No Description RAPK PT. Control System Remarks PT...

No Description RAPK PT. Control System Remarks PT. Mercatura Indonesia Remarks PT. Trimegah Putera Makmur Remarks

1 Price Rp 3.500.000.000,00 Rp 2.579.620.500,00 Rp 2.799.149.000,00 Rp 2.358.576.000,00

Control Valve Rp 849.285.750,00 Fisher (COO China/

Malaysia, Global Sourcing) -

2nd Week of May 2017

Rp 1.566.280.000,00 Koso (JPN) - End June 2017 Rp 869.517.000,00 KOSO (China) - Mid - End

June 2017 - Mid July 2017

On Off Valve Rp 1.264.530.750,00 Virgo (Non India/ China,

Limit Switch : USA) - 3rd

Week of April 2017

Rp 614.650.000,00 Walworth (MXC) - End of May 2017 Rp 1.175.088.000,00 KOSO (China) - Mid - End

June 2017 - Mid July 2017

PSV Rp 410.300.250,00 Armaturen (GER/USA)- 3rd

Week of April 2017

Rp 554.537.000,00 Leser (GER) - 3rd Week of April 217 Rp 227.611.000,00 BOPP & Reuther (Germany) -

End Of May 2017

Solenoid Valve Rp 55.503.750,00 ASCO Rp 63.682.000,00 Norgren (GER) - 3rd Week of March

217

Rp 86.360.000,00 Norgren - (Mid March 2017)

3 Mandatory

Spare Parts

Yes Yes Yes yes yes

4 Brand As stated in AVL Valve : Virgo Valve : Koso (CO Japan) Valve : Koso (Japan)

Actuator : Bettis On-Off Valve : Walworth (CO Mexico) On-Off Valve : Koso (Japan)

Limit Switch : Topwork Solenoid Valve : Leser (CO Germany) Safety Valve : BOPP & Reuther

Regulator : Fisher Pressure Safety Valve : Leser (CO

Germany)

Solenoid Valve : Norgren

5 TOP TT 90 hari atau SKBDN Ussance 90

hari

SKBDN (90 days) SKBDN (90 days)

15% Engineering Approval

70% After FAT

10% After Material On Site

5% Retention 12 Months,

counter warranty bond

(bank)

5% DP

20% Fabrication Progress

70% Material On Site

5% Retention

5% After Engineering

Approval

10% After Fabrication Factory

10% After FAT

70% After Receiving The Goods

at DDP Gresik

5% After Retency 3 month

6 Warranty 24 month after commissioning 12 months from the date of initial

operation or 18 months from the date of

shipment

12 months from the date of

the initial operation or 18

months from the date of

shipment by Seller

8 Delivery terms DDP Gresik DDP Gresik DDP Gresik DDP Gresik DDP Gresik

9 Scope of Work Fabrication, Supply, Installation

Supervision, Commissioning

Type Test Certificate

Fabrication, Supply, Installation



Fabrication, Supply,

Installation Supervision,

Commissioning


Fabrication, Supply, Installation



Fabrication, Supply,

Installation Supervision,

Commissioning


COMMERCIAL BID EVALUATION OF PSV & CV

Confidential 13/01/2017 Page 1

PT. Control Systems Arena Para Nusa

Beltway Office Park

Jl. Ampera Raya Kav. 9-10

Jakarta 12550, Indonesia

http://www.ptcs.co.id

Tel. : +62 21 780 7881

Fax. : +62 21 780 7879

E-mail : [email protected]

Jakarta,

To : PT. PEMBANGUNAN PERUMAHAN TBK(PP)UNIT PEMBANGKITAN MUARA TAWAR DESA SEGERA JAYA - BEKASIBEKASI, 71218

Attn : Ibu Dinni

Subject : GRESIK GAS COGENERATION PLANT PROJECT

Your Ref. : EMAILOur Ref. : QO350-A160116

Dear Sir/Madam,

I. PRICETOTAL PRICE DDP GRESIK excld VAT 10% 2.579.620.500,00Rp

II. COMMERCIAL CONDITIONS

1. Quotation Validity

2. Delivery time

: 20 weeks after received the payment




3. Term of Payment

SKBDN ussance 90 days

· 5% Datasheet Engineering Approval

· 30% PO Raw Material, setelah invoice diterima lengkap dan benar

· 30% Before FAT, setelah invoice diterima lengkap dan benar

· 30% Material On Site ,setelah invoice diterima lengkap dan benar

· 5% Retensi, setelah invoice diterima lengkap dan benar (counter warranty bond)

PT. Bank Mandiri (Persero) Tbk.

Jakarta Kawasan Komersial Cilandak

Gedung III, Jl. Raya Cilandak KKOJakarta 12560

Swift Code : BMRIIDJA

Atas Nama : PT.CONTROL SYSTEMS

Acc No. : 127-000-500-6505 (USD)

Acc No. : 127-000-500-6323 (IDR)

4. Delivery Terms

Delivery duty paid GRESIK

The schedule will be started from the receipt of your official purchase order together with clear technical information for us

immediately to start the order processing.

Proposed lead-time is exclusive of annual shutdown periods i.e. 3 weeks for August and 2 for Christmas

Control Valve Package

On-Off Valve Package

Pressure Safety Valve

Solenoid Valve Package

13 January 2017

In compliance to your inquiry with above subject, we are pleased to submit our quotation with the best price and delivery as attached price

summary and descriptions in details:

This quotation is valid until:

12 Februari 2017

being 30 days from the closing date as shown on your tender/enquiry. At the expiration of this validity period, we do reserve the

right to review & revise prices and necessary.

http://www.ptcs.co.id/


Beltway Office Park




Tel. : +62 21 780 7881

Fax. : +62 21 780 7879


5. Cancellation Charges

- After Order Entry 10% Net selling price

- After Purchase Order is placed with factory 20% Net Selling Price

- After Acknowledge for parts/sub-assemblies from factory 40% Net Selling Price

- Upon shipment/receipt of parts sub-assemblies from factory 50% Net Selling Price

- Upon release to assembly 70% Net Selling Price

- Upon completion of assembly/packing 100% Net Selling Price

6. Warranty

7. Person in charge of PTCS (+62 21 780 7881)

Macarius Vicano - Product Sales Engineer

Yunita Ayu | I Nyoman Sonny B. - Product Application Engineer

Yours Faithfully,PT. Control Systems Arena Para Nusa

Djoni PenPresident Director

Seller warrants title and that the goods will be free from defects in materials or workmanship under normal use and service until

the expiration of the earlier of twelve (12) months from the date of initial installation or eighteen (18) months from the date of

shipment by Seller, whichever period expires first.

Our offer generally complies with your requirement unless otherwise specified in comments and deviation notes. We thank you for this

opportunity to quote and trust that our offer will meet your requirement.



Beltway Office Park




Tel. : +62 21 780 7881

Fax. : +62 21 780 7879


Jakarta,

To : Ibu Dinni

PT. PEMBANGUNAN PERUMAHAN TBK(PP)

Item Price Summary

Control Valve Package

No TAG # Price/Unit IDR Qty Price IDR

1 26-PV-958 299.235.750,00Rp 1 299.235.750,00Rp

2 26-PV-951 361.380.000,00Rp 1 361.380.000,00Rp

3 26-PV-953 160.170.000,00Rp 1 160.170.000,00Rp

28.500.000,00Rp 1 28.500.000,00Rp

849.285.750,00Rp

On-Off Valve Package

BRAND TYPE SIZE (Inch) Class Brand Model Mfctr Model Mfctr Model

1 07-XV-426 Virgo TMBV 6 150 Bettis G01010-SR3-CW Topwork DXP-L21GNEB Fisher 67DFR 273.756.750,00Rp 1 273.756.750,00Rp




28.500.000,00Rp 1 28.500.000,00Rp

1.264.530.750,00Rp

Pressure Safety Valve Package

No TAG # Brand Figure Size Body Material Connection Set Pressure Price/Unit IDR Qty Price IDR

1

04-PSV-301

04-PSV-302

04-PSV-303A

04-PSV-303B

ARI Reyco 968 3/4" x 1"Carbon Steel

SA216WCC

RF Flange

Ansi 150 x

150

5 Kg/cm2g 35.468.250,00Rp 4 141.873.000,00Rp

2 26-PSV-952 ARI Reyco 974 4" x 6"Stainless Steel

CF8M

RF Flange

Ansi 600 x

150

54 Kg/cm2g Rp 239.927.250,00 1 Rp 239.927.250,00

28.500.000,00Rp 1 28.500.000,00Rp

410.300.250,00Rp

Solenoid Valve Package

No TAG # Brand Price/Unit IDR Qty Price IDR

1 07-XV-464 ASCO 6.683.250,00Rp 1 6.683.250,00Rp

207-XV-462

07-XV-463ASCO 10.160.250,00Rp 2 20.320.500,00Rp

28.500.000,00Rp 1 28.500.000,00Rp

55.503.750,00Rp

Complete with :

Certificate of Conformity / Origin

Country of Origin:

Virgo Valve : India

Bettis Actuator : China

Topworx Limit Switch : USA

Fisher Regulator : China

Fisher Valve : Malaysia

Material : Global Sourcing

ARI Reyco PSV : Jerman

Note :

Include shutdown valve assembly and FAT at Jakarta

Include control valve FAT at Malaysia, exclude transportation and accomodation

Include PSV FAT at Jerman, exclude transportation and accomodation

Exclude installation and start up

Neither PTCS, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance of any product.

Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user.

Conventional, Full

Nozzle

13 Januari 2017

NO TAG #VALVE

Quotation Detail

REGULATORPrice/Unit IDR Qty Price IDR

ACTUATOR

Description

NPS 6 EWT Origin Cert PL 657 Size 50i DVC6200 Special Tagging Factory Mtgs DVC6200/DVC2000 167DA Series Acc Process Level 3

NPS 6 ED Origin Cert PL 657 Size 60i DVC6200 Special Tagging Factory Mtgs DVC6200/DVC2000 Process Level 3

NPS 2 ES Origin Cert PL 657 Size 45i DVC6200 Special Tagging Factory Mtgs DVC6200/DVC2000 Process Level 3

TOTAL PRICE DDP GRESIK excld VAT 10%

Model Description

8210G014 110/50,VALVE

8210G032 110/50, VALVE


Supervision and SAT (3 days) include transportation and accomodation






Conventional, Full

Nozzle

Type

RL 40 Gastight Cap

Screwed

Design

LIMIT SWITCH

Control Systems


Project: PEKERJAAN OUTSIDE BATTERY LIMIT (OSBL) GRESIK GAS COGENERATION PLANTDescription: Control Valves

C-CommentsD-Deviation

General Comments:

1. We assume the fluid is clean

2.Tag. Name plate material for stainless steel is 18‐8 SST.

3.Please note Trim material selection will be as per FISHER Standard . We ensure the offered trim material will be suitable for the given process condition and application.

4. We used 80 psig air supply pressure for piston actuator and 0-33 psig for spring diapragm actuator

Item No Tag No Category* Brief ClarificationStatus

(Open/Close)

All Tag All Tag D Body MaterialData sheet requested SA 105 for body material, but w e have offered A216 grade WCC. A216 grade WCC is casting type of carbon steel. Forging is not available for our control valve. Our control valves are from castings. Forged bodies w as not part of the design specif ications of our control valve. So We offered carbon casting grade WCC. This material also has same properties w ith A105. kindly confirm..

All Tag All Tag C Cv Calculate & Noise issue

As discussed w ith customer, w e have offer control valve w ith standar trim to accommodate Cv calculate. Customer already confirm and accepted the noise calculate >100 dBA.

ITEM WISE COMMENTS & DEVIATION

*Legend

5.Painting is considered as per FISHER standard. Standard powder painting has been offered for Valve body. Stainless steel body material- No painting.

6 Positioner Offered is DVC6200 including 4-20 mA position transmitter, Hart diagnostic tier, FM Approval complete with 67CFR Air set Regulator. This positioner without bypass

7.Tubbing and Fitting material 3/8 inch SST/SST Swagelok

Control Valves Specification SheetCustomer: PT.Control Systems (PTCS)Contact: Contact: Nyoman BudirtaCustomer Reference: Sales Office Reference: Lead Time: Item: 1 Rev: Qty: 1Tags: 26-PV-958 Date Last Modified: 28/12/2016Service Description: Product Steam to Daerator Package Boiler

1 Fluid: Crit. Pres. PC: SERVICE CONDITIONS Units: Maximum Normal Minimum

2 Mass Flow Rate Gas (w) kg/h 9970.0000 8920.0000 5000.00003 Inlet Pressure (P1) kg/cm2g 6.00000 4.00000 3.000004 Outlet Pressure (P2) kg/cm2g 4.00000 0.20000 0.200005 Inlet Temperature (T1) deg C 250.0000 244.0000 200.00006 M / Gg M 18.020 18.020 18.0207 Specific heats ratio (gamma) 1.390 1.390 1.3908 Dynamic Viscosity (Mu) cP 0.001 0.001 0.0019 Sizing Coefficient (Cv) 175.265 183.606 123.66110 % Open 63 65 4511 (Allowed / Calculated) dB(A) /92 /101 /9512| PIPE LINE | 53 ACTUATOR Type: Spring & Diaphragm

13 Size, Schedule In: 10 in, SCH STD 54 Mfg/Model: Fisher/65714 Size, Schedule Out: 10 in, SCH STD 55 Size: 50i Eff Area: 105 in215 Insulation: | 56 On/Off: | Modulating: | 16 VALVE BODY/BONNET Type: Globe 57 Spring Action: Up,Open17 Size: NPS 6 ANSI CL150 58 Max Allow Press: 50 psig18 Max Press/Temp: 6 kg/cm2g/300 deg C 59 Min Req'd Press: | 19 Mfg/Model: Fisher/EWT 60 Available Air Supply Pressure20 Body/Bonnet Matl: WCC Steel 61 Max: | Min: | 21 Liner Matl/ID: | 62 Bench Range: 6-15 psi22 End Connection In: 6 CL150 RF Flg 63 Act Orientation: | 23 End Connection Out: 6 CL150 RF Flg 64 Handwheel Type: None24 Flg Face Finish: | 65 Air Failure Valve: Open Set at: | 25 End Ext/Matl: | 66 | 26 Flow Direction: Down 67 Input Signal: 4 to 20 mA dc27 BONNET Type: Plain 68 POSITIONER Type: I/P28 Lub-Iso Valve: No Lube: No 69 Mfg/Model: Fisher/DVC6200/HART Communicating-HC29 Packing Material: Single Graphite 70 Incr Signal Output: | 30 Packing Type: | 71 Gauges: 0-60 psig/0-4 bar By-Pass: | 31 72 Cam Characteristic: | 32 TRIM Type: Metal-Radius Seat 1 73 | 33 Size: 4 3/8 Inch Travel: 2 Inch SWITCHES34 Characteristic: Linear 74 Type: | Qty: | 35 Balanced/Unbalanced: Balanced 75 Mfg/Model: | 36 Rated Cv: 320.0 Fl: 0.86 Xt: 0.725 76 Contacts/Rating: | 37 Material: S41600 SST 77 Actuation Points: | 38 Seat Material: S41600 SST 78 | 39 Cage Material: CB7Cu-1 SST AIRSET40 Stem Material: S31600 SST 79 Mfg/Model: Fisher/67CFR Filter/Regulator41 | 80 Set Pressure: | 42 | 81 Filter: | Gauges: |

SPECIAL ACCESS. 82 | 43 NEC Class: | Group: | Div: | 83 TESTS Hydro Press: | 44 | 84 ANSI/FCI Leak Class: ANSI CL IV45 | 85 | 46 | 86 | 47 | Rev Date Revision Orig App48 | | | | | | 49 | | | | | | 50 | | | | | | 51 | | | | | | 52 | | | | | |

Valve/Regulator Sizing Calculation v.2.0.0.0

Customer: PT.Control Systems (PTCS)Contact: Contact: Nyoman BudirtaCustomer Reference: Sales Office Reference: Lead Time: Item: 1 Rev: Qty: 1 Rev: CTags: 26-PV-958 Date Last Modified: 28/12/2016Description: NPS 6 EWT Origin Cert PL 657 Size 50i DVC6200 Special Tagging Factory Mtgs DVC6200/DVC2000 167DA Series Acc Process Level 3Service Description: Product Steam to Daerator Package Boiler

Sizing Type: Gas Flow is Turbulent Solving for: Cv Noise is IECAerodynamic Flow is MassVariable Name Units Minimum Normal MaximumSERVICE & SIZINGGasInlet Pressure (P1) kg/cm2g 3.00000 4.00000 6.00000Outlet Pressure (P2) kg/cm2g 0.20000 0.20000 4.00000Inlet Temperature (T1) deg C 200.0000 244.0000 250.0000Mass Flow Rate Gas (w) kg/h 5000.0000 8920.0000 9970.0000Pressure drop ratio factor (Xt) 0.651 0.666 0.664Pressure Recovery Factor (Fl) 0.860 0.860 0.860Valve style modifier (Fd) 0.277 0.290 0.310Atmospheric Pressure psi 14.69 14.69 14.69Dynamic Viscosity (Mu) cP 0.001 0.001 0.001Specific heats ratio (gamma) 1.390 1.390 1.390Molecular Weight/Specific Gravity M 18.020 18.020 18.020Inlet Compressibility Factor (Z1) 0.930 0.930 0.930 Pipe Size Up in 10 10 10Pipe Schedule Up STD STD STDPipe Size Down in 10 10 10Pipe Schedule Down STD STD STDNominal Valve Diameter (dv) in 6.000 6.000 6.000Aerodynamic Distance (Rn) in 39.37 39.37 39.37 Sizing Coefficient (Cv) 123.661 183.606 175.265dP Choked psi 37.077 47.340 65.902dP/P1 Valve 0.694 0.755 0.284Fp 1.00 0.99 0.99 NOISE CALCULATIONValve/Trim Globe/Angle Globe/Angle Globe/AngleLpAeValve1m dB(A) 95 101 92LpAValveRn dB(A) 95 101 92 VELOCITY OUTPUTSValve Outlet Area(Ao) in2 28.000 28.000 28.000M1 Pipe Mach 0.025 0.038 0.031Mo Valve Mach 0.252 0.470 0.129M2 Pipe Mach 0.089 0.167 0.046V1 Pipe ft/s 45.972 71.830 58.120Vo Valve ft/s 455.398 887.981 245.940V2 Pipe ft/s 161.705 315.309 87.330C1 Pipe ft/s 1807.831 1890.021 1900.954Co Valve ft/s 1807.831 1890.021 1900.954C2 Pipe ft/s 1807.831 1890.021 1900.954Item Notes:

Actuator Sizing CalculationCustomer: PT.Control Systems (PTCS)Contact: Contact: Nyoman BudirtaCustomer Reference: Sales Office Reference: Lead Time: Item: 1 Rev: Qty: 1 Quote: 171-NB-161215-0023747 /

CS7A003001.IN.16.005175Rev: C

Tags: 26-PV-958 Date Last Modified: 28/12/2016Description: NPS 6 EWT Origin Cert PL 657 Size 50i DVC6200 Special Tagging Factory Mtgs DVC6200/DVC2000 167DA Series Acc Process Level 3Service Description: Product Steam to Daerator Package BoilerVariable Name Values UnitsPas Available 49.69 psia Valve Body Size 6.0 in Port Diameter 4.38 in Unbalanced Area 0.15 in2 Valve Travel 2.00 in Valve Stem Size .75 in Valve Friction 350.00 lbf Additional Friction 0.00 lbf Seat load force 40.00 lbf/in P1 Max 100.03 psia P2 Min 14.69 psia Unbalance Force @ Open 0.00 lbf Fluid Negative Gradient 0.00 in dP Flowing 0.00 psi With Side MO No Works Yes Actuator Size 50i Spring 1F1773 Product Lower Bench Set 20.69 psia Product Upper Bench Set 29.69 psia Spring Rate 472.00 lbf/in Spring Windup 1.34 in Max Spring Load 1575.02 lbf PS Required 40.38 psia Actuator thrust down 1122.92 lbf Actuator thrust up 631.02 lbf Valve thrust down 912.92 lbf Valve thrust up 350.00 lbf Lower Bench Set 20.70 psia Upper Bench Set 29.69 psia Lower Stroking 20.70 psia Upper Stroking 29.82 psia Lower Friction Band(+/-) 18.02 psia Upper Friction Band(+/-) 18.02 psia Lower Operating 16.92 psia Upper Operating 38.38 psia Req. Handwheel thrust 2487.94 lbf Supply Pressure Used 49.69 psia

Flow Coefficient GraphCustomer: PT.Control Systems (PTCS)Contact: Contact: Nyoman BudirtaCustomer Reference: Sales Office Reference: Lead Time: Item: 1 Rev: Qty: 1

Tags: 26-PV-958 Date Last Modified: 28/12/2016Description: NPS 6 EWT Origin Cert PL 657 Size 50i DVC6200 Special Tagging Factory Mtgs DVC6200/DVC2000 167DA Series Acc Process Level 3Service Description: Product Steam to Daerator Package Boiler

Product: EWT Valve Size=NPS 6 Trim Style/Characteristic=Linear Trim Level=None Port Diameter=4 3/8 Inch Travel=2 Inch ANSI Class=CL600 & Less

Control Valves Specification Sheet Customer: PT.Control Systems (PTCS)Contact: Contact: Nyoman BudirtaCustomer Reference: Sales Office Reference: Lead Time: Item: 2 Rev: Qty: 1Tags: 26-PV-951 Date Last Modified: 28/12/2016Service Description: MP Steam Vent



13 Size, Schedule In: 6 in, SCH STD 54 Mfg/Model: Fisher/65714 Size, Schedule Out: 6 in, SCH STD 55 Size: 60i Eff Area: 156 in215 Insulation: | 56 On/Off: | Modulating: | 16 VALVE BODY/BONNET Type: Globe 57 Spring Action: Up,Open17 Size: NPS 6 ANSI CL600 58 Max Allow Press: 40 psig18 Max Press/Temp: 51 kg/cm2g/427 deg C 59 Min Req'd Press: | 19 Mfg/Model: Fisher/ED 60 Available Air Supply Pressure20 Body/Bonnet Matl: WCC Steel 61 Max: | Min: | 21 Liner Matl/ID: | 62 Bench Range: 5.5-11.5 psi22 End Connection In: CL600 RF Flg 63 Act Orientation: | 23 End Connection Out: CL600 RF Flg 64 Handwheel Type: None24 Flg Face Finish: | 65 Air Failure Valve: Open Set at: | 25 End Ext/Matl: | 66 | 26 Flow Direction: Down 67 Input Signal: 4 to 20 mA dc27 BONNET Type: Plain 68 POSITIONER Type: I/P28 Lub-Iso Valve: No Lube: No 69 Mfg/Model: Fisher/DVC6200/HART Communicating-HC29 Packing Material: Single Graphite 70 Incr Signal Output: | 30 Packing Type: | 71 Gauges: 0-60 psig/0-4 bar By-Pass: | 31 72 Cam Characteristic: | 32 TRIM Type: Metal 1 73 | 33 Size: 7 Inch Travel: 2 Inch SWITCHES34 Characteristic: Linear 74 Type: | Qty: | 35 Balanced/Unbalanced: Balanced 75 Mfg/Model: | 36 Rated Cv: 433.0 Fl: 0.84 Xt: 0.803 76 Contacts/Rating: | 37 Material: S41600 SST 77 Actuation Points: | 38 Seat Material: S41000 SST 78 | 39 Cage Material: CB7Cu-1 SST AIRSET40 Stem Material: S31600 SST 79 Mfg/Model: Fisher/67CFR Filter/Regulator41 | 80 Set Pressure: | 42 | 81 Filter: | Gauges: |



Customer: PT.Control Systems (PTCS)Contact: Contact: Nyoman BudirtaCustomer Reference: Sales Office Reference: Lead Time: Item: 2 Rev: Qty: 1 Rev: CTags: 26-PV-951 Date Last Modified: 28/12/2016Description: NPS 6 ED Origin Cert PL 657 Size 60i DVC6200 Special Tagging Factory Mtgs DVC6200/DVC2000 Process Level 3Service Description: MP Steam Vent

Sizing Type: Gas Flow is Turbulent Solving for: Cv Noise is IECAerodynamic Flow is MassVariable Name Units Minimum Normal MaximumSERVICE & SIZINGGasInlet Pressure (P1) kg/cm2g 41.00000 51.00000 51.00000Outlet Pressure (P2) kg/cm2g 1.00000 3.00000 5.00000Inlet Temperature (T1) deg C 340.0000 425.0000 510.0000Mass Flow Rate Gas (w) kg/h 50000.0000 128500.0000 160000.0000Pressure drop ratio factor (Xt) 0.732 0.799 0.790Pressure Recovery Factor (Fl) 0.840 0.840 0.840Valve style modifier (Fd) 0.269 0.310 0.310Atmospheric Pressure psi 14.69 14.69 14.69Dynamic Viscosity (Mu) cP 0.001 0.001 0.001Specific heats ratio (gamma) 1.390 1.390 1.390Molecular Weight/Specific Gravity M 18.020 18.020 18.020Inlet Compressibility Factor (Z1) 0.930 0.930 0.930 Pipe Size Up in 6 6 6Pipe Schedule Up STD STD STDPipe Size Down in 6 6 6Pipe Schedule Down STD STD STDNominal Valve Diameter (dv) in 6.000 6.000 6.000Aerodynamic Distance (Rn) m 1.000 1.000 1.000 Sizing Coefficient (Cv) 126.840 269.039 356.746dP Choked psi 434.617 586.880 580.487dP/P1 Valve 0.952 0.922 0.884Fp 1.00 1.00 1.00 NOISE CALCULATIONValve/Trim Globe/Angle Globe/Angle Globe/AngleLpAeValve1m dB(A) 125 131 133LpAValveRn dB(A) 125 131 133 VELOCITY OUTPUTSValve Outlet Area(Ao) in2 28.000 28.000 28.000M1 Pipe Mach 0.076 0.168 0.221Mo Valve Mach 1.000 1.000 1.000M2 Pipe Mach 1.000 1.000 1.000V1 Pipe ft/s 156.011 368.793 515.105Vo Valve ft/s 2057.983 2196.002 2325.846V2 Pipe ft/s 2057.983 2196.002 2325.846C1 Pipe ft/s 2057.983 2196.002 2325.846Co Valve ft/s 2057.983 2196.002 2325.846C2 Pipe ft/s 2057.983 2196.002 2325.846WARNINGS


Customer: PT.Control Systems (PTCS)Contact: Contact: Nyoman BudirtaCustomer Reference: Sales Office Reference: Lead Time: Item: 2 Rev: Qty: 1 Rev: CTags: 26-PV-951 Date Last Modified: 28/12/2016Description: NPS 6 ED Origin Cert PL 657 Size 60i DVC6200 Special Tagging Factory Mtgs DVC6200/DVC2000 Process Level 3Service Description: MP Steam Vent

Sizing Type: Gas Flow is Turbulent Solving for: Cv Noise is IECAerodynamic Flow is MassVariable Name Units Minimum Normal Maximum

The Sound Pressure Level, LpA, of this condition exceeds the suggested limit of 110 dBA (normalized at 1 meter with STD pipe schedule). Additional source noise attenuation is required; path treatment is not appropriate. Note: Your noise prediction may be less than 110 dBA because you input a distance greater than 1 meter, or the pipe schedule input is greater than STD.



Item Notes:


CS7A003001.IN.16.005175Rev: C

Tags: 26-PV-951 Date Last Modified: 28/12/2016Description: NPS 6 ED Origin Cert PL 657 Size 60i DVC6200 Special Tagging Factory Mtgs DVC6200/DVC2000 Process Level 3Service Description: MP Steam VentVariable Name Values UnitsPas Available 49.69 psia Valve Body Size 6.0 in Port Diameter 7.00 in Unbalanced Area 0.81 in2 Valve Travel 2.00 in Valve Stem Size .75 in Valve Friction 660.00 lbf Additional Friction 0.00 lbf Seat load force 80.00 lbf/in P1 Max 740.08 psia P2 Min 14.69 psia Unbalance Force @ Open 0.00 lbf Fluid Negative Gradient 0.00 in dP Flowing 0.00 psi With Side MO No Works Yes Actuator Size 60i Spring 1F1773 Product Lower Bench Set 20.19 psia Product Upper Bench Set 26.19 psia Spring Rate 472.00 lbf/in Spring Windup 1.80 in Max Spring Load 1793.98 lbf PS Required 47.46 psia Actuator thrust down 3318.86 lbf Actuator thrust up 849.98 lbf Valve thrust down 3006.86 lbf Valve thrust up 660.00 lbf Lower Bench Set 20.14 psia Upper Bench Set 26.19 psia Lower Stroking 20.14 psia Upper Stroking 29.96 psia Lower Friction Band(+/-) 18.92 psia Upper Friction Band(+/-) 18.92 psia Lower Operating 15.61 psia Upper Operating 45.46 psia Req. Handwheel thrust 4800.84 lbf Supply Pressure Used 49.69 psia


Tags: 26-PV-951 Date Last Modified: 28/12/2016Description: NPS 6 ED Origin Cert PL 657 Size 60i DVC6200 Special Tagging Factory Mtgs DVC6200/DVC2000 Process Level 3Service Description: MP Steam Vent

Product: ED Valve Size=NPS 6 Port Diameter=7 Inch Trim Style/Characteristic=Linear Trim Level=None Travel=2 Inch

Control Valves Specification Sheet Customer: PT.Control Systems (PTCS)Contact: Contact: Nyoman BudirtaCustomer Reference: Sales Office Reference: Lead Time: Item: 3 Rev: Qty: 1Tags: 26-PV-953 Date Last Modified: 28/12/2016Service Description: Letdown Steam from MP to LP System



13 Size, Schedule In: 4 in, SCH STD 54 Mfg/Model: Fisher/65714 Size, Schedule Out: 4 in, SCH STD 55 Size: 45i Eff Area: 105 in215 Insulation: | 56 On/Off: | Modulating: | 16 VALVE BODY/BONNET Type: Globe 57 Spring Action: Up,Open17 Size: NPS 2 ANSI CL600 58 Max Allow Press: 50 psig18 Max Press/Temp: 54 kg/cm2g/425 deg C 59 Min Req'd Press: | 19 Mfg/Model: Fisher/ES 60 Available Air Supply Pressure20 Body/Bonnet Matl: WCC Steel 61 Max: | Min: | 21 Liner Matl/ID: | 62 Bench Range: 4-13 psi22 End Connection In: CL600 RF Flg 63 Act Orientation: | 23 End Connection Out: CL600 RF Flg 64 Handwheel Type: None24 Flg Face Finish: | 65 Air Failure Valve: Open Set at: | 25 End Ext/Matl: | 66 | 26 Flow Direction: Up 67 Input Signal: 4 to 20 mA dc27 BONNET Type: Plain 68 POSITIONER Type: I/P28 Lub-Iso Valve: No Lube: No 69 Mfg/Model: Fisher/DVC6200/HART Communicating-HC29 Packing Material: Single Graphite 70 Incr Signal Output: | 30 Packing Type: | 71 Gauges: 0-60 psig/0-4 bar By-Pass: | 31 72 Cam Characteristic: | 32 TRIM Type: Metal 1 73 | 33 Size: 1 5/16 Inch Travel: 3/4 Inch SWITCHES34 Characteristic: Linear 74 Type: | Qty: | 35 Balanced/Unbalanced: Unbalanced 75 Mfg/Model: | 36 Rated Cv: 30.9 Fl: 0.91 Xt: 0.746 76 Contacts/Rating: | 37 Material: S41600 SST 77 Actuation Points: | 38 Seat Material: S41600 SST 78 | 39 Cage Material: CB7Cu-1 SST AIRSET40 Stem Material: S31600 SST 79 Mfg/Model: Fisher/67CFR Filter/Regulator41 | 80 Set Pressure: | 42 | 81 Filter: | Gauges: |



Customer: PT.Control Systems (PTCS)Contact: Contact: Nyoman BudirtaCustomer Reference: Sales Office Reference: Lead Time: Item: 3 Rev: Qty: 1 Rev: CTags: 26-PV-953 Date Last Modified: 28/12/2016Description: NPS 2 ES Origin Cert PL 657 Size 45i DVC6200 Special Tagging Factory Mtgs DVC6200/DVC2000 Process Level 3Service Description: Letdown Steam from MP to LP System

Sizing Type: Gas Flow is Turbulent Solving for: Cv Noise is IECAerodynamic Flow is MassVariable Name Units Minimum Normal MaximumSERVICE & SIZINGGasInlet Pressure (P1) kg/cm2g 41.00000 51.00000 54.00000Outlet Pressure (P2) kg/cm2g 4.00000 4.00000 5.00000Inlet Temperature (T1) deg C 340.0000 425.0000 510.0000Mass Flow Rate Gas (w) kg/h 3000.0000 8500.0000 10000.0000Pressure drop ratio factor (Xt) 0.741 0.675 0.692Pressure Recovery Factor (Fl) 0.910 0.910 0.910Valve style modifier (Fd) 0.446 0.400 0.388Atmospheric Pressure psi 14.69 14.69 14.69Dynamic Viscosity (Mu) cP 0.001 0.001 0.001Specific heats ratio (gamma) 1.390 1.390 1.390Molecular Weight/Specific Gravity M 18.020 18.020 18.020Inlet Compressibility Factor (Z1) 0.930 0.930 0.930 Pipe Size Up in 4 4 4Pipe Schedule Up STD STD STDPipe Size Down in 4 4 4Pipe Schedule Down STD STD STDNominal Valve Diameter (dv) in 2.000 2.000 2.000Aerodynamic Distance (Rn) in 39.37 39.37 39.37 Sizing Coefficient (Cv) 7.578 19.553 22.831dP Choked psi 439.801 497.290 539.746dP/P1 Valve 0.880 0.903 0.890Fp 1.00 0.99 0.98 NOISE CALCULATIONValve/Trim Globe/Angle Globe/Angle Globe/AngleLpAeValve1m dB(A) 100 110 111LpAValveRn dB(A) 100 110 111 VELOCITY OUTPUTSValve Outlet Area(Ao) in2 3.100 3.100 3.100M1 Pipe Mach 0.010 0.025 0.030Mo Valve Mach 0.381 1.000 1.000M2 Pipe Mach 0.093 0.280 0.291V1 Pipe ft/s 21.243 55.362 69.079Vo Valve ft/s 783.415 2196.002 2325.846V2 Pipe ft/s 190.773 615.455 677.586C1 Pipe ft/s 2057.983 2196.002 2325.846Co Valve ft/s 2057.983 2196.002 2325.846C2 Pipe ft/s 2057.983 2196.002 2325.846WARNINGS


Customer: PT.Control Systems (PTCS)Contact: Contact: Nyoman BudirtaCustomer Reference: Sales Office Reference: Lead Time: Item: 3 Rev: Qty: 1 Rev: CTags: 26-PV-953 Date Last Modified: 28/12/2016Description: NPS 2 ES Origin Cert PL 657 Size 45i DVC6200 Special Tagging Factory Mtgs DVC6200/DVC2000 Process Level 3Service Description: Letdown Steam from MP to LP System

Sizing Type: Gas Flow is Turbulent Solving for: Cv Noise is IECAerodynamic Flow is MassVariable Name Units Minimum Normal Maximum



Item Notes:


CS7A003001.IN.16.005175Rev: C

Tags: 26-PV-953 Date Last Modified: 28/12/2016Description: NPS 2 ES Origin Cert PL 657 Size 45i DVC6200 Special Tagging Factory Mtgs DVC6200/DVC2000 Process Level 3Service Description: Letdown Steam from MP to LP SystemVariable Name Values UnitsPas Available 49.69 psia Valve Body Size 2.0 in Port Diameter 1.31 in Unbalanced Area 1.35 in2 Valve Travel 0.75 in Valve Stem Size .5 in Valve Friction 320.00 lbf Additional Friction 0.00 lbf Seat load force 40.00 lbf/in P1 Max 782.75 psia P2 Min 14.69 psia Unbalance Force @ Open 0.00 lbf Fluid Negative Gradient 0.00 in dP Flowing 0.00 psi With Side MO No Works Yes Actuator Size 45i Spring 1E8265 Product Lower Bench Set 18.69 psia Product Upper Bench Set 27.69 psia Spring Rate 1260.00 lbf/in Spring Windup 0.33 in Max Spring Load 1364.96 lbf PS Required 44.18 psia Actuator thrust down 1731.82 lbf Actuator thrust up 419.96 lbf Valve thrust down 1521.82 lbf Valve thrust up 320.00 lbf Lower Bench Set 18.69 psia Upper Bench Set 27.69 psia Lower Stroking 18.69 psia Upper Stroking 37.56 psia Lower Friction Band(+/-) 17.74 psia Upper Friction Band(+/-) 17.74 psia Lower Operating 15.19 psia Upper Operating 42.18 psia Req. Handwheel thrust 2886.77 lbf Supply Pressure Used 49.69 psia


Tags: 26-PV-953 Date Last Modified: 28/12/2016Description: NPS 2 ES Origin Cert PL 657 Size 45i DVC6200 Special Tagging Factory Mtgs DVC6200/DVC2000 Process Level 3Service Description: Letdown Steam from MP to LP System

Product: ES Valve Size=NPS 2 Port Diameter=1 5/16 Inch Trim Style/Characteristic=Linear Trim Level=None Travel=3/4 Inch

Customer : PT. PEMBANGUNAN PERUMAHAN TBK(PP)Enquiry reference : EMAILOffer Reference : QO350-A160116Project : GRESIK GAS COGENERATION PLANT PROJECT

Product : Ball Valve

Valve Virgo

Bore Code Body Ball Stem Seat1 1 07-XV-426 Ball Valve TMBV 6" 150# FB RF 6"-N2-RF-1-F-C-6-L-F-G-SI WCB F316 F6A F316+Devlon B7M/2HM Graphite Viton AED -29 to +150 API 6D Gear Mfr Std 100% MPI on Body & Adaptor2 2 07-XV-427 Ball Valve TMBV 6" 150# FB RF 6"-N2-RF-1-F-C-6-L-F-G-SI WCB F316 F6A F316+Devlon B7M/2HM Graphite Viton AED -29 to +150 API 6D Gear Mfr Std 100% MPI on Body & Adaptor3 3 07-XV-461 Ball Valve TMBV 10" 150# FB RF 10"-N2-RF-1-F-C-6-L-F-G-SI WCB F316 F6A F316+Devlon B7M/2HM Graphite Viton AED -29 to +150 API 6D Gear Mfr Std 100% MPI on Body & Adaptor4 4 08-XV-476 Ball Valve TMBV 6" 150# FB RF 6"-N2-RF-1-F-C-6-L-F-G-SI WCB F316 F6A F316+Devlon B7M/2HM Graphite Viton AED -29 to +150 API 6D Gear Mfr Std 100% MPI on Body & Adaptor

Notes:Specification for Ball Valve

Offered Ball Valves are "Virgo make, Fire safe Ball Valves with Antistatic device and blow out proof Stem.

** Standards Applicable for Trunnion Mounted Ball Valve

1 Design & manufacturing Standard : API 6D2 End to End ( Face to Face ) : ANSI B 16.103 Flanged and Drilled to : ANSI B 16.50 4 Pressure Testing : API 6D/ API 5985 Fire Tested Design : API 6FA/API 6076 NACE as per : MR-01-75 (Year 2002)7 Quality System : ISO 9001 - 2000

** Notes:1) Offered ball valves are Virgo make 2/3 piece, fire safe with antistatic device, blow-out proof stem & self reliving seats.

2)3) Painting for the offered valves shall be as per Virgo Standards. Refer attached specifications. ONLY APPLICABLE FOR CARBON STEEL VALVES. SS VALVES WILL NOT BE PAINTED.4) Please note that we have offered seat & seal material as per manufacturer's standards. Customer has to confirm the suitability of offered seat & seal material with the line fluid.5) Quoted valves are designed & manufactured in line with API 6D / ISO 17292 specifications. Do not meet any project specifications.6) Valve material is as tabulated above. Please check compliance with temperature & service media at your end.7) Quoted valves are side entry design.8) Material Source restriction is not specified hence we have considered our standard vendor list.9) We have not considered Third Party Inspection for the offered valves. Please let us know the scope & Quantum of Inspection if the same is required. We shall revise our offer accordingly.

10) Please note that our offer is limited to materials, procedures and documentation described in the offer itself. No other considerations are included in our quotation.11) We reserve the right to update our bid should any specification, standards, norms not submitted for evaluation prove to have an impact on quoted value

Deviation list1 Offered MOC is as tabulated. Please confirm the acceptance. Placement of order without confirmation to our proposed quotation will be considered as 100% acceptance to the proposal.2 No special NDE's offered for the quoted valve.3 Quoted valves are available Ex-stock basis & are not constructed referring to any project specification. They comply to API 6D / API 609 (TOV) / ISO 17292 standards. Please confirm acceptance.

We have only considered Dye Penetrant Testing on the Stainless Steel proposed valves and Magnetic Particle Testing on the Carbon Stell proposed valves. No other NDE is considered for these valves. Valves are not tested or

may not be suitable for High Pressure Gas testing, FET, LTT, RT, UT etc. Let us know if any of the mentioned tests are required. We will revise our offer accordingly.

Design

Temp(

℃

)

Manufact.

StandardSize Operator Painting RemarksClass Ends

MaterialBolting Gasket Seals

Sr.

no.

Cust.

Sr. no.Valve Tag Valve

Valve

Type

Legends :-RF - Flanged Raised FaceFB - Full Bore, RB - Reduced boreFBV - Floating ball Valve, TMBV - Trunion mounted ball valve, TOV - Tripple off-set butterfly valves

** TERMS & CONDITIONSPacking Packing will be done in sea / air worthy wooden box.Documentation Charges Only material certificates & shipping documents included in quoted prices. Third Party Inspection Not Included. If TPI is required then the delivery will 2-4 weeks extra to the quoted. Scope of TPI will be limited to visual inspection only. Certification EN10204 3.1. Foundry certificates for Body / Adaptor & Ball will be issued.

Warranty

(a) storage, operations or maintenance of the goods by the Buyer or the end client contrary to prudent industry standards(b) normal wear and tear of the goods.(c) Damages to the Valve and soft parts such as seats and seals during site handling and storage, testing, installation, commissioning and operation not attributable to Virgo.

Order Cancellation charges - Applicable if the order is cancelled or any line item from the order is cancelled after 1 week. Charge will be informed in the event of order cancellation.

Neither Virgo, Virgo Management, nor any of the affiliated entities assumes responsibility for the selection, use, or maintenance of our product. Responsibility of the selection, use & maintenance of our product remains with the end user & the purchaser.

The goods shall carry a warranty for design, material of construction and workmanship for a period of 12 months from the date dispatch. The warranty

obligations of Virgo shall not apply in case of any defects in the goods that may arise due to:

Valve / Actuator Torque Summary

Torque Units : Nm

Weight Units : LB

Actuator Swept Volume Units : cu. in

Pressure Units : psig

Dimension Units : IN

Safety Factor(%) : VBTO=30% VRTO=30% VETO=30% VBTC=30% VRTC=30% VETC=30%

GLOSSARY

VBTO -VALVE BREAK TORQUE OPEN ABTO - ACTUATOR BREAK TORQUE OPEN

VRTO - VALVE RUN TORQUE OPEN ARTO - ACTUATOR RUN TORQUE OPEN

VETO - VALVE END TORQUE OPEN AETO - ACTUATOR END TORQUE OPEN

VBTC - VALVE BREAK TORQUE CLOSE ABTC - ACTUATOR BREAK TORQUE CLOSE

VRTC - VALVE RUN TORQUE CLOSE ARTC - ACTUATOR RUN TORQUE CLOSE

VETC - VALVE END TORQUE CLOSE AETC - ACTUATOR END TORQUE CLOSE

MAST - MAXIMUM ALLOWABLE STEM TORQUE AMT - ACTUATOR MAXIMUM TORQUE

Note: Valve Torque Values Include the Safety Factor

Valve - Size x Pressure

Rating / Tag Number

VBTO

(Nm)

VRTO

(Nm)

VETO

(Nm)

VBTC

(Nm)

VRTC

(Nm)

VETC

(Nm)

MAST

(Nm)

Actuator ABTO

(Nm)

ARTO

(Nm)

AETC

(Nm)

ABTC

(Nm)

ARTC

(Nm)

AETC

(Nm)

AMT

(Nm)

1 1 Ball Valve - 6 x 150 / VIRGO 60 120 - - - - 611 276 398 520 276 489 0 - - - - -

G01010-SR3-CW 166 56 207 895 421 644 1492 728 1237 3439 621 54.33 11.38 11 322.29

2 1 Ball Valve - 10 x 150 / VIRGO 60 120 - - - - 1664 749 1082 1414 749 1331 0 - - - - -

G01012-SR2-CW 116 44 145 1695 832 1400 1702 829 1406 5024 10800 54.33 12.38 13 333.29

Actuator

Breadth

(IN)

Actuator

Height

(IN)

Actuator

Weight

(LB)

MOP

(psig)

MinOP

(psig)

MSP

(psig)

MAWP

(psig)

Actuator

Swept

volume

(cu. in)

Actuator

Length

(IN)

Maximum

Supply

Pressure

(psig)

Line

Number

Customer

Item

Number

Qty Valve

Brand/Mfg

Minimum

Supply

Pressure

(psig)

ARI-Safety Valves REYCO-Full Nozzle-Calculation

ARI-myValve® - Version 3.07

GGCP-00-I0-IS-003-PPProject-No.DescriptionCustomerContactPrepared byOrder

26-PSV-952TAG-No.Note

Temperature 425.0 °CSpecific.volume[υ] 0.0558 m³/kgIsentropic exponent [κ] 1.283

Set pressure [p] 54.0 kp/cm²(g)Build up back pressure 0.0 bar(g)Constant Superimposed back pressure 0.0 bar(g)CDTP 54.5 bar(g)Mass flow [W] 48000.0 kg/hPressure rising[%] 10.0 %

Product dataProductkey 15352200217Model Number RS52MS422CLG0767Type ARI-REYCO R Series 57974-ANSIArticle code 579740100AG1Designation ANSI-Full Nozzle-Safety Relief Valve with flanges - open bonnet - open lifting device -

acc. to API 526Material SA351CF8MMaterial-spring Stainless SteelClass ANSI600 x 150Connection flangeNominal diameter 4"x6"Orifice MCap open bonnet / open lifting deviceOption StandardBellow seal withoutPlug type metallic sealingSet pressure[bar(g)] 52.95Reliving Temperature 425.0 °CTemp./pressure[ISO] Max. 425.0°C at 53.0 bar(g)A0[mm²] 2572.3Certification ASME VIII Steam

d0 57.23 mmA0 2572.3 mm²A0-cal. 2160.6221 mm²K 0.86Valve capacity 57144.72 kg/hReaction force[F] 10612.43 NUsed 84.0 %Kb 1.0Corr. factor - overheated steam [KSH] 0.8299Relieving pressure [p1] 59.27 bar(a)

Media selection Superheated steamMedia and process data Value Unit

Result data Value Unit

Project data

GGCP-00-I0-IS-003-PP-26-PSV-952-calc-en.pdf31 /

2017/01/12

Web : http://www.ari-armaturen.comARI-Armaturen Albert Richter GmbH & Co.KG, 33756 Schloß Holte-Stukenbrock,Tel:(+49) 5207 994-0: Fax:(+49) 5207 994-158

Email : [email protected]



Consider the following additional facts for valve selection:- Material resistance- Limits for set pressure, nominal pressure and temperature- Max. allowable back pressure

Calculating formula acc. to the following regulations: ASME VIII / API 520

Product dataProductkey 15352200217Model Number RS52MS422CLG0767Type ARI-REYCO R Series 57974-ANSIArticle code 579740100AG1Designation ANSI-Full Nozzle-Safety Relief Valve

with flanges - open bonnet - openlifting device - acc. to API 526

Material SA351CF8MMaterial-spring Stainless SteelClass ANSI600 x 150Connection flangeNominal diameter 4"x6"Orifice MCap open bonnet / open lifting deviceOption StandardBellow seal withoutPlug type metallic sealingSet pressure[bar(g)] 52.95RelivingTemperature

425.0 °C

Temp./pressure[ISO] Max. 425.0°C at 53.0 bar(g)A0[mm²] 2572.3Certification ASME VIII Steam

Project-No. GGCP-00-I0-IS-003-PPDescriptionCustomerContactPrepared byOrderTAG-No. 26-PSV-952Note

NPS l l1 H øD1 øK1 n1xød1 b1 øD2 øK2 n2xød2 b2 Wt.[lbs]Dimension in inch

4"x6" 8 7 118,5 8 x 1 2.310,7533 3/4 9,5 8 x 0,88 0.94 230

POS Designation Material Sp.p.1 Body SA351CF8M2 Nozzle BR970 ANSI 600/150 SA351CF8M *3 Stud, Body SA193-B8 Cl.14 Guide SA351CF8M7 Gasket MONEL alloy 400 *8 Nut SA194-812 Disc SA479Gr.316L *14 Stem SA479Gr.316L15 Gasket MONEL alloy 400 *17 Screw, Compression SA479Gr.316L19 Nut SA194-821 Nut SA479Gr.316L22 Screw, Ring Pin SA479Gr.316L23 Pin, Ring/Yoke/Lever SA479Gr.316L26 Step, Spring AISI101529 Lift Lever Assy SA216WCC


2017/01/12





37 Spring Stainless Steel *42 Bonnet SA351CF8M81 Washer, Lifting SA479Gr.316L82 Adapter, Cap SA470Gr.41090 Plug, Pipe SA479Gr.316L91 Step, Spring AISI101593 Point SA479Gr.316L94 Disc Holder SA351CF8M95 Ring, Snap A313Gr.31696 Adj. Ring, Nozzle SA351CF8M97 Nut SA479Gr.316L98 Screw SA193-B7


2017/01/12



PT. TRIMEGAH PUTERA MAKMURRep. Office : Jl. Teluk Gong Raya No. 95 Blok G/5 Jakarta Utara - 14450

Head Office : Komp. Taman Surya I Blok CC-18, Jl. Raya Daan Mogot Kav. 100 - Jakarta

Telp : (021) 29334675, 29334676 Fax : (021) 56949571, 29334675

Email : [email protected] / [email protected]

Website : www.trimegahputeramakmur.com

TO : PT. PP (PERSERO) TBK. Jakarta, 29 December 2016

REF : Q-197 / TPM / X / 2016 Rev 8

TELP / FAX : 021-840 3902 Ext. 1734 / 021-840 3986 SUB : QUOTATION

ATTN. : Procurement, EPC Division PAGE : 1 OF 5

Dear Sir/Madam,

In response to your Inquiry for "GRESIK GAS COGENERATION PLANT PROJECT" and here with our proposal as follows :

PRICE / UNIT AMOUNT

(IDR) (IDR)

Project Code : P-6001

Project Title : Gresik Gas Cogeneration Plant Project

Location : PT Petrokimia Gresik area around 23 km

from Surabaya.

Scope : Control Valve and Pressure Safety Valve

Document No. : GGCP-00-I0-MR-008-PP

Contract No. : 010/SP/DIR/XI/2015

Control Valve, offer by : KOSO, made in Japan

1 Tag No. : 26-PV-958 1 Set 290.337.000,00 290.337.000,00

6" x 4" x 6" ANSI 150# RF

Multi-Hole Cage Guided Valve - 550G

2 Tag No. : 26-PV-951 1 Set 430.128.000,00 430.128.000,00

6" x 5" x 6" ANSI 600# RF


3 Tag No. : 26-PV-953 1 Set 149.052.000,00 149.052.000,00

2" x 1-1/2" x 2" ANSI 600# RF


PSV, offer by : BOPP & REUTHER, made in Germany

4 Tag No. : 04-PSV-301 1 Set 23.747.000,00 23.747.000,00

Model : SiC 1321 AB 00 (Conventional, Closed

Bonnet)

Size : 3/4" ANSI 150#RF x 1" ANSI 150#RF

Material : A 216 WCB Body with 316L Seat and

316Ti Disc

Media : Water

Seat Dia. : 12.2mm

Set Pressure : 5kg/cm²g

C/w : Packed lifting lever and Test Gag

QUANTITYDESCRIPTIONSITEM

NO.



Telp : (021) 29334675, 29334676 Fax : (021) 56949571, 29334675




REF : Q-197 / TPM / X / 2016 Rev 8



PRICE / UNIT AMOUNT

(IDR) (IDR)

5 Tag No. : 04-PSV-302 1 Set 23.747.000,00 23.747.000,00

Model : Si 1321 AB 00 (Conventional, Closed

Bonnet)



316Ti Disc

Media : Steam

Seat Dia. : 12.2mm



6 Tag No. : Tag No. : 04-PSV-303A 1 Set 23.747.000,00 23.747.000,00


Bonnet)



316Ti Disc

Media : Steam

Seat Dia. : 12.2mm



7 Tag No. : 04-PSV-303B 1 Set 23.747.000,00 23.747.000,00


Bonnet)



316Ti Disc

Media : Steam

Seat Dia. : 12.2mm



8 Tag No. : 26-PSV-952 1 Set 132.623.000,00 132.623.000,00

Model : Si 8304 AB 00 (Conventional, Closed

Bonnet)

Size : 4" ANSI 150#RF x 6" ANSI 150#RF

Material : A 216 WCB Body with 316L Seat and Disc

ITEM

NO. DESCRIPTIONS QUANTITY



Telp : (021) 29334675, 29334676 Fax : (021) 56949571, 29334675




REF : Q-197 / TPM / X / 2016 Rev 8



PRICE / UNIT AMOUNT

(IDR) (IDR)

Media : Steam

Orifice : M



On-Off Valve, offer by : KOSO, made in Japan

9 Tag No. : 07-XV-426 1 Set 284.363.000,00 284.363.000,00

6" x 6" ANSI 150# RF

Parallel Slide Gate Valve - 400H

10 Tag No. : 07-XV-427 1 Set 284.363.000,00 284.363.000,00

6" x 6" ANSI 150# RF


11 Tag No. : 07-XV-461 1 Set 381.142.000,00 381.142.000,00

10" x 10" ANSI 150# RF


12 Tag No. : 08-XV-476 1 Set 225.220.000,00 225.220.000,00

6" x 6" ANSI 150# RF


Solenoid Valve, offer by : NORGREN, made in Germany

13 Tag No. : 07-XV-462 1 Set 32.434.000,00 32.434.000,00

Model : 8303647.9101.02400

Size : 1-1/2"

14 Tag No. : 07-XV-463 1 Set 32.434.000,00 32.434.000,00

Model : 8303647.9101.02400

Size : 1-1/2"

15 Tag No. : 07-XV-464 1 Set 21.492.000,00 21.492.000,00

Model : 8303447.9101.02400

Size : 1"

ITEM




Telp : (021) 29334675, 29334676 Fax : (021) 56949571, 29334675




REF : Q-197 / TPM / X / 2016 Rev 8



PRICE / UNIT AMOUNT

(IDR) (IDR)

Notes :

KOSO

• Please note that we have quoted based on comparable specifications to your provided data sheets. Issues like noise &

velocity have been ignored.

• Of course it would be possible for us to quote based on the best solutions to eliminate any such issues but there will be

major cost added as we will need to upgrade to our superior valve models.

• Delivery time : Assuming if you can place the PO on this week, our best delivery is mid up to end of June 2017.

Please note that the factory of origin will be possibly be our KOSO China facility since we are trying to shorten the delivery

as much as possible.

BOPP & REUTHER

• Certificates is Valve come with material and test certificate acc to EN 10204-3.1

• Certain Valve model may be casted in China/India but machined, assembled & tested in Germany.

Regardless of the casting origin, the quality of Bopp & Reuther valve is valid and under warranty per the factory's terms

and conditions.

• Prices quoted do not include site service / commissioning works.

• Relief valves quoted are based upon our interpretation of the information available at the time of the quote.

We reserve the right to revise our quote upon receipt of additional customer requirements or change in quantity.

• All valves are tested and certified by manufacturer, any local additional valve testing is chargeable.

• Deliveries are based on present plant capacity & material availability. Upon purchase order entry, deliveries will be

re-confirmed and no cancellation of order is allowed.

• Attached with product catalogues for your reference.

• Price Quoted is based on quantity required. Any changes in quantity is subject to requote.

• Delivery time is 22 working weeks ARO.

NORGREN

• Delivery time is 14 working weeks ARO.

ITEM




Telp : (021) 29334675, 29334676 Fax : (021) 56949571, 29334675




REF : Q-197 / TPM / X / 2016 Rev 8



PRICE / UNIT AMOUNT

(IDR) (IDR)

TOTAL 2.358.576.000,00Rp

PRICE : netto in IDR at FOT Jakarta/Gresik, excluded of VAT 10%.

DELIVERY TIME : as per stated above and will be effective since we received the engineering

approval.

PAYMENT : by SKBDN 45 days after received invoicing documents by issuing bank (BNI)

with termin as the following below :

▫ 5% after engineering approval.

▫ 10% after fabrication factory (test reports).

▫ 10% after factory acceptance (certificates).

▫ 70% after the goods is received on site (at DDP Gresik).

▫ 5% after retention 3 months.

VALIDITY : 30 days

REMARKS by Sea Freight

Should you have any questions, please feel free to contact us.

We look forward to receive your good news soon and thank you for your kind attention.

Best Regards,

Novi

CC : Vincentius Rudy

ITEM


I. CONTROL VALVE

II. ON-OFF VALVE

III. 2 WAY SOLENOID VALVE

IV. PRESSURE SAFETY VALVE

No Description RAPK PT. Control System Remarks PT...

Documents

Transcript of No Description RAPK PT. Control System Remarks PT...