nscp-w62

485
Page 1 NSCP-W62 Navigation & Audio book CRA4803-A <1> Introduction Basic operation Basic navigation operation Search Root Registration and editing operation Use of various types of information Setting of navigation Audio Basics It wants to receive a broadcast Use music disk Use the SD card Use the Bluetooth Audio Use the AUX Setting Audio Use the camera function Other operations Appendix Page 2 Two CRA4803-A <2> Precaution (Please be sure to observe in order to Safety) In order to prevent damage to you or harm or property to other people, and explain that you get sure to observe It is doing.

description

nscp w62

Transcript of nscp-w62

Page 1

NSCP-W62Navigation&Audio bookCRA4803-A IntroductionBasic operationBasic navigation operationSearchRootRegistration and editing operationUse of various types of informationSetting of navigationAudio BasicsIt wants to receive a broadcastUse music diskUse the SD cardUse the Bluetooth AudioUse the AUXSetting AudioUse the camera functionOther operationsAppendix

Page 2

TwoCRA4803-A Precaution(Please be sure to observe in order to Safety)In order to prevent damage to you or harm or property to other people, and explain that you get sure to observeIt is doing.Ignore the display contents , the degree of danger and damage to exert upon the wrong use pieces divided in the next displayIt is, are described.CaveatIt is a "content a person is assumed could result in death or serious injury."NoteThe occurrence of only the contents and property damage slightly injured possibility is assumed "human assumptionThe contents "to be. the type of failure to observe the precautions are classified in the following picture display, are described.Note (including a warning) The contents that must be.The contents of the Force where I am be sure.The contents of the prohibited (doing it should not be).MN-001-002Connection and mountingCaveatBanThis machine is DC12V grounded vehicles onlyPlease do not use in 24V vehicles.Fire and lateIt becomes the cause of the disabled.In place to interfere with the operation of the air bagIs not an absolute to the mounting wiringIf you are installing the air bag equipped car, the vehicleWe will continue to check the notes on the work of the manufacturerPlease.Air bag malfunctions, of fatal accidentIt may cause.Place to prevent the forward visibility and driving operationPlace, in a location that is hazardous to passengerI am not attached to the absoluteIt becomes the cause of traffic accidents and injuries.Turn off the coating of the power cord, otherDo not take the power of equipmentIf the current capacity of the power cord is over, fireDisaster or electric shock, it may cause malfunction.The mounting safety parts (stearicRing, brake, volume of the tank, etc.)Belt and nut are not used to the absoluteIf you use these, braking inability or fire, trafficThe cause of the accident.CaveatBanThe antenna, in order to meet safety standards NaYou can paste the stomach place, with re-pastePaste in the only and general-purpose of double-sided tapeNot orPeeling poor visibility and the antenna is, the cause of the accidentIt becomes.ForcingMounting and wiring, change the mounting location, cheapTo ask your dealer for allThe mounting and wiring and removal, expertise and experienceIs required.incorrect installation and wiring, removeIf you have teeth, if you cause a serious hindrance to the carI have.In addition, the mounting and by yourselfWiring can cause injury.Work before I remove the terminal of the batteryThe short of and route, electric shock or injuryIt may cause.Before work, pipes, tanks, electricalIt will confirm the position of such wiringIf you are installing to a hole in the vehicle body, pipeDo not interfere, contact with and Louis tank electrical wiringPlease note strangely.In addition, the processing of the servicePlease perform the treatment of bi-stop and flood prevention.

Page 3

ThreeIntroductionCRA4803-A CaveatForcingBe sure to use the supplied parts, surelyFixIf you use other than the supplied parts, equipment internal partsAnd damage the goods to the outside can not be securely fastenedIt is to become a hindrance of operation, and cause of the accident or injuryWill.You want to connect and installed in accordance with instructionsWhen you make a connection, attached to not follow the instructions,It may cause a fire or failure.The coating is not part of the code tapeInsulation, etc.By short-circuiting, fire or electric shock, and the cause of failureWill.Body and threaded portion, a seat railDo not sandwiched between the code which the moving partsThe wiring will IyoBy disconnection or short circuit, fire or electric shock, of failureIt may cause.If cords and interfere with driving operationFixed so as notSteering and selector lever, brake pedalWhen wrapped around such as Le, it becomes the cause of the accident.After installing the wiring is complete, powerMake I see goods to work restored successfullyBe sureWhen used in a state that does not work properly, and Ya fireElectric shock, it will cause a traffic accident.Small parts such as screws, of infantsStore out of the reach of handIf swallowed, immediately phase to doctorPlease be Dan.NoteBanHot air of direct sunlight or heater directlyit is not attached to the location where you hitThe internal temperature will rise, and cause a fire or failureThere is a thing.Preparative unstable the antenna and monitorIt is not attached to a timeIt may cause such as dropping.Do not block the vents and heat dissipation plateInternal heat build up to, and cause a fire or failureThere is a thing.Cords are not cut in the middle of absolutelyAnd if the cords that with fusesSome reason, no longer work protection circuit, fireIt may cause.NoteBanWiring of the cords, the body of the high-temperature portionIt is not brought into contact with theIt may cause a fire or electric shock.Products shipped with power leads, backIt is not directly connected to TerryIt may cause a fire or electric shock.Current is insufficient, the power directly from the batteryIf you take, you will use a dedicated wiring kitPlease.It is not a branch wiringCable is heated, it is a fire and electrical shock hazardThere is Rukoto.place and water and condensation that rain blows, dustRi, in the place where such as soot is mixedIt is not installedSmoke or fire, it may cause a malfunction.ForcingSo that code does not touch the metal partsWireA damaged power cord is in contact with metal parts, fireOr electric shock, it may cause a malfunction.Antenna and camera before and after the car width and carIt is mounted in a location that does not protrude from theIn contact with, such as a pedestrian, and the cause of the unexpected accidentIt may become.Write pull the antenna code or the like in the carNo case, be aware of the infiltration of rainwaterIf rainwater is entering the car, the cause of fire or electric shockIt may become.How to useCaveatBanDriver not operate while drivingIt might cause a traffic accident becomes a front carelessnessVinegar.Is operation after stop in safe placePlease be.The driver does not watch the image while drivingIt may cause a traffic accident becomes a front carelessness.It is a retreat operation and screen to increase the speedDo not retreat operation of while watching the onlyVideo back camera uses a wide-angle lensIt has.Since the actual distance and the feeling is different,There is a possibility that the hit to the people and things.In addition,Not be retracted while confirms safe visualPlease be.People who have become blind spot of the cameraThere is a possibility that the hit on and things, an unexpected accident originalIt becomes the cause.

Page 4

FourCRA4803-A CaveatBanHand or fingers in the media insertion slot, the foreign matterNot putInjury or electric shock, it may cause a fire or failure.It is not wetted with liquidIt may cause smoke or fire or electric shock.In particularPlease note that in families with children.Screen is not displayed, no sound, voiceAbnormal and failures, such as it is broken, distortedDo not use the stateunexpected accident, fire, or may cause electric shock.NO contactIf thunder is heard, antenna codeDo not touch the soil and the machineThere is a risk of electric shock from lightning.DisassembleDo not disassemble or modifyTraffic accidents and fire, it may cause electric shock.ForcingRun in accordance with the actual traffic regulationsOnly to route guidance by the navigationTherefore, when traveling, it is contrary to the actual traffic regulationsThere is a case, it will cause a traffic accident.When the driver watch TV and videoHuang, parking blanking be sure to stopBet the rakeTV and video, while driving for safety displayIt will not be.When replacing the fuse, be sureProvision capacity fuses (amps)To useIf you use a fuse that exceeds regulated capacity, fireIt becomes the cause of the disaster and failure.NoteBanThis machine is not used except for automotiveSmoke or fire, it may cause electric shock or injuryThere.Do not touch the heat radiating portion of the amplifierIt may cause burns.ForcingDegree volume, the outside of the sound can be heardIt used to inWhen driving in a state in which the outside of the sound is not heard, exchangeIt may cause accidents through.NoteInjury of fingerNoteThe hand at the time of monitoring of the storage and angle adjustmentIt will be careful not to pinch your finger orIt may cause injury.Abnormal time of inquiryCaveatForcingIn the unlikely event abnormality occurs, immediatelyDiscontinue use, Sir always resellerConsult the screw consultationContinuing to use the unexpected accident or fire-sensitiveIt becomes the cause of the power.

Page 5

FiveIntroductionCRA4803-A IntroductionSafety Precautions ................................. 2Book How to read .................................. 11How to book conventions ......................... 11Please read .............................. 12Attention to customers ............................. 12......................... 12 for operation of the machineOf 3D hybrid sensorFor automatic learning ......................... 12In order to prevent the battery up of the car ... 12If you remove the battery terminalAbout reconfigured ............................. 12About SD Memory Card ............. 13For LCD screen ............................. 13For map data ......................... 13For customers of the registered data ... 13Copyright ................................................ . 14For security functions .............. 14Other ................................................. 14QUICK SETUP ............................ 15Perform QUICK SETUP .................... 15............ 15 to start the QUICK SETUPPreparation .............. 19 for watching TVBasic operationPart Names and Functions .................. 20Navigation body(State closed the screen monitor) ....... 20Navigation body(State opened the screen monitor) ....... 20Steering switch(Vehicles only) .................................. 21You are here screen touch key .................. 21Basic Operations .......................................... 22To operate the touch panel .................. 22Operating in button ............................. 23Screen switching how ......................... 23...... 24 to adjust the angle of the screen monitorTo adjust the image quality ................................. 25Operation of the list screen ............................. 25Disk out of ......................... 26And out of the SD card ....................... 28Character input operation .............................. 30.......... 30 to switch the method of character inputFlow of character input operation ...................... 30To switch the type of character .................. 30Enter the character ................................. 31No conversion, conversion is carried out ........................... 33To end the character input ......................... 33Symbol can be kana-to-kanji conversion .................. 34Table of contents

Page 6

SixTable of contentsCRA4803-A Basic navigation operationNavigation of the basic operation ........... 35Operation of the navigation menu ......................... 35Operation of the shortcut menu ...... 38Map screen of the operation .............................. 39To display the current position screen ...................... 39To move the map (scroll) .............. 40To change the scale of the map .................. 41To change the display method of map .................. 41To change the orientation of the map ......................... 42The passage display 100m scale whileThe ON / OFF to ................................ 43The ON enlarged display of character / OFF to ..... 44Register the scale ......................... 44To the display settings of the logo mark ............ 44Show coordinate ................................. 46About side map ...................... 46Safety Information ...... 48About e start guide ................... 48About screen that is displayed while driving .... 49For highway mode .............. 50To return to the home ...................................... 54To register the home ................................. 54To route search to your home .................. 54SearchLocation Find ...................................... 55Search by map ......................................... 55Search by name ......................................... 55Search by Address ......................................... 56Search by genre ................................. 57Find surrounding facilities ................................. 57Search by telephone number ................................. 59Find from the registration areas ................................. 59Find from the search history ............................. 60Search by map code ...................... 60Find an easy destination search .............. 61View detailed information .............................. 62Root.......................... 63 to explore the rootRoute guidance start screen How to read .......... 64...... 65 to confirm the root profile............................. 65 to choose the other routeShow route map ...................... 66...................... 66 for a detailed route settingFor route search function .................. 69Root induction and Information .......................... 70You are here screen during route guidance .............. 70The induction by voice-guidance ...................... 73Operation during route guidance and function ........... 76When you deviate from the routeAutomatically re-explore the route ...... 76The new route according to the situationThe proposed ......................................... 76And to guide the traffic jam information on the route ... 77Route information of operation ... 77.......................... 78 to edit the routeCheck the root profile ...... 78And to re-explore the route by changing the conditions ... 78To clear the route ............................. 79......................... 79 to postpone a stop-off placeIt is confirmed by demonstration run ......................... 79.......................... 80 to clear the route

Page 7

SevenTable of contentsIntroductionCRA4803-A Registration and editing operationTo register the location .............................. 81To register the location ................................. 81.......................... 83 to edit the registered location.......... 83 to edit the contents registered in the registration areaTo erase the registered location ............................. 84............................. 85 to migrate the registered locationTo edit other data ........... 87To clear the search history ......................... 87To erase the learning contents of the root .......... 87......................... 88 to erase the traveling locusUse of various types of information............ 89 to use the FM-VICS informationThe VICS information ................................... 89View VICS information on the map ............... 90And to guide the traffic jam information on the route ... 91View characters and graphics information of VICS ........ 92..................................... 93 to select a broadcast stationTo use the ETC information ..................... 94................. 94 to display the ETC usage history................. 94 to display the ETC registration informationTo perform the ETC setting ................................ 95....... 96 for use of the vehicle maintenanceSet the time to replace, such as consumables ... 96................................. 97 Advanced SettingsNotice confirmation screen ............................. 97Use of other information ...................... 98.......... 98 to check the serial numberSensors to see the learning situation .................. 98......................... 99 to check the connection status........ 100 to confirm the data versionSetting of navigation........................... 101 for the function settingsSettings of detail .............................. 102............... 106 for the Bluetooth settingBluetooth equipment Precautions ... 106To perform the Bluetooth settings .............. 106The volume of the navigationSet to ................................... 111.............................. 111 to the volume settingsTo a guide / Phone Speaker setting ... 111Set the vehicle information ................... 113Toll classification setting of ............... 113Setting of parking restriction (model) .................. 113Setting of parking restriction (vehicle size) .......... 114................... 115 for other settings........... 115 to correct the deviation of the vehicle position........... 115 to switch the road while drivingSetting the Security ............... 116Show slide frame ................... 119To return the set to the initial state ................... 119

Page 8

EightTable of contentsCRA4803-A Audio BasicsAudio Basic Operations ............... 121Show AV source screen ............. 121To switch the AV source ................ 121............... 122 for the AV source to OFF..... 122 to adjust the volume of the audioVideo screen clock display setting ................... 123The reception of the emergency warning broadcasting (EWS)and about to .......................................... 123And renewable media on this unitFile Type .......................... 123It wants to receive a broadcastListen to the radio ............................... 124Receiving a radio broadcast ............... 124The frequency scale display screento switch .................................. 124............... 125 to choose the type of preset...................... 125 to switch the band............... 125 to register the broadcast stations manuallyBroadcast stations automatic registration .......................... 126To listen to the traffic information ........................... 127To receive traffic information ...................... 127View one-segment broadcasting ................... 128To receive one-segment broadcasting ............... 128And switches the presets ... 129............... 130 to register the broadcast stations manuallyTo switch the service ................... 130.......................... 130 to display the program guideTo display the program contents ...................... 131Registered in the automatic radio stations(Channel scan) ................ 131.......................... 131 to switch subtitles.......................... 131 to switch the voice........... 132 for the function setting of one-segmentUse music diskListening to music CD ............................ 133Playback .......................................... 133Play by selecting from a list ........... 134Repeat Play .................................. 134Random play .................................. 134CD-R / RW the (WMA / MP3)Listen .......................................... 135Playback .......................................... 135Play by selecting from a list ........... 136Repeat Play .................................. 136Random play .................................. 136Use the SD cardHow to SD of operation ..................... 137Playback .......................................... 137Play by selecting from a list ........... 138Repeat Play .................................. 138Random play .................................. 139Use the Bluetooth AudioOf Bluetooth AudioHow to operate ........................... 140Registration of Bluetooth Audio equipment ...... 140Playback .......................................... 140Play by selecting from a list ........... 142Repeat Play .................................. 142Random play .................................. 142Of Bluetooth Audio equipmentFor connections .............................. 143

Page 9

NineTable of contentsIntroductionCRA4803-A Use the AUXUsing the AUX ................................. 144To listen to the voice of external equipment ................... 144Setting Audio........... 145 for a set of audioFader / balance setting ............ 145Loudness setting .............................. 146Equalizer settings .......................... 146Source level adjuster setting ... 147Mute setting .......................................... 148Use the camera functionUsing the back guide monitor .... 149The back guide monitorNote point of about .......................... 149Notes on camera ................... 149Select the guide way how ................... 150To the back guide monitor screenSwitching ...................................... 151For range reflected in the screen ............... 151Parallel parking(Course display mode) ....................... 152Parallel parking(Parking guide line display mode) ........ 155To parallel parking(Column guide mode) .................... 157To parallel parking(Parking guide line display mode) ........ 166Error between the actual road surface and screen ........... 168Notes when the three-dimensional object is near ... 169Setting the column guide of volume ............... 170Display of the beginning of the tips ...................... 171Display of the parking guide line ...................... 171It is displayed during system initializationWhen it comes .................................. 172Battery of desorption, orWhen it was replaced put this unit ........... 172Using the back monitor ............... 173Back monitor of the video ................... 174Error between the actual road surface and screen ........... 176Other operationsUsing a mobile phone ........................... 178............... 178 to the hands-free phone callReceived phone how .............................. 178Phone Kake-kata .............................. 179Operation of a call in the menu ................... 181Edit the mobile phone information ............... 182........... 185 to use the Eco-ManagerFor eco-driving evaluation ................... 185Eco prize and ................... 186.............................. 186 to the fuel consumption setUse personalization features ... 187Show personalized screen ... 187...................... 188 Setting the UserUsing the user switching menu ... 191Using the smartphone cooperation function ... 193Using the NaviCon app ................. 193Using the smart nAVVi Link app ... 194Of the touch panel........... 196 to adjust the touch position

Page 10

TenTable of contentsCRA4803-A AppendixHandling Precautions ................... 197Correct use of the LCD screen how ........... 197Correct use of a disk-type ........... 197Correct use of SD card-type ......... 198Notices radio ...................... 199For disk ....................... 200Type of disc that can be played ........... 200The configuration of the disk ............... 200WMA / MP3 / AAC /About WAV files ............ 201Folders and WMA / MP3 / AAC /About WAV files .............. 201The WMA?.................................... 201And MP3?.................................... 202The AAC?..................................... 203And WAV?.................................... 203Navigation mechanisms ........... 204How You are here can be seen ................... 204Mechanism for increasing the positioning accuracy ... 204For error is .................................. 205Failure kana?If you think ............... 207Common items .......................................... 207Navigation .............................. 207Audio ...................................... 208ETC ................................................. 212For reset ......................... 213About body reset ................... 213About sensor reset ........... 213VICS information pay broadcastingService Agreement ................... 214Other information ............................... 216In SearchFor database ................ 216Note about the root matters ............... 216Notes on VICS information matters ......... 218City map (detailed city map)Recording area .................................. 218From the Hanshin Expressway Co., Ltd.Contact .......................................... 219For recording database ........... 219For after-sales service ........ 221Specifications ............................................. 222Such as trademark and copyright ....................... 223Index .............................................. 225Menu index .................................. 225Concordance .......................................... 227Symbol marks list ....................... 235

Page 11

ElevenIntroductionCRA4803-A How to book conventionsSignageMeaningInstruction markOperation or the like will be noted in the context of performing, in order to maintain the performance of the productIt describes the fact that I would like you to observe.MemoThe operation on It should be noted and with that hint, describes such convenient ways you can use.Go backIt represents the touch key.Example:Touch toreturn slideIt represents the slide operation.For example, it will be referred to as " slide" the slide operation to the left.It represents a button that is attached to the navigation body.Example: press the (menu) italicI would like you to see text and title page or will lead to other instructions,.Example: "find the location."(P55)Long press /I long touchIt indicates to press the (touch) it until you hear a "beep".Press continue /Continue to touchPress and are only between (being touched) it indicates that it is operating.MemoIn this manual, SD memory card, are collectively referred to SDHC memory card is being referred to as "SD card".Illustrations and screen examples you use in this book, it may be different from the actual product.Screen of the actual product, due to the performance and functional improvement, it may be subject to change without notice.Proper nouns, such as product names that are mentioned in this document are trademarks or registered trademarks of their respective owners.This book of how to view

Page 12

TwelveCRA4803-A Please readAttention to customersOf emergency facilities (hospital, fire station, police station, etc.)For search and route guidance, and in each facilityPlease check directly.This unit, the parking brake ON / OFFBy detecting, by watching the video of the TV while drivingIt is so could not have been.It issues a navigation operations and diskWhen you put in, stop the car in a safe placeIs allowed to, the car of the select lever N (NewTral) or to the P (parking) position, PerIt goes carried out from over the parking brakeSai.The Kappuhoru when the monitor part of the unit is openContainers such as juice and placed in Zehnder interferenceyou might want to.Intelligent key is attachedIn the car, the intelligent key to the machineOr it may no longer work as closeSince you, please be careful.If this unit was replaced put on another car, ifClause is installed in your car in a location other than the Toyota dealerIf you gave Ri, sure, such as setting dealer alwaysPlease do the certification.For operation of the machineThis machine, the touch panel and the body of the button HoyoIn fine steering switch (vehicles only)To manipulate.Of 3D hybrid sensorAutomatic learningThis unit, each overlapping the traveling, 3D hiveAutomatic learning of the lid sensor advances, positioningWe are increasing accuracy.The explosion of the battery rise of carTo GutameWhen it comes to you use this machine, be sure of the car enPlease over gin.It is multiplied by the engineWhen you use the machine when it is not, batteryLee is exhausted.MemoFor environmental protection, it parked more than necessary idlyIng should be avoided.Place to remove the battery terminalFor re-setting of the caseIf you remove the battery terminal in the maintenance, such as,If the setting of each function has returned to the factory stateBecause there is, please set again.Other features that your own has been set have anyOnce Mashi goods, again set with reference to each pagePlease refer to the constant.

Page 13

13IntroductionCRA4803-A About SD memory cardIn the text, SD memory card andThe SDHC memory card, convenience, "SDIt is referred to as card ".This machine, SD card and SDHC cardIt supports (up to 32 GB).It also ensures the operation of all of the SD cardThere is no than.During access to the SD card, SD cardPlease do not remove the.In addition, car keysPlease do not change the switch position.There is a possibility that the data may be damaged.TheIf it is damaged in the act, such as, compensationYou ca n't.SD card has a limited service life.Normally usedand such as iodide also have successfully writing and erasingThere are times when it is no longer the operation.SD we are recognized by you have a personal computerIf the card is, it is not recognized in rare cases this unitI have.In this case, the SD card notDepending on the condition, dedicated to formatAnd certified by formatting toolYou may want to identify.In addition, personal computerSD When you format a standard feature ofTo become a non-compliant format, DayCan other write or read, it isKotogaa that problems such as not occurSince Ri you, in a dedicated format softwareIt recommended that you perform the format operationAre we.However, if you format, SDData recorded on the card are all lostYou.During the format, be sure SD CarYou can create a backup of DodetaPlease go.SD card format softwareIs, of SD Association following HomeIt will be available than the page.https://www.sdcard.org/jp/Not of the SD card in the format workTo be construed as a guarantee by us the condition repairNo.Furthermore, the present work, the SD cardLoss of data, as well as, other damage occursIf you have, and not bear responsibility as ourIt does.And format software manualWell made and to read, to the end, yourFormat work in the original judgment and responsibilityPlease run.About the LCD screenLCD screen, the angle that looks on the structure cleanIt has been limited.When it is new, As screen look great, to see the cornerAnd be sure to adjust the black density in accordance with the timeThere.In addition, you can change the brightness of the LCD screenYou bet you can.And will be adjusted according to tastePlease.( P25)For map dataYou need to insert the map disc in the playerNo.The map data, the machine built-in memoryIt is recorded in.Customers of the registered dataAboutIn the repair of the machine, the customer has registeredWarranty of data, pardon KedahSai.Registered various functions to the navigationThe contents of such settings, accident or malfunction, repair ResonaPlace to be altered or lost by other handling ofThere is a case.Important contents taken us a copyRikudasai.Should content has changed or lostWith regard to damages and lost profits in the caseWe can not bear responsibility therefore absolutely, OhLuo advance, please understand.Please read

Page 14

14CRA4803-A CopyrightRecording data and programs to the machineCopyright, copyright for our company and ourIt was attributable to the third party that was granted the rights underCage you.Customers, any form smellEven if all of these data and programsReplicate or part, modified, and vinegar, such as analysisYou can not.The security featuresThis machine, security machines by passwordIt has a built-in function (theft deterrence function).OutLoad at the time of the security function is operating orTo do.Setting security functions as necessaryPlease be constant. "to the security settingsThat "(P116)OtherFor the purpose of performance improvement of product, in this unitTo record the operation history information (such as positioning result)It has the ability to.Contact the operation history informationPersonal information of the customers are not included.In addition,Base and the Company of this information our specificationIt can be analyzed only in the specified subcontractorsWe have become a mechanism, and have your consentIt will be used only if the only digits., Match this unit to your particular purposeIt does not guarantee that you.The appearance and specifications of the machine, the pre for improvementYou may want to change WARNING without.TheModification of the product before the change in the case, orThe other I do respond to request your replacementYou.The fact of the camera screen, the performance and functional improvementTherefore, it may be subject to change without notice.Screen example, the actual screen you are using in this bookAnd there are times when it is different.Please read

Page 15

FifteenIntroductionCRA4803-A QUICK SETUPThe basic configuration of the machine, it can be done easily in accordance with the instructions on the screen.After your purchase, you have not done and security settings when you begin using the machine for the first timeIf, automatically QUICK SETUP will start.The settings, change laterYou can also further.Do QUICK SETUPItems and order that can be set in the QUICK SETUPIt is as follows.Security SettingsSecurity of the navigation systemYou can set the utility.Volume settingsNavigation of the guide volume, earpiece volume, ringtoneYou can set the amount and operation sound.Home settingI can home of registration and change.ETC mounting state settingIt has installed a vehicle ETC equipment in the carYou can set up or not or.Bluetooth SettingsYou can register a Bluetooth device to this unitYou.Vehicle information settingCar toll classification and parking restrictions,Length, width, you can set the height.Fuel consumption setFuel consumption set of general roads and highwaysYou can.The fuel the set a number based onFee calculation is, to perform route searchWas when, less most fuel consumption LouTo display the door as eco routeRukoto I can.Personalization settingsUser icon, user name, AnneThe internal volume, operation sound, and map displayYou can be set on a per-user basis.Started QUICK SETUPMakeOneTo start QUICKSETUPtoTouchMemoIf you want to set a later time,and set at the next startuptoPlease Touch.Also next startupQUICK SETUP will start.In addition, the unitIf you from other startup you want to make the setting, (meshNew) -Setting and editing-QUICK SETUPfromThe settings can also be.Not setWhen you touch, QUICK SETUPThe is not carried out, to display the map screen.However, the backIf you have not done Kyuriti setting,SetNotyou can not touch to.During QUICK SETUP setting,to the nextI want to touch onTo the next setting,Previoussettings before you touch anYou can move to.ExitWhen you touch, the setting of up to that pointSave and QUICK SETUP Exit screen( P18)It will move to.Setting items other than the ETC mounting state setting, itIt is to be set individually from the Settings menuCan you.

Page 16

SixteenCRA4803-A Security SettingsTwoSecurity functionTouch to,Setting the Security ofMemoThe security settings to the setting of the passwordIs required. "Setting the Security"(P116)ThreeNextI want to touch onVolume settingsFour+or-,ONorOFFTouch and to set inAdjust the volume of the "guidance volume" navigation voice guidanceTo you."Beep"And set the ON / OFF of the operation sound of the machineYou constant."Earpiece volume" hands-free calls when the reception sound ofWe will adjust the amount.We will adjust the incoming volume of "Ring volume" phone.FiveNextI want to touch onSetting of homeSixHome registrationyou will touch onMemoIf you already have at home you are already registered,registration changeisIt will be displayed.Step TouchSevenTo go to,It can be overridden by changing the home locationYou.SevenLooking for a location ( P55),decisionIt will touch onEightNextI want to touch onSetting of ETC mounted stateNineTouch to choose the stateMemoWhen set to "is attached to the car", feature setConstant( P101)"Smart IC consideration route search" ofIt will automatically turn ON.In addition, of eitherEven when the set function setting( P101)Of"ETC lane guide display" will be changed to ON.During route guidance, you will not be able to set.TenNextI want to touch onQUICK SETUP

Page 17

17IntroductionCRA4803-A Bluetooth settingsElevenDevice registrationit will touch onTwelveTouch the device name to be connectedMemoIf the equipment to be connected is not in the list,the other party equipmentRegistering fromBluetooth devices by touching thePlease register Ri.For more information"Bluetooth machineTo register the vessel "( P107)Please visit.For more information about Bluetooth settings,"Make the Bluetooth settings" ( P106)It is GorankuPlease.13NextI want to touch onSetting of the vehicle information14Set the contents by selecting each itemMemoSet parking limit (car make vehicle dimension), parkingIt is reflected in the guidance of the car park and toll road fees.And during route guidance, in the case of the highway mode,You can not set the "toll segment".FifteenNextI want to touch onSetting of fuel consumptionSixteenSet the contents by selecting each itemMemoFuel consumption of the guideline has entered the factory.InputFuel consumption to force customers I confirmed in such dealerPlease enter the fuel consumption had left.17NextI want to touch onQUICK SETUP

Page 18

EighteenCRA4803-A Setting of personalizedUser currently in use( P188)DedicatedYou will do the setting.EighteenSet the contents by selecting each itemMemoFor detailed settings of the personalization settingsTe is,"To the user settings" ( P188)The visitGive me.19NextI want to touch onExit the QUICK SETUPTwentyEndit will touch onPreviousOne it will return to the previous screen.Introduction BackQUICK SETUP start screen( P15)It will return to.QUICK SETUP

Page 19

19IntroductionCRA4803-A Prepare for watching TVAfter purchasing the machine, when the first time to visit the TV (one-segment broadcasting), it can be receivedWork (channel scan) to be registered on the machine looking for a channel is required.Until the channel scan is complete, you will not be able to visit the TV.MemoDetailed information on how to television,"I see one-segment broadcasting"( P128)Please visit.Channel scan, please do in a place that is easy to receive radio waves of television.(Underground parking, etc.You may not receive radio waves.)Or when you remove the car battery, the settings initialization( P119)Channel scan even when you are required.OneBet the car engineTwoWhen the map screen is displayedI press the (audio)AV source screen is displayed.ThreeTVI want to touch onFourTouch the screenSimple operation screen appears.FiveMoretouch theBasic operation screen appears.SixScanit long to touchIf the channel scan is completed, the handLevi screen appears.

Page 20

TwentyCRA4803-A Names and functions of each partNavigation body (the closed state of the screen monitor)Menu button( P25, 35)It will display the navigation menu.Long press and image quality adjustment screen( P25)It is displayed.Security indicatorSecurity function is operatingIf that is be blinkingI can.( P118)You are here button( P23, 24, 39)In the case of the navigation screen (showing the other location),It will display the current location.If during the current location display, and change the registration scaleYou further.In the case of AV source screen, You are hereI switched on the screen.In either case, the screen, temporary and long pressBasis you can turn off the screen.Audio button( P23,121)In the case of the navigation screen, AVIt is switched to the source screenYou.Press and hold, the AV sourceIt can be in the OFFVinegar.AV source is OFFPress and hold the AV sourceBefore the AV source to the OFFIt will return to the nest screen.Open button( P24, 27 ~ 29)Out of disk and SD card,Adjust the angle of the screen monitorIt will display the operation screen of the eye.I / I buttonTrack and file of down / up and rewind/ Fast-forward and do the audio operations such as.Volume adjustment button( P122)Volume adjustment of audioIt will do.AUX input terminal( P144)Portable playersWhich external device to connect toVinegar.3.5 mm stereoInsert the mini plug.Hands-free microphoneNavigation body (state that opened the screen monitor)Disk insertion port( P27)Insert the CD and CD-R / RWTo you.SD card slot( P28)Insert the SD card.

Page 21

Twenty oneCRA4803-A Basic operationSteering switch (vehicles only)MODE switchRadio and CD, it will switch the AV source, such as a TV.Long press and AV sourceIt makes the nest OFF. / switchAudio, such as track and file of down / up and rewind / fast forwardOh it does.- / + SwitchWe will adjust the volume of the audio.Touch key of the current location screenUser icon touch keyUser eye set in the personalization settingsIt will display the configuration.When you touch, in the use of the personalization featuresCan you.For personalization features, and detailsClause"Using the personalization features" ( P187)Please visit.Congestion touch key( P77, 91)If we are to get the congestion information routeIf you are in guidance, and display congestion informationTo you.If it is not in the route guidanceIs, it will show the regulatory information.View touch key( P41)Guests can choose how to display and orientation of the map, one-way merYou can set the display and non-display of a phrase or logo.The character of the expansion and map scale, which is displayed on the mapIt can also be done, such as registration.Wide area / detail touch key( P41)And roughly the display range of the mapYou can expand (regional) in Na display,Reduction in the precision displayed (details) toI or you can.Info window touch keyAnd location information (city) each time you touchAV information (such as AV source names and playing in the title name)It will switch the.Easy destination search touch keyWhen you touch, the grain a search itemTable the destination menu that crowded RiIt is shown.For more information"Kan wasProfessionals named Search by destination Search "( P61)Please visit.MemoDisplay item of the location information of the information window (city name, traveling road name, latitude and longitude), set in advanceYou can in advance. "function to the setting"(P101)When the information window is the case of "city name", "traveling road name", map scale display is equal to or greater than 100 mIt will be displayed until the city name.Displaying detailed city map of 10 m ~ 50 m, city name, address name, DingIt appears to the eye.There is also a place where it does not appear depending on the location.Names and functions of each part

Page 22

Twenty twoCRA4803-A Basic operationWe'll explain the basic operation of the machine.Operated by touch panelMark and items are displayed on the screen (operationDirect contact with a finger on the touch key) and (TouchThat) it will be able to operate by.Example:EndThe final and menu that are currently openThe completion was to return to the original screen.Go backSuch as menus that are currently openIt will return the screen to the previous screen.Slide operationAnd slide your finger while touching the screen up, down, left, or rightNavigation by simply wells and audioYou can operate some functions of the organization.OneIt will touch on the slide reaction areaExample: CDSlide reaction area slide frameMemoSlide frame is displayed a predetermined time on the screen, slideIt will show the id reaction area.Slide frame of the icon () Is a fingerIt indicates the direction in which it is possible to ride.Slide eye of reaction area and the slide frameCon depends on the displayed screen.If slide reaction in the area, where the screenIf you touch you can do the slide operation.Slide frame is to be turned ON / OFF displayCan you. "view the slide frame"(P119)Operation guide will be displayed.Operation GuideTwoWhile touching the screen, runThe slide your finger to the direction in Thailand functionAnd release by deThe selected function is displayed in an enlarged size, and function operationTo you.Slide operation capable screen and each operation contentPlease refer to the following page.

Page 23

Twenty threeBasic operationCRA4803-A Basic operationSlide operation listOperation screenBehaviorNavigationRoute Information slide: display cancellation of route information slide: Display of the next guide landIntersection guide map slide: display cancellation of the intersection guide map slide: Display of the next guide landRoadblock consideration auto re-route slide: Check RoadblockAudioTransportation informationSlide: 1 620 kHz reception slide: 1 629 kHz receptionSlides: unmute slide: muteRadio / TVSlides: channel down slide: channel upSlides: unmute slide: muteDISC (CD, CD-R, CD-RW) /Bluetooth AudioSlides: track or file down slide: track or file upSlides: unmute slide: muteSDSlides: file down slide: File upSlides: unmute slide: muteAUXSlides: unmute slide: muteCellular phonePhone during an incoming callSlides: hang up the phone slide: answer the phoneOperated by buttonUse the button on the unit, the switching of the screen,Display of the menu screen, I audio of operationEtc. It is possible to carry out.Switching of the screen howNavigation screen and the AV sourceSwitched the scan screenNavigation screen (map screen) and the AV sourceOne-A screen (audio / video screen)It can be switched in touch.OneIn the navigation screen (OPress the audio)

Page 24

Twenty fourBasic operationCRA4803-A AV source screen is displayed.TwoIn AV source screen (Hometown)PushNavigation screen appears.MemoEven in a state of displaying an AV source screen and lessThere are cases where the information is interrupt display.Automatic display of -VICS emergency information( P91)- Intersection guidance display( P71)Interrupt display of the AV source screen (intersection guidanceDisplay only), you can be ON / OFF. "function to the setting"(P101)Temporarily turn off the screen(Navi standby)At night, if the screen is bright, such as temporarilyYou can turn off the screen.OneLong press (Hometown)Screen will disappear temporarily.MemoWhen you touch the screen during navigation standby, originalIt will return to the screen.Also, pressing (Hometown)To display the current position screen by releasing navigation standbyTo you.When you press the (audio) NabisutanRelease the by to display the AV source screen.In Navi standby, voice draft of navigationInside also will not be output.Sound of audio outIt will be a force.Back guide monitor( P149)During use,It will release the temporary navigation standby mode.At the time you have finished using the camera function, automaticallyIt will return to the navigation standby mode.Also Navi standby by the ON / OFF of the ACCNot released.And adjust the angle of the screen monitorMakeCome and adjust to a comfortable viewing angle the screen monitorIt can be .OnePress the (open)Two+or-you want to touch on+Screen monitor opens one by one stage.-Screen monitor will close one by one stage.MemoAngle memory of this machine was adjusted screen monitorIs, power supply OFF / ON (engine switch OFF /The ON) and it will be automatically adjusted angle even.If you want a different angle, and it will adjust againSai.

Page 25

Twenty fiveBasic operationCRA4803-A Basic operationManually or tool adjustment of the angle of the screen monitorPlease do not forcibly performed using.Screen monitorMay fail with a strong force is applied to terYou.When you adjust the angle of the screen monitor, thingsPlease be careful not to pinch.Caught monoIn the time we had, remove the it caught thingPlease adjust from.Adjust the image qualityBrightness and view angles of the surrounding, to match the picture"Black of depth", "Contrast", "Brightness", "colorTemperature "," depth of color ", adjust the" tint "Thing I can.MemoAnd automatically set the day and night in conjunction with the car lightsIt will switch to.Set of "black of depth", "Contrast", "brightness"Constant can be set separately in the day and night.Setting the "brightness" other than "color temperature" windowYou can be set separately for each type."Color temperature", aging ne of LED backlightIn any reason, you have displayed on the monitor of this unitIf an error occurs in the color of the actual video and videoIt will adjust to such.Also the video during the display of the back guide monitor, and the followingIt is possible to adjust image quality by performing the operationYou.The adjustment of the back guide picture, the ambientPlease go while safely full consideration of.You can not operate while driving.OneIn the display screen of the image to be adjusted,(Menu) press for more than 2 secondsTwoTouch the left and right of the touch keyAdjustDepth of black (white)Become thin (black)ThickenContrast (light and dark)LowThe difference between the black-and-white is smallHighThe difference between the black-and-white is largeBrightnessDarkDarkenMingLightenColor temperature(red)Warm color system becomes stronger(blue)Cool system becomes strongerColor strengthPaleBecome thinConcentratedThickenTint(red)Redden(green)Become greenMemoDepth of color, one-segment broadcasting or back guideIt adjusts only if you are viewing the monitor imageRukoto I can.Shades, back guide modeonly when Nita you are viewing a video, to adjustThing I can.ThreeBackto TouchOperation of the list screenCommon operations on the list screen that is displayed during operationWe will describe.Operation Basic List

Page 26

26Basic operationCRA4803-A The feed pageIt will move one screen at a time./It will touch on(And continue to touch,It will move continuously.)The feed tabAnd Sen in the tabbed listThe switch to a list of do's tabRi I will instead.Tab (example:rootGuidanceit will touch on)50 operation of sound tabLine feedThe line feed the child a listYou bet you can.(Example: Oh or Is the was I)Tab (Oh~Istanding)ChisuruIt sends soundThe sound list Feed childYou bet you can.(Example: Oh have sales e e)(Eg tabOhis repeated in)Touch returns50 sound at the time of the side map displayOperation of the tabFeed Na was revealedTo put the list on the next pageRukoto I can. It will touch on(Example:It was revealedYara Hama)MemoTo return to the list on the previous page, Touch theYou.For side map,Attached to the "side mapTe "( P46)Please reference to.Operation of the check listIn the checklist, touch the itemAnd (check mark) is displayed, selectIt indicates that it is a .Again sectionWhen you touch the eyeIt disappears, selected releaseIt is.Operation of the indicator with a listThe indicator with a list, select an itemList the right side of the indicator lights andis, it indicates that it is selected.AnotherTo select the time item and indicator is offIt is, will be deselected.Out of diskAnd using a manual or tool the opening and closing of the screen monitorPlease do not attempt to place Te.Screen monitorYou may want to failure and strong force is applied to.When the opening and closing of the screen monitor, and pinch your stuffPlease be careful not.It was caught monoWhen it was waiting, remove the stuck onesPlease open and close.Wearing the adapter 8 cm disk absolutePlease do not use to.

Page 27

27Basic operationCRA4803-A Basic operationInjury of fingerNoteWhen you open and close the screen monitors, fingersEtc. and attention so as not to pinch DoThere.Please note especially for children.It may cause injury.Disk InsertingOnePress the (open)TwoDisk insertiontouch theScreen monitor opens.ThreeInsert a diskDisk insertion portI to the label sideAutomatically when you insert the disc partwayand retracted, the screen monitor is closed.Disk of the pickup typeOnePress the (open)TwoDisk ejecttouch theScreen monitor is opened, the disk is automaticIt will manner pushed out.Memoanother one in a state in which the disc has been pushed up to the middleWhen you press the degree eject button, the disk is automaticallyand retracted, the screen monitor is closed.ThreeRemove the disc, (OPress the Pung)Screen monitor it will close.

Page 28

28Basic operationCRA4803-A And out of the SD cardThe Day of the SD card when you are using with this unitEven if others lost, and compensation of the lost data NitsuPlease pardon be had.And using a manual or tool the opening and closing of the screen monitorPlease do not attempt to place Te.Screen monitorYou may want to failure and strong force is applied to.When the opening and closing of the screen monitor, and pinch your stuffPlease be careful not.It was caught monoWhen it was waiting, remove the stuck onesPlease open and close.When forced to carry out the loading and unloading of the SD card, and Ya this unitThere is a possibility that the SD card may be damaged.PLEASE NOTEGive me.In SD card slot, even the non-SD cardPlease do not insert the.Gold, such as coinsIf you insert a genus products, failure internal circuit is damagedOf the cause.For safety reasons, while driving out of the SD cardPlease do not.Injury of fingerNoteWhen you open and close the screen monitors, fingersEtc. and attention so as not to pinch DoThere.Please note especially for children.It may cause injury.Of SD card InsertingOnePress the (open)TwoSD card insertiontouch theScreen monitor opens.ThreeSD "clicks" and until the sound isPlug the cardThe label sidePlugging inSD card slotSD cardFourI press theScreen monitor it will close.Lee in a state in which the SD card is not fully insertedClose the screen monitor and press the button objectRukoto can not.In addition, the SD card when theMessage and sound proposal to encourage the correct insertion of the soilIt will be inside.Do be sure to insert the SD cardPlease press the Luo eject button.Removal of the SD card-typeOnePress the (open)TwoSD card removaland touchMakeScreen monitor opens.

Page 29

29Basic operationCRA4803-A Basic operationThreeSD "clicks" and until the sound isAnd release by pushing the cardSD card will be pushed out.FourStraight pull out the SD card,Press the (open)Screen monitor it will close.Picture in a state that does not completely remove the SD cardPlease do not close the surface monitor.The cardIt may be damaged.In addition, SD CarSoil Press the center slowly, straight-preparativePlease put out Ri.SD card taken out, put in a special caseBy Runado, please keep.Also, a falseSo that there is no such child swallow Te,Please be considerate to storage location.

Page 30

ThirtyCRA4803-A Conversion cut the method of character inputObtainCharacter input of this unit, two methods (keyboardChild is carried out by selecting from a de system mobile phone system)You bet you can.OneOrIt will touch onEach time you touch, the conversion to cut as followsWari you.Keyboard systemMobile telephone systemFlow of character input operationFlow of general character of the input operation, the followingIt will be the cormorant.To switch the type of character Enter the charactersTo non-conversion, do the conversion character inputI want to end theSwitch the type of characterOneIt will touch on the type of characterType of character is switched.MemoTo the Chinese character conversion input,Kanaand then touch.To the katakana input, once hiragana inputAfter switching,Canaand then touch.Character input operation"ATOK", LtdRegistration of JUSTSYSTEMIt is a trademark.When you register such as the location of the name and phone number, enter the letters and numbers.Here,Is displayed during menu operation, it describes how to input operation of letters and numbers.MemoLetters, numbers, Katakana, Hiragana, Kanji, symbols can be entered.Depending on the item, you may be the type of characters that can be used is limited.For example, in the case of a name search, the ratioLagana are not available other than the input.This unit, the character input conversion system, JustSystems Corporation "ATOK"I am using.

Page 31

31CRA4803-A Basic operationEnter a characterBasic operationIf you want to enter on the keyboard methodOneTouch to the character you want to inputIf you want to enter the mobile phone systemOneOr the character you want to input is displayedIn, you want to touch the keyInput Example 1: JapanNaTouch twice to "to"It isto touch two five times "to the ho"WaTouch three times "Japan"Input Example 2: OtaOhto Touch 5 times "Contact">Touch to "Contact _"Ohto Touch 5 times "many"OtherTouch once "Ota"Switch the full-width-half-widthKatakana, in the case letters, numbers, symbols em -You can switch the single-byte.OneEmorhalf-widthtouch theIt will switch to full-width or half-width.Voiced, half-voiced, the upper / lower caseChangeIn the case of hiragana and katakana, and chose a characterYou can add a voiced sound and semi-voiced sound by, lowercaseIt can be switched on.OnelowercaseI touch theEach time you touch, the cursor left and characterBut it will change as follows.Lowercase voiced half voiced original characterReturn to theExample 1: Tsu Tsu ~Tsu Uz TsuExample 2: Ha Ha bus pa CUppercase / lowercaseSwitch the characterDuring alphabetic input, upper / lower caseYou can switch between.OneLarge / lower caseI want to touch onEach time you touch, uppercase and lowercase letters offRi I will instead.Character input operation

Page 32

32CRA4803-A Move the cursor positionOneThe top right of the screenit will touch onMove the position of the cursor only touched minuteYou can be.MemoIf in the character input, the cursor is displayed in the same colorAnd it can be moved within that have been character rangeYou.If the input screen in the search, theThe cursor inIt is not possible to move the le.If in kanji conversion, and a range of characters to be convertedIt can be changedYou want to delete a characterOneThe car on the right side of you want to delete a characterMove the Sol,removestanding inChisuruEach time you touch, the statement to the left of the cursorCharacter is deleted one character at a time.CursorIf that someone is on the left end, removed the right of the characterIt is.Only the necessary amount by deleting the character,It will repeat the input.MemoDeleteWhen you long touch, all of the characters onceYou can be removed.Free up spaceOneOf the character we want a spaceMove the cursor to the right,SpaceI want to touch onspace is inserted only touched minute.Insert a characterOneTo the right of where you want to insert a characterMove the cursorIt is inserted text at the cursorYou can.MemoCursor, range of characters that are displayed in the same colorYou can move in .Character input operation

Page 33

33CRA4803-A Basic operationDo non-conversion, the conversionYou can directly enter the Hiragana, HiraganaI will convert such as kanji and katakana.ConversionConversion, which is displayed according to the characters enteredBe selected from the candidate (predictive conversion function)You can.Make a non-conversion inputOneEnter the characters in hiragana,No conversionI want to touch onIt is entered in hiragana.Make the conversion inputOneEnter the characters in hiraganaconversion candidates is displayed in response to the input charactersWill.TwoConversionTouch to,confirmorAll confirmedI will touch onMemoNext candidateWhen you touch, the candidate list appearsYou.input when you touch on the converted character you wantCan you.orWhen you touch, the character to be convertedYou can change the range.It is entered in the converted character.It wants to end the character inputOneInput endit will touch onCharacter input operation

Page 34

34CRA4803-A Symbols can be kanaAcademic symbolReadingSymbolEqual=CongruenceDainari>Will award