NORSOK M·650 o MRC·.~ - IPP Group CERTIFICATION.pdf · The manufacturer and this QTR are...
3
MRC · .~ ENERGY , PIPING o ~E!i'!,~~K1SP') Qualification Test Record OTR. No.: NORSOK M·650 Edition 4 ate-cot Rev. No.: 005 Manufacturer name/address! IPP Scam ark Ltd Web page: Barton Business Park, Barton-Under-Needwood, Staffordshire, OE13 8BX, UK www.ippgrp.com Reference standard NORSOK M-650 Edition 4 Material designation and MDS ASTM A815 UNS S31803. NORSOK M-630 Edition 6 MOS 043 Revision 5 No.: Manufacturing summary doc. 001 Rev. No.: 06 No.: Tees - W' to 6" up to 21.95mm thick & 8" + 10" up to 21.44mm thick Products and manufacturing Elbows - W' to 6" up to 21.95mm thick & 8" + 10" up to 22.23mm thick process(es): End Caps -1" to 20" up to 35.71mm thick Concentric & Eccentric Reducers - (3/4"x1/2") to (12"x10") up to 33.32mm thick Mandatory conditions and sub- Heat treatment carried out Internally. contractors: Approved Furnaces: 1 & 2 Other Information: Laboratory Tests Conducted by 3rdParty ISO 17025 Approved Supplier. Tested and Qualified Thickness and Weight Products and Tested thickness Qualified thickness Testpiece weight Qualified Weight manufacturing Test record No. processtes): (mm) (mm) (kg) (kg) Seamless cold formed OUALTS001 18.23 22.80 NA NA 6" Sch160 Equal Tee Seamless cold formed OUALTS001 18.23 22.80 NA NA 6" Sch160 Elbow Seamless cold formed OTEC001 30.00 37.50 NA NA 8" x 30mm wr End Cap Seamless cold formed OTREOO1 23.01 28.76 NA NA 8"x4" Sch160 Ecc Red Seamless cold formed OTRE001 28.58 35.73 NA NA 12x10" 28mm x Sch160 Con Red Qualification/acceptance signatures Manufacturer: ""'pared b~'2.08.2014 Checked by/Date: 12.08.2014 A.Ri9bY~ ~ IPP Scomark Ltd p.~en Technical c or Tf;chnlcal Director Remarks/Special remarks: 1. The manufacturer and this OTR are evaluated and found to be in compliance with the requirements of NORSOK M-650 for supply of the above listed products and materials. 2. This acceptance does not exempt any purchaser from his responsibility to ensure that this qualification is valid for his products within the essential variables of NORSOK M-650. 3. This qualification is executed and accepted by MRC Energy Piping as "Oualifylng Company" solely for the supply of the above listed products to MRC Energy Piping as ·Purchaser", and MRC Energy Piping assumes no liability for the use of or reliance on this qualification/ acceptance by other purchasers. 4. In accordance with MRC Energy Piping Internal routines and procedures, the validity of the qualification/acceptance is 1 year from the inlUai signing of the OTR front sheet, after which the qualification/acceptance is subject to annual verification and renewal. QUallfie1tlrAC (qne~e/address): Initial approval date: 19.09.2012 , PIPING Expiry date (annual rene~ 19.09.2015 Gamle Forusveien 53 Signature: /." NO-4033 STAVANGER l Jt1'~ e "011 ...... · cj,,:.:s;. ~ .. Note: This QTR IS updated to Rev.OOSto mclude additional qualification testmg of cap and reducer (due dates 12.08.20 14 by IPP), however original approval date 19.09.2012 remain for this renewaV extension of approval.
Transcript of NORSOK M·650 o MRC·.~ - IPP Group CERTIFICATION.pdf · The manufacturer and this QTR are...
MRC· .~ENERGY, PIPING
o~E!i'!,~~K1SP')Qualification Test Record OTR. No.:
NORSOK M·650 Edition 4ate-cotRev. No.:005
Manufacturer name/address! IPP Scam ark LtdWeb page: Barton Business Park, Barton-Under-Needwood, Staffordshire, OE13 8BX, UK
www.ippgrp.com
Reference standard NORSOK M-650 Edition 4
Material designation and MDS ASTM A815 UNS S31803. NORSOK M-630 Edition 6 MOS 043 Revision 5No.:Manufacturing summary doc. 001 Rev. No.: 06No.:
Tees - W' to 6" up to 21.95mm thick & 8" + 10" up to 21.44mm thickProducts and manufacturing Elbows - W' to 6" up to 21.95mm thick & 8" + 10" up to 22.23mm thickprocess(es): End Caps -1" to 20" up to 35.71mm thick
Concentric & Eccentric Reducers - (3/4"x1/2") to (12"x10") up to 33.32mm thickMandatory conditions and sub- Heat treatment carried out Internally.contractors: Approved Furnaces: 1 & 2
Other Information: Laboratory Tests Conducted by 3rdParty ISO 17025 Approved Supplier.
Tested and Qualified Thickness and WeightProducts and Tested thickness Qualified thickness Testpiece weight Qualified Weightmanufacturing Test record No.processtes): (mm) (mm) (kg) (kg)
Seamless cold formed OUALTS001 18.23 22.80 NA NA6" Sch160 Equal Tee
Seamless cold formed OUALTS001 18.23 22.80 NA NA6" Sch160 Elbow
Seamless cold formed OTEC001 30.00 37.50 NA NA8" x 30mm wr End Cap
Seamless cold formed OTREOO1 23.01 28.76 NA NA8"x4" Sch160 Ecc Red
Seamless cold formed OTRE001 28.58 35.73 NA NA12x10" 28mm x Sch160
Con RedQualification/acceptance signatures
Manufacturer: ""'pared b~'2.08.2014 Checked by/Date: 12.08.2014
A.Ri9bY~
~IPP Scomark Ltd
p.~enTechnical c or Tf;chnlcal Director
Remarks/Special remarks:1. The manufacturer and this OTR are evaluated and found to be in compliance with the requirements of NORSOK M-650 for supply of
the above listed products and materials.2. This acceptance does not exempt any purchaser from his responsibility to ensure that this qualification is valid for his products within
the essential variables of NORSOK M-650.3. This qualification is executed and accepted by MRC Energy Piping as "Oualifylng Company" solely for the supply of the above listed
products to MRC Energy Piping as ·Purchaser", and MRC Energy Piping assumes no liability for the use of or reliance on thisqualification/ acceptance by other purchasers.
4. In accordance with MRC Energy Piping Internal routines and procedures, the validity of the qualification/acceptance is 1 year from theinlUai signing of the OTR front sheet, after which the qualification/acceptance is subject to annual verification and renewal.
QUallfie1tlrAC (qne~e/address): Initial approval date: 19.09.2012, PIPING Expiry date (annual rene~ 19.09.2015
Gamle Forusveien 53 Signature: /."NO-4033 STAVANGER l Jt1'~ e "011 ......· cj,,:.:s;. ~..Note: This QTR IS updated to Rev.OOSto mclude additional qualification testmg of cap and reducer (due dates 12.08.20 14 by IPP), however
original approval date 19.09.2012 remain for this renewaV extension of approval.
M R C· ". ENERGY" PIPING
o~~~..!!K.iSPQ
Qualification Test Record OTR. No.:
NORSOK M·650 Edition 4OTR-002
Rev. No.:005
Manufacturer name/address!IPP Scomark LtdBarton Business Park, Barton-Under-Needwood, Staffordshire, DE13 BBX, UKWeb page:www.ippgrp·com
Reference standard NORSOK M-650 Edition 4
Material desIgnation and MDS A5TM A403 UNS S31254. NORSOK M630 Edition 6 MDS R13 Revision 5No.:Manufacturing summary doc. 6Mo01 Rev. No.: 06No.:
Tees - W' to 6" up to 14.27mm thick & 8" + 10" up to 12.7mm thickProducts and manufacturing Elbows - W' to 6" up to 14.27mm thick & 8" + 10" up to 15.06mm thickprocess(es): End Caps - 1" to 20" up to 35.71mm thick
Concentric & Eccentric Reducers - (3/4"x1/2") to (12x10") up to 28.76mm thickMandatory conditions and sub- Heat treatment carried out internally.contractors: Approved Furnaces: 1 & 2.
Other Information: Laboratory Tests Conducted by 3rdParty ISO 17025 Approved Supplier.
Tested and Qualified Thickness and WeightProducts and Test recon: No. Tested thickness Qualified thickness Test piece weight, Qualified weightmanufacturing (mm) (mm) (kg) (kg)process(es):
Seamless cold formed QUALTSOO2 14.27 17.80 NA NA6" Sch120 Equal Tee
Seamless cold formed QUALTSOO2 14.27 17.80 NA NA6" Sch120 Elbow
Seamless cold formed QTECOO2 30.00 37.50 NA NA8" x 30mm WT End Cap
Seamless cold formed QTREOO2 23.01 28.76 NA NAanx4" Sch160 Ecc Red
Qualification/acceptance signaturesManufacturer; Prepared bylDate:12.08.2014 Checked by/Date: 12.08.2014
IPP Scomark Ltd
.~Ci2
A Rigby P.TolenTechnical Technical Director
Remarks/Special remarks:1. The manufacturer and thIs QTR are evaluated and found to be In compliance with the requirements of NORSOK M-650 for supply of
the above listed products and materials.2. This acceptance does not exempt any purchaser from his responsibility to ensure that this qualification Is valid for hIs products within
the essential variables of NORSOK M-650.3. This qualification is executed and accepted by MRC Energy Piping as "Qualifying Company" solely for the supply of the above listed
products to MRC Energy PipIng as ·Purchaser". and MRC Energy PipIng assumes no liability for the use of or reliance on thisqualificatlonl acceptance by other purchasers.
4. In accordance with MRC Energy PipIng Internal routines and procedures. the validity of the qualification/acceptance is 1 year from theinitial Signing of the QTR front sheet. after which the qualification/acceptance is subject to annual verification and renewal.
Qualified/Accepted by (company name/address): Initial approval date: 19.09.2012
MRC' ..~ENERGY Expiry date (annual renewal): 19.09.2015, PIPING Signature:
Gamle Forusveien 53
tJt1'7( JP~ ~~NO-4033 STAVANGER
..Note: TIns QTR IS updated to Rcv.005 to Include additional qualification testing of cap and reducer (due dates 12.08.2014 by IPP). howeveroriginal approval date 19.09.2012 remain for this renewal/ extension of approval.
MRC···ENERGY, PIPING
G~~!\'~'!.~.J.SPllQualification Test Record OTR. No.:
NORSOK M..650 Edition 4OTR-003
Rev. No.:005
Manufacturer name/address!IPP Scomark LtdBarton Business Park, Barton-Under-Needwood, Staffordshire. OE13 SBX. UKWeb page:www.ippgrp.com
Reference standard NORSOK M-650 Edition 4
Material desIgnatIon and MDS ASTM AS15 UNS S32760 NORSOK M630 Edition 6 MOS 053 Revision 5No.:Manufacturing summary doc. S001 Rev. No.: 06No.:
Tees - W' to 6" up to 21.95mm thick & 8" + 10" up to 21.44mm thickProducts and manufacturing Elbows - W' to 6" up to 21.95mm thick & S" + 10" up to 22.23mm thickprocessies): End Caps -1" to 20" up to 35.71mm thick
Concentric & Eccentric Reducers - (3/4"x1/2") to (12x1 Oil) up to 2S.76mm thickMandatory conditions and sub- Heat treatment carried out internally.contractors: Approved Furnaces: 1 & 2
Other Information: Laboratory Tests Conducted by 3m Party ISO 17025 Approved Supplier.
Tested and Qualified Thickness and WeightProducts and Test record No. Tested thickness Qualified thickness Test piece weight Qualified weightmanufacturing (mm) (rom) (kg) (kg)orocess(es):
Seamless cold formed QUALTS003 18.23 22.BO NA NA6" Sch160 Equal Tee
Seamless cold formed QUALTS003 18.23 22.BO NA NA6" Sch160 Elbow
Seamless cold formed QTECOO3 30.00 37.50 NA NA8" x 30mm WT End Cap
Seamless cold formed QTREOO3 23.01 28.76 NA NA8"x4" Sch160 Ecc Red
Qualification/acceptance signaturesManufacturer: Prepared by/Date:12.0B.2014 Checked bylDate: 12.08.2014
( 4 ~IPP Scomark Ltd
A.R19bYI'~ P. TolenTechnIcal· rector Technical Director
Remarks/Special remarks:1. The manufacturer and this QTR are evaluated and found to be in compliance with the requirements of NORSOK M-650 for supply of
the above listed products and materials.2. This acceptance does not exempt any purchaser from his responsibility to ensure that this qualification is valid for his products within
the essential variables of NORSOK M-650.3. This qualification is executed and accepted by MRC Energy Piping as "Qualifying Company" solely for the supply of the above listed
products to MRC Energy Piping as "Purchaser', and MRC Energy Piping assumes no liability for the use of or reliance on thisqualificationl acceptance by other purchasers.
4. In accordance with MRC Energy Piping internal routines and procedures. the validity of the qualification/acceptance Is 1 year from theInitial Signing of the QTR front sheet. after which the qualificationlacceptance Is subject to annual verification and renewal.
Qualified/Accepted by (company name/address): Initial approval date: 19.09.2012Expiry date (annual renewal): 19.09.2015MRC' .~ENERGY Signature:
, PIPING
~~~
Gamle Forusveien 53NO-4033 STAVANGER
..Note: This QTR IS updated to Rev.OOSto include additional qualification testing of cap and reducer (due dates 12.08.2014 by IPP). howeveroriginal approval date 19.09.2012 remain for this renewal/ extension of approval.
