NISP-RP-12 Training and Qualification of …...Nuclear Industry Standard Process Training and...

50
Training and Qualification of Supplemental RP Technicians NISP-RP-12 Revision: 1.0 Effective Date: December 11, 2017 This is an industry document for standardizing radiation protection processes used by supplemental radiation protection technicians. Standard processes and requirements are established to eliminate site-specific radiation protection training for supplemental radiation protection technicians and supervisors. The Institute for Nuclear Power Operations (INPO) maintains current procedures for standard processes on the INPO website and has approval authority for revisions. INPO approval authority is granted by the industry contingent on a structured review and approval process by representatives of utility radiation protection organizations. NUCLEAR INDUSTRY STANDARD PROCESS Radiological Protection

Transcript of NISP-RP-12 Training and Qualification of …...Nuclear Industry Standard Process Training and...

TrainingandQualificationofSupplementalRPTechniciansNISP-RP-12

Revision:1.0EffectiveDate:December11,2017Thisisanindustrydocumentforstandardizingradiationprotectionprocessesusedbysupplementalradiationprotectiontechnicians.Standardprocessesandrequirementsareestablishedtoeliminatesite-specificradiationprotectiontrainingforsupplementalradiationprotectiontechniciansandsupervisors.TheInstituteforNuclearPowerOperations(INPO)maintainscurrentproceduresforstandardprocessesontheINPOwebsiteandhasapprovalauthorityforrevisions.INPOapprovalauthorityisgrantedbytheindustrycontingentonastructuredreviewandapprovalprocessbyrepresentativesofutilityradiationprotectionorganizations.

NUCLEARINDUSTRYSTANDARDPROCESSRadiologicalProtection

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

TableofContents1.0 Introduction.....................................................................................................................................1

1.1 Purpose........................................................................................................................................1

1.2 ScopeandApplicability................................................................................................................1

2.0 GeneralRequirements.....................................................................................................................5

3.0 ProcessInstructions.........................................................................................................................7

3.1 IndustryTrainingOversightCommittee(ITOC)............................................................................7

3.2 KnowledgeExamsforInitialTraining...........................................................................................8

3.3 PerformanceEvaluationsforInitialTraining...............................................................................9

3.4 EquivalencyEvaluations.............................................................................................................10

3.5 PositionQualifications...............................................................................................................11

3.6 UnacceptablePerformance.......................................................................................................12

3.7 TrainingFeedback......................................................................................................................13

3.8 ContinuingTraining....................................................................................................................14

4.0 ClarifyingNotes.............................................................................................................................16

5.0 References.....................................................................................................................................16

6.0 RevisionSummary.........................................................................................................................16

Attachment1:TrainingProgramDescription..........................................................................................19

Attachment2:PADSCodesforCIRPTaskQualifications.........................................................................37

Attachment3:EquivalencyofNEIRPTSkillstoCIRPTaskQualifications................................................38

Attachment4:SupplierTrainingEquivalencyEvaluation........................................................................41

Attachment5:CreditedExperienceforANSIQualification.....................................................................42

Attachment6:TrainingFeedback–Sample............................................................................................43

Attachment7:PADSTransitionPlan.......................................................................................................44

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page1of48

1.0 Introduction

1.1 Purpose

ThisproceduredescribestheprocessfortrainingandqualifyingsupplementalRPtechnicianstoperformCommonIndustryRPTasks(CIRPTasks)andtomaintainCIRPTaskqualificationsforportabilityamongnuclearsites.CIRPTaskqualificationsarerequiredbeginninginJanuary2018toimplementNuclearIndustryStandardProcesses(NISP)thatwillalsobeeffectiveinJanuary2018.

ThisprocedurealsodescribeshowanIndustryTrainingOversightCommittee(ITOC)willbeusedtoconsistentlyapplythisprogramacrosstheindustry.

1.2 ScopeandApplicability

WhatisaCIRPTask?

ACIRPTaskdefinesascopeofwork,asdescribedinAttachment1,forwhichasupplementaltechnicianmustbetrainedandqualified.ThescopeofworkdefinedineachCIRPTaskisalignedwiththeinstructionsprovidedinNISP-RP-01throughNISP-RP-10asfollows:

• EachNISPspecifiesthetasksrequiredtoaccomplishthescopeandpurposeoftheNISPandprovidesinstructionsforeachtask.

• ACIRPTasknumberofRP2.XXdefinesthescopeofworkthatcanbeperformedbyaqualifiedJuniorTechnician.

• ACIRPTasknumberofRP3.XXdefinesthescopeofworkthatcanbeperformedonlybyaqualifiedSeniorTechnician.

• TheXXintheCIRPTasknumberreferstotheNISPnumberthatprovidestheinstructionstoperformthescopeofworkspecifiedbytheCIRPTask.Forexample,RP2.05definesthescopeofworkthataJuniorTechniciancanperforminimplementingNISP-RP-05,AccessControlsforHighRadiationAreas;RP3.05definesthescopeofworkthatonlyaSeniorTechniciancanperform.

HowistheSystematicApproachtoTrainingapplied?

TheSystematicApproachtoTraining(SAT)isappliedusingtheformsandchecklistsestablishedbyEPRItosupportStandardizedTaskEvaluations(STE)asdescribedinReference5.4.TheEPRIwebsiteisusedtomaintainthefinalversionsoftheSATproducts.SATproductsforeachCIRPTaskincludethefollowing:

• ATaskAnalysisliststheapplicabletasksandelementsfromtheNISPwiththefollowing:! Performancestandards! Criticalsteps! Knowledgerequirements! Skillrequirements! Cognitiveenablingobjectives! Performanceenablingobjectives

• ATaskObjectiveFormspecifiesthefollowing:! Cognitivelevelrequirements(knowledge,comprehension,orapplication)andthenumber

ofquestionsrequiredforevaluationofeachcognitiveenablingobjectiveona25questionknowledgeexam.

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page2of48

! Evaluationmethods(simulateorperform)thatmaybeusedforeachperformanceenablingobjective.

• AknowledgeexaminationmaybedownloadedortakendirectlyontheEPRIwebsite.• Aperformanceevaluationcanbedownloadedandusedtoevaluateanddocumentifatrainee

passesorfailseachperformanceobjective.Theadministrativeprocessforevaluationisalsoincludedinthedownloadeddocument.

SATproductsthatarenotdevelopedundertheEPRISTEprocessbutmaintainedontheEPRIwebsiteforusebytheindustryincludethefollowing:

• APowerPointlessonplanmaybedownloadedtoprovidethetrainingneededtoachievethecognitiveenablingobjectives.

• AnIncumbentEvaluationprovidesagapanalysisbetweenCIRPTasksandtheNEISkillsdescribedinReference5.6toidentifythegaptrainingneededtoequateandtransferNEISkillqualificationstoCIRPTaskqualifications.

Howwillpositionqualificationsbedefined?

PositionqualificationswillbemaintainedinPADSbeginningin2018usingthefollowingcriteria:

• SeniorANSI3.1Technician:AllCIRPTaskqualificationshavebeengranted,ANSI3.1experiencerequirementshavebeenmet,andcontinuingtrainingrequirementshavebeenmet.

• SeniorANSI18.1Technician:AllCIRPTaskqualificationshavebeengranted,ANSI18.1experiencerequirementshavebeenmet,andcontinuingtrainingrequirementshavebeenmet.

• JuniorTechnician:AlljuniorlevelCIRPTaskqualificationshavebeengrantedandcontinuingtrainingrequirementshavebeenmet.

• TaskOnlyTechnician:OnlyaportionofjuniorlevelCIRPTaskqualificationshavebeengranted.

Beginningin2018,Attachment5willbeusedtodeterminehowexperiencewillbeevaluatedandcreditedtowardsANSIqualificationsiftheexperiencedidnotinvolveradiologicalsurveillanceandcontrolofareasandworkinanuclearpowerplant.Theadoptionofstandardcriteriawillnotchangeatechnician’sANSIqualificationstatusaspreviouslydeterminedbyautility.ThestandardcriteriaareapplicabletoANSIexperienceevaluationsbeginninginJanuary2018.

In2018,thecontinuingtrainingcourseforNISPgaptrainingmustbecompletedtoattainanyCIRPTaskqualificationusingAttachment3regardlessofposition.Beginningin2019,annualcontinuingtrainingmustbecompletedbySeniorTechniciansandJuniorTechnicianstomaintainpositionqualification.ThePADSreportsdescribedinReference5.9willshow“suspended”or“notcurrent”forpositionqualificationsandseniorlevelCIRPTaskqualificationsforthefollowingconditions:

• During2020,aSeniorTechnicianorJuniorTechnicianhasnotcompletedthecontinuingtrainingcourseprovidedduring2019.

• During2021,aSeniorTechnicianorJuniorTechnicianhasnotcompletedthecontinuingtrainingcourseprovidedduring2019or2020.

Qualificationsmaybereinstatedbycompletingthepastcontinuingtrainingcoursesthatweremissedunless;beginningin2022,atechnicianhasnotcompletedanyofthecontinuingtrainingprovidedduringthepreviousthreecalendaryears.Insuchcases,thetechnicianmustcompleteinitialtrainingfortaskqualificationasdescribedinthisprocedure.

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page3of48

HowwilltransitiontoCIRPTaskqualificationsbeaccomplished?

TaskperformanceevaluationsusingtheNEISkillswillnolongerbeadministeredafter2017.Beginningin2018,initialtaskqualificationwillbeaccomplishedusingtheEPRISTEprocess.TechnicianswillbegrantedequivalencyforpreviouslycompletedNEISkillstotransferprevioustrainingtoCIRPTaskqualificationsasshowninAttachment3.After2018,equivalencyforNEISkillswillnolongerbegranted.

GaptrainingwillbeprovidedtoSeniorTechnicians,JuniorTechnicians,andTaskOnlyTechnicianstobridgetheknowledgeandskilldifferencesbetweentheNEISkillsandCIRPTasks.Oncethegaptrainingiscompleted,aCIRPTaskqualificationmaybegrantedbasedonpreviouslycompletedNEISkillsasshowninAttachment3.ThePADSreportsdescribedinReference5.9willnotshowCIRPTaskqualificationsunlessthegaptrainingiscompleted.TheTaskqualificationsgrantedbyautility-specifictrainingprogramforworkwithinthequalifyingutilityarenotaffected.

Whataretherequirementsforknowledgeoffundamentals?

AjuniorlevelfundamentalscoursemustbecompletedasaprerequisitetoinitiallyqualifyforjuniorlevelCIRPTasksbeginningin2018.AseniorfundamentalscoursemustbesuccessfullycompletedasaprerequisitetoinitiallyqualifyforseniorlevelCIRPTasks.BothfundamentalscoursesareadministeredusingNANTeLandrequirean80%passinggrade.IncumbentsarenotrequiredtocompleteeitherfundamentalscourseiftheyhavecompletedthefundamentalstrainingdescribedinReference5.6(alsoreferredtoastheNUFexam)withinthepreviousfive(5)years.

JuniorTechniciansandTaskOnlyTechnicianswhowerequalifiedtoperformjuniorleveltaskspriorto2018withoutcompletingtheNUFexamwillcontinuetobequalifiedtoperformtheequivalentCIRPTaskswiththefollowingrestrictions:

• Thejuniorfundamentalscoursemustbesuccessfullycompletedbytheendof2018.• AdditionalCIRPTaskqualificationsmaynotbegranteduntilthejuniorfundamentalscoursehas

beensuccessfullycompleted.

ThecurrentrequirementforSeniorTechnicianstocompletethefundamentalstrainingdescribedbyReference5.6(NUFexam)everyfive(5)yearswillbesuspendedbeginninginJanuary2018.Instead,annualcontinuingtrainingcourseswillincluderefreshertrainingonfundamentalsatthediscretionoftheITOC.

WhomayadministertheEPRISTEprocess?

BeginninginJanuary2018,suppliersandutilitiesmayusetheEPRISTEprocessdescribedbyReference5.4toqualifytechnicianstoperformCIRPTasks.TousetheSTEprocess,asuppliermustbedeemedbytheEPRISTESteeringCommitteetobeAP3compliant;thesupplier’sprogrammustcontaintheattributesdescribedinReference5.2.Requiredattributesarespecifiedforworkers,evaluators,theevaluationsite,evaluationadministration,andprogramimprovements.EPRImemberutilityprogramsaccreditedbytheNationalAcademyforNuclearTrainingmayalsoadministeranSTE.EPRImembershipisrequiredtoaccesstheknowledgeexaminationsandperformanceevaluationsmaintainedontheEPRIwebsite.MemberutilitiesandAP3compliantsuppliersarerequiredtosubmitrecordstoEPRIforupdateoftheEPRITaskQualification/CompletionRegistry(TQR).

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page4of48

Howwilltrainingequivalencybeevaluated?

CreditmaybegivenfortrainingprovidedbyentitiesexternaltotheUSnuclearpowerindustrysuchasavocationalcollege,theDepartmentofEnergy,oraforeignutility.Attachment4maybeusedbysupplierstodocumentthebasisforequivalencyincreditingacourseorperformanceevaluationrequiredforaCIRPTaskqualification.Utilitiesmaydocumentequivalencyusingsite-specificprocedures.Additionalrequirementsandrestrictionsforgrantinganequivalencyincludethefollowing:

• TosuccessfullycompleteanSTE,boththeknowledgeexamandtheperformanceevaluationmustbecompletedusingtheEPRIprocess.AnequivalencymaynotbeappliedtosatisfyeitherpartofanSTE.

• TheITOCshallapprove,byname,supplieremployeeswhomayperformanequivalencyevaluation.

• EquivalencyevaluationsperformedbyasuppliermustbeapprovedbytheITOC.

HowwillCIRPTaskqualificationsbetracked?

PADSwillcontinuetobeusedasthemasterdatabasetoshowqualificationsofsupplementaltechnicians.APADSTransitionPlanisprovidedinAttachment7toaccomplishthefollowing:

• ProvideinstructionstoautilitytoinputNEISkillsgrantedbytheutilityintoPADS.• ProvideinstructionsforautilitytosetupCIRPTaskqualificationsintheirLMSbasedonthe

equivalenceofNEISkills.• Whenfeasible,establishanautomaticinterfacebetweentheutilityLearningManagementSystem

(LMS)andPADSthatwillensurebothdatabasesreflectthecurrentqualificationstatus.

SuppliersandutilitiesthatdonothaveanautomaticLMS/PADSinterfacemayinputdirectlyinPADSandusethePADSreportsshowninAttachment7.

HowarerecordsmaintainedtosupportCIRPTaskQualifications?

TheorganizationmakingaPADSentryshallretainsupportingqualityrecordsandmakethemavailableonrequest.RecordssupportingPADSentriesaremaintainedasfollows:

• Utilitiesmaintainrecordsperutilityprocedures.• NANTeLprovidesanelectronicrecordforcompletionoffundamentalsexams.• NANTeLprovidesanelectronicrecordforcompletionofcontinuingtrainingcoursesandrequired

exams.• TheEPRITQRprovidesanelectronicrecordforcompletingSTEknowledgeexamsandperformance

evaluations.• SuppliersretainresumesandequivalencyevaluationsusingAttachment4.• SuppliersretainattendancesheetsforcontinuingtrainingbymethodsotherthanNANTeL.

Howwillcontinuingtrainingbeadministered?ContinuingtrainingwillbeprovidedtomaintaintheknowledgeandskillsrequiredtoimplementtheNISPs.ThecontentofcontinuingtrainingwillbethesameforbothSeniorandJuniorTechnicians.Requiredexamsrequireapassinggradeof80%.Continuingtrainingfor2018isscheduledtobegininDecember2017andwillconsistofthegaptrainingtoimplementtheNISPs.After2018,minimumrequirementsforannualcontinuingtraininginclude:

• SignificantchangesinanNISP.

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page5of48

• Anygaptrainingneededduetosignificantchangesintheinitialtrainingprogram.• LessonslearnedfromsignificantoperatingexperienceasidentifiedbyINPO.• INPOfocusareasbasedonweaknessesidentifiedduringINPOplantperformanceevaluations.• Refreshertrainingforfundamentals/systemsasdeterminedbytheITOC.• Annualcontinuingtrainingshouldnotexceed16hoursperyearofdisciplinespecifictraining.

Deliveryofcontinuingtrainingwillbeaccomplishedusingcomputerbasedtraining(CBT)tothemaximumextentreasonable.IfaportionofthecontinuingtrainingcannotbedeliveredusingCBT,theITOCisresponsiblefordetermininghowthetrainingwillbedelivered.Continuingtrainingdoesnotincluderefreshertrainingforinfrequent,important,andcomplextasksduetothelargepopulationofsupplementaltechniciansthatdonotperformsuchtasks.Whensuchtaskswillbeperformed,theutilityisresponsiblefordeterminingthepre-jobtrainingand/orbriefingthatwillberequiredusingplant-specificprocedures.

Howwillindustryoversightbeestablished?TheUSnuclearpowerindustryhascollaboratedtodevelopandimplementtheaboveprogramthroughaworkinggroup.TheworkinggroupwilltransformintotheITOCtoprovidearepresentativecross-sectionofstakeholdersthatwillmonitorandmaintaintheeffectivenessofthetrainingprogram.

2.0 GeneralRequirements

2.1 SupplierprogramstoqualifypersonnelusingtheSTEprocessshallbeevaluatedandapprovedperReference5.2,EPRIAdministrativeProtocolforPortablePracticals(AP3)inStandardizedTaskEvaluations.Reference5.2describesthefollowing:

2.1.1 Thekeyattributesthatmustbesatisfiedinthesuppliertrainingprogram.2.1.2 Theprocessforprogramsubmittalandcompliancereview.2.1.3 Requirementsformaintaininganapprovedprogram.

2.2 AdministrationofknowledgeexaminationsandperformanceevaluationsbysuppliersshallconformtotheprocessesdescribedinReference5.4,EPRIStandardizedTaskEvaluationProgramImplementationGuide.

2.3 QualificationofasupplementalRPtechniciantoperformaCIRPTaskisaccomplishedbyoneofthefollowing:

2.3.1 AnEPRISTEfortheCIRPTaskmaybeadministeredbyanEPRIAP3compliantsupplierorthroughaprogramaccreditedbytheNationalAcademyforNuclearTraining.a. KnowledgeexaminationsandperformanceevaluationsontheEPRIwebsiteare

availableonlytoutilitiesandsupplierswithanEPRImembership.2.3.2 Anequivalencyisgrantedusingtheprovisionsofsections3.4.1,3.4.2,or3.4.4.

2.4 EnablingobjectivestoachievequalificationforperformingCIRPTasksshallincludethefollowing:

2.4.1 ApplicabletopicsfromACAD93-008listedinAttachment1.2.4.2 ProcessspecificknowledgeandskillsasdeterminedthroughtheCIRPTaskAnalysis.

2.5 SupplieremployeesshallbeapprovedbytheITOCtoperformthefollowing:

2.5.1 Reviewandapproveequivalencyevaluations.

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page6of48

2.5.2 EvaluatepreviousexperienceforapplicabilitytoANSIrequirements.2.5.3 Evaluateandremediateunacceptableperformance.

2.6 Completedcourses,CIRPTaskqualifications,andpositionqualificationsshallbeenteredintothePersonnelAccessDataSystem(PADS)withthefollowingminimuminformation:

2.6.1 CourseName–ThespecificcoursenumberorqualificationaslistedonAttachment2.2.6.2 DateCompleted–Enterthecompletiondateforthetypeofdataentryusingthe

followingguidance:a. STECompletion:EnterthedatewhentheSTEwascompleted.b. TransferofNEISkills:Enterthedatewhenitwasdeterminedthat,foraCIRPTask,

theNEISkillslistedinAttachment3havebeenpreviouslycompleted.Theentrydateforcompletinggaptrainingwillbeenteredseparately.

c. CompletionofRPFUN1orRPFUN2:Enterthedatewheneachcoursewascompleted.CompletiondatesforthefundamentalstrainingdescribedbyReference5.6arealreadyinPADS.

d. EquivalencyEvaluation:EnterthedatewhenitwasdeterminedandapprovedthataCIRPTaskqualificationhasbeenmetthroughanequivalencyevaluation.

e. ANSI18.1or3.1PositionQualifications:Enterthedatewhenthereviewwascompletedpersection3.5ofthisprocedure.

2.6.3 Score–PASSorNLQF(NoLongerQualified).a. ACIRPTaskqualificationorpositionqualificationwiththecodeNLQFidentifiesa

suspendedqualificationduetounacceptableperformanceorotherreasons.1) Onceremediationhasbeencompleted,thecourseorpositionqualification

maybeenteredwithascoreofPASStorestorethequalification.2.6.4 Method–InputPERFORMANCEforthecodesonAttachment2.2.6.5 Plant–ThePADSplantcodeorcompanycodeforthefacilityconductingthetrainingor

performingthereview.

2.7 RefertoNEI03-05(Reference5.8)foradditionaldataentryinstructionsasneeded.

2.8 During2020and2021,ifaJuniororSeniorTechnicianhasfailedtocompleteanannualcontinuingtrainingcourseprovidedsince2019,remediationshallbeperformedasfollows:

2.8.1 CompletetheCBTcoursesthatweremissed.2.8.2 Fornon-CBTcourses,ensuretheseniortechniciancanperformconsistentwiththe

enablingobjectivesthroughperformanceevaluation,observation,oralboards,etc.DocumenttheequivalencyevaluationusingAttachment4(suppliersonly)orsite-specificproceduresforequivalencyevaluations(utilityonly).

2.9 Beginningin2022,ifaJuniororSeniorTechnicianhasfailedtocompleteannualcontinuingtrainingcoursesprovidedduringthepreviousthree(3)calendaryears,taskqualificationmustbeaccomplishedusingtheSTEprocessdescribedinthisprocedure.

2.10 RecordstosupportPADSentriesaremaintainedasfollows:

2.10.1 Utilitiesretainrecordspersite-specificprocedures.

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page7of48

2.10.2 NANTeLmaintainselectronicrecordstoshowindividualcompletionofRPfundamentalsknowledgeexamsusingNANTeL.

2.10.3 EPRImaintainsanelectronicrecordshowingsuccessfulcompletionofanSTEknowledgeexamintheEPRITaskQualification/CompletionRegistry(TQR).

2.10.4 EPRImaintainsanelectronicrecordtoshowindividualcompletionofanSTEperformanceevaluationintheEPRITQRperEPRIpolicy.

2.10.5 TheutilityorsupplieradministeringanSTEisresponsibleforupdatingPADSandprovidingEPRIwiththedocumentsrequiredforupdateoftheTQR.

2.10.6 SuppliersmaintainrecordsofequivalencyevaluationsandresumestosupportANSIqualificationsindefinitelyoruntildisposalisauthorizedbytheITOC.

2.10.7 NANTeLmaintainselectronicrecordstoshowindividualcompletionofcontinuingtraining,includecompletionofrequiredexams.

2.10.8 SuppliersmaintainattendancerecordsforcontinuingtrainingthatisnotdeliveredusingNANTeL.

3.0 ProcessInstructionsThefollowingillustrationliststhemajorprocesselementsinthisprocedurethatimplementasystemsapproachtotraining.

3.1 IndustryTrainingOversightCommittee(ITOC)

Performer Action

INPO 3.1.1 CoordinatewiththeindustrytoassignanITOCChair.

Analysis Design Development Implement Evaluate

• ApplicableTopicsfromACAD93-008DefineKnowledge&SkillsCommensuratewithTrainingofUtilityTechnicians(Attachment1)

• TaskAnalysisIdentifiesAdditionalKnowledge&SkillRequirementsSpecifictoNISPProcesses

• EntryLevelRequirementsEstablished

• CognitiveEnablingObjectivesforFundamentalsEstablishedbasedonACAD93-008

• STEProcessEstablishes:1. Cognitive

EnablingObjectives

2. PerformanceEnablingObjectives

3. KnowledgeExams

4. PerformanceEvaluationStandards

• FundamentalsCoursesDevelopedforWebBasedAccess

• CoursesDevelopedforWebBasedAccesstoSupportKnowledgeExams

• PerformanceEvaluationMethodology&AcceptanceStandardsDevelopedusingSTEProcess

• WebBasedCoursesUsedtoFacilitateSelf-PacedTraining

• WirelessTechnologyUsedtoSimulateRadiationLevels

• LessonPlansProvideConsistentDelivery

• TaskPerformanceEvaluationsSpecifyPerformanceStandards

• TrainingOversightCommittee(ITOC)Established

• UnacceptablePerformanceReported&Evaluated

• TrainingFeedbackSolicited&Collected

• AnnualITOCReviewDeterminesTrainingActionstoImprove&SustainPerformance

• ITOCCoordinatesTrainingActions

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page8of48

ITOCChair 3.1.2 CoordinatewiththeindustrytoselectmemberstotheITOCasfollows:a. ITOCChair(votingmember).b. TwocorporateRPMs(votingmembers).c. TwotrainersresponsibleforRPtrainingprograms(votingmembers).d. TwositeRPMs(votingmembers).e. ArepresentativefromeachAP3compliantsupplieradministeringSTEs

(votingmembers).f. INPOrepresentative(non-votingmember).g. EPRIrepresentative(non-votingmember).

3.1.3 Selectmemberstoachievearepresentativecross-sectionoftheindustry.3.1.4 EnsureITOCmeetingsmaintaintheminimumquorumasstatedaboveforissues

requiringavote.Amajorityvoteisrequiredforapprovalofactionsanddecisions.

ITOC 3.1.5 Reviewtheeffectivenessinimplementingthisprocedureatleastannuallyandcoordinateimprovementactionsthatmaybeidentified.

3.1.6 Provideroutineoversightofthetrainingprogramtoensurethefollowing:a. InclusionoftrainingtopicsfromACAD93-008thatprovidetheknowledge

andskillsnecessarytoperformthetasksincludedinportablequalifications.b. Theuseofwebbasedtrainingcoursestotheextentpracticable.c. AneffectiveinterfacebetweenPADSandsiteLMSprogramstotrackand

updateCIRPTaskqualifications.d. IdentificationoftrainingneedstoimplementneworrevisedNISPs.e. Implementationofaperformancemonitoringprogramtoidentifypotential

improvementsneededintraining.f. Identificationoftrainingneedsbasedonperformancemonitoringand

recentoperatingexperience.g. ImplementationoftrainingneedsidentifiedduringITOCreviews.

3.1.7 ReviewtheapplicabletopicslistedinAttachment1every3to5yearstoensuretrainingrequirementsmeettheindustry’sneeds.a. RevisethisNISPasrequiredtomaintainAttachment1current.

3.1.8 Conductmeetingsasneededtodeterminecontinuingtrainingrequirements(referencestep3.8.1).

3.2 KnowledgeExamsforInitialTraining

Performer Action

Proctor 3.2.1 AdministerRPTheoryFundamentalsexams(FPFUN1andRPFUN2)usingNANTeL.a. UpdatePADSforsuccessfulexamcompletioneitherdirectlyorthrough

interfacewithanupdatedLMSandautomaticinterface.

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page9of48

NOTESATproducts from the EPRIwebsite arenot available tonon-EPRImembers andmaynotbeusedtoadministeranSTE.

3.2.2 AdministerSTEknowledgeexamsperReference5.4usingtheEPRIwebsiteoradministermanuallyasdescribedbelow.

3.2.3 IfanSTEknowledgeexamistobeadministeredmanually,thentakethefollowingsteps:a. DownloadtheSTEknowledgeexamfromtheEPRIwebsite.b. Administertheknowledgeexaminaccordancewiththeinstructionsonthe

knowledgeexamandthesitetrainingprocedures.3.2.4 ForwardthecompletionformtotheEPRI/PADSPointofContactestablishedby

thesiteorsupplier.

EPRI/PADSPointofContact

3.2.5 IfallrequirementshavebeensatisfiedtocompleteaCIRPTaskqualification,updatePADSdirectlyorthroughinterfacewithasiteLearningManagementSystem(LMS).

3.2.6 Formanualexams,forwardthecoversheettotheEPRISTECoordinatorforretention.

EPRISTECoordinator

3.2.7 UpdatetheEPRITaskQualification/CompletionRegistry(TQR)uponreceiptofanexamcoversheet.

3.3 PerformanceEvaluationsforInitialTraining

Performer Action

NOTESATproductsfromtheEPRIwebsitearenotavailabletonon-EPRImembersandmaynotbeusedtoadministeranSTE.

Evaluator 3.3.1 ObtaintheperformanceevaluationdocumentbydownloadingtheSTE

documentfromtheEPRIwebsiteperReference5.4.3.3.2 Evaluateeachperformanceobjectivebyhavingthetraineeperformorsimulate

thestepsrequiredtoaccomplisheachobjective.a. Performrequiresactualperformanceofthestepsusingthenecessary

processes,tools,andequipment.b. Stepsmaybeperformedinanon-radiologicalenvironmentifthefollowing

criteriaaremet:1) Wirelesstechnologyisusedfordynamicmeasurements,e.g.radiation

levelschangebasedonthesurveyor’slocationorradiationlevels

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page10of48

changeduetoprogressionthroughascenario.2) Cuesareusedonlyforstaticmeasurements,e.g.afriskerreadingona

smearortheamountofradioactivityonanairsample.3) Simulatortrainingplansareusedtosetupthesimulatedenvironment,

directchangesinwirelessparametersbasedonthescenariopresented,specifytheexactcuesthatmaybeprovided,andspecifywhenthecuesmaybeprovided.

c. Iftheperformanceobjectivecannotbereasonablyperformed,theobjectivemaybesimulated.1) Simulationrequiresthetraineetoperformthestepsinarepresentative

mannerusingsimilarprocesses,tools,andequipment.3.3.3 Ifthetraineesuccessfullydemonstratesalloftheperformanceobjectives,

completethedocumentationasinstructedbytheSTEandsendthecompleteddocumentationtotheEPRI/PADSPointofContactestablishedbythesiteorsupplier.

EPRI/PADSPointofContact

3.3.4 IfallrequirementshavebeensatisfiedtocompleteaCIRPTaskqualification,updatePADSdirectlyorthroughinterfacewithasiteLearningManagementSystem(LMS).

3.3.5 ForwardthecompletedcoversheettotheEPRISTECoordinator.

EPRISTECoordinator

3.3.6 UpdatetheEPRITaskQualification/CompletionRegistry(TQR).

3.4 EquivalencyEvaluations

Performer Action

Utilities 3.4.1 CreditthefollowingqualificationsandcoursesasbeingequivalenttotheCIRPTaskqualificationrequirementsinAttachment1.a. RPFundamentals(PADSCodes2023&5261)meettherequirementforboth

ofthefollowing:1) RPTheoryFundamentalsforJuniorTaskQualifications.2) RPTheoryFundamentalsforSeniorTaskQualifications.

b. NEISkillsfromNEI03-04(Reference5.6)meettherequirementsforCIRPTaskqualificationsaslistedinAttachment3.

3.4.2 Usesite-specificprocedurestoevaluateandcreditsitecoursesandTaskPerformanceEvaluationsthataccomplishtheenablingobjectivesforallorportionsofthefollowing:a. RPTheoryFundamentalsforJuniorTaskQualifications.b. RPTheoryFundamentalsforSeniorTaskQualifications.c. CIRPTaskAnalysis.d. RPContinuingTrainingforthecurrentyear.

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page11of48

3.4.3 UpdatePADSdirectlyorthroughinterfacewiththesiteLMStoaddqualificationsgrantedbyanequivalencyevaluation.a. ThePADSdatabasewillreflectthattheutilityprovidingtheupdate

maintainstherecordssupportingthequalification.b. ThedateforcompletingtheequivalencyevaluationwillbethePADS

completiondateforthecourseorqualification.

Suppliers 3.4.4 UseAttachment4toevaluateandcreditcoursesandqualificationsthatmeettheenablingobjectivesforthecoursesandqualificationslistedinAttachment1.a. RetainAttachment4asarecorduntilthetechnicianisnolongeravailable

toworkasasupplementalRPtechnician.b. ThedateforcompletingtheequivalencyevaluationwillbethePADS

completiondateforthecourseorqualification.c. Ensureequivalencyevaluationsarereviewedandapprovedonlyby

individualswhohavebeenauthorizedbytheITOCasdocumentedinITOCmeetingminutes.

3.5 PositionQualifications

Performer Action

Utilities&Suppliers

3.5.1 UseAttachment5toevaluatepreviousexperienceforcomparisontoANSIrequirements.a. ANSI18.1requirementsaremetiftheexperienceevaluationshowstwoor

moreyearsofexperience(4,000hours)canbecreditedtowardANSIqualifications.

b. ANSI3.1requirementsaremetiftheexperienceevaluationshowsthreeormoreyears(6,000hours)ofexperiencecanbecreditedtowardANSIqualifications.1) RelatedtechnicaltrainingmaybesubstitutedasexperienceforANSI3.1

qualificationsbasedon40hoursperweek,nottoexceed2,000hours.c. CompletionofAttachment5isnotrequiredifatechnician’sresumeshows

ANSIrequirementshavebeensolelymetbyexperienceasaJuniororSeniorRPtechnicianatanuclearpowerplantprovidingradiologicalsurveillanceandcontrolofareasandwork.

3.5.2 EnsureonlydesignatedapprovalauthoritiesaslistedbelowreviewandapproveacompletedAttachment5.a. AsiteRPMordesignatedapprovalauthority.b. AsupplieremployeeapprovedbytheITOC.

3.5.3 EnsurethePADSdatabasereflectsthepositionexperiencelevelsasfollows:a. InputcompleteforPADScodeAN18.1ifANSI18.1experiencerequirements

aremet.b. InputcompleteforPADScodeAN3.1ifANSI3.1experiencerequirements

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page12of48

aremet.c. InputcompleteforPADScodeJRTECHwhentheJuniorTechnicianposition

qualificationhasbeenattainedorwhenanevaluationhasdeterminedthattheprerequisiteshavebeenmet.

d. RetaintheresumeonfileastherecordholderfortheexperienceevaluationuntiltheindividualisnolongeravailabletoworkasasupplementalRPtechnician.

3.5.4 IfatechnicianwaspreviouslydeterminedtomeetANSIqualificationsusingplant-specificcriteriapriortoJanuary1,2018anddoesnotmeetthestandardcriteriainAttachment5onJanuary1,2018,theplantawardingtheANSIqualificationmayentertheindividualinPADSasANSIqualified.

3.6 UnacceptablePerformance

Performer Action

SiteRPMorSupplier

3.6.1 IfanRPtechniciandoesnotperformaCIRPTaskatanacceptablelevel,suspendqualificationsforperformingtheapplicabletask(s).a. Unacceptableperformanceisdefinedasanincidentwhenatechnician’s

performancerequiresCIRPTaskqualificationstobesuspendedasdeterminedbythesiteRPM.

b. EnsureboththesiteRPMandthetechnician’smanagementisawareofthecircumstancesrelatedtotheunacceptableperformance.

Supplier 3.6.2 AssignaSupplierIssueOwnerforeachcaseinvolvingtheevaluationand/orremediationofunacceptableperformance.a. EnsuretheSupplierIssueOwnerhasbeenapprovedbytheITOCto

evaluatetechnicianperformanceissues.b. EnsureapprovalisdocumentedinITOCmeetingminutes.

SupplierSiteManager

3.6.3 Uponnotificationofunacceptableperformance,promptlytakethefollowingactions:a. Communicatetheissuethroughthesupplier’schainofcommand.b. Ensuretheissueisenteredinthesupplier’scorrectiveactionprogram.

1) Updatethesupplier’scorrectiveactionprogramassitemanagementcompletesanyrelatedinvestigationstoensurethesupplier’smanagementhasarchivedreferencetositeinvestigations.

c. Interviewthetechniciantoinvestigatepotentialcauses,includingpotentialknowledgeorskillweaknesses.1) Ensureinterviewsaredocumentedandenteredinthesupplier’s

correctiveactionprogram.d. Ifthetechnicianisreleasedfromthesitewithoutremediation,notifythe

SupplierIssueOwnertoensuretheaffectedCIRPTaskqualificationsare

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page13of48

suspendedinPADS.1) EntersuspensionofPADSqualificationsasanassignedactioninthe

supplier’scorrectiveactionprogramtodocumentcompletion.2) SuspendaqualificationbyenteringNLQFastheinputforthescoreas

describedinsection2.6.3ofthisprocedure.e. ContacttheSupplierIssueOwnertodetermineifadditionalinformationor

evaluationisneeded.

SupplierIssueOwner

3.6.4 InformtheEPRISTECoordinatorthatunacceptableperformanceofanSTEhasoccurred.

3.6.5 Ifremediationcanbereasonablyachieved,determinetheremediationactionsrequiredtoreinstatetheaffectedqualifications.a. ConsultwiththesiteRPMtoensureremediationactionsaremutually

acceptable.b. Documenttherequiredremediationactionsinthesupplier’scorrective

actionprogramalongwithconcurrencebythesiteRPM.c. ProvideacopyofthefinalremediationplantothesiteRPM.

3.6.6 Ifeffectiveremediationcannotbereasonablyachieved,documentthebasisforthisconclusioninthesupplier’scorrectiveactionprogram.

3.6.7 Reinstatethetechnician’squalificationsinPADSonlyafterallremediationactionshavebeencompletedandconfidencehasbeenrestoredthatthetechniciancanperformtheSTEtaskwithacceptableperformance.a. Ifthetechnicianchangesemployers,theemployerdesiringreinstatement

isresponsibleforassigninganIssueOwnertooverseeremediation.1) ObtainacopyoftheremediationplanfromtheRPMatthesitewhere

unacceptableperformancewasidentified.b. Documentsuccessfulcompletionofremediationactionsintheemployer’s

correctiveactionprogramwithsupportingobjectiveevidence.3.6.8 UpdatePADStoindicatethatremediationhasbeencompletedandrecordsfor

theremediationareavailablefromtheemployerforreviewasneeded.

EachSupplier

3.6.9 ProvideareporttotheITOCChairbyMay1ofeachyeardescribingeachoccurrenceofunacceptableperformanceandrelatedcorrectiveactionsovertheprevious12months.

3.7 TrainingFeedback

Performer Action

EachSupplier

3.7.1 Designateanindividualresponsibleforcollectingtrainingfeedback.a. Trainingfeedbackontrainingeffectivenessmaybereceivedbytrainees,

observers,andinstructors.Examplesinclude:1) Coursereviews.

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page14of48

2) Critiquesofexamquestions.3) Effectivenessofperformanceevaluations.4) Weaknessesintraineeperformance.5) Strengthsandweaknessesinfacilities,trainingmaterials,andlogistics.

Instructors 3.7.2 EnsuretraineesunderstandthattrainingfeedbackisvaluedandtosubmitfeedbackusingAttachment6oranemail.a. Providethenameoftheindividualdesignatedtocollectfeedbackandask

thatfeedbackbeprovidedtothispersondirectly,orb. Collectfeedbackandforwardittothedesignatedindividual.

EachSupplier

3.7.3 Provideasummaryreport,fromfeedbackovertheprevious12months,totheITOCChairbyMay1ofeachyeardescribingthetrainingfeedbackthatwasreceivedandanyrecommendationsforchangingthetrainingprogramand/orNISPs.

3.8 ContinuingTraining

NOTE:Requiredcontinuingtrainingfor2018willconsistofthegaptrainingrequiredtotransitionNEISkillstoCIRPTaskqualificationsbasedonimplementingtheNISPsinJanuary2018.

Performer Action

ITOCChair 3.8.1 Atleastoncepercalendaryear,normallyduringMay,conductanITOCmeetingtoreviewperformanceandfeedbackfromtheprevious12monthsinaccordancewithsection3.1.

ITOC 3.8.2 Conductanannualperformancereviewusingthefollowinginformation:a. NeworrevisedNISPs.b. Casesofunacceptableperformance.c. Trainingfeedback.d. RecentoperatingexperiencedocumentedinINPOIndustryEventReviews

(IER).e. INPORPfocusareas.

3.8.3 Basedontheannualperformancereview,coordinatedevelopmentofaCBTcoursetoaddressthefollowing:a. NISPchangesthatneedtobecommunicatedtosupplementaltechnicians.b. ChangesintheknowledgeandskillrequirementstoachieveaCIRPTask

qualification.c. Lessonslearnedidentifiedfromsignificantoperatingexperiencethatneed

tobeunderstoodandappliedbysupplementaltechnicians.d. BehaviorsneededtoaddressINPORPfocusareas.e. Refreshertrainingonfundamentalsasneededtoaddressapparent

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page15of48

weaknessesfromtheabovereview.3.8.4 CoordinatetheuseofNANTeLtodistributethecontinuingtrainingCBTto

maximizetheuseofremotelearningandtheflexibilityfortechnicianstocompletethetrainingbasedonpersonalschedules.a. EachsupplierwillassigntheCBTtothejuniorandseniortechnicianswho

haveworkedforthesupplierduringtheprevious18months.3.8.5 IfcompletionofaCBTitselfisnotsufficienttoaccomplishtheenabling

objectivesforcontinuingtraining,determinethefollowingasapplicable:a. Subjectsanddurationsofclassroomorlaboratorytraining.b. Enablingobjectivestobeevaluatedbyaproctoredexamandtheexpected

completiontime.c. Enablingobjectivestobeevaluatedbyaperformanceevaluationor

dynamiclearningactivityandexpectedcompletiontimes.d. Thefacilities,equipment,andinstructorsrequiredfordeliveryofthe

training.e. Divisionofresponsibilitiesbetweenutilitiesandsuppliersfordeliveryofthe

training.3.8.6 CoordinateimplementationoftrainingnotaccomplishedthroughaCBTas

follows:a. AssignmembersoftheIITOCtocoordinatedevelopmentofthetraining

materialsandestablishascheduleforcompletion.b. DeterminethelocationsthatwillbeusedfordeliveryandassignITOC

memberstocoordinatethepreparationoffacilities,equipment,andinstructorsfordeliveryofthetraining.

3.8.7 Coordinaterevisionsofthefundamentalscoursesand/orSATproductsontheEPRIwebsiteasneededtoaddressthetraininggapsidentifiedduringtheannualperformancereview.

3.8.8 Ensurecontinuingtrainingcourseshavebeenreviewedandapproved,priortodelivery,byaninstructorqualifiedthroughanaccreditedtrainingprogram.

Suppliers 3.8.9 CoordinatethedeliveryofthecontinuingtrainingoverthetimeschedulespecifiedbytheITOC.a. Continuingtrainingmustbecompletedduringthecalendaryeartomaintain

SeniorTechnicianandJuniorTechnicianpositionqualificationsandqualificationstoperformseniorlevelCIRPTasks.1) Techniciansmustcompleteannualcontinuingtrainingbeginningwith

thecalendaryearwhentheJuniorTechnicianpositionqualificationisattained.

2) The2018continuingtrainingcourseconsistingoftheinitialgaptrainingmustbecompletedpriortobeinggrantedCIRPTaskqualifications.

Utilities 3.8.10 Priortoeachoutage,identifyoutageactivitiesthatwillbeperformedby

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page16of48

supplementalpersonnelthatmayrequirejust-in-timetrainingduetotheinfrequent,complexnatureofthetask.a. Providethejust-in-timetrainingtothepersonnelwhowillberesponsible

forperformingthetasks.

4.0 ClarifyingNotes

None

5.0 References

5.1 SupplementalPersonnelProcessDescription,INPOAP-930,Revision3,September2016

5.2 PlantSupportEngineering:AdministrationProtocolforPortablePracticals(AP3)inStandardizedTaskEvaluations,EPRITechnicalReport1021072,November2010

5.3 GuidelinesforTrainingandQualificationofRadiologicalProtectionTechnicians,Revision1,ACAD93-008,March2016

5.4 EPRIStandardizedTaskEvaluationProgramImplementationGuide,Revision1,EPRITechnicalReport3002006470,July2015

5.5 AcceptableExperienceandTrainingforHPTechniciansatNuclearPowerPlants,RadiationProtectionManagement,Volume5,No.5(Sep/Oct1988),pp.70-74

5.6 GuidelineforPlantAccessandOtherStandardizedSharedTrainingCoursesandEvaluations,NEI03-04,Revision9,October2016

5.7 RadiologicalProtectionProcesses,INPO17-002

5.8 NEI03-05,PersonnelAccessDataSystemOperatingManual

5.9 NEISystemAdministratorBulletin2017-08—AdditionofRadiationProtectionTechnicianSkill/CertificationReports,October16,2017

6.0 RevisionSummary

6.1 Revisedsection1.1tousethetermCommonIndustryRPTasks(CIRPTask)insteadofStandardizedTaskEvaluation(STE).ThiswasdonebecausetheSTEprocessisaspecificEPRItrainingprocesstoachievetaskqualification.EquivalenttrainingfromotherentitiesisnotrecognizedbytheEPRISTEprocess.Thischangeisreflectedthroughouttheprocedure.

6.2 Revisedsection1.2toprovideanarrativedescriptionoftheoverallprogram.Significantchangesincludethefollowing:

6.2.1 Theuseofsub-headingstoaidreadingandcomprehension.6.2.2 Additionalclarificationonpositionqualifications.6.2.3 The2018continuingtrainingcourseforNISPgaptrainingmustbecompletedtoattain

anyCIRPTaskqualification.6.2.4 JuniorTechnicianswillberequiredtocompletecontinuingtraining.

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page17of48

6.2.5 IncreasedthetimeallowedtotransferNEISkillsqualificationstoCIRPTaskqualificationsusingAttachment3.

6.3 Addedsection2.8and2.9toaddressrequirementswhenatechnicianhasnotcompletedannualcontinuingtrainingduringapreviousyear.

6.4 Addedsection2.10tospecifyrecordsretention.

6.5 Revisedsection3.2.1toremovethestatementthatNANTeLautomaticallyupdatesPADS.PADSmaybeupdateddirectlyorthroughautomaticinterfacewithautilityLMS.

6.6 Addednotesin3.2and3.3tostatethatnon-EPRImembersmaynotadministeranSTE.

6.7 Revised3.5.1.ctoclarifythetypeofexperiencethatdoesnotrequirecompletionofAttachment5.

6.8 Addedsection3.5.4toclarifythattheindustrystandardcriteriaforevaluatingexperienceforANSIqualificationdoesnotnegatepriorevaluationsusingplant-specificprocedures.

6.9 Revisedsection3.6.1tospecifythatasupplierorasiteRPMmaysuspendaqualificationduetounacceptableperformance.

6.10 Revisedsection3.6.1todefineunacceptableperformance.

6.11 Revisedsections3.6.5and3.6.7toaddresshowremediationwillbeperformedifatechnicianchangesemployersbeforebeingremediatedforunacceptableperformance.

6.12 Revised3.7.1tolistexamplesoftrainingfeedback.

6.13 Revisedsection3.8toprovideadditionalguidanceforthedevelopmentanddeliveryofcontinuingtrainingasrelatedtothefollowing:

6.13.1 GaptrainingtoimplementtheNISPsinJanuary2018satisfiescontinuingtrainingrequirementsfor2018.

6.13.2 Considerationofrefreshertrainingforfundamentalsincontinuingtraining.6.13.3 TheuseofNANTeLforcontinuingtraining.6.13.4 ResponsibilitiesoftheITOCtodeterminethemethodsfordeliveryifCBTisnotasuitable.6.13.5 Requirementsforjuniortechnicianstocompletecontinuingtraining.6.13.6 Reviewandapprovalbyaninstructorqualifiedthroughanaccreditedprogram.

6.14 DeletedthreeACADobjectivesinAttachment1fortheRPTheoryforFundamentalsforJuniorTaskQualifications.DeletedACADobjectiveswere:

6.14.1 Readandzeroself-readingdosimeters.6.14.2 Describewhenaplannedspecialexposureisallowedandthedetailedrequirementsof

theplannedspecialexposure.6.14.3 Explaintheuseofeffectivedoseequivalentmonitoring,includingweightingfactorsand

limitationsintheprocess.

6.15 Revisedsection2.7.1inAttachment1tolimitRP2.06toperformonlythefollowingactivities:

6.15.1 RespondtoaContaminationAlarm.6.15.2 DeterminetheContaminationHazard.

6.16 Addedsection2.7.3inAttachment1forRP2.06torequirecompletionofRP2.01andRP2.02.

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page18of48

6.17 Revisedsection3.4inAttachment1toincludethefollowingforRP3.06:

6.17.1 PersonnelDecontamination.6.17.2 DoseAssessmentandDocumentation6.17.3 ReferencetorequiredACADtopicsincludedinRP2.06.

6.18 RevisedSTERP3.05inAttachments1,2,and3toremovethereferencetoaVeryHighRadiationArea.

6.19 Section3.5.3andAttachment2wererevisedtoincludePADSCodeJRTECHtoarchivethedatewhentheJuniorTechnicianPositionQualificationwasattainedorwhenprerequisitesweredeterminedtobesatisfied.

6.20 RevisedAttachment3todeletetherequirementforNEIRPTSkillRPT009tobegrantedequivalencyforRP2.05sinceajuniortechnicianisnotqualifiedtoindependentlyperformhighriskradiologicaljobcoverage.

6.21 RevisedAttachment5asfollows:

6.21.1 IncreasethemaximumallowablecredittowardsANSI3.1to2,000hoursforNavyELTexperience(non-overhaul).

6.21.2 Replacetheterm“jobcoverage”with“radiologicalsurveillanceandcontrol”tobemoredescriptiveoftheexperiencerequired.

6.22 AddedAttachment7toincludethePADSTransitionPlanthatisusedtoestablishthenewCIRPTasksinPADSandthemethodologytotransitionfrompreviouslyusedNEISkills.

6.23 RevisedAttachment7toincludeanactiontoevaluatelessonslearnedinusingPADSduringthefirstsixmonthsof2018toidentifychangesneededtoimprovequalificationtrackingandsubmitanECNtodrivethechangesandneededschedule.

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page19of48

Attachment1:TrainingProgramDescription

ThisattachmentdescribesthecontentofthetrainingprogramasrelatedtotheapplicabletopicslistedinACAD93-008,GuidelinesforTrainingandQualificationofRadiologicalProtectionTechnicians.ApplicableACADtopicsaretrainedinthevariousCIRPTasktrainingmodulesandthetwofundamentalscourses.

KnowledgeandskillrequirementstoimplementtheNISPprocessesthatmaynotbeaccuratelydescribedintheACADhavebeendeterminedthroughtaskanalysis.RefertotheapplicabletaskanalysisontheEPRISTEwebsiteforacompletedescriptionofknowledge,skills,cognitiveenablingobjectives,andperformanceenablingobjectives.TheITOCensuresthisattachmentismaintainedconsistentwiththecontentofthetrainingprogramby:

• OversightofanychangestoensurethisattachmentliststheACADknowledgeandskillsrequiredbysupplementalRPtechnicians.

• Reviewingproposedchangestoensuretrainingneedswillmeettheneedsoftheindustry.

• Reviewingthisattachmentevery3to5yearstoensureapplicableACADtopicsareincorporatedinthisattachment,fundamentalscourses,andSTEdocuments.

1.0 EntryLevelRequirementsEntrylevelcandidatesmusthaveahighschoolorequivalenteducationandthebasicmathematicalskillsaslistedinACAD93-008tobeginthetrainingprogram.Knowledgeandskillsmustenablethefollowing:

• Usearithmeticalfunctions,fractions,decimals,percentages,squareroots,averages,andsignificantfigures.

• Convert,multiply,anddividenumbersusingscientificnotation.• Applydimensionalanalysistoaddorequatephysicalquantitiesusingcommonunits.• Solvebasicalgebraicequations.• Applybasicgeometricprinciplesincalculatingareaandvolume.• Usegraphsandcontrolchartstoplotinformationandobtaininformationusingbothrectangular

andlogarithmiccoordinates.• Useexponentsandlogarithms• Usebasicunitssuchastemperature,pressure,flow,volume,mass,weight,distance,andtime.

2.0 JuniorTechnicianTrainingProgram2.1 RPTheoryFundamentalsforJuniorTaskQualifications

ThisfundamentalscourseprovidesatraineewiththecommonbackgroundknowledgeessentialforcompletingthejuniorlevelCIRPTaskqualifications.ApplicabletopicsfromACAD93-008include:

• Atomicstructureincludingatomicmassunits,protons,neutrons,electrons,isotopes,mass-energyequivalence,massdefect,bindingenergy,andbindingenergypernucleon.

• Nuclearinteractionsandreactionsincludingradioactivedecay,half-lifedetermination,andisotopeidentification.

• Fissionprocessandaffectsfromneutronleakage.• Sourcesandmagnitudesofresidualheatanddecayheat.

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page20of48

• BasiccharacteristicsofBWRsandPWRs,includingfissionproductbarriers.• Chemistryfundamentalsincludingthestructureofmolecules,principlesforionexchange,

andtheuseoftheperiodictable.• Identifythetypesofradioactivedecay.• Describeeachtypeofdecayusingbasicequations.• Performradioactivedecaycalculationsusingexponentialequationsandappropriategraphs.• Characterizealphaparticles,betaparticles,gammaraysand neutrons.• Describetheprocessofneutronactivationusingbasicequations.• Identifyspecificisotopesofconcerninpowerreactorsduringoperationandfollowingshutdown.• Discusscomplexdecayschemes,suchasnaturaldecaychains,reactor-produceddecaychain,

andequilibriumisotopes.• Identifyanduseradiologicalquantitiesandtheirunitsincludingactivity(curiesand

becquerels),exposure (roentgens),dose(radsandgrays),anddoseequivalent(remsandsieverts).

• Identifyandusesignificantdose termsincludingdeepdoseequivalent,eye(lens)doseequivalent,shallowdoseequivalent,effectivedoseequivalent,committeddoseequivalent,committedeffectivedoseequivalent,totaleffectivedoseequivalent,andtotalorgandoseequivalent.

• Equateradioactivitytodoseratethroughsimplerulesofthumbandassociatedcalculationforvarioussourcegeometries.

• Describemajorsourcesofnaturalbackground radiationincludingcosmic radiation,uraniumandthoriumdecaychains,potassium40,andradongas(includingdaughter products).

• Describeman-madesourcesofbackgroundradiationincludingmedicaldiagnosticx-rays,radiopharmaceuticals,consumerproducts(TV,smokedetectors,luminousdials),weaponstests,andairtravel.

• Describepotentialsourcesofexposuretothepublicfroma plantincludingliquidandgaseouseffluent releases,transportationofradioactivematerials,andmajoraccidents.

• Describemajorsourcesofradiationinaplantcontributingtoworkerexposuresincludingprimarysystempipingandcomponents,insidecontainmentduringpoweroperation,primarysystemfiltersanddemineralizers,radwasteprocesssystems,andradiography.

• Describetheprocessesandcharacteristicsofneutroninteractionwithmatterincludingelasticscattering,inelasticscattering,absorption,neutronactivation,andfission.

• Describehowneutronenergyaffectstheprobabilityofinteraction.• Basedonknowledgeofinteractionmechanics,selectthetypesofmaterialsforshielding

eachtypeofradiation.• Definebuildupfactor.• Performgammaandneutronshieldingcalculationsusingtheexponentialshielding

equation,halfandtenththicknessvalues,andempiricallyderivedgraphs.• Identifycommonshieldingpracticesforbetaparticlesandneutrons.• Describethephenomenonof"skyshine"andthemeansbywhichitcanbeminimized.• Applyqualityfactorsforconvertingdosetodoseequivalent.• Describethemechanismsofradiationinteractionswithcells.• Identifycellcharacteristicsthataffectradiosensitivity.• Definestochasticandnon-stochasticeffects.

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page21of48

• Explainthedifferencebetweenacuteandchronicradiationexposure,andforeach,describethesomaticeffects,geneticeffects,andteratogeniceffects.

• Foracuteexposures,describethedoseresponserelationship,acuteradiationsyndrome,LD-50/30,andLD-50/60.

• Forchronicexposures,describelong-termhealtheffects,quantitativeriskassessment,andcomparisonofradiationexposureriskstootherhealthrisks.

• Describethepotentialhealtheffectsandrisksduetoexposuretointernallydepositedradioactivity.

• Describesituationsinwhichtheriskduetoexposuretointernallydepositedradioactivitywouldbelowerthantheincreasedrisksresultingfromusingrespiratoryprotectionequipment.

• Describethestudiesusedtodeterminequalitativehealthrisks.• Discussthebasisforandimplicationsofthelinearzero-thresholddose-responsecurve.• Discusstheconceptof"effectivedoseequivalent"andhowitappliestoplanningworkin

contaminatedareasandradiationfields.• Discusswhyradiationexposurestobothindividualsandgroupsofworkersshouldbekept

ALARA.• Discusstherisktothegeneralpublicfromoperationofanuclearplant,andcompareitto

otherrisksacceptedineverydaylife.• Discusstherisktoadeclaredpregnantworkerandfetus.• Discussthephilosophyofradiationprotectionlimitsforpreventionofnon-stochasticeffects,

minimizationofstochastic effects,conceptof"acceptablerisk"or"comparablerisk,”andconceptsof"costversusbenefit"andALARA.

• Describepracticesforcomplyingwith10CFR20,"StandardsforProtectionAgainstRadiation"and10CFR37,“PhysicalProtectionofCategory1andCategory2QuantitiesofRadioactiveMaterial.”

• Describetheprinciplesofoperationandcharacteristicsofthetypesofdosimetryusedataplant,includingtherange(s)ofeachdevice,advantagesofeachtypeofdevice,limitationsofeachtypeofdevice,andradiofrequencyinterference.

• Describethetypesofdosimetryrequiredforvariousworksituationssuchasentryintotherestrictedarea,entryintotheradiologicallycontrolledarea,entryintopostedradiationareas,high-radiationareas,orvery-high-radiationareas,visitors,entryintoareaswithneutronradiation,entryintoareasofnon-uniformradiationfields,plannedspecialexposures,andspecialtyjobs(forexample,useofisotopicorpulsedx-rayradiography).

• Describethemethodsandequipmentusedataplanttodeterminedosesfromvarioustypesofradiationincludinggammawhole-bodydose,gammaextremitydose,betaskindose,neutrondose,andlensofeyedose.

• Demonstratethepropermethodforwearingdosimetryundervariousconditions,includingdeterminingtheproperlocationofdosimetry.

• Describetypicalcriteriaforperformanceofinvestigationsofdiscrepanciesindosimetryreadings.

• Explainactionstotakeintheeventofabnormalsituations,suchaslost,damaged,alarmingandoff-scalehighdosimetry,exposureinexcessofplantadministrativelimitsornuclearregulatorylimits,andsignificantdifferencesamongmultipledosimeterreadings

• Describeatypicalexposuretrackingsystem.

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page22of48

• Defineannuallimitonintake,derivedairconcentration,weightingfactors,andsolubilityclass.

• Explainhowannuallimitonintake,committeddoseequivalent,committedeffectivedoseequivalent,andthetargetorganrelatetotheappropriatederivedairconcentration.

• Locatederivedairconcentrationvaluesandcalculatederivedairconcentrationhoursforpracticalsituationsinvolvingexposureofindividualstoairborneradioactivity.

• Definebiologicalhalf-lifeandeffectivehalf-life.• Describerequirementsformonitoringandreportinginternalexposure.• Statethepurposeofhavingplantadministrativelimitsforradiationexposure.• Explainthedifferencesbetweengeneralareadoserateandcontactdoserateandhoweach

isusedincontrollingexposures.• Describesource-reductiontechniquesthatcanbeusedtoreduceworkers'radiation

exposuresincludingdecontaminationofmajorsystemcomponents,flushingofhotspots,sequencingofworksohigh-dose-rateitemsareremovedfromtheworkareaearlyon,reductionofcobaltinsystemcomponents,enhancedfiltrationofreactorcoolant,earlyboration(PWR),hydrogenperoxide(PWR),lithiumcontrol(PWR),activatednickelsampling(PWR),softshutdown(BWR),useofspecialtyresins,zincinjection,andelementalcobaltsampling.

• Describethecomponentsthatcontributetocobaltinventoryinthereactorcoolant.• Explainthedifferencebetweenlooseandfixedcontamination.• Discussthereasonforhavinglowerlimitsforalphacontamination.• Identifypotentialsourcesofradioactivecontamination,includingworkoperationsthatcan

generatecontamination.• Definecross-contamination,anddescribehowitcanresultintheuncontrolledspreadof

contamination.• Describetechniquesusedtopreventthespreadofcontaminationwhenbringing

contaminatedmaterialsoutofpostedareas.• Describethepurposeanduseofsingleandmultiplestep-offpadsincontrollingthespread

ofcontamination.• Discussthetypicalrequirementsforworkersenteringandworkinginareaswith

contaminationaboveplantlimits,suchasaradiationworkpermit,protectiveclothing,useoftoolsfrom"hottoolroom,"step-offpad,notificationoftheRadiologicalProtectionDepartment.

• Identifytheisotopesofprimaryconcernforairborneradioactivityataplant.• Explainthecharacteristicdifferencebetweenparticulate,iodine,tritium,andnoblegases

andhowtheyaffectthemethodofdetectingandcontrollingairborneradioactivity.• Explainthepurposeofusingradiationworkpermits(RWPs).• IdentifytypicalrequirementsfortheuseofRWPs.• Describetypicalproceduresforrequesting,initiating,completing,modifying,approvingand

terminatinganRWP.• Explainthedifferencebetween"standing"andjob-specificRWPsandwheneachisused.• IdentifytheinformationthatshouldbeincludedonRWPs,suchasthescopeofwork

coveredbytheRWP,radiation,contaminationandairborneradioactivitylevels,internalandexternaldoseactionlevels,personnelauthorizedtousetheRWP,dosimetryrequirements,respiratoryprotectionrequirements,protectiveclothingrequirements,the

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page23of48

periodduringwhichtheRWPisvalid,radiologicalprotectioncoverageandnotificationrequirements,andspecialprecautions,restrictionsorlimitations.

• DescribetheadministrativeprocessoflogginginonanRWP.• ExplainthepurposeofhavingeachworkerreadandloginontheRWP.• Identifyisotopesexpectedtobepresentintheeventofaradiologicalincident.• Identifyradiologicalsurveysthatshouldbetakenasaresultofanincidentandthepurpose

ofeach.• Describetheprocedurefordocumentingradiologicalincidentssuchasaconditionreportor

personnelcontaminationreports.• Describethetypesofincidentsrequiredtobedocumented.• Explainthedifferencesbetweenfixedandloosesurfacecontaminationandtheresulting

differencesintechniquesusedfordecontamination.• Describewhysomeareasofaplantmaynotbedecontaminated(forexample,high-

radiationareasandinaccessibleoverheadareas).• Identifyandexplainthetechniquesforreducingthevolumeofradioactivesolidwaste

generated,suchasminimizingtheamountofmaterialenteringtheradiologicallycontrolledarea,decontaminating,segregatingnonradioactivewaste,reusingclothrags,shoecovers,bagsandprotectiveclothing,wrappingcleanequipmenttopreventitscontamination,compacting,usinga"hottoolroom,"removingpackingmaterialsoutsidetheradiologicallycontrolledarea.

• Basicfunctionandstructureofdifferentvalvetypes,pumpsandseals,valveactuators,andvalvepacking.

2.2 STERP2.01–OperatePortableRadiologicalSurveyInstruments

2.2.1 ThisCIRPTaskenablesatraineetoperformthefollowingactivitiesperNISP-RP-01,PortableSurveyInstruments:• PerformPre-UseInstrumentInspectionsandChecks• OperateanIonChamberInstrument• OperateaGMSurveyInstrument• OperateaCountRateMeterwithaGMFriskerProbe• OperateaCountRateMeterwithanAlpha,Beta,orDualScintillationProbe• OperateaNeutronRem-Meter

2.2.2 ApplicabletopicsfromACAD93-008include:

• Determinethecalibrationstatusofinstruments.• BasictheoryofoperationandoperatingcharacteristicsofGMdetectors,scintillation

detectors,proportionalcounters,ionchambers,andneutronsurveyinstruments.• Instrumentefficiency,thefactorsthataffectinstrumentefficiency,andcalculation

ofinstrumentefficiency.• Effectsofbackgroundradiation.• Differentiationbetweentheoperatingcharacteristicsofaradiationfieldsurvey

instrumentandaradioactivecontaminationsurveyinstrument.• Describethemethodandpurposeofperformingbatterychecks,adjustingscalesto

zero,sourcechecks,responsechecks,andbackgroundmeasurements.

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page24of48

• Describeconditionsthatmightaffectsurveyinstrument responseincludinggeotropism,atmospheric pressure,high humidity,mixedradiation fields,radioactivenoblegasatmospheres,extremetemperatures,off-scalereading,radiofrequencyinterference,careandmaintenance.

• Convertmeterindicationsofcontaminationdetectionequipmenttocontaminationlevelsinstandardunits.

• Selecttheappropriateinstrumentforperformanceofradiationsurveysundervariousconditionsincludingexpectedradiation type(s),expecteddoserate,andenvironmentalconditions.

• IdentifytheinstrumentstypicallyusedtoperformcontaminationsurveysincludingGeiger-Muellerdetectors,proportionalcounters,alphascintillationdetectors,andplasticscintillationdetectors.

• Performanddescribetheoperationalchecksperformedoncountingequipmentincludingsourcechecks,responsechecks,andbackgroundmeasurements.

• Explaintheeffectofbackgroundradiationontheabilitytodetectlowlevelsofcontamination.

2.3 STERP2.02–PerformRadiationandContaminationSurveys

2.3.1 ThisCIRPTaskenablesatraineetoperformthefollowingactivitiesperNISP-RP-02,RadiationandContaminationSurveys:

• SurveyDoseRatesinanArea• DirectlyFriskaSurface• PerformaSmearSurvey• PerformaLargeAreaSmearSurvey• SurveyforDiscreteRadioactiveParticles• AnalyzeSmears• RespondtoAbnormalSurveyResults• DocumentaRadiologicalSurvey

2.3.2 ApplicabletopicsfromACAD93-008include:• Define"generalarea"and"contact"doserates,andidentifyeachonsurveymaps.• Specifythebackgroundlimitsforusingcontaminationsurveyinstruments.• Identifyunusualconditionsthatmightaffectcountingequipmentresponseincluding

high humidity,abnormalbackground,electronicnoise,orextremetemperature.• Describethestatisticalnatureofradioactivedecayasitrelatestouncertainties

encounteredwhenmeasuring radioactivity.• Explaintheoperatingcharacteristicsofcountingequipment.• Explaintheprinciplesofoperationandoperatingcharacteristicsofarearadiation

monitors.• Describetheprecautionsandsurveytechniquesforenteringanareainwhichradiation

levelsareunknown.• Explainactionsthatshouldbetakenifsurveysshowradiologicalconditions

significantlydifferentfromthoseexpected,suchashighcontactdoserates,highgeneralareadoserates,unexpectedlowdoserates,highbetadoserates,highcontaminationlevels,highairborneradioactivity,unexpectedlackofairborne

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page25of48

radioactivity,unexpectedalphacontamination,andunexpectedradiologicalconditionsresultinginpostingchanges.

• Describehowtoestimatebetaandgammadoseratesfromcontaminationonfloor,airborneradioactivity(forexample,particulate,iodine,noblegasortritium),andpipesortankscontainingradioactiveliquids.

• Selecttheappropriateinstrumentforasurveyanddemonstrateproficiencyinusingit.

• Discussactionstobetakenifradiationlevelsareoff-scale.• Explainhowtoobtainandrecorddoseratesfrommixedradiation fields.• Demonstratepropertechniquesforsurveyinganitemforcontaminationusingahand-

held frisker.• Demonstrateactionstoestimatecontaminationlevelswhencontaminationsurvey

instrumentsareoff-scale.• Describerequirementsfordocumentationofradiologicalsurveys,includingtheuseof

surveymaps,reviewingcompleted surveys,retaining records,andupdatingareamapsandpostings.

• Demonstratehowtouseplanchetsandminimizecontaminationofcountingequipment.

• Performaradiationsurvey,anddescribeproceduresfortheperformanceofroutineradiationsurveys,includingfrequencyofsurveys,instrumentstobeused,areastobesurveyed,surveytechniques,anddocumentationofresults.

• Describethedifferentlevelsofalphacontamination,includingtheassociatedcontrolswitheachlevel,associateddosecontributionofeachlevel,andbeta,gammaandalpharatios.

• Performanareacontaminationsurvey,anddescribeproceduresforperformingroutineareacontaminationsurveys,includingfrequencyofsurveys,instrumentstobeused,areastobesurveyed,surveytechniques,anddocumentationofresults.

• Describeproceduresandlimitationsforperformingspecialcontaminationsurveys,includingradioactiveparticlesonpersonnelorequipment,radioactiveparticlesinarea,alphacontamination,smallvolumesofliquidbeingremovedfromtheradiologicallycontrolledarea,loosematerial,suchassand,beingremovedfromtheradiologicallycontrolledarea.

2.4 STERP2.03–CollectandEvaluateRadiologicalAirSamples

2.4.1 ThisCIRPTaskenablesatraineetoperformthefollowingactivitiesperNISP-RP-03,RadiologicalAirSampling:• DeterminetheNeedforanAirSample• CollectaParticulateandIodineAirSample• CollectaNobleGasSample• OperateaContinuousAirMonitor(CAM)• SetUpandOperateaPersonalAirSampler• AnalyzeaParticulateAirSampleFilter

2.4.2 ApplicabletopicsfromACAD93-008include:

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page26of48

• Identifyfactorsthataffectthestatisticalaccuracyofradioactivitymeasurementsincludingcountrate,background,count time,equipmentefficiency,sample volume,sample geometry.

• Explainhowthestatisticalaccuracyofmeasurementscanbeimproved.• Definelowerlimitofdetection (LLD).• Explaintheprinciplesofoperationandoperatingcharacteristicsofcontinuousair

monitors,iodineairmonitors,particulateairmonitors,andnoblegasairmonitors.• Explaintheprinciplesofoperationandtheapplicationsforlowvolume,highvolume

andpersonalairsamplers.• Identifythetypesofsamplingequipmentusedforparticulates,tritium,noblegas,

andiodine.• Identifythetypesofbeakersusedforairsampling,e.g.Marinelli,andexplaintheir

use.• Demonstratetheapplicationofsamplecollectionequipmentusedforparticulates,

iodine,andnoblegas.• Demonstratehowtoquantifytheradioactivitycollectedonasampleand

differentiatethetypeofnuclidesthatarepresent.• Demonstratetheconversionofunitstorelateairborneconcentrationsinstandard

unitsandderivedairconcentrations.• Demonstrateoperationoflow-volumesamplers,high-volumeairsamplers,and

personalairsamplers.• Collectairbornesamples,anddescribeproceduresforcollectingroutineairborne

radioactivitysamples,includingfrequencyofsurveys,typesofsurveysperformed(particulate,iodine,noblegas,tritium),instrumentstobeused,areastobesampled,samplingtechniques,anddocumentationofresults.

• Describetheprocedurefordeterminingthederivedairconcentration,derivedairconcentrationhours,andannuallimitonintakeforaworkerinanairborneradioactivityarea.

• Explainthedifferencebetweenlow-volume,high-volumeandpersonalairsamples,includingwheneachisused.

• Discussthepurposeofusingacontinuousairmonitor,andidentifysituationsinwhichcontinuousairmonitorsshouldbeused.

• Identifyworksituationsandworkpracticesthatcouldproduceairborneradioactivity,suchasleaksfromcontaminatedsystems,openingacontaminatedsystem,workinginhighlycontaminatedareas,grinding,cuttingorweldingradioactiveorcontaminatedmaterials.

• Discussproceduresforconductingin-progressairborneradioactivitysamples,includingwhensamplesshouldbetaken,properplacementofairsamplingequipment,thedefinitionof"breathingzone"anddeterminingtheappropriatebreathingzoneforvariousworksituations,methodofsampling(forexample,low-volume,high-volume,personalorcontinuousairmonitor),typeofsampling(forexample,particulate,iodine,noblegasortritium),anddocumentationofresults.

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page27of48

2.5 STERP2.04–PostLowLevelRadiologicalHazards

2.5.1 ThisCIRPTaskenablesatraineetoperformthefollowingactivitiesperNISP-RP-04,RadiologicalPostingandLabeling:

• PostExternalRadiationHazards(excludingHighRadiationAreas,LockedHighRadiationAreasandVeryHighRadiationAreas)

• PostAreaswithSmearableContamination• PostAirborneRadioactivityAreas• LabelTools,Equipment,andContainersofRadioactiveMaterial

2.5.2 ApplicabletopicsfromACAD93-008include:

• Defineandstatethepostingrequirementsforaradiologicallycontrolledarea,radiationarea,high-radiationarea,lockedhigh-radiationarea,very-high-radiationarea,hotspots,andradioactivematerialsarea.

• Describethepostingproceduresforpostingareasasairborneradioactivityareas.• Identifythepackaging,markingandlabelingrequirementsforradioactivematerials

storedonsite.• Statethepostingrequirementsforcontaminationareas,high-contaminationareas,

alphacontaminationlevels,anddiscreteradioactiveparticles.• Describeproceduresforpackaging,labelingandmarkingradioactivelycontaminated

materials.• Describetheapprovalandpostingrequirementsforradioactivematerialareasand

radioactivematerialstorageareas.

2.6 STERP2.05–ControlAccessIntoHighRadiationAreas

2.6.1 ThisCIRPTaskenablesatraineetoperformthefollowingactivitiesperNISP-RP-05,AccessControlsforHighRadiationAreas:• BriefforanHRAEntry• ControlAreaConfigurations

2.6.2 ApplicabletopicsfromACAD93-008include:• Describetheaccesscontrolsrequiredforentryintoeachlevelofradiologically

controlledarea(asapplicable)includingRWPrequirements,dosimetry,notificationtoRadiologicalProtectionDepartment,instrumentoralarmingdosimeter,lockedbarriers,warningsignsandlights,andkeycontrols.

• Discusstheconductofprejobbriefingsforradiologicalwork,includingwhenbriefingsarerequired,frequencyofbriefingsforcontinuingjobs,personnelrequiredtoattendbriefings,itemstobediscussedinbriefings,andimportanceofresolvingallquestionsinbriefings.

2.7 STERP2.06–MonitorforPersonnelContamination

2.7.1 ThisCIRPTaskenablesatraineetoperformthefollowingactivitiesperNISP-RP-06,PersonnelContaminationMonitoring:• RespondtoaContaminationMonitorAlarm• DeterminetheContaminationHazard

2.7.2 ApplicabletopicsfromACAD93-008include:

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page28of48

• Describetheprinciplesofoperationandoperatingcharacteristicsofpersonnelwhole-bodycontaminationmonitors,handandfootmonitors,andportalmonitors.

• Describerequirementsformonitoringpersonnelforradioactivecontaminationwhenexitingcontaminatedareas,whenexitingalphacontaminationareas,whenexitingdiscreteradioactiveparticleareas,whenexitingtheradiologicallycontrolledareas,andwhenexitingaplant.

• Identifypersonnelwhoshouldbenotifiedofpersonnelcontaminations.• Describeproceduresforhandlingpersonnelshoeorclothingcontamination,

includingdocumentationrequired,decontaminationmethods,anddispositionofarticlesthatcannotbedecontaminated.

• Describetheproceduretobefollowedwhenanindividualiscontaminated,includingrestrictingperformanceoffollow-upcontaminationsurveys(whole-body)toradiologicalprotectionpersonnel,recordingcontaminationlevels,location,dateandtimeonthepersonnelcontaminationreport,directingdecontaminationofareasabovelimits,identifyingwhennasalsmearsand/orawhole-bodycountarerequired,documentingfinalresultsofdecontamination,andinterviewingindividualtoidentifysourceofcontamination.

• Selecttheappropriatepersonneldecontaminationtechniquesforvariouslevelsofcontaminationandthedegreetowhichcontaminationisfixedsuchasremovingparticleswithtape,washingwithlukewarmwaterandmilddetergent,scrubbinggentlywithsoftbrush,shavingcontaminatedhair,sweating,andchemicaldecontamination

• Explainwhythefollowingarenotusedforpersonneldecontamination:hotwater,coldwater,andabrasivecleaners.

• Identifyconditionsinwhichskindosecalculationsshouldbeperformedasaresultofskincontamination.

• Identifysituationsinwhichpersonneldecontaminationshouldbereferredtootherappropriatepersonnelsuchascontaminatedwounds,contaminatedeyes,ears,noseorthroat,andcontaminationthatcannotberemovedusingapprovedtechniques.

• Describespecialproceduresfordecontaminationofradioiodines.• Discussadditionalactionsornotificationsrequiredifaninjuredpersonis

contaminated.• Statethelimit(alarmsetpoint)forradioactivecontaminationonpersonnel.

2.7.3 ApplicabletopicsfromACAD93-008areincludedinSTERP2.01andSTERP2.02.

2.8 STERP2.07–ControlRadioactiveMaterialWithinanRCA

2.8.1 ThisCIRPTaskenablesatraineetoperformthefollowingactivitiesperNISP-RP-07,ControlofRadioactiveMaterial:• ReleaseofPersonalItems• StorageofRadioactiveMaterial• MovementofRadioactiveMaterial

2.8.2 ApplicabletopicsfromACAD93-008include:

• Describetheprinciplesofoperationandoperatingcharacteristicsoftoolmonitors.

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page29of48

• Statethelimitsforradioactivecontaminationforreleaseofmaterials,equipment,andareasforunrestricteduse.

• Describerequirementsformonitoringtoolsandequipmentforradioactivecontaminationforreleasefromtheradiologicallycontrolledarea,forunrestricteduseintheradiologicallycontrolledarea,forstorageorreusewithintheradiologicallycontrolledarea,andforreleasefromaplant.

• Discussproceduresfordisposalofmaterialsusedinthedecontaminationprocess,suchasrags,clothsoroil-impregnatedwipes,detergentsolutions,andchemicals.

• Describethemethodsusedfordecontaminationofareaswithinaplant,suchasmopping,usingoil-impregnatedwipes,wipingwithdamprags,vacuuming,andscrubbingwithbrushes.

• Discussrequirementsforconductinganddocumentingpost-decontaminationsurveys.

• Identifyspecialprecautionsassociatedwiththedisposalofmaterialsusedindecontamination,suchaswetmopheads,liquidscontainingdetergents,vacuumcleanerdust,mixedwaste,discreteradioactiveparticles,andalphacontamination.

• IdentifyNRC-licensedradioactivematerialsrequiringspecialcontrols,anddiscussthecontrolsrequired.

• Describeproceduresforstorageandretrievalofradioactivematerials.• Identifyspecialprecautionsandrestrictionsforstorageofradioactivematerials

outdoors.• Discussproceduresforpreventingthelossofradioactivematerials.• Describeplantrequirementsformonitoringdecontaminatedequipmentpriorto

release.• Discussproceduresfordisposalofmaterialsthatcannotbedecontaminated

successfully.

2.9 STERP2.08–ControlHEPAVacuumsandVentilationEquipment

2.9.1 ThisCIRPTaskenablesatraineetoperformthefollowingactivitiesperNISP-RP-08,UseandControlofHEPAFiltrationandVacuumEquipment:

• SelectionofHEPAEquipment• HEPASetup• MonitoringofHEPAOperation• StorageofHEPAEquipment

2.9.2 ACAD93-008doesnothavetopicsapplicabletoNISP-RP-08.TheEPRISTEtaskanalysisidentifiesknowledgeandskillsrequiredtoimplementtheprocessstepslistedabove.

2.10 STERP2.10–PerformLowRiskRadiologicalJobCoverage

2.10.1 ThisCIRPTaskenablesatraineetoperformthefollowingactivitiesperNISP-RP-10,RadiologicalJobCoverageforactivitieswithlowradiologicalrisk:

• PrepareforJobCoverage• SurveyWorkAreas• MonitorandVerifyProtectiveMeasures• RespondtoUnexpectedConditions

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page30of48

• ExerciseStopWorkAuthority

2.10.2 ApplicabletopicsfromACAD93-008include:• Explaintherequirementsfortheuseofmultiplewhole-bodydosimetry,including

conditionsunderwhichmultiplebadgingisrequired,properplacementofdosimetry,administrativeproceduresforissuingandcollectingmultipledosimeters,andthemethodofdeterminingwhole-bodydoseofrecord.

• Explainrequirementsfortheuseofextremitydosimetry,includingconditionsunderwhichextremitydosimetryisrequired,administrativeproceduresforissuingandcollectingextremitydosimetry,andthetype(s)ofextremitydosimeters.

• Describethetechniquesforcontrollingindividualexposureswhileperformingradiologicalwork,suchastheuseofpocketionchambersoralarmingdosimeterstoallowworkerstomonitordosereceived,assignmentofstaytimes,radiationworkpermits(RWPs),RPTjobcoverage(localorvideomonitor),useoflow-dosewaitingareas,andremoteelectronicdosimeters.

• Describeproceduresforcontrollingexposuretobetaradiation.• Identifytechniquesforcontrollingworkers'exposuretobetaradiation,suchas

protectiveclothing,faceshield,andglasses.• Explainhowexposuregoalscanbeusedtoreduceindividualandcollective

exposuresforspecificradiologicaljobs,workgroups,andtheplant.• Describethemethodforestimatingandassigningneutrondoseusinggammato

neutronratios.• ExplaintheALARAconceptandhowitisappliedtotheperformanceofradiological

work.• Explaintheactionlevelsandcorrespondingdose-reductionstepstakenbasedon

estimatedcumulativedose.• Describetheconceptof"totalrisk"asappliedtotheprescriptionofradiological

workcontrols.• DescriberequirementsforperformingtotaleffectivedoseequivalentALARA

evaluations.• Describeworktimereductiontechniquesthatcanbeusedtoreduceworkers’

radiationexposure,suchasprejobplanningandpreparation,prejobmock-uptrainingforworkerfamiliarity,reviewofproceduresforworkabilityandefficiency,useofspecialtoolstoimproveworkerefficiency,improvementofworkercomfortbycontrollingenvironment(temperature,lighting,humidity,space),prefabricationofequipmentinlow-doseorno-doseareas,anddecontaminationtoreduceprotectiveclothingrequirements.

• Describethetechniquesbywhichincreaseddistancecanbeusedtoreduceworkers'radiationexposure,suchaspositioningworkersawayfromhotspotsorhigh-doseareas,useofremoteoperatorsorspecialtoolstoincreaseworkers'distancefromasource,andremovingequipmenttolow-doseareasformaintenance.

• Describetheconsequencesofremovingpermanentortemporaryshieldingwithoutproperreviewandauthorization.

• Describeadministrativeproceduresforthecontrolofpermanentandtemporaryshielding.

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page31of48

• Discussfactorsthatdeterminetheultimateeffectivenessofinstallingpermanentortemporaryshielding,suchasthecostofinstallation(dollarsandman-rem)versusbenefit(s)ofinstallation,physicalspacelimitations,10CFR50.59reviewconstraints,floorloadingconstraints,pipeandpipehangerloadconstraints,andengineeringevaluations.

• Evaluatetheeffectivenessoftemporaryshieldinginvariouspracticalapplications.• Describetheproperuseofbodyshieldveststoreduceworkerexposure,including

theimportanceoftheneedtobriefworkersonproperuseofthevests,priortoperformingwork,ensuringthevestisadequatelyshieldingthebodycompartmentsrequiringprotection,andemployingmethodstotrackandrecordworkeruse.

• Describetechniquesforcontrollingthespreadofcontaminationtopersonnelandequipment,includingprotectiveclothing,packagingofcontaminatedmaterials,useofcontainmentdevices,controlofleaksfromradioactivesystems,anddecontamination.

• Describethedevicesusedforcontainmentofcontaminationduringradiologicalwork,suchasdrapes,glovebags,tents,drainbottles,bermsorabsorbentstocontainliquid,andcatchcontainments.

• Identifytheconditionsinwhichtheuseofeachtypeofcontainmentdeviceshouldbeconsidered.

• Describetechniquestominimizethespreadofcontaminationwhenusingcontainmentdevices,includingcontainmentinspectionandmaintenance,properdrainage,airfiltration,protectiveclothingrequirements,precautionsduringuse,removalofcontaminatedequipment,andpostjobremovalordecontaminationofthecontainmentdevice.

• Identifymethodsbywhichaworksitecanbepreparedinadvancefortheperformanceofhighlycontaminatedwork,suchasworkareacoveredand/orskirtedwithdisposablematerial,workareacoveredand/orskirtedwithlaunderable,reusablesheeting,workareacoveredwithstrippablepaint,concretesurfacespaintedforeaseindecontamination,anduseoffilteredvacuumsandventilation.

• Describecontrolsthatcanbeusedtoreduceexposuretoairborneradioactivity,suchasusingfilteredventilation,decontaminatingareasorequipmenttoeliminatethesourceofairborneradioactivity,usingcontainmentdevices(tents,glovebags),repairingleaksincontaminatedsystems,performingworkunderwaterorkeepingcontaminatedmaterialswet,usingencapsulationcoatingsandmaterials,andusingrespiratoryprotection.

• Discussproceduresfortrackingexposuretoairborneradioactivity,includinglevelsatwhichtrackingisrequiredandsamplingrequirements.

• Discussrequirementsforenteringandworkinginairborneradioactivityareas,suchastheradiationworkpermit,respiratoryprotectionequipment,andnotificationofRadiologicalProtectionDepartment.

• Describethemethodsthatcanbeusedtoinvokeradiologicalprotectionrequirementsincludingknowledgeproceduresteps,radiationworkpermit,verbalinstructionsfromthesupervisor,verbalinstructionsfromradiologicalprotectionpersonnel.

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page32of48

• Explaintheresponsibilitiesthefollowingpersonnelregardingspecifying,complyingwith,monitoring,andenforcingradiologicalprotectionandALARArequirements:workers,workers’supervisors,RPTs,andRPsupervisors.

• DemonstrateactionsthatshouldbetakenifradiologicalconditionsatthejobsitearesignificantlydifferentfromthoseshownontheRWPordiscussedintheprejobbriefing.

• Identifyareasinaplantthatrequirespecificmanagerapprovalforentryduetoextremeradiologicalconditions.

• ExplainactionstobetakeniftheworkscopeorworklocationchangesfromthatlistedontheRWPordiscussedintheprejobbriefing.

• ExplainwhyRPTshavestop-workauthority,andidentifythetypesofsituationsinwhichthisauthorityshouldbeimplemented.

• Discussactionsneededtorecoverfromastop-workcondition.• Identifyandexplainthefactorsthatdeterminetheneedforandtypeofprotective

clothingtobeusedduringradiologicalwork,suchasthelevelofcontamination,positionoftheworker(s),presenceofairborneradioactivity,presenceofliquid,typeofworkbeingperformed,environmentalconditions,and"totalrisk"concept.

• Describespecialprecautionsthatshouldbeused,whenpractical,tocontrolorreduceexposuresundercertainradiologicalconditions,suchasassigningstaytimesandtimekeepers,performingcontinuousRPTcoverage,assigningalarmingdosimetersordoseratemeters,providingtemporaryshielding,specifyinglow-dose-ratewaitingarea,removinghigh-dose-ratesources,usingelectroniccommunicationsandremotemonitoringtelemetry.

• Describeprecautionsthatshouldbeusedwhenpracticaltocontrolthespreadofradioactivecontaminationduringradiologicalwork,suchastheuseofcontainmentdevices,requirementsforspecialprotectiveclothing,andjobsitepreparationwithdisposablecoverings.

• Describeprecautionsthatshouldbeused,whenpractical,tocontrolairborneradioactivity,suchasspecialventilation,containmentdevice,decontaminationoftheworkarea,andperformingworkunderwaterorwettingcontaminatedworksurfaces.

• Evaluatetheuseoftemporaryshieldingforspecificjobapplications.• Discusstheconditionsunderwhicheachofthefollowingshouldbeinvokedduring

radiologicalwork:continuousRPTcoverage,intermittentRPTcoverage,RPTpresentatstartofjob,advancedradiationworkercoverage,remoteRPTcoverage,andnoRPTcoverage.

• Describetheradiologicalsurveysthatshouldbeperformedundervariousradiologicalconditionswhenworkisinprogress,includingradiationsurveys,contaminationsurveys,airborneradioactivitysurveys,andlockedhigh-radiationareasurveys.

• Identifylocationsthatshouldbeincludedinradiationsurveyswhenworkisinprogress,suchasthecomponentbeingworkedon,nearbypipingandcomponents,locationwhereworkersarepositioned,thepathtoandfromtheworksite,low-doseareas,hotspots,andpotentialtransientdoserateareas(forexample,resinlines,drainlines,movementofsources).

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page33of48

• Discussplantaccesscontrolproceduresforentryintothefollowingforperformanceofwork:radiologicallycontrolledarea,radiologicallycontrolledarea,restrictedarea,radiationarea,high-radiationarea,lockedhigh-radiationarea,very-high-radiationarea,contaminatedarea,airborneradioactivityarea,andneutronradiationarea.

• Describeactionsrequiredwhenleavingaworksiteuponcompletionofradiologicalwork,suchasfollows:packaging,marking,andtransferringcontaminatedtools,equipment,andtrash,removingprotectiveclothing,monitoringforcontamination,returningspecialdosimetry,loggingoutofRWP,andnotifyingradiologicalprotectionpersonnelofjobcompletion.

• Demonstratetheinterpersonalskillsandhumanrelationsskillsusedtoperformjobcoverageandchallengepoorradworkerpracticeseffectivelyinconditionssuchasthemaincontrolpoint,satellitecontrolpoint,jobcoverageduringworkerperformanceproblems,andexitpointcontrol.

• Identifyworkpractices,instrumentresponsesoralarmsindicatingthepotentialforaradiologicalincident.

• Describe,ingeneralterms,theexpectedresponsetoradiologicalincidents,includingtheprecedencegiventotreatinginjuries,mitigatingandminimizingexposuretoplantpersonnelandthepublic,mitigatingandminimizingdamagetoequipment,andnotifyingappropriatepersonnel.

• Discusstheroleofvariousplantpersonnelinrespondingtoradiologicalincidents,includingthefollowing:personneldirectlyinvolvedintheincidentandimmediatelyaffectedbyit(regardlessofworkgroup),otherpersonnelnearbybutnotaffected,controlroompersonnel,RPTs,radiologicalprotectionsupervisors,firebrigade,auxiliaryoperators,andplantmanagers.

• Identifytheradiologicalconsequencethatmayresultfromvariousincidents,suchasasuddenincreaseindoserates,uncontrolledspreadofcontamination,leakorspillofcontaminatedliquid,injurytoanindividualwhileperformingradiologicalwork,fireintheradiologicallycontrolledarea,lossofahigh-activityradiationsource,degradedcore,anduncontrolledorunsecuredhigh-radiationareas.

• Identifytheimmediateactionstobetakentocontrolandminimizetheextentofradiologicalincidentssuchasanarearadiationmonitoralarm,off-scalepocketionchamber,alarmonelectronicdosimeter,continuousairmonitoralarm,spillofcontaminatedliquidorresin,spillofdrycontaminatedmaterial,contaminatedpersonnel,contaminatedinjuredpersonnel,fireintheradiologicallycontrolledarea,andunmonitoredreleaseofradioactivitytotheenvironment.

• Identifytheprotectiveclothingrequirementsforareadecontamination.• Explainwhyareadecontaminationshouldbeginattheareasoflowest

contaminationlevelsandprogresstowardareasofhighlevels.• Describeproceduresforcontrollingdiscreteradioactiveparticles.

3.0 SeniorTechnicianTrainingProgramTheSeniorTechnicianTrainingProgramisusedtoqualifytechnicianstoperformtasksthatrequireexperienceasspecifiedbyANSI18.1orANSI3.1.TraineesmaybegincompletingseniorlevelCIRPTasksaftertwoyearsofexperienceasdeterminedusingsection3.5ofNISP-RP-12;thisenablestechniciansto

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page34of48

independentlyperformseniorleveltasksifalicenseeiscommittedtoANSI18.1.IfalicenseeiscommittedtoANSI3.1,atechnicianqualifiedtoperformseniorleveltasksunderANSI18.1maynotindependentlyperformsuchtasksunlessANSI3.1requirementsaremetasdescribedinsection3.5ofNISP-RP-12.Techniciansmaycompletefundamentalstrainingandknowledgeexamsforseniorleveltaskqualificationaftercompletingallofthejuniorleveltaskqualifications.However,performanceevaluationscannotbecompleteduntiltheexperiencerequirementsmeetANSI18.1requirements.

3.1 RPTheoryFundamentalsforSeniorTaskQualificationsThisfundamentalscourseprovidesatraineewiththecommonbackgroundknowledgeessentialforcompletingtheseniorlevelSTEs.ApplicabletopicsfromACAD93-008include:• AuthorityandresponsibilitiesoftheNRC.• Purposeandsignificanceofsitetechnicalspecifications.• Identifyplantsystemscontributingtotheradiologicalsourcetermofaplantand:

! Statethepurposeofeachsystem.! Identifymajorcomponentsandequipmentcontributingtotheradiologicalsource

term.! Identifyconditionsthatprecludesafeworknearsystemcomponents.! Describetheradiologicalprecautionsassociatedwithmaintenancetasks.

• Discussthenormaluses,locations,advantages,disadvantages,andrelativesensitivityofaportablefrisker,whole-bodycontaminationmonitor,portalmonitor,bagcounters,toolmonitors,andconveyortypecontaminationmonitors.

3.2 STERP3.04–PostaHighRadiationArea,LockedHighRadiationArea,orVeryHighRadiationArea

3.2.1 ThisCIRPTaskenablesatraineetoperformthefollowingactivitiesperNISP-RP-04,RadiologicalPostingandLabeling:

• PostHighRadiationAreas,LockedHighRadiationAreasandVeryHighRadiationAreas.

3.2.2 ApplicabletopicsfromACAD93-008areincludedinSTERP2.04.

3.3 STERP3.05–ControlAccessintoLockedHighRadiationAreas

3.3.1 ThisCIRPTaskenablesatraineetoperformthefollowingactivitiesperNISP-RP-05,AccessControlsforHighRadiationAreas:

• BriefforanLHRAEntry• IssueaKeytoAccessanLHRA• TransferPossessionofanIssuedLHRAKey• TerminateAccessintoanLHRAandReturntheKey

3.3.2 ApplicabletopicsfromACAD93-008areincludedinSTERP2.05.

3.4 STERP3.06–UnconditionallyReleasePersonnelFollowingValidPersonnelContaminationMonitorAlarms

3.4.1 ThisCIRPTaskenablesatraineetoperformthefollowingactivitiesperNISP-RP-06,PersonnelContaminationMonitoring:

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page35of48

• PersonnelDecontamination• DoseAssessmentandDocumentation• EvaluatePersonnelforUnconditionalReleasefollowingPersonnelContamination

3.4.2 ApplicabletopicsfromACAD93-008areincludedinSTERP2.06.

3.5 STERP3.07–UnconditionallyReleaseMaterialsfromanRCA

3.5.1 ThisCIRPTaskenablesatraineetoperformthefollowingactivitiesperNISP-RP-07,ControlofRadioactiveMaterial:

• ReleaseofNon-PersonalItems• ReleaseofLiquids• ReleaseofBulkorAggregateMaterials• ControlofRadioactiveMaterialTemporarilyReleased

3.5.2 ApplicabletopicsfromACAD93-008areincludedinSTERP2.07.

3.6 STERP3.09–ProvideJobCoverageforRadiography

3.6.1 CIRPTaskRP3.10isaprerequisiteforcompletingthisCIRPTask.ThisCIRPTaskenablesatraineetoperformthefollowingactivitiesperNISP-RP-09,Radiography:

• SurveyandStoreaRadiographySource• ReviewtheRadiographyShotPlan• PreparefortheRadiographyShot• MonitortheRadiographyShot• RestoreArea• EmergencyResponseActions

3.6.2 ApplicabletopicsfromACAD93-008areincludedinRP2.10andRP3.10.

3.7 STERP3.10–PerformMediumandHighRiskRadiologicalJobCoverage

3.7.1 ThisCIRPTaskenablesatraineetoperformthefollowingactivitiesperNISP-RP-10,RadiologicalJobCoverage:• PerformJobCoverageforActivitieswithMediumorHighRadiologicalRisk• TrackStayTime

3.7.2 ApplicabletopicsfromACAD93-008include:

• Identifytheprejobradiologicalsurveyrequirementsfortheworkoperationtobeperformed.Basedontheresultsoftheprejobsurveysandthescopeofwork,identifyorevaluatetheneedforaformalALARAreview,prejobbriefingswithworkers,typeandlocationofwhole-bodydosimeters,multiplewhole-bodydosimeters,extremitydosimeters,protectiveclothingrequirements,respiratoryprotectionrequirements,specialprecautionsorconditionstominimizethespreadofcontamination,reduceexposure,orminimizeairbornecontamination,degreeofRPTs'on-the-jobcoverage,in-processradiologicalsurveystobeperformed,radiologicalholdpoints,andelectronic,secondarydosimetersetpoints.

• DescribehowtheresultsofALARAreviewsareimplemented,includingdocumentationrequired,mandatoryversussuggestedtechniques,technicianand

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page36of48

workerauthorityandprocedureformodifyingrequirements,andresponsibilityforimplementation.

• Explainhowthetypeandlocationofwhole-bodydosimetryaredeterminedbasedonbodypositionanddoserategradient.

• Identifythecriteriausedtodeterminetheneedformultiplebadgingorforextremitymonitoring.

• Identifymeasurestotakewhenprotectiveclothingisusedinconditionsthatcouldresultinheatstress.

• Identifyandexplainthefactorsthatdeterminetheneedforandtypeofrespiratoryprotectionequipmenttobeusedduringradiologicalwork,suchasthelevelsofairborneradioactivity,typeofairborneradioactivity(particulateversusgas),levelsofcontaminationintheworkarea,whetherworkareaiswetordry,assignedprotectionfactoroftherespiratoryprotectionequipment,durationofthejob,typeofworkbeingperformed(forexample,welding,grinding,cutting),impactofdecreasedworkerefficiencyduetorespiratoruseresultinginincreasedwhole-bodydose,applicabilityofportableventilationinlieuofrespiratoruse,andalphaclassification.

• Discussproperjobcoverageandradiologicalprotectionmeasuresforhigh-exposurejobsandpotentialhigh-exposurejobs,suchassteamgeneratormaintenance(PWR),reactorcoolantpumpsealreplacement(PWR),reactorwatercleanuppumpmaintenance(BWR),recirculationpumpsealreplacement(BWR),controlroddriverebuild(BWR),divingoperations,spentresintransferoperations,spentfuelmovements,in-coredetectormaintenance,andworkinoraroundspentfuelpool.

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page37of48

Attachment2:PADSCodesforCIRPTaskQualifications

JUNIORQUALIFICATIONS• RPFUN1 RPTheoryFundamentalsforJuniorTaskQualifications1• RP2.01 OperatePortableRadiologicalSurveyInstruments• RP2.02 PerformRadiationandContaminationSurveys• RP2.03 CollectandEvaluateRadiologicalAirSamples• RP2.04 PostLowLevelRadiologicalHazards• RP2.05 ControlAccessintoHighRadiationAreas• RP2.06 MonitorforPersonnelContamination• RP2.07 ControlRadioactiveMaterialWithinanRCA• RP2.08 ControlHEPAVacuumsandVentilationEquipment• RP2.10 PerformLowRiskRadiologicalJobCoverage• RPCONT ContinuingTrainingforSupplementalRPTechnicians• JRTECH PrerequisitesforJuniorTechnicianPositionQualificationComplete

SENIORQUALIFICATIONS• RPFUN2 RPTheoryFundamentalsforSeniorTaskQualifications2

• RP3.04 PostaHighRadiationAreaorLockedHighRadiationArea! ExpiresifRPCONTnotcompletedinpreviousorcurrentcalendaryear

• RP3.05 ControlAccessintoLockedHighRadiationAreas! ExpiresifRPCONTnotcompletedinpreviousorcurrentcalendaryear

• RP3.06 UnconditionallyReleasePersonnelFollowingValidContaminationMonitorAlarms! ExpiresifRPCONTnotcompletedinpreviousorcurrentcalendaryear

• RP3.07 UnconditionallyReleaseMaterialsfromanRCA! ExpiresifRPCONTnotcompletedinpreviousorcurrentcalendaryear

• RP3.09 ProvideJobCoverageforRadiography! ExpiresifRPCONTnotcompletedinpreviousorcurrentcalendaryear

• RP3.10 ProvideMediumandHighRiskRadiologicalJobCoverage! ExpiresifRPCONTnotcompletedinpreviousorcurrentcalendaryear

• AN18.1 ANSI18.1Experience• AN3.1 ANSI3.1Experience• RPCONT ContinuingTrainingforSupplementalRPTechnicians

1ThisqualificationisaprerequisitetocompletingthejuniorlevelSTEs.ThiscodeissatisfiedwithsuccessfulcompletionoftheNUFexampriortoJanuary2018ortherevisedRPFUN1fundamentalscoursescheduledforimplementationinJanuary2018.

2ThisqualificationisaprerequisitetocompletingtheseniorlevelSTEs.ThiscodeisalsosatisfiedwithsuccessfulcompletionoftheNUFexamwithinthe5yearperiodpriortoJanuary1,2018ortherevisedRPFUN2fundamentalscoursescheduledforimplementationinJanuary2018.

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page38of48

Attachment3:EquivalencyofNEIRPTSkillstoCIRPTaskQualifications

CIRP Task # CIRP Task Title Equivalent NEI RPT Skills

RP2.01 Operate Portable Radiological Survey Instruments RPT001 – Operation of Survey Instruments (Ion Chambers, Geiger-Mueller, Extendable Probe Instruments, and Count Rate Meters (Friskers)

RP2.02 Perform Radiation and Contamination Surveys RPT001 – Operation of Survey Instruments (Ion Chambers, Geiger-Mueller, Extendable Probe Instruments, and Count Rate Meters (Friskers) RPT002 – Perform Radiation and Contamination Surveys

RP2.03 Collect and Evaluate Radiological Air Samples RPT001 – Operation of Survey Instruments (Ion Chambers, Geiger-Mueller, Extendable Probe Instruments, and Count Rate Meters (Friskers) RPT003 – Perform Airborne Radioactivity Survey RPT005 – Radiological Posting/Deposting RPT006 – Respond to Radiological Alarms (e.g. CAM, ARM, PCM, and Dosimetry) RPT007 – Operate Continuous Air Monitors (CAMs)

RP2.04 Post Low Level Radiological Hazards RPT002 – Perform Radiation and Contamination Surveys RPT005 – Radiological Posting/Deposting

RP2.05 Control Access to High Radiation Areas RPT008 – Provide Radiological Job Coverage RPT013 – Monitor and Coach Workers in the RCA Including Their Ingress and Egress

RP2.06 Monitor for Personnel Contamination RPT001 – Operation of Survey Instruments (Ion Chambers, Geiger-Mueller, Extendable Probe Instruments, and Count Rate Meters (Friskers) RPT002 – Perform Radiation and Contamination Surveys RPT006 – Respond to Radiological Alarms (e.g. CAM, ARM, PCM, and Dosimetry)

RP2.07 Control Radioactive Material Within an RCA RPT001 – Operation of Survey Instruments (Ion Chambers, Geiger-Mueller, Extendable Probe Instruments, and Count Rate Meters (Friskers) RPT002 – Perform Radiation and Contamination Surveys RPT004 – Radioactive Material Movement and Storage on Owner-Controlled Property (Does not include 49 CFR shipping criteria) RPT005 – Radiological Posting/Deposting

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page39of48

CIRP Task # CIRP Task Title Equivalent NEI RPT Skills

RP2.08 Control HEPA Vacuums and Ventilation Equipment

RPT001 – Operation of Survey Instruments (Ion Chambers, Geiger-Mueller, Extendable Probe Instruments, and Count Rate Meters (Friskers) RPT002 – Perform Radiation and Contamination Surveys RPT003 – Perform Airborne Radioactivity Survey RPT005 – Radiological Posting/Deposting RPT014 – Operation of HEPA Vacuum and/or Ventilation Equipment

RP2.10 Perform Low Risk Radiological Job Coverage RPT001 – Operation of Survey Instruments (Ion Chambers, Geiger-Mueller, Extendable Probe Instruments, and Count Rate Meters (Friskers) RPT002 – Perform Radiation and Contamination Surveys RPT003 – Perform Airborne Radioactivity Survey RPT006 – Respond to Radiological Alarms (e.g. CAM, ARM, PCM, and Dosimetry) RPT008 – Provide Radiological Job Coverage RPT010 – Direct/Perform Area and Equipment Decontamination RPT013 – Monitor and Coach Workers in the RCA Including Their Ingress and Egress

RP3.04 Post a High Radiation Area, Locked High Radiation Area, or Very High Radiation Area

RPT002 – Perform Radiation and Contamination Surveys RPT005 – Radiological Posting/Deposting

RP3.05 Control Access into Locked High Radiation Areas

RPT001 – Operation of Survey Instruments (Ion Chambers, Geiger-Mueller, Extendable Probe Instruments, and Count Rate Meters (Friskers) RPT002 – Perform Radiation and Contamination Surveys RPT008 – Provide Radiological Job Coverage RPT009 – Provide High Risk Radiological Job Coverage

RP3.06 Unconditionally Release Personnel Following Valid Contamination Monitor Alarms

RPT001 – Operation of Survey Instruments (Ion Chambers, Geiger-Mueller, Extendable Probe Instruments, and Count Rate Meters (Friskers) RPT002 – Perform Radiation and Contamination Surveys RPT006 – Respond to Radiological Alarms (e.g. CAM, ARM, PCM, and Dosimetry) RPT012 – Personnel Decontamination

RP3.07 Unconditionally Release Materials from an RCA

RPT001 – Operation of Survey Instruments (Ion Chambers, Geiger-Mueller, Extendable Probe Instruments, and Count Rate Meters (Friskers) RPT002 – Perform Radiation and Contamination Surveys RPT011 – Survey Material for Unconditional Release

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page40of48

CIRP Task # CIRP Task Title Equivalent NEI RPT Skills

RP3.09 Provide Job Coverage for Radiography

RPT001 – Operation of Survey Instruments (Ion Chambers, Geiger-Mueller, Extendable Probe Instruments, and Count Rate Meters (Friskers) RPT002 – Perform Radiation and Contamination Surveys RPT003 – Perform Airborne Radioactivity Survey RPT006 – Respond to Radiological Alarms (e.g. CAM, ARM, PCM, and Dosimetry) RPT008 – Provide Radiological Job Coverage RPT009 – Provide High Risk Radiological Job Coverage RPT010 – Direct/Perform Area and Equipment Decontamination RPT013 – Monitor and Coach Workers in the RCA Including Their Ingress and Egress

RP3.10 Provide Medium and High Risk Radiological Job Coverage

RPT001 – Operation of Survey Instruments (Ion Chambers, Geiger-Mueller, Extendable Probe Instruments, and Count Rate Meters (Friskers) RPT002 – Perform Radiation and Contamination Surveys RPT003 – Perform Airborne Radioactivity Survey RPT006 – Respond to Radiological Alarms (e.g. CAM, ARM, PCM, and Dosimetry) RPT008 – Provide Radiological Job Coverage RPT009 – Provide High Risk Radiological Job Coverage RPT010 – Direct/Perform Area and Equipment Decontamination RPT013 – Monitor and Coach Workers in the RCA Including Their Ingress and Egress

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page41of48

Attachment4:SupplierTrainingEquivalencyEvaluation

ThisformisusedbysupplierstodocumentthebasisforexemptingatechnicianfromcompletingthetrainingcoursesrequiredforaCIRPTask.Exemptionsgrantedbyutilitypersonnelshouldbeperformedpersitetrainingprocedures.TechnicianName: Date:

Last4DigitsofSocialSecurityNumber:

CourseEvaluated:

" RPFundamentalsforJuniorTaskQualifications" RPFundamentalsforSeniorTaskQualifications" RPContinuingTraining:" CIRPTaskNumberandTitle:

BasisforTrainingExemption MethodUtilized(Checkallitemswhichapply) (Checkallitemswhichapply)

" EquivalentTraining " ReviewofTrainingRecords

" Education " TechnicalInterview(AttachDocumentation)

" WorkExperience

DescriptionofRationale(Justifygrantingcreditwithabasisandattacheddocumentationshowingthatenablingobjectiveshavebeenachieved.)

Performedby: Date: Print&Sign

Approvedby: Date: Print&Sign

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page42of48

Attachment5:CreditedExperienceforANSIQualification

TechnicianName(Print):

Last4DigitsofSocialSecurityNumber:

Job/ExperienceType MaxAllowableCredit

(Hrs)–Note1CreditedExperience

(Hrs)–Note2NavyELT(overhaul) NoLimit

Shipyard/TendersRadCon(NAVSEA108Certification) NoLimit

FuelReprocessing/PlutoniumProduction NoLimit

NPPSr.orJr.RPTech NoLimit

RadioactiveFacilityDecommissioning–Note3 NoLimit

NationalLaboratory–Note4 NoLimit

NPPRPTechInstructor(n/atoANSI18.1) 2,000

RelatedTechnicalTraining(n/atoANSI18.1) 2,000

NavyELT(non-overhaul)CreditforANSI18.1 1,000

NavyELT(non-overhaul)CreditforANSI3.1 2,000

NPPDosimetryTech 1,000

NPPRespiratoryProtectionTech 1,000

NPPCountRoomTech 1,000

NPPRadiochemistryTech 1,000

NPPGETRPInstructor(n/atoANSI18.1) 1,000

NPPDecon(meterqualified) 1,000

NPPControlPointMonitor 500

NPPLaundryMonitor 500

MiscellaneousRPWorkatOtherFacilities–Note4 500

Total=

Note1:ThemaximumamountofexperiencethatcanbecreditedtowardtheexperiencerequirementsinANSI18.1orANSI3.1.Note2:RecordthenumberofhoursofexperiencethatcanbecreditedtowardsANSIexperiencerequirements.Nomorethan50hoursperweekcanbecreditedforworkingexperience.Nomorethan40hoursperweekcanbecreditedforrelatedtechnicaltraining.Donotrecordvaluesgreaterthanthemaximumallowablecreditslistedintheprecedingcolumn.Note3:Creditedexperiencemustinvolveresponsibilitiesforradiologicaljobcoverageduringactivedecommissioning,i.e.dismantlingradioactivesystemsandcomponents.Note4:Creditedexperiencemustinvolveradiationprotectionresponsibilitiesforworkactivitiesandradiologicalconditionssimilartothatencounteredinanuclearpowerplant.Icertifytheaboveindividualhasaminimumof6monthsexperienceprovidingradiologicalsurveillanceandcontrolofactivitiesinradiologicalconditionssimilartothatencounteredinanuclearpowerplantANDmeetstherequirementsfor:"ANSI18.1"ANSI3.1 ApprovalPrint&Sign: Date: AttachResume

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page43of48

Attachment6:TrainingFeedback–Sample

CourseorSTE: Date:

Feedback:

Submittedby(optional):

PleasePrint

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page44of48

Attachment7:PADSTransitionPlanThisdocumentliststhesequenceofactionsrequiredtotransitionfromthecurrentNEIRPTSkillstotheCIRPTaskqualificationsusingPADStotracktechnicianqualifications.TheseinstructionswillenablereviewstoidentifytheseniortechnicianswhodonothavetherequiredqualificationsshowninPADSpriortoadoptingtheCIRPTaskqualificationsin2018.ActionsmaythenbetakentoensurequalifiedseniortechnicianhaveaccuratequalificationslistedinPADS.

Action Performer Date

1. EstablishEB17-01codesforRPtechniciansinPADSperAttachment2. BKelm Complete

2. ReviseutilityLMSprogramsperEnclosure1toprovidecommonqualificationreports.

AllSites On-Going

3. Inputacontinuingtraining,RPCONT,dateof12/1/2016forsupplementalRPtechnicianstoenablereportsfortestingandevaluationduring2017.3

BKelm Complete

4. ProvidealisttoBobKelmofANSI3.1qualifiedtechniciansandanotherlistforANSI18.1qualifiedtechnicians.

Suppliers Complete

5. UpdatetheAN18.1andAN3.1experiencecodesforRPtechniciansinPADS.

BKelm Complete

6. EstablishthereportingcapabilityshownbytheexamplesinEnclosures2and3fromPADS.

BKelm Complete

7. UsereportstoidentifytechnicianswhoareANSIqualifiedbutarenotreflectedassuchinthePADSreports.Resolveconflictsasneeded.

Suppliers On-Going

8. EvaluatelessonslearnedinusingPADStoidentifychangesneededtoimprovequalificationtrackingforsupplementalpersonnelandsubmitanECNtodrivethechangesandneededschedule.

BKelmITOC

July20,2018

3ThisdatewillcauseANSIpositionqualificationstoexpireattheendof2017untilNISPgaptraininghasbeencompletedaspartofthe2017/2018continuingtraining.

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page45of48

Enclosure1:InstructionstoUpdateUtilityLMSPrograms1. EnterthefollowingPADScodesintheutilityLMSprogramtocorrespondtotheRadiationProtection

Technician(RPT)SkillslistedinNEI03-04,AppendixD:• RPT001—OperationofSurveyInstruments(IonChambers,Geiger-Mueller,ExtendableProbeinstruments),andCountRateMeters(Friskers)

• RPT002—PerformRadiationandContaminationSurveys• RPT003—PerformAirborneRadioactivitySurvey• RPT004—RadioactiveMaterialMovementandStorageonOwner-ControlledProperty,(Doesnotinclude49CFRshippingcriteria)

• RPT005—RadiologicalPosting/Deposting• RPT006—RespondtoRadiologicalAlarms(e.g.,CAM,ARM,PCM,andDosimetry,etc.)• RPT007—OperateContinuousAirMonitors(CAMs)• RPT008—ProvideRadiologicalJobCoverage• RPT009—ProvideHighRiskRadiologicalJobCoverage• RPT010—Direct/PerformAreaandEquipmentDecontamination• RPT011—SurveyMaterialforUnconditionalRelease• RPT012—PersonnelDecontamination• RPT013—MonitorandCoachWorkersintheRCAIncludingTheirIngressandEgress• RPT014—OperationofHEPAVacuumand/orVentilationEquipment• RPT015—RemoteRadiologicalMonitoring

2. ForeachPADScodeabove,entertheutility-specificcoursesascomponents,includingTPE,thataccomplishtheobjectives(i.e.stepsandperformancestandards)listedforeachNEIRPTSkillinNEI03-04,AppendixD.a. Theutility-specificcoursesshouldencompasstheNEIobjectivesataminimum,i.e.thesite-specific

coursesshouldbeascloseaspossibletotheNEIobjectivesbutmayhaveadditionalrequirementsasrequiredbytheutilitytoperformthetask.

3. EntertheCIRPTaskqualificationcodesfromAttachment2intheutilityLMSprogram.a. ForeachCIRPTaskqualificationcode,entertheequivalentNEISkillsthatfulfilltherequirementsfor

theCIRPTaskqualificationaslistedinAttachment3.

b. ForseniortechnicianCIRPTaskqualificationsbeginningwithRP3,expireeachqualificationunlessRPCONThasbeencompletedduringthepreviousorcurrentcalendaryear.

4. EnterthefollowingcoursesintheutilityLMS:

• RPFUN1–RPFundamentalsforJuniorTaskQualifications! Thiswillbeanewcoursethatisscheduledforimplementationin2018.! CompletionoftheNUFcourseisequivalent.

• RPFUN2–RPFundamentalsforSeniorTaskQualifications! Thiswillbeanewcoursethatisscheduledforimplementationin2018.! CompletionoftheNUFcourseisequivalent.

• AN18.1–ANSI18.1Experience! CompletionwillbeenteredinPADSbysuppliersandtransferredtotheutilityLMS.

• AN3.1–ANSI3.1Experience! CompletionwillbeenteredinPADSbysuppliersandtransferredtotheutilityLMS.

• RPCONT–ContinuingTrainingforSupplementalRPTechnicians

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page46of48

! CompletionwillbeenteredinPADSbysuppliersandtransferredtotheutilityLMS.• NUF–RPFundamentalsInitialandRequalificationExam

! CurrentPADSandNANTeLdesignationis2023,RPFundamentalsInitialExamand5261,RPFundamentalsRequalExam

5. EstablishthefollowingjobqualificationtitlesintheutilityLMS.a. JuniorRPTechnician–Requiredcomponentsare:

! RPFUN1! RP2.01throughRP2.08andRP2.10! RPCONT! JRTECH

b. ANSI18.1SeniorRPTechnician–Requiredcomponentsare:! RequiredcomponentsforJuniorRPTechnician! RPFUN2! RP3.04throughRP3.07,RP3.09,andRP3.10! AN18.1! CompletionofRPCONTduringthepreviousorcurrentcalendaryear

c. ANSI3.1SeniorRPTechnician–Requiredcomponentsare:! RequiredcomponentsforANSI18.1SeniorRPTechnician! AN3.1

6. Atthispoint,theutilityLMSshouldprovidethesamereportingcapabilityasshowninEnclosures2and3.

7. EstablishalocalbatchinterfacewithPADSperNEI03-06,ElectronicSystemTechnicalDocumentationManualtoprovidetwo-waydatamovementbetweentheLMSandPADSforthePADScodeslistedinAttachment1.

a. EntertheidentificationnumbersofsupplementalRPtechnicianscurrentlyintheLMSforthelocalbatchinterface.

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page47of48

Enclosure2:RPTechnicianIndividualQualificationReportName:________________________________ Identification:_________________

PositionQualification:TASKONLY4orJRTECH5orANSI18.1SRTECH6orANSI3.1SRTECH7

QualificationDetails8(example)

Code Description DateEnteredEntered

ByRPFUN1 RPFundamentalsforJuniorTaskQualifications 03/20/2015 TVABRFRPFUN2 RPFundamentalsforSeniorTaskQualifications 03/20/2015 TVABRFRP2.01 OperatePortableRadiologicalSurveyInstruments 05/15/2017 BHIRP2.03 CollectandEvaluateRadiologicalAirSamples 06/03/2017 DZRP2.06 MonitorforPersonnelContamination 09/10/2017 FPLTPSRPCONT RPTechContinuingTraining 11/11/2017 APSPAVAN18.1 TwoYearsofRPExperience 03/16/2018 RSCS

4Technicianmayonlyworkinapositionthatperformsthespecifictasksforwhichqualificationhasbeenachieved.5RequiresRP2.01throughRP2.08,RP2.10:TechnicianmayperformtasksnotrequiringANSIqualification.6RequiresallRPCodes,RPCONTCompletedinCurrentorPreviousCalendarYear,andAN18.17RequiresallRPCodes,RPCONTCompletedinCurrentorPreviousCalendarYear,andAN3.18ListEachCodeCompleted,EntryDate(onlymostrecent),andCompanyWhoEnteredData.

NuclearIndustryStandardProcessTrainingandQualificationofSupplemental

RPTechnicians

Document#:NISP-RP-12

Revision:1.0

EffectiveDate:12-11-2017

Page48of48

Enclosure3:BatchQuery–RPTechnicianPositionQualificationReport9

Name IDNumber PosQual10LastRP

CONTDate11

9Thisreportprovidesthestatusformultipleindividualsasselectedforthequery.10ThehighestpositionqualificationmetonthedateofthebatchqueryusingcriteriafromAttachment3.11ThelastdatewhenRPcontinuingtrainingwascompleted.