Nuera Transport - Trailer Hitch Catalog
-
Upload
nuera-transport -
Category
Documents
-
view
257 -
download
5
description
Transcript of Nuera Transport - Trailer Hitch Catalog
HitchesHitches
TOWING TIPSHOW TO TOW SAFELY
Towing vehicle
What is the:
Make and model?
Model year?
Vehicle maximum towing capacity?
Trailer
What is the:
Type of trailer?
Gross trailer weight?
Tongue size?
2. DETERMINE THE TOWING WEIGHTS
The most important factors in choosing the correct towing
equipment is the gross trailer wight (GTW) and tongue weight
(TW).
1. ASK QUESTIONS:
For the trailer: Gross trailer weight is the weight of the trailer
completely loaded. To determine actual GTW, the trailer should
be placed on a vehicle scale. Select a similar trailer and find
the corresponding trailer length. The Gross Trailer Weight pro-
vided is a stock trailer. Adjust the chart weight accordingly to
the actual load.
Tongue weight (TW) is the downward force exerted on the
hitch ball by the trailer coupler. Usually, TW is 10% to 15% of
GTW. Tongue weight may be measured using a bathroom
scale, by resting the trailer coupler on the scale and placing the
scale on a box so the trailer is at normal towing height. Load
the trailer as if being towed.
For the tow vehicle: The vehicle’s maximum towing capacity
is determined by the manufacturer. This is found in the owner’s
manual.
3. SELECTING THE RIGHT HITCH
With the correct Gross Trailer Weight (GTW) and Vehicle
Towing Capacity, the correct trailer hitch can be selected.
Class I Hidden Hitch is designed for vehicles towing 2,000 lbs.
GTW or less, 200 lbs. TW. In some cases, Class I Hidden Hitch
may tow up to 2,500 lbs. GTW, 250 lbs. TW. A typical Class I
application is used for towing small utility trailers. Passenger
vehicles are most suited for Class I applications.
Class II Hidden Hitch is designed for vehicles towing 3,500
lbs. GTW, 300 lbs. TW. A typical Class II application is used for
towing large utility trailers, boats or campers. Sport utility vehi-
cles, minivans, large passenger cars, and mid-size pick-up
trucks are suited for Class II Hidden Hitches.
Class III & IV Hidden Hitch Receivers have the towing capac-
ity of up to 6,000 lbs. GTW or less, 600 lbs. TW. The towing
capacity may be increased to a maximum of 10,000 lbs. GTW,
1,000 lbs. TW using a weight distribution system. The GTW
and TW must conform to the vehicles maximum towing capaci-
ty. Refer to the vehicle owner’s manual. All pick-up trucks, full
size vans and sport utility vehicles may use a Class III receiver.
Class V Hidden Hitch MAGNUM Receivers have the towing
capacity of 8,000 GTW, 1,200 TW; 14,000 lbs. GTW, 1,700 lbs.
TW with weight distribution. The MAGNUM is designed for only
full-size pick-up trucks.
4. SELECTING THE PROPER ACCESSORIES
Once the correct trailer hitch is selected, towing accessories
complete the towing package. The following accessories are
required. Several types of each accessory are available.
Consult the noted page number for exact requirements.
1. Trailer ball - mounted on the drawbar or ball mount. The
ball size must match the trailer coupler size.
2. Drawbar/Ball mount - Hidden Hitch products have
removable ball mounts.
3. Trailer coupler - required on a trailer.
4. Electrical and wiring - all tow vehicles must be properly
wired.
5. Brake control - required when towing a trailer with electric
brakes.
6. Safety chains - required when towing.
7. Transmission oil coolers, a must for all automatic
transmissions.
HITCHING UP TIPS
Hitching a trailer to your tow vehicle is usually a one-man job,
but it is easier if someone helps.
Here are the basic steps:
1. Back your tow vehicle as close as possible to the trailer;
it’s easier and safer to do this than to pull the trailer to your
car or truck.
2. Release the coupler locking device.
3. Raise the front end of the trailer coupler directly over the
hitch ball; then lower it until it is seated on the hitch ball,
covering it completely.
4. Check under the coupling to ensure the ball clamp is
below the ball and not riding on top of it.
5. Latch the coupler to the hitch ball. Make sure it’s locked in
place by lifting up the trailer tongue. If the coupler comes
loose from the ball, unlatch it and go back to Step 3.
6. Make sure your jack is fully raised.
7. If you have a weight-distributing hitch with spring bars,
follow the above procedure, then attach the spring bar
chain to the trailer and tighten it until your trailer and car
are in a normal level position.
8. If your trailer has a surge brake, breakaway cable, or
chain, attach the cable or chain to your tow vehicle,
allowing enough slack for you to make tight turns.
9. Attach the safety chains and criss-cross them under the
ball mount to ensure they do not drag.
10. Connect the trailer wiring harness to the lighting system of
your tow vehicle and check its operation (see the ‘Pre-Trip
Checklist’).
280
Hitches
281
HitchesHitches
SAFETY TIPS
Trailering Tactics: With a trailer in tow, you’re operating a
vehicle combination that’s longer, heavier and sometimes wider
and taller than you’re used to. So you’ll have to make some
compensating adjustments in your driving practices.
Take a ‘Shakedown Cruise’: At least one short trial run before
your first trip will help familiarize you with your trailer’s operat-
ing characteristics. It will also let you know that the lights,
brakes, hitch, etc., are working properly.
Slow Down: Moderate to slow speeds put less strain on your
car and trailer.
Allow Extra Time and Space: You’ll need both when passing
and stopping, especially if your trailer has no brakes.
Check Rear View Mirrors: Doing this frequently will let you
know that your trailer is riding properly. We recommend outside
rear view mirrors on both sides on your tow vehicle.
Swing Wider: You need to make wider swings at curves and
corners because your trailer’s wheels are closer to the inside of
a turn than the wheels of your car or truck.
Pass with Extra Care: It takes more time and distance to get
around a slower vehicle and return to the right lane when you’ve
got a trailer in tow.
Watch the Wind: To avoid swaying, be prepared for sudden
changes in air pressure and wind buffeting when larger vehicles
pass from eight direction. Slow down a bit and keep a firm hold
on your steering wheel. Aim straight down your lane.
Conserve Fuel: You’ll go farther on a tank of gas at moderate
speeds. Higher speeds increase wind resistance against the
trailer and reduce your gas mileage significantly.
Avoid Sudden Stops and Starts: This can cause skidding,
sliding, or jackknifing, even if your trailer has brakes. Avoid
quick stops while turning. Smooth, gradual starts and stops will
TOWING TIPS
improve your gas mileage.
Signal Your Intentions: Let surrounding vehicles know what
you intend to do well before you stop, turn, change lanes, or
pass.
Shift to a Lower Gear: A lower gear will help ease the load on
the transmission and engine when going over steep hills, sand,
gravel or dirt roads. If your tow vehicle has an ‘overdrive’ gear,
shifting out of overdrive to a lower gear may improve your gas
mileage.
Always be Courteous: Make it as easy as possible for faster-
moving vehicles to pass you. Keep to the right of the road and
prepare to slow down if passing vehicles need extra time to
return to their proper lane.
Don’t Tailgate: Allow at least one car and trailer length
between you and the vehicle in front for each 10 mph on your
speedometer.
If a Problem Occurs: Don’t panic. Stay cool. Say you expe-
rience a sudden bumping or fishtailing. It may indicate a flat
tire. Don’t jam on the brakes or mash the accelerator in an
attempt to drive out of it. Instead, come to a stop slowly as you
keep driving in as straight a line as possible. If conditions per-
mit, coast to a very slow speed and try to avoid braking, except
when your wheels are straight and your trailer and tow vehicle
are in line with each other. If your trailer begins to fishtail as you
accelerate to highway speed, back off the accelerator a bit.
This should stop the fishtailing. If it begins again as your
increase speed, stop and check your load. It probably isn’t dis-
tributed evenly from side to side, or it’s too far back to put a suf-
ficient load on the hitch ball. It is recommended that about 10%
of the trailer load be on the hitch. Redistribute the load as nec-
essary before continuing.
Hitch
es
282
HitchesHitches
B&W TURNOVER BALL PLATES
Part # Description Mfg #16-575 99-07 GM 1/2 & 3/4 Ton Light Duty Pickup (new body) 1059
16-575-1 07-10 GM 1/2 Ton w/ 4” Frm (New Body) 1057R
16-575-2 07-10 GM 1/2 Ton w/ 5 1/2” Frm (New Body) 1007
16-576-1 01-10 GM 3/4 Ton (HD) Long Bed & Short Bed 1067
16-577 01-07 GM 1 Ton HD Pickup (new body) 1062
16-176-1 07-09 GM 1 Ton (New Body) 1067R
16-578 88-98 GM 1/2 - 1 Ton HD (long bed) 1000
16-578-R Rail Mounting Kit Only (for 16-578) 1000R
16-579 88-98 GM 1/2 - 1 Ton (short bed) 1050
16-579 99-03 GM 1/2 - 1 Ton (old body style) 1050
16-571 97-03 Ford 1/2 & LD 3/4 Ton (new body / no air bags) 1197
16-570-05 99-06 Ford HD 3/4 & 1 Ton SD Pickup 1105
16-571-1 04-06 Ford 1/2 - 3/4 Ton LD (new body) 1104
16-572 80-96 Ford 3/4 - 1 Ton w/Overloads 1110
16-572 97-98 Ford 3/4 - 1 Ton w/Overloads (old body) 1110
16-573 80-98 Ford 3/4 - 1 Ton w/o Overloads 1100
16-574 80-96 Ford 1/2 Ton 1150
16-580 94-01 Dodge 1/2 Ton Pickup 1394
16-580 94-02 Dodge 3/4 & 1 Ton Pickup 1394
16-580-R Rail Kit Only (for 16-580) 1394R
16-581-1 03-10 Dodge 3/4 - 1T Long & Short Bed & Mega Cab 1306R
16-582 73-93 Dodge 1/2, 3/4 & 1 Ton (requires drilling) 1300
16-583 02-05 Dodge 1/2 Ton (long & short bed) 160310
16-583-1 02-08 Dodge 1/2 Ton Long Bed & Short Bed 1316R
16-583-2 09-10 Dodge 1/2 Ton All Beds 1309
16-598 04-06 Nissan Titan 1204
16-584 00-06 Toyota Tundra 1251
16-584-1 07-10 Toyota Tundra 1257
16-596 B&W Flatbed Kit 1500
Replacement Balls
16-590 B&W Replacement Balls 2000
16-592 B&W Hi-Rise Balls 2050
Part # Description Mfg. #
16-588 B&W Inverted Ball 4025
16-589 B&W King Pin Adapter 4000
16-594 B&W Gooseneck Eyelet 4075
16-593 B&W Gooseneck Ball Extender 4085
Part # Description Mfg. #
16-585 B&W Fifth Wheel Companion 3000
16-586 B&W Fifth Wheel Companion - Flat Beds RVK 3050
16-599 B&W Ball Corner Plate 1700
16-595 B&W Bolt Kit For Safety Chains 1600
Replacement BallsAvailable
Hitch
es
283
HitchesHitches
5TH WHEEL HITCH
Part # Description Mfg. #
28-702 15K Pro Eagle Fifth Wheel 50005
28-701-H Universal Rail Kit (except ‘02-’03 Dodge) 50035
64-30033 20K Select Series - Needs Installation Kit 64-30035
64-30035 Universal Select Series- For Use with All Except Signature Series
64-30047 16K Select Series - Needs Installation Kit 64-30035
64-30048 Kwik-Slider for 15 & 16K Select Series 30048
64-30049 15K with Slider - Needs Installation Kit 64-30035 30049
64-30051 16 with Slider - Needs Installation Kit 64-30035 30051
64-30054 30K Low Profile Fifth Wheel 30054
64-30056 15K Pro Series - Includes Insallation Kit 64-30035 30056
64-30058 18K Signature Series - Needs Slider Kit 64-30070 30058
64-30059 24K Signature Series 30059
64-30076 15K Pro-Series with Kwik-Slide 30076
64-30084 20K Select Plus with Kwik Slide 30084
64-6022 22K Fifth Wheel - Needs Installation Kit 64-30035 6022
64-49080 Pro Series Gooseneck 49080
Features & Benefits
- 4 height adjustments
-pivoting head
-includes rails and install kit
- fits most full size pick-ups
Part # Description Mfg. #
28-700 Pro-Eagle 5th Wheel 15K - Quality S 281570
28-701 Bed Rails & Bolt Kit for 18-700 281575
28-701-H Universal Rail Kit 281579
28-709 16K Round Tube Slider W. 50516
Part # Description Mfg. #
19-720 Fifth Wheel Trailer Adapter 3100
Designed so you can convert your fifth wheel trailer from a 2” king pin to a 2 5/16” ball
allowing you to use one hitch to pull both trailers (gooseneck or fifth wheel).
Hitch
es
B&W TURNOVER BALL PLATES
284
HitchesHitches
Part # Description Mfg. #
16-596 Flatbed B&W GNRK-1500
16-586 Fifth-Wheel Companion for Flatbed Trucks RVK-3050
FLATBED BALL PLATES
WALLACE FORGE FOLDING BALL PLATE
The Wallace Forge folding ball plate comes equipped with safety chain tie downs and a sec-
ondary spring loaded pin for added security. 25,000 lbs. weight rating - 12” x 14”
Part # Description Mfg. #
16-511 Wallace Forge Folding Ball Plates 2025161
16-512 Mounting Kits (fits Wallace, Atwood, or Buyers) 2026666
ATWOOD FOLDING BALL PLATE
Part # Description Mfg. #
16-400 Atwood Folding Ball Plate w/ 2 5/16” Ball 75064
16-410 Installation Kit (80-00 Ford & 94-00 Dodge) 73060
16-411 Installation Kit (88-99 GM - old body style) 73062
Heavy Gauge Steel: provides a rugged and durable design - 25,000 lbs. Capacity.
Minimal Hole Requirement: an 8 1/2 x 11 1/2" hole is all that’s needed in the truck bed.
All other attachments are hidden from view.
No Tools Required: to fold down the hitch ball when not in use or to reposition it for coupling.
BUYERS FOLDING BALL PLATE
A 360° locking collar secures the 2-5/16" towing ball when in the open position.
When in the closed position, the towing ball folds away and the locking collar secures down flat. -
25,000 lbs. capacity.
Part # Description Mfg. #
16-510 Buyers Folding Ball Plate w/ 2 5/16” Chrome Ball G9003
16-510-1 Buyers Products U-Bolt Kit (for safety chains) BRB03
Hitch
es
285
HitchesHitches
BALL PLATES
Part # Description Mfg. #
16-350-D 13” X 42” Ball Plate w/ 2 5/16” Ball (1” High Rise) 15300
- 2-5/16" towing ball, 3/8" steel plate construction
- Capacity: 25,000 lbs. M.G.T.W.
- 5/8” D-Rings welded on plate
RECEIVER TUBES
Other lengths available for special order
Part # Description Mfg. #
28-101 Step Bumper Hitch Box - Bolt On SBH2
Attaching hardware is included.
Part # Description Mfg. #
28-100-2 2” x 6” Receiver Tube RT25806
28-64-3006 1 1/4” x 6” Receiver Tube RT1251206
28-100-10 2” x 10” Receiver Tube RT25810
28-100-1 2” x 12” Receiver Tube RT25812
28-100-3 2” x 18” Receiver Tube RT25818
28-100-4 2” x 24” Receiver Tube RT25824
28-100-5 2” x 36” Receiver Tube RT25836
Part # Description Mfg. #
28-100-6 2” Square Receiver Tube - Bolt On 1804055
Part # Description Mfg. #
64-6300 Removable Gooseneck 2 5/16” 6300
Hitch
es
286
HitchesHitches
ADAPTERS & EXTENSIONS
Part # Description Mfg. #
0000-28-020 Receiver Tube Adapter 1 1/4” x 2 “ 80304
0000-28-021 Receiver Tube Adapter 2-1 1/4” 80301
28-120 Reducer Sleeve 2 1/2” - 2” 58102
000-28-016 Extension 14” HH 80305
000-28-023 Receiver Adapter 2” - 1 1/4” 70181
000-28-024 Receiver Adapter 1 1/4” - 2 “ 80303
HITCH DROP BARS / BALL MOUNTS
Part # A B C D E F Load Mfg. #
28-106 7 1/4” 2” 3/4” 5/8” 1” n/a 6000# 80227
28-106-1 7 1/4” 1 1/4” 5/8” 1/2” 3/4” n/a 3500# 36051
28-112 11 1/4” 2” 3/4” 5/8” 1” n/a 6000# 80226
28-107 8 1/8” 4” 2 3/4” 5/8” 1” 2 7/8” 6000# 80239
28-107-1 8 3/8” 3 1/2” 2 7/8” 1/2” 3/4” n/a 2000# D-21
28-113 10 1/8” 4” 2 3/4” 5/8” 1” 5 5/8” 6000# 30007
28-114 10” 10” 83/4” 5/8” 1” 5000# 80218
28-114-1 9 1/8” 6” 4 3/4” 5/8” 1” 5 1/2” 5000# 80240
28-115 10 1/2” 8” 6 3/4” 5/8” 1” 3 1/4” 5000# 1803017
28-106-3 9 1/4” 6000# 1803005
Solid Bar Stock
28-106-S 7 1/4” 2” 3/4” 5/8” 11/4” n/a 10000# 80142
28-107-S 8 1/8” 4” 2 3/4” 5/8” 11/4” 2 7/8” 10000# 80143
28-114-S 9 1/8” 6” 4 3/4” 5/8” 11/4” 5 1/2” 10000# 54
28-106-S 2” 8” 12000# 80142
28-107-S 4” 8.5” 12000# 80143
28-80122 2” 8” 10000#
28-114-1 6” 9” 10000# 80240
28-80227 2” 12” 6000#
0000-28-028 4” 12” 6000#
28-80240 6” 9” 6000#
Other Ball Mounts
Available Upon Request
Hitch
es
287
HitchesHitches
Part # Description Mfg. #
28-116 Adjustable Ball Mount (1” hole, 8,000 lbs capacity) 861090
28-116-BP Ball Plate Only (for drop bar 28-116 - above item) 3000679
28-80412 Adjustable Ball Mount 12” (6,000 lbs capacity)
10” Bar Length.
HITCH DROP BARS / BALL MOUNTS
Part # Description Mfg. #
28-114-A 10” Drop Alumistinger Hitch (Solid Bar Aluminum Super Alloy) 3511
28-115-A 8” Drop Alumistinger Hitch (Solid Bar Aluminum Super Alloy) 3509
28-107-A 4” Drop Alumistinger Hitch (Solid Bar Aluminum Super Alloy) 3505
28-106-A 2” Drop Alumistinger Hitch (Solid Bar Aluminum Super Alloy) 3503
Part # Description Mfg. #
64-4280 10K - 1 1/4” Hole - 1” Rise - 2” Drop - 8 1/2 “ Length 4280
64-4281 10K - 1 1/4” Hole - 3” Rise - 4” Drop - 8 1/2 “ Length 4281
64-4282 10K - 1 1/4” Hole - 5” Rise - 6” Drop - 9 1/2 “ Length 4282
64-4283 10K - 1 1/4” Hole - 7” Rise - 8” Drop - 9 1/2 “ Length 4283
64-2953 5K - 1” Hole - 2 3/4” Rise - 4” Drop - 8” Length 2953
64-40344 5K - 1” Hole - 2 3/4” Rise - 4” Drop - 9 “ Length 40344
64-40346 5K - 1” Hole - 4 3/4” Rise - 6” Drop - 9 1/2“ Length 40346
64-40342 5K - 1” Hole - 3/4” Rise - 2” Drop - 8 1/2“ Length 40342
64-5761 5K Clevis 3/4” Hole - 9 3/4 “ Length 5761
64-5762 5K Clevis 1” Hole - 8 7/8 “ Length 5762
HITCH DROP BARS / BALL KIT DRAWBAR
Part # Description Mfg. #
28-106-1-P 2K - 3/4” Hole - 1 1/4” Drop - 9” Length
28-107-2-P 2K - 3/4” Hole - 4” Drop - 9 1/2” Length
28-60-352 2K - 3/4” Hole - 2” Drop - 9” Length 60-352
Hitch
es
288
HitchesHitches
Part # Description Mfg. #
64-6580 Adjustable Ball Mount 6580
Part # Description Mfg. #
15-530 Multi Ball Hitch Bar (3 Balls) (Refer to Appendiix) 1802200
15-531 Multi Ball Hitch Bar (3 Balls) - Chrome 1802205
15-532 Multi Ball Hitch Bar (2 Balls) - 1 7/8” (6K) & 2” (10K) 1802210
28-117 Multi Ball Hitch Bar (3 Balls) - 10K 31004
07-28-002 Double Tow Plate for 30062 (2 & 2 5/16 balls) PU 30064
28-31001 1 7/8" & 2" Double Tow 2k-3.5k PU 31001
28-80405 Double Ball 1 7/8” & 2” HI 80405
15-533 Double Ball Mt 2” & 2 5/16” HI 80406
28-DT-LBM8200 Aluminum 2” Drop Self Locking LMB8200
28-DT-LBM8400 Aluminum 4” Drop Self Locking LMB8400
28-140 Multi Hitch Bar (3 Balls) 1802225
All Buyers' multi-ball mounts feature a solid shank for 2" receiver tubes, welded steel towing
balls, black powder coat finish, a 5/8" hitch pin hole. Offers three ball sizes (1 7/8”, 2” and 2 5/16”) all
on one solid bar.
HITCH DROP BARS / BALL MOUNTS
Part # Description Mfg. #
28-110 8 Hole Adjustable Pintle Mount (Refer to Appendix) PM-87
28-111 14 Hole Adjustable Pintle Mount (Refer to Appendix) PM-812
17-RE6504 2 Hole Adjustable Pintle Mount WF RE6504
PINTLE HOOK MOUNTS
Part # Description Mfg. #
28-100-2 Rec. Tube 2" X 6" RT25806
28-100-1 REC. Tube 2" X 12 RT25812
28-100-4 REC. Tube 2" X 24 RT25824
28-80812 12" Receiver Tube
28-80818 18" Receiver Tube
28-80824 24" Receiver Tube
28-80836 36" Receiver Tube
3/4” Ball Hole - 5/8” Safety Pin Hole
Hitch
es
289
HitchesHitches
Part # Description Mfg. #
28-600 Weight Distribution Hitch 10K QS1000A
28-601-2 Steel Drop Bar Only, 12” Shank - 7” Drop (14K) 40234
Part # Description Mfg. #
28-610 Friction Sway Control Kit 28400
28-611 1/4" Chrome Treaded Ball for Sway Control (car end) 3015705
28-612 Trailer Tongue Ball for Sway Control 3015704
Part # Description Mfg. #
64-3400 Sway Control 3400
WEIGHT DISTRIBUTING HITCH
SWAY CONTROL
Benefits of Weight Distributing
• level load • better braking • better handling • less strain on vehicle
• greater towing capacity
600 / 12,000 lbs. Towing Capacity
PROVIDES CONSTANT SWAY REDUCTION FROM WINDY CONDITIONS AND
PASSING VEHICLES. 28-610 includes Sway Control Unit, Trailer-Mounted Ball & Hardware,
Weld-On Tab, Hitch-Mounted Ball, Mount Reinforcement Plate, Attachment Clips, Black Powder
Coat Finish, Retail Packaging.
Part # Description Mfg. #
28-600-H Weight Distribution Hitch - Trunion 7903
28-601-1 HH STD Drop Bar for Adj. 3210
28-602-2 Trunion Head - 1K 5008
28-603 Snap Up Bracket w/ Bolt & Clip 6636
Part # Description Mfg. #
64-7901-10 Weight Distribution Hitch - 600 lbs. -12K 38626
64-7902-10 Weight Distribution Hitch - 800 lbs. -12K 38627
64-7903-10 Weight Distribution Hitch - 1200 lbs. -12K 7903-10
Hitch
es
290
HitchesHitches
LOCKING HITCH PINS
Part # Description Mfg. #
28-511-P 5/8” Hitch Pin - Locking 17023
28-BLPH200 5/8" Diameter Pin For 2" Receivers BYBLPH200
28-TK225 5/8" pin fits all Class III, IV and V receiver hitches TR TK225
00-28-248 Lock Dogbone - receiver 5/8” 63219
28-BLHP125 Receiver lock 1/2” - receiver 1/2” 90-085
00-28-247 Receiver lock 5/8” - receiver 5/8” 90-088
HITCH BOX COVER
Part # Description Mfg. #
0000-28-080 1 7/8 - 2” Ball Cover 42250-12
28-5451000 Hitch Ball Covers 1 7/8” - 2” 5451000
0000-28-081 2 5/16” Ball Cover 42251-12
BALL COVERS
HITCH PINS & CLIPS
Part # Item # Description Mfg. #28-108-C A & B 5/8” Hitch Pin 1700228-108-1C A & B 1/2” Hitch Pin 1700528-109 Keeper Clip for Hitch Pin - “Hair Pin” 1700607-08-003 C 1/4 Linch Pin BY 6600008-66006 C 5/16 Linch Pin BY 6600608-66015 C 7/16 Linch Pin BY 6601528-66101 D 1/2 X 4 Hitch Pin/Hair BY 6610118-642 D 5/8 X4 Hitch Pin/Hair BY 6610728-66111 D 3/4 X 4.5 Hitch Pin/Hair BY 66111
Solid steel, zinc-plated with safety clip to secure all ball mounts to receiver-style hitches.
Part # Description Mfg. #
64-2211 Plastic Hitch Box Cover - 1 1/4” 2211
64-1944 Plastic Hitch Box Cover - 2” 1944
64-1202 Plastic Hitch Box Cover - 2” 1202-24
64-5351 Metal Hitch Box Cover - 1 1/4” 5351
64-5352 Metal Hitch Box Cover - 2” 5352
Part # Description Mfg. #
28-950-P Hair Pin Clip 1/8” x 2 1/4”
28-951-P Hair Pin Clip 5/32” x 3”
28-952-P Hair Pin Clip 3/16” x 3 1/2”
28-953-P Hair Pin Clip 1/4” x 4”
Hitch
es
291
HitchesHitches
TRAILER BALLS
Part # Size Dia. Length Finish Capacity Mfg. #15-100 1 7/8” 3/4” Ext. 1 3/4” Chrome 2,000 lbs. 15-98001 1 7/8" 3/4" - Raw 2,000 lbs.15-101-I 1 7/8” 1” 2 1/4” Chrome 2,000 lbs.15-100-IT 1 7/8” 3/4” Int. 1 3/4” Chrome 2,000 lbs. 15-200 2” 3/4” 2 1/8” Chrome 3,000 lbs.15-96006 2" 1" 1" Chrome 3,500 lbs.15-99018 2" 1-3/8 " 2-1/4" Chrome 3,500 lbs.15-200-2 2" 3/4" 3" Raw 3,500 lbs.15-101 1 7/8” 1” 2 1/4” Chrome 5,000 lbs.15-201 2” 1” 2 1/4” Raw 5,000 lbs.15-202 2” 1” 2 1/4” Chrome 5,000 lbs.15-202-L 2" 1" 3" Chrome 5,000 lbs.15-202-I 2” 1” 2 1/4” Chrome 5,000 lbs.15-304-I 2 5/16” 1” 2 1/8” Chrome 5,000 lbs.15-300 2 5/16” 1” 2” Raw 6,000 lbs.15-304 2 5/16” 1” 2 1/8” Chrome 7,500 lbs.15-204 2” 1 1/4” 2 1/4” Zinc 8,000 lbs.15-204 2" 1-1/4 2 1/4 Raw 8,000 lbs.15-210 2” 1 3/8” 8,000 lbs.15-310 2 5/16” 1 1/4” 2 1/4” Raw 10,000 lbs.15-305 2 5/16” 1 1/4” 2 1/8” Chrome 10,000 lbs.15-1802007 2” 1” 2-3/4” Chrome 10,000 lbs.15-305-I 2 5/16” 1 1/4” 2 1/8” Chrome 10,000 lbs.15-340 2 5/16” 1 1/4” 2 1/8” Raw 30,000 lbs.15-400 3” 2” 3 1/4” Raw 30,000 lbs.15-98026 3" 1-2” 2-1/4" Zinc 30,000 lbs.15-350-P 2 5/16” 1 3/8” 30,000 lbs.15-307 2 5/16” 1 3/8” 40,000 lbs.15-200-IT 2” 3/4” Internal Thread
BULLDOG TRAILER BALLS
Part # Size Dia. Length Finish Capacity Mfg. #15-412 2” 1” 2 1/8” Raw 5,000 lbs. 2835115-415 2” 1” 2 1/8” Raw 7,000 lbs. 2835215-411 2 5/16” 1 1/4” 2 3/4” Raw 12,500 lbs. 28400
HammerBlow Hitch Balls are precision machined from high strength steel bars. The recom-
mended hitch ball for BULLDOG couplers, each HammerBlow Hitch Ball is carefully shaped for
years of reliable service.
Hitch
es
292
HitchesHitches
Capacity: 2,400 lbs. maximum vertical load,12,000 lbs. M.G.T.W.
Description: Single piece drop forged lower jaw.
Drawbar Eye Dimensions: 2-1/2" to 3" up to 1-9/16 cross section.
Part # Description Mfg. #
17-211 2” Ball / Pintle Hook Combo (12K rating) RM62000
17-221 2 5/16” Ball / Pintle Hook Combo (12K rating) RM62516
Part # Description Capacity Mfg. #
17-PH30 A- Versatile, 2” to 3” ID with 1.25 Diameter 30k PH3017-PHT60AL B- Versatile, 2” to 3” ID with 1.25 Diameter 10k H3 PHT60AL
RIGID PINTLE HOOKS
HI-RISE TRAILER BALLS
Part # Size Dia. Length Finish Capacity Hi-Rise Mfg. #15-351 2 5/16” 1 3/8” 3 1/4” Raw 30,000 lbs. 1” FG/#5F15-365 2 5/16” 1 1/2” 2 3/4” Raw 30,000 lbs. 2” 180206115-380-C 2" Collar Raw 94012
ADAPT-A-BALL
Part # Description Mfg. #
15-560 Adapt-a-Ball
Extra Long Shank w/ 1 7/8”, 2” & 2 5/16” Chrome Balls 57908
15-570-P Adapt-a-Ball w/1 7/8”, 2” & 3/4” 15-575-P Adapt-a-Ball w/1 7/8”, 2” & 1” 89-2867DATSC Adapt-a-Ball w/1 7/8”, 2 5/16” & 1”
All balls rated at 8,000 lbs. Replacement balls in stock too.
CONVERSION BUSHING
Part # Description Mfg. #
15-515 Conversion Bushing (1” to 3/4”) 1802097
15-516 Conversion Bushing (1 1/4” to 1”) 80106
Used with a ball mount to fit a 3/4” shanked ball in a 1” hole.
Hitch
es
293
HitchesHitches
Part # A B C E Shank Capacity Ball Mfg. #
17-210 3 3/8” 13/4” 1/2” 4 3/16” 1 1/8” Hook - 16K 2” BH82000
Ball - 10K
17-220 3 3/8” 13/4” 1/2” 4” 1 1/8” Hook - 16K 2 5/16” BH82516
Ball - 10K
Replacement Parts
15-410 1 7/8” Replacement Balls RB1780
15-413 2” Replacement Ball (for 17-210 shown above) RB2000
15-414 2 5/16” Replacement Ball (for 17-220 shown above) RB2516
17-225 Clip w/Chain P11C
17-205 Mounting Hardware (4 bolts, 4 nuts, 4 washers - grade 8) 8520
Capacity: 3,000 lbs. maximum vertical load,16,000 lbs. M.G.T.W.
Description: Drop forged combination pintle hook/ball hitch. Forged steel ball.
Interchangeable hitch balls.
Drawbar Eye Dimensions: 2-1/2" to 3" up to 1-9/16 cross section.
Note: A & B measure-ments are center of hole
to center of hole
A
B
E
SC Hole Size
Part # Description Capacity Mfg. #
17-202 Pintle Hook 2” x 3” 40k PH20
17-201 Pintle Hook 2 3/8” x 3” 90k PH45
17-201-A Pintle Hook 2 3/8” x 2 5/8” 90k 20-388
17-201-AC Brake Chamber for 17-201-A 20-389
RIGID PINTLE HOOKS
Part # A B C E Shank Capacity Ball Mfg. #
17-200 3 3/8” 13/4” 1/2” n/a n/a 30K n/a Refer to Appendix) PH-15
17-203 3 3/8” 13/4” 1/2” n/a n/a 10K n/a Refer to Appendix) PH-5
17-205 Mounting Hardware (4 bolts, 4 nuts, 4 washers - grade 8) 8520
Capacity: 6,000 lbs. maximum vertical load, 30,000 lbs. M.G.T.W.
Description: Drop forged alloy steel rigid type pintle hook.
Drawbar Eye Dimensions: 2" to 3" I.D. with 1-1/4" to 1-5/8" diameter section
A
B C Hole Size
COMBO HITCHES & REPLACEMENT BALLS
Part # Description Capacity Ball Mfg. #
17-BH102516 A- 10-Ton Combo 20K 2.5” BY BH10251617-220 C- Pintle Hook 12K 2 5/16” HI 4302217-PH16B D- Duplex 19k 2" H3 PH16B17-PH16BA D- Duplex 19k 2 5/16” DH3 PH16BA17-RB102000 E-10 Ton Rplcmt. Ball BY RB102000
28-63826 E- 2” x 1” Chrome Ball 6K 2” HI 19247
28-63018 E- Rplcmt. Ball 2” HI 43027
28-63019 E- Rplcmt.Ball 2 5/16” 43028
Hitch
es
294
HitchesHitches
Part # Description Mfg. #
21-301 3” Pintle Ring Assembly 12K (Refer to Appendix) B16137
21-301-HD Pintle Ring Assembly 20K Adj. W 909330
Part # Description Mfg. #
21-304 4-Hole Leveler Channel (Refer to Appendix) 8978
21-430 6-Hole Leveler Channel w/Gussets B8979
21-430-1 6 Hole Leveler Channel w/o Gussets B89791
For Use with 3” adjustable pintle (p/n 21-301).
PINTLE RINGS
AIR CUSHIONED PINTLE HOOKS
Part # Description Capacity Mfg. #
17-PH210RA11 A-Pintle Hook & Chamber Assembly 90k H3 PH210RA1117-PH210NA11 A- Pintle Hook Only 90k H3 PH210NA1117-PH300 B- Pintle Hook & Chamber Assembly 72k H3 PH30017-PH310RN11 B- Pintle Hook Only 72k H3 PH300-117-XA-02608 A,B,C- Air Chamber 90k-100k H3 XA-02608
SWIVEL PINTLE HOOKS
Part # Description Capacity Mfg. #
17-PHT60A0SL8 A-Swivel Type 18k H3 PHT60AOSL817-PHT90A B- Swivel Pintle (Light Duty) 20k H3 PHT90A17-PH-30SA41 B- Swivel Pintle (Heavy Duty) 20k H3 PHT100A17-PH760 C- Swivel Pintle 49k H3 PH760
Part # Description Mfg. #
32-155 Aluminum drawbar lock fits 2-1/2” and 3” eye sizes. TL-60
Padlock not included.
PINTLE HOOK LOCK
Hitch
es
295
HitchesHitches
PINTLE RINGS
Part # Description Mfg. #
17-110 Wallace Forge Weld-on Pintle Ring 2065130
17-110-1 Buyers Weld-on Pintle Ring (Refer to Appendix) LW10
Capacity: 1,000 lbs. maximum vertical load 10,000 lbs. M.G.T.W.
Description: C1020 steel forged drawbar, 2.5" I.D. ring.
Part # Description Mfg. #
17-111 4 Bolt Pintle Ring (17 TON) (Refer to Appendix) 170015
- 2 1/2 “ I.D. Eye w/ 1 1/4” Diameter Section
- 7,000 lbs Max. Vertical Load (tongue)
- 35,000 lbs. Max Gross Trailer Weight
- When used for hinged tongue trailer application where max vertical load cannot exceed
500 lbs., and the max gross trailer weight is 50,000 lbs.
Part # Description Mfg. #
17-112 Lunette Eye Pintle Ring (Refer to Appendix) 170025
Part # Description Mfg. #
98-90-012 Adjustable 20K Pintle Ring - 4 K Vertical 2 1/2” Eye, 5 1/2” Ext. Dia. 17-111-5 Adjustable 22K Pintle Ring - 4.5 K Vertical Load, 3” Eye, 6 1/4” Ext. Dia.
- Draw Bar w/ Washer, Nut, & Cotter Pin
- 3“ I.D. Eye w/ 1 5/8” Diameter Section
- 2” O.D. Shank
- 9,000 lbs. Max. Vertical Load (tongue)
- 45,000 lbs. Max. Gross Trailer Weight
- When used for hinged tongue trailer application where max vertical load cannot exceed
500 lbs., and the max gross trailer weight is 85,000 lbs.
Part # Description Mfg. #
17-111-1 4 Bolt Pintle Ring (30 TON) (Refer to Appendix) 170020
- 3.00“ I.D. Eye w/ 1 5/8” Diameter Section
- 15,000 lbs Max. Vertical Load (tongue)
- 60,000 lbs. Max Gross Trailer Weight
Part # Description Mfg. #
21-303 Hitch Bolts w/ Nuts (Titan Brand) 909310405
21-303-1 Hitch Bolts w/ Nuts 13321
Coupler head and pintle ring require 2 bolts for attachments
Hitch
es
296
HitchesHitches
EYE RING
Part # Description Mfg. #
17-LW847 1 5/8” Lunette Eye RIng BY LW847
TOW HOOKS
Part # Description Mfg. #
34-B2801A Tow Hook / Pair - 3 Hole Hook BY B2801A
TOW SHACKLES
Part # Description Mfg. #
17-TH-0681 Tow Shackle H3 TH-0681
17-TH850 Tow Shackle H3 TH850
Part # Item # Description Capacity Mfg. #
17-H3PHT60AOSL8 A Swivel Type 18k H3 PHT60AOSL817-PHT90A B Swivel Pintle (Light Duty) 20k H3 PHT90A17-PHT100A B Swivel Pintle (Heavy Duty) 20k H3 PHT100A17-PH760 C Swivel Pintle 49k H3 PH76017-DB1249-49 C 3” Rigid Mount Bolt-on Eye-17” lenth45k H3 DB1249-4917-DB-100FQ1 D 3” Bolt-on Eye 100k H3 DB-100FQ121-301-3K E 3” Adjustable Eye Assembly BY B1812817-DB-1422 H A-frame Weld-on 90k H3 DB-142217-DB1228-1 K Rectangular shank/plate 20k H3 DB1228-117-DB1238 K Rectangular shank/plate 22k H3 DB1238
PINTLE RINGS
Part # Description Mfg. #
17-100 Rigid Mount Pintle Ring (7 TON) (Refer to Appendix) DB-1250-3
- Draw Bar w/ Washer, Nut, & Cotter Pin
- 2 1/2” I.D. Eye w/ 1 1/2” x 1 1/4” Oval Section
- 3,000 lbs. Max. Vertical Load (tongue)
15,000 lbs. Max. Gross Trailer Weight
- When used for hinged tongue trailer application where max vertical load cannot exceed
500 lbs., and the max gross trailer weight is 50,000 lbs.
Hitch
es