NexBladeXB10J - NCS Technologies, Inc. · NexBladeXB10J • Rackmount 7U • Supports 2 Intel...

2
NexBladeXB10J Rackmount 7U Supports 2 Intel 64-bit Xeon Processors per node, up to 10 blade servers per enclosure Supports up to 40 SATA hard drives Up to 128 GB of DDR3 per node Innovation... Delivered.

Transcript of NexBladeXB10J - NCS Technologies, Inc. · NexBladeXB10J • Rackmount 7U • Supports 2 Intel...

Page 1: NexBladeXB10J - NCS Technologies, Inc. · NexBladeXB10J • Rackmount 7U • Supports 2 Intel 64-bit Xeon Processors per node, up to 10 blade servers per enclosure • Supports up

NexBladeXB10J

Rackmount 7U•Supports 2 Intel 64-bit Xeon Processors •per node, up to 10 blade servers per enclosure Supports up to 40 SATA hard drives•Up to 128 GB of DDR3 per node•

Innovation... Delivered.

Page 2: NexBladeXB10J - NCS Technologies, Inc. · NexBladeXB10J • Rackmount 7U • Supports 2 Intel 64-bit Xeon Processors per node, up to 10 blade servers per enclosure • Supports up

+1 (703) 743-8500www.ncst.com

CPU:

Supports up to two Intel® 64-bit Xeon® processor(s) of same type per node, 2 nodes per blade, up to 10 blades per enclosureLGA 1366 SocketIntel® Xeon® Processor X5600/E5600/L5600 Series (Westmere) 40W - 95WIntel® Xeon® Processor X5500/E5500/L5500 Series (Nehalem-EP) 38W - 95W

Chipset: Intel® 5500 (Tylersburg) chipsetICH10R + IOH-24D

BIOS: 32Mb SPI Flash EEPROM with AMI® BIOS

System Memory:8x 240-pin DIMM socketsSupports up to 128 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memorySupports up to 32 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory

HDD Support: Intel ICH10R SATA 3.0Gbps ControllerRAID 0, 1 support

I/O Port: SUV (Serial/USB/Video) & KVM Connector

Drive Bay: 2x 2.5" SATA Hot-swap drive bays per node

Graphics: Integrated Matrox G200eW Graphics

Infiniband Support: 4x QDR / DDR (40/20Gb/s) InfiniBand mezzanine HCA (Optional)

Network Controllers:Intel® 82576 Dual-Port Gigabit EthernetIntel® I/OAT 3 support for fast, scaleable, and reliable networkingVMDq support for better performance of virtualization

Gigabit Ethernet Switch / Pass-Through Module:

Supports up to two hot-plug 1/10 Gigabit Ethernet Layer 2/3 switch modules

Management Module: Supports one hot-plug management modules providing remote KVM and IPMI 2.0 functionalities

Power Supply: Two or four hot-swap 2500W power supplies, N+1 redundant

Dimensions: 12.1" x 18.5" x 29" (HxWxD)

Form Factor: 7U Rackmount

Cooling: Up to 16 cooling fans

Operating Environment: Operating Temperature: 10º to 35º C (50º to 95º F), Non-Operating Temperature: -40º to 70º C (-40º to 158º F)

Innovation... Delivered.