NIL NIL - SELECT-SAN.RUselect-san.ru/upload/Catalogue_2009.pdf · DIN 4109 - Test registration no....

• NILplus WC flushers for concealed and exposed installation• WC flushers for normal and low-pressure applications• WC flusher sets• Flush pipes and accessories for WC flushers • Supply stops - 9

• NILplus urinal flushers for concealed and exposed installation• Urinal flushers and urinal inlet-bows

• Accessories for urinal flushers Page 10 - 13

• Self-closing straight-way valves for shower systems

• NILplus water-saving shower sets Page 14 - 18• Accessories for shower sets• Foot-spraying equipment for exposed and semi-concealed installation

• Design angle valve series• NILplus angle valves with and without your personal company's logo• NILplus slanted seat valves Page 19 - 23

• Concealed valves (with internal threads or soldering connections)• Accessories for concealed valves

• Threaded nipples • Reduction pieces• Pipe couplings • Angled couplings• T - couplings• Forked fittings• Wall unions Page 37 - 43

• Compression fittings• ELB - compression fittings• Screw fittings• Threaded rosettes• Sliding rosettes Page 44 - 47

• Copper pipes

• Coils of copper pipes• Flexible connection hoses Page 48 - 53 ( hygienically tested and non-twistable)

03/2009

Product Catalogue

• Combined angle valves • Hose-taps • Slanted-seat hose taps • Draw-off taps • Pipe ventilation devices • Anti hose-burst devices • Accessories for combined anglevalves • Frost-proof draw-off taps Page 24 - 31

Page 32 - 36

NIL

Tabl

e of

Con

tent

s

Friedrich Gampper KGFichtestrasse 871540 Murrhardt

Germany

Fon + 49 - 7192 - 971 - 0Fax + 49 - 7192 - 971 - 105mail: [email protected]: www.nil-gampper.de

Material Quality

Surface Finish

Food Laws

DIN Conformity

We give the following warranty on all NIL fittings:

3 Years Warranty

This warranty does not cover the following:

2. Malfunctioning due to dirt in the water mains.

Your Advantage - The Wide Range of Reliable NIL Fittings

1. Defects arising due to incorrect installation, usage, unauthorized repair orfrost-damage.

3. Indirect claims for damages which occur as the result of a defectivefitting.

Adherence to prevailing regulations and correct handling of NIL fittings will guarantee you years of trouble-free usage.

Decades of experience in the manufacture of high-quality sanitary fittings and clear and well thought-outdesigns combined with the most up-to-date production and quality control methods guarantee the high qualitystandards of all NIL fittings.

commencing from the date of delivery. Should during this period undernormal circumstances, defects arise due to a material or production fault,then the defective fitting will either be repaired at our factory or replacedfree-of-charge.

NIL fittings which are visible after installation are given a special surfacefinish: Brass, which is ground, polished and either nickel- or chrome-plated.The non-visible parts of fittings for concealed installation have either a mattfinish, or can be nickel- or chrome-plated according to individualrequirements. Certain NIL fittings are also available, on request, in sanitarycolors.

NIL fittings conform to existing food laws, even if other productionmaterials are employed (seals, etc.).

NIL fittings conform to DIN standards, as far as these are applicable. Suchstandards relate to dimensions, hydraulic function and noise levels. Fittingstested according to these standards are marked accordingly. A continuousquality of all NIL products guarantees the highest quality standardpossible.

High Quality Materials and Manufacturing MethodsNIL fittings are generally made of hot-pressed brass manufacturedaccording to German industrial standards. Consequently they meet thedemands of highest quality in respect of solidity and water-tightness. Bodysections made by the chilled casting method are subjected to a particularlystringent water-tightness test.

3 Years Warranty

NILplus Toilet Flusher With Self-Cleaning Jet BoreThread Size Order-

No. Surface

WC - Flusher Model: NILplus 2001 DN 20 3/4" 2001

Din 3265 - Test registration no.DIN DVGW 449

DIN 4109 - Test registration no. DN 20 3/4" 2001-01P - IX 2716 / I

Group of Fittings I

With NILplus automatic flush system DN 20 3/4" 2001-51 whiteand individual flush control

Flow-pressure 1.2 - 4.0 bar

Outlet pipe according to DIN 3265 forflush-pipe ø 28 x ø 26 mm, incl. wall rosetteø 67 mm

Suitable for wash-out and wash-down WC´s

German patent no. 3 427 336German design reg. No. 363

Flush volume and flush rate adjustable !!!Spare / Replacement parts: 2001/10KCap and outlet nut(velours-chrome parts are non-returnable)

WC - Flusher Set model: NILplus 2001 DN 20 3/4" 2001S

consisting of:

WC - flusher model: NILplus 2001+ brass flus pipe ø 28 x ø 26 x 600 x 200 mm,straight type, chrome-plated

+ WC - connector ø 55 mm for pedestal WC

Polished-chrome / velours-chrome

Article Description


Polished-chrome / white

velours-chrome

1

NIL Toilet Flusher With Self-Cleaning Jet BoreThread Size Order-

No. Surface

WC - Flusher Model: NILplus 2002 DN 20 3/4" 2002

DIN 3265 - Test registration no. 1032

DIN 4109 - Test registration no. DN 20 3/4" 2002-01P - IX 3597 / II

Group of Fittings II

With NILplus automatic flush system and individual flush control

Flow-pressure 1.2 - 4.0 bar

Outlet pipe according to DIN 3265 for flush pipe ø 28 x ø 26 mm, incl. wall rosette ø 67 mm


Flush volume and flush rate adjustable !!!

WC - Flusher Set model: NILplus 2002 DN 20 3/4" 2002S1

consisting of:

WC - flusher model: NILplus 2002+ white plastic flush-pipe ø 28 x ø 26 x 700 x 250 mm, straight type+ WC - connector ø 55 mm for pedestal WC

WC - Flusher Set model: NILplus 2002 DN 20 3/4" 2002S2

consisting of:

WC - flusher model: NILplus 2002+ brass flush-pipe,ø 28 x ø 26 x 600 x 200 mmstraight type, chrome-plated

+ WC - connector ø 55 mm for pedestal WC


Article Description




2

Toilet FlusherThread Size Order-

No. Surface

WC - Flusher Model: D 69 DN 20 3/4" 122 chrome-DIN 3265 - Test registration no. platedDIN DVGW 514Testing applied for DIN EN 12541 forWC and urinal flusher

Flow pressure 1.2 - 4.0 bar

Solder fitting according to DIN 3265 for flush pipe ø 28 x ø 26 mm

Suitable for wash-out and wash-down WCs

Flush volume and flush rate adjustable !!!

WC - Flusher Set model: NIL D 69 DN 20 3/4" 122S1 chrome-plated

consisting of: Flush pipe:

whiteWC - flusher model: NIL D 69+ white plastic flush-pipe,ø 28 x ø 26 x 700 x 250 mm, straight type+ WC - connector ø 55 mm for pedestal WC

WC - Flusher Set model: NIL D 69 DN 20 3/4" 122S2 chrome-plated

consisting of:

WC - flusher model: NIL D 69+ brass flush-pipe ø 28 x ø 26 x 600 x200 mm, straight type, chrome-plated

+ WC - connector ø 55 mm forpedestal WC

Article Description

3

Toilet Flusher also for Low-Pressure Applications and SeawaterThread Size Order-

No. Surface

WC - Flusher Model: D 69 - 3/4" DN 20 3/4" 122-ND chrome-for low-pressure applications plated

Flow pressure: 0.6 - 2.5 bar

Solder fitting, flush pipe ø 30 x ø 28 mmø 32 x 30 mmSuitable for wash-down and siphonic WC´s

WC - Flusher Model: A 32 - 1" DN 25 1" 310 chrome-for low-pressure applications plated


Solder fitting, flush pipe ø 32 x ø 30 mm DN 25 1" 311 chrome-plated

Suitable for wash-down and siphonic Sea-waterWC´s, WC systems with water proofsupplied from header tanks.

WC systems on ships(Sea-water proof version)

Article Description

4

Accessories for Toilet FlushersThread Size Order-

No. Surface

Flush Pipes for WC Flushers DN 20 3/4"Brass

ø 28 x ø 26 x 600 x 200 mm straight 160ø 28 x ø 26 x 600 x 200 mm, 45 mm cranked 161ø 28 x ø 26 x 600 x 200 mm, 85 mm cranked 162ø 28 x ø 26 x 600 x 250 mm straight 163ø 28 x ø 26 x 600 x 250 mm, 45 mm cranked 164ø 28 x ø 26 x 600 x 250 mm, 85 mm cranked 165ø 28 x ø 26 x 700 x 200 mm straight 166ø 28 x ø 26 x 700 x 200 mm, 45 mm cranked 167ø 28 x ø 26 x 700 x 200 mm, 85 mm cranked 168ø 28 x ø 26 x 700 x 250 mm straight 169ø 28 x ø 26 x 700 x 250 mm, 45 mm cranked 170ø 28 x ø 26 x 700 x 250 mm, 85 mm cranked 171

Angled flush pipesø 28 x ø 26 mm, 45° 204ø 28 x ø 26 mm, 90° 191ø 28 x ø 26 mm, 130° 203

Flush Pipe Extensionsø 28 x ø 26 x 250 mm long 192ø 28 x ø 26 x 500 mm long 193

Flush Pipes for WC Flushers DN 20 3/4"Plastic, white or black

ø 28 x ø 26 x 700 x 250 mm straight 172 white/blackø 28 x ø 26 x 700 x 250 mm, 40 mm cranked 173 white/blackø 28 x ø 26 x 700 x 250 mm, 85 mm cranked 184 white/black

Angled flush pipesø 28 x ø 26 mm, 45° 194 white/blackø 28 x ø 26 mm, 90° 195 white/blackø 28 x ø 26 mm, 130° 196 white/black

Flush Pipe Extensionsø 28 x ø 26 x 250 mm long 197 white/blackø 28 x ø 26 x 500 mm long 198 white/black

Article Description

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

5

Accessories for Toilet FlushersThread Size Order-

No. Surface

Flush Pipes for WC Flushers DN 25 1"Brass

ø 30 x ø 28 x 600 x 200 mm straight 182ø 32 x ø 30 x 600 x 200 mm straight 174ø 32 x ø 30 x 600 x 200 mm cranked 175ø 32 x ø 30 x 600 x 250 mm straight 176ø 32 x ø 30 x 600 x 250 mm cranked 177ø 32 x ø 30 x 700 x 200 mm straight 178ø 32 x ø 30 x 700 x 200 mm cranked 179ø 32 x ø 30 x 700 x 250 mm straight 180

ø 32 x ø 30 x 700 mm straight , for 183squatting type WCø 32 x ø 30 x 1000 mm straight , for 205squatting type WC

Flush Pipes for WC Flushers DN 25 1"Plastic, white or black

ø 32 x ø 30 x 700 x 200 mm straight 199 white/black201 white/black

Flush Pipe Clamp 189

as above 189-51 white

Connecting Bush 190for flush pipe ø 28 x ø 26 mm

185

186

187

188

Article Description

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

ø 32 x ø 30 x 700 x 200 mm, 65 mmcranked

for flush pipe ø 28 mm, for distance fromwall of 15 - 85 mm, incl. masonry plug

chrome-plated

Compression fitting between flusher outletpipe and flush pipe

chrome-plated

WC - Connector for flush pipe ø 28 x ø 26mm and ø 32 x ø 30 mm, for WC - inlet ø 55mm (Euro - Norm)

as above, however with chrome-platedrosette

chrome-plated

WC - Connector for flush pipe ø 28 x ø 26mm and ø 32 x ø 30 mm, for WC - inlet ø 48mm (old type)

as above, however with chrome-platedrosette

chrome-plated

6

Toilet Flusher for Concealed Installation - With Self-Cleaning Jet Bore

Thread Size Order-No. Surface

WC Flusher for concealed installation DN 20 3/4" 2001UPModel: NILplus 2001DIN 3265 - Test registration no. DIN DVGW 449

DIN 4109 - Test registration no. P - IX 2716 / I

Group of fittings IWith NILplus automatic flush system and individual

flush control


Outlet pipe according to DIN 3265 for flush pipe ø

28 x ø 26 mm


Scope of delivery:

Suitable for water inlet fittings ø 45 mm for wall-

mounted WC (order-no. 248/2), or for pedestal WC

(order-no. 248/1).

Height adjustment range: 600 ± 20 mm

Polystyrene jacket, temporary polystyrene covers

for inlet fittings.

Excluding cover plate, operating button and water inlet fittings.Please order separately before completion.

Cover Plate 2500

Concealed flush pipe 248ø 28 x ø 26 mm


Polystyrene jacket, temporary polystyrene cover

Water inlet fitting for pedestal WC 248/1 White

Please order separately before completion !

Water supply fitting for wall mounted WC 248/2 WhiteInlet pipe ø 45 mm, 180 mm long, WC - connector


Not included in the scope of delivery of the aboveflusher model: 2001UP !

Brushed stainless steel

Incl. Operating button for concealed flusher model:NILplus 2001, installation frame and fixing screws.

(PLEASE NOTE: The concealed flush pipe isalready included in the scope of delivery of theflusher 2001UP. If otherwise required, you mayalso order it separately).

WC flusher with 3/4" screw connection; sound-proofinstallation case 214 x 180 x 83 mm deep; temporarypolystyrene cover for installation case, concealed flushpipe ø 28 x ø 26 mm.

Inlet pipe ø 45 mm, 300 mm long, WC - connector,wall rosette

Article Description


Concealed part

Cover plate

7

Toilet Flusher for Concealed Installation - With Self-Cleaning Jet Bore


WC flusher for concealed installation DN 20 3/4" 320

Model: UPD 32

Flow pressure: 1,2 - 5,0 bar


Optional installation to the left or right side

Scope of delivery:WC flusher with 3/4" screw connection, installation

case size: 100 x 122 x 66 mm (wxhxd)

Temporary polystyrene cover for installation case

Suitable for water inlet fittings ø 45 mm for wall-

mounted WC (order-no. 248/2) or pedestal WC

(order-no. 248/1)

Including cover plate, and operating button

Concealed flush pipe 248ø 28 x ø 26 mm


Polystyrene jacket, temporary polystyrene cover

Water inlet fitting for pedestal WC 248/1 White


Water supply fitting for wall mounted WC 248/2 WhiteInlet pipe ø 45 mm, 180 mm long, WC - connector


Article Description

Inlet pipe ø 45 mm, 300 mm long, WC - connector,wall rosette



(PLEASE NOTE: The concealed flush pipe isalready included in the scope of delivery of theflusher 2001UP. If otherwise required, you mayalso order it separately).

8

Supply - Stops for FlushersThread Size Order-

No. Surface

Supply stop model 54, 3/4" and 1/2" DN 20 3/4" 520for external pipework

with wall union DN 15 1/2" 521

Supply stop model 59, 1" DN 25 1" 540for external pipework

Supply stop model 54, 3/4" and 1/2" DN 20 3/4" 620for concealed pipework

with threaded rosette DN 15 1/2" 621

Supply stop model 54 S, 3/4" DN 20 3/4" 622

Supply stop model 59, 1" DN 25 1" 640for concealed pipeworkwith threaded rosette

chrome-plated

chrome-plated

chrome-plated

chrome-plated

for concealed pipework and lateralconnection of flusher

chrome-plated

Article Description

chrome-plated

chrome-plated

9

Urinal Flushers - With Self-Cleaning Jet BoreThread Size Order-

No. Surface

Urinal Flusher Model: NILplus 2003 DN 15 1/2" 2003

With NILplus automatic flush system


Flush quantity: constant 3 ± 0.5 l

Wall rosette 48 mm wide x 55 mm high

Application: all standard urinal bowls

Urinal Flusher Model: NILplus 2003A DN 15 1/2" 2003A

as above, however with supply stop

Spare / Replacement parts: 2003/10KCap and outlet nut(velours-chrome parts are non-returnable)


velours-chrome

Article Description

DIN 3265 - Test registration no. DIN DVGW768

Flush pipe ø 18 mm and urinal connector(internal type)


10

Urinal Flushers - Urinal Inlet BowsThread Size Order-

No. Surface

Urinal Flusher Model: DK 78 DN 15 1/2" 450Push-button operated


Urinal Flusher Model: DK 78 DN 15 1/2" 455as above, however with supply stop

Urinal Flusher Model: D 69 DN 15 1/2" 430Flush pipe ø 18 mm and wall rosette


Urinal inlet bow, 1/2" long type DN 15 1/2" 7450incl. Sliding rosette

Outlet thread 1/2"

Copper pipe ø 14 mm, 200 mm long

Order-no. 455: incl. Internal urinalconnector

Application: standard urinal bowls andsiphonic urinal bowls

chrome-plated

chrome-plated



chrome-plated

Article Description

Automatic flushing-time and -volume ,flush pipe ø 18 mm and wallrosette

chrome-plated

Application: standard urinal bowls (smallflush volume) and siphonic urinal bowls(large flush volume)

11

Accessories for Urinal FlushersThread Size Order-

No. Surface

Flush Pipes for Urinal FlusherModel: NILplus 2003Made of copper Pipe ø 18 x ø 16.5 x 190 mm, straight 2003/8Pipe ø 18 x ø 16.5 x 300 mm, straight 2003/46Pipe 25 mm cranked 2003/61Pipe 30 mm cranked 2003/62Pipe 40 mm cranked 2003/63Pipe 50 mm cranked 2003/64

Flush Pipes for Urinal FlusherModel: DK 78Made of copper Pipe ø 18 x ø 16.5 x 190 mm, straight 450/14Pipe ø 18 x ø 16.5 x 300 mm, straight 450/46Pipe 25 mm cranked 450/61Pipe 30 mm cranked 450/62Pipe 40 mm cranked 450/63Pipe 50 mm cranked 450/64

Flush Pipes for Urinal FlusherModel: D 69Made of copper Pipe ø 18 x ø 16.5 x 190 mm, straight 430/15Pipe ø 18 x ø 16.5 x 300 mm, straight 430/46Pipe 25 mm cranked 430/61Pipe 30 mm cranked 430/62Pipe 40 mm cranked 430/63Pipe 50 mm cranked 430/64

Internal urinal connector 450/35for flush pipe ø 18 mm, incl. RosetteUrinal inlet: vertical, from top

External urinal connector 450/36

Urinal inlet: vertical, from top

Urinal bell-shaped cover 450/37for flush pipe ø 18 mmUrinal inlet: vertical, from top

chrome-plated

for flush pipe ø 18 mm, incl. Bell-shapedcover

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

Article Description

chrome-plated

chrome-plated

chrome-plated

12

Urinal Flusher for Concealed InstallationThread Size Order-

No. Surface

Urinal Flusher for concealed installationModel: 2003UP

DIN 3265 - Test registration no. DIN DVGW 768


Flush volume: constant 3 ± 1.0 l

Applications:

Duravit: Ben, Bill

Keramag: Monodet, Aller

Ideal Standard: Tonga, Penta, Pindar, Parama

DN 15 1/2" 2003UP

Installation and operating instructions.

2510

445 raw

Connecting pipe 1/2" with urinal connector 445/44K raw

Article Description

With NILplus automatic flush system and individualflush control

All standard siphonic and normal urinal bowls withmiddle inlet at back, e.g.

V&B: Colani, Omnia (Ebra), Omnia (Esta), Helios,Magnum, Stratos, Tiora, Viala

Concealed casing 162 x 162 x 73 mm includingscrews and plugs for fitting in wall recess or pre-fabricated wall sections.

Temporary protective cover and polystyrene coverincluding fixing screws.

Scope of delivery of parts required for 2nd stage ofinstallation:

Scope of delivery of parts required for 1st stage ofinstallation:

Urinal flusher including screw connections withintegrated supply stop on inlet and outlet sides.

Inlet side at top 1/2" internal thread, outside at bottom1/2" external thread.

Cover plate including operting button. Fitting framewith fixing screws. Installation and operatinginstructions.

Urinal inlet fitting for urinal flusher model: NILplus2003UPSliding connection, pipe, cap-nut, wall union,connection pipe 1/2" and urinal connector. The beused instaed of outlet screw fitting 1/2". Heightadjustment: ± 15 mm. Suitable for urinal bowls withinlet at back.

Brushed stainless steel

Concealed part

Cover plate

13

Self - Closing Straight-Way ValvesThread Size Order-

No. Surface

1/2" internal thread on both sides DN 15 1/2" 7001/2" external thread on both sides DN 15 1/2" 7011/2" captive nut connection on both sides DN 15 1/2" 7023/4" internal thread on both sides DN 20 3/4" 7033/4" external thread on both sides DN 20 3/4" 7043/4" captive nut connection on both sides DN 20 3/4" 705

DN 15 1/2" 710

DN 15 1/2" 720Self-closing straight way valve with pre-installed shower mixer tap

Backflow-preventer, covered "S"-connectors1/2", 3/4" external thread on bottom ofstraight way valve, completely pre-fixed

chrome-plated

chrome-plated

Concealed casing 120 x 96 x 66 mm deep,cover plate 150 x 125 mm, fixing screws,1/2" captive nut connections.

chrome-plated

Self-closing straight way valve withadjustable operating time, for concealedinstallation

Article Description

Self-closing straigh-way valves withadjustable operating time

chrome-plated

chrome-plated

14

Self - Closing Straight-Way ValvesThread Size Order-

No. Surface

DN 15 1/2" 730

DN 15 1/2" 740

DN 15 1/2" 750

chrome-plated

Self-closing straight way valve with pre-installed thermostatic mixer tap, forconcealed installation

Backflow preventer, dirt filters, 38°C antiscalding feature, concealed casing 225 x225 x 84 mm deep, cover plate 225 x 225mm, fixing screws, 1/2" captive nutconnections on the supply pipe and at thebottom, completely pre-fixed

chrome-plated

Self-closing straight way valve with pre-installed thermostatic mixer tap

Backflow preventor, dirt filters, 38°C antiscalding feature, covered + lockable "S"connectors 1/2" on the supply pipe, 3/4"external thread on the bottom, completelypre-fixed

Self-closing straight way valve with pre-installed shower tap mix-system, forconcealed installation

Backflow preventor, concealed casing 225 x225 x 84 mm deep, cover plate 225 x 225mm, fixing screws, "S"-connectors and 1/2"captive nut connections on the supply pipe,1/2" captive nut connection on bottom,completely pre-fixed

chrome-plated

Article Description

15

NILplus Shower - SetsThread Size Order-No. Surface

NILplus shower set 700.825.08 DN 15 1/2" 700.825.08Self-closing straight way valve

NILplus shower set 710.020.08 DN 15 1/2" 710.020.08




+ wall feed-through


Article Description

+ rising pipe incl. Screw fitting and wallunion+ shower head 20° and economy showerhead type: NOVAMATIC 8 l/min.

chrome-plated

chrome-platedSelf-closing straight way valve, for

concealed installation+ shower head 20° NOVAMATIC (showerarm 20°, rosette ø 70 mm, economy showerhead NOVAMATIC 8 l/min.)

chrome-platedSelf-closing straight way valve, combined

with shower mixer tap.+ riser pipe incl. Screw fittings and wallunion

+ shower arm 20° and economy showerhead type: NOVAMATIC 8 l/min.


with shower mixer tap, for concealedinstallation.+ riser pipe incl. Screw fittings and wallunion+ shower arm 20° and economy showerhead type: NOVAMATIC 8 l/min.


with thermostatic shower mixer tap.

+ shower head 20°, rosette ø 70 mm,economy shower head type: NOVAMATIC 8l/min.

+ shower head 20°, rosette ø 70 mm,economy shower head type: NOVAMATIC 8l/min.


with thermostatic shower mixer tap, forconcealed installation

16

Accessories for Self-Closing Straight-Way ValvesThread Size Order-

No. Surface

Shower set 20° NOVAMATIC 025.08

Shower head NOVAMATIC 8 l/min 795.081/2" internal thread

Riser pipe 800

Wall feed through 1/2" x 3/4" 781long type, with sliding rosette

Angle connection 1/2" x 1/2" 780

Shower arm 20° 783

Article Description

(Shower arm 20°, rosette ø 70 mm,economy shower head NOVAMATIC 8l/min.)

chrome-plated

with compression nut 1/2" for pipe ø 15 mm,rectangular rosette

chrome-plated

chrome-plated

chrome-plated

Riser pipe ø 18 mm x 1000 mm, cranked,2 cap nuts 3/4", wall union 1/2" x 3/4"

chrome-plated

1/2" external thread on both sides, wallrosette ø 70 mm

chrome-plated

17

Foot Spraying Equipment and Accessories


DN 15 1/2" 481

For wall mounted installationFlow pressure 1.2 - 5.0 barFlusher 1/2", rectangular rosetteFlush pipe approx. 800 mm longIncl. Spray nozzle

DN 15 1/2" 486

For semi-concealed installationFlow pressure 1.2 - 5.0 barFlusher 1/2", rectangular rosetteHeight adjustable wall feed-through bwithrectangular wall rosetteOutlet pipe with spray nozzle and wallrosette

chrome-plated

Article Description

Foot spraying equipment with supplystop

chrome-plated

Foot spraying equipment with supplystop

18

Design - Angle ValvesThread Size Order-

No. Surface

Angle valve NILplus topform DN 15 1/2" 2005 PolishedDIN EN ISO 3822 chromeTest registration no. PA-IX 276/IAGroup of fittings IGerman patent no. 3223356Self-sealing connection thread 1/2"Sliding rosetteELB screw fitting 3/8" for copper pipeø 10 mm, with design cover cap

Angle valve NILplus crossline DN 15 1/2" 20051 PolishedAll metall angle valve with patented chromeNILplus upper part. German patentno. 3223356. Angle valve acc. to DIN 3227.Noise level acc. to DIN EN ISO 3822.Sels-sealing connection thread 1/2".Sliding rosette ø 55 mm, ELB-screwfitting 3/8" for copper pipe ø 10 mm withplug on design cover cap

Angle valve NILplus topline DN 15 1/2" 20052 PolishedAll metall angle valve with patented chromeNILplus upper part. German patentno. 3223356. Angle valve acc. to DIN 3227.Noise level acc. to DIN EN ISO 3822.Sels-sealing connection thread 1/2".Sliding rosette ø 55 mm, ELB-screwfitting 3/8" for copper pipe ø 10 mm withplug on design cover cap

Angle valve NILplus pinline DN 15 1/2" 20053 PolishedAll metall angle valve with patented chromeNILplus upper part. German patentno. 3223356. Angle valve acc. to DIN 3227.Noise level acc. to DIN EN ISO 3822.Sels-sealing connection thread 1/2".Sliding rosette ø 55 mm, ELB-screwfitting 3/8" for copper pipe ø 10 mm withplug on design cover cap

NILplus design cover cap 20051-11 Polishedchrome

For use in combination with flexiblehoses instead of copper pipes

Article Description

19


Angle valve 3/8", short type DN 10 3/8" 1222

Compression fitting 3/8"for copper pipe ø 10 mm

Angle valve 3/8", short type DN 10 3/8" 1222/ELB

ELB screw fitting 3/8"for copper pipe ø 10 mm

Angle valve 3/8", short type DN 10 3/8" 1225Self sealingCompression fitting 3/8"for copper pipe ø 10 mm

Angle valve 3/8", short type DN 10 3/8" 1225/ELBSelf sealingELB screw fitting 3/8"for copper pipe ø 10 mm



Angle valve 1/2", short type DN 15 1/2" 1322/ELB


Angle valve 1/2", short type DN 15 1/2" 1325Self sealing


Angle valve 1/2", short type DN 15 1/2" 1325/ELBSelf sealing


chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

Article Description

chrome-plated

chrome-plated

chrome-plated

Angle Valves Suitable as stop- and throttle valves.DIN 3227 - Test reg. No. P-IX 723 / IA

20


Angle valve 3/8", long type DN 10 3/8" 1242

Sliding rosette, compression fitting 3/8"for copper pipe ø 10 mm

Angle valve 3/8", long type DN 10 3/8" 1242/ELB

Sliding rosette, ELB screw fitting 3/8"for copper pipe ø 10 mm

Angle valve 3/8", long type DN 10 3/8" 1245Self sealingSliding rosette, compression fitting 3/8"for copper pipe ø 10 mm

Angle valve 3/8", long type DN 10 3/8" 1245/ELBSelf sealingSliding rosette, ELB screw fitting 3/8"for copper pipe ø 10 mm



Angle valve 1/2", long type DN 15 1/2" 1342/ELB


Angle valve 1/2", long type DN 15 1/2" 1345Self sealing


Angle valve 1/2", long type DN 15 1/2" 1345/ELBSelf sealing


chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

Article Description

chrome-plated

chrome-plated

chrome-plated

Suitable as stop- and throttle valves.DIN 3227 - Test reg. No. P-IX 723 / IAAngle Valves

21


Angle valve 1/2", long type DN 15 1/2" 1342/Ewith drainage aperture




Angle valve 1/2", short type DN 15 1/2" 1365Self sealing




Angle valve 1/2", long type DN 15 1/2" 1385Self sealing


Angle valve 1/2", short type DN 15 1/2" 1504With sanitary head and tricorn handle


Angle valve 1/2", long type DN 15 1/2" 1544With sanitary head and tricorn handle


chrome-plated

chrome-plated

chrome-plated

chrome-plated

Article Description

chrome-plated

chrome-plated

chrome-plated

Suitable as stop- and throttle valves.DIN 3227 - Test reg. No. P-IX 723 / IAAngle Valves

22


Slanted - seat valve 3/8" DN 10 3/8" 3122Short type


Slanted - seat valve 1/2" DN 10 3/8" 3142Long type




Slanted - seat valve 1/2" DN 15 1/2" 4142Long type







chrome-plated

chrome-plated

chrome-plated

Clamp ring screwing 1/2" for copper pipe ø15 mm (compression nut 1/2" x ø 15 mm,brass clamp ring ø 15 mm)

Article Description

chrome-plated

chrome-plated

chrome-plated

Test reg. No. P-IX 116 / ISlanted - Seat Valves

23


Hose tap 3/8" x 3/4" DN 10 3/8" 6600

3/4" hose connection thread

3/8" connection thread

Hose tap as above DN 10 3/8" 6601however with pipe ventilation fitting

Combined angle valve 3/8" x 3/4" DN 10 3/8" 6610Sliding rosette ø 60 mm3/4" hose connection thread


Dto., however with pipe ventilation fitting DN 10 3/8" 6611

Combined angle valve 1/2" x 3/4" DN 15 1/2" 6620


Combined angle valve 1/2" x 3/4" DN 15 1/2" 6625with self - sealing connection threadDto., however with pipe ventilation fitting DN 15 1/2" 6626

Slanted - seat hose tap 1/2" x 3/4" DN 15 1/2" 66303/8" sanitary head with backflow prevention device

No. 6630 and tricorn sani-grip

3/8" connection thread, 3/4" hose

connection thread

as above, however with lockable grip cap DN 15 1/2" 6634 cr-plated

Slanted - seat hose tap 1/2" x 3/4" DN 15 1/2" 6631

No. 66343/8" connection thread3/4" hose connection thread

as above, however with lockable grip cap DN 15 1/2" 6635 cr-platedNo. 6631

chrome-plated

Pipe ventilation fitting according to DIN 3266 - Test registration no. applied for

chrome-plated

chrome-plated

3/8" sanitary head with backflow preventiondevice and tricorn sani-grip

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated


3/8" ELB screw fitting for copper pipeø 10 mmNoise level according to DIN 4109 /DIN 52218 - PA-IX 718 / IA

3/8" ELB screw fitting for copper pipeø 10 mmNoise level according to DIN 4109 /DIN 52218 - PA-IX 8349 / I

chrome-plated

chrome-plated

Hose taps With back flow preventer and pipe ventilator acc. to DIN 3266 as safety combination "HD" acc. to DIN 1988, part 4 and DIN EN 1717 (back flow preventer and pipe ventilator)

Article Description

Hose tap for connection to existing anglevalves


24


Hose tap 1/2" x 3/4" DN 15 1/2" 6640Hose tap as intermediate valve for single draw-off points• 3/8" sanitary head with back flow preventor device and tricorn sani-grip• 3/4" hose connection thread

Hose tap 1/2" x 3/4" DN 15 1/2" 6641Hose tap as intermediate valve for single draw-off points

Safety combination "HD" with back flowpreventer and pipe ventilator

• 3/8" sanitary head with back flow preventor and tricorn sani-grip• 3/4" hose connection thread

Hose tap 3/4" DN 20 3/4" 6642Hose tap as intermediate valve for wall - mounted mixer taps

• 3/8" sanitary head with back flow preventor and tricorn sani-grip• 3/4" hose connection thread• 3/4" spacer

Hose tap 3/4" DN 20 3/4" 6643Hose tap as intermediate valve for wall - mounted mixer taps


• 3/8" sanitary head with back flow preventor and tricorn sani-grip• 3/4" hose connection thread• 3/4" spacer

Hose taps With back flow preventer and pipe ventilator acc. to DIN 3266 as safety combination "HD" acc. to DIN 1988, part 4 and DIN EN 1717 (back flow preventer and pipe ventilator)

chrome-plated

chrome-plated

chrome-plated

Article Description

chrome-plated

25


NILplus hose tap 3/8" x 3/4" DN 10 3/8" 6800

3/4" hose connection thread


NILplus hose tap as above DN 10 3/8" 6801however with pipe ventilation fitting

NILplus c ombined angle valve 3/8" x 3/4" DN 10 3/8" 6810Sliding rosette ø 60 mm3/4" hose connection thread



NILplus combined angle valve 1/2" x 3/4" DN 15 1/2" 6820


NILplus combined angle valve 1/2" x 3/4" DN 15 1/2" 6825with self - sealing connection threadDto., however with pipe ventilation fitting DN 15 1/2" 6826

NILplus slanted - seat hose tap 1/2" x 3/4" DN 15 1/2" 68303/8" sanitary head with backflow prevention device

and NILplus handle

3/8" connection thread, 3/4" hose

connection thread

NILplus slanted - seat hose tap 1/2" x 3/4" DN 15 1/2" 6631

3/8" connection thread3/4" hose connection thread

Article Description

Hose tap for connection to existing anglevalves

3/8" sanitary head with backflow preventiondevice and NILplus handle

NILplus hose taps With back flow preventer and pipe ventilator acc. to DIN 3266 as safety combination "HD" acc. to DIN 1988, part 4 and DIN EN 1717 (back flow preventer and pipe ventilator)

3/8" ELB screw fitting for copper pipeø 10 mmNoise level according to DIN 4109 /DIN 52218 - PA-IX 8349 / I

chrome-plated

chrome-plated

chrome-plated


3/8" ELB screw fitting for copper pipeø 10 mmNoise level according to DIN 4109 /DIN 52218 - PA-IX 718 / IA

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

Pipe ventilation fitting according to DIN 3266 - Test registration no. applied for

chrome-plated

chrome-plated


26


NILplus hose tap 1/2" x 3/4" DN 15 1/2" 6840Hose tap as intermediate valve for single draw-off points• 3/8" sanitary head with back flow preventor device and NILplus handle• 3/4" hose connection thread

NILplus hose tap 1/2" x 3/4" DN 15 1/2" 6841Hose tap as intermediate valve for single draw-off pointsSafety combination "HD" with back flowpreventer and pipe ventilator• 3/8" sanitary head with back flow preventor and NILplus handle• 3/4" hose connection thread

NILplus hose tap 3/4" DN 20 3/4" 6842Hose tap as intermediate valve for wall - mounted mixer taps• 3/8" sanitary head with back flow preventor and NILplus handle• 3/4" hose connection thread• 3/4" spacer

NILplus hose tap 3/4" DN 20 3/4" 6843Hose tap as intermediate valve for wall - mounted mixer tapsSafety combination "HD" with back flowpreventer and pipe ventilator• 3/8" sanitary head with back flow preventor and NILplus handle• 3/4" hose connection thread• 3/4" spacer

NILplus sink tap 1/2" x 3/4" DN 15 1/2" 6850• Adjustable distance 50 mm• 1/2" sanitary head with back flow preventor and NILplus handle• 3/4" hose connection thread• 1/2" compression fitting for copper pipe ø 10 mm

chrome-plated

NILplus hose taps With back flow preventer and pipe ventilator acc. to DIN 3266 as safety combination "HD" acc. to DIN 1988, part 4 and DIN EN 1717 (back flow preventer and pipe ventilator)

Article Description

chrome-plated

chrome-plated

chrome-plated

chrome-plated

27


Sink tap 1/2" x 3/4" DN 15 1/2" 6650 chrome-plated

• Adjustable distance 50 mm• 1/2" sanitary head with back flow preventor and tricorn sani - grip• 3/4" hose connection thread• 1/2" compression fitting for copper pipe ø 10 mm

Sink bushing 6720 chrome-plated

• With hose connection• With copper pipe ø 12 mm x 500 mm• With 3/4" cap nut, with seal• Adjustable distance 70 mm

Draw - off tap DN 15 1/2" 6700with toggle - type handlehose connection 3/4" DN 20 3/4" 6710

Draw - off tap DN 15 1/2" 6701 chrome-with toggle - type handle platedhose connection 3/4" DN 20 3/4" 6711 chrome-

plated

Draw - off tap DN 15 1/2" 6702Safety combination "HD" with back flowpreventer and pipe ventilator DN 20 3/4" 6712with toggle - type handlehose connection 3/4"

Draw - off tap DN 15 1/2" 6703 chrome-Safety combination "HD" with back flow platedpreventer and pipe ventilator DN 20 3/4" 6713 chrome-with toggle - type handle platedhose connection 3/4"

Draw - off tap DN 15 1/2" 6704 chrome-plated


with sanitary head and tricorn handlehose connection 3/4"

as above, however with lockable grip cap DN 15 1/2" 6705 chrome-plated

as above, however with lock shield device DN 15 1/2" 6706 chrome-plated

dull-chrome plated finish


Sink and draw-off taps With back flow preventer and pipe ventilator acc. to DIN 3266 as safety combination "HD" acc. to DIN 1988, part 4 and DIN EN 1717 (back flow preventer and pipe ventilator)

Article Description



28

Pipe ventilator, Anti hose-burst deviceThread Size Order-

No. Surface

Pipe ventilator 3/4", acc to DIN 3266 6900 chrome-plated

Anti Hose-Burst-Device 6901 chrome-3/4" internal x 3/4" external thread platedfor combined angle valves and draw-off taps, TÜV and GS approved

Article Description

29

Thread Size Order-No. Surface €

Scope of delivery gray colored !!!

DN 15 1/2" 7005

As no. 7005, however without pipe ventilator DN 15 1/2" 7000for wall thickness 150 mm - 275 mmFrostproof tap, with sanitary head and lock shield device DN 15 1/2" 7015

As no. 7015, however witout pipe ventilator DN 15 1/2" 7010for wall thickness 150 mm - 275 mmFrostproof tap, with sanitary head and lockable grip cap DN 15 1/2" 7025for wall thickness 150 mm - 275 mmAs no. 7025, however witout pipe ventilator DN 15 1/2" 7020for wall thickness 150 mm - 275 mm

Frostproof tap, with tricorn handle DN 15 1/2" 7055

As no. 7055, however without pipe ventilator DN 15 1/2" 7050

Frostproof tap, with sanitary head and lock shield device DN 15 1/2" 7065

As no. 7065, however witout pipe ventilator DN 15 1/2" 7060

Frostproof tap, with sanitary head and lockable grip cap DN 15 1/2" 7075

As no. 7075, however witout pipe ventilator DN 15 1/2" 7070

Article Description

Frostproof tap for wall thickness 150 mm - 275 mm. With tricorn handle • 1/2" sanitary head with grease chamber • Backflow preventer acc. DIN 1988 • Pipe ventilator acc. DIN 3266 • 3/4" hose connection • Wall rosette ø 85 mm with length adaption • Wall feed-through ø 26 mm and valve spindle with patented cut-off system • Close and stop plug for wall pipe and valve spindle when in carcass phase • Felt insulation • Water connection with 1/2" external thread • Angled connection 1/2" (order-no. 5224) and extension set (order-no. 7777) to be ordered separately

chrome-plated

chrome-plated

chrome-plated

Wall thickness 150 mm - 275 mm

Hydraulic values acc. DIN 3269, sound level values acc. DIN ISO 3822/I, test reg. PA-IX 9096/II

chrome-plated

for wall thickness 150 mm - 275 mmchrome-plated

chrome-plated

chrome-plated

Wall thickness 250 mm - 475 mm

chrome-platedfor wall thickness 250 mm - 475 mm

Frost-proof taps With back flow preventer and pipe ventilator acc. to DIN 3266 as safety combination "HD" acc. to DIN 1988, part 4 and DIN EN 1717 (back flow preventer and pipe ventilator) German patent no. 10315224



for wall thickness 250 mm - 475 mmchrome-platedfor wall thickness 250 mm - 475 mm


30


7777 raw brass

Extension set for frostproof tap

• Wall pipe extension ø 35 x 115 mm, with screws M 6 and o-ring seals

Frost-proof taps - Accessories German Patent no. 10315224

Article Description

• Valve spindle extension with plug-on sleeve and screws M 4

31

Concealed valves with internal thread on both sides.Package containing concealed + exposed part.

Extended mounting dimension by using extra long valve spindles !


Concealed valve 1/2" DN 15 1/2" 8700made of dezincification resistant brass1/2" x 1/2" internal thread. Installationdepth max. 50 mm. Sanitary greasechamber head with extra long valvespindle. With balance sleeve, concealed protection cap, sliding rosette ø 70 mm.Tricorn grip with blue and red socket.

as above, however with acryllic grip (blue) DN 15 1/2" 8701Concealed valve (internal thread) as above, however with acryllic grip (red) DN 15 1/2" 8702

with tricorn grip

as above, however with lock shield device DN 15 1/2" 8705as above, however with closed cap DN 15 1/2" 8706

Concealed valve 3/4" DN 20 3/4" 8710made of dezincification resistant brass3/4" x 3/4" internal thread. Installationdepth max. 55 mm. Sanitary greasechamber head with extra long valvespindle. With balance sleeve, concealed protection cap, sliding rosette ø 70 mm.Tricorn grip with blue and red socket.

Concealed valve as above, however with acryllic grip (blue) DN 20 3/4" 8711with acryllic grip as above, however with acryllic grip (red) DN 20 3/4" 8712


Concealed valve 1" DN 25 1" 8720made of dezincification resistant brass1" x 1" internal thread. Installationdepth max. 60 mm. Sanitary grease

Concealed valve chamber head with extra long valvewith lock shield device spindle. With balance sleeve, concealed

protection cap, sliding rosette ø 70 mm.Tricorn grip with blue and red socket.

as above, however with acryllic grip (blue) DN 25 1" 8721as above, however with acryllic grip (red) DN 25 1" 8722

as above, however with lock shield device DN 25 1" 8725as above, however with closed cap DN 25 1" 8726

Concealed valvewith closed cap

Material acc. to DIN EN 50930. Dimensions acc. DIN 3512. Hydraulic values acc.DIN EN 1213. Noise behaviour acc. DIN EN 3822. DVGW model test certificateNW-6150BS0117.

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

Article Description

chrome-plated

chrome-plated

chrome-plated

32

Concealed valves with soldering connection on both sides.Package containing concealed + exposed part.



Concealed valve DN 15 DN 15 ø 15 8730made of dezincification resistant brassSoldering connection ø 15 mm on both sides.Installation dim. max. 50 mm. Sanitary greasechamber head with extra long valvespindle. With balance sleeve, concealed protection cap, sliding rosette ø 70 mm.Tricorn grip with blue and red socket.

as above,however with acryllic grip (blue) DN 15 ø 15 8731Concealed valve as above, however with acryllic grip (red) DN 15 ø 15 8732

(soldering connection)

with tricorn grip as above, however with lock shield device DN 15 ø 15 8735as above, however with closed cap DN 15 ø 15 8736Concealed valve DN 15 DN 15 ø 18 8740made of dezincification resistant brassSoldering connection ø 18 mm on both sides.Installation dim. max. 50 mm. Sanitary greasechamber head with extra long valvespindle. With balance sleeve, concealed protection cap, sliding rosette ø 70 mm.Tricorn grip with blue and red socket.

as above, however with acryllic grip (blue) DN 15 ø 18 8741Concealed valve as above, however with acryllic grip (red) DN 15 ø 18 8742with acryllic grip

as above, however with lock shield device DN 15 ø 18 8745as above, however with closed cap DN 15 ø 18 8746Concealed valve DN 20 DN 20 ø 22 8750made of dezincification resistant brassSoldering connection ø 22 mm on both sides.Installation dim. max. 55 mm. Sanitary greasechamber head with extra long valvespindle. With balance sleeve, concealed protection cap, sliding rosette ø 70 mm.Tricorn grip with blue and red socket.

as above, however with acryllic grip (blue) DN 20 ø 22 8751as above, however with acryllic grip (red) DN 20 ø 22 8752

Concealed valve as above, however with lock shield device DN 20 ø 22 8755with lock shield device as above, however with closed cap DN 20 ø 22 8756

Concealed valve 25 DN 25 ø 28 8760made of dezincification resistant brassSoldering connection ø 28 mm on both sides.Installation dim. max. 60 mm. Sanitary greasechamber head with extra long valvespindle. With balance sleeve, concealed protection cap, sliding rosette ø 70 mm.Tricorn grip with blue and red socket.

as above, however with acryllic grip (blue) DN 25 ø 28 8761as above, however with acryllic grip (red) DN 25 ø 28 8762

Concealed valvewith closed cap as above, however with lock shield device DN 25 ø 28 8765

as above, however with closed cap DN 25 ø 28 8766


Article Description

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

33

Concealed valvesConcealed parts - exposed parts - extension sets.



Concealed set 1/2" DN 15 1/2" 8700-01 raw brassConcealed valve with 1/2" internal thread on both

sides. Sanitary grease chamber head 1/2" with

extra long valve spindle, concealed protection cap.

Concealed set 3/4" DN 20 3/4" 8710-01 raw brassConcealed part with internal thread Concealed valve with 3/4" internal thread on both

(concealed valve, protection cap) sides. Sanitary grease chamber head 3/4" with

extra long valve spindle, concealed protection cap.

Concealed set 1" DN 25 1" 8720-01 raw brassConcealed valve with 1" internal thread on both

sides. Sanitary grease chamber head 1" with extra long valve spindle, concealed protection cap.

Concealed set DN 15 ø 15 DN 15 ø 15 8730-01 raw brassConcealed part with soldering connection Concealed valve with soldering connection ø 15 on

(concealed valve, protection cap) both sides. Sanitary grease chamber head 1/2"

with extra long valve spindle, conc. protection cap.

Concealed set DN 15 ø 18 DN 15 ø 18 8740-01 raw brassConcealed valve with soldering connection ø 18 on

both sides. Sanitary grease chamber head 1/2"

with extra long valve spindle, conc. protection cap.Exposed part

(tricorn grip, sliding rosette, balance sleeve) Concealed set DN 20 ø 22 DN 20 ø 22 8750-01 raw brassConcealed valve with soldering connection ø 22 on

both sides. Sanitary grease chamber head 3/4"

with extra long valve spindle, conc. protection cap.

Concealed set DN 25 ø 28 DN 25 ø 28 8760-01 raw brassConcealed valve with soldering connection ø 28 on

Exposed part both sides. Sanitary grease chamber head 1"(acryllic grip, sliding rosette, balance sleeve) with extra long valve spindle, conc. protection cap.

Exposed part - tricorn grip 8700-02Tricorn grip, with blue + red socket.Balance sleeve, sliding rosette ø 70 mm.

Exposed part - acryllic gripExposed part Acryllic grip with adaptor piece. blue 8701-02

(lock shield device, sliding rosette, Balance sleeve, sliding rosette ø 70 mm. red 8701-03balance sleeve)

Exposed part - lock shield device 8705-02Lock shield device with adaptor sleeve.Balance sleeve, sliding rosette ø 70 mm.

Exposed part - closed cap 8706-02Exposed part Closed cap.

(closed cap, sliding rosette, balance sleeve) Balance sleeve, sliding rosette ø 70 mm.

Extension set for concealed valves 8795Extension +42 mm, with balance sleeveand spindle extension.

Extension set


Article Description

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

34

NILplus concealed valves Variable installation depth 35 - 105 mm by means of a 4x adjustable wall pipe

Package containing concealed + exposed part.


NILplus concealed valve 1/2" DN 15 1/2" 8800Concealed part with variable installationdepth 35-105 mm. Casing 1/2" x 1/2" internalthread. Dezincification resistant brass,sanitarygrease chamber head with short spindle. Wallpipe and intermediate spindle piece 4x adjust-

able. With polystyrene protection sleeve.Exposed part with NILplus handle, upper partwith integ. spindle and rosette ø 70 x 24 mmas above, however with acryllic grip (blue) DN 15 1/2" 8801as above, however with acryllic grip (red) DN 15 1/2" 8802


NILplus concealed valve 3/4" DN 20 3/4" 8810Concealed part with variable installationdepth 40 - 110 mm. Casing 3/4" x 3/4" internalthread. Dezincification resistant brass,sanitarygrease chamber head with short spindle. Wallpipe and intermediate spindle piece 4x adjust-

able. With polystyrene protection sleeve.Exposed part with NILplus handle, upper partwith integ. spindle and rosette ø 70 x 24 mmas above, however with acryllic grip (blue) DN 20 3/4" 8811as above, however with acryllic grip (red) DN 20 3/4" 8812


NILplus concealed valve 1" DN 25 1" 8820Concealed part with variable installationdepth 45-115 mm. Casing 1" x 1" internalthread. Dezincification resistant brass,sanitarygrease chamber head with short spindle. Wallpipe and intermediate spindle piece 4x adjust-

able. With polystyrene protection sleeve.Exposed part with NILplus handle, upper partwith integ. spindle and rosette ø 70 x 24 mmas above, however with acryllic grip (blue) DN 25 1" 8821as above, however with acryllic grip (red) DN 25 1" 8822

as above, however with lock shield device DN 25 1" 8825as above, however with closed cap DN 25 1" 8826

Article Description

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

35

NILplus concealed valves With sanitary ceramic head part

Variable installation depth 35 - 105 mm by means of a 4x adjustable wall pipePackage containing concealed + exposed part.


NILplus concealed valve 1/2" DN 15 1/2" 8900Concealed part with variable installationdepth 35-105 mm. Casing 1/2" x 1/2" internalthread. Dezincification resistant brass,sanitaryceramic head part with short spindle. Wallpipe and intermediate spindle piece 4x adjust-

able. With polystyrene protection sleeve.Exposed part with NILplus handle, upper partwith integ. spindle and rosette ø 70 x 24 mm

NILplus concealed valve 3/4" DN 20 3/4" 8910Concealed part with variable installationdepth 40-110 mm. Casing 3/4" x 3/4" internalthread. Dezincification resistant brass,sanitaryceramic head part with short spindle. Wallpipe and intermediate spindle piece 4x adjust-

able. With polystyrene protection sleeve.Exposed part with NILplus handle, upper partwith integ. spindle and rosette ø 70 x 24 mm

chrome-plated

Article Description

chrome-plated

36

Thread sizeOrder-

no. Surface

Threaded nipple 3/8"ext. x 3/8"ext. 5100 raw5101 chrome-pl.





Reducing fitting 3/8"int. x 3/8"ext. 5110 raw5111 chrome-pl.





Screw socket 3/4"int. x 3/4"int. 5120 raw5121 chrome-pl.

Screw connection 1/2" 5130 raw5131 chrome-pl.

Screw connection 1/2" 5132 raw5133 chrome-pl.

Threaded nipples, Reducing fittings, Screw sockets, Screw connections

Article description

37

Pipe CouplingsThread Size Order-

No. Surface

Pipe coupling 3/8" x 3/8" 5508Compression fitting 3/8" for copper pipe ø 8 mmdto, with compression fitting for copper 5500pipe ø 10 mm

Pipe coupling 3/8" x 1/2" 5501Compression fitting 1/2" for copperpipe ø 12 mm

Pipe coupling 1/2" x 1/2"Compression fitting 1/2" for copper 5603pipe ø 10 mm

dto, with compression fitting 1/2" for 5600copper pipe ø 12 mm



Pipe coupling 1/2" x 3/8" 5661Compression fitting 3/8" for copper pipe ø 10 mm

Pipe coupling 3/8" internalthread x 3/8" external thread 5710Compression fitting 3/8" for copper pipe ø 8 mm


Pipe coupling 1/2" internalthread x 1/2" external thread

Compression fitting 1/2" for copper 5803pipe ø 10 mm




Pipe coupling 1/2" internal 5860thread x 3/8" external thread

Compression fitting 3/8" for copper pipe ø 10 mm

Article Description

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

38

Pipe CouplingsThread Size Order-

No. Surface

Pipe coupling 3/8" x 3/8"

2 compression fittings 3/8" for copper 5558 chrome-pipe ø 8 mm plated


2 compression fittings 3/8" for copper 5556 chrome-pipe ø 10 mm and ø 8 mm plated


Pipe coupling 1/2" x 1/2"







Pipe coupling 1/2" x 3/8" 5660 chrome-plated

Compression fitting 1/2" for copper pipe ø 12 mm, with compression fitting 3/8"for copper pipe ø 10 mm

Article Description

39

Angled CouplingsThread Size Order-

No. Surface

Angled coupling 3/8" x 3/8"Compression fitting 3/8" for copper 5008fitting ø 8 mm


Angled coupling 3/8" x 1/2" 5251

Compression fitting 1/2" for copper fittingø 12 mmAngled coupling 1/2" x 1/2"Compression fitting 1/2" for copper fitting ø 10 mm 5212

Compression fitting 1/2" for copper 5200fitting ø 12 mm




Compression fitting 3/8" for copper fitting ø 10 mm

Angled coupling 3/8" internal thread



Angled coupling 1/2" internal thread





chrome-plated

chrome-plated

Article Description

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

40

Angled CouplingsThread Size Order-

No. Surface

Angled coupling 1/2" internal thread 5450

Compression fitting 3/8" for copper fitting ø 10 mm

Angled coupling 3/8" x 3/8"

2 compression fittings 3/8" for copper 5001pipe ø 8 mm


2 compression fittings 3/8" for copper 5003pipe ø 10 mm and ø 8 mm

Angled coupling 1/2" x 1/2"








Compression fitting 1/2" for copper pipe ø 12 mm, with compression fitting 3/8"for copper pipe ø 10 mm

chrome-plated

chrome-plated

chrome-plated

Article Description

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

41

Angled Couplings, T - CouplingsThread Size Order-

No. Surface

Angled coupling 1/2" x 1/2", long type 5065Threaded rosette, compression fitting 1/2" for copper pipe ø 12 mm

Angled coupling 1/2" x 3/8", long type 5070Threaded rosette, compression fitting 3/8" for copper pipe ø 10 mm

Angled coupling 1/2" x 1/2", long type 5270sliding rosette, compression fitting 1/2" for copper pipe ø 12 mm

Angled coupling 1/2" x 3/8", long type 5280sliding rosette, compression fitting3/8" for copper pipe ø 10 mm

T - coupling 3/8" x 3/8" x 3/8" 59003 compression fittings 3/8" for copper pipe ø 8 mmdto, however for copper pipe ø 10 mm 5901

dto., however for copper ø 10 mm, 5905ø 8 mm and ø 10 mm

T - coupling 1/2"x 1/2" x 1/2" 59023 compression fittings 1/2" for copper pipe ø 12 mmdto, however for copper pipe ø 14 mm 5903dto, however for copper pipe 16 mm 5904dto, however for copper pipe ø 12 mm, 5906ø 10 mm and ø 12 mmdto, however for copper pipe ø 14 mm, 5907ø 12 mm and ø 14 mmdto, however for copper pipe ø 16 mm, 5908ø 12 mm and ø 16 mm

T - coupling 3/8" x 3/8" x 3/8"

with flexible cap nut 3/8", with 59412 compression fittings 3/8" x ø 10 mmwith flexible cap nut 3/8", with 59422 ELB-fittings 3/8" x ø 10 mmwith flexible cap nut 3/8", without 5943compression fittings

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

Article Description

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

42

T - Couplings, Forked Couplings, Wall UnionsThread Size Order-

No. Surface

T - Piece 1/2" x 1/2" x 1/2" 5911

Spacer 1/2" x 1/2" 6000

T - Piece - Set 59311/2" x 1/2" x 1/2"

T-Piece 1/2" x 3/4" x 3/4" 5913with 3/4" screwing

Spacer 3/4" x 3/4" 6001with 3/4" screwing

T - Piece - Set 59321/2" x 3/4" x 3/4"T - piece with 3/4" screwing

Forked fitting 1/2" x 1/2" x 1/2" 6052short type

T - Piece 1/2" 6065with compression fitting 3/8", sliding rosette for copper pipe ø 10 mm

T - Piece 1/2" 6066with compression fitting 3/8", sliding rosette for copper pipe ø 12 mm

Wall union 1/2" 6060Compression fitting 1/2", sliding rosette, for copper pipe ø 10 mm

Wall union 1/2" 6061Compression fitting 1/2", sliding rosette, for copper pipe ø 12 mm

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

Article Description

chrome-plated

chrome-plated

chrome-plated

43

Accessories for Angle Valves and CouplingsThread Size Order-

No. Surface

Compression fitting 3/8" E/13Kfor copper pipe ø 8 mm



Compression nut 3/8" x ø 8 mm E/16



Tapered ring 3/8" x ø 8 mm E/19 raw



Shim 3/8" x ø 8 mm E/22 raw



Compression seal 3/8" x ø 8 mm E/25 raw



ELB screw fitting 3/8" E/29Kfor copper pipe ø 10 mm

ELB nut 3/8" x ø 10 mm E/32

ELB compression sleeve E/35K raw3/8" x ø 10 mm

Article Description

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

44


No. Surface

Screw fitting 3/8" with flat seal E/70Kfor copper pipe ø 8 mm with 3/8" flange



Cap nut 3/8" x ø 8 mm, flat type E/70



Seal 3/8" x ø 8 mm E/73 rawSeal 3/8" x ø 10 mm E/74 rawSeal 3/8" x ø 12 mm E/75 raw

Compression fitting 1/2"for copper pipe ø 8 mm E/59Kdto. for copper pipe ø 10 mm E/60K




Compression nut 1/2" x ø 8 mm E/59Compression nut 1/2" x ø 10 mm E/62Compression nut 1/2" x ø 12 mm E/63

Compression nut 1/2" x ø 14 mm E/103Compression nut 1/2" x ø 16 mm E/104


Tapered ring 1/2" x ø 10 mm E/105 rawTapered ring 1/2" x ø 12 mm E/106 rawTapered ring 1/2" x ø 14 mm E/107 rawTapered ring 1/2" x ø 16 mm E/108 raw

Shim 1/2" x ø 8 mm E/64 rawShim 1/2" x ø 10 mm E/65 rawShim 1/2" x ø 12 mm E/66 rawShim 1/2" x ø 14 mm E/67 rawShim 1/2" x ø 16 mm E/109 raw

Article Description

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

45


No. Surface
















Seal 1/2" x ø 10 mm E/82 raw




chrome-plated

chrome-plated

chrome-plated

Article Description

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

46


No. Surface

Threaded rosette 3/8" E/92

E/93 StainlessThreaded rosette 1/2" steel

Tap rosette 1/2" x ø 70 mm E/94 Stainlesssteel

Tap rosette 1/2" x ø 80 mm E/95 Stainlesssteel

Sliding rosette 3/8" E/41 Stainlesssteel

Sliding rosette 1/2" E/42 Stainlesssteel

Sliding rosette ø 70 mm E/44 Stainlesssteel

Sliding rosette 1/2" E/43 ABS chrome - plated

Article Description

chrome-plated brass

47

Copper Pipes ø 8 mm and ø 10 mm - Wall Thickness 0,70 mmThread Size Order-

No. Surface

Copper pipe ø 8 mm ø 8 x 300 8/3

straight at both ends ø 8 x 500 8/5

ø 8 x 700 8/7

ø 8 x 1000 8/10

ø 10 x 300 10/3Copper pipe ø 10 mm

ø 10 x 500 10/5straight at both ends

ø 10 x 700 10/7

ø 10 x 1000 10/10


3/8" flange (ø 14 mm) - straight ø 10 x 500 11/5

ø 10 x 700 11/7

ø 10 x 1000 11/10


ø 10 x 500 12/51/2" flange (ø 18 mm) - straight

ø 10 x 700 12/7

ø 10 x 1000 12/10


ø 10 x 500 30/53/8" flange - 1/2" flange

ø 10 x 700 30/7

ø 10 x 1000 30/10


ø 10 x 500 13/51/2" solder nipple (ø 18 mm) - straight

ø 10 x 700 13/7

ø 10 x 1000 13/10

chrome-plated

chrome-plated

chrome-plated

chrome-plated

Article Description

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

48

Copper Pipes ø 10 mm - Wall Thickness 0,70 mmThread Size Order-

No. Surface


3/8" flange with 3/8" nut - straight ø 10 x 500 14/5

ø 10 x 700 14/7

ø 10 x 1000 14/10


ø 10 x 500 15/51/2" flange with 1/2" nut - straight

ø 10 x 700 15/7

ø 10 x 1000 15/10


3/8" flange on both sides, with nut 3/8" ø 10 x 500 17/5

ø 10 x 700 17/7

ø 10 x 1000 17/10


ø 10 x 500 18/51/2" flange on both sides, with nut 1/2"

ø 10 x 700 18/7

ø 10 x 1000 18/10


ø 10 x 500 19/5flange 1/2", with nut 1/2" - flange 3/8", with nut 3/8" ø 10 x 700 19/7

ø 10 x 1000 19/10


ø 10 x 500 21/5flange 1/2", with nut 1/2" - 1/2" soldered throttle shim, with 1/2" nut ø 10 x 700 21/7

ø 10 x 1000 21/10

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

Article Description

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

49

Copper Pipes ø 12, ø 14 and ø 16 mm - Wall Thickness 0,70 mm



1/2" flange - straight ø 12 x 500 22/5

ø 12 x 700 22/7

ø 12 x 1000 22/10


ø 12 x 500 23/53/4" solder nipple - straight

ø 12 x 700 23/7

ø 12 x 1000 23/10


ø 12 x 500 28/5

ø 12 x 700 28/7

ø 12 x 1000 28/10


ø 14 x 500 24/51/2" flange - straight

ø 14 x 700 24/7

ø 14 x 1000 24/10


ø 16 x 500 31/51/2" flange - straight

ø 16 x 700 31/7

ø 16 x 1000 31/10


ø 16 x 500 32/51/2" flange, with 1/2" nut and seal - straight

ø 16 x 700 32/7

ø 16 x 1000 32/10

1/2" flange, with 1/2" nut and seal - straight

Article Description

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

50

Coils of Copper Pipes ø 8, ø 10, ø 12 mm - Wall thickness 0,70 mm - 0,80 mm


Coils of copper pipe ø 8 mm - 5 m long ø 8 25wall thickness 0,70 mm




chrome-plated

Article Description

chrome-plated

chrome-plated

chrome-plated

51

Length in mm

Order-No. Surface

Flexible connection hose 300 40/3Compression fitting 3/8" for copper 500 40/5pipe 10 mm - connection sleeve ø 10 mm 1000 40/10

Flexible connection hose 300 41/3Cap nut 3/8" - Connection sleeve ø 10 mm 500 41/5

1000 41/10


1000 42/10

Flexible connection hose 300 43/33/8" cap nut at both ends 500 43/5

1000 43/10

Flexible connection hose 300 44/33/8" cap nut - 1/2" cap nut 500 44/5

1000 44/10


1000 45/10

Flexible connection hose 300 46/3Cap nut 3/8" - Compression fitting 3/8" 500 46/5for copper pipe ø 10 mm 1000 46/10

Flexible connection hose300 47/3

Cap nut 1/2" - External thread 1/2" 500 47/51000 47/10


Cap nut 3/8" - Angled connection 3/8" 300 48/3500 48/5



Test acc. to DVGW W-543, DVGW W-270 and BGA KTW A and certified acc. to

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

Flexible connection hoses with hygienically tested silicone inliner and stainless steel braiding. Hoses acc. to DVGW W 543, group 1

Article Description

chrome-plated

chrome-plated

52

Length in mm

Order-No. Surface

Flexible connection hose 300 50/3Compression fitting 3/8" for copper 500 50/5pipe 10 mm - connection sleeve ø 10 mm 1000 50/10


1000 51/10


1000 52/10


1000 53/10

Flexible connection hose 300 54/33/8" cap nut - 1/2" cap nut 500 54/5

1000 54/10


1000 55/10

Flexible connection hose 300 56/3Cap nut 3/8" - Compression fitting 3/8" 500 56/5for copper pipe ø 10 mm 1000 56/10


Cap nut 1/2" - External thread 1/2" 500 57/51000 57/10





Test acc. to DVGW W-543, DVGW W-270 and BGA KTW A and certified acc. to

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

chrome-plated

Flexible connection hoses with hygienically tested silicone inliner and stainless steel braiding. Hoses acc. to DVGW W 543, group 1

Article Description

chrome-plated

chrome-plated

53

NIL NIL - SELECT-SAN.RUselect-san.ru/upload/Catalogue_2009.pdf · DIN 4109 - Test registration no....

Documents

Transcript of NIL NIL - SELECT-SAN.RUselect-san.ru/upload/Catalogue_2009.pdf · DIN 4109 - Test registration no....