NOGA_Deburring Tools Catalog
-
Upload
mohamed-khalil -
Category
Documents
-
view
219 -
download
0
Transcript of NOGA_Deburring Tools Catalog
7/26/2019 NOGA_Deburring Tools Catalog
http://slidepdf.com/reader/full/nogadeburring-tools-catalog 1/30
A ll N O G A products m eet the strict req uirem ents of ISO 9001 and ISO 14001.
W e invite you to visit our w eb site:www.noga.com for m ore inform ation.
N O G A reserves the right to m ake changes in any of its prod ucts w ithout prior notice.
© C opyright 2010 by N O G A Engineering & Technology (2008) Ltd.
W ARN ING
•Blades are sharp and can cut.
•Blad es can break causing flying ob jects.
•Sharp ed ges and flying ob jects can cause injury.
•W ear safety g og gles (user and bystanders).
•D o not pry or bend blad es.
•Keep aw ay from children.
•D o not reg rind blad es.
A ll rights reserved. N o part of this p ublication m ay b e reproduced, transcribed, stored in an electronic retrievalsystem , translated into any language or com puter language, or be transm itted in any form w hatsoever w ithout the
prior w ritten consent of the publisher.
7/26/2019 NOGA_Deburring Tools Catalog
http://slidepdf.com/reader/full/nogadeburring-tools-catalog 2/30
N og a E ngineering & Technology (2008) Ltd. w as estab lished in 1980 b y G ustav H irschand his tw o sons N eft and Shuli.
G ustav w as the founder of the cutting tool industry of Israel.In 1941 he started H anita M etal W orks and in 1960 he established Vargus Ltd.
w hich bears the nam es of Varda and G ustav.
O ver the last 30 years N oga has grow n to b ecom e the w orld leader in the m anufacturingof three m ain lines:
D eb urring tools H old ing system s C utting fluid ap p licators
A ll N oga item s are d esigned to save you tim e and m oney and are very com petitivein price.
N oga's strongest points are: product design and developm ent, quality, service and product
range. O ur products are sold in m ore than 60 countries around the w orld either throughour ow n com panies or through a netw ork of exclusive agents.
W e thank you for choosing N oga.
N O G A head office
7/26/2019 NOGA_Deburring Tools Catalog
http://slidepdf.com/reader/full/nogadeburring-tools-catalog 3/30
CO UN TERSIN KSREVER SIBLE C O U N TERSIN KSN O G A G R IP 3 H A N D L EC H O LD E RBLADES
deburring
system
SIMPLY SOPHISTICATED 4
N O G A B U R R 3N O G A B U R R 5S U P ER B U R RE D G E O FFRAPID BU RRN O G A G R IP 1 H A N D L EN O G A G R IP 3 H A N D L ES H O LD E RS BLADES
HEAVY DUTY (ø3.2mm) 6-7
M A G IC B U R R 2M A G IC B U R R 4TELE BU RRT E D D Y B U R RN O G A G R IP 2 H A N D L EN O G A G R IP 3 H A N D L EN H O LD E RN B LA D E S
LIGHT DUTY (ø2.6mm) 8-9
M IN I SC RA PERSCRAPERIN TERN AL SCR APERAD JU STABLE SCR APERN O G A G R IP 3 H A N D L ES C H A N D LEUN I H AN DLED H O LD E RBLADES
AD JU STAB LE M IN I SC RA PERAD JU STABLE SCR APERY T H A N D L ED IAM O N D N EED LE FILE SETSN EEDLE FILES AN D SCR APERS
BLADES
SCRAPERS 14-15
COUNTERSINKS 10-11
10.4 R O TO D R IVEEXTERN AL RO TOD RIVEH EAVY D U TY IN T. RO TO D RIVEH EAVY D U TY EXT. RO TO D RIVEN O G A G R IP 1 H A N D L EN O G A G R IP 3 H A N D L ERO TO D RIVE H O LDERSBLADES
ROTODRIVECOUNTERSINKS
12-13
Parting Line Flash
HolesPipe Cross HolesExternal Shaft
Surface Scraping
Pipe Cross Holes
Straight Edge
Bushing Scraping
Cross HolesHoles Deep Holes
Curved Edge Shallow StepsStraight Edge
16-17YT SCRAPERS
NEW
7/26/2019 NOGA_Deburring Tools Catalog
http://slidepdf.com/reader/full/nogadeburring-tools-catalog 4/30SIMPLY SOPHISTICATED 5
CONTENTS
P V H A N D L ESPEC IAL TO O LSTRIO SETR E A M E RSPEC IAL BLAD ES
SPECIALTY TOOLS
AND BLADES
28-31
SETS AND KITS 23-27
C O N V E X ED C E R A -C U TC O N C A VE D C E R A -C U TCERA -CU T HA ND LEBLADESN O G A S O FT C U T TO O LN O G A H A R D C U T TO O LN O G A C U T H A N D L E
N O G A C U T B LA D E S
CO N VEXED D ISPOSABLE C ERA-CU TC E R A M IC D O U B L E B U R RC E R A M IC D O U B L E B U R R B LA D E
CERAMICS 20-21
N O G A O -RIN GN O G A V C U TK E YW A Y B U R RD O U B L E B U R RN O G A G R IP 1 H A N D L EN O G A G R IP 3 H A N D L EK H O LD E RL H O LD E RBLADES
DOUBLE EDGECUTTING
18-19
External
Straight EdgeInternal Slot Corner
P R O M O S E TSE C O N O M Y SE TSN O G A C U T SE TTELE SETSTHE SETPLATIN U M BO XG O LD B O XSILVE R U N IK ITBR O N ZE U N IKITPLASTIC ED G E O FF SETTR O U B L E SH O O TE R S ETM AG IC SET
Internal Corner
O-Ring GrooveKey Seat Key Way
Small RidgesThin Sheet Metal
Holes
22
NEW
NEW
NEW
NEW
NEW
NEWNEW
NEW
NEW
7/26/2019 NOGA_Deburring Tools Catalog
http://slidepdf.com/reader/full/nogadeburring-tools-catalog 5/30SIMPLY SOPHISTICATED 6
HANDLES HOLDER
NG-3 Handle N G 3000N ogaG rip-3 holds all blad e holders.Spare blades are kept inside thehandle. D esigned for m axim umcom fort in your hand .
S Holder EL02003H olds S blades (3.2m m ).S holder telescopes from 30-115m m .Length: 131m m .
NG-1 Handle N G 1000N og aG rip-1 holds all S blad es(3.2m m ). Spare b lades are keptinside the hand le. D esigned form axim um com fort in your hand.
SUPER BURR N G 3003For heavy duty job s.Includes: N G -3 handle, S holder, S100,S20 and S30 blades.
NOGA BURR 3 N G 1003W ill do alm ost all of your deburring jobs.Includes: N G -1 handle, S10, S20 andS35 blades.
NOGA BURR 5 N G 1005Sam e as N G 1003 but w ith 2 extra blades.Suitable for coarse to extra fine deburringoperations.Includes: N G -1 hand le, S10, S20, S35,S101 and S202 blades.
deburring
system
7/26/2019 NOGA_Deburring Tools Catalog
http://slidepdf.com/reader/full/nogadeburring-tools-catalog 6/30SIMPLY SOPHISTICATED 7
BLADES Order No.
RAPID BURR RB1000Steel housing for long life of handle.B lade is replaceable.H olds 3.2m m blades.Includes: 12m m hexagonal alum inumpainted hand le and S 10 b lade.
Pkg. weight(grams)
Packagequantity Works best on
Straight Edge Curved Edge
EDGE OFF EO 1000D isposable tool. A handy pocket clip isa standard feature of this tool.Includes: S10 blade m ounted in an 8m mpainted hexagonal alum inum handle.
S10
S10Tin
S20
S20 Tin
S30
S35
S60
S100 Cobalt
S101
S150
S202
BS1010
BS1012
BS2010
BS2012
BS3010
BS3510
BS6001
BS1018
BK1010
BK3010
BK2010
40
40
60
60
40
55
40
45
40
45
55
31
31
33
33
31
33
9
32
29
27
28
10
10
10
10
10
10
1
10
10
10
10
steel, alum inum and plastic
abrasive m aterial
brass and cast iron
stainless steel
both int. and ext. burrs
straight edges on m ost m aterials
cross holes in difficult to reach places
plastic and hard m aterials
fine edges on all m aterials
holes as sm all as 1.5m m D ia.
brass and cast iron fine ed ges
HEAVY DUTY ø3.2mm
Incl. angle(degrees)
All blades below are m ade of H .S.S.. H ardness 62-64R c except S100 C obalt 65-67Rc
L/R
L/R
L/R
L/R - for left and right hand users.
Cross HolesHoles Deep Holes
L/R
7/26/2019 NOGA_Deburring Tools Catalog
http://slidepdf.com/reader/full/nogadeburring-tools-catalog 7/30
deburring
systemMAGIC BURR 2 N G 2002W ill do alm ost all of your deburring jobs.Includes: N G -2 handle, N 1 and N 2blades.
MAGIC BURR 4 N G 2004Sam e as N G 2002 w ith tw o extra bladesfor cross holes in difficult to reach placesIncludes: N G -2 handle, N 1, N 2, N 3 andN 6 blades.
SIMPLY SOPHISTICATED 8
HANDLES HOLDER
NG-3 Handle N G 3000N ogaG rip-3 holds all blad e holders.Spare blades are kept inside thehandle. D esigned for m axim umcom fort in your hand .
NG-2 Handle N G 2000N ogaG rip-2 holds N blades (2.6m m ).Spare blades are kept inside thehandle. D esigned for m axim umcom fort in your hand .
TELE BURR N G 3002H olds 2.6m m N blades.H ighly popular tool.Includes: N G -3 handle, N holder,N 1 and N 2 blades.
N HolderEL01033
H olds 2.6m m blades.N holder telescopes from 25-115m m .Length: 131m m .
7/26/2019 NOGA_Deburring Tools Catalog
http://slidepdf.com/reader/full/nogadeburring-tools-catalog 8/30
LIGHT DUTY ø2.6mm
TEDDYBURR TB1000
SIMPLY SOPHISTICATED 9
N1
N1 Tin
N2
N2 Tin
N10 Cobalt
N3
N6
BLADES
BN 1010
BN 1012
BN 2010
BN 2012
BN 1310
BN 3010
BN 6001
Order No.
D esign for hard to reach locations.B lade is replaceable.Steel housing for long life of handle.Includes: 8m m painted hexagonal alum inum hand le and N 1 blade.
Works best on
40
40
80
80
45
50
40
13
13
14
14
13
13
6
10
10
10
10
10
10
1
steel, alum inum and plastic
abrasive m aterial
brass and cast iron
stainless steel
plastic and hard m aterials
both int. and ext. burrs
cross holes in difficult to reach places
All blades below are m ade of H .S.S.. H ardness 62-64R c except N 10 C obalt 65-67Rc
Pkg. weight(grams)
Packagequantity
Incl. angle(degrees)
Straight Edge Curved Edge
L/R - for left and right hand users.
L/R
L/R
Holes Deep HolesCross Holes
7/26/2019 NOGA_Deburring Tools Catalog
http://slidepdf.com/reader/full/nogadeburring-tools-catalog 9/30
deburring
systemCOUNTERSINK N G 3100The standard tool for countersinking.U seful for cham fering deep holes.Includes: N G -3 hand le, C holder andC 20 countersink (20m m ).
SIMPLY SOPHISTICATED 10
HANDLE HOLDER
C Holder CH3000H olds C 12, C 20 and C 30countersinks. M 7 external thread.H as an hexagonal cross section toprevent rotating inside handle.Length: 131m m .
NG-3 Handle N G 3000N ogaG rip-3 holds all blad e holders.D esigned for m axim um com fort inyour hand.
7/26/2019 NOGA_Deburring Tools Catalog
http://slidepdf.com/reader/full/nogadeburring-tools-catalog 10/30SIMPLY SOPHISTICATED 11
BLADES Order No.
B C 1211 90 25
All blades b elow are m ade of H .S.S.. H ardness 62-64Rc.
1-12
Range (mm)
B R 3001 90 810-22
B R 2001 90 75-10
B R 1001 90 53-5.5
B C 3011 90 583-30
B C 2011 90 283-20
Package quantity
C12
R3
R2
R1
C30
C20
Weight (grams)
1
1
1
1
1
1
angle (degrees)Countersinking
Holes
COUNTERSINKS
Pipe Cross Holes
MINI REVERSIBLE RC1000Very fine tool for deburring both back and front sides of holes.R ange: 3-5.5m m .Includes: steel handle and R 1 b lade.
MEDIUM REVERSIBLE RC2000R ange: 5-10m m .Includes: steel handle and R 2 b lade.
LARGE REVERSIBLE R C 2200R ange: 10-22m m .Includes: steel handle and R 3 b lade.
PATEN TED
TO REPLACE THE BLADEPull the alum inum knob out of the hand le. A t its end there is an hexag onal key. U se this key torep lace the blad e.
7/26/2019 NOGA_Deburring Tools Catalog
http://slidepdf.com/reader/full/nogadeburring-tools-catalog 11/30
deburring
systemH.D. EXT. ROTODRIVEN G 3500C ham fers the O .D . on b ars and tubes.R ange: 8-28m m .Includes: N G -3 handle, H .D . externalRotoD rive holder, and EX28 countersink.
SIMPLY SOPHISTICATED 12
HANDLES HOLDERS
H.D. RotoDrive HolderEL0802
H.D. ROTODRIVE N G 340040m m displacem ent allow s for heavyduty burrs to b e rem oved. C ontinuousrotation of countersink enables very fastcham fering .Includes: N G -3 handle, H .D . crankedR otoD rive holder and C 20 countersink.
NG-3 Handle N G 3000N ogaG rip-3 holds all blad e holders.D esigned for m axim um com fort inyour hand.
NG-1 Handle N G 1000N og aG rip-1 holds all S blad es(3.2m m ). D esigned for m axim umcom fort in your hand .
H.D. Ext. RotoDriveHolder EL0902
H eavy duty cranckedholder. External M 7 threadto hold C 12, C 20 and C 30countersinks.h 40m m .
H eavy duty cranckedholder. A ccep ts EX28
external countersink.h 40m m .
h
h
PATEN TED
PATEN TED
7/26/2019 NOGA_Deburring Tools Catalog
http://slidepdf.com/reader/full/nogadeburring-tools-catalog 12/30SIMPLY SOPHISTICATED 13
BLADES Order No. Weight (grams)
Holes
COUNTERSINKS
angle (degrees)Range (mm)
90 40EX28 EX3001
EXT. ROTODRIVE N G 1700C ham fers the O .D . on b ars and tubes.Q uickest w ay to cham fer O .D . onalm ost all m aterials.R ange: 4-18m m .Includes: N G -1 hand le andexternal R otoD riveEX18 countersink.
ROTODRIVE N G 1200The quickest w ay to cham fer by hand.Single flute countersink provides asm oother cut.Includes: N G -1 hand le andR D 10.4 R otoD rivecountersink.
External Shaft
All blades b elow are m ade of H .S.S.. H ardness 62-64R c.
EX2001 90 16EX18
90 58C30 BC3011
Package quantity
90 28C20 BC2011
90 25C12 BC1211
90 34BC1651
90 15BC1041
90 12BC8301
90 10BC6301
90 6BC3201
8-28
4-18
3-30
3-20
1-12
1-16.5
1-10.4
1-8.3
1-6.3
0-3
1
1
1
1
1
1
1
1
1
1
RD16.5
RD10.4
RD8.3
RD6.3
RD3.2
PATEN TED
PATEN TED
Countersinking
3.2m m R otoD rive
7/26/2019 NOGA_Deburring Tools Catalog
http://slidepdf.com/reader/full/nogadeburring-tools-catalog 13/30
MINI SCRAPER N G 3700Ideal for tool and die m akers.Includes: N G -3 handle, D holder,triangular m ini scrap er D 50 blad e andhex key.
SIMPLY SOPHISTICATED 14
BLADE & HOLDER
T 120 BT1200H eavy D uty scraping. D ouble ended.- M ade of C R 115.H ardness 58-60R c.- B lade dim ensions 7.4x120m m .- Includ ed ang le 60°.
SCRAPER SC 1000D ouble end scraper for longer tool life.C an be locked in requiredposition.
Includes: U ni-hand le anddoub le end ed T120triangular scraper.
SC Handle SC 1300
12m m anodized handle. K nurledlocking collar to control bladeextension.H olds: D 50, D 66, D 75, D 77 and T80scrap ers.Length: 120m m .H ex. 12m m .
NG-3 Handle N G 3000N ogaG rip-3 holds all blad e holders.D esigned for m axim um com fort inyour hand.
D HolderEL05003
D holder is designed to hold D 50and D 66 blades. A 3m m setscrewis holding the blade.H ex key included .Length: 131m m .
deburring
system
UNI Handle UH1000A unique H and le w hich can holdN oga T120 scraper blade.
HANDLES
7/26/2019 NOGA_Deburring Tools Catalog
http://slidepdf.com/reader/full/nogadeburring-tools-catalog 14/30SIMPLY SOPHISTICATED 15
BLADES Order No.Weight(grams)
SCRAPERS
Included angle(degrees)
A ll blades below have hardness 62-64R c, except D 55 C arbide 1400-1700 H V, and T80 C R115 58-60R c.
Packagequantity
ADJUSTABLE SCRAPERSC 8000Ideal for scraping, trim m ing and deburringalm ost all m aterials.Includes: 12m m anodized handle and T80double ended triangular scrap er.
Bushing Scraping Straight Edge HolesPipe Cross Holes
Width/Length(mm)
INTERNAL SCRAPER N G 3710Ideal for cross-holes deburring.Includes: N G -3 handle, D holder and Internal scrap erD 66 b lade.
D50
D55 Carbide
D66
D75
D77
T80
27
9
34
8
9
11
60
60
50
60
50
60
BD 5010
BD 5501
BD 6610
BD 7501
BD 7701
BT8001
10
1
10
1
1
1
2.5 x 50
2.5 x 50
2.7 x 50
2.5 x 75
2.7 x 75
4.2 x 80
7/26/2019 NOGA_Deburring Tools Catalog
http://slidepdf.com/reader/full/nogadeburring-tools-catalog 15/30
deburring
system
SIMPLY SOPHISTICATED 16
Adjustable Scraper YT1200
Adjustable Mini Scraper YT1100
YT Handle YT1000The perfect grip on:N og a adjustab le scrap ersN eedle filesPinsD rills•Q uick change•Fits every hand•Flexible colletR ang e: 2.2-4.5m m .
The b est m ini scrap er for tool and die m akers.Includes:YT hand le (YT1000) andD 75 H .S.S triangular m ini scrap er (B D 7501).Size: 75x2.5m m .
Ideal for scraping, trim m ing and deburring alm ost all m aterials.Includes:YT hand le (YT1000) andT80 d ouble end ed triangularm edium scraper (B T8001).Size: 80x4.2m m .
HANDLE
7/26/2019 NOGA_Deburring Tools Catalog
http://slidepdf.com/reader/full/nogadeburring-tools-catalog 16/30
Shape
SIMPLY SOPHISTICATED 17
YT PRODUCTSDIAMOND NEEDLE FILESSETS
The files are of Sw iss m ad e b lankselectroplated w ith ultra highconcentration of precisely g radeddiam ond particles. A m ust for any tooland die shop, extrud ers, and rep airs ofhardened alloys and ceram ic.
Total length - 140 m m .
C oated length - 70 m m .Shank - ø 3 m m .
G rit size: D 126
YT 3000 - Includes 5 files as show nbelow , D 75 H SS Triangular Scrap er,
T80 d ouble end ed triangular
Scraperand YT1000 handle.
YT 3300 - Includes 5 files and
YT1000 hand le.
YT3000 YT3300
Order No.
DT1050
DT1051
DT1052
DT1053
DT1054
BT8001
BD7501
Equaling
Triangular
Square
H alf round
Round
Triangular
Triangular
T80 B lade
D ouble end ed triangular scrap er.
D 75 B ladeH .S.S. triangular m ini scraper.
2.5x75
2.5
3.9
5.4x1.9
5.1x1.4
3.0
4.2x80
Width / Thickness(mm)
Width/Length(mm)
7/26/2019 NOGA_Deburring Tools Catalog
http://slidepdf.com/reader/full/nogadeburring-tools-catalog 17/30
NOGA O-RING BURRN G 1100R em oves burrs from internal O -ringgrooves.R ange: 0-3m m (groove w idth).Includes:N G -1 handle andO -ring blade.
SIMPLY SOPHISTICATED 18
HOLDERS
K Holder EL04003H olds K blades w ith M 3 screw .Length: 135m m .
NOGA V CUT N G 3200For deburring sheet m etal 1-8m m .Includes:N G -3 hand le, L holder and L3 blade.
NG-3 Handle N G 3000N ogaG rip-3 holds all blad e holders.D esigned for m axim um com fort inyour hand.
L Holder EL07013H olds L blad es. B lad es are held ina 3m m square hole and tightenedw ith 4m m setscrew .Length: 131m m .
NG-1 Handle N G 1000N og aG rip-1 holds all S blad es(3.2m m ). D esigned for m axim umcom fort in your hand .
deburring
systemPATEN TED
HANDLES
7/26/2019 NOGA_Deburring Tools Catalog
http://slidepdf.com/reader/full/nogadeburring-tools-catalog 18/30SIMPLY SOPHISTICATED 19
DOUBLE EDGE CUTTING
All blades are m ade of H .S.S.. H ardness 62-64R c excep t N 80M 42 and N 80K M 42, 65-67R c.
BLADES Order No.Included angle
(degrees)Range(mm)
35
33
5
30
29
9
6
6
9
8
55
55
55
55
55
55
50
50
40
90
10
10
1
10
10
1
1
1
1
1
0-12
0-12
1.2-8
2.4-11
2.4-11
3-15
1-8
0-2.5
1-3
M ax. 3
Package weight(grams)
Packagequantity
N80
N80M42
N70K
N80K
N80KM42
N90K
L3
L4
O-Ring
TC
BN8010
BN8043
BN7001
BN8110
BN8143
BN9009
BL3001
BL4001
BO 1001
BC1001
KEYWAY-BURR N G 3300Effectively rem oves b urrs from internaland external keyw ays.R ange: 2.4-11m m .Includes:N G -3 hand le, K holderand N 80K blade.
Internal Thread Small Ridges“O” Ring Groove Thin Sheet MetalKey WayKey Seat
DOUBLE BURR D B 1000Sim ultaneously rem oves burrs from bothsides of sheet m etal.D B handle w ith safety guard toprotect your hand .U nique round cutting blad escan b e rotated and reversedfor long life. For corners,use one blad e only.
R ange: 0-12m m .Includes:D B handle,hand guard andtw o N 80 b lades.
7/26/2019 NOGA_Deburring Tools Catalog
http://slidepdf.com/reader/full/nogadeburring-tools-catalog 19/30
deburring
system
SIMPLY SOPHISTICATED 20
To remove blade1. R em ove the cap from the rear of
the tool.2. Insert the cap in the round hole
and turn 90°.3. Pull the blad e out.
To insert blade1. Insert the b lade into the g roove.2. To secure the blade in place, hold
the blade and lightly tap thehandle against a solid surface.
CERA-CUT HandleCR2100A unique plastic handle that holdsthe blade by its self gripping taper.Storag e sp ace for spare b lad es.Length: 135m m .
BLADES Order No.Weight(grams)
Packagequantity Applications
Incl. angle(degrees)
Convexed C R 2200 90 9 1Ideal for surface cleaningand parting line deflashing
Concaved C R 2500 90 9 1Ideal for curved ed ges andsm all ridges
Material
C eram ic1250HV
C eram ic1250HV
HANDLE
CONCAVED CERA-CUT CR2300Ideal for all plastic m aterials and soft m etals. Ideal forcurved edges and sm all ridges. B lade can be rep laced.Includes: C era-C ut hand le and 15m m concaved radius blade.
CONVEXED CERA-CUTCR2000Ideal for all plastic m aterials andsoft m etals. Ideal for surfacescraping and parting line deflashing.B lade can be replaced.
Includes: C era-C ut hand leand 250m m convexed
rad ius blad e.
7/26/2019 NOGA_Deburring Tools Catalog
http://slidepdf.com/reader/full/nogadeburring-tools-catalog 20/30
Push
SIMPLY SOPHISTICATED 21
BLADES Order No.Weight(grams)
Packagequantity Applications
Straight Edge
CERAMIC TOOLS
Incl. angle(degrees)
Noga soft Cut C R 6000 65° 1 1Ideal for deburring softabrasive plastics
Noga hard Cut C R 6100 75° 1 1Ideal for deburring hardabrasive plastics
NOGA HARD CUT TOOL NC5200Ideal for deburring hard abrasive plastics
Includes:N ogaC ut handle N C 5000 andN ogaC ut blade 75° C R6100.
Surface ScrapingParting Line FlashThin Sheet Metal
Material
C eram ic1250HV
C eram ic1250HV
NOGA SOFT CUT TOOL NC5100Ideal for deburring soft abrasive plastics
Includes: N ogaC ut handle N C 5000 andN ogaC ut blade 65° C R6000.
HANDLE
NOGA-CUT HandleNC5000C an hold N ogaC ut blades onlyC R6000 & C R6100.
Holes
2 - Pull
1 - P u s h
To insert new blade To replace blade
C R 6000 C R 6100
7/26/2019 NOGA_Deburring Tools Catalog
http://slidepdf.com/reader/full/nogadeburring-tools-catalog 21/30
deburring
system
SIMPLY SOPHISTICATED 22
BLADES Order No.Weight(grams)
Packagequantity Applications
Incl. angle(degrees)
V Shaped C R 5100 90 90 1R em oves burrs from bothsides sim ultaneously
CERAMIC DOUBLE BURR
DB5000Ideal for deburring both sides of aw orkpiece sim ultaneously.B lade can be replaced.R ange: 1-11 m m .Includes:V-shap ed ceram ic blade m ounted inergonom ically designed D B handle
w ith safety guard to protect your hand.
Material
C eram ic1250HV
CERA-CUTCR1100Ideal for deburring plastics and othersoft m aterials. Extrem ely long life.D isposable tool.Includes:250m m convexed radius ceram icblad e, m ounted in ergonom icallyheld handle w ithsoft grip.
7/26/2019 NOGA_Deburring Tools Catalog
http://slidepdf.com/reader/full/nogadeburring-tools-catalog 22/30SIMPLY SOPHISTICATED 23
SETS
S T E L E S
E T
N G 8 3
5 0
I n c l u d
e s :
N
o g a G
r i p 3 h a
n d l e
S h o l d e
r
5 p c s
. S 1 0 b l a d
e s
5 p c s
. S 2 0
b l a d e s
.
N T E L E S
E T
N G 8 3
0 0
I n c l u d
e s :
N o g a
G r i p
3 h a n
d l e
N h o l d
e r
5 p c s
. N 1 b
l a d e s
5 p c s
. N 2 b
l a d e s
.
F r e e h
a n d l e N O
G A C U T S
E T C R
5 5 0 0
I n c l u d
e s :
5 p c s
. N o g
a C u t
b l a d e
s 6 5 °
C R 6 0
0 0
5 p c s
. N o g
a C u t
b l a d e
s 7 5 °
C R 6 1
0 0
N o g a
C u t h
a n d l e
N C 5 0
0 0.
F r e e h
a n d l e
S P R O
M O S E T N
G 8 1 5
0
I n c l u d
e s :
N o g a
G r i p
1 h a n
d l e
1 0 p c
s. S 1
0 b l a d
e s.
N P R O M
O S E T
N G 8 0
0 0
I n c l u d
e s :
N o g a
G r i p
2 h a n d l e
1 0 p c
s. N 1
b l a d
e s.
B e s t s
e l l e r
B 1 0 S
E T S G
6 0 0 0
I n c l u d
e s :
N o g a
G r i p
2 h a n
d l e
2 0 p c
s. B 1
0 B l a d
e s.
S E C O
N O M Y
S E T N
G 8 2 0
0
I n c l u d
e s :
N o g a
G r i p
1 h a n
d l e
2 0 p c
s. S 1
0 b l a d
e s.
N E C O
N O M Y
S E T N
G 8 0 5
0
I n c l u d
e s :
N o g a
G r i p
2 h a n d l e
2 0 p c
s. N 1
b l a d
e s.
F r e e h
a n d l e
7/26/2019 NOGA_Deburring Tools Catalog
http://slidepdf.com/reader/full/nogadeburring-tools-catalog 23/30
deburring
system
SIMPLY SOPHISTICATED 24
The 7 most popular deburringtools you need to carry for anydeburring application.Packed in one handy box.
Pack dimensions: 270x230x50mm.
THESET SP7700 Includes:
Adjustable Scrapr SC 8000Keyway Burr N G 3300“V” Cut N G 3200Mini Scraper N G 3700Countersink N G 3100Internal Scraper N G 3710Super Burr N G 3003
7/26/2019 NOGA_Deburring Tools Catalog
http://slidepdf.com/reader/full/nogadeburring-tools-catalog 24/30
GOLD BOX N G 9400The most complete box for professional machinists
Includes:N ogaG rip 3 hand leA djustable scrap erPlastic Edge O ff hand le.S holderN holderC holder+ C 20D holder+ D 50K holder+ N 80KB lad es: N 1, N 2, S10, S20, S30, S150, D 66 and 10.4C ountersink R otoD rive.H ex key (1.5m m ).
Pack dim ensions: 270 x 230 x 50m m
SIMPLY SOPHISTICATED 25
PLATINUM BOX N G 9500Collected to meet the total requirements of tooland die makers and for deburring specialists
Includes:D oub le B urrN ogaG rip 1 hand leN ogaG rip 3 hand leTed dy B urr handleS holderN holder
K holder + N 80KD holder + D 50D holder + D 66C holder + C 2018m m external R otoD rive blade10.4m m countersink R otoD rive.B lades: N 1, N 2, S10, S20, S30 and S150.H ex key (1.5m m ).
Pack dim ensions: 270 x 230 x 50m m
KITS
7/26/2019 NOGA_Deburring Tools Catalog
http://slidepdf.com/reader/full/nogadeburring-tools-catalog 25/30
deburring
system
SIMPLY SOPHISTICATED 26
SILVER UNIKIT N G 9300Most suitable for MRO
Includes:N ogaG rip 3 hand leS holderM ed ium reversible countersinkPlastic Edge O ff handle3.2m m R otoD rive countersink10.4m m R otoD rive countersink16.5m m R otoD rive countersink
18m m External R otoD riveB lades: S10, S20 and S30.
Pack dim ensions: 215 x 120 x 40m m
BRONZE UNIKIT N G 9200Most economical deburring kit for all machinists
Includes:N ogaG rip 3 hand leN holderS holderC holder + C 20D holder + D 50B lades: N 1, N 2, S10, S20, S30 and S150
Pack dim ensions: 215 x 120 x 40m m
PLASTIC EDGE OFF SET EO 2100The most economical set
Includes:EO hand le + S10 b lade, green sleeve (for alum inium )EO handle + S20 blade, red sleeve (for brass & cast iron)EO hand le + S100 b lade, blue sleeve (for steel)EO handle + S150 b lade, yellow sleeve (for plastic)
Pack dim ensions: 222 x 78 x 22m m
7/26/2019 NOGA_Deburring Tools Catalog
http://slidepdf.com/reader/full/nogadeburring-tools-catalog 26/30SIMPLY SOPHISTICATED 27
SETS AND KITSNOGA TROUBLE SHOOTER SETSP1010Deburring, Scraping and countersinking
Includes:R B handleS20 bladeS100 bladeS150 bladeR D 16.5 R otoD rive countersink
R D E18 External R otoD rive countersinkD 50 M od ified M ini Scrap er blad e
Pack dim ensions: 125 x 78 x 48m m
Step 3: Push sleeve dow n w hile pushingscraper to its final position.
A dvantages:1. The hand le can hold both types of blad es rotating and fixed.2. The set includ es b est m oveable/pop ular blades.
The new M A G IC SET includesR apid B urr R B 1000 and m odifiedD 50 M ini Scraper B lade.
D Scraper blade
Step 1: Insert the Scraper and gentlypush until it stops by the ball.
Step 2: R otate Scraper until itslides in under the ball.
S Swivel blade
To insert S blade, push black sleeve d ow nw hile pushing the blad e into hand le.
MAGIC SET RB4000
7/26/2019 NOGA_Deburring Tools Catalog
http://slidepdf.com/reader/full/nogadeburring-tools-catalog 27/30
deburring
system
SOFT GRIP SG 1000
Ergonom ically heldhandle. Tw o holes acceptsboth S and N blades.
Includes: SG hand le, S100and N 10 cob alt blades.
SIMPLY SOPHISTICATED 28
ø 3.2 mm
ø 2.6 mm
LIZA BURR L B 1 0 00
D oub le end blade holderto utilize both N and Sblades. Telescopes from20-110m m w ith N blades.20-94m m w ith S blades.
Includes: U ni-hand le, SNholder, N 1 and N 2 blades.
LEADER N G 3800
C ham fering straight orcurved ed ges. Ensures45° cham fering .Includes: N G -3 hand le,LD holder and L1 b lade.
UNIVERSAL HANDY
CHUCK HOLDER
P V 1 0 0 0
A lum inum handle w ith nonslip covering.
A 3 jaw chuck helps w ith thequick and secure clam pingof a w ide variety of tools,
blad es and blad e holderssuch as scrap ers,countersinks, files etc.
H ardness 58H R C .
1. Hold handle in left hand and blade in right hand.2. Push blade in and turn clockwise simultaneously.
TO REMOVE BLADE: Repeat as above but pull out.
TO INSERT BLADE:
7/26/2019 NOGA_Deburring Tools Catalog
http://slidepdf.com/reader/full/nogadeburring-tools-catalog 28/30
SPECIALTY TOOLS
SIMPLY SOPHISTICATED 29
Shallow Steps Cross HolesStraight EdgeCurved EdgeHoles Deep Holes
NOGA MINI CUT
N G 3220
U sed for deb urring sm allridges in difficult to reachplaces.R ange: 0-2.5m m .Includes: N G -3 hand le.L holder and L4 blade.
NOGA CORNER
CLEANER N G 3230
Effective corner relief.W ide range ofapplications.Includes: N G -3 hand le.L holder and L6 blade.
THREAD CLEANER
N G 1600
For cleaning dam agedinternal threads. M inim umD ia. 9m m . M axim umthread pitch 3m m .Includes: N G -1 handle and
TC blade (See page 19).
NOGA SLOT
CLEANER N G 3210
U sed to relieve corners ofnarrow slots from 3.5m m .Includes: N G -3 hand le,L holder and L5 blade.(L7 double end blade forcutting in tw o directions isalso available)
7/26/2019 NOGA_Deburring Tools Catalog
http://slidepdf.com/reader/full/nogadeburring-tools-catalog 29/30
deburring
system
SIMPLY SOPHISTICATED 30
PLASTIC RAPID
BURR R B 1 4 0 0
H olds all S blad es(3.2m m ). The blad e isreplaceable.Includes: plastic handleand S 100 blade.
PLASTIC EDGE OFF
EO 2000
M ost com petitive tool.H olds all S blad es(3.2m m ). The blad e isreplaceable.Includes: plastic handleand S10 blade.
PLASTIC REAMER
S P 8 1 0 0
D eb urr both inside andoutside ed ges of tub e.M ad e of plastic b od y.H ave 3 cutters.R eam er for alum inum ,brass and copper tubing.R ange: 4-42m m .
NOGA TRIORB3000
Standard set
Includes:R B hand le + S 20 b lad e,red sleeve (brass & cast iron)
R B h and le + S 100 blad e,blue sleeve(steel & alum inium )
RB handle + S150 extrafine blade, yellow sleeve(plastic)
Pack dim ensions:175 x 50 x 20m m
7/26/2019 NOGA_Deburring Tools Catalog
http://slidepdf.com/reader/full/nogadeburring-tools-catalog 30/30
SPECIALTY BLADESOrder No.
BN1029
BN1028
BN2031
BN1026
BN1027
BS1016
BS1014
BS1011
BS1013
BS1019
BS2015
BK1011
BK1012
BK3103
BS3003
BS6003
BS8001
BS8003
BS7001
BS1510
N1 Carbide
N1 Diamond
N2 Carbide
N1 LH
N1 LH TiN
S10 Carbide
S10 Diamond
S10 LH
S10 LH TiN
S100 TiN
S20 Carbide
S101 LH
S101 TiN
S150 TiN
S30 TiN
S60 TiN
S80
S80 TiN
S70
BS1500
L1
L5
L6
BL1001
BL5001
BL6001
Blades Works best on
hardened steel & special plastics
glass & ceram ics
hardened steel & hard plastics
steel, alum inum & plastic
steel, alum inum & plastic. For long life.
hardened steel & plastic
glass & ceram ics
steel, alum inum & plastic
steel, alum inum & plastic. For long life.
stainless steel & plastic. For long life.
hardened m aterials & plastic
H .D . shank for steel, alum inum & plastic
H .D . shank for steel, alum inum & plastic. For long life.
holes as sm all as 1.5m m D ia. For long life.
both int. & ext. burrs. For long life.
cross holes in difficult to reach places. For long life.
shallow steps
shallow steps. For long life.
straight edges
Special blade for deburring rubber and soft m aterials
steel and alum inum
slots from 3.5m m
sharp corners
LH
LH
LH
LH
LH
L/R
L/R