NEW! SERENITY SERIES SLIDING DOOR SYSTEMOur New Serenity Series Sliding Door System has an entirely...
2
C.R. LAURENCE CO. | crlaurence.com | usalum.com PHONE: (800) 421-6144 Ext. 7740 FAX: (800) 458-7496 EMAIL: [email protected] SERENITY SERIES SLIDING DOOR SYSTEM • Unique System With Rollers Above the Header Support Bar • System Features One Sliding Door and One Fixed Panel • Use of Minimal Hardware Gives Door an Almost Floating Appearance • Specially Designed Roller Bearings Allow Easy Opening and Closing of Door • Accessory Kit Available for 90 Degree Return Panels • For 5/16" or 3/8" (8 or 10 mm) Thick Tempered Glass • Choice of Durable Polished or Brushed Stainless Steel Finishes Our New Serenity Series Sliding Door System has an entirely different look from traditional sliding shower door systems. The use of minimal hardware provides a frameless look that gives the enclosure an almost floating appearance. Specially designed roller bearings allow for quiet, easy opening and closing of the door. This unique roller system operates above the header support bar that spans the top of the enclosure. One sliding and one fixed panel make the 180 Degree Standard Kit beautiful and practical. The Kit includes all items pictured to the right, with the exception of the 90 Degree Accessory Kit. The durable polished or brushed stainless steel units will work with 5/16" or 3/8" (8 or 10 mm) thick tempered glass (not included). SPECIFICATIONS: Glass Thickness Range: 5/16" or 3/8" (8 or 10 mm) Tempered Safety Glass (Not Included) Material: Stainless Steel Maximum Door Size: Do Not Exceed Either 30" (762 mm) Wide or 88 Pounds (40 kg) Fabrication: Holes Required in Both Door and Fixed Panel (see crlaurence.com) BRUSHED STAINLESS CAT. NO. POLISHED STAINLESS CAT. NO. DESCRIPTION SERF2BS SER90BS SERH2BS SERR2BS SERS2BS SERAL2BS SERW2BS SERFP2BS SERDG2BS SERP2BS SERF2PS SER90PS SERH2PS SERR2PS SERS2PS SERAL2PS SERW2PS SERFP2PS SERDG2PS SERP2PS Standard 180º Kit 90º Accessory Kit 78-3/4" (2 m) Header Support Bar Only Rollers (2 / Pack) Stoppers (2 / Pack) Anti-Lift Fittings (2 / Pack) Track Holder Fittings For Wall (2 / Pack) Track Holder Fittings For Fixed Panel (2 / Pack) Door Guide Thru-Glass Pull STANDARD 180 DEGREE KIT INCLUDES: One 78-3/4" (2 m) Length Header Support Bar Two Rollers Two Stoppers Two Anti-Lift Fittings Two Track Holder Fittings for Wall Two Track Holder Fittings for Fixed Panel One Thru-Glass Pull One Door Guide Track Holder Fitting for Fixed Panel (2 per pack) 78-3/4" (2 m) Header Support Bar. Low Profile 1-1/8" (28.6 mm) Height Stoppers (2 per pack) Door Guide Anti-Lift Fittings (2 per pack) Thru-Glass Pull Rollers (2 per pack) Track Holder Fitting for Wall (2 per pack) ACCESSORY KIT FOR 90 DEGREE RETURN Sold Separately AVDB4071-8/11 Track Holder Fitting for Wall (2 per pack) Already Included in Standard 180º Kit NEW!
Transcript of NEW! SERENITY SERIES SLIDING DOOR SYSTEMOur New Serenity Series Sliding Door System has an entirely...
C.R. LAURENCE CO. | crlaurence.com | usalum.com
PHONE: (800) 421-6144 Ext. 7740 FAX: (800) 458-7496 EMAIL: [email protected]
SERENITY SERIES SLIDING DOOR SYSTEM• Unique System With Rollers Above the Header Support Bar
• System Features One Sliding Door and One Fixed Panel
• Use of Minimal Hardware Gives Door an Almost Floating Appearance
• Specially Designed Roller Bearings Allow Easy Openingand Closing of Door
• Accessory Kit Available for 90 Degree Return Panels
• For 5/16" or 3/8" (8 or 10 mm) Thick Tempered Glass
• Choice of Durable Polished or Brushed Stainless Steel FinishesOur New Serenity Series Sliding Door System has an entirely different look from traditional sliding
shower door systems. The use of minimal hardware provides a frameless look that gives the enclosurean almost floating appearance. Specially designed roller bearings allow for quiet, easy openingand closing of the door. This unique roller system operates above the header support bar that spansthe top of the enclosure.
One sliding and one fixed panel make the 180 Degree Standard Kit beautiful and practical. TheKit includes all items pictured to the right, with the exception of the 90 Degree Accessory Kit. Thedurable polished or brushed stainless steel units will work with 5/16" or 3/8" (8 or 10 mm)thick tempered glass (not included).
SPECIFICATIONS:Glass Thickness Range: 5/16" or 3/8" (8 or 10 mm)Tempered Safety Glass (Not Included)
Material: Stainless SteelMaximum Door Size: Do Not Exceed Either 30" (762 mm) Wide or 88 Pounds (40 kg)
Fabrication: Holes Required in Both Door andFixed Panel (see crlaurence.com)
BRUSHEDSTAINLESSCAT. NO.
POLISHEDSTAINLESSCAT. NO. DESCRIPTION
SERF2BSSER90BSSERH2BSSERR2BSSERS2BSSERAL2BSSERW2BSSERFP2BSSERDG2BSSERP2BS
SERF2PSSER90PSSERH2PSSERR2PSSERS2PSSERAL2PSSERW2PSSERFP2PSSERDG2PSSERP2PS
Standard 180º Kit90º Accessory Kit
78-3/4" (2 m) Header Support Bar OnlyRollers (2 / Pack)
Stoppers (2 / Pack)Anti-Lift Fittings (2 / Pack)
Track Holder Fittings For Wall (2 / Pack)Track Holder Fittings For Fixed Panel (2 / Pack)
Door GuideThru-Glass Pull
STANDARD 180 DEGREE KIT INCLUDES:One 78-3/4" (2 m) Length Header Support BarTwo RollersTwo StoppersTwo Anti-Lift FittingsTwo Track Holder Fittings for WallTwo Track Holder Fittings for Fixed PanelOne Thru-Glass PullOne Door Guide
Track Holder Fittingfor Fixed Panel(2 per pack)
78-3/4" (2 m) Header Support Bar. Low Profile 1-1/8" (28.6 mm) Height
Stoppers(2 per pack)
Door Guide
Anti-Lift Fittings(2 per pack)
Thru-Glass Pull
Rollers(2 per pack)
Track Holder Fittingfor Wall
(2 per pack)ACCESSORY KITFOR 90 DEGREERETURNSold Separately
AV
DB
40
71
-8/1
1
Track HolderFitting for Wall(2 per pack)Already Includedin Standard180º Kit
NEW!
AVDB4071-Serenity_Layout 1 5/13/13 11:25 AM Page 1
C.R. LAURENCE CO. | crlaurence.com | usalum.com
PHONE: (800) 421-6144 Ext. 7740 FAX: (800) 458-7496 EMAIL: [email protected]
COTTAGE SERIES SLIDING DOOR SYSTEM
• Stock Kits in Four Finishes, with a Choice of Metal or Clear Jambs
• Custom Inline and Angled Kits Made to Your Specifications
• Extrusions and Hardware Also Availableas Separate Components
Cottage Series Frameless Sliding Shower Door Kits are easy toinstall with smooth gliding bolt-through top hangers, no waiting formessy adhesives to dry. Individual supplemental extrusions andhardware components are available to convert a standard kit intoan angled enclosure or wider inline unit for a customized look.
AVAILABLE IN FOUR STANDARD FINISHES
Brite Anodized
Brite Gold Anodized
BrushedNickel
Oil Rubbed Bronze
CK Series with Clear Side JambsNo vertical metal for the popular "all-glass look".Smooth gliding top hung hidden rollers makes for easy cleaning.
Frameless Sliding BypassShower Door Kits
HEADER HEADER FILLER TOP HANGER (1/4" GLASS)
TOP HANGER (3/8" GLASS)SIDELITE SILL SIDE JAMB
BOTTOM SILLDK Series with Metal Side JambsUtilizes metal side jambs for a more traditional appearance.Bolt-through top hangers allow for immediate installation.
BY C.R. LAURENCE MANUFACTURED IN THE USA
An ISO9001:2008 Certified Company
AVDB4071-Serenity_Layout 1 5/13/13 11:26 AM Page 2
