Nixtox Vapor Phase Radial Adsorber Activated Carbon

Click here to load reader

Upload
tigg-llc
Category

Technology
view
42
download
3

Embed Size (px):

description

NIXTOX Radial Flow activated carbon adsorbers are designed for industrial emissions control and environmental remediation when relatively high flow rates require a low pressure drop. The activated carbon is contained in an annulus between two stainless steel screens attached to expanded metal. These activated carbon adsorption systems can be used with or without an Accumulator Cabinet. When an Accumulator Cabinet is used to house the radial flow activated carbon adsorber, condensate drains and breakthrough indicators are provided. Model numbers reflect the design flow for most vapor phase environmental remediation applications. Model # Nominal Flow (CFM) Max Temp Max Pressure (PSIG) Diameter/ Height (IN) Standard Fill (LBS) Shipping Weight N-500 500 150 OPEN 24/42 200 360 N-1000 1,000 150 OPEN 31/47 400 620 N-1500 1,500 150 OPEN 31/.47 300 540 N-3000 3,000 150 OPEN 46/75 1,600 2,200 Call a TIGG Representative Today at 800-925-0011 03/14 TIGG 800-925-0011 www.TIGGtanks.com www.TIGG.com TIGG Corporation 1 Willow Avenue Oakdale, PA 15071 Purifying Air & Water http://www.tigg.com/Radial-Flow.html Modular Activated Carbon Vapor Adsorber Drums NOTES: • Nominal flow may be conservative. Desired contact time may allow higher or lower flow rates. • Dry virgin activated or reactivated carbon provided as standard adsorbent. • Adsorbent fill is based on a bed density of 27 lb/ft3. • Adsorbent fill can differ based on variable bed density and alternate adsorbents. • Pressure drop curves are based on a dense packed bed of activated carbon. • Please consult your TIGG representative for N-5000, N-8000 and N-12000 spec sheets.

Transcript of Nixtox Vapor Phase Radial Adsorber Activated Carbon

Page 1: Nixtox Vapor Phase Radial Adsorber Activated Carbon

Modular Activated Carbon Vapor Phase AdsorbersSolutions for Vapor Phase Remediation & Industrial Emission Control

NIXTOX Radial Flow Adsorbers

NIXTOX Radial Flow activated carbon adsorbers are designed for industrial emissions control and environmental remediation when relatively high

flow rates require a low pressure drop.

The activated carbon is contained in an annulus between two stainless steel screens attached to expanded metal. These activated carbon adsorption systems can be used with or without an Accumulator Cabinet.

When an Accumulator Cabinet is used to house the radial flow activated carbon adsorber, condensate drains and breakthrough indicators are provided. Model numbers reflect the design flow for most vapor phase environmental remediation applications.

Model # Nominal Flow (CFM)

MaxTemp

Max Pressure (PSIG)

Diameter/Height (IN)

Standard Fill (LBS)

Shipping Weight

N-500 500 150 OPEN 24/42 200 360N-1000 1,000 150 OPEN 31/47 400 620N-1500 1,500 150 OPEN 31/.47 300 540N-3000 3,000 150 OPEN 46/75 1,600 2,200

Call a TIGG Representative Today at 800-925-0011

03/14

IGGT 800-925-0011www.TIGGtanks.com

www.TIGG.com

TIGG Corporation1 Willow AvenueOakdale, PA 15071

Purifying Air & Water

http://www.tigg.com/Radial-Flow.html

Modular Activated Carbon Vapor Adsorber Drums

NOTES:

• Nominal flow may be conservative. Desired contact time may allow higher or lower flow rates.

• Dry virgin activated or reactivated carbon provided as standard adsorbent.• Adsorbent fill is based on a bed density of 27 lb/ft3.• Adsorbent fill can differ based on variable bed density and alternate adsorbents.• Pressure drop curves are based on a dense packed bed of activated carbon.• Please consult your TIGG representative for N-5000, N-8000 and N-12000 spec sheets.