Double Wear LifeDouble Tilled AcresDouble ROIDouble ReliabilityDouble Durability

• Double the wear life of the prior KUHN Krause Dominator® fabricated steel and carbide capped ripper points

• Solid casting increases durability in rocky conditions versus a welded carbide cap-style where caps can be broken or lost

• Heavy-duty 26.5 pounds versus previous 18 pound 7" fabricated point with welded cap

• Double K 2.5" straight ripper point weighs 22 pounds versus 16 pounds for former 2.5" fabricated point with welded cap

• Recessed pocket eliminates wear on mounting bolts

KUHN Krause Double K® Ripper Points

Part #Q4062300

Part #Q4062310

Double K Cast Chromium Carbide 7" Wing Chisel Point

Double K Cast Chromium Carbide 2" Reversible Straight Chisel Point

Double K Cast Chromium Carbide 7" Wing Ripper Point

Double K Cast Chromium Carbide 2.5" Straight Ripper Point

• Double K 7" wing chisel points provide increased seedbed soil fracture over standard 4” twisted shovels and a more level seedbed

• Hard surfacing not required for extended wear, typical of steel points

• 7" cast wing chisel point weighs 12 pounds versus 8 pounds for a standard 4" twisted one piece chisel point

• 2" reversible straight chisel point weighs 12 pounds versus 6 pounds for 2" reversible forged steel point

• Recessed pocket eliminates wear on mounting bolts, no more mounting with plow bolts that can “slip and turn” when attempting to remove

KUHN Krause Double K® Chisel Points

Part #Q4066471

Part #Q4066571

INVEST IN QUALITY®www.kuhn.com

No matter how you say it, Double K® points from KUHN Krause simply last longer than any point we’ve ever offered!

Prin

ted

in U

SA

QP

0002

US

062

0 C

opyr

ight

KU

HN

202

0

NOTHING FITS YOUR KUHN KRAUSE MACHINE BETTER THAN A GENUINE KUHN KRAUSE PARTOnly genuine KUHN Krause parts are custom designed, custom fitted and durability tested to the exact specifications of your KUHN Krause machine. To keep your KUHN Krause equipment running like new, we’ve got you covered. KUHN Krause provides in-depth, hands-on training to our vast network of dealers, giving them the skills and know-how to service you quickly.

KUHN NORTH AMERICA, INC. Corporate Headquarters1501 West Seventh Avenue - Brodhead, WI 53520

DOMINATOR® 4850 DOMINATOR® 4855

DOMINATOR® 4860

Equipped on Dominator 4860-11 (22 ft.)• 2600+ acres on points (left)• Customer reports only 1000 to 1200 acre average on

previous points in identical conditions• Heavy clay soils, north central Ohio• Used point retains enough mass for additional wear life

Double K® Cast Chromium Carbide 7" Wing Ripper Point

Double K cast chromium carbide 7" wing ripper points will also fit Wil-Rich, Landoll and John Deere single point 1/2" bolt attachment x 1-1/4" wide, parabolic shanks.

Wear Example Wear Example

LANDSAVER® 4810

4000 CHISEL

LANDSAVER® 4800/4820

Double K® 7" Wing Cast Chisel PointDouble K® 2" Reversible Cast Chisel Point

Equipped on Landsaver 4810-21 (28 ft.)• 800+ acres on points (above, right)• Customer reports approximately 150 acres on reversible 4"

twisted point in identical conditions• Sand/sandy loam, southern Michigan• Used point retains enough mass for additional wear lifeNote: 7” Wing Double K chisel points are not recommended for chisel plow shanks with static point loads less than 1,500 pounds

Equipped on Landsaver 4810-19 (25 ft.)• 500+ acres on point (above, left)• Customer predicts more than 3 times life over 2" forged

steel reversible points• Sandy loam, west Texas• Used point retains enough mass for additional wear life

and has not been reverse mounted

Double K chisel points will also fit Wil-Rich, Landoll, Sunflower and John Deere chisel or 2-1/4" bolt spacing with (2) 1/2" bolts.

Used New UsedNewUsed

New

Contact your dealer todayto order your primary tillage point replacements.

DOMINATOR® 4856