Now available for Fine/Line 30 - Slant/Fin · H-5X Element Furnish and install H-5X baseboard...

®

BOILERS & BASEBOARD

Since 1949

Now available for Fine/Line 30

Colors to enhance any décor!

Look for ourHydronic Explorer appon iTunes, Google Play and atwww.hydronicexplorer.com

(Works on iPad, iPhone & Android devices)

Decorator Colors for Premium Baseboard andCommercial Fin-Tube Radiation

350 Series

Slant/Fin is America's best known manufacturer of baseboard heating equipment. Since 1949contractors and homeowners have come to know and trust Slant/Fin. Our hot water baseboard perimeter system surrounds you and your family with heatingcomfort. It is the most efficient, most comfortable heating system of all! But what’s more, all ofour most popular Premium Baseboard and Commercial Fin-Tube Radiation models are nowavailable in decorator colors! Perfect for home renovations or new construction!Slant/Fin Decorator Series baseboard, in appliance-like finishes, is an affordable optionto take decorating to new heights.

We have the colors that go in any décor!

350 Series: High-Output, Slope-Top Baseboard

• Two heights for one or two heating element tiers• Nu-White enamel finish standard• 5 heating element selection• Fully assembled and factory packaged• Room control damper optional• Extra backbone• Strong front panel resists kicks & dents• Available in 8 additional decorator colors

350 Series baseboard combines, for thefirst time, the compactness and economyof baseboard with the high output andheavy-duty construction needed for “in-between” applications. 350 Seriesmakes baseboard practical for industrialand commercial use, as well as gardenapartments, multi-story construction andcustom residential heating. It is also theperfect supplement for Slant/Fin 3⁄4" base-board, in “problem areas” of high heatloss or limited wall space. Optional 1"and 11⁄4" copper/aluminum elements per-mit higher flow rates, longer series-loopruns and lower pump loads whererequired. With the 11⁄4" all-steel element,350 Series is perfect for use in one or twopipe steam systems. 350 Series is facto-ry pre-assembled in individual cartons forrapid installations.

Matching snap-on accessories let youspeed through virtually any job conditionwithout custom cutting and fitting. Pianohinged accessories permit easy accesswith flush or recessed installation.

“CAST-IRON” RUGGEDNESS: 350Series is engineered throughout for max-imum strength. Super-strong enclosures.Extra-strength steel brackets. Heavy-duty copper and steel tubing with full millrated bursting strength. Rock-solid inter-locking fin elements are so strong youcan stand on them.

“CONTRACTOR-DESIGNED” for fast,economical installation. 350 Series goesstraight from carton to wall–without sort-ing parts, wasting time. Factory pre-cutlengths of 2 to 8 feet combine with snap-on telescoping accessories to make wall-to-wall installations without cutting.

Slant/Fin 350 Series – Ideal for light commercial andindustrial hot water or steam heating.• Compactness and economy of baseboard • High output and heavy-duty construction

®

BOILERS & BASEBOARD

Since 1949

DIMENSIONS ORDERING DATAPACKAGING: Complete 350 Series baseboard enclosuresare factory assembled and individually packaged. Cover andheating elements are packaged and sold separately. Coverincludes brackets and expansion cradles. Cover may beordered with optional fully modulating damper.CONSTRUCTION: Back panel, front cover and optionaldamper fully assembled at factory, ready to fasten to the wall.DEPTH: 31⁄2"HEIGHTS: 97⁄8” (one tier) and 137⁄8” (one or two tier)LENGTHS: 2', 3', 31⁄2’, 4', 5', 6', 7', 8'MATERIAL: 19-gauge steel or 16-gaugegalvanized steel front cover. 24-gauge back cover.17-gauge brackets. ELEMENT SUPPORT: Self-adjusting, polypropylenebrackets, allowing quiet expansion.FINISH: 19-gauge model: Nu-White enamel finish.16-gauge model: galvanized finish.Custom colors available.350 SERIES MODELS:Model 351 with H-1, 3⁄4" copper/aluminum finsModel 353 with H-3, 3⁄4" copper/aluminum finsModel 354 with H-4, 1" copper/aluminum finsModel 355 with H-5X, 11⁄4" copper/aluminum finsModel 356 with H-6X, 11⁄4" steel/aluminized steel fins

ACCESSORIES

Model Element “A” 351 H-1 3 15⁄16" 353 H-3 3 5⁄8 " 354 H-4 3 5⁄8 " 355 H-5x 3 15⁄16 " 356 H-6x 3 15⁄16 "

350-14 350-10

H-3 H-4 H-1 H-5X H-6X

350 SERIES RATINGS

Cover AssemblyFurnish and install 350 Series model_______baseboard cover assembly as manufactured by Slant/FinCorp., consisting of one-piece, back and top panel, andone-piece front panel, formed of cold rolled steel. Bottomand top edges of back panel shall be formed to providechannels along entire length, to receive full-height supportbrackets. Brackets shall be die-formed of electro galva-nized cold rolled steel, for rigid bracing and spring lock-ing. Slide-action expansion cradles, formed of polypropy-lene, shall be inserted between heating element and sup-port bracket. Cradles shall protect element bottom andsides from contact with brackets or cover, confining ele-ment to free lateral expansion for noiseless operation. Allcover components with a 19-gauge front cover shall bepainted in Nu-White thermosetting polyester enamel andall cover components with a 16-gauge front cover shallhave a galvanized finish.

Extra-cost OptionsOptional damper shall be provided for each length ofenclosure, and shall modulate fully and freely, yet retainany setting through its arc. Optional 16-gauge steel withgalvanized finish front cover shall be provided with eachlength of enclosure. Special colors available per architectselection or pub. no. SPC-40.

H-1 ElementFurnish and install H-1 baseboard heating element asmanufactured by Slant/Fin Corp.consisting of 3/4" nominal copper tubing, with 3" x 3-1/4"

x .024" aluminum fins, spaced 48 per linear foot. Thetubing shall not be weakened by expansion in process ofmanufacture, but shall be forced through undersized finholes to obtain a force-fit mechanical bond. A flange withfour teeth shall be formed on each fin to increase thermalcontact and to space and lock the fins uniformly in place.One end of each element tube shall be expanded toreceive the unexpanded end of another, without cou-plings.

H-3 ElementFurnish and install H-3 baseboard heating element asmanufactured by Slant/Fin Corp., consisting of 3/4" nom-inal copper tubing, with 3-5/32" x 2-1/2" x .011" aluminumfins bent to 2-3/4" x 2-1/2" spaced 55 per linear foot. Thetubing shall not be weakened by expansion in process ofmanufacture, but shall be forced through undersized finholes to obtain a force-fit mechanical bond. A flange withfour teeth shall be formed on each fin to increase thermalcontact and to space and lock the fins uniformly in place.One end of each element tube shall be expanded toreceive the unexpanded end of another, without couplings.

H-4 ElementFurnish and install H-4 baseboard heating element asmanufactured by Slant/Fin Corp., consisting of 1" nomi-nal copper tubing, with 3-15/32" x 2-1/2" x .011" alu-minum fins bent to 3" x 2-1/2" spaced 48 per linear foot.The tubing shall not be weakened by expansion inprocess of manufacture, but shall be forced throughundersized fin holes to obtain a force-fit mechanical bond.

A flange with four teeth shall be formed on each fin toincrease thermal contact and to space and lock the finsuniformly in place. One end of each element tube shall beexpanded to receive the unexpanded end of another, with-out couplings.

H-5X ElementFurnish and install H-5X baseboard heating element asmanufactured by Slant/Fin Corp., consisting of 1-1/4"nominal copper tubing, with 3" x 3-1/4" x .020" aluminumfins spaced 48 per linear foot. The tubing shall not beweakened by expansion in process of manufacture, butshall be forced through undersized fin holes to obtain aforce-fit mechanical bond. A flange with four teeth shallbe formed on each fin to increase thermal contact and tospace and lock the fins uniformly in place. One end ofeach element tube shall be expanded to receive the unex-panded end of another, without couplings.

H-6X ElementFurnish and install H-6X baseboard heating element asmanufactured by Slant/Fin Corp., consisting of 1-1/4"IPS steel pipe (Schedule 40), with 3" x 3-1/4" x 0.028"steel fins, spaced 48 per linear foot. The pipe shall not beweakened by expansion in process of manufacture, butshall be forced through undersized fin holes to obtain aforce-fit mechanical bond. A flange with four teeth shallbe formed on each fin to increase thermal contact and tospace and lock the fins uniformly in place. Both ends ofeach element pipe shall be expanded to be threaded withIPS standard threads.

SLANT/FIN CORPORATION, Greenvale, N.Y. 11548 • Phone: (516) 484-2600FAX: (516) 484-0933 • Canada: Slant/Fin LTD/LTEE, Mississauga, Ontario

©Slant/Fin Corp. 2018 • Printed in the U.S.A. 718 • Publication No. 350-10

[* Based on 65°F entering air temperature † Millinches per foot.Note: Ratings are based on active finned length (3" less than overall length), and include 15% heating effect factor. Use 4 GPM ratings only when flow is known to be equal to or greater than 4 GPM; otherwise 1 GPM ratings must be used.

Model#

ElementType

Rows ofHeatingElement

Tube Size& Material

FinsPerFoot

Fin Size& Material

Single-tier, 9 7⁄8” Models 351-10 H-1 1 3/4" 3" x 31⁄4" x .024" 48 1 GPM 47 230 310 390 480 570 670 770 870 980 1080 1200 1320 copper aluminum 4 GPM 525 250 330 410 500 600 700 810 920 1040 1140 1260 1400

353-10 H-3 1 3/4" 35⁄32" x 21⁄2" x .011" 55 1 GPM 47 210 290 360 440 520 610 710 800 900 1000 1100 1220 copper aluminum 4 GPM 525 230 300 380 460 550 650 750 850 960 1060 1170 1290

354-10 H-4 1 1" 315⁄32" x 21⁄2" x .011" 48 1 GPM 13 210 290 360 440 520 610 710 800 900 1000 1100 1220 copper aluminum 4 GPM 145 230 310 380 460 550 650 750 850 960 1060 1170 1290

355-10 H-5X 1 1-1/4" 3" x 31⁄4" x .020" 48 1 GPM 6 1160 220 300 370 450 540 640 730 830 940 1040 1140 1260 copper aluminum 4 GPM 63 230 310 390 480 570 670 780 880 990 1100 1210 1340

356-10 H-6X 1 1-1/4" IPS 3" x 31⁄4" x .028" 48 1 GPM 3 980 190 250 320 390 460 550 630 710 810 890 980 1080 steel electro-gal. steel 4 GPM 41 200 270 340 410 490 580 670 750 850 940 1040 1150

One-tier, 13 7⁄8” Models

351-14 H-1 1 3/4" 3" x 31⁄4" x .024" 48 1 GPM 47 245 328 412 501 597 704 892 989 1085 1182 1279 1376 copper aluminum 4 GPM 525 259 347 435 530 631 744 984 1091 1198 1305 1412 1519



355-14 H-5x 1 1-1/2" 3" x 31⁄4" x .020" 48 1 GPM 6 1280 236 317 397 484 576 678 859 952 1045 1139 1233 1326 copper aluminum 4 GPM 63 250 335 420 512 609 717 948 1051 1154 1257 1361 1464

356-14 H-6x 1 1-1/4" IPS 3" x 31⁄4" x .028" 48 1 GPM 3 1105 204 273 343 417 497 585 742 822 903 984 1064 1145 steel electro-gal. steel 4 GPM 41 1870 215 289 362 441 525 618 819 907 997 1085 1175 1265

Two-tier, 13 7⁄8” Models

351-14 H-1 2 3/4" 3" x 31⁄4" x .024" 48 1 GPM 47 360 480 610 740 880 1040 1290 1440 1590 1740 1890 2030 copper aluminum 4 GPM 525 380 510 640 780 970 1150 1420 1590 1750 1920 2080 2250



355-14 H-5x 2 1-1/2" 3" x 31⁄4" x .020" 48 1 GPM 6 1890 350 470 590 710 850 1000 1240 1390 1530 1670 1820 1960 copper aluminum 4 GPM 63 370 500 620 750 940 1100 1370 1530 1690 1850 2010 2160

356-14 H-6x 2 1-1/4" IPS 3" x 31⁄4" x .028" 48 1 GPM 3 1630 300 400 500 610 730 860 1070 1200 1320 1450 1570 1690 steel electro-gal. steel 4 GPM 41 320 420 530 640 810 950 1190 1320 1460 1600 1730 1870

HOT WATER RATINGS* BTU/HR./FT.WaterFlow

PressureDrop †

Steam1 PSIBtu/Hr.Per Foot 110˚F 120˚F 130˚F 140˚F 150˚F 160˚F 170˚F 180˚F 190˚F 200˚F 210˚F 220˚F

SPECIFICATIONS

www.slantfin.com

Now available for Fine/Line 30 - Slant/Fin · H-5X Element Furnish and install H-5X baseboard...

Documents

Transcript of Now available for Fine/Line 30 - Slant/Fin · H-5X Element Furnish and install H-5X baseboard...