Norris Sucker Rod Coiled Rod Comparison Guide G001 V01 072308
3
-
Upload
hamed-gerami -
Category
Documents
-
view
63 -
download
2
description
Norris Sucker Rod Coiled Rod Comparison Guide G001 V01 072308
Transcript of Norris Sucker Rod Coiled Rod Comparison Guide G001 V01 072308
Stee
l Suc
ker R
od, P
ony
Rod
and
Coile
d Ro
d Co
mpa
rison
Cha
rt
Steel Sucker Rods and Pony Rods
Manufacturer Type AISI SeriesChemical Properties, % Physical Properties1
Aluminum (Al)
Carbon(C)
Chromium(Cr)
Copper(Cu)
Manganese(Mn)
Molybdenum(Mo)
Nickel(Ni)
Niobium(Nb)
Phosphorus(P)
Silicon(Si)
Sulfur(S)
Vanadium(V)
Tensile Yield Elongation Reduction in Area Rockwell Hardness HRC2 Heat Treatment
API Class C ksi (Mpa) ksi (Mpa) 8”, % %Norris 30 C-1536-M 0.35 Max. 0.3 / 0.39 0.3 Max. 0.35 Max. 1.1 / 1.4 0.06 Max. 0.35 Max. --- 0.04 Max. 0.15 / 0.35 0.045 Max. 0.02 / 0.07 90 / 115 (621 / 793) 60 Min. (414 Min.) 15 Min. 45 Min. (9) / 23 NormalizedGlobal Energy Products C60 35Mn2A --- 0.32 / 0.39 0.35 Max. --- 1.4 / 1.8 --- 0.3 Max. --- 0.025 Max. 0.17 / 0.37 0.025 Max. --- 100 / 115 (689 / 793) 90 / 105 (620 / 723) 13 Min. --- (14) / 23 Quenched & TemperedLaxmi Udyog LS1 C1536 --- 0.3 / 0.39 Trace --- 1.1 / 1.4 Trace --- --- 0.04 Max. 0.15 / 0.35 0.04 Max. --- 90 / 115 (621 / 793) 60 Min. (414 Min.) 15 Min. 45 Min. (9) / 23 Induction Heating NormalizedPCC Cameron C Steel Series, Chemical and Physical Properties and Heat Treatment UnavailableSBS Cameron VM5 1536 --- 0.28 / 0.4 --- --- 1.2 / 1.5 --- --- --- 0.03 Max. 0.15 / 0.35 0.045 Max. --- 90 / 115 (621 / 793) 60 Min. (414 Min.) --- --- (9) / 23 Full Length Heat TreatmentTenaris C 1530M 0.01 / 0.04 0.31 / 0.36 0.2 Max. 0.25 Max. 1.4 / 1.6 0.05 Max. 0.15 Max. --- 0.025 Max. 0.25 / 0.4 0.025 Max. 0.1 / 0.15 90 / 115 (621 / 793) 60 Min. (414 Min.) --- --- (9) / 23 Normalized & TemperedUpco C 1536M --- 0.3 / 0.37 0.25 Max. 0.35 Max. 1.2 / 1.5 0.05 Max. 0.25 Max. --- 0.04 Max. 0.2 / 0.3 0.04 Max. 0.015 / 0.03 90 / 115 (621 / 793) 60 Min. (414 Min.) 14 Min.3 45 Min. (9) / 23 Normalized & TemperedWeatherford C 1536SR --- 0.3 / 0.37 0.25 Max. --- 1.2 / 1.5 0.05 Max. 0.2 Max. --- 0.04 Max. 0.2 / 0.3 0.04 Max. --- 90 / 115 (621 / 793) 60 Min. (414 Min.) 18 Min. 50 Min. (9) / 23 NormalizedWeatherford S60 1029Md --- 0.22 / 0.29 0.2 Max. 0.35 Max. 1.0 / 1.32 0.05 Max. 0.15 Max. --- 0.025 Max. 0.15 / 0.3 0.04 Max. --- 100 / 115 (689 / 793) 90 / 105 (620 / 723) 13 Min. 55 Min. (14) / 23 Quenched & TemperedAPI Class KNorris 40 A-4621-M 0.35 Max. 0.18 / 0.25 0.25 Max. 0.35 Max. 0.6 / 0.8 0.15 / 0.25 1.65 / 2.0 --- 0.035 Max. 0.15 / 0.35 0.035 Max. 0.02 / 0.07 90 / 115 (621 / 793) 60 Min. (414 Min.) 16 Min. 55 Min. (9) / 23 Normalized & TemperedGlobal Energy Products K59 20Ni2MnA --- 0.18 / 0.23 0.35 Max. --- 0.7 / 0.9 0.2 / 0.3 1.65 / 2.0 --- 0.025 Max. 0.17 / 0.37 0.025 Max. --- 100 / 115 (689 / 793) 90 / 105 (620 / 723) 13 Min. --- (14) / 23 Quenched & TemperedLaxmi Udyog LS2 4621 --- 0.18 / 0.25 --- --- 0.6 / 0.8 0.15 / 0.25 1.65 / 2.0 --- 0.035 Max. 0.15 / 0.35 0.035 Max. --- 90 / 115 (621 / 793) 60 Min. (414 Min.) 16 Min. 55 Min. (9) / 23 Induction Heating Normalized & TemperedPCC Cameron K Steel Series, Chemical and Physical Properties and Heat Treatment UnavailableSBS Cameron N2P 4621M --- 0.18 / 0.23 0.25 / 0.35 --- 0.7 / 0.9 0.2 / 0.3 1.65 / 2.0 --- 0.03 Max. 0.15 / 0.3 0.045 Max. --- 90 / 115 (621 / 793) 60 Min. (414 Min.) --- --- (9) / 23 Full Length Heat TreatmentTenaris K 4621M 0.01 / 0.04 0.18 / 0.25 0.3 Max. 0.25 Max. 0.7 / 1.0 0.2 / 0.3 1.65 / 2.0 --- 0.025 Max. 0.15 / 0.3 0.025 Max. --- 90 / 115 (621 / 793) 60 Min. (414 Min.) --- --- (9) / 23 NormalizedUpco K 4620M --- 0.2 / 0.25 0.25 Max. 0.4 Max. 0.75 / 1.0 0.2 / 0.28 1.65 / 2.0 --- 0.035 Max. 0.2 / 0.35 0.04 Max. 0.015 / 0.03 90 / 115 (621 / 793) 60 Min. (414 Min.) 16 Min. 3 40 Min. (9) / 23 Normalized & TemperedWeatherford K 4623 --- 0.2 / 0.25 0.25 Max. --- 0.75 / 1.0 0.2 / 0.3 1.65 / 2.0 --- 0.035 Max. 0.2 / 0.35 0.04 Max. --- 90 / 115 (621 / 793) 60 Min. (414 Min.) 16 Min. 60 Min. (9) / 23 Normalized & TemperedWeatherford S59 46XX --- 0.14 / 0.21 --- --- 0.55 / 0.75 0.2 / 0.3 1.65 / 2.0 --- 0.025 Max. 0.15 / 0.35 0.035 Max. --- 100 / 115 (689 / 793) 90 / 105 (620 / 723) 13 Min. 55 Min. (14) / 23 Quenched & TemperedAPI Class D CarbonNorris 54 C-1541-M 0.35 Max. 0.36 / 0.45 0.3 Max. 0.35 Max. 1.35 / 1.65 0.06 Max. 0.35 Max. --- 0.04 Max. 0.15 / 0.35 0.04 Max. 0.04 / 0.09 115 / 140 (793 / 965) 85 Min. (586 Min.) 15 Min. 50 Min. 22 / 31 Normalized & TemperedGlobal Energy Products D69 35Mn2A --- 0.32 / 0.39 0.35 Max. --- 1.4 / 1.8 --- 0.3 Max. --- 0.025 Max. 0.17 / 0.37 0.025 Max. --- 125 / 140 (861 / 965) 115 / 130 (792 / 896) 11 Min. --- 25 / 31 Quenched & TemperedTenaris DC 1530M 0.01 / 0.04 0.31 / 0.36 0.2 Max. 0.25 Max. 1.4 / 1.6 0.05 Max. 0.15 Max. --- 0.025 Max. 0.25 / 0.4 0.025 Max. 0.1 / 0.15 115 / 140 (793 / 965) 85 Min. (586 Min.) --- --- 22 / 31 Normalized & Forced CoolingUpco CD 1541M --- 0.4 / 0.44 0.25 Max. 0.35 Max. 1.35 / 1.55 0.05 Max. 0.25 Max. --- 0.035 Max. 0.2 / 0.3 0.04 Max. 0.05 Max. 115 / 140 (793 / 965) 85 Min. (586 Min.) 10 Min. 3 40 Min. 22 / 31 Normalized & TemperedWeatherford MD 1541MV --- 0.4 / 0.44 0.25 Max. --- 1.35 / 1.55 0.05 Max. 0.25 Max. --- 0.035 Max. 0.15 / 0.3 0.04 Max. --- 115 / 140 (793 / 965) 95 Min. (655 Min.) 14 Min. 45 Min. 22 / 31 Normalized & TemperedWeatherford S67 1029Md --- 0.22 / 0.29 0.2 Max. 0.35 Max. 1.0 / 1.32 0.05 Max. 0.15 Max. --- 0.025 Max. 0.15 / 0.3 0.04 Max. --- 120 / 140 (827 / 965) 110 Min. (758 Min.) 11 Min. 55 Min. 23 / 31 Quenched & TemperedAPI Class D AlloyNorris 78 A-4142-M 0.35 Max. 0.38 / 0.45 0.8 / 1.1 0.35 Max. 0.8 / 1.0 0.15 / 0.25 0.45 Max. --- 0.035 Max. 0.15 / 0.35 0.035 Max. 0.02 / 0.07 120 / 140 (827 / 965) 95 Min. (655 min.) 10 Min. 45 Min. 23 / 31 Normalized & TemperedGlobal Energy Products AD79 20CrMoA --- 0.17 / 0.24 0.8 / 1.1 --- 0.4 / 0.7 0.15 / 0.25 0.3 Max. --- 0.025 Max. 0.17 / 0.37 0.025 Max. --- 125 / 140 (861 / 965) 115 / 130 (792 / 896) 12 Min. --- 25 / 31 Quenched & TemperedLaxmi Udyog LS3 4142H --- 0.38 / 0.45 0.8 / 1.1 --- 0.8 / 1.0 0.15 / 0.25 0.45 Max. --- 0.035 Max. 0.15 / 0.35 0.035 Max. --- 115 / 140 (793 / 965) 85 Min. (586 Min.) 10 Min. 45 Min. 22 / 31 Induction Heating Normalized & TemperedPCC Cameron D Steel Series, Chemical and Physical Properties and Heat Treatment UnavailableSBS Cameron S2H 4130M --- 0.28 / 0.45 0.8 / 1.3 --- 0.4 / 1.0 0.15 / 0.25 --- --- 0.03 Max. 0.15 / 0.35 0.045 Max. --- 115 / 140 (793 / 965) 85 Min. (586 Min.) --- --- 22 / 31 Full Length Heat TreatmentTenaris DA 4142M 0.01 / 0.04 0.4 / 0.45 0.8 / 1.1 0.25 Max. 0.75 / 1.0 0.15 / 0.25 0.25 Max. --- 0.025 Max. 0.15 / 0.35 0.025 Max. --- 115 / 140 (793 / 965) 85 Min. (586 Min.) --- --- 22 / 31 Normalized & TemperedUpco AD 4142M --- 0.4 / 0.45 0.8 / 1.1 0.45 Max. 0.75 / 1.0 0.15 / 0.25 0.25 Max. --- 0.035 Max. 0.15 / 0.3 0.04 Max. 0.02 / 0.03 115 / 140 (793 / 965) 85 Min. (586 Min.) 10 Min. 3 40 Min. 22 / 31 Normalized & TemperedWeatherford D 4142SR --- 0.4 / 0.45 0.8 / 1.1 --- 0.75 / 1.0 0.15 / 0.25 0.25 Max. --- 0.035 Max. 0.15 / 0.3 0.04 Max. --- 115 / 140 (793 / 965) 100 Min. (689 Min.) 10 Min. 45 Min. 22 / 31 Normalized & TemperedAPI Class D SpecialNorris 75 A-4330-M 0.35 Max. 0.3 / 0.34 0.8 / 1.0 0.35 Max. 0.8 / 1.0 0.2 / 0.3 1.65 / 2.0 --- 0.035 Max. 0.15 / 0.35 0.04 Max. 0.04 / 0.09 125 / 140 (861 / 965) 100 Min. (689 Min.) 10 Min. 45 Min. 25 / 31 Normalized & TemperedNorris 90 A-4320-M 0.35 Max. 0.18 / 0.24 0.7 / 0.9 0.35 Max. 0.8 / 1.0 0.2 / 0.3 1.15 / 1.5 --- 0.025 Max. 0.15 / 0.35 0.025 Max. 0.04 / 0.09 120 / 140 (827 / 965) 95 Min. (655 Min.) 10 Min. 45 Min. 23 / 31 Normalized & TemperedGlobal Energy Products KD89 20Ni2MnA --- 0.18 / 0.23 0.35 Max. --- 0.7 / 0.9 0.2 / 0.3 1.65 / 2.0 --- 0.025 Max. 0.17 / 0.37 0.025 Max. --- 125 / 140 (861 / 965) 115 / 130 (792 / 896) 12 Min. --- 25 / 31 Quenched & TemperedSBS Cameron HNC 4330M --- 0.3 / 0.37 0.85 / 1.7 --- 0.6 / 0.9 0.15 / 0.3 1.2 / 1.6 --- 0.03 Max. 0.1 / 0.4 0.045 Max. --- 115 / 140 (793 / 965) 85 Min. (586 Min.) --- --- 22 / 31 Full Length Heat TreatmentTenaris DS 4330M 0.01 / 0.06 0.3 / 0.37 0.8 / 1.1 0.25 Max. 0.7 / 0.95 0.2 / 0.3 1.65 / 2.0 --- 0.025 Max. 0.15 / 0.35 0.025 Max. 0.035 / 0.1 115 / 140 (793 / 965) 85 Min. (586 Min.) --- --- 22 / 31 Normalized & TemperedTenaris KD 4320M 0.01 / 0.05 0.18 / 0.25 0.7 / 0.9 0.25 Max. 0.8 / 1.0 0.2 / 0.3 1.15 / 1.5 --- 0.025 Max. 0.15 / 0.35 0.025 Max. 0.03 / 0.07 115 / 140 (793 / 965) 85 Min. (586 Min.) --- --- 22 / 31 Normalized & TemperedUpco KD 4720M --- 0.19 / 0.23 0.8 / 1.05 0.4 / 0.6 0.85 / 1.05 0.22 / 0.3 0.9 / 1.2 --- 0.035 Max. 0.15 / 0.35 0.04 Max. 0.02 / 0.03 115 / 140 (793 / 965) 85 Min. (586 Min.) 10 Min. 3 40 Min. 22 / 31 Normalized & TemperedWeatherford KD 4720SR --- 0.19 / 0.23 0.8 / 1.05 --- 0.85 / 1.05 0.22 / 0.3 0.9 / 1.2 --- 0.035 Max. 0.15 / 0.35 0.04 Max. --- 115 / 140 (793 / 965) 95 Min. (655 Min.) 14 Min. 45 Min. 22 / 31 Normalized & TemperedWeatherford S87 3130Md --- 0.22 / 0.29 0.41 / 0.65 0.35 Max. 0.71 / 1.0 0.05 Max. 0.7 / 1.0 --- 0.025 Max. 0.15 / 0.35 0.035 Max. --- 125 / 140 (861 / 965) 115 Min. (792 Min.) 12 Min. 55 Min. 25 / 31 Quenched & TemperedNon-API Special Service High StrengthNorris 96 A-4138-M 0.35 Max. 0.36 / 0.45 0.52 / 0.88 0.35 Max. 0.88 / 1.52 0.25 / 0.35 0.3 Max. 0.02 / 0.045 0.035 Max. 0.2 / 0.35 0.04 Max. 0.04 / 0.09 140 / 150 (965 / 1 034) 115 Min. (793 Min.) 10 Min. 45 Min. 30 / 34 Normalized & TemperedNorris 97 A-4330-M 0.35 Max. 0.28 / 0.35 0.7 / 1.0 0.35 Max. 0.7 / 1.0 0.2 / 0.3 1.65 / 2.0 --- 0.035 Max. 0.15 / 0.35 0.04 Max. 0.04 / 0.09 140 / 150 (965 / 1 034) 115 Min. (793 Min.) 10 Min. 45 Min. 30 / 34 Normalized & TemperedGlobal Energy Products HS 20CrMoA --- 0.32 / 0.4 0.8 / 1.1 --- 0.4 / 0.7 0.15 / 0.25 0.3 Max. --- 0.025 Max. 0.17 / 0.37 0.025 Max. --- 140 / 155 (965 / 1 068) 130 / 145 (896 / 999) 11 Min. --- 30 / 35 Quenched & TemperedLaxmi Udyog LS4 4337 --- 0.35 / 0.4 0.7 / 0.9 --- 0.6 / 0.8 0.2 / 0.3 1.65 / 2.0 --- 0.04 Max. 0.2 / 0.35 0.04 Max. --- 125 / 145 (861 / 999) 90 Min. (620 Min.) 10 Min. 45 Min. 25 / 33 Induction Case Hardened (Q&T)Laxmi Udyog LS5 4330 --- 0.28 / 0.35 0.7 / 0.9 --- 0.7 / 0.9 0.2 / 0.3 1.65 / 2.0 --- 0.035 Max. 0.15 / 0.35 0.035 Max. --- 140 / 150 (965 / 1 034) 115 / 125 (793 / 861) 10 Min. 45 Min. 30 / 34 Induction Case Hardened (Q&T)SBS Cameron HNC-HS 4330M --- 0.3 / 0.37 0.85 / 1.7 --- 0.6 / 0.9 0.15 / 0.3 1.2 / 1.6 --- 0.03 Max. 0.1 / 0.4 0.045 Max. --- 140 / 160 (965 / 1 103) --- --- --- --- --- Full Length Heat TreatmentTenaris Plus 1530M 0.01 / 0.04 0.31 / 0.36 0.2 Max. 0.25 Max. 1.4 / 1.6 0.05 Max. 0.15 Max. --- 0.025 Max. 0.25 / 0.4 0.025 Max. 0.1 / 0.15 140 / 160 (965 / 1 103) 115 Min. (793 Min.) --- --- 30 / 36 Normalized & Surface QuenchedTenaris UHS-NR 4330M 0.01 / 0.06 0.3 / 0.37 0.8 / 1.1 0.25 Max. 0.7 / 0.95 0.2 / 0.3 1.65 / 2.0 --- 0.025 Max. 0.15 / 0.35 0.025 Max. 0.035 / 0.1 140 / 160 (965 / 1 103) 115 Min. (793 Min.) --- --- 30 / 36 Normalized & TemperedTenaris MMS-NR 4138M 0.01 / 0.07 0.38 / 0.43 0.5 / 0.9 0.25 Max. 1.1 / 1.4 0.25 / 0.35 0.3 Max. 0.025 / 0.045 0.025 Max. 0.2 / 0.4 0.025 Max. 0.04 / 0.07 138 / 155 (951 / 1 068) 115 Min. (793 Min.) --- --- 29 / 35 Normalized & TemperedUpco HS 4138M --- 0.38 / 0.42 0.55 / 0.85 0.35 Max. 1.2 / 1.4 0.24 / 0.32 0.3 Max. 0.03 / 0.04 0.035 Max. 0.2 / 0.35 0.04 Max. 0.045 / 0.065 140 / 160 (965 / 1 103) 105 Min. (723 Min.) 8 Min. 3 30 Min. 30 / 36 Normalized & TemperedWeatherford EL Special --- 0.38 / 0.42 0.55 / 0.85 --- 1.0 / 1.3 0.24 / 0.55 0.3 Max. --- 0.035 Max. 0.2 / 0.35 0.04 Max. --- 4 4 4 4 4 4 4 Induction Case HardenedWeatherford S88 3130Md --- 0.22 / 0.29 0.41 / 0.65 0.35 Max. 0.71 / 1.0 0.05 Max. 0.7 / 1.0 --- 0.025 Max. 0.15 / 0.35 0.035 Max. --- 140 / 155 (965 / 1 068) 130 Min. (896 Min.) 11 Min. 50 Min. 30 / 35 Quenched & TemperedWeatherford T66 / XD 4138Md --- 0.38 / 0.42 0.55 / 0.85 --- 1.0 / 1.3 0.24 / 0.32 0.3 Max. --- 0.035 Max. 0.2 / 0.35 0.04 Max. --- 140 / 150 (965 / 1 034) 115 Min. (793 Min.) 10 Min. 40 Min. 30 / 34 Normalized & Tempered
Coiled Rod
Manufacturer Type AISI SeriesChemical Properties, % Physical Properties
Aluminum (Al)
Carbon(C)
Chromium(Cr)
Copper(Cu)
Manganese(Mn)
Molybdenum(Mo)
Nickel(Ni)
Niobium(Nb)
Phosphorus(P)
Silicon(Si)
Sulfur(S)
Vanadium(V)
Tensile Yield Elongation Reduction in Area Rockwell Hardness HRC
Heat TreatmentD Carbon ksi (Mpa) ksi (Mpa) 8”, % %Pro-Rod 620C C-1536-M 0.02 / 0.05 0.33 / 0.37 0.15 / 0.19 0.12 Max. 1.5 / 1.6 0.04 Max. 0.1 Max. --- 0.015 Max. 0.2 / 0.3 0.015 Max. --- 120 Min. 827 Min. 95 Min. 655 Min. --- --- 22 Min. Quenched & TemperedCorod DR 1536M 0.02 / 0.05 0.28 / 0.32 0.25 Max. 0.35 Max. 1.1 / 1.3 0.25 Max. 0.25 Max. --- 0.015 Max. 0.15 / 0.35 0.01 Max. --- 115 Min. 793 Min. 85 Min. 586 Min. --- --- 26 5 Quenched & TemperedD AlloyPro-Rod 780M A-4120-M 0.02 / 0.05 0.18 / 0.23 1.8 / 2.0 0.2 / 0.3 0.4 / 0.6 0.15 / 0.2 0.1 Max. --- 0.015 Max. 0.15 / 0.3 0.015 Max. --- 120 Min. 827 Min. 95 Min. 655 Min. --- --- 22 Min. Quenched & TemperedCorod DER 4120M 0.02 / 0.05 0.18 / 0.23 1.8 / 2.0 0.2 / 0.3 0.4 / 0.6 1.8 / 2.0 0.15 / 0.3 --- 0.015 Max. 0.15 / 0.3 0.01 Max. --- 115 Min. 793 Min. 90 Min. 620 Min. --- --- 26 5 Quenched & TemperedD SpecialPro-Rod 750N A-4320-M 0.02 / 0.05 0.18 / 0.21 0.7 / 0.8 0.1 Max. 0.8 / 0.9 0.2 / 0.25 1.15 / 1.25 --- 0.025 Max. 0.2 / 0.25 0.025 Max. --- 120 Min. 827 Min. 100 Min. 689 Min. --- --- 22 Min. Quenched & TemperedSpecial Service High StrengthPro-Rod 960M A-4120-M 0.02 / 0.05 0.18 / 0.23 1.8 / 2.0 0.2 / 0.3 0.4 / 0.6 0.15 / 0.2 0.1 Max. --- 0.015 Max. 0.15 / 0.3 0.015 Max. --- 140 Min. 965 Min. 115 Min. 793 Min. --- --- 28 Min. Quenched & TemperedPro-Rod 970N A-4330-M 0.02 / 0.05 0.26 / 0.3 0.7 / 0.8 0.12 Max. 0.6 / 0.7 0.2 / 0.25 1.65 / 1.75 --- 0.015 Max. 0.2 / 0.3 0.015 Max. --- 145 Min. 999 Min. 120 Min. 827 Min. --- --- 28 Min. Quenched & TemperedCorod SER 4120M 0.02 / 0.05 0.18 / 0.23 1.8 / 2.0 0.2 / 0.3 0.4 / 0.6 1.8 / 2.0 0.15 / 0.3 --- 0.015 Max. 0.15 / 0.3 0.01 Max. --- 130 Min. 896 Min. 110 Min. 758 Min. --- --- 32 5 Quenched & Tempered
2HRC Numerals (in brackets) are values not ordinarily used.1Tensile strength and yield strength values are the only steel sucker rod and pony rod physical requirement of API Specification 11B. All other physical properties are expected values only and may deviate from the listed values shown.
G001-V01-072308
Based on latest information available at the tim
e of publication.
Stee
l Suc
ker R
od, P
ony
Rod
and
Coile
d Ro
d Co
mpa
rison
Cha
rt
Steel Sucker Rods and Pony Rods
Manufacturer Type AISI SeriesChemical Properties, % Physical Properties1
Aluminum (Al)
Carbon(C)
Chromium(Cr)
Copper(Cu)
Manganese(Mn)
Molybdenum(Mo)
Nickel(Ni)
Niobium(Nb)
Phosphorus(P)
Silicon(Si)
Sulfur(S)
Vanadium(V)
Tensile Yield Elongation Reduction in Area Rockwell Hardness HRC2 Heat Treatment
API Class C ksi (Mpa) ksi (Mpa) 8”, % %Norris 30 C-1536-M 0.35 Max. 0.3 / 0.39 0.3 Max. 0.35 Max. 1.1 / 1.4 0.06 Max. 0.35 Max. --- 0.04 Max. 0.15 / 0.35 0.045 Max. 0.02 / 0.07 90 / 115 (621 / 793) 60 Min. (414 Min.) 15 Min. 45 Min. (9) / 23 NormalizedGlobal Energy Products C60 35Mn2A --- 0.32 / 0.39 0.35 Max. --- 1.4 / 1.8 --- 0.3 Max. --- 0.025 Max. 0.17 / 0.37 0.025 Max. --- 100 / 115 (689 / 793) 90 / 105 (620 / 723) 13 Min. --- (14) / 23 Quenched & TemperedLaxmi Udyog LS1 C1536 --- 0.3 / 0.39 Trace --- 1.1 / 1.4 Trace --- --- 0.04 Max. 0.15 / 0.35 0.04 Max. --- 90 / 115 (621 / 793) 60 Min. (414 Min.) 15 Min. 45 Min. (9) / 23 Induction Heating NormalizedPCC Cameron C Steel Series, Chemical and Physical Properties and Heat Treatment UnavailableSBS Cameron VM5 1536 --- 0.28 / 0.4 --- --- 1.2 / 1.5 --- --- --- 0.03 Max. 0.15 / 0.35 0.045 Max. --- 90 / 115 (621 / 793) 60 Min. (414 Min.) --- --- (9) / 23 Full Length Heat TreatmentTenaris C 1530M 0.01 / 0.04 0.31 / 0.36 0.2 Max. 0.25 Max. 1.4 / 1.6 0.05 Max. 0.15 Max. --- 0.025 Max. 0.25 / 0.4 0.025 Max. 0.1 / 0.15 90 / 115 (621 / 793) 60 Min. (414 Min.) --- --- (9) / 23 Normalized & TemperedUpco C 1536M --- 0.3 / 0.37 0.25 Max. 0.35 Max. 1.2 / 1.5 0.05 Max. 0.25 Max. --- 0.04 Max. 0.2 / 0.3 0.04 Max. 0.015 / 0.03 90 / 115 (621 / 793) 60 Min. (414 Min.) 14 Min.3 45 Min. (9) / 23 Normalized & TemperedWeatherford C 1536SR --- 0.3 / 0.37 0.25 Max. --- 1.2 / 1.5 0.05 Max. 0.2 Max. --- 0.04 Max. 0.2 / 0.3 0.04 Max. --- 90 / 115 (621 / 793) 60 Min. (414 Min.) 18 Min. 50 Min. (9) / 23 NormalizedWeatherford S60 1029Md --- 0.22 / 0.29 0.2 Max. 0.35 Max. 1.0 / 1.32 0.05 Max. 0.15 Max. --- 0.025 Max. 0.15 / 0.3 0.04 Max. --- 100 / 115 (689 / 793) 90 / 105 (620 / 723) 13 Min. 55 Min. (14) / 23 Quenched & TemperedAPI Class KNorris 40 A-4621-M 0.35 Max. 0.18 / 0.25 0.25 Max. 0.35 Max. 0.6 / 0.8 0.15 / 0.25 1.65 / 2.0 --- 0.035 Max. 0.15 / 0.35 0.035 Max. 0.02 / 0.07 90 / 115 (621 / 793) 60 Min. (414 Min.) 16 Min. 55 Min. (9) / 23 Normalized & TemperedGlobal Energy Products K59 20Ni2MnA --- 0.18 / 0.23 0.35 Max. --- 0.7 / 0.9 0.2 / 0.3 1.65 / 2.0 --- 0.025 Max. 0.17 / 0.37 0.025 Max. --- 100 / 115 (689 / 793) 90 / 105 (620 / 723) 13 Min. --- (14) / 23 Quenched & TemperedLaxmi Udyog LS2 4621 --- 0.18 / 0.25 --- --- 0.6 / 0.8 0.15 / 0.25 1.65 / 2.0 --- 0.035 Max. 0.15 / 0.35 0.035 Max. --- 90 / 115 (621 / 793) 60 Min. (414 Min.) 16 Min. 55 Min. (9) / 23 Induction Heating Normalized & TemperedPCC Cameron K Steel Series, Chemical and Physical Properties and Heat Treatment UnavailableSBS Cameron N2P 4621M --- 0.18 / 0.23 0.25 / 0.35 --- 0.7 / 0.9 0.2 / 0.3 1.65 / 2.0 --- 0.03 Max. 0.15 / 0.3 0.045 Max. --- 90 / 115 (621 / 793) 60 Min. (414 Min.) --- --- (9) / 23 Full Length Heat TreatmentTenaris K 4621M 0.01 / 0.04 0.18 / 0.25 0.3 Max. 0.25 Max. 0.7 / 1.0 0.2 / 0.3 1.65 / 2.0 --- 0.025 Max. 0.15 / 0.3 0.025 Max. --- 90 / 115 (621 / 793) 60 Min. (414 Min.) --- --- (9) / 23 NormalizedUpco K 4620M --- 0.2 / 0.25 0.25 Max. 0.4 Max. 0.75 / 1.0 0.2 / 0.28 1.65 / 2.0 --- 0.035 Max. 0.2 / 0.35 0.04 Max. 0.015 / 0.03 90 / 115 (621 / 793) 60 Min. (414 Min.) 16 Min. 3 40 Min. (9) / 23 Normalized & TemperedWeatherford K 4623 --- 0.2 / 0.25 0.25 Max. --- 0.75 / 1.0 0.2 / 0.3 1.65 / 2.0 --- 0.035 Max. 0.2 / 0.35 0.04 Max. --- 90 / 115 (621 / 793) 60 Min. (414 Min.) 16 Min. 60 Min. (9) / 23 Normalized & TemperedWeatherford S59 46XX --- 0.14 / 0.21 --- --- 0.55 / 0.75 0.2 / 0.3 1.65 / 2.0 --- 0.025 Max. 0.15 / 0.35 0.035 Max. --- 100 / 115 (689 / 793) 90 / 105 (620 / 723) 13 Min. 55 Min. (14) / 23 Quenched & TemperedAPI Class D CarbonNorris 54 C-1541-M 0.35 Max. 0.36 / 0.45 0.3 Max. 0.35 Max. 1.35 / 1.65 0.06 Max. 0.35 Max. --- 0.04 Max. 0.15 / 0.35 0.04 Max. 0.04 / 0.09 115 / 140 (793 / 965) 85 Min. (586 Min.) 15 Min. 50 Min. 22 / 31 Normalized & TemperedGlobal Energy Products D69 35Mn2A --- 0.32 / 0.39 0.35 Max. --- 1.4 / 1.8 --- 0.3 Max. --- 0.025 Max. 0.17 / 0.37 0.025 Max. --- 125 / 140 (861 / 965) 115 / 130 (792 / 896) 11 Min. --- 25 / 31 Quenched & TemperedTenaris DC 1530M 0.01 / 0.04 0.31 / 0.36 0.2 Max. 0.25 Max. 1.4 / 1.6 0.05 Max. 0.15 Max. --- 0.025 Max. 0.25 / 0.4 0.025 Max. 0.1 / 0.15 115 / 140 (793 / 965) 85 Min. (586 Min.) --- --- 22 / 31 Normalized & Forced CoolingUpco CD 1541M --- 0.4 / 0.44 0.25 Max. 0.35 Max. 1.35 / 1.55 0.05 Max. 0.25 Max. --- 0.035 Max. 0.2 / 0.3 0.04 Max. 0.05 Max. 115 / 140 (793 / 965) 85 Min. (586 Min.) 10 Min. 3 40 Min. 22 / 31 Normalized & TemperedWeatherford MD 1541MV --- 0.4 / 0.44 0.25 Max. --- 1.35 / 1.55 0.05 Max. 0.25 Max. --- 0.035 Max. 0.15 / 0.3 0.04 Max. --- 115 / 140 (793 / 965) 95 Min. (655 Min.) 14 Min. 45 Min. 22 / 31 Normalized & TemperedWeatherford S67 1029Md --- 0.22 / 0.29 0.2 Max. 0.35 Max. 1.0 / 1.32 0.05 Max. 0.15 Max. --- 0.025 Max. 0.15 / 0.3 0.04 Max. --- 120 / 140 (827 / 965) 110 Min. (758 Min.) 11 Min. 55 Min. 23 / 31 Quenched & TemperedAPI Class D AlloyNorris 78 A-4142-M 0.35 Max. 0.38 / 0.45 0.8 / 1.1 0.35 Max. 0.8 / 1.0 0.15 / 0.25 0.45 Max. --- 0.035 Max. 0.15 / 0.35 0.035 Max. 0.02 / 0.07 120 / 140 (827 / 965) 95 Min. (655 min.) 10 Min. 45 Min. 23 / 31 Normalized & TemperedGlobal Energy Products AD79 20CrMoA --- 0.17 / 0.24 0.8 / 1.1 --- 0.4 / 0.7 0.15 / 0.25 0.3 Max. --- 0.025 Max. 0.17 / 0.37 0.025 Max. --- 125 / 140 (861 / 965) 115 / 130 (792 / 896) 12 Min. --- 25 / 31 Quenched & TemperedLaxmi Udyog LS3 4142H --- 0.38 / 0.45 0.8 / 1.1 --- 0.8 / 1.0 0.15 / 0.25 0.45 Max. --- 0.035 Max. 0.15 / 0.35 0.035 Max. --- 115 / 140 (793 / 965) 85 Min. (586 Min.) 10 Min. 45 Min. 22 / 31 Induction Heating Normalized & TemperedPCC Cameron D Steel Series, Chemical and Physical Properties and Heat Treatment UnavailableSBS Cameron S2H 4130M --- 0.28 / 0.45 0.8 / 1.3 --- 0.4 / 1.0 0.15 / 0.25 --- --- 0.03 Max. 0.15 / 0.35 0.045 Max. --- 115 / 140 (793 / 965) 85 Min. (586 Min.) --- --- 22 / 31 Full Length Heat TreatmentTenaris DA 4142M 0.01 / 0.04 0.4 / 0.45 0.8 / 1.1 0.25 Max. 0.75 / 1.0 0.15 / 0.25 0.25 Max. --- 0.025 Max. 0.15 / 0.35 0.025 Max. --- 115 / 140 (793 / 965) 85 Min. (586 Min.) --- --- 22 / 31 Normalized & TemperedUpco AD 4142M --- 0.4 / 0.45 0.8 / 1.1 0.45 Max. 0.75 / 1.0 0.15 / 0.25 0.25 Max. --- 0.035 Max. 0.15 / 0.3 0.04 Max. 0.02 / 0.03 115 / 140 (793 / 965) 85 Min. (586 Min.) 10 Min. 3 40 Min. 22 / 31 Normalized & TemperedWeatherford D 4142SR --- 0.4 / 0.45 0.8 / 1.1 --- 0.75 / 1.0 0.15 / 0.25 0.25 Max. --- 0.035 Max. 0.15 / 0.3 0.04 Max. --- 115 / 140 (793 / 965) 100 Min. (689 Min.) 10 Min. 45 Min. 22 / 31 Normalized & TemperedAPI Class D SpecialNorris 75 A-4330-M 0.35 Max. 0.3 / 0.34 0.8 / 1.0 0.35 Max. 0.8 / 1.0 0.2 / 0.3 1.65 / 2.0 --- 0.035 Max. 0.15 / 0.35 0.04 Max. 0.04 / 0.09 125 / 140 (861 / 965) 100 Min. (689 Min.) 10 Min. 45 Min. 25 / 31 Normalized & TemperedNorris 90 A-4320-M 0.35 Max. 0.18 / 0.24 0.7 / 0.9 0.35 Max. 0.8 / 1.0 0.2 / 0.3 1.15 / 1.5 --- 0.025 Max. 0.15 / 0.35 0.025 Max. 0.04 / 0.09 120 / 140 (827 / 965) 95 Min. (655 Min.) 10 Min. 45 Min. 23 / 31 Normalized & TemperedGlobal Energy Products KD89 20Ni2MnA --- 0.18 / 0.23 0.35 Max. --- 0.7 / 0.9 0.2 / 0.3 1.65 / 2.0 --- 0.025 Max. 0.17 / 0.37 0.025 Max. --- 125 / 140 (861 / 965) 115 / 130 (792 / 896) 12 Min. --- 25 / 31 Quenched & TemperedSBS Cameron HNC 4330M --- 0.3 / 0.37 0.85 / 1.7 --- 0.6 / 0.9 0.15 / 0.3 1.2 / 1.6 --- 0.03 Max. 0.1 / 0.4 0.045 Max. --- 115 / 140 (793 / 965) 85 Min. (586 Min.) --- --- 22 / 31 Full Length Heat TreatmentTenaris DS 4330M 0.01 / 0.06 0.3 / 0.37 0.8 / 1.1 0.25 Max. 0.7 / 0.95 0.2 / 0.3 1.65 / 2.0 --- 0.025 Max. 0.15 / 0.35 0.025 Max. 0.035 / 0.1 115 / 140 (793 / 965) 85 Min. (586 Min.) --- --- 22 / 31 Normalized & TemperedTenaris KD 4320M 0.01 / 0.05 0.18 / 0.25 0.7 / 0.9 0.25 Max. 0.8 / 1.0 0.2 / 0.3 1.15 / 1.5 --- 0.025 Max. 0.15 / 0.35 0.025 Max. 0.03 / 0.07 115 / 140 (793 / 965) 85 Min. (586 Min.) --- --- 22 / 31 Normalized & TemperedUpco KD 4720M --- 0.19 / 0.23 0.8 / 1.05 0.4 / 0.6 0.85 / 1.05 0.22 / 0.3 0.9 / 1.2 --- 0.035 Max. 0.15 / 0.35 0.04 Max. 0.02 / 0.03 115 / 140 (793 / 965) 85 Min. (586 Min.) 10 Min. 3 40 Min. 22 / 31 Normalized & TemperedWeatherford KD 4720SR --- 0.19 / 0.23 0.8 / 1.05 --- 0.85 / 1.05 0.22 / 0.3 0.9 / 1.2 --- 0.035 Max. 0.15 / 0.35 0.04 Max. --- 115 / 140 (793 / 965) 95 Min. (655 Min.) 14 Min. 45 Min. 22 / 31 Normalized & TemperedWeatherford S87 3130Md --- 0.22 / 0.29 0.41 / 0.65 0.35 Max. 0.71 / 1.0 0.05 Max. 0.7 / 1.0 --- 0.025 Max. 0.15 / 0.35 0.035 Max. --- 125 / 140 (861 / 965) 115 Min. (792 Min.) 12 Min. 55 Min. 25 / 31 Quenched & TemperedNon-API Special Service High StrengthNorris 96 A-4138-M 0.35 Max. 0.36 / 0.45 0.52 / 0.88 0.35 Max. 0.88 / 1.52 0.25 / 0.35 0.3 Max. 0.02 / 0.045 0.035 Max. 0.2 / 0.35 0.04 Max. 0.04 / 0.09 140 / 150 (965 / 1 034) 115 Min. (793 Min.) 10 Min. 45 Min. 30 / 34 Normalized & TemperedNorris 97 A-4330-M 0.35 Max. 0.28 / 0.35 0.7 / 1.0 0.35 Max. 0.7 / 1.0 0.2 / 0.3 1.65 / 2.0 --- 0.035 Max. 0.15 / 0.35 0.04 Max. 0.04 / 0.09 140 / 150 (965 / 1 034) 115 Min. (793 Min.) 10 Min. 45 Min. 30 / 34 Normalized & TemperedGlobal Energy Products HS 20CrMoA --- 0.32 / 0.4 0.8 / 1.1 --- 0.4 / 0.7 0.15 / 0.25 0.3 Max. --- 0.025 Max. 0.17 / 0.37 0.025 Max. --- 140 / 155 (965 / 1 068) 130 / 145 (896 / 999) 11 Min. --- 30 / 35 Quenched & TemperedLaxmi Udyog LS4 4337 --- 0.35 / 0.4 0.7 / 0.9 --- 0.6 / 0.8 0.2 / 0.3 1.65 / 2.0 --- 0.04 Max. 0.2 / 0.35 0.04 Max. --- 125 / 145 (861 / 999) 90 Min. (620 Min.) 10 Min. 45 Min. 25 / 33 Induction Case Hardened (Q&T)Laxmi Udyog LS5 4330 --- 0.28 / 0.35 0.7 / 0.9 --- 0.7 / 0.9 0.2 / 0.3 1.65 / 2.0 --- 0.035 Max. 0.15 / 0.35 0.035 Max. --- 140 / 150 (965 / 1 034) 115 / 125 (793 / 861) 10 Min. 45 Min. 30 / 34 Induction Case Hardened (Q&T)SBS Cameron HNC-HS 4330M --- 0.3 / 0.37 0.85 / 1.7 --- 0.6 / 0.9 0.15 / 0.3 1.2 / 1.6 --- 0.03 Max. 0.1 / 0.4 0.045 Max. --- 140 / 160 (965 / 1 103) --- --- --- --- --- Full Length Heat TreatmentTenaris Plus 1530M 0.01 / 0.04 0.31 / 0.36 0.2 Max. 0.25 Max. 1.4 / 1.6 0.05 Max. 0.15 Max. --- 0.025 Max. 0.25 / 0.4 0.025 Max. 0.1 / 0.15 140 / 160 (965 / 1 103) 115 Min. (793 Min.) --- --- 30 / 36 Normalized & Surface QuenchedTenaris UHS-NR 4330M 0.01 / 0.06 0.3 / 0.37 0.8 / 1.1 0.25 Max. 0.7 / 0.95 0.2 / 0.3 1.65 / 2.0 --- 0.025 Max. 0.15 / 0.35 0.025 Max. 0.035 / 0.1 140 / 160 (965 / 1 103) 115 Min. (793 Min.) --- --- 30 / 36 Normalized & TemperedTenaris MMS-NR 4138M 0.01 / 0.07 0.38 / 0.43 0.5 / 0.9 0.25 Max. 1.1 / 1.4 0.25 / 0.35 0.3 Max. 0.025 / 0.045 0.025 Max. 0.2 / 0.4 0.025 Max. 0.04 / 0.07 138 / 155 (951 / 1 068) 115 Min. (793 Min.) --- --- 29 / 35 Normalized & TemperedUpco HS 4138M --- 0.38 / 0.42 0.55 / 0.85 0.35 Max. 1.2 / 1.4 0.24 / 0.32 0.3 Max. 0.03 / 0.04 0.035 Max. 0.2 / 0.35 0.04 Max. 0.045 / 0.065 140 / 160 (965 / 1 103) 105 Min. (723 Min.) 8 Min. 3 30 Min. 30 / 36 Normalized & TemperedWeatherford EL Special --- 0.38 / 0.42 0.55 / 0.85 --- 1.0 / 1.3 0.24 / 0.55 0.3 Max. --- 0.035 Max. 0.2 / 0.35 0.04 Max. --- 4 4 4 4 4 4 4 Induction Case HardenedWeatherford S88 3130Md --- 0.22 / 0.29 0.41 / 0.65 0.35 Max. 0.71 / 1.0 0.05 Max. 0.7 / 1.0 --- 0.025 Max. 0.15 / 0.35 0.035 Max. --- 140 / 155 (965 / 1 068) 130 Min. (896 Min.) 11 Min. 50 Min. 30 / 35 Quenched & TemperedWeatherford T66 / XD 4138Md --- 0.38 / 0.42 0.55 / 0.85 --- 1.0 / 1.3 0.24 / 0.32 0.3 Max. --- 0.035 Max. 0.2 / 0.35 0.04 Max. --- 140 / 150 (965 / 1 034) 115 Min. (793 Min.) 10 Min. 40 Min. 30 / 34 Normalized & Tempered
Coiled Rod
Manufacturer Type AISI SeriesChemical Properties, % Physical Properties
Aluminum (Al)
Carbon(C)
Chromium(Cr)
Copper(Cu)
Manganese(Mn)
Molybdenum(Mo)
Nickel(Ni)
Niobium(Nb)
Phosphorus(P)
Silicon(Si)
Sulfur(S)
Vanadium(V)
Tensile Yield Elongation Reduction in Area Rockwell Hardness HRC
Heat TreatmentD Carbon ksi (Mpa) ksi (Mpa) 8”, % %Pro-Rod 620C C-1536-M 0.02 / 0.05 0.33 / 0.37 0.15 / 0.19 0.12 Max. 1.5 / 1.6 0.04 Max. 0.1 Max. --- 0.015 Max. 0.2 / 0.3 0.015 Max. --- 120 Min. 827 Min. 95 Min. 655 Min. --- --- 22 Min. Quenched & TemperedCorod DR 1536M 0.02 / 0.05 0.28 / 0.32 0.25 Max. 0.35 Max. 1.1 / 1.3 0.25 Max. 0.25 Max. --- 0.015 Max. 0.15 / 0.35 0.01 Max. --- 115 Min. 793 Min. 85 Min. 586 Min. --- --- 26 5 Quenched & TemperedD AlloyPro-Rod 780M A-4120-M 0.02 / 0.05 0.18 / 0.23 1.8 / 2.0 0.2 / 0.3 0.4 / 0.6 0.15 / 0.2 0.1 Max. --- 0.015 Max. 0.15 / 0.3 0.015 Max. --- 120 Min. 827 Min. 95 Min. 655 Min. --- --- 22 Min. Quenched & TemperedCorod DER 4120M 0.02 / 0.05 0.18 / 0.23 1.8 / 2.0 0.2 / 0.3 0.4 / 0.6 1.8 / 2.0 0.15 / 0.3 --- 0.015 Max. 0.15 / 0.3 0.01 Max. --- 115 Min. 793 Min. 90 Min. 620 Min. --- --- 26 5 Quenched & TemperedD SpecialPro-Rod 750N A-4320-M 0.02 / 0.05 0.18 / 0.21 0.7 / 0.8 0.1 Max. 0.8 / 0.9 0.2 / 0.25 1.15 / 1.25 --- 0.025 Max. 0.2 / 0.25 0.025 Max. --- 120 Min. 827 Min. 100 Min. 689 Min. --- --- 22 Min. Quenched & TemperedSpecial Service High StrengthPro-Rod 960M A-4120-M 0.02 / 0.05 0.18 / 0.23 1.8 / 2.0 0.2 / 0.3 0.4 / 0.6 0.15 / 0.2 0.1 Max. --- 0.015 Max. 0.15 / 0.3 0.015 Max. --- 140 Min. 965 Min. 115 Min. 793 Min. --- --- 28 Min. Quenched & TemperedPro-Rod 970N A-4330-M 0.02 / 0.05 0.26 / 0.3 0.7 / 0.8 0.12 Max. 0.6 / 0.7 0.2 / 0.25 1.65 / 1.75 --- 0.015 Max. 0.2 / 0.3 0.015 Max. --- 145 Min. 999 Min. 120 Min. 827 Min. --- --- 28 Min. Quenched & TemperedCorod SER 4120M 0.02 / 0.05 0.18 / 0.23 1.8 / 2.0 0.2 / 0.3 0.4 / 0.6 1.8 / 2.0 0.15 / 0.3 --- 0.015 Max. 0.15 / 0.3 0.01 Max. --- 130 Min. 896 Min. 110 Min. 758 Min. --- --- 32 5 Quenched & Tempered
2HRC Numerals (in brackets) are values not ordinarily used. 3Elongation, 2”, % 4The manufacturer claims these properties are not applicable because the rod performance is achieved with a residually stressed case that resists fatigue damage.
5HRC Numerals are maximum values +2.
