North/Latin America Europe/Africa...

Printed in KoreaP/NO : MFL67840105(1312-REV00)

CHASSIS : EA34D

MODEL : 55EA8800 55EA8800-UCCAUTIONBEFORE SERVICING THE CHASSIS,READ THE SAFETY PRECAUTIONS IN THIS MANUAL.

OLED TVSERVICE MANUAL

North/Latin America http://aic.lgservice.comEurope/Africa http://eic.lgservice.comAsia/Oceania http://biz.lgservice.com

Internal Use Only

- 2 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.Only for training and service purposes

CONTENTS

CONTENTS .............................................................................................. 2

PRODUCT SAFETY ................................................................................. 3

SPECIFICATION ....................................................................................... 4

ADJUSTMENT INSTRUCTION .............................................................. 11

EXPLODED VIEW .................................................................................. 23

SCHEMATIC CIRCUIT DIAGRAM ..............................................................


Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in the Schematic Diagram and Exploded View.It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent Shock, Fire, or other Hazards. Do not modify the original design without permission of manufacturer.

General Guidance

An isolation Transformer should always be used during the servicing of a receiver whose chassis is not isolated from the AC power line. Use a transformer of adequate power rating as this protects the technician from accidents resulting in personal injury from electrical shocks.

It will also protect the receiver and it's components from being damaged by accidental shorts of the circuitry that may be inadvertently introduced during the service operation.

If any fuse (or Fusible Resistor) in this TV receiver is blown, replace it with the specified.

When replacing a high wattage resistor (Oxide Metal Film Resistor, over 1 W), keep the resistor 10 mm away from PCB.

Keep wires away from high voltage or high temperature parts.

Before returning the receiver to the customer,

always perform an AC leakage current check on the exposed metallic parts of the cabinet, such as antennas, terminals, etc., to be sure the set is safe to operate without damage of electrical shock.

Leakage Current Cold Check(Antenna Cold Check)With the instrument AC plug removed from AC source, connect an electrical jumper across the two AC plug prongs. Place the AC switch in the on position, connect one lead of ohm-meter to the AC plug prongs tied together and touch other ohm-meter lead in turn to each exposed metallic parts such as antenna terminals, phone jacks, etc. If the exposed metallic part has a return path to the chassis, the measured resistance should be between 1 MΩ and 5.2 MΩ. When the exposed metal has no return path to the chassis the reading must be infinite.An other abnormality exists that must be corrected before the receiver is returned to the customer.

Leakage Current Hot Check (See below Figure) Plug the AC cord directly into the AC outlet.

Do not use a line Isolation Transformer during this check. Connect 1.5 K / 10 watt resistor in parallel with a 0.15 uF capacitor between a known good earth ground (Water Pipe, Conduit, etc.) and the exposed metallic parts.Measure the AC voltage across the resistor using AC voltmeter with 1000 ohms/volt or more sensitivity.Reverse plug the AC cord into the AC outlet and repeat AC voltage measurements for each exposed metallic part. Any voltage measured must not exceed 0.75 volt RMS which is corresponds to 0.5 mA.In case any measurement is out of the limits specified, there is possibility of shock hazard and the set must be checked and repaired before it is returned to the customer.

Leakage Current Hot Check circuit

IMPORTANT SAFETY NOTICE

SAFETY PRECAUTIONS


SERVICING PRECAUTIONSCAUTION: Before servicing receivers covered by this service manual and its supplements and addenda, read and follow the SAFETY PRECAUTIONS on page 3 of this publication.NOTE: If unforeseen circumstances create conflict between the following servicing precautions and any of the safety precautions on page 3 of this publication, always follow the safety precautions. Remember: Safety First.

General Servicing Precautions1. Always unplug the receiver AC power cord from the AC power

source before;a. Removing or reinstalling any component, circuit board mod-

ule or any other receiver assembly.b. Disconnecting or reconnecting any receiver electrical plug or

other electrical connection.c. Connecting a test substitute in parallel with an electrolytic

capacitor in the receiver.CAUTION: A wrong part substitution or incorrect polarity installation of electrolytic capacitors may result in an explo-sion hazard.

2. Test high voltage only by measuring it with an appropriate high voltage meter or other voltage measuring device (DVM, FETVOM, etc) equipped with a suitable high voltage probe.Do not test high voltage by "drawing an arc".

3. Do not spray chemicals on or near this receiver or any of its assemblies.

4. Unless specified otherwise in this service manual, clean electrical contacts only by applying the following mixture to the contacts with a pipe cleaner, cotton-tipped stick or comparable non-abrasive applicator; 10 % (by volume) Acetone and 90 % (by volume) isopropyl alcohol (90 % - 99 % strength)CAUTION: This is a flammable mixture.Unless specified otherwise in this service manual, lubrication of contacts in not required.

5. Do not defeat any plug/socket B+ voltage interlocks with which receivers covered by this service manual might be equipped.

6. Do not apply AC power to this instrument and/or any of its electrical assemblies unless all solid-state device heat sinks are correctly installed.

7. Always connect the test receiver ground lead to the receiver chassis ground before connecting the test receiver positive lead.Always remove the test receiver ground lead last.

8. Use with this receiver only the test fixtures specified in this service manual.CAUTION: Do not connect the test fixture ground strap to any heat sink in this receiver.

Electrostatically Sensitive (ES) DevicesSome semiconductor (solid-state) devices can be damaged eas-ily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor “chip” components. The following techniques should be used to help reduce the incidence of component dam-age caused by static by static electricity.1. Immediately before handling any semiconductor component or

semiconductor-equipped assembly, drain off any electrostatic charge on your body by touching a known earth ground. Alter-natively, obtain and wear a commercially available discharging wrist strap device, which should be removed to prevent poten-tial shock reasons prior to applying power to the unit under test.

2. After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface such as aluminum foil, to prevent electrostatic charge buildup or expo-sure of the assembly.

3. Use only a grounded-tip soldering iron to solder or unsolder ES devices.

4. Use only an anti-static type solder removal device. Some solder removal devices not classified as “anti-static” can generate electrical charges sufficient to damage ES devices.

5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ES devices.

6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most replacement ES devices are packaged with leads electri-cally shorted together by conductive foam, aluminum foil or comparable conductive material).

7. Immediately before removing the protective material from the leads of a replacement ES device, touch the protective material to the chassis or circuit assembly into which the device will be installed.CAUTION: Be sure no power is applied to the chassis or circuit, and observe all other safety precautions.

8. Minimize bodily motions when handling unpackaged replace-ment ES devices. (Otherwise harmless motion such as the brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity suf-ficient to damage an ES device.)

General Soldering Guidelines1. Use a grounded-tip, low-wattage soldering iron and appropriate

tip size and shape that will maintain tip temperature within the range or 500 °F to 600 °F.

2. Use an appropriate gauge of RMA resin-core solder composed of 60 parts tin/40 parts lead.

3. Keep the soldering iron tip clean and well tinned.4. Thoroughly clean the surfaces to be soldered. Use a mall wire-

bristle (0.5 inch, or 1.25 cm) brush with a metal handle.Do not use freon-propelled spray-on cleaners.

5. Use the following unsoldering techniquea. Allow the soldering iron tip to reach normal temperature.

(500 °F to 600 °F)b. Heat the component lead until the solder melts.c. Quickly draw the melted solder with an anti-static, suction-

type solder removal device or with solder braid.CAUTION: Work quickly to avoid overheating the circuit board printed foil.

6. Use the following soldering technique.a. Allow the soldering iron tip to reach a normal temperature

(500 °F to 600 °F)b. First, hold the soldering iron tip and solder the strand against

the component lead until the solder melts.c. Quickly move the soldering iron tip to the junction of the

component lead and the printed circuit foil, and hold it there only until the solder flows onto and around both the compo-nent lead and the foil.CAUTION: Work quickly to avoid overheating the circuit board printed foil.

d. Closely inspect the solder area and remove any excess or splashed solder with a small wire-bristle brush.


IC Remove/ReplacementSome chassis circuit boards have slotted holes (oblong) through which the IC leads are inserted and then bent flat against the cir-cuit foil. When holes are the slotted type, the following technique should be used to remove and replace the IC. When working with boards using the familiar round hole, use the standard technique as outlined in paragraphs 5 and 6 above.

Removal1. Desolder and straighten each IC lead in one operation by

gently prying up on the lead with the soldering iron tip as the solder melts.

2. Draw away the melted solder with an anti-static suction-type solder removal device (or with solder braid) before removing the IC.

Replacement1. Carefully insert the replacement IC in the circuit board.2. Carefully bend each IC lead against the circuit foil pad and

solder it.3. Clean the soldered areas with a small wire-bristle brush.

(It is not necessary to reapply acrylic coating to the areas).

"Small-Signal" Discrete TransistorRemoval/Replacement1. Remove the defective transistor by clipping its leads as close

as possible to the component body.2. Bend into a "U" shape the end of each of three leads remaining

on the circuit board.3. Bend into a "U" shape the replacement transistor leads.4. Connect the replacement transistor leads to the corresponding

leads extending from the circuit board and crimp the "U" with long nose pliers to insure metal to metal contact then solder each connection.

Power Output, Transistor DeviceRemoval/Replacement1. Heat and remove all solder from around the transistor leads.2. Remove the heat sink mounting screw (if so equipped).3. Carefully remove the transistor from the heat sink of the circuit

board.4. Insert new transistor in the circuit board.5. Solder each transistor lead, and clip off excess lead.6. Replace heat sink.

Diode Removal/Replacement1. Remove defective diode by clipping its leads as close as pos-

sible to diode body.2. Bend the two remaining leads perpendicular y to the circuit

board.3. Observing diode polarity, wrap each lead of the new diode

around the corresponding lead on the circuit board.4. Securely crimp each connection and solder it.5. Inspect (on the circuit board copper side) the solder joints of

the two "original" leads. If they are not shiny, reheat them and if necessary, apply additional solder.

Fuse and Conventional ResistorRemoval/Replacement1. Clip each fuse or resistor lead at top of the circuit board hollow

stake.2. Securely crimp the leads of replacement component around

notch at stake top.

3. Solder the connections.CAUTION: Maintain original spacing between the replaced component and adjacent components and the circuit board to prevent excessive component temperatures.

Circuit Board Foil RepairExcessive heat applied to the copper foil of any printed circuit board will weaken the adhesive that bonds the foil to the circuit board causing the foil to separate from or "lift-off" the board. The following guidelines and procedures should be followed whenever this condition is encountered.

At IC ConnectionsTo repair a defective copper pattern at IC connections use the following procedure to install a jumper wire on the copper pattern side of the circuit board. (Use this technique only on IC connec-tions).

1. Carefully remove the damaged copper pattern with a sharp knife. (Remove only as much copper as absolutely necessary).

2. carefully scratch away the solder resist and acrylic coating (if used) from the end of the remaining copper pattern.

3. Bend a small "U" in one end of a small gauge jumper wire and carefully crimp it around the IC pin. Solder the IC connection.

4. Route the jumper wire along the path of the out-away copper pattern and let it overlap the previously scraped end of the good copper pattern. Solder the overlapped area and clip off any excess jumper wire.

At Other ConnectionsUse the following technique to repair the defective copper pattern at connections other than IC Pins. This technique involves the installation of a jumper wire on the component side of the circuit board.

1. Remove the defective copper pattern with a sharp knife.Remove at least 1/4 inch of copper, to ensure that a hazardous condition will not exist if the jumper wire opens.

2. Trace along the copper pattern from both sides of the pattern break and locate the nearest component that is directly con-nected to the affected copper pattern.

3. Connect insulated 20-gauge jumper wire from the lead of the nearest component on one side of the pattern break to the lead of the nearest component on the other side.Carefully crimp and solder the connections.CAUTION: Be sure the insulated jumper wire is dressed so the it does not touch components or sharp edges.


SPECIFICATIONNOTE : Specifications and others are subject to change without notice for improvement.

1. Application rangeThis spec sheet is applied LED TV with (LA34N) chassis

2. Test conditionEach part is tested as below without special notice.

1) Temperature : 25 ºC ± 5 ºC(77 ± 9 ºF) , CST : 40 ºC±5 ºC2) Relative Humidity: 65 % ± 10 %3) Power Voltage

Market Input voltage Frequency Remark

USA 110~240V 50/60Hz Standard Voltage of each product is marked by models

4) Specification and performance of each parts are followed each drawing and specification by part number in accordance with BOM

5) The receiver must be operated for about 20 minutes prior to the adjustment

3. Test method1) Performance: LGE TV test method followed 2) Demanded other specification

Safety : UL, CSA, CE, IEC specificationEMC: FCC, ICES, CE, IEC specificationWireless : Wireless HD Specification (Option)

4. General SpecificationNo Item Specification Remark

1 Market 1) North America

2 Broad casting System 1) ATSC / NTSC-M

3 Receiving System 1) ATSC / NTSC-M

4 Input Voltage AC 100 - 240V ~ 60Hz

5 Available Channel 1) VHF : 02~132) UHF : 14~693) DTV : 02-694) CATV : 01~1355) CADTV : 01~135

7 Aspect Ratio 16:9

8 Tuning System FS

9 LCD Module LC550LUD-MFP2 LGD

10 Operating Environment 1) Temp : 0 ~ 40 deg2) Humidity : ~ 80 %

11 Storage Environment 1) Temp : -20 ~ 60 deg2) Humidity : ~ 85 %


5. External input format5.1. 2D mode5.1.1. Component input (Y, CB/PB, CR/PR)

No. Resolution H-freq(kHz) V-freq.(kHz) Pixel clock Proposed

1. 720*480 15.73 60.00 13.5135 SDTV ,DVD 480I

2. 720*480 15.73 59.94 13.50 SDTV ,DVD 480I

3. 720*480 31.50 60.00 27.027 SDTV 480P

4. 720*480 31.47 59.94 27.00 SDTV 480P

5. 1280*720 45.00 60.00 74.25 HDTV 720P

6. 1280*720 44.96 59.94 74.176 HDTV 720P

7. 1920*1080 33.75 60.00 74.25 HDTV 1080I

8. 1920*1080 33.72 59.94 74.176 HDTV 1080I

9. 1920*1080 67.50 60.00 148.50 HDTV 1080P

10. 1920*1080 67.432 59.94 148.352 HDTV 1080P

11. 1920*1080 27.00 24.00 74.25 HDTV 1080P

12. 1920*1080 26.97 23.94 74.176 HDTV 1080P

13. 1920*1080 33.75 30.00 74.25 HDTV 1080P

14. 1920*1080 33.71 29.97 74.176 HDTV 1080P

5.1.2. HDMI Input 1 (PC/DTV)

No. Resolution H-freq(kHz) V-freq.(kHz) Pixel clock(MHz) Proposed

HDMI-PC DDC

1 640*350 31.468 70.09 25.17 EGA Х

2 720*400 31.469 70.08 28.32 DOS O

3 640*480 31.469 59.94 25.17 VESA(VGA) O

4 800*600 37.879 60.31 40.00 VESA(SVGA) O

5 1024*768 48.363 60.00 65.00 VESA(XGA) O

6 1152*864 54.348 60.053 80.00 VESA O

7 1280*1024 63.981 60.020 108.00 VESA (SXGA) O

8 1360*768 47.712 60.015 85.50 VESA (WXGA) O

9 1920*1080 67.5 60 148.5 WUXGA(Reduced Blanking) O

HDMI-DTV

1 720*480 31.47 60 27.027 SDTV 480P

2 720*480 31.47 59.94 27.00 SDTV 480P

3 1280*720 45.00 60.00 74.25 HDTV 720P

4 1280*720 44.96 59.94 74.176 HDTV 720P

5 1920*1080 33.75 60.00 74.25 HDTV 1080I

6 1920*1080 33.72 59.94 74.176 HDTV 1080I

7 1920*1080 67.500 60 148.50 HDTV 1080P

8 1920*1080 67.432 59.939 148.352 HDTV 1080P

9 1920*1080 27.000 24.000 74.25 HDTV 1080P

10 1920*1080 26.97 23.976 74.176 HDTV 1080P

11 1920*1080 33.75 30.000 74.25 HDTV 1080P

12 1920*1080 33.71 29.97 74.176 HDTV 1080P


No. Resolution H-freq(kHz) V-freq.(Hz) Pixel clock(MHz) Proposed Remark

1 1920*1080 45.00 60 74.25 HDTV 1080I Side by Side, Top & Bottom

2 1280*720 45.00 60 74.25 HDTV 720P Side by Side, Top & Bottom


1 1280*720p 45.00 60.00 74.25 Side by Side , Top & Bottom,Single Frame Sequential

2 1920*1080i 33.75 60.00 74.25 Side by Side, Top & Bottom

3 1920*1080p 67.50 60.00 148.50 Side by Side , Top & BottomCheckerboard, Single Frame SequentialRow Interleaving, Column Interleaving

4 1920*1080p 27.00 24.000 74.25 Side by Side , Top & BottomCheckerboard

5 1920*1080p 33.75 30.000 74.25 Side by Side, Top & BottomCheckerboard


1 1280*720p 89.91 / 90.00 59.94 / 60.00 148.35 / 148.50 Mandatory Frame Packing,

2 1280*720p 44.96 / 45.00 59.94 / 60.00 74.18 / 74.25 Mandatory Top & Bottom

3 1920*1080i 33.72 / 33.75 59.94 / 60.00 74.18 / 74.25 Mandatory Side by Side (Half)

4 1920*1080p 43.94 / 54.00 23.97 / 24.00 148.35 / 148.50 Mandatory Frame Packing,

5 1920*1080p 26.97 / 27.00 23.97 / 24.00 74.18 / 74.25 Mandatory Top & Bottom

6 1280*720p 44.96 / 45.00 59.94 / 60.00 74.18 / 74.25 Primary Side by Side (Half)

7 1920*1080i 67.432 / 67.50 59.94 / 60.00 148.35 / 148.50 Primary Frame Packing

8 1920*1080p 67.43 / 67.50 59.94 / 60.00 148.35 / 148.50 Primary Top & Bottom

9 1920*1080p 26.97 / 27.00 23.97 / 24.00 74.18 / 74.25 Primary Side by Side (Half)

10 1920*1080p 67.432 / 67.50 29.976 / 30.00 148.35 / 148.50 Primary Frame Packing,

11 1920*1080p 33.716 / 33.75 29.976 / 30.00 74.18 / 74.25 Primary Top & Bottom

12 1920*1080i 33.72 / 33.75 59.94 / 60.00 74.18 / 74.25 Secondary Top & Bottom

13 1920*1080p 67.43 / 67.50 59.94 / 60.00 148.35 / 148.50 Secondary Side by Side (Half)


15 720*480p 62.938 / 63.00 59.94 / 60.00 54.00 / 54.054 Secondary (16:9) Frame Packing,

16 720*480p 31.469 / 31.50 59.94 / 60.00 27.00 / 27.027 Secondary (16:9) Top & Bottom

17 720*480p 31.469 / 31.50 59.94 / 60.00 27.00 / 27.027 Secondary (16:9) Side by Side (Half)

5.2. 3D Mode5.2.1. RF Input

5.2.2. HDMI Input5.2.2.1. HDMI 1.3 - DTV (3D supported mode manually)

5.2.2.2. HDMI 1.3 - DTV (3D supported mode manually)



18 720*480p 62.938 / 63.00 59.94 / 60.00 54.00 / 54.054 Secondary (4:3) Frame Packing,

19 720*480p 31.469 / 31.50 59.94 / 60.00 27.00 / 27.027 Secondary (4:3) Top & Bottom

20 720*480p 31.469 / 31.50 59.94 / 60.00 27.00 / 27.027 Secondary (4:3) Side by Side (Half)

21 640*480p 62.938 / 63.00 59.94 / 60.00 50.35 / 50.40 Secondary Frame Packing,

22 640*480p 31.469 / 31.50 59.94 / 60.00 25.175 / 25.20 Secondary Top & Bottom


24 1280*720p 89.91 / 90.00 59.94 / 60.00 148.35 / 148.50 Line Alternative

25 1280*720p 44.96 / 45.00 59.94 / 60.00 148.35 / 148.50 Side by Side (Full)

26 1920*1080i 67.432 / 67.50 59.94 / 60.00 148.35 / 148.50 Field Alternative

27 1920*1080i 33.72 / 33.75 59.94 / 60.00 148.35 / 148.50 Side by Side (Full)





32 720*480p 62.938 / 63.00 59.94 / 60.00 54.00 / 54.054 16:9 Line Alternative

33 720*480p 31.469 / 31.50 59.94 / 60.00 54.00 / 54.054 16:9 Side by Side (Full)

34 720*480p 62.938 / 63.00 59.94 / 60.00 54.00 / 54.054 4:3 Line Alternative

35 720*480p 31.469 / 31.50 59.94 / 60.00 54.00 / 54.054 4:3 Side by Side (Full)



5.2.3. HDMI-PC Input (3D supported mode manually)No. Resolution H-freq(kHz) V-freq.(Hz) Pixel clock(MHz) Proposed Remark

1 1024*768 48.363 60.004 65.000 Side by Side, Top & Bottom

2 1360*768 47.712 60.015 85.500 Side by Side, Top & Bottom

3 1920*1080 67.50 60.00 148.50 Side by Side, Top & BottomCheckerboard, Single Frame SequentialRow Interleaving, Column Interleaving

5.2.4. USB Input5.2.4.1. USB Input (3D supported mode automatically)


1 1920*1080 33.75 30.000 74.25 HDTV 1080p Side by Side, Top & Bottom,Checkerboard, MPO (Photo)

5.2.4.2. USB Input (3D supported mode manually)


1 1920*1080 33.75 30.000 74.25 HDTV 1080p Side by Side, Top & BottomCheckerboard, Single Frame Sequential,Row Interleaving, Column Interleaving(Photo : Side by Side, Top & Bottom)


5.2.5. DLNA Input5.2.5.1. DLNA Input (3D supported mode automatically)


1 1920*1080 33.75 30.000 74.25 HDTV 1080p Side by Side, Top & Bottom,Checkerboard, MPO (Photo)

5.2.5.2. DLNA Input (3D supported mode manually)


1 1920*1080 33.75 30.000 74.25 HDTV 1080p Side by Side, Top & BottomCheckerboard, Single Frame Sequential,Row Interleaving, Column Interleaving(Photo : Side by Side, Top & Bottom)

5.2.6. Component InputNo. Resolution H-freq(kHz) V-freq.(Hz) Pixel clock(MHz) Proposed Remark

1 1280*720 44.96 59.94 74.176 HDTV 720P Side by Side, Top & Bottom

2 1920*1080 33.75 60.00 74.25 HDTV 1080I Side by Side, Top & Bottom

3 1920*1080 33.72 59.94 74.176 HDTV 1080I Side by Side, Top & Bottom

4 1920*1080 67.500 60 148.50 HDTV 1080P Side by Side, Top & Bottom






Remark: 3D Input mode

No Side by Side Top & Bottom Checkerboard Single Frame Sequential

Frame Packing Line Interleaving Column Inter-leaving

1 R L

R LLLLL

L

R L


ADJUSTMENT INSTRUCTION1. Application

This spec. sheet applies to EA34D Chassis applied LED TV all models manufactured in TV factory

2. Specification(1) Because this is not a hot chassis, it is not necessary to use

an isolation transformer. However, the use of isolation transformer will help protect test instrument.

(2) Adjustment must be done in the correct order.(3) The adjustment must be performed in the circumstance of

25 ±5 ºC of temperature and 65±10% of relative humidity if there is no specific designation

(4) The input voltage of the receiver must keep 100~240V, 50/60Hz

(5) The receiver must be operated for about 5 minutes prior to the adjustment when module is in the circumstance of over 15 ºC

In case of keeping module is in the circumstance of 0°C, it should be placed in the circumstance of above 15°C for 2 hours

In case of keeping module is in the circumstance of below -20°C, it should be placed in the circumstance of above 15°C for 3 hours.

※ CautionWhen still image is displayed for a period of 20 minutes or longer (especially where W/B scale is strong.Digital pattern 13ch and/or Cross hatch pattern 09ch), there can some afterimage in the black level area

3. Adjustment items3.1. Main PCBA Adjustments

(1) ADC adjustment: Component 480i, 1080p(2) EDID downloads for HDMI

※ Remark- Above adjustment items can be also performed in Final Assembly if needed. Adjustment items in both PCBA and final assembly tages can be checked by using the INSTART Menu -> 1.ADJUST CHECK

3.2. Final assembly adjustment(1) White Balance adjustment(2) RS-232C functionality check(3) Factory Option setting per destination(4) Shipment mode setting (In-Stop)(5) GND and HI-POT test

3.3. Appendix(1) Tool option menu, USB Download (S/W Update, Option and

Service only)(2) Manual adjustment for ADC calibration and White balance.(3) Shipment conditions, Channel pre-set

4. MAIN PCBA Adjustments4.1. ADC Calibration

- An ADC calibration is not necessary because MAIN SoC (LGExxxx) is already calibrated from IC Maker

- If it needs to adjust manually, refer to appendix.

4.2. MAC Address, ESN Key and Widevine Key download

4.2.1. Equipment & Condition1) Play file: keydownload.exe

4.2.2. Communication Port connection1) Key Write: Com 1,2,3,4 and 115200 (Baudrate)2) Barcode: Com 1,2,3,4 and 9600 (Baudrate)

4.2.3. Download process1) Select the download items.2) Mode check: Online Only3) Check the test process- US, Canada models: DETECT -> MAC_WRITE ->

WIDEVINE_WRITE- Korea, Mexico models: DETECT -> MAC_WRITE ->

WIDEVINE_WRITE4) Play : START5) Check of result: Ready, Test, OK or NG6) Printer out (MAC Address Label)

4.2.4. Communication Port connection1) Connect: PCBA Jig -> RS-232C Port == PC -> RS-232C

Port

4.2.5. Download1) US, Canada models (13Y LCD TV + MAC + Widevine +

ESN Key + DTCP Key + HDCP1.4 and HDCP2.0)

4.2.6. Inspection- In INSTART menu, check these keys.


4.3. LAN port Inspection (Ping Test)4.3.1. Equipment setting

1) Play the LAN Port Test PROGRAM.2) Input IP set up for an inspection to Test Program. - IP number: 12.12.2.2

4.3.2. LAN PORT inspection (PING TEST)1) Play the LAN Port Test Program.2) Connect each other LAN Port Jack.3) Play Test (F9) button and confirm OK Message.4) Remove LAN CABLE

4.4. EDID Download4.4.1 Overview

It is a VESA regulation. A PC or a MNT will display an optimal resolution through information sharing without any necessity of user input. It is a realization of “Plug and Play”.

4.4.2 Equipment Since embedded EDID data is used, EDID download JIG,

HDMI cable and D-sub cable are not need. Adjust remocon

4.4.3 Download method1) Press Adj. key on the Adj. R/C,2) Select EDID D/L menu.3) By pressing Enter key, EDID download will begin4) If Download is successful, OK is display, but If Download is

failure, NG is displayed.5) If Download is failure, Re-try downloads.

※ Caution) When EDID Download, must remove RGB/HDMI Cable.

4.4.4. EDID DATA(PCM)(1)DTS# HDMI 1(C/S : E8 36) EDID Block 0, Bytes 0-127 [00H-7FH]

0 1 2 3 4 5 6 7 8 9 A B C D E F --------------------------------------------------------------------------------- 0 | 00 FF FF FF FF FF FF 00 1E 6D 01 00 01 01 01 0110 | 01 17 01 03 80 A0 5A 78 0A EE 91 A3 54 4C 99 2620 | 0F 50 54 A1 08 00 31 40 45 40 61 40 71 40 81 8030 | 01 01 01 01 01 01 02 3A 80 18 71 38 2D 40 58 2C40 | 45 00 40 84 63 00 00 1E 66 21 50 B0 51 00 1B 3050 | 40 70 36 00 40 84 63 00 00 1E 00 00 00 FD 00 3A60 | 3E 1E 53 10 00 0A 20 20 20 20 20 20 00 00 00 FC70 | 00 4C 47 20 54 56 0A 20 20 20 20 20 20 20 01 E8

EDID Block 1, Bytes 128-255 [80H-FFH]

0 1 2 3 4 5 6 7 8 9 A B C D E F --------------------------------------------------------------------------------- 0 | 02 03 34 F1 48 90 22 20 05 04 03 02 01 29 3d 06 10 | C0 15 07 50 09 57 07 78 03 0C 00 10 00 B8 2D 20 20 | C0 0E 01 4F 00 FE 08 10 06 10 18 10 28 10 38 10 30 | E3 05 03 01 02 3A 80 18 71 38 2D 40 58 2C 45 00 40 | 40 84 63 00 00 1E 01 1D 80 18 71 1C 16 20 58 2C 50 | 25 00 40 84 63 00 00 9E 01 1D 00 72 51 D0 1E 20 60 | 6E 28 55 00 40 84 63 00 00 1E 00 00 00 00 00 00 70 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 36

# HDMI 2(C/S : E8 26)EDID Block 0, Bytes 0-127 [00H-7FH]



0 1 2 3 4 5 6 7 8 9 A B C D E F --------------------------------------------------------------------------------- 0 | 02 03 34 F1 48 90 22 20 05 04 03 02 01 29 3D 06 10 | C0 15 07 50 09 57 07 78 03 0C 00 20 00 B8 2D 20 20 | C0 0E 01 4F 00 FE 08 10 06 10 18 10 28 10 38 10 30 | E3 05 03 01 02 3A 80 18 71 38 2D 40 58 2C 45 00 40 | 40 84 63 00 00 1E 01 1D 80 18 71 1C 16 20 58 2C 50 | 25 00 40 84 63 00 00 9E 01 1D 00 72 51 D0 1E 20 60 | 6E 28 55 00 40 84 63 00 00 1E 00 00 00 00 00 00 70 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 26










(2)AC3# HDMI 1(C/S : E8 3F)EDID Block 0, Bytes 0-127 [00H-7FH]



0 1 2 3 4 5 6 7 8 9 A B C D E F --------------------------------------------------------------------------------- 0 | 02 03 31 f1 48 90 22 20 05 04 03 02 01 26 15 0710 | 50 09 57 07 78 03 0c 00 10 00 b8 2d 20 c0 0e 01 20 | 4f 00 fe 08 10 06 10 18 10 28 10 38 10 e3 05 0330 | 01 02 3a 80 18 71 38 2d 40 58 2c 45 00 40 84 6340 | 00 00 1e 01 1d 80 18 71 1c 16 20 58 2c 25 00 4050 | 84 63 00 00 9e 01 1d 00 72 51 d0 1e 20 6e 28 5560 | 00 40 84 63 00 00 1e 00 00 00 00 00 00 00 00 0070 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 3f

# HDMI 2(C/S : E8 2F)EDID Block 0, Bytes 0-127 [00H-7FH]













(3)PCM# HDMI 1(C/S : E8 B1)EDID Block 0, Bytes 0-127 [00H-7FH]



0 1 2 3 4 5 6 7 8 9 A B C D E F --------------------------------------------------------------------------------- 0 | 02 03 2e f1 48 90 22 20 05 04 03 02 01 23 09 5710 | 07 78 03 0c 00 10 00 b8 2d 20 c0 0e 01 4f 00 fe20 | 08 10 06 10 18 10 28 10 38 10 e3 05 03 01 02 3a30 | 80 18 71 38 2d 40 58 2c 45 00 40 84 63 00 00 1e40 | 01 1d 80 18 71 1c 16 20 58 2c 25 00 40 84 63 0050 | 00 9e 01 1d 00 72 51 d0 1e 20 6e 28 55 00 40 8460 | 63 00 00 1e 00 00 00 00 00 00 00 00 00 00 00 0070 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b1

# HDMI 2(C/S : E8 A1)EDID Block 0, Bytes 0-127 [00H-7FH]



0 1 2 3 4 5 6 7 8 9 A B C D E F --------------------------------------------------------------------------------- 0 | 02 03 2e f1 48 90 22 20 05 04 03 02 01 23 09 5710 | 07 78 03 0c 00 20 00 b8 2d 20 c0 0e 01 4f 00 fe20 | 08 10 06 10 18 10 28 10 38 10 e3 05 03 01 02 3a30 | 80 18 71 38 2d 40 58 2c 45 00 40 84 63 00 00 1e40 | 01 1d 80 18 71 1c 16 20 58 2c 25 00 40 84 63 0050 | 00 9e 01 1d 00 72 51 d0 1e 20 6e 28 55 00 40 8460 | 63 00 00 1e 00 00 00 00 00 00 00 00 00 00 00 0070 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 A1





0 1 2 3 4 5 6 7 8 9 A B C D E F --------------------------------------------------------------------------------- 0 | 02 03 2e f1 48 90 22 20 05 04 03 02 01 23 09 5710 | 07 78 03 0c 00 30 00 b8 2d 20 c0 0e 01 4f 00 fe20 | 08 10 06 10 18 10 28 10 38 10 e3 05 03 01 02 3a30 | 80 18 71 38 2d 40 58 2c 45 00 40 84 63 00 00 1e40 | 01 1d 80 18 71 1c 16 20 58 2c 25 00 40 84 63 0050 | 00 9e 01 1d 00 72 51 d0 1e 20 6e 28 55 00 40 8460 | 63 00 00 1e 00 00 00 00 00 00 00 00 00 00 00 0070 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 91




0 1 2 3 4 5 6 7 8 9 A B C D E F --------------------------------------------------------------------------------- 0 | 02 03 2e f1 48 90 22 20 05 04 03 02 01 23 09 5710 | 07 78 03 0c 00 40 00 b8 2d 20 c0 0e 01 4f 00 fe20 | 08 10 06 10 18 10 28 10 38 10 e3 05 03 01 02 3a30 | 80 18 71 38 2d 40 58 2c 45 00 40 84 63 00 00 1e40 | 01 1d 80 18 71 1c 16 20 58 2c 25 00 40 84 63 0050 | 00 9e 01 1d 00 72 51 d0 1e 20 6e 28 55 00 40 8460 | 63 00 00 1e 00 00 00 00 00 00 00 00 00 00 00 0070 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 81

5. Final Assembly Adjustment5.1. White Balance Adjustment5.1.1. Overview

5.1.1.1. W/B adj. Objective & How-it-works(1) Objective: To reduce each Panel’s W/B deviation(2) How-it-works: When R/G/B gain in the OSD is at 192, it

means the panel is at its Full Dynamic Range. In order to prevent saturation of Full Dynamic range and data, one of R/G/B is fixed at 192, and the other two is lowered to find the desired value.

(3) Adj. condition: normal temperature- Surrounding Temperature: 25±5 °C- Warm-up time: About 5 Min- Surrounding Humidity: 20% ~ 80%- Before White balance adjustment, Keep power on status,

don’t power off 5.1.1.2. Adj. condition and cautionary items(1) Lighting condition in surrounding area surrounding lighting

should be lower 10 lux. Try to isolate adj. area into dark surrounding.

(2) Probe location: Color Analyzer (CA-210) probe should be within 10cm and perpendicular of the module surface

(80°~ 100°)(3) Aging time- After Aging Start, Keep the Power ON status during 5 Minutes.

- In case of LCD, Back-light on should be checked using no signal or Full-white pattern.

5.1.2. Equipment(1) Color Analyzer: CA-210 (NCG: CH 9 / WCG: CH12 / LED:

CH14 / OLED : CH : 17)(2) Adj. Computer (During auto adj., RS-232C protocol is

needed)(3) Adjust Remocon(4) Video Signal Generator MSPG-925F 720p/204-Gray

(Model: 217, Pattern: 49) ※ Color Analyzer Matrix should be calibrated using CS-1000


5.1.3. Equipment connection

5.1.4. Adjustment Command (Protocol)(1) RS-232C Command used during auto-adj.

RS-232C COMMANDExplanation

CMD DATA ID

Wb 00 00 Begin White Balance adj.

Wb 00 ff End White Balance adj. (internal pattern disappears )

(2) Adjustment MapAdj. item Command

(lower caseASCII)Data Range(Hex.)

CMD1 CMD2 MIN MAX

Cool R Gain j g 00 C0

G Gain j h 00 C0

B Gain j i 00 C0

Medium R Gain j a 00 C0

G Gain j b 00 C0

B Gain j c 00 C0

Warm R Gain j d 00 C0

G Gain j e 00 C0

B Gain j f 00 C0

5.1.5. Adjustment method5.1.5.1. Auto WB calibration

(1) Set TV in ADJ mode using P-ONLY key (or POWER ON key)

(2) Place optical probe on the center of the display - It need to check probe condition of zero calibration before

adjustment.(3) Connect RS-232C Cable(4) Select mode in ADJ Program and begin a adjustment.(5) When WB adjustment is completed with OK message,

check adjustment status of pre-set mode (Cool, Medium, Warm)

(6) Remove probe and RS-232C cable. W/B Adj. must begin as start command “wb 00 00” , and

finish as end command “wb 00 ff”, and Adj. offset if need

5.1.5.2. OLED White balance table (1) Cool Mode - Purpose : Especially B-gain fix adjust leads to the

luminance enhancement. Adjust the color temperature to reduce the deviation of the module color temperature.

- Principle : To adjust the white balance without the saturation, Adjust the B gain more than 192 ( If R gain or G gain is more than 255 , G gain can adjust less than 192 ) and change the others ( R/G Gain ).

- Adjustment mode : mode – Cool

(2) Medium / Warm Mode - Purpose : Adjust the color temperature to reduce the

deviation of the module color temperature - Principle : To adjust the white balance without the

saturation, Fix the B gain to 192 (default data) and decrease the others

- Adjustment mode : mode – Medium

(3) Warm - Purpose : Adjust the color temperature to reduce the

deviation of the module color temperature. - Principle : To adjust the white balance without the

saturation, Fix the W gain to 192 (default data) and decrease the others.

- Adjustment mode : mode – Warm

(4) THX(Warm) - Purpose : Adjust the color temperature to reduce the

deviation of the module color temperature. - Principle : To adjust the white balance without the

saturation, Fix the W gain to 192 (default data) and decrease the others.

- Adjustment mode : mode – Warm - Auto White balance 4 point - Adjust 100 IRE White Balance - Adjust Gamam 2.2 each IRE (60, 40, 20). Using max

luminance - Complete 4 point gamma, W/B.

Picture is H 1/3, V 1/3 fixed Center Window size Outer Black Picture do not need change Contrast / Brightness Center Level can change Contrast / Bright Window pattern of Center 0~255 level


5.1.6. Reference (White Balance Adj. coordinate and color temperature)

(1) Luminance: 204 Gray, 80IRE(2) Standard color coordinate and temperature using CS-1000

(over 26 inch)

5.1.7. Reference (White Balance Adj. coordinate and color temperature)

Luminance: 204 Gray Standard color coordinate and temperature using CS-1000

(over 26 inch)

ModeCoordinate

Temp uvX Y

Cool 0.271 0.270 13,000K 0.0000

Medium 0.285 0.293 9,300K 0.0000

Warm 0.313 0.329 6,500K 0.0000

Standard color coordinate and temperature using CA-210(CH-14)

ModeCoordinate

Temp uvX Y

Cool 0.271±0.002 0.270±0.002 13,000K 0.0000

Medium 0.285±0.002 0.293±0.002 9,300K 0.0000

Warm 0.313±0.002 0.329±0.002 6,500K 0.0000

Standard color coordinate and temperature using CA-210(CH-14) – by aging time

5.2. Tool Option setting & Inspection per countries

5.2.1. Overview(1) Tool option selection is only done for models in Non-USA

North America due to rating(2) Applied model: EA34D Chassis applied to CANADA and

MEXICO

5.2.2. Country Group selection(1) Press ADJ key on the Adj. R/C, and then select Country

Group Menu(2) Depending on destination, select US, then on the lower

Country option, select US, CA, MX. Selection is done using +, - KEY

5.2.3. Tool Option inspection Press Adj. key on the Adj. R/C, then select Tool option

Model Tool 1 Tool 2 Tool 3 Tool 4 Tool 5 Tool 6 Tool 7

55EA9800-UA 32791 21777 5085 61837 55446 1432 47147

※ Tool option can be reconstructed by Software

5.3. Magic Motion remote controller Check 5.3.1. Test equipment

RF-remote controller for check, IR-KEY-CODE remote controller.

Check AA battery before test. A recommendation is that a tester change battery every lots.

5.3.2. Test(1) Make pairing with TV set by pressing “Start key(Wheel

key)” on RCU.(2) Check a cursor on screen by pressing ‘Wheel key” of RCU(3) Stop paring with TV set by pressing “Back+ Home” key of

RCU

5.3.3. Applied modelsChassis Model Name Magic RF receiver

EA34D 55EA8800-UA Built-in

55EA9800-UA

5.4. Wi-Fi MAC Address Check 5.4.1. Using RS232 Command

Command Set ACK

Transmission [A][l][][Set ID][][20][Cr] [O][K][x] or [N][G]

5.4.2. Check the menu on in-start


5.5. 3D pattern test (Only for 3D models) 5.5.1. Test equipment

(1) Pattern Generator MSHG-600 or MSPG-6100 (HDMI 1.4 support)

(2) Pattern: HDMI mode (model No. 872, pattern No. 83)

5.5.2. Test method(1) Input 3D test signal as Fig.1.

(2) Press ‘OK” key as a 3D input OSD is shown.(3) Check pattern as Fig2 without 3D glasses. (3D mode

without 3D glasses)

Fig.2<OK in 3D mode without 3D glasses>

Fig.3<NG in 3D mode without 3D glasses>

5.6. HDMI ARC Function Inspection 5.6.1. Test equipment

- Optic Receiver Speaker - MSHG-600 (SW: 1220 ↑) - HDMI Cable (for 1.4 version)

5.6.2. Test method(1) Insert the HDMI Cable to the HDMI ARC port from the

master equipment (HDMI1)

(2) Check the sound from the TV Set

(3) Check the Sound from the Speaker or using AV & Optic TEST program (It’s connected to MSHG-600)

* Remark: Inspect in Power Only Mode and check SW version in a master equipment


5.7. PIP/ W&R Function Inspection

(1) Objective : To check the connection between sub tuner and PCBA, and their Function

(2) Test Method : This Inspection is available only Power-Only Status.

1) Press exit key of the Adj. R/C and Press PIP key. 2) Check that the SUB TUNER pop up window on the TV

Set. 3) Check that the normal operation (picture, sound) of DTV

on the TV Set.

5.8. Ship-out mode check (In-stop) After final inspection, press In-Stop key of the Adj. R/C and check that the unit goes to Stand-by mode

6. AUDIO output check6.1. Audio input condition

(1) RF input: Mono, 1KHz sine wave signal, 100% Modulation(2) CVBS, Component: 1KHz sine wave signal (0.4Vrms)(3) RGB PC: 1KHz sine wave signal (0.7Vrms)

6.2. SpecificationNo Item Min Typ Max Unit Remark

1 Audio practical max Output, L/R(Distor-tion=10% max Output)

9.08.5

10.08.9

12.09.9

WVrms

(1) Measurement condition

- EQ/AVL/Clear Voice: Off

(2) Speaker (8Ω Impedance)

6.3. Audio Output Inspection(1) INPUT CHECK –S KEY OF ADJUST REMOTE

CONTROLLER TO INSPECT SPEAKER (2) When you click the first, the output volume of left & right

main speakers must be 50

(3) When you click the second, the output volume of left & right main speakers must be 80.

(4) When you click the third, the output volume of left & right main speakers must be 100.

(5) When you click the fourth, the output volume of left main speaker must be 50.

(6) When you click the fifth, the output volume of right main speaker must be 50.

(7) When you click the sixth, the output volume of left sub speaker must be 100.

(8) When you click the seventh, the output volume of right sub speaker must be 100.

(9) When you click the eighth, the output volume of all speakers (left & right main speaker and left & right sub speaker) must be 30.


7. Soft Touch Key Check- Before you start a test, you must run a ‘Power Only Mode’. AFTER Touch SOFT TOUCH KEY OF SET, LOCAL KEY CHECK DISPLAY WILL START

(1) Tab Test : Touch SOFT TOUCH KEY OF SET quickly

(2) Left Test : Touch SOFT TOUCH KEY OF SET to the left side.

(3) Right Test : Touch SOFT TOUCH KEY OF SET to the right side

(4) Long Tab Test : Touch SOFT TOUCH KEY OF SET long.

- Don’t need to run a test with this sequence. For example, the sequence such as ‘Right → Tab → Long Tab → Left’ is allowed.

8. EYE Q Green Inspection(1) Turn on TV(2) Press EYE key of Adj. R/C

(3) Cover the Eye Q sensor on the front of the using your hand and wait for 6 seconds

(4) Confirm that value is lower than 100 of the “Raw Data (Sensor data, Back light )” If after 6 seconds, value is not lower than 100, replace Eye Q sensor

(5) Remove your hand from the Eye Q sensor and wait for 6 seconds

(6) Confirm that “ok” pop up. If change is not seen, replace Eye Q sensor


9. GND and HI-POT Test9.1. GND & HI-POT auto-check preparation

(1) Check the POWER CABLE and SIGNAL CABE insertion condition

9.2. GND & HI-POT auto-check(1) Pallet moves in the station. (POWER CORD / AV CORD is

tightly inserted)(2) Connect the AV JACK Tester.(3) Controller (GWS103-4) on.(4) GND Test (Auto) - If Test is failed, Buzzer operates.- If Test is passed, execute next process (Hi-pot test). (Remove A/V CORD from A/V JACK BOX) (5) HI-POT test (Auto) - If Test is failed, Buzzer operates. - If Test is passed, GOOD Lamp on and move to next process

automatically.

9.3. Checkpoint(1) Test voltage- GND: 1.5KV/min at 100mA- SIGNAL: 3KV/min at 100mA(2) TEST time: 1 second(3) TEST POINT- GND Test = POWER CORD GND and SIGNAL CABLE GND.- Hi-pot Test = POWER CORD GND and LIVE & NEUTRAL.(4) LEAKAGE CURRENT: At 0.5mArms

10. USB S/W Download (optional, Service only)

(1) Put the USB Stick to the USB socket (2) Automatically detecting update file in USB Stick - If your downloaded program version in USB Stick is lower

than that of TV set, it didn’t work. Otherwise USB data is automatically detected.

(3) Show the message “Copying files from memory”

(4) Updating is staring

(5) Updating Completed, The TV will restart automatically

(6) If your TV is turned on, check your updated version and Tool option.

* If downloading version is more high than your TV have, TV can lost all channel data. In this case, you have to channel recover. If all channel data is cleared, you didn’t have a DTV/ATV test on production line.

* After downloading, TOOL OPTION setting is needed again.(1) Push "IN-START" key in service remote controller.(2) Select "Tool Option 1" and Push “OK” button.(3) Punch in the number. (Each model has their number.)


11. Optional adjustments11.1. Manual ADC Calibration11.1.1. Equipment & Condition

(1) Adjustment Remocon(2) 801GF (802B, 802F, 802R) or MSPG925FA Pattern

Generator - Resolution: 480i Comp1 (MSPG-925FA: model-209,

pattern-65) - Resolution: 1080p Comp1 (MSPG-925FA: model-225,

pattern-65) - Resolution : 1080p RGB (MSPG-925FA: model-225,

pattern-65) - Pattern : Horizontal 100% Color Bar Pattern - Pattern level: 0.7±0.1 Vp-p

11.1.2. Equipment & Condition11.1.2.1. ADC 480i/1080p Comp

(1) Check connected condition of Comp cable to the equipment

(2) Give a 480i Mode, Horizontal 100% Color Bar Pattern to Comp1. (MSPG-925FA → Model: 209, Pattern: 65)

(3) Change input mode as Component1 and picture mode as “Standard”

(4) Press the In-start Key on the ADJ remote after at least 1 min of signal reception. Then, select 7.External ADC. And Press OK or Right Button for going to sub menu.

(5) Press OK in Comp 480i menu(6) Give a 1080p Mode, Horizontal 100% Color Bar Pattern to

Comp1. (MSPG-925FA → Model: 225, Pattern: 65)(7) Press OK in Comp 1080p menu (8) If ADC Comp is successful, “ADC Component Success” is

displayed. If ADC calibration is failure, “ADC Component Fail” is displayed.

(10) If ADC calibration is failure, after rechecking ADC pattern or condition, retry calibration

(11) If ADC calibration is failure, after recheck ADC pattern or condition, retry calibration

11.2. Manual White balance Adjustment11.2.1. Adj. condition and cautionary items

(1) Lighting condition in surrounding area surrounding lighting should be lower 10 lux. Try to isolate adj. area into dark surrounding.

(2) Probe location: Color Analyzer (CA-210) probe should be within 10cm and perpendicular of the module surface

(80°~ 100°)(3) Aging time- After Aging Start, Keep the Power ON status during 5 Minutes.

- In case of LCD, Back-light on should be checked using no signal or Full-white pattern

11.2.2. Equipment(1) Color Analyzer: CA-210 (NCG: CH 9 / WCG: CH12 / LED:

CH14/ OLED : CH17)(2) Adj. Computer (During auto adj., RS-232C protocol is

needed)(3) Adjust Remocon(4) Video Signal Generator MSPG-925F 720p/216-Gray

(Model: 217, Pattern: 78)

11.2.3. Adjustment(1) Set TV in Adj. mode using POWER ON(2) Zero Calibrate the probe of Color Analyzer, then place it on

the center of LCD module within 10cm of the surface.(3) Press ADJ key → EZ adjust using adj. R/C → 6. White-

Balance then press the cursor to the right (KEY). When KEY() is pressed 216 Gray internal pattern will be

displayed.(4) One of R Gain / G Gain / B Gain should be fixed at 192,

and the rest will be lowered to meet the desired value.(5) Adj. is performed in COOL, MEDIUM, WARM 3 modes of

color temperature. If internal pattern is not available, use RF input. In EZ Adj.

menu 6.White Balance, you can select one of 2 Test-pattern: ON, OFF. Default is inner(ON). By selecting OFF, you can adjust using RF signal in 216 Gray pattern.


EXPLODED VIEW

Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in the Schematic Diagram and EXPLODED VIEW. It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent X-RADIATION, Shock, Fire, or other Hazards. Do not modify the original design without permission of manufacturer.

IMPORTANT SAFETY NOTICE

501

512

500

580

561

560

830

120

810

511

510

200

300

540

570

521 57

1

522

400

700

710

530

590

820

121

A22

A2

AT1

AG1

CAM1

Option

Option

Option

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATESSPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FORTHE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

EB_ADDR[13]

EMMC_DATA[5]

EB_ADDR[0]

EB_ADDR[14]

EB_ADDR[8]

EB_DATA[2]

EMMC_DATA[1]

EB_DATA[4]

EB_ADDR[11]

EB_DATA[3]

EB_DATA[5]

EB_ADDR[10]

EB_ADDR[12]

EMMC_DATA[7]

EB_ADDR[1]

EB_DATA[6]

EMMC_DATA[4]

EB_ADDR[6]

EB_ADDR[2]

EB_ADDR[4]

EB_DATA[0]

EMMC_DATA[0]

EMMC_DATA[6]

EMMC_DATA[3]

EB_ADDR[5]

EB_ADDR[3]

EB_ADDR[7]

EMMC_DATA[2]

EB_DATA[7]

EB_ADDR[9]

EB_DATA[1]

EMMC_RST

I2C_SCL_MICOM_SOC

R142

3.3K

TMS0

R174 33

X100

24MHz

4GND_2

1X-TAL_1

2GND_1

3X-TAL_2

TCK0

EMMC_CLK

WIFI_DM

RF_SWITCH_CTL

EPHY_EN

+3.3V_NORMAL

I2C_SDA_MICOM_SOC

TCK0

I2C_SCL1

/S2_RESET

HW_OPT_9

SMARTCARD_DATA/SD_EMMC_CLK

USB3_TX0M

UART2_RX

R155

10K

CI

EPHY_RXD1

EPHY_INT

I2C_SDA5

HDMI_S/W_RESET

PLLSET1

SMARTCARD_CLK/SD_EMMC_DATA[0]

+3.3V_NORMAL

HW_OPT_4

HDMI_CLK+

R159

2001%

/PCM_CE1

SOC_RESET

R169 3.3K

SW100JTP-1127WEM

DEBUG

12

4 3

HW_OPT_10

R125

10K

NON_DVB_T2_TUNER

R150

3.3K

OPT

+3.3V_NORMAL

R130

10K

NON_AJ_JA

XIN_MAIN

M_REMOTE_RTS

I2C_SDA1

R154

10K

CI

HW_OPT_1

R112

10K

INTERNAL_FRC

I2C_SCL6

R134 33

OPT

TDO0

R170 3.3K

HDMI_RX2-

+3.3V_NORMAL

+3.3V_NORMAL

I2C_SDA6

+3.3V_NORMAL

I2C_SDA5

PLLSET0

IRB_SPI_SS

TMS0

I2C_SDA4

INSTANT_BOOT

R118

3.3K

UART2_TX

+3.3V_NORMAL

R144

3.3K

IRB_SPI_CK

R148

3.3K

HDMI_RX0-

USB3_TX0P

+3.3V_NORMAL

I2C_SDA5

IRB_SPI_MOSI

SOC_TX

C105

0.1uF

UART2_TX

R101 33

OPT

R143

3.3K

OPM1

EB_ADDR[0-14]

R162

2001%

C101

10pF

CAM_INPACK_N

R123

10K

NON_CP_BOX

+3.3V_NORMAL

R122

10K

OPT

EMMC_DATA[0-7]

I2C_SDA4

R135-*11.5K

KR_PIP

M_REMOTE_RX

M_RFModule_RESET

+3.3V_TU

+3.3V_NORMAL

FE_LNA_Ctrl2

HW_OPT_7

PLLSET0

TRST_N0

SMARTCARD_VCC/SD_EMMC_CMD

HW_OPT_5

HP_DET

FRC_RESET

R120

10K

V13_MODULE

I2C_SCL5

PLLSET1

WIFI_DP

I2C_SCL5

SOC_RX

SPDIF_OUT_ARC

SMARTCARD_DET/SD_EMMC_DATA[3]

R137

3.3K

I2C_SCL4

EPHY_MDC

R135

3.3K

KR_PIP_NOT

BOOT_MODE

OPM0

R121

10K

I2C_SCL6

USB3_RX0P

R138

3.3K

CAM_REG_N

R151 33

FE_LNA_Ctrl1

XIN_MAIN

USB2_HUB_IC_IN_DM

CAM_WAIT_N

EPHY_TXD0

R146

3.3K

R117

3.3K

OPT

TDO0

USB3_RX0M

USB3_DP

R129

10K

AJ_JA

R157

2001%

R103

3.3K

DEBUG

I2C_SDA_MICOM_SOC

I2C_SCL4

R114

10K

FHD

/RST_PHY

HW_OPT_6

R116

10K

OLED

C100

10pF

USB3_DM

HDMI_RX1-

HDMI_RX2+

USB_DM2

R126

10K

DVB_T2_TUNER

HW_OPT_0

R139 33

/RST_HUB

+3.3V_NORMAL

TDI0

I2C_SCL1

R110

10K

TAIWAN

TRST_N0

C1030.1uF

I2C_SDA6

R140 33

R147

3.3K

VCOM_DYN

INSTANT_BOOT

R10633

HDMI_RX1+

CAM_CD2_N

CAM_CD1_N

R141

3.3K

R149 33

R165

3.3K

COMP1_DET

R109

10K

NON_TAIWAN

EB_DATA[0-7]

+3.3V_TU

R152 560

I2C_SCL2_SOC

R113

10K

UD

USB_CTL1

EMMC_CMD

+3.3V_NORMAL

EPHY_MDIO

SMARTCARD_PWR_SEL/SD_EMMC_DATA[1]

HW_OPT_2

R153

10K

CI

XO_MAIN

R136

3.3K

KR_PIP_NOT

R131

10K

EPI

SOC_RESET

HDMI_INT

CAM_IREQ_N

SMARTCARD_RST/SD_EMMC_DATA[2]

AMP_RESET_N

I2C_SDA1

USB2_HUB_IC_IN_DP

/TU_RESET1

BOOT_MODE

R133 33OPT

P101

12507WS-04L

DEBUG

1

2

3

4

5

R132

10K

NON_EPI

OPM1

H13A_SCL

R100 33OPT

UART2_RX

C104

0.1uF

HDMI_RX0+

OPM0

PMIC_RESET

USB_DP2

M_REMOTE_CTS

R128

10K

DVB_S_TUNER

R108

1M

I2C_SCL2_SOC

R119

10K

V12_MODULE

R145

3.3K

AV1_CVBS_DETR136-*11.5K

KR_PIP

R161

2001%

I2C_SDA2_SOC

R115

10K

NON_OLED

R127

10K

NON_DVB_S_TUNER

HW_OPT_8

M_REMOTE_TX

R164

33

1/16W

5%

TDI0

I2C_SCL_MICOM_SOC

PCM_5V_CTL

EPHY_RXD0

H13A_SDA

XO_MAIN

R124

10K

CP_BOX

HDMI_CLK-

R10533

CAM_SLIDE_DET

HW_OPT_3

IRB_SPI_MISO

/TU_RESET2

I2C_SCL5

EPHY_TXD1

PCM_RESET

/PCM_CE2

SC_DET

EPHY_REFCLK

R111

10K

NO_FRC

I2C_SDA2_SOC

EPHY_CRS_DV

/USB_OCD1

/USB_OCD2

EB_WE_N

USB_CTL2

USB_CTL3

EB_BE_N1

EB_OE_N

/USB_OCD3

EB_BE_N0

IR_B_RESET

IC102R1EX24256BSAS0A

EEPROM_RENESAS

3A2

2A1

4VSS

1A0

5SDA

6SCL

7WP

8VCC

IC102-*1M24256-BRMN6TP

EEPROM_ST

3E2

2E1

4VSS

1E0

5SDA

6SCL

7WC

8VCC

I2C_SCL_MICOM I2C_SCL_MICOM_SOC

I2C_SDA_MICOM_SOC

I2C_SDA2_SOC

I2C_SCL2_SOCR10433

R10233

I2C_SDA_MICOM

I2C_SCL2

I2C_SDA2

IC100LG1154D_H13D

XINA26

XOUTB26

XTAL_BYPASSB27

H13DA_XTALAT37

PORES_NAU16

OPM1AD34

OPM0AD33

H13DA_SCLAT26

H13DA_SDAAU26

TRST_N0AP9

TMS0AN9

TCK0AP11

TDI0AN11

TDO0AN10

TRST_N1AM10

TMS1AM9

TCK1AM11

TDI1AM12

TDO1AL11

PLLSET1AL9

PLLSET0AL10

BOOT_MODEAE34

EXT_INTR3/GPIO70Y33

EXT_INTR2/GPIO69W32

EXT_INTR1/GPIO68W33

EXT_INTR0/GPIO67W34

UART0_RXDAU12

UART0_TXDAT12

UART1_RXDAU13

UART1_TXDAT13

UART1_RTSAP12

UART1_CTSAR12

SPI_CS0/GPIO36AE35

SPI_DO0/GPIO38AE36

SPI_DI0/GPIO39AF36

SPI_SCLK0/GPIO37AF35

SPI_CS1AG34

SPI_DO1AF33

SPI_DI1AG33

SPI_SCLK1AG32

SCL0/GPIO66AR15

SDA0/GPIO65AP15

SCL1/GPIO64AR16

SDA1/GPIO79AP16

SCL2/GPIO78AP17

SDA2/GPIO77AR17

SCL3AP6

SDA3AR6

SCL4AH32

SDA4AJ33

SCL5AH34

SDA5AH33

CAM_CE1_N

F33

CAM_CE2_N

F34

CAM_CD1_N/GPIO76

D32

CAM_CD2_N/GPIO75

E32

CAM_VS1_N/GPIO86

G32

CAM_VS2_N/GPIO85

G33

CAM_IREQ_N/GPIO73

F32

CAM_RESET

G34

CAM_INPACK/GPIO74

D33

CAM_VCCEN_N/GPIO87

H32

CAM_WAIT_N/GPIO84

E33

CAM_REG_N/GPIO72

D34

CAM_IOIS16_N/GPIO83

H33

SC_CLK/GPIO130

T33

SC_DETECT/GPIO133

U33

SC_VCCEN/GPIO129

T32

SC_VCC_SEL/GPIO128

V32

SC_RST/GPIO131

V33

SC_DATA/GPIO132

V34

SD_CLK/GPIO125

A25

SD_CMD/GPIO124

C25

SD_CD_N/GPIO123

B25

SD_WP_N/GPIO122

E25

SD_DATA3/GPIO121

D25

SD_DATA2/GPIO120

E24

SD_DATA1/GPIO135

D24

SD_DATA0/GPIO134

C24

USB2_2_DP0

L37

USB2_2_DM0

L36

USB2_2_TXRTUNE

K34

USB2_1_DP0

M37

USB2_1_DM0

M36

USB2_1_TXRTUNE

K33

USB2_0_DP

AU7

USB2_0_DM

AT7

USB2_0_TXRTUNE

AP7

USB3_DP0

P37

USB3_DM0

P36

USB3_RX0P

N36

USB3_RX0M

N37

USB3_TX0P

R36

USB3_TX0M

R37

USB3_RESREF

N34

USB3_REFPADCLKM

P33

USB3_REFPADCLKP

P32

NC_1

L32

NC_2

L33

NC_3

M31

NC_4

AJ31

GPIO136

J32

GPIO137

J33

GPIO138

K32

GPIO139

J34

GPIO31AL34

GPIO30AM33

GPIO29AM32

GPIO28AF30

GPIO27AN34

GPIO26AK34

GPIO25AL33

GPIO24AL32

GPIO23/UART2_TXAR9

GPIO22/UART2_RXAM5

GPIO21AM6

GPIO20AM7

GPIO19AL6

GPIO18AK7

GPIO17AK6

GPIO16AK5

GPIO15AJ5

GPIO14AJ6

GPIO13AJ7

GPIO12AH6

GPIO11AG7

GPIO10AG6

GPIO9AG5

GPIO8AF5

GPIO7AH30

GPIO6AG30

GPIO5AN33

GPIO4AK33

GPIO3AE30

GPIO2AD30

GPIO1AN32

GPIO0AK32

DDCD0_CKAC32

DDCD0_DAAC33

HPD0AB33

PHY0_ARC_OUT_0AE37

PHY0_RX0N_0AC36

PHY0_RX0P_0AC37

PHY0_RX1N_0AB36

PHY0_RX1P_0AB37

PHY0_RX2N_0AA36

PHY0_RX2P_0AA37

PHY0_RXCN_0AD36

PHY0_RXCP_0AD37

HUB_PORT_OVER0R32

HUB_VBUS_CTRL0R33

EB_CS3/GPIO93

K35

EB_CS2/GPIO92

K36

EB_CS1/GPIO91

K37

EB_CS0/GPIO90

L35

EB_WE_N/GPIO95

H35

EB_BE_N1/GPIO81

H36

EB_WAIT/GPIO94

J35

EB_OE_N/GPIO82

J36

EB_BE_N0/GPIO80

H37

EB_ADDR15/GPIO89

G37

EB_ADDR14/GPIO88

G36

EB_ADDR13/GPIO103

G35

EB_ADDR12/GPIO102

F36

EB_ADDR11/GPIO101

F35

EB_ADDR10/GPIO100

E36

EB_ADDR9/GPIO99

E37

EB_ADDR8/GPIO98

E35

EB_ADDR7/GPIO97

D37

EB_ADDR6/GPIO96

D36

EB_ADDR5/GPIO111

D35

EB_ADDR4/GPIO110

C36

EB_ADDR3/GPIO109

C35

EB_ADDR2/GPIO108

B37

EB_ADDR1/GPIO107

B36

EB_ADDR0/GPIO106

B35

EB_DATA7/GPIO105

C32

EB_DATA6/GPIO104

B33

EB_DATA5/GPIO119

A33

EB_DATA4/GPIO118

C33

EB_DATA3/GPIO117

A34

EB_DATA2/GPIO116

B34

EB_DATA1/GPIO115

C34

EB_DATA0/GPIO114

A36

EMMC_CLK

Y37

EMMC_CMD

Y36

EMMC_RESETN

W35

EMMC_DATA7

T36

EMMC_DATA6

W36

EMMC_DATA5

V35

EMMC_DATA4

V37

EMMC_DATA3

V36

EMMC_DATA2

U35

EMMC_DATA1

U36

EMMC_DATA0

U37

RMII_REF_CLK

AU11

RMII_CRS_DV

AU8

RMII_MDIO

AT8

RMII_MDC

AR8

RMII_TXEN

AR10

RMII_TXD1

AT10

RMII_TXD0

AU10

RMII_RXD1

AT11

RMII_RXD0

AR11

TP102

TP103

TP104

TP105

TP106

TP101

TP108

TP109

TP100 IRB_SPI_SSTP107 IRB_SPI_MOSI

TP111

TP110

IRB_SPI_CK

IRB_SPI_MISO

IR_B_RESET

TP112

C10633pF50V

interface

local dimming

I2C port

BOOT MODE"0 : EMMC"1 : TEST MODE

OLED option

T2 support

AREA option1

NVRAM

Debugsatellite support

INSTANT_MODE0

EPI PANEL version

INSTANT boot MODE"1 : Instant boot"0 : normal

(internal pull down)

AREA option2

System Configuration

AC-coupling CAP

reserved

A0’h

Clock for LG1154D

Jtag I/F For Main

Place near by LG1154D

OP MODE[1:0]"00" : Normal Mode"01/10/11" : Internal Test mode

Write Protection

- Low : Normal Operation- High : Write Protection

BOOT_MODE0

I2C for tuner

PLL SET[1:0] : internal pull up"00" : CPU(1200Mhz),M0 / M1 DDR(792,792 Mhz)"01" : CPU(1056Mhz),M0 / M1 DDR(672,672 Mhz)"10" : CPU(1056Mhz),M0 / M1 DDR(792,792 Mhz)"11" : CPU( 960Mhz),M0 / M1 DDR(792,792 Mhz)

FRC option

System Clock for Analog block(24Mhz)

Model Option

MAIN Clock(24Mhz)

Pannel Resol

I2C PULL UP

CP BOX

EPI selection

For ISP

I2C for tuner

Only SMART CARD

Not Support

Panel

Area1

Not Support

No FRC(60Hz)

Disable

MODEL_OPT_5

MODEL_OPT_6

OLED

FRCMODEL_OPT_1

CP BOX

LOW

AJ_JA

NON OLED

Enable

MODEL_OPT_3

S Tuner

Support

Default

Area2

V12

HIGH

non Taiwan

MODEL_OPT_4

UD

MODEL_OPT_8

Module

Support

Reserved

OLED

MODEL_OPT_7

V13

FRC(120Hz)

MODEL_OPT_0

EPI

MODEL_OPT_2

Support

MODEL_OPT_10

MODEL_OPT_9

T2 Tuner

FHD

Not Support

Taiwan

BSD-NC4_H001-HD

2012-11-14

H13 D CHIP

non AJ_JA

Copyright 2013 LG Electronics. Inc. All right reserved.Only for training and service purposes LGE Internal Use Only


11/05/31

L222BLM18PG121SN1D

+1.1V_VDD

L225BLM15BD121SN1

4.7uF

C200

R202

1K1%

4.7uF

C241

L216BLM18PG121SN1D

VREF_M0_0

4.7uF

C239

R300

1K1%

C283

0.1uF

L228

BLM18PG121SN1D

4.7uF

C378

VDDC11_XTAL

VDDC15_M0

4.7uF

C201

C274

0.1uF

+3.3V_NORMAL

L238BLM18PG121SN1D

+1.1V_VDD

4.7uF

C211

+1.0V_VDD

+2.5V_Normal

L203BLM18PG121SN1D

VDD25_XTAL

C208

0.1uF

OPT

AVDD33

AVDD33

L201BLM18PG121SN1D

VDD25_LTX

VDD10_XTAL

+1.0V_VDD

AVDD25

C206

0.1uF

4.7uF

C214

C308

0.1uF

C344

0.1uF

OPT

VDD25_REF

AVDD33_XTAL

VDDC10

C204

0.1uF

4.7uF

C209

OPT

C251

0.1uF

+3.3V_NORMAL

VDD25_AUD

+2.5V_Normal

C218

0.1uF

L220BLM18PG121SN1D

+1.5V_DDR

VDDC15_M1

L207BLM18PG121SN1D

VDDC15_M0

22uF

C303

+1.5V_DDR

L211BLM18PG121SN1D

L226BLM15BD121SN1

+1.1V_VDD

+3.3V_NORMAL

R201

1K

1%

4.7uF

C270

C306

0.1uF

R303

1K

1%

4.7uF

C216

AVDD33_CVBS

C300

0.1uF

VDDC11_XTAL

R203

1K

1%

4.7uF

C279

L200BLM18PG121SN1D

L234BLM18PG121SN1D

VDD10_XTAL

VDDC15_M1

C381

0.1uF

VREF_M1_1

VDDC15_M0

C259

0.1uF

AVDD33_CVBS

4.7uF

C297

VDD25_LVDS

+2.5V_Normal

VREF_M1_0

+1.1V_VDD

AVDD33_XTAL

C223

0.1uF

AVDD25

4.7uF

C298

VREF_M0_1

VSS25_REF

4.7uF

C364

VDD25_LVDS

4.7uF

C202

R301

1K

1%

C301

0.1uF

VSS25_REF

C203

0.1uF

VREF_M0_0

C310

0.1uF

OPT

VREF_M1_0

C288

0.1uF

VDD10_XTAL

4.7uF

C242

+2.5V_Normal

4.7uF

C255

C207

0.1uF

OPT

22uF

C299

VDDC15_M1

4.7uF

C351

VDD25_XTAL

VDD25_XTAL

C307

0.1uF

C296

0.1uF

OPT

VREF_M0_1

VDDC15_M0

VDDC10

L227BLM18PG121SN1D

VDD25_LTX

4.7uF

C275

C302

0.1uF

VREF_M1_1

VDD25_LTX

VDD11_VTXPHY

R200

1K1%

L230

BLM18PG121SN1D

L209BLM18PG121SN1D

C246

0.1uF

VDD33

L206BLM18PG121SN1D

VDDC15_M1

R302

1K1%

+2.5V_Normal

VDD25_REF

+3.3V_NORMAL

4.7uF

C205

C304

0.1uF

OPT

VDD25_AUD

C368

0.1uF

VDD33

+1.1V_VDD

VDD11_VTXPHY

VDDC11_XTAL

JP202

JP204

JP205

JP203

MDS62110209

M200GASKET_8.0X6.0X8.5H

NON_LA8600

IC101LG1154AN_H13A

H13A_NON_BRAZIL

VDD33_1E11

VDD33_2F5

VDD33_3F6

VDD33_4F11

VDD33_5G5

VDD33_6H13

VDD33_7J13

VDD33_8P12

VDD33_9P13

VDD33_10R5

VDD33_11R6

VDD33_XTALN16

AVDD33_CVBS_1T13

AVDD33_CVBS_2T14

VDD25_CVBS_1N10

VDD25_CVBS_2N11

VDD25_VSB_1N12

VDD25_VSB_2N13

VDD25_REFU5

VDD25_COMP_1N7

VDD25_COMP_2N8

VDD25_COMP_3N9

VDD25_APLLF14

VDD25_AUD_1M6

VDD25_AUD_2N6

VDD25_AADM13

LTX_LVDD_1F15

LTX_LVDD_2F16

SDRAM_VDDQ_1H15

SDRAM_VDDQ_2J15

SDRAM_VDDQ_3J16

SDRAM_VDDQ_4K15

SDRAM_VDDQ_5K16

VDD10_XTALR18

VDDC10_1G7

VDDC10_2G8

VDDC10_3G9

VDDC10_4H7

VDDC10_5H12

VDDC10_6J7

VDDC10_7J12

VDDC10_8K7

VDDC10_9K12

VDDC10_10L7

VDDC10_11L12

VDDC10_12M7

VDDC10_13M12

AVDD10_CVBST17

AVDD10_VSBT18

AVDD10_LLPLLM8

DVDD10_APLL_1G10

DVDD10_APLL_2G11

LTX_VDDG12

VSS25_REFV5

GND_1C3

GND_2D3

GND_3D4

GND_4D17

GND_5E4

GND_6F4

GND_7F7

GND_8F8

GND_9F9

GND_10F10

GND_11F12

GND_12F13

GND_13F17

GND_14F18

GND_15G4

GND_16G6

GND_17G13

GND_18G14

GND_19G15

GND_20G16

GND_21G17

GND_22G18

GND_23H4

GND_24H5

GND_25H6

GND_26H8

GND_27H9

GND_28H10

GND_29H11

GND_30H14

GND_31J4

GND_32J5

GND_33J6

GND_34J8

GND_35J9

GND_36J10

GND_37J11

GND_38J14

GND_39K4

GND_40K5

GND_41K6

GND_42K8

GND_43K9

GND_44K10

GND_45K11

GND_46K13

GND_47K14

GND_48L1

GND_49L2

GND_50L3

GND_51L4

GND_52L5

GND_53L6

GND_54L8

GND_55L9

GND_56L10

GND_57L11

GND_58L13

GND_59L14

GND_60L15

GND_61L16

GND_62L17

GND_63L18

GND_64M1

GND_65M2

GND_66M3

GND_67M4

GND_68M5

GND_69M9

GND_70M10

GND_71M11

GND_72M14

GND_73M15

GND_74M16

GND_75N4

GND_76N5

GND_77N14

GND_78N15

GND_79N17

GND_80P4

GND_81P5

GND_82P6

GND_83P7

GND_84P8

GND_85P9

GND_86P10

GND_87P11

GND_88P14

GND_89P15

GND_90P16

GND_91R4

GND_92R7

GND_93R8

GND_94R9

GND_95R10

GND_96R11

GND_97R12

GND_98R13

GND_99R14

GND_100R15

GND_101R16

GND_102R17

GND_103T4

GND_104T7

GND_105T8

GND_106T9

GND_107T10

GND_108T11

GND_109T12

GND_110T15

GND_111T16

GND_112U4

GND_113U6

GND_114U18

GND_115V4

GND_116V16

IC100LG1154D_H13D

M0_DDR_VREF1A24

M0_DDR_VREF2A4

M1_DDR_VREF1A2

M1_DDR_VREF2Y1

XTAL_VDDP26

XTAL_VDDPN26

VDD33_1M21

VDD33_2Y30

VDD33_3AA30

VDD33_4AE8

VDD33_5AF8

VDD33_6AK13

VDD33_7AK24

VDD33_8AK25

AVDD33_USB_1M22

AVDD33_USB_2M23

AVDD33_BT_USB_1AK11

AVDD33_BT_USB_2AK12

AVDD33_HDMI_1AF25

AVDD33_HDMI_2AF26

SP_VQPSR31

VDD25_LVRX_1AE23

VDD25_LVRX_2AF23

VTXPHY_VDD25_1AE14

VTXPHY_VDD25_2AF14

VDD25_DR3PLLN25

GPLL_AVDD25AD26

VDD15_M0_1H10

VDD15_M0_2H11

VDD15_M0_3H12

VDD15_M0_4H13

VDD15_M0_5H14

VDD15_M0_6H15

VDD15_M0_7H16

VDD15_M0_8H17

VDD15_M0_9H18

VDD15_M0_10H19

VDD15_M0_11H20

VDD15_M0_12H21

VDD15_M0_13H22

VDD15_M0_14H23

VDD15_M0_15H24

VDD15_M0_16H25

VDD15_M1_1H7

VDD15_M1_2H8

VDD15_M1_3J8

VDD15_M1_4K8

VDD15_M1_5L7

VDD15_M1_6L8

VDD15_M1_7M8

VDD15_M1_8N7

VDD15_M1_9N8

VDD15_M1_10P8

VDD15_M1_11R7

VDD15_M1_12R8

VDD15_M1_13T8

VDD15_M1_14U8

VDD15_M1_15V8

VDD15_M1_16W8

VDDC11_1N21

VDDC11_2N22

VDDC11_3N23

VDDC11_4P15

VDDC11_5P16

VDDC11_6P17

VDDC11_7P18

VDDC11_8R15

VDDC11_9T15

VDDC11_10T22

VDDC11_11T23

VDDC11_12T24

VDDC11_13U15

VDDC11_14U22

VDDC11_15U23

VDDC11_16U24

VDDC11_17V15

VDDC11_18V22

VDDC11_19V23

VDDC11_20V24

VDDC11_21W22

VDDC11_22W23

VDDC11_23W24

VDDC11_24AB15

VDDC11_25AB24

VDDC11_26AC15

VDDC11_27AC24

VDDC11_28AD15

VDDC11_29AD16

VDDC11_30AD17

VDDC11_31AD18

VDDC11_32AD21

VDDC11_33AD22

VDDC11_34AD23

VDDC11_35AD24

VTXPHY_VDD11_1AB14

VTXPHY_VDD11_2AC14

VTXPHY_VDD11_3AD14

AVDD11_DR3PLLP25

AVDD11_DCOAA15

GPLL_VDD11AC26

IC100LG1154D_H13D

GND_1A27

GND_2B5

GND_3C5

GND_4C26

GND_5C27

GND_6D5

GND_7D26

GND_8E5

GND_9E6

GND_10E7

GND_11E8

GND_12E22

GND_13E23

GND_14E26

GND_15F7

GND_16F8

GND_17F22

GND_18F23

GND_19F24

GND_20F25

GND_21F26

GND_22F27

GND_23F31

GND_24G7

GND_25G8

GND_26G9

GND_27G10

GND_28G11

GND_29G12

GND_30G13

GND_31G14

GND_32G15

GND_33G16

GND_34G17

GND_35G18

GND_36G19

GND_37G20

GND_38G21

GND_39G22

GND_40G23

GND_41G24

GND_42G25

GND_43G26

GND_44G27

GND_45G28

GND_46G29

GND_47G30

GND_48G31

GND_49H9

GND_50H26

GND_51H27

GND_52H28

GND_53H29

GND_54H30

GND_55H31

GND_56J7

GND_57J30

GND_58J31

GND_59K7

GND_60K30

GND_61K31

GND_62L30

GND_63L31

GND_64M7

GND_65M12

GND_66M13

GND_67M14

GND_68M15

GND_69M16

GND_70M17

GND_71M18

GND_72M19

GND_73M20

GND_74M24

GND_75M25

GND_76M26

GND_77M30

GND_78M32

GND_79M33

GND_80M34

GND_81N12

GND_82N13

GND_83N14

GND_84N15

GND_85N16

GND_86N17

GND_87N18

GND_88N19

GND_89N20

GND_90N24

GND_91N30

GND_92N31

GND_93N32

GND_94N33

GND_95P7

GND_96P12

GND_97P13

GND_98P14

GND_99P19

GND_100P20

GND_101P21

GND_102P22

GND_103P23

GND_104P24

GND_105P30

GND_106P31

GND_107R12

GND_108R13

GND_109R14

GND_110R16

GND_111R17

GND_112R18

GND_113R19

GND_114R20

GND_115R21

GND_116R22

GND_117R23

GND_118R24

GND_119R25

GND_120R26

GND_121R30

GND_122R34

GND_123T7

GND_124T12

GND_125T13

GND_126T14

GND_127T16

GND_128T17

GND_129T18

GND_130T19

GND_131T20

GND_132T21

GND_133T25

GND_134T26

GND_135T30

GND_136T31

GND_137T34

GND_138U7

GND_139U12

GND_140U13

GND_141U14

GND_142U16

GND_143U17

GND_144U18

GND_145U19

GND_146U20

GND_147U21

GND_148U25

GND_149U26

GND_150U30

GND_151U31

GND_152V7

GND_153V12

GND_154V13

GND_155V14

GND_156V16

GND_157V17

GND_158V18

GND_159V19

GND_160V20

GND_161V21

GND_162V25

GND_163V26

GND_164V30

GND_165V31

GND_166W5

GND_167W6

GND_168W7

GND_169W12

GND_170W13

GND_171W14

GND_172W15

GND_173W16

GND_174W17

GND_175W18

GND_176W19

GND_177W20

GND_178W21

GND_179W25

GND_180W26

GND_181W30

GND_182W31

GND_183Y3

GND_184Y4

GND_185Y5

GND_186Y8

GND_187Y12

GND_188Y13

GND_189Y14

GND_190Y15

GND_191Y16

GND_192Y17

GND_193Y18

GND_194Y19

GND_195Y20

GND_196Y21

GND_197Y22

GND_198Y23

GND_199Y24

GND_200Y25

GND_201Y26

GND_202Y31

GND_203Y35

GND_204AA8

GND_205AA12

GND_206AA13

GND_207AA14

GND_208AA16

GND_209AA17

GND_210AA18

GND_211AA19

GND_212AA20

GND_213AA21

GND_214AA22

GND_215AA23

GND_216AA24

GND_217AA25

GND_218AA26

GND_219AA31

GND_220AB6

GND_221AB8

GND_222AB12

GND_223AB13

GND_224AB16

GND_225AB17

GND_226AB18

GND_227AB19

GND_228AB20

GND_229AB21

GND_230AB22

GND_231AB23

GND_232AB25

GND_233AB26

GND_234AB30

GND_235AB31

GND_236AC8

GND_237AC12

GND_238AC13

GND_239AC16

GND_240AC17

GND_241AC18

GND_242AC19

GND_243AC20

GND_244AC21

GND_245AC22

GND_246AC23

GND_247AC25

GND_248AC30

GND_249AC31

GND_250AD8

GND_251AD12

GND_252AD13

GND_253AD19

GND_254AD20

GND_255AD25

GND_256AD31

GND_257AE12

GND_258AE13

GND_259AE15

GND_260AE16

GND_261AE17

GND_262AE18

GND_263AE19

GND_264AE20

GND_265AE21

GND_266AE22

GND_267AE24

GND_268AE25

GND_269AE26

GND_270AE31

GND_271AF12

GND_272AF13

GND_273AF15

GND_274AF16

GND_275AF17

GND_276AF18

GND_277AF19

GND_278AF20

GND_279AF21

GND_280AF22

GND_281AF24

GND_282AF31

GND_283AG8

GND_284AG31

GND_285AH8

GND_286AH31

GND_287AJ8

GND_288AJ30

GND_289AK8

GND_290AK9

GND_291AK10

GND_292AK14

GND_293AK15

GND_294AK16

GND_295AK17

GND_296AK18

GND_297AK19

GND_298AK20

GND_299AK21

GND_300AK22

GND_301AK23

GND_302AK26

GND_303AK27

GND_304AK28

GND_305AK29

GND_306AK30

GND_307AK31

GND_308AL8

GND_309AL12

GND_310AL13

GND_311AL14

GND_312AL15

GND_313AL16

GND_314AL17

GND_315AL18

GND_316AL19

GND_317AL20

GND_318AL21

GND_319AL22

GND_320AL23

GND_321AL24

GND_322AL25

GND_323AL26

GND_324AL27

GND_325AL28

GND_326AL29

GND_327AL30

GND_328AL31

GND_329AM8

GND_330AM13

GND_331AM14

GND_332AM15

GND_333AM16

GND_334AM17

GND_335AM18

GND_336AM19

GND_337AM20

GND_338AM21

GND_339AM22

GND_340AM23

GND_341AM24

GND_342AM25

GND_343AM26

GND_344AM27

GND_345AM28

GND_346AM29

GND_347AM30

GND_348AM31

GND_349AN6

GND_350AN12

GND_351AN13

GND_352AN15

GND_353AN16

GND_354AN17

GND_355AN18

GND_356AN19

GND_357AN20

GND_358AN21

GND_359AN22

GND_360AN23

GND_361AN24

GND_362AN25

GND_363AN26

GND_364AN27

GND_365AN28

GND_366AN29

GND_367AN30

GND_368AN31

IC101-*1LG1154AN_H13A_ISDB-T (LG1154AN-IT)

H13A_BRAZIL

XIN_SUBP17

XO_SUBP18

VSB_AUX_XINJ17

XTAL_BYPASSN18

CLK_24MD18

XTAL_SEL0M18

XTAL_SEL1M17

PORES_NE3

OPM0K3

OPM1K2

H13A_SCLA8

H13A_SDAB8

CVBS_IN3U13

CVBS_IN2V14

CVBS_IN1V15

CVBS_VCMV13

BUF_OUT1U15

BUF_OUT2U14

REFTU7

REFBV6

ADC1_COMV7

ADC2_COMU10

ADC3_COMV12

SC1_SIDT5

SC1_FBT6

PB1_INU8

Y1_INV8

SOY1_INV9

PR1_INU9

PB2_INV10

Y2_INU11

SOY2_INV11

PR2_INU12

AAD_ADC_SIFH18

AAD_ADC_SIFMH17

AUDA_VBG_EXTP2

AUDA_OUTLN1

AUDA_OUTRN2

AUD_SCART_OUTLN3

AUD_SCART_OUTRP1

AUAD_L_CH4_INP3

AUAD_R_CH4_INR1

AUAD_L_CH3_INR2

AUAD_R_CH3_INT1

AUAD_L_CH2_INU2

AUAD_R_CH2_INU3

AUAD_L_CH1_INV2

AUAD_R_CH1_INV3

AUAD_R_REFU1

AUAD_M_REFT3

AUAD_L_REFT2

AUAD_REF_POR3

ANTCONK17

RFAGCK18

IFAGCJ18

ADC_I_INCOMU16

ADC_I_INPU17

ADC_I_INNV17

GPIO0F3

GPIO1F2

GPIO2F1

GPIO3G3

GPIO4G2

GPIO5G1

GPIO6H3

GPIO7H2

GPIO8H1

GPIO9J3

GPIO10E18

GPIO11E17

GPIO12H16

GPIO13J2

GPIO14J1

GPIO15K1

MAIN POWER

+2.5V_Bypass Cap

+1.0V_Bypass Cap

1005 size beadBottom side of chip

+3.3V

+1.5V

LG1154A

(1)

(2)

AFE 3CH Power

+2.5V

+3.3V_Bypass Cap

+3.3V_Bypass Cap

+1.5V_Bypass Cap

(1)

(4)

LG1154A

+1.1V_Bypass Cap(2)

+0.75V

+2.5V_Bypass Cap

+1.1V

LG1154D

BSD-NC4_H002-HD

2012-12-24

GND JIG POINT SMD TOP for EMI



TPO_DATA[0]

TPO_DATA[2]

TPO_DATA[3]

FE_DEMOD1_TS_DATA[1]

TPO_DATA[7]






TPI_DATA[0]


TPI_DATA[7]

TPI_DATA[1]

TPI_DATA[5]

TPO_DATA[6]

TPI_DATA[3]

TPO_DATA[5]

TPI_DATA[6]

TPO_DATA[1]

TPI_DATA[4]

TPI_DATA[2]


TPO_DATA[4]

TPO_DATA[0-7]

AUAD_R_REF

R434100

R404

100K

EU

AUAD_R_CH3_IN

R408

100K

EU

D406

5.5V

D401

5.5V

TXB0P/TX5P

TXA0P/TX11P

R432100

C402150pF50VOPT

COMP1_Y_IN_SOC_SOY

DTV/MNT_V_OUT_SOC

HW_OPT_2

SC_B

AUAD_REF_PO

COMP2_Y_IN_SOC_SOY

H13A_SDA

C423 0.047uF

C4000.01uF

COMP2_Y_IN_SOC

TPO_ERR

TPO_SOP

R49433

SCART_Lout

R422

75

SCART_FB_DIRECT

TXC1N

TPO_ERR

R440 10K 1%

C405150pF50V

D403

5.5V

C454 0.1uF

H13A_SCL

FE_DEMOD2_TS_CLK

R453 330

R409

100K

EU

COMP2_PR_IN_SOC

R419 27K1%

SCART_AMP_L_FB

R43133

COMP2_PB_IN_SOC

AUD_SCK

GST_SOC

SCART_Rout_SOC

R454

2 1/10W

5%OPT

BPL_IN

R42733

XOUT_SUB

X400

24MHz

4GND_2

1X-TAL_1

2GND_1

3X-TAL_2

R445

22K

C403

2.2uF10V

EU

C4471uF25V

OPT

AV1_CVBS_IN

+3.3V_NORMAL

R481

10K

OPT

SC_CVBS_IN

C420 0.047uF

COMP1/AV1/DVI_L_IN

C424 0.047uF

R439 10K 1%

ADC_I_INP

TXB4N/TX0N

SC_FB

TXA2N/TX9N

SC_R

TPI_DATA[0-7]

TU_CVBS

OPM[1]

C60061uF25V

EU

C429 1000pF

PWM_DIM2

TPI_CLK

FE_DEMOD1_TS_DATA[0-7]

SC_CVBS_IN_SOY

R42933

R416

75

1% EU

TXBCLKN/TX2N

C406

2.2uF10V

EU

COMP1_PR_IN_SOC

TXA1N/TX10N

R447 68

R448 68

C425 0.047uF

COMP1_Y_IN_SOC_SOY

R42533

C458

0.01uF

EU

SC_CVBS_IN_SOY

EO_SOC

FE_DEMOD2_TS_ERROR

COMP2_PR_IN_SOC

L408 1uH

HW_OPT_7

TP400

COMP1_Y_IN_SOC

TXACLKP/TX8P

R43510K EU

C435 4.7uF

HW_OPT_8

AUAD_M_REF

DPM

TXB0N/TX5N

R438 10K 1%

XTAL_SEL[0]

+12V

COMP1_PR_IN_SOC

FE_DEMOD1_TS_SYNC

FE_DEMOD1_TS_CLK

TPI_SOP

XTAL_SEL[0]

R498 100

C460

0.01uF

EU

XTAL_SEL[1]

AUAD_R_CH2_IN

TXB3N/TX1N

HW_OPT_4

DPM

TXB1N/TX4N

C442 0.047uF

R490 100

R450 68

R49333

COMP2_Y_IN_SOC_SOY

AUAD_L_CH2_IN

TXCCLKP

R482

10K

OPT

R430

22K

TXA3N/TX7N

TXA3P/TX7P

AUAD_R_REF

HW_OPT_10

FE_DEMOD3_TS_CLK

C426

10pF

TUNER_SIFC450 0.1uF

R480100EU

R426

22K

EU

C4460.1uF

C441 0.047uF

SCART_Lout_SOC

C451 0.1uF

TXACLKN/TX8N

SCART_Rout

R420 27K1%

HW_OPT_6

GCLK_SOC

TXC4P

+2.5V_Normal

FE_DEMOD1_TS_VAL

FE_DEMOD3_TS_ERROR

TPO_CLK

C419 0.047uF

R411751%

EU

C470

10pF

50V

TXB2N/TX3N

SC_FB_SOC

OPM[0]

SC_G

COMP1_PB_IN_SOC

R4362.7K

EU

C408150pF50VEU

HW_OPT_0

PWM1

COMP1/AV1/DVI_R_IN

C60011uF 25V

EU

PWM2

FE_DEMOD2_TS_DATA

HW_OPT_9

OPM[0]

C427

10pF

C432 4.7uF

R417

75

1%

TXC1P

R483

10K

OPT

R462100

FRC_FLASH_WP

R418 27K1%

HW_OPT_3

R487

0

NON_TU_W_BR/TW/CO

FE_DEMOD3_TS_DATA

SC_ID_SOC

R437 10K 1%

C440 0.047uF

AUDA_OUTR

REFB

XIN_SUBFE_DEMOD3_TS_VAL

SC_R_IN

AUD_LRCK

TXA1P/TX10P

C421 0.047uF

TXB1P/TX4P

C443 0.047uF

PWM_DIM

COMP2_PB_IN_SOC

HW_OPT_1

COMP1_Y

AUAD_R_CH3_IN

AUAD_L_REF

C473

10pF

50V

OPT

R495 100

C422 0.047uF

C456

4.7uF10V

AUD_LRCHC439100pF50V

OPT

SPDIF_OUT

AV1_CVBS_IN_SOC

C430

10pF

50V

TXCCLKN

R442

22K

EU

C417 0.047uF

C431

10pF

50V

HP_LOUT_MAIN

SC_L_IN

XOUT_SUB

TXC2N

HP_ROUT_MAIN

TXC2P

C410150pF

AV1_CVBS_IN_SOC

R42433

SC_CVBS_IN_SOC

C474

10pF

50V

OPT

R42833

XTAL_SEL[1]

C472

10pF

50V

OPT

R403

100K

EU

TPI_ERR

MCLK_SOC

XIN_SUB

C448

4.7uF10V

OPT

AUAD_REF_PO

L409

EU

1uH

REFT

C453 2.2uF

R412

75

1%

EU

TU_CVBS_SOC

R45551K

1%

COMP2_Y_IN_SOC

R433100

AUAD_R_CH2_IN

TXC0P

R496 100

TXA2P/TX9PC449

4.7uF

AUAD_L_REF

R436-*10

NON_EU

R484

10K

OPT

OPM[1]

HW_OPT_5

C445

0.1uF

TXB2P/TX3P

TXC4N

R600510K

EU

C462150pFEU

SCART_Rout_SOC

R460100

FE_DEMOD2_TS_SYNC

R422-*1 0NON_EU

TPI_ERR

R449 68

C4010.01uF

COMP1_Pb

AUAD_M_REF

TXC3P

COMP1_Pr+3.3V_NORMAL

R441

1M

TXB3P/TX1P

PWM2

REFT

SC_FB_SOC

C428 1000pF

R461100

R459100

AUDA_OUTL

TXC3N

COMP1_Y_IN_SOC

D4045.5V

SCART_AMP_R_FB

R421 27K1%

R423 100SCART_FB_DIRECT

R410751%

10uFC452

AUAD_L_CH2_IN

C4590.1uF

TU_W_BR/TW/CO

SC_ID

FE_DEMOD1_TS_ERROR

R479100EU

AUAD_L_CH3_IN

R45751K

1%

AUDA_OUTL

TXA4N/TX6N

AUAD_L_CH3_IN

L/DIM0_MOSI

TXB4P/TX0P

TPI_VAL

R415

75

1%

REFB

TPO_VAL

C433 4.7uF

FE_DEMOD3_TS_SYNC

R6450100

SC_CVBS_IN_SOC

SC_ID_SOC

SCART_Lout_SOC

C418 0.047uF

R6006

10K

EU

SOC_RESET

L/DIM0_VS

AUD_MASTER_CLK

10uF

C455

L407

R497 100ADC_I_INN

FE_DEMOD2_TS_VAL

R6451100

R489 100

TXA4P/TX6P

C444

0.1uF

PWM1

TU_CVBS_SOC

COMP1_PB_IN_SOC

TXC0N

R413

75

1%

TXBCLKP/TX2P

TP402

AUDA_OUTR

IF_AGC

L/DIM0_SCLK

R414

75

1%

EU

C4571000pFOPT

TXA0N/TX11N

C434 4.7uF

R407 330

R492 330

CLK_54M_VTT

DAC_START_PULLDOWN

R466

82

1/16W

1%

+3.3V_NORMAL

DAC_START_PULLDOWN

CLK_54M_VTT

R464

1K

1/16W

1%

R465

390

1/16W

1%

R467 82

1/16W 1%

TXB0P

TXB0N

TXB1N

TXB1P

TXACLKN

TXA4N

TXA4P

TXACLKP

TXB2N

TXA1P

TXA1N

TXB2P

L401BLM18PG121SN1D

HP_OUT

HP_ROUT

C43622pF

NON_TU_W_BR/TW

L400BLM18PG121SN1D

HP_OUT

IF_P

HP_LOUT_AMP

IF_N

C4070.22uF10V

HP_OUT

L406OPT

ADC_I_INP

R443

51

NON_TU_BR/TW

HP_LOUT

C437

0.01uF

HP_ROUT_AMP

C438

0.01uF

R444

51

NON_TU_BR/TW

ADC_I_INN

C4090.22uF10V

HP_OUT

C41110pF50VOPT

R402 33

R405 33

R400 33

4.7uF

C413

EU

IC400MM1756DURE

EU

3BIAS

2GND

4OUT

1IN

6VCC

5PS

DTV/MNT_V_OUT_SOC

C414

0.1uF

EU

+3.3V_NORMAL

C4120.1uF

EU

DTV/MNT_V_OUT

Q400MMBT3904(NXP)

SCART_FB_BUFFERE

B

C

R446

4.7K

SCART_FB_BUFFER

SC_FB_BUF

R406

1K

1/16W

1%

SCART_FB_BUFFER

SC_FB

+3.3V_NORMAL

SC_FB_BUF

C4040.01uF50V

EPI_LOCK6

R401470

1/16W5%

SCART_FB_BUFFER

R456

47K

1%

R45847K

1%

IC101LG1154AN_H13A

H13A_NON_BRAZIL

XIN_SUBP17

XO_SUBP18

VSB_AUX_XINJ17

XTAL_BYPASSN18

CLK_24MD18

XTAL_SEL0M18

XTAL_SEL1M17

PORES_NE3

OPM0K3

OPM1K2

H13A_SCLA8

H13A_SDAB8

CVBS_IN3U13

CVBS_IN2V14

CVBS_IN1V15

CVBS_VCMV13

BUF_OUT1U15

BUF_OUT2U14

REFTU7

REFBV6

ADC1_COMV7

ADC2_COMU10

ADC3_COMV12

SC1_SIDT5

SC1_FBT6

PB1_INU8

Y1_INV8

SOY1_INV9

PR1_INU9

PB2_INV10

Y2_INU11

SOY2_INV11

PR2_INU12

AAD_ADC_SIFH18

AAD_ADC_SIFMH17

AUDA_VBG_EXTP2

AUDA_OUTLN1

AUDA_OUTRN2

AUD_SCART_OUTLN3

AUD_SCART_OUTRP1

AUAD_L_CH4_INP3

AUAD_R_CH4_INR1

AUAD_L_CH3_INR2

AUAD_R_CH3_INT1

AUAD_L_CH2_INU2

AUAD_R_CH2_INU3

AUAD_L_CH1_INV2

AUAD_R_CH1_INV3

AUAD_R_REFU1

AUAD_M_REFT3

AUAD_L_REFT2

AUAD_REF_POR3

ANTCONK17

RFAGCK18

IFAGCJ18

ADC_I_INCOMU16

ADC_I_INPU17

ADC_I_INNV17

GPIO0F3

GPIO1F2

GPIO2F1

GPIO3G3

GPIO4G2

GPIO5G1

GPIO6H3

GPIO7H2

GPIO8H1

GPIO9J3

GPIO10E18

GPIO11E17

GPIO12H16

GPIO13J2

GPIO14J1

GPIO15K1

IC101LG1154AN_H13A H13A_NON_BRAZIL

INTR_GBBE1

INTR_AFE3CHE2

INTR_AGPIOD1

AUD_FS20CLKA6

AUD_FS21CLKB6

AUD_FS23CLKA5

AUD_FS24CLKB5

AUD_FS25CLKA4

AUDCLK_OUT_SUBC4

AUD_HDMI_MCLKC18

AUD_DAC1_LRCKA2

AUD_DAC1_SCKB2

AUD_DAC1_LRCHB1

AUD_DAC0_LRCKC2

AUD_DAC0_SCKC1

AUD_DAC0_LRCHD2

AUD_ADC_LRCKB4

AUD_ADC_SCKA3

AUD_ADC_LRCHB3

BB_SCLA7

BB_SDAB7

BB_TP_CLKE8

BB_TP_ERRD8

BB_TP_SOPC8

BB_TP_VALE7

BB_TP_DATA7D7

BB_TP_DATA6C7

BB_TP_DATA5E6

BB_TP_DATA4D6

BB_TP_DATA3C6

BB_TP_DATA2E5

BB_TP_DATA1D5

BB_TP_DATA0C5

CLK_F54MB10

CVBS_GC2C9

CVBS_GC1B9

CVBS_GC0A9

CVBS_UPD9

CVBS_DNE9

FS00CLKB11

AUDCLK_OUTA11

DAC_STARTD11

DAC_DATA4C11

DAC_DATA3E10

DAC_DATA2D10

DAC_DATA1C10

DAC_DATA0A10

AAD_GC4D13

AAD_GC3C13

AAD_GC2E12

AAD_GC1D12

AAD_GC0C12

AAD_DATA9C17

AAD_DATA8E16

AAD_DATA7D16

AAD_DATA6C16

AAD_DATA5E15

AAD_DATA4D15

AAD_DATA3C15

AAD_DATA2E14

AAD_DATA1D14

AAD_DATA0C14

AAD_DATAENE13

ADCO_OUT_CLKB18

HSR_AP0A12

HSR_AM0B12

HSR_BP0A13

HSR_BM0B13

HSR_CP0A14

HSR_CM0B14

HSR_CLKP0A15

HSR_CLKM0B15

HSR_DP0A16

HSR_DM0B16

HSR_EP0A17

HSR_EM0B17

IC100LG1154D_H13D

INTR_GBBAT16

INTR_AFE3CHAU17

INTR_AGPIOAT17

AUD_FS20CLKAT24

AUD_FS21CLKAU24

AUD_FS23CLKAT23

AUD_FS24CLKAU23

AUD_FS25CLKAT22

AUD_HDMI_MCLKAU36

AUD_DAC1_LRCKAT20

AUD_DAC1_SCKAU20

AUD_DAC1_LRCHAT19

AUD_DAC0_LRCKAU19

AUD_DAC0_SCKAT18

AUD_DAC0_LRCHAU18

AUD_ADC_LRCKAU22

AUD_ADC_SCKAT21

AUD_ADC_LRCHAU21

BB_SCLAT25

BB_SDAAU25

BB_TPI_CLKAP23

BB_TPI_ERRAR23

BB_TPI_SOPAP22

BB_TPI_VALAR22

BB_TPI_DATA7AP21

BB_TPI_DATA6AR21

BB_TPI_DATA5AP20

BB_TPI_DATA4AR20

BB_TPI_DATA3AP19

BB_TPI_DATA2AR19

BB_TPI_DATA1AP18

BB_TPI_DATA0AR18

CLK_54MAU28

CVBS_GC2AR24

CVBS_GC1AU27

CVBS_GC0AT27

CVBS_UPAP24

CVBS_DNAR25

FS00CLKAU29

H13A_AUDCLK_OUTAT29

DAC_STARTAP27

DAC_DATA4AR27

DAC_DATA3AP26

DAC_DATA2AR26

DAC_DATA1AP25

DAC_DATA0AT28

AAD_GC4AR30

AAD_GC3AP29

AAD_GC2AR29

AAD_GC1AP28

AAD_GC0AR28

AAD_DATA9AP35

AAD_DATA8AR35

AAD_DATA7AP34

AAD_DATA6AR34

AAD_DATA5AP33

AAD_DATA4AR33

AAD_DATA3AP32

AAD_DATA2AR32

AAD_DATA1AP31

AAD_DATA0AR31

AAD_DATAENAP30

ADCO_OUT_CLKAT36

HSR_APAT30

HSR_AMAU30

HSR_BPAT31

HSR_BMAU31

HSR_CPAT32

HSR_CMAU32

HSR_CLKPAT33

HSR_CLKMAU33

HSR_DPAT34

HSR_DMAU34

HSR_EPAT35

HSR_EMAU35

AUD_HPDRV_LRCHAT14

AUD_HPDRV_LRCKAT15

AUD_HPDRV_SCKAU15

FRC_LR_O_SYNC_FLAGAC7

L_VSOUT_LDAN5

DIM0_SCLKAR14

DIM0_MOSIAP14

DIM1_SCLKAN14

DIM1_MOSIAP13

PWM0AF6

PWM1AF7

PWM2AD7

PWM_INAE6

EPI_EOAP5

EPI_VSTAN8

EPI_DPMAP8

EPI_MCLKAR7

EPI_GCLKAN7

STPI0_CLK/GPIO47AK35

STPI0_SOP/GPIO46AK36

STPI0_VAL/GPIO45AK37

STPI0_ERR/GPIO44AJ35

STPI0_DATA/GPIO43AJ36

STPI1_CLK/GPIO42AH35

STPI1_SOP/GPIO41AH37

STPI1_VAL/GPIO40AH36

STPI1_ERR/GPIO55AG35

STPI1_DATA/GPIO54AG36

TP_DVB_CLKAM36

TP_DVB_SOPAL36

TP_DVB_VALAL35

TP_DVB_ERRAL37

TP_DVB_DATA0AM35

TP_DVB_DATA1AN36

TP_DVB_DATA2AN37

TP_DVB_DATA3AN35

TP_DVB_DATA4AP37

TP_DVB_DATA5AP36

TP_DVB_DATA6AR37

TP_DVB_DATA7AR36

TPI_CLKA28

TPI_SOPB29

TPI_VALB28

TPI_ERRC28

TPI_DATA0B32

TPI_DATA1C31

TPI_DATA2B31

TPI_DATA3A31

TPI_DATA4C30

TPI_DATA5A30

TPI_DATA6B30

TPI_DATA7C29

TPIO_CLK/GPIO53D30

TPIO_SOP/GPIO52D31

TPIO_VAL/GPIO51F30

TPIO_ERR/GPIO50E31

TPIO_DATA0/GPIO58E30

TPIO_DATA1/GPIO59F29


TPIO_DATA3/GPIO61F28


TPIO_DATA5/GPIO63D28


TPIO_DATA7/GPIO49D27

AUDCLK_OUTAD5

DACLRCHAD6

DACSLRCH/GPIO127Y6

PCMI3SCK/GPIO112Y7

DACSCKAC6

DACLRCKAC5

PCMI3LRCK/GPIO113AA6

PCMI3LRCHAB7

DACCLFCH/GPIO126AB5

IEC958OUTAU14

DACSUBMCLKAA32

DACSUBLRCHAA34

DACSUBSCKAA33

DACSUBLRCKAB34

TEST1AE32

TEST2AE33

TX0NAT6

TX0PAU6

TX1NAT5

TX1PAU5

TX2NAT4

TX2PAU4

TX3NAU3

TX3PAU2

TX4NAT2

TX4PAT1

TX5NAR4

TX5PAR3

TX6NAP1

TX6PAP2

TX7NAP4

TX7PAP3

TX8NAN4

TX8PAN3

TX9NAM4

TX9PAM3

TX10NAL4

TX10PAL3

TX11NAK1

TX11PAK2

TX12NAK4

TX12PAK3

TX13NAJ4

TX13PAJ3

TX14NAH4

TX14PAH3

TX15NAG4

TX15PAG3

TX16NAF1

TX16PAF2

TX17NAF4

TX17PAF3

TX18NAE4

TX18PAE3

TX19NAD4

TX19PAD3

TX20NAC4

TX20PAC3

TX21NAB1

TX21PAB2

TX22NAB4

TX22PAB3

TX23NAA4

TX23PAA3

TX_LOCKNAR5

R451 330

MHL_ON_OFF

R443-*1

220

TU_W_BR/TWR444-*1

220

TU_W_BR/TW

C436-*1100pF

TU_W_BR/TW

R487-*1

10K

TU_W_BR/TW/CO

MAIN AUDIO/VIDEO

Near Place Scart AMP

Placed as close as possible to SOC

Must be used

Close to IC4300

OP MODE[0:1] : SW[2:1] 00 => Normal Operaiton Mode /T32 Debug Mode 01 => Internal Test Purpose 10 => Internal Test Purpose 11 => Internal Test Purpose

XTAL SEL[1:0] : SW[4:3] 00 => Xtal Input 01 => CLK 24M from H13D 10 => XTAL Bypass from H13D

OP MODE Setting & Select XTAL Input

AFE 3CH REF Setting

Place JACK Side

Placed as close as possible to IC4300

MAIN Clock(24Mhz)


Clock for H13A

NC

I2S_I/F

DIMMING

Place SOC Side

Close to LG1154A

AUDIO IN

LG1154DLG1154A

FOR EMI

TXDCLKP/TX14P

TXD3N/TX13N

TXD4N/TX12N

TXD1N/TX16N

TXD2P/TX15P

TXD3P/TX13P

TXDCLKN/TX14N

TXD4P/TX12P

TXD2N/TX15N

TXD1P/TX16P

TXD0N/TX17N

TXD0P/TX17P

2012-11-13

BSD-NC4_H004-HD

EPI Output

H13 Ball Name


To ADC

Tuner IF Filter

Place at JACK SIDE



M1_DDR_A5

M0_DDR_DQ10

M0_DDR_CASN

M1_DDR_DM1

M1_DDR_WEN

C535 0.1uF

M1_DDR_DQ30

M0_DDR_DQ14

M0_DDR_VREFDQ

M1_DDR_DQ19

M1_DDR_DQS_N1

M1_DDR_DQS0

M1_DDR_A13

M0_DDR_DQ25

M1_DDR_RESET_N

M1_DDR_DQ28

M1_DDR_DQ29

M1_DDR_DQ4

M0_DDR_DQ4

M0_DDR_ODT

M0_DDR_DQ11

M0_DDR_DQ26

C561 0.1uF

M1_DDR_CKE

M1_DDR_A6

M0_DDR_A4

VDDC15_M1

M0_DDR_DQ10

M0_DDR_A3

M1_DDR_DQ18

M1_DDR_RASN

M1_DDR_DQ20

R544

2401%

M0_DDR_RESET_N

M0_DDR_DQS2

M1_DDR_DQ7

M0_DDR_DQ26

M0_DDR_DQ25

R513

1K

1%

M1_DDR_DQ3

M0_DDR_A6

C501

0.1uF

M0_DDR_DM2

M1_DDR_DQ14

M1_DDR_DQ28

M1_DDR_DQS_N0

M0_DDR_A6

M0_DDR_DQ27

M0_DDR_A11

M1_DDR_DQ5

M1_DDR_DQ10

M1_DDR_DQ6

M1_DDR_A14

M0_DDR_A2

R541

10K

M1_DDR_DQ12

M0_U_CLKN

M0_DDR_VREFCA

M1_DDR_DQ15

M0_DDR_DQ23

M1_DDR_DQ13

M0_DDR_DQ3

VDDC15_M0

M1_DDR_DM3

M1_1_DDR_VREFCA

M1_DDR_A11

M1_DDR_CKE

M1_D_CLKN

M0_DDR_A7

M0_DDR_A12

M0_1_DDR_VREFDQ

M0_DDR_DQS1

R516

1K

1%

C509

0.1uF

M0_DDR_A11

VDDC15_M1

R518

100

R514

1K1%

M1_DDR_DQS1 M1_DDR_DQS3

M1_DDR_CKE

M0_DDR_CASN

M1_DDR_A7

M0_DDR_DQS3

M0_DDR_BA0

M0_DDR_DQS_N0

R520

10K

M0_DDR_A1

M1_DDR_DQ11

M1_DDR_A1

M1_DDR_BA2

M0_DDR_DQS_N2

C504

0.1uF

M0_DDR_DM1

M1_DDR_A11

M1_DDR_DQ22

M0_D_CLKN

M1_DDR_A0

M0_DDR_DQ30

M1_DDR_A15

M1_1_DDR_VREFDQ

R538

1K

1%

M0_DDR_DQ18

M0_DDR_DQ0

M1_DDR_A8

M1_DDR_DQ25

M0_DDR_BA2

VDDC15_M1

M0_DDR_DQ24

R532

1K

1%

M1_DDR_BA0

M1_DDR_DQ26

M0_DDR_A8

M0_DDR_RASN

M1_DDR_A2

M1_DDR_A6

M0_U_CLK

R533

1K

1%

M0_DDR_VREFDQ

M1_DDR_VREFDQ

VDDC15_M0

M1_DDR_A9

M1_DDR_DQ16

M0_DDR_DQ29

M1_DDR_A12

M1_DDR_A5

VDDC15_M0

M1_DDR_DQ12

M1_U_CLKN

M1_DDR_RASN

M0_DDR_DM0

M0_DDR_DQ15

M0_DDR_DQ6

C566 0.1uF

M0_DDR_A2

M1_DDR_A3

M1_DDR_DQ8

M0_DDR_DQ9

M0_DDR_DQ20

R501240

1%

M1_D_CLK

M0_DDR_BA0

M1_DDR_DM2

M0_DDR_DQ30

M0_DDR_DQ27

M1_DDR_VREFCA

M0_D_CLK

C530 0.1uF

M0_DDR_DQ22

M0_DDR_A2

M1_DDR_A13

M0_DDR_BA0

C505

0.1uF

M1_DDR_CASN

M0_1_DDR_VREFCA

C512

0.1uF

R545 240

M0_DDR_DQ17

M0_DDR_DQ15

M1_DDR_DQ0

M1_DDR_A1

M0_DDR_ODT

M1_DDR_BA1

M1_DDR_DQ25

M0_DDR_WEN

M1_DDR_DQ29

M1_DDR_VREFDQ

M1_DDR_DQ9

M0_DDR_DM1

M0_DDR_DQ0

M0_DDR_DQ2

M1_DDR_A7

M1_DDR_DQ21

M0_1_DDR_VREFCA

M0_DDR_A4

M1_DDR_DQ13

M0_DDR_CASN

M1_DDR_A11

C529 0.1uF

M1_DDR_DQ16

C567 0.1uF

M0_DDR_DQ5

M0_DDR_DQ14

M1_DDR_DM2

M1_DDR_DM0

M1_DDR_A0

M0_DDR_A0

M0_DDR_DQS_N1

M1_DDR_DQ10

M1_DDR_A5

M1_U_CLK

M0_DDR_DM0

M1_DDR_DQ18

M0_DDR_DQS_N0

M0_DDR_VREFCA

R535

100

M0_DDR_DQ6

M1_DDR_A7

M1_D_CLKN

M0_DDR_DQ21

VDDC15_M1

M0_DDR_A10

M1_DDR_DQ7

C513

0.1uF

M1_U_CLK

M1_DDR_DQ2

VDDC15_M0

M1_DDR_A10

M0_DDR_A8

M1_DDR_DQ14

M1_DDR_RESET_N

M0_DDR_DQ1

M0_DDR_DQ29

M0_DDR_DQS2

M0_DDR_A13

M1_DDR_A15

M0_DDR_DQS1

M1_DDR_DQ17

R537

1K

1%

M1_DDR_DQ1

M0_DDR_RESET_N

M1_DDR_A10

M1_DDR_A8

M1_DDR_BA1

M1_DDR_DQS_N2

M1_U_CLKN

M0_DDR_A5

M1_DDR_DQ23

M0_DDR_DM3

M0_DDR_DQ19

VDDC15_M0

R512

1K

1%

M1_DDR_CASN

M0_DDR_DQ8

M0_U_CLKN

M0_DDR_DQ22

M1_DDR_A13

M1_DDR_BA2

M0_DDR_BA1

M0_DDR_A15

M0_DDR_DM2

M0_DDR_A9

M1_DDR_DQS_N2

M0_DDR_DQ1

M1_DDR_WEN

M0_DDR_A4

M1_DDR_A4

M1_DDR_DQ5

M1_DDR_A9

M0_DDR_CKE

M0_DDR_DQ16

M0_DDR_A9

M1_DDR_DM1

M0_DDR_DQ5

M1_DDR_A1

R539

1K

1%

C508

0.1uF

M1_DDR_DQ24

M0_DDR_DQ18

M0_U_CLKN

VDDC15_M0

M0_1_DDR_VREFDQ

M1_DDR_DQ31

M1_DDR_DQ21

M0_DDR_CKE

M0_DDR_DQ31

M0_DDR_A15

M0_DDR_DQ8

M0_DDR_DQ13

M0_DDR_A15

M0_DDR_DQ19

M1_1_DDR_VREFCA

M0_D_CLK

M0_DDR_DQ7

M1_DDR_A3

M0_DDR_RASN

M1_DDR_A14

M1_DDR_DQS_N1

M1_DDR_ODT

M1_DDR_DQS2

R511

1K

1%

M0_DDR_WEN

M1_DDR_DQ4

M1_DDR_A2

M0_DDR_DQ12

M0_DDR_A14

M1_DDR_A8

M0_DDR_DQ28

M0_DDR_DQS_N3

R521

10K

R536

1K

1%

M1_DDR_DQ11

M1_DDR_DQ6

M0_DDR_A6

M1_DDR_VREFCA

M0_DDR_DQ3

M1_DDR_DQ27

M0_DDR_A5

M0_DDR_DQ4

M1_DDR_BA0

M0_DDR_DQ7

M0_DDR_A14

M1_DDR_DQ15

R510

1K

1%

M1_DDR_DQ26

M1_DDR_A0

M0_D_CLKN

M1_DDR_A4

M0_DDR_A1

VDDC15_M1

M0_DDR_A0

M1_DDR_DQ22

M0_DDR_CKE

M0_DDR_WEN

VDDC15_M1

M1_DDR_A2

M1_DDR_A3

M1_DDR_DQ17

M1_D_CLK

M1_DDR_DM3

M1_DDR_DQS3

M0_DDR_A12

M0_U_CLK

M1_DDR_DQ30

M1_D_CLK

M0_DDR_A10

R515

1K

1%

M1_DDR_CKE

M0_DDR_DQ31

M0_DDR_ODT

M0_DDR_RESET_N

M0_DDR_A0

M1_DDR_DQS_N3

M0_DDR_DQ24

M1_DDR_DQ2

M0_DDR_CKE

M1_DDR_RESET_N

M1_DDR_A15

M1_DDR_ODT

M1_DDR_DQ19

R517

1K

1%

M1_DDR_CASN

M0_DDR_A13

M0_D_CLK

M0_DDR_DQS0

M0_DDR_DQS_N3

M0_DDR_DQS3

R531

1K

1%

M1_DDR_DQ1

M1_DDR_A12

M0_DDR_DQS_N2

M0_DDR_DQ13

M1_DDR_A9

M0_DDR_A13

M1_DDR_DM0

M0_DDR_BA2

M1_DDR_BA1

M1_DDR_DQ9

M0_DDR_A5

C562 0.1uF

M0_DDR_A9

M0_DDR_DQ2

M1_DDR_DQ3

M0_DDR_DQ11

M1_D_CLKN

M0_DDR_DQS0

M1_DDR_DQ0

M1_DDR_BA2

R519

100

C500

0.1uF

M1_DDR_DQ23

M1_DDR_ODT

M1_DDR_DQ27

M1_DDR_DQ8

M0_U_CLK

M1_DDR_DQS1

M0_DDR_A1

M0_DDR_BA1

M1_DDR_A10

M1_DDR_DQ24

M0_DDR_A10

R530

100

M0_DDR_DQ20

M1_DDR_A14

VDDC15_M0

M0_DDR_A3

M1_DDR_BA0

M1_DDR_DQS_N3

M0_DDR_DM3

M1_DDR_A6

M1_DDR_RESET_N

M0_DDR_RASN

M0_DDR_A7

M0_DDR_DQ28

M0_DDR_RESET_N

R540

10K

M0_DDR_DQ23

R500240

1%

M0_DDR_BA1

M0_DDR_DQ21

M0_DDR_DQ9

M1_DDR_DQS0

M0_DDR_DQS_N1

M1_DDR_DQ20

M0_DDR_DQ16

M1_U_CLK

M1_1_DDR_VREFDQ

M1_DDR_DQ31

M1_DDR_A12

R543 240

M0_DDR_A8

M0_DDR_A7

M0_DDR_DQ12

VDDC15_M1

M1_U_CLKN

M1_DDR_DQS2

M1_DDR_DQS_N0

M1_DDR_WEN

M0_DDR_A12

M0_DDR_A14

M1_DDR_RASN

M0_DDR_DQ17

R534

1K

1%

M0_D_CLKN

M1_DDR_A4

R542

2401%

M0_DDR_BA2

M0_DDR_A11

M0_DDR_A3

C534 0.1uF

K4B4G1646B-HCK0IC500

DDR_SAMSUNG

A0N3

A1P7

A2P3

A3N2

A4P8

A5P2

A6R8

A7R2

A8T8

A9R3

A10/APL7

A11R7

A12/BCN7

A13T3

A15M7

BA0M2

BA1N8

BA2M3

CKJ7

CKK7

CKEK9

CSL2

ODTK1

RASJ3

CASK3

WEL3

RESETT2

DQSLF3

DQSLG3

DQSUC7

DQSUB7

DMLE7

DMUD3

DQL0E3

DQL1F7

DQL2F2

DQL3F8

DQL4H3

DQL5H8

DQL6G2

DQL7H7

DQU0D7

DQU1C3

DQU2C8

DQU3C2

DQU4A7

DQU5A2

DQU6B8

DQU7A3

VREFCAM8

VREFDQH1

ZQL8

VDD_1B2

VDD_2D9

VDD_3G7

VDD_4K2

VDD_5K8

VDD_6N1

VDD_7N9

VDD_8R1

VDD_9R9

VDDQ_1A1

VDDQ_2A8

VDDQ_3C1

VDDQ_4C9

VDDQ_5D2

VDDQ_6E9

VDDQ_7F1

VDDQ_8H2

VDDQ_9H9

NC_1J1

NC_2J9

NC_3L1

NC_4L9

A14T7

VSS_1A9

VSS_2B3

VSS_3E1

VSS_4G8

VSS_5J2

VSS_6J8

VSS_7M1

VSS_8M9

VSS_9P1

VSS_10P9

VSS_11T1

VSS_12T9

VSSQ_1B1

VSSQ_2B9

VSSQ_3D1

VSSQ_4D8

VSSQ_5E2

VSSQ_6E8

VSSQ_7F9

VSSQ_8G1

VSSQ_9G9


DDR_SAMSUNG

A0N3

A1P7

A2P3

A3N2

A4P8

A5P2

A6R8

A7R2

A8T8

A9R3

A10/APL7

A11R7

A12/BCN7

A13T3

A15M7

BA0M2

BA1N8

BA2M3

CKJ7

CKK7

CKEK9

CSL2

ODTK1

RASJ3

CASK3

WEL3

RESETT2

DQSLF3

DQSLG3

DQSUC7

DQSUB7

DMLE7

DMUD3

DQL0E3

DQL1F7

DQL2F2

DQL3F8

DQL4H3

DQL5H8

DQL6G2

DQL7H7

DQU0D7

DQU1C3

DQU2C8

DQU3C2

DQU4A7

DQU5A2

DQU6B8

DQU7A3

VREFCAM8

VREFDQH1

ZQL8

VDD_1B2

VDD_2D9

VDD_3G7

VDD_4K2

VDD_5K8

VDD_6N1

VDD_7N9

VDD_8R1

VDD_9R9

VDDQ_1A1

VDDQ_2A8

VDDQ_3C1

VDDQ_4C9

VDDQ_5D2

VDDQ_6E9

VDDQ_7F1

VDDQ_8H2

VDDQ_9H9

NC_1J1

NC_2J9

NC_3L1

NC_4L9

A14T7

VSS_1A9

VSS_2B3

VSS_3E1

VSS_4G8

VSS_5J2

VSS_6J8

VSS_7M1

VSS_8M9

VSS_9P1

VSS_10P9

VSS_11T1

VSS_12T9

VSSQ_1B1

VSSQ_2B9

VSSQ_3D1

VSSQ_4D8

VSSQ_5E2

VSSQ_6E8

VSSQ_7F9

VSSQ_8G1

VSSQ_9G9


DDR_SAMSUNG

A0N3

A1P7

A2P3

A3N2

A4P8

A5P2

A6R8

A7R2

A8T8

A9R3

A10/APL7

A11R7

A12/BCN7

A13T3

A15M7

BA0M2

BA1N8

BA2M3

CKJ7

CKK7

CKEK9

CSL2

ODTK1

RASJ3

CASK3

WEL3

RESETT2

DQSLF3

DQSLG3

DQSUC7

DQSUB7

DMLE7

DMUD3

DQL0E3

DQL1F7

DQL2F2

DQL3F8

DQL4H3

DQL5H8

DQL6G2

DQL7H7

DQU0D7

DQU1C3

DQU2C8

DQU3C2

DQU4A7

DQU5A2

DQU6B8

DQU7A3

VREFCAM8

VREFDQH1

ZQL8

VDD_1B2

VDD_2D9

VDD_3G7

VDD_4K2

VDD_5K8

VDD_6N1

VDD_7N9

VDD_8R1

VDD_9R9

VDDQ_1A1

VDDQ_2A8

VDDQ_3C1

VDDQ_4C9

VDDQ_5D2

VDDQ_6E9

VDDQ_7F1

VDDQ_8H2

VDDQ_9H9

NC_1J1

NC_2J9

NC_3L1

NC_4L9

A14T7

VSS_1A9

VSS_2B3

VSS_3E1

VSS_4G8

VSS_5J2

VSS_6J8

VSS_7M1

VSS_8M9

VSS_9P1

VSS_10P9

VSS_11T1

VSS_12T9

VSSQ_1B1

VSSQ_2B9

VSSQ_3D1

VSSQ_4D8

VSSQ_5E2

VSSQ_6E8

VSSQ_7F9

VSSQ_8G1

VSSQ_9G9


DDR_SAMSUNG

A0N3

A1P7

A2P3

A3N2

A4P8

A5P2

A6R8

A7R2

A8T8

A9R3

A10/APL7

A11R7

A12/BCN7

A13T3

A15M7

BA0M2

BA1N8

BA2M3

CKJ7

CKK7

CKEK9

CSL2

ODTK1

RASJ3

CASK3

WEL3

RESETT2

DQSLF3

DQSLG3

DQSUC7

DQSUB7

DMLE7

DMUD3

DQL0E3

DQL1F7

DQL2F2

DQL3F8

DQL4H3

DQL5H8

DQL6G2

DQL7H7

DQU0D7

DQU1C3

DQU2C8

DQU3C2

DQU4A7

DQU5A2

DQU6B8

DQU7A3

VREFCAM8

VREFDQH1

ZQL8

VDD_1B2

VDD_2D9

VDD_3G7

VDD_4K2

VDD_5K8

VDD_6N1

VDD_7N9

VDD_8R1

VDD_9R9

VDDQ_1A1

VDDQ_2A8

VDDQ_3C1

VDDQ_4C9

VDDQ_5D2

VDDQ_6E9

VDDQ_7F1

VDDQ_8H2

VDDQ_9H9

NC_1J1

NC_2J9

NC_3L1

NC_4L9

A14T7

VSS_1A9

VSS_2B3

VSS_3E1

VSS_4G8

VSS_5J2

VSS_6J8

VSS_7M1

VSS_8M9

VSS_9P1

VSS_10P9

VSS_11T1

VSS_12T9

VSSQ_1B1

VSSQ_2B9

VSSQ_3D1

VSSQ_4D8

VSSQ_5E2

VSSQ_6E8

VSSQ_7F9

VSSQ_8G1

VSSQ_9G9

H5TQ4G63AFR-PBCIC500-*1DDR_HYNIX

A0N3

A1P7

A2P3

A3N2

A4P8

A5P2

A6R8

A7R2

A8T8

A9R3

A10/APL7

A11R7

A12/BCN7

A13T3

A15M7

BA0M2

BA1N8

BA2M3

CKJ7

CKK7

CKEK9

CSL2

ODTK1

RASJ3

CASK3

WEL3

RESETT2

DQSLF3

DQSLG3

DQSUC7

DQSUB7

DMLE7

DMUD3

DQL0E3

DQL1F7

DQL2F2

DQL3F8

DQL4H3

DQL5H8

DQL6G2

DQL7H7

DQU0D7

DQU1C3

DQU2C8

DQU3C2

DQU4A7

DQU5A2

DQU6B8

DQU7A3

VREFCAM8

VREFDQH1

ZQL8

VDD_1B2

VDD_2D9

VDD_3G7

VDD_4K2

VDD_5K8

VDD_6N1

VDD_7N9

VDD_8R1

VDD_9R9

VDDQ_1A1

VDDQ_2A8

VDDQ_3C1

VDDQ_4C9

VDDQ_5D2

VDDQ_6E9

VDDQ_7F1

VDDQ_8H2

VDDQ_9H9

NC_1J1

NC_2J9

NC_3L1

NC_4L9

A14T7

VSS_1A9

VSS_2B3

VSS_3E1

VSS_4G8

VSS_5J2

VSS_6J8

VSS_7M1

VSS_8M9

VSS_9P1

VSS_10P9

VSS_11T1

VSS_12T9

VSSQ_1B1

VSSQ_2B9

VSSQ_3D1

VSSQ_4D8

VSSQ_5E2

VSSQ_6E8

VSSQ_7F9

VSSQ_8G1

VSSQ_9G9

H5TQ4G63AFR-PBCIC502-*1

DDR_HYNIX

A0N3

A1P7

A2P3

A3N2

A4P8

A5P2

A6R8

A7R2

A8T8

A9R3

A10/APL7

A11R7

A12/BCN7

A13T3

A15M7

BA0M2

BA1N8

BA2M3

CKJ7

CKK7

CKEK9

CSL2

ODTK1

RASJ3

CASK3

WEL3

RESETT2

DQSLF3

DQSLG3

DQSUC7

DQSUB7

DMLE7

DMUD3

DQL0E3

DQL1F7

DQL2F2

DQL3F8

DQL4H3

DQL5H8

DQL6G2

DQL7H7

DQU0D7

DQU1C3

DQU2C8

DQU3C2

DQU4A7

DQU5A2

DQU6B8

DQU7A3

VREFCAM8

VREFDQH1

ZQL8

VDD_1B2

VDD_2D9

VDD_3G7

VDD_4K2

VDD_5K8

VDD_6N1

VDD_7N9

VDD_8R1

VDD_9R9

VDDQ_1A1

VDDQ_2A8

VDDQ_3C1

VDDQ_4C9

VDDQ_5D2

VDDQ_6E9

VDDQ_7F1

VDDQ_8H2

VDDQ_9H9

NC_1J1

NC_2J9

NC_3L1

NC_4L9

A14T7

VSS_1A9

VSS_2B3

VSS_3E1

VSS_4G8

VSS_5J2

VSS_6J8

VSS_7M1

VSS_8M9

VSS_9P1

VSS_10P9

VSS_11T1

VSS_12T9

VSSQ_1B1

VSSQ_2B9

VSSQ_3D1

VSSQ_4D8

VSSQ_5E2

VSSQ_6E8

VSSQ_7F9

VSSQ_8G1

VSSQ_9G9

H5TQ4G63AFR-PBC

IC503-*1DDR_HYNIX

A0N3

A1P7

A2P3

A3N2

A4P8

A5P2

A6R8

A7R2

A8T8

A9R3

A10/APL7

A11R7

A12/BCN7

A13T3

A15M7

BA0M2

BA1N8

BA2M3

CKJ7

CKK7

CKEK9

CSL2

ODTK1

RASJ3

CASK3

WEL3

RESETT2

DQSLF3

DQSLG3

DQSUC7

DQSUB7

DMLE7

DMUD3

DQL0E3

DQL1F7

DQL2F2

DQL3F8

DQL4H3

DQL5H8

DQL6G2

DQL7H7

DQU0D7

DQU1C3

DQU2C8

DQU3C2

DQU4A7

DQU5A2

DQU6B8

DQU7A3

VREFCAM8

VREFDQH1

ZQL8

VDD_1B2

VDD_2D9

VDD_3G7

VDD_4K2

VDD_5K8

VDD_6N1

VDD_7N9

VDD_8R1

VDD_9R9

VDDQ_1A1

VDDQ_2A8

VDDQ_3C1

VDDQ_4C9

VDDQ_5D2

VDDQ_6E9

VDDQ_7F1

VDDQ_8H2

VDDQ_9H9

NC_1J1

NC_2J9

NC_3L1

NC_4L9

A14T7

VSS_1A9

VSS_2B3

VSS_3E1

VSS_4G8

VSS_5J2

VSS_6J8

VSS_7M1

VSS_8M9

VSS_9P1

VSS_10P9

VSS_11T1

VSS_12T9

VSSQ_1B1

VSSQ_2B9

VSSQ_3D1

VSSQ_4D8

VSSQ_5E2

VSSQ_6E8

VSSQ_7F9

VSSQ_8G1

VSSQ_9G9

H5TQ4G63AFR-PBC

IC501-*1DDR_HYNIX

A0N3

A1P7

A2P3

A3N2

A4P8

A5P2

A6R8

A7R2

A8T8

A9R3

A10/APL7

A11R7

A12/BCN7

A13T3

A15M7

BA0M2

BA1N8

BA2M3

CKJ7

CKK7

CKEK9

CSL2

ODTK1

RASJ3

CASK3

WEL3

RESETT2

DQSLF3

DQSLG3

DQSUC7

DQSUB7

DMLE7

DMUD3

DQL0E3

DQL1F7

DQL2F2

DQL3F8

DQL4H3

DQL5H8

DQL6G2

DQL7H7

DQU0D7

DQU1C3

DQU2C8

DQU3C2

DQU4A7

DQU5A2

DQU6B8

DQU7A3

VREFCAM8

VREFDQH1

ZQL8

VDD_1B2

VDD_2D9

VDD_3G7

VDD_4K2

VDD_5K8

VDD_6N1

VDD_7N9

VDD_8R1

VDD_9R9

VDDQ_1A1

VDDQ_2A8

VDDQ_3C1

VDDQ_4C9

VDDQ_5D2

VDDQ_6E9

VDDQ_7F1

VDDQ_8H2

VDDQ_9H9

NC_1J1

NC_2J9

NC_3L1

NC_4L9

A14T7

VSS_1A9

VSS_2B3

VSS_3E1

VSS_4G8

VSS_5J2

VSS_6J8

VSS_7M1

VSS_8M9

VSS_9P1

VSS_10P9

VSS_11T1

VSS_12T9

VSSQ_1B1

VSSQ_2B9

VSSQ_3D1

VSSQ_4D8

VSSQ_5E2

VSSQ_6E8

VSSQ_7F9

VSSQ_8G1

VSSQ_9G9

IC100LG1154D_H13D

M0_DDR_A[0]F15

M0_DDR_A[1]F13

M0_DDR_A[2]F17

M0_DDR_A[3]F19

M0_DDR_A[4]E10

M0_DDR_A[5]E18

M0_DDR_A[6]E11

M0_DDR_A[7]F18

M0_DDR_A[8]F11

M0_DDR_A[9]F16

M0_DDR_A[10]E9

M0_DDR_A[11]E12

M0_DDR_A[12]E13

M0_DDR_A[13]E16

M0_DDR_A[14]F12

M0_DDR_A[15]F14

M0_DDR_BA[0]E19

M0_DDR_BA[1]F10

M0_DDR_BA[2]E15

M0_DDR_U_CLKB10

M0_DDR_U_CLKNA10

M0_DDR_D_CLKA19

M0_DDR_D_CLKNB19

M0_DDR_CKEE14

M0_DDR_ODTF21

M0_DDR_RASNE21

M0_DDR_CASNE20

M0_DDR_WENF20

M0_DDR_RESET_NE17

M0_DDR_ZQCALF9

M0_DDR_DQS[0]B20

M0_DDR_DQS_N[0]A20

M0_DDR_DQS[1]C19

M0_DDR_DQS_N[1]D19

M0_DDR_DQS[2]A11

M0_DDR_DQS_N[2]B11

M0_DDR_DQS[3]C10

M0_DDR_DQS_N[3]D10

M0_DDR_DM[0]D18

M0_DDR_DM[1]C20

M0_DDR_DM[2]D9

M0_DDR_DM[3]C11

M0_DDR_DQ[0]D22

M0_DDR_DQ[1]C15

M0_DDR_DQ[2]C23

M0_DDR_DQ[3]D16

M0_DDR_DQ[4]B24

M0_DDR_DQ[5]B15

M0_DDR_DQ[6]D23

M0_DDR_DQ[7]A15

M0_DDR_DQ[8]C16

M0_DDR_DQ[9]D21

M0_DDR_DQ[10]D17

M0_DDR_DQ[11]C22

M0_DDR_DQ[12]C18

M0_DDR_DQ[13]C21

M0_DDR_DQ[14]C17

M0_DDR_DQ[15]D20

M0_DDR_DQ[16]C13

M0_DDR_DQ[17]D7

M0_DDR_DQ[18]D13

M0_DDR_DQ[19]C6

M0_DDR_DQ[20]D14

M0_DDR_DQ[21]D6

M0_DDR_DQ[22]C14

M0_DDR_DQ[23]A5

M0_DDR_DQ[24]C7

M0_DDR_DQ[25]D12

M0_DDR_DQ[26]D8

M0_DDR_DQ[27]B13

M0_DDR_DQ[28]C9

M0_DDR_DQ[29]C12

M0_DDR_DQ[30]C8

M0_DDR_DQ[31]D11

IC100LG1154D_H13D

M1_DDR_A[0]N6

M1_DDR_A[1]R6

M1_DDR_A[2]L6

M1_DDR_A[3]J6

M1_DDR_A[4]U5

M1_DDR_A[5]J5

M1_DDR_A[6]T5

M1_DDR_A[7]K6

M1_DDR_A[8]U6

M1_DDR_A[9]M6

M1_DDR_A[10]V5

M1_DDR_A[11]R5

M1_DDR_A[12]P5

M1_DDR_A[13]L5

M1_DDR_A[14]T6

M1_DDR_A[15]P6

M1_DDR_BA[0]H5

M1_DDR_BA[1]V6

M1_DDR_BA[2]M5

M1_DDR_U_CLKR2

M1_DDR_U_CLKNR1

M1_DDR_D_CLKF1

M1_DDR_D_CLKNF2

M1_DDR_CKEN5

M1_DDR_ODTG6

M1_DDR_RASNF5

M1_DDR_CASNG5

M1_DDR_WENH6

M1_DDR_RESET_NK5

M1_DDR_ZQCALF6

M1_DDR_DQS[0]E2

M1_DDR_DQS_N[0]E1

M1_DDR_DQS[1]F3

M1_DDR_DQS_N[1]F4

M1_DDR_DQS[2]P1

M1_DDR_DQS_N[2]P2

M1_DDR_DQS[3]R3

M1_DDR_DQS_N[3]R4

M1_DDR_DM[0]G4

M1_DDR_DM[1]E3

M1_DDR_DM[2]T4

M1_DDR_DM[3]P3

M1_DDR_DQ[0]C4

M1_DDR_DQ[1]K3

M1_DDR_DQ[2]B3

M1_DDR_DQ[3]J4

M1_DDR_DQ[4]A3

M1_DDR_DQ[5]K2

M1_DDR_DQ[6]B4

M1_DDR_DQ[7]K1

M1_DDR_DQ[8]J3

M1_DDR_DQ[9]D4

M1_DDR_DQ[10]H4

M1_DDR_DQ[11]C3

M1_DDR_DQ[12]G3

M1_DDR_DQ[13]D3

M1_DDR_DQ[14]H3

M1_DDR_DQ[15]E4

M1_DDR_DQ[16]M3

M1_DDR_DQ[17]V4

M1_DDR_DQ[18]M4

M1_DDR_DQ[19]W3

M1_DDR_DQ[20]L4

M1_DDR_DQ[21]W4

M1_DDR_DQ[22]L3

M1_DDR_DQ[23]Y2

M1_DDR_DQ[24]V3

M1_DDR_DQ[25]N4

M1_DDR_DQ[26]U4

M1_DDR_DQ[27]M2

M1_DDR_DQ[28]T3

M1_DDR_DQ[29]N3

M1_DDR_DQ[30]U3

M1_DDR_DQ[31]P4

MAIN DDR

H5TQ1G63DFR-PBC(x16)

DDR34Gbit(x16)

DDR34Gbit(x16)

4Gbit : T7(A14)

DDR3 1.5V bypass Cap - Place these caps near Memory

1Gbit : T7(NC_6)

Real USE : 1Gbit

DDR3 1.5V bypass Cap - Place these caps near Memory

DDR34Gbit(x16)

DDR34Gbit(x16)

2012-09-14

BSD-NC4_H005-HD



CI_DATA[7]

CI_DATA[1]

CI_DATA[5]

CI_DATA[3]

CI_DATA[2]

CI_DATA[6]

CI_DATA[0]

EB_DATA[0-7]

CI_DATA[4]

TPO_DATA[3]

TPO_DATA[4]

TPO_DATA[0]

TPO_DATA[7]

TPO_DATA[1]

TPO_DATA[5]

TPO_DATA[6]

TPO_DATA[2]

CI_ADDR[9]

CI_DATA[1]

CI_IN_TS_DATA[6]

CI_ADDR[1]

CI_DATA[6]

CI_IN_TS_DATA[3]

CI_ADDR[5]

CI_ADDR[13]

CI_IN_TS_DATA[2]

CI_ADDR[8]

CI_ADDR[2]

CI_ADDR[3]

CI_ADDR[4]

CI_DATA[0]

CI_DATA[7]

CI_DATA[4]

CI_ADDR[12]

CI_ADDR[11]

CI_IN_TS_DATA[0]

CI_DATA[5]

CI_ADDR[14]

CI_DATA[3]

CI_DATA[2]

CI_ADDR[10]

CI_ADDR[0]

CI_IN_TS_DATA[1]

CI_ADDR[7]CI_IN_TS_DATA[7]

CI_ADDR[6]

CI_IN_TS_DATA[4]

CI_IN_TS_DATA[5]

EB_DATA[0]

EB_DATA[1]

EB_DATA[2]

EB_DATA[3]

EB_DATA[4]

EB_DATA[5]

EB_DATA[6]

EB_DATA[7]

CI_DATA[0-7]

CI_ADDR[13]

CI_ADDR[8]

CI_ADDR[7]

EB_ADDR[12]

/PCM_IOWR

EB_ADDR[0]

CI_ADDR[1]

EB_BE_N1

EB_ADDR[1]

CI_ADDR[11]

EB_ADDR[13]

CI_ADDR[9]

AR70833

CI

AR70933

CI

CI_ADDR[5]

CI_ADDR[2]

EB_OE_N/PCM_OE

EB_ADDR[2]

EB_ADDR[10]

AR71133

CI

AR71233

CI

EB_DATA[0-7]

CI_DATA[0-7]

EB_ADDR[6]

CI_ADDR[4]

/PCM_WE

EB_ADDR[5]

EB_ADDR[4]

EB_ADDR[8]

AR70733

CI

EB_ADDR[11]

EB_WE_N

EB_ADDR[3]

/PCM_IORD

CI_ADDR[0]

CI_ADDR[6]

CI_ADDR[14] EB_ADDR[14]

EB_BE_N0EB_ADDR[7]

CI_ADDR[12]

CI_ADDR[3] CAM_REG_N

EB_ADDR[9]

CI_ADDR[10]

AR71033

CI

AR71333

CI

/PCM_REG

TPO_CLK

TPO_VAL

TPO_DATA[0-7]

TPO_SOP

/PCM_WE

/PCM_OE

PCM_INPACK

+5V_CI_ON

CI_TS_CLK

CI_ADDR[0]

CI_ADDR[10]/PCM_IORD

/PCM_CE1

CI_ADDR[8]

CI_ADDR[14]

R70610KOPT

/PCM_REG

CI_TS_DATA[1]

R715 0

OPT

R713 0

OPT

/PCM_IOWR

CI_ADDR[4]

R70410KOPT

CI_TS_DATA[0]

/PCM_IRQA

/CI_CD1

CI_IN_TS_VAL

CI_TS_VAL CI_ADDR[1]

CI_ADDR[11]

PCM_INPACK

CI_VS1

CI_TS_DATA[3]

+5V_CI_ON

CI_TS_DATA[5]

R710 0

OPT

CI_ADDR[9]

R70910KCI

R718 0

OPT

CI_TS_DATA[7]

+5V_CI_ON

/CI_CD2

R71110KOPT

C706 0.1uF

CI

CI_DATA[0-7]

R70710KOPT

CI_TS_DATA[6]

R70810KOPT

CI_TS_DATA[4]

CI_TS_SYNC

C7020.1uFCI

R71210KOPT

CI_TS_DATA[2]CI_VS1

+5V_CI_ON

R719 10K

OPT

CI_IN_TS_DATA[0-7]

CI_ADDR[7]

R72010KOPT

+5V_CI_ON

CI_ADDR[3]

/PCM_CE2

R72410KOPT

CI_ADDR[13]

+5V_CI_ON

R714 0 CI

R716 100

CI

R72510KOPT

R72310KCI

CI_ADDR[5]

/PCM_WAIT

CI_ADDR[2]

CI_ADDR[6]

R717 100CI

/PCM_CE2

CI_IN_TS_SYNC

PCM_RESET

C7070.1uF16V

CI

CI_IN_TS_CLK

CI_ADDR[12]

AR70633CI

AR70533

CI

AR70133

CI

CI_IN_TS_DATA[7]

CI_IN_TS_DATA[6]

CI_IN_TS_DATA[0]

CI_IN_TS_DATA[1]

CI_IN_TS_DATA[5]

CI_IN_TS_DATA[2]

CI_IN_TS_DATA[4]

CI_IN_TS_DATA[3]

CI_IN_TS_SYNC

CI_IN_TS_VAL

CI_IN_TS_CLK

TPI_DATA[7]

AR700

100

CI

CAM_CD1_N

CAM_INPACK_N

C7000.1uF16V

CI

CI_TS_DATA[7]

AR703

100

CIPCM_INPACK

CI_TS_DATA[2]

CI_TS_SYNC

TPI_VAL

CAM_IREQ_N

TPI_DATA[4]

TPI_DATA[5]

TPI_DATA[2]

CAM_WAIT_N/PCM_WAIT

TPI_DATA[0]

TPI_SOP

/CI_CD1

TPI_DATA[3]

CI_TS_DATA[1]

/CI_CD2

CI_TS_CLK

CI_TS_DATA[5]

R703

10K

/PCM_IRQA

CI_TS_VAL

CI_TS_DATA[4]

CI_TS_DATA[0]

CAM_CD2_N

TPI_DATA[6]

TPI_CLK

R705

10K

TPI_DATA[1]

C7010.1uF16V

CI

+5V_NORMAL

CI_TS_DATA[6]

AR704

100

CI

CI_TS_DATA[3]

AR702

100

R701 33 CI

R702 33 CI

R700 33 OPT

R721 33CI

R722 33

OPT

C70512pF50VOPT

C70412pF50VOPT

JK70010120698-015LF

CI

G1G2

57

21

52

16

10

47

41

5

36

59

23

45

54

18

49

43

13

7

38

2

25

56

20

51

15

9

46

40

4

35

58

22

53

17

11

48

42

12

6

37

1

24

55

19

50

44

14

8

39

3

2660

2761

2862

2963

3064

31

32

33

34

65

66

67

68

69

C7034.7uF10VCI

BSD-NC4_H007-HD

2012-10-20

PCMCIA


THERMAL

THERMAL

THERMAL

THERMAL

THERMAL

THERMAL

THERMAL

THERMAL


2013.03.05

POWER_BLOCK(OLED) 23

NC4_H13

L2311

BLM18PG121SN1D

NON_OLED

IC2302

AP7173-SPG-13 HF(DIODES)

3VCC

2PG

4EN

1IN

5GND

6SS

7FB

8OUT

9

[EP]

L23081uH

+24V

POWER_ON/OFF2_2

C23380.1uF50V

C23160.1uF

50V

L2300

BLM18PG121SN1D

R2305

15K

1/16W

1%

C234322uF10V

OPT

C2329150pF50V

C23070.1uF16V

C236122uF10V

+5V_NORMAL

C23470.1uF50V

R2335330K1/16W 5%

C2354

0.1uF16V

C23480.1uF16V

R2331

10K

C233610uF10V

R230010K

R2306

33K

1%

C230110uF16V

C2318

0.1uF16V

R23101K

R234056K1/16W1%

R2301

10K

C23123300pF50V

R2343

16K

1%

R230410K

C23550.1uF16V

Q2301MMBT3904(NXP)

E

B

C

C23101uF10V

C230310uF16V

R2315

0

1/16W

5%

IC2300TPS54327DDAR

DCDC_TI

3VREG5

2VFB

4SS

1EN

5GND

6SW

7VBST

8VIN

9

[EP]GND

R231210K

R2309100

C2308100pF50V

DCDC_TI

+3.5V_ST

C235010uF10V

+3.3V_NORMAL

Q2302AO3407A

G

DS

C231922uF10V

R2336100K

C23560.1uF16V

C2315

4700pF

50V

C233310uF

16V

R23224.3K1%

IC2307

NCP803SN293

1

GND

3VCC 2 RESET

R2337100K

+12V

POWER_ON/OFF2_1

C23240.01uF50V

10uFC2327

10V

+12V

+12V

R233005%

PD_+3.5V

POWER_DETP2300

SMAW200-H18S1

14 12V

924V

4 PDIM#1

18 GND

1312V

8 GND

33.5V

17GND

12 GND

7GND

2 INV ON

16 24V

11GND

6 PDIM#2

1PWR ON

1512V

10 24V

53.5V

19

+1.1V_VDDL23072.2uH

NR5040T2R2N

C232222uF10V

+2.5V_Normal

POWER_ON/OFF1

R2318

5.6K

C2364100pF50V

DCDC_TI

C233422uF10V

IC2308

NCP803SN293

1

GND

3VCC 2 RESET

+12V

R2339

47K

1%

C23110.1uF50V

+1.5V_DDR

INV_CTL

L23124.7uH

2200pF

C2337

50V

L2318

L2301

IC2303TPS54821RHL

3GND_2

2GND_1

4PVIN_1

1RT/CLK

6VIN

5PVIN_2

7VSENSE

8COMP

9SS/TR

10EN

11PH_1

12PH_2

13BOOT

14PWRGD

15

[EP]GND

C2359

0.01uF50V

POWER_ON/OFF2_3

R23252.7K1%

PD_+12V

C232322uF10V

L2314

OLED

C23604700pF

50V

C23650.1uF16V

+5V_NORMAL

+3.3V_NORMAL

C231722uF10V

C23350.1uF

16V

R233810KOPT

C236222uF10V

C2302180pF50V

IC2305TPS54319TRE

DCDC_TI

1VIN_1

3GND_1

7COMP

9 SS/TR

10 PH_1

11 PH_2

12 PH_3

13

BOOT

14

PWRGD

15

EN

16

VIN_3

5AGND

8RT/CLK

6VSENSE

4GND_2

2VIN_2 17

EP[GND]

+3.5V_ST

+3.5V_ST

R231410K

+24V

PANEL_CTL

R2313

1.3K

+12V

L23203.3uH

NR5040T3R3N

D2300

40V

B540C

PANEL_VCC

+1.0V_VDD

RL_ON

C23060.1uF50V

R23261.2K1%

PD_+12V

C233022uF10V

POWER_ON/OFF2_2

C2320

47pF

50V

C23310.1uF50V

C2346

10uF

10V

+3.5V_ST

R2302

11K

1%

Q2300

MMBT3906(NXP)

1

2

3

R234451K

1%

C23134.7uF16V

+1.1V_VDD

C2358

0.1uF

16V

+3.5V_ST

R23212K1%

R234510K

R2317

33K

C2321

22000pF

50V

C23140.1uF

16V

R233415K

1/16W 5%+12V

R2316 1K

C23050.1uF16V

+3.3V_NORMAL

L2302BLM18PG121SN1D

3.3V_EMMC

C230022uF10V

C230910uF35V

IC2304RT8289GSP

3NC_2

2NC_1

4FB

1BOOT

5EN

6GND

7VIN

8SW

9

[EP]GND

C233922uF10V

L2305

BLM18PG121SN1D

R2308

51K

1% C23320.1uF

16V

+3.3V_NORMAL

R231110K

C2325100pF50V

OPT

IC2301

TPS54327DDAR

3VREG5

2VFB

4SS

1EN

5GND

6SW

7VBST

8VIN

9

[EP]GND

R2319

15K

1%

C230410uF16V

C23261uF10V

+12V

C23283300pF50V

C234022uF10V

POWER_ON/OFF1

L/DIM0_VS

L/DIM0_SCLK

L/DIM0_MOSIJP2308

JP2309

JP2310

L23093.6uH

SM-8040

IC2300-*1RT7266ZSP

DCDC_RT

3PVCC

2FB

4SS

1EN

5GND

6SW

7BOOT

8VIN

9

[EP]GND

IC2305-*1RT8079AGQW

DCDC_RT3GND_1

2VIN_2

4GND_2

1VIN_1

5

AGND

6

FB

7

COMP

8

RT/SYNC

9SS/TR

10SW_1

11SW_2

12SW_3

13

BOOT

14

PGOOD

15

EN

16

VIN_3

17

[EP]GND

ZD2301

5V

C234122uF10V

L2303

UBW2012-121F

L2304UBW2012-121F

L2306UBW2012-121F

L2313UBW2012-121F

R2303

16K

1/16W

1%

L23104.7uH

R2347

5.6K

LVDS_DISCHARGE

R2346

5.6K

LVDS_DISCHARGE

POWER_ON/OFF2_4R2348 0

R2307120K

1/16W1%

L/DIM0_MOSI

L/DIM0_VS

L/DIM0_SCLK

PANEL_20V

R23275.6K1%

R23281.3K1%

PANEL_20V

PWM_DIM

PWM_DIM2

ZD2300

2.5V

OPT

ZD2302

2.5V

OPT

ZD2303

2.5V

OPT

ZD2304

5V

24V-->3.48V

5A

12V-->3.58V

R1

not to RESET at 8kV ESD

R1

8AVout=0.765*(1+R1/R2)

+1.23V_CORE+1.0V_VDD

Vout=0.6*(1+R1/R2)

1.5A

LG1154AN : 3.3V->2.5V->1.0V

LG1154D : 3.3V->2.5V->1.5V->1.1V

Switching freq: 700K

R2

DDR MAIN 1.5V

eMMC POWER

5V/3.3V->2.5V->1.5V/1.1V->1.0V

Vout=0.827*(1+R1/R2)=1.521V

3A

POWER UP SEQUENCE

LG1154A

Vout=0.8*(1+R1/R2)

R2

3A

+2.5V

PANEL_POWER

R1

R1

Vout=1.222*(1+R1/R2)

3A

R2

+5.0V normal & USB

LG1154D

Vout(1.24V)=0.6*(1+16k/15k)

R2

20V-->3.51V

Power_DET

$ 0.145

R2

R1

ST_3.5V-->3.5V

BSD-NC4_H039-HD

Vout=0.765*(1+R1/R2)Switching freq: 700K

R1

3A

+3.3V_NORMAL

R2

OLED : 20V DET = POWER_ON/OFF2_4



2013.02.05

MICOM (RENESAS) 30

NetCast4.0

WOL/WIFI_POWER_ON

POWER_ON/OFF1

R3005

10K

MICOM_LCD/OLED

R3004

10K

MICOM_GP3_12/15PIN

I2C_SDA_MICOM

MODEL1_OPT_5

RUE003N02Q3001

HDMI_CEC_FET_ROHM

SD

G

+3.5V_ST

R3030

10K

R3014

10K

MICOM_DEBUG

+3.5V_ST

WOL_CTL

C3003

8pF

P300012507WS-04L

MICOM_DEBUG

1

2

3

4

5

SCART_MUTE

CAM_CTL

KEY1

MODEL1_OPT_5

CEC_REMOTER3012

10K

MICOM_NON_LOGO_LIGHT

POWER_ON/OFF2_4

C3001

0.47uF

SOC_TX

MODEL1_OPT_3

R3013

10K

MICOM_LOGO_LIGHT

R3008

10K

MICOM_TACT_KEY

EDID_WP

CAM_PWR_ON_CMD

LOGO_LIGHT

MODEL1_OPT_1

RL_ON

MODEL1_OPT_2

R3007-*2

22K

MICOM_OLED_FRC

SOC_RX

POWER_DET

R3007-*1

56K

MICOM_OLED_MAIN

R3001

10K

MICOM_M13

MHL_DET

MICOM_RESET

CAM_CTL

MODEL1_OPT_4

R3031

270K

OPT

R3010

10K

MICOM_TOUCH_KEY

R3021

10K

EDID_WP

LED_R

MODEL1_OPT_2

C30040.1uF16V

R3028

4.7MOPT

POWER_ON/OFF2_4

LED_R

R3007

10K

MICOM_PDP

POWER_ON/OFF2_1

LOGO_LIGHT

MICOM_DEBUG

I2C_SCL_MICOM

R3032

10K

R303327K

HDMI_CEC

MODEL1_OPT_1

X3000

32.768KHz

C3002

8pF

+3.5V_ST

PANEL_CTL

MODEL1_OPT_3

MHL_DET

C30000.1uF

POWER_ON/OFF2_2

AMP_MUTE

R3034

120K

KEY2

CAM_PWR_ON_CMD

IR

SCART_MUTE

D3000

BAT54_SUZHO

POWER_ON/OFF2_3

SI1012CR-T1-GE3Q3001-*1

HDMI_CEC_FET_VISHAYSD

G

SW3000JTP-1127WEM

MICOM_RESET_SW

12

4 3

R3002

10K

MICOM_GED

MODEL1_OPT_0

MICOM_DEBUG

MODEL1_OPT_4

R3029

22

MICOM_RESET_22OHM

INV_CTL

+3.5V_ST

SOC_RESET

MODEL1_OPT_0

MICOM_RESET

R3016

1K

+3.5V_ST

GND

SIDE_HP_MUTE

R3003

10K

MICOM_H13

HDMI_CEC

R3000

10K

MICOM_NON_GED

R3006

10K

MICOM_NC4_8PIN

R3029-*1 33MICOM_RESET_33OHM

ST_BY_DET_CAMST_BY_DET_CAM

+3.5V_ST

WOL/ETH_POWER_ON

IC3000

R5F100GEAFB

MICOM_LEAD_Au

1P60/SCLA0

2P61/SDAA0

3P62

4P63

5P31/TI03/TO03/INTP4

6P75/KR5/INTP9/SCK01/SCL01

7P74/KR4/INTP8/SI01/SDA01

8P73/KR3/SO01

9P72/KR2/SO21

10P71/KR1/SI21/SDA21

11P70/KR0/SCK21/SCL21

12P30/INTP3/RTC1HZ/SCK11/SCL11

13

P50/INTP1/SI11/SDA11

14

P51/INTP2/SO11

15

P17/TI02/TO02

16

P16/TI01/TO01/INTP5

17

P15/PCLBUZ1/SCK20/SCL20

18

P14/RXD2/SI20/SDA20

19

P13/TXD2/SO20

20

P12/SO00/TXD0/TOOLTXD

21

P11/SI00/RXD0/TOOLRXD/SDA00

22

P10/SCK00/SCL00

23

P146

24

P147/ANI18

25 P27/ANI726 P26/ANI627 P25/ANI528 P24/ANI429 P23/ANI330 P22/ANI231 P21/ANI1/AVREFM32 P20/ANI0/AVREFP33 P13034 P01/TO00/RXD135 P00/TI00/TXD136 P140/PCLBUZ0/INTP6

37

P120/ANI19

38

P41/TI07/TO07

39

P40/TOOL0

40

RESET

41

P124/XT2/EXCLKS

42

P123/XT1

43

P137/INTP0

44

P122/X2/EXCLK

45

P121/X1

46

REGC

47

VSS

48

VDD

IC3000-*1

R5F100GEAFB#30

MICOM_LEAD_Cu

1P60/SCLA0

2P61/SDAA0

3P62

4P63

5P31/TI03/TO03/INTP4

6P75/KR5/INTP9/SCK01/SCL01

7P74/KR4/INTP8/SI01/SDA01

8P73/KR3/SO01

9P72/KR2/SO21

10P71/KR1/SI21/SDA21

11P70/KR0/SCK21/SCL21

12P30/INTP3/RTC1HZ/SCK11/SCL11

13

P50/INTP1/SI11/SDA11

14

P51/INTP2/SO11

15

P17/TI02/TO02

16

P16/TI01/TO01/INTP5

17

P15/PCLBUZ1/SCK20/SCL20

18

P14/RXD2/SI20/SDA20

19

P13/TXD2/SO20

20

P12/SO00/TXD0/TOOLTXD

21

P11/SI00/RXD0/TOOLRXD/SDA00

22

P10/SCK00/SCL00

23

P146

24

P147/ANI18

25 P27/ANI726 P26/ANI627 P25/ANI528 P24/ANI429 P23/ANI330 P22/ANI231 P21/ANI1/AVREFM32 P20/ANI0/AVREFP33 P13034 P01/TO00/RXD135 P00/TI00/TXD136 P140/PCLBUZ0/INTP6

37

P120/ANI19

38

P41/TI07/TO07

39

P40/TOOL0

40

RESET

41

P124/XT2/EXCLKS

42

P123/XT1

43

P137/INTP0

44

P122/X2/EXCLK

45

P121/X1

46

REGC

47

VSS

48

VDD

EYE_SCL

EYE_SDA

R3035

3.3K

EYE_Q

R3036

3.3K

EYE_Q

+3.5V_ST

For CEC

HDMI_WAUP:HDMI_INIT

NON_GED

For Debug

Commercial

POWER_ON/OFF2_4

LCD / OLED

MICOM MODEL OPTION

Ready for sample set

PDP

0

H13

TACT_KEY

IR_wafer(12/15)

GP4 High/MID Power SEQUENCE

Ready for sample set

1

POWER_ON/OFF2_3

MODEL_OPT_3

M13MODEL_OPT_4

Renesas MICOM

POWER_ON/OFF!

MODEL_OPT_2

MODEL_OPT_0 For LOGO LIGHT

Need to Assign ADC port

MODEL_OPT_5

LOGO

SOC_RESET

POWER_ON/OFF2_2

GED

IR_wafer(10pin)

MODEL_OPT_1

Don’t remove R3014,not making float P40

MICOM MODEL OPTION

Ready For

NON LOGO

POWER_ON/OFF2_1

TOUCH_KEY


THERMAL

THERMAL


DDC_SDA_4

R3246

10K

CK+_HDMI1

C3214

1uF

D3202

A2

C

A1

HDMI_CLK+

DDC_SDA_2

D2+_HDMI1

+5V_NORMAL

R324010

D3207

5.6V

DDC_SCL_4

C32090.1uF16V

HDMI_S/W_RESET

D0+_HDMI4

VA3207ESD_HDMI

D0-_HDMI2

L3202

JK3202

51U019S-312HFN-E-R-B-LG

EAG62611204

HDMI_FREEPORT

14ARC

13

CE_REMOTE

5D1_GND

20

BODY_SHIELD

12

CK-

11

CK_GND

2D2_GND

19

HP_DET

18

5V

10CK+

4D1+

1D2+

17

GND

9D0-

8D0_GND

3D2-

16

DDC_DATA

7D0+

6D1-

15

DDC_CLK

VA3216ESD_HDMI

L3203

CK-_HDMI2

D1-_HDMI4

IC3201-*1SII9587CNUC-3

UD1R1XCN

2R1XCP

3R1X0N

4R1X0P

5R1X1N

6R1X1P

7R1X2N

8R1X2P

9AVDD12_1

10VDD12_1

11R3XCN

12R3XCP

13R3X0N

14R3X0P

15R3X1N

16R3X1P

17R3X2N

18R3X2P

19AVDD12_2

20VDD33_1

21R4XCN

22R4XCP

23

R4X0N

24

R4X0P

25

R4X1N

26

R4X1P

27

R4X2N

28

R4X2P

29

VDD12_2

30

DSDA0

31

DSCL0

32

CBUS_HPD0

33

R0PWR5V

34

DSDA1

35

DSCL1

36

CBUS_HPD1

37

R1PWR5V

38

DSDA3

39

DSCL3

40

CBUS_HPD3

41

R3PWR5V

42

DSDA4

43

DSCL4

44

CBUS_HPD4

45 R4PWR5V46 DSDA5[VGA]47 DSCL5[VGA]48 R5PWR5V[VGA]49 SBVCC550 PWRMUX_OUT51 LPSBV52 WKUP53 CD_SENSE054 CD_SENSE155 GPIO256 CD_SENSE357 CD-SENSE458 GPIO059 GPIO160 TPWR61 RESET_N62 CSDA63 CSCL64 INT65 SPDIF_IN66 RSVDL

67

VDD12_3

68

ARC

69

TX2P

70

TX2N

71

TX1P

72

TX1N

73

TX0P

74

TX0N

75

TXCP

76

TXCN

77

TCVDD12

78

TPVDD12

79

R0XCN

80

R0XCP

81

R0X0N

82

R0X0P

83

R0X1N

84

R0X1P

85

R0X2N

86

R0X2P

87

AVDD12_3

88

VDD33_2

89

[EP]GND

5V_HDMI_2

DDC_SDA_1

DDC_SDA_2

D3204

A2

C

A1

R3219

47K

D0-_HDMI4

DDC_SDA_3

DDC_SCL_4

C322210uF10V

C3213

1uF

+5V_NORMAL

R3237 33

C3220

1uF

R3228

47K

DDC_SDA_4

CEC_REMOTE

R3234

5.1K

5%

1/16W

MHL_DET

DDC_SCL_1

HDMI_RX0+

CK-_HDMI2

+5V_NORMAL

HDMI_INT

DDC_SDA_3

DDC_SCL_2

D2-_HDMI1

5V_HDMI_4

C32250.1uF

16V

R323110

C32060.1uF16V

VA3201

ESD_HDMI

CK+_HDMI4

JK3200


EAG62611204

HDMI_FREEPORT

14

NC

13

CE_REMOTE

5D1_GND

20

BODY_SHIELD

12

CK-

11

CK_GND

2D2_GND

19

HP_DET

18

5V

10CK+

4D1+

1D2+

17

GND

9D0-

8D0_GND

3D2-

16

DDC_DATA

7D0+

6D1-

15

DDC_CLK

R32415.1K

5%

1/16W

HDMI_RX2+

CK-_HDMI3

C3208

0.1uF

CK+_HDMI1

HDMI_HPD_1

HDMI_HPD_4

DDC_SCL_1

R3236 33

D0+_HDMI2

D2+_HDMI4

D2-_HDMI4

R321610

5V_HDMI_1

R324710K Q3201

MMBT3906(NXP) E

B

C

DDC_SCL_1

+3.5V_ST

C321810uF10V

D0-_HDMI1

SPDIF_OUT_ARC

VA3206ESD_HDMI

CK+_HDMI4

D1+_HDMI4

D2+_HDMI2

5V_HDMI_1

CK-_HDMI1

+5V_NORMAL

HDMI_RX0-

DDC_SCL_4

C32230.047uF25V

5V_HDMI_2

CEC_REMOTE

D2-_HDMI4

R321747K

R3212

1 1/16W

5%

C32070.1uF16V

+5V_NORMAL

5V_HDMI_4

C32021uF

10V

CK-_HDMI4

DDC_SCL_3

HDMI_HPD_1

5V_HDMI_4

VA3215ESD_HDMI

HDMI_HPD_2

5V_HDMI_3

Q3202AO3438

G

DS

D1+_HDMI4

VA3211ESD_HDMI

D0-_HDMI3

VA3210ESD_HDMI

DDC_SDA_4

MHL_DET

+5V_NORMAL

C32240.1uF16V

D0+_HDMI1

D2+_HDMI3

HDMI_HPD_2

+3.3V_NORMAL

DDC_SDA_2

+5V_NORMAL

CEC_REMOTE

R3206

220K

1/16W

5%

CK+_HDMI3

D1-_HDMI3

D0-_HDMI3

CK+_HDMI2

I2C_SDA5

D0-_HDMI1

IC3201SII9587CNUC

FHD

1R1XCN

2R1XCP

3R1X0N

4R1X0P

5R1X1N

6R1X1P

7R1X2N

8R1X2P

9AVDD12_1

10VDD12_1

11R3XCN

12R3XCP

13R3X0N

14R3X0P

15R3X1N

16R3X1P

17R3X2N

18R3X2P

19AVDD12_2

20VDD33_1

21R4XCN

22R4XCP

23

R4X0N

24

R4X0P

25

R4X1N

26

R4X1P

27

R4X2N

28

R4X2P

29

VDD12_2

30

DSDA0

31

DSCL0

32

CBUS_HPD0

33

R0PWR5V

34

DSDA1

35

DSCL1

36

CBUS_HPD1

37

R1PWR5V

38

DSDA3

39

DSCL3

40

CBUS_HPD3

41

R3PWR5V

42

DSDA4

43

DSCL4

44

CBUS_HPD4

45 R4PWR5V46 DSDA5[VGA]47 DSCL5[VGA]48 R5PWR5V[VGA]49 SBVCC550 PWRMUX_OUT51 LPSBV52 WKUP53 CD_SENSE054 CD_SENSE155 GPIO256 CD_SENSE357 CD-SENSE458 GPIO059 GPIO160 TPWR61 RESET_N62 CSDA63 CSCL64 INT65 SPDIF_IN66 RSVDL

67

VDD12_3

68

ARC

69

TX2P

70

TX2N

71

TX1P

72

TX1N

73

TX0P

74

TX0N

75

TXCP

76

TXCN

77

TCVDD12

78

TPVDD12

79

R0XCN

80

R0XCP

81

R0X0N

82

R0X0P

83

R0X1N

84

R0X1P

85

R0X2N

86

R0X2P

87

AVDD12_3

88

VDD33_2

89

[EP]GND

VA3214ESD_HDMI

R3204

10K

C32170.1uF16V

VA3203ESD_HDMI

R322647K

HDMI_CLK-

HDMI_RX1+

I2C_SCL5

IC3200

AZ1117BH-1.2TRE1

1

GND/ADJ

2 OUT3IN

CEC_REMOTE

D1+_HDMI3

HDMI_RX2-

D3203

A2

C

A1

C32110.1uF16V

CK-_HDMI1

C3212

1uF10V

D2-_HDMI3

5V_HDMI_2

R3214 33

D1-_HDMI1

D3206

30V

MBR230LSFT1G

Q3200

MMBT3904(NXP) E

B

C

5V_HDMI_3

C32260.1uF16V

OPT

D1-_HDMI1

R3220

47K

R3233

5.1K5%

1/16W

R323810

D2-_HDMI2

D0+_HDMI3

JK3203


EAG62611204

HDMI_FREEPORT

14

NC

13

CE_REMOTE

5D1_GND

20

BODY_SHIELD

GND

12

CK-

11

CK_GND

2D2_GND

19

HP_DET

18

5V

10CK+

4D1+

1D2+

17

GND

9D0-

8D0_GND

3D2-

16

DDC_DATA

7D0+

6D1-

15

DDC_CLK

DDC_SDA_1

5V_HDMI_3

D2+_HDMI3

D2+_HDMI4

D2-_HDMI1

+3.5V_ST

D0+_HDMI2

DDC_SCL_3

D1-_HDMI2

D3200

A2

C

A1

VA3204ESD_HDMI

R3249

3.9K

OPT

R3229

47K

DDC_SDA_1

D0+_HDMI3

CK-_HDMI4

VA3200

ESD_HDMI

C32100.1uF16V

D2+_HDMI1

D2-_HDMI2

D1+_HDMI2

VA3209ESD_HDMI

D1+_HDMI1

HDMI_HPD_3

D1+_HDMI1

5V_HDMI_4

DDC_SDA_3

R3211 33

D1+_HDMI3

C3219

1uF

C320110uF10V

R3225

47K

D1-_HDMI2

R323210

D3205

A2

C

A1

VA3213ESD_HDMI

D2+_HDMI2

R32135.1K

5%

1/16W

D1-_HDMI4

R3248

1K

OPT

R3244

10K

C32150.1uF16V

D0+_HDMI1

C320010uF10V

MHL_DET

5V_HDMI_1

+3.5V_ST

D0-_HDMI2

HDMI_HPD_3

D0+_HDMI4

R32431K

1/16W5%

CK+_HDMI3

R3202

10K

D3201

A2

C

A1

C320310uF10V

HDMI_HPD_4

D0-_HDMI4

+3.3V_NORMAL

DDC_SCL_2

D1+_HDMI2

R324510K

1/16W5%

R321847K

D2-_HDMI3

CK-_HDMI3

HDMI_RX1-

D1-_HDMI3

DDC_SCL_3

R32395.1K

5%

1/16W

DDC_SCL_2

JK3201


EAG62611204

HDMI_FREEPORT

14

NC

13

CE_REMOTE

5D1_GND

20

BODY_SHIELD

12

CK-

11

CK_GND

2D2_GND

19

HP_DET

18

5V

10CK+

4D1+

1D2+

17

GND

9D0-

8D0_GND

3D2-

16

DDC_DATA

7D0+

6D1-

15

DDC_CLK

CK+_HDMI2

C32040.1uF16V

R3250 33

R325133

R325233

R325333

IC3202TPS2051BDBVR

3OC

2GND

4EN

1OUT

5IN

C320510uF10V R

3215

100K

D3210RCLAMP0524PA

HDMI_ESD_SEMTEK

1

8

2

7

3

6

4

5

9

10

D3211RCLAMP0524PA

HDMI_ESD_SEMTEK

1

8

2

7

3

6

4

5

9

10

D3212RCLAMP0524PA

HDMI_ESD_SEMTEK

1

8

2

7

3

6

4

5

9

10

D3213RCLAMP0524PA

HDMI_ESD_SEMTEK

1

8

2

7

3

6

4

5

9

10

D3208RCLAMP0524PA

HDMI_ESD_SEMTEK

1

8

2

7

3

6

4

5

9

10

D3209RCLAMP0524PA

HDMI_ESD_SEMTEK

1

8

2

7

3

6

4

5

9

10

D3215RCLAMP0524PA

HDMI_ESD_SEMTEK

1

8

2

7

3

6

4

5

9

10

D3214RCLAMP0524PA

HDMI_ESD_SEMTEK

1

8

2

7

3

6

4

5

9

10

R3210 22

R3222 22

R3223 22

R3208 22

R3207 22

R3205 22

R3209 22

R3203 22

VA3205ESD_HDMI

VA3212ESD_HDMI

VA3202ESD_HDMI

VA3208ESD_HDMI

D3210-*1IP4283CZ10-TBA

HDMI_ESD_NXP

3GND_1

2TMDS_CH1+

4TMDS_CH2-

1TMDS_CH1-

5TMDS_CH2+

6NC_1

7NC_2

8GND_2

9NC_3

10NC_4

D3211-*1IP4283CZ10-TBA

HDMI_ESD_NXP

3GND_1

2TMDS_CH1+

4TMDS_CH2-

1TMDS_CH1-

5TMDS_CH2+

6NC_1

7NC_2

8GND_2

9NC_3

10NC_4

D3212-*1IP4283CZ10-TBA

HDMI_ESD_NXP

3GND_1

2TMDS_CH1+

4TMDS_CH2-

1TMDS_CH1-

5TMDS_CH2+

6NC_1

7NC_2

8GND_2

9NC_3

10NC_4

D3213-*1IP4283CZ10-TBA

HDMI_ESD_NXP

3GND_1

2TMDS_CH1+

4TMDS_CH2-

1TMDS_CH1-

5TMDS_CH2+

6NC_1

7NC_2

8GND_2

9NC_3

10NC_4

D3209-*1IP4283CZ10-TBA

HDMI_ESD_NXP

3GND_1

2TMDS_CH1+

4TMDS_CH2-

1TMDS_CH1-

5TMDS_CH2+

6NC_1

7NC_2

8GND_2

9NC_3

10NC_4

D3208-*1IP4283CZ10-TBA

HDMI_ESD_NXP

3GND_1

2TMDS_CH1+

4TMDS_CH2-

1TMDS_CH1-

5TMDS_CH2+

6NC_1

7NC_2

8GND_2

9NC_3

10NC_4

D3215-*1IP4283CZ10-TBA

HDMI_ESD_NXP

3GND_1

2TMDS_CH1+

4TMDS_CH2-

1TMDS_CH1-

5TMDS_CH2+

6NC_1

7NC_2

8GND_2

9NC_3

10NC_4

D3214-*1IP4283CZ10-TBA

HDMI_ESD_NXP

3GND_1

2TMDS_CH1+

4TMDS_CH2-

1TMDS_CH1-

5TMDS_CH2+

6NC_1

7NC_2

8GND_2

9NC_3

10NC_4

MHL_ON_OFF

R3254100

1/16W5%

OPT

JK3200-*1

DAADR019A

HDMI_FOOSUNG

14RESERVED

13CEC

5TMDS_DATA1_SHIELD

20

BODY_SHIELD

12TMDS_CLK-

11TMDS_CLK_SHIELD

2TMDS_DATA2_SHIELD

19HOT_PLUG_DETECT

18VDD[+5V]

10TMDS_CLK+

4TMDS_DATA1+

1TMDS_DATA2+

17DDC/CEC_GND

9TMDS_DATA0-

8TMDS_DATA0_SHIELD

3TMDS_DATA2-

16SDA

7TMDS_DATA0+

6TMDS_DATA1-

15SCL

JK3201-*1

DAADR019A

HDMI_FOOSUNG

14RESERVED

13CEC

5TMDS_DATA1_SHIELD

20

BODY_SHIELD

12TMDS_CLK-

11TMDS_CLK_SHIELD

2TMDS_DATA2_SHIELD

19HOT_PLUG_DETECT

18VDD[+5V]

10TMDS_CLK+

4TMDS_DATA1+

1TMDS_DATA2+

17DDC/CEC_GND

9TMDS_DATA0-

8TMDS_DATA0_SHIELD

3TMDS_DATA2-

16SDA

7TMDS_DATA0+

6TMDS_DATA1-

15SCL

JK3202-*1

DAADR019A

HDMI_FOOSUNG

14RESERVED

13CEC

5TMDS_DATA1_SHIELD

20

BODY_SHIELD

12TMDS_CLK-

11TMDS_CLK_SHIELD

2TMDS_DATA2_SHIELD

19HOT_PLUG_DETECT

18VDD[+5V]

10TMDS_CLK+

4TMDS_DATA1+

1TMDS_DATA2+

17DDC/CEC_GND

9TMDS_DATA0-

8TMDS_DATA0_SHIELD

3TMDS_DATA2-

16SDA

7TMDS_DATA0+

6TMDS_DATA1-

15SCL

JK3203-*1

DAADR019A

HDMI_FOOSUNG

14RESERVED

13CEC

5TMDS_DATA1_SHIELD

20

BODY_SHIELD

12TMDS_CLK-

11TMDS_CLK_SHIELD

2TMDS_DATA2_SHIELD

19HOT_PLUG_DETECT

18VDD[+5V]

10TMDS_CLK+

4TMDS_DATA1+

1TMDS_DATA2+

17DDC/CEC_GND

9TMDS_DATA0-

8TMDS_DATA0_SHIELD

3TMDS_DATA2-

16SDA

7TMDS_DATA0+

6TMDS_DATA1-

15SCL

HDMI 32

GP4

HDMI2

HDMI S/W OUTPUT

HDMI3

HDMI1 With ARC

HDMI1

HDMI2

ARC

Device Address : 0XB0

HDMI4

HDMI3

HDMI4 With MHL

Vout=0.8*(1+R1/R2)


Fiber Optic


JK3402-*1KJA-PH-1-0177-1

JACK_KSD

EAG61030006

3 M3_DETECT

4 M4

5 M5_GND

1 M1

6 M6

JK3401JSTIB15

CGND

BVCC

AVIN

4

SHIELD

R340033

+3.3V_NORMAL

HP_LOUT

+3.3V_NORMAL

R3403330K

COMP1_DET

HP_DET

COMP1/AV1/DVI_R_IN

R3409100

1/16W5%

HP_OUT

C340118pF

OPT

C340247pF50V

C34000.1uF16V

R3406

10KHP_OUT

JK3403-*1KJA-PH-0-0177

JACK_KSD

EAG61030001

3DETECT

4L

5GND

1R

SOC_RX

R3404150

1/10W5%

VA34005.5V

ADUC 5S 02 0R5L

OPT

P3400

12507WS-04L

1

2

3

4

5

VA34025.6V

R3405150

1/10W5%

R3408100

1/16W5%

R3407100

1/16W5%

AV1_CVBS_IN

VA34035.6V

VA34045.6V

JK3400PEJ038-4G6

JACK_PARK

EAG61030012

3 M3_DETECT

4 M4

5 M5_GND

1 M1

6 M6

SPDIF_OUT

JK3403

PEJ038-3B6

EAG61030009

JACK_PARK

3DETECT

4L

5GND

1R

COMP1_Y

VA34055.6V

JK3400-*1KJA-PH-1-0177-2

JACK_KSD

EAG61030007

3 M3_DETECT

4 M4

5 M5_GND

1 M1

6 M6

COMP1/AV1/DVI_L_IN

JK3402PEJ038-4Y6

JACK_PARK

EAG61030011

3 M3_DETECT

4 M4

5 M5_GND

1 M1

6 M6

R340210K

SOC_TX

VA34015.6V

+3.3V_NORMAL

+3.3V_NORMAL

AV1_CVBS_DET

+3.5V_ST

COMP1_Pb

HP_ROUT

C34030.1uF16V

COMP1_Pr

R340110K

JACK HIGH/MID 2012.10.09

BSD-NC4_H034-HD

CVBS 1 PHONE JACK

SPDIF OUT

COMPONENT 1 PHONE JACK

for audio Hum noise (L)



2013.02.22

NON_EPI(OLED) 36

NC4_H13

I2C_SCL2

VCOM_DYN

EO_SOC

EPI_LOCK6

GCLK_SOCGST_SOC

I2C_SDA2PMIC_RESET

MCLK_SOC

MDS62110209


MDS62110209


EA98

MDS62110209


BSD-NC4_H036-HD

SMD TOP for EMI



2013.02.25

IR/KEY_OLED

NC4_H13

40

M_REMOTE_RTS

C40111000pF

50V

C40121000pF50V

VA40025.6V

AMOTECH CO., LTD.

NON_OLED

C40010.1uF

VA4003

ADMC 5M 02 200L OPT

IR

L4002

120-ohm

C400847pF50V

C40051000pF50V

C40165pF50V

LOGO_LIGHT_WAFER

R400810K5%

OLED_EYE_SCL

+3.3V_NORMAL

KEY2

OLED_EYE_SCL

+3.5V_ST

R4006100

R4003 33LOGO_LIGHT

C400947pF50V

IR

Q4000

MMBT3904(NXP)

LOGO_LIGHT

E

B

C

+3.5V_WOL

P4003SMAW200-H18S1

14 +3.5V_ST

9WOL

4 RST

18 EYE_SDA

13NC

8 TX

3USB_DM

17EYE_SCL

12 CTS

7GND

2 3.3V

16 GND

11GND

6 RX

1+3.5V_WOL

15IR

10 RESET

5USB_DP

19 GND

KEY1

EYE_SCL

M_REMOTE_TX

M_REMOTE_CTS

+3.5V_ST

C4006100pF50V

NON_OLED

VA40005.6V

AMOTECH CO., LTD.

L4003BLM18PG121SN1D

R40021K

LOGO_LIGHT

R4001

10K

LOGO_LIGHT

OLED_EYE_SDA

+3.5V_ST

P400212507WR-08L

IR_WAFER_8P

1KEY2

2+3.5V_ST

3GND

4LOGO

5IR

6GND

7EYE_SCL

8EYE_SDA

9

GND

WOL/WIFI_POWER_ON

R401322

EYE_SDA

WIFI_DP

C4007

0.1uF

R4012100

C4004

22uF

10V

LOGO_LIGHT_WAFER

R400910K5%

C4010100pF50VOPT

+3.5V_ST

LOGO_LIGHT

WIFI_DM

M_RFModule_RESET

+3.5V_ST

+3.3V_NORMAL

VA40055.6VAMOTECH CO., LTD.OPT

L4001BLM18PG121SN1D

R4007100R

4000

10K

OPT

C401347pF50V

OPT

VA4004ADMC 5M 02 200L OPT

AR40001001/16W

OLED_EYE_SDA

C40020.1uF

R4014

10K

C40155pF50V

R4011100

R400510K5%

R4010100

VA40015.6VAMOTECH CO., LTD.

M_REMOTE_RX

C401447pF50V

OPT

L4000

BLM18PG121SN1D120-ohm

R4004 33LOGO_LIGHT

C40000.1uF16V

LOGO_LIGHT

BSD-NC4_H037-HD

For EMI

MAX 0.4A

Place Near Micom

For EMI


THERMAL


2012.03.04

USB_HUB 42

NC4_H13

R420822K

CAMERA_NON_OLED

R42073.3K

CAMERA_NON_OLED

R42020NON_CAMERA

C4206

0.1uFCAMERA

C42024.7uF

CAMERA

C421233pF50V

CAMERA

R42092.2KCAMERA_NON_OLED

+3.3V_NORMAL

R421333

CAMERA

C4200

1uF25V

CAMERA

Q4201PMV48XP

CAMERA_NON_OLED

G

DS

+3.5V_CAM

USB_CAMERA_DP

R4215100KCAMERA

R42060 CAMERA

AUD_SCK

USB_DP3

Q4200MMBT3904(NXP)CAMERA_NON_OLED

E

B

C

R42000NON_CAMERA

C42104.7uF10V

CAMERA_NON_OLED

USB2_HUB_IC_IN_DP

R4220

10KCAMERA

+3.5V_CAM

R42010

NON_CAMERA

USB_CAMERA_DM

CAM_PWR_ON_CMD

USB_DP3

L4200

BLM18PG121SN1D

CAMERA

120-ohm

USB2_HUB_IC_IN_DM

R42030

NON_CAMERA

C4209

0.1uFCAMERA

C4205

0.1uFCAMERA

C4203

0.1uF

CAMERA

R4214

680

1%CAMERA

C4208

0.1uF

CAMERA

+3.3V_NORMAL

USB2_HUB_IC_IN_DP

USB_CAMERA_DM

R42040CAMERA

CAM_SLIDE_DET

C421133pF50V

CAMERA

R421133 CAMERA

+3.3V_NORMAL

+3.5V_ST

/RST_HUB

USB_CAMERA_DP

CAM_CTL

R421233 CAMERA

R4219

10K

OPT

USB2_HUB_IC_IN_DM

C421433pF50V

CAMERA

R42050 CAMERA

USB_DM3

R4218

10K

AUD_LRCK

R4217

10K

1/16W

5%

CAMERA

R4216

100KCAMERA

USB_DM3

R42100 CAMERA

C4201

0.1uFCAMERA

AUD_LRCH

P4200

12507WR-12L

CAMERA

1

2

3

4

5

6

7

8

9

10

11

12

13

ST_BY_DET_CAM

+5V_NORMAL

C42134.7uF10V

CAMERA

C421533pF50V

OPT

C4204

22pF

CAMERA

C4207

22pF

CAMERA

X420012MHZ

CAMERA

4GND_2

1X-TAL_1

2GND_1

3X-TAL_2

IC4200GL852G-31

CAMERA

1DM0

3DM1

7DP2

9AVDD_2

10

X1

11

X2

12

DM3

13

DP3

14

AVDD_3

15 DM4

16 DP4

17 RESET

18 TEST/SCL

19 OVCUR4

20 OVCUR3

21 DVDD

22

PSELF

23

PGANG

24

OVCUR2

25

OVCUR1

26

SDA

27

V5

28

V33

5AVDD_1

8RREF

6DM2

4DP1

2DP0 29

[EP]GND

L4201UBW2012-121F

OLED

D4200

RCLAMP0502BA

OPT

ZD4200

5V

OPT

VA4200

CAMERA VA4201

CAMERA

USB_Camera

CAMERA POWER ENABLE CONTROL

From HUB

BSD-NC4_H042-HD


USB DOWN STREAM

USB DOWN STREAM

THERMAL


USB_CTL1

/USB_OCD1

USB3_DMR4501

10K

USB3_TX0M

+3.3V_NORMAL

+5V_USB_1

+5V_NORMAL

R450010KOPT

IC4500BD82020FVJ

3IN_2

2IN_1

4EN

1GND

5OC

6OUT_1

7OUT_2

8OUT_3

C4501

10uF

10V

C4400

10uF

10V

+5V_USB_1

D4401

RCLAMP0502BA

USB3_RX0P

D4402

RCLAMP0502BA

USB3_RX0M

D4400

RCLAMP0502BA

C45000.1uF16V

USB3_DP

USB3_TX0P

+5V_USB_2

+5V_NORMAL

/USB_OCD2USB_CTL2

R4302

10K

USB_CTL3

C43020.1uF16V

+3.3V_NORMAL

+5V_USB_3/USB_OCD3

R4301

10K

C433710uF10V

C430110uF10V

USB_DM2

D4300

RCLAMP0502BA

+5V_USB_2

USB_DP3

+5V_USB_3

JK43003AU04S-305-ZC-(LG)

12

34

5

USB_DM3

USB_DP2

D4302

RCLAMP0502BA

C4322

10uF

10V

C4310

10uF

10V

JK43023AU04S-305-ZC-(LG)

12

34

5

IC4306TPS2066CDGNR

3EN1

2IN

4EN2

1GND

5FLT2

6OUT2

7OUT1

8FLT1

9

[EP]GND

JK4400

SJ113262

1VBUS

2D-

3D+

4GND

5STDA_SSRX-

6STDA_SSRX+

7GND_DRAIN

8STDA_SSTX-

9STDA_SSTX+

10

SHIELD

OCP USB1

OCP USB2/3 USB2 (2.0)

MAX 1.0AUSB3 (2.0)

MAX 1.0A

USB1 (3.0)MAX 1.2A

BSD-NC4_H044-HD

2012-11-09

USB JACK



VA48085.5VOPT

C4801

1000pF50V

EU

VA4804

5.5V

EU

SC_G

VA4800

20V

EU

VA48035.5V

EU

VA4805

5.5V

EU

DTV/MNT_V_OUT

SC_CVBS_IN

+3.3V_NORMAL

JK4800

DA1R018H91E

EU

1

AUDIO_R_OUT2

AUDIO_R_IN3

AUDIO_L_OUT4

AUDIO_GND5

B_GND6

AUDIO_L_IN7

B_OUT8

ID9

G_GND10

G_OUT11

R_GND12

R_OUT13

RGB_IO14

SYNC_GND15

SYNC_OUT16

SYNC_IN17

COM_GND18

AV_DET19

SHIELD

C48034700pF

EU

SC_FBVA48025.6VEU

L4801

BLM18PG121SN1D

EU

SC_B

SC_R

C48040.1uF

EU

SC_ID

SC_R_IN

R480110K

EU

VA48065.6V

EU

VA48095.6VEU

SC_L_IN

C48024700pF

EU

SC_DET

VA48015.6V

EU

DTV/MNT_R_OUT

C4800

1000pF50V

EU

L4800

BLM18PG121SN1D

EU

VA48075.5VEU

DTV/MNT_L_OUT

R480075

EU

R4802100

1/16W5%

EU

SCART GENDER

2012.10.31

CLOSE TO JUNCTIONFull Scart(18 Pin Gender)

BSD-NC4_H048-HD



VA5102

5.5V

JK5100

XRJH-01A-4-DA7-180-LG(B)

LAN_XML

1P1[CT]

2P2[TD+]

3P3[TD-]

4P4[RD+]

5P5[RD-]

6P6[CT]

7P7

8P8

12

SHIELD

9P9

11P11

10P10[GND]

D1YL_C

D2YL_A

D3GN_C

D4GN_A

EPHY_RDP

LAN_JACK_POWER

VA5100

5.5V

C51000.1uF16V

EPHY_TDN

JK5100-*1

TLA-6T764

LAN_TDK

1R1

2R2

3R3

4R4

5R5

6R6

7R7

8R8

12

SHIELD

9R9

11R11

10R10[GND]

D1YL_C

D2YL_A

D3GN_C

D4GN_A

C51030.01uF50V

EPHY_TDP

VA5103

5.5V

C51010.01uF50V

C51020.1uF16V

VA5101

5.5V

EPHY_RDN

50

LAN_VERTICAL 2011.12.09

Ethernet Block


THERMAL


EPHY_TXD1

R5215

3.3K

EPHY_TDN

+3.3V_WOL

C52080.1uF16V

EPHY_MDIO

EPHY_MDC

EPHY_EN

C520720pF

50V

ET_RXER

R52173.3K

+3.3V_WOL

R5200

3.3K

ET_RXER

+3.5V_WOL

WOL_CTL

C52110.1uF16V

EPHY_RXD1

ET_COL/SNI

R43182.2K

EPHY_ACTIVITY

R5207

33

R5210

33

EPHY_INT

R43163.3K

ET_COL/SNI

+3.5V_WOL

C520620pF50V

WOL/ETH_POWER_ON

+3.3V_WOL

EPHY_ACTIVITY

EPHY_RXD0

C52010.1uF16V

R5203

3.3K

+3.3V_WOL

EPHY_TXD0

R5208

3.3K

LAN_JACK_POWER

Q4301PMV48XP

G

DS

C52050.1uF16V

/RST_PHY

EPHY_REFCLK

R5201

33

OPT

R431722K

R5205

3.3K

L5200

BLM18PG121SN1D

120-ohm

+3.3V_WOL

EPHY_CRS_DV

+3.3V_WOL

R5202

1M

OPT

R5206

33

+3.5V_ST

Q4300MMBT3904(NXP)

E

B

C

C43254.7uF10V

R5212

1.5K

1/16W

1%

R52042.49K 1%

EPHY_RDP

C5212

0.1uFOPT

EPHY_RDN

EPHY_TDPIC5200

RTL8201F-VB-CG

1RSET

3MDI+[0]

7AVDD33_1

9RXD[0]

10

RXD[1]

11

RXD[2]/INTB

12

RXD[3]/CLK_CTL

13

RXC

14

DVDD33

15

TXC

16

TXD[0]

17 TXD[1]

18 TXD[2]

19 TXD[3]

20 TXEN

21 PHYRSTB

22 MDC

23 MDIO

24 LED0/PHYAD[0]/PMEB

25

LED1/PHYAD[1]

26

CRS/CRS_DV

27

COL

28

RXER/FXEN

29

DVDD10OUT

30

AVDD33_2

31

CKXTAL1

32

CKXTAL2

5MDI+[1]

8RXDV

6MDI-[1]

4MDI-[0]

2AVDD10OUT 33

[EP]

C52030.1uF16V

+3.3V_WOL

R5209

51

C5202

5pF

R5218

0

C5209

33pF

X5200

25MHz

4GND_2

1X-TAL_1

2GND_1

3X-TAL_2

R5219

10K

1/16W

5%

R522033

R522133OPT

EDID_WP

C52004.7uF10V

ETHERNET

WOL POWER ENABLE CONTROL

Place this cap. near IC

Ethernet Block

Route Single 50 Ohm, Differential 100 Ohm

Place this cap. near IC

Place 0.1uF close to each power pins

Place this Res. near IC

Place near IC

BSD-NC4_H052-HD

2012-09-12

(from SOC)

(PHY reset from MICOM)


THERMAL


+24V_AMP

I2C_SCL1

C5628330pF50V

AUD_MASTER_CLK

WOOFER_MUTE

AUD_SCK

AMP_RESET_N

+24V_AMP

P5600

WAFER-ANGLE

1

2

3

4

C56070.1uF

R560110K

R5609

470

C5627330pF50V

+3.3V_NORMAL

L5602

BLM18PG121SN1D

I2C_SDA1

C56362200pF

50V

R5614

18

1/16W

+24V

R5607

18K

1%

C5611

4700pF

AUD_LRCH

AUD_LRCK

C5617 0.033uF50V

R561118

R5613

18

1/16W

R5600

10K

C56010.1uF50V

SPK_R+

R561218

33 R5605

C560310uF10V

C5626330pF50V

AMP_MUTE

C5609 4700pF

R560433

C56330.1uF50V

C56180.1uF50V

C56392200pF50V

SPK_R-

SPK_L+

L5601

BLM18PG121SN1D

C5613

2200pF

50V

C56300.47uF50V

R5608 15K

C5608

0.047uF

C56350.1uF50V

C56320.1uF50V

C56340.1uF50V

C56060.1uF16V

C56151uF25V

C5625

0.033uF50V

SPK_L-

SPK_L-

C56190.1uF50V

C5612

0.047uF

C56100.1uF16V

C5629330pF50V

R5610

470

+3.3V_NORMAL

R560633 +24V_AMP

WOOFER_MUTE

C5616

0.033uF

50V

C56372200pF50V

IC5600

TAS5733

1OUT_A

2PVDD_AB_1

3PVDD_AB_2

4BST_A

5NC_1

6SSTIMER

7NC_2

8PBTL

9AVSS

10

PLL_FLTM

11

PLL_FLTP

12

VR_ANA

13AVDD

14A_SEL_FAULT

15MCLK

16OSC_RES

17DVSSO

18VR_DIG

19PDN

20LRCLK

21SCLK

22SDIN

23SDA

24SCL

25

RESET

26

STEST

27

DVDD

28

DVSS

29

GND

30

AGND

31

VREG

32

GVDD_OUT

33

BST_D

34

PVDD_CD_1

35

PVDD_CD_2

36

OUT_D

37 PGND_CD_138 PGND_CD_239 OUT_C40 NC_341 NC_442 BST_C43 BST_B44 NC_545 NC_646 OUT_B47 PGND_AB_148 PGND_AB_2

49

[EP]

C56140.1uF

+3.3V_NORMAL

SPK_L+

C56382200pF

50V

SPK_R-

R5603

100 C56021000pF

50V

SPK_R+

C56240.033uF50V

R56020

Q5600MMBT3904(NXP)

E

B

C

C56040.1uF16V

C56310.47uF50V

C562010uF35V

C562310uF35V

C562210uF35V

C562110uF35V

L5600UBW2012-121F

L5605NRS6045T100MMGK

10.0uH

L5603

NRS6045T100MMGK10.0uH

L5606

NRS6045T100MMGK10.0uH

L5604

NRS6045T100MMGK

10.0uHC56054.7uF10V

ZD5601

5V

OPT

GP4_MT5369

58

2011.11.21

AUDIO[ST]

Close to Speaker

Separate DGND AND AVSS

SPEAKER_L

This parts are Located on AVSS area.

SPEAKER_R


THERMAL


2013.02.01

TI_AMP_FILM_SPK 57

NC4_H13

C5711

4700pF

FILM_SPK

C57320.1uF50V

FILM_SPK

SPK_WOOFER_L+

C5725

0.033uF50V

FILM_SPK

C5728330pF50V

FILM_SPK

C57300.47uF50V

FILM_SPK

C57330.1uF50V

FILM_SPK

C5712

0.047uF

FILM_SPK

I2C_SDA1

C57070.1uF

FILM_SPK

R570233FILM_SPK

R5707

470

FILM_SPK

R5701

100

FILM_SPK

AUD_SCK

R5708

470

FILM_SPK

C5729330pF50V

FILM_SPK

R57000

FILM_SPK

C57190.1uF50V

FILM_SPK

SPK_WOOFER_R+

R5712

18

1/16W

FILM_SPK

SPK_WOOFER_R+

R571318

FILM_SPK

C5708

0.047uF

FILM_SPK

AMP_RESET_N

C5726330pF50V

FILM_SPK

R571418FILM_SPK

C57021000pF

50V

FILM_SPK

+24V_AMP_WOOFER

C5716

0.033uF

50V

FILM_SPK

+3.3V_NORMAL

+24V

AUD_MASTER_CLK

I2C_SCL1

+24V_AMP_WOOFER

R5711

18

1/16W

FILM_SPK

C5717 0.033uF50V

FILM_SPK

C57372200pF50V

FILM_SPK

L5702

BLM18PG121SN1D

FILM_SPK

R570433 FILM_SPK

C5727330pF50V

FILM_SPK

C57350.1uF50V

FILM_SPK

R5705

18K

1%FILM_SPK

C57040.1uF16V

FILM_SPK

R5709

10K

OPT

C57310.47uF50V

FILM_SPK

SPK_WOOFER_L+

C57180.1uF50V

FILM_SPK

+24V_AMP_WOOFER

WOOFER_MUTE

C57100.1uF16V

WOOFER

SPK_WOOFER_L-

C57392200pF50V

FILM_SPK

C57060.1uF16V

FILM_SPK

C57362200pF

50V

FILM_SPK

C57240.033uF50V

FILM_SPK

C570310uF10V

FILM_SPK

C57382200pF

50V

FILM_SPK

R5710

10K

OPT

C57010.1uF50V

FILM_SPK

C57151uF25V

FILM_SPK

C57340.1uF50V

FILM_SPK

C57140.1uF

FILM_SPK

IC5700

TAS5733

WOOFER

1OUT_A

2PVDD_AB_1

3PVDD_AB_2

4BST_A

5NC_1

6SSTIMER

7NC_2

8PBTL

9AVSS

10

PLL_FLTM

11

PLL_FLTP

12

VR_ANA

13AVDD

14A_SEL_FAULT

15MCLK

16OSC_RES

17DVSSO

18VR_DIG

19PDN

20LRCLK

21SCLK

22SDIN

23SDA

24SCL

25

RESET

26

STEST

27

DVDD

28

DVSS

29

GND

30

AGND

31

VREG

32

GVDD_OUT

33

BST_D

34

PVDD_CD_1

35

PVDD_CD_2

36

OUT_D

37 PGND_CD_138 PGND_CD_239 OUT_C40 NC_341 NC_442 BST_C43 BST_B44 NC_545 NC_646 OUT_B47 PGND_AB_148 PGND_AB_2

49

[EP]

33 R5703FILM_SPK

GND-4

GND-4

R5706 15K

FILM_SPK

L5701

BLM18PG121SN1D

FILM_SPK

AUD_LRCH

SPK_WOOFER_R-

C5713

2200pF

50V

FILM_SPK

C5709 4700pFFILM_SPK

AUD_LRCK

SPK_WOOFER_R-

SPK_WOOFER_L-

+3.3V_NORMAL C572310uF35V

FILM_SPK

C572210uF35V

FILM_SPK

C572110uF35V

FILM_SPK

C572010uF35V

FILM_SPK

L5700UBW2012-121F

OPT


FILM_SPK

10.0uH

L5706

NRS6045T100MMGK

FILM_SPK

10.0uH


FILM_SPK

10.0uH

L5705

NRS6045T100MMGK

FILM_SPK

10.0uH

C5705

4.7uF10V

FILM_SPK

+12V

L5707UBW2012-121F

FILM_SPK

P5700

FILM_SPK

WAFER-ANGLE

1

2

3

4

ZD5701

5V

OPT

This parts are Located on AVSS area.

WOOFER_R

Close to Speaker

Separate DGND AND AVSS

WOOFER_L

BSD-NC4_H038-HD



SIGN600002

C6004

0.1uF

50V

EU

DTV/MNT_R_OUT

C6008

1uF

25V

EU

SCART_Lout

R6008 33KEU

C600533pF

EU

SCART_MUTE

C600333pFEU

DTV/MNT_L_OUT

DTV/MNT_L_OUT

R6002

470K

OPT

Q6000MMBT3904(NXP)

EUE

B

C

R60002.2KEU

+12V

C6007

6800pF

OPT

SCART_AMP_L_FB

R6010

470K

OPT

C6000

1uF25VEU

R600433KEU

DTV/MNT_R_OUT

C6002

6800pF

OPT

Q6001MMBT3904(NXP)

EUE

B

C

L6000

EU

SCART_Rout

SCART_AMP_R_FB

IC6000AZ4580MTR-E1

EU3

IN1+

2IN1-

4VEE

1OUT1

5 IN2+

6 IN2-

7 OUT2

8 VCC

R60112.2K

EU

Q6002RT1P141C-T112

EU_SCART_MUTE_ISAHAYA

E

B

C

R60141K

EU

R60131K

EU

Q6002-*1PDTA114ET

EU_SCART_MUTE_NXP

E

B

C

60

SCART AUDIO AMP 2011.11.21

[SCART AUDIO MUTE]

AUD_OUT >> EU/CHINA_HOTEL_OPT



R610010K

HP_OUTC61011uF10VHP_OUT

C61001uF10VHP_OUT

+3.3V_NORMAL

C61051uF10V

HP_OUT

R610110K

HP_OUT

HP_LOUT_AMP

HP_LOUT_MAIN

SIDE_HP_MUTE

+3.3V_NORMAL

R610443K

1%

HP_OUT

R610333K

HP_OUT_MTK

C61021uF10V

HP_OUT

R61054.7K

HP_OUT

C61031uF10V

HP_OUT

HP_ROUT_MAIN

L6100120-ohm

HP_OUT

BLM18PG121SN1D

C6104

180pF

HP_OUT_MTK

R610643K

1%

HP_OUT

C61070.1uF16V

HP_OUT

C6109180pF

HP_OUT_MTK

R6102

33KHP_OUT_MTK

HP_ROUT_AMP

C6104-*1

18pF

HP_OUT_H13C6109-*118pF

HP_OUT_H13

C610810pF50V

HP_OUT

C610610pF50V

HP_OUT

IC6100TPA6138A2

3OUTR

2-INR

4GND_1

1+INR

6VSS

5MUTE

7CN

8CP

9VDD

10GND_2

11UVP

12OUTL

13-INL

14+INL

R6103-*143K

1%

HP_OUT_H13 R6102-*143K

1%

HP_OUT_H13

2011.09.29HEADPHONE AMP

61

EARPHONE AMP



+5V_CI_ON+5V_NORMAL

R6217100

CI

C62101uF25VCI

R621810K

CI

PCM_5V_CTL

IC6200AP2151WG-7

CI

3FLG

2GND

4EN

1OUT

5IN

R621910K

CI

62

CI SLOT 2011.10.31

CI POWER ENABLE CONTROL



SIGN630028

P6300

10057542-1311FLF(B CAS Slot)

JAPAN

C1VCC

C2RST

C3CLK

C4RESERVED_1

C5GND

C6VPP

C7I/O

C8RESERVED

S1SW1

S2SW2

C6301

10uF10V

JAPAN

R6301

2.7K

JAPAN

ZD63005V

JAPAN

SMARTCARD_VCC/SD_EMMC_CMD

R6302

OPT

R6310 22JAPAN

C63040.1uF

16V

JAPAN

+3.3V_NORMAL

SMARTCARD_PWR_SEL/SD_EMMC_DATA[1]

R6315

1.2K

JAPAN

SMARTCARD_RST/SD_EMMC_DATA[2]

R6316

1.2K

JAPAN

R6300 22

JAPAN

R6305

2.7K

JAPAN

IC6300TDA8024TT

JAPAN

35V/3V

2CLKDIV2

4PGND

1CLKDIV1

6VDDP

5S2

7S1

8VUP

9PRES

10PRES

11I/O

12AUX2

13AUX1

14CGND

15CLK

16RST

17VCC

18PORADJ

19CMDVCC

20RSTIN

21VDD

22GND

23OFF

24XTAL1

25XTAL2

26I/OUC

27AUX1UC

28AUX2UC

R6309 22JAPAN

+3.3V_NORMAL

C63000.1uF

16V

JAPAN C63030.1uF

16V

JAPAN

L6300

BLM18PG121SN1D

JAPAN

R6312

10K

JAPAN

R6311 22JAPAN

SMARTCARD_DATA/SD_EMMC_CLK

C63070.33uF16V

JAPAN

+5V_NORMAL

R6303

OPT

+3.3V_NORMAL

+3.3V_NORMAL

R6304

2.7K

JAPAN

R6306

OPT

R63141K

JAPAN

C63060.1uF16V

JAPAN

R6308 22JAPAN

SMARTCARD_DET/SD_EMMC_DATA[3]

L6301

BLM18PG121SN1D

JAPAN

R6307 22JAPAN

C63020.1uF

16V

JAPAN

R631375

JAPAN

ZD63015V

JAPAN

SMARTCARD_CLK/SD_EMMC_DATA[0]

C63050.1uF16V

JAPAN

R6317

1.2K

JAPAN

R6318

1.2K

OPT

R6319

1.2K

OPT

CI SLOT 2011.04.17

62

Place CLK C3 far from C2,C7,C4 and C8

75 ohm in I/O is for short circuit Protection

B-CAS SLOT

INT CMDVCC : STATUS--------------------------------- HIGH HIGH CARD PRESENT LOW HIGH CARD not PRESENT

CLKDIV1 CLKDIV2 : F_CRD_CLK----------------------------- 1 0 CLKIN

B-CAS (SMART CARD) INTERFACE


THERMAL










RF_SWITCH_CTL_TU

+1.23V_D_Demod

C65150.1uF

TU_Q/W

/TU_RESET2

/S2_RESET

C65420.1uF

I2C_SCL6_TU

+1.23V_D_Demod

C652922uF10V85C

+3.3V_TU

R6508100

TU_S/N/Q/W

R65154.7K

OPT

C65500.1uF16V

TU_W_BR/TW/CO/JP/_Q_AU

R652720K1%

TU_Q/N/M/W

I2C_SDA6_TU

IF_P

R6521200

TU_A_GLOBAL_6/7

Q6500MMBT3906(NXP)

OPT

E

B

C

I2C_SDA4_TU

C6522

0.1uF 16V

OPT

C6554100pF50V

+1.8V_TU

Power_D_Demod_TU

TUNER_SIF_TU

L6503BLM18PG121SN1D

IF_AGC_TU

+3.3V_TU+1.8V_TU

LNB_TX


/TU_RESET1

TUNER_SIF

+1.23V_D_Demod_TU

FE_DEMOD1_TS_SYNC

FE_DEMOD1_TS_VAL

+3.3V_TU

C650018pF50V

TU_Q/W_KR/BR/CO/TW/JP/AU

+3.3V_TU

FE_DEMOD1_TS_ERROR

R6520200

TU_A_GLOBAL_6/7

R652910K1%

TU_Q/N/M/W

0.1uFC6540

TU_Q/N/M/W

I2C_SDA6

+3.3V_TU

L6508BLM18PG121SN1D

TU_Q/W_KR/JP/AU

RF_SWITCH_CTL_50

FE_DEMOD1_TS_CLK

R6500 1KTU_N/M_TW/BR


FE_DEMOD1_TS_ERROR

+3.3V_TU


TU_+1.8V_TU

C650418pF50V

TU_Q/W_KR/BR/CO/TW/JP/AU



RF_SWITCH_CTL_50

+3.3V_NORMAL

R6506 100TU_S/N/Q_T/US/KR/TW/AU

IF_AGC

FE_DEMOD1_TS_DATA[0-7]

+3.3V_TU

R6516470

OPT

+3.3V_TU

IF_N

C65210.1uFOPT

CN_RESET_TU

C65260.1uF

16V

R651882

OPT

R6534 0

TU_A_GLOBAL_6/7


R6503 22

TU_Q/WLNB_OUT

C65200.1uF16V

TU_S/N/Q/W

RF_SWITCH_CTL

L6501BLM18PG121SN1D

TU_Q/W

+1.8V_TU

L6502BLM18PG121SN1D

TU_N/M_CN/BR

IF_N

I2C_SCL6

+3.3V_TU

R652811K1%

TU_Q/N/M/W

L6500BLM18PG121SN1D


C65300.1uF16V

C65010.1uF

TU_N_TW/BR

IC6501AP2132MP-2.5TRG1

EAN61387601

TU_Q/N/M/W

3

VIN

2

EN

4

VCTRL

1

PG

5

NC

6

VOUT

7

ADJ

8

GND

9

[EP]

FE_DEMOD1_TS_ERROR

IF_P

FE_DEMOD1_TS_SYNC

TU_CVBS

C653810uF10V

+3.3V_TU

+3.3V_TU

FE_DEMOD1_TS_VAL

L6507

BLM18PG121SN1D

TU_Q/W_KR/BR/TW/CO/JP/AU

Q6501MMBT3906(NXP)

TU_A_GLOBAL_6/7

E

B

C

I2C_SCL4_TU

R6513

10

TU_Q

I2C_SCL4

I2C_SDA4

+3.3V_TU

R6508-*1

1K 5%

TU_N/M/W_CN/TW/BR/CO

C65030.1uF16V

TU_S/N/Q_T/US/KR/TW/AU

R6502

10

TU_N/M

/S2_RESET_TU

R6510

33

NON_TU_W_BR/TW/CO


LNB_OUT

R65311

C65310.1uF

LNB_TX

/S2_RESET

+1.23V_D_Demod

C65160.1uF16VTU_N/M/Q/W_KR/CN/BR/JP/AU

IC6503

AZ1117BH-1.8TRE1

1

ADJ/GND

2 OUT3IN

+5V_NORMAL

FE_DEMOD1_TS_CLK

TU_CVBS_TU

R6509

33

NON_TU_W_BR/TW/CO

C65351uF

TU_Q/N/M/W

R6504 22

TU_Q/W

+3.3V_TU

/TU_RESET1_TU

R652310K

TU_Q/N/M/W

C654610uF10V

C654810uF10V

R650510K

TU_N/M_TW/BR

C650647pF50V

TU_N/Q_KR/TW/BR/CO/AU

C650847pF50V

TU_N/Q_KR/TW/BR/CO/AU

R6502-*1

1K 5%

TU_N_BR

C65020.1uF

TU_M/W_BR/TW/CO/CN

R6501 1KTU_M/W_BR/TW/CO/CN

R6513-*1

1K 5%

TU_W

R6506-*1

100

TU_W_BR/TW

C6514

0.1uF16V

TU_W_BR/TW/CO/JP/_Q_AU

C6503-*10.1uF16V

TU_W_BR/TW

C6516-*1

0.1uF16V

TU_W_BR/TW/CO/JP

C653310uF16V

C654910uF16V

R6509-*1

300

TU_W_BR/TW/COR6510-*1

220

TU_W_BR/TW/CO

L6508-*1

0

TU_W_BR/TW/CO

C6501-*11000pF

TU_W_BR/TW/CO

R6534-*1

150

TU_W_BR/TW/COC6508-*118pF

TU_W_BR/TW/CO/JPC6506-*118pF

TU_W_BR/TW/CO/JP

R6528-*16.8K

1%

TU_W_CO_T2

65

TUNER 2012.07.10

T2 : Max 1.0A6

11

14

12

1608 perallel because of derating

close to Tuner

25

mA(MAX)

7

27

26

2

3

30

Signal to Signal Width = 12mils

22

Ground Width >= 24mils

23

33

close to TUNER

13’ Tuner Type for Global TDS’S’-G501D : T/C Half NIM Horizontal TypeTDS’Q’-G501D : T/C/S2 Combo Horizontal typeTDS’Q’-G601D : T2/C/S2 Combo Horizontal TypeTDS’Q’-G651D : T2/C/S2 Combo Vertical TypeTDS’M’-C601D : China NIM with Isolater TypeTDS’W’-J551F : Japan Dual NIMTDS’W’-B651F : Brazil 2TunerTDS’W’-A651F : Taiwan 2TunerTDS’W’-K651F : Colombia DVB-T2 2Tuner

18

16

Global F/E Option Name1. TU2. Tuner Name = TDS’S’,TDS’Q’...3. Country Name = T,T2,S2,KR,US,BR ...

Example of Option nameTU_Q_T2 = apply TDSQ type tuner and T2 country TU_M/W = apply TDSM&TDSW Type Tuner

else : Max mA

36

8

24

CHB : Max mA

21

1. should be guarded by ground

31

R2

Close to the tuner

R1

35

close to TUNER

9

Vout=0.6*(1+R1/R2)

4

19

2A

should be guarded by ground

3. Signal Width >= 12mils

close to Tuner

34

17

1

2. No via on both of them

5

10

32

20

13

else : Max 0.7A

output : 1.1V_D_Demodfor DVB-T2(V1.3.1) Sony Demod



FE_DEMOD1_TS_VAL

FE_LNA_Ctrl1


FE_DEMOD3_TS_ERROR

I2C_SCL6_TU

+3.3V_TU


+3.3V_TU

IF_N

RF_SWITCH_CTL_TU

FE_DEMOD3_TS_DATA

RF_SWITCH_CTL_50


LNB_OUT

+3.3V_D_Demod


TUNER_SIF_TU

C6700

0.1uF

TU_M/W

I2C_SDA6_TU

LNB_TX

TU_+1.8V_TU

R6700

0NON_CHINA

I2C_SDA6_TU

TU_PIN2

I2C_SDA6_TU

R6701

0

NON_CHINA

+3.3V_D_Demod

CN_RESET_TU

FE_DEMOD2_TS_ERROR

TU_+1.8V_TU

I2C_SCL6_TU


L6700BLM18PG121SN1D

TU_MNQW

TU_+1.8V_TU

TU_GND_B

C67020.1uF16V

TU_W_JPFE_LNA_Ctrl2

TU_GND_B

FE_DEMOD3_TS_CLK

RF_SWITCH_CTL_50

/TU_RESET2

FE_DEMOD2_TS_SYNC

FE_DEMOD3_TS_VAL

TU_PIN2

FE_DEMOD1_TS_ERROR

R6704100

TU_M/W

IF_AGC_TU

TUNER_SIF_TU

TU_GND_B

+3.3V_D_Demod2

I2C_SDA6_TU

FE_DEMOD2_TS_CLK

C67030.1uF

TU_MNQW

TU6704-*4TDSN-T751F

TU_TW_SINGLE

1RF_S/W_CTL

2RESET

3SCL

4SDA

5+B1[3.3V]

6SIF

7+B2[1.8V]

8CVBS

9IF_AGC

10DIF[P]

11DIF[N]

12NC_1

13NC_2

14NC_3

15GND

16NC_4

17NC_5

18NC_6

19NC_7

20NC_8

21NC_9

22NC_10

23NC_11

24NC_12

25NC_13

26NC_14

27NC_15

SHIELD

59

LNA_CTRL157

LNA_CTRL258

A1A1B1

B1

TU_CVBS_TU

/S2_RESET_TU

FE_DEMOD2_TS_VAL

+3.3V_TU

TUNER_SIF_TU

FE_DEMOD1_TS_CLK

I2C_SCL6_TU

IF_P


FE_DEMOD3_TS_SYNC

TU_GND_B

FE_DEMOD2_TS_DATA

/TU_RESET1_TU

I2C_SCL6_TU

Power_D_Demod_TU

R6703

0

NON_CHINA

TU_GND_A

TU_GND_B

TU_GND_A

TU_GND_B

TU_PIN2

I2C_SCL4_TU

TU6705TDSN-G351D

TU_T2/C

1NC_1

2RESET

3SCL

4SDA

5+B1[3.3V]

6SIF

7+B2[1.8V]

8CVBS

9NC_2

10NC_3

11NC_4

12+B3[3.3V]

13+B4[1.23V]

14NC_5

15GND

16ERROR

17SYNC

18VALID

19MCLK

20D0

21D1

22D2

23D3

24D4

25D5

26D6

27D7

28

SHIELD

A1A1

B1B1

+3.3V_TU

C67010.1uF16V

TU_W_JP

TU_GND_A

TUNER_SIF_TU

TU_+1.8V_TU


+3.3V_TU


FE_DEMOD1_TS_SYNC

+1.23V_D_Demod_TU

R6702

0NON_CHINA

TU_GND_B

I2C_SDA4_TU

R6707 0

TU_Q_T2/S2

C670510uF10V

R67080

TU_W_JP

TU6702

TDSQ-H651F(B)

TU_Korea_PIP

1+B1[+3.3V_S/P]

2RESET

3TU_SCL

4TU_SDA

5+B2[3.3V_M]

6S_SIF

7+B3[1.8V_M]

8S_CVBS

9M_IF_AGC

10M_DIF[P]

11M_DIF[N]

12+B4[3.3V_S]

13+B5[1.8V_S]

14NC_1

15GND

16SD_ERROR

17SD_SYNC

18SD_VALID

19SD_MCLK

20SD_SERIAL_D0

21NC_2

22NC_3

23NC_4

24NC_5

25NC_6

26NC_7

27NC_8

28GND_1

29GND_2

30+B6[1.23V_SD]

31SD_RESET

36

SHIELD

32+B7[3.3V_SD]

33NC_9

34SD_SCL

35SD_SDA

A1A1

B1B1

TU6703

TDSQ-G651D(B)

TU_Q_T2/S2

1N.C_1

2RESET

3SCL

4SDA

5+B1[3.3V]

6SIF

7+B2[1.8V]

8CVBS

9NC_2

10NC_3

11NC_4

12NC_5

13NC_6

14NC_7

15GND

16ERROR

17SYNC

18VALID

19MCLK

20D0

21D1

22D2

23D3

24D4

25D5

26D6

27D7

28GND_2

29GND_3

30+B3[1.23V]

31DEMOD_RESET

38

+B4[3.3V]

32F22_OUTPUT

33DEMOD_SCL

34DEMOD_SDA

35LNB

36GND_4

37SHIELD

A1A1

B1B1

TU6704

TDSW-J551F(B)

TU_W_JP

1+5V_OR_+3.3V_SPLITTER

2RESET_T1

3SCL_T

4SDA_T

5+3.3V_T1

6NC_1

7+1.8V_T1

8NC_2

9NC_3

10NC_4

11NC_5

12+3.3V_T2

13+1.8V_T2

28GND_2

29GND_3

30+B5[1.23V]

31D_RESET

36LNB

32+B6[3.3V]

33NC_6

34D_SCL

35D_SDA

GND_437

GND_538

GND_639

TS1_ERROR40

TS1_SYNC41

TS1_VALID42

TS1_MCLK43

TS1_DATA44

TS2_ERROR45

TS2_SYNC46

TS2_VALID47

TS2_MCLK48

TS2_DATA49

NC_750

RESET_T251

LNA_CTR157

LNA_CTR258

SHIELD

59

NC_855

+3.3V_S_TUNER54

SDA_S53

SCL_S52

NC_956

A1A1

B1B1

TU6700TDSS-H651F(B)

TU_S_US

5+B1[3.3V]

11DIF[N]

2RESET

10DIF[P]

4SDA

1NC

9IF_AGC

8CVBS

3SCL

7+B2[1.8V]

6SIF

12

SHIELD

A1A1

B1B1

TU6701

TDSM-C651D(B)

TU_M_CN8

CVBS

9NC_1

10NC_2

11NC_3

12+B3[3.3V]

13+B4[1.23V]

14DEMOD_RESET

15GND

16NC_4

17SYNC

18VALID

19MCLK

20D0

21D1

22D2

23D3

24D4

25D5

26D6

27D7

RF_S/W_CTL50

RESET51

SHIELD

59

SIF55

+B1[3.3V]54

SDA53

SCL52

+B2[1.8V]56

A1A1

A2

A2

B1B1

B2

B2

TU6702-*1

TDSQ-A651D(B)

TU_AJJA

1+B1[+3.3V_S/P]

2RESET

3TU_SCL

4TU_SDA

5+B2[3.3V_M]

6S_SIF

7+B3[1.8V_M]

8S_CVBS

9M_IF_AGC

10M_DIF[P]

11M_DIF[N]

12+B4[3.3V_S]

13+B5[1.8V_S]

14NC_1

15GND

16SD_ERROR

17SD_SYNC

18SD_VALID

19SD_MCLK

20SD_SERIAL_D0

21NC_2

22NC_3

23NC_4

24NC_5

25NC_6

26NC_7

27NC_8

28GND_1

29GND_2

30+B6[1.23V_SD]

31SD_RESET

36

SHIELD

32+B7[3.3V_SD]

33NC_9

34SD_SCL

35SD_SDA

A1A1

B1B1

C67061000pF630V

TU_M_CN

C6707

1000pF

630V

TU_M_CN

C670910uF10V

TU_QW+3.3V_TU

L6701BLM18PG121SN1D

TU_QW

C67080.1uF

TU_QW+3.3V_D_Demod2

C670410uF10V

TU_MNQW

TU6704-*1

TDSW-B652F(B)

TU_BR

1+B1(3.3V)_S/P

2T_RESET

3TU_SCL

4TU_SDA

5+B2[3.3V_M]

6S_SIF

7+B3[1.8V_M]

8S_CVBS

9M_IF_AGC

10M_DIF[P]

11M_DIF[N]

12+B4[3.3V_S]

13+B5[1.8V_S]

28GND_1

29GND_2

30+B6[1.23V_D]

31D_RESET

32+B7[3.3V_D]

33NC_1

34D_SCL

35D_SDA

GND_338

GND_439

MD_ERROR40

MD_SYNC41

MD_VALID42

MD_MCLK43

MD_DATA44

SD_ERROR45

SD_SYNC46

SD_VALID47

SD_MCLK48

SD_DATA49

RF_S/W_CTRL50

NC_251

SHIELD

59

A1A1

B1B1

TU6704-*2

TDSW-A652F(B)

TU_TW

1+B1(3.3V)_S/P

2T_RESET

3TU_SCL

4TU_SDA

5+B2[3.3V_M]

6S_SIF

7+B3[1.8V_M]

8S_CVBS

9M_IF_AGC

10M_DIF[P]

11M_DIF[N]

12+B4[3.3V_S]

13+B5[1.8V_S]

28GND_1

29GND_2

30+B6[1.23V_D]

31D_RESET

32+B7[3.3V_D]

33NC_1

34SD_SCL

35SD_SDA

GND_338

GND_439

NC_240

NC_341

NC_442

NC_543

NC_644

SD_ERROR45

SD_SYNC46

SD_VALID47

SD_MCLK48

SD_DATA49

RF_S/W_CTRL50

NC_751

SHIELD

59

A1A1

B1B1

R6705

10KTU_W_JP

R6706

10KTU_W_JP

TU6704-*3

TDSW-K651F(B)

TU_CO

1+B1(3.3V)_S/P

2T_RESET

3TU_SCL

4TU_SDA

5+B2[3.3V_M]

6S_SIF

7+B3[1.8V_M]

8S_CVBS

9M_IF_AGC

10M_DIF[P]

11M_DIF[N]

12+B4[3.3V_S]

13+B5[1.8V_S]

28GND_1

29GND_2

30+B6[1.1V_D]

31D_RESET

32+B7[3.3V_D]

33NC_1

34D_SCL

35D_SDA

GND_338

GND_439

MD_ERROR40

MD_SYNC41

MD_VALID42

MD_MCLK43

MD_DATA44

SD_ERROR45

SD_SYNC46

SD_VALID47

SD_MCLK48

SD_DATA49

RF_S/W_CTRL50

NC_251

SHIELD

59

A1A1

B1B1

+1.8V_TU

ZD6501

2.5V

OPT

TU_SYMBOL 2012.09.14

12

18

11

GND seperation for CHINA tuner

9

22

41

425152

40

4

6

50

3

46

44

25

27

5

31

16

47

54

2

14

23

17

49

53

30

35

20

58

43

10

56

45

55

57

34

32

19

7

13

26

24

36

1

33

21

8

48

BSD-NC4_H067-HD

EOS for Tuner 1.8V LDO


THERMAL


A_GND

C690510uF25VLNB

R69002.2K1WLNB

A_GND

L6900

15uH

SP-7850_15

LNB

R69040

I2C_SDA4

C690710uF25VLNB

R690133

LNB

D6901

30V

MBR230LSFT1G

LNB

C69100.1uF50V

LNB

C6911

0.22uF

LNB

+12V

D6900LNB

LNB_OUT

D6903-*1

40V

LNB_SX34

D6902

30V

LNB

C69030.01uF

50VLNB

R690233

LNB

C690610uF25VLNB

A_GND

D6904-*1

40VLNB_SX34

A_GND

A_GND

R690339K

1/16W1%

LNB

A_GND

D6903

40V

LNB_SMAB34

D6904

40VLNB_SMAB34

LNB_TX

C69040.1uF50VLNB

C69080.1uF

LNB

C690910uF25VLNB

C6912

0.1uFLNB

C69020.22uF25VLNB

I2C_SCL4

C690018pFLNB

C690133pFLNB

IC6900A8303SESTR-T

LNB

1VCP

3NC_1

7SCL

9ADD

10

TONECTRL

11 TCAP

12 ISET

13 VREG

14 GND

15 VIN

16

LX

17

GNDLX

18

NC_2

19

NC_3

20

BOOST

5TDO

8SDA

6IRQ

4TDI

2LNB 21

[EP]GND

69

LNB 2012.03.08

Input trace widths should be sized to conduct at least 3A

Ouput trace widths should be sized to conduct at least 2A

DVB-S2 LNB Part Allegro

Surge protectioin

close to VIN pin(#15)

Max 1.3A

close to Boost pin(#1)

(Option:LNB)

2A

3.5A

Close to Tuner

Caution!! need isolated GND 留

3A



TXBCLKP/TX2P

R72170

UD

TXC3N

TXB0N/TX5N

TXC2P

TXB3N/TX1N

TXBCLKN/TX2N

BPL_IN

C720110uF16VOPT

R7208 0OLED

TXA0N/TX11N

TXC0P

I2C_SDA1

TXC0N

TXA0P/TX11P

R721410K

LVDS_BIT_SEL_LOW

TXC2N

R72040

OLED

TXA4P/TX6P

TXCCLKP

L7201120-ohm

LVDS

R7215

10K

OLED

TXACLKP/TX8P

TXB4N/TX0N

TXA1P/TX10P

R7209 0OLED

TXB3P/TX1P

TXB2P/TX3P

P7202

FI-RE41S-HF-J-R1500

LVDS 1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

TXC4N

TXC4P

TXC1P

TXA4N/TX6N

TXC3P

T_CON_SYS_POWER_OFF

TXA2N/TX9N

TXACLKN/TX8N

TXB0P/TX5P

R7210 33UD_OLED

TXA2P/TX9P

TXA3P/TX7P

TXCCLKN

TXC1N

T_CON_SYS_POWER_OFF

P7201

FI-RE51S-HF-J-R1500

LVDS

1NC

2NC

3NC

4NC

5NC

6NC

7LVDS_SEL

8NC

9NC

10L/DIM_ENABLE

11GND

12RA0N

13RA0P

14RA1N

15RA1P

16RA2N

17RA2P

18GND

19RACLKN

20RACLKP

21GND

22RA3N

23RA3P

24RA4N

25RA4P

26GND

27BIT_SEL

28RB0N

29RB0P

30RB1N

31RB1P

32RB2N

33RB2P

34GND

35RBCLKN

36RBCLKP

37GND

38RB3N

39RB3P

40RB4N

41RB4P

42GND

43GND

44GND

45GND

46GND

47NC

48VLCD

49VLCD

50VLCD

51VLCD

52

GND

FRC_RESET

TXA3N/TX7N

R72130

ALEF

TXB1N/TX4N

TXB1P/TX4P

TXB4P/TX0P

I2C_SCL1

LED_R

C72030.1uF16V

LVDS

TXB2N/TX3N

FRC_FLASH_WP

INV_CTL

PANEL_VCC

TXA1N/TX10N

TXA1N

TXB2P

TXA4P

TXB2N

TXB1P

TXACLKN

TXA1P

TXB0P

TXB1N

TXA4N

TXACLKP

TXB0N

R7201 0UD_CPBOX I2C_SCL1

R7200 0UD_CPBOX I2C_SDA1

VA7201

ADMC 5M 02 200L

OPT

R7216100

OLED

C72040.1uF

OPT

LVDS INTERFACE

[41Pin LVDS OUTPUT Connector] [51Pin LVDS OUTPUT Connector]

BIT_SEL

LVDS

TXD3N/TX13N

TXD2P/TX15P

TXD0N/TX17N

TXD1P/TX16P

TXD2N/TX15N

TXD3P/TX13P

TXD4P/TX12P

TXDCLKN/TX14N

TXD4N/TX12N

TXD1N/TX16N

TXDCLKP/TX14P

TXD0P/TX17P

H13 BALL NAME

BSD-NC4_H072-HD

2012-10-15

OLED : FRC_RESET = LVDS_VAL INV_CTL = ELVDD_ON



EMMC_DATA[4]

EMMC_DATA[1]

EMMC_DATA[6]

EMMC_DATA[5]

EMMC_DATA[3]

EMMC_DATA[2]

EMMC_DATA[7]

EMMC_DATA[0]

3.3V_EMMC

AR8101221/16W

EMMC_SERIAL_22

EMMC_RST

EMMC_CMD_BALL

R8104-*1

47K

C81050.1uF16V

EMMC_CMD_BALL

R8106-*1

47K

R8102-*1

47K

R8105-*1

47K

R8101-*1

47K

DAT4

R8104

10K

DAT4

EMMC_RESET_BALL

AR8100221/16W

EMMC_SERIAL_22

DAT6

R8117

10K

R8106

10K

DAT3

EMMC_CLK_BALL

EMMC_CLK_BALL

C81020.1uF16V

EMMC_CLK AR8102 22

EMMC_SERIAL_22

EMMC_VDDI

EMMC_RESET_BALL

DAT5

DAT5

EMMC_DATA[0-7]

C81032.2uF10V

R8116

10K

R8107

10K

R8107-*1

47K

R8103

10K

R8103-*1

47K

R8101

10K

R8105

10K

DAT3

R8100

10K

IC8100-*3KLM2G1HE3F-B001

SAMSUNG_EMMC_2GB

DAT0A3

DAT1A4

DAT2A5

DAT3B2

DAT4B3

DAT5B4

DAT6B5

DAT7B6

CLKM6

CMDM5

NC_3A6

NC_4A7

NC_23C5

NC_42E5

NC_43E8

NC_44E9

NC_45E10

NC_52F10

NC_58G3

NC_59G10

NC_66H5

NC_73J5

NC_80K6

NC_81K7

NC_82K10

NC_116P7

NC_119P10

RSTNK5

VDD_1C6

VDD_2M4

VDD_3N4

VDD_4P3

VDD_5P5

VDDF_1E6

VDDF_2F5

VDDF_3J10

VDDF_4K9

VDDIC2

VSS_1C4

VSS_2E7

VSS_3G5

VSS_4H10

VSS_5K8

VSS_6N2

VSS_7N5

VSS_8P4

VSS_9P6

NC_1A1

NC_2A2

NC_5A8

NC_6A9

NC_7A10

NC_8A11

NC_9A12

NC_10A13

NC_11A14

NC_12B1

NC_13B7

NC_14B8

NC_15B9

NC_16B10

NC_17B11

NC_18B12

NC_19B13

NC_20B14

NC_21C1

NC_22C3

NC_24C7

NC_25C8

NC_26C9

NC_27C10

NC_28C11

NC_29C12

NC_30C13

NC_31C14

NC_32D1

NC_33D2

NC_34D3

NC_35D4

NC_36D12

NC_37D13

NC_38D14

NC_39E1

NC_40E2

NC_41E3

NC_46E12

NC_47E13

NC_48E14

NC_49F1

NC_50F2

NC_51F3

NC_53F12

NC_54F13

NC_55F14

NC_56G1

NC_57G2

NC_60G12

NC_61G13

NC_62G14

NC_63H1

NC_64H2

NC_65H3

NC_67H12

NC_68H13

NC_69H14

NC_70J1

NC_71J2

NC_72J3

NC_74J12

NC_75J13

NC_76J14

NC_77K1

NC_78K2

NC_79K3

NC_83K12

NC_84K13

NC_85K14

NC_86L1

NC_87L2

NC_88L3

NC_89L12

NC_90L13

NC_91L14

NC_92M1

NC_93M2

NC_94M3

NC_95M7

NC_96M8

NC_97M9

NC_98M10

NC_99M11

NC_100M12

NC_101M13

NC_102M14

NC_103N1

NC_104N3

NC_105N6

NC_106N7

NC_107N8

NC_108N9

NC_109N10

NC_110N11

NC_111N12

NC_112N13

NC_113N14

NC_114P1

NC_115P2

NC_117P8

NC_118P9

NC_120P11

NC_121P12

NC_122P13

NC_123P14

3.3V_EMMC

DAT5

DAT6

C81000.1uF16V

OPT

C81062.2uF10V

R8100-*1

47K

EMMC_VDDI

EMMC_CMD

C810710pF50V

OPT

R8102

10K

3.3V_EMMC

IC8100-*4THGBM5G7A2JBAIR

TOSHIBA_EMMC_16GB

DAT0A3

DAT1A4

DAT2A5

DAT3B2

DAT4B3

DAT5B4

DAT6B5

DAT7B6

CLKM6

CMDM5

RFU_1A6

RFU_2A7

NC_21C5

RFU_3E5

RFU_4E8

RFU_5E9

RFU_6E10

RFU_7F10

RFU_8G3

RFU_9G10

RFU_10H5

RFU_11J5

RFU_12K6

RFU_13K7

RFU_14K10

RFU_15P7

RFU_16P10

RSTNK5

VCCQ_1C6

VCCQ_2M4

VCCQ_3N4

VCCQ_4P3

VCCQ_5P5

VCC_1E6

VCC_2F5

VCC_3J10

VCC_4K9

VDDIC2

VSS_1E7

VSS_2G5

VSS_3H10

VSS_4K8

VSSQ_1C4

VSSQ_2N2

VSSQ_3N5

VSSQ_4P4

VSSQ_5P6

NC_1A1

NC_2A2

NC_3A8

NC_4A9

NC_5A10

NC_6A11

NC_7A12

NC_8A13

NC_9A14

NC_10B1

NC_11B7

NC_12B8

NC_13B9

NC_14B10

NC_15B11

NC_16B12

NC_17B13

NC_18B14

NC_19C1

NC_20C3

NC_22C7

NC_23C8

NC_24C9

NC_25C10

NC_26C11

NC_27C12

NC_28C13

NC_29C14

NC_30D1

NC_31D2

NC_32D3

NC_33D4

NC_34D12

NC_35D13

NC_36D14

NC_37E1

NC_38E2

NC_39E3

NC_40E12

NC_41E13

NC_42E14

NC_43F1

NC_44F2

NC_45F3

NC_46F12

NC_47F13

NC_48F14

NC_49G1

NC_50G2

NC_51G12

NC_52G13

NC_53G14

NC_54H1

NC_55H2

NC_56H3

NC_57H12

NC_58H13

NC_59H14

NC_60J1

NC_61J2

NC_62J3

NC_63J12

NC_64J13

NC_65J14

NC_66K1

NC_67K2

NC_68K3

NC_69K12

NC_70K13

NC_71K14

NC_72L1

NC_73L2

NC_74L3

NC_75L12

NC_76L13

NC_77L14

NC_78M1

NC_79M2

NC_80M3

NC_81M7

NC_82M8

NC_83M9

NC_84M10

NC_85M11

NC_86M12

NC_87M13

NC_88M14

NC_89N1

NC_90N3

NC_91N6

NC_92N7

NC_93N8

NC_94N9

NC_95N10

NC_96N11

NC_97N12

NC_98N13

NC_99N14

NC_100P1

NC_101P2

NC_102P8

NC_103P9

NC_104P11

NC_105P12

NC_106P13

NC_107P14

AR8100-*11001/16W

EMMC_SERIAL_100

AR8101-*11001/16W

EMMC_SERIAL_100

AR8102-*11001/16W

EMMC_SERIAL_100

IC8100-*5KLM4G1FE3B-B001

SAMSUNG_EMMC_4GB

DAT0A3

DAT1A4

DAT2A5

DAT3B2

DAT4B3

DAT5B4

DAT6B5

DAT7B6

CLKM6

CMDM5

NC_3A6

NC_4A7

NC_23C5

NC_42E5

NC_43E8

NC_44E9

NC_45E10

NC_52F10

NC_58G3

NC_59G10

NC_66H5

NC_73J5

NC_80K6

NC_81K7

NC_82K10

NC_116P7

NC_119P10

RSTNK5

VDD_1C6

VDD_2M4

VDD_3N4

VDD_4P3

VDD_5P5

VDDF_1E6

VDDF_2F5

VDDF_3J10

VDDF_4K9

VDDIC2

VSS_2E7

VSS_3G5

VSS_4H10

VSS_5K8

VSS_1C4

VSS_6N2

VSS_7N5

VSS_8P4

VSS_9P6

NC_1A1

NC_2A2

NC_5A8

NC_6A9

NC_7A10

NC_8A11

NC_9A12

NC_10A13

NC_11A14

NC_12B1

NC_13B7

NC_14B8

NC_15B9

NC_16B10

NC_17B11

NC_18B12

NC_19B13

NC_20B14

NC_21C1

NC_22C3

NC_24C7

NC_25C8

NC_26C9

NC_27C10

NC_28C11

NC_29C12

NC_30C13

NC_31C14

NC_32D1

NC_33D2

NC_34D3

NC_35D4

NC_36D12

NC_37D13

NC_38D14

NC_39E1

NC_40E2

NC_41E3

NC_46E12

NC_47E13

NC_48E14

NC_49F1

NC_50F2

NC_51F3

NC_53F12

NC_54F13

NC_55F14

NC_56G1

NC_57G2

NC_60G12

NC_61G13

NC_62G14

NC_63H1

NC_64H2

NC_65H3

NC_67H12

NC_68H13

NC_69H14

NC_70J1

NC_71J2

NC_72J3

NC_74J12

NC_75J13

NC_76J14

NC_77K1

NC_78K2

NC_79K3

NC_83K12

NC_84K13

NC_85K14

NC_86L1

NC_87L2

NC_88L3

NC_89L12

NC_90L13

NC_91L14

NC_92M1

NC_93M2

NC_94M3

NC_95M7

NC_96M8

NC_97M9

NC_98M10

NC_99M11

NC_100M12

NC_101M13

NC_102M14

NC_103N1

NC_104N3

NC_105N6

NC_106N7

NC_107N8

NC_108N9

NC_109N10

NC_110N11

NC_111N12

NC_112N13

NC_113N14

NC_114P1

NC_115P2

NC_117P8

NC_118P9

NC_120P11

NC_121P12

NC_122P13

NC_123P14


TOSHIBA_EMMC_8GB

DAT0A3

DAT1A4

DAT2A5

DAT3B2

DAT4B3

DAT5B4

DAT6B5

DAT7B6

CLKM6

CMDM5

RFU_1A6

RFU_2A7

NC_21C5

RFU_3E5

RFU_4E8

RFU_5E9

RFU_6E10

RFU_7F10

RFU_8G3

RFU_9G10

RFU_10H5

RFU_11J5

RFU_12K6

RFU_13K7

RFU_14K10

RFU_15P7

RFU_16P10

RSTNK5

VCCQ_1C6

VCCQ_2M4

VCCQ_3N4

VCCQ_4P3

VCCQ_5P5

VCC_1E6

VCC_2F5

VCC_3J10

VCC_4K9

VDDIC2

VSS_1E7

VSS_2G5

VSS_3H10

VSS_4K8

VSSQ_1C4

VSSQ_2N2

VSSQ_3N5

VSSQ_4P4

VSSQ_5P6

NC_1A1

NC_2A2

NC_3A8

NC_4A9

NC_5A10

NC_6A11

NC_7A12

NC_8A13

NC_9A14

NC_10B1

NC_11B7

NC_12B8

NC_13B9

NC_14B10

NC_15B11

NC_16B12

NC_17B13

NC_18B14

NC_19C1

NC_20C3

NC_22C7

NC_23C8

NC_24C9

NC_25C10

NC_26C11

NC_27C12

NC_28C13

NC_29C14

NC_30D1

NC_31D2

NC_32D3

NC_33D4

NC_34D12

NC_35D13

NC_36D14

NC_37E1

NC_38E2

NC_39E3

NC_40E12

NC_41E13

NC_42E14

NC_43F1

NC_44F2

NC_45F3

NC_46F12

NC_47F13

NC_48F14

NC_49G1

NC_50G2

NC_51G12

NC_52G13

NC_53G14

NC_54H1

NC_55H2

NC_56H3

NC_57H12

NC_58H13

NC_59H14

NC_60J1

NC_61J2

NC_62J3

NC_63J12

NC_64J13

NC_65J14

NC_66K1

NC_67K2

NC_68K3

NC_69K12

NC_70K13

NC_71K14

NC_72L1

NC_73L2

NC_74L3

NC_75L12

NC_76L13

NC_77L14

NC_78M1

NC_79M2

NC_80M3

NC_81M7

NC_82M8

NC_83M9

NC_84M10

NC_85M11

NC_86M12

NC_87M13

NC_88M14

NC_89N1

NC_90N3

NC_91N6

NC_92N7

NC_93N8

NC_94N9

NC_95N10

NC_96N11

NC_97N12

NC_98N13

NC_99N14

NC_100P1

NC_101P2

NC_102P8

NC_103P9

NC_104P11

NC_105P12

NC_106P13

NC_107P14


TOSHIBA_EMMC_4GB

DAT0A3

DAT1A4

DAT2A5

DAT3B2

DAT4B3

DAT5B4

DAT6B5

DAT7B6

CLKM6

CMDM5

RFU_1A6

RFU_2A7

NC_21C5

RFU_3E5

RFU_4E8

RFU_5E9

RFU_6E10

RFU_7F10

RFU_8G3

RFU_9G10

RFU_10H5

RFU_11J5

RFU_12K6

RFU_13K7

RFU_14K10

RFU_15P7

RFU_16P10

RST_NK5

VCCQ_1C6

VCCQ_2M4

VCCQ_3N4

VCCQ_4P3

VCCQ_5P5

VCC_1E6

VCC_2F5

VCC_3J10

VCC_4K9

VDDIC2

VSS_1E7

VSS_2G5

VSS_3H10

VSS_4K8

VSSQ_1C4

VSSQ_2N2

VSSQ_3N5

VSSQ_4P4

VSSQ_5P6

NC_1A1

NC_2A2

NC_3A8

NC_4A9

NC_5A10

NC_6A11

NC_7A12

NC_8A13

NC_9A14

NC_10B1

NC_11B7

NC_12B8

NC_13B9

NC_14B10

NC_15B11

NC_16B12

NC_17B13

NC_18B14

NC_19C1

NC_20C3

NC_22C7

NC_23C8

NC_24C9

NC_25C10

NC_26C11

NC_27C12

NC_28C13

NC_29C14

NC_30D1

NC_31D2

NC_32D3

NC_33D4

NC_34D12

NC_35D13

NC_36D14

NC_37E1

NC_38E2

NC_39E3

NC_40E12

NC_41E13

NC_42E14

NC_43F1

NC_44F2

NC_45F3

NC_46F12

NC_47F13

NC_48F14

NC_49G1

NC_50G2

NC_51G12

NC_52G13

NC_53G14

NC_54H1

NC_55H2

NC_56H3

NC_57H12

NC_58H13

NC_59H14

NC_60J1

NC_61J2

NC_62J3

NC_63J12

NC_64J13

NC_65J14

NC_66K1

NC_67K2

NC_68K3

NC_69K12

NC_70K13

NC_71K14

NC_72L1

NC_73L2

NC_74L3

NC_75L12

NC_76L13

NC_77L14

NC_78M1

NC_79M2

NC_80M3

NC_81M7

NC_82M8

NC_83M9

NC_84M10

NC_85M11

NC_86M12

NC_87M13

NC_88M14

NC_89N1

NC_90N3

NC_91N6

NC_92N7

NC_93N8

NC_94N9

NC_95N10

NC_96N11

NC_97N12

NC_98N13

NC_99N14

NC_100P1

NC_101P2

NC_102P8

NC_103P9

NC_104P11

NC_105P12

NC_106P13

NC_107P14

IC8100H26M31002GPR

HYNIX_EMMC_4GB

DAT0A3

DAT1A4

DAT2A5

DAT3B2

DAT4B3

DAT5B4

DAT6B5

DAT7B6

CLKM6

CMDM5

NC_3A6

NC_4A7

NC_23C5

NC_42E5

NC_43E8

NC_44E9

NC_45E10

NC_52F10

NC_58G3

NC_59G10

NC_66H5

NC_73J5

NC_80K6

NC_81K7

NC_82K10

NC_116P7

NC_119P10

RESETK5

VCCQ_1C6

VCCQ_2M4

VCCQ_3N4

VCCQ_4P3

VCCQ_5P5

VCC_1E6

VCC_2F5

VCC_3J10

VCC_4K9

VDDIC2

VSS_1E7

VSS_2G5

VSS_3H10

VSS_4K8

VSSQ_1C4

VSSQ_2N2

VSSQ_3N5

VSSQ_4P4

VSSQ_5P6

NC_1A1

NC_2A2

NC_5A8

NC_6A9

NC_7A10

NC_8A11

NC_9A12

NC_10A13

NC_11A14

NC_12B1

NC_13B7

NC_14B8

NC_15B9

NC_16B10

NC_17B11

NC_18B12

NC_19B13

NC_20B14

NC_21C1

NC_22C3

NC_24C7

NC_25C8

NC_26C9

NC_27C10

NC_28C11

NC_29C12

NC_30C13

NC_31C14

NC_32D1

NC_33D2

NC_34D3

NC_35D4

NC_36D12

NC_37D13

NC_38D14

NC_39E1

NC_40E2

NC_41E3

NC_46E12

NC_47E13

NC_48E14

NC_49F1

NC_50F2

NC_51F3

NC_53F12

NC_54F13

NC_55F14

NC_56G1

NC_57G2

NC_60G12

NC_61G13

NC_62G14

NC_63H1

NC_64H2

NC_65H3

NC_67H12

NC_68H13

NC_69H14

NC_70J1

NC_71J2

NC_72J3

NC_74J12

NC_75J13

NC_76J14

NC_77K1

NC_78K2

NC_79K3

NC_83K12

NC_84K13

NC_85K14

NC_86L1

NC_87L2

NC_88L3

NC_89L12

NC_90L13

NC_91L14

NC_92M1

NC_93M2

NC_94M3

NC_95M7

NC_96M8

NC_97M9

NC_98M10

NC_99M11

NC_100M12

NC_101M13

NC_102M14

NC_103N1

NC_104N3

NC_105N6

NC_106N7

NC_107N8

NC_108N9

NC_109N10

NC_110N11

NC_111N12

NC_112N13

NC_113N14

NC_114P1

NC_115P2

NC_117P8

NC_118P9

NC_120P11

NC_121P12

NC_122P13

NC_123P14

DUMMY_1DU1

DUMMY_2DU2

DUMMY_3DU3

DUMMY_4DU4

DUMMY_5DU5

DUMMY_6DU6

DUMMY_7DU7

DUMMY_8DU8

DUMMY_9DU9

DUMMY_10DU10

DUMMY_11DU11

DUMMY_12DU12

DUMMY_13DU13

DUMMY_14DU14

DUMMY_15DU15

DUMMY_16DU16

IC8100-*2H26M21001ECR

HYNIX_EMMC_2GB

DAT0A3

DAT1A4

DAT2A5

DAT3B2

DAT4B3

DAT5B4

DAT6B5

DAT7B6

CLKM6

CMDM5

NC_3A6

NC_4A7

NC_23C5

NC_42E5

NC_43E8

NC_44E9

NC_45E10

NC_52F10

NC_58G3

NC_59G10

NC_66H5

NC_73J5

NC_80K6

NC_81K7

NC_82K10

NC_116P7

NC_119P10

RESETK5

VCCQ_1C6

VCCQ_2M4

VCCQ_3N4

VCCQ_4P3

VCCQ_5P5

VCC_1E6

VCC_2F5

VCC_3J10

VCC_4K9

VDDIC2

VSS_1E7

VSS_2G5

VSS_3H10

VSS_4K8

VSSQ_1C4

VSSQ_2N2

VSSQ_3N5

VSSQ_4P4

VSSQ_5P6

NC_1A1

NC_2A2

NC_5A8

NC_6A9

NC_7A10

NC_8A11

NC_9A12

NC_10A13

NC_11A14

NC_12B1

NC_13B7

NC_14B8

NC_15B9

NC_16B10

NC_17B11

NC_18B12

NC_19B13

NC_20B14

NC_21C1

NC_22C3

NC_24C7

NC_25C8

NC_26C9

NC_27C10

NC_28C11

NC_29C12

NC_30C13

NC_31C14

NC_32D1

NC_33D2

NC_34D3

NC_35D4

NC_36D12

NC_37D13

NC_38D14

NC_39E1

NC_40E2

NC_41E3

NC_46E12

NC_47E13

NC_48E14

NC_49F1

NC_50F2

NC_51F3

NC_53F12

NC_54F13

NC_55F14

NC_56G1

NC_57G2

NC_60G12

NC_61G13

NC_62G14

NC_63H1

NC_64H2

NC_65H3

NC_67H12

NC_68H13

NC_69H14

NC_70J1

NC_71J2

NC_72J3

NC_74J12

NC_75J13

NC_76J14

NC_77K1

NC_78K2

NC_79K3

NC_83K12

NC_84K13

NC_85K14

NC_86L1

NC_87L2

NC_88L3

NC_89L12

NC_90L13

NC_91L14

NC_92M1

NC_93M2

NC_94M3

NC_95M7

NC_96M8

NC_97M9

NC_98M10

NC_99M11

NC_100M12

NC_101M13

NC_102M14

NC_103N1

NC_104N3

NC_105N6

NC_106N7

NC_107N8

NC_108N9

NC_109N10

NC_110N11

NC_111N12

NC_112N13

NC_113N14

NC_114P1

NC_115P2

NC_117P8

NC_118P9

NC_120P11

NC_121P12

NC_122P13

NC_123P14

IC8100-*7KLMAG2GE4A-A001

SAMSUNG_EMMC_16G

DAT0A3

DAT1A4

DAT2A5

DAT3B2

DAT4B3

DAT5B4

DAT6B5

DAT7B6

CLKM6

CMDM5

RFU_1A6

RFU_2A7

RFU_3C5

RFU_4E5

RFU_5E8

RFU_6E9

NC_39E10

RFU_7F10

RFU_8G3

RFU_9G10

RFU_10H5

RFU_11J5

RFU_12K6

RFU_13K7

RFU_14K10

RFU_15P7

NC_104P10

RESETK5

VDD_1C6

VDD_2M4

VDD_3N4

VDD_4P3

VDD_5P5

VDDF_1E6

VDDF_2F5

VDDF_3J10

VDDF_4K9

VDDIC2

VSS_2E7

VSS_3G5

VSS_4H10

VSS_9K8

VSS_1C4

VSS_5N2

VSS_6N5

VSS_7P4

VSS_8P6

NC_1A1

NC_2A2

NC_3A8

NC_4A9

NC_5A10

NC_6A11

NC_7A12

NC_8A13

NC_9A14

NC_10B1

NC_11B7

NC_12B8

NC_13B9

NC_14B10

NC_15B11

NC_16B12

NC_17B13

NC_18B14

NC_19C1

NC_20C3

NC_21C7

NC_22C8

NC_23C9

NC_24C10

NC_25C11

NC_26C12

NC_27C13

NC_28C14

NC_29D1

NC_30D2

NC_31D3

NC_32D4

NC_33D12

NC_34D13

NC_35D14

NC_36E1

NC_37E2

NC_38E3

NC_40E12

NC_41E13

NC_42E14

NC_43F1

NC_44F2

NC_45F3

NC_46F12

NC_47F13

NC_48F14

NC_49G1

NC_50G2

NC_51G12

NC_52G13

NC_53G14

NC_54H1

NC_55H2

NC_56H3

NC_57H12

NC_58H13

NC_59H14

NC_60J1

NC_61J2

NC_62J3

NC_63J12

NC_64J13

NC_65J14

NC_66K1

NC_67K2

NC_68K3

NC_69K12

NC_70K13

NC_71K14

NC_72L1

NC_73L2

NC_74L3

NC_75L12

NC_76L13

NC_77L14

NC_78M1

NC_79M2

NC_80M3

NC_81M7

NC_82M8

NC_83M9

NC_84M10

NC_85M11

NC_86M12

NC_87M13

NC_88M14

NC_89N1

NC_90N3

NC_91N6

NC_92N7

NC_93N8

NC_94N9

NC_95N10

NC_96N11

NC_97N12

NC_98N13

NC_99N14

NC_100P1

NC_101P2

NC_102P8

NC_103P9

RFU_16P11

NC_105P12

NC_106P13

NC_107P14

DUMMY_1DU1

DUMMY_2DU2

DUMMY_3DU3

DUMMY_4DU4

DUMMY_5DU5

DUMMY_6DU6

DUMMY_7DU7

DUMMY_8DU8

DUMMY_9DU9

DUMMY_10DU10

DUMMY_11DU11

DUMMY_12DU12

DUMMY_13DU13

DUMMY_14DU14

DUMMY_15DU15

DUMMY_16DU16

IC8100-*8H26M42002GMR

HYNIX_EMMC_8GB

DAT0A3

DAT1A4

DAT2A5

DAT3B2

DAT4B3

DAT5B4

DAT6B5

DAT7B6

CLKM6

CMDM5

NC_3A6

NC_4A7

NC_23C5

NC_42E5

NC_43E8

NC_44E9

NC_45E10

NC_52F10

NC_58G3

NC_59G10

NC_66H5

NC_73J5

NC_80K6

NC_81K7

NC_82K10

NC_116P7

NC_119P10

RESETK5

VCCQ_1C6

VCCQ_2M4

VCCQ_3N4

VCCQ_4P3

VCCQ_5P5

VCC_1E6

VCC_2F5

VCC_3J10

VCC_4K9

VDDIC2

VSS_1E7

VSS_2G5

VSS_3H10

VSS_4K8

VSSQ_1C4

VSSQ_2N2

VSSQ_3N5

VSSQ_4P4

VSSQ_5P6

NC_1A1

NC_2A2

NC_5A8

NC_6A9

NC_7A10

NC_8A11

NC_9A12

NC_10A13

NC_11A14

NC_12B1

NC_13B7

NC_14B8

NC_15B9

NC_16B10

NC_17B11

NC_18B12

NC_19B13

NC_20B14

NC_21C1

NC_22C3

NC_24C7

NC_25C8

NC_26C9

NC_27C10

NC_28C11

NC_29C12

NC_30C13

NC_31C14

NC_32D1

NC_33D2

NC_34D3

NC_35D4

NC_36D12

NC_37D13

NC_38D14

NC_39E1

NC_40E2

NC_41E3

NC_46E12

NC_47E13

NC_48E14

NC_49F1

NC_50F2

NC_51F3

NC_53F12

NC_54F13

NC_55F14

NC_56G1

NC_57G2

NC_60G12

NC_61G13

NC_62G14

NC_63H1

NC_64H2

NC_65H3

NC_67H12

NC_68H13

NC_69H14

NC_70J1

NC_71J2

NC_72J3

NC_74J12

NC_75J13

NC_76J14

NC_77K1

NC_78K2

NC_79K3

NC_83K12

NC_84K13

NC_85K14

NC_86L1

NC_87L2

NC_88L3

NC_89L12

NC_90L13

NC_91L14

NC_92M1

NC_93M2

NC_94M3

NC_95M7

NC_96M8

NC_97M9

NC_98M10

NC_99M11

NC_100M12

NC_101M13

NC_102M14

NC_103N1

NC_104N3

NC_105N6

NC_106N7

NC_107N8

NC_108N9

NC_109N10

NC_110N11

NC_111N12

NC_112N13

NC_113N14

NC_114P1

NC_115P2

NC_117P8

NC_118P9

NC_120P11

NC_121P12

NC_122P13

NC_123P14

C81041uF10V

11.09.29

81

eMMC

Don’t Connect Power At VDDI

EMMC DATA LINE10K PULL/UP FOR M13

EMMC DATA LINE 47K PULL/UP

(Just Interal LDO Capacitor)

eMMC I/F

eMMC serial 100 ohm option


OLED vs. LED

BLU

+Prism

+Diffuser

Polarizing plate

TFT Cell CF Polarizing plate

OLED LCD

TFT&OLED Polarizing plate

Simple structure with not many

components (without BLU) Paper

slim & light

Self-emitting display

Better response time / contrast

ratio compared to LCD

Indirect light source display, which is

complex and consists of many

components.

Light is supplied from BLU and goes

through many layers

OLED is next generation display which is simple, thin and light. OLED can achieve natural and vivid colors due to self-emitting

characteristics

Copyright 2013 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

Main PCB for Broadband

55EA9800 CAM USBCl S k55EA9800 CAM USBClear Speaker

To PSULocal Dim.

Module 11 Main processor_Digital(LG1152D),

DDR Memory

3

Flash Memory2

3 Micom for Key/IR sensing wifiMotion assy

2Main processor_analog(LG1152A)

4

4

HDMI switch (4:1)

Audio AMP (Max 12W)

Motion assy

Front Spk 5

5IR + Digital Eye

Local Key


H13 Block diagramDIF(P/N)

AUD

BB_TP_DATA

CVBS

DIF(P/N)

SIFTuner

Motion-RM-Remote_Rx/Tx

OPTICSPDIF

LNB

DAC_DATA

AAD_DATAPC AUDIO

PC_Audio_L/R

H13LG1154A

A di

H/PH/P Audio L/R

I2S

CVBS

SCART

SC_CVBS, RGB, Audio L/R

DTV/MNT_LR/V_OUT

H/P AMP

IR_BlasterIRB_SPI IR_B

MicomH13LG1154D

HSR_P/M

_

AV1_Audio L/RAV1

COMP1

AV1_CVBS

Comp1 Y,Pb,Pr

AudioAMP

SPK/Clear Speaker

I2S

HDMISwitchHDMI1~4

HDMI CEC

CICI

HDMI_CEC

RMIIWOL / WOW

FRC

Logo Light

LVDS : Quad

OLED Module

USB1(USB3.0)

USB2(USB2.0)

USB 3.0

USB 2.0

USB 2.0USB_W-iFi

PHYRMII

LANFRC

TCONLVDS : Quad

USB3(USB2.0) USBHUB

16

DDR3

16

DDR3

USB 2.0

USB_CAM

16

DDR3

16

DDR3

8

eMMCDDR3 DDR3 DDR3 DDR3 eMMC

4Gb×4 (1600)


H13 Block diagram

DIFTS (P) System

DGlobal Baseband

H13A H13DVideo Decoder

Multi-STD UART 3

TS(P) TS(P)

GBB AFE1ch@30MHz

DVB-CI/CI+

TS(S)

GPU Rogue Han USB2.0x3

TS(S)SDRAM(MCP)

TunerDemux

Audio DSPMulti-STD

Audio DecoderLX4 HiFi EP

SIF

Global BasebandV/Q, DVB-T/C ISDB-T

AAD(THAT)

Mux

I2S(External)

Multi STDHD Decoder(Boda950)

Audio

2D GFXJPG/PNG Decoder

JPG Encoder

UARTx3

EMACSCI

SPIx2I2Cx10

PHY

1ch@30MHzw/ PLL

BTSC [email protected]

w/ PLLVideo Encoder

1080p@30fps

GPIOx136

Audio L/R(4-ch)

SCART out

SW

Audio DAC (48KHz)Line Out

TrustZone

CPUARMCA9 CoreDual 1.2GHz

Sound DSP

Clear Voice II

PerceptualVolume Control

I2S

I2S(HPD)

CPU

64KB SRAM48KB ROM

OTP

I2Cx10

eMMCDMAC(8ch)

TimerWDT

1ch L/RAudio-ADC

24b@48KHz

USB3.0 x1

Secure EngineAudio DAC (48KHz )

I2S

I2S

SW

CVBS(3ch) CVBSEncoder

32KBI$ 32KBD$

1MB L2 $Slim SPK

DivXBluetooth

Digital AMP

I2S(HPD)

SPDIF

UARTOTP

Timer

SRAM 16KBDigitalAudioOutput

CVBS DAC5x1ch (1ch)

Component(2ch)

CVBS AFE(2-ch)12b@54MHz

CVBS-Out

Mux10x3ch

DEEncoder

LVDSTx e

Mux

R erla

cer

b S

cale

r

D

CR

SW

SW

3ch Video AFE

[email protected]

Rx

CVDY/C

CVBS

BE

DR

CR

E E1

SD D orm

atte

r

ON

MCU

CaptureBlock(3CH)

Mux

/EPI

/LVD

S C

ombo

(120

Hz)

MCU

HDMI-Rx 1.4(1-port PHY) DDR3 Controller

Audio PLLw/ DCO

Sou

rce

TND

e-in

teM

ain/

Sub

H3

VCw/ LLPLL

I2Cx1

H3

DDR3 ControllerSPLL

DDR

DPLL

DDR

FR SR PE

OS

LEO

utpu

t fo

TCO(3CH)

I2Cx1

HDMI(1-Link)

HDMI

Vx1

/

CPLL DCOx2

GPIOIx16

3D, ARC, 4kx2kDDR3 PHY DDR3 PHY

DDRPLL

DDRPLL

16 16 16 16


H13 Block diagram


H13 Block diagram+3.3V D Demod

[+3.3V_TUNER] 5

[+.1.8V_TUNER] 7

+1.23V_D_Demod[+3.3V_S2_DEMOD] 32

+3.3V_NORMAL

3 3K Ω

+1.8_TU+3.3V_TU

_ _

[+1.23V_S2_DEMOD] 30LNB_TX

LNBIC6900

A8303SESTR-TB

10 [TONECTRL]

2 [LNB]

7 [SCL]

8 [SDA]

[S2_F22_OUTPUT] 33[LNB] 36

[S2_SCL] 34[S2_SDA] 35 I2C_SCL4

I2C_SDA4

22 Ω

LNB_OUT

3.3K Ω

TU6503 H13[RESET] 2

/TU_RESET1AG6 [GPIO10]

IC2_SCL6

IC2 SDA6AH34 [SCL5][SLC] 3

[T/C_DIF[N]] 11

AP6 [SCL3]AR6 [SDA3]33 Ω

TU6503TDSQ-H651F

H13LG1154D

IC2_SDA6AH33 [SDA5][SDA] 4

[ERROR] 16[SYNC] 17[VALID] 18[MCLK] 19

AL37 [TP_DVB_ERR]AL36 [TP_DVB_SOP]AL35 [TP_DVB_VAL]AM36 [TP_DVB_CLK]

FE_DEMOD1_TS_ERRORFE_DEMOD1_TS_SYNCFE_DEMOD1_TS_VALFE_DEMOD1_TS_CLK

[D0] 20[D1] 21[D2] 22[D3] 23[D4] 24[D5] 25[D6] 26[D7] 27

FE_DEMOD1_TS_DATA [0-7]

AM35 [TP_DVB_DATA0]AN36 [TP_DVB_DATA1]AN37 [TP_DVB_DATA2]AN35 [TP_DVB_DATA3]AP37 [TP_DVB_DATA4]AP36 [TP_DVB_DATA5]AR37 [TP_DVB_DATA6]AR37 [TP DVB DATA7][D7] 27 AR37 [TP_DVB_DATA7]

[S2_RESET] 31/S2_RESET

AG5 [GPIO9]

[T/C_DIF[P]] 10

[T/C_DIF[N]] 11FILTER

H13LG1154A

IF_P

IF_N

TUNER_SIF

TU_CVBS

IF_AGC

U17 [ADC_I_INP]

V17 [ADC_I_INN]

ADC_I_INP

ADC_I_INN


H13 Block diagram

[CVBS IN3]AV1_CVBS_IN

AV1Phone JACK

AV1_CVBS_IN_SOC

Jack Side SOC Side

[CVBS_IN3]

FULL SCART

(18P)

SC_CVBS_IN[CVBS IN2]

SC_CVBS_IN_SOC

[AUAD_L/R_CH2_IN]

AV_L/R_IN AUAD_L/R_CH2_IN

H13

[CVBS_IN2]SC_R/G/B/CVBS_IN_SOY

COMP1_PR_IN_SOCCOMP1_Y_IN_SOCCOMP1 PB IN SOC

[PR1/Y1/PB1/SOY1_IN]

H13(LG1154A)

[AUAD_L/R_CH3_IN]

COMP1_PB_IN_SOCCOMP1_Y_IN_SOC_SOY

SC_L/R_IN AUAD_L/R_CH3_IN

COMP1_Y/Pb/Pr

Component 1Phone JACK

COMP2_PB_IN_SOCCOMP2_Y_IN_SOC

[PB2/Y2/SOY2/PR2_IN]

COMP2_Y_IN_SOC_SOYCOMP2_PR_IN_SOC

TunerTU_CVBS_IN TU_CVBS_IN_SOC

[CVBS_IN1]SIFDIF[P/N]

TUNER_SIF ADC_I_INP/INN [AAD_ADC_SIF]

[ADC I INP/INN][ _ _ ]


H13 Block diagram

MuteCTRL[TR] C

ART_

MU

TE SCART

MICOM

[AUAD L CH1 IN]

AZ4580MTR OP AMP

[TR]

AV_L/R_IN

SC

AUDIO L/R OUT[AUD_SCART_OUTL/OUTR]

SC_L/R_IN

SCART_Lout/Routpi filter

[DACSCK] MAIN 4P wafer

[ _ _ _ ]

[AUAD_L_CH2_IN]

[AUAD_L_CH3_IN]DTV/MNT_L/R_OUT

TAS5733LPF

I2C_SCL1/SDA1

AUD_SCK/LRCK/LRCH

AMP_RESET_N

[ ][DACLRCK][DACLRCH]

MAIN 4P wafer

H13

[SCL0/SDA0]

LPF[GPIO21]

WOOFER 2P wafer

TAS5733

H13LG1154

LPF

LPF

Tune

r

MICOM

AMP_MUTE

SIDE_HP_MUTETUNER SIF

LPF

[IEC958OUT]

[AAD_ADC_SIF]

HP_L/ROUT_MAIN

HEAD PHONE& line out

_ _

[AUDA_OUTL]

[PHY0_ARC_OUT_0]

TUNER_SIF

TPA6138A2Headphone

AMPLPF

SPDIF_OUT

SPDIF_OUT_ARC


H13 Block diagram

HDMI1HDMI1

CEC_REMOTE

HDMI S/W RESET

TMDS Link 8bits

SPDIF_OUT_ARC

HDMI

HDMI_INT

HDMI_S/W_RESET

HDMI2HDMI2

DDC_I2C 2bits

H13LG1154D

HDMISwitch

(IC3201 / SII9587CNUC)

HDMI Out put 8bits

SPDIF_OUT_ARC HDMI2HDMI2

CEC_REMOTE

TMDS Link 8bits

DDC I2C 2bitI2C_SCL/SDA 5 2bits

HDMI3HDMI3

DDC_I2C 2bits

CEC_REMOTE

TMDS Link 8bits

DDC_I2C 2bitsCEC_REMOTE

HDMI4HDMI4

TMDS Link 8bits

MICOM(IC3000 /

R5F100GEAFB)

OCP(IC3202 /TPS2051)

MHL_DET

CEC_REMOTEDDC_I2C 2bits


H13 Block diagram

USB CAMERA DP / DM CAM DET MICOMUSB_Camera(구주7600 - Ready)

USB_CAMERA_DP / DM

USB3USB_DP3 / DM3

USB HUBUSB2512B-AEZG

USB2_HUB_IC_IN_DP / DM[USB2_2_DP0 / DM0]

CAM_DET MICOM(R5F100GEAFB)

OCP USB2/3TPS2062C

USB_CTL2USB_CTL3

+5V USB2+5V_USB3

USB2_ DP2 / DM2USB2

[USB2_0_DP / DM]

[USB2_1_DP0 / DM0]

USB_WIFIWIFI_DP / DM WOL/WOW_POWER_ON

TPS2062C_

[EB_CS2/GPIO92]+5V_USB2

USB1(USB3.0, PVR Ready)

USB3_DP / DM[USB3_DP0/DM0]

[USB3_RX0P / M][USB3_TX0P / M]

USB3_RX0P/RX0MUSB3_TX0P/TX0M

OCP USB1TPS2554

USB_CTL2[HUB_VBUS_CTRL0]

/USB OCD1+5V_USB1

M_REMOTE_RX / TX

M_REMOTE_CTS / RTS[UART1_RXD / TXD]

[GPIO15 / GPIO18]

M_REMOTE_RESET

Motion RemoteReceiver

[GPIO13]

TPS2554/USB_OCD1[HUB_PORT_OVER0/1]

H13LG1154D

[UART0_RXD]

[UART0_TXD]

MICOM(R5F100GEAFB)

SOC_TX SOC_RX SOC_TX SOC_RX

4Pin debugging Wafer

P3800


Interconnection - 1

55EA9800

[PCBs]

1 Main PCB

2 PSU1

2

3 WIFI ASSY

4 BT MOTION ASSY

5 IR PCB34

6 Touch Key / Logo

5 6


Contents of LCD TV Standard Repair ProcessNo. Error symptom (High category) Error symptom (Mid category) Page Remarks

1 No video/Normal audio 1

2 No video/No audio 2

A. Video error3 Picture broken/ Freezing 3

4 Color error 4

Vertical/Horizontal bar residual image5

Vertical/Horizontal bar, residual image, light spot, external device color error

5

6

B Power error

No power 6

Off h ff hil i iB. Power error7

Off when on, off while viewing, power auto on/off

7

8C. Audio error

No audio/Normal video 8

9 Wrecked audio/discontinuation/noise 9

10 Remote control & Local switch checking 10

MR13 i h ki 11

D. Function error

MR13 operating checking 1111

12 Wifi operating checking 12

13 Camera operating checking 1313 Camera operating checking 13

14 External device recognition error 14

15 E. Noise Circuit noise, mechanical noise 15

16 F. Exterior error Exterior defect 16

First of all, Check whether there is SVC Bulletin in GCSC System for these model.Copyright 2013 LG Electronics. Inc. All right reserved.Only for training and service purposes LGE Internal Use Only

Establisheddate

Standard Repair Process

Revised date 1/16LCD TV Error

symptomA. Video error

No video/ Normal audio

2013.01.31

Revised date 1/16No video/ Normal audio

First of all, Check whether all of cables between board is inserted properly or not.(Main B/D↔ Power B/D, EPI Cable,Speaker Cable,IR B/D Cable,,,)

Normal audio

YNo videoNormal audio

Check OLED LightOn with naked eye On

Y Check Power Board24V, 12V,3.5V etc.

Normal voltage

Y Replace T-con Board or moduleAnd Adjust VCOM

A18A1

N

Move to No video/No audio

N N

Repair Power Board or parts

Check Power Board 24V outputA18

Normalvoltage

Y Replace Inverter or module

N End

Repair Power Board or parts

Always check & record S/W Version and White

※Precaution A4 & A2Always check & record S/W Version and White Balance value before replacing the Main Board Replace Main Board Re-enter White Balance value

1



A. Video errorNo video/ No audio

Establisheddate


symptom2013.01.31

No video/ No audio Revised date 2/16

Check various Check andY

A18

Normalvoltage?

Check various voltages of Power Board ( 3.5V,12V,20V or 24V…)

No Video/No audio

Check and replace MAIN B/D

Y

N End

Replace Power Board and repair parts

2


A. Video errorPicture broken/ Freezing


Establisheddate


symptom2013.01.31

Picture broken/ Freezing

A3 By using Digital signal level meter

Revised date 3/16

A3Check RF Signal level

. By using Digital signal level meter

. By using Diagnostics menu on OSD( Setting→ Set up→ Manual Tuning → Check the Signal )- Signal strength (Normal : over 50%)- Signal Quality (Normal: over 50%)

YNormal Signal?

Check whether other equipments have problem or not.(By connecting RF Cable at other equipment)

→ DVD Player ,Set-Top-Box, Different maker TV etc`

N

N

Check RF Cable Connection Check

DVD Player ,Set Top Box, Different maker TV etc

SVC CheckT ld i

YCloseNormal Y

A4

1. Reconnection2. Install Booster

S/W Version

S/W Upgrade

Bulletin? Tuner soldering

Y

ClosePicture?

Contact with signal distributor

N

Normal N

N

ReplaceMain B/D

Normal Picture?

N

Contact with signal distributoror broadcaster (Cable or Air)

Normal Picture?

Y

Y

Close

Close

3


A. Video errorColor error


Establisheddate


symptom2013.01.31

Color error Revised date 4/16

Color Y

※ Check and replace Link Cable Y

Replace Main B/DColor

Check color by input-External InputCOMPONENT

A6Y

Replace moduleColor

A7

error?

N

(EPI) and contact condition N

Replace Main B/Derror?

Check error

-COMPONENT-AV-HDMI N

End

Replace moduleerror?

color input mode

YExternal device/C bl

External Input/C t

Check external R l M i B/DCh k T t tt

A8/Cablenormal

Componenterror

external device andcable

Replace Main B/D

N

Request repair

Check Test pattern

YExternal deviceCheck external

N

for external device/cable

External device/Cablenormal

HDMIerror

device and cable

Replace Main B/D

4


A. Video errorVertical / Horizontal bar, residual image,

Establisheddate


symptom


2013.01.31

Vertical/Horizontal bar, residual image, light spot

light spot, external device color error

ReplaceModule

Revised date 5/16

Screennormal?

YCheck external deviceconnection

Y Check and replace Link Cable

Normal?NScreen

normal? Replace Main B/D(adjust VCOM)

Check color condition by input-External Input-ComponentHDMI

N

Module

Screennormal?

A6 A7

N

conditionN

Cable

Y

(adjust VCOM)

Replace module

-HDMI

EndRequest repair for external A8

Y

Replace Main B/D

For LGD panel

End

deviceA8

External device screen error-Color error

Check Test pattern For other panel

External Inputerror

Connect other external device and cable

NReplaceScreen

Check screen condition by input-External Input-Component-HDMI/DVI

Check S/W Version NCheckversion

(Check normal operation of External Input, Component, RGB and HDMI/DVI by connecting Jig, pattern Generator ,Set-top Box etc.

Y

Replace Main B/Dnormal?

Request repair for

Componenterror

Y

S/W Upgrade

external device

HDMI/DVI

Connect other external device and cable(Check normal operation of E t l I t C t

Replace Main B/D

Screennormal?

N

YNNormal

screen?External Input, Component, RGB and HDMI/DVI by connecting Jig, pattern Generator ,Set-top Box etc.

Main B/Dnormal?Y

End5


B. Power errorNo power


Establisheddate


symptom2013.01.31

No power

DC Power on N R lA17 A18

Revised date 6/16

Power LEDOn?

Y

N

DC Power onby pressing Power Key On Remote control

Y

NNormal operation?

Check Power On ‘”High”

Check Power cord

Check Logo LED

Replace Power B/D

YOK?

Replace Main B/D

. Stand-By: Red or Turn Off

. Operating: Turn OffCheck Power cordwas inserted properly

Measure voltage of each output of Power B/D

Replace Main B/D

NNormal?

A18

YNormalvoltage?

Replace Main B/D

YY

※

N

g

Check ST-BY 3.5V

Replace Power B/DN

YNormal

voltage?

A18

Close

Replace Power B/D

6


B. Power errorOff when on off while viewing power auto on/off

Establisheddate


symptom


2013.01.31

Off when on, off while viewing, power auto on/off

Check outlet

A19

Revised date 7/16

Error?N Check Power Off

ModeCheck A/C cord

Check for all 3- phase

Replace Main B/DCPUAbnormal

N

YNormal? End

Y

Fix A/C cord & Outlet and check each 3

Check for all 3- phasepower out

(If Power Off mode

Replace Power B/D

A18

Abnormal 1

phase out (If Power Off mode is not displayed)Check Power B/D voltage

Y

N

Replace Main B/DNormalvoltage?

※ CautionCh k d fi i Replace Power B/DCheck and fix exterior of Power B/D Part

Status Power off List Explanation

"POWEROFF REMOTEKEY" P ff b REMOTE CONTROL* Please refer to the all cases which

N l

"POWEROFF_REMOTEKEY" Power off by REMOTE CONTROL

"POWEROFF_OFFTIMER" Power off by OFF TIMER

"POWEROFF_SLEEPTIMER" Power off by SLEEP TIMER

"POWEROFF_INSTOP" Power off by INSTOP KEY

"POWEROFF_AUTOOFF" Power off by AUTO OFF

"POWEROFF ONTIMER" P ff b ON TIMER

can be displayed on power off mode.

Normal "POWEROFF_ONTIMER" Power off by ON TIMER

"POWEROFF_20V_DET" Power off by AC OFF

"POWEROFF_RESREC" Power off by Reservated Record

"POWEROFF_RECEND" Power off by End of Recording

"POWEROFF_SWDOWN" Power off by S/W Download

"POWEROFF UNKNOWN" P ff b k t t t li t d

7

"POWEROFF_UNKNOWN" Power off by unknown status except listed case

Abnormal"POWEROFF_ABNORMAL1" Power off by abnormal status except CPU trouble

"POWEROFF_CPUABNORMAL" Power off by CPU Abnormal


C. Audio errorNo audio/ Normal video

Establisheddate


symptom


2013.01.31

No audio/ Normal video Revised date 8/16

No audioScreen normal

Check user menu > Speaker off

OffN Check audio B+ 24

of Power Board Normalvoltage

Y

A20 A21+A18

Speaker off

Y

Cancel OFF

N

Replace Power Board and repair parts

Check Speaker

NReplace MAIN Board EndDisconnection

disconnection

Y

Replace Speaker

8


C. Audio errorWrecked audio/ discontinuation/noise

Establisheddate


symptom


2013.01.31

→ abnormal audio/discontinuation/noise is same after “Check input signal” compared to No audio

Wrecked audio/ discontinuation/noise Revised date 9/16

A21+A18Wrecked audio/Discontinuation/

Noise for all audio

Check and replace speaker and connector

YCheck input signal-RF Signal Y

Check audio B+ Voltage (24V)

A21+A18

Wrecked audio/Discontinuation/

Noise only for D-TV

N

Normalvoltage?

-RF-External Inputsignal

normal?

Replace Main B/DN


Noise only for Analog

Replace Power B/D

(When RF signal is not received)


Noise only for External Input

Connect and checkN

Normal

received)Request repair to external cable/ANT provider

Replace Main B/D

(In case of

End

Connect and check other external device

Y

Normalaudio?

Check and fix external device

External Input signal error)Check and fix external device

Check and fix external device

9


D. Function errorRemote control & Local switch checking


Establisheddate


symptom2013.01.31

Remote control & Local switch checking

1. Remote control(R/C) operating errorA22 A22

ReplaceMain B/D

A22

Revised date 10/16

Y

N

Check R/C itself Operation

Normaloperating?

Y

Check & RepairCable connectionConnector solder

Normaloperating?

Check B+ 3.5V

On Main B/D

NormalVoltage?

N

A18

Check IROutput signal

NormalSignal?

N

Y

N

A22Y

Check R/C OperatingWhen turn off light

in room

Check & ReplaceBaterry of R/C

Close Check 3.5v on Power B/DReplace Power B/D or

Replace Main B/D(Power B/D don’t have problem)

A18Repair/Replace

IR B/D

Normaloperating? CloseIf R/C operate,

Explain the customer cause is interferencefrom light in room. N

Y

Replace R/C

10


D. Function error

MR13/P operating checking


Establisheddate


symptom2013.01.31

MR13/P operating checking

2. MR13/P (Magic Remocon) operating error

Revised date 11/16

A4

Y

N

Check MR13/P itself Operation

Normaloperating?

Y

Is show ok message?

Press the wheel

N Turn off/on the set and press

the wheel

Check the INSTART menu

RF Receiver ver is “00.00”?

Y

N

Check & ReplaceBattery of MR13/P

Close

Y

Check & Repair RF assy

connection

A23

Normaloperating? Close

Is show ok message?

N

N Press the back key about 5sec

Y

RF Receiver ver NCl

A4

NY

Replace MR13

y

CloseY

is “00.00”? Close

•If you conduct the loop at 3times, change the MR13/P.

Down load the Firmware

* INSTART MENU 02.11Remocon Test 3. Firmware

downloaddownload

11


D. Function errorWifi operating checking


Establisheddate


symptom2013.01.31

Wifi operating checking

3.Wifi operating error

Revised date 12/16


Wi-Fi Mac value is “NG”?

N Check the Wifi wafer1pin

NormalVoltage?

N ReplaceMain B/D

A24A4

Y

Check & Repair Wifi cable

Close

YA24

connection

A4Wi-Fi Mac value

is “NG”?N

Close

A4

Change the Wifi assy

Y

12


D. Function errorCamera operating checking


Establisheddate


symptom2013.01.31

Camera operating checking

4.Camera operating error

Revised date 13/16


Camera Ver. is “NG”?

N Check the Camera waferP4200 2pin

NormalVoltage?

N ReplaceCamera B/D

A25A4

Y

Check & Repair Camera cable

Close

YA25

connection

A4Camera Ver.

is “NG”?N

Close

A4

Change the Camera assy

Y

13


D. Function errorExternal device recognition error

Establisheddate


symptom


2013.01.31

External device recognition error Revised date 14/16

Check technical information- Fix information- S/W Version

NTechnical information?

Check input signal

Signalinput?

Y External Input andComponent

Recognition errorReplace Main B/D

S/W VersionYN

Check and fix external device/cable

HDMI/DVI, Optical

Recognition errorReplace Main B/DFix in

accordance with technical information

14


E. Noise Circuit noise mechanical noise

Establisheddate


symptom


2013.01.31

Circuit noise, mechanical noise Revised date 15/16

Check location of

Identify nose Circuit

noise Replace PSUnoisetype noise

Mechanical noise

Check location of noisenoise noise

※ When the nose is severe, replace the module(For models with fix information, upgrade the S/W or provide the description)

※ M h i l i i t lp p )

OR

※ If there is a “Tak Tak” noise from the cabinet, refer to the KMS fix information and then proceed as shown in the solution manual(For models without any fix information, OR

※ Mechanical noise is a natural phenomenon, and apply the 1st level description. When the customer does not agree, apply the process by stage. ※ Describe the basis of the description i “P t l t d t ” i th O ’

( y ,provide the description)in “Part related to nose” in the Owner’s

Manual.

15


F. Exterior defectExterior defect

Establisheddate


symptom


2013.01.31

Exterior defect Revised date 16/16

Z i h Replace moduleZoom part with exterior damage

Moduledamage

CabinetCabinetdamage Replace cabinet

Replace remote controllerRemote

controller Replace remote controllercontrollerdamage

Standdent Replace standdent ep ace sta d

16


Contents of LCD TV Standard Repair Process Detail Technical Manual

No. Error symptom Content Page Remarks

1 A Video error No video/Normal Check LCD back light with naked eye A1A. Video error_ No video/Normal audio 2 Check White Balance value A2

4

A Video error video error /Video

TUNER input signal strength checking method

A3

A. Video error_ video error /Video lag/stop5 LCD-TV Version checking method A4

6 Tuner Checking Part A5

7A. Video error Vertical/Horizontal bar,

LCD TV ti di A67A. Video error _Vertical/Horizontal bar, residual image, light spot

LCD TV connection diagram A6

8A. Video error_ Color error

Check Link Cable (EPI) reconnection condition

A7

9 Adj A J K A89 Adjustment Test pattern - ADJ Key A8

10

<Appendix>

Exchange Main Board (1) A-1/5

11 Exchange Main Board (2) A-2/5Appendix

Defected Type caused by T-Con/ Inverter/ Module

12 Exchange Power Board (PSU) A-3/5

13 Exchange Module (1) A-4/5

14 Exchange Module (2) A-5/514 Exchange Module (2) A 5/5

Continue to the next page


Contents of LCD TV Standard Repair Process Detail Technical Manual

No. Error symptom Content Page Remarks

Continued from previous page

16B. Power error_ No power

Check front display LED A17

17 Check power input Voltage & ST-BY 3.5V A18

18B. Power error_Off when on, off

hil i iPOWER OFF MODE checking method A1918

while viewingPOW R OFF MO checking method A19

19C. Audio error_ No audio/Normal video

Checking method in menu when there is no audio

A20

20Voltage and speaker checking method

A2120Voltage and speaker checking method when there is no audio

A21

21Remote controller operation checking method

A22

D. Function error22Motion Remote operation checking method

A23

23 Wifi operation checking method A24

24 Camera operation checking method A2524 Camera operation checking method A25

25 E. Etc Tool option changing method A26


Established date

Standard Repair Process Detail Technical Manual

Revised A1

Error symptom

Content Check LCD back light with naked eye

A. Video error_No video/Normal audio LCD TV2013.01.31

date A1Content Check LCD back light with naked eye

After Remove the Rear Cover, turning on the power and disassembling the case, check with the naked eye.

A1


Established date


Revised A2

Error symptom

Content Check White Balance value

A. Video error_No video/Normal audio LCD TV2013.01.31

date A2Content Check White Balance value

Entry methodEntry method

1. Press the ADJ button on the remote controller for adjustment.

2. Enter into White Balance of item 6.

3 Aft di th R G B (GAIN C t) l f C l T

1. Press the ADJ button on the remote controller for adjustment.

2. Enter into White Balance of item 9.

A2

3. After recording the R, G, B (GAIN, Cut) value of Color Temp (Cool/Medium/Warm), re-enter the value after replacing the MAIN BOARD.

3. After recording the R, G, B (GAIN, Cut) value of Color Temp (Cool/Medium/Warm), re-enter the value after replacing the MAIN BOARD.



TUNER input signal strength checking method

A. Video error_Video error, video lag/stop

A3

Established date

Revised

Error symptom

ContentLCD TV

2013.01.31

TUNER input signal strength checking method A3date Content

Settings Channel Manual Tuningselect channel

When the signal is strong, use the attenuator (-10dB -15dB -20dB etc )attenuator ( 10dB, 15dB, 20dB etc.)

A3



LCD TV Version checking method


A4

Established date

Revised

Error symptom

ContentLCD TV

2013.01.31

LCD-TV Version checking method

1. Checking method for remote controller for adjustment

A4date Content

Version

Press the IN-START with the remote t ll f dj t tcontroller for adjustment

A4



TUNER checking part


A5

Established date

Revised

Error symptom

ContentLCD TV

2013.01.31

TUNER checking part A5date Content

Checking method: 1. Check the signal strength or check whether the screen is normal when the external device is connected. 2. After measuring each voltage from power supply, finally replace the MAIN BOARD. g g p pp y, y p

A5



LCD TV ti di (1)

A. Video error _Vertical/Horizontal bar, residual image, light spot

A6

Established date

Revised

Error symptom

ContentLCD TV

2013.01.31

LCD TV connection diagram (1) A6date Content

As the part connecting to the external input, check the screen condition by signal

A6



Ch k Li k C bl (EPI) ti diti

A. Video error_Color error

A7

Established date

Revised

Error symptom

ContentLCD TV

2013.01.31

Check Link Cable (EPI) reconnection condition A7date Content

Check the contact condition of the Link Cable, especially dust or mis insertion.

A7



Adjustment Test pattern ADJ Key

A. Video error_Color error

A8

Established date

Revised

Error symptom

ContentLCD TV

2013.01.31

Adjustment Test pattern - ADJ Key A8date Content

You can view 6 types of patterns using the ADJ Key

Checking item : 1. Defective pixel 2. Residual image 3. MODULE error (ADD-BAR,SCAN BAR..)4.Video error (Classification of MODULE or Main-B/D!)

A8


Appendix : Exchange the Module (1)

수직 비내림 Line DimBrightness difference

CrosstalkCrosstalk Press damage

Un-repairable CasesIn this case please exchange the module.p g

Burnt

A – 1/2


Appendix : Exchange the Module (2)

Angle view Color difference Brightness dot noise Half dead

Green Noise on power on/off time Line DefectBrightness difference

Un-repairable CasesIn this case please exchange the module.p g

Mura

A – 2/2



Ch k f t di l L

B. Power error _No powerA17

Established date

Revised

Error symptom

ContentLCD TV

2013.01.31

Check front display Logo A17date Content

ST-BY condition: On or OffPower ON condition: Turn Off

Front LED control :Menu Option Standby Light

A17

Standby LightON/ Off


Established date


Revised A18

Error symptom

Content Check power input voltage and ST BY 3 5V

B. Power error _No powerLCD TV

2013.01.31

date A18Content Check power input voltage and ST-BY 3.5V

Check the DC 24V 12V 3 5VCheck the DC 24V, 12V, 3.5V.

18 Pin (Power Board ↔ Main Board)

1 Power on 2 DRV ON

3 3.5V 4 20V

5 3 5V 6 N C5 3.5V 6 N.C

7 GND 8 GND

9 24V 10 24V

11 GND 12 GND11 GND 12 GND

13 12V 14 12V

15 12V 16 24V

17 GND 18 GND17 GND 18 GND

A18



POWER OFF MODE h ki th d

B. Power error _Off when on, off whiling viewing

A19

Established date

Revised

Error symptom

ContentLCD TV

2013.01.31

POWER OFF MODE checking method A19date Content

Entry method

1. Press the IN-START button of the remote controller for adjustment

2. Check the entry into adjustment item 3

A19



Ch ki th d i h th i di

C. Audio error_No audio/Normal video

A20

Established date

Revised

Error symptom

ContentLCD TV

2013.01.31

Checking method in menu when there is no audio A20date Content

Checking method1. Press the Setting button on the remote controllerg

2. Select the Sound function of the Menu

3. Select the Sound Setting

4. Select TV Speakerp

A20



Voltage and speaker checking method

C. Audio error_No audio/Normal video

A21

Established date

Revised

Error symptom

ContentLCD TV

2013.01.31

Voltage and speaker checking method when there is no audio A21date Content

①

③

①

②

24 Pin (Power Board ↔ Main Board)

1 Power on 2 INV ON3 3.5V 4 PDIM#15 3.5V 6 PDIM#27 GND 8 GND9 24V 10 24V

③

11 GND 12 GND13 12V 14 12V15 12V 16 24V17 GND 18 GND19 GND 20 GND21 GND 22 L/DIM0_V823 L/DIM0_MOSI 24 L/DIM0_SCLK

Checking order when there is no audio

① Check the contact condition of or 24V connector of Main Board①

② Measure the 24V input voltage supplied from Power Board(If there is no input voltage, remove and check the connector)

③ Connect the tester RX1 to the speaker terminal and if you hear the Chik Chik sound when you touch the GND and output terminal, the speaker is normal.

A21


Standard Repair Process Detail Technical ManualD. Function error

A22

Established date

Revised

Error symptom

ContentLCD TV

2013.01.31

P4002

1 KEY2

Remote controller operation checking method A22date Content

③1 KEY2

2 +3.5V_ST

3 GND

4 LOGO Light Wafer

5 IR5 IR

6 GND

7 EYE SCL

8 EYE SDA

① ②

Checking orderg

1, 2. Check Touch cable condition between Touch & Main board.3. Check the st-by 3.5V on the terminal 4,7.4. When checking the Pre-Amp when the power is in ON condition, it is normal when the

Analog Tester needle moves slowly and defective when it does not move at allAnalog Tester needle moves slowly, and defective when it does not move at all.

A22



M ti R t ti h ki th d

Established date

Revised

Error symptom

ContentLCD TV

A23

D. Function error 2013.01.31

P4003

1 3 5V WOL

Motion Remote operation checking method date Content

③

A23

1 +3.5V_WOL

2 +3.3V

3 USB_DM

4 RTS

5 USB DP

③

5 USB_DP

6 RX

7 GND

8 TX

9 WOL9 WOL

10 RESET

11 GND

12 CTS

②

13 NC

14 +3.5V_ST(OLED)

15 IR(OLED)

16 GND

①

16 GND

17 EYE_SCL

18 EYE_SDA

Checking order

1, 2. Check Motion cable condition between Motion assy & Main board.3. Check the 3.3V on the terminal 2.

A23



A24

Established date

Revised

Error symptom

ContentLCD TV D. Function error 2013.01.31

Wifi operation checking method A24date Content

P4003

1 3 5V WOL③ 1 +3.5V_WOL

2 +3.3V

3 USB_DM

4 RTS

5 USB DP

③

5 USB_DP

6 RX

7 GND

8 TX

9 WOL9 WOL

10 RESET

11 GND

12 CTS

②

13 NC

14 +3.5V_ST(OLED)

15 IR(OLED)

16 GND

①

Checking order

16 GND

17 EYE_SCL

18 EYE_SDA

Checking order

1, 2. Check Wifi cable condition between Wifi assy & Main board.3. Check the 3.3V on the terminal 2.

A24



A25

Established date

Revised

Error symptom

ContentLCD TV D. Function error 2013.01.31

Camera operation checking method A25date Content

P4200

1 CAM SLIDE DET1 CAM_SLIDE_DET

2 +3.5V_CAM

3 AUD_LRCH

4 AUD_LRCK

5 AUD SCK

①

5 AUD_SCK

6 GND

7 CAM_PWR_ON_CMD

8 ST_BY_DET_CAM

9 GND9 GND

10 USB_CAMERA_DP

11 USB_CAMERA_DM

12 GND

②

Checking orderChecking order

1, 2. Check Camera cable condition between Camera assy & Main board.3. Check the 3.5V on the terminal 2.

A25



T l ti h i th d A26

Established date

Revised

Error symptom

ContentLCD TV E. Etc 2013.01.31

Tool option changing method A26date Content

②

①

Changing method

1. Contact the USB memory. (USB 1,2,3 jack)

2. Enter the password. (ex. 000000)

* Access USB Memory has each password.

A26


North/Latin America Europe/Africa...

Documents

Transcript of North/Latin America Europe/Africa...