acc config activateRobustReconfiguration

y

get config countdown

lt all

acc config deactivateRobustReconfiguration

y

acc config activateRobustReconfiguration

wait 40

yget config countdown

st

set ConfigurationVersion=1 configOpCountdown 1800

amos

inv - to check inventorybo- to check present boardst/lst--- pritn state of MO

bor-- forces to read MO data

sti - to show all IP inter face sts---- display state and confeguration of nw synchronizationdbl-deblockbl-lock

bl[s]/lbl[s] ||***************************************************************************************Lock or soft-lock MO(s).

Works by setting the administrativestate to 0 (hard-lock) or 2 (soft-lock).The "s" option is for soft-lock. The administrativestate is set to 2 ("shutting down") which means that the resource will have a grace period to handover traffic to other resources, before it gets locked. The administrativestate will automatically go over to 0 after the grace period, which can be between a few seconds to a couple of minutes, depending on the MO type.Without the "s" option, the resource is locked immediately.To unlock an MO, use the command "deb/ldeb".

Examples:block aal2paths ca2, ca4, ca6 >> bl aal2.*ca[246]block all MO's under subrack=ms,slot=19 >> lbl subrack=ms,slot=19block proxys 234, 256, and 248 >> bl 234 256 248block a board >> bl 001500 (equivalent to: lbl subrack=ms,slot=15,pluginunit=1$)soft-block a board >> bls 001500Note: there is also an OSE command called bl.If you need to run the OSE command instead of the moshell command, just type a "\" in front.Example:st/lst Print state of MOs (operationalState and administrativeState when applicable).rdel/lrdel Delete MO(s) together with children and reserving MOs.facc/lfacc Perform actions that are not defined in the MOM ("Force" action).str[123ft] Print status of the IubLinks/AbisLinks and their associated Cells and Channels (RNC/BSC only).!/l Execute a unix command on the PC/workstation.dbc[s][a] Database consistency check

***************************************************************************************

The "s" option is for soft-lock. The administrativestate is set to 2 ("shutting down") which means that the resource will have a grace period to handover traffic to other resources, before it gets locked. The administrativestate will automatically go over to 0 after the grace period, which can be between a few seconds to a couple of minutes, depending on the MO type.

If you need to run the OSE command instead of the moshell command, just type a "\" in front.

st/lst Print state of MOs (operationalState and administrativeState when applicable).

str[123ft] Print status of the IubLinks/AbisLinks and their associated Cells and Channels (RNC/BSC only).

The "s" option is for soft-lock. The administrativestate is set to 2 ("shutting down") which means that the resource will have a grace period to handover traffic to other resources, before it gets locked. The administrativestate will automatically go over to 0 after the grace period, which can be between a few seconds to a couple of minutes, depending on the MO type.

The "s" option is for soft-lock. The administrativestate is set to 2 ("shutting down") which means that the resource will have a grace period to handover traffic to other resources, before it gets locked. The administrativestate will automatically go over to 0 after the grace period, which can be between a few seconds to a couple of minutes, depending on the MO type.

The "s" option is for soft-lock. The administrativestate is set to 2 ("shutting down") which means that the resource will have a grace period to handover traffic to other resources, before it gets locked. The administrativestate will automatically go over to 0 after the grace period, which can be between a few seconds to a couple of minutes, depending on the MO type.

ma/lma Add MO(s) to an MO group.st/lst Print state of MOs (operationalState and administrativeState when applicable).lko/llko Obsolete command, use lk/llk instead.bl[s]/lbl[s] Lock or soft-lock MO(s).deb/ldeb Unlock MO(s).inv[hlxpbcr] Complete HW/SW inventory. Includes information about RPUs, licensing, JVM, devices, XPs, ISL, etc.std[ar] Display state and configuration of devices (RNC and MGW only).ste[gr] Display state and configuration of Ethernet Ports.sti[bcfopr] Display state and configuration of IP interfaces.sts Display state and configuration of Network Synchronization.str[123ft] Print status of the IubLinks/AbisLinks and their associated Cells and Channels (RNC/BSC only).lkr[a] Print RNC Iub resources allocation.ir[cdpso] Iub Redundancy operations for RNC in pool.tg[r][c][d] Print Resource Object information for all MOs in LmCell (RNC only).ced[h][p][s][g][r] Print consumption of cell resources and rbs hw, cell supported features, cell coordinates (RNC only).lg[abcdefghijklmnopqrstuvwxyz12345] Fetching and processing of node logsose/coli command Send COLI commands to the CPP node's OSE shell. Type "h ose" for syntax help and "?" to view available commands.bo[ar]/ba[swdpmu]/br[wdm]/be[0-50]/bp Manage board groups that can be used for running COLI commands on multiple boards.

st/lst Print state of MOs (operationalState and administrativeState when applicable).

inv[hlxpbcr] Complete HW/SW inventory. Includes information about RPUs, licensing, JVM, devices, XPs, ISL, etc.

str[123ft] Print status of the IubLinks/AbisLinks and their associated Cells and Channels (RNC/BSC only).

ced[h][p][s][g][r] Print consumption of cell resources and rbs hw, cell supported features, cell coordinates (RNC only).

ose/coli command Send COLI commands to the CPP node's OSE shell. Type "h ose" for syntax help and "?" to view available commands.bo[ar]/ba[swdpmu]/br[wdm]/be[0-50]/bp Manage board groups that can be used for running COLI commands on multiple boards.

st/lst [||] []***************************************************************************************Print state of MOs (operationalState and administrativeState when applicable).

It is similar to writing "get/lget state", the only difference is that it presents the two states side-by-side in a more visible way.The state filter matches towards both the Operational state and the Administrative state.Examples:view state of all MO's >> stview all disabled MO's >> st . disview all disabled MO's under "Equipment" >> lst equip disview all MOs who are unlocked and disabled: >> st . 1.*0view all MOs who are locked: >> st . ^0view state of all MO's under "Sector" (in RBS) >> lst sectorview state of all channels in all 3 cells in the RBS >> lst cellview state of all channels in cells starting with 120 (in RNC) >> lst cell=120

***************************************************************************************

It is similar to writing "get/lget state", the only difference is that it presents the two states side-by-side in a more visible way.The state filter matches towards both the Operational state and the Administrative state.

get 1579 1581

get iphosthet ipaccessget ipsync

1577 IpOam=1 ping 1 1577 IpOam=1 traceRoute

acc--- action on moacl-- action listacc 1577 pingacc 1577 traceroute

1580 Ip=1,IpRoutingTable=1 addStaticRoute 5 1580 Ip=1,IpRoutingTable=1 deleteStaticRoute 1 1580 Ip=1,IpRoutingTable=1 getRoutingTableEntry 1 1580 Ip=1,IpRoutingTable=1 listRoutes 0 1580 Ip=1,IpRoutingTable=1 modifyStaticRoute 2 1580 Ip=1,IpRoutingTable=1 numberOfRoutes 0 1581 Ip=1,IpHostLink=1 assignIpAddress 6 1582 Dhcp=1 addDhcpServerAddress 1 1582 Dhcp=1 removeDhcpServerAddress 1 1584 IpAccessHostEt=1 ping

Sheet1Sheet2cvACC & FACCwait commandsrobust commandBOard comman dboinvST -tstip addressmtuSizegetgall ipsgetacc & acl