Note 2070831 - Create Missing Queries to ST-BCO SP10

7/26/2019 Note 2070831 - Create Missing Queries to ST-BCO SP10

http://slidepdf.com/reader/full/note-2070831-create-missing-queries-to-st-bco-sp10 1/19

Create Missing Queries in ST-BCO SP10Note 2070831

QUERY 0SM_ATC_RUNDATE_LOOKUP

0. Preparation

a. Ensure the program SAP NetWeaver Business Explorer Query Designer (BEx Query

Designer) is installed.

i. If the BEx Query Designer isn’t installed you can download and access it at the SAP

Service Marketplace as a part of the SAP GUI

b. Ensure you got the required authorization to create BW queries

1. Start BEx Query Designer and login to your BI Content Development System

2. Select “ [Key] Text” for the option “Technical Names” :




Copyright/Trademark

3. Open the query 0SM_UPL_USED_OBJS_ON_DATE

a. Select “Open Query…” in the toolbar

b. Select the option “Find” on the left side of the “Open Query” Dialog

c. Ensure, the option “Search in Technical Name” is selected

d. Enter the name “0SM_ATC_RUNDATE_LOOKUP”

e. Click “Find”

f. If a query is found, this guide was already executed

g. If no query was find, select “Cancel” and proceed with Step 4




Copyright/Trademark

4. Create a new Querya. Select “New Query…” in the toolbar b. Select the option “Find” on the left side of the “New Query” Dialogc. Ensure, the option “Search in Technical Name” is selectedd. Enter the name “0SM_ATC”e. Click “Find”f. Select the object “[0SM_ATC] ATC Results”g. Click “Open”




Copyright/Trademark

5. Rowsa. Select “Rows/Columns”b. Drag “[0SM_ATC_DT] Date of ATC data” of dimension “[0SM_ATC6] ATC RUN” into the

area “Rows”

c. Select “[0SM_ATC_DT] Date of ATC data” in area “Rows” and modify the description in the

properties area to “RUN_DATE”




Copyright/Trademark

6. Suppress Resul t Rows

a. Select “[0SM_ATC_DT] RUN_DATE” in area “Rows”

b. In properties switch to tab “Display”

c. For option “Result Rows” select “Always Suppress”




Copyright/Trademark

7. Add Filter for System ID

a. Select “Filter”

b. In the InfoProvider area navigate to dimension “[0SM_ATC2] Landscape”, characteristic

“[0SMD_LSID] System ID”, folder “Characteristic value variables” and drag variable

“[0SM_V_LSID] System ID (opt, single)” to area “Characteristic Restrictions”




Copyright/Trademark

8. Save query

a. Select “Save Query” in the toolbar

b. In the dialog enter “0SM_ATC_RUNDATE_LOOKUP” as description

c. Enter “0SM_ATC_RUNDATE_LOOKUP” as Technical Name

d. Click Save

e. You might be prompted to specify a package and/or transport request. Choose accordingly.

(If you are not prompted, the query will be created as Local Object in the selected system).



QUERY 0SM_ATC_RS_DETAILS

Copyright/Trademark


0. Preparation





b. Ensure you got the required authorization to create BW queries1. Start BEx Query Designer and login to your BI Content Development System





Copyright/Trademark

3. Open the query 0SM_ATC_RS_DETAILS




d. Enter the name “0SM_ATC_RS_DETAILS”

e. Click “Find”


g. If no query was find, select “Cancel” and proceed with Step 4

4. Characteristi c Restrict ions

a. Select “Characteristic Restrictions”b. Drag “[0SM_ATC_MT] Message Type of dimension “[0SM_ATC4] Extension information”

into the area “Characteristic Restrictions”c. Change the description of Message Type to " MSG_TYPE”.

d. In "Characteristic Restrictions" area Select MSG_TYPE and double click

e. In the popup Windows for Select Options that will be displayed , Drag and Drop the following

Single Values , [E] Error, [N] Information and [W] Warning , Then Click to "OK"




Copyright/Trademark

5. Default Values

a. Select "Default Value" , Drag “[0SMD_LSID] System ID of dimension “[0SM_ATC2]

Landscape ” into the area “Default Value' , Change the description to SYS_ID

b. In the "Default Value" Area select the SYS_ID and double click, a popup window will be

displayed.

c. Select variable and the list of variables will be displayed. Select variable "System ID"

and drag it to the "Chosen Selections". Click on "OK".

d. Drag “[0CCMMANDT] CLIENT of dimension “[0SM_ATC3] Key information ” into the

area “Default Values' ,

e. From Dimension "0SM_ATCT" Time, Drag the characteristic "0CALDAY" Calendar day,

change the description to Day.f. In the area of "Default Values", double click on the field Day , a popup will be

displayed. Select "Variables", and move "Single value optional date" to the Chosen

Selections list , Click on "OK"




Copyright/Trademark

g. From Dimension "0SM_ATC3" Key information, Drag the characteristic

"0SM_ATC_ONM" Object name , change the description to " OBJECT_NAME"., Drag

also the characteristic "0SM_ATC_OTY" Object Type , change its description "

OBJECT_TYPE".

h. From Dimension "0SM_ATC4" Extension information, Drag the characteristic"0SM_ATC_MT" Message Type , change the description to " MSG_TYPE". Drag also

the characteristic "0SM_ATC_MID" ID for Message Code change its description to

MSG_CODE

6. Rows :




Copyright/Trademark

Once step 5 is successfully executed , Move to the tab "Rows/Columns" and drag and drop All

the fields in the "Free Characteristics" area to the Rows Area .

Rows area after step 6 should look as follows:

7. Columns

From the Key Figure part of the info provider drag and drop the following key figures: Priority 1,

Priority 2 and Priority 3 to the Columns area. Adjust the description of the key figure to "PRIO1",

"PRIO2" and "PRIO3".




Copyright/Trademark


a. For ALL the fields in the " Rows" area execute b and c



9. Save the query


b. In the dialog enter “0SM_ATC_RS_DETAILS” as description

c. Enter “0SM_ATC_RS_DETAILS” as Technical Name

d. Click Save





QUERY 0SM_ATC_DAILY_DETAILS

Copyright/Trademark


0. Preparation





b. Ensure you got the required authorization to create BW queries1. Start BEx Query Designer and login to your BI Content Development System


3. Step 3 Open Query




d. Enter the name “0SM_ATC_DAILY_DETAILS”

e. Click “Find”


g. If no query was find, select “Cancel” and proceed

4. Default Values




Copyright/Trademark

a. From Dimension "0SM_ATCT" Time, Drag the characteristic "0CALDAY" Calendar day ,

change the description to Day .

b. In the area of "Default Values", double click on the field "Day", a popup will be displayed.

Move variable "Calendar Day " to the "Chosen Selections" list , click on "OK"

.

c. From Dimension "0SM_ATCT" Time, Drag the characteristic "0CALMONTH" Calendar

month, change the description to MONTH.

d. In the area of "Default Values", double click on the field Month , a popup will be

displayed . Move "Calendar Year/Month" to the Chosen Selections list , Click on "OK" .




Copyright/Trademark

e. From Dimension "0SM_ATCT" Time, Drag the characteristic "0CALWEEK" Calendar

week, change the description to WEEK.

f. In the area of "Default Values", double click on the field WEEK, a popup will be

displayed. Move "Calendar year / week" to the Chosen Selections list, Click on "OK .




Copyright/Trademark

g. From Dimension "0SM_ATCT" Time, Drag the characteristic "0CALYEAR" Calendar day

, change the description to YEAR.

h. In the area of "Default Values", double click on the filed YEAR , a popup will be

displayed . Move "Calendar Year" to the Chosen Selections list , Click on "OK"

i. Select "Default Value", Drag “[0SMD_LSID] System ID of dimension “[0SM_ATC2]

Landscape ” into the area “Default Value' , Change the description to SYS_ID .

j. In the "Default Value" Area select the SYS_ID and double, a popup window will be

displayed. Select "Variables" and move "System ID (multiple single values) mandatory"

to the Chosen Selections list, Click on "OK".




Copyright/Trademark

e. From Dimension "0SM_ATC3" Key information, Drag the characteristic

"0SM_ATC_USER" Object name, change the description to "USER".

f. In the "Default Value" Area select the USER and double, a popup window will be

displayed. Select "Variables" and move "USER" to the Chosen Selections list, Click on

"OK"

f. From Dimension "0SM_ATC3" Key information, Drag the characteristic "0SM_CCLDV"Object name, change the description to "DEV_CLASS".




Copyright/Trademark

5. Rows

Once step 4 is successfully executed, Move to the tab "Rows/Columns" and drag and drop All

the fields in the "Free Characteristics" area to the Column Area .

6. Columns

From the Key Figure part of the info provider drag and drop the following key figures: Priority 1,

Priority 2 and Priority 3 to the Columns area. And adjust the description same as below

screenshot.


a. For ALL the fields in the " Rows" area execute b and c



8. Save query


b. In the dialog enter “0SM_ATC_DAILY_DETAILS” as description

c. Enter “0SM_ATC_DAILY_DETAILS” as Technical Name

d. Click Save



Note 2070831 - Create Missing Queries to ST-BCO SP10

Documents

Transcript of Note 2070831 - Create Missing Queries to ST-BCO SP10