/s fibreoptic transmission systems

CENELEC 8/27/2014

I.S. EN 62149-8:2014Fibre optic active components and devices - Performance standards - Part 8:Seeded reflective semiconductor optical amplifier devices CENELEC 7/18/2014

I.S. EN 62149-9:2014Fibre optic active components and devices - Performance standards - Part 9:Seeded reflective semiconductor optical amplifier transceivers CENELEC 7/31/2014

I.S. EN 62196-1:2012/A12:2014Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductivecharging of electric vehicles - Part 1: General requirements CENELEC 8/19/2014

I.S. EN 62196-2:2012/A12:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductivecharging of electric vehicles - Part 2: Dimensional compatibility andinterchangeability requirements for a.c. pin and contact-tube accessories

CENELEC 8/19/2014



Reference Title En Origin Body Publication D..I.S. EN 62196-1:2012/A12:2014Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductivecharging of electric vehicles - Part 1: General requirements CENELEC 8/19/2014

I.S. EN 62196-2:2012/A12:2014Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductivecharging of electric vehicles - Part 2: Dimensional compatibility andinterchangeability requirements for a.c. pin and contact-tube accessories

CENELEC 8/19/2014

I.S. EN 62196-2:2012/A12:2014/AC:2014Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductivecharging of electric vehicles - Part 2: Dimensional compatibility andinterchangeability requirements for a.c. pin and contact-tube accessories

CENELEC 11/6/2014

I.S. EN 62198:2014 Managing risk in projects - Application guidelines CENELEC 3/11/2014

I.S. EN 62230:2007/A1:2014 Electric cables - Spark-test method CENELEC 7/3/2014

I.S. EN 62271-201:2014High-voltage switchgear and controlgear - Part 201: AC solid-insulation enclosedswitchgear and controlgear for rated voltages above 1 kV and up to andincluding 52 kV

CENELEC 7/31/2014

I.S. EN 62271-202:2014High-voltage switchgear and controlgear - Part 202: High-voltage/low-voltageprefabricated substation CENELEC 6/25/2014

I.S. EN 62271-202:2014/AC:2014-2015-10High-voltage switchgear and controlgear - Part 202: High-voltage/low-voltageprefabricated substation CENELEC 10/28/2014

I.S. EN 62271-211:2014High-voltage switchgear and controlgear - Part 211: Direct connection betweenpower transformers and gas-insulated metal-enclosed switchgear for ratedvoltages above 52 kV

CENELEC 7/1/2014

I.S. EN 62282-4-101:2014Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion otherthan road vehicles and auxiliary power units (APU) - Safety of electricallypowered industrial trucks

CENELEC 11/6/2014

I.S. EN 62287-1:2011/A1:2014Maritime navigation and radiocommunication equipment and systems - Class Bshipborne equipment of the automatic identification system (AIS) - Part 1:Carrier-sense time division multiple access (CSTDMA) techniques

CENELEC 2/24/2014

I.S. EN 62288:2014Maritime navigation and radiocommunication equipment and systems -Presentation of navigation-related information on shipborne navigationaldisplays - General requirements, methods of testing and required test results

CENELEC 10/24/2014

I.S. EN 62290-1:2014Railway applications - Urban guided transport management andcommand/control systems - Part 1: System principles and fundamental conceptsCENELEC 9/29/2014

I.S. EN 62290-2:2014Railway applications - Urban guided transport management andcommand/control systems - Part 2: Functional requirements specification CENELEC 9/29/2014

I.S. EN 62321-2:2014Determination of certain substances in electrotechnical products - Part 2:Disassembly, disjointment and mechanical sample preparation CENELEC 5/6/2014

I.S. EN 62321-3-1:2014Determination of certain substances in electrotechnical products - Part 3-1:Screening - Lead, mercury, cadmium, total chromium and total bromine byX-ray fluorescence spectrometry

CENELEC 5/6/2014

I.S. EN 62321-4:2014Determination of certain substances in electrotechnical products - Part 4:Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES andICP-MS

CENELEC 5/6/2014

I.S. EN 62321-5:2014Determination of certain substances in electrotechnical products - Part 5:Cadmium, lead and chromium in polymers and electronics and cadmium andlead in metals by AAS, AFS, ICP-OES and ICP-MS

CENELEC 5/6/2014

I.S. EN 62325-301:2014Framework for energy market communications - Part 301: Common informationmodel (CIM) extensions for markets CENELEC 8/27/2014

I.S. EN 62325-451-2:2014Framework for energy market communications - Part 451-2: Schedulingbusiness process and contextual model for CIM European market CENELEC 8/27/2014

I.S. EN 62325-451-3:2014Framework for energy market communications - Part 451-3: Transmissioncapacity allocation business process (explicit or implicit auction) and contextualmodels for European market

CENELEC 10/24/2014

I.S. EN 62343-2:2014 Dynamic modules - Part 2: Reliability qualification CENELEC 10/14/2014

I.S. EN 62343-3-3:2014Dynamic modules - Part 3-3: Performance specification templates - Wavelengthselective switches CENELEC 7/25/2014

I.S. EN 62353:2014Medical electrical equipment - Recurrent test and test after repair of medicalelectrical equipment CENELEC 11/26/2014

I.S. EN 62368-1:2014Audio/video, information and communication technology equipment - Part 1:Safety requirements (IEC 62368-1:2014, modified) CENELEC 8/19/2014

I.S. EN 62379-5-1:2014Common control interface for networked digital audio and video products - Part5-1: Transmission over networks - General CENELEC 10/24/2014

I.S. EN 62379-5-2:2014Common control interface for networked digital audio and video products - Part5-2: Transmission over networks - Signalling (TA4) CENELEC 6/30/2014

I.S. EN 62394:2014Service diagnostic interface for consumer electronics products and networks -Implementation for echonet CENELEC 1/28/2014

I.S. EN 62442-2:2014Energy performance of lamp controlgear - Part 2: Controlgear for high intensitydischarge lamps (excluding fluorescent lamps) - Method of measurement todetermine the efficiency of the controlgear

CENELEC 6/24/2014

I.S. EN 62442-3:2014Energy performance of lamp controlgear - Part 3: Controlgear for halogen lampsand LED modules - Method of measurement to determine the efficiency of thecontrolgear

CENELEC 7/30/2014

I.S. EN 62448:2014Multimedia systems and equipment - Multimedia e-publishing and e-books -Generic format for e-publishing CENELEC 6/23/2014

I.S. EN 62477-1:2012/A11:2014Safety requirements for power electronic converter systems and equipment -Part 1: General CENELEC 9/9/2014

I.S. EN 62481-1:2014Digital living network alliance (DLNA) home networked device interoperabilityguidelines - Part 1: Architecture and protocols CENELEC 4/15/2014

I.S. EN 62481-3:2014Digital living network alliance (DLNA) home networked device interoperabilityguidelines - Part 3: Link protection CENELEC 4/1/2014

I.S. EN 62481-4:2014 Digital living network alliance (DLNA) home networked device interoperabilityguidelines - Part 4: DRM interoperability solutions (TA9)

CENELEC 6/9/2014



Reference Title En Origin Body Publication D..I.S. EN 62481-3:2014Digital living network alliance (DLNA) home networked device interoperabilityguidelines - Part 3: Link protection CENELEC 4/1/2014

I.S. EN 62481-4:2014Digital living network alliance (DLNA) home networked device interoperabilityguidelines - Part 4: DRM interoperability solutions (TA9) CENELEC 6/9/2014

I.S. EN 62481-5:2014Digital living network alliance (DLNA) home networked device interoperabilityguidelines - Part 5: DLNA Device Profile guidelines CENELEC 2/18/2014

I.S. EN 62485-3:2014Safety requirements for secondary batteries and battery installations - Part 3:Traction batteries CENELEC 10/29/2014

I.S. EN 62489-2:2014Electroacoustics - Audio-frequency induction loop systems for assisted hearing -Part 2: Methods of calculating and measuring the low-frequency magnetic fieldemissions from the loop for assessing conformity with guidelines on limits for h..

CENELEC 11/11/2014

I.S. EN 62501:2009/A1:2014Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC)power transmission - Electrical testing CENELEC 10/29/2014

I.S. EN 62504:2014General lighting - Light emitting diode (LED) products and related equipment -Terms and definitions CENELEC 10/24/2014

I.S. EN 62522:2014 Calibration of tuneable laser sources CENELEC 8/6/2014

I.S. EN 62555:2014Ultrasonics - Power measurement - High intensity therapeutic ultrasound (HITU)transducers and systems CENELEC 5/6/2014

I.S. EN 62566:2014Nuclear power plants - Instrumentation and control important to safety -Development of HDL-programmed integrated circuits for systems performingcategory A functions

CENELEC 9/29/2014

I.S. EN 62586-1:2014Power quality measurement in power supply systems - Part 1: Power qualityinstruments (PQI) CENELEC 7/18/2014

I.S. EN 62586-2:2014-2015-10Power quality measurement in power supply systems - Part 2: Functional testsand uncertainty requirements CENELEC 7/9/2014

I.S. EN 62607-3-1:2014Nanomanufacturing - Key control characteristics - Part 3-1: Luminescentnanomaterials - Quantum efficiency CENELEC 8/27/2014

I.S. EN 62608-1:2014Multimedia home network configuration - Basic Reference model - Part 1:System model CENELEC 6/30/2014

I.S. EN 62626-1:2014Low-voltage switchgear and controlgear enclosed equipment - Part 1: Enclosedswitch-disconnectors outside the scope of IEC 60947-3 to provide isolationduring repair and maintenance work

CENELEC 7/1/2014

I.S. EN 62670-1:2014Photovoltaic concentrators (CPV) - Performance testing - Part 1: Standardconditions CENELEC 6/23/2014

I.S. EN 62675:2014Secondary cells and batteries containing alkaline or other non-acid electrolytes -Sealed nickel-metal hydride prismatic rechargeable single cells CENELEC 11/27/2014

I.S. EN 62676-1-1:2014/AC:2014Video surveillance systems for use in security applications - Part 1-1: Systemrequirements - General CENELEC 7/22/2014

I.S. EN 62676-1-2:2014Video surveillance systems for use in security applications - Part 1-2: Systemrequirements â€“ Performance requirements for video transmission CENELEC 3/26/2014

I.S. EN 62676-2-1:2014Video surveillance systems for use in security applications - Part 2-1: Videotransmission protocols - General requirements CENELEC 1/28/2014

I.S. EN 62676-2-2:2014Video surveillance systems for use in security applications - Part 2-2: Videotransmission protocols - IP interoperability implementation based on HTTP andREST services

CENELEC 1/28/2014

I.S. EN 62676-2-3:2014Video surveillance systems for use in security applications - Part 2-3: Videotransmission protocols - IP interoperability implementation based on Webservices

CENELEC 1/28/2014

I.S. EN 62680-4:2014Universal serial bus interfaces for data and power - Part 4: Universal Serial BusCables and Connectors Class Document, Revision 2.0 CENELEC 4/22/2014

I.S. EN 62707-1:2014 LED-binning - Part 1: General requirements and white colour grid CENELEC 3/26/2014

I.S. EN 62714-1:2014Engineering data exchange format for use in industrial automation systemsengineering - Automation markup language - Part 1: Architecture and generalrequirements

CENELEC 11/6/2014

I.S. EN 62747:2014-2015-10Terminology for voltage-sourced converters (VSC) for high-voltage directcurrent (HVDC) systems CENELEC 10/14/2014

I.S. EN 62751-1:2014Power losses in voltage sourced converter (VSC) valves for high-voltage directcurrent (HVDC) systems - Part 1: General requirements CENELEC 11/26/2014

I.S. EN 62751-2:2014Power losses in voltage sourced converter (VSC) valves for high-voltage directcurrent (HVDC) systems - Part 2: Modular multilevel converters CENELEC 11/26/2014

I.S. EN 62761:2014Guidelines for the measurement method of nonlinearity for surface acousticwave (SAW) and bulk acoustic wave (BAW) devices in radio frequency (RF) CENELEC 7/1/2014

I.S. EN 62770:2014Fluids for electrotechnical applications - Unused natural esters for transformersand similar electrical equipment CENELEC 4/29/2014

I.S. EN 62798:2014-2015-10 Industrial electroheating equipment - Test methods for infrared emitters CENELEC 10/24/2014

I.S. EN 62826:2014Surface cleaning appliances - Floor treatment machines with or without tractiondrive, for commercial use - Methods of measuring the performance CENELEC 10/28/2014

I.S. EN 62841-2-2:2014Electric motor-operated hand-held tools, transportable tools and lawn andgarden machinery - Safety - Part 2-2: Particular requirements for hand-heldscrewdrivers and impact wrenches (IEC 62841-2-2:2014, modified)

CENELEC 9/9/2014

I.S. EN 62841-2-4:2014Electric motor-operated hand-held tools, transportable tools and lawn andgarden machinery - Safety - Part 2-4: Particular requirements for hand-heldsanders and polishers other than disc type (IEC 62841-2-4:2014, modified)

CENELEC 9/9/2014

I.S. EN 62841-2-5:2014 Electric motor-operated hand-held tools, transportable tools and lawn andgarden machinery - Safety - Part 2-5: Particular requirements for hand-heldcircular saws (IEC 62841-2-5:2014, modified)

CENELEC 9/9/2014




Electric motor-operated hand-held tools, transportable tools and lawn andgarden machinery - Safety - Part 2-4: Particular requirements for hand-heldsanders and polishers other than disc type (IEC 62841-2-4:2014, modified) CENELEC 9/9/2014

I.S. EN 62841-2-5:2014Electric motor-operated hand-held tools, transportable tools and lawn andgarden machinery - Safety - Part 2-5: Particular requirements for hand-heldcircular saws (IEC 62841-2-5:2014, modified)

CENELEC 9/9/2014

I.S. EN 62841-3-1:2014Electric motor-operated hand-held tools, transportable tools and lawn andgarden machinery - Safety - Part 3-1: Particular requirements for transportabletable saws (IEC 62841-3-1:2014, modified)

CENELEC 9/9/2014

I.S. EN 62841-3-6:2014-2015-10Electric motor-operated hand-held tools, transportable tools and lawn andgarden machinery - Safety - Part 3-6: Particular requirements for transportablediamond drills with liquid system (IEC 62841-3-6:2014, modified)

CENELEC 9/9/2014

I.S. EN 62929:2014Cleaning robots for household use - Dry cleaning: Methods of measuringperformance CENELEC 10/2/2014

I.S. EN 419211-1:2014 Protection profiles for secure signature creation device - Part 1: Overview CEN 10/25/2014

I.S. EN 419211-6:2014Protection profiles for secure signature creation device - Part 6: Extension fordevice with key import and trusted channel to signature creation application CEN 10/25/2014

I.S. EN ISO 105-B01:2014Textiles - Tests for colour fastness - Part B01: Colour fastness to light: Daylight(ISO 105-B01:2014) CEN 9/20/2014

I.S. EN ISO 105-B02:2014Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light:Xenon arc fading lamp test (ISO 105-B02:2014) CEN 10/3/2014

I.S. EN ISO 535:2014Paper and board - Determination of water absorptiveness - Cobb method (ISO535:2014) CEN 2/15/2014

I.S. EN ISO 683-17:2014Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and rollerbearing steels (ISO 683-17:2014) CEN 11/26/2014

I.S. EN ISO 844:2014 Rigid cellular plastics - Determination of compression properties (ISO 844:2014)CEN 8/23/2014

I.S. EN ISO 1891-2:2014Fasteners - Terminology - Part 2: Vocabulary and definitions for coatings (ISO1891-2:2014) CEN 11/11/2014

I.S. EN ISO 2440:1999/A2:2014Flexible and rigid cellular polymeric materials - Accelerated ageing tests -Amendment 2 (ISO 2440:1997/AMD 2:2014) CEN 11/11/2014

I.S. EN ISO 2538-1:2014Geometrical product specifications (GPS) - Wedges - Part 1: Series of anglesand slopes (ISO 2538-1:2014) CEN 9/20/2014

I.S. EN ISO 2538-2:2014Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning andtolerancing (ISO 2538-2:2014) CEN 9/20/2014

I.S. EN ISO 2588:2014 Leather - Sampling - Number of items for a gross sample (ISO 2588:2014) CEN 8/6/2014

I.S. EN ISO 2758:2014 Paper - Determination of bursting strength (ISO 2758:2014) CEN 9/6/2014

I.S. EN ISO 2759:2014 Board - Determination of bursting strength (ISO 2759:2014) CEN 7/19/2014

I.S. EN ISO 2813:2014Paints and varnishes - Determination of gloss value at 20Â°, 60Â° and 85Â°(ISO 2813:2014) CEN 11/1/2014

I.S. EN ISO 2919:2014Radiological protection - Sealed radioactive sources - General requirements andclassification (ISO 2919:2012) CEN 11/26/2014

I.S. EN ISO 3166-1:2014Codes for the representation of names of countries and their subdivisions - Part1: Country codes (ISO 3166-1:2013) CEN 8/2/2014

I.S. EN ISO 3167:2014 Plastics - Multipurpose test specimens (ISO 3167:2014) CEN 8/23/2014

I.S. EN ISO 3218:2014 Essential oils - Principles of nomenclature (ISO 3218:2014) CEN 8/23/2014

I.S. EN ISO 3233-2:2014Paints and varnishes - Determination of the percentage volume of non-volatilematter - Part 2: Method using the determination of non-volatile-matter contentin accordance with ISO 3251 and determination of dry film density on coated t..

CEN 7/19/2014

I.S. EN ISO 3385:2014Flexible cellular polymeric materials - Determination of fatigue by constant-loadpounding (ISO 3385:2014) CEN 8/2/2014

I.S. EN ISO 3452-1:2013Non-destructive testing - Penetrant testing - Part 1: General principles (ISO3452-1:2013, Corrected version 2014-05-01) CEN 6/12/2014

I.S. EN ISO 3493:2014 Vanilla - Vocabulary (ISO 3493:2014) CEN 7/29/2014

I.S. EN ISO 3691-5:2014/AC:2014Industrial trucks - Safety requirements and verification - Part 5:Pedestrian-propelled trucks (ISO 3691-5:2014) CEN 9/13/2014

I.S. EN ISO 3691-6:2013/AC:2014Industrial trucks - Safety requirements and verification - Part 6: Burden andpersonnel carriers (ISO 3691-6:2013) CEN 3/22/2014

I.S. EN ISO 3949:2014Plastics hoses and hose assemblies - Textile-reinforced types for hydraulicapplications - Specification (ISO 3949:2009) CEN 8/16/2014

I.S. EN ISO 3994:2014Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suctionand discharge of aqueous materials - Specification (ISO 3994:2014) CEN 9/6/2014

I.S. EN ISO 4017:2014 Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014) CEN 7/30/2014

I.S. EN ISO 4064-3:2014Water meters for cold potable water and hot water - Part 3: Test report format(ISO 4064-3:2014) CEN 7/1/2014

I.S. EN ISO 4064-4:2014 Water meters for cold potable water and hot water - Part 4: Non-metrologicalrequirements not covered in ISO 4064-1 (ISO 4064-4:2014)

CEN 6/21/2014



Reference Title En Origin Body Publication D..I.S. EN ISO 4064-3:2014Water meters for cold potable water and hot water - Part 3: Test report format(ISO 4064-3:2014) CEN 7/1/2014

I.S. EN ISO 4064-4:2014Water meters for cold potable water and hot water - Part 4: Non-metrologicalrequirements not covered in ISO 4064-1 (ISO 4064-4:2014) CEN 6/21/2014

I.S. EN ISO 4126-6:2014Safety devices for protection against excessive pressure - Part 6: Application,selection and installation of bursting disc safety devices (ISO 4126-6:2014) CEN 7/5/2014

I.S. EN ISO 4210-1:2014Cycles - Safety requirements for bicycles - Part 1: Terms and definitions (ISO4210-1:2014) CEN 7/19/2014

I.S. EN ISO 4210-3:2014Cycles - Safety requirements for bicycles - Part 3: Common test methods (ISO4210-3:2014) CEN 7/19/2014

I.S. EN ISO 4210-4:2014Cycles - Safety requirements for bicycles - Part 4: Braking test methods (ISO4210-4:2014) CEN 7/19/2014

I.S. EN ISO 4210-5:2014Cycles - Safety requirements for bicycles - Part 5: Steering test methods (ISO4210-5:2014, Corrected version 2015-02-01) CEN 7/19/2014

I.S. EN ISO 4210-7:2014Cycles - Safety requirements for bicycles - Part 7: Wheels and rims test methods(ISO 4210-7:2014) CEN 7/19/2014

I.S. EN ISO 4210-8:2014Cycles - Safety requirements for bicycles - Part 8: Pedal and drive system testmethods (ISO 4210-8:2014) CEN 7/19/2014

I.S. EN ISO 4210-9:2014Cycles - Safety requirements for bicycles - Part 9: Saddles and seat-post testmethods (ISO 4210-9:2014) CEN 7/19/2014

I.S. EN ISO 4375:2014 Hydrometry - Cableway systems for stream gauging (ISO 4375:2014) CEN 12/13/2014

I.S. EN ISO 4490:2014Metallic powders - Determination of flow rate by means of a calibrated funnel(Hall flowmeter) (ISO 4490:2014) CEN 9/6/2014

I.S. EN ISO 4618:2014 Paints and varnishes - Terms and definitions (ISO 4618:2014) CEN 11/7/2014

I.S. EN ISO 4833-2:2013/AC:2014Microbiology of the food chain - Horizontal method for the enumeration ofmicroorganisms - Part 2: Colony count at 30 degrees C by the surface platingtechnique - Technical Corrigendum 1 (ISO 4833-2:2013/Cor 1:2014)

CEN 8/13/2014

I.S. EN ISO 4895:2014Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO4895:2014) CEN 8/2/2014

I.S. EN ISO 5163:2014Petroleum products - Determination of knock characteristics of motor andaviation fuels - Motor method (ISO 5163:2014) CEN 6/21/2014

I.S. EN ISO 5164:2014Petroleum products - Determination of knock characteristics of motor fuels -Research method (ISO 5164:2014) CEN 6/21/2014

I.S. EN ISO 5359:2014Anaesthetic and respiratory equipment - Low-pressure hose assemblies for usewith medical gases (ISO 5359:2014) CEN 11/1/2014

I.S. EN ISO 5367:2014Anaesthetic and respiratory equipment - Breathing sets and connectors (ISO5367:2014) CEN 11/8/2014

I.S. EN ISO 5555:2001/A1:2014Animal and vegetable fats and oils - Sampling - Amendment 1: Flexitanks (ISO5555:2001/Amd 1:2014) CEN 8/6/2014

I.S. EN ISO 5817:2014Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beamwelding excluded) - Quality levels for imperfections (ISO 5817:2014) CEN 3/1/2014

I.S. EN ISO 6103:2014Bonded abrasive products - Permissible unbalances of grinding wheels asdelivered - Static testing (ISO 6103:2014) CEN 11/1/2014

I.S. EN ISO 6185-3:2014Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motorrating of 15 kW and greater (ISO 6185-3:2014) CEN 9/6/2014

I.S. EN ISO 6427:2014Plastics - Determination of matter extractable by organic solvents (conventionalmethods) (ISO 6427:2013) CEN 6/21/2014

I.S. EN ISO 6506-1:2014Metallic materials - Brinell hardness test - Part 1: Test method (ISO6506-1:2014) CEN 10/11/2014

I.S. EN ISO 6506-2:2014Metallic materials - Brinell hardness test - Part 2: Verification and calibration oftesting machines (ISO 6506-2:2014) CEN 10/11/2014

I.S. EN ISO 6506-3:2014Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks(ISO 6506-3:2014) CEN 10/11/2014

I.S. EN ISO 6506-4:2014Metallic materials - Brinell hardness test - Part 4: Table of hardness values (ISO6506-4:2014) CEN 10/11/2014

I.S. EN ISO 6509-1:2014Corrosion of metals and alloys - Determination of dezincification resistance ofcopper alloys with zinc - Part 1: Test method (ISO 6509-1:2014) CEN 6/21/2014

I.S. EN ISO 6808:2014Plastics hoses and hose assemblies for suction and low-pressure discharge ofpetroleum liquids - Specification (ISO 6808:2014) CEN 7/19/2014

I.S. EN ISO 6938:2014 Textiles - Natural fibres - Generic names and definitions (ISO 6938:2012) CEN 11/26/2014

I.S. EN ISO 6974-5:2014Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CEN 8/2/2014

I.S. EN ISO 7010:2012/A1:2014Graphical symbols - Safety colours and safety signs - Registered safety signs(ISO 7010:2011/Amd 1:2012) CEN 2/10/2014


I.S. EN ISO 7010:2012/A3:2014 Graphical symbols - Safety colours and safety signs - Registered safety signs(ISO 7010:2011/Amd 3:2012)

CEN 2/10/2014



Reference Title En Origin Body Publication D..I.S. EN ISO 7010:2012/A2:2014Graphical symbols - Safety colours and safety signs - Registered safety signs(ISO 7010:2011/Amd 2:2012) CEN 2/10/2014



I.S. EN ISO 7866:2012/AC:2014Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design,construction and testing - Technical Corrigendum 1 (ISO 7866:2012/Cor1:2014)

CEN 5/3/2014

I.S. EN ISO 8029:2014Plastics hose - General-purpose collapsible water hose, textile-reinforced -Specification (ISO 8029:2014) CEN 9/6/2014

I.S. EN ISO 8030:2014 Rubber and plastics hoses - Method of test for flammability (ISO 8030:2014) CEN 8/2/2014

I.S. EN ISO 8098:2014 Cycles - Safety requirements for bicycles for young children (ISO 8098:2014) CEN 7/5/2014

I.S. EN ISO 8330:2014 Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2014) CEN 9/6/2014

I.S. EN ISO 8407:2014Corrosion of metals and alloys - Removal of corrosion products from corrosiontest specimens (ISO 8407:2009) CEN 3/22/2014

I.S. EN ISO 8586:2014Sensory analysis - General guidelines for the selection, training and monitoringof selected assessors and expert sensory assessors (ISO 8586:2012, Correctedversion 2014-06-15)

CEN 1/25/2014

I.S. EN ISO 8589:2010/A1:2014Sensory analysis - General guidance for the design of test rooms (ISO8589:2007/Amd 1:2014) CEN 7/30/2014

I.S. EN ISO 8598-1:2014Optics and optical instruments - Focimeters - Part 1: General purposeinstruments (ISO 8598-1:2014) CEN 10/11/2014

I.S. EN ISO 8637:2014Cardiovascular implants and extracorporeal systems - Haemodialysers,haemodiafilters, haemofilters and haemoconcentrators (ISO 8637:2010,including Amendment 1 2013-04-01)

CEN 1/25/2014

I.S. EN ISO 8638:2014Cardiovascular implants and extracorporeal systems - Extracorporeal bloodcircuit for haemodialysers, haemodiafilters and haemofilters (ISO 8638:2010) CEN 1/25/2014

I.S. EN ISO 8836:2014 Suction catheters for use in the respiratory tract (ISO 8836:2014) CEN 11/26/2014

I.S. EN ISO 8871-2:2004/A1:2014Elastomeric parts for parenterals and for devices for pharmaceutical use - Part2: Identification and characterization - Amendment 1 (ISO 8871-2:2003/Amd1:2005)

CEN 7/14/2014

I.S. EN ISO 8968-1:2014Milk and milk products - Determination of nitrogen content - Part 1: Kjeldahlprinciple and crude protein calculation (ISO 8968-1:2014) CEN 2/15/2014

I.S. EN ISO 9173-3:2014 Dentistry - Extraction forceps - Part 3: Design (ISO 9173-3:2014) CEN 5/17/2014

I.S. EN ISO 9308-1:2014Water quality - Enumeration of Escherichia coli and coliform bacteria - Part 1:Membrane filtration method for waters with low bacterial background flora (ISO9308-1:2014)

CEN 10/11/2014

I.S. EN ISO 9308-2:2014Water quality - Enumeration of Escherichia coli and coliform bacteria - Part 2:Most probable number method (ISO 9308-2:2012) CEN 4/29/2014

I.S. EN ISO 9453:2014 Soft solder alloys - Chemical compositions and forms (ISO 9453:2014) CEN 9/2/2014

I.S. EN ISO 9455-5:2014Soft soldering fluxes - Test methods - Part 5: Copper mirror test (ISO9455-5:2014) CEN 7/19/2014

I.S. EN ISO 9680:2014 Dentistry - Operating lights (ISO 9680:2014) CEN 11/26/2014

I.S. EN ISO 9902-1:2001/A2:2014Textile machinery - Noise test code - Part 1: Common requirements -Amendment 2 (ISO 9902-1:2001/Amd 2:2014) CEN 7/19/2014

I.S. EN ISO 9902-2:2001/A2:2014Textile machinery - Noise test code - Part 2: Spinning preparatory and spinningmachinery - Amendment 2 (ISO 9902-2:2001/Amd 2:2014) CEN 7/5/2014

I.S. EN ISO 9902-3:2001/A2:2014Textile machinery - Noise test code - Part 3: Nonwoven machinery -Amendment 2 (ISO 9902-3:2001/Amd 2:2014) CEN 7/5/2014

I.S. EN ISO 9902-4:2001/A2:2014Textile machinery - Noise test code - Part 4: Yarn processing, cordage and ropemanufacturing machinery - Amendment 2 (ISO 9902-4:2001/Amd 2:2014) CEN 7/5/2014

I.S. EN ISO 9902-5:2001/A2:2014Textile machinery - Noise test code - Part 5: Weaving and knitting preparatorymachinery (ISO 9902-5:2001/Amd 2:2014) CEN 7/5/2014

I.S. EN ISO 9902-6:2001/A2:2014Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery(ISO 9902-6:2001/Amd 2:2014) CEN 7/5/2014

I.S. EN ISO 9902-7:2001/A2:2014Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery(ISO 9902-7:2001/Amd 2:2014) CEN 7/5/2014

I.S. EN ISO 10079-2:2014Medical suction equipment - Part 2: Manually powered suction equipment (ISO10079-2:2014) CEN 5/17/2014

I.S. EN ISO 10079-3:2014Medical suction equipment - Part 3: Suction equipment powered from a vacuumor positive pressure gas source (ISO 10079-3:2014) CEN 7/30/2014

I.S. EN ISO 10081-4:2014Classification of dense shaped refractory products - Part 4: Special products(ISO 10081-4:2014) CEN 9/25/2014

I.S. EN ISO 10113:2014Metallic materials - Sheet and strip - Determination of plastic strain ratio (ISO10113:2006, Corrected version 2007-08-01) CEN 6/28/2014

I.S. EN ISO 10121-1:2014 Test method for assessing the performance of gas-phase air cleaning media anddevices for general ventilation - Part 1: Gas-phase air cleaning media (ISO10121-1:2014)

CEN 4/29/2014



Reference Title En Origin Body Publication D..I.S. EN ISO 10113:2014Metallic materials - Sheet and strip - Determination of plastic strain ratio (ISO10113:2006, Corrected version 2007-08-01) CEN 6/28/2014

I.S. EN ISO 10121-1:2014Test method for assessing the performance of gas-phase air cleaning media anddevices for general ventilation - Part 1: Gas-phase air cleaning media (ISO10121-1:2014)

CEN 4/29/2014

I.S. EN ISO 10140-5:2010/A1:2014Acoustics - Laboratory measurement of sound insulation of building elements -Part 5: Requirements for test facilities and equipment - Amendment 1: Rainfallsound (ISO 10140-5:2010/Amd 1:2014)

CEN 5/17/2014

I.S. EN ISO 10275:2014Metallic materials - Sheet and strip - Determination of tensile strain hardeningexponent (ISO 10275:2007) CEN 6/28/2014

I.S. EN ISO 10297:2014Gas cylinders - Cylinder valves - Specification and type testing (ISO 10297:2014,Corrected version 2014-11-01) CEN 8/2/2014

I.S. EN ISO 10306:2014Textiles - Cotton fibres - Evaluation of maturity by the air flow method (ISO10306:2014) CEN 6/21/2014

I.S. EN ISO 10343:2014 Ophthalmic instruments - Ophthalmometers (ISO 10343:2014) CEN 7/19/2014

I.S. EN ISO 10370:2014Petroleum products - Determination of carbon residue - Micro method (ISO10370:2014) CEN 12/1/2014

I.S. EN ISO 10545-1:2014 Ceramic tiles - Part 1: Sampling and basis for acceptance (ISO 10545-1:2014) CEN 11/1/2014

I.S. EN ISO 10545-4:2014Ceramic tiles - Part 4: Determination of modulus of rupture and breakingstrength (ISO 10545-4:2014) CEN 8/2/2014

I.S. EN ISO 10545-8:2014Ceramic tiles - Part 8: Determination of linear thermal expansion (ISO10545-8:2014) CEN 6/21/2014

I.S. EN ISO 10664:2014 Hexalobular internal driving feature for bolts and screws (ISO 10664:2014) CEN 11/1/2014

I.S. EN ISO 10683:2014 Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2014) CEN 6/30/2014

I.S. EN ISO 10693:2014Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CEN 6/9/2014

I.S. EN ISO 10993-3:2014Biological evaluation of medical devices - Part 3: Tests for genotoxicity,carcinogenicity and reproductive toxicity (ISO 10993-3:2014) CEN 11/1/2014

I.S. EN ISO 11070:2014Sterile single-use intravascular introducers, dilators and guidewires (ISO11070:2014) CEN 12/1/2014

I.S. EN ISO 11073-10102:2014Health informatics - Point-of-care medical device communication - Part 10102:Nomenclature - Annotated ECG (ISO/IEEE 11073-10102:2014) CEN 3/15/2014

I.S. EN ISO 11073-10418:2014Health informatics - Personal health device communication - Part 10418: Devicespecialization - International Normalized Ratio (INR) monitor (ISO/IEEE11073-10418:2014, Corrected version 2014-05-01)

CEN 3/15/2014

I.S. EN ISO 11092:2014Textiles - Physiological effects - Measurement of thermal and water-vapourresistance under steady-state conditions (sweating guarded-hotplate test) (ISO11092:2014)

CEN 9/20/2014

I.S. EN ISO 11133:2014Microbiology of food, animal feed and water - Preparation, production, storageand performance testing of culture media (ISO 11133:2014) CEN 6/7/2014

I.S. EN ISO 11135:2014Sterilization of health-care products - Ethylene oxide - Requirements for thedevelopment, validation and routine control of a sterilization process for medicaldevices (ISO 11135:2014)

CEN 8/2/2014

I.S. EN ISO 11140-1:2014Sterilization of health care products - Chemical indicators - Part 1: Generalrequirements (ISO 11140-1:2014) CEN 12/1/2014

I.S. EN ISO 11200:2014Acoustics - Noise emitted by machinery and equipment - Guidelines for the useof basic standards for the determination of emission sound pressure levels at awork station and at other specified positions (ISO 11200:2014)

CEN 6/30/2014





I.S. EN ISO 11357-2:2014Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glasstransition temperature and glass transition step height (ISO 11357-2:2013) CEN 4/5/2014

I.S. EN ISO 11357-4:2014Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination ofspecific heat capacity (ISO 11357-4:2014) CEN 7/12/2014

I.S. EN ISO 11357-5:2014Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination ofcharacteristic reaction-curve temperatures and times, enthalpy of reaction anddegree of conversion (ISO 11357-5:2013)

CEN 4/5/2014

I.S. EN ISO 11358-1:2014Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO11358-1:2014) CEN 8/2/2014

I.S. EN ISO 11403-1:2014Plastics - Acquisition and presentation of comparable multipoint data - Part 1:Mechanical properties (ISO 11403-1:2014) CEN 7/5/2014

I.S. EN ISO 11403-3:2014Plastics - Acquisition and presentation of comparable multipoint data - Part 3:Environmental influences on properties (ISO 11403-3:2014) CEN 7/5/2014


I.S. EN ISO 11474:2014 Corrosion of metals and alloys - Corrosion tests in artificial atmosphere -Accelerated outdoor test by intermittent spraying of a salt solution (Scab test)(ISO 11474:1998)

CEN 3/22/2014



Reference Title En Origin Body Publication D..I.S. EN ISO 11461:2014Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CEN 4/5/2014

I.S. EN ISO 11474:2014Corrosion of metals and alloys - Corrosion tests in artificial atmosphere -Accelerated outdoor test by intermittent spraying of a salt solution (Scab test)(ISO 11474:1998)

CEN 3/22/2014

I.S. EN ISO 11499:2014 Dentistry - Single-use cartridges for local anaesthetics (ISO 11499:2014) CEN 6/21/2014

I.S. EN ISO 11646:2014 Leather - Measurement of area (ISO 11646:2014) CEN 3/15/2014

I.S. EN ISO 11960:2014Petroleum and natural gas industries - Steel pipes for use as casing or tubingfor wells (ISO 11960:2014) CEN 2/1/2014

I.S. EN ISO 11979-2:2014Ophthalmic implants - Intraocular lenses - Part 2: Optical properties and testmethods (ISO 11979-2:2014) CEN 9/6/2014

I.S. EN ISO 11979-6:2014Ophthalmic implants - Intraocular lenses - Part 6: Shelf-life and transportstability testing (ISO 11979-6:2014) CEN 11/1/2014

I.S. EN ISO 11979-7:2014Ophthalmic implants - Intraocular lenses - Part 7: Clinical investigations (ISO11979-7:2014) CEN 9/20/2014

I.S. EN ISO 11979-9:2006/A1:2014Ophthalmic implants - Intraocular lenses - Part 9: Multifocal intraocular lenses(ISO 11979-9:2006/Amd 1:2014) CEN 9/6/2014

I.S. EN ISO 11979-10:2006/A1:2014Ophthalmic implants - Intraocular lenses - Part 10: Phakic intraocular lenses(ISO 11979-10:2006/Amd 1:2014) CEN 8/23/2014

I.S. EN ISO 11990-1:2014Lasers and laser-related equipment - Determination of laser resistance oftracheal tubes - Part 1: Tracheal tube shaft (ISO 11990-1:2011) CEN 11/26/2014

I.S. EN ISO 11990-2:2014Lasers and laser-related equipment - Determination of laser resistance oftracheal tubes - Part 2: Tracheal tube cuffs (ISO 11990-2:2010) CEN 11/26/2014

I.S. EN ISO 12010:2014Water quality - Determination of short-chain polychlorinated alkanes (SCCPs) inwater - Method using gas chromatography-mass spectrometry (GC-MS) andnegative-ion chemical ionization (NCI) (ISO 12010:2012)

CEN 4/29/2014

I.S. EN ISO 12215-5:2008/A1:2014Small craft - Hull construction and scantlings - Part 5: Design pressures formonohulls, design stresses, scantlings determination - Amendment 1 (ISO12215-5:2008/Amd 1:2014)

CEN 7/19/2014

I.S. EN ISO 12228-1:2014Determination of individual and total sterols contents - Gas chromatographicmethod - Part 1: Animal and..

CEN 8/6/2014

I.S. EN ISO 12228-2:2014Determination of individual and total sterols contents - Gas chromatographicmethod - Part 2: Olive and olive pomace oils (ISO 12228-2:2014) CEN 12/11/2014


I.S. EN ISO 12625-3:2014Tissue paper and tissue products - Part 3: Determination of thickness, bulkingthickness and apparent bulk density and bulk (ISO 12625-3:2014) CEN 4/12/2014

I.S. EN ISO 12625-7:2014Tissue paper and tissue products - Part 7: Determination of optical properties -Measurement of brightness and colour with D65/10Â° (outdoor daylight) (ISO12625-7:2014)

CEN 5/17/2014

I.S. EN ISO 12671:2014Thermal spraying - Thermally sprayed coatings - Symbolic representation ondrawings (ISO 12671:2012) CEN 3/29/2014

I.S. EN ISO 12870:2014Ophthalmic optics - Spectacle frames - Requirements and test methods (ISO12870:2012) CEN 11/1/2014

I.S. EN ISO 12872:2014Olive oils and olive-pomace oils - Determination of the 2-glyceryl monopalmitatecontent (ISO 12872:2010) CEN 4/29/2014

I.S. EN ISO 12873:2014Olive oils and olive-pomace oils - Determination of wax content by capillary gaschromatography (ISO 12873:2010) CEN 4/29/2014

I.S. EN ISO 12945-3:2014Textiles - Determination of the fabric propensity to surface pilling, fuzzing ormatting - Part 3: Random tumble pilling method (ISO 12945-3:2014) CEN 7/19/2014

I.S. EN ISO 12966-1:2014Animal and vegetable fats and oils - Gas chromatography of fatty acid methylesters - Part 1: Guidelines on modern gas chromatography of fatty acid methylesters (ISO 12966-1:2014)

CEN 12/20/2014

I.S. EN ISO 12999-1:2014Acoustics - Determination and application of measurement uncertainties inbuilding acoustics - Part 1: Sound insulation (ISO 12999-1:2014) CEN 6/7/2014

I.S. EN ISO 13085:2014Petroleum and natural gas industries - Aluminium alloy pipe for use as tubingfor wells (ISO 13085:2014) CEN 3/29/2014

I.S. EN ISO 13116:2014Dentistry - Test Method for Determining Radio-Opacity of Materials (ISO13116:2014) CEN 12/1/2014

I.S. EN ISO 13212:2014Ophthalmic optics - Contact lens care products - Guidelines for determination ofshelf-life (ISO 13212:2014) CEN 9/25/2014

I.S. EN ISO 13274:2013/AC:2014Packaging - Transport packaging for dangerous goods - Plastics compatibilitytesting for packaging and IBCs - Technical Corrigendum 1 (ISO 13274:2013/Cor1:2014)

CEN 6/30/2014

I.S. EN ISO 13354:2014Petroleum and natural gas industries - Drilling and production equipment -Shallow gas diverter equipment (ISO 13354:2014) CEN 6/7/2014

I.S. EN ISO 13482:2014Robots and robotic devices - Safety requirements for personal care robots (ISO13482:2014) CEN 2/15/2014

I.S. EN ISO 13803:2014Paints and varnishes - Determination of haze on paint films at 20Â° (ISO13803:2014) CEN 11/1/2014

I.S. EN ISO 13934-2:2014Textiles - Tensile properties of fabrics - Part 2: Determination of maximum forceusing the grab method (ISO 13934-2:2014) CEN 2/15/2014

I.S. EN ISO 13935-1:2014 Textiles - Seam tensile properties of fabrics and made-up textile articles - Part1: Determination of maximum force to seam rupture using the strip method(ISO 13935-1:2014)

CEN 4/12/2014



Reference Title En Origin Body Publication D..I.S. EN ISO 13934-2:2014Textiles - Tensile properties of fabrics - Part 2: Determination of maximum forceusing the grab method (ISO 13934-2:2014) CEN 2/15/2014

I.S. EN ISO 13935-1:2014Textiles - Seam tensile properties of fabrics and made-up textile articles - Part1: Determination of maximum force to seam rupture using the strip method(ISO 13935-1:2014)

CEN 4/12/2014

I.S. EN ISO 13935-2:2014Textiles - Seam tensile properties of fabrics and made-up textile articles - Part2: Determination of maximum force to seam rupture using the grab method(ISO 13935-2:2014)

CEN 4/12/2014

I.S. EN ISO 14114:2014Gas welding equipment - Acetylene manifold systems for welding, cutting andallied processes - General requirements (ISO 14114:2014) CEN 5/17/2014

I.S. EN ISO 14246:2014Gas cylinders - Cylinder valves - Manufacturing tests and examinations (ISO14246:2014) CEN 8/2/2014

I.S. EN ISO 14389:2014Textiles - Determination of the phthalate content - Tetrahydrofuran method(ISO 14389:2014) CEN 6/21/2014

I.S. EN ISO 14453:2014 Pulps - Determination of acetone-soluble matter (ISO 14453:2014) CEN 4/12/2014

I.S. EN ISO 14730:2014Ophthalmic optics - Contact lens care products - Antimicrobial preservativeefficacy testing and guidance on determining discard date (ISO 14730:2014) CEN 11/1/2014

I.S. EN ISO 15007-1:2014Road vehicles - Measurement of driver visual behaviour with respect totransport information and control systems - Part 1: Definitions and parameters(ISO 15007-1:2014)

CEN 12/1/2014


I.S. EN ISO 15181-6:2014Paints and varnishes - Determination of release rate of biocides from antifoulingpaints - Part 6: Determination of tralopyril release rate by quantitation of itsdegradation product in the extract (ISO 15181-6:2012)

CEN 6/21/2014

I.S. EN ISO 15589-2:2014Petroleum, petrochemical and natural gas industries - Cathodic protection ofpipeline transportation systems - Part 2: Offshore pipelines (ISO 15589-2:2012)CEN 6/11/2014

I.S. EN ISO 15614-12:2014Specification and qualification of welding procedures for metallic materials -Welding procedure test - Part 12: Spot, seam and projection welding (ISO15614-12:2014)

CEN 7/19/2014

I.S. EN ISO 15758:2014Hygrothermal performance of building equipment and industrial installations -Calculation of water vapour diffusion - Cold pipe insulation systems (ISO15758:2014)

CEN 5/17/2014

I.S. EN ISO 15791-1:2013Plastics - Development and use of intermediate-scale fire tests for plasticsproducts - Part 1: General guidance (ISO 15791-1:2014) CEN 2/24/2014

I.S. EN ISO 15841:2014 Dentistry - Wires for use in orthodontics (ISO 15841:2014) CEN 9/6/2014

I.S. EN ISO 15883-1:2009/A1:2014Washer-disinfectors - Part 1: General requirements, terms and definitions andtests (ISO 15883-1:2006/Amd 1:2014) CEN 8/6/2014



I.S. EN ISO 16000-19:2014 Indoor air - Part 19: Sampling strategy for moulds (ISO 16000-19:2012) CEN 10/18/2014

I.S. EN ISO 16000-32:2014Indoor air - Part 32: Investigation of buildings for the occurrence of pollutants(ISO 16000-32:2014) CEN 8/2/2014

I.S. EN ISO 16119-4:2014Agricultural and forestry machinery - Environmental requirements for sprayers -Part 4: Fixed and semi-mobile sprayers (ISO 16119-4:2014) CEN 12/27/2014

I.S. EN ISO 16251-1:2014Acoustics - Laboratory measurement of the reduction of transmitted impactnoise by floor coverings on a small floor mock-up - Part 1: Heavyweightcompact floor (ISO 16251-1:2014)

CEN 8/23/2014

I.S. EN ISO 16297:2014Milk - Bacterial count - Protocol for the evaluation of alternative methods (ISO16297:2013) CEN 5/17/2014

I.S. EN ISO 16373-2:2014Textiles - Dyestuffs - Part 2: General method for the determination ofextractable dyestuffs including allergenic and carcinogenic dyestuffs (methodusing pyridine-water) (ISO 16373-2:2014)

CEN 6/21/2014

I.S. EN ISO 16373-3:2014Textiles - Dyestuffs - Part 3: Method for determination of certain carcinogenicdyestuffs (method using triethylamine/methanol) (ISO 16373-3:2014) CEN 6/21/2014


I.S. EN ISO 16443:2014Dentistry - Vocabulary for dental implants systems and related procedure (ISO16443:2014) CEN 8/6/2014

I.S. EN ISO 16484-6:2014Building automation and control systems (BACS) - Part 6: Data communicationconformance testing (ISO 16484-6:2014) CEN 6/7/2014

I.S. EN ISO 16559:2014 Solid biofuels - Terminology, definitions and descriptions (ISO 16559:2014) CEN 8/6/2014

I.S. EN ISO 16610-71:2014Geometrical product specifications (GPS) - Filtration - Part 71: Robust arealfilters: Gaussian regression filters (ISO 16610-71:2014) CEN 10/11/2014

I.S. EN ISO 16635-1:2014Dentistry - Dental rubber dam technique - Part 1: Hole punch (ISO16635-1:2013) CEN 5/10/2014

I.S. EN ISO 16635-2:2014Dentistry - Dental rubber dam instruments - Part 2: Clamp forceps(ISO16635-2:2014) CEN 10/11/2014

I.S. EN ISO 16665:2013Water quality - Guidelines for quantitative sampling and sample processing ofmarine soft-bottom macrofauna (ISO 16665:2014) CEN 2/24/2014

I.S. EN ISO 16808:2014 Metallic materials - Sheet and strip - Determination of biaxial stress-strain curveby means of bulge test with optical measuring systems (ISO 16808:2014)

CEN 10/4/2014



Reference Title En Origin Body Publication D..I.S. EN ISO 16665:2013Water quality - Guidelines for quantitative sampling and sample processing ofmarine soft-bottom macrofauna (ISO 16665:2014) CEN 2/24/2014

I.S. EN ISO 16808:2014Metallic materials - Sheet and strip - Determination of biaxial stress-strain curveby means of bulge test with optical measuring systems (ISO 16808:2014) CEN 10/4/2014

I.S. EN ISO 16810:2014Non-destructive testing - Ultrasonic testing - General principles (ISO16810:2012) CEN 3/15/2014

I.S. EN ISO 16811:2014Non-destructive testing - Ultrasonic testing - Sensitivity and range setting (ISO16811:2012) CEN 3/15/2014

I.S. EN ISO 16823:2014Non-destructive testing - Ultrasonic testing - Transmission technique (ISO16823:2012) CEN 3/15/2014

I.S. EN ISO 16826:2014Non-destructive testing - Ultrasonic testing - Examination for discontinuitiesperpendicular to the surface (ISO 16826:2012) CEN 3/15/2014

I.S. EN ISO 16827:2014Non-destructive testing - Ultrasonic testing - Characterization and sizing ofdiscontinuities (ISO 16827:2012) CEN 3/15/2014

I.S. EN ISO 16828:2014Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction techniqueas a method for detection and sizing of discontinuities (ISO 16828:2012) CEN 3/15/2014

I.S. EN ISO 16841:2014Steel wire ropes - Pulling eyes for rope installation - Types and minimumrequirements (ISO 16841:2014) CEN 3/15/2014

I.S. EN ISO 16925:2014Paints and varnishes - Determination of the resistance of coatings to pressurewater-jetting (ISO 16925:2014) CEN 2/15/2014

I.S. EN ISO 16927:2014Paints and varnishes - Determination of the overcoatability and recoatability of acoating (ISO 16927:2014) CEN 1/25/2014


I.S. EN ISO 17081:2014Method of measurement of hydrogen permeation and determination ofhydrogen uptake and transport in metals by an electrochemical technique (ISO17081:2014)

CEN 6/21/2014


I.S. EN ISO 17225-1:2014Solid biofuels - Fuel specifications and classes - Part 1: General requirements(ISO 17225-1:2014) CEN 5/17/2014

I.S. EN ISO 17225-2:2014Solid biofuels - Fuel specifications and classes - Part 2: Graded wood pellets(ISO 17225-2:2014) CEN 5/17/2014

I.S. EN ISO 17225-3:2014Solid biofuels - Fuel specifications and classes - Part 3: Graded wood briquettes(ISO 17225-3:2014) CEN 5/17/2014

I.S. EN ISO 17225-4:2014Solid biofuels - Fuel specifications and classes - Part 4: Graded wood chips (ISO17225-4:2014) CEN 5/17/2014

I.S. EN ISO 17225-5:2014Solid biofuels - Fuel specifications and classes - Part 5: Graded firewood (ISO17225-5:2014) CEN 5/17/2014

I.S. EN ISO 17225-6:2014Solid biofuels - Fuel specifications and classes - Part 6: Graded non-woodypellets (ISO 17225-6:2014) CEN 5/17/2014

I.S. EN ISO 17225-7:2014Solid biofuels - Fuel specifications and classes - Part 7: Graded non-woodybriquettes (ISO 17225-7:2014) CEN 5/17/2014

I.S. EN ISO 17249:2013/AC:2014 Safety footwear with resistance to chain saw cutting (ISO 17249:2013) CEN 2/22/2014

I.S. EN ISO 17351:2014 Packaging - Braille on packaging for medicinal products (ISO 17351:2013) CEN 8/2/2014


I.S. EN ISO 17463:2014Paints and varnishes - Guidelines for the determination of anticorrosiveproperties of organic coatings by accelerated cyclic electrochemical technique(ISO 17463:2014)

CEN 8/23/2014

I.S. EN ISO 17516:2014 Cosmetics - Microbiology - Microbiological limits (ISO 17516:2014) CEN 11/1/2014

I.S. EN ISO 17730:2014 Dentistry - Fluoride varnishes (ISO 17730:2014) CEN 12/1/2014

I.S. EN ISO 17824:2014Petroleum and natural gas industries - Downhole equipment - Sand screens(ISO 17824:2009) CEN 8/23/2014

I.S. EN ISO 17855-1:2014Plastics - Polyethylene (PE) moulding and extrusion materials - Part 1:Designation system and basis for specifications (ISO 17855-1:2014) CEN 11/26/2014

I.S. EN ISO 17892-1:2014Geotechnical investigation and testing - Laboratory testing of soil - Part 1:Determination of water content (ISO 17892-1:2014) CEN 12/20/2014

I.S. EN ISO 17892-2:2014Geotechnical investigation and testing - Laboratory testing of soil - Part 2:Determination of bulk density (ISO 17892-2:2014) CEN 12/20/2014

I.S. EN ISO 17994:2014Water quality - Requirements for the comparison of the relative recovery ofmicroorganisms by two quantitative methods (ISO 17994:2014) CEN 3/1/2014

I.S. EN ISO 18082:2014Anaesthetic and respiratory equipment - Dimensions of non-interchangeablescrew-threaded (NIST) low-pressure connectors for medical gases (ISO18082:2014)

CEN 7/5/2014

I.S. EN ISO 18104:2014Health informatics - Categorial structures for representation of nursingdiagnoses and nursing actions in terminological systems (ISO 18104:2014) CEN 2/15/2014

I.S. EN ISO 18541-1:2014 Road vehicles - Standardized access to automotive repair and maintenanceinformation (RMI) - Part 1: General information and use case definition (ISO18541-1:2014)

CEN 10/11/2014



Reference Title En Origin Body Publication D..I.S. EN ISO 18104:2014Health informatics - Categorial structures for representation of nursingdiagnoses and nursing actions in terminological systems (ISO 18104:2014) CEN 2/15/2014

I.S. EN ISO 18541-1:2014Road vehicles - Standardized access to automotive repair and maintenanceinformation (RMI) - Part 1: General information and use case definition (ISO18541-1:2014)

CEN 10/11/2014

I.S. EN ISO 18541-2:2014Road vehicles - Standardized access to automotive repair and maintenanceinformation (RMI) - Part 2: Technical requirements (ISO 18541-2:2014) CEN 10/11/2014

I.S. EN ISO 18541-3:2014Road vehicles - Standardized access to automotive repair and maintenanceinformation (RMI) - Part 3: Functional user interface requirements (ISO18541-3:2014)

CEN 10/11/2014

I.S. EN ISO 18542-2:2014Road vehicles - Standardized repair and maintenance information (RMI)terminology - Part 2: Standardized process implementation requirements,Registration Authority (ISO 18542-2:2014)

CEN 5/17/2014

I.S. EN ISO 18613:2014 Pallets for materials handling - Repair of flat wooden pallets (ISO 18613:2014) CEN 11/26/2014


I.S. EN ISO 19065-1:2014Plastics - Acrylonitrile-styrene-acrylate (ASA),acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) andacrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion ..

CEN 12/20/2014

I.S. EN ISO 19066-1:2014Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) mouldingand extrusion materials - Part 1: Designation system and basis for specifications(ISO 19066-1:2014)

CEN 11/1/2014

I.S. EN ISO 19101-1:2014Geographic information - Reference model - Part 1: Fundamentals (ISO19101-1:2014) CEN 12/7/2014

I.S. EN ISO 19115-1:2014 Geographic information - Metadata - Part 1: Fundamentals (ISO 19115-1:2014) CEN 4/12/2014

I.S. EN ISO 19117:2014 Geographic information - Portrayal (ISO 19117:2012) CEN 4/5/2014

I.S. EN ISO 20346:2014 Personal protective equipment - Protective footwear (ISO 20346:2014) CEN 5/17/2014

I.S. EN ISO 20753:2014 Plastics - Test specimens (ISO 20753:2008) CEN 5/17/2014

I.S. EN ISO 21487:2012/A1:2014Small craft - Permanently installed petrol and diesel fuel tanks - Amendment 1(ISO 21487:2012/Amd 1:2014) CEN 12/30/2014

I.S. EN ISO 21536:2009/A1:2014Non-active surgical implants - Joint replacement implants - Specificrequirements for knee-joint replacement implants - Amendment 1 (ISO21536:2007/Amd 1:2014)

CEN 3/15/2014

I.S. EN ISO 21549-2:2014Health informatics - Patient healthcard data - Part 2: Common objects (ISO21549-2:2014) CEN 3/1/2014

I.S. EN ISO 21549-3:2014Health informatics - Patient healthcard data -- Part 3: Limited clinical data (ISO21549-3:2014) CEN 3/1/2014

I.S. EN ISO 21549-4:2014Health informatics - Patient healthcard data - Part 4: Extended clinical data (ISO21549-4:2014) CEN 3/1/2014

I.S. EN ISO 21670:2014 Fasteners - Hexagon weld nuts with flange (ISO 21670:2014) CEN 6/7/2014

I.S. EN ISO 21809-2:2014Petroleum and natural gas industries - External coatings for buried orsubmerged pipelines used in pipeline transportation systems - Part 2: Singlelayer fusion-bonded epoxy coatings (ISO 21809-2:2014)

CEN 12/1/2014

I.S. EN ISO 22068:2014 Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012) CEN 3/29/2014

I.S. EN ISO 22300:2014 Societal security - Terminology (ISO 22300:2012) CEN 8/15/2014

I.S. EN ISO 22301:2014Societal security - Business continuity management systems - Requirements(ISO 22301:2012) CEN 8/15/2014

I.S. EN ISO 22311:2014 Societal security - Video-surveillance - Export interoperability (ISO 22311:2012) CEN 12/4/2014

I.S. EN ISO 22313:2014Societal security - Business continuity management systems - Guidance (ISO22313:2012) CEN 11/26/2014

I.S. EN ISO 22600-1:2014Health informatics - Privilege management and access control - Part 1:Overview and policy management (ISO 22600-1:2014) CEN 11/1/2014

I.S. EN ISO 22600-2:2014Health informatics - Privilege management and access control - Part 2: Formalmodels (ISO 22600-2:2014) CEN 11/1/2014

I.S. EN ISO 22600-3:2014Health informatics - Privilege management and access control - Part 3:Implementations (ISO 22600-3:2014) CEN 11/1/2014

I.S. EN ISO 22975-3:2014Solar energy - Collector components and materials - Part 3: Absorber surfacedurability (ISO 22975-3:2014) CEN 7/19/2014

I.S. EN ISO 23553-1:2014Safety and control devices for oil burners and oil-burning appliances - Particularrequirements - Part 1: Automatic and semi-automatic valves (ISO23553-1:2014)

CEN 6/7/2014

I.S. EN ISO 24801-1:2014Recreational diving services - Requirements for the training of recreationalscuba divers - Part 1: Level 1 - Supervised diver (ISO 24801-1:2014) CEN 4/12/2014

I.S. EN ISO 24801-2:2014Recreational diving services - Requirements for the training of recreationalscuba divers - Part 2: Level 2 - Autonomous diver (ISO 24801-2:2014) CEN 4/12/2014

I.S. EN ISO 24801-3:2014Recreational diving services - Requirements for the training of recreationalscuba divers - Part 3: Level 3 - Dive leader (ISO 24801-3:2014) CEN 4/12/2014

I.S. EN ISO 24802-1:2014 Recreational diving services - Requirements for the training of scuba instructors- Part 1: Level 1 (ISO 24802-1:2014)

CEN 4/12/2014



Reference Title En Origin Body Publication D..I.S. EN ISO 24801-3:2014Recreational diving services - Requirements for the training of recreationalscuba divers - Part 3: Level 3 - Dive leader (ISO 24801-3:2014) CEN 4/12/2014

I.S. EN ISO 24802-1:2014Recreational diving services - Requirements for the training of scuba instructors- Part 1: Level 1 (ISO 24802-1:2014) CEN 4/12/2014

I.S. EN ISO 24802-2:2014Recreational diving services - Requirements for the training of scuba instructors- Part 2: Level 2 (ISO 24802-2:2014) CEN 4/12/2014

I.S. EN ISO 25178-70:2014Geometrical product specification (GPS) - Surface texture: Areal - Part 70:Material measures (ISO 25178-70:2014) CEN 3/1/2014

I.S. EN ISO 25178-605:2014Geometrical product specifications (GPS) - Surface texture: Areal - Part 605:Nominal characteristics of non-contact (point autofocus probe) instruments (ISO25178-605:2014)

CEN 2/1/2014

I.S. EN ISO 25197:2012/A1:2014Small craft - Electrical/electronic control systems for steering, shift and throttle -Amendment 1 (ISO 25197:2012/Amd 1:2014) CEN 12/30/2014

I.S. EN ISO 25980:2014Health and safety in welding and allied processes - Transparent weldingcurtains, strips and screens for arc welding processes (ISO 25980:2014) CEN 11/1/2014

I.S. EN ISO 27627:2014Petroleum and natural gas industries - Aluminium alloy drill pipe threadconnection gauging (ISO 27627:2014) CEN 4/29/2014

I.S. EN ISO 29822:2014Vegetable fats and oils - Isomeric diacylglycerols - Determination of relativeamounts of 1,2- and 1,3-diacylglycerols (ISO 29822:2009) CEN 4/29/2014

I.S. EN ISO 29841:2014Vegetable fats and oils - Determination of the degradation products ofchlorophylls a and a' (pheophytins a, a' and pyropheophytins) (ISO 29841:2009)CEN 4/29/2014

I.S. EN ISO 80601-2-69:2014Medical electrical equipment - Part 2-69: Particular requirements for basic safetyand essential performance of oxygen concentrator equipment (ISO80601-2-69:2014)

CEN 8/2/2014

I.S. EN ISO 81060-2:2014Non-invasive sphygmomanometers - Part 2: Clinical investigation of automatedmeasurement type (ISO 81060-2:2013) CEN 5/10/2014

I.S. EN ISO/IEC 19788-5:2014Information technology - Learning, education and training - Metadata forlearning resources - Part 5: Educational elements (ISO/IEC 19788-5:2012) CEN 1/25/2014

S.R. CEN ISO/TR 6579-3:2014Microbiology of the food chain - Horizontal method for the detection,enumeration and serotyping of Salmonella - Part 3: Guidelines for serotyping ofSalmonella spp. (ISO/TR 6579-3:2014)

CEN 8/6/2014

S.R. CEN ISO/TR 16060:2014Destructive tests on welds in metallic materials - Etchants for macroscopic andmicroscopic examination (ISO/TR 16060:2003) CEN 8/30/2014

S.R. CEN ISO/TR 22007-5:2014Plastics - Determination of thermal conductivity and thermal diffusivity - Part 5:Results of interlaboratory testing of poly(methyl methacrylate) samples (ISO/TR22007-5:2011)

CEN 7/30/2014

S.R. CEN ISO/TS 9241-411:2014Ergonomics of human-system interaction - Part 411: Evaluation methods for thedesign of physical input devices (ISO/TS 9241-411:2012) CEN 9/6/2014

S.R. CEN ISO/TS 13004:2014Sterilization of health care products - Radiation - Substantiation of selectedsterilization dose: Method VDmaxSD (ISO/TS 13004:2013) CEN 7/1/2014

S.R. CEN ISO/TS 14067:2014Greenhouse gases - Carbon footprint of products - Requirements and guidelinesfor quantification and communication (ISO/TS 14067:2013) CEN 7/12/2014

S.R. CEN ISO/TS 16775:2014Packaging for terminally sterilized medical devices - Guidance on the applicationof ISO 11607-1 and ISO 11607-2 (ISO/TS 16775:2014) CEN 6/7/2014

S.R. CEN ISO/TS 17419:2014Intelligent transport systems - Cooperative systems - Classification andmanagement of ITS applications in a global context (ISO/TS 17419:2014) CEN 4/29/2014

S.R. CEN ISO/TS 17423:2014Intelligent transport systems - Cooperative systems - ITS applicationrequirements and objectives for selection of communication profiles (ISO/TS17423:2014)

CEN 4/29/2014

S.R. CEN ISO/TS 17427:2014Intelligent transport systems - Cooperative systems - Roles and responsibilitiesin the context of cooperative ITS based on architecture(s) for cooperativesystems (ISO/TS 17427:2014)

CEN 7/19/2014

S.R. CEN ISO/TS 29843-1:2014Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CEN 11/8/2014

S.R. CEN ISO/TS 29843-2:2014Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CEN 10/18/2014

S.R. CEN ISO/TS 80004-3:2014Nanotechnologies - Vocabulary - Part 3: Carbon nano-objects (ISO/TS80004-3:2010) CEN 12/27/2014

S.R. CEN ISO/TS 80004-4:2014Nanotechnologies - Vocabulary - Part 4: Nanostructured materials (ISO/TS80004-4:2011) CEN 12/27/2014

S.R. CEN/CLC/ETSI TR 101550:2014Documents relevant to EN 301 549 "Accessibility requirements suitable forpublic procurement of ICT products and services in Europe" CEN 3/1/2014

S.R. CEN/CLC/ETSI TR 101551:2014Guidelines on the use of accessibility award criteria suitable for publicprocurement of ICT products and services in Europe CEN 3/1/2014

S.R. CEN/CLC/ETSI/TR 101 552:2014Guidance for the application of conformity assessment to accessibilityrequirements for public procurement of ICT products and services in Europe CEN 4/2/2014

S.R. CEN/CLC/TR 14060:2014 Medical device traceability enabled by unique device identification (UDI) CEN 12/20/2014

S.R. CEN/TR 81-12:2014Safety rules for the construction and installation of lifts - Basics andinterpretations - Part 12: Use of EN 81-20 and EN 81-50 in specific markets CEN 11/1/2014

S.R. CEN/TR 1749:2014Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CEN 7/12/2014

S.R. CEN/TR 10317:2014European certified reference materials (EURONORM-CRMs) for thedetermination of the chemical composition of iron and steel products preparedunder the auspices of the European Committee for Iron and Steel Standardizat..

CEN 12/13/2014

S.R. CEN/TR 10362:2014 Chemical analysis of ferrous materials - Determination of selenium in steels -Electrothermal atomic absorption spectrometric method

CEN 12/13/2014



Reference Title En Origin Body Publication D..S.R. CEN/TR 10317:2014

European certified reference materials (EURONORM-CRMs) for thedetermination of the chemical composition of iron and steel products preparedunder the auspices of the European Committee for Iron and Steel Standardizat..CEN 12/13/2014

S.R. CEN/TR 10362:2014Chemical analysis of ferrous materials - Determination of selenium in steels -Electrothermal atomic absorption spectrometric method CEN 12/13/2014

S.R. CEN/TR 12872:2014Wood-based panels - Guidance on the use of load-bearing boards in floors,walls and roofs CEN 12/27/2014

S.R. CEN/TR 13201-1:2014 Road lighting - Part 1: Guidelines on selection of lighting classes CEN 12/23/2014

S.R. CEN/TR 13205-3:2014Workplace exposure - Assessment of sampler performance for measurement ofairborne particle concentrations - Part 3: Analysis of sampling efficiency data CEN 7/12/2014

S.R. CEN/TR 13801:2014Plastics piping systems for soil and waste discharge (low and high temperature)within the building structure - Thermoplastics - Recommended practice forinstallation

CEN 5/3/2014

S.R. CEN/TR 14245:2014 Cement - Guidelines for the application of EN 197-2 Conformity Evaluation CEN 10/4/2014

S.R. CEN/TR 14473:2014 Transportable gas cylinders - Porous materials for acetylene cylinders CEN 4/5/2014

S.R. CEN/TR 15149-3:2014Solid biofuels - Determination of particle size distribution - Part 3: Rotary screenmethod CEN 12/13/2014

S.R. CEN/TR 15339-1:2014Thermal spraying - Safety requirements for thermal spraying equipment - Part1: General requirements CEN 12/27/2014

S.R. CEN/TR 15339-3:2014Thermal spraying - Safety requirements for thermal spraying equipment - Part3: Torches for thermal spraying and their connection and supply units CEN 12/27/2014

S.R. CEN/TR 15339-4:2014Thermal spraying - Safety requirements for thermal spraying equipment - Part4: Gas and liquid fuel supply CEN 12/27/2014

S.R. CEN/TR 15339-5:2014Thermal spraying - Safety requirements for thermal spraying equipment - Part5: Powder and wire feed units CEN 12/27/2014

S.R. CEN/TR 15339-6:2014Thermal spraying - Safety requirements for thermal spraying equipment - Part6: Spray booth, Handling system, Dust collection, Exhaust system, Filter CEN 5/31/2014

S.R. CEN/TR 15367-1:2014Petroleum products - Guidelines for good housekeeping - Part 1: Automotivediesel fuels CEN 10/25/2014

S.R. CEN/TR 15589:2014Non destructive testing - Code of practice for the approval of NDT personnel byrecognised third party organisations under the provisions of Directive 97/23/EC CEN 3/1/2014

S.R. CEN/TR 15872:2014Health informatics - Guidance on patient identification and cross-referencing ofidentities CEN 3/22/2014

S.R. CEN/TR 16394:2014 Characterization of sludges - Protocol for preparing synthetic suspensions CEN 12/13/2014

S.R. CEN/TR 16513:2014 Railway applications - Track - Survey of track geometry quality CEN 4/5/2014

S.R. CEN/TR 16588:2014 Manual measurement of snow water equivalent CEN 3/29/2014

S.R. CEN/TR 16598:2014 Collection of rationales for EN 1176 - Requirements CEN 3/1/2014

S.R. CEN/TR 16626:2014Vitrified clay pipe systems for drains and sewers - Guidance for voluntarythird-party certification procedures CEN 1/18/2014

S.R. CEN/TR 16632:2014Isothermal Conduction Calorimetry (ICC) for the determination of heat ofhydration of cement: State of Art Report and Recommendations CEN 7/5/2014

S.R. CEN/TR 16638:2014Non-destructive testing - Penetrant and magnetic particle testing using bluelight CEN 3/1/2014

S.R. CEN/TR 16639:2014Use of k-value concept, equivalent concrete performance concept andequivalent performance of combinations concept CEN 4/5/2014

S.R. CEN/TR 16663:2014Durability of wood and wood-based products - Determination of emissions frompreservative treated wood to the environment - Wooden commodities exposedin Use Class 3 (Not covered, not in contact with the ground) - Semi-field meth..

CEN 6/7/2014

S.R. CEN/TR 16669:2014 Information technology - Device interface to support ISO/IEC 18000-3 CEN 6/21/2014

S.R. CEN/TR 16670:2014 Information technology - RFID threat and vulnerability analysis CEN 6/21/2014

S.R. CEN/TR 16671:2014Information technology - Authorization of mobile phones when used as RFIDinterrogators CEN 6/21/2014

S.R. CEN/TR 16672:2014Information technology - Privacy capability features of current RFIDtechnologies CEN 6/21/2014

S.R. CEN/TR 16673:2014Information technology - RFID privacy impact assessment analysis for specificsectors CEN 6/21/2014

S.R. CEN/TR 16674:2014Information technology - Analysis of privacy impact assessment methodologiesrelevant to RFID CEN 6/21/2014

S.R. CEN/TR 16676:2014 Energy losses by industrial door CEN 11/26/2014

S.R. CEN/TR 16680:2014Liquid petroleum products - Investigation on internal diesel injector stickingdeposits mechanisms and the impacts of corrosion inhibitors CEN 3/1/2014

S.R. CEN/TR 16684:2014 Information technology - Notification of RFID - Additional information to beprovided by operators

CEN 6/21/2014



Reference Title En Origin Body Publication D..S.R. CEN/TR 16680:2014Liquid petroleum products - Investigation on internal diesel injector stickingdeposits mechanisms and the impacts of corrosion inhibitors CEN 3/1/2014

S.R. CEN/TR 16684:2014Information technology - Notification of RFID - Additional information to beprovided by operators CEN 6/21/2014

S.R. CEN/TR 16690:2014Electronic fee collection - Guidelines for EFC applications based on in-vehicle ITSstations CEN 7/19/2014

S.R. CEN/TR 16699:2014Foodstuffs - Determination of pesticide residues by GC-MS/MS - Tandem massspectrometric parameters CEN 7/26/2014

S.R. CEN/TR 16706:2014Postal Services - Quality of Service - Measurement of incorrect delivery -Feasibility Report CEN 8/9/2014

S.R. CEN/TR 16721:2014 Bio-based products - Overview of methods to determine the bio-based content CEN 8/23/2014

S.R. CEN/TR 16742:2014Intelligent transport systems - Privacy aspects in ITS standards and systems inEurope CEN 11/1/2014

S.R. CEN/TR 16748:2014Aluminium and aluminium alloys - Mechanical potential of Al-Si alloys for highpressure, low pressure and gravity die casting CEN 12/20/2014

S.R. CEN/TR 16749:2014Aluminium and aluminium alloys - Classification of Defects and Imperfections inHigh Pressure, Low Pressure and Gravity Die Cast Products CEN 11/1/2014

S.R. CEN/TR 16787:2014Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CEN 12/7/2014

S.R. CEN/TR 16788:2014 Characterization of sludges - Guideline of good practice for thermal processes CEN 12/24/2014

S.R. CEN/TS 1452-7:2014Plastics piping systems for water supply and for buried and above-grounddrainage and sewerage under pressure - Unplasticized poly(vinyl chloride)(PVC-U) - Part 7: Guidance for the assessment of conformity

CEN 2/10/2014

S.R. CEN/TS 12201-7:2014Plastics piping systems for water supply, and for drainage and sewerage underpressure - Polyethylene (PE) - Part 7: Guidance for the assessment ofconformity

CEN 3/8/2014

S.R. CEN/TS 12633:2014Method of polishing specimens prior to the measurement of slip and skidresistance CEN 10/4/2014

S.R. CEN/TS 13286-54:2014Unbound and hydraulically bound mixtures - Part 54: Test method for thedetermination of frost susceptibility - Resistance to freezing and thawing ofhydraulically bound mixtures

CEN 11/1/2014

S.R. CEN/TS 13649:2014Stationary source emissions - Determination of the mass concentration ofindividual gaseous organic compounds - Sorptive sampling method followed bysolvent extraction or thermal desorption

CEN 12/20/2014

S.R. CEN/TS 14416:2014 Geosynthetic barriers - Test method for determining the resistance to roots CEN 3/8/2014

S.R. CEN/TS 14417:2014Geosynthetic barriers - Test method for the determination of the influence ofwetting-drying cycles on the permeability of clay geosynthetic barriers CEN 11/1/2014

S.R. CEN/TS 14418:2014Geosynthetic Barriers - Test method for the determination of the influence offreezing-thawing cycles on the permeability of clay geosynthetic barriers CEN 11/1/2014

S.R. CEN/TS 15448:2014Postal services - Open standard interface between image controller andenrichment devices (OCRs, video coding systems, voting systems) CEN 12/20/2014

S.R. CEN/TS 15480-3:2014Identification card systems - European Citizen Card - Part 3: European CitizenCard Interoperability using an application interface CEN 4/12/2014

S.R. CEN/TS 15548-1:2014Thermal insulation products for building equipment and industrial installations -Determination of thermal resistance by means of the guarded hot plate method- Part 1: Measurements at elevated temperatures from 100 Â°C to 850 Â°C

CEN 8/23/2014

S.R. CEN/TS 15901-15:2014Road and airfield surface characteristics - Part 15: Procedure for determiningthe skid resistance of a pavement surface using a device with longitudinalcontrolled slip (LFCI): The IMAG

CEN 11/1/2014

S.R. CEN/TS 15963:2014Bitumen and bituminous binders - Determination of the fracture toughnesstemperature by a three point bending test on a notched specimen CEN 5/10/2014

S.R. CEN/TS 16157-4:2014Intelligent transport systems - DATEX II data exchange specifications for trafficmanagement and information - Part 4: Variable Message Sign (VMS)Publications

CEN 5/10/2014

S.R. CEN/TS 16157-5:2014Intelligent transport systems - DATEX II data exchange specifications for trafficmanagement and information - Part 5: Measured and elaborated datapublications

CEN 5/10/2014

S.R. CEN/TS 16163:2014Conservation of Cultural Heritage - Guidelines and procedures for choosingappropriate lighting for indoor exhibitions CEN 5/10/2014

S.R. CEN/TS 16214-2:2014Sustainability criteria for the production of biofuels and bioliquids for energyapplications - Principles, criteria, indicators and verifiers - Part 2: Conformityassessment including chain of custody and mass balance

CEN 1/25/2014

S.R. CEN/TS 16272-5:2014Railway applications - Track - Noise barriers and related devices acting onairborne sound propagation - Test method for determining the acousticperformance - Part 5: Intrinsic characteristics - In situ values of sound reflectio..

CEN 8/12/2014

S.R. CEN/TS 16368:2014 Lightweight Particleboards - Specifications CEN 3/29/2014

S.R. CEN/TS 16595:2013 CBRN - Vulnerability Assessment and Protection of People at Risk CEN 2/23/2014

S.R. CEN/TS 16599:2014Photocatalysis - Irradiation conditions for testing photocatalytic properties ofsemiconducting materials and the measurement of these conditions CEN 4/5/2014

S.R. CEN/TS 16614-1:2014Public transport - Network and Timetable Exchange (NeTEx) - Part 1: Publictransport network topology exchange format CEN 5/31/2014

S.R. CEN/TS 16614-2:2014Public transport - Network and Timetable Exchange (NeTEx) - Part 2: Publictransport scheduled timetables exchange format CEN 5/31/2014

S.R. CEN/TS 16621:2014 Food analysis - Determination of benzo[a]pyrene, benz[a]anthracene, chryseneand benzo[b]fluoranthene in foodstuffs by high performance liquidchromatography with fluorescence detection (HPLC-FD)

CEN 5/3/2014



Reference Title En Origin Body Publication D..S.R. CEN/TS 16614-2:2014Public transport - Network and Timetable Exchange (NeTEx) - Part 2: Publictransport scheduled timetables exchange format CEN 5/31/2014

S.R. CEN/TS 16621:2014Food analysis - Determination of benzo[a]pyrene, benz[a]anthracene, chryseneand benzo[b]fluoranthene in foodstuffs by high performance liquidchromatography with fluorescence detection (HPLC-FD)

CEN 5/3/2014

S.R. CEN/TS 16628:2014 Energy Performance of Buildings - Basic Principles for the set of EPB standards CEN 8/16/2014

S.R. CEN/TS 16629:2014Energy Performance of Buildings - Detailed Technical Rules for the set ofEPB-standards CEN 8/16/2014

S.R. CEN/TS 16634:2014Personal identification - Recommendations for using biometrics in EuropeanAutomated Border Control CEN 4/19/2014

S.R. CEN/TS 16637-1:2014Construction products - Assessment of release of dangerous substances - Part1: Guidance for the determination of leaching tests and additional testing steps CEN 9/6/2014

S.R. CEN/TS 16637-2:2014Construction products - Assessment of release of dangerous substances - Part2: Horizontal dynamic surface leaching test CEN 9/6/2014

S.R. CEN/TS 16641:2014 Textile floor coverings - Guidelines for acceptable colour deviations CEN 3/29/2014

S.R. CEN/TS 16645:2014Ambient air - Method for the measurement of benz[a]anthracene,benzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene,dibenz[a,h]anthracene, indeno[1,2,3-cd]pyrene and benzo[ghi]perylene

CEN 5/3/2014

S.R. CEN/TS 16650:2014Specification for hose couplings for petrol, oil and lubricants - High pressurecouplings CEN 6/21/2014

S.R. CEN/TS 16675:2014Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CEN 9/27/2014

S.R. CEN/TS 16685:2014Information technology - Notification of RFID - The information sign to bedisplayed in areas where RFID interrogators are deployed CEN 6/21/2014

S.R. CEN/TS 16700:2014Paints and varnishes - Coating materials and coating systems for exterior wood- Assessment of resistance to impact of a coating on a wooden substrate CEN 9/6/2014

S.R. CEN/TS 16702-1:2014Electronic fee collection - Secure monitoring for autonomous toll systems - Part1: Compliance checking CEN 11/26/2014

S.R. CEN/TS 16707:2014Foodstuffs - Methods of analysis for the detection of genetically modifiedorganisms and derived products - Polymerase chain reaction (PCR) basedscreening strategies

CEN 10/25/2014

S.R. CEN/TS 16731:2014Foodstuffs - Determination of hydride-reactive arsenic compounds in rice byatomic absorption spectrometry (Hydride-AAS) following acid extraction CEN 11/26/2014

S.R. CEN/TS 419241:2014 Security Requirements for Trustworthy Systems Supporting Server Signing CEN 4/5/2014

S.R. CLC/Guide 32:2014Guidelines for Safety Related Risk Assessment and Risk Reduction for LowVoltage Equipment CENELEC 8/6/2014

S.R. CLC/TR 50083-2-1:2014Cable networks for television signals, sound signals and interactive services -Part 2-1: Electromagnetic compatibility measurements CENELEC 10/2/2014

S.R. CLC/TR 50083-2-2:2014Cable networks for television signals, sound signals and interactive services -Part 2-2: Interference issues for DVB-T reception in the presence of LTE basestation signals

CENELEC 11/6/2014

S.R. CLC/TR 50083-10-1:2014Cable networks for television signals, sound signals and interactive services -Part 10-1: Guidelines for the implementation of return paths in cable networks CENELEC 6/25/2014

S.R. CLC/TR 50542-1:2014Railway applications - Driver's cab train display controller (TDC) - Part 1:General architecture CENELEC 11/11/2014

S.R. CLC/TR 50584:2014Information technology - CENELEC/ETSI Glossary of terms and definitions forbroadband deployment including sustainability aspects CENELEC 10/24/2014

S.R. CLC/TR 50609:2014 Technical Guidelines for Radial HVDC Networks CENELEC 3/11/2014

S.R. CLC/TR 50610:2014 Railway applications - Train Modes functional interface specification CENELEC 10/24/2014

S.R. CLC/TR 50619:2014 Guidance on how to conduct Round Robin Tests CENELEC 3/3/2014

S.R. CLC/TR 50623:2014 Railway applications - Functional Interface Specification - Door System CENELEC 7/18/2014

S.R. CLC/TR 50624:2014 Railway applications - Functional Interface Specification - Pantograph System CENELEC 7/18/2014

S.R. CLC/TS 50083-3-3:2014Cable networks for television signals, sound signals and interactive services -Part 3-3: Active wideband equipment for cable networks - Methods ofmeasurement of the maximum operating output level in the return path

CENELEC 11/27/2014

S.R. CLC/TS 50131-2-8:2012/IS1:2014Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors -Shock detectors CENELEC 3/11/2014

S.R. CLC/TS 50131-2-10:2014Alarm systems - Intrusion and hold-up systems - Part 2-10: Intrusion detectors- Lock state contacts (magnetic) CENELEC 1/21/2014

S.R. CLC/TS 50131-9:2014Alarm systems - Intrusion and hold-up systems - Part 9: Alarm verification -Methods and principles CENELEC 7/3/2014

S.R. CLC/TS 50131-11:2012/IS1:2014 Alarm systems - Intrusion and hold-up systems - Part 11: Hold-up devices CENELEC 3/11/2014

S.R. CLC/TS 50560:2014 Interoperability framework requirement specification CENELEC 11/17/2014

S.R. CLC/TS 50574-2:2014 Collection, logistics & treatment requirements for end-of-life householdappliances containing volatile fluorocarbons or volatile hydrocarbons - Part 2:specification for de-pollution

CENELEC 11/27/2014



Reference Title En Origin Body Publication D..S.R. CLC/TS 50560:2014 Interoperability framework requirement specification CENELEC 11/17/2014

S.R. CLC/TS 50574-2:2014Collection, logistics & treatment requirements for end-of-life householdappliances containing volatile fluorocarbons or volatile hydrocarbons - Part 2:specification for de-pollution

CENELEC 11/27/2014

S.R. CLC/TS 62603-1:2014Industrial process control systems - Guideline for evaluating process controlsystems - Part 1: Specifications CENELEC 10/28/2014

S.R. CWA 16234-3:2014European e-Competence Framework Version 3.0 - Part 3: Building the e-CF - Acombination of sound methodology and expert contribution CEN 4/29/2014

S.R. CWA 16234-4:2014European e-Competence Framework Version 3.0 - Part 4: Case studies for theapplication of the European e-Competence Framework 3.0 CEN 4/29/2014

S.R. CWA 16259:2014 Responsible Remote Gambling Measures CEN 3/22/2014

S.R. CWA 16374-29:2014Extensions for Financial Services (XFS) interface specification - Release 3.20 -Part 29: XFS MIB Architecture and SNMP Extensions MIB 3.20 CEN 10/11/2014

S.R. CWA 16374-30:2014Extensions for Financial Services (XFS) interface specification - Release 3.20 -Part 30: XFS MIB Device Specific Definitions - Printer Device Class MIB 3.20 CEN 10/11/2014

S.R. CWA 16374-31:2014Extensions for Financial Services (XFS) interface specification â€“ Release 3.20â€“ Part 31: XFS MIB Device Specific Definitions â€“ Identification Card DeviceClass MIB 3.20

CEN 10/11/2014

S.R. CWA 16374-32:2014Extensions for Financial Services (XFS) interface specification â€“ Release 3.20â€“ Part 32: XFS MIB Device Specific Definitions â€“ Cash Dispenser DeviceClass MIB 3.20

CEN 10/11/2014

S.R. CWA 16374-33:2014Extensions for Financial Services (XFS) interface specification â€“ Release 3.20â€“ Part 33: XFS MIB Device Specific Definitions â€“ PIN Keypad Device ClassMIB 3.20

CEN 10/11/2014

S.R. CWA 16374-34:2014Extensions for Financial Services (XFS) interface specification â€“ Release 3.20â€“ Part 34: XFS MIB Device Specific Definitions - Check Reader/Scanner DeviceClass MIB 3.20

CEN 10/11/2014

S.R. CWA 16374-35:2014Extensions for Financial Services (XFS) interface specification â€“ Release 3.20â€“ Part 35: XFS MIB Device Specific Definitions â€“ Depository Device ClassMIB 3.20

CEN 10/11/2014

S.R. CWA 16374-36:2014Extensions for Financial Services (XFS) interface specification â€“ Release 3.20â€“ Part 36: XFS MIB Device Specific Definitions â€“ Text Terminal Unit DeviceClass MIB 3.20

CEN 10/11/2014

S.R. CWA 16374-37:2014Extensions for Financial Services (XFS) interface specification â€“ Release 3.20â€“ Part 37: XFS MIB Device Specific Definitions â€“ Sensors and Indicators UnitDevice Class MIB 3.20

CEN 10/11/2014

S.R. CWA 16374-38:2014Extensions for Financial Services (XFS) interface specification â€“ Release 3.20â€“ Part 38: XFS MIB Device Specific Definitions â€“ Camera Device Class MIB3.20

CEN 10/11/2014

S.R. CWA 16374-39:2014Extensions for Financial Services (XFS) interface specification â€“ Release 3.20â€“ Part 39: XFS MIB Device Specific Definitions â€“ Alarm Device Class MIB3.20

CEN 10/11/2014

S.R. CWA 16374-40:2014Extensions for Financial Services (XFS) interface specification - Release 3.20 -Part 40: XFS MIB Device Specific Definitions â€“ Card Embossing Unit DeviceClass MIB 3.20

CEN 10/11/2014

S.R. CWA 16374-41:2014Extensions for Financial Services (XFS) interface specification â€“ Release 3.20â€“ Part 41: XFS MIB Device Specific Definitions â€“ Cash-In Module DeviceClass MIB 3.20

CEN 10/11/2014

S.R. CWA 16374-43:2014Extensions for Financial Services (XFS) interface specification - Release 3.20 -Part 43: XFS MIB Device Specific Definitions - Vendor Dependent Mode ClassMIB 3.20

CEN 10/11/2014

S.R. CWA 16374-44:2014Extensions for Financial Services (XFS) interface specification â€“ Release 3.20â€“ Part 44: XFS MIB Application Management MIB 3.20 CEN 10/11/2014

S.R. CWA 16374-45:2014Extensions for Financial Services (XFS) interface specification â€“ Release 3.20 -Part 45: XFS MIB Device Specific Definitions - Card Dispenser Device Class MIB3.20

CEN 10/11/2014

S.R. CWA 16374-46:2014Extensions for Financial Services (XFS) interface specification â€“ Release 3.20â€“ Part 46: XFS MIB Device Specific Definitions â€“ Barcode Reader DeviceClass MIB 3.20

CEN 10/11/2014

S.R. CWA 16374-47:2014Extensions for Financial Services (XFS) interface specification â€“ Release 3.20â€“ Part 47: XFS MIB Device Specific Definitions â€“ Item Processing ModuleDevice Class MIB Version 3.20

CEN 10/11/2014

S.R. CWA 16744-1:2014Improving transparency in financial and business reporting - Harmonisationtopics - Part 1: European Data Point Methodology for supervisory reporting CEN 4/19/2014

S.R. CWA 16744-2:2014Improving transparency in financial and business reporting - Harmonisationtopics - Part 2: Guidelines for Data Point Modelling CEN 4/19/2014

S.R. CWA 16744-3:2014Improving transparency in financial and business reporting - Harmonisationtopics - Part 3: European XBRL Taxonomy Architecture CEN 4/19/2014

S.R. CWA 16744-4:2014Improving transparency in financial and business reporting - Harmonisationtopics - Part 4: European Filing Rules CEN 4/19/2014

S.R. CWA 16744-5:2014Improving transparency in financial and business reporting - Harmonisationtopics - Part 5: Mapping between DPM and MDM CEN 4/19/2014

S.R. CWA 16745:2014 Improving transparency in financial and business reporting - Metadata containerCEN 4/19/2014

S.R. CWA 16746-1:2014Improving transparency in financial and business reporting - Standardregulatory roll-out package for better adoption - Part 1: XBRL SupervisoryRoll-out Guide

CEN 4/19/2014

S.R. CWA 16746-2:2014Improving transparency in financial and business reporting - Standardregulatory roll-out package for better adoption - Part 2: XBRL Handbook forDeclarers

CEN 4/19/2014

S.R. CWA 16762:2014CEN Workshop Agreement - CEN/WS SERES - ICT Standards in Support of aneReporting Framework for the Engineering Materials Sector CEN 7/1/2014

S.R. CWA 16768:2014 Framework for Sustainable Value Creation in Manufacturing Network CEN 7/1/2014

S.R. CWA 16799:2014 Validation of computational solid mechanics models CEN 10/4/2014



Reference Title En Origin Body Publication D..S.R. CWA 16768:2014 Framework for Sustainable Value Creation in Manufacturing Network CEN 7/1/2014

S.R. CWA 16799:2014 Validation of computational solid mechanics models CEN 10/4/2014

S.R. CWA 16814:2014Nutritionally correct low-cost food for people at risk of poverty - General,specific requirements and labelling of CHANCE food CEN 11/1/2014

S.R. CWA 16833:2014Glossary of Terms for Holistic Management of Brownfield Regeneration(GoT-HOMBRE) CEN 12/27/2014



Number of Records found - NSAI - NSAI

Documents

Transcript of Number of Records found - NSAI - NSAI