Smart Garage Controller 3M Stickers

Screws

Line Holders Ties

1.Power up the garage device,the red light and blue light flash alternatively.

2.Use the included Red & Black wire connect the device to your opener;Put each end to the same terminals as the wall button wires are terminated to.

3.Use a tiny screw or nail to click the buto in the device,your garage door should activate.

4.Three type power supply mode (default power supply is AC1 00~250V)(1) AC100~250V (2) DC5V (3) DC9~36V

During pairing process,make sure that your IOS or Android device and the garage are within the range of your WiFi router.

Power up the garage ,the red light and blue light flash alternatively.

Brackets

garage

garage

Make Your Home Smarter

If this test fails,your device may not be compatible.For additional installationInstructions and the list of compatible models,please check it from other’sUser manual and contact us online directly.

Select the "Electrical" Select "Smart Garage Door Opener"type.Notice:Open/Close Alarm

"Alexa, is device name open ?"

More Setting:Create a PIN code to open by voice,then enter ALL DEVICES to select garage door.Setting the voice command,which you can perform a serious of actions.

OpenClose

OpenClose

"OK google,is device name open orclose?"

Note:(AP Mode Connection)If connection failed under normal connection,and it maybe is anetwork problem.You can now be connected with the followingsteps:"AP MODE"1.Press the "on/off" button for 5 seconds and make sure your devices light is flashing slowly.2.Tap the icon"+"on the right top,then select the"electric",then select the "Smart Gargae Door Opener"type.

3.Go to the upper right corner and press"Other Mode",then choose AP Mode.4.Check if the connection light is flashing slowly.Press "Confirm slowly blink."Then slect your 2.4GHz networks,and enter wifi password confirm.

5.Then the screen will show "connect your mobile phone to the device's hotspot".Press "Go to connect" and it will connect. The screen will jump to your phone's settings wifi connection,so enter the phone"Wi-Fi".

6.Now,you will see the mobile phone WIFI.There will be a connectionoption:"Smartlife-XXX",select it.In the tap that your wifi is alreadyconnected to,it will state,"Smartlife-XXX" on it and return to"SmartlifeThe APP" Screen,and you will see the connecion pecentage.

7.Waiting until the connection is successful.Note:1. Only support USA alexa account .2. Must be set the voice password,which you can useoperator the garage door opener.

Note:

1.Clear cache of setting from "Tuya Smart" or "Smart life"

2.Enter notice of wifi garage door opener and set passwork.（the password only use for google home ）

Make sure your garage door closed before installation.