NOA Product catalogue 2011

Covering frames and boat accessories

Cockpit table frame

Product guide 2011

New for 2011

A new design of our telescopic lock. Simple constuction, stronger grip.

A new design of locks. For easier and faster connections of tubes in our covering frame system.

NOA fitting 30 mm, 32 mm and 38 mm

Turning solar panel mount with sturdy vertical 40 mm aluminum tube. Turns and angles 360 degrees. The mount fits to the deck or transom. The base can angle 180 degrees.

Maintain the value of your boat with NOA’s covering system

Once summer has passed it is time to take care of your boat. Even though this may not be the highlight of the boating season, it may very well be the most important. A lot can be gained by taking the time to avoid mistakes. At NOA we have more than 25 years of experience of covering boats. We know what is required in order to care for your boat when it is not in use. We have developed a modular system so that the covering is tailor made to provide the best possible storage.

NOA is Scandinavia’s leading producer of covering frames. All frames are made of aluminium and stainless steel (A4) which ensures a durable and long lasting product. NOA’s unique fittings guarantee an easy and quick assemble of the frame. The frame has no sharp edges that can scratch the gel coat, harm the pulpit or ruin the tarpaulin.

There is a NOA solution for almost all pleasure crafts due to our assortment of covering frames. If you decide to change boat, we will of course help you to adjust your NOA frame so that it fits your new boat.

1. Storage locationRegardless whether you place your boat on stands, in a cradle or on a trailer, choose a place which is level and protected from the wind. Also make sure that this is not an area where water gathers, nor that ti is an area with a lot of vegetation which attracts mice and other vermin.

2. Stands and cradlesIf you are keeping your boat at a marina, check what rules apply regarding stands and cradles. Make sure that there is no or little weight on stanchions. Consult the manual from the manufacturer of the stanchions for the best possible result.

3. Covering frameChoose a covering frame which is light but of highest quality which will not harm neither boat nor tarpaulin, preferably a NOA covering frame. Make sure you buy a covering frame that suits your needs. If, for example, you are going to refurbish your boat, we suggest you take a closer look at our boat houses.

4. TarpaulinChoose a good quality tarpaulin which can withstand the elements such as snow, ice, sun and strong winds. Moisture will always rise from the ground and stick to the inside of the tarpaulin. It is therefore important to have good ventilation, both in the fore and aft.

5. CheckAfter everything is in place, make sure that there are no holes or ruptures in the tarpaulin where water can leak through. Make sure that there is enough ventilation.

6. VisitAlways visit your boat after storms and severe rains. Your frame may be intact but somebody else’s might have harmed yours.

Vinter store your boatsix hints and guidelines

The advantage of the A-frame is that the A-legs take the load of the wind pressure against the boat as the legs stand directly on the ground. The A-legs lift the tarpaulin so that air enters both fore and aft which ensures excellent ventilation. The deck-legs are placed against the edge of the gunwale, the cabin roof, other suitable place on deck or alternatively in the cockpit to ensure outstanding stability. Both the A-legs as well as the deck-legs are telescopic.The A-frame is suitable for sail boats and motor boats without pulpits and pushpit. The A-frame is available in eight different lengths.

Item number A-frame

10205 A-frame 5 meter10206 A-frame 6 meter10207 A-frame 7 meter10208 A-frame 8 meter10209 A-frame 9 meter10210 A-frame 10 meter10211 A-frame 11 meter10212 A-frame 12 meter

8

A-frame 5m – 12m

The deck-frame is suitable for all sail boats and motor boats with a pulpit and pushpit. The frame sits securely on the boat with the aid of NOA fittings. The deck legs are placed against the edge of the gunwale, the cabin roof, other suitable place on deck or alternatively in the cockpit to ensure outstanding stability. The deck frame is available in 10 different lengths.

A deck frame can be converted to an outlaying frame, see page 13.

Item number Deck frame

10107 Deck frame 7 meter10108 Deck frame 8 meter10109 Deck frame 9 meter10110 Deck frame 10 meter10111 Deck frame 11 meter10112 Deck frame 12 meter10113 Deck frame 13 meter10114 Deck frame 14 meter10115 Deck frame 15 meter10116 Deck frame 16 meter

9

Deck frame 7m - 16m

10

The outlaying frame is perfectly suited for sailboats with pushpit, pulpit and guard rail. As the frame keeps the tarpaulin out from the sides of the hull, the outlaying frame provides especially good ventilation and prevents tha tarpaulin from rubbing against the hull. The frame is adjustable in two directions; in height by means of telescopic legs and in distance from the boat by means of the fastening legs fitted to the stanchion base

OBS! Some boats are equiped with a stanchion peg instead of a traditional stanchion base. Be sure to specify this when ordering your outlaying frame.

Item number Outlaying frame10402 Outlaying frame 8 meter, 2 stanchion base10403 Outlaying frame 8 meter, 3 stanchion base10413 Outlaying frame 9 meter, 3 stanchion base10414 Outlaying frame 9 meter, 4 stanchion base10426 Outlaying frame 10 meter, 3 stanchion base10427 Outlaying frame 10 meter, 4 stanchion base10437 Outlaying frame 11 meter, 4 stanchion base10438 Outlaying frame 11 meter, 5 stanchion base10446 Outlaying frame 12 meter, 4 stanchion base10447 Outlaying frame 12 meter, 5 stanchion base10460 Outlaying frame 13 meter, 4 stanchion base10461 Outlaying frame 13 meter, 5 stanchion base10465 Outlaying frame 14 meter, 5 stanchion base10466 Outlaying frame 15 meter, 5 stanchion base10467 Outlaying frame 16 meter, 5 stanchion base

Outlying frame 8m - 16m

Stanchion base with peg

11

The boat house is an excellent facility when you require extra space around the boat for such activities as maintenance or repair of the hull and you will never have to worry about the weather. The NOA boat house is made-to-measure and incorporates our standard parts.

Item number Boat house75350 Boat house

Boat house

Item Tube dimension

1 Ridge 35 mm 9 Lock 2 Foot 35 mm 10 T-connector3 Beam 35 mm 11 X-connector 4 Gable 35 mm 12 NOA fitting 30-35 5 Pole 35 mm6 Base 35 mm7 Stay 30 mm8 Stay 30 mm

91

23

4

5

6

7

8

10

11

12

AccessoriesNOA’s covering frame system is based on modular thinking. You should be able to change your covering frame as your needs change, for instance, when you buy a new boat. The combination are endless. Below you find a couple of examples, but ultimately, it’s only your imagination which sets the limit.

Deck legsIs your boat longer than the last one? Complement your frame with an extra pair of telescopic deck legs. Choose between plastic feet or a fitting for the NOA fitting. Also complete the top horizontal tube and lock.

Item number deck legs10310 Telescopic legs (pair) 1,5-2,3 m10311 Telescopic legs (pair) 0,9-1,7 m10312 Telescopic legs (pair) 0,7-1,2 m with end fitting10313 Telescopic legs (pair) 0,9-1,7 m with end fitting10340 Top horizontal tube 2,5 m10341 Top horizontal tube 2,0 m10356 Lock for top horizontal tube10802 NOA fitting 25 mm

Complement an A-frame to Outlaying frameAn A-frame can easily be converted to an outlaying frame provided that the boat has guard rail.

Item number A-frame to Outlaying frame10302 Stanchion base fitting (pair)10303 A-leg connection (pair)10305 NOA-fitting for outlaying frame tube (pair)10331 Outlying tube 2 x 9 m10332 Outlying tube 2 x 10 m10333 Outlying tube 2 x 11 m10361 Lock outlying tube10327 Curved stern fitting 3,0 m 10328 Curved stern fitting 2,5 m10329 Curved stern fitting 2,0 m

Komp A-ställn täckn 990.5p

12

Complement a Deck frame to Outlaying frameA deck frame can be converted to an outlaying frame to ensure even better ventilation - however, the boat must be equiped with guard rail.

Item number Deck frame to Outlaying frame10301 Pulpit leg extender (4 pieces) 10302 Stanchion base fitting (pair)10305 NOA-fitting outlaying tube 10331 Outlaying tube 2 x 9 m10332 Outlaying tube 2 x 10 m10333 Outlaying tube 2 x 11 m10361 Lock outlaying tube10327 Curved stern fitting 3,0 m 10328 Curved stern fitting 2,5 m10329 Curved stern fitting 2,0 m

Complement A-frameIf your new boat has a pulpit, you can easily complement your A-frame with an extra pair of deck-legs and a NOA-fitting to ensure a stable fit without harming the pulpit.

Item number complement A-frame10312 Telescopic legs (pair) 0,7-1,2 m with end fitting10313 Telescopic legs (pair) 0,9-1,7 m with end fitting10802 NOA fitting 25 mm

13

Accessories covering frame

14

10301 Pulpit leg extension (4 pieces)

10302 Stanchion base fitting (pair)

10303 A-leg connection (pair)

10304 - Pulpit connection

10310 Telescopic legs (pair) 1,5 - 2,3 m10311 Telescopic legs (pair) 0,7 - 1,7 m

10305 NOA fitting for outlaying tube (pair)

10312 Telescopic legs with end fitting (pair) 0,7 – 1,2m10313 Telescopic legs with end fitting (pair) 0,9 – 1,7m

15

10342 - A-benpar (2,5-3,2m) med stag10343 - A-benpar (2,5-3,8m) med stag10344 - A-benpar (2,5-4,3m) med stag10345 - A-benpar (2,5-4,8m) med stag

10330 Outlaying tube 2x8m10331 Outlaying tube 2x9m10332 Outlaying tube 2x10m10333 Outlaying tube 2x11m10334 Outlaying tube 2x12m10335 Outlaying tube 2x13m10336 Outlaying tube 2x14m10361 Lock outlaying tube

10329 Curved stern fitting 2,0m10328 Curved stern fitting 2,5m10327 Curved stern fitting 3,0m

10351 T-connection 35 mm

10352 Allen key 8 mm

10350 Telescopic lock

10356 Lock for top horizontal tube

16

10510 Aluminium tube 35mm10511 Aluminium tube 30mm10512 Aluminium tube 25mm10340 Top horizontal tube 2,5m10341 Top horizontal tube 2,0m

10802 NOA-fitting incl. bolt + nut

10811 NOA-fitting 30-35 for A-stay incl. bolt + nut

11501 End fitting

11504 Two-pronged end fitting 25mm

11505 Two-pronged end fitting 30mm

11522 End cap 25mm11520 End cap 30mm11521 End cap 35mm

17

11620 NOA bag

11523 End plug 25 mm11524 End plug 30 mm11525 End plug 35 mm

11701 Knob 20 mm

11703 Knob 35 mm

11720 Nut M811755 Bolt M8x40

45215 Cross fitting 35 mm

45214 Corner fitting 35 mm

45216 Cross/corner fitting 35 mm

A. B. C. C. Lenght of frame A-leg max lenght Stay lenght No of deck legs No of deck legsItem no: in meter 0,9-1,7m, min-max 1,5-2,3m, min-max10205 5 3,2 0,9 2 -10206 6 3,2 0,9 2 -10207 7 3,8 1,5 4 -10208 8 3,8 1,5 4 -10209 9 4,3 2,0 2 210210 10 4,3 2,0 2 410211 11 4,8 2,5 2 410212 12 4,8 2,5 2 4

A-Frame

Deck frame A. B. C. C. Lenght of frame No of pulpit legs No of pushpit legs No of deck legs No of deck legsItem no: in meter 0,7-1,2m, min-max 0,9-1,7m, min-max 0,9-1,7m, min-max 1,5-2,3m, min-max10106 6 - - 5 -10107 7 2 2 4 -10108 8 2 2 4 -10109 9 2 2 2 210110 10 2 2 2 410111 11 2 2 2 410112 12 2 2 2 4

Outlaying frame A. A. A. A. A. A. Lenght of Stanchion- No of legs No of legs No of legs No of legs No of legs No of legs Max width Item no: frame in m. base/side 0,9-1,7 0,9-2,05 1,5-2,3 1,25-2,55 1,5-2,8 2,0-3,3 of boat 10402 8 2 2 - 2 - - - 3,310403 8 3 2 - 4 - - - 3,310413 9 3 2 - 4 - - - 3,310414 9 4 2 - 6 - - - 3,310423 10 3 2 - 4 - - - 3,310424 10 4 2 - 6 - - - 3,310426 10 3 2 - 4 - - - 3,710427 10 4 2 - - 8 - - 3,710434 11 4 2 - - 8 - - 3,710435 11 5 - 2 - 8 - - 3,710437 11 4 - 2 - - 4 2 4,210438 11 5 - 2 - - 4 4 4,210444 12 4 - 2 - 8 - - 3,710445 12 5 - 2 - 8 - - 3,710446 12 4 - 2 - - 4 2 4,210447 12 5 - 2 - - 4 4 4,2

18

A. B. C. C. Lenght of frame A-leg max lenght Stay lenght No of deck legs No of deck legsItem no: in meter 0,9-1,7m, min-max 1,5-2,3m, min-max10205 5 3,2 0,9 2 -10206 6 3,2 0,9 2 -10207 7 3,8 1,5 4 -10208 8 3,8 1,5 4 -10209 9 4,3 2,0 2 210210 10 4,3 2,0 2 410211 11 4,8 2,5 2 410212 12 4,8 2,5 2 4

A. B. C. C. Lenght of frame No of pulpit legs No of pushpit legs No of deck legs No of deck legsItem no: in meter 0,7-1,2m, min-max 0,9-1,7m, min-max 0,9-1,7m, min-max 1,5-2,3m, min-max10106 6 - - 5 -10107 7 2 2 4 -10108 8 2 2 4 -10109 9 2 2 2 210110 10 2 2 2 410111 11 2 2 2 410112 12 2 2 2 4

A. A. A. A. A. A. Lenght of Stanchion- No of legs No of legs No of legs No of legs No of legs No of legs Max width Item no: frame in m. base/side 0,9-1,7 0,9-2,05 1,5-2,3 1,25-2,55 1,5-2,8 2,0-3,3 of boat 10402 8 2 2 - 2 - - - 3,310403 8 3 2 - 4 - - - 3,310413 9 3 2 - 4 - - - 3,310414 9 4 2 - 6 - - - 3,310423 10 3 2 - 4 - - - 3,310424 10 4 2 - 6 - - - 3,310426 10 3 2 - 4 - - - 3,710427 10 4 2 - - 8 - - 3,710434 11 4 2 - - 8 - - 3,710435 11 5 - 2 - 8 - - 3,710437 11 4 - 2 - - 4 2 4,210438 11 5 - 2 - - 4 4 4,210444 12 4 - 2 - 8 - - 3,710445 12 5 - 2 - 8 - - 3,710446 12 4 - 2 - - 4 2 4,210447 12 5 - 2 - - 4 4 4,2

19

20

Radar- and wind generator mountsNOA is Scandinavia’s leading manufacturer of radar mounts. The mounts fit all sailing boats and are available in two diffrent pole diameters, 50 mm or 80 mm.Standard length including the adjustable base is 2100 mm. Other lenghts can be manufactured on order.Radar- and wind generator mounts can also be order in white powder coat.

Item number Radar- and wind generator mounts10620 Radar mount 50 mm x 2100 mm, strut 1500 mm, adjustable top plate10621 Radar mount 80 mm x 2100 mm, strut 1500 mm, adjustable top plate10622 Radar mount 50 mm x 2100 mm, strut 1500 mm, fixed top plate10623 Radar mount 80 mm x 2100 mm, strut 1500 mm, fixed top plate10624 Wind generator mount 50 mm x 3000 mm, strut 1800 mm

Accessories and spare parts10633 Adjustable base for 25 mm strut 10835 NOA-fitting, 50 mm 10836 NOA-fitting, 80 mm 10837 NOA-fitting, 80 mm - for NOA-fitting 25 mm (pushpit-mount) 10842 GPS connector radar mount 50 mm/80 mm11561 Sleeve for wind generator mount (Rutland 913)11562 Sleeve for wind generator mount (Rutland 503)

Solar panel mountsA Solar panel mount which is securely fastened in the push-pit with NOA fittings.B Adjustable solar panel mount. Fastened with NOA fittingsC Turning solar panel mount which rotates horizontally as well as vertically.

21

Item number solar panel mounts10603 Antenna mast10604 Solar panel mount, stay extrusion 650 mm (A)10606 Adjustable solar panel mount, stay extrusion 650 mm (B)10608 Turning solar panel mount, 600 x 1800 mm, stay extrusion 650 mm, vertical tube 30 mm (C)10609 Turning solar panel mount, 600 x 1800 mm, stay extrusion 650 mm, vertical tube 40 mm, adjustable base10639 Turning solar panel mount, 600 x 1800 mm, stay extrusion 650 mm, vertical tube 50 mm, adjustable base, 2 x 1500 mm struts

A B C

22

10602 Anchor davit Includes NOA fitting10702 Support leg anchor davit Spare part, incl NOA fitting

10605 Anchor holder Includes NOA fitting

10617 Chain container 550 x 80 mm Includes NOA fitting

The anchor is kept away from the hull

580 mm

Lifts the anchor over the push-pit

The anchor davit runs on both way

23

350mm

Montering i en böj på pushpiten med diagonalstag

Montering på ettrakt rör i pushpiten

Kapas till lämplig längd

Diagonalstag

Artikelnummer 10636

(Extra tillbehör)

Fällbar sitsArtikelnummer 10618

350mm




Diagonalstag

Artikelnummer 10636

(Extra tillbehör)


On a straight tube In a corner with diagonal stay

The leg cuts in suitable length

Diagonal stay

350mm




Diagonalstag

Artikelnummer 10636

(Extra tillbehör)


350mm




Diagonalstag

Artikelnummer 10636

(Extra tillbehör)


10618 Teak seat, 350 x 270 mm Includes NOA fittings10636 Diagonal stay Includes NOA fitting

10619 Outbord mounting plate 200x90x47

10822 Outboard mount teak 195 x 120 x 18 mm Excluding NOA fitting

10601 Mast top fitting Includes NOA fitting

24

10802 NOA fitting 25 mm for covering frames incl bolt and nut

10803 NOA fitting 25 mm10806 NOA fitting 22 mm10807 NOA fitting 30 mm10847 NOA fitting 32 mm10848 NOA fitting 38 mm

10809 NOA double fitting 25 mm

10814 NOA cross fitting 25 mm10815 NOA cross fitting 30 mm (30 mm without sleeve)10845 NOA cross fitting 40 mm

10818 NOA fitting 25 mm Round corners

10819 NOA fitting 25 mm Hinge, for anchor davit

10813 NOA stay fitting10820 Life-buoy holder Excluding NOA fitting

25

10821 Anchor hook Excluding NOA fitting

10824 Antenna plate large 90 x 115 mm Excluding NOA fitting

10825 Antenna plate small 34 x 115 mm Excluding NOA fitting

10827 Boom eye Excluding NOA fitting

10832 Boom holder, dia 100 mm Excluding NOA fitting

10625 Davit 1550 x 65 mm, arm 600 x 35 mm Includes NOA fittings Rope and block not included

26

10826 Flagpole holder Excluding NOA fitting

10836 NOA fitting 80 mm

10835 NOA fitting 50 mm

10831 Hook, 95 x 50 mm Excluding NOA fitting

10830 U-holder For vertical mountings

10829 L-shape holder For vertical mountings

27

10837 NOA fitting for pulpit10838 NOA fitting for pulpit incl. NOA fitting 25 mm

30700 Jack

30703 Jack, w. aluminium socket11709 Knob w. nut M8, for turning solar panel mount

11705 Knob w. bult M8x30, for adjustable solar panel mount

11510 Plastic sleeve 25 mm11511 Plastic sleeve 22 mm11512 Plastic sleeve 28 mm11513 Plastic sleeve 30 mm11514 Plastic sleeve 32 mm11515 Plastic sleeve 38 mm

Item number Lagun30605 Lagun cockpit table frame30750 Lagun cockpit table frame Leg 750 mm

Accessories Lagun30607 Extra mounting plate

Lagun Cockpit table frameIt is the perfect solution for mounting tables in the cockpit, both for manufactures as well as for boating enthusiasts. The cockpit table frame is brilliant, it gives you a great freedom of movement. It is perfect to set up after a day of sailing and have a few drinks with your favorite mates!The frame is made of anodized aluminium. Bolts, nuts and screws are made of stainless steel, grade A4.

The mounting plate is easy to fit in the cockpit. An extra mounting plate allows you to use your table in other places, for instance in the cabin. It is easy to stow away the table when not in use.

Arm 400 mm

Leg 500 mm

Mounting plate100 x 170 mm

Up or down

Turns 360degrees

Mounting plate under table200 x 300 mm

Table top turns 360 degrees

28

29

Item number MPT and Rod holder10640 NOA Rod holder, inside diameter 30 mm, incl NOA fitting10641 NOA Rod holder, inside diameter 36 mm, incl NOA fitting30505 MPT Multi Purpos Tray, excl. cockpit table frame30506 MPT Multi Purpos Tray, cutting board only 750 x 400 mm30508 MPT Multi Purpos Tray, incl. MPT cross-fitting for rail mount35505 MPT Multi Purpos Tray, incl. cockpit table frame, leg 500 mm35520 MPT Multi Purpos Tray, incl. cockpit table frame, leg 750 mm

MPT - Multi Purpose TrayFish cleaning table with a table-top made of Densetec. The table rotates and tips. The tip function has a lock for easy transportation and storage. Table top size 750 x 400 mm. The leg comes in two different lenghts, 500 or 750 mm. The table-top can also be fitted on the push-pit with MPT cross fitting, item number 30507.

clean turn and tip over rinse

30

30619 Lomas, mounting plate 120x230x15 mm

30618 Robin, child seat For children up to 20 kg

30651 Pepe, child seat For children up to 20 kg

30600 Rimini 850x540 mm30601 Rimini 700x420 mm32005 Rimini 850x540 mm incl. cockpit table frame32105 Rimini 700x420 mm incl. cockpit table frame

30161 Party, 500x400 mm

30640 Chalked teak, 930x580 mm

30602 Nice 850x540 mm30606 Nice 700x420 mm32205 Nice 850x540 mm incl. cockpit table frame32605 Nice 700x420 mm incl. cockpit table frame

Teak

Laminate

31

30806 Leg

30805 Arm

30803 Plastic sleeve, 2-pack

30802 Lever

30800 Wedge

10631 Cover L, 900x600 mm10632 Cover M, 850x540 mm10633 Cover S, 700x420 mm

30807 End plug

30808 Axel tapp

30804 Mounting plate under table30507 MPT cross fitting For rail mount

NOA Aluminium ABVintervägen 3, 135 40 Tyresö, Sweden

Tfn +46 8 742 63 00 | Fax +46 8 742 30 70

E-mail [email protected] | www.noa.se

StockholmBenn’s Mast & Båttillbehör, Prästkragens väg 20, 132 45 Saltsjö-Boo, 08-556 147 00, www.benns.seBåtaccenten, Svarvarvägen 8B, 142 50 Länna, 08-777 52 00, www.bataccenten.seErlnadsons Brygga, Karlsrogatan 1, 170 65 Solna, 08-444 97 50, www.bryggan.nuErlandsons Brygga, Planiavägen 7, 131 34 Nacka, 08-444 97 50, www.bryggan.nuErlandsons Brygga, Månskärsvägen 10C, 171 45 Kungens Kurva, 08-444 97 50, www.bryggan.nuHjertmans Bromma, Voltavägen 15, 168 69 Bromma, 08-26 35 40, www.hjertmans.seMarinshopen RM AB, Grossistvägen 1-5, 125 30 Älvsjö, 08-642 93 00, www.marinshopen.seSea Sea, Lövbacksvägen 4, 141 0 Huddinge, 08-505 640 40, www.seasea.seSea Sea, Prästkragensväg 15, 132 45 Saltsö-Boo, 08-556 618 40, www.seasea.seSea Sea, Erstagatan 22, 116 36 Stockholm, 08-644 00 00, www.seasea.se

GöteborgHjertmans, Datavägen 2, 436 32 Askim, 031-748 25 30, www.hjertmans.seSea Sea, Björlanda Kile Småbåtshamn, 423 61 Torslanda, 031-92 77 70, www.seasea.seSea Sea, Redegatan 1, 426 Västra Frölunda, 031-769 04 00, www.seasea.seViking Yachting, Hälleflundregatan 16, 421 58 Västra Frölunda, 031-69 61 60, www.vikingyachting.se

HelsingborgHjertmans, Västindiegatan 24, 252 71 Råå, 042-26 11 12, www.hjertmans.se

KarlstadHjertmans, Lantvärnsgatan 6, 652 21 Karlstad, 054-15 94 50, www.hjertmans.se

SundsvallHjertmans, Marinvägen 1, 856 33 Sundsvall, 060-64 17 00, www.hjertmans.se

VästeråsHjertmans, Sigurdsgatan 31, 721 30 Västerås, 021-41 99 90, www.hjertmans.se

NorwaySea Sea, Rudsletta 12, 1351 Rud, +47 67 17 52 52, www.seasea.noFlak A/S, Skibåsen 37, 4636 Kristiansand, www.flak.noWatski A/S, Vestre Haugen 21, 1054 Oslo, +47 22 82 00 60, www.watski.no

DenmarkPalby Marine, Korsvej 3, 6000 Kolding, +45 75 88 13 11, www.watski.dkWatski A/S, 2970 Hörsholm, +45 457 640 11, www.watski.dk

FinlandOY Vestek AB, Martinkuja 4, 0220 Espoo, +358 9 887 01 20, www.vestek.fiOY Maritim AB, PO Box 46, 00210 Helsinki, +358 20 651 80, www.maritim.fi

GermanyHerman Gotthardt GMBH, Leunastrasse 50, 22761 Hamburg, +49 40 851 505 60, www.watski.deRobert Lindemann KG, Wendenstrasse 455, 20537 Hamburg, +49 402 111 97 19, www.lindemann-kg.de

The NederlandsTechnautic BV, Industrieweg 35, 1521 NE Wormerveer, +31 75 647 45 45, www.technautic.nlBelship, Krommewetering 61a, 3543 Utrecht, +31 30 240 80 40, www.belship.nl

FranceUship, Zone du Kenyah-Plougoumelen, 56400 Auray, www.uship.fr

Canari IslandsWaterline Yachtservices, 35570 Playa Blanca Lanzarote, +34 928 349 245, www.waterlineyachtservice.comRolnautic, C/Joaquain Blanco Torrent, 35006 Las Palmas de Gran Canaria, +34 928 29 68 11

United KingdomMeridian Zero/Curtis Marine Int, Essex SS15 6SD, +44 1268 493 200, www.meridianzero.co.uk

GreeceNautilus LTD, 25 N. Plastira, Kalamaria, Thessaloniki 55132, +30 2310 452919, www.nautilus.grMetronix, Yposmenagou Katopodi, Lefkas 31 100, +3026 4529 488

CaribbeanIsland Water World, PO Box 234, St. Maarten, Netherlands Antilles, +599 544 5310, www.islandwaterworld.com

New Zealand/AustraliaLenker Marketing Ltd, PO Box 87, Greenhithe, Auckland, www.lenker.co.nz

NOA Product catalogue 2011

Documents

Transcript of NOA Product catalogue 2011