NLX3000

Rigid and Precise CNC Lathe

NLX3000

www.dmgmori.com

Equipped with “Mature” and “Evolved” BMT Technology

While inheriting features like high-rigidity slideways from previous models,

the new NLX Series models also offer “maturity”, with better reliability and durability.

Evolved BMT technology gives them high-speed performance, achieving a maximum rotational speed of

10,000 min-1 with an acceleration time of a mere 0.45 seconds. There has also been a major advance in

terms of accuracy, thanks to the effects of the BMT technology and DMG MORI SEIKI’s original thermal

displacement control technology for restricting vibration to less than a third,

and turret temperature rise to less than a tenth of what it was.

Quite simply, these are high-rigidity, high-precision CNC lathes for the next generation.

Y-axis

X-axis

Z-axis

C-axis

NLX3000Y

Built-in motor headstock

Slideways are used for all axes

Tailstock：Digital tailstock

Main features

Main features

NLX3000 adopt slideways on all axes for improved damping characteristics and dynamic rigidity.

Slideways are used for all axes

■ Travel

X-axis : 280 mm (11.0 in.)

Z-axis : 820 mm (32.3 in.)

Y-axis : 120 <±60>�mm (4.7 <±2.4> in.) <Y-type>

Tailstock : 734 mm (28.9 in.)

■ Rapid traverse rate

X-axis : 30 m/min (1,181.1 ipm)

Z-axis : 30 m/min (1,181.1 ipm)

Y-axis : 10 m/min (393.7 ipm) <Y-type>

C-axis : 400 min-1

Tailstock : 7/20 m/min (275.6/787.4 ipm) <forward/retract>

■ Max. turning diameter

■ Max. turning length

430 mm (16.9 in.)

713 mm (28.0 in.)

Spacious work area.

Max. turning diameter

Max. turning length

Basic structure #

Working area #

Y-axis specifi cations #

■ Max. spindle speed ■ Standard chuck size

3,000 min-1 12 inches

We have enhanced the labyrinth structure by taking the frequent use of high-pressure coolant into account. A spindle air purge is also equipped as standard to prevent coolant from infiltrating into the spindle, improving spindle durability.

Sophisticated spindle labyrinth＋Air purge for spindle

The Y-axis is created by linking the feed of the X-axis and the simulating axes. We have made the axis unit compact and restricted the height of the machine.

■ Y-axis travel

±60 mm (±2.4 in.)

■ Circumferential grooving on a turning center with Y-axis control

ab

Milling without Y-axis controlIt is hard to match the width of outer (a) and inner (b) grooves.

Milling on the NLX SeriesGroove width can be matched using Y-axis control.

Sim

ulat

ing

axis

X-ax

is

Spindle #

Tailstock #

Digital tailstock installed

The high-rigidity digital tailstock driven by a servo motor significantly reduces setup time.

Reduced by over 50%

Reduced by over 20%

■ Setup time

■ Tailstock spindle operating time

■　Chip fl ushing coolant

Chip flushing coolant is featured as standard at the base of the digital tailstock, improving chip processing capability.

● Fewer steps requiring operation of the tailstock

● Operating time reduced ● Variable pressure control using

program instructions● Simple operation using MAPPS

Y

Main features

Main features

The turret with an optimum center of gravity location offers significantly improved tool tip rigidity.

●　 Photo: 12-station turret head (option).

BMT (Built-in Motor Turret) installed in the turret

■ Displacement amountPrevious model (5,000 min-1)

3.05 μmNLX2500 (10,000 min-1)

0.43 μm

■ Turret temperature increases

■ Vibration amplitude

Compared with conventional machine

Compared with conventional machine

1/10 or less

1/3 or less

MC Y

Original technology

● Improved milling power● Improved milling accuracy ● Controls the turret’s heat and vibration● Reduced energy loss

Turret #

“Mature” and “Evolved” BMT Technology #

BMT (Built-in Motor Turret) installed in the turret

■ Number of tool stations

10 tools ���

12 tools OP ����

■ Turret indexing time <1-station>

0.3 sec.●　 Depending on the number and arrangement of tools,

the turret indexing time may be longer.

■ Overhang of O.D. cutting rotary tool

100 mm (3.9 in.)� OP

10,000 min-1

■ Max. rotary tool spindle speed

High precision

High-precision equipment

OP

OP

OptionOP

Coolant cooling system (separate type) #

Direct scale feedback #

Thorough Thermal Displacement Control

There are a variety of factors leading to the thermal displacement that has a major influence on machining accuracy, including heat generation and changes in room temperature while the machine is operating, and coolant temperature rise. These machines implement DMG MORI SEIKI’s original thermal displacement control where each of these factors is thoroughly addressed from all angles.

The absolute magnetic linear scale (full closed-loop control) made by Magnescale is effective for high-precision positioning, and is available as an option.

0.01 μmResolution

High accuracy absolute scale SR87

Coolant cooling system (separate type)

Coolant tank●　�While this unit is not the only way to completely control the temperature of the coolant, it makes

a major contribution to preventing increases in the oil temperature.

When using oil-based coolant, please be sure to consult with our sales representative.

Raised coolant temperature causes thermal displacement in the fixtures and workpiece, affecting the machining accuracy of the workpiece. Use this unit to prevent the coolant from heating up. When using oil-based coolant, the coolant temperature can become extremely high even with the standard coolant pump, so please be sure to select this unit.

Thorough Thermal Displacement Control

Coolant circulation for casting parts

DMG MORI SEIKI has developed a new technology to circulate coolant through the casting parts as a measure against thermal displacement that directly affects machining accuracy. Thermal displacement is caused by various factors including non-uniform expansion and contraction due to difference in thickness of the casting; uneven heat generation in the slideways; operating environment; and changes in ambient temperature due to season and time of day. The coolant circulation maintains a uniform temperature inside the casting parts, and minimizes deformation in the machine.

Thermal Displacement Control #

● High accuracy, high resolution● Greater accuracy than optical scale ● Highly resistant to condensation and oil● Vibration and impact resistant characteristics

● Uniform thermal displacement● Resistance to changes in ambient temperature● High-accuracy long-term machining

Improved workability/Maintenance

Improved workability/Maintenance

The NLX3000 is designed with features for ease of maintenance to increase the machine operating rate. Operating convenience has also been improved by reflecting customers’ demands in the design.

NLX3000Y

With the new design, the coolant tank can be pulled out in front without having to pull out the chip conveyor. It can be pulled out easily and does not take up extra space in the back.

Reducing the weight of the doors has lessened the load when they are opened and closed, for example during setup work.

The oil cooler and hydraulic unit are placed together at the rear of the machine without a cover for easy access.

The supply hole for the lubricant tank for the box way is located in the front of the machine for easy refilling.

The air equipment is located on the right side panel in order to facilitate maintenance.

The chuck cover is provided with a pocket to accommodate tool overhang, preventing interference.

Pull out the coolant tank in front #

Lighter doors # Oil cooler, Hydraulic unit #

Lubricating oil (for sliding surfaces) tank #

Layout of pneumatic equipment #

Interference prevention pocket#

S45C: Carbon steel JIS: Japanese Industrial Standard＊�1045, 1046 (ANSI), C45, C45E, C45R (BS, DIN), 45 (GB)

Peripheral equipment

Peripheral equipment

A chip conveyor that efficiently disposes of chips. Choose the specifications right for you.

Scraper typeHinge type

Improved chip disposal

Specifications

Workpiece material and chip size

Steel Cast iron Aluminum/non-ferrous metal

Long Short Powdery Short Long Short Powdery

Hinge type ○ ○ × × ○ × ×Hinge type <Aluminum> × × × × × ○ ×Scraper type × ○ ○ ○ × × ×Magnet scraper type × ◎ ◎ ◎ × × ×● Chip size guidelines

Short: chips 50 mm (2.0 in.) or less in length, bundles of chips A 40 mm (A 1.6 in.) or lessLong: bigger than the above

●��The options table below the general options when using coolant. Changes may be necessary if you are not using coolant, or depending on the amount of coolant, compatibility with machines, or the specifications required.

●��Please select a chip conveyor to suit the shape of your chips. When using special or difficult-to-cut material (chip hardness HRC45 or higher), please consult with our sales representative.●� Chip conveyors are available in various types for handling chips of different shape and material. For details, please consult with our sales representative.

　◎ : Ideal　○ : Suitable　×: Not suitable

Perform tool measurement more efficiently, thereby improving setup.

Air＋Oil mist Misting device

OP

Chip conveyor #

Semi-dry unit #

Manual type in-machine tool presetter #

OP

Mist collector

Hydraulic steady rest

Coolant float switch

● The colors and configurations shown in the photographs or illustrations may differ from those of the actual product.

Collet chuck

Others # OP

When measuring a workpiece length When measuring a workpiece diameter

In-machine workpiece measuring system # OP

Transfer system

We have achieved completely automated start-to-finish machining using only one machine, from material supply to discharging the completed workpiece. This is a high-speed mass production system that reduces non-cutting time.

█ Loader hand

A close confirmation switch comes as a standard feature, thus improving the reliability of the work chucking.

Parallel hands Back end hands Hand for shaft workpieces

█ Workstocker

A ball caster wheel conveyor is used because it does not cause many chip problems.

Item NLX3000Gantry-type loader Max. travel speed

X-axis <hand up/down> 90 m/min (295.3 fpm)Z-axis <loader unit left/right> 120 m/min (393.7 fpm)

Loader hand

Model Parallel hands (Back end hands)Max. transfer weight 10 kg (22 lb.)×2Applicable workpiece diameter 40−250 mm (1.6−9.8 in.)Applicable workpiece length 20−150 mm (0.8−5.9 in.)

Workstocker

Number of pallet tables 10 <20>Max. workpiece weight 75 kg (165 lb.)/palletMax. workpiece stacked height 470 mm (18.5 in.)Applicable workpiece diameter 40−250 mm (1.6−9.8 in.)

●　 The photo shows the NLX2500. The NLX3000 loader system has different specifications and a shape.

OptionOP

Rotary workstocker Flat workstocker Workstocker for shaft workpieces

Belt conveyor

Gantry loader # Consultation is required

Support for a variety of automation systems

■ Loader travel speed <travel>

120 m/min (393.7 fpm)

█ Example: The gantry loader system specifi cation

Consultation is required

Consultation is required

●　� The specification shown above is an example. For details, please consult with our sales representative.

Peripheral equipment

Transfer system

■ Applicable workpiece diameter

80 mm (3.1 in.)�■ Applicable workpiece length

200 mm (7.9 in.)�■ Max. transfer weight

● Not available when the steady rest is selected, because of interference. For standard machines, it is necessary to remove the workpiece unloader when the steady rest specifications are selected.

● The photo shows the NLX2000.

4.0 kg (8.8 lb.)�

OP

We have further developed the previous parts catcher so that it can now be customized more easily by the end user. It can handle workpieces up to double the previous length.

■ Bar work capacity

A 90 mm (A 3.5 in.)＊

Recommended accessories for bar feeder specification

● Guide bush

● Work stopper

● Bar feeder

● Multiple counter

● Signal tower ＊　 Depending on the chuck/cylinder used and its restrictions, it may not be possible to reach full bar work capacity.

This temporary workpiece rest helps reliably carry out workpiece chucking in a short period.

Fixed type

Interference and accumulation of chips during machining is prevented by withdrawing the workpiece retainer.

Withdrawal type

Complete bar machining is possible on a single machine when coupled with a workpiece unloader. You won’t need a work loader/unloader or turnover unit.

OP

NLX2500Bar feeder

Workpiece unloader (built-in type) #

Bar feeder #

Workpiece rest #

Consultation is required

OP

Package OP

DMSQP (DMG Mori Seiki Qualifi ed Products) OP

Comprehensive support with machine+peripherals

DMG MORI SEIKI Service Center

■ Advantages of DMSQP● Qualifi ed peripherals are arranged by DMG MORI SEIKI● Two-year warranty, the same as machines

(Parts relating to machine breakdown will be guaranteed free for 2 years from the date of installation, and labor costs to repair will be free for 1 year)

● Toll-free phone support is available 24 hours a day, 365 days a year (Japan only)

Coolant cooling system

Mist collector

Hydraulic steady rest

DMSQP

●�For more details on DMSQP items, please contact our sales representative.

The DMSQP program is designed to certify peripherals that meet DMG MORI SEIKI standards in quality, performance and maintainability. DMSQP provides customers with even greater peace of mind.

Selected peripherals with superior quality, performance and maintainability.

DMG MORI SEIKI provides comprehensive support, from proposal to delivery and maintenance, for high-quality peripherals that offer superior performance and maintainability.

OptionOP

Comprehensive support with machine＋peripherals #

Machine

●�For more details on packages, please contact our sales representative.

Example of packages #

Packages are available according to varieties of customers’ production forms.

Basic package Chip disposal package Rotary tool holder package

MAPPS Ⅳ

for CNC Lathes

A new high-performance operating system that pursues ease of use, and combines the best hardware in the industry with the advanced application/network systems.

Fixed-point in-machine cameraImages taken by cameras installed inside/outside the machine can be viewed on the programming screen. This function is useful for maintenance.

Examples of camera locations・　�Inside machine

(to check machining)

・　 Tool magazine (to check cutting tools)

・　 Chip bucket (to check chip accumulation)

MAPPS: Mori Advanced Programming Production System

A New High-Performance Operating System

Alarm help functionWhen an alarm occurs, MAPPS identifi es the cause of the trouble and provides solutions.

File display and Memo functionData necessary for setups such as operating instructions, drawing data and text data can be viewed on MAPPS. Text data is editable.

Viewable file types

・　PDF ・　�TXT (Editable)

・　�Any fi le that can be displayed with Internet Explorer is available

●�10.4-inch operation panel

Consultation is requiredOP

Vertical soft-keys

Keyboard

Mouse tray OP

The vertical soft-keys can be used as option buttons or shortcut keys to which you can assign your desired screens and functions, allowing you to quickly display the screen you want.

A PC-type keyboard is used as standard, making key input easy.

The mouse tray can be attached when using a mouse.

Mouse tray OP

▶　Outstanding operability thanks to upgraded hardware▶　Enhanced functionality by using CAM software (option)▶　New functions for easier setup and maintenance▶　 Various types of monitoring, including internal monitoring,

are possible on the screen (option)▶　 In the event of trouble, DMG MORI SEIKI’s remote maintenance

service solves it smoothly MORI-NET Global Edition Advance OP

DNC operation with external memory (USB) OP

DNC operation can be performed using programs stored in an external memory (USB). It is also possible to transfer data between an external memory and the NC memory and delete/copy/rename programs in an external memory.

●　 Macro programs such as GOTO, IF and WHILE cannot be used in DNC operating programs.

Outstanding operability #

Program management # Improved ease of setup #

Improved ease of maintenance # Improved work effi ciency #

MAPPS Ⅳ ＋ ESPRIT®

■ Machining menu ■ Contour input■ List display function

■ DXF import function＊1 OP■ Relief machining OP

■ Simple soft jaw forming function

●�The photo shown may differ from actual machine.●�Information about the screen is current as of July 2013.

OptionOP

■ Remote Desktop <Patent pending> ■ License borrowing system ■ Support system

This function allows users to create programs simply by following the guidance on the screen.Much of the programming process has been simplifi ed due to the minimal key entry required for even the most complex shapes.

ESPRIT® allows you to create complex 3D programming with high-added value. By just installing the software on your PC with connection to LAN, you will be able to use it. (Once the software is started on the computer, it can be used for up to 7 days without LAN connection)

ESPRIT® installed on your PC can be operated from your machine via LAN.＊3 (It cannot be simultaneously started up on more than one PC)

By borrowing the ESPRIT® license from the machine over LAN, ESPRIT® can be run on the PC up to 7 days without LAN connection (or turning on the machine).

Distributors/Trading companies, DMG MORI SEIKI Technical Centers and ESPRIT® Support Team will answer inquiries about the CAM software.

● Postprocessor as standard● CAM software will be ready to use once your machine is installed● Cost for introducing CAM software can be saved● ESPRIT® data can be modifi ed on the machine

(through Remote Desktop connection＊2)

● The software can be installed on multiple PCs on the network(It cannot be simultaneously started up on more than one PC)

● 2-year warranty support (including free update)

MORI Automatic Programming System for Lathes

OP

Application systems which let you create machining programs easily on your PC.

● Easy operation, simply by entering theproduct shapes while following theinstructions on the screen.

● Its functions, data and operability arefully compatible with the conversationalprogramming system of the MAPPS Ⅳ operating systems.

OP

＊1�A mouse is required. Please prepare a mouse by yourself.

＊2�Applicable Operating Systems: Windows® Vista Business/Ultimate, Windows® 7 Professional/Ultimate＊3�A mouse is required. Please prepare a mouse by yourself.● A PC is required to use ESPRIT®. Please prepare PCs by yourself.

Conversational automatic programming #

CAM software #

LAN

Machine

PC

Remotely operate the PC screen from MAPPS

LAN

MachinePC

ESPRIT® is available up to 7 days with no LAN

connection

ESPRIT®

LicenseESPRIT®

LicenseLicense

Borrow license

MAPPS ⅣMAPPS Ⅳ

This is an application which allows you to remotely operate and view the MAPPS screens from your office computer.

This enables high-speed transfer of programming data between your office computer and machine, reducing the lead time of pre-machining processes.

DMG MORI SEIKI’s software Line-up

For shorter total production time for all our customers

This network system application achieves fast information sharing and increased production effi ciency.

Remote Maintenance/Machine Operation Monitoring Service

Machine Operation Monitoring System

Application for Data Transmission MAPPS Screen Remote Control and Browsing Application

【Plant】

【Plant】

[Standard features]

Receive e-mail notifi cation

View operating status report

Receive e-mail notifi cation

【DMG MORI SEIKI’s Service Center】

【Company’s own server】

Server

Hub

Router

●　 Remote maintenance service by DMG MORI SEIKI Service Center

●　 Internet-based, high speed (max. 1 Gbps), large capacity network

●　 No server installation is required ―reduction in initial cost

●　 Download various data from the server located at DMG MORI SEIKI

●　 Intra-corporate network system

●　 Up to 30 machines can be connected with one server

●　 The operating status of your machines can be centrally managed in real time

■ Features

■ Features

【Office】

【Outside the office】

【Outside the office】

Receive remote diagnosis

Download data

Download data

Send alarm notifi cation

Hub

OP

OP

OP

Store operating status reports

Send alarm notifi cation

【Office】

Receive e-mail notifi cation

<Real time>Check operating status

■ Remote alarm support

When an alarm goes off, an alarm notification will be sent to the DMG MORI SEIKI Service Center simply by pressing the “Send e-mail” button on MAPPS. DMG MORI SEIKI service personnel will remotely diagnose the cause of the problem, and quickly provide solutions for machine recovery.

【Plant】 【Plant】【DMG MORI SEIKI’s Service Center】

① E-mail describing the details of the alarm is sent to the Service Center from MAPPS.

② Remotely diagnose the cause of the problem.

③ Provide appropriate solutions forthe problem, such as conductingremote operation, deliveringreplacement parts and sendingservice personnel.②

Problem Recovery

Upon receiving the alarm, the Service Center will contact the customer by phone. (Manual or Automatic alarm sending is selectable)

If recovery is not possible by remote operation, service personnel will quickly visit the customer’s factory.●　 This service may not be available in some

areas. Please contact our sales representative for details.

Store operating status reports

Conduct remote diagnosis

View operating status report

Receive e-mail notifi cation

MORI-NET, MORI-SERVER, MORI-MONITORNetwork Application Systems

【Internet】 【LAN】

NETWORK_E01_cs5.indd 1 13/09/19 19:57

③

Recovery

OptionOP

DMG MORI SEIKI’s new proposal, ACT, is designed to strengthen connections between machine tools and peripheral equipment by standardizing communication and software of the entire system. With ACT, standardization of interfaces of peripherals, simplified wiring, and labor saving can be achieved.

This industrial network using the standard Ethernet (TCP/IP) offers high speed and reliable connection. Simple Plug and Play connections, which are made available just by connecting to the hub through MAPPS, enable you to build a system easily.The use of standard cables also helps to reduce costs.

MTConnect, which was introduced by the Association for Manufacturing Technology (AMT) in 2008, is a new XML (Extensible Markup Language) based communication protocol that offers an open interface. This interface allows you to build a system to monitor the operating status of your machines.

Advanced Communication Technology

MAPPS EtherNet/IP I/F OP

MAPPS MTConnect I/F

Advanced Communication Technology (ACT) connects machine tool and peripheral devices

■ Easy system construction■ Connection with existing devices■ Inexpensive devices

You can check the operating history on the Gantt chart screen.

●　 Connections between a machine and peripheral equipment become easy because standard LAN cables are used

●　 Thanks to increased versatility, your peripheral equipment can be used even when the machine tools are replaced by new ones

●　 Reliability is significantly increased by reducing the number of I/O cables

●　 Open communication interface allows you to access to your company’s system

●　 This makes it possible for you to build a system to monitor the operating status of your machines via the Internet

■ Features

■ Features

■ System examples

Operating status can be checked in real time.

Your machines are displayed all at once, allowing you to quickly call up the machine you wish to check.

■ Application examples

Industrial Network for Peripheral Equipment Control

Communication Interface for Monitoring Machine Operation

●　 A server and application must be prepared by the customer.●　For introduction of MTConnect, separate consultation is required.

【Internet】 【LAN】

Other devices

Measuring equipment Tool presetter

Machine

Hub

Robot

Adapter 1

ServerAdapter 2

Adapter 3

Outside the offi ce

Offi ce

Other terminal deviceAgent 1

Agent 2

Application

Router

NETWORK_E01_cs5.indd 2 13/09/19 19:57

OptionOP

Environmental performance

Reduction in environmental burden

Power consumption is reduced while operating the machine effi ciently.

If the operation panel is not touched for a certain amount of time, the interior light automatically turns off. This saves energy and lengthens the life of the machine lights.

If the keyboard is not touched after a certain amount of time and NC operation is not being performed, power is cut off to the servo motor, the spindle, the coolant pump and the chip conveyor, thereby saving energy.

Automatic machine light function

Automatic sleep function

LED with high luminous effi ciency offers a high light output at a low wattage, contributing to reducing electricity use.

To conserve limited resources and protect global environment. The NLX3000 pursues a high “environmental performance” that is required of machine tools.

LED lighting #Power-saving function #

Machine specifications (NLX3000/700)

Item NLX3000/700 NLX3000MC/700 NLX3000Y/700

Capacity

Swing over bed mm (in.) 978 (38.5) <interference with front cover 612 (24.1)>

Swing over cross slide mm (in.) 808 (31.8)

Max. turning diameter mm (in.) 430 (16.9) <for O.D. cutting tool with an overhang of 35 mm (1.4 in.)>420 (16.5) <for O.D. cutting tool with an overhang of 40 mm (1.6 in.)>

Standard turning diameter mm (in.) 358 (14.0) <for O.D. cutting tool with an overhang of 35 mm (1.4 in.)>366 (14.4) <for O.D. cutting tool with an overhang of 40 mm (1.6 in.)>

Max. turning length mm (in.) 713 (28.0)

Bar work capacity mm (in.) 90 (3.5)＊ [102 (4.0)＊]

TravelX-axis travel mm (in.) 280 (11.0)

Z-axis travel mm (in.) 820 (32.3)

Y-axis travel mm (in.) − 120 <±60> (4.7 <±2.4>)

Spindle

Max. spindle speed� min-1 3,000 [3,000 <high output>]

Type of spindle nose JIS A2-8

Through-spindle hole diameter mm (in.) 111 (4.4)

Min. spindle indexing angle − 0.001゜Spindle bearing inner diameter mm (in.) 160 (6.3)

Turret

Number of tool stations 10 [12]

Shank height for square tool mm (in.) 25 (1)

Shank diameter for boring bar mm (in.) 50 (2)

Tool shank diameter for rotary tool mm (in.) − 26 (1.0)

Turret indexing time s 0.3Max. rotary tool spindle speed� min-1 − 10,000 [4,000 <high torque>]

Feedrate Rapid traverse rate�� mm/min (ipm)X, Z: 30,000 (1,181.1)

Tailstock <forward/retract>: 7,000/20,000 (275.6/787.4)

X, Z: 30,000 (1,181.1)Tailstock <forward/retract>: 7,000/20,000 (275.6/787.4)

C：400 min-1

X, Z: 30,000 (1,181.1)Y: 10,000 (393.7)

Tailstock <forward/retract>: 7,000/20,000 (275.6/787.4)

C：400 min-1

TailstockTailstock travel mm (in.) 734 (28.9)

Tailstock spindle diameter mm (in.) 110 (4.3)

Taper hole of tailstock spindle Live center <MT5> [Built-in center <MT4>]

Motor

Spindle drive motor <30 min/cont> kW (HP) 22/18.5 (30/24.7) [30/25 (40/33.3)]

Rotary tool spindle drive motor <3 min/5 min/cont>

kW (HP) − 5.5/5.5/3.7 (7.5/7.5/5) [5.5/3.7/2.2 (7.5/5/3) <10 min/15 min/cont> <high torque>]

Feed motor kW (HP) X: 2.0 (2.7) Z：4.5 (6) X：3.0 (4) Z：4.5 (6) X, Y：3.0 (4) Z：4.5 (6)

Power sources<standard>

Electrical power supply <cont>������I94288A18��kVA 31.9 36.9 39.4

Compressed air supply� MPa (psi), L/min (gpm)ー

(a compressed air supply may be needed, depending on options and peripheral equipment)

0.5 (72.5), 250 (66.0) {when the tool tip air blow is regularly used, air supply of more than 300 L/min (79.2 gpm) is separately required} <ANR>

Tank capacity Coolant tank capacity L (gal.) 300 (79.2)

Machine sizeMachine height <from floor> mm (in.) 2,270 (89.4)

Floor space <width×depth> mm (in.) 3,580×2,096 (140.9×82.5)

Mass of machine kg (lb.) 6,800 (14,960) 6,850 (15,070) 7,100 (15,620)[ ] Option JIS: Japanese Industrial Standard

＊　Depending on the chuck/cylinder used and its restrictions, it may not be possible to reach full bar work capacity.●　Max. spindle speed: depending on restrictions imposed by the workpiece clamping device, fixture and tool used, it may not be possible to rotate at the maximum spindle speed.●　Power sources, machine size: the actual values may differ from those specified in the catalogue, depending on the optional features and peripheral equipment.●　�Compressed air supply: please be sure to supply clean compressed air <air pressure: 0.7 MPa (101.5 psi), pressure dew point: 10 ℃ (50 °F) or below>.●　�A criterion capacity to select a compressor is 90 L/min (23.8 gpm) per 0.75 kW (1 HP). However, this figure may differ depending on the type of compressors and options attached.

For details, please check the compressor specifications.●　�The information in this catalog is valid as of July 2013.

EXPORTATION: All contracts are subject to export permit by the Government of Japan. Customer shall comply with the laws and regulations of the exporting country governing the exportation or re-exportation of the Equipment, including but not limited to the Export Administration Regulations. The Equipment is subject to export restrictions imposed by Japan and other exporting countries and the Customer will not export or permit the export of the Equipment anywhere outside the exporting country without proper government authorization. To prevent the illegal diversion of the Equipment to individuals or nations that threaten international security, it may include a “Relocation Machine Security Function” that automatically disables the Equipment if it is moved following installation. If the Equipment is so-disabled, it can only be re-enabled by contacting DMG MORI SEIKI or its distributor representative. DMG MORI SEIKI and its distributor representative may refuse to re-enable the Equipment if it determines that doing so would be an unauthorized export of technology or otherwise violates applicable export restrictions. DMG MORI SEIKI and its distributor representative shall have no obligation to re-enable such Equipment. DMG MORI SEIKI and its distributor representative shall have no liability (including for lost profits or business interruption or under the limited service warranty included herein) as a result of the Equipment being disabled.

<Precautions for Machine Relocation>

Nagoya Head Office □ 2-35-16 Meieki, Nakamura-ku, Nagoya City, Aichi 450-0002, Japan Phone: +81-52-587-1811

Tokyo Branch □ 18th floor, Shinagawa Intercity Tower A, 2-15-1 Konan Minato-ku, Tokyo 108-6018, Japan Phone: +81-3-5460-3570Nara Campus Nara No. 1 Plant □ 362 Idono-cho, Yamato-Koriyama City, Nara 639-1183, Japan Phone: +81-743-53-1121

Nara No. 2 Plant □ 106 Kita-Koriyama-cho, Yamato-Koriyama City, Nara 639-1160, Japan Phone: +81-743-53-1125Iga Campus □ 201 Midai, Iga City, Mie 519-1414, Japan Phone: +81-595-45-4151Chiba Campus □ 488-19 Suzumi-cho, Funabashi City, Chiba 274-0052, Japan Phone: +81-47-410-8800

DMG MORI SEIKI CO., LTD.

●　 DCG, DDM, BMT and ORC are trademarks or registered trademarks of DMG MORI SEIKI CO., LTD. in Japan, the USA and other countries.●　 If you have any questions regarding the content, contact our sales representative.●　 The information in this catalog is valid as of October 2013. Designs and specifications are subject to changes without notice.●　 The machines shown in the catalog may differ from the actual machines. The location and the size of the nameplates may also differ from the actual machines, or the nameplates may not be

attached to some machines.●　 DMG MORI SEIKI is not responsible for differences between the information in the catalog and the actual machine.

2-year warranty, twice the peace of mind. For machines delivered outside of Japan, parts relating to machine breakdown will be guaranteed free for 2 years from the date of installation, and labor costs to repair will be free for 1 year. Please contact our sales representative for details.

NLX3000-EA04-1ABD(N)

D.1310.CDT.0000

Created in Japan