NTC Thermistors - Farnell element14 · Cat.No.R44E-9 Murata Manufacturing Co., Ltd. NTC Thermistors...
Transcript of NTC Thermistors - Farnell element14 · Cat.No.R44E-9 Murata Manufacturing Co., Ltd. NTC Thermistors...
Cat.No.R44E-9
MurataManufacturing Co., Ltd.
NTC Thermistors
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
1
2
3
4
5
6
7
Part Numbering 2
Basic Characteristics 5
for Temperature Compensation 0201 (0603) Size 6
for Temperature Compensation 0402 (1005) Size 8
for Temperature Compensation 0603 (1608) Size 10
for Temperature Compensation 0805 (2012) Size 12
for Temperature Compensation Temperature Characteristics (Center Value) 14
Chip Type !Caution/Notice 17
Chip Type Package 20
for Temperature Sensor Lead Type 23
for Temperature Sensor Lead Insulation Type 24
for Temperature Sensor Temperature Characteristics (Center Value) 26
for Temperature Sensor Lead Type/Lead Insulation Type !Caution/Notice 27
for Temperature Sensor Lead Type/Lead Insulation Type NTSA/NTSD Series Package 28
for Inrush Current Suppression Lead Type 29
Current-R Ratio (RT/R25) / Current-Temperature Characteristics (Typical) 31
for Inrush Current Suppression Lead Type !Caution / Notice 35
for Inrush Current Suppression Lead Type Package 37
1
2
3
4
5
6
7
CONTENTS
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Recycled Paper
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
o Part Numbering
qProduct ID
wSeries
yResistance Tolerance
uIndividual Specifications
NTC Thermistors for Temp. Sensor and Compensation Chip Type
NC NTC Thermistors Chip Type E
F
J
K
P
±3%
±1%
±5%
±10%
03
Individual Specifications
Product ID
Code
Code
Series
Resistance Tolerance
Code
(Part Number)
tResistance
Expressed by three figures. The unit is ohm (Ω). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. If there is a decimal point, it is expressed by the capital letter "R". In this case, all figures are significant digits.
Structures and others are expressed by two figures.
Please contact us for details.
102
103
104
Ex.)
1kΩ
10kΩ
100kΩ
Code Resistance
Standard Type
iPackaging
RA
RB
RC
RL
Plastic Taping 4mm Pitch
Paper Taping 4mm Pitch
Paper Taping 2mm Pitch (10000 pcs.)
Paper Taping 2mm Pitch (15000 pcs.)
Code Packaging
Plated Termination Series
eDimensions (LgW)
03
15
18
21
Code Dimensions (LgW)
0.60g0.30mm
1.00g0.50mm
1.60g0.80mm
2.00g1.25mm
EIA
0201
0402
0603
0805
rTemperature Characteristics
WB
WD
WF
WL
WM
XC
XF
XQ
XH
XM
XV
XW
Code Temperature Characteristics
Nominal B-Constant 4050e4099K
Nominal B-Constant 4150e4199K
Nominal B-Constant 4250e4299K
Nominal B-Constant 4450e4499K
Nominal B-Constant 4500e4549K
Nominal B-Constant 3100e3149K
Nominal B-Constant 3250e3299K
Nominal B-Constant 3650e3699K
Nominal B-Constant 3350e3399K
Nominal B-Constant 3500e3549K
Nominal B-Constant 3900e3949K
Nominal B-Constant 3950e3999K
y
J
e
18
w
P
r
XH
t
103
u
03
i
RBNC
q
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
qProduct ID
wSeries
tResistance Tolerance
yIndividual Specifications
NTC Thermistors for Temp. Sensor and Compensation Lead Type
NT NTC Thermistors E
F
±3%
±1%
E1
N6
PB
Individual Specifications
Product ID Code Resistance Tolerance
Code
(Part Number)
rResistance
Expressed by three figures. The unit is ohm (Ω). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. If there is a decimal point, it is expressed by the capital letter "R". In this case, all figures are significant digits.
A lead structure and other specifications are expressed by two digits.
202
203
Ex.)
2kΩ
20kΩ
Code Resistance
Standard Bulk (NTSA, NTSD0 Series)
Standard Taping (NTSA Series)
Standard Bulk (NTSD1 Series)
SA0
SD0
SD1
for Temperature Sensors No Lead-coating Type
for Temperature Sensors Lead-coating Type(Total Length 30mm max.)
for Temperature Sensors Lead-coating Type(Total Length 30 to 50mm)
Code
uPackaging (NTSA/NTSD0 Series)
A0
B0
Ammo Pack
Bulk
Code Packaging
uTotal Length (NTSD1 Series)
30
40
50
30mm
40mm
50mm
Code Total Length
Series
eTemperature Characteristics
WB
WC
WD
WF
XM
XH
XR
XV
Nominal B-Constant 4050e4099K
Nominal B-Constant 4100e4149K
Nominal B-Constant 4150e4199K
Nominal B-Constant 4250e4299K
Nominal B-Constant 3500e3549K
Nominal B-Constant 3350e3399K
Nominal B-Constant 3700e3749K
Nominal B-Constant 3900e3949K
Code Temperature Characteristics
t
F
w
SA0
e
XH
r
103
y
E1
u
B0NT
q
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
4
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
y
B0
e
160
r
L
t
BMNT
q w
PA7
qProduct ID
wSeries
rResistance Tolerance
tIndividual Specifications
NTC Thermistors for Inrush Current Suppression
NT NTC Thermistors L
PA7
PA9
PAA
PAD
PAJ
PAN
±15%
DK
DN
BM
Individual Specifications
Product ID
Code
Code
Series
Resistance Tolerance
Code
(Part Number)
eResistance
Expressed by three figures. The unit is ohm (Ω). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. If there is a decimal point, it is expressed by the capital letter "R". In this case, all figures are significant digits.
A lead structure and other specifications are expressed by two capital letters.
3R0
100
Ex.)
3Ω
10Ω
Code Resistance
Standard Type
Standard Type
Standard Type
yPackaging
A0
B0
Ammo Pack
Bulk
Code Packaging
Body Diameter
ø18mm, ø22mm
ø10mm, ø13mm
ø7mm, ø9mm
Inrush CurrentSuppressionLead Type
ø7mm
ø9mm
ø10mm
ø13mm
ø18mm
ø22mm
Nominal Body Diameter
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
5
1. Zero-power Resistance of Thermistor : R
2. B-Constant
R=R0 expB (1/T-1/T0) ..............(1)R : Resistance in ambient temperature T (K)(K : absolute temperature)R0 : Resistance in ambient temperature T0 (K)B : B-constant of Thermistor
as (1) formulaB=Rn (R/R0) / (1/T-1/T0) ............(2)
3. Thermal Dissipation Constant
When electric power P (mW) is spent in ambient temperature T1 and thermistor temperature rises T2, there is a formula as followsP=C (T2-T1) ..................(3)C : Thermal dissipation constant (mW/°C)Thermal dissipation constant is varied with dimensions, measurement conditions, etc.
4. Thermal Time Constant
Period in which Termistor's temperature will change 63.2% of its temperature difference from ambient temperature T0 (°C) to T1 (°C).
[Resistance vs. Temperature]
!Basic Characteristics
!Performance
[Thermal Time Constant]
Item
Resistance
Condition
Measured by zero-power in specified ambient temperature.
Rated Electric Power Shows necessary electric power that Thermistor's temperature rises 100˚C by self heating in ambient temperature 25˚C.
Permissive Operating Current It is possible to keep Thermistor's temperature rising max. 1˚C
Thermal DissipationConstant
Shows necessary electric power that Thermistor's temperature rises 1˚C by self heating.It is calculated by next formula. (mW/˚C)
B-Constant
Calculated between two specified ambient temperatures by next formula.T and T0 is absolute temperature (K).
Rn (R/R0)B =
1/TY1/T0
PC =
TYT0
102
101
Res
ista
nce
VS
. Tem
pera
ture
Cha
ract
eris
tics,
R/R
25
−20Temperature (˚C)
0 20 40 60 80 12010010−2
10−1
1
B=3450B=3900B=4100
Basic Characteristics
T1
T0
Time
63.2%
X
Tem
pera
ture
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Please inquire about test conditions and ratings.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
6
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NTC Thermistorsfor Temperature Compensation 0201 (0603) Size
0201/0402/0603/0805 sized Chip NTC Thermistor have Ni barrier termination and provide excellent solderability and offer high stability in environment by unique inner construction.
Features1. Excellent solderability and high stability in environment2. Excellent long time aging stability3. High accuracy in resistance and B-constant4. Reflow soldering possible5. Lead is not contained in the product.
Applications1. Temperature compensation of transistor, IC, crystal oscillator of mobile communications equipment2. Temperature sensor for rechargeable batteries3. Temperature compensation of LCD4. Temperature compensation and sensing of car audio equipment (CD, MD, Tuner)5. Temperature compensation of several kinds of circuits
Electrode(Ag System + Ni Plating + Sn Plating)
0.15±0.05 0.15±0.050.60±0.03
(in mm)
0.30
±0.0
30.
30±0
.03
Part NumberResistance
(25°C)
B-Constant(25-50°C)
(K)
Permissive OperatingCurrent (25°C)
(mA)
Rated ElectricPower (25°C)
(mW)
Typical DissipationConstant (25°C)
(mW/°C)
OperatingTemperature Range
(°C)
NCP03YS110p05RL 11ohm 2750 ±3% 9.50 100 1.0 -40 to 125
NCP03YS220p05RL 22ohm 2750 ±3% 6.70 100 1.0 -40 to 125
NCP03YS330p05RL 33ohm 2750 ±3% 5.50 100 1.0 -40 to 125
NCP03YS470p05RL 47ohm 2750 ±3% 4.60 100 1.0 -40 to 125
NCP03YS680p05RL 68ohm 2750 ±3% 3.80 100 1.0 -40 to 125
NCP03YS101p05RL 100ohm 2750 ±3% 3.10 100 1.0 -40 to 125
NCP03XH682p05RL 6.8k ohm 3380 ±3% 0.38 100 1.0 -40 to 125
NCP03XH103p05RL 10k ohm 3380 ±3% 0.31 100 1.0 -40 to 125
NCP03XH153p05RL 15k ohm 3380 ±3% 0.25 100 1.0 -40 to 125
NCP03XH223p05RL 22k ohm 3380 ±3% 0.21 100 1.0 -40 to 125
NCP03WF333p05RL 33k ohm 4250 ±3% 0.17 100 1.0 -40 to 125
NCP03WB473p05RL 47k ohm 4050 ±3% 0.14 100 1.0 -40 to 125
NCP03WL473p05RL 47k ohm 4485 ±3% 0.14 100 1.0 -40 to 125
NCP03WF683p05RL 68k ohm 4250 ±3% 0.12 100 1.0 -40 to 125
NCP03WL683p05RL 68k ohm 4485 ±3% 0.12 100 1.0 -40 to 125
NCP03WF104p05RL 100k ohm 4250 ±3% 0.10 100 1.0 -40 to 125
NCP03WL104p05RL 100k ohm 4485 ±3% 0.10 100 1.0 -40 to 125
NCP03WL154p05RL 150k ohm 4485 ±3% 0.08 100 1.0 -40 to 125
NCP03WL224p05RL 220k ohm 4485 ±3% 0.06 100 1.0 -40 to 125
A blank column is filled with resistance tolerance codes. (J: ±5%, K: ±10%)
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
7
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Standard Land Dimensions
Chip
a
a b c
c
b
Land
Solder Resist
Soldering Methods
Reflow Soldering
(in mm)
0.25 0.30.25
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
8
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NTC Thermistorsfor Temperature Compensation 0402 (1005) Size
0201/0402/0603/0805 sized Chip NTC Thermistors have Nibarrier termination and provide excellentsolderability and offer high stability in environmentby unique inner construction.
Features1. Excellent solderability and high stability in environment2. Excellent long time aging stability3. High accuracy in resistance and B-constant4. Reflow soldering possible5. Same B-constant in the same resistance in the three sizes (0805/0603/0402) Easy to use smaller size in the circuits6. Lead is not contained in the product.7. NCP15/18/21 series are recognized by UL (UL1434, File No. E137188 Vol. 2, Sec. 2)
Applications1. Temperature compensation of transistor, IC, crystal oscillator of mobile communications equipment2. Temperature sensor for rechargeable batteries3. Temperature compensation of LCD4. Temperature compensation and sensing of car audio equipment (CD, MD, Tuner)5. Temperature compensation of several kinds of circuits
Electrode(Ag Alloy + Ni Plating + Sn Plating)
0.25±0.10 0.25±0.101.0±0.05
(in mm)
0.5±
0.05
0.5±
0.05
Part NumberResistance
(25°C)
B-Constant(25-50°C)
(K)
Permissive OperatingCurrent (25°C)
(mA)
Rated ElectricPower (25°C)
(mW)
Typical DissipationConstant (25°C)
(mW/°C)
OperatingTemperature Range
(°C)
NCP15XC220p03RC 22ohm 3100 ±3% 6.70 100 1.0 -40 to 125
NCP15XC330p03RC 33ohm 3100 ±3% 5.50 100 1.0 -40 to 125
NCP15XC470p03RC 47ohm 3100 ±3% 4.60 100 1.0 -40 to 125
NCP15XC680p03RC 68ohm 3100 ±3% 3.80 100 1.0 -40 to 125
NCP15XF101p03RC 100ohm 3250 ±3% 3.10 100 1.0 -40 to 125
NCP15XF151p03RC 150ohm 3250 ±3% 2.50 100 1.0 -40 to 125
NCP15XM221p03RC 220ohm 3500 ±3% 2.10 100 1.0 -40 to 125
NCP15XM331p03RC 330ohm 3500 ±3% 1.70 100 1.0 -40 to 125
NCP15XQ471p03RC 470ohm 3650 ±2% 1.40 100 1.0 -40 to 125
NCP15XQ681p03RC 680ohm 3650 ±3% 1.20 100 1.0 -40 to 125
NCP15XQ102p03RC 1.0k ohm 3650 ±2% 1.00 100 1.0 -40 to 125
NCP15XW152p03RC 1.5k ohm 3950 ±3% 0.81 100 1.0 -40 to 125
NCP15XW222p03RC 2.2k ohm 3950 ±3% 0.67 100 1.0 -40 to 125
NCP15XW332p03RC 3.3k ohm 3950 ±3% 0.55 100 1.0 -40 to 125
NCP15XM472p03RC 4.7k ohm 3500 ±2% 0.46 100 1.0 -40 to 125
NCP15XW682p03RC 6.8k ohm 3950 ±3% 0.38 100 1.0 -40 to 125
NCP15XH103p03RC 10k ohm 3380 ±1% 0.31 100 1.0 -40 to 125
NCP15XV103p03RC 10k ohm 3900 ±3% 0.31 100 1.0 -40 to 125
NCP15XW153p03RC 15k ohm 3950 ±3% 0.25 100 1.0 -40 to 125
NCP15XW223p03RC 22k ohm 3950 ±3% 0.21 100 1.0 -40 to 125
NCP15WL223p03RC 22k ohm 4485 ±1% 0.21 100 1.0 -40 to 125
NCP15WB333p03RC 33k ohm 4050 ±3% 0.17 100 1.0 -40 to 125
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
9
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part NumberResistance
(25°C)
B-Constant(25-50°C)
(K)
Permissive OperatingCurrent (25°C)
(mA)
Rated ElectricPower (25°C)
(mW)
Typical DissipationConstant (25°C)
(mW/°C)
OperatingTemperature Range
(°C)
Continued from the preceding page.
NCP15WL333p03RC 33k ohm 4485 ±1% 0.17 100 1.0 -40 to 125
NCP15WB473p03RC 47k ohm 4050 ±1% 0.14 100 1.0 -40 to 125
NCP15WL473p03RC 47k ohm 4485 ±1% 0.14 100 1.0 -40 to 125
NCP15WD683p03RC 68k ohm 4150 ±3% 0.12 100 1.0 -40 to 125
NCP15WL683p03RC 68k ohm 4485 ±1% 0.12 100 1.0 -40 to 125
NCP15WF104p03RC 100k ohm 4250 ±1% 0.10 100 1.0 -40 to 125
NCP15WL104p03RC 100k ohm 4485 ±1% 0.10 100 1.0 -40 to 125
NCP15WM154p03RC 150k ohm 4500 ±3% 0.08 100 1.0 -40 to 125
NCP15WL154p03RC 154k ohm 4485 ±1% 0.08 100 1.0 -40 to 125
NCP15WM224p03RC 220k ohm 4500 ±3% 0.06 100 1.0 -40 to 125
NCP15WM474p03RC 470k ohm 4500 ±3% 0.04 100 1.0 -40 to 125
A blank column is filled with resistance tolerance codes. (J: ±5%, K: ±10%)
Tolerance ±1% is also available for the following type.
10k ohm: NCP15XH103F03RC
47k ohm: NCP15WB473F03RC
100k ohm: NCP15WF104F03RC
Standard Land Dimensions
Chip
a
a b c
c
b
Land
Solder Resist
Soldering Methods
Reflow Soldering
(in mm)
0.4 0.50.4−0.5
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
10
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NTC Thermistorsfor Temperature Compensation 0603 (1608) Size
0201/0402/0603/0805 sized Chip NTC Thermistors have Nibarrier termination and provide excellentsolderability and offer high stability in environmentby unique inner construction.
Features1. Excellent solderability and high stability in environment2. Excellent long time aging stability3. High accuracy in resistance and B-constant4. Flow/Reflow soldering possible5. Same B-constant in the same resistance in the three sizes (0805/0603/0402) Easy to use smaller size in the circuits6. Lead is not contained in the product7. NCP15/18/21 series are recognized by UL (UL1434, File No. E137188 Vol. 2, Sec. 2)
Applications1. Temperature compensation of transistor, IC, crystal oscillator of mobile communications equipment2. Temperature sensor for rechargeable batteries3. Temperature compensation of LCD4. Temperature compensation and sensing of car audio equipment (CD, MD, Tuner)5. Temperature compensation of several kinds of circuits
Electrode(Ag Alloy + Ni Plating + Sn Plating)
0.2—0.6 0.2—0.61.6±0.15
(in mm)
0.8±
0.15
0.8±
0.15
Part NumberResistance
(25°C)
B-Constant(25-50°C)
(K)
Permissive OperatingCurrent (25°C)
(mA)
Rated ElectricPower (25°C)
(mW)
Typical DissipationConstant (25°C)
(mW/°C)
OperatingTemperature Range
(°C)
NCP18XF101p03RB 100ohm 3250 ±3% 3.10 100 1.0 -40 to 125
NCP18XF151p03RB 150ohm 3250 ±3% 2.50 100 1.0 -40 to 125
NCP18XM221p03RB 220ohm 3500 ±3% 2.10 100 1.0 -40 to 125
NCP18XM331p03RB 330ohm 3500 ±3% 1.70 100 1.0 -40 to 125
NCP18XQ471p03RB 470ohm 3650 ±2% 1.40 100 1.0 -40 to 125
NCP18XQ681p03RB 680ohm 3650 ±3% 1.20 100 1.0 -40 to 125
NCP18XQ102p03RB 1.0k ohm 3650 ±2% 1.00 100 1.0 -40 to 125
NCP18XW152p03RB 1.5k ohm 3950 ±3% 0.81 100 1.0 -40 to 125
NCP18XW222p03RB 2.2k ohm 3950 ±3% 0.67 100 1.0 -40 to 125
NCP18XW332p03RB 3.3k ohm 3950 ±3% 0.55 100 1.0 -40 to 125
NCP18XM472p03RB 4.7k ohm 3500 ±2% 0.46 100 1.0 -40 to 125
NCP18XW682p03RB 6.8k ohm 3950 ±3% 0.38 100 1.0 -40 to 125
NCP18XH103p03RB 10k ohm 3380 ±1% 0.31 100 1.0 -40 to 125
NCP18XW153p03RB 15k ohm 3950 ±3% 0.25 100 1.0 -40 to 125
NCP18XW223p03RB 22k ohm 3950 ±3% 0.21 100 1.0 -40 to 125
NCP18WB333p03RB 33k ohm 4050 ±3% 0.17 100 1.0 -40 to 125
NCP18WB473p03RB 47k ohm 4050 ±2% 0.14 100 1.0 -40 to 125
NCP18WD683p03RB 68k ohm 4150 ±3% 0.12 100 1.0 -40 to 125
NCP18WF104p03RB 100k ohm 4250 ±2% 0.10 100 1.0 -40 to 125
NCP18WM154p03RB 150k ohm 4500 ±3% 0.08 100 1.0 -40 to 125
NCP18WM224p03RB 220k ohm 4500 ±3% 0.06 100 1.0 -40 to 125
NCP18WM474p03RB 470k ohm 4500 ±3% 0.04 100 1.0 -40 to 125
A blank column is filled with resistance tolerance codes. (J: ±5%, K: ±10%)
Tolerance ±1% NCP18XH103F03RB is also availalbe for 10k ohm type.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
11
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Standard Land Dimensions
Chip LandSolder Resist
b a
c
Soldering Methods a b c
Flow Soldering
Reflow Soldering
0.6-1.0
0.6-0.8
0.8-0.9
0.6-0.7
0.6-0.8
0.6-0.8
(in mm)
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
12
4
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NTC Thermistorsfor Temperature Compensation 0805 (2012) Size
0201/0402/0603/0805 sized Chip NTC Thermistors have Nibarrier termination and provide excellentsolderability and offer high stability in environmentby unique inner construction.
Features1. Excellent solderability and high stability in environment2. Excellent long time aging stability3. High accuracy in resistance and B-constant4. Flow/Reflow soldering possible5. Same B-constant in the same resistance in the three sizes (0805/0603/0402) Easy to use smaller size in the circuits6. Lead is not contained in the product7. NCP15/18/21 series are recognized by UL (UL1434, File No. E137188 Vol. 2, Sec. 2)
Applications1. Temperature compensation of transistor, IC, crystal oscillator of mobile communications equipment2. Temperature sensor for rechargeable batteries3. Temperature compensation of LCD4. Temperature compensation and sensing of car audio equipment (CD, MD, Tuner)5. Temperature compensation of several kinds of circuits
2.0±0.2
0.2—0.7 0.2—0.7
Electrode(Ag Alloy + Ni Plating + Sn Plating)
1.25
±0.2
0.85
±0.1
5
(in mm)
Part NumberResistance
(25°C)
B-Constant(25-50°C)
(K)
Permissive OperatingCurrent (25°C)
(mA)
Rated ElectricPower (25°C)
(mW)
Typical DissipationConstant (25°C)
(mW/°C)
OperatingTemperature Range
(°C)
NCP21XM221p03RA 220ohm 3500 ±3% 3.00 200 2.0 -40 to 125
NCP21XQ471p03RA 470ohm 3650 ±3% 2.00 200 2.0 -40 to 125
NCP21XQ102p03RA 1.0k ohm 3650 ±3% 1.40 200 2.0 -40 to 125
NCP21XW222p03RA 2.2k ohm 3950 ±3% 0.90 200 2.0 -40 to 125
NCP21XM472p03RA 4.7k ohm 3500 ±3% 0.65 200 2.0 -40 to 125
NCP21XV103p03RA 10k ohm 3900 ±3% 0.44 200 2.0 -40 to 125
NCP21XW153p03RA 15k ohm 3950 ±3% 0.36 200 2.0 -40 to 125
NCP21XW223p03RA 22k ohm 3950 ±3% 0.30 200 2.0 -40 to 125
NCP21WB333p03RA 33k ohm 4050 ±3% 0.24 200 2.0 -40 to 125
NCP21WB473p03RA 47k ohm 4050 ±3% 0.20 200 2.0 -40 to 125
NCP21WF104p03RA 100k ohm 4250 ±3% 0.14 200 2.0 -40 to 125
A blank column is filled with resistance tolerance codes. (J: ±5%, K: ±10%)
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
13
4
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Standard Land Dimensions
Chip LandSolder Resist
b a
c
Soldering Methods a b c
Flow Soldering
Reflow Soldering
1.0-1.1
1.0-1.1
0.9-1.0
0.6-0.7
1.0-1.2
1.0-1.2
(in mm)
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
Y40Y35Y30Y25Y20Y15Y10Y505
101520253035404550556065707580859095100105110115120125
127.366101.66281.72666.14853.94644.27336.49430.26225.22621.15017.82815.10312.85911.0009.4528.1627.0776.1615.3894.7314.1683.6873.2732.9152.6052.3352.1001.8941.7131.5541.4121.2871.1761.077
NCPppYS110
Resistance (Ω)Temp. (°C)B-ConstantResistance
Part Number
254.732203.325163.452132.296107.89388.54672.98760.52350.45142.30035.65730.20525.71922.00018.90416.32314.15512.32310.7789.4618.3367.3746.5455.8305.2104.6714.2013.7893.4273.1072.8252.5742.3522.153
NCPppYS220
Resistance (Ω)355.823273.975213.003166.943131.997105.31884.67068.62855.98145.85937.81931.39626.21122.00018.56015.73513.40311.4629.8428.4887.3486.3995.5954.8964.2993.7953.3602.9832.6562.3672.1161.9011.7121.543
NCPppXC220
Resistance (Ω)382.098304.987245.178198.444161.839132.819109.48190.78575.67763.44953.48545.30838.57833.00028.35624.48521.23218.48416.16714.19212.50411.0619.8178.7447.8147.0066.3015.6835.1404.6614.2373.8623.5283.230
NCPppYS330
Resistance (Ω)533.734410.962319.504250.415197.996157.978127.005102.94283.97268.78956.72847.09439.31733.00027.84023.60320.10417.19314.76312.73211.0229.5988.3927.3456.4485.6925.0404.4743.9833.5513.1732.8512.5682.314
NCPppXC330
Resistance (Ω)544.201434.376349.193282.633230.498189.167155.927129.299107.78290.36776.17664.52954.94447.00040.38634.87230.23926.32623.02520.21317.80915.75313.98212.45411.1309.9798.9748.0947.3206.6386.0355.5005.0244.600
NCPppYS470
Resistance (Ω)760.166585.310455.051356.652281.994224.998180.886146.614119.59697.97280.79467.07355.99747.00039.65133.61628.63324.48721.02618.13315.69813.67011.95210.4619.1848.1077.1796.3735.6735.0574.5204.0603.6573.296
NCPppXC470
Resistance (Ω)787.354628.459505.215408.915333.487273.688225.597187.071155.940130.744110.21293.36179.49468.00058.43050.45443.75038.08933.31329.24425.76622.79220.23018.01916.10214.43712.98411.71010.5919.6048.7317.9577.2696.655
NCPppYS680
Resistance (Ω)
1
Y40Y35Y30Y25Y20Y15Y10Y505
101520253035404550556065707580859095100105110115120125
1157.874924.204742.963601.346490.422402.482331.760275.105229.324192.270162.076137.296116.902100.00085.92774.19764.33956.01348.98943.00637.89133.51729.75026.49823.68021.23119.09417.22115.57514.12412.84011.70210.6909.787
NCPppYS101
Resistance (Ω)1824.1751390.6851070.653831.138650.960514.441409.700328.877265.759215.785176.395145.161120.152100.00083.66970.36159.45650.47043.02936.83031.64927.36423.75620.65118.01115.80013.90812.26310.8449.6228.5637.6486.8506.162
NCPppXF101
Resistance (Ω)2736.2622086.0281605.9791246.708976.440771.661614.550493.315398.639323.677264.592217.742180.228150.000125.503105.54189.18475.70564.54355.24647.47341.04535.63430.97627.01623.70020.86218.39416.26514.43412.84411.47210.2759.243
NCPppXF151
Resistance (Ω)4947.9043703.7552798.8732135.8871645.0371278.0341000.620789.612627.752502.474405.010328.480268.044220.000181.576150.668125.681105.33688.71775.05963.77754.41546.63140.11534.63730.01326.11022.79019.95717.54115.45313.66312.11410.778
NCPppXM221
Resistance (Ω)7421.8565555.6324198.3093203.8312467.5551917.0511500.9301184.418941.628753.711607.514492.720402.066330.000272.365226.002188.521158.004133.076112.58895.66681.62269.94660.17251.95545.01939.16534.18629.93526.31223.18020.49418.17116.168
NCPppXM331
Resistance (Ω)11822.4738767.7456570.2244971.7843796.9332923.4002269.5991775.2251399.0501110.220887.257713.463577.375470.000384.800316.757262.177218.069182.297153.150129.249109.55193.28179.75068.44658.99651.03644.33238.64033.79029.66426.12323.09120.472
NCPppXQ471
Resistance (Ω)17104.85412685.2489505.8557193.2195493.4364229.5993283.6752568.4112024.1581606.2751283.6911032.245835.351680.000556.733458.287379.320315.504263.749221.579186.998158.499134.960115.38399.02985.35673.83964.14055.90548.88842.91837.79533.40929.618
NCPppXQ681
Resistance (Ω)
Continued on the following page.
1099.815846.832658.372516.007407.991325.529261.707212.123173.033141.747116.89497.04281.01668.00057.36848.63641.42635.42830.42126.23522.71219.77817.29315.13413.28811.72910.3869.2208.2087.3176.5395.8745.2914.768
NCPppXC680
Resistance (Ω)
2750K 2750K 3100K 2750K 3100K 2750K 3100K 2750K
2750K 3250K 3250K 3500K 3500K 3650K 3650K3100K
11Ω 22Ω 22Ω 33Ω 33Ω 47Ω 47Ω 68Ω
100Ω 100Ω 150Ω 220Ω 330Ω 470Ω 680Ω68Ω
Temp. (°C)B-ConstantResistance
Part Number
for Temperature Compensation Temperature Characteristics (Center Value)
14
4
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
2
Continued from the preceding page.
Y40Y35Y30Y25Y20Y15Y10Y505
101520253035404550556065707580859095100105110115120125
75.96154.52039.60729.10321.60116.19812.2649.3707.2195.6094.3913.4632.7512.2001.7711.4341.1690.9580.7890.6540.5450.4560.3830.3240.2750.2340.2000.1720.1490.1290.1120.0980.0850.075
NCPppXW222
Resistance (kΩ)113.94181.77959.41143.65432.40124.29718.39614.05510.8298.4146.5865.1954.1263.3002.6562.1521.7531.4371.1840.9810.8170.6840.5750.4860.4120.3510.3010.2580.2230.1930.1680.1460.1280.113
NCPppXW332 NCPppXM472
Resistance (kΩ)105.70579.12659.79445.63035.14427.30321.37716.86913.41110.7358.6537.0185.7264.7003.8793.2192.6852.2501.8951.6041.3631.1630.9960.8570.7400.6410.5580.4870.4260.3750.3300.2920.2590.230
Resistance (kΩ)133.122100.81077.11359.56646.41936.49428.91323.05218.51214.97712.1919.9798.2156.8005.6544.7243.9673.3432.8292.4032.0491.7581.5141.3081.1340.9870.8620.7540.6620.5830.5150.4560.4050.361
NCPppXH682
Resistance (kΩ)234.787168.515122.42289.95366.76650.06637.90628.96322.31317.33813.57110.7058.5036.8005.4744.4343.6132.9612.4402.0221.6831.4091.1851.0010.8490.7240.6200.5320.4590.3980.3460.3020.2640.232
NCPppXW682
Resistance (kΩ)195.652148.171113.34787.55968.23753.65042.50633.89227.21922.02117.92614.67412.08110.0008.3156.9485.8344.9174.1613.5353.0142.5862.2281.9251.6691.4521.2681.1100.9740.8580.7580.6720.5960.531
NCPppXH103
NCPppXV103
Resistance (kΩ)
328.996237.387173.185127.77395.32771.74654.56441.81332.33025.19419.78515.65112.46810.0008.0726.5565.3564.4013.6353.0192.5212.1151.7811.5091.2841.0970.9410.8100.7010.6080.5300.4630.4060.358
Resistance (kΩ)293.651222.375170.103131.395102.39480.50163.77850.85140.83633.03726.89122.01218.12215.00012.47110.4218.7507.3746.2405.3014.5203.8783.3402.8862.5022.1771.9011.6641.4601.2861.1361.0070.8940.796
NCPppXH153
Resistance (kΩ)Y40Y35Y30Y25Y20Y15Y10Y505
101520253035404550556065707580859095100105110115120125
430.688326.150249.484192.712150.178118.06893.54074.58159.89348.45439.44132.28426.57822.00018.29115.28412.83310.8169.1527.7756.6305.6884.8994.2333.6693.1942.7882.4402.1411.8871.6671.4771.3111.168
NCPppXH223 NCPppXW223
Resistance (kΩ)759.605545.196396.070291.025216.008161.977122.63893.70272.19156.09343.90734.63327.50922.00017.70914.34411.6889.5787.8946.5405.4464.5593.8323.2392.7482.3422.0041.7221.4861.2871.1190.9750.8540.750
Resistance (kΩ)1073.436753.900535.073383.590277.643202.813149.462111.08283.23362.85847.83136.66428.30422.00017.21413.55710.7448.5666.8715.5434.4973.6693.0092.4812.0561.7131.4341.2061.0190.8660.7390.6330.5450.471
NCPppWL223
Resistance (kΩ)1227.263874.449630.851460.457339.797253.363190.766144.964111.08785.84266.86152.47041.47133.00026.43021.29817.26614.07611.5389.5067.8706.5495.4754.5953.8743.2822.7892.3792.0381.7511.5091.3061.1340.987
NCPppWB333
Resistance (kΩ)1451.0491019.238725.084522.021379.842279.371207.566155.639117.81489.92569.20453.67541.93733.00026.14320.84516.72313.49810.9548.9407.3346.0465.0114.1703.4872.9282.4692.0911.7771.5161.2981.1160.9620.832
NCPppWF333
Resistance (kΩ)517.912371.724270.048198.426147.278110.43983.61763.88849.22138.24529.93623.61318.75615.00012.0749.7807.9696.5315.3824.4593.7133.1082.6132.2081.8731.5971.3671.1741.0130.8780.7630.6650.5820.511
NCPppXW153
Resistance (kΩ)
Continued on the following page.
25.15418.65513.97910.5788.0796.2204.8293.7772.9772.3621.8881.5181.2291.0000.8190.6740.5580.4640.3880.3260.2750.2330.1990.1700.1460.1260.1090.0940.0820.0720.0630.0560.0490.044
NCPppXQ102
Resistance (kΩ)51.79137.17227.00519.84314.72811.0448.3626.3894.9223.8252.9942.3611.8761.5001.2070.9780.7970.6530.5380.4460.3710.3110.2610.2210.1870.1600.1370.1170.1010.0880.0760.0670.0580.051
NCPppXW152
Resistance (kΩ)3950K 3950K 3500K 3380K 3950K 3380K
3900K 3380K 3380K 3950K 4485K 4050K 4250K3950K
3650K 3950K2.2kΩ 3.3kΩ 4.7kΩ 6.8kΩ 6.8kΩ 10kΩ
10kΩ 15kΩ 22kΩ 22kΩ 22kΩ 33kΩ 33kΩ15kΩ
1kΩ 1.5kΩ
Temp. (°C)B-ConstantResistance
Part Number
Temp. (°C)B-ConstantResistance
Part Number
for Temperature Compensation Temperature Characteristics (Center Value)
15
4
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
3
Continued from the preceding page.
Y40Y35Y30Y25Y20Y15Y10Y505
101520253035404550556065707580859095100105110115120125
2990.0412100.2471494.1131075.679782.705575.674427.712320.710242.768185.300142.603110.60286.41568.00053.87142.95434.46027.81422.57218.42215.11312.45910.3258.5927.1856.0335.0874.3093.6613.1242.6752.2991.9831.715
NCPppWF683
Resistance (kΩ)3317.8932330.2371653.8621185.641858.168626.875461.974343.345257.266194.287147.841113.32587.48468.00053.20841.90333.20826.47721.23717.13313.90011.3399.3007.6686.3565.2944.4323.7283.1512.6762.2831.9561.6841.456
NCPppWL683 NCPppWF104
Resistance (kΩ)4397.1193088.5992197.2251581.8811151.037846.579628.988471.632357.012272.500209.710162.651127.080100.00079.22263.16750.67740.90433.19527.09122.22418.32315.18412.63510.5668.8737.4816.3375.3844.5943.9343.3802.9162.522
Resistance (kΩ)4879.2543426.8182432.1491743.5901262.012921.875679.373504.919378.333285.717217.414166.654128.653100.00078.24761.62248.83538.93731.23125.19520.44116.67513.67711.2779.3467.7856.5175.4824.6343.9353.3572.8772.4762.141
NCPppWL104
Resistance (kΩ)
Y40Y35Y30Y25Y20Y15Y10Y505
101520253035404550556065707580859095100105110115120125
7318.8815140.2283648.2242615.3851893.0181382.8131019.059757.379567.499428.575326.121249.981192.979150.000117.37092.43373.25258.40646.84637.79330.66125.01320.51616.91614.01911.6789.7768.2236.9515.9025.0354.3153.7143.211
NCPppWL154
Resistance (kΩ)7899.4665466.1183834.4992720.5231951.2161415.5651036.984767.079572.667431.264327.405250.538193.166150.000117.28192.29373.09058.24046.66537.60530.45324.80420.29316.67913.77611.4289.5207.9666.6885.6394.7724.0523.4542.955
NCPppWM154 NCPppWL224
Resistance (kΩ)10734.3587539.0015350.7293835.8982776.4272028.1261494.6201110.822832.332628.577478.310366.639283.036220.000172.143135.569107.43685.66268.70855.42944.97036.68630.09024.81020.56217.12814.33812.06110.1948.6577.3856.3295.4484.710
Resistance (kΩ)11585.8848016.9735623.9313990.1002861.7842076.1621520.9091125.049839.912632.521480.194367.455283.310220.000172.012135.364107.19885.41968.44155.15344.66536.37929.76324.46220.20516.76113.96211.6849.8098.2706.9985.9425.0674.334
NCPppWM224
Resistance (kΩ)24751.66117127.16912014.7628524.3056113.8114435.4373249.2162403.5151794.3581351.2941025.870785.018605.252470.000367.480289.186229.014182.485146.215117.82895.42077.71863.58452.26043.16635.80829.82824.96120.95517.66814.95112.69510.8249.259
NCPppWM474
Resistance (kΩ)
1610.1541130.850802.609575.385416.464304.219224.193166.623124.85094.28771.74754.99642.45533.00025.82220.33516.11512.84910.3068.3146.7465.5034.5133.7213.0842.5692.1511.8091.5291.2991.1080.9490.8170.707
NCPppWL333
Resistance (kΩ)1747.9201245.428898.485655.802483.954360.850271.697206.463158.214122.25995.22774.73059.06547.00037.64330.33424.59120.04816.43313.53911.2099.3287.7986.5445.5184.6743.9723.3882.9022.4942.1501.8601.6151.406
NCPppWB473
Resistance (kΩ)2293.2491610.6051143.110819.487593.146433.281319.305237.312177.816134.287102.18478.32760.46747.00036.77628.96222.95218.30114.67911.8429.6077.8376.4285.3004.3933.6593.0632.5772.1781.8491.5781.3521.1641.006
NCPppWL473
Resistance (kΩ)2735.3591937.3911389.3451008.014738.978547.456409.600309.217235.606180.980140.139109.34485.92968.00054.16743.42135.01628.40623.16618.99715.65712.96710.7949.0217.5756.3875.4074.5983.9223.3592.8872.4892.1551.870
NCPppWD683
Resistance (kΩ)4250K 4485K 4250K∗ 4485K
4485K 4500K 4485K 4500K 4500K
4485K 4050K 4485K 4150K68kΩ 68kΩ 100kΩ 100kΩ
150kΩ 150kΩ 220kΩ 220kΩ 470kΩ
33kΩ 47kΩ 47kΩ 68kΩ
Temp. (°C)B-ConstantResistance
Part Number
Temp. (°C)B-ConstantResistance
Part Number
∗ B-Constant of NCP18WF104F type is 4200K. Please contact us for the detail data.
for Temperature Compensation Temperature Characteristics (Center Value)
16
4
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
Chip Type !Caution/Notice
17
4
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution (Storage and Operating Conditions)This product is designed for application in an ordinary environment (normal room temperature, humidity and atmospheric pressure). Do not use under the following conditions because all these factors can deteriorate the product characteristics or cause failures and burn-out.1. Corrosive gas or deoxidizing gas (Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.)
2. Volatile or flammable gas3. Dusty conditions4. Under high or low pressure5. Wet or humid locations6. Places with salt water, oils, chemical liquids or organic solvents7. Strong vibrations8. Other places where similar hazardous conditions exist
!Caution (Others)Be sure to provide an appropriate fail-safe function on your product to prevent secondary damages that may be caused by the abnormal function or the failure of our product.
Notice (Storage and Operating Conditions)To keep solderability of product from declining, the following storage condition is recommended.1. Storage condition: Temperature -10 to +40 degree C Humidity less than 75%RH (not dewing condition)2. Storage term: Use this product within 6 months after delivery by first-in and first-out stocking system.
3. Handling after unpacking: After unpacking, reseal product promptly or store it in a sealed container with a drying agent.4. Storage place: Do not store this product in corrosive gas (sulfuric acid gas, chlorine gas, etc.) or in direct sunlight.
Notice (Rating)Use this product within the specified temperature range.Higher temperature may cause deterioration of the characteristics or the material quality of this product.
Notice (Handling)The ceramic of this product is fragile, and care must be taken not to load a excessive press-force or not to give a shock at handling. Such forces may cause cracking or chipping.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
Allowable Reflow Soldering Temperature and Time Standard Soldering Conditions
Allowable Reflow Soldering Temperature and Time Standard Soldering Conditions
Locate this product horizontal to the direction in which stress acts.
Keep this product on the PC Board away from the Separation Line. Worst ← A-C-B-D → Better
[Component Direction]
[Mounting Close to Board Separation Line]
A
B
D
CPerforationHoles
Slit
1. Mounting Position
2. Reflow Soldering Conditions (NCP03/NCP15 Series)
(NCP18/NCP21 Series)
3. Flow Soldering Conditions (NCP18/NCP21 Series)
Choose a mounting position that minimizes the stress imposed on the chip during flexing or bending of the board.
Continued on the following page.
Allowable Flow Soldering Temperature and Time Standard Soldering Conditions
Time (sec.)
Tem
pera
ture
(°C
)
Tem
pera
ture
(°C
)
280
270
260
250
240
230
220
2100 10 20 30
Preheating (in air) SolderingGradual Cooling
(in air)300
200
100
01-2 min. 10sec. max.
Preheating : 160±10°C, 1-2 min.Soldering : 230-260°C, 10sec. max.
Time (sec.)
Tem
pera
ture
(°C
)
280
270
260
250
240
230
220
2100 1109020 30 40 50 60 70 1008010
Tem
pera
ture
(°C
)
Preheating (in air) SolderingGradual Cooling
(in air)300
200
100
01-2 min. 20sec. max.
Preheating : 160±10°C, 1-2 min.Soldering : 230-270°C, 20sec. max.
Time (sec.)
Tem
pera
ture
(°C
)
280
270
260
250
240
230
2200 9020 30 40 50 60 70 8010
Tem
pera
ture
(°C
)Preheating (in air) Soldering
Gradual Cooling(in air)300
200
100
01-2 min. 20sec. max.
Preheating : 160±10°C, 1-2 min.Soldering : 240-270°C, 20sec. max.
1
Notice (Soldering and Mounting)
Chip Type !Caution/Notice
18
4
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note R44E9.pdf 05.4.13
For removing the flux after soldering, observe the following points in order to avoid deterioration of the characteristics or any change of the external electrodes' quality.
Thin or insufficient adhesive may result in loose component contact with land during flow soldering.Low viscosity adhesive causes chips to slip after mounting.
(1) Solder and Paste(a) Reflow Soldering : NCP03/15/18/21 Series
Use RA/RMA type or equivalent type of solder paste. For your reference, we are using the solder paste below for any internal tests of this product.•RMA9086 90-4-M20 (Sn:Pb=63wt%:37wt%)(Manufactured by Alpha Metals Japan Ltd.)•M705-221BM5-42-11 (Sn:Ag:Cu=96.5wt%:3.0wt%:0.5wt%)(Manufactured by Senju Metal Industry Co., Ltd.)
(b) Flow Soldering : NCP18/21 SeriesWe are using the solder paste below. For any internal tests of this product.•Sn : Pb=63wt%:37wt%•Sn : Ag : Cu=96.5wt% : 3.0wt% : 0.5wt%
(2) FluxUse Rosin-based flux.Do not use strong acidic flux (with halide content exceeding 0.2wt%)
NCP03/15 NCP18/21
NCP03
NCP15
NCP18/NCP21
100µm
100µm
150µm
1/3EVTVE
1/3EVTVE
0.2mmVTVE
Part Number The solder paste thickness T
Reference: Optimum Solder Amount
TE
Electrode
Solder Solder
Continued from the preceding page.
4. Solder and Flux
5. Cleaning Conditions
After cleaning, promptly dry this product.6. Drying
The amount of solder is critical. Standard height of fillet is shown in the table below.Too much soldering may cause mechanical stress, resulting in cracking, mechanical and/or electronic damage.
7. Printing Conditions of Solder Paste
8. Adhesive Application and Curing
Isopropyl Alcohol
Less than 5min. at room
temp. or less than 2min.
at 40°C max.
Less than 5min. 20W/r
Frequency of 28 to
40kHz.
Isopropyl Alcohol
Less than 5min. at room
temp. or less than 2min.
at 40°C max.
Less than 1min. 20W/r
Frequency of several
10kHz to 100kHz.
Solvent
Dipping Cleaning
Ultrasonic Cleaning
2
Chip Type !Caution/Notice
19
4
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
NCP03
NCP15
NCP18
NCP21
15000
10000
4000
-
-
4000
Part NumberPaper Tape
Quantity (pcs.)
Plastic Tape
(in mm)
(in mm)
40 min.190-250
Vacant Section
210-250
Top Tape aloneCover Tape alone
Leader Unit
Trailer Unit
Chip-mounting Unit
Direction of Feed
ø180
ø21.0±0.8
ø13.0±0.2
ø60
2.0±0.5
9.013.0±1.0
(1) A tape in a reel contains Leader unit and Trailer unit where
products are not packed. (Please refer to the figure right.)
(2) The top and base tapes or, plastic and cover tape are not
stuck at the first five pitches minimum.
(3) A label should be attached on the reel. (MURATA's part
number, inspection number and quantity should be marked
on the label.)
(4) Taping reels are packed in a package.
1. Dimensions of Reel
2. Taping Method
Tape Carrier Packaging
Minimum Quantity Guide
Continued on the following page.
W0Y1.5
W1.0Y0
W1.
0Y
0
1
Chip Type Package
20
4
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
(1) Other Conditions
(a) Packaging
Products are packaged in the cavity of the base tape and
sealed by top tape and bottom tape.
(b) Tape
Top tape and bottom tape have no joints and products
are packaged and sealed in the cavity of the base tape,
continuously.
(2) Peeling force of top tape
(3) Pull Strength
Pull strength of top tape is specified at 10N minimum.
Pull strength of bottom tape are specified 5N minimum.
3. Paper Tape (NCP03/15/18 Series)
NCP15 Series8mm width 2mm pitch Tape
NCP18 Series8mm width 4mm pitch Tape
1.1 max4.0±0.1 4.0±0.12.0±0.05
ø1.5+0.1/–0
1.75
±0.1
3.5±
0.05
8.0±
0.3
Direction of Feed
1.05∗
0.8 max.4.0±0.12.0±0.05
ø1.5+0.1/–0 1.75
±0.1
3.5±
0.05
1.15
∗
8.0±
0.3
Direction of Feed
0.65∗
(in mm)
∗ Reference Value∗ Reference Value
∗ Reference Value
165-180 ° F
∗ 1 Peeling angle : 165 to 180 degree against the fixed surface of tape.
∗ 2 Peeling speed : 300mm/min.
∗ 3 Peeling force : 0.1 - 0.6N
Continued on the following page.
Continued from the preceding page.
1.85
∗
NCP03 Series
0.5 max4.0±0.12.0±0.05
ø1.5+0.1/–0 1.75
±0.1
3.5±
0.05
0.68
∗
8.0±
0.3
Direction of Feed
0.38∗
2
Chip Type Package
21
4
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
∗ 1 Peeling angle : 165 to 180 degree against the fixed surface of tape.
∗ 2 Peeling speed : 300mm/min.
∗ 3 Peeling force : 0.1 - 0.7N
F165-180 °
Continued from the preceding page.
(2) Peeling force of cover tape
(3) Tape Strength
Pull strength of plastic tape and cover tape shall be specified
10N minimum.
(1) Other Conditions
(a) Packaging
Products are packaged in the each embossed cavity of
plastic tape and sealed by cover tape.
(b) Tape
Cover tape has no joints.
4. Plastic Tape (NCP21 Series)
1.050.2
4.0±0.12.0±0.05
4.0±0.1 φ1.5
1.75
±0.1
φ1.0 1.45∗ ∗ Reference Value
3.5±
0.05
8.0±
0.3
Direction of Feed
2.25
∗
(in mm)
+0.3-0
+0.1-1
3
Chip Type Package
22
4
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
23
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NTC Thermistorsfor Temperature Sensor Lead Type
This product is a sensor type NTC Thermistor to be useful in the normal temperature range developed by the unique ceramic technology and the automatic assembly.
Features1. High-accuracy of +-1% +-1% of resistance and B-Constant tolerance is realized due to uniform thickness by the precise sheet forming method.2. Quick response This product provides faster response time due to its smaller size.3. Taping type is available (Standard type).4. Strong lead strength Original lead-wiring technique assures reliable connection. It can be formed and bent flexibly according to the mounting conditions.
Applications1. Rechargeable batteries2. Battery charging circuits3. Head of printers4. DC fan motors5. Home appliance equipments
Solder Plated Copper Ply Wireø0.4±0.03
31±1
2.5±1.0
6.0
max
.
3.0 max. (∗3.3 max.) 1.8 max. (∗2.5 max.)
Epoxy Resin
(in mm)
∗ It applies to NTSA0XM202, NTSA0WB203 and NTSA0WC303 Type.
Part NumberResistance
(25°C)(k ohm)
B-Constant(25-50°C)
(K)
Permissive OperatingCurrent (25°C)
(mA)
Rated ElectricPower (25°C)
(mW)
Typical DissipationConstant (25°C)
(mW/°C)
Thermal TimeConstant(25°C)(s)
OperatingTemperature Range
(°C)
NTSA0XM202pE1B0 2.0 3500 ±1% 1.05 21 2.1 7 -40 to 125
NTSA0XR502pE1B0 5.0 3700 ±1% 0.68 21 2.1 7 -40 to 125
NTSA0XH103pE1B0 10 3380 ±1% 0.38 15 1.5 7 -40 to 125
NTSA0XV103pE1B0 10 3900 ±1% 0.46 21 2.1 7 -40 to 125
NTSA0WB203pE1B0 20 4050 ±1% 0.31 21 2.1 7 -40 to 125
NTSA0WC303pE1B0 30 4100 ±1% 0.26 21 2.1 7 -40 to 125
NTSA0WD503pE1B0 50 4150 ±1% 0.20 21 2.1 7 -40 to 125
NTSA0WF104pE1B0 100 4250 ±1% 0.14 21 2.1 7 -40 to 125
A blank column is filled with resistance tolerance codes. (F: ±1%, E: ±3%)
Taping type of part numbers with "N6A0" is available. (Lead spacing=5mm)
Temperature Tolerance-Temperature CharacteristicsResistance Tolerance +/-1% Type
Tem
pera
ture
Tol
eran
ce [±
˚C]
-40 125Temperature [˚C]
0 50 100
1.0
2.0
3.0
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
24
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NTC Thermistorsfor Temperature Sensor Lead Insulation Type
This product is a sensor type NTC Thermistor to be useful in the normal temperature range developed by the unique ceramic technology and the automatic assembly.
Features1. Electric insulation on lead wire2. Excellent bending resistance due to suitable hardness of surface coating3. Easy handling due to most suitable hardness of surface of coating4. High-accuracy of +-1% +-1% of resistance and B-Constant tolerance are realized due to uniform thickness by the precise sheet forming method.
Applications1. Rechargeable batteries2. Battery charging circuits3. Head of printers4. DC fan motors5. Home appliance equipments
3.0 max. (∗3.8 max.)
0.60-0.952.5
+1.5−0.5
2.0 max. (∗2.5 max.)
ø0.4±0.03
(Solder PlatedCopper Ply Wire)
(in mm)
5±1
27.0
±2.0
3±1.
5
(Coa
ting
Are
a)
∗ It applies to NTSD0XM202, NTSD0WB203 and NTSD0WC303 Type.
NTSD0 Series
3.0 max. (∗3.8 max.) 2.0 max. (∗2.5 max.)
ø0.45±0.03Sn-3.5Ag Solder Copper Wire
∗ NTSD1XM202/NTSD1WB203/NTSD1WC303 Type
Epoxy Resin
ø0.46±0.03Polyurethane Wire
(in mm)
L ±2
.0
2.5±
1.2
(0.8)
2.5+1.5-0.5
TypeNTSD1_FPB30
NTSD1_FPB40
NTSD1_FPB50
L (mm)30
40
50
NTSD1 Series
NTSD0 Series
Part NumberResistance
(25°C)(k ohm)
B-Constant(25-50°C)
(K)
Permissive OperatingCurrent (25°C)
(mA)
Rated ElectricPower (25°C)
(mW)
Typical DissipationConstant (25°C)
(mW/°C)
Thermal TimeConstant(25°C)(s)
OperatingTemperature Range
(°C)
NTSD0XM202pE1B0 2.0 3500 ±1% 1.05 21 2.1 7 -40 to 125
NTSD0XR502pE1B0 5.0 3700 ±1% 0.68 21 2.1 7 -40 to 125
NTSD0XH103pE1B0 10 3380 ±1% 0.38 15 1.5 7 -40 to 125
NTSD0XV103pE1B0 10 3900 ±1% 0.46 21 2.1 7 -40 to 125
NTSD0WB203pE1B0 20 4050 ±1% 0.31 21 2.1 7 -40 to 125
NTSD0WC303pE1B0 30 4100 ±1% 0.26 21 2.1 7 -40 to 125
NTSD0WD503pE1B0 50 4150 ±1% 0.20 21 2.1 7 -40 to 125
NTSD0WF104pE1B0 100 4250 ±1% 0.14 21 2.1 7 -40 to 125
A blank column is filled with resistance tolerance codes. (F: ±1%, E: ±3%)
NTSD1 Series
Part NumberResistance
(25°C)(k ohm)
B-Constant(25-50°C)
(K)
Permissive OperatingCurrent (25°C)
(mA)
Rated ElectricPower (25°C)
(mW)
Typical DissipationConstant (25°C)
(mW/°C)
Thermal TimeConstant(25°C)(s)
OperatingTemperature Range
(°C)
NTSD1XM202FPBpp 2.0 ±1% 3500 ±1% 1.05 21 2.1 7 -40 to 125
NTSD1XR502FPBpp 5.0 ±1% 3700 ±1% 0.68 21 2.1 7 -40 to 125
NTSD1XH103FPBpp 10 ±1% 3380 ±1% 0.38 15 1.5 7 -40 to 125
NTSD1XV103FPBpp 10 ±1% 3900 ±1% 0.46 21 2.1 7 -40 to 125
NTSD1WB203FPBpp 20 ±1% 4050 ±1% 0.31 21 2.1 7 -40 to 125
NTSD1WC303FPBpp 30 ±1% 4100 ±1% 0.26 21 2.1 7 -40 to 125
NTSD1WD503FPBpp 50 ±1% 4150 ±1% 0.20 21 2.1 7 -40 to 125
NTSD1WF104FPBpp 100 ±1% 4250 ±1% 0.14 21 2.1 7 -40 to 125
A blank column is filled with Total-length codes. (30, 40, 50)
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note R44E9.pdf 05.4.13
25
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Tolerance-Temperature CharacteristicsResistance Tolerance +/-1% Type
Tem
pera
ture
Tol
eran
ce [±
˚C]
-40 125Temperature [˚C]
0 50 100
1.0
2.0
3.0
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
Y40Y35Y30Y25Y20Y15Y10Y505
101520253035404550556065707580859095100105110115120125
44.65733.50525.38819.40214.96111.6449.1337.1985.7164.5713.6822.9872.4372.0001.6511.3711.1430.9580.8070.6830.5820.4970.4260.3670.3180.2760.2400.2100.1830.1610.1420.1250.1110.099
123.48492.29569.61452.86040.48031.27524.33919.15415.14811.9649.5207.6246.1605.0004.0823.3542.7732.2991.9141.6071.3561.1490.9780.8340.7140.6120.5270.4560.3960.3450.3020.2640.2320.205
195.652148.171113.34787.55968.23753.65042.50633.89227.21922.02117.92614.67412.08110.0008.3156.9485.8344.9174.1613.5353.0142.5862.2281.9251.6691.4521.2681.1100.9740.8580.7580.6710.5960.531
347.808248.591179.973131.83297.67973.11955.30142.25732.58225.32419.84715.67912.47810.0008.0686.5525.3534.3993.6353.0202.5212.1151.7831.5101.2841.0960.9390.8080.6980.6050.5270.4600.4030.354
NTSppXM202 NTSppXR502 NTSppXH103 NTSppXV103
Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)
1
733.007524.831380.184277.845205.260153.642116.01688.12567.52252.16840.61731.84725.15120.00016.01412.90210.4578.5276.9935.7714.7893.9923.3432.8092.3712.0201.7291.4761.2641.0850.9350.8120.7080.617
1149.500819.651591.391430.529316.870236.337177.842134.630102.81679.18361.46048.04537.83430.00023.95519.24915.56012.65710.3548.5257.0585.8694.9054.1133.4632.9452.5162.1431.8321.5711.3501.1711.0190.886
1948.5751387.289999.456728.895537.039399.167299.469226.186172.393132.857103.08980.43063.20150.00039.82531.91825.73320.87717.03413.92911.4399.4857.9066.6145.5584.6863.9673.3732.8782.4652.1181.8281.5831.374
4256.7523005.8882148.5141555.0201137.312839.314625.338469.127355.224272.045209.803162.713127.117100.00079.21563.15050.64940.88533.19527.01422.07918.22615.1242.598
10.5428.8527.4636.3215.3744.5853.9253.3762.9132.520
NTSppWB203 NTSppWC303 NTSppWD503 NTSppWF104
Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)3500K 3700K 3380K 3900K 4050K 4100K 4150K 4250K2.0kΩ 5.0kΩ 10kΩ 10kΩ 20kΩ 30kΩ 50kΩ 100kΩ
Temp. (°C)B-ConstantResistance
Part Number
for Temperature Sensor Temperature Characteristics (Center Value)
26
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
for Temperature Sensor Lead Type/Lead Insulation Type !Caution/Notice
27
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution (Storage and Operating Conditions)This product is designed for application in an ordinary environment (normal room temperature, humidity and atmospheric pressure). Do not use under the following conditions because all these factors can deteriorate the product characteristics or cause failures and burn-out.1. Corrosive gas or deoxidizing gas (Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.)
2. Volatile or flammable gas3. Dusty conditions4. Under high or low pressure5. Wet or humid locations6. Places with salt water, oils, chemical liquids or organic solvents7. Strong vibrations8. Other places where similar hazardous conditions exist
!Caution (Others)Be sure to provide an appropriate fail-safe function on your product to prevent secondary damages that may be caused by the abnormal function or the failure of our product.
Notice (Storage and Operating Conditions)To keep solderability of product from declining, the following storage condition is recommended.1. Storage condition: Temperature -10 to +40 degree C Humidity less than 75%RH (not dewing condition)2. Storage term: Use this product within 6 months after delivery by first-in and first-out stocking system.
3. Handling after unpacking: After unpacking, reseal product promptly or store it in a sealed container with a drying agent.4. Storage place: Do not store this product in corrosive gas (sulfuric acid gas, chlorine gas, etc.) or in direct sunlight.
Notice (Rating)Use this product within the specified temperature range.Higher temperature may cause deterioration of the characteristics or the material quality of this product.
Notice (Soldering and Mounting)1. Be sure that the preheat-up does not melt the soldering of this product. Excessive heat may cause failure to open, short or insulation break down.2. Do not touch the body with soldering iron. The soldering point should be min. 5mm away from the root of lead wire.
Notice (Handling)1. The ceramic element of this product is fragile, and care must be taken not to load an excessive press-force or not to give a shock at handling. Such forces may cause cracking or chipping.2. Do not apply an excessive force to the lead. Otherwise, it may cause junction between lead and element to break or crack. Holding element by side lead wire is recommended when lead wire is bent or cut.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
for Temperature Sensor Lead Type/Lead Insulation Type NTSA/NTSD Series Package
28
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Item Code Dimensions (mm)
Pitch of Component
Pitch of Sprocket Hole
Lead Spacing
Lead Length from Hole Center to Component Center
Lead Length from Hole Center to Lead
Body Diameter
Deviation along Tape, Left or Right
Carrier Tape Width
Position of Sprocket Hole
Lead Distance between Reference and Bottom Planes
Height of Component
Overflow of Lead
Diameter of Sprocket Hole
Lead Diameter
Total Tape Thickness
Total Thickness, Tape and Lead Wire
Deviation across Tape
Portion to Cut in Case of Defect
Hole Down Tape Width
Hole Down Tape Position
Coating Extension on Lead
Thickness
P
P0
F
P2
P1
D
∆S
W
W1
H0
H2
I
D0
d
t1
t2
∆h1, ∆h2
L
W0
W2
e
T
12.7
12.7±0.3
5.0+0.8/–0.2
6.35±1.3
3.85±0.8
3.5 max.
0±2.0
18.0±0.5
9.0±0.5
16.0±1.0
4.0 max.
+0.5 to –1.0
4.0±0.1
0.50±0.03
0.6±0.3
1.6 max.
1.0 max.
11.0+0/–2.0
11.0 min.
1.5±1.5
Up to the crimp point
2.6 max.
(in mm)
Minimum Quantity
Taping Dimensions (NTSA Series)
P2
P0I
L
P ∆S
H2
W2
W0
H0W1
W
t2 t1
∆h2 ∆h1
T
øD0
D
P1 ød
F
e
Part NumberAmmo Pack
Minimum Quantity (pcs.)
Bulk
NTSA 3000 100
NTSD - 100
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
29
7
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NTC Thermistorsfor Inrush Current Suppression Lead Type
This product effectively supresses surge currents which are generated when switching power regulators are turned on.
Features1. Lead is not contained in the ceramic element, the terminations, the solder for inner connection and the coating resin.2. Most suitable for power supplies of less than 100W3. Excellent recovery characteristics due to resin coating with excellent heat characteristics4. Highly reliable
Applications1. Switching power supplies2. CRT monitors 3. Color televisions4. VCR-Power supplies 5. Other power circuits
Coating Extensionon Lead : to line A
10.0
max
.3.
5±1.
0
NTPAN : 23.0 max.NTPAJ : 20.0 max. 5.5 max.
10.0±1.5
ø0.8±0.05Sn plated Cu wire
A
(in mm)
NTPAN/NTPAJ Series
Coating Extensionon Lead : to line A
10.0
max
.3.
5±1.
0
NTPAD : 16.0 max.NTPAA : 12.0 max.
5.5 max.5.0 max.
7.5±1.5
ø0.8±0.05Sn plated Cu wire
A
(in mm)
NTPAD/NTPAA Series
Coating Extensionon Lead : to line A
6.0
max
.3.
5±1.
0
NTPA7 : 9.0 max.NTPA9 : 11.0 max.
5.0 max.
5.0±1.5
ø0.6±0.05Sn plated Cu wire
A
(in mm)
NTPA7/NTPA9 Series
Part NumberResistance
(25°C)(ohm)
Permissible Max.Current (25°C)
(A)
Permissible Max.Current (55°C)
(A)
Thermal TimeConstant (25°C)(s)
Thermal DissipationConstant(mW/°C)
PermissibleElectrolytic Capacitor
(µF)
NTPAN3R0LDKB0 3.0 ±15% 5.4 4.7 135 26.8 8600 at 100V
NTPAN4R0LDKB0 4.0 ±15% 4.7 4.1 130 26.8 8600 at 100V
NTPAN6R0LDKB0 6.0 ±15% 3.9 3.4 130 26.8 8600 at 100V
NTPAJ4R0LDKB0 4.0 ±15% 4.0 3.5 125 21.8 5000 at 100V
NTPAJ6R0LDKB0 6.0 ±15% 3.4 2.9 125 21.8 5000 at 100V
NTPAJ8R0LDKB0 8.0 ±15% 3.0 2.6 130 21.8 5000 at 100V
NTPAJ100LDKB0 10.0 ±15% 2.6 2.2 130 21.8 5000 at 100V
NTPAD3R9LDNB0 3.9 ±15% 3.3 2.9 65 18.2 2700 at 100V
NTPAD5R1LDNB0 5.1 ±15% 3.0 2.6 85 18.8 2700 at 100V
NTPAD8R0LDNB0 8.0 ±15% 2.7 2.3 65 18.7 2700 at 100V
NTPAD160LDNB0 16.0 ±15% 2.0 1.7 100 19.1 2700 at 100V
NTPAA2R2LDNB0 2.2 ±15% 3.7 3.2 70 13.5 1400 at 100V
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
30
7
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part NumberResistance
(25°C)(ohm)
Permissible Max.Current (25°C)
(A)
Permissible Max.Current (55°C)
(A)
Thermal TimeConstant (25°C)(s)
Thermal DissipationConstant(mW/°C)
PermissibleElectrolytic Capacitor
(µF)
Continued from the preceding page.
NTPAA3R9LDNB0 3.9 ±15% 2.7 2.3 70 13.5 1400 at 100V
NTPAA5R1LDNB0 5.1 ±15% 2.5 2.2 70 13.5 1400 at 100V
NTPAA8R2LDNB0 8.2 ±15% 2.0 1.7 70 13.5 1400 at 100V
NTPAA100LDNB0 10.0 ±15% 1.7 1.5 70 13.5 1400 at 100V
NTPA9160LBMB0 16.0 ±15% 1.4 1.2 65 11.6 800 at 100V
NTPA74R0LBMB0 4.0 ±15% 2.3 2.0 40 9.4 700 at 100V
NTPA78R0LBMB0 8.0 ±15% 1.7 1.5 40 9.5 570 at 100V
NTPA7160LBMB0 16.0 ±15% 1.2 1.0 40 9.9 400 at 100V
NTPA7220LBMB0 22.0 ±15% 1.0 0.88 40 9.1 400 at 100V
NTPAD/NTPAA/NTPA7 series are also availabe on tape.
Application Circuit
NTC
−t˚
−
+
Determination of Allowable Current
Max
. Cur
rent
Rat
io
1.0
0
0.5
Ambient Temperature (˚C)20 40 60 80 100 120 140 160
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
Current-R Ratio (RT/R25) / Current-Temperature Characteristics (Typical)
31
7
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NTPAN3R0L Type
0.01 0.1
Current (A)
Ta=25˚C
1 10
Resistance RatioThermistor's Temperature (˚C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(˚C
)
NTPAN4R0L Type
0.01 0.1
Current (A)
Ta=25˚C
1 10
Resistance RatioThermistor's Temperature (˚C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(˚C
)
NTPAN6R0L Type
0.01 0.1
Current (A)
Ta=25˚C
1 10
Resistance RatioThermistor's Temperature (˚C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(˚C
)
NTPAJ4R0L Type
0.01 0.1
Current (A)
Ta=25˚C
1 10
Resistance RatioThermistor's Temperature (˚C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(˚C
)
NTPAJ6R0L Type
0.01 0.1
Current (A)
Ta=25˚C
1 10
Resistance RatioThermistor's Temperature (˚C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(˚C
)
NTPAJ8R0L Type
0.01 0.1
Current (A)
Ta=25˚C
1 10
Resistance RatioThermistor's Temperature (˚C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(˚C
)
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
Current-R Ratio (RT/R25) / Current-Temperature Characteristics (Typical)
32
7
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
NTPAJ100L Type
0.01 0.1
Current (A)
Ta=25˚C
1 10
Resistance RatioThermistor's Temperature (˚C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(˚C
)
NTPAD3R9L Type
0.01 0.1
Current (A)
Ta=25˚C
1 10
Resistance RatioThermistor's Temperature (˚C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(˚C
)
NTPAD5R1L Type
0.01 0.1
Current (A)
Ta=25˚C
1 10
Resistance RatioThermistor's Temperature (˚C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(˚C
)
NTPAD8R0L Type
0.01 0.1
Current (A)
Ta=25˚C
1 10
Resistance RatioThermistor's Temperature (˚C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(˚C
)
NTPAD160L Type
0.01 0.1
Current (A)
Ta=25˚C
1 10
Resistance RatioThermistor's Temperature (˚C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(˚C
)
NTPAA2R2L Type
0.01 0.1
Current (A)
Ta=25˚C
1 10
Resistance RatioThermistor's Temperature (˚C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(˚C
)
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
Current-R Ratio (RT/R25) / Current-Temperature Characteristics (Typical)
33
7
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
NTPAA3R9L Type
0.01 0.1
Current (A)
Ta=25˚C
1 10
Resistance RatioThermistor's Temperature (˚C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(˚C
)
NTPAA5R1L Type
0.01 0.1
Current (A)
Ta=25˚C
1 10
Resistance RatioThermistor's Temperature (˚C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(˚C
)
NTPAA8R2L Type
0.01 0.1
Current (A)
Ta=25˚C
1 10
Resistance RatioThermistor's Temperature (˚C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(˚C
)
NTPAA100L Type
0.01
0.1
1
10
0.01 0.1 1 10
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
tem
pera
ture
(°C
)
1
10
100
1000
Resistance RatioThermistor's Temperature
Ta=25°C
Current (A)
NTPA9160L Type
0.01
0.1
1
10
0.01 0.1 1 10
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
tem
pera
ture
(°C
)
1
10
100
1000
Resistance RatioThermistor's Temperature
Ta=25°C
Current (A)
NTPA74R0L Type
0.01 0.1
Current (A)
Ta=25˚C
1 10
Resistance RatioThermistor's Temperature (˚C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(˚C
)
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
Current-R Ratio (RT/R25) / Current-Temperature Characteristics (Typical)
34
7
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
NTPA78R0L Type
0.01 0.1
Current (A)
Ta=25˚C
1 10
Resistance RatioThermistor's Temperature (˚C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(˚C
)
NTPA7160L Type
0.01 0.1
Current (A)
Ta=25˚C
1 10
Resistance RatioThermistor's Temperature (˚C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(˚C
)
NTPA7220L Type
0.01 0.1
Current (A)
Ta=25˚C
1 10
Resistance RatioThermistor's Temperature (˚C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(˚C
)
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
for Inrush Current Suppression Lead Type !Caution/Notice
35
7
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution (Storage and Operating Conditions)1. This product is designed for the Switching Power Supply with smoothing capacitors. Other applications of this product may result in fire.2. Use this product within the specified maximum current. Otherwise it may catch fire in the worst case.3. Use this product with smoothing capacitor within the specified maximum capacitance value. Otherwise it may catch fire in the worst case.4. This product is designed for application in an ordinary environment (normal room temperature, humidity and atmospheric pressure). Do not use under the following conditions because
all these factors can deteriorate the product characteristics cause failure and burn-out. (1) Corrosive gas or deoxidizing gas. (Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) Volatile or flammable gas (3) Dusty conditions (4) Under high or low pressure (5) Wet or humid conditions (6) Near with salt water, oils, chemical liquids or organic solvents (7) Strong vibrations (8) Other places where similar hazardous conditions exist.
!Caution (Others)Be sure to provide an appropriate fail-safe function on your product to prevent secondary damages that may be caused by the abnormal function or the failure of our product.
Notice (Storage and Operating Conditions)To keep solderability of product from declining, the following storage condition is recommended.1. Storage condition: Temperature -10 to +40 degree C Humidity less than 75%RH (not dewing condition)2. Storage term: Use this product within 6 months after delivery by first-in and first-out stocking system.
3. Handling after unpacking: After unpacking, reseal product promptly or store it in a sealed container with a drying agent.4. Storage place: Do not store this product in corrosive gas (sulfuric acid gas, chlorine gas, etc.) or in direct sunlight.
Notice (Rating)Use this product within the specified temperature range.Higher temperature may cause deterioration of the characteristics or the material quality of this product.
Notice (Soldering and Mounting)1. Be sure that the preheat-up does not melt the soldering of this product. Excessive heat may cause failure to open, short or insulation break down.2. Do not touch the body with soldering iron. The soldering point should be min. 5mm away from the root of lead wire.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
for Inrush Current Suppression Lead Type !Caution/Notice
36
7
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice (Handling)1. When this product is operated, temperature of some area may be about 160 (degree C). Use proper surrounding parts and material which withstand such temperature. If they are inadequate and kept at high temperature for long time, they may be deteriorated or may produce harmful gas. And, such harmful gas may deteriorate the element of this product.2. This product does not have waterproof construction. Splashed water may cause failure mode such as deterioration of characteristics or current leak. So, do not apply cleaning to immerse it into water or any solvent.
3. The ceramic element of this product is fragile, and care must be taken not to load an excessive press-force or not to give a shock at handling. Such forces may cause cracking or chipping to the element.4. Do not apply an excessive force to the lead wire. Otherwise, it may cause break off junction between lead wire and element, or may crack element. So, fix lead wire of element side when lead wire is bent or cut.
Notice (Others)1. This products need sufficient cool off time to recover high resistance. Repeated ON-OFF may cause over specified current rating. Make sure inrush current do not exceed the specified ratings even at the worst condition. (maximum ambient temperature and the shortest off time.)2. The resin coating of this product does not guarantee insulating. Keep an adequate insulating distance to surrounding parts.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
for Inrush Current Suppression Lead Type Package
37
7
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Minimum Quantity
Part NumbersMinimum Quantity (pcs.)
BulkAmmo Pack
NTPA7 1000 100
NTPA9 1000 100
NTPAA 750 100
NTPAD 400 100
NTPAJ - 100
NTPAN - 100
Taping Dimensions (NTPAD/NTPAA Series)
Pitch of Component
Pitch of Sprocket Hole
Lead Spacing
Length from Hole Center to Lead
Length from Hole Center to Component
Body Diameter
Deviation along Tape, Left or Right
Carrier Tape Width
Position of Sprocket Hole
Lead Distance between Reference and Bottom Planes
Height of Component
Overflow of Lead
Diameter of Sprocket Hole
Lead Diameter (Sn-Plated Cu Wire)
Total Tape Thickness
Total Thickness, Tape and Lead Wire
Deviation across Tape
Portion to cut in Case of Defect
Hole Down Tape Width
Hole Down Tape Position
Coating Extension on Lead
P
P0
F
P1
P2
D
∆S
W
W1
H0
H2
I
D0
d
t1
t2
∆h1, ∆h2
L
W0
W2
e
30.0
15.0±0.3
7.5±0.5
7.5±1.5
3.75±1.0
(refer to the table below)
Thickness T (refer to the table below)
±2.0
18.0±0.5
16.0±0.5
10.0 max.
W0.5 to Y6.0
4.0±0.1
0.8±0.05
0.6±0.3
2.0 max.
2.0 max.
11.5 min.
4.0 max.
to line A
CodeItem Dimensions (mm)
9.0±0.5
11.0+0–2.0
NTPAD
NTPAA
Type D T
16.0 max. 5.5 max.
12.0 max. 5.0 max.
W0
W2
W
W1
H0
H2
∆h2∆h1
e
∆SP2 P
D
P1
P0
F d
l
øD0
L
t2 t1
T
A
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
for Inrush Current Suppression Lead Type Package
38
7
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
Taping Dimensions (NTPA7/NTPA9 Series)
Pitch of Component
Pitch of Sprocket Hole
Lead Spacing
Length from Hole Center to Lead
Length from Hole Center to Component
Body Diameter
Deviation along Tape, Left or Right
Carrier Tape Width
Position of Sprocket Hole
Lead Distance between Reference and Bottom Planes
Height of Component
Overflow of Lead
Diameter of Sprocket Hole
Lead Diameter (Sn-Plated Cu Wire)
Total Tape Thickness
Total Thickness, Tape and Lead Wire
Deviation across Tape
Portion to cut in Case of Defect
Hole Down Tape Width
Hole Down Tape Position
Coating Extension on Lead
P
P0
F
P1
P2
D
∆S
W
W1
H0
H2
I
D0
d
t1
t2
∆h1, ∆h2
L
W0
W2
e
12.7
12.7±0.3
5.0
6.35±1.3
3.85±0.8
(refer to the table below)
Thickness T 5.0 max.
±1.5
18.0±0.5
16.0±1.0
6.0 max.
W0.5 to Y4.0
4.0±0.3
0.6±0.05
0.6±0.3
2.0 max.
1.5 max.
11.0 min.
4.0 max.
to line A
CodeItem Dimensions (mm)
9.0
11.0+0–2.0
+0.8–0.3
+0.5–0.75
W0
W2
W
W1
H0
H2
∆h2∆h1
e
∆SP2 P
D
A
P1
P0
F d
l
øD0
L
t2 t1
T
Type D
11.0 max
9.0 max.
NTPA9
NTPA7
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R44E9.pdf 05.4.13
Note:1. Export Control
<For customers outside Japan>No muRata products should be used or sold, through any channels, for use in the design, development, production, utilization, maintenance or operation of, orotherwise contribution to (1) any weapons (Weapons of Mass Destruction (nuclear, chemical or biological weapons or missiles) or conventional weapons) or (2)goods or systems specially designed or intended for military end-use or utilization by military end-users.<For customers in Japan>For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is requiredfor export.
2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especiallyhigh reliability for the prevention of defects which might directly damage a third party's life, body or property, or when one of our products is intended for use inapplications other than those specified in this catalog.q Aircraft equipment w Aerospace equipmente Undersea equipment r Power plant equipmentt Medical equipment y Transportation equipment (vehicles, trains, ships, etc.)u Traffic signal equipment i Disaster prevention / crime prevention equipmento Data-processing equipment !0 Application of similar complexity and/or reliability requirements to the applications listed above
3. Product specifications in this catalog are as of January 2005. They are subject to change or our products in it may be discontinued without advance notice.Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives orproduct engineers.
4. Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications ortransact the approval sheet for product specifications before ordering.
6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effectof our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described orcontained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentionedabove under licenses without our consent.
7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process.
International Division3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: [email protected]
Head Office1-10-1, Higashi Kotari, Nagaokakyo-shi, Kyoto 617-8555, JapanPhone: 81-75-951-9111
http://www.murata.com/
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note R44E9.pdf 05.4.13