Nikon Lens Nomenclature - A Study in Frustration

8/12/2019 Nikon Lens Nomenclature - A Study in Frustration

1/5

< Product Resources< Nikon Resources

Nikon Lens Nomenclature - a study in frustration

Confused? If you are new to the Nikon line of photographic equipment, you may find yourself

inundated with terminology and acronyms that leave you scratching your watch (or winding

your head) in bewilderment. Hopefully, the following can take some of the mystery out of the

process, it pertains to Nikons built after the rangefinder era. You need to know some definitionsfirst.

ADR stands for Aperture Direct Readout.

ADR is the small f-stop number that appears on a small ring at the very back of the later

lenses. If you look carefully at the body of later model manual focus Nikon cameras, you may

see a small window at the top of the lens mounting ring. Ambient, or surrounding light, is

reflected off the ADR ring through the small window into the view finder, a llowing you to see

what f-stop you have set without removing your eye from the focusing screen.

AI stands for Automatic Indexing

.

AI allows you to perform metering with the lens wide open at it's maximum aperture (so youcan see to focus with the screen at it's brightest) - then as the shutter is released, the lens

"stops down" (or the aperture becomes smaller to what you have set on the ADR) to properly

expose the picture.

Non - AI stands for the early bayonet-mount lens series that did not offer automatic

indexing

.

You will often see these lenses offered for sale and described variously as "NonAI", "NAI

(erroneously - NAI should stand for Nikon AI)", "Lenses with prong IC" or even "Nikon prong".

One clue that a lens is Non-AI is when you see a description such as "Nikkor-Q 135/2.8" - The

"Q" (or other letters) is the early designation that gives the number of elements in the lens.

Non - AI (The early bayonet-mount lenses)

Solid "ears" (see note) on your lens indicate an Non-AI lens.

These lenses can not be mounted on many of the later

bodies without causing damage because the "ears" strike

the body prism when you mount them

.See the charts to determine if they will physically mount on your

camera body. If the lens will mount on your camera body, then

check if it will allow normal metering or if you are required to

"stopdown" the lens to meter. If you are required to "stop down"

to properly meter, you first focus the lens at it's maximum

aperture with a bright screen, then "stop down" to meter for

proper exposure, then release the shutter. (Not very handy to do)

Small picture at right shows the coupling pin on the body. Note:

In some circles referred to as 'bat ears'.

If the black outer rim on the lens base is solid all around

the lens (no meter coupling ridge) you know it definitely is a Non-AI lens. Nomenclature on the

lens may help also. If the lens designation contains a letter or two letters, it denotes the

number of elements. See chart above.
http://www.bhphotovideo.com/find/Product_Resources/nikonComu.jsphttp://www.bhphotovideo.com/find/Product_Resources/nikonComu.jsphttp://www.bhphotovideo.com/find/Product_Resources/navigationComu.jsp


2/5

AI'd (Non - AI Lenses physically converted to AI after manufacture) and AI Lens

When Nikon developed AI, users of the old lenses and bodies were not

left out in the cold like many of the other manufacturers did to their customers. They offered

factory alterations to Non-AI lenses so their customer didn't have to start over collecting lenses

to mate with their "new" updated camera bodies. These alterations are no longer offered by the

factory, but other folks do them still. These "ears" have holes (see note) in them (as do later

AIS lenses) and are mounted further out on the lens to clear the prism and allow mounting. A

meter coupling ridge was added. Note : referred to in some circles as 'hog's nose'.

If the black outer rim on the lens base has a rim (meter

coupling ridge), the lens is either AI or AIS. Note the

presence of the "ears" in this picture - Series E and AF

lenses don't have ears as is the case with some late

production AIS lenses.

An original AI mount is shown at left -

if the lens has been AI'd (or modified) from an older

non-AI, it will not have the Maximum Aperture

Indicator Post that is shown at the 6:00 position in

the picture

. The focusing ring configuration, colors of ADR number, etc.are not a sure indication that the lens is an original AI.Some

late production non-AI lenses have all the outward physical

appearances of AI lenses, but when modified they will not

have the post.

At left, an AI lens. To the right is a non-AI lens. Both are

50mm lenses. Note the differences in the 'ears', the coupling

ridges, and the absence of a lens speed post on the non-AI.

AIS (Automatic Index - Shutter) Lens

If there is a machined groove (Lens Type Signal Notch) in the

base of the lens, you have an AIS, Series E, or Auto Focus (AF)

lens. The purpose of the groove was to let the camera body know

that aperture stop down was linear.Your camera can take

advantage of AIS if it has a protruding pin on the camera lensmounting ring. If the pin is not on the camera body, it can't take

advantage of the AIS feature, but the lens will operate as AI.

Series E Lens


3/5

Series E 35mm/f2.5

If the lens does not have "ears", it is probably* a Series E lens or AF

lens. Series E lenses have the machined groove in the lens base like

the AIS lens, are manual focus, are marked as Series E and have an

ADR ring. Developed for the smaller Nikon EM camera bodies as a

consumer-grade lens and often denigrated for their build, Series E

lenses include some of the best optical values in the Nikon line. The line

included three zooms and five fixed focals; The prime lenses are: E

28mm f2.8; E 35mm f2.5; E 50mm f1.8; E 100mm f2.8; E 135mm f2.8.

The Series E Zoom lenses are: E 36-72mm f3.5, E 75-150mm f3.5 and

a E 70-210mm f4.0. The E series zooms are "

one-touch

" zooms - the same ring is used for zooming and focusing. * The word

'probably' was added after learning that some later production AIS

lenses were manufactured without 'ears'. Morale : Never say never.

AF - AIS Lens

When Nikon started making autofocus (AF) bodies in

response to other manufacturers, it incorporated AIS

lens technology as well as an in-camera focusing drive

motor. The AF - AIS lenses have the AIS groove

machined in the lens mounting plate and a slotted drive

screw inlet into the mounting plate at about the 5:30

position - there are no "ears" on the lens. At the 12:00position on the mounting plate, you will see 5 electrical

contacts. You will see these lenses normally marketed

as AF AIS. Focusing speed was not much to brag about

and Nikon later improved it.

Nikon 24-50mm/f3.3-f4.5 AF AIS

AF "D" Lens

Technology continued to improve as more functions were added to camera bodies. One

improvement was the ability to meter in "3-D" mode, an improvement which allows the body

(through a chip in the lens) to better assess distance from the focal plane to the object being

photographed. AF"D" lenses are marked on the lens barrel. These lenses also have the slotteddrive screw and 5 electrical contacts in the base plate. Note: There is at least one shop offering

after market addition of a lens chip to older lenses.

Nikon 70-210mm/f4-f5.6 AFD


4/5

AF "S" Lens

So, you're still hunting for the "perfect" lens eh ? How about a "silent wave" focusing lens with

an improved focusing speed over the older AF-AIS lenses? How to get this? Put a silent wave

focusing motor in the lens itselfto make it quiet. Note that not all AF bodies can autofocus with

these lenses because they lack the circuitry to drive the lens focusing motor. See the body/lenscompatability page for help.

IX Lens

The Nikon IX lenses

are made for the Nikon

APS

(Advanced Photo System) camera bodies (Pronea 6i and Pronea S) and are included here for

informational purposes only since they

can not be mounted to Nikon 35 mm cameras

even though they may appear to be 35 mm lenses. The rear elements of these lenses extend

back into the body and can not be mounted even if the 35 mm body provides true mirror lock

up (MLU). The Pronea 6i and Pronea S bodies can accept and use 35 mm AF lenses, so the

interoperability of this lens series is a one-way street.

AF "VR" Lens

AF VR Zoom Nikkor 80-400mm/4.5-5.6D

ED

The long awaited "VR" (Vibration Reduction)

lens was announced in January 2000 by Nikon.

With 2 VR modes, 1) VR for both the viewfinder

image and the image on film - a moderate VR

operation is activated ensuring viewing comfort

for the viewfinder image.and 2) VR for the

Image Plane only - reduces the possibility of

viewfinder-induced discomfort and conserves

battery power.

Features of the introductory lens included:

Detachable tripod mount; minimum focus of

7.5'; aperture range of f/4.5-f/32; 77mm filter;

A/M focus switch; focus lock and limiter;

cancellable VR operation and panning detection

in both horizontal and vertical operation. The

"new baby" weighs in at 40.5 oz. withoutthe

included tripod adapter. Canon "IS" envy can

now be gone - but watch your neck.

Along the way, there are several other Nikon lens nomenclatures that we missed - they don't

affect mounting to the body, but they affect the picture and your ability to control it:

CRC - Close Range Correction

- Lens adapted to reduce distortion when focused at macro lengths.


5/5

DC - Defocus Control

- the ability to control what zones are in or out of focus, handy for portraiture for one instance.

IF

- Internal Focus - lenses that don't "grow" or shrink in length as they are focused.

LD/ED/UD

-

L

ow/

Extra low/

U

ltra low

D

ispersion - Special glass that doesn't disperse the light as it enters the lens. Usually

encountered on later model telephoto lenses.

Micro

- What the rest of the world refers to as macro, a lens capable of focusing at a closer range

than normal.

NOCT

- Nocturnal - The Nikkor AIS Noct 58mm f/1.2, a "fast" lens (wide aperture), with asphericalelements, capable of photographs in very low light

PC - Perspective Control

- Tilting the lens in relation to the film focal plane - special effects.

UV

- Special lenses designed to pass ultra-violet light.

UW

- Special lenses designed for amphibious (underwater) use.

Nikon Lens Nomenclature - A Study in Frustration

Documents

Transcript of Nikon Lens Nomenclature - A Study in Frustration