nGenius Integrated Agent for Cisco ISR

Agenda• AXP/IOS Requirements• nGenius Integrated Agent Functionality• Router configuration• Screenshots• Requesting a POC• Questions?

AXP/IOS requirements

IOS images for AXP

• Releases 12.4(24)T2 or 15.0(1)M1 and higher• Types• IP-Base• IP-Voice• Adv-Enterprise• Adv-Security• Universal-G2 (29xx,39xx) routers. Release 15 only.

nGenius Integrated Agent for Cisco ISRSix primary components

Cisco• ISR

• 2811, 2821, 2851, 3825, 3845, 2911, 2921, 2951, 3925 or 3945

• IOS• Version supported with AXP 1.5.3 and

higher

• Service Module• NME-APPRE-502-K9• NME-APPRE-522-K9• SM-SRE-700-K9• SM-SRE-900-K9

• AXP 1.5.3 and higher

NetScout• nGenius Integrated Agent

(IA1100) • nGenius Performance Manager

(or Workgroup)

Cisco ISR

AXP 1.5.3 and highernGenius Integrated Agent

nGenius Integrated Agent Functionality

Monitor Branch WAN & LAN Traffic

Continuously monitor traffic destined to/from WAN from router backplane

Optionally monitor LAN traffic from external Service Module interface

Cisco ISR

Cisco IOS Software

Disk Resources

CPUCPU MemoryMemory

GIGE GIGE Aux USBEth1

NME or SRE Service Module

AXP OS

nGenius Integrated Agent

Eth0

GIGE

CPU

Memory

GIGEW

ANATM

The Value of Extending VisibilityUsing nGenius Integrated Agent for Cisco ISR

• Continuously monitor traffic destined for WAN • Localized packet capture for troubleshooting

LAN without dispatching a technician• Enables more accurate response time analysis• Facilitates site-to-site monitoring in

decentralized networks (MPLS, VRF aware)• Validates WAN optimized traffic• Unified, end-to-end views and reporting• Regain visibility to traffic going off net (cloud

services)• Layer 2-7 visibility

Provides unified, pervasive and consistent visibility to the branch office and across the enterprise.

Router Configuration

Router configurationinterface Integrated-Service-Engine1/0 ip address 10.1.1.1 255.255.255.252 service-module ip address 10.1.1.2 255.255.255.252 service-module ip default-gateway 10.1.1.1

ip traffic-export profile ngenius_agent interface Integrated-Service-Engine1/0 bidirectional mac-address 0080.8c00.0001

ntp server 10.10.10.79

<session to AXP module>service-module integrated-Service-Engine 1/0 session

Router configuration cont’dhostname axp.test_moduleip ssh serverusername sysadmin password <password>clock timezone America/Chicagoip name-server 10.10.10.253ntp server 10.10.10.79 preferntp server 10.11.12.13

Router configuration cont’dinterface eth0 ip address 10.1.1.2 255.255.255.252 exit

interface eth1 ip address 10.1.1.5 255.255.255.252

app-service integrated_agent bind interface eth0 bind interface eth1

exit copy running-config startup-config

nGenius Agent configuration (from AXP)

connect consolesoftware install package {integrated_agent.4.7.pkg | url {sftp| ftp} ://server-

ip-address/package-filename.pkg} [username <FTP user ID> password <FTP server password>]

date MMDDhhmmYYYYcd /opt/NetScout/rtm/bin./start./localconsole (configure all agent options from here)

Screenshots

Branch site views

Evidence retrieved from the alarm condition indicates poor response times for the “netscoute” application for the specific user at this branch office

Branch site-to-site data

Key views for the remote branch office. Site-to-site traffic, application traffic, worst performing apps, and VoIP call details

Branch decode

You can capture ad-hoc or event triggered data and filter down to the specific data you need, rather than bring everything across the WAN from your decode.

Requesting a POC

How to request a POChttp://www.netscout.com/products/enterprise/nSAS/IDS/packet_flow/Pages/nGenius_Integrated_Agent_Eval.aspx

How to request a POC cont’d

Questions?