NIDA SPECIFICATIONS - Bestech · 2017-01-18 · NIDA SPECIFICATIONS Nida Corporation 300 S John...

NIDA SPECIFICATIONS

Nida Corporation 300 S John Rodes Boulevard Melbourne FL 32904

Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

DC EXPERIMENT CARD SET MODEL 1401T, 1401 General Description

The DC experiment card set is designed for use with Nida Model 130 series training consoles*. The courseware introduces the students to the fundamentals of electricity. Emphasis is placed on understanding the laws of electricity as they relate to calculations and measurements of DC voltage, current and resistance in series, parallel and combinational circuits. DC circuit values are measured by standard test equipment to ensure students acquire the skills to safely work around electronic circuits.

*The 1401T is compatible with the Model 110E training console.

Card Specifications

Compatible with computer assisted instruction or traditional hard copy text materials.

Pre-assembled circuits require no assembly, jumper wires, or soldering.

Exposed components provide maximum technician accessibility.

Push-on, pull-off connections ensure self-cleaning of contacts.

Powered automatically by computer instruction or manual push-button action.

Nondestructive faults activated by computer instruction or manual push-button action.

Generated signals are measurable with standard test equipment.

Experiment Cards

Core – Model 1401T

Console Familiarzation PC130-CF Low E Measurments PC130-2 I Measurments PC130-4A Ohms Law PC130-5 Series Circuits PC130-6A Parallel Circuits PC130-8A Series-Parallel Circuits PC130-9A

Industrial – Model 1401

Console Familiarzation PC130-CF Low E Measurments PC130-2 I Measurments PC130-4A Ohms Law PC130-5 Series Circuits PC130-6A Parallel Circuits PC130-8A Series-Parallel Circuits PC130-9A Voltage Dividers PC130-9C Bridge Circuits PC130-10A Conn. Troubleshooting I PC130-W1 Conn. Troubleshooting II PC130-W2 Conn. Troubleshooting III PC130-W3

1401 DC-0501rev1-1005rev2-1007rev3-1012

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

AC EXPERIMENT CARD SET MODEL 1402T, 1402 General Description

The AC experiment card set is designed for use with Nida Model 130 series training consoles*. The courseware introduces students to alternating current generation, sine waves and AC circuit components. It teaches students to use AC test equipment on actual circuits and then reinforces AC theoretical concepts through experiments in inductance, capacitance, RL, RC, RCL, transients and resonance circuits.


Card Specifications








Experiment Cards Core – Model 1402T

Signal Measurement PC130-10 Capacitors/Inductors PC130-11 Capacitance Circuits PC130-12 Inductive Circuits PC130-13 RC Time Constants PC130-15 Series RCL Circuits PC130-17 Parallel RCL Circuits PC130-19 Transformers PC130-21 Relay Logic PC130-84B


Signal Measurement PC130-10 Capacitors/Inductors PC130-11 Capacitance Circuits PC130-12 Inductive Circuits PC130-13 RC Circuits A PC130-14A RC Circuits B PC130-14B RC Time Constants PC130-15 RL Filters PC130-16B Series RCL Circuits PC130-17 Series Resonance A PC130-18A Series Resonance B PC130-18B Parallel RCL Circuits PC130-19 Parallel Resonance A PC130-20A Parallel Resonance B PC130-20B Transformers PC130-21 Electrical Circuits I PC130-82 Electrical Circuits II PC130-83 Relay Logic PC130-84B Function Generator PC130-804

1402 AC-051801rev1-1005rev2-1007rev3-1012

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

ANALOG EXPERIMENT CARD SET MODEL 1403T, 1403 General Description

The Analog experiment card set is designed for use with Nida Model 130 series training consoles*. The courseware provides students with theoretical concepts that are immediately reinforced by experiments. In-depth topics include; semiconductor diodes, transistors, amplifiers, oscillators, multivibrator circuits and power supplies.


Card Specifications








Experiment Cards Core – Model 1403T Diodes I PC130-22A Diodes II PC130-22B Rectifier/Filter PC130-23 Bridge Rectifier/Filter PC130-24 Transistor Operation PC130-28 Transistor Bias PC130-29 Common Emitter PC130-30A Emitter Follower PC130-31 Common Base PC130-32 RC Coupled Amps PC130-33 Hartley Oscillator PC130-35 Astable Multivibrator PC130-44 Bistable Multivibrator PC130-45 Monostable Multivibrator PC130-46 FET Operation PC130-49 UJT Oscillator PC130-51 SCR Control Circuit, DC PC130-52A Limiters PC130-77A


Diodes I PC130-22A Diodes II PC130-22B Rectifier/Filter PC130-23 Bridge Rectifier/Filter PC130-24 Zener Ref. Reg. PC130-25 Voltage Regulator PC130-26 Voltage Doubler PC130-27 Transistor Operation PC130-28 Transistor Bias PC130-29 Common Emitter PC130-30A Emitter Follower PC130-31 Common Base PC130-32 RC Coupled Amps PC130-33 Comp. Symmetry PC130-34 Hartley Oscillator PC130-35 Colpitts Oscillator PC130-36 RC Phase Shift Osc. PC130-37 Local Osc. & Conv. PC130-38

Industrial – Model 1403 continued

IF Amplifiers PC130-39 PrAmp/Dr/Psh-Pl Amp

PC130-40 Blocking Oscillator PC130-42 Sawtooth Gen. PC130-43A Astable Multivibrator PC130-44 Bistable Multivibrator PC130-45 Monostable Multivibrator

PC130-46 Scmitt Trigger PC130-47N FET Operation PC130-49 Crystal Generator PC130-50 UJT Oscillator PC130-51 SCR Control Circuit, DC

PC130-52A SCR Control Circuit, AC

PC130-52B Operational Amp PC130-54 Low V Power Supply PC130-74 Limiters PC130-77A Clampers PC130-77B Triacs, Diacs, 4 Layer Diodes

PC130-88

1403 AN-052301rev1-1005rev2-1007rev3-1012

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

SOLDERING MODEL 1410

General Description

The Soldering Program, Model 1410 provides a comprehensive course on Soldering Safety and Electrostatic Sensitive Devices, Solder and Soldering Equipment, Wire Stripping, Tinning, and Splicing, Terminal Types and Connections, PCB Types and Manufacturing Methods, Through-Hole Non-Polarized Component Soldering and De-soldering, Through-Hole Polarized Component Soldering, Soldering Surface Mount Devices, and Coax Cable Connectors. This program is project based with hands-on preparing, repairing, mounting, soldering, and de-soldering components onto a PCB along with assembling BNC connectors and attaching to coaxial cables.

Consumable Components

1 ea. – Solder Project PC Board 1 ea. – Capacitor, Tantalum, 1µF, 35V 1 ea. – Capacitor, Tantalum, Solid, 10µF, 16V 2 ea. – Capacitor, Ceramic, Mini, .1µF, 50V 1 ea. – Diode, 1N4003, 200V, Rectifier 1 ea. – Diode, 1N4148, Signal 1 ea. – Dummy, Transistor, TO18 4 ea. – Resistor, Carbon Film, 100Ω, 5%, 1/4W 1 ea. – Dummy, Resistor, Surface Mount, 2512 1 ea. – Resistor, Potentiometer, Ceramic, PC, 1K 1 ea. – Dummy, IC, 20 Pin, Through Hole 1 ea. – Dummy, IC, 20 Pin, Surface Mount 5 ea. – Terminal, Bifurcated 5 ea. – Terminal, Turret 5 ea. – Terminal, Hook 5 ea. – Terminal, Pierced 5 ea. – Terminal, Cup 10 ft.. – Wire, Red/White, 22 AWG 1 ft. – Cable, RG58A/U, Stranded Core 1 ea. – Connector, BNC, UG-88C/U, Male, Plug, Clamp Note: Crimp/Cutter/Stripper Tool(s) required. Note: Consumables for 1 student.

Soldering1-0906rev2-1006

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

CIRCUIT CONSTRUCTION EXPERIMENT CARD SET MODEL 1413

General Description

The Circuit Construction experiment card set is designed for use with Nida Model 130 and Nida Model 110E training consoles. The courseware guides the students through the process of constructing an alarm circuit. DC, AC, Analog and Digital circuitry is utilized in a step by step procedure. The students will learn to read schematics, follow procedures, determine component values and verify the circuit operation.

Card Specifications








Experiment Cards

Experimental Breadboard

PC130-X

Note: Experiment Component Kit Diode, 1N914 – 2 each IC, 555 Timer – 1 each IC, 4049BE, Hex Inverting – 1 each Transistor, 2N2222A, NPN – 1 each SCR, C103Y – 1 each Resistor, CF, 5% 1/4W 100 – 1 each Resistor, CF, 5% 1/4W 680 – 1 each Resistor, CF, 5% 1/4W 1K – 2 each Resistor, CF, 5% 1/4W 1.2K – 1 each Resistor, CF, 5% 1/4W 1.5K – 1 each Resistor, CF, 5% 1/4W 2K – 1 each Resistor, CF, 5% 1/4W 2.2K – 2 each Resistor, CF, 5% 1/4W 3.3K – 2 each Resistor, CF, 5% 1/4W 4.7K – 2 each Resistor, CF, 5% 1/4W 6.8K – 1 each Resistor, CF, 5% 1/4W 10K – 3 each Resistor, CF, 5% 1/4W 15K – 1 each Resistor, CF, 5% 1/4W 27K – 2 each

Resistor, CF, 5% 1/4W 100K – 1 each Resistor, CF, 5% 1/4W 1.5M – 1 each Resistor, Pot, Cer, 5K – 1 each Resistor, Pot, Cer, 1M – 1 each Capacitor, Cer, .1µF 25V – 1 each Capacitor, Film, .5µF 100V – 1 each Capacitor, Elect, 470µF 50V – 2 each Capacitor, Elect, 4.7µF 40V – 1 each Capacitor, Elect, .47µF 100V – 1 each Switch, Tog, SPDT, Min – 2 each Switch, Mom, SPDT – 1 each Slide Switch – 1 each Relay, SPDT, Min, 12V, 1A – 1 each LED, Red, Short – 2 each LED, Green, Short – 1 each LED, Amber, Short – 1 each Jumper Wire, 2”, 22AWG – 5 each Jumper Wire, 2.5”, 22AWG – 5 each Jumper Wire, 3”, 22AWG

1413 Construct-0501rev1-1005rev2-1007

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

AUTOMOTIVE ELECTRONICS EXPERIMENT CARD SET MODEL 1431

General Description

The Automotive Electronics experiment card set is designed for use with Nida Model 130 and Nida Model 110E training consoles. The courseware teaches electricity and electronics from an automotive perspective. Experiments and troubleshooting taskes are performed on circuit cards that emulate automotive circuits. Traditional subjects such as Ohm’s Law, Series Circuits and Parallel Circuits are presented using examples from automotive systems and caculations that are based on actual values found in automotive circuitry.

Card Specifications








Experiment Cards

Ohm’s Law

PC130-701 Series Circuits

PC130-702 Parallel Circuits

PC130-703 Series-Parallel Circuits

PC130-704 Voltage Divider

PC130-705 Relay Operation

PC130-706

Inductors and Capacitors

PC130-707 Diodes

PC130-708 Transistors

PC130-709 AND Gates

PC130-710 OR Gates

PC130-711 NOT Gates

PC130-712

Air Conditioning & Engine

Cooling Fan PC130-713A

Combinational Logic Equivalent Circuit PC130-713B

Blinker System PC130-714

Starting System PC130-715

Injection System PC130-716

1431 Auto-0501rev1-1005rev21007

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

ELECTROMAGNETIC EXPERIMENT CARD SET MODEL 1435

General Description

The Electromagnetic experiment card set is designed for use with Nida Model 130 series training consoles. The courseware introduces the students to Magnetic Principles, Magnetism and Electromagnetism. For the hands-on portion of the course, students perform an experiment to observe magnetic poles, demonstrate temporary magnets and examine electromagnetic operation.

Card Specifications








Experiment Cards

Magnetism

PC130-182 Electromagnetics

PC130-183

1435 Elecmag-0501rev1-1005

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

PROJECT CERTIFICATION CARD SET MODEL 1461

General Description

The Project Certification Program is designed for use on the Model 130E or 110E training consoles. This competency based program supports the Electronics Technician Association International (ETA-I) EM1, EM2, EM3, and EM4 certification(s) requirements. The comprehensive, performance based package can be completed in approximately 100 hours.

Card Specifications

Compatible with computer assisted instruction.







Experiment Cards

DC Circuits – PN 99921401 Console Familiarization- PC130-CF Low E Measurements- PC130-2 I Measurements- PC130-4A Ohms Law- PC130-5 Series Circuits- PC130-6A Parallel Circuits- PC130-8A Series Parallel Circuits- PC130-9A

AC Circuits – PN 99921402 Signal Measurement- PC130-10 Capacitors/Inductors- PC130-11 Capacitance Circuits- PC130-12 Inductive Circuits- PC130-13 RC Time Constants- PC130-15 Series RCL Circuits- PC130-17 Parallel RCL Circuits- PC130-19 Transformers- PC130-21 Relay Logic- PC130-84B

Analog Circuits – PN 99921403 Diodes I-PC130-22A Diodes II-PC130-22B Rectifier/Filter-PC130-23 Bridge Rectifier/Filter-PC130-24 Transistor Operation-PC130-28 Transistor Bias-PC130-29 Common Emitter-PC130-30A Emitter Follower-PC130-31 Common Base-PC130-32 RC Coupled Amps-PC130-33 Hartley Oscillator-PC130-35 Astable Multivibrator-PC130-44 Bistable Multivibrator-PC130-45 Monostable Multivibrator-PC130-46 FET Operation-PC130-49 UJT Oscillator-PC130-51 SCR Control Circuit, DC-PC130-52A Limiters-PC130-77A

Digital Circuits – PN 99922105 Inverters- PC130-2402 Gates I- PC130-2404 Gates II- PC130-2406 Flip Flops I- PC130-2408 Flip FlopsII- PC130-2410 Counters I- PC130-2412 Counters II- PC130-2414 Encoder- PC130-2416 Decoder I- PC130-2418 Decoder II- PC130-2420 Shift Register- PC130-2422

1462ProjCert-0107rev2-0512rev3-1211

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

TRAILER WIRING EXPERIMENT CARD SET MODEL 1470

General Description

The Trailer Wiring experiment card set is designed for use with the Nida Model 130 series training console*. The courseware introduces the student to the kinds of problems associated with trailer wiring and the process of troubleshooting. The student is also introduced to the types of test instruments used for troubleshooting. A hands-on experiment is provided to reinforce the skills learned in theory.

*The 1470 is compatible with the Model 110E training console.

Card Specifications








Experiment Cards

Automobile PC130-720 Trailer PC130-721

Wire Harness, 10” – 1ea. Cable Assembly, Gator/Gator, Blk, 18” – 1 ea. Tool, Screwdriver

1470Trailer-0706rev2-1007

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

CAR AUDIO EXPERIMENT CARD SET MODEL 1471

General Description

The Car Audio experiment card set is designed for use with the Nida Model 130 series training console*. The courseware introduces the student to the components associated with car audio systems and describes their function. The steps in designing and the proper way to wire the audio system are discussed. A hands-on experiment is provided installing an audio system measuring the proper amounts of wire and connecting the devices together correctly.


Card Specifications








Experiment Cards

Power Distribution PC130-CAS1 Head Unit PC130-CAS2 Crossover PC130-CAS3 Two Channel Amplifier PC130-CAS4 (3)

Cable, RCA, M/M Stereo, 6ft – 4ea. Wire, Yellow, 22 AWG, 1.833” – 1ea. Wire, Blue, 22 AWG, 5.917” – 1ea. Wire, Violet, 22 AWG, 12” – 1ea. Wire, Green, 22 AWG, 12” – 1ea. Wire, Red, 22 AWG, 9.167” – 1ea. Wire, Blk, 22 AWG, 9.167” – 1ea. Wire, White/Grn, 22 AWG, 12” – 1ea. Wire, White/Violet, 22 AWG, 12” – 1ea. Tool, Screwdriver – 1ea. Speaker, SRS-P7 Passive Set – 3ea.

1471Audio-0706rev1-1007

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

DIGITAL-I ELECTRONICS EXPERIMENT CARD SET MODEL 2105T, 2105

General Description

The Digital experiment card set is designed for use with Nida Model 130 series training consoles*. The courseware introduces students to digital circuits, logic functions, D/A-A/D conversions and digital test equipment. The students learn how to analyze actual digital circuits through in-depth theory and practical hands-on experiments.

*The 2105 and 2105T are compatible with the Model 110E training console.

Card Specifications








Experiment Cards Core – Model 2105T Inverters PC130-2402 Gates I PC130-2404 Gates II PC130-2406 Flip-Flops I PC130-2408 Flip-Flops II PC130-2410 Counters I PC130-2412 Counters II PC130-2414 Encoder PC130-2416 Decoder I PC130-2418 Decoder II PC130-2420 Shift Register PC130-2422


Inverters PC130-2402 Gates I PC130-2404 Gates II PC130-2406 Flip-Flops I PC130-2408 Flip-Flops II PC130-2410 Counters I PC130-2412 Counters II PC130-2414 Encoder PC130-2416 Decoder I PC130-2418 Decoder II PC130-2420 Shift Register PC130-2422 Analog Switch PC130-2424 Arithmetic Unit PC130-2426 Memory PC130-2428 D/A Convertion PC130-2430 A/D Conversion PC130-2432

2105Digital-I0806rev1-1007rev2-1012

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

SKILLS PRACTICE EXPERIMENT CARD SET MODEL SP-P

General Description

The Skills Practice experiment card set is designed for use with the Nida Models 130E and 110E training consoles. Students will review and practice the three primary sections of the competition; troubleshooting, breadboarding, and soldering. The Skills Practice program is designed to assess the overall capabilities of the potential competitor by providing the theory of each section and enforcing each with performance-based scenarios.

Card Specifications








Experiment Cards

Console Familiarization PC130-CF Series Parallel Circuits PC130-9A Signal Measurement

PC130-10

Gates I

PC130-2404 Experimental Breadboard PC130-X

Also Included: See, RTDK1 specification See, 1413K1 specification @ nida.com/products/hardware/kits

SP-P Skills Practice 1011rev2-0112

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

DC EXPERIMENT CARD SET MODEL 1401T, 1401 General Description

The DC experiment card set is designed for use with Nida Model 130 series training consoles*. The courseware introduces the students to the fundamentals of electricity. Emphasis is placed on understanding the laws of electricity as they relate to calculations and measurements of DC voltage, current and resistance in series, parallel and combinational circuits. DC circuit values are measured by standard test equipment to ensure students acquire the skills to safely work around electronic circuits.


Card Specifications








Experiment Cards

Core – Model 1401T

Console Familiarzation PC130-CF Low E Measurments PC130-2 I Measurments PC130-4A Ohms Law PC130-5 Series Circuits PC130-6A Parallel Circuits PC130-8A Series-Parallel Circuits PC130-9A


Console Familiarzation PC130-CF Low E Measurments PC130-2 I Measurments PC130-4A Ohms Law PC130-5 Series Circuits PC130-6A Parallel Circuits PC130-8A Series-Parallel Circuits PC130-9A Voltage Dividers PC130-9C Bridge Circuits PC130-10A Conn. Troubleshooting I PC130-W1 Conn. Troubleshooting II PC130-W2 Conn. Troubleshooting III PC130-W3

1401 DC-0501rev1-1005rev2-1007rev3-1012

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

AC EXPERIMENT CARD SET MODEL 1402T, 1402 General Description

The AC experiment card set is designed for use with Nida Model 130 series training consoles*. The courseware introduces students to alternating current generation, sine waves and AC circuit components. It teaches students to use AC test equipment on actual circuits and then reinforces AC theoretical concepts through experiments in inductance, capacitance, RL, RC, RCL, transients and resonance circuits.


Card Specifications








Experiment Cards Core – Model 1402T

Signal Measurement PC130-10 Capacitors/Inductors PC130-11 Capacitance Circuits PC130-12 Inductive Circuits PC130-13 RC Time Constants PC130-15 Series RCL Circuits PC130-17 Parallel RCL Circuits PC130-19 Transformers PC130-21 Relay Logic PC130-84B


Signal Measurement PC130-10 Capacitors/Inductors PC130-11 Capacitance Circuits PC130-12 Inductive Circuits PC130-13 RC Circuits A PC130-14A RC Circuits B PC130-14B RC Time Constants PC130-15 RL Filters PC130-16B Series RCL Circuits PC130-17 Series Resonance A PC130-18A Series Resonance B PC130-18B Parallel RCL Circuits PC130-19 Parallel Resonance A PC130-20A Parallel Resonance B PC130-20B Transformers PC130-21 Electrical Circuits I PC130-82 Electrical Circuits II PC130-83 Relay Logic PC130-84B Function Generator PC130-804

1402 AC-051801rev1-1005rev2-1007rev3-1012

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

ANALOG EXPERIMENT CARD SET MODEL 1403T, 1403 General Description

The Analog experiment card set is designed for use with Nida Model 130 series training consoles*. The courseware provides students with theoretical concepts that are immediately reinforced by experiments. In-depth topics include; semiconductor diodes, transistors, amplifiers, oscillators, multivibrator circuits and power supplies.


Card Specifications








Experiment Cards Core – Model 1403T Diodes I PC130-22A Diodes II PC130-22B Rectifier/Filter PC130-23 Bridge Rectifier/Filter PC130-24 Transistor Operation PC130-28 Transistor Bias PC130-29 Common Emitter PC130-30A Emitter Follower PC130-31 Common Base PC130-32 RC Coupled Amps PC130-33 Hartley Oscillator PC130-35 Astable Multivibrator PC130-44 Bistable Multivibrator PC130-45 Monostable Multivibrator PC130-46 FET Operation PC130-49 UJT Oscillator PC130-51 SCR Control Circuit, DC PC130-52A Limiters PC130-77A


Diodes I PC130-22A Diodes II PC130-22B Rectifier/Filter PC130-23 Bridge Rectifier/Filter PC130-24 Zener Ref. Reg. PC130-25 Voltage Regulator PC130-26 Voltage Doubler PC130-27 Transistor Operation PC130-28 Transistor Bias PC130-29 Common Emitter PC130-30A Emitter Follower PC130-31 Common Base PC130-32 RC Coupled Amps PC130-33 Comp. Symmetry PC130-34 Hartley Oscillator PC130-35 Colpitts Oscillator PC130-36 RC Phase Shift Osc. PC130-37 Local Osc. & Conv. PC130-38

Industrial – Model 1403 continued

IF Amplifiers PC130-39 PrAmp/Dr/Psh-Pl Amp

PC130-40 Blocking Oscillator PC130-42 Sawtooth Gen. PC130-43A Astable Multivibrator PC130-44 Bistable Multivibrator PC130-45 Monostable Multivibrator

PC130-46 Scmitt Trigger PC130-47N FET Operation PC130-49 Crystal Generator PC130-50 UJT Oscillator PC130-51 SCR Control Circuit, DC


PC130-52B Operational Amp PC130-54 Low V Power Supply PC130-74 Limiters PC130-77A Clampers PC130-77B Triacs, Diacs, 4 Layer Diodes

PC130-88

1403 AN-052301rev1-1005rev2-1007rev3-1012

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

DIGITAL EXPERIMENT CARD SET MODEL 1404, 1404V, 1404T General Description

The Digital experiment card set is designed for use with Nida Model 130 series training consoles. The courseware introduces students to digital circuits, logic functions and digital test equipment. The students learn how to analyze actual digital circuits through in-depth theory and practical hands-on experiments.

Card Specifications








Experiment Cards

Card Name Card Name

1404 1404V 1404T 1404 1404V 1404T

Logic Circuit PC130-101 4 Bit Flip-Flop Reg. PC130-118

AND Gates PC130-102 4 Bit Shift Register PC130-119

NAND Gates PC130-103 Adder PC130-121 OR Gates PC130-104 Subtractor PC130-122

NOR Gates PC130-105 Number Systems PC130-124 Inverters and Buffers PC130-106 64 Bit Memory PC130-126

Exclusive OR Gates PC130-107 8 Bit Register PC130-127

Decimal Encoder PC130-108 R-S Flip-Flop (NAND) PC130-128

Binary Decoder PC130-109 Up Counter PC130-131 4 Bit Comparator PC130-110 Down Counter PC130-132

Clock Pulser PC130-111 Data Selector PC130-133

Clock Generator PC130-112 Data Distributor PC130-134

RS Flip-Flop (NOR) PC130-113 D/A Converter PC130-136

Type D Flip-Flop PC130-114 Master Slave F/F PC130-137

J-K Flip-Flop PC130-115 555 Timer PC130-153

Serial Counter PC130-116

1404 DI-052301rev1-1005

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

BASIC TRANSDUCERS EXPERIMENT CARD SET MODEL 1405B

General Description

The Basic Transducers experiment card set is designed for use with Nida Model 130 series training consoles. The courseware is designed to provide students with a solid foundation in the theory and operation of light, heat, motion, position and sound transducers. Developed from industry input and standards, Nida Basic Transducers lessons combine practical concepts and principles with hands-on experimentation. Students completing the courseware will possess a fundamental knowledge of transducer theory and the skills to successfully troubleshoot, align and repair transducer systems.

Card Specifications








Experiment Cards

Photoelectric Transducers

PC130-251 Temperature Transducers

PC130-252 Photoelectric Motion

Sensing PC130-255 Photoelectric Position

Sensing I PC130-256

1405B Trans-0902rev1-1005

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

TRANSDUCERS EXPERIMENT CARD SET MODEL 1405

General Description

The Transducers experiment card set is designed for use with Nida Model 130 series training consoles. The courseware is designed to provide students with a solid foundation in the theory and operation of light, heat, motion, position and sound transducers. Developed from industry input and standards, Nida Transducers lessons combine practical concepts and principles with hands-on experimentation. Students completing the courseware will possess a fundamental knowledge of transducer theory and the skills to successfully troubleshoot, align and repair transducer systems.

Card Specifications








Experiment Cards


PC130-251 Temperature Transducers

PC130-252 Photoelectric Motion

Sensing PC130-255 Photoelectric Position

Sensing I PC130-256 Photoelectric Position

Sensing II PC130-257 Digital to Analog Conversion

PC130-258

Analog to Digital Frequency

PC130-260 Analog to Pulse Modulation

PC130-261 Pulse Code Modulation

PC130-262 PCM Decoder PC130-269 Time Division Multiplexer

PC130-271 PAM, PWM, PPM Decoder

PC130-273 Signal Sources PC130-72

Cable, 8”, Blk, Fiber Optic – 1ea. Dip Clip, 14 Pin – 1ea. Dip Clip, 16 Pin – 1ea. Cable, Gator/Gator, 18”, Blk – 1ea. Cable, Micro Hook/Gator, 12”, Red – 1ea. Cable, Micro Hook/Micro Hook, 12”, Blk – 1ea.

1405 Trans-0501rev1-1005

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

FIBER OPTIC EXPERIMENT CARD SET MODEL 1406

General Description

The Fiber Optic experiment card set is designed for use with Nida Model 130 series training consoles. The courseware is designed to give students the skills and knowledge to identify and repair fiber optic cables, connectors and systems. The theoretical section teaches the principles of light, signal & signal loss, fiber optic components and fiber optics systems. The hands-on section introduces the student to fiber optics cable construction, connectorization and troubleshooting

Card Specifications








Experiment Cards


PC130-251 Fiber Optic Transmitter

PC130-301 Fiber Optic Receiver

PC130-302 Audio Driver PC130-303

Time Division Multiplexer

PC130-305 Time Division Demultiplexer

PC130-306 Quad Tone Generator

PC130-322 Digital Signal Source

PC130-323 Note: Serial Port Required Cutter/Crimper Required

Cable, BNC/BNC, 36” – 1 each Connector, BNC, Tee – 1 each Cable, Gator/Gator, 18”, Blk – 1 each Cable, Gator/Gator, 18”, Red – 1 each Cable, Fiber Optic 1m, Blk – 1 each Note: Fiber Optic Polishing Kit included Polish Paper 600 Grit 3”x3” – 2 each Lapping Film 3M 3”x3” – 2 each Anvil (polishing fixture) – 1 each Cleaning Cloth – 1 each Conn, Opto, TX, Gray – 2 each Conn, Opto, RX, Blue – 2 each Conn, Non-Perm, Mech. Splice – 1 each Cable, Fiber Optic, Gray – 18”

1406 Fiber-0501rev.1-1005rev.2-0906rev.3-0608rev.4-0210

NIDA SPECIFICATIONS

NIDA CORPORATION 300 S John Rodes Boulevard Melbourne FL 32904

Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

SIGNAL PROCESSING EXPERIMENT CARD SET MODEL 1407

General Description

The Signal Processing experiment card set is designed for use with Nida Model 130 series training consoles. The courseware topics include Time Division Multiplexing, Pulse Code Modulation, Frequency Division Multiplexing, Frequency Shift Keying Modulation and Phase Shift Keying Modulation. By integrating theoretical concepts with hands-on applications, the Nida Signal Processing course will prepare students for system level maintenance and troubleshooting.

Card Specifications








Experiment Cards

Time Division Multiplexer

PC130-305 Time Division Demultiplexer

PC130-306 Voltage Controlled Oscillator

PC130-86 AM Power Broadcast Band

Transmitter PC130-91 AM Broadcast Band Receiver

PC130-92 Quad Tone Generator PC130-322 Digital Signal Source PC130-323 Frequency Division Multiplexer

PC130-324 Frequency Division Demultiplexer

PC130-325 Pulse Code Modulator PC130-326

Pulse Code Demodulator

PC130-327 Frequency Shift Keying Modulator

PC130-328 PPL FM Modulator/Demodulator

PC130-336 Frequency Shift Keying

Demodulator PC130-329 Phase Shift Keying Modulator

PC130-330 Phase Shift Keying Demodulator

PC130-331 Digital Readouts PC130-284 Delta Modulator PC130-332 Delta Demodulator PC130-333 Experimental Breadboard

PC130-X

Note: AM/FM Component Kit included. PN 96901407 Diode, 1N34A – 3 each Transistor, 2N3565 – 1 each Transistor, 2N3823, FET – 1 each Resistor, CF, 1K 5% 1/4W – 2 each Resistor, CF, 2.2K 5% 1/4W – 2 each Resistor, CF, 10K 5% 1/4W – 5 each Resistor, CF, 47K 5% 1/4W – 1 each Resistor, CF, 100K 5% 1/4W – 1 each Resistor, CF, 220K 5% 1/4W – 1 each Capacitor, Cer, .022µF 25V – 1 each Capacitor, Cer, .05µF 25V – 2 each Capacitor, Cer, .01µF 25V – 2 each Capacitor, Cer, .001µF 1KV – 4 each Capacitor, Cer, .005µF 1KV – 2 each Capacitor, Elect, 4.7µF 40 V – 1 each Inductor, Mold, 500 µH – 1 each Inductor, Mold, 1 mH – 3 each Transformer, IF, 455kHz – 1 each Jumper, 2”x1/4”, PVC 22AWG – 20 ea.

1407 Signal-0501rev.1 1005

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

SOLDERING MODEL 1410

General Description

The Soldering Program, Model 1410 provides a comprehensive course on Soldering Safety and Electrostatic Sensitive Devices, Solder and Soldering Equipment, Wire Stripping, Tinning, and Splicing, Terminal Types and Connections, PCB Types and Manufacturing Methods, Through-Hole Non-Polarized Component Soldering and De-soldering, Through-Hole Polarized Component Soldering, Soldering Surface Mount Devices, and Coax Cable Connectors. This program is project based with hands-on preparing, repairing, mounting, soldering, and de-soldering components onto a PCB along with assembling BNC connectors and attaching to coaxial cables.

Consumable Components

1 ea. – Solder Project PC Board 1 ea. – Capacitor, Tantalum, 1µF, 35V 1 ea. – Capacitor, Tantalum, Solid, 10µF, 16V 2 ea. – Capacitor, Ceramic, Mini, .1µF, 50V 1 ea. – Diode, 1N4003, 200V, Rectifier 1 ea. – Diode, 1N4148, Signal 1 ea. – Dummy, Transistor, TO18 4 ea. – Resistor, Carbon Film, 100Ω, 5%, 1/4W 1 ea. – Dummy, Resistor, Surface Mount, 2512 1 ea. – Resistor, Potentiometer, Ceramic, PC, 1K 1 ea. – Dummy, IC, 20 Pin, Through Hole 1 ea. – Dummy, IC, 20 Pin, Surface Mount 5 ea. – Terminal, Bifurcated 5 ea. – Terminal, Turret 5 ea. – Terminal, Hook 5 ea. – Terminal, Pierced 5 ea. – Terminal, Cup 10 ft.. – Wire, Red/White, 22 AWG 1 ft. – Cable, RG58A/U, Stranded Core 1 ea. – Connector, BNC, UG-88C/U, Male, Plug, Clamp Note: Crimp/Cutter/Stripper Tool(s) required. Note: Consumables for 1 student.

Soldering1-0906rev2-1006

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

PHASE LOCKED LOOP EXPERIMENT CARD SET MODEL 1411

General Description

The Phase Locked Loop (PLL) experiment card set is designed for use with Nida Model 130 series training consoles. The courseware objectives will introduce the students to the PLL block diagram level defining PLL circuitry. PLL FM demodulators, PLL detector circuits and PLL error amplifier circuits. The students will observe the operation of a PLL system configured as a band pass filter, FM Demodulator and Frequency Synthesizer during a hands-on experiment.

Card Specifications








Experiment Cards

Voltage Controlled

Oscillator PC130-86

Frequency Multiplier/Divider PC130-224

Phase Detector PC130-225

1411 PLL-0501rev1-1005

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

CIRCUIT CONSTRUCTION EXPERIMENT CARD SET MODEL 1413

General Description

The Circuit Construction experiment card set is designed for use with Nida Model 130 and Nida Model 110E training consoles. The courseware guides the students through the process of constructing an alarm circuit. DC, AC, Analog and Digital circuitry is utilized in a step by step procedure. The students will learn to read schematics, follow procedures, determine component values and verify the circuit operation.

Card Specifications








Experiment Cards

Experimental Breadboard

PC130-X

Note: Experiment Component Kit Diode, 1N914 – 2 each IC, 555 Timer – 1 each IC, 4049BE, Hex Inverting – 1 each Transistor, 2N2222A, NPN – 1 each SCR, C103Y – 1 each Resistor, CF, 5% 1/4W 100 – 1 each Resistor, CF, 5% 1/4W 680 – 1 each Resistor, CF, 5% 1/4W 1K – 2 each Resistor, CF, 5% 1/4W 1.2K – 1 each Resistor, CF, 5% 1/4W 1.5K – 1 each Resistor, CF, 5% 1/4W 2K – 1 each Resistor, CF, 5% 1/4W 2.2K – 2 each Resistor, CF, 5% 1/4W 3.3K – 2 each Resistor, CF, 5% 1/4W 4.7K – 2 each Resistor, CF, 5% 1/4W 6.8K – 1 each Resistor, CF, 5% 1/4W 10K – 3 each Resistor, CF, 5% 1/4W 15K – 1 each Resistor, CF, 5% 1/4W 27K – 2 each

Resistor, CF, 5% 1/4W 100K – 1 each Resistor, CF, 5% 1/4W 1.5M – 1 each Resistor, Pot, Cer, 5K – 1 each Resistor, Pot, Cer, 1M – 1 each Capacitor, Cer, .1µF 25V – 1 each Capacitor, Film, .5µF 100V – 1 each Capacitor, Elect, 470µF 50V – 2 each Capacitor, Elect, 4.7µF 40V – 1 each Capacitor, Elect, .47µF 100V – 1 each Switch, Tog, SPDT, Min – 2 each Switch, Mom, SPDT – 1 each Slide Switch – 1 each Relay, SPDT, Min, 12V, 1A – 1 each LED, Red, Short – 2 each LED, Green, Short – 1 each LED, Amber, Short – 1 each Jumper Wire, 2”, 22AWG – 5 each Jumper Wire, 2.5”, 22AWG – 5 each Jumper Wire, 3”, 22AWG

1413 Construct-0501rev1-1005rev2-1007

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

OPTO-ELECTRONIC EXPERIMENT CARD SET MODEL 1414

General Description

The Optoelectronic experiment card set is designed for use with Nida Model 130 series training consoles. The courseware introduces the students to Infrared (IR) Transmission and Reception, IR Audio Transmission, IR Audio Reception and IR Fiberoptic Communications. Hands-on experiments provide an opportunity to trace signals and observe the operation of each circuit.

Card Specifications

Compatible with traditional hard copy text materials.




Powered by manual push-button action.

Nondestructive faults activated by manual push-button action.


Experiment Cards

IR Transmitter

PC130-214 IR Receiver

PC130-215 Photoelectric Transducers

PC130-251

Cable, Fiber Optic, Blk, 8” – 1ea

1414 Opto-0501rev1-1005

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

SEARCH RADAR EXPERIMENT CARD SET MODEL 1415

General Description

The Search Radar experiment card set is designed for use with Nida Model 130 series training consoles. The courseware introduces the students to basic radar principles utilizing a hands-on approach. The students learn radar concepts and terminology and builds on that knowledge by examining a typical radar timing circuit, a sweep & video amplifier and typical radar characteristics. The signals observed in the simulated radar are nearly identical to a full scale operational radar system.

Card Specifications








Experiment Cards

Radar Simulator Assembly

PC130-231

1415 Radar-0501rev1-1005

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

REGULATED POWER SUPPLY EXPERIMENT CARD SET MODEL 1416

General Description

The Regulated Power Supply experiment card set is designed for use with Nida Model 130 series training consoles. The courseware introduces the students to the basic operation of power supplies and teaches the operation and maintenance of voltage and current regulators. Typical variable voltage regulator and variable current limiter circuits are observed in hands-on experiments and non-damaging faults are inserted for troubleshooting practice.

Card Specifications








Experiment Cards

Current Regulator

PC130-96 Voltage Regulator

PC130-97 Loads

PC130-290

1416 RegPwr-0501rev1-1005

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

INTRODUCTION TO FILTERS EXPERIMENT CARD SET MODEL 1418

General Description

The Introduction to Filters experiment card set is designed for use with Nida Model 130 series training consoles. Students will be introduced to High-Pass, Low-Pass, Band-Pass, Band Reject and Combination Filters. Active and passive filters will be discussed along with inductive and capacitive reactance.

Card Specifications








Experiment Cards

High Pass Filter

PC130-145 Low Pass Filter

PC130-146 Band Pass Filter

PC130-147 Notch Filter

PC130-148

1418IntroFil-0501rev1-1005

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

OPERATIONAL AMPLIFIERS EXPERIMENT CARD SET MODEL 1419

General Description

The Operational Amplifiers experiment card set is designed for use with Nida Model 130 series training consoles. The students will be introduced to the characteristics, configurations and basic operation of operational amplifiers. Linear, Arithmetic and Wave Shaping amplifiers will be observed and non-damaging faults will be inserted for troubleshooting practice.

Card Specifications








Experiment Cards

Inverting/Non-Inverting Op

Amp PC130-161

Summing/Difference Op Amp PC130-162

Differential/Intergral Op Amp PC130-163

1419OpAmp-0501rev1-1005

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

BACKUP POWER SUPPLY EXPERIMENT CARD SET MODEL 1420

General Description

The Backup Power Supply experiment card set is designed for use with Nida Model 130 series training consoles. This course introduces the type of circuits used in AC backup power supplies. The course teaches a basic backup power supply that uses a 60Hz oscillator, op-amp comparator and a relay. The two-part experiment gives an opportunity to observe the operation of a typical backup AC power supply and to troubleshoot typical faults in the circuits.

Card Specifications








Experiment Cards

Backup Power Supply

PC130-293

1420 BckupPwr-0501rev1-1005

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

DIGITAL UPGRADE CARD SET MODEL 1424

General Description

The Model 1424 Digital Upgrade Card Set enhances Model 1404 Digital Circuits by adding lessons covering Bilateral Switches, D/A & A/D Conversions, and Tri-State devices. Model 1424 also adds enhanced theory lessons and experiments to Shift Registers and Memory. This upgrade to the Model 1404 will cover both TTL and CMOS technologies.

Card Specifications








Experiment Cards

Shift Register

PC130-2422

Analog Switch PC130-2424

Memory PC130-2428

Digital to Analog Conversion PC130-2430

Analog to Digital Conversion PC130-2432

DIupgrade-0109

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

DATA NETWORKS EXPERIMENT CARD SET MODEL 1428

General Description

The Data Networks experiment card set is designed for use with Nida Model 130 series training consoles. This course covers Broadband Networks, Network Topology, Serial Data Interfaces and Data Network Operations. During the hands-on portion of the lesson the students construct and observe an operational data network, identify relationships between data rate & bandwidths, examine frame formats & byte-oriented protocols and recognize & diagnose data frame collisions.

Card Specifications








Experiment Cards

Network Architecture

Interface PC130-345A

Network Architecture PC130-345 (3 ea.)

Included: Adaptor, 9 D-Sub – RJ11 Connector RJ11 – RJ11 Flat Satin 24” Straight Cable RJ45 – RJ45 12” Cable RJ45 – RJ45 4” Cable (2 each) RJ45 Loopback Plug, 3 to 5 & 4 to 6

.

1428 Network-1003rev1-1005

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

BASIC DIGITAL TELEPHONE EXPERIMENT CARD SET MODEL 1429

General Description

The Basic Digital Telephone experiment card set is designed for use with Nida Model 130 series training consoles. Students are introduced to the basic elements that make up communication systems describing the circuits and components contained in these systems. Bandwidth and noise are discussed as limiting factors. The hands-on portion of the lesson familiarizes the student with the operation of the telephone set and is then instructed to measure signals in the local loop of an electronic telephone set.

Card Specifications








Experiment Cards

Telephone Interface

PC130-337 (2 each)

Note: Two digital phones included.

1429 DigTel-0501rev1-1005

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

AUTOMOTIVE ELECTRONICS EXPERIMENT CARD SET MODEL 1431

General Description

The Automotive Electronics experiment card set is designed for use with Nida Model 130 and Nida Model 110E training consoles. The courseware teaches electricity and electronics from an automotive perspective. Experiments and troubleshooting taskes are performed on circuit cards that emulate automotive circuits. Traditional subjects such as Ohm’s Law, Series Circuits and Parallel Circuits are presented using examples from automotive systems and caculations that are based on actual values found in automotive circuitry.

Card Specifications








Experiment Cards

Ohm’s Law

PC130-701 Series Circuits

PC130-702 Parallel Circuits

PC130-703 Series-Parallel Circuits

PC130-704 Voltage Divider

PC130-705 Relay Operation

PC130-706

Inductors and Capacitors

PC130-707 Diodes

PC130-708 Transistors

PC130-709 AND Gates

PC130-710 OR Gates

PC130-711 NOT Gates

PC130-712

Air Conditioning & Engine

Cooling Fan PC130-713A

Combinational Logic Equivalent Circuit PC130-713B

Blinker System PC130-714

Starting System PC130-715

Injection System PC130-716

1431 Auto-0501rev1-1005rev21007

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

BASIC MOTORS EXPERIMENT CARD SET MODEL 1432

General Description

The Basic Motors experiment card set is designed for use with Nida Model 130 series training consoles. This course introduces the students to Rotating Machinery, DC Motors & Generators, Stepper Motors and AC Motors & Generators. Torque, counter electromotive force, loads, power and efficiency are discussed and reinforced with hands-on experiments measuring signals in the control circuits.

Card Specifications








Experiment Cards

DC Motor PC130-180 Stepper Motor PC130-181 Magnetism PC130-182 Electromagnetics PC130-183

1432Motor-0706rev2-0509

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

INTRODUCTION TO FIBER OPTICS EXPERIMENT CARD SET MODEL 1434

General Description

The Introduction to Fiber Optics experiment card set is designed for use with Nida Model 130 series training consoles. The courseware teaches the students the history of optical communications and how the technology evolved. Basic fiber optic cable construction, light propagation, principles of fiber optic communications, key advantages and limitations are discussed. A hands-on experiment demonstrates a simple fiber optic link utilizing fiber optic transmitter and receiver circuit cards.

Card Specifications








Experiment Cards

Fiber Optics Transmitter

PC130-301 Fiber Optics Receiver

PC130-302 Photoelectric Transducers

PC130-251

Cable, Black, Fiber Optic, 8” Note: Fiber Optic Polishing Kit included Polish Paper 600 Grit 3”x3” – 2 each Lapping Film 3M 3”x3” – 2 each Anvil (polishing fixture) – 1 each Cleaning Cloth – 1 each Conn, Opto, TX, Gray – 2 each Conn, Opto, RX, Blue – 2 each Conn, Non-Perm, Mech. Splice – 1 each Cable, Fiber Optic, Gray – 18”

1434 IntroFiber-0501rev1-0706rev2-1008

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

ELECTROMAGNETIC EXPERIMENT CARD SET MODEL 1435

General Description

The Electromagnetic experiment card set is designed for use with Nida Model 130 series training consoles. The courseware introduces the students to Magnetic Principles, Magnetism and Electromagnetism. For the hands-on portion of the course, students perform an experiment to observe magnetic poles, demonstrate temporary magnets and examine electromagnetic operation.

Card Specifications








Experiment Cards

Magnetism

PC130-182 Electromagnetics

PC130-183

1435 Elecmag-0501rev1-1005

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

ADVANCED DIGITAL TELEPHONE EXPERIMENT CARD SET MODEL 1436

General Description

The Advanced Digital Telephone experiment card set is designed for use with Nida Model 130 series training consoles. This course teaches and demonstrates two methods of signal processing and one type of transmission medium. The two signal processing methods covered, to a block diagram level, are analog time division multiplexing and digital pulse code modulation. The transmission medium covered is fiber optics, also to the block diagram level.

Card Specifications








Experiment Cards

Fiber Optics Transmitter

PC130-301 Fiber Optics Receiver

PC130-302 Audio Driver

PC130-303 Time Division Multiflexer

PC130-305

Time Division Demultiplexer

PC130-306 Quad Tone Generator

PC130-322 Pulse Code Modulator

PC130-326 Pulse Code Demodulator

PC130-327

Included: Cable, Fiber Optic, Gray, 36”

Note: Requires Basic Digital Telephone Experiment card set model 1429

1436 AdvTel-0501rev1-1005

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

AVIONICS DATA COMMUNICATIONS EXPERIMENT CARD SET MODEL 1438D

General Description

The Avionics Data Communications experiment card set is designed for use with Nida Model 130 series training consoles. Students will identify systems and instrumentation that use data communication, describe how communications systems use protocol to transfer data and observe the transmission and reception of serial data during a hands-on experiment. The electrical characteristics of both RS232 and RS485 are identified while measuring line interface voltages as data is being transferred and received. Bus systems are explored by describing the operational characteristics and actual measurement of signals.

Card Specifications








Experiment Cards

RS232 & RS485 Interface PC130-232 (2ea.) Digital Transmission Serial

(Sender) PC130-265 Digital Transmission Serial

(Receiver) PC130-266

Tri-State Transmission

Parallel (Sender) PC130-267 Tri-State Transmission

Parallel (Receiver) PC130-268 Digital Readout Assembly PC130-284

1438D AvionDataComm-0902

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

AIRCRAFT ELECTRONIC SYSTEMS EXPERIMENT CARD SET MODEL 1438E

General Description

The Aircraft Electronic Systems experiment card set is designed for use with the Nida Model 130E training console. Students will be introduced to Aircraft Instrument Systems and Aircraft Communications Systems. Topics include Tachometer, Torque, & Position-Indicating Systems, Temperature & Fuel Flow Indicating Systems, Pressure Sensing & Chip Detection Systems, Aircraft Master Warning & Annunciator Systems, and Aircraft Antenna Systems. Students will first be taught the theory of each then apply each with a hands-on troubleshooting experiment using standard test equipment.

Card Specifications








Experiment Cards

Temperature Control PC130-189 Temperature Display PC130-190 Barometer Circuit I

PC130-241

Barometer Circuit II

(Display) PC130-242 AC to DC Generator PC130-735 Master Warning &

Annunciators PC130-737

1438E Aircraft Electronic Sys 1011

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

AIRCRAFT ELECTRICAL EXPERIMENT CARD SET MODEL 1438P

General Description

The Aircraft Electrical experiment card set is designed for use with the Nida Model 130E training console. Students will be introduced to Aircraft Wiring and Aircraft Power. The various types of wires, cables, connectors, and tools are covered in theory then they build actual wire & cable assemblies and test the continuity of each. Aircraft Power covers batteries, DC & AC generation, basic aircraft & multi-engine aircraft power distribution systems each with a hands-on experiment emphasizing troubleshooting.

Card Specifications








Experiment Cards

DC Motor/Generator PC130-180 Cable Tester I PC130-W6 Cable Tester II

PC130-733 Poer Distribution System

PC130-734 AC to DC Generator

PC130-735

Split Bus Distribution

System PC130-736 Troubleshooting Logic PC130-739 Power Generation PC130-740 Power Distribution PC130-741 Systems PC130-742

Cockpit Wiring PC130-746 Bulkhead Harness

Connection PC130-747 Aircraft Lighting PC130-748 Also Included: Model 1410 Soldering Program (see separate specification)

1438P Aircraft Electrical 1011

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

AIRCRAFT ELECTRICAL SYSTEMS EXPERIMENT CARD SET MODEL 1438S

General Description

The Aircraft Electrical Systems experiment card set is designed for use with the Nida Model 130E training console. Students will be introduced to Aircraft Airframe Systems and Aircraft Engine Systems. The following systems are covered; Aircraft Lighting, Aircraft Ice & Rain Protection, Environmental Control, Landing Gear, Aircraft Braking, Fire Warning & Extinguishing, Aircraft Fuel, and Aircraft Ignition. Students will first be taught the theory of each then apply each with a hands-on troubleshooting experiment using standard test equipment.

Card Specifications








Experiment Cards

Aircraft Environment Power

Source PC130-731 Aircraft Environment

Thermostat PC130-732 Aircraft Heat Valve Control

PC130-733 Fire Warning System

PC130-738 Landing Gear I

PC130-743

Landing Gear II PC130-744 Landing Gear III PC130-745 Incandescent Lights PC130-749 Interior Lights PC130-750 Strobe Light PC130-751 Exterior Lights PC130-752

1438S Aircraft Electrical Sys 1011

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

8051 MICRO-CONTROLLER EXPERIMENT CARD SET MODEL 1439

General Description

The 8051 Micro-controller experiment card set is designed for use with Nida Model 130 series training consoles. This course describes the internal structure, timed operations, external timing & control connections, memory connections and the connection of input/output devices. The students interface with the 8051 by entering a simple program, observing various signals generated by the 8051, the operation of external memory and signals of the keypad circuitry in the microcontroller system.

Card Specifications








Experiment Cards

8 Bit Controller

PC130-405 Keyboard/Display

Pc130-406 I/O and Interface

PC130-407

Cable Assembly, Flat, 34 pos. (2ea)

1439 M8051-0501rev1-1005

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

8085 MICROPROCESSOR EXPERIMENT CARD SET MODEL 1440

General Description

The 8085 Microprocessor experiment card set is designed for use with Nida Model 130 series training consoles. This course first introduces the basic operation of microprocessors and the use and manipulation of binary numbers. Students will measure signals, observe the system timing, examine external and input/output circuits in operation. An additional experiment is provided for troubleshooting techniques.

Card Specifications








Experiment Cards

Keypad and Display

PC130-400 Microprocessor I/O

PC130-401 Memory and Address

Decoder PC130-402

8085 Microprocessor PC130-485

Cable Assembly, Flat, 20 Pos. 6.5” Cable Assembly, Flat, 20 Pos. 2.75” Cable Assembly, Flat, 30 Pos. 2.75”

1440 M8085-0501rev20406

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

8086 MICROPROCESSOR EXPERIMENT CARD SET MODEL 1441

General Description

The 8086 Microprocessor experiment card set is designed for use with Nida Model 130 series training consoles. Students will be introduced to the internal structure of the 8086 processor. The operation of the 8086 is described by examining signal conditions and observing memory interface signals. Data transfers, computer subtraction and addition, logic instructions and jump instructions are performed during practical hands-on experiments.

Specifications

Experiment Cards Keypad and Display PC130-404 Microprocessor I/O PC130-401 8086 Microprocessor PC130-410 Memory Card Assembly PC130-411 Software Includes complete monitoring package for keypad, LCD, and interrupt subroutine control. All interrupt instructions are MS-DOS compatible to facilitate additional software development. Capable of accepting new program instructions through I/O card serial port. Executes basic self-diagnostic programs or built-in tests. PC interface capable. Hardware Fixed I/O devices include keypad and 4X20-character LCD. I/O experiment card utilizes three 8-bit, parallel port, bi-directional connections, and one RS232 serial port.

All parallel port bit I/O information is LED indicated. Linkable to other Nida experiment card set applications, specifically, D to A and A to D Conversion,

Ultrasonic - Studies, DC Motor Closed Loop Operation with Fiber Optic Link, Temperature Closed Loop Operation, and Sound Capture programs.

Contains expandable static RAM (SRAM) slots to increase from 64K to 128K, or 64K with added EEPROM.

Accepts an array of non-destructive faults (single or multiple) for system troubleshooting practice. Contains numerous stand-off test points for easy test equipment connection when monitoring operational

signals. Includes system expansion connector for future device connection.

1441 M8086-1001rev1-0706

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

TEMPERATURE CONTROL SYSTEMS EXPERIMENT CARD SET MODEL 1442

General Description

The Temperature Control Systems experiment card set is designed for use with Nida Model 130 series training consoles. The theoretical section of the software identifies the principles and properties of temperature measurement and heat dissipation, principles of basic heat sensors and temperature transducers and the process of a digital temperature display and audio/visual temperature warning systems. Students will perform hands-on experiments analyzing the operations of temperature transducers and control and temperature displays and warnings.

Card Specifications








Experiment Cards

Temperature Control PC130-189 Temperature Display PC130-190 Temperature Alarm PC130-191

1442TempControl-0806

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

PROGRAMMABLE LOGIC DEVICES EXPERIMENT CARD SET MODEL 1443

General Description

The Programmable Logic Devices experiment card set is designed for use with Nida Model 130 series training consoles. Students will identify and describe the basic programmable logic device array structure, the architecture of PLD’s and the minimizing processes. During hands-on experiments, students will describe the PLD programming and verification process, program a generic array logic (GAL) device and verify the operation of a GAL device.

Card Specifications








Experiment Cards

Programmable Logic Device PC130-158

Note: Requires Galep-III Multi-Programmer or equivalent and ISP Synario or equivalent Not included.

1443ProgLogic-0906rev1-0808

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

AM COMMUNICATIONS EXPERIMENT CARD SET MODEL 1444

General Description

The AM Communications experiment card set is designed for use with Nida Model 130 series training consoles. The students will define and understand amplitude modulation, identify the components of a typical AM receiver and be able to describe their functions. During hands-on experimentation, students will examine the operation of AM receiver circuits and learn to troubleshoot utilizing schematic analysis along with logical troubleshooting procedures.

Card Specifications








Experiment Cards

AM Digital Control PC130-438 AM Amplifier/Mixer/IF Amp PC130-439 AM Detector & Audio Amp PC130-440

1444 DigAM-0501rev1-0706

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

FM COMMUNICATIONS EXPERIMENT CARD SET MODEL 1445

General Description

The FM Communications experiment card set is designed for use with Nida Model 130 series training consoles. The merits and deficiencies of FM versus AM, terminology associated with FM, FM generation methods and methods of tuning are described. Schematic analysis of FM receiver circuits are performed during hands-on experimentation along with troubleshooting and performing receiver alignment.

Card Specifications








Experiment Cards

FM Digital Control PC130-441 FM Amplifier/Mixer/IF Amp PC130-442 FM Detector & Audio Amp PC130-443

1445 DigFM-0501rev1-0706

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

AM/CB TRANSCEIVER EXPERIMENT CARD SET MODEL 1446

General Description

The AM Transceiver experiment card set is designed for use with Nida Model 130 series training consoles. Transmitter and receiver block diagrams, high level modulation, amplitude modulation, VSWR and SWR are described. During hands-on experiments, major sections of a CB transceiver are examined and signals are observed. Non-destructive faults are inserted that students are required to localize and isolate.

Card Specifications








Experiment Cards

CB Digital Control PC130-444 CB Amplifier/Mixer/IF Amp PC130-445 CB Detector & Audio Amp PC130-446

1446 DigCB-0501rev1-0706

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

SSB COMMUNICATIONS EXPERIMENT CARD SET MODEL 1447

General Description

The SSB Communications experiment card set is designed for use with Nida Model 130 series training consoles. Students will analyze and examine the Single Side Band transmitter and receiver circuits. Observing the normal operation of a typical SSB system is performed during a hands-on experiment along with identifying and troubleshooting faults.

Card Specifications








Experiment Cards

Input, Mic, Sine Wave

Generator PC130-450 Generator, Audio Subcarrier PC130-451 Generator, RF Carrier PC130-452

RF Detector PC130-453 Audio Detector PC130-454 Speaker Driver PC130-455

1447 SSB-0501rev1-0706

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

NBFM COMMUNICATIONS EXPERIMENT CARD SET MODEL 1448

General Description

The NBFM Communications experiment card set is designed for use with Nida Model 130 series training consoles. Students will understand Narrow Band FM theory and analysis and observe signals associated with NBFM systems. The particulars of troubleshooting NBFM equipment and identifying faults in a typical NBFM system are performed during hands-on experiments.

Card Specifications








Experiment Cards

Transmitter PC130-456 Receiver PC130-457

1448 NBFM-0501rev1-0906

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

WIRING AND CONNECTOR TROUBLESHOOTING CARD SET MODEL 1449

General Description

The Wiring and Connector Troubleshooting experiment card set is designed for use with Nida Model 130 series training consoles. The Model 1449 includes PCB Component Insertion/Extraction, Soldering, Connector Termination and Wire Wrapping Techniques. Basic troubleshooting is discussed followed by a hands on experiment emphasizing a logical troubleshooting procedure.

Card Specifications








Experiment Cards

Connector Troubleshooting 1 PC130-W1 Connector Troubleshooting 2 PC130-W2 Connector Troubleshooting 3 PC130-W3

Included: BNC to BNC, 8”

1449 Wire-0501rev10406

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

DC PERFORMANCE TESTING CARD SET MODEL 1451

General Description

The DC Performance Testing card set is designed for use with the Nida Model 130E training console. It provides a performance assessment for the DC block of the Nida Basic Electronics program. Students will demonstrate their skills by performing hands-on troubleshooting experiments. Circuit measurements, troubleshooting, and problem solving are assessed using a scenario based format that emulates problems found on the job.

Card Specifications





Powered automatically by computer instruction.

Non-destructive faults activated by computer instruction.


Experiment Cards

Low Voltage Measurements PC130-2

Current Measurements PC130-4A

Series Parallel Circuits PC130-9A

Voltage Divider PC130-9C

Conn. Troubleshooting I PC130-W1

Conn. Troubleshooting II PC130-W2

Conn. Troubleshooting III PC130-W3

1451DC_PerfTesting-0811

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

AC PERFORMANCE TESTING CARD SET MODEL 1452

General Description

The AC Performance Testing card set is designed for use with the Nida Model 130E training console. It provides a performance assessment for the AC block of the Nida Basic Electronics program. Students will demonstrate their skills by performing hands-on troubleshooting experiments. Circuit measurements, troubleshooting, and problem solving are assessed using a scenario based format that emulates problems found on the job.

Card Specifications








Experiment Cards

Signal Measurement PC130-10

RC Circuits A PC130-14A

RC Circuits B PC130-14B

RL Filters PC130-16B

Series Resonance A PC130-18A

Transformers PC130-21

Relay Logic PC130-84B

Function Generator PC130-804

1452AC_PerfTesting-0811

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

ANALOG CIRCUITS PERFORMANCE TESTING CARD SET MODEL 1453

General Description

The Analog Circuits Performance Testing card set is designed for use with the Nida Model 130E training console. It provides a performance assessment for the Analog Circuits block of the Nida Basic Electronics program. Students will demonstrate their skills by performing hands-on troubleshooting experiments. Circuit measurements, troubleshooting, and problem solving are assessed using a scenario based format that emulates problems found on the job.

Card Specifications








Experiment Cards

Diodes I PC130-22A

Diodes II PC130-22B

Rectifier/Filter PC130-23

Zener Reference Regulator PC130-25

Voltage Regulator PC130-26

Common Emitter PC130-30A

Emitter Follower PC130-31

Common Base PC130-32

Local Osc & Converter PC130-38

IF Amplifiers PC130-39

PrAmp/Dr/Psh-Pl Amp PC130-40

Blocking Oscillator PC130-42

Sawtooth Generator, LV PC130-43A

Astable Multivibrator PC130-44

Bistable Multivibrator PC130-45

Monostable Multivibrator PC130-46

SCR Control Circuit, DC


PC130-52B Operational Amplifier

PC130-54 Limiters

PC130-77A Clampers

PC130-77B

1453Analog_PerfTesting-0811

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

DIGITAL CIRCUITS PERFORMANCE TESTING CARD SET MODEL 1454

General Description

The Digital Circuits Performance Testing card set is designed for use with the Nida Model 130E training console. It provides a performance assessment for the Digital Circuits block of the Nida Basic Electronics program. Students will demonstrate their skills by performing hands-on troubleshooting experiments. Circuit measurements, troubleshooting, and problem solving are assessed using a scenario based format that emulates problems found on the job.

Card Specifications








Experiment Cards

Logic Circuit PC130-101

AND Gates PC130-102

NOR Gates PC130-105

Inverters & Buffers PC130-106

Decimal Encoder PC130-108

Binary Decoder PC130-109

4-Bit Comparator PC130-110

Clock Pulsar PC130-111

Clock Generator PC130-112

RS Flip-Flop (NOR) PC130-113

J-K Flip Flop PC130-115

Serial Counter PC130-116

4-Bit Flip-Flop Register

PC130-118 Adder

PC130-121 64 Bit Memory

PC130-126 Data Selector

PC130-133 Data Distributor

PC130-134

1454DigitalCircuits_PerfTesting-0811

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

PERFORMANCE TESTING CARD SET MODEL 1456

General Description

The Performance Testing card set is designed for use with the Nida Model 130E training console. It provides a performance assessment for each block of the Nida Basic Electronics program. Students will demonstrate their skills by performing hands-on troubleshooting experiments. Circuit measurements, troubleshooting, and problem solving are assessed using a scenario based format that emulates problems found on the job.

Card Specifications






Nondestructive faults activated by computer instruction.


Experiment Cards Low Voltage Measurements PC130-2 Current Measurements PC130-4A Series Parallel Circuits PC130-9A Voltage Divider PC130-9C Conn. Troubleshooting I PC130-W1 Conn. Troubleshooting II PC130-W2 Conn. Troubleshooting III PC130-W3 Function Generator PC130-804 Bridge Circuits PC130-10 RC Circuits PC130-14A RC Circuits PC130-14B RL Circuits PC130-16B Series Resonance PC130-18A Transformers PC130-21 Diodes PC130-22A Diodes PC130-22B Rectifier/Filter PC130-23 Zener Reference Regulator PC130-25 Voltage Regulator PC130-26

Common Emitter PC130-30A Emitter Follower PC130-31 Common Base PC130-32 Local Oscillator & Converter PC130-38 IF Amplifiers PC130-39 Pre-Amp/Driver/Push Pull Amp PC130-40 Blocking Oscillator PC130-42 LWVLT SWTH Assy PC130-43A Astable Multivibrator PC130-44 Bistable Multivibrator PC130-45 Monostable Multivibrator PC130-46 SCR Control Circuit DC PC130-52A SCR Control Circuit AC PC130-52B Operational Amplifier PC130-54 Limiters PC130-77A Clampers PC130-77B Relay Logic PC130-84B

Logic Circuits PC130-101 AND Gates PC130-102 NOR Gates PC130-105 Inverters and Buffers PC130-106 Decimal Encoder PC130-108 Binary Decoder PC130-109 4 Bit Comparitor PC130-110 Clock Pulsar PC130-111 Clock Generator PC130-112 RS Flip-Flop (NOR) PC130-113 J-K Flip-Flop PC130-115 Serial Counter PC130-116 4 Bit Flip-Flop Register PC130-118 Adder PC130-121 64 Bit Memory PC130-126 Data Selector PC130-133 Data Distributor PC130-134

1456PerfTesting-0107rev2-0908

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

CABLES AND CONNECTORS PROGRAM MODEL 1459

General Description

The Cables and Connectors program provides an introduction to several common types of wire and cable, associated connector hardware, and the physical and electrical checks required to verify the functionality of assembled cables. Troubleshooting of wire and connector deficiencies is stressed through simulations as well as actual cable continuity tests that utilize industry standard test equipment. Practical exercises require students to assemble various cables using the specific wires, connectors, and tools provided. Consumables for 1 student.

Card Specifications








Experiment Cards

Cable Test 1 – PC130-W6 Cable Test 2 – PC130-W7 Tools: Needle nose pliers Diagonal cutting pliers Cutter/Splicer Open barrel crimper D-Sub Crimper/Stripper RJ11 Crimper/Stripper RJ45 Open barrel crimper F-Type Punchdown Coaxial crimper Coaxial stripper Screwdriver

Note: Consumables for 1 student.

Connector types: 2 ea. - Coupler, fml, nylon insulated 2 ea. - Conn., butt slice, 22awg 4 ea. - Housing, fml, 4 pos. 16 ea. - Terminal, fml 4 ea. - Conn. jack, telephone, 4 pos. 11 ea. - Conn., RJ45, 8 pos., unkeyed 3 ea. - Conn., RJ45, Cat 5, EIA 568A 2 ea. - Conn., 9 pin, D-sub, receptacle 2 ea. - Conn., 9 pin, D-sub, plug 18 ea. - Pin, crimp, male, D-sub, 20awg 18 ea. - Pin, crimp, fml, D-sub, 20awg 4 ea. - Cover, 9 pin, D-sub 4 ea. - Conn., BNC, male, cable mnt 4 ea. - Conn., BNC, fml, cable mnt

Wire and Cable types: 4 ea. - Wire, 8”, 22awg, red 2 ea. - Wire, 8”, 22awg, black 2 ea. - Wire, 8”, 22awg, blue 4 ea. - Wire, 8”, 22awg, yellow 2 ea. - Cable, 14”, 4 cond., flat, satin 2 ea. - Cable, 14”, 8 cond., flat, satin 3 ea. - Cable, 14”, 4 pair, Cat 5, twisted 1 ea. - Cable, 32”, 4 pair, Cat 5, twisted 2 ea. - Cable, 14”, 9 Cond.. 2 ea. - Cable, 14”, coax, RG58 2 ea. - Cable, 14”, coax, RG59

1459CC-0701rev1-0306rev2-0107rev3-0808

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

D/A AND A/D EXPERIMENT CARD SET MODEL 1460

General Description

The D/A and A/D experiment card set is designed for use with Nida Model 130 series training consoles. The students will identify the principles of A/D conversion, describe the various discrete frequency circuits and the operation of drivers, buffers and tri-state devices. The principles of serial or parallel D/A conversion terms and circuits are identified. Students will analyze the operation of an ADC080X 8-bit µP-compatible A/D converter for A/D FLASH conversion and the operation of an integrated D/A circuit during hands-on experiments.

Card Specifications








Experiment Cards

Digital to Analog PC130-140 Analog to Digital PC130-139

Optional: Speaker Driver PC130-455

.

1460DA/AD-0702rev10806

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

PROJECT CERTIFICATION CARD SET MODEL 1461

General Description

The Project Certification Program is designed for use on the Model 130E or 110E training consoles. This competency based program supports the Electronics Technician Association International (ETA-I) EM1, EM2, EM3, and EM4 certification(s) requirements. The comprehensive, performance based package can be completed in approximately 100 hours.

Card Specifications








Experiment Cards

DC Circuits – PN 99921401 Console Familiarization- PC130-CF Low E Measurements- PC130-2 I Measurements- PC130-4A Ohms Law- PC130-5 Series Circuits- PC130-6A Parallel Circuits- PC130-8A Series Parallel Circuits- PC130-9A

AC Circuits – PN 99921402 Signal Measurement- PC130-10 Capacitors/Inductors- PC130-11 Capacitance Circuits- PC130-12 Inductive Circuits- PC130-13 RC Time Constants- PC130-15 Series RCL Circuits- PC130-17 Parallel RCL Circuits- PC130-19 Transformers- PC130-21 Relay Logic- PC130-84B

Analog Circuits – PN 99921403 Diodes I-PC130-22A Diodes II-PC130-22B Rectifier/Filter-PC130-23 Bridge Rectifier/Filter-PC130-24 Transistor Operation-PC130-28 Transistor Bias-PC130-29 Common Emitter-PC130-30A Emitter Follower-PC130-31 Common Base-PC130-32 RC Coupled Amps-PC130-33 Hartley Oscillator-PC130-35 Astable Multivibrator-PC130-44 Bistable Multivibrator-PC130-45 Monostable Multivibrator-PC130-46 FET Operation-PC130-49 UJT Oscillator-PC130-51 SCR Control Circuit, DC-PC130-52A Limiters-PC130-77A

Digital Circuits – PN 99922105 Inverters- PC130-2402 Gates I- PC130-2404 Gates II- PC130-2406 Flip Flops I- PC130-2408 Flip FlopsII- PC130-2410 Counters I- PC130-2412 Counters II- PC130-2414 Encoder- PC130-2416 Decoder I- PC130-2418 Decoder II- PC130-2420 Shift Register- PC130-2422

1462ProjCert-0107rev2-0512rev3-1211

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655 www.nida.com

CET EXPERIMENT CARD SET MODEL 1462

General Description

The CET experiment card set is designed for use with the Nida Model 130 training console. It is a component of the Project Certification Program Model 1461.

Card Specifications • Compatible with computer assisted instruction or traditional hard copy text materials. • Pre-assembled circuits require no assembly, jumper wires, or soldering. • Exposed components provide maximum technician accessibility. • Push-on, pull-off connections ensure self-cleaning of contacts. • Powered automatically by computer instruction or manual push-button action. • Nondestructive faults activated by computer instruction or manual push-button action. • Generated signals are measurable with standard test equipment. Experiment Cards • PWM Switching Power

Supply PC130-85A • Voltage Controlled

Oscillator PC130-86 • Clock Pulsar PC130-111 • Clock Generator PC130-112

• FRQ MLTP/DVDR Assy PC130-224 • Phase Detector PC130-225 • Loads PC130-290

1462CET-0207

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

MOTOROLA 68000 MICROPROCESSOR EXPERIMENT CARD SET MODEL 1468

General Description

The Motorola 68000 Microprocessor experiment card set is designed for use with Nida Model 130 series training consoles. Students will define the different package styles, identify the address, data and control buses, identify the operation of the clock and reset circuits and the microprocessor interrupts. Programming and hands-on experiments ensure the understanding of instruction code and the effects of executing a program.

Card Specifications








Experiment Cards

Microprocessor I/O PC130-401 Chip Select/Memory PC130-403 Keyboard/Display PC130-404 68000 Processor Assembly PC130-468

Flat Cable, 20 con. (2 ea.) Flat Cable, 50 con. (1 ea.)

1468 M68000-0501rev1-0706

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

TRAILER WIRING EXPERIMENT CARD SET MODEL 1470

General Description

The Trailer Wiring experiment card set is designed for use with the Nida Model 130 series training console*. The courseware introduces the student to the kinds of problems associated with trailer wiring and the process of troubleshooting. The student is also introduced to the types of test instruments used for troubleshooting. A hands-on experiment is provided to reinforce the skills learned in theory.


Card Specifications








Experiment Cards

Automobile PC130-720 Trailer PC130-721

Wire Harness, 10” – 1ea. Cable Assembly, Gator/Gator, Blk, 18” – 1 ea. Tool, Screwdriver

1470Trailer-0706rev2-1007

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

CAR AUDIO EXPERIMENT CARD SET MODEL 1471

General Description

The Car Audio experiment card set is designed for use with the Nida Model 130 series training console*. The courseware introduces the student to the components associated with car audio systems and describes their function. The steps in designing and the proper way to wire the audio system are discussed. A hands-on experiment is provided installing an audio system measuring the proper amounts of wire and connecting the devices together correctly.


Card Specifications








Experiment Cards

Power Distribution PC130-CAS1 Head Unit PC130-CAS2 Crossover PC130-CAS3 Two Channel Amplifier PC130-CAS4 (3)

Cable, RCA, M/M Stereo, 6ft – 4ea. Wire, Yellow, 22 AWG, 1.833” – 1ea. Wire, Blue, 22 AWG, 5.917” – 1ea. Wire, Violet, 22 AWG, 12” – 1ea. Wire, Green, 22 AWG, 12” – 1ea. Wire, Red, 22 AWG, 9.167” – 1ea. Wire, Blk, 22 AWG, 9.167” – 1ea. Wire, White/Grn, 22 AWG, 12” – 1ea. Wire, White/Violet, 22 AWG, 12” – 1ea. Tool, Screwdriver – 1ea. Speaker, SRS-P7 Passive Set – 3ea.

1471Audio-0706rev1-1007

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

DIGITAL-I ELECTRONICS EXPERIMENT CARD SET MODEL 2105T, 2105

General Description

The Digital experiment card set is designed for use with Nida Model 130 series training consoles*. The courseware introduces students to digital circuits, logic functions, D/A-A/D conversions and digital test equipment. The students learn how to analyze actual digital circuits through in-depth theory and practical hands-on experiments.

*The 2105 and 2105T are compatible with the Model 110E training console.

Card Specifications








Experiment Cards Core – Model 2105T Inverters PC130-2402 Gates I PC130-2404 Gates II PC130-2406 Flip-Flops I PC130-2408 Flip-Flops II PC130-2410 Counters I PC130-2412 Counters II PC130-2414 Encoder PC130-2416 Decoder I PC130-2418 Decoder II PC130-2420 Shift Register PC130-2422


Inverters PC130-2402 Gates I PC130-2404 Gates II PC130-2406 Flip-Flops I PC130-2408 Flip-Flops II PC130-2410 Counters I PC130-2412 Counters II PC130-2414 Encoder PC130-2416 Decoder I PC130-2418 Decoder II PC130-2420 Shift Register PC130-2422 Analog Switch PC130-2424 Arithmetic Unit PC130-2426 Memory PC130-2428 D/A Convertion PC130-2430 A/D Conversion PC130-2432

2105Digital-I0806rev1-1007rev2-1012

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

DIGITAL EXPERIMENT CARD SET MODEL 2404

General Description

The Digital experiment card set is designed for use with Nida Model 130 series training consoles. The courseware introduces students to digital circuits, logic functions and digital test equipment utilizing both TTL and CMOS technologies. The students learn how to analyze actual digital circuits through in-depth theory and practical hands-on experiments.

Card Specifications








Experiment Cards

Logic Circuit PC130-101 AND Gates PC130-102 NAND Gates PC130-103 OR Gates PC130-104 NOR Gates PC130-105 Inverters and Buffers PC130-106 Exclusive OR Gates PC130-107 Decimal Encoder PC130-108 Binary Decoder PC130-109 4 Bit Comparator PC130-110 Clock Pulsar PC130-111

Clock Generator PC130-112 RS Flip-Flop (NOR) PC130-113 Type D Flip-Flop PC130-114 J-K Flip-Flop PC130-115 Serial Counter PC130-116 4 Bit Flip-Flop Reg. PC130-118 Adder PC130-121 Subtractor PC130-122 Number Systems PC130-124 R-S Flip-Flop (NAND) PC130-128 Up Counter PC130-131

Down Counter PC130-132 Data Selector PC130-133 Data Distributor PC130-134 Master Slave F\F PC130-137 555 Timer PC130-153 Shift Register PC130-2422 Bilateral Switch PC130-2424 Memory PC130-2428 D/A Conversion PC130-2430 A/D Conversion PC130-2432

2404 DI-0109

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

NIDA MODEL 3301 – BASIC MICROWAVE SYSTEM

General Description

The Nida Model 3301 Basic Microwave System is designed for use with Nida 130 Series training consoles. Basic Microwave teaches the principles of microwave transmission and reception. The courseware topics include, Introduction to Microwave, Basic Microwave System, Antennas, and Microwave Reflectors. Advanced options include, Microwave Communications, Standing Wave Ratio (SWR) Measurements, and Microwave Reflection.

Features

Waveguide assemblies utilize MIL Spec W8 in accordance with WG M85/1-078. Assemblies terminated with flanges to be modified cover flanges per MIL F3922/53-003. Waveguide material uses a 6061 aluminum alloy, dipped brazed and heat treated resulting in a T5 hardness condition. Curriculum available in traditional textbook manuals and computer assisted instruction (CAI). Program presents microwave theory with applications in microwave hardware, circuitry, and systems. Printed circuit assemblies connect onto the 130 test console with all power supply connections and voltage

polarity made automatically.

Specifications

Dielectric Resonant Oscillator: Output Freq.: 10.5 GHz Mechanical Tuning: +/- 100 MHz Min Output Power: + 10 dBm min Freq. Stability: 10 ppm / C° Max Freq. Deviation: 10 MHz Min Control Voltage: 0 – 10 VDC 25 Max RF Connector: UG-39/U Control Connector: Filter Feed-Thru Power Supply: + 12 VDC

Down Converter: RF Input Freq.: 10.5 GHz Max RF Power: + 20 dBm Conversion Loss: 8 dBm Max Noise Figure: 9 dBm Max Mechanical Tuning: 100 MHz Min RF Connector: UG-39/U IF Connector: SMA - female Freq. Deviation: 10 MHz Min Freq. Stability: 10 ppm / C° Max Power Supply: + 12 VDC

Other: Microwave Oscillator & Modulator PC130-307 Microwave Receiver PC130-308 15 dB Transmit/Receiver Horn (2ea) Waveguide Stand (3ea) Waveguide Clamps (3ea) Hardware Set 6” Straight Waveguide (2ea) Reflector Plate (1ea)

3301BasicMicro-0601rev1-0306

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655 www.nida.com

NIDA MODEL 3302 – MICROWAVE COMMUNICATIONS OPTIONS

General Description

The Nida Model 3302 - Microwave Communications Options enhances the Model 3301 - Basic Microwave System which is required but not included with this option. The Model 3302 contains thirteen individual printed circuit cards covering the following topics: Basic Communications, Analog Communication Signals, and Digital Communication Signals.

Features • Designed to teach the principles and operation of microwave communications technology. • Prepares technicians for microwave system maintenance. • Signal Input and Output capability. • Pre-assembled circuits require no assembly, jumper wires, or soldering. • Exposed components provide maximum technician accessibility. Specifications Printed Circuit Cards: • Audio Driver PC130-303 • Time-Division Multiplexer PC130-305 • Time-Division Demultiplexer PC130-306 • Quad Tone Generator PC130-322 • Digital Signal Source PC130-323 • Freq. Division Multiplexer PC130-324 • Freq. Division Demultiplexer PC130-325 • Pulse Code Modulator PC130-326 • Pulse Code Demodulator PC130-327 • Freq. Shift Keying Modulator PC130-328 • Freq. Shift Keying Demodulator PC130-329 • Phase Shift Keying Modulator PC130-330 • Phase Shift Keying Demodulator PC130-331

Required but not included: • Nida Model 130 Test Console (2) • Nida Model 3301 – Basic Microwave System • Oscilloscope • Function Generator with Counter • Analog/Digital Multimeter • Non-Magnetic Screwdriver Included: Cable, Gator/Gator, Blk, 18” Cable, Gator/Gator, Red, 18”

3302MicroComm-0601rev1-0306

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

NIDA MODEL 3303 – MICROWAVE SWR MEASUREMENTS OPTIONS

General Description

The Nida Model 3303 – Microwave SWR Measurements Options enhances the Model 3301 – Basic Microwave System which is required but not included with this program. The Model 3303 is designed to teach methods of measuring and observing standing wave ratios in a microwave system. The program covers basic SWR, slide screw, and wavemeter measurements.

Features

Prepares technicians for microwave system maintenance. Signal Input and Output capability. Pre-assembled circuits require no assembly, jumper wires, or soldering. Exposed components provide maximum technician accessibility.

Specifications

Included with SWR Measurements Options: PC130-304 circuit card – SWR/dB Meter BNC Cable Assembly – 60 inches Wavemeter – 10.5 GHz Slide Screw Tuner Crystal Detector Cross Guide Coupler Slotted Line Detector Slotted Line Detector Probe Terminator Directional Coupler Shorting Plate Waveguide Stand (2) Waveguide Stand (Mod Kit) (2) Waveguide Clamps (2) Hardware Set (24)

Required but not included: Nida Model 130 Test Console (2) Nida Model 3301 – Basic Microwave System Oscilloscope Function Generator with Counter Analog/Digital Multimeter Non-Magnetic Screwdriver

3303MicroSWR-0601

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

NIDA MODEL 3304 – MICROWAVE REFLECTIONS OPTIONS

General Description

The Nida Model 3304 – Microwave Reflections Options enhances the Model 3301 – Basic Microwave System which is required but not included with this program. The Model 3304 is designed to teach the characteristics of microwave beams. The topics include basic reflections and polarization and demonstrates the reflectivity principles of microwave energy.

Features

Prepares technicians for microwave system maintenance. Signal Input and Output capability. Pre-assembled circuits require no assembly, jumper wires, or soldering. Exposed components provide maximum technician accessibility.

Specifications

Included with Microwave Reflections Options: 6” Straight Waveguide Azimuth Mount 90 Degree Twists (2) Polarization Grating 8” Parabolic Reflector Hardware Set (8)

Required but not included: Nida Model 130 Test Console (2) Nida Model 3301 – Basic Microwave System Oscilloscope Function Generator with Counter Analog/Digital Multimeter Non-Magnetic Screwdriver

3304MicroReflec-0601

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

RF COMMUNICATIONS EXPERIMENT CARD SET MODEL 4444

General Description

The RF Communications experiment card set is designed for use with Nida Model 130 series training consoles. The programs teach the theory of operation, troubleshooting, and repair of standard AM/FM broadcast band receivers and AM/SSB/NBFM communications transceivers. Students learn basic system composition, the RF spectrum, atmospheric effects on radio waves, the heterodyning process, modulation techniques, AF/RF and RF/AF conversions, phase-locked loop and manual tuning operations, AGC, crystal and voltage controlled oscillators and antenna theory.

Card Specifications








Experiment Cards

AM Digital Control PC130-438 AM Amplifier/Mixer/IF Amp PC130-439 AM Detector & Audio Amp PC130-440 FM Digital Control PC130-441 FM Amplifier/Mixer/IF Amp PC130-442 FM Detector & Audio Amp PC130-443

CB Digital Control PC130-444 CB Amplifier/Mixer/IF Amp PC130-445 CB Detector & Audio Amp PC130-446 SSB Input, Mic, Sine Wave

Generator PC130-450 SSB Generator, Audio

Subcarrier PC130-451

SSB Generator, RF Carrier PC130-452 SSB RF Detector PC130-453 SSB Audio Detector PC130-454 SSB Speaker Driver PC130-455 NBFM Transmitter PC130-456 NBFM Receiver PC130-457

4444 RF-0501rev1-0306

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

SKILLS PRACTICE EXPERIMENT CARD SET MODEL SP-P

General Description

The Skills Practice experiment card set is designed for use with the Nida Models 130E and 110E training consoles. Students will review and practice the three primary sections of the competition; troubleshooting, breadboarding, and soldering. The Skills Practice program is designed to assess the overall capabilities of the potential competitor by providing the theory of each section and enforcing each with performance-based scenarios.

Card Specifications








Experiment Cards

Console Familiarization PC130-CF Series Parallel Circuits PC130-9A Signal Measurement

PC130-10

Gates I

PC130-2404 Experimental Breadboard PC130-X

Also Included: See, RTDK1 specification See, 1413K1 specification @ nida.com/products/hardware/kits

SP-P Skills Practice 1011rev2-0112

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

HOME ENERGY SYSTEMS EXPERIMENT CARD SET MODEL 3601

General Description

The Home Energy Systems experiment card set is designed for use with the Nida Model 360S training console. The student starts off by first being introduced to the needs, elements, and energy conversion technologies of renewable energy systems and sources & site surveys. Other courseware topics include home solar energy system fundamentals, home wind energy system fundamentals, home hybrid energy system fundamentals, home energy system maintenance & diagnostics, and malfunctions & troubleshooting all taking a “systems thinking” approach with an emphasis on troubleshooting.

Card Specifications Requires the Nida Model 360S Systems Trainer. Compatible with the Nida Pro ILE or SCORM 2004 packages learning content. Pre-assembled, turn-key circuit cards require no assembly, jumper wires, or soldering. Exposed components and test points provide maximum technician accessability. Self-cleaning connections and contacts ensure reliability and alignment. Power and non-destructive faulting provided by learning content computer interface. Generated signals, circuit signal flow, and outputs measurable with standard electronic test equipment. Convenient circuit card storage container included.

Experiment Cards

Energy Display – ES101 Energy Output – ES102 Battery and Load Banks – ES104 Wind Turbine/Generator – ES105 Home Energy Control – ES106 Solar PV Array – ES107

Also Included:

Wind Turbine Assembly

Storage Box

3601 Home-0511

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

COMMERCIAL WIND ENERGY SYSTEMS EXPERIMENT CARD SET MODEL 3602

General Description

The Commercial Wind Energy Systems experiment card set is designed for use with the Nida Model 360S training console. The student starts off by first being introduced to the needs, elements, and energy conversion technologies of renewable energy systems and sources & site surveys. Other courseware topics include wind turbine systems fundamentals, 3-phase power fundamentals, turbine maintenance & diagnostics, and turbine malfunctions & troubleshooting all taking a “systems thinking” approach with an emphasis on troubleshooting.


Experiment Cards

Energy Display – ES101 Energy Output – ES102 Battery and Load Banks – ES103 Wind Turbine – ES110 Yaw and Pitch Position – ES111 Wind Turbine Control – ES112

Also Included:

Wind Turbine Assembly

Storage Box

3602 Wind-0311rev2-1011

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

COMMERCIAL SOLAR ENERGY SYSTEMS EXPERIMENT CARD SET MODEL 3603

General Description

The Commercial Wind Solar Systems experiment card set is designed for use with the Nida Model 360S training console. The student starts off by first being introduced to the needs, elements, and energy conversion technologies of renewable energy systems and sources & site surveys. Other courseware topics include solar thermal system fundamentals, solar photovoltaic system fundamentals, solar photovoltaic maintenance & diagnostics, and solar photovoltaic malfunctions & troubleshooting all taking a “systems thinking” approach with an emphasis on troubleshooting.

Card Specifications

Requires the Nida Model 360S Systems Trainer. Compatible with the Nida Pro ILE or SCORM 2004 packages learning content. Pre-assembled, turn-key circuit cards require no assembly, jumper wires, or soldering. Exposed components and test points provide maximum technician accessability. Self-cleaning connections and contacts ensure reliability and alignment. Power and non-destructive faulting provided by learning content computer interface. Generated signals, circuit signal flow, and outputs measurable with standard electronic test equipment. Convenient circuit card storage container included.

Experiment Cards

Energy Display – ES101 Energy Output – ES102 Battery and Load Banks – ES103 Solar PV Array – ES107 Solar Tracking – ES108 Solar PV Control – ES112

Also Included:

Storage Box

3603 Solar-0411rev2-1011

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

POWER DISTRIBUTION EXPERIMENT CARD SET MODEL 3604

General Description

The Power Distribution experiment card set is designed for use with the Nida Model 360S training console. The student starts off by first being introduced to 3-Phase Fundamentals and Power Transmission & Distribution Fundamentals. Other courseware topics include 3-Phase & Single-Phase Service Feeds, Power Transmission & Distribution Maintenance, and Power Grid Troubleshooting, all taking a “systems thinking” approach with an emphasis on hands-on troubleshooting.


Experiment Cards

Power Station – ES151 Power Display – ES152 Volt-Amp-Reactive – ES153 Peaker Plants – ES154 3-Phase Substations – ES155 Split-Phase – ES156

3604 PowerDistribution 0512

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

AC MOTORS EXPERIMENT CARD SET MODEL 3606

General Description

The AC Motors experiment card set is designed for use with the Nida Model 360S training console. The student is introduced to Single-Phase and 3-Phase Motor Familiarization followed by Universal Motor Operation, Shaded-Pole Motors, Split-Phase Motors, Permanent Split Capacitor Motors, Capacitor Start Motors, Capacitor Start/Capacitor Run Motors, 3-Phase Wye/Star Motors, 3-Phase Delta Motors, 3-Phase Wye/Star-Delta Motor Starters, 3-Phase Resistive & Inductive Motor Starters, and AC Motor Frequency & Voltage Controllers, all taking a “systems thinking” approach with an emphasis on hands-on troubleshooting. Also included are Motor Nameplates and AC Motor Braking Methods.


Experiment Cards

Power Supply – MO151 Control & Display – MO152 Motor – MO153 Single/Split Phase Motor – MO154 3-Phase Motors – MO155 3-Phase Starters – MO156

Also Included: 9 ea. – Wire, 18AWG, Stranded, Tinned Ends, Black, 10” 8 ea. – Wire, 18AWG, Stranded, Tinned Ends, Black, 5”

3606 AC Motors 0512

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

SONAR SYSTEMS EXPERIMENT CARD SET MODEL 3650

General Description

The Sonar Systems experiment card set is designed for use with the Nida Model 360S training console. The student starts off by first being introduced to sonar and the principles of sonar. Other courseware topics include oceanography, basic sonar transmitter, receiver, and processing. With an emphasis on taking a “systems approach” to troubleshooting, the student continues with active sonar systems operation & troubleshooting, passive sonar systems operation & troubleshooting, and ships fitted sonar equipment.


Experiment Cards

Active Sonar

Sonar Oscillator/PFN – MS101 Active Sonar Display – MS102 Sonar RX Amp – MS103 Sonar TX Amp – MS104 Active Sonar Control – MS105 Headset Amplifier – MS106

Passive Sonar

Oscillator/Analysis – MS107 Passive Sonar Display – MS108 Sonar Processor – MS109 Hydrophone 1 – MS110 Passive Sonar Control – MS111 Hydrophone 2 – MS112

Also Included:

Active Sonar Transducer Assembly Hydrophone – 2 each

3650 Sonar-0611

NIDA SPECIFICATIONS


Phone (321) 727-2265 FAX (321) 727-2655

www.nida.com

ADVANCED PLC EXPERIMENT CARD SET MODEL 1450

General Description

The Nida Model 5050 trainer uses the Allen Bradley MicroLogix 1200 PLC which includes a central processing unit with built-in 24 volt power supply, external communications capability, 12 input, and 8 output relays. In addition, the digital input module contains 16 input channels that are user selectable for voltage to support a variety of monitoring and controlling applications. Two user selectable analog inputs and outputs are provided in a single slot module. The Advanced PLC experiment card set will further develop skills necessary to create ladder logic programs.

Card Specifications








Experiment Cards

Traffic Lights PC5050-3 Elevators PC5050-4 Power Management PC5050-7 Security Systems PC5050-5 Amusement Rides PC5050-6

Note: Requires RSLogix software

1450 PLC-1104rev1-0306

NIDA SPECIFICATIONS - Bestech · 2017-01-18 · NIDA SPECIFICATIONS Nida Corporation 300 S John...

Documents

Transcript of NIDA SPECIFICATIONS - Bestech · 2017-01-18 · NIDA SPECIFICATIONS Nida Corporation 300 S John...