Nulinx-IP Link Compact - IMT Integrated Microwave … · Split IDU/ODU MIMO Space ... high...

4
Nulinx-IP Link— Compact Point-to-Point Hybrid IP/ASI microwave radio Features: 5.8 GHz-42GHz High Spectral efficiencies Adaptive Coding & Modulation (ACM) QPSK-2048 QAM Ultra deep buffering for bursty traffic AES-256 radio encryption Up to 30% more capacity using innovative Header De-Duplication Secured protocols and management interfaces (HTTPS, TLS, SSH, SNMPv3) Up to 2Gbps radio throughput using 4 radios Options: High-power indoor All Indoor unit Split IDU/ODU MIMO Space Diversity XPIC (Cross Polarity) Hot Standby RF Frequency Aggregation Application: Broadcasting STL/TSL/ICR IMT’s Nulinx-IP Compact is a power ful self-contained point to point bi -directional microwave link, in an easy to install package that brings the high reliability and scalability of carrier grade microwave to broadcast- ers. The Nulinx-IP Compact supports data rates as high as 600 Mbps in a 30 MHz Part 101 channel using a single set of antennas, and as high as 1200 Mbps using MIMO technology. It operates with as little as 75 MHz transmit/receive frequency spacing and can use traditional Part 74 (BAS) and Part 101 (Fixed Microwave Service) microwave channels. Available as an all-indoor or split system on any licensed or unlicensed band from 5.8 through 42 GHz, IMT’s Nulinx-IP Compact has the flexibility and expandability to grow with the users needs. In addition to providing the radio hardware, IMT provides full system design and planning, and offers installation and commissioning services. As broadcasters move from ASI to IP based video transport, IMT helps you support today’s hybrid network requirements and provides a simple transition path for microwave modernization. As auxiliary spectrum becomes more and more scarce, making maximum use of available channel space is essential. The Nulinx-IP Compact offers adaptive modulation constellations up to 2048 QAM, so more bits move in the same amount of spectrum. Adaptive modulation nearly eliminates outages when atmospheric conditions, such as heavy rain, do not support the highest data rates. Advanced Quality of Service (QoS) controls insure that essential program traffic continues to flow. Header deduplication and other built-in data compression techniques offer greater throughput in the same spectrum space. Nulinx-IP Compact consists of a rugged outdoor unit, and a power over Ethernet (PoE) injector. Legacy ASI traffic is supported through a special transparent ASI to IP multiplexer, that requires no PID remapping. Up to four ASI streams may be transported in each direction. IMTs delivers the industry’s most cost-effective and high-capacity solu- tions for all backhaul and STL modernization challenges.

Transcript of Nulinx-IP Link Compact - IMT Integrated Microwave … · Split IDU/ODU MIMO Space ... high...

Nulinx-IP Link— Compact Point-to-Point Hybrid IP/ASI microwave

radio

Features: 5.8 GHz-42GHz

High Spectral efficiencies

Adaptive Coding & Modulation

(ACM)

QPSK-2048 QAM

Ultra deep buffering for bursty

traffic

AES-256 radio encryption

Up to 30% more capacity using

innovative Header De-Duplication

Secured protocols and management

interfaces (HTTPS, TLS, SSH,

SNMPv3)

Up to 2Gbps radio throughput using

4 radios

Options: High-power indoor

All Indoor unit

Split IDU/ODU

MIMO

Space Diversity

XPIC (Cross Polarity)

Hot Standby

RF Frequency Aggregation

Application:

Broadcasting STL/TSL/ICR

IMT’s Nulinx-IP Compact is a powerful self-contained point to point bi

-directional microwave link, in an easy to install package that brings the

high reliability and scalability of carrier grade microwave to broadcast-

ers. The Nulinx-IP Compact supports data rates as high as 600 Mbps in a

30 MHz Part 101 channel using a single set of antennas, and as high as

1200 Mbps using MIMO technology. It operates with as little as 75 MHz

transmit/receive frequency spacing and can use traditional Part 74 (BAS)

and Part 101 (Fixed Microwave Service) microwave channels. Available

as an all-indoor or split system on any licensed or unlicensed band from

5.8 through 42 GHz, IMT’s Nulinx-IP Compact has the flexibility and

expandability to grow with the users needs.

In addition to providing the radio hardware, IMT provides full system

design and planning, and offers installation and commissioning services.

As broadcasters move from ASI to IP based video transport, IMT helps

you support today’s hybrid network requirements and provides a simple

transition path for microwave modernization.

As auxiliary spectrum becomes more and more scarce, making maximum

use of available channel space is essential. The Nulinx-IP Compact offers

adaptive modulation constellations up to 2048 QAM, so more bits move

in the same amount of spectrum. Adaptive modulation nearly eliminates

outages when atmospheric conditions, such as heavy rain, do not support

the highest data rates. Advanced Quality of Service (QoS) controls insure

that essential program traffic continues to flow. Header deduplication and

other built-in data compression techniques offer greater throughput in the

same spectrum space.

Nulinx-IP Compact consists of a rugged outdoor unit, and a power over

Ethernet (PoE) injector. Legacy ASI traffic is supported through a special

transparent ASI to IP multiplexer, that requires no PID remapping. Up to

four ASI streams may be transported in each direction.

IMTs delivers the industry’s most cost-effective and high-capacity solu-

tions for all backhaul and STL modernization challenges.

Specifications

RF Performance: Supported Bands ....................5.8-42GHz Number of radio cores………………..Single, Dual Traffic Protection ....................Hot Standby, Hot Standby with XPIC Ethernet recovery time…………… Dependent on protection, hitless or 50 ms Adaptive Power……………………….. Up to 20 dB dynamic range

Modulation Modulation Modulation Formats: ...............QPSK-2048QAM RF Bandwidth: ........................1 MHz-54MHz Adaptive Modulation ...............11 steps with assignable traffic priority

System Management……………………………..Web Page, Command Line, SNMP

Interfaces All-Indoor or Split Systems: Traffic Interfaces .................... 1 10/100/1000Base-T RJ-45

.............................................. 2x 1000Base-X (SFP) Management Interfaces ......... 1x 10/100Base-T RJ-45, Serial SFP Types ............................ 1000Base-LX, 1000Base-SX ASI Interfaces……………………………..Up to 4ASI bidirectional Management ..........................RJ-45 (Ethernet)

Features Jumbo Frame Support ........... Up to 9600 Bytes QoS ....................................... Hierarchical QoS with up to 2K levels Encryption………………………………….256 bit AES Payload Encryption VLAN ..................................... 4K VLANS per C-VLAN Data Compression ................. Header Deduplication FIPS Compliance………………………...140-2

Frame Cut Through……………………..Reduces Latency for Video Appli-cations Misc ....................................... MSTP,ERP (ITU-T G.8032) .............................................. Ethernet OAM—EFM (IEEE 802.3ah) .............................................. CFM (IEEE 802.1ag)

Standards Metro Ethernet Forum .............Carrier Ethernet 2.0

Ethernet standards 10/100/1000base-T/X .............IEEE 802.3 Ethernet VLANs ......................IEEE802.3ac Virtual LAN ............................VLAN, IEEE 802.1Q Class of service ......................IEEE 802.1p Provider bridges ....................QinQ – IEEE 802.1ad Link aggregation .....................IEEE 802.3ad

Auto MDI/MDIX for 1000baseT IPv4 TOS ...............................RFC 1349 IPv4 DSCP ............................RFC 2474 IPv6 Traffic Classes ...............RFC 2460

Supported E1 Standards ITU-T G.703, G.736, G.775, G.823, G.824, G.828, ITU-T I.432, ETSI ETS 300 147, ETS 300 417

Standards Compliance EMC: ..................................... EN 301 489-4, EN 301 489-1, FCC 47 CFR, ............................................... part 15, class B Safety: .................................... EN 60950-1, IEC 60950-1, UL 60950-1,

............................................... CSA-C22.2 No.60950-1, EN 60950-22, ............................................... UL 60950-22, CSA C22.2.60950-22 Ingress Protection: ................ IEC 60529 IP56 Storage: ................................ ETSI EN 300 019-1-1 Class 1.2 Transportation: ...................... ETSI EN 300 019-1-2 Class 2.3

System Power Requirements Nulinx IP Compact Primary Voltage: . -48V (-40 to –60 VDC ext) Power Options…………………………………….Power over Ethernet or Direct Nulinx-PS Power Input: .................... 90-260VAC 50/60Hz

Environmental Temperature range Nulinx-IP Compact

Tested Continuous High Reliability Operation…-27°F to +131°F

Humidity: 5% RH to 100% RH

Physical Characteristics (unit)

Nulinx-IP Compact

Size ....................................... 9.05” (H), 9.07” (W), 3.86” (D) Weight .................................... 14.33 lbs. Mounting Pole Diameter……………..3.5-4.5”

Nulinx-IP Point-to-Point MIMO Hybrid IP/ASI microwave radio

25 MHz Channel Data Rate and Receiver Thresholds

Nulinx-IP Compact Covers all bands from 5.8 GHz through 38 GHz

Modulation Data Rate 6 GHz 7-10 GHz 11-15 GHz 18 GHz 23 GHz 24 UL GHz 26 GHz 28 GHz 31-38 GHz

QPSK 43 -87.5 -86.5 -86.0 -86.5 -85.5 -82.0 -85.5 -85.0 -84.0

8 PSK 65 -82.5 -82.0 -81.5 -82.0 -81.0 -77.5 -80.5 -80.5 -79.5

16 QAM 88 -80.5 -80.0 -79.5 -80.0 -79.0 -75.5 -78.5 -78.5 -77.5

32 QAM 117 -77.5 -77.0 -76.0 -77.0 -76.0 -72.5 -75.5 -75.5 -74.5

64 QAM 143 -74.5 -74.0 -73.5 -74.0 -73.0 -69.5 -72.5 -72.5 -71.5

128 QAM 173 -71.5 -71.0 -70.5 -71.0 -70.0 -66.5 -69.5 -69.5 -68.5

256 QAM 197 -68.5 -67.5 -67.0 -67.5 -67.0 -63.0 -66.5 -66.0 -65.5

512 QAM 217 -66.0 -65.0 -64.5 -65.0 -64.5 -60.5 -64.0 -63.5 -63.0

1024 QAM (Strong FEC) 231 -63.0 -62.5 -61.5 -62.5 -61.5 -58.0 -61.0 -61.0 -60.0

1024 QAM (Light FEC) 245 -62.5 -61.5 -61.0 -61.5 -61.0 -57.0 -60.5 -60.0 -59.5

2048 QAM 263

-58.5 -58.0 -57.0 -58.0 -57.0 -53.5 -56.5 -56.5 -55.5

30 MHz Channel Data Rate and Receiver Thresholds

Nulinx-IP Compact Covers all bands from 5.8 GHz through 38 GHz

Modulation Data Rate 6 GHz 7-10 GHz 11-15 GHz 18 GHz 23 GHz 24 UL GHz 26 GHz 28 GHz 31-38 GHz

QPSK 52 -87.5 -87.0 -86.0 -87.0 -86.0 -82.5 -85.5 -85.5 -85.0

8 PSK 76 -82.5 -81.5 -81.0 -81.5 -81.0 -77.0 -80.5 -80.0 -79.5

16 QAM 107 -81.0 -80.0 -79.5 -80.0 -79.0 -75.5 -79.0 -78.5 -78.0

32 QAM 140 -77.0 -76.5 -76.0 -76.5 -75.5 -72.0 -75.0 -75.0 -74.5

64 QAM 173 -74.5 -73.5 -73.0 -73.5 -72.5 -69.0 -72.5 -72.0 -71.5

128 QAM 208 -71.0 -70.5 -70.0 -70.5 -69.5 -66.0 -69.0 -69.0 -68.5

256 QAM 239 -68.0 -67.5 -67.0 -67.5 -66.5 -63.0 -66.0 -66.0 -65.5

512 QAM 255 -66.0 -65.5 -64.5 -65.5 -64.5 -61.0 -64.0 -64.0 -63.5

1024 QAM (Strong FEC) 278 -63.0 -62.0 -61.5 -62.0 -61.0 -57.5 -61.0 -60.5 -60.0

1024 QAM (Light FEC) 295 -62.0 -61.0 -60.5 -61.0 -60.5 -56.5 -60.0 -59.5 -59.0

2048 QAM 321 -58.0 -57.5 -56.5 -57.5 -56.5 -53.0 -56.0 -56.0 -55.5

Nulinx-IP 25 and 30 MHz Receiver Threshold Ta-

Nulinx-IP Compact Power Output Tables

Nulinx-IP Compact Power Output (dBm at output flange)

Modulation 6 GHz 7 GHz 8 GHz 10-11 GHz 13-15 GHz 18 GHz 23 GHz 24 GHz UL 26 GHz 28-38GHz

QPSK 25 25 25 23 24 22 20 0 21 18

8 PSK 25 25 25 23 24 22 20 0 21 18

16 QAM 25 24 24 23 23 21 20 0 20 17

32 QAM 24 23 23 22 22 20 20 0 19 16

64 QAM 24 23 23 22 22 20 20 0 19 16

128 QAM 24 23 23 22 22 20 20 0 19 16

256 QAM 24 23 21 22 20 20 18 0 17 14

512 QAM 22 21 21 21 20 18 18 0 17 14

1024 QAM 22 21 21 20 20 18 17 0 16 13

2048 QAM 20 19 19 18 18 16 16 0 15 12

Available Nulinx IP Compact Frequency Bands

6 Lower 5.85-6.45 GHz

6 Upper 6.4-7.125 GHz

7 7.1-7.9 GHz

8 7.7-8.5 GHz

11 10.7-11.7 GHz

15 14.4-15.35 GHz

18 17.7-19.7 GHz

23 21.2-23.65 GHz

24 (Unlicensed) 24.0-24.25 GHz

26 24.2-26.5 GHz

28 27.35-29.5 GHz

31 31 -31.5 GHz

38 37-40 GHz

Nulinx-IP Compact High Power Output Table

(dBm post branching)

Modulation 6 GHz 7 GHz 8 GHz 10-11 GHz

QPSK 28 28 28 26

8 PSK 28 28 28 26

16 QAM 28 27 27 26

32 QAM 27 26 26 25

64 QAM 27 26 26 25

128 QAM 27 26 26 25

256 QAM 27 26 24 25

512 QAM 25 24 24 24

1024 QAM 25 24 24 23

2048 QAM 23 22 22 21