North/Latin America …monitor.espec.ws/files/12092412348706_176.pdfWindows EDID V1.0 User Manual...
Transcript of North/Latin America …monitor.espec.ws/files/12092412348706_176.pdfWindows EDID V1.0 User Manual...
Copyright © 2010 LG Electronics. Inc. All right reserved. - 1 - LGE Internal Use Only Only for training and service purposes
North/Latin America http://aic.lgservice.com Europe/Africa http://eic.lgservice.com Asia/Oceania http://biz.lgservice.com
COLOR MONITOR SERVICE MANUAL
MODEL: E2360S (E2360S-PNW.A**NAP for LGD LM230WF5-TRA1)/
E2360T (E2360T-PNW.A**NAP forLGD LM230WF5-TRA1) **Sales Market
CAUTION BEFORE SERVICING THE UNIT, READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
*To apply the M-STAR Chip.
Internal Use Only
Copyright © 2010 LG Electronics. Inc. All right reserved. - 2 - LGE Internal Use Only Only for training and service purposes
CONTENTS SPECIFICATIONS ..........................................................2 PRECAUTIONS ..............................................................3 TIMING CHART ..............................................................7 DISASSEMBLY .............................................................8 BLOCK DIAGRAM.........................................................10 DISCRIPTION OF BLOCK DIAGRAM ......................... 12
ADJUSTMENT ............................................................. 13 SERVICE MODE ......................................................... 16 TROUBLESHOOTING GUIDE .................................... 17 WIRING DIAGRAM ...................................................... 23 EXPLODED VIEW........................................................ 24 SCHEMATIC DIAGRAM............................................... 26
SPECIFICATIONS
E2360S&T
1. LCD CHARACTERISTICS Type: Flat Panel Active matrix-TFT LCD Active Display Area: 23.0 inches/58.4 cm Pixel Pitch: 0.265 mm x 0.265 mm Surface Treatment: Anti-Glare coating Resolution: Max: VESA 1920x1080@60Hz.
Recommend: VESA 1920x1080@60Hz. Video Input: Signal Input: 15 pin D-Sub Connector; DVI-D Connector (Only for E2360T) Input Form: RGB Analog (0.7 Vp-p/75 ohm) Digital (Only for E2360T) Plug&Play: DDC2AB (Analog)
DDC2B (Digital) (Only for E2360T) 2. POWER SUPPLY 2-1. Power: 12V==3.0A 2-2. Power Consumption
On Mode: 30W (Typ.) Sleep Mode: ≤ 1 W Off Mode: ≤ 0.5 W
3. Sync Input Horizontal Freq. 30 kHz to 83 kHz (Automatic) Vertical Freq. 56 Hz to 75 Hz (Automatic) Input Form Separate Sync. Digital (Only for E2360T)
4. ENVIRONMENT 4-1. Operating Temperature: 10°C to 35°C Humidity: 10 % to 80% non-Condensing 4-2. Storage Temperature: -20°C to 60 °C Humidity: 5 % to 90 % non-Condensing 5. DIMENSIONS (with Stand)
Width 54.23 cm (21.35 inch) Height 41.20 cm (16.22 inch) Depth 17.20 cm (6.77 inch) DIMENSIONS (without Stand) Width 54.23 cm (21.35 inch) Height 40.83 cm (16.07 inch) Depth 3.10 cm (1.22 inch)
6. WEIGHT (excl. packing)
Weight: 2.6 kg (5.73 lb)
Copyright © 2010 LG Electronics. Inc. All right reserved. - 3 - LGE Internal Use Only Only for training and service purposes
Copyright © 2010 LG Electronics. Inc. All right reserved. - 4 - LGE Internal Use Only Only for training and service purposes
Copyright © 2010 LG Electronics. Inc. All right reserved. - 5 - LGE Internal Use Only Only for training and service purposes
Copyright © 2010 LG Electronics. Inc. All right reserved. - 6 - LGE Internal Use Only Only for training and service purposes
Copyright © 2010 LG Electronics. Inc. All right reserved. - 7 - LGE Internal Use Only Only for training and service purposes
TIMING CHART
E2360S&T
Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)
1 720 x 400 31.468 70
2 640 x 480 31.469 60
3 640 x 480 37.500 75
4 800 x 600 37.879 60
5 800 x 600 46.875 75
6 1024 x 768 48.363 60
7 1024 x 768 60.123 75
8 1152 x 864 67.500 75
9 1280 x 1024 63.981 60
10 1280 x 1024 79.976 75
11 1680 x 1050 65.290 60
*12 1920 x 1080 67.500 60
*Recommend Mode
Copyright © 2010 LG Electronics. Inc. All right reserved. - 8 - LGE Internal Use Only Only for training and service purposes
DISASSEMBLY-Set #1
Put the monitor on a soft flat.
#2
Remove the base ass’y. Turn the screw by using the screw handle.
#3
Remove the Rear Cover ass’y.
#4
The Rear Cover ass’y. #5
Disconnect all the wires/FFC cable.
#6
Remove the main frame.
Copyright © 2010 LG Electronics. Inc. All right reserved. - 9 - LGE Internal Use Only Only for training and service purposes
#7 Main frame and main board.
#8
The panel.
Note: DVI only for E2360T.
Copyright © 2010 LG Electronics. Inc. All right reserved. - 10 - LGE Internal Use Only Only for training and service purposes
BLOCK DIAGRAM
Note: DVI only for E2360T.
Scaler IC TSUMU1BRWL3-1/ TSUMU5BRWHL3-1
(U401)
D-SUB (CN101)
Crystal 14.31818MHZ
(X401)
CN401 to Key boardRGB, H/V SYN
DDC1_SCL DDC1_SDA
Flash ROM PM25LD020C-SCE
(U402)
CN409 to Panel
Output
Panel Power sequence control circuit Block (Q301&Q302)
AP2114D-3.3TRG1 (U702)
3.3V
DVI (Optional) (CN102)
RX (0-2, C) P/N
DDC2_SCL DDC2_SDA
Copyright © 2010 LG Electronics. Inc. All right reserved. - 11 - LGE Internal Use Only Only for training and service purposes
CONVERTER BLOCK DIAGRAM Converter
Boost Circuit Ignition LED bar
ON/OFF circuit
Current balance Control IC MP3389EF
(U801)
Feedback circuit
OVP circuit
Current Feedback DIM circuit
12V
BKLT-EN
BKLT-VBRI
Copyright © 2010 LG Electronics. Inc. All right reserved. - 12 - LGE Internal Use Only Only for training and service purposes
DESCRIPTION OF BLOCK DIAGRAM
1. Video Controller Part.
This part amplifies the level of video signal for the digital conversion and converts from the analog video signal to
the digital video signal using a pixel clock.
The pixel clock for each mode is generated by the PLL.
The range of the pixel clock is from 25MHz to 149MHz.
This part consists of the Scalar, ADC converter, TMDS receiver.
The Scalar gets the video signal converted analog to digital, interpolates input to 1920 x 1080 resolution signal and
outputs 8-bit R, G, B signal to transmitter.
2. Power Part.
This part consists of the one 3.3V regulators to convert power which is provided 12V in Adapter board, 12V is
provided for convert circuit.
3. MICOM Part.
This part is including video controller part. And this part consists of Reset IC and the Micom.
The Micom distinguishes polarity and frequencies of the H/V sync are supplied from signal cable.
The controlled data of each mode is stored in scalar.
Copyright © 2010 LG Electronics. Inc. All right reserved. - 13 - LGE Internal Use Only Only for training and service purposes
ADJUSTMENT Windows EDID V1.0 User Manual Operating System: DOS, windows98, 2000, XP 1. Parallel port setting Enter your bios, and do as followings. a) Integrated peripheral b) Super IO Device c) Parallel port mode you should set the” parallel port mode” to SPP for using the DOS EDID tool surely. 2. EDID Write 1. Connect the signal line of monitor with DDC recorder. 2. Choose the DDC RECORD program, and it shows on the screen, then choose the correct source base on the monitor. 3. Click “LoadFile”, then key in the manufacturer name, model name, product code, then choose the correct
model name base on the monitor.(as Fig.2) 4. Scan serial No. to DDC recorder by Bar Reader, then read again in the Verify SN. 5. According to the message of DDC program, when the picture as fig.1 appears, it will show DDC record has finished. E2360S (Analog only)
Copyright © 2010 LG Electronics. Inc. All right reserved. - 14 - LGE Internal Use Only Only for training and service purposes
E2360T (Analog&DVI)
Fig.1 Please check Manufacturer Name, Vendor Assigned Code, Monitor Name, Serial Number:*****[????????*****] (it must be the same as Bar Code),Week of Manufacture:**,Year of Manufacture:****,Checksum:** (It must be the same as the last byte of data table, as follows picture shows). Above of all must be right, then if it shows the green “PASS”, it means record succeeds ,the red “Fail” means record fails; Then check the power supply and signal line, and ensure they are connected well ,then do DDC record again from the third step. E2360S (Analog only)
Copyright © 2010 LG Electronics. Inc. All right reserved. - 15 - LGE Internal Use Only Only for training and service purposes
E2360T (Analog&DVI)
Fig.2
Copyright © 2010 LG Electronics. Inc. All right reserved. - 16 - LGE Internal Use Only Only for training and service purposes
1) Turn off the power switch at the front side of the display. 2) Press MODE, POWER switch with 1 second interval, press MENU. 3) The SVC OSD menu contains additional menus that the User OSD menu as described below. a) CLEAA ETI: NO b) Auto Color: NO c) AGING: Select Aging mode (on/off). d) PANEL: Used panel type e) NVRAM INIT: NO f) R/G/B-9300K: Allows you to set the R/G/B-9300K value manually. g) R/G/B-6500K: Allows you to set the R/G/B-6500K value manually. h) R/G/B-Offset: Allows you to set the R/G/B-Offset value manually. (Analog Only) i) R/G/B-Gain: Allows you to set the R/G/B-Gain value manually. (Analog Only) e) R/G/B-sRGB: Allows you to set the R/G/B- sRGB value manually.
SERVICE MODE
Copyright © 2010 LG Electronics. Inc. All right reserved. - 17 - LGE Internal Use Only Only for training and service purposes
TROUBLESHOOTING GUIDE
1. NO POWER
No Power (Power Indicator Off)
Please reinsert and make sure the AC of 100-240V is normal
Measure U702 PIN2=3.3V
Check the Adapter/convert section
Check CN702 or replace U702
NO
NO
YES
YES
YES
Check X401 oscillate waveforms are normal
Replace X401
Replace U401
NO
Copyright © 2010 LG Electronics. Inc. All right reserved. - 18 - LGE Internal Use Only Only for training and service purposes
2. NO RASTER (OSD IS NOT DISPLAY)-LIPS
LIPS
YES
YES
No Raster (OSD Is Not Displayed)
Check U702 PIN 2 =3.3V?
Check CN702 PIN3 =12V?
Check adapter board and find out a short point as penning each power line
1. Check U702 2. Check C707,C708,C709
NO
NO
Copyright © 2010 LG Electronics. Inc. All right reserved. - 19 - LGE Internal Use Only Only for training and service purposes
3. NO RASTER (OSD IS NOT DISPLAY)-MSTAR
1. Check C426,C428 2. Check X401 3. Trouble in Scaler IC
Scaler pin 98, 99 oscillates as 14.31818MHz?
No Raster (OSD Is Not Displayed)
Check connection line from D-SUB to Scaler
Trouble in cable or LCD module
NO
YES
YES
NO Scaler IC pin 27 H Sync? pin 28 V Sync?
Copyright © 2010 LG Electronics. Inc. All right reserved. - 20 - LGE Internal Use Only Only for training and service purposes
4. TROUBLE IN DPM
Trouble in DPM
Scaler IC pin 27 H Sync? pin 28 V Sync?
Check H/V sync line
Trouble in cable or LCD module
NO
YES
Copyright © 2010 LG Electronics. Inc. All right reserved. - 21 - LGE Internal Use Only Only for training and service purposes
5. POWER
Replace the panel
Check main board
Replace the main board NO
Check CN702=12V?
Check the adapter
YES
NO
YES
No Power (Power Indicator Off)
Check AC line volt
Check the adapter
Check AC line & AC socket
Replace the adapter NO
YES
NO
Copyright © 2010 LG Electronics. Inc. All right reserved. - 22 - LGE Internal Use Only Only for training and service purposes
6. RASTER
Check U401, X401
YES
Check BKLT-VBRI
Check U401
Check Q301, Q302
NO
YES
YES
Check PANEL_VCC
YES
NO
NO Raster (Lamp Off)
Check CN702=12V
Check BKLT-EN signal
Check the adapter
Check Interface section or main board
NO
NO
Copyright © 2010 LG Electronics. Inc. All right reserved. - 23 - LGE Internal Use Only Only for training and service purposes
WIRING DIAGRAM
Main Board
LED BoardKey Board
Optional
Note: DVI only for E2360T.
095G176J-10V01
095G176J-50528
095G8022-7W506
Copyright © 2010 LG Electronics. Inc. All right reserved. - 24 - LGE Internal Use Only Only for training and service purposes
EXPLODED VIEW
Many electrical and mechanical parts in this chassis have special safety-related characteristics.
These parts are identified by in the EXPLODED VIEW.
It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent X-RADIATION, Shock, Fire, or other Hazards. Do not modify the original design without permission of manufacturer.
IMPORTANT SAFETY NOTICE
Copyright © 2010 LG Electronics. Inc. All right reserved. - 25 - LGE Internal Use Only Only for training and service purposes
EXPLODED VIEW PARTS LIST Ref. No. TPV part No. LGE part No. Description
010 705GFACS016 ABJ73308504 BEZEL ASS'Y
020 KEPCAQG1 EBU60704503 KEY BOARD
030 LEPCAQG1 EBU60934810 LED BOARD
040 750GMT230W5A11M0LG COV30101224 PANEL LM230WF5-TRA1-7F1-A0 FQ LTD
050 756GQACB-KL010--00 EBU60714340 MAIN BOARD(CBPCAAWLGQ3)-E2360S
756GQACB-KL009--00 EBU60714341 MAIN BOARD(CBPCAARLGQ3)-E2360T
060 Q15G0909101101 MDQ62638101 MAINFRAME-E2360S
Q15G0909101201 MDQ62638102 MAINFRAME-E2360T
070 705GFACS012 ACQ83873708 REAR COVER ASS'Y-E2360S
705GFACS013 ACQ83873709 REAR COVER ASS'Y-E2360T
080 705GFACS004 ACQ83873802 BASE ASS'Y
090 095G176J-10V01 COV30101415 FFC CABLE 10PIN 275MM 0.5MM
100 095G176J-50528 COV30101418 FFC CABLE 50 182 0.5
110 095G8022-7W506 N/A HARNESS 7P-6P+3P 250/300
120 088G-35315FVCL N/A D-SUB CABLE 1500MM
Copyright © 2010 LG Electronics. Inc. All right reserved. - 26 - LGE Internal Use Only Only for training and service purposes
SCHEMATIC DIAGRAM
E2360S&T
Input (DVI only for E2360T)
DET_VGA
DDC_VCC
DSUB_SCLDDC1_SCL
DDC_VCC
R102 0R01 1/10W
C10647N16V
C1055PF 50V
ZD101RLZ5.6B
C10847N16V
R132 NC/10OHM1/16W
FB106NC/300 OHM
R110470 OHM 1/16W
R11156OHM1/16W
C11047N16V
C118NC/1N 50V
R130 NC/10OHM1/16W
C119NC/1N 50V
R127 NC/10OHM1/16W
R103 1K 1/16W
FB1030R01 1/10W
C125100N 16V
R1072.2K 1/16W
C128NC
C1095PF 50V
I/O11
GND2
I/O23
I/O34VDD5I/O46
U107NC/AZC199-04S
C11447N16V
C127NC
R11456OHM1/16W
C122NC/100N 16V
DAT2-1DAT2+2
2/4shield3
DAT4-4DAT4+ 5
DDC SCL6
DDC SDA7
VSYNC8
DAT1-9DAT1+10
1/3shield11
DAT3-12DAT3+13
+5V14
SYNC GND15
HPD 16
DAT0-17DAT0+18
0/5shield19
DAT5-20DAT5+ 21
clk shield22
clk+23
clk-24
GN
D26
GN
D25
CN102
JACK
I/O11
GND2
I/O23
I/O34VDD5I/O4 6
U104AZC199-04S
R116
75OHM 1/16W
R134 NC/10OHM1/16W
R1254.7K 1/16W
C10322P 50V
C126100N 16V
C117NC/220N16V
R112
75OHM 1/16W
C112NC/100N 16V
C11147N16V
FB1020R01 1/10W
R138NC/4.7K 1/16W
I/O11
GND2
I/O23
I/O34VDD5I/O46
U106NC/AZC199-04S
R1244.7K 1/16W
R137NC/4.7K 1/16W
R11556OHM1/16W
R113
100OHM1/16W
R139NC/1K 1/16W
I/O11
GND2
I/O23
I/O34VDD5I/O46
U105NC/AZC199-04S
R120 NC/10K+-5%1/16W
FB1010R01 1/10W
3
12
D101BAV70
R108
75OHM 1/16W
R1352.2K 1/16W
C115NC/100N 16V
A01
A12
A23
VSS 4SDA5 SCL6 WP7 VCC8
U102
NC/CAT24C02WI-GT3
R136NC/22K 1/16W
R126 NC/10OHM1/16W
R119 NC/100OHM1/16W
C124100N 16V
R11756OHM1/16W
C116220N16V
R128 NC/10OHM1/16W
C10422P 50V
C10247N16V
FB105
NC/300 OHM
C120NC/100N 16V
R101
100OHM1/16W
R131 NC/10OHM1/16W
R10556OHM1/16W
R12322K 1/16W
C121NC/100N 16V
A01
A12
A23
VSS4
SDA5 SCL6 WP7 VCC8
U101
NC/CAT24C02WI-GT3
R104 1K 1/16W
FB104
NC/300 OHM
R10956OHM1/16W
C1071N 50V
3
12
D102NC/BAV70
C1135PF 50V
R129 NC/10OHM1/16W
R118 NC/100OHM1/16W
162738495
11
12
13
14
1510
1716
CN101D-SUB 15P
R1062.2K 1/16W
R1333.9K1/16W
I/O11
GND2
I/O23
I/O34VDD5I/O46
U103AZC199-04S
CMVCC13,4,5
ESD_VCC
DVI_5V
ESD_VCC1
VCC3.3
ESD_VCC
CMVCC1
ESD_VCC1
DVI_5VDSUB_5V
ESD_VCC1
DVI
D-SUB
DDC_WP5
DDC2_SDA 5
RX1N 5
DSUB_V 5
DDC1_SCL5
RX1P 5RX0N 5
DET_CABLE 5
DDC1_SDA5
RXCP 5
RX0P 5
DSUB_H 5
DDC2_SCL 5
DDC_WP5RX2N 5
RXCN 5
DSUB_G- 5
DSUB_G+ 5
RX2P 5
DSUB_SOG 5
DSUB_B+ 5
DSUB_B- 5
DSUB_R+ 5
DSUB_R- 5VGA_R-
DSUB_SCL
DSUB_SDA
VGA_R+ VGA_B+
VGA_G+
V_Sy nc
VGA_G-
DDC1_SDA
DSUB_SDA
H_Sy nc
DDC1_SCL
DDC2_SDADDC2_SCL
DVI_HPD
H_Sy nc
DDC1_SDA
VGA_B-
DDC2_SDA
V_Sy nc
DSUB_5V
RX1P
DET_DVI
VGA_R+
DDC2_SCL
VGA_B+
RX2P
ESD_VCC
DET_VGA
VGA_G-
VGA_G+
RX0N
VGA_R-
VGA_B-
VGA_G+
VGA_B+
RXCN
ESD_VCC1
RX1N
RX0P
VGA_R+
DET_DVI
RX2N
RXCP
DET_VGA
1. Main Board
Copyright © 2010 LG Electronics. Inc. All right reserved. - 27 - LGE Internal Use Only Only for training and service purposes
Output
LV0-LV0+
LV5-LV5+
LV4-LV4+
LV3-LV3+
FLK24P26
ICLK4P23IVDD_OP24IVDD_EP25
ICLK3P22
FLK13P27
ICLK2P21ICLK1P20
POLP16POL2P15
CSCP17
LV1-P10LV1+P11LV0-P12LV0+P13SOEP14
H2DOTP18ICLK_RESETP19
AO3401L
21
PSDA
S
D
S1
S2
S3
G4
D8
D7
D6
D5
U301
NC/AO4411
3C3051UF16V
Q301AO3401A
PSCL
G
123456789
1011121314151617181920212223242526272829303132333435363738394041424344454647484950
5152
CN409
CONN
R3034.7K 1/16W
Q302
LMBT3904LT1G
R307NC
1 2
FB301
120 OHM
C301100N 16V
R306
100K 1/16W
C30222UF 16V
C303220N16V
R304
22K 1/16W
R30510K+-5%1/16W
C304100N 16V
CMVCC12,4,5
PANEL_VCC
CMVCC1
PANEL_VCCCMVCC1
P[0..27]5
PSCL5PSDA5
PPWR_ON#5
P6 LCLK-P5 LV3+
P0 LV5-
P4 LV3-P3 LV4+
P1 LV5+
P7 LCLK+
P[0..27]
FLK13FLK24
P8 LV2-
IVDD_EIVDD_OICLK4ICLK3ICLK2ICLK1ICLK_RESET
H2DOT
POLPOL2SOE
R302
300 OHM
R301
300 OHM
CSC
P9 LV2+
P2 LV4-
LCLK-LCLK+
LV2-LV2+
LV1-LV1+
Copyright © 2010 LG Electronics. Inc. All right reserved. - 28 - LGE Internal Use Only Only for training and service purposes
Power
2010/3/23
Place a large Padwith TOP
SOT 252
SOT 223
SOT 263
SOT 252
3
21 CN702
JACK
VIN3
VOUT2
GN
D1
U701
NC/G1084-33TU3Uf
VIN3 VOUT 2
GN
D1
U703
NC/LSP2159BD18AD
R70210K+-5%1/16W
C72010uF 25V
C709100N 16V
C724NC/1UF16V
C72310uF 25V
R70510K+-5%1/16W
C713100NF 25V
12
D703
SR34
C706100N 16V
R70310K+-5%1/16W
VI3
VO2
GN
D1
U704AP2114H-1.8TRG1
R7137.5K 1%
R712100K 1/16W
C70422UF 16V
12
D704
SR34
R706
100OHM1/16W
C7151N 50V
R726100K 1/16W
Q701LMBT3904LT1G
C712100NF 25V
+C716470uF 10V
C708100N 16V
12
D701SM340A
12
D707
SR34
SW1
EN2
COMP 3
FB 4GND5 FREQ6 VIN7 BST8 Thermal Pad9
U705
MP1584EN
C721100N 16V
C702100N 16V
C717100N 16V
1 2
FB701
BEAD
C722150pF 50V
R7141.3K 1%
R727300K
12
D708
SR34
C719100NF 25V
C70722UF 16V
R71133K 1/16W 5%
C705100N 16V
1 2
FB702
30R/700mA
R704 22K 1/16W
+C718180uF 16V
3
21
CN701
NC/JACK
VIN3 VOUT 2
GN
D1
U702
AP2114D-3.3TRG1
L701 22UH
C7101N 50V
12
ZD702NC/RLZ6.2B
CMVCC1CMVCC1
CMVCC1 2,3,5
VCC1.8
CMVCC1
CMVCC1
CMVCC1
VCC3.3
VCC3.3
on_BACKLIGHT 5
+12V
BKLT-VBRI6
BKLT-EN6
adj_BACKLIGHT 5
+12V 6 LGE Used
OTSUsed
Copyright © 2010 LG Electronics. Inc. All right reserved. - 29 - LGE Internal Use Only Only for training and service purposes
Scaler
R40610K+-5%1/16W
R433
3.9K1/16W
R440
10K+-5%1/16W
R415 0R05OHM1/16W
R444 0R05OHM1/16W
C42710uF 10V
R418 NC/0R05OHM1/16W
C417
100N 16V
C402
100N 16V
C42647pF 50V
246
135
CN402NC/CONN
ZD402
NC
/RLZ
5.6B
R436 100OHM1/16W
R442
NC
C401
100N 16V
R437 100OHM1/16W
C440
NC
C415
100N 16V
NC 1
E12
E2 3
VSS 4SDA5 SCL6 WC7 VCC8
U403
NC/M24C04-WMN6TP
12
X40114.31818MHZ/32PF
R451100 OHM 1/10W
WP
Q403NC/LMBT3904LT1G
C407
100N 16V
C416
100N 16V
C436
100N
16V
ZD403
NC
/RLZ
5.6B
C435
100N
16V
C418
100N 16V
C434
100N
16V
1 2
FB409 120 OHM
VCC3.32,4
VCC3.3
VCC1.84
VDDC
VDDPVCC3.3
CMVCC1
VCC1.8VCC3.3 AVDDVDDC
CMVCC1
AVDD
VCC3.3
VDDP
VCC3.3
VCC3.3
DDC1_SCL2
DSUB_H2
DSUB_R+2
DSUB_G+2
RX1N2
RX0N2
adj_BACKLIGHT 4
DSUB_V2
DET_CABLE 2
DDC2_SCL2
DDC1_SDA2
DSUB_SOG2
RXCP2
DSUB_R-2
DDC2_SDA2
DSUB_G-2
RX1P2
RX2P2
RX0P2
DSUB_B-2
DDC_WP 2
DSUB_B+2
RXCN2
RX2N2
P[0..27] 3
PSDA 3PSCL 3
PSCL 3
on_BACKLIGHT 4
PPWR_ON# 3
PPWR_ON# 3
PSDA 3
TSUMU1BRWL356G 562344
1Analog+1DVI
TSUMU5BRWHL3-156G 562342
TSUMU1BRWL3-156G 562345
TSUM5ARWHL356G 562346
UXGA / WSXGA+ (1680x1050,1600x900)
1Analog
WXGA / WXGA+ (1440x900/1366x768/1280x1024)
TSUMU5BRWHL356G 562347
U401
TSUM1ARWL356G 562343
WUXGA / FHD (1920x1200/1920x1080)
C406
100N 16V
TOUCH
P[0..27]
C4222.2UF 16V
Panel_ON
AHS0AVS0
B0-B0+
SOG_DET
G0+G0-
R0+R0-
LED_ORANGELED_GRN/BLUE
DDCSDA1
RIN0P26
GIN0P23
SOGIN024
BIN0P21
RIN0M25
GIN0M22
BIN0M20
HSYNC027
VSYNC028
SDO36
SCK38 CSZ37
SDI39
FLK2449
GPIO_P43/PWM0 1
LV4+75
XOUT98
XIN99
LV3- 74
LV3+ 73
LVCLK- 72
LVCLK+71
LV2-70
LV2+ 69
LV1- 68
LV1+ 67
LV0-66
LV0+ 65
SOE 62
POL261
POL 60
CSC 59
H2DOT 58
ICLK_RESET/GSP 56
LV4- 76LV5+ 78LV5- 79
GN
D2
GN
D8
NC6
NC7
NC9
NC10
AVD
D_3
311
NC12
NC13
NC15
NC16
GN
D14
GN
D17
GN
D45
VDD
P77
VDD
P57
MODE29
VCTRL 80
VDD
C19
DDCA_SDA/RS232_TX30
DDCA_SCL/rs232_RX31
NC3
NC4
GPIO_P40/PWM132
AVD
D_3
318
VDD
P83
IVDD_E/GOE 50
GPIO_P06/PWM1 93
FLK13 48
GPIO_P00/SAR1 90
GPIO_P01/SAR2 91
GPIO_P02/SAR3 92
GPIO_P07/PWM2 94
GPIO_P23/PWM1 5
GPIO_P41/PWMA 41
GPIO_P13/PWM3 96
GPIO_P26/PWM095
I2C_MDA/GPIO_P11 33I2C_MCL/GPIO_P1034
RST84
ICLK4 52
IVDD_O/DPM 51
AVD
D_3
310
0
VDD
P35
VDD
P47
VDD
C40
VDD
C63
VDD
C81
GN
D64
GN
D82
GPIO_P17/SAR089
ICLK1/GSC 55
ICLK2 54
ICLK353
GPIO_P42/PWMB 42
GPIO_P24/PWM2 43
GPIO_P27/PWM244
GPIO_P1246
GPIO_P12/PWM3 85
GPIO_P25/PWM1 86
GPIO_P08 87
GPIO_P09 88
VDD
C97
TSUMU1BRWL3-LF-1
U401
RX0-
DDCSDA2
GPIO wakeup input: GPIO_P43 (GPIO source 0) #1 GPIO_P40 (GPIO source 1) #32 GPIO_P25 (GPIO source 2) #86 GPIO_P41 (GPIO source 3) #41
DVI 5V detection (0) PAD_GPIO_08:pin #87 (BK4_23h[1:0] set 0) (1) PAD_GPIO_12:pin #46 (BK4_23h[1:0] set 2)
RX2+
LED_R
RX0+
KEY2
KEY1KEY2
MSCL
MSDA
RXC+
RX1-
LED_G
RX1+
RXC-
KEY1
POWER_KEY#
DET_CABLE
POWER_KEY#
DDCSCL1
DDCSCL2
RX2-
EE_WP
CMVCC1
CMVCC1 2,3,4
R4050R01 1/10W
R41210K 1/16W 5%
R4040R01 1/10W
R410
2K2 1/16W 5%
LED_R
LED_G
1
23
Q401LMBT3906LT1G
1
23
Q402LMBT3906LT1G
P20
R411
2K2 1/16W 5%
LED_GRN/BLUE
R41310K 1/16W 5%
CMVCC1
LED_ORANGE
adj_BACKLIGHT
KEY1POWER_KEY#LED_R
KEY2LED_G
KEY2
LED_G
KEY1
POWER_KEY#
LED_R
TOUCH
MSDA
EE_WP
P25
P7
P19
P10
P23
P14
P17
P12
P18
P24
P26
P11
P16
P13
P21
P2
P22
P8
P5P4P3
P1
P15
P27
P6
P0
P9
WP
DDC_WP
on_BACKLIGHT
R450NC/10K+-5%1/16W
R414 100OHM1/16W
C432
100N
16V
R431
3.9K1/16W
R435
NC/22K1/16W
1
3
5
7
2
4
6
CN403NC/CONN
C413
10uF 10V
CE#1
SO2
WP#3
GND4
VDD 8
HOLD#7
SCK6
SI 5
U402
Pm25LD020C-SCE
R40210K+-5%1/16W
R432
3.9K1/16W
C414
100N 16V
1234567
CN401
CONN
R420 NC/0R05OHM1/16W
ZD401
NC
/RLZ
5.6B
FB401
300OHMC403
100N 16V
R401 100OHM1/16W
1 2
FB408 NC/120 OHM
C42847pF 50V
R441
10K+-5%1/16W
FB403
300OHM
MSCL
R728 0R05OHM1/16W
C433
100N
16V
R416 0R05OHM1/16W
R419 NC/0R05OHM1/16W
R426 100OHM1/16W
R403
100K1/16W
C421
100N 16V
R443 0R05OHM1/16W
C441
NC
FB402
300OHM
C429
220N16V
C423
100N 16V
C431
100N
16V
Copyright © 2010 LG Electronics. Inc. All right reserved. - 30 - LGE Internal Use Only Only for training and service purposes
Convert
R809
6.2KOHM +-1% 1/10W
+C807
4.7UF 100V
Set WLEDcurrent
for currentlimit
Set OVP
R842
2.2 OHM 1/10W
R8160.3 OHM
R8120.3 OHM
R834
200KOHM 1/10W
R805300K 1/8W
R827 1R 1/10W 5%
C804
0.47UF 50V
C802
68NF 50VR806
1K 1/10W
C801
0.47uF 16V
R819 30KOHM +-1% 1/10W
R810
20K 1/10W
L801
47UH1 2
D801
SK310B+C811180uF 16V
R830 1R 1/10W 5%
123456789
10
1112
CN803
CONN
C809
100pF 50V
R8180R05 1/4W
NC1
VIN2
VCC3
COMP4
EN5
DBRT6
GND7
OSC8
ISET9
BOSC10
LED1211
LED1112
LED1013
LED914
LED815LED716LED617LED518LED419LED320LED221LED122OVP23ISENSE24PGND25GATE26VFAULT27NC28
E-P
ad29
U801
MP3389EF
C806
100pF 50V
R8360R01 1/10W
R808
1K 1/10W
R841150 OHM 1/10W
R80110 OHM 1/10W
R807
20K 1/10W
R8320R01 1/10W
R829 NC/1 OHM 1/10W
R8400R01 1/10W
C805
100pF 50V
R803 51KOHM +-1% 1/10W
R802 270K +-1% 1/10W
R831 NC/1 OHM 1/10W
C8101uF 25V
R804
100K 1/10W R828 1R 1/10W 5%
R813
0R05 4A 1/4W
R833NC/0R01 1/10W
R839NC/0R01 1/10W
S1
1
G1
2
S2
3
G2
4
D1
8
D1
7
D2
6
D2
5
Q806P8008HV
C803
0.47UF 50V
GND_POWER
+12V
GND_POWERDGND
GND_POWERGND_POWER
GND_POWER
GND_POWER
+12V 4,6
GND_POWER
GND_POWER
GND_POWER
BKLT-VBRI4
BKLT-EN4
OVP
R832,R836,R840-->0ohmR831,R829,R833,R839-->NCR828-->1ohmR819-->30K ---Set WLED current
R809 5.6K ---Set OVPR812-->0.15ohm for currentlimit
R833,R839-->0ohmR831,R832,R836,R840-->NCR828,R829-->1ohmR819-->10K ---Set WLED current
R809 5.6K ---Set OVPR812-->0.15ohm ---for current limit
LM185WH2-TRA1
LM215WF4-TRA1
WXGA+ (1366x768) /18.5〃
Panel Size & Resolution
LM200WD3-TRA1
FHD (1920x1080) /23〃
Panel Type Different table
LM230WF5-TRA1
FHD (1920x1080) /21.5〃
WSXGA+ (1600x900) /20〃
OVP
Copyright © 2010 LG Electronics. Inc. All right reserved. - 31 - LGE Internal Use Only Only for training and service purposes
12
ZD006MLVS0402M04
MENU
GND
12
4 3
5SW001
SW
EXIT
LBADC1LBADC2
AUTO POWER12
4 3
5SW002
SW
12
4 3
5SW003
SW
R001 3K3 1/10W 1%
12
4 3
5SW004
SW12
ZD001MLVS0402M04
12
4 3
5SW005
SW
12
4 3
5SW006
SW
123456
78 CN001
CONN
R002 2K2 1/10W 1%
R005 2K2 1/10W 1%
1PowerEXITSOURCEAUTOMODEMENUCON001
R003 1.5K +-1% 1/10W
MODE
R004 3K3 1/10W 1%
R0061.5K +-1% 1/10W
SOURCE
6P
GND
C002
100N16V
12
ZD002MLVS0402M04
C001
100N16V
12
ZD003MLVS0402M04
12
ZD004MLVS0402M04
12
ZD005MLVS0402M04
2. Key Board
Copyright © 2010 LG Electronics. Inc. All right reserved. - 32 - LGE Internal Use Only Only for training and service purposes
123
45
CN002CONN
C012
100N16V
LED_BLUE
CN002 LED B/R12
3 4
RED
BLUE
LED002LED
123 4
RED
BLUE
LED003LED
1
LED_RED
LED B/R LED B/R
Right Angle
GND12
3 4
RED
BLUE
LED001LED
C011
100N16V
3. LED Board
Copyright © 2010 LG Electronics. Inc. All right reserved. - 33 - LGE Internal Use Only Only for training and service purposes
Jul.2010 P/NO: Printed in China