New SteelForce - Split · zz28-700 zz36-700 zz38-700 zz40-700 zz42-700 zz44-700 zz46-700 zz48-700...
Transcript of New SteelForce - Split · zz28-700 zz36-700 zz38-700 zz40-700 zz42-700 zz44-700 zz46-700 zz48-700...
Foundation Solutionswww.steelforce.ae
CONTENT
About Us 1
Sheet Piles 2
Sheet Pile Corner Sections 13
Combination Wall Systems 14
� U-Piles 3
� Z-Sections 7
� Omega Piles 10
� Straight Web Piles 11
� Tubular / Sheet Pile Wall System 15
� H/Z Pile Wall System 16
� Trench shoring safety systems 25
King Posts / Bracing Beams 28
Waling Channels 30
Tie Rods & Anchor Bars 31
Equipment 33
� Add-on Vibrators 33
� Rental of Hydraulic Vibro-Hammers 34
Value Added Services 35
Mobile Rood System 26
Tubular Piles 17
Trench Sheets 19
Trench Shoring Systems 21
� Standard Trench Box – Type 600 23
Steelforce Middle East FZCO is a Belgian company located in Dubai. We are part of
the Steelforce Group; headquartered in Antwerp, Belgium.
About Us
� Sourcing of material from reputed
manufacturers globally
� Complete solutions for shoring works
� Alternative cost effective solutions� Stockholding of new and used material
� Project supply
� Flexible financing options� Rental of shoring material
� Buy back options
� Design and technical assistance
� After sales and on-site support
� Blasting and Coating
Steelforce services include:
� Sheet Piles
� Sheet Pile Corner Sections
� Combination Wall Systems
� Trench Sheet
� Tubular Piles
� Trench Boxes
� Double Slide Rail Systems
� King Posts
� Struts and Waling Beams / Channels / Pipes
� Tie Rods
� Piling Equipment
� Value Added Services
Our range of products consists of:
Steelforce is the largest independent Belgian steel
trader, with worldwide expertise and experience in
buying and selling steel.
Established in 1974, we have since developed excellent
relationships with steel mills, steel suppliers and shipping
lines all over the world. We have a very extensive
network of sales and purchase offices worldwide; with
offices in Shanghai, Hong Kong, Singapore, Ukraine,
Turkey, India and Brazil.
Our broad network of offices ensures that we can follow
up on your enquiries around the clock and give you the
right local services.
Since our launch in the United Arab Emirates we have
established very close partnerships with various
European, Asian and Middle Eastern steel mills.
We have our own warehouses and are active in
distribution of various special steel items
� Protection Steel,
� Abrasion Resistant Steel,
� Sheet Piles and Foundation Solutions,
� Coated Steel Products
� Boiler Quality Plates
For our customers we provide local services with
possibilities of financing, working on basis of just in time
deliveries, providing product knowledge and tailor made
solutions in all aspects of the steel business. We are the
right bridge between steel supplier and customer.
Steelforce connects steel, people and processes in a
client focused and controlled business environment. Our
experience, dedicated people and drive to become the
standard of excellence enable us to offer the best in steel
services.
Steelforce Foundation Solutions division provides
customers with a wide range of solutions to their piling
and shoring needs.
01
Sheet Piles
02
Japanese Sections
Section
Moment ofInertia
SectionModulus
Width
W
mm
Height
H
mm
Thickness
t
mm
Per Pile
kg/m
Wall
kg/m2 cm4 /m cm3 /m
Mass
SP II
SP III
SP IIIa
SP IV
SP VL
SP VIL
SP IIw
SP IIIw
SP IVw
400
400
400
400
500
500
600
600
600
100
125
150
170
200
225
130
180
210
10.5
13.0
13.1
15.5
24.3
27.6
10.3
13.4
18.0
48.0
60.0
58.4
76.1
105.0
120.0
61.8
81.6
106.0
120
150
146
190
210
240
103
136
177
8,740
16,800
22,800
38,600
63,000
86,000
13,000
32,400
56,700
874
1,340
1,520
2,270
3,150
3,820
1,000
1,800
2,700
Hot Rolled Sheet Piles
U - Piles U-Type sheet piles are the most commonly used sheet
piles in temporary shoring works. Their advantages are:
� Availability of various sizes, lengths, and grades from
stock for immediate supply,
� Ease of handling due to their small section,
� Ease of installation,
� Perfect for multiple uses due to their rigid geometrical
design,
� Excellent water tightness characteristics,
� Suitable for micro-tunneling shafts, excavation for
underground floors and car parks, trench shoring, and
general soil retention requirements.
h
t
w
03
European Sections
Section
Moment ofInertia
SectionModulus
Width
W
mm
Height
H
mm
Thickness
Per Pile
kg/m
Wall
kg/m2 cm4 /m cm3 /m
Mass
t
mm
s
mm
ZU601
ZU602
ZU603
ZU604
ZU605
ZU606
ZU16
ZU18
ZU18T
ZU22-1
ZU22
ZU22+1
ZU28A
ZU28
ZU28T
ZU607
ZU16
ZU20
ZU25
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
750
750
750
155
155
155
190
210
218
215
215
215
225
225
225
226
227
228
226
205
222
225
7.5
8.2
9.7
10.0
12.5
14.4
10.2
11.2
12.2
11.1
12.1
13.1
14.2
15.2
16.2
19.0
11.5
12.0
14.5
6.4
8.0
8.2
9.0
9.0
9.2
8.4
9.0
9.5
9.0
9.5
10.0
9.7
10.1
10.5
10.6
9.3
10.0
10.2
46.3
53.4
64.8
73.8
83.5
94.2
72.6
76.9
81.1
81.9
86.1
90.4
97.4
101.8
106.2
114.0
86.3
96.9
110.4
77.2
89.0
108.0
123.0
139.2
157.0
121.0
128.2
135.2
136.5
143.6
150.7
162.3
169.6
177.1
190.0
115.0
129.2
147.2
11,530
12,870
18,600
30,400
42,420
54,375
35,950
38,650
41,320
46,350
49,450
52,500
60,580
64,460
68,380
72,320
32,850
44,440
56,240
744
830
1,200
1,600
2,020
2,500
1,670
1,800
1,920
2,060
2,200
2,335
2,680
2,840
3,000
3,200
1,600
2,000
2,500
04
Section
Moment ofInertia
SectionModulus
Width
W
mm
Height
H
mm
Thickness
t
mm
Per Pile
kg/m
Wall
kg/m2 cm4 /m cm3 /m
Mass
SLU5-1
SLU6-3
SLU7-1
SLU8-4
SLU9-3
SLU10-1
SLU11-2
SLU11-3
SLU12-3
SLU13-4
SLU14-1
SLU15-3
SLU16-1
SLU17-1
SLU18-1
SLU18-6
SLU20-4
SLU20-8
SLU21-1
SLU22-1
SLU23-2
600
600
600
750
750
600
600
600
700
700
750
600
750
750
750
600
750
600
750
600
650
75
155
150
160
160
150
180
200
220
220
223
211
220
215
230
218
240
235
250
250
270
8.5
6.0
6.0
6.0
7.0
7.0
8.0
7.0
7.5
8.0
8.0
8.2
9.0
9.5
9.0
9.3
10.5
9.5
10.0
10.0
9.0
56.4
41.9
43.7
51.3
59.9
53.9
62.0
55.3
64.2
69.6
74.2
68.7
84.5
89.1
87.6
88.1
102.1
93.2
99.6
90.0
97.8
94.0
69.9
72.9
68.4
79.9
89.8
103.3
92.2
90.9
99.4
98.8
114.5
112.7
118.8
116.8
146.8
136.4
138.7
132.8
150.
135.0
3,800
10,005
10,508
13,025
14,507
19,078
19,980
23,716
26,978
28,765
31,802
32,633
35,660
37,094
41,641
41,781
49,525
47,676
63,069
55,161
62,640
508
647
700
813
906
1,031
1,110
1,185
1,225
1,307
1,429
1,546
1,620
1,724
1,810
1,921
2,063
2,028
2,122
2,205
2,320
SLU25-2
SLU25-4
SLU26-1
SLU27-1
SLU28-4
SLU28-5
SLU32-3
SLU32-8
SLU35-2
SLU37-1
SLU40-1
SLU43-1
SLU46-1
600
750
750
600
600
600
750
600
750
750
750
750
750
245
255
250
25
283
295
323
303
304
305
305
305
315
11.5
10.6
12.0
11.5
10.5
10.8
11.0
11.8
12.0
13.0
14.0
15.0
16.0
105.8
110.4
124.8
108.6
101.8
106.2
122.2
118.3
136.1
151.0
163.9
177.0
192.5
176.4
147.2
166.4
181.0
169.6
177.1
162.9
197.3
181.5
201.3
218.5
236.0
256.7
61,535
64,086
65,330
67,348
80,813
89,362
102,790
102,098
105,070
114,296
122,670
132,280
145,784
2,511
2,513
2,612
2,693
2,860
3,029
3,186
3,375
3,456
3,746
4,021
4,338
4,628
Other sizes are available on request
Cold Rolled Sheet Piles
05
06
Section
Moment ofInertia
SectionModulus
Width
W
mm
Height
H
mm
Thickness
Per Pile
kg/m
Wall
kg/m2 cm4 /m cm3 /m
Mass
t
mm
s
mm
ZZ12-770
ZZ13-770
ZZ14-770
ZZ12-700
ZZ13-700
ZZ14-700
ZZ17-700
ZZ18-700
ZZ19-700
ZZ20-700
ZZ24-700
ZZ26-700
ZZ27-700
ZZ28-700
ZZ36-700
ZZ38-700
ZZ40-700
ZZ42-700
ZZ44-700
ZZ46-700
ZZ48-700
ZZ50-700
ZZ52-700
ZZ48-580
770
770
770
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
580
343.5
344.0
344.5
315.2
315.2
316.2
420.0
420.5
421.0
421.5
459.2
460.2
460.7
461.2
499.2
500.2
501.2
499.2
500.2
501.2
503.2
504.2
505.2
482
8.6
9.1
9.6
8.6
9.6
10.6
8.5
9.1
9.6
10.1
11.3
12.3
12.8
13.3
15.1
16.1
17.1
18.1
19.1
20.1
22.1
23.1
24.1
19.2
8.5
9.0
9.5
8.5
9.5
10.5
8.4
9.0
9.5
10.0
11.2
12.2
12.7
13.2
11.2
12.2
13.2
14.0
15.0
16.0
15.0
16.0
17.0
15.1
72.8
76.2
79.6
67.9
74.2
80.5
73.3
76.7
80.2
83.7
95.8
103.0
106.4
110.1
118.7
126.5
134.3
143.0
150.7
158.5
159.3
166.7
174.3
139.9
94.5
99.0
103.4
97.0
105.9
114.9
104.7
109.6
114.6
119.5
136.9
147.1
152.0
157.3
169.6
180.7
191.8
204.2
215.3
226.5
227.6
238.3
249.0
241.1
21,496
22,433
23,370
18,971
20,611
22,262
36,425
38,001
38,578
41,155
55,949
59,843
61,641
63,740
89,753
94,984
100,219
105,543
110,942
116,159
120,467
125,358
130,403
115,712
1,252
1,304
1,357
1,208
1,308
1,408
1,735
1,807
1,880
1,953
2,437
2,601
2,676
2,764
3,596
3,798
3,999
4,228
4,436
4,635
4,788
4,973
5,162
4,801
Z - Piles Z-Type sheet piles are mainly used for permanent
shoring solutions, where high strength and large
quantities are required. Their advantages are:
� Can be supplied and installed in double piles,
allowing for faster installation,
� Availability of sections with high section modulus,
� Continuous webs as well as having the interlocks
on either side of the neutral axis allow for
optimized section modulus,
� Improved section modulus to mass ratio,
� Increased moment of inertia, lowering the
deflection.
Hot Rolled Sheet Piles
tw
ft
h
w w
07
08
Section
Moment ofInertia
SectionModulus
Width
W
mm
Height
H
mm
Thickness
t
mm
Per Pile
kg/m
Wall
kg/m2 cm4 /m cm3 /m
Mass
SLZ12-1
SLZ12-2
SLZ13-1
SLZ13-2
SLZ14-1
SLZ14-2
SLZ14-3
SLZ14-4
SLZ15-1
SLZ17-2
SLZ17-5
SLZ17-6
SLZ18-1
SLZ18-2
SLZ18-5
SLZ18-6
SLZ18-7
SLZ18-8
SLZ19-1
SLZ19-2
SLZ19-3
SLZ20-1
SLZ24-1
SLZ25-1
SLZ25-4
670
770
670
770
670
770
770
650
700
700
575
675
630
700
675
630
700
640
630
700
675
700
700
630
675
302
344
303
344
304
345
345
320
420
420
350
430
380
420
420
381
440
385
381
421
390
421
459
480
430
8.5
8.5
9.5
9.0
10.5
9.5
10.0
8.0
7.0
8.5
9.5
8.5
9.5
9.0
9.0
10.0
9.0
8.0
10.5
9.5
10.0
10.0
11.2
10.5
11.5
66.1
72.6
72.0
76.1
78.3
78.5
82.9
61.0
62.0
73.1
67.3
74.9
74.4
76.5
79.5
77.8
77.5
64.0
81.0
80.0
83.6
83.5
95.7
91.5
96.7
99.0
94.0
107.5
98.8
116.9
103.2
107.7
93.8
88.6
104.4
117.0
111.0
118.0
109.0
117.8
123.0
110.7
100.0
128.6
114.3
123.9
119.0
136.7
145.0
143.0
18,120
21,414
19,695
22,360
21,280
23,374
24,236
22,080
31,080
36,330
29,750
36,679
34,200
37,800
37,905
35,624
40,546
34,939
36,957
39,363
36,367
41,048
55,768
59,040
60,240
1,200
1,245
1,300
1,300
1,400
1,355
1,405
1,380
1,480
1,730
1,700
1,706
1,800
1,800
1,805
1,870
1,843
1,815
1,940
1,870
1,865
1,950
2,430
2,460
2,510
SLZ26-1
SLZ26-2
SLZ26-5
SLZ27-1
SLZ28-1
SLZ28-2
SLZ34-1
SLZ36-1
SLZ37-1
SLZ39-1
SLZ41-1
SLZ46-1
SLZ48-1
SLZ50-1
630
700
675
675
630
700
675
675
700
700
700
580
580
580
470
460
430
460
440
461
485
485
499
560
560
540
570
580
11.5
12.2
12.0
12.0
12.5
13.2
12.0
13.2
13.5
13.5
14.0
15.0
15.5
16.0
97.9
102.9
101.2
106.1
105.0
110.0
112.1
119.5
124.2
131.9
139.5
132.6
139.6
146.7
155.0
147.0
150.0
157.0
167.0
157.0
166.2
177.0
177.4
188.0
199.0
229.0
240.7
253.0
61,218
59,800
55,900
62,100
60,720
63,618
83,057
87,300
92,439
109,200
114,660
124,200
137,085
145,580
2,605
2,600
2,600
2,700
2,760
2,760
3,425
3,600
3,705
3,900
4,095
4,600
4,810
5,020
Cold Rolled Sheet Piles
09
Section
Moment ofInertia
SectionModulus
Width
W
mm
Height
H
mm
Thickness
t
mm
Per Pile
kg/m
Wall
kg/m2 cm4 /m cm3 /m
Mass
SLL2-1
SLL3-2
SLL4-1
SLL5-3
SLL6-2
SLL7-1
SLL8-1
SLL9-3
SLL10-3
SLL13-2
SLL15-2
SLL18-4
SLL20-3
SLL25-1
SLL30-1
SLL40-1
SLL46-1
700
700
600
750
750
921
750
700
900
1,540
900
1,600
1,600
1,600
1,500
1,160
1,160
146
147
250
250
251
252
252
312
313
350
350
449
450
476
510
550
551
4.0
5.0
3.5
4.0
5.0
6.0
6.0
5.5
7.0
9.0
9.0
8.5
9.5
10.2
11.2
13.5
15.0
30.8
38.6
28.7
37.4
47.7
65.9
57.8
54.6
77.2
142.2
104.3
154.2
172.0
199.4
197.5
227.0
259.8
44.0
55.2
47.8
49.9
63.6
71.6
77.0
78.0
85.7
92.3
115.9
96.3
107.5
124.6
141.0
195.7
223.9
1,945
2,427
5,883
6,582
8,441
9,941
10,138
14,634
16,317
22,949
26,683
41,530
46,336
60,208
74,056
111,652
126,788
266
330
470
526
672
789
804
939
1,042
1,312
1,525
1,850
2,059
2,532
2,902
4,064
4,600
Other sizes are available on request
Omega Piles � Have higher stiffness compared to U-type sheet
piles, as the interlocks are at the outermost part of
the sheet piles, as far away from the neutral axis as
possible,
� Suitable for locations where space is restricted, as
sheet piles are installed along the same line,
� Can be produced in wider sections than the U-type
sheet piles,
� Light weight and cost effective,
� Sizes available: from 4-16 mm thick, 600-1,600 mm
wide, and section modulus from 260-4,600 cm3/m,
� Can be produced as per customer’s own design.
t
w
H
10
Section
Moment ofInertia
SectionModulus
Width
W
mm
Height
H
mm
Thickness
t
mm
Per Pile
kg/m
Wall
kg/m2 cm4 /m cm3 /m
Mass
SP FL
SP FXL
500
500
44.5
47.0
9.5
12.7
61.7
77.2
123
154
396
570
89
121
Hot Rolled Straight Web Straight Web sheet piles are perfect for use in
situations where rock layers are close to ground
level, the excavation depth is of particular
importance, and where anchoring would be difficult
or even impossible.
� Extremely high tensile at their interlocking
sections, up to 5.88 MN per linear metre,
� Best suited for use in cellular-type structures,
such as quay walls, manmade island seawalls,
cofferdams, and other similar project,
� Deviation angle (interlock swing) up to 12.5°,
� Can be supplied in lengths up to 38.0 metres.
w
ht
11
Section
Moment ofInertia
SectionModulus
Width
W
mm
Height
H
mm
Thickness
t
mm
Per Pile
kg/m
Wall
kg/m2 cm4 /m cm3 /m
Mass
SLS 1
SLS 2
SLS 3
SLS 4
SLS 5
SLS 6
500
500
500
500
500
500
69.5
71
72.0
72.5
72.7
73.0
9.5
11.0
12.0
12.5
12.7
13.0
57.4
66.0
73.2
76.3
77.1
79.6
114.8
132.0
146.4
152.6
154.2
159.2
283
321
365
382
390
401
82
91
102
106
108
111
Cold Rolled Straight Web
W
t
H
12
Hot Rolled Corner Sections
Cold Rolled Corner Sections
Corner sections provide an easy and economical solution to form
corners and turns in sheet pile walls. Steelforce can supply corner
sections compatible with both U and Z type sheet piles (Larssen
Interlock), as well as hot rolled and cold rolled piles.
Corner Sections
SLZ9 SLU C14
E22E20 OMEGA
30
45
45
Mass = 15.38kg/m
50
50
90 - 135
Mass = 17.33kg/m
50
Kg/m = 21.9
60
13
Combination Wall Systems
14
Combination (Z Pile + Tubular Pile)
Width
W
mm
Moment ofInertia
cm4 /m
SectionModulus
cm3 /m
Wall
kg/m2
Mass
SLZ 18-1 + 914 mm Ø x 12 mm WT
SLZ 18-1 + 914 mm Ø x 14 mm WT
SLZ 18-1 + 1,016 mm Ø x 14 mm WT
SLZ 18-1 + 1,016 mm Ø x 16 mm WT
SLZ 18-1 + 1,219 mm Ø x 14 mm WT
SLZ 18-1 + 1,219 mm Ø x 16 mm WT
SLZ 18-1 + 1,321 mm Ø x 15 mm WT
SLZ 18-1 + 1,321 mm Ø x 16 mm WT
SLZ 18-1 + 1,422 mm Ø x 16 mm WT
SLZ 18-1 + 1,422 mm Ø x 18 mm WT
SLZ 18-1 + 1,524 mm Ø x 17 mm WT
SLZ 18-1 + 1,524 mm Ø x 18 mm WT
SLZ 18-1 + 1,600 mm Ø x 18 mm WT
SLZ 18-1 + 1,700 mm Ø x 18 mm WT
SLZ 18-1 + 1,800 mm Ø x 18 mm WT
SLZ 18-1 + 1,800 mm Ø x 20 mm WT
SLZ 18-1 + 1,900 mm Ø x 20 mm WT
SLZ 18-1 + 2,000 mm Ø x 21 mm WT
SLZ 18-1 + 2,540 mm Ø x 21 mm WT
SLZ 18-1 + 2,997 mm Ø x 21 mm WT
SLZ 18-1 + 2,997 mm Ø x 25 mm WT
2,254
2,254
2.356
2,356
2,559
2,559
2,661
2,661
2,762
2,762
2,864
2,864
2,940
3,040
3,140
3,140
3,240
3,340
3,880
4,337
4,337
194.5
213.9
219.6
240.2
229.5
252.5
245.0
257.9
292.9
287.7
280.4
293.3
287.1
302.0
306.5
334.2
339.1
358.2
380.4
394.9
462.0
172,586
172,586
253,102
285,059
392,805
444,395
509,368
541,048
647,975
724,014
812,922
858,187
966,717
1,120,772
1,287,735
1,424,563
1,624,203
1,926,808
3,408,634
5,021,932
5,952,695
3,776
4,310
4,982
5,611
6,445
7,291
7,712
8,191
9,114
10,183
10,668
11,262
12,084
13,186
14,308
15,828
17,097
19,268
26,840
33,513
39,724
Other combinations are also available. Please contact us for further details.
� High section modulus to relatively low mass ratio,
� Endless combinations allow for the most economical
solution to be adopted,
� U or Z type sheet piles can be used as infill, giving
freedom of choice for customer depending on
preference and cost,
� Steelforce can source and supply the complete
solution, including the interlocks welded to the
tubular piles ready for installation,
� Solutions available for both hot rolled and cold
formed sheet piles.
Tubular / Sheet Pile Wall System
Wall ThicknessOD
System Width
15
� Extensive combinations of H and Sheet Piles, providing
endless options for the engineers to choose from,
� H Piles are supplied with interlocks fitted onto them,
reducing cost, the number of connections, and time to fit
the connectors,
� Designs can be tailor made to suit the requirements on
site: thicker sections for better corrosion protection,
drivability on site, etc.,
� Can be supplied in both hot and cold rolled depending
on clients’ preference and requirement.
H/Z Pile Wall System
System Width
16
Steelforce has long standing relationships with multiple mills and sources,
providing high quality steel pipes at competitive prices. Steelforce can:
� Provide customized solutions to customers with full transparency from start to
finish.
� Source steel tubular piles from multiple reputable origins as per the clients’
requirements,
� Supply material of specific grades, quality, size and length as per project
specifications.
� Supply LSAW, SSAW, ERW, or seamless pipes,
� Provide a door to door service where material is delivered to the project site as
required.
� Engage a third party throughout the manufacturing process, allowing full
traceability and higher quality assurance.
� Provide value added services such as: addition of piling shoes, shear keys,
lifting eyes, blasting and coating, and other services as required by the client.
Tubular Piles
17
18
Section
Moment ofInertia
SectionModulus
Width
W
mm
Height
H
mm
Thickness
t
mm
Per Pile
kg/m
Wall
kg/m2 cm4 /m cm3 /m
Mass
SFT4003.5
SFT4004
SFT6006
SFT6008
SFT8008
SFT8808
400
400
600
600
800
800
40
37
78
80
80
80
3.5
4.0
6.0
8.0
8.0
8
13.64
15.60
38.00
50.90
63.48
68.8
34.10
39.00
63.33
84.80
79.53
78.18
85
98
711
942
883
855
55
60
180
237
233
297
� Light weight overlapping piling sheets provide an
inexpensive shoring solution,
� Ease of Installation: No need for piling equipment.
Can be installed by the cut and lower method using
an excavator,
� Perfect for low to medium depth excavations.
� Suitable for micro tunneling as well as trenching
works.
Trench Sheets
t
w
h
19
Section
Moment ofInertia
SectionModulus
Width
W
mm
Height
H
mm
Thickness
t
mm
Per Pile
kg/m
Wall
kg/m2 cm4 /m cm3 /m
Mass
KD400-6
KD750-8
400
742
50
94
6
8
22.2
53.6
55.5
72.2
250
1,200
100
254
KD Piles
W
Ht
20
Trench Shoring Systems
PLACE AND ADJUST METHOD LOWER AND CUT METHOD
max. 3,00 m
1 m
2 m
3 m
4 m
5 m
6 m
7 m
8 m
9 m
10 m
9 - 13 t
max. 3,80 m
Base element 12 - 18 t
with Top element
18 - 30 t
max. 6,00 m
9 - 13 t
max. 5,20 m
Base element 12 - 18 t
with Top element
18 - 30 t
Type 100Light Weight Shoring
Type 300Light Box Shoring
Type 400Pile Chamber
Type 600Standard Box
Shoring
21
max. 3,80 m
18 - 30 t
max. 3,80 m
18 - 30 t
max. 6,20 m
24 - 31 t
max. 7,60 m
Manhole BoxShoring
Single Slide Rail
ShoringDouble Slide Rail Shoring
Standard
Double Slide Rail Shoring
XL
up to 6,2 m 24 - 31 tat depths from 6,2 m
30 - 50 t
22
Plate Length
PL (m)
Ele
me
nt
Plate Height
PH (m)
Plate
Thickness
PT (mm)
PC-Length
PCL (m)
PC-Height
PCH (m)
Capacity
(kN/m2)
Weight per
box (kg)
1
2
2.40 / 2.60
1.40
1,950 / 2,075
1,1603.00 107 2.60 1.50 / 1.30 65.7 / 76.3
1
2
2.40 / 2.60
1.40
2,180 / 2,320
1,2903.50 107 3.10 1.50 / 1.30 56.3 / 65.4
1
2
2.40 / 2.60
1.40
2,400 / 2,560
1,5104.00 107 3.60 1.50 / 1.30 49.3 / 57.2
STANDARD TRENCH BOX – TYPE 600
� The fastest method of trench shoring, suitable for
all utility installation works,
� Can be used in all types of soil conditions,
� Installation by cut and lower method,
� Strong and durable, can last for many years to
come,
� Can be used for a maximum depth of 5.20 metres
� Trench width: 0.980 – 4.480 metres,
� Pipe Clearance Height: 1.50 metres,
� Available for sale and rental.
Trench Shoring Systems
PL
PT
TW
PH
WW
PCH
23
0
1
2
3
4
5
6
0.98 – 1.26
1.48 – 1.76
1.98 – 2.26
2.48 – 2.76
2.98 – 3.26
3.48 – 3.76
3.98 – 4.26
1.20 – 1.48
1.70 – 1.98
2.20 – 2.48
2.70 – 2.98
3.20 – 3.48
3.70 – 3.98
4.20 – 4.48
468
403
348
299
254
210
165
65
86
107
128
149
170
191
Nu
mb
er
Inte
rme
dia
te
Pip
e
Working
Width
WW (m)
Trench
Width
TW (m)
Safe
Working Load
(kN)
Weight
(kg)
Trench boxes of other sizes and specifications are available on request
provide image
Standard Spindle
24
25
Trench shoring safety systems
Safety guardrail
Aluminium Adjustable Clamping Guardrails provide sites with much needed physical barricades to prevent workers falling into open trenches and excavations.
� With adjustable clamping foot
� Available in lengths: 3,0 m, 3,5 m, 4,0 m
� Modular in design and construction
� Easy storage and stacking on site and whilst in transport.
Mesh Barriers 1000 mm
Mesh Barriers are an ideal product for construction sites requiring practical solutions to manage the risks of injury to personnel from dropped objects when working within open ground excavations.
� Mesh panels: 1m x 1m
� Low weight: 9 kg
� Robust in construction
� Fast assembly
Shoring Platform with safety swing gate
The Shoring Platform and Telescopic Walkway provide multiple users with a safe means of access and egress to and from the ground excavation and allowing users a safe 3-points of contact at all times.
� non slip grid mesh floor construction� self closing gate
� built-in ladder support bracket
26
Material: non-breakable PE
Dimensions: 200 cm x 100 cm x 2,5 cm
Weight: 40,5 kg / panel
Surface:
pressure load: approx. 130t / m2 (depending on subsoil)
Transport: 590 MRS - medium panels per truck
MRS - medium
Features
The MRS - medium panels are heavy-duty mats which can withtand even the highest loads (130 t) and can be laid manually. The newly designed profile with standardized ruts is suitable for driving over with a pallet truck or wheelbarrow.
� For use on smaller construction sites, up to the heavy load use of tracked vehicles and heavy construction machinery. It offers application possibilities for event, construction and communal infrastructure. Two people lay without additional aids up to 60 MRS - medium panels per hour.
Logistics
MRS - medium panels are the optimalsolution for almost any project. Dimensions and weight are adjusted so that the panels can be loaded onto any European truck. The cost savings already starts during the transport.
590 MRS medium panels correspond to an area of 1.180 m2 which can be transported on one truck.
Mobile Road System
Our Mobile Road System ground protection tiles are avalible in
two different categories. They are used to to protect the ground
by building temporary access roads or parking lots.
They serve to protect or secure the subsoil and, above all,
prevent it from getting stuck in mud or snow and guarantee the
safe movement of man and machine off-road.
Unsightly ruts, plaster abrasion and other damages of the
ground are avoided thereby. Furthermore, they offer a high
flexibility, e.g. for the hassle-free crossing of obstacles or curbs.
Material: high-density PE (UHMW)
Dimensions: 300 cm x 200 cm x 4,7 cm
Weight: 235 kg / panel
Surface:
pressure load:approx. 160 t / m2 (12 tons wheel load, depending on subsoil)
Transport: 90 MRS - heavy panels per truck
27
MRS - heavy
Features
The MRS - heavy soil protection plates are screwed together. The result is a fixed, both in length and width, driveway or working plat- form. The load-bearing capacity of the ground is optimized consi- derably. The panels are designed for particularly heavy loads and vehicles.
� Temporary access roads to the construction site
� Crane and assembly platforms (e.g. wind energy)
� In power line construction etc.
Logistics
MRS - heavy panels are easierto transport than most alternative road panels for temporary use. Therefore, multiple mats can be loaded on trucks or in containers, which reduces transportation costs.
90 MRS - heavy panels corres- pond to an area of 540 m2 which can be transported on one truck.
SizeSection Dimensions
H x B x tw x tf
mm
r
mm
UnitWeight
kg/m Ix Iy
Moment of
Inertia cm4
Radius of
Gyration cm
Standard Dimensions Section Properties
Section
Modulus cm3
Plastic Section
Modulus cm3
Rx Ry Sx Sy Zx Zy
100 x 100 x6 8
125 x 125 x 6.5 x 9
150 x 150 x 7 x 10
175 x 175 x 7.5 x 11
200 x 200 x 8 x 12
200 x 204 x 12 x 12
244 x 252 x 11 x 11
250 x 250 x 9 x 14
294 x 302x 12 x 12
300 x 300 x 10 x 15
304 x 305 x 11 x 17
16.9
23.6
31.1
40.4
49.9
56.2
63.8
71.8
83.4
93.0
105.0
378
839
1,620
2,900
4,720
4,980
8,700
10,700
16,600
20,200
23,200
134
293
563
984
1,600
1,700
2,940
3,650
5,510
6,750
7,730
4.18
5.29
6.40
7.50
8.62
8.35
10.3
10.8
12.5
13.1
13.2
2.49
3.13
3.77
4.37
5.02
4.88
6.01
6.32
7.20
7.55
7.61
76
134
216
331
472
498
713
860
1,130
1,350
1,520
27
47
75
112
160
167
233
292
365
450
514
86
152
243
371
526
566
797
953
1,260
1,480
1,690
41
72
114
171
243
257
353
443
558
682
779
8
8
8
13
13
13
13
13
13
13
13
100x100
125x125
150x150
175x175
200x200
250x250
300x300
King Posts / Bracing Beams
tw
t f
h
r
b
28
Section G
kg/m
h b tw t f r
mm Ix Iy
Moment of
Inertia cm4
Section Dimensions Section
Modulus cm3
Plastic Section
Modulus cm3
Sx Sy Zx Zy
23.0
30.0
37.0
46.1
52.0
60.0
71.0
73.0
88.9
96.9
117.9
6.8
9.4
11.5
11.0
12.5
14.2
17.3
14.2
17.3
15.4
18.7
7.6
7.6
7.6
10.2
10.2
10.2
10.2
12.7
12.7
15.2
15.2
152.2
152.9
154.4
203.6
204.3
205.8
206.4
254.6
256.3
305.3
307.4
152.4
157.6
161.8
203.2
206.2
209.6
215.8
254.1
260.3
307.9
314.5
5.8
6.5
8.0
7.2
7.9
9.4
10.0
8.6
10.3
9.9
12.0
1,250
1,748
2,210
4,568
5,259
6,125
7,618
11,410
14,270
22,250
27,670
399.9
560.5
706.2
1,548
1,778
2,065
2,537
3,908
4,857
7,308
9,059
164
221.8
273.2
449.6
510.1
584.4
706.0
897.9
1,096
1,445
1,760
52.55
73.31
91.48
152.1
174
200.6
245.9
307
379
478.7
589.4
182
247.7
308.8
497.4
567.4
656.1
798.8
992.1
1,224
1,592
1,958
80.16
111.6
139.6
230.9
264.2
305.3
373.7
465.4
575.3
726.1
895.4
UC152x152x23
UC152x152x30
UC152x152x37
UC203x203x46
UC203x203x52
UC203x203x60
UC203x203x71
UC254x254x73
UC254x254x89
UC305x305x97
UC305x305x118
Section G
kg/m cm2
b h s t r
mm Ix Iy
Moment of
Inertia cm4
Section Dimensions Area
A
Section
Modulus cm3
Plastic Section
Modulus cm3
Sx Sy Zx Zy
20.4
26.7
33.7
42.6
51.2
61.3
71.5
83.2
93.0
103.0
117.0
127.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
17.5
18.0
19.0
20.5
12
12
12
15
15
18
18
21
24
24
27
2
26.0
34.0
43.0
54.3
65.3
78.1
91.0
106.0
118.4
131.4
149.1
161.3
100
120
140
160
180
200
220
240
260
280
300
320
100
120
140
160
180
200
220
240
260
280
300
300
6.0
6.5
7.0
8.0
8.5
9.0
9.5
10.0
10.0
10.5
11.0
11.5
449.5
864.4
1,509
2,492
3,831
5,696
8,091
11,260
14,920
19,270
25,170
30,820
167.3
3147.5
549.7
889.2
1,363
2,003
2,843
3,923
5,135
6,595
8,563
9,239
89.91
144.1
215.6
311.5
425.7
569.6
735.5
938.3
1,148
1,376
1,678
1,926
33.45
52.92
78.52
111.2
151.4
200.3
258.5
326.9
395.0
471.0
570.9
615.9
104.2
165.2
245.4
354.0
481.4
642.5
827.0
1,053
1,283
1,534
1,869
2,149
51.42
80.97
119.8
170.0
231.0
304.8
393.9
498.4
602.2
717.6
870.1
939.1
HEB 100
HEB 120
HEB 140
HEB 160
HEB 180
HEB 200
HEB 220
HEB 240
HEB 260
HEB 280
HEB 300
HEB 320
29
DimensionsMoment of
Inertia cm4
Section
Modulus cm3
Plastic Section
Modulus cm3
h
mm
b
mm
tw
mm
tf
mm
r1
mm
r2
mmlx ly Sx Sy Zx Zy
A
mm2
x 102
Section
UPN 100
UPN 120
UPN 140
UPN 160
UPN 180
UPN 200
UPN 220
UPN 240
UPN 260
UPN 280
UPN 300
UPN 320
UPN 350
UPN 380
UPN 400
100
120
140
160
180
200
220
240
260
280
300
320
350
380
400
50
55
60
65
70
75
80
85
90
95
100
100
100
102
110
6.0
7.0
7.0
7.5
8.0
8.5
9.0
9.5
10.0
10.0
10.0
14.0
14.0
13.5
14.0
8.5
9.0
10.0
10.5
11.0
11.5
12.5
13.0
14.0
15.0
16.0
17.5
16.0
16.0
18.0
8.5
9.0
10.0
10.5
11.0
11.5
12.5
13.0
14.0
15.0
16.0
17.5
16.0
16.0
18.0
4.5
4.5
5.0
5.5
5.5
6.0
6.5
6.5
7.0
7.5
8.0
8.75
8.0
8.0
9.0
13.50
17.00
20.40
24.00
28.00
32.20
37.40
42.30
48.30
53.30
58.80
75.80
77.30
80.40
91.50
206
364
605
925
1,350
1,910
2,690
3,600
4,820
6,280
8,030
10,870
12,840
15,760
20,350
29.3
43.2
62.7
85.3
114
148
197
248
317
399
495
597
570
645
846
41.2
60.7
86.4
116
150
191
245
300
371
448
535
679
734
829
1,020
8.49
11.12
14.8
18.3
22.4
27.0
33.6
39.6
47.7
57.2
67.8
80.6
75.0
78.7
102
49.0
72.6
103
138
179
228
292
358
442
532
632
826
918
1,010
1,240
16.2
21.2
28.3
35.2
42.9
51.8
64.1
75.7
91.6
109
130
152
143
148
190
10.6
13.4
16.0
18.8
22.0
25.3
29.4
33.2
37.9
41.8
46.2
59.5
60.6
63.1
71.8
G
Kg/m
Waling Channels
B
tw
tf
r1 r
2
H
30
Steelforce can offer tie rods from 20 mm to 200 mm in diameter, with steel grade ranging between 355 and 1,100 MPa
Tie rods can also be supplied in the exact length required. Different accessories such as turn buckle, link plates,
bearing plates, and spherical nuts can be added to increase the length and improve the tie rods performance,
allowing for one dimensional articulation or full articulation based on design requirements. Corrosion protection can
be provided as per the customer’s specifications.
Tie Rods & Anchor Bars
SOLID STEEL BARS� Tie Rods are anchoring systems that are often used to
provide additional support as part of a marine shoring
structure, such as sheet pile walls,
� Steelforce can supply solid bar anchors with forged upset
ends, allowing threads to be increased in size with a
slight increase in weight. Increasing the thread diameter
minimizes the bending stresses to the threaded portion,
ensuring the shaft is the weakest part.
D
I.
31
* Also available in grade 500/550
mm
mm
kN
kN
mm2
kg/m
18
21
170
204
254
2.00
22
25
255
304
380
2.98
25
28
329
393
491
3.85
28
32
413
493
616
4.83
30
34
474
565
707
5.55
35
40
645
770
962
7.55
43
48
973
1,162
1,452
11.40
50
55
1,315
1,570
1,963
15.40
57.5
55
1,740
2,077
2,597
20.38
63.5
63
2,122
2,534
3,167
24.86
75
70
2,960
3,535
4,418
34.68
Size (diameter), D
Dmax
Yield Strength
Ultimate Strength
Area
Weight
Threaded Steel Bar – Grade* 670/800
Steelfocrce offers hot rolled high strength continuously
threaded steel bars produced with the highest level of
accuracy, ensuring a well-defined yield point, accurate
and reliable steel at high strengths.
� Steel bars are produced in an ISO 9001
certified mill,
� Can be supplied in grade 500 or 670,
� Diameter range from 12-75 mm,
� Can be cut / coupled to any required length,
� Bars can be supplied black, hot dip galvanised,
epoxy coated, denso-tape wrapped, or in heat shrink
sleeves for any corrosion protection requirement,
� Stock availability at all times,
� A variety of accessories are available.
Threaded Steel Bars
32
All our add-on vibros are supplied with:
� Universal sheet pile clamp
� Mounting adapter to excavator boom
� Hydraulic hose set
� Storage plate
� Complete set of manuals in English
Technical Data HVR 45 HVR 60 HVR 85 HVR 100
kN
Nm
rpm
bar
l/min
kW
kN
kg
kg
kg
mm
mm
mm
300
45
2460
320
130
70
40
740
1100
800
1595
1050
615
400
60
2460
320
196
100
40
920
1260
1000
1635
1170
615
500
85
2300
320
245
130
80
1480
2055
1500
1865
1445
750
500
100
2135
320
312
170
80
1495
2080
1600
1865
1445
750
Centrifugal force
Static moment
Frequency max.
Oil pressure max.
Oil flow max.
Hydraulic power
Static pulling force
Dynamic weight
Total weight
Weight of piles
Overall height
Width
Depth
ADD-ON VIBRATORS Hydraulic add-on vibrators are mounted on the arm of a hydraulic
excavator instead of the bucket and are connected to the hydraulic
system for driving and extracting trench sheets, sheet piles, H-piles or
steel pipes up to a length of 7m (depending on the arm configuration).
� Very compact design and low point of gravity,
� Excellent performance due to large static moment and push-down
with the excavator,
� Very little impact to nearby structures due to high-frequency (city
vibrators),
� Simple handling of piles with lifting chain,
� Very economical as no separate power pack is required,
� The piling length can be extended up to 8m or 10m with excavators
having a long boom and stick, or when using a gooseneck.
Equipment
TB
S
X
Z
H
33
34
The variable moment hammers can be adapted to varying soil conditions, making
them very versatile. Due to their high frequency, variable eccentric moment and
amplitude, they can adapt to every driving and extracting situation with minimal
vibration.
0-24
0-1,400
2,300
400
350
493
3,500
5,500
6,020
kgm
kN
rpm
kN
Bar
l/min
kg
kg
kg
Eccentric Moment
Max. Centrifugal Force
Max. Frequency
Max. Static Line-Pull
Max. Operating Pressure
Max. Oil Flow
Forced Lubrication
Dynamic Weight excluding DWK 200T
Dynamic Weight including DWK 200T
Total Weight excluding DWK 200T & hoses
2,000
500
30
615
kg
kg
M
kg
Clamps:
Sheet Pile Clamp
Transport Weight per Piece
Double Clamps
Transport Weight per Piece
Power Pack:
Model
Hose Set:
Length
Transport Weight (+/-)
Vibro-Hammer Specifications PVE 24VM
YES
PPK 80T
DWK200T
Variable Moment Vibro-Hammers have many advantages, such as:
� Resonance-Free starting and stopping,
� Suitable for urban areas and vibration sensitive projects,
� Safe working close to existing buildings, under structures, railways, and
vulnerable utilities and historic buildings, .
Rental of Hydraulic Vibro-Hammers
� Can be cut / coupled to any required length,
� Forced lubrication system,
� Cooling system,
� Silent power packs
Steelforce carries a fleet of hydraulic vibro hammers available for rent.
Current fleet consists of Crane Mounted Hammers with Variable Moment,
predominantly the PVE 24VM.
10x150
1660 305435
2445
=360=
450
385385
1967 460
500
35
� Alternative Solutions / Proposals: We deal with
multiple sources that can provide solutions that are
high quality, more economical, and with shorter
delivery periods.
� Design support: Our in-house design team can
provide preliminary shoring design support to guide
our customers towards suitable solutions.
� On-site support: We provide advice for the most
suitable solution(s) based on the site conditions and
restrictions. We also provide on-site training on how
to use our equipment and products safely and
correctly.
� Fabrication: We can provide tailored sheet pile
lengths and other shoring products by cutting and
welding to suit the site requirement.
� Rental and Buy-back: We offer our sheet piles,
trench boxes on both sale with buy-back option and
on rental basis.
� Equipment Rental: we carry a fleet of Hydraulic
Vibro Hammers avalible for rent
� Corrosion protection: We can offer sheet piles,
tubular piles and other foundation products with
corrosion protection as per the project specifications.
Blasting and coating works can be done at the
production source, or by one of our reputed local
suppliers.
We provide a one-stop shop for our foundation solutions customers, offering full
solutions as per the project requirements. Steelforce also offers services that go
beyond just the supply of material, to take care of the extra requirements of the
customer.
OUR VALUE ADDED SERVICES INCLUDE, BUT NOT LIMITED TO:
Value Added Services
provide image
36
P : +971 4 806 7000