New Price List 2014. Quality is always a good decision. · 2014. 1. 17. · anchored in quality...

anchored in quality

Price List 2014.Quality is always a good decision.

Valid from February 2014

SHEAR REINFORCEMENT SYSTEMS

SHEAR CONNECTOR SYSTEMS

FAÇADE CONNECTION SYSTEMSCONNECTION SYSTEMS MOUNTING TECHNOLOGY

2 © JORDAHL | Price List 2014 | 12/2013 | www.jordahl.de




JORDAHL has over 100 years of unique experience in the market. And this experience forms the basis for our competence and high standards. Whether high-quality products, service or consulting – we aim to do everything for our customers to the same demanding standard of excellence. That is what the JORDAHL seal stands for. It is a guarantee of quality for our customers and also the standard that we strive to adhere to each and every day.

Quality since 1907.

MORE THAN100 YEARS OF QUALITY

JORDAHLSINCE 1907

The JORDAHL Seal

The JORDAHL Cover PictureDuring the restoration of a building at the Technical University of Munich, it was determined that a new façade solution was required for structural, energy and economic reasons. The decision was made to use a futuristic, waved façade that could easily be at-tached to the existing building structure, dating back to 1959, with special JORDAHL® brickwork support brackets. Standard and special versions of JVA+F, JVA+FAR and JVA+NFT type brackets were used, as their flexibility guarantees that any structural toler-ances are compensated without any difficulties.Specific statistical calculations had to be completed by the JORDAHL experts for the special large brackets. A total of 1200 JORDAHL® brickwork support brackets have been used in this project to securely support the façade.

The JORDAHL® brickwork support brackets have been used by the Technical University of Munich to create its structural, energetically and economi-cally perfect high-tech look.

The sign of excellent JORDAHL® quality.

JORDAHL connects: concrete, steel, heavy loads and a whole lot more. And of course numerous customers around the world who have already decided for high-quality and individual products from fastening, reinforce-ment and shear connection, mounting technology and façade connection systems. Customers who choose JORDAHL want more – higher quality, broader choice, better technical advice, wider experience. And they get all

JORDAHL – The Companyof this from us. Since our company was founded in Berlin in 1907 we have been at the forefront of connection and shear reinforcement systems development.JORDAHL products, such as anchor channels, have be-come milestones in the evolution of structural engineer-ing and have brought lasting changes to construction, shaping the way buildings are designed and making them safer, and not just in Germany.

JORDAHL‘s registered offi ce and administrative headquarters in the premises of its affi liate PUK.

© JORDAHL | Price List 2014 | 12/2013 | www.jordahl.de 3

Connection SystemsJORDAHL® Anchor Channels Anchor Channels JTA 4 – 7Toothed Anchor Channels JXA 8Toothed Anchor Channels JXA-PC 9Toothed Anchor Channels JZA 10Loop Channels JSA 10Channel Pricing 11Profi led Metal Sheet Channels JTB 12Railing Fastening JGB 13Brackets JK 14Edge Protection Angle JKW 14Curved Channels JTA / JXA/JM/JXM 15

JORDAHL® T-bolts & Accessories T-bolts 16 – 23Accessories 24 – 28Locking Plates JGM, JAM, Notch Toothed Bolt JKZS 24 Toothed Straps JVB 26End Anchor Type JE 27Clamping Plates KP-A, KP, SKU 27Accessories 28Frame Shoes JG 29Brick Ties 30 – 31

Shear Reinforcement SystemsPunching Shear Reinforcement JDA 32 – 33Shear Reinforcement JDA-S 32 – 33Standard Spacer Elements 33

Shear Connector SystemsJORDAHL® Shear Connectors Double Shear ConnectorsJDSD, JDSDQ 34 – 35Fire Protection Collar JBRM, JBRMQ 34 – 35

Façade Connection SystemsJORDAHL® Brickwork Support Systems Brickwork Support Brackets JVA+ and JVAeco+ 36 – 39Angled Bracket JW 36Suspension Loop JRH 38Stainless Steel Wire ESD 38Prefabricated Part Holder JFT 39Threaded Loops JGS 39Angled Support Brackets L-DF+, L-DN+ and L-F+ 40Grout-in Brackets JMK+ 41Accessories 39 – 43Attic Brick Anchors JAV 41Scaff old Anchor JGA 42Cavity Wall Ties JLA 43

Mounting TechnologyJORDAHL® Mounting Channels Mounting Channels JM W 44Toothed Mounting Channels JXM W 44Framing Channels JM K 45 – 46Toothed Mounting Channels JZM K 46Slotted Back Channels JML K 47Toothed Slotted Back Channels JZML K 47

Service 48

Additional Ordering Information 48

Advice 49

Terms of Delivery and Payment 50

Index 51

Contents

All rights reserved.Photos: cover picture and page 2 below: Andreas Achmann, page 2 top: Source PUKWe reserve the right to make revisions within the framework of product and application related development.Subject to printing errors or mistakes.

JORDAHL GmbHNobelstr. 5112057 Berlin, Germanywww.jordahl.de





Anchor Channels JTAETA (European Technical Approval ETA-09/0338)ABZ (General Technical Approval Z-21.4-151)

Profi le JTA W 72/48 JTA K 72/48 JTA W 55/42

Associated T-bolts JA M 20 – M 30 JA M 20 – M 30 JB M 10 – M 24, JE M 241)

Round Anchor

I-Anchor

48

195

72

33

5

15.5

48

72

33

6

10

195190

55

26

5

12.9

42

Channel Length[mm]

Number ofAnchors

€/PieceNumber of

Anchors

€/PieceNumber of

Anchors

€/PieceMaterial Material Material

hdg A4 hdg A4 hdg150 2 29.25 119.35 2 27.80 74.70 2 21.60200 2 32.40 143.00 2 30.75 89.55 2 24.75250 2 35.80 166.60 2 34.00 104.60 2 27.45300 2 39.35 190.55 2 37.60 119.60 2 30.55350 2 50.70 224.45 2 48.05 137.55 2 38.75400 3 54.15 247.85 3 51.45 158.50 3 41.70550 3 67.40 318.40 3 61.55 204.95 3 50.45800 4 94.25 447.55 4 88.45 285.40 4 70.25

1050 5 120.95 575.80 5 115.25 373.90 5 90.253000 11 343.40 1518.05 11 327.00 1122.10 11 260.056000 21 653.60 2891.05 21 622.80 2136.95 21 495.60

Price per Metre/lin. m 3.5/m 108.95 481.85 3.5/m 103.80 356.15 3.5/m 82.60Weight [kg/m] 9.80 9.05 7.70

Standard FixedLength Surcharge [10 %] [10 %] [10 %] [10 %] [10 %]

■ All prices incl. foamfi lling and nailholes ■ Stock length = 6,000 mm (-0/+50 mm) ■ Anchor distance 25–35 mm ■ Fixed length: 1,050 mm < L < 6,000 mm ■ Calculation example for standard and special fi xed length: see page 11Special fi xed length: 20 % special fi xed length surcharge (increased production costs).

Anchor Type: ■ Round anchor = standard version ■ I-anchor = delivery subject to confi rmation except for W 72/48 and W 53/34; I-anchor standard version

■ Weight per metre for mill fi nish version, average anchor weight (for galvanised profi les: weight per metre + 10 %; for stainless steel profi les: weight per metre + 2 %)

1) JE M 24 is equivalent to JB M 24.

CONNECTION SYSTEMS


New version now available with extended ETA 09/0338, guaranteeing endurance strength under oscillating loads, fire resistance duration R120 and a higher point load bearing capacity.

Material and Design ■ hdg = hot-dip galvanised 1.0038/1.0044 ■ A4 = stainless steel 1.4401/1.4404/1.4571 ■ W = hot rolled ■ K = cold formed

Ordering Example Anchor Channels Short Piece

Type Profi leSize

ChannelLength

Anchor Material ETA Compliant

JTA W 50/30 – 250 – 2A – hdg – CE

Profi le JTA W 53/34 JTA K 53/34 JTA W 50/30

Associated T-bolts JB M 10 – M 20 JB M 10 – M 20 JB M 10 – M 20

Round Anchor

I-Anchor

34

53

22

4

10.5

165

34

53

22

4.5

8

165

100

30

50

22

2.75

7.9

Channel Length[mm]

Number ofAnchors

€/PieceNumber of

Anchors

€/PieceNumber of

Anchors


hdg A4 hdg A4 hdg A4150 2 18.60 59.40 2 17.60 48.70 2 12.95 41.95200 2 21.00 72.40 2 20.00 59.65 2 14.50 51.90250 2 23.55 85.20 2 22.30 69.40 2 16.25 62.15300 2 25.85 97.90 2 24.75 80.95 2 17.90 71.90350 3 32.65 117.10 3 31.05 98.15 3 22.30 86.25400 3 35.20 130.10 3 33.40 109.40 3 23.90 95.90550 3 43.55 168.00 3 38.95 140.95 3 28.50 125.20800 4 60.80 238.35 4 56.50 195.80 4 39.80 179.00

1050 5 78.10 309.10 5 74.10 260.25 5 50.60 232.903000 13 218.10 905.10 13 175.40 609.05 13 132.10 663.306000 25 415.95 1723.80 25 334.45 1159.80 25 251.35 1263.40

Price per Metre/lin. m 4/m 69.30 287.30 4/m 55.75 193.30 4/m 41.90 210.55Weight [kg/m] 5.60 5.10 3.45

Standard FixedLength Surcharge [10 %] [10 %] [10 %] [10 %] [10 %] [10 %]

NEW!





Anchor Channels JTAETA (European Technical Approval ETA-09/0338)ABZ (General Technical Approval Z-21.4-151)

1 ) Hot-dip galvanised version also available with shortened anchors (installation height of JTA W 40/22 and JTA K 40/25 is approx. 60 mm, that of JTA K 38/17 is approx. 55 mm; not part of the European Technical Approval and General Technical Approval). Prices on request.

■ All prices incl. foamfi lling and nailholes ■ Stock length = 6,000 mm (-0/+50 mm) ■ Anchor distance 25–35 mm ■ Fixed length: 1,050 mm < L < 6,000 mm ■ Calculation example for standard and special fi xed length: see page 11.

■ Special fi xed length: 20 % special fi xed length surcharge (increased production costs).

Anchor Type: ■ Round anchor = standard version ■ I-anchor = delivery subject to confi rmation ■ Weight per metre for mill fi nish version, average anchor weight(for galvanised profi les: weight per metre + 10 %; for stainless steel profi les: weight per metre + 2 %)

Profi le JTA K 50/30 JTA W 40/22 1) JTA K 40/25 1)

Associated T-bolts JB M 10 – M 20 JC M 10 – M 16 JC M 10 – M 16

Round Anchor

I-Anchor

30

50

3.0

7.422

100

2218

640

2.4

90

25

5.540

18

2.75

90

Channel Length[mm]

Number of Anchors

€/PieceNumber of

Anchors

€/PieceNumber of

Anchors


hdg A4 hdg A4 hdg A4150 2 11.20 30.50 2 9.75 30.20 2 9.15 25.75200 2 12.30 35.55 2 10.75 35.85 2 9.85 29.10250 2 13.35 41.20 2 11.85 42.00 2 10.60 34.15250 3 16.20 46.15 3 14.75 45.85 3 13.80 37.25300 2 14.25 47.45 2 12.90 48.85 2 11.20 39.00300 3 17.40 51.95 3 15.65 52.35 3 14.60 41.75350 3 18.65 57.75 3 16.60 58.90 3 15.45 46.25400 3 19.90 63.55 3 17.55 65.45 3 16.30 50.75550 3 22.85 82.60 3 20.60 84.50 3 18.20 65.10800 4 32.10 117.10 4 28.45 117.10 4 24.75 91.70

1050 5 38.90 151.80 5 36.20 155.65 5 31.60 118.253000 13 108.85 427.95 13 96.50 446.20 13 82.60 323.606000 25 207.20 815.40 25 183.85 849.95 25 156.50 616.00

Price per Metre/lin. m 4/m 34.55 135.90 4/m 30.65 141.65 4/m 26.10 102.65Weight [kg/m] 3.25 2.30 2.25

Standard FixedLength Surcharge [10 %] [10 %] [10 %] [10 %] [10 %] [10 %]

CONNECTION SYSTEMS


Profi le JTA K 38/17 1) 2) JTA K 28/15 2)

Associated T-bolts JH M 10 – M 16 JD M 6 – M 12

Round Anchor

I-Anchor

1718

3

38

80

12

28

15

2.3 50

Channel Length[mm]

Number of Anchors

€/PieceNumber of

Anchors

€/PieceMaterial Material

hdg A4 hdg A4100 2 6.80 19.75 2 5.65 16.30150 2 7.50 23.30 2 6.20 18.35200 2 8.20 25.75 2 6.75 19.75250 2 9.15 28.70 2 7.30 21.90300 3 13.70 36.10 3 11.30 27.25350 3 14.50 39.30 3 12.10 29.40400 3 15.30 42.70 3 12.80 31.60550 4 19.65 59.20 4 16.75 42.30800 5 26.40 82.60 5 21.35 57.95

1050 6 32.35 105.10 6 25.70 73.753000 16 70.25 284.10 16 52.70 189.756000 31 133.75 541.30 31 100.15 361.20

Price per Metre/lin. m 5/m 22.30 90.20 4/m 16.70 60.20Weight [kg/m] 2.05 1.20

Standard FixedLength Surcharge [10 %] [10 %] [10 %] [10 %]

1) Hot-dip galvanised version also available with shortened anchors (installation height of JTA W 40/22 and JTA K 40/25 is approx. 60 mm, that of JTA K 38/17 is approx. 55 mm; not part of the European Technical Approval and General Technical Approval). Prices on request.

2) Stainless steel A2 profi le, A4 anchor (not part of the European Technical Approval and General Technical Approval). Prices on request.


Ordering Example Anchor Channels Short Piece

Type Profi leSize

ChannelLength

Anchor Material ETA Compliant

JTA W 38/17 – 300 – 3A – hdg – CE





Toothed Anchor Channels JXAABZ (General Technical Approval Nr. Z-21.4-1690)

Profi le JXA W 64/44 JXA W 53/34 JXA W 38/23 JXA W 29/20

Associated T-bolts JXE M 20 – M 24 JXB M 16 – M 20 JXH M 12 – M 16, JH M 10 – M 16

JXD M 12,JD M 6 – M 12

Round Anchor

I-Anchor

190

44

10

64

26

5

7.5 22

53

4

34

165

2318

5.538

3

100

2014

529

2.580

Channel Length[mm]

Number of

Anchors

€/Piece Number of

Anchors

€/Piece Number of

Anchors

€/Piece Number of

Anchors

€/PieceMaterial Material Material Material

hdg A4 hdg A4 hdg A4 hdg150 2 51.75

Priceson

request

2 28.25 115.30 2 12.55 40.55 2 9.45200 2 59.50 2 31.30 138.20 2 14.05 50.15 2 10.35250 2 67.35 2 34.60 160.95 2 15.65 60.05 2 11.45300 2 75.15 2 38.00 184.10 2 17.25 69.50 3 12.50350 3 97.65 3 49.00 216.90 3 21.50 83.30 3 16.00400 3 105.40 3 52.30 239.45 3 23.05 92.65 3 16.95550 3 128.85 3 65.10 307.65 3 27.55 120.95 4 19.90800 4 181.50 4 83.05 432.45 4 38.45 172.90 5 27.50

1050 5 234.05 5 116.85 556.30 5 48.90 225.05 6 34.953000 13 688.35 13 331.80 1466.75 13 127.65 640.85 16 93.256000 25 1358.25 25 631.55 2793.35 25 242.95 1220.75 31 177.65

Price per Metre/lin. m 4/m 226.40 a. A. 4/m 105.25 465.55 4/m 40.50 203.45 5/m 29.60Weight kg/m 8.30 5.50 2.70 1.70

Standard FixedLength Surcharge [10 %] [10 %] [10 %] [10 %] [10 %] [10 %] [10 %]

■ All prices incl. foamfi lling and nailholes ■ Stock length = 6,000 mm (-0/+50 mm) ■ Anchor distance 25–35 mm ■ Fixed length: 1,050 mm < L < 6,000 mm ■ Calculation example for standard and special fi xed length: see page 11.

■ Special fi xed length: 20 % special fi xed length surcharge (increased production costs).

Anchor Type: ■ Round anchor = standard version ■ I-anchor = delivery subject to confi rmation ■ Weight per metre for mill fi nish version, average anchor weight (for galvanised profi les: weight per metre + 10 %; for stainless steel profi les: weight per metre + 2 %)

CONNECTION SYSTEMS


Profi le JXA - PC W 64/44 JXA - PC W 53/34 JXA - PC W 38/23 JXA - PC W 29/20

Associated T-bolts JXE M 20 – M 24 JXB M 16 – M 20 JXH M 12 – M 16, JH M 10 – M 16

JXD M 12, JD M 6 – M 12

Round Anchor

10

5

200

64

2644

180

7.553

4

2234

170

5.538

2318

3

5

165

29

14

2.5

20

Channel Length[mm]

Number of

Anchors

€/Piece Number of

Anchors

€/Piece Number of

Anchors

€/Piece Number of

Anchors

€/PieceMaterial Material Material Material

hdg A4 hdg A4 hdg A4 hdg150 2 95.60

Priceson

request

2 82.85

Priceson

request

2 68.90

Priceson

request

2 61.90200 2 105.20 2 89.20 2 71.90 2 64.30250 2 113.45 2 91.65 2 74.25 2 66.65300 2 121.80 2 96.80 2 78.85 3 75.75350 3 145.35 3 118.15 3 103.90 3 81.35400 3 158.30 3 127.20 3 106.80 3 96.10550 3 188.90 3 147.55 3 115.55 4 111.05800 4 238.15 4 184.40 4 141.90 5 138.00

1050 5 274.65 5 211.30 5 178.85 6 170.003000 13 807.85 13 495.55 13 375.35 16 345.856000 25 1593.75 25 892.55 25 654.85 31 621.60

Price per Metre/lin. m 4/m 265.65 a. A. 4/m 148.75 a. A. 4/m 109.15 a. A. 5/m 103.60Weight kg/m 8.76 5.74 3.51 2.46

Standard FixedLength Surcharge [10 %] [10 %] [10 %] [10 %] [10 %] [10 %] [10 %]

Ordering Example for Toothed Anchor Channels JXA - PC

Type Profi leSize

Channel Length Material

JXA - PC W 38/23 – 6,000 – hdg

Ordering Example for Toothed Anchor Channels JXA

Type Profi leSize


JXA W 38/23 – 6,000 – hdg

Toothed Anchor Channels JXA - PC






Toothed Anchor Channels JZAABZ ( General Technical Approval Nr.

Z-21.4-741)

Profi le JSA K 38/17 JSA K 28/15

Associated T-bolts JH M 10 – M 16 JD M 6 – M 12

Strap Type 2 × 20 × 400 1.5 × 15 × 320

3

18

38

17

2.3

28

12 15

€/Piece €/Piece

Material Materialhdg hdg

Incl.strap

Withoutstrap

Incl.strap

Withoutstrap

€/Metre 18.10 13.80 11.85 10.35Weight kg/m 2.30 1.35

Fixed Length Surcharge [10 %] [10 %]

1) Hot-dip galvanised version also available with shortened anchors (installation height of JTA W 40/22 and JTA K 40/25 is approx. 60 mm,that of JTA K 38/17 is approx. 55 mm; not part of the European Technical Approval and General Technical Approval). Prices on request.

Profi le JZA K 41/22 1)

Associated T-bolts JZS M 10 – M 16

Round Anchor

I-Anchor

2222

7.541

2.5

90

Channel Length[mm]

Number of

Anchors

€/PieceMaterial

hdg A4100 2 9.20 26.55150 2 10.75 31.00200 2 11.70 35.65250 2 12.55 40.10300 2 13.75 44.40350 3 17.00 55.55400 3 18.10 60.10550 3 21.50 72.90800 4 30.55 100.75

1050 5 37.45 130.953000 13 98.20 356.056000 25 187.60 679.75

Price per Metre/lin. m 4/m 31.25 113.30Weight kg /m 2.30

Fixed Length Surcharge [10 %] [10 %]

CONNECTION SYSTEMS

Loop Channels JSA


Ordering Example Toothed Anchor Channels JZA

Type Profi leSize


JZA K 41/22 – 6,000 – hdg


Channel Pricing ■ Prices quoted in this list are gross prices.

Calculating Prices Material: mill fi nish/galvanised

+

–

Gross priceSurcharge for increased

cost of steelDiscount

Final net price

Material: Stainless Steel A2 or A4

+

+–

Gross priceSurcharge for increased

cost of steelAlloy surcharge

Discount

= Final net price

Lengths less than 1,050 mm are short lengths.Lengths more than 1,050 mm are fi xed lengths.

Pricing for fi xed lengths(on the basis of price per metre)

× ×

×–

Price per metre [€/m]Length

Cost and alloy surchargesFixed

length surcharge [%]Discount

= Final net price

Standard Fixed Lengths ■ The standard fi xed-length surcharge is 10 %.

Anchor Channels with max. Anchor Spacing 200 mm: JTA K 38/17, JTA K 28/15, JXA W 29/20, JXA-PC W 29/20

Standard fi xed lengths [mm]12501450165018502050

22502450265028503050

32503450365038504050

42504450465048505050

5250545056505850

Anchor Channels with max. Anchor Spacing 250 mm: JTA W 53/34, JTA W 50/30, JTA W 40/22,JTA K 53/34, JTA K 50/30, JTA K 40/25, JXA W 64/44, JXA W 53/34, JXA W 38/23,JXA-PC W 64/44, JXA-PC W 53/34, JXA-PC W 38/23, JZA K 41/22

Standard fi xed lengths [mm] 130015501800 2050

2300 25502800 3050

3300355038004050

4300 4550 4800 5050

530055505800

Anchor Channels with max. Anchor Spacing 300 mm: JTA W 72/48, JTA W 55/42,JTA K 72/48

Standard fi xed lengths [mm] 1250155018502150

2450275030503350

3650395042504550

4850515054505750

Special Fixed LengthsAll other fi xed lengths are special fi xed lengths.The calculation here is based on a fi xed lengthsurcharge of 20 % (increased production costs).

Mounting and Framing ChannelsThe fi xed length surcharge shown in the price list applies to mounting and framing channels. Here there are no standard lengths.





Profi led Metal Sheet Channels JTB

■ All prices incl. foamfi lling ■ Stock length = 3,000 mm (-0/+50 mm) ■ Weight per metre for mill fi nish (for galvanised profi les: weight per metre +10 %)

Anchor Arrangement ■ Standard anchor spacing e = 450 mmwill be delivered if not requested otherwise

Ordering Example Profiled Metal Sheet Channels

Type Profi leSize

Anchor Distance

AnchorType Material

JTB – 60/24/3.0 – 450 – uni – hdg

e

JTB-uni

e

Anchor Distancee [mm]

Anchorper 3 m

Weight[kg/m]

€/mMaterial

hdg A4JTB 60/24/3.0-uni ( Material Strength 3 mm)

450 8 2.38 19.10 76.40

150 20 2.51 26.70 99.90

JTB 60/22/6.0-uni ( Material Strength 6 mm)450 8 3.97 30.75 On

request150 20 4.10 38.80

End Anchor JTB-EB

Incl. 4 drill screwswith � 4.8 × 16 mm

€/SetMaterial

hdg6.50

JTB-AR

e

Anchor Distancee [mm]

Anchorper 3 m

Weight[kg/m]

€/mMaterial

hdg A4JTB 60/24/3.0-AR (Material Strength 3 mm)

450 8 2.40 19.10 76.40

150 20 2.54 26.70 99.90

JTB 60/22/6.0-AR (Material Strength 6 mm)450 8 3.99 30.75 On

request150 20 4.13 38.80

End Anchor JTB-EA

Incl. 2 drill screwswith � 4.8 × 16 mm

€/SetMaterial

hdg6.50

Material and Design ■ hdg = hot-dip galvanised 1.0038/1.0044 ■ A4 = stainless steel 1.4401/1.4404/1.4571

ABZ (General Technical Approval Nr. Z-21.4-1 61)

CONNECTION SYSTEMS


Railing Fastening JGBStraight Short Piece (General Technical Approval Z.-21.4-1913)

Type Profi le1) Anchor Diameter MaterialProfi le Length Price €

100 120 150 200 220 250JGB ... G

JGB K 38/17 G-...� 10 hdg 20.55 20.85 21.05 21.80 21.95 22.50

Installation height H = 165 mm A4 39.70 40.75 42.85 45.85 46.85 48.85

JGB K 40/25 G-... � 12Installation height H = 200 mm

hdg 21.95 22.40 22.70 23.55 23.80 24.20A4 41.50 42.55 45.45 48.75 49.70 52.00


hdg 24.80 25.15 25.85 27.00 27.50 28.05A4 46.55 47.75 51.25 56.25 57.85 59.80


hdg 29.70 30.60 31.65 33.55 34.20 35.25A4 51.25 54.30 58.65 65.50 68.40 72.50

JGB ... DAJGB K 38/17 DA-...

� 10 hdg 22.60 22.90 23.15 23.85 24.00 24.60Installation height H = 120 mm A4 – – – – – –

JGB K 40/25 DA-... � 10Installation height H = 125 mm

hdg 23.00 23.55 23.85 24.75 25.00 25.40A4 43.60 44.65 46.15 48.90 50.10 51.25


hdg 25.75 26.20 26.90 28.10 28.55 29.20A4 48.05 49.30 51.65 57.90 61.40 61.55


hdg 30.60 31.50 32.60 34.60 35.25 36.35A4 52.80 55.90 60.40 67.45 70.40 74.70

JGB ... WJGB K 38/17 W-...

� 10 hdg 24.20 24.30 24.90 25.55 26.00 26.20Installation height H = 120 mm A4 46.65 48.05 49.30 51.95 52.65 54.00

JGB K 40/25 W-... � 12Installation height H = 155 mm

hdg 26.00 26.20 26.60 27.30 27.70 28.05A4 49.30 50.40 52.25 54.95 55.80 57.25


hdg 28.40 28.60 29.45 30.60 31.00 31.65A4 53.55 55.05 57.25 60.75 62.50 64.80


hdg 33.30 34.10 35.15 36.75 37.60 38.60A4 55.80 58.70 62.80 70.05 72.50 77.05

Type GProfi le

Profi le Dimensions l = 170 x 170 mm

AnchorDia meter Material Price €

JGB K 38/17 G-170 x 170 � 10hdg 40.70A4 83.70

JGB K 40/25 G-170 x 170 � 12hdg 43.15A4 91.00

JGB K 50/30 G-170 x 170 � 12hdg 46.30A4 97.10

JGB K 53/34 G-170 x 170 � 14hdg 51.30A4 119.15

Corner Piece with Reinforcing Bars (without Approval)

Material and Design ■ Hot-dip galvanised version (hdg) > 50 μm (for indoor use)Profi le Steel 1.0038 and anchor B500B

■ Stainless Steel (A4)profi l 1.4401/1.4404/1.4571 and anchor B500B or. B500B NR with K 38/17

■ Filling PE foam

Ordering Example Railing Fastening JGB

Type Profi leSize

Type Length Material

JGB K 38/17 G – 200 – A4

All prices including foam fi llingand 2 anchors

1) Hot rolled profi les on request

Type DAProfi le

Profi le Dimensions l = 170 x 170 mm

AnchorDia meter Material Price €

JGB K 38/17 DA-170 x 170 � 12hdg Price on r.A4 –

JGB K 40/25 DA-170 x 170 � 14hdg Price on r.A4 Price on r.



Corner Piece with Forged Head (without Approval)





Profi le-Brackets JKBracket Type JK 28/28-1 JK 36/36-1 JK 36/36-2

L

h h

L

Profi le K 28/28 K 36/36 K 36/36Associated T-bolts Type JD, M 6 – M 12 Type JH, M 10 – M 16 Type JH, M 10 – M 16

Extension Profi le for T-bolt

U 36/24M 12

U 45/27M 12

U 45/27M 12

Bracket Length L [mm] 100 200 300 400 300 400 500 600 300 400 500 600 700Height h [mm] 120 120 120 120 180 180 180 180 208 238 269 300 330

Material€/Piece

hdg 25.00 25.75 26.65 27.30 34.05 36.15 39.85 44.00 47.65 52.20 57.15 61.35 66.50A4 Prices on request Prices on request Prices on request

Ordering Example Profile-Brackets JK

Type Profi le Bracket Length L Material

JK – K 28/28-1 – 100 – hdg

Edge Protection Angle JKW

eI

s

92°

a

aR

L

250 n 500 250

Type a/s Length[mm]

Number of

Anchors

€/PieceMaterial

hdg A4/A2JKW – 50/5 – 500 2 31.50

Prices on

request

JKW – 50/5 – 750 2 37.80JKW – 50/5 – 1000 2 50.35JKW – 50/5 – 1500 3 61.85JKW – 50/5 – 2000 4 79.45JKW – 80/6 – 500 2 41.25JKW – 80/6 – 750 2 54.00JKW – 80/6 – 1000 2 71.60JKW – 80/6 – 1500 3 93.45JKW – 80/6 – 2000 4 120.10JKW – 100/6 – 500 2 47.55JKW – 100/6 – 750 2 62.30JKW – 100/6 – 1000 2 76.70JKW – 100/6 – 1500 3 112.50JKW – 100/6 – 2000 4 148.15JKW – 100/8 – 500 2 55.50JKW – 100/8 – 750 2 75.85JKW – 100/8 – 1000 2 102.70JKW – 100/8 – 1500 3 137.00JKW – 100/8 – 2000 4 177.90

Ordering Example Edge Protection Angle JKW

Type Length Material

JKW – 50/5 – 2,000 – hdg

Material and Design ■ hdg = hot-dip galvanised 1.0038 ■ A4 = stainless steel material 1.4401/1.4404/1.4571 ■ A2 = stainless steel material 1.4301

CONNECTION SYSTEMS


Curved Channels

Material and Design ■ hdg = hot-dip galvanised 1.0038 ■ A4 = stainless steel material 1.4401/1.4404/1.4571 ■ A2 = stainless steel material 1.4301

max./min. L [m]

Ri

Ra

max./m . L [m]

Profi le JTA / JM Material Price

W 72/48 hdg, A4

Priceson

request

K 72/48 hdg, A4

W 55/42 hdg

W 53/34 hdg, A4

K 53/34 hdg, A4

W 50/30 hdg, A4

K 50/30 hdg, A4

W 40/22 hdg, A4

K 40/25 hdg, A4

K 38/17 hdg, A4, A2

K 28/15 hdg, A4, A2

Profi le JXA/JXM

W 38/23 hdg, A4

W 29/20 hdg

Ri = internal profi le slot; Ra = external profi le slot

Ordering Example Curved Anchor Channels

Type Profi le Stretched Length L [m] Material Bending

Radius [m] JTA – K 38/17 – 1.05 – hdg Ri = 1.00

Anchor Channels JTA / JXAMounting Channels JM / JXM




FAÇADE CONNECTION SYSTEMSCONNECTION SYSTEMS MOUNTING TECHNOLOGYCONNECTION SYSTEMS

T-bolts & AccessoriesDetermining the Required T-bolt Length

JA

l

58.0

For profi les: W 72/48, K 72/48

Thread × Length l[mm]

Pack Qty [Piece]

Price €/100 Piece

Hot-dip galvanised (hdg), Grade 4.6JA M 20 × 50 hdg 4.6 50 744.85JA M 20 × 75 hdg 4.6 50 810.80JA M 20 × 100 hdg 4.6 25 832.05JA M 20 × 150 hdg 4.6 25 1076.05JA M 20 × 200 hdg 4.6 25 1229.25JA M 24 × 50 hdg 4.6 25 713.15JA M 24 × 75 hdg 4.6 25 783.05JA M 24 × 100 hdg 4.6 25 879.60JA M 24 × 150 hdg 4.6 25 1092.10JA M 24 × 200 hdg 4.6 10 1316.35JA M 27 × 75 hdg 4.6 10 1019.30JA M 27 × 100 hdg 4.6 10 1101.70JA M 30 × 75 hdg 4.6 25 1137.00JA M 30 × 100 hdg 4.6 10 1372.35JA M 30 × 150 hdg 4.6 25 1716.20JA M 30 × 200 hdg 4.6 5 2077.40

Hot-dip galvanised (hdg), Grade 8.8JA M 20 × 60 hdg 8.8 50 945.75JA M 20 × 75 hdg 8.8 50 1129.65JA M 20 × 100 hdg 8.8 25 1227.55JA M 20 × 125 hdg 8.8 25 1389.95JA M 24 × 75 hdg 8.8 25 1304.90JA M 24 × 100 hdg 8.8 25 1418.65JA M 24 × 150 hdg 8.8 20 1692.30JA M 24 × 200 hdg 8.8 10 2047.00

Stainless Steel, Quality A4-50; A4-70JA M 24 × 50 A4-50 20 4899.30JA M 24 × 100 A4-50 15 6573.65JA M 24 × 150 A4-70 15 10681.00

JB

41.6

l

For profi les: W 55/42, W 53/34, K 53/34, K 50/40, W 50/30, K 50/30, K 48/26


Pack Qty[Piece]

Price€/100 Piece

Zinc-plated (zp), Grade 4.6JB M 10 × 30 zp 4.6 100 270.35JB M 10 × 40 zp 4.6 100 271.60JB M 10 × 50 zp 4.6 100 275.30JB M 10 × 60 zp 4.6 100 285.05JB M 10 × 80 zp 4.6 100 333.90JB M 10 × 100 zp 4.6 100 351.75JB M 12 × 30 zp 4.6 100 229.15JB M 12 × 40 zp 4.6 100 239.25JB M 12 × 50 zp 4.6 100 248.65JB M 12 × 60 zp 4.6 50 256.90JB M 12 × 65 zp 4.6 50 260.10JB M 12 × 80 zp 4.6 50 291.80JB M 12 × 100 zp 4.6 50 357.55JB M 12 × 125 zp 4.6 50 534.15JB M 12 × 150 zp 4.6 25 631.55JB M 12 × 200 zp 4.6 25 858.10JB M 16 × 30 zp 4.6 50 277.70JB M 16 × 40 zp 4.6 50 285.25JB M 16 × 50 zp 4.6 50 300.10JB M 16 × 60 zp 4.6 50 308.25JB M 16 × 80 zp 4.6 50 351.40JB M 16 × 100 zp 4.6 50 414.85JB M 16 × 125 zp 4.6 25 533.15JB M 16 × 150 zp 4.6 25 601.60JB M 16 × 200 zp 4.6 50 729.75JB M 16 × 300 zp 4.6 25 1027.45JB M 20 × 35 zp 4.61) 25 352.50JB M 20 × 45 zp 4.61) 25 356.15

l = T-bolt lengthlk = clamping length (thickness

of the attached part)f = profi le nose and thickness

respectively (please see profi le pages)

m = nut height to EN ISO 4032s = washer thickness to

EN ISO 7093-1u = bolt projection to

EN ISO 4753

T-bolt Total m + s + u

[mm]

M 6 8.8M 8 11.3

M 10 13.9M 12 17.3M 16 21.8M 20 27.0M 24 32.5M 27 35.8M 30 38.6

f

lk l

m+s+u

req. l [ mm ] = l k + f + (m + s + u)

ExampleJORDAHL® anchor channel JTA K 53/34, f = 8 mm, available clamping lengthlk = 65 mm, T-bolt JB M16 zprequired l = 65 + 8 + 21.8 = 94.8 mmselected: JB M 16 × 100 zp

1) Not for profi le K 48/26


JBThread × Length l

[mm]Pack Qty[Piece]

Price€/100 Piece

Zinc-plated (zp), Grade 4.6JB M 20 × 55 zp 4.61) 25 380.00JB M 20 × 65 zp 4.61) 25 392.45JB M 20 × 75 zp 4.61) 25 415.10JB M 20 × 100 zp 4.61) 50 480.85JB M 20 × 125 zp 4.61) 25 636.50JB M 20 × 150 zp 4.61) 25 741.00JB M 20 × 200 zp 4.61) 25 952.70JB M 20 × 300 zp 4.61) 25 1255.45JB M 24 × 60 zp 4.61) 3) 25 875.45JB M 24 × 75 zp 4.61) 3) 25 993.05

Hot-dip galvanised (hdg), Grade 4.6JB M 10 × 100 hdg 4.6 100 351.75JB M 12 × 30 hdg 4.6 100 229.15JB M 12 × 50 hdg 4.6 100 248.65JB M 12 × 60 hdg 4.6 50 256.90JB M 12 × 80 hdg 4.6 50 291.80JB M 12 × 100 hdg 4.6 50 357.55JB M 12 × 125 hdg 4.6 50 534.15JB M 16 × 50 hdg 4.6 50 300.10JB M 16 × 60 hdg 4.6 50 308.25JB M 16 × 65 hdg 4.6 50 312.65JB M 16 × 80 hdg 4.6 50 351.40JB M 16 × 100 hdg 4.6 25 414.85JB M 20 × 45 hdg 4.61) 25 366.20JB M 20 × 55 hdg 4.61) 25 380.00JB M 20 × 65 hdg 4.61) 25 392.45JB M 20 × 75 hdg 4.61) 25 415.10JB M 20 × 100 hdg 4.61) 25 480.85JB M 20 × 125 hdg 4.61) 25 636.50JB M 20 × 150 hdg 4.61) 25 741.00

Hot-dip galvanised (hdg), Grade 8.8JB M 12 × 40 hdg 8.8 100 344.80JB M 12 × 50 hdg 8.8 100 404.60JB M 12 × 60 hdg 8.8 50 458.30JB M 12 × 80 hdg 8.8 50 487.50JB M 12 × 100 hdg 8.8 50 560.60JB M 16 × 50 hdg 8.8 50 495.60JB M 16 × 60 hdg 8.8 50 565.15JB M 16 × 80 hdg 8.8 50 610.25JB M 16 × 100 hdg 8.8 50 723.15JB M 16 × 125 hdg 8.8 50 910.05JB M 20 × 55 hdg 8.81) 25 620.50JB M 20 × 60 hdg 8.81) 25 631.35JB M 20 × 65 hdg 8.81) 25 639.90JB M 20 × 75 hdg 8.81) 25 688.90JB M 20 × 100 hdg 8.81) 25 750.10JB M 20 × 125 hdg 8.81) 25 962.85JB M 24 × 75 hdg 8.81) 3) 25 1198.55JB M 24 × 100 hdg 8.81) 3) 25 1337.00

■ All prices incl. nuts; washers to be ordered separately

Thread × Length l [mm]

Pack Qty[Piece]

Price€/100 Piece

Stainless Steel, Quality A4-50JB M 10 × 30 A4-50 50 1502.20JB M 12 × 30 A4-50 50 1689.80JB M 12 × 40 A4-50 50 1705.50JB M 12 × 50 A4-50 50 1848.55JB M 12 × 60 A4-50 50 1995.60JB M 12 × 100 A4-50 50 2784.70JB M 12 × 125 A4-50 25 3348.75JB M 16 × 30 A4-50 50 2703.40JB M 16 × 40 A4-50 50 2987.35JB M 16 × 50 A4-50 25 3183.45JB M 16 × 60 A4-50 25 3234.50JB M 16 × 80 A4-50 25 4020.10JB M 16 × 125 A4-50 25 4572.80JB M 16 × 150 A4-50 25 4798.45JB M 16 × 200 A4-50 25 5667.90JB M 20 × 45 A4-50 25 3234.50JB M 20 × 55 A4-50 25 3476.60JB M 20 × 65 A4-50 25 3724.15JB M 20 × 75 A4-50 25 3965.20JB M 20 × 100 A4-50 25 4026.85JB M 20 × 125 A4-50 25 4899.30JB M 20 × 150 A4-50 25 5598.85

Stainless Steel, Quality FA-70 (1.4462) 2)

JB M 12 × 40 FA-70 50 2054.90JB M 12 × 50 FA-70 50 2225.90JB M 12 × 100 FA-70 25 3347.20JB M 16 × 50 FA-70 25 3834.40JB M 16 × 80 FA-70 25 4342.50JB M 20 × 55 FA-70 25 4126.05JB M 20 × 100 FA-70 25 4779.25JB M 20 × 150 FA-70 25 6641.65

JE

For profi les: W 55/42


Pack Qty[Piece]

Price€/100 Piece

Zinc-plated (zp), Grade 4.6JE M 24 × 60 zp 4.6 25 875.45JE M 24 × 75 zp 4.6 25 993.05

Hot-dip galvanised (hdg), Grade 8.8JE M 24 x 75 hdg 8.8 25 1.198.55JE M 24 x 100 hdg 8.8 25 1.337.00

1) Not for profi le K 48/262) Description of FA also applies to F4 (1.4462)3) JB M 24 corresponds to JE M 24 but for profi le W 55/42

Ordering Example T-bolts

Type Thread Length mm Material

JB – M16 x 80 – zp 4.6





JCThread × Length l

[mm]Pack Qty[Piece]

Price€/100 Piece

Hot-dip galvanised (hdg), Grade 8.8JC M 12 × 40 hdg 8.8 100 234.35JC M 12 × 50 hdg 8.8 100 242.95JC M 12 × 60 hdg 8.8 100 254.15JC M 12 × 80 hdg 8.8 50 310.25JC M 12 × 100 hdg 8.8 50 341.95JC M 16 × 40 hdg 8.8 50 347.40JC M 16 × 60 hdg 8.8 50 376.75JC M 16 × 80 hdg 8.8 50 462.10JC M 16 × 100 hdg 8.8 25 509.05JC M 16 × 125 hdg 8.8 25 652.15

Stainless Steel, Quality A4-50JC M 10 × 30 A4-50 50 2166.50JC M 10 × 40 A4-50 100 2213.20JC M 10 × 50 A4-50 50 2302.50JC M 12 × 30 A4-50 100 1461.25JC M 12 × 40 A4-50 50 1616.25JC M 12 × 50 A4-50 50 1761.65JC M 12 × 60 A4-50 50 1850.35JC M 12 × 80 A4-50 50 2040.40JC M 12 × 100 A4-50 50 2247.90JC M 12 × 150 A4-50 25 3172.50JC M 16 × 30 A4-50 50 1655.10JC M 16 × 40 A4-50 50 1773.30JC M 16 × 50 A4-50 50 1920.45JC M 16 × 60 A4-50 25 2003.90JC M 16 × 80 A4-50 25 2172.55JC M 16 × 100 A4-50 25 2746.20JC M 16 × 150 A4-50 25 3600.65JC M 16 × 200 A4-50 25 4424.35


JC M 12 × 40 FA-70 50 1951.50JC M 12 × 50 FA-70 50 2114.00JC M 16 × 40 FA-70 50 2096.90JC M 16 × 50 FA-70 50 2304.55

JC 32.7

l

For profi les:W 40/22, K 40/25, K 40/22


Pack Qty[Piece]

Price€/100 Piece

Zinc-plated (zp), Grade 4.6JC M 10 × 20 zp 4.6 100 127.05JC M 10 × 30 zp 4.6 100 128.30JC M 10 × 40 zp 4.6 100 135.65JC M 10 × 50 zp 4.6 100 138.30JC M 10 × 60 zp 4.6 100 152.00JC M 10 × 65 zp 4.6 100 153.75JC M 10 × 80 zp 4.6 100 249.05JC M 10 × 100 zp 4.6 100 255.25JC M 12 × 20 zp 4.6 100 158.15JC M 12 × 30 zp 4.6 100 160.35JC M 12 × 40 zp 4.6 100 162.45JC M 12 × 50 zp 4.6 100 170.60JC M 12 × 60 zp 4.6 50 178.90JC M 12 × 80 zp 4.6 50 219.95JC M 12 × 100 zp 4.6 50 257.90JC M 12 × 125 zp 4.6 50 353.80JC M 12 × 150 zp 4.6 25 546.80JC M 12 × 200 zp 4.6 25 575.50JC M 16 × 30 zp 4.6 50 211.75JC M 16 × 40 zp 4.6 50 229.15JC M 16 × 50 zp 4.6 50 246.60JC M 16 × 60 zp 4.6 50 250.35JC M 16 × 80 zp 4.6 100 293.90JC M 16 × 100 zp 4.6 25 322.95JC M 16 × 125 zp 4.6 25 494.45JC M 16 × 150 zp 4.6 25 555.45JC M 16 × 200 zp 4.6 25 689.85JC M 16 × 250 zp 4.6 25 773.25JC M 16 × 300 zp 4.6 25 927.75

Zinc-plated (zp), Grade 8.8JC M 12 × 30 zp 8.8 100 225.05JC M 12 × 100 zp 8.8 50 341.95

Hot-dip galvanised (hdg), Grade 4.6JC M 10 × 30 hdg 4.6 100 128.30JC M 10 × 40 hdg 4.6 100 135.65JC M 10 × 60 hdg 4.6 100 152.00JC M 10 × 80 hdg 4.6 100 249.05JC M 12 × 40 hdg 4.6 100 162.45JC M 12 × 50 hdg 4.6 100 170.60JC M 12 × 60 hdg 4.6 100 178.90JC M 12 × 80 hdg 4.6 50 219.95JC M 12 × 100 hdg 4.6 50 257.90JC M 16 × 40 hdg 4.6 50 229.15JC M 16 × 50 hdg 4.6 100 246.60JC M 16 × 60 hdg 4.6 50 250.35JC M 16 × 80 hdg 4.6 50 293.90JC M 16 × 100 hdg 4.6 25 322.95

T-bolts

1) Description of FA also applies to F4 (1.4462)


JH30.5

l

For profi les:K 38/17, K 36/36, K 36/20, W 38/23 2)


Pack Qty[Piece]

Price€/100 Piece

Zinc-plated (zp), Grade 4.6JH M 10 × 20 zp 4.6 100 117.10JH M 10 × 30 zp 4.6 100 118.25JH M 10 × 40 zp 4.6 100 125.70JH M 10 × 50 zp 4.6 100 130.80JH M 10 × 60 zp 4.6 100 134.60JH M 10 × 80 zp 4.6 50 180.70JH M 10 × 100 zp 4.6 50 228.15JH M 10 × 150 zp 4.6 50 404.90JH M 12 × 20 zp 4.6 100 124.60JH M 12 × 25 zp 4.6 100 127.65JH M 12 × 30 zp 4.6 100 131.55JH M 12 × 40 zp 4.6 100 135.65JH M 12 × 50 zp 4.6 100 140.70JH M 12 × 60 zp 4.6 50 152.00JH M 12 × 80 zp 4.6 50 164.40JH M 12 × 100 zp 4.6 25 265.25JH M 12 × 125 zp 4.6 25 339.15JH M 12 × 150 zp 4.6 25 410.95JH M 12 × 200 zp 4.6 25 678.20JH M 12 × 300 zp 4.6 25 911.40JH M 16 × 30 zp 4.6 50 183.05JH M 16 × 40 zp 4.6 50 185.65JH M 16 × 50 zp 4.6 50 203.00JH M 16 × 60 zp 4.6 50 221.70JH M 16 × 80 zp 4.6 50 256.55JH M 16 × 100 zp 4.6 25 324.70JH M 16 × 125 zp 4.6 25 459.60JH M 16 × 150 zp 4.6 25 538.45JH M 16 × 200 zp 4.6 25 789.75

Hot-dip galvanised (hdg), Grade 4.6JH M 10 × 50 hdg 4.6 50 131.20JH M 10 × 60 hdg 4.6 50 134.60JH M 10 × 80 hdg 4.6 50 180.70JH M 12 × 30 hdg 4.6 100 131.55JH M 12 × 40 hdg 4.6 100 135.65JH M 12 × 60 hdg 4.6 50 152.00JH M 12 × 80 hdg 4.6 50 164.40JH M 12 × 100 hdg 4.6 25 265.25JH M 12 × 125 hdg 4.6 25 339.15JH M 16 × 40 hdg 4.6 50 185.65JH M 16 × 50 hdg 4.6 50 203.00

Hot-dip galvanised (hdg), Grade 8.8JH M 12 × 100 hdg 8.8 25 308.00JH M 16 × 60 hdg 8.8 50 380.95

JHThread × Length l

[mm]Pack Qty[Piece]

Price€/100 Piece

Stainless Steel, Quality A4-50JH M 10 × 30 A4-50 100 1029.40JH M 10 × 40 A4-50 100 1155.10JH M 10 × 50 A4-50 100 1195.80JH M 10 × 60 A4-50 100 1257.95JH M 12 × 25 A4-50 100 961.20JH M 12 × 30 A4-50 100 1009.90JH M 12 × 40 A4-50 100 1073.55JH M 12 × 50 A4-50 100 1155.10JH M 12 × 60 A4-50 100 1277.20JH M 12 × 80 A4-50 100 1317.70JH M 12 × 100 A4-50 100 1762.35JH M 12 × 150 A4-50 25 2812.15JH M 12 × 200 A4-50 50 3166.50JH M 16 × 25 A4-50 50 1298.60JH M 16 × 30 A4-50 50 1352.75JH M 16 × 40 A4-50 50 1468.85JH M 16 × 50 A4-50 25 1624.15JH M 16 × 60 A4-50 25 1726.85JH M 16 × 80 A4-50 25 1984.50JH M 16 × 100 A4-50 25 2226.75JH M 16 × 150 A4-50 25 3467.10JH M 16 × 200 A4-50 25 4165.30

2) T-bolts JH in combination with profi le W 38/23 not for longitudinal loads






T-boltsJD

22.4

l

For profi les: K 28/28, K 28/15, K 28/12, W 29/20 1)


Pack Qty[Piece]

Price€/100 Piece

Zinc-plated (zp), Grade 4.6JD M 6 × 15 zp 4.6 500 72.30JD M 6 × 20 zp 4.6 500 73.60JD M 6 × 25 zp 4.6 500 74.70JD M 6 × 30 zp 4.6 500 78.40JD M 6 × 40 zp 4.6 500 79.80JD M 6 × 50 zp 4.6 500 82.20JD M 6 × 60 zp 4.6 500 84.60JD M 8 × 15 zp 4.6 500 58.60JD M 8 × 20 zp 4.6 500 59.95JD M 8 × 25 zp 4.6 500 61.00JD M 8 × 30 zp 4.6 500 63.50JD M 8 × 40 zp 4.6 500 67.35JD M 8 × 50 zp 4.6 500 69.70JD M 8 × 60 zp 4.6 500 86.00JD M 8 × 70 zp 4.6 500 107.60JD M 8 × 80 zp 4.6 500 150.00JD M 8 × 100 zp 4.6 100 203.00JD M 8 × 150 zp 4.6 100 372.55JD M 10 × 15 zp 4.6 500 78.15JD M 10 × 20 zp 4.6 500 81.00JD M 10 × 25 zp 4.6 500 83.45JD M 10 × 30 zp 4.6 500 86.35JD M 10 × 40 zp 4.6 100 98.60JD M 10 × 50 zp 4.6 100 107.15JD M 10 × 60 zp 4.6 100 112.05JD M 10 × 80 zp 4.6 50 162.00JD M 10 × 100 zp 4.6 50 216.65JD M 10 × 125 zp 4.6 50 332.60JD M 10 × 150 zp 4.6 100 404.90JD M 10 × 200 zp 4.6 50 641.35JD M 12 × 30 zp 4.6 2) 200 150.70JD M 12 × 40 zp 4.6 2) 100 155.90JD M 12 × 50 zp 4.6 2) 100 164.40JD M 12 × 80 zp 4.6 2) 100 179.35

Hot-dip galvanised (hdg), Grade 4.6JD M 10 × 30 hdg 4.6 500 86.35JD M 10 × 40 hdg 4.6 100 98.60JD M 10 × 60 hdg 4.6 100 112.05JD M 10 × 80 hdg 4.6 50 162.00JD M 10 × 100 hdg 4.6 50 216.65JD M 12 × 50 hdg 4.6 2) 100 164.40

JDThread × Length l

[mm]Pack Qty[Piece]

Price€/100 Piece

Stainless Steel, Quality A4-50JD M 8 × 30 A4-50 100 591.25JD M 8 × 50 A4-50 100 693.05JD M 10 × 20 A4-50 100 606.70JD M 10 × 25 A4-50 100 633.60JD M 10 × 30 A4-50 100 661.05JD M 10 × 40 A4-50 100 713.05JD M 10 × 50 A4-50 100 775.35JD M 10 × 60 A4-50 100 823.60JD M 10 × 80 A4-50 100 1013.60JD M 10 × 100 A4-50 50 1339.50JD M 10 × 125 A4-50 50 1500.00JD M 10 × 150 A4-50 50 1715.20JD M 10 × 200 A4-50 50 2307.95

JG

17.0

l

For profi les: K 21/12


Pack Qty[Piece]

Price€/100 Piece

Zinc-plated (zp), Grade 4.6JG M 6 × 15 zp 4.6 500 61.00JG M 6 × 20 zp 4.6 500 64.70JG M 6 × 30 zp 4.6 500 68.60JG M 6 × 40 zp 4.6 200 73.60JG M 6 × 50 zp 4.6 200 79.80JG M 6 × 60 zp 4.6 100 84.60JG M 8 × 15 zp 4.6 400 61.00JG M 8 × 20 zp 4.6 400 63.50JG M 8 × 25 zp 4.6 400 64.70JG M 8 × 30 zp 4.6 400 66.05JG M 8 × 40 zp 4.6 400 73.60JG M 8 × 50 zp 4.6 400 81.00JG M 8 × 60 zp 4.6 100 94.70JG M 8 × 80 zp 4.6 100 274.05JG M 8 × 100 zp 4.6 100 280.30

Stainless Steel, Quality A4-50JG M 8 × 30 A4-50 250 540.80JG M 8 × 40 A4-50 250 577.50JG M 8 × 50 A4-50 250 666.90

1) T-bolts JD in combination with profi le W 29/20 not for longitudinal loads2) JD M 12 not for profi le K 28/12



Toothed T-bolts

JXE

l

For profi les: JXA and JXM W 64/44


Pack Qty[Piece]

Price€/100 Piece

Hot-dip galvanised (hdg), Grade 8.8JXE M 20 × 60 hdg 8.8 50 1587.85JXE M 20 × 100 hdg 8.8 25 1883.00JXE M 20 × 150 hdg 8.8 25 2226.15JXE M 24 × 75 hdg 8.8 25 1790.00JXE M 24 × 100 hdg 8.8 25 2026.30JXE M 24 × 150 hdg 8.8 25 2487.65


JXE M 20 × 50 FA-70 50 6914.05JXE M 20 × 100 FA-70 25 9303.25JXE M 24 × 50 FA-70 50 7338.65JXE M 24 × 100 FA-70 25 9810.35

JXB

41.6

l



Pack Qty[Piece]

Price€/100 Piece

Hot-dip galvanised (hdg), Grade 8.8JXB M 16 × 60 hdg 8.8 50 1272.10JXB M 16 × 80 hdg 8.8 25 1311.45JXB M 16 × 100 hdg 8.8 25 1352.00JXB M 20 × 65 hdg 8.8 25 1473.05JXB M 20 × 80 hdg 8.8 25 1514.00JXB M 20 × 100 hdg 8.8 25 1560.85JXB M 20 × 150 hdg 8.8 25 Price on request


JXB M 16 × 60 FA-70 25 5646.95JXB M 16 × 80 FA-70 25

Prices on requestJXB M 16 × 100 FA-70 25JXB M 20 × 80 FA-70 25 6926.25JXB M 20 × 100 FA-70 25 7025.80JXB M 20 × 150 FA-70 25 Price on request

Breaking Point T-bolts1)

JB-SB, JH-SB

60.0

JB-SB for profi les:W 55/42, W 53/34, K 53/34, K 50/40, W 50/30, K 50/30, K 48/26JH-SB for profi les:K 38/17, K 36/36, K 36/20, W 38/23


Pack Qty[Piece]

Price€/100 Piece

Zinc-plated (zp), Grade 4.6JB M 12 x 60 - SB 20 zp

On request

Prices on request

JB M 12 x 60 - SB 25 zpJH M 12 x 60 - SB 20 zpJH M 12 x 60 - SB 25 zp

1) With breaking point for concrete formwork, for example for formwork carriage in tunneling





T-boltsJXH

28.9



Pack Qty[Piece]

Price€/100 Piece

Zinc-plated (zp), Grade 8.8JXH M 12 × 30 zp 8.8 100 315.15JXH M 12 × 50 zp 8.8 100 338.95JXH M 12 × 100 zp 8.8 25 721.50JXH M 16 × 40 zp 8.8 50 400.85JXH M 16 × 60 zp 8.8 50 437.20JXH M 16 × 125 zp 8.8 25 721.65

Hot-dip galvanised (hdg), Grade 8.8JXH M 12 × 30 hdg 8.8 100 315.15JXH M 12 × 40 hdg 8.8 100 323.40JXH M 12 × 50 hdg 8.8 100 338.95JXH M 12 × 60 hdg 8.8 50 347.45JXH M 12 × 80 hdg 8.8 50 545.20JXH M 12 × 100 hdg 8.8 25 721.50JXH M 16 × 30 hdg 8.8 50 376.75JXH M 16 × 40 hdg 8.8 50 400.85JXH M 16 × 50 hdg 8.8 50 417.05JXH M 16 × 60 hdg 8.8 50 437.20JXH M 16 × 80 hdg 8.8 50 510.90JXH M 16 × 100 hdg 8.8 25 545.20JXH M 16 × 125 hdg 8.8 25 721.65JXH M 16 × 150 hdg 8.8 25 1359.55


JXH M 12 × 40 FA-70 50 1454.00JXH M 12 × 60 FA-70 50 1549.90JXH M 12 × 80 FA-70 50 2432.75JXH M 16 × 60 FA-70 25 1607.40

JXD

20.9

l



Pack Qty[Piece]

Price€/100 Piece

Zinc-plated (zp), Grade 8.8JXD M 12 × 30 zp 8.8 100 240.05JXD M 12 × 80 zp 8.8 100 333.10JXD M 12 × 100 zp 8.8 50 403.85

Hot-dip galvanised (hdg), Grade 8.8JXD M 10 × 40 hdg 8.8 100 218.60JXD M 12 × 30 hdg 8.8 100 240.05JXD M 12 × 40 hdg 8.8 100 259.75JXD M 12 × 50 hdg 8.8 100 279.60JXD M 12 × 60 hdg 8.8 100 284.00JXD M 12 × 80 hdg 8.8 100 333.10JXD M 12 × 100 hdg 8.8 50 403.85JXD M 12 × 125 hdg 8.8 50 560.90JXD M 12 × 150 hdg 8.8 25 1063.65


JXD M 12 × 40 FA-70 50 1819.40JXD M 12 × 60 FA-70 50 1988.60JXD M 12 × 80 FA-70 50 2333.15

JZS

34.5

l

For profi les: JZA and JZM K 41/22


Pack Qty[Piece]

Price€/100 Piece

Hot-dip galvanised (hdg), Grade 8.8JZS M 10 × 40 hdg 8.8 50 337.15JZS M 12 × 35 hdg 8.8 50 374.80JZS M 12 × 50 hdg 8.8 50 408.45JZS M 12 × 80 hdg 8.8 50 604.45JZS M 16 × 50 hdg 8.8 50 625.10JZS M 16 × 80 hdg 8.8 50 735.45JZS M 16 × 100 hdg 8.8 50 869.40

Stainless Steel, Quality A4-50JZS M 12 × 35 A4-50 50 2389.45JZS M 12 × 50 A4-50 50 2552.45JZS M 12 × 80 A4-50 50 2660.85JZS M 16 × 35 A4-50 25 2174.55JZS M 16 × 50 A4-50 25 2585.35JZS M 16 × 80 A4-50 25 3279.25JZS M 16 × 100 A4-50 25 3508.40

1) Description of FA also applies to F4 (1.4462)


Double-Notch Toothed T-bolts

JKB41.6

l

For profi les: W 50/30, W 53/34, W 55/42


Pack Qty[Piece]

Price€/100 Piece

Hot-dip galvanised (hdg), Grade 8.8JKB M 16 × 40 hdg 8.8 50 526.05JKB M 16 × 60 hdg 8.8 50 596.30JKB M 16 × 80 hdg 8.8 25 641.40JKB M 20 × 45 hdg 8.8 25 651.25JKB M 20 × 60 hdg 8.8 25 662.45JKB M 20 × 80 hdg 8.8 25 709.00

JKC

30.1

l

For profi les: W 40/22


Pack Qty[Piece]

Price€/100 Piece

Hot-dip galvanised (hdg), Grade 8.8JKC M 16 × 40 hdg 8.8 50 401.75JKC M 16 × 60 hdg 8.8 50 454.85JKC M 16 × 80 hdg 8.8 25 532.05






AccessoriesHook-head Locking Plates JGM (forged)

For Profi le MaterialThread

M 4 M 5 M 6 M 8 M 10 M 12Price € / 100 Piece

JGM HK 38/17K 36/36K 36/20

I × b × h [mm] – 30 × 14 × 6 30 × 14 × 6 30 × 14 × 6 30 × 18 × 8 30 × 18 × 8

l h

bPack Qty – 500 500 500 300 300

zp – 88.40 88.40 88.40 88.40 88.40

A4 – – 804.40 804.40 804.40 804.40

JGM DK 28/15K 28/28K 28/12

I × b × h [mm] 21 × 12 × 4 21 × 12 × 4 21 × 12 × 4 21 × 12 × 6 18 × 14 × 6 –Pack Qty 1000 1000 1000 1000 1000 –

zp 42.35 42.35 42.35 42.35 42.35 –Pack Qty 400 400 400 400 1000 –

A4 531.00 531.00 531.00 531.00 531.00 –JGM G

K 21/12

I × b × h [mm] 16 × 12 × 4 16 × 12 × 4 16 × 12 × 4 16 × 12 × 6 – –Pack Qty 1000 1000 1000 1000 – –

zp 41.10 41.10 41.10 41.10 – –A4 – 461.35 461.35 461.35 – –


M 6 M 8 M 10 M 12 M 16 M 20Price €/100 Piece

JGM AW 72/48 K 72/48

I × b × h [mm] – – – – – 57 × 31 × 22

bh

l

Pack Qty – – – – – 50zp

On requestA4

JGM B W 55/42W 53/34K 53/34K 50/40W 50/30K 50/30K 48/26

I × b × h [mm] 41 × 21 × 16 41 × 21 × 16 41 × 21 × 16 41 × 21 × 16 41 × 26 × 16 –

b

h

l

Pack Qty 100 100 100 100 100 –

zp 241.55 241.55 241.55 241.55 364.45 –

A4 1513.55 1513.55 1513.55 1513.55 1513.55 –

JGM CW 40/22K 40/25K 40/22

I × b × h [mm] 32 × 17 × 11 32 × 17 × 11 32 × 17 × 11 32 × 17 × 11 32 × 23 × 13 –

b

h

l

Pack Qty 250 250 250 250 250 –

zp 191.90 191.90 191.90 211.75 297.95 –

A4 1463.25 1463.25 1463.25 1488.35 1488.35 –


M 6 M 8 M 10 M 12Price €/100 Piece

JAM 22

K 41/41

I × b × h [mm] 35 × 20 × 6 35 × 20 × 6 30 × 18 × 8 35 × 20 × 9.5

l bh

Pack Qty 500 500 500 500zp 78.40 85.55 98.60 109.25

hdg 100.90 108.15 122.45 133.20JAM F 22 with spring

K 41/41

I × b × h [mm] 35 × 20 × 6 35 × 20 × 6 35 × 20 × 8 35 × 20 × 9.5

l bh

Pack Qty 500 500 500 500

zp 95.35 102.30 110.45 124.85

hdg 114.35 121.35 131.75 151.90

Type Material For Bolts Price €/100 Piece

16 hdg M 16; 8.8 316.30

Hammer-head Locking Plates JGM (fl at steel)

Channel Nuts JAM

Notch Toothed Bolts JKZS

CONNECTION SYSTEMS


Hexagon Bolts DIN EN ISO 4032 (DIN 934)

Washer DIN EN ISO 7089 (DIN 125) (without chamfer)

Spring Washer DIN 127

Hexagonal Coupling Sleeve

Coupling Sleeve Round

Washer DIN EN ISO 7093-1 (DIN 9021)

Self Locking Nut with Toothed Bearing

MaterialThread

M 6 M 8 M 10 M 12 M 16 M 20 M 24Price €/100 Piece

zp 2,70 5,10 10,25 16,60 29,45 59,75 116,15

hdg – – 10,25 16,60 29,45 59,75 116,15

A4 10,05 19,00 43,80 67,15 122,00 236,20 581,40

MaterialInternal Diameter [mm]

6.4 8.4 10.5 13 17 21 25 28 31Price €/100 Piece

zp 8.8

200 HV

2.90 4.40 7.35 8.70 15.85 31.00 44.80 69.80 75.50

hdg 8.8 4.35 6.60 11.05 13.05 23.80 46.50 67.20 94.45 116.20

A4-70 12.30 20.00 34.45 58.10 105.85 156.05 219.75 327.30 392.50

MaterialInternal Diameter [mm]

6.4 8.4 10.5 13 17 22Price €/100 Piece

zp 7.15 9.45 13.05 22.90 38.70 116.25

A4 31.50 41.70 56.15 112.15 142.50 400.30

Material A 6 A 8 A 10 A 12 A 16 A 20 A 24Price €/100 Piece

zp 2.70 3.00 4.60 7.00 14.45 23.20 50.25

A4 10.40 20.65 32.50 45.00 109.30 155.35 –

e

sL

MaterialThread × Length [mm]

M 6 × 15 M 8 × 20 M 10 × 25 M 12 × 30 M 16 × 40 M 20 × 50Price €/100 Piece

zp 48.30 72.95 199.20 231.55 352.50 514.35

A4 Prices on request

L

DMaterial

Thread × Length [mm]M 6 × 20 M 8 × 20 M 10 × 25 M 12 × 30 M 16 × 40 M 20 × 50

Price €/100 Piecezp 43.60 59.95 97.20 154.55 247.90 434.60

A4 Prices on request

Material ThreadM 12 M 16

zp 15.55 37.35





AccessoriesToothed Straps JVB-Z 1 )

Type JVB-Z Series Load Category FRd [kN]

JVB-L-Z/Series Slot Size €/PieceMaterial

zp A4

L

LL

12For profi leK 28/15

4.9

JVB- 90-Z/12 LL 11 × 55 8.80 13.80JVB-115-Z/12 LL 11 × 55 9.00 15.85JVB-140-Z/12 LL 11 × 55 9.00 16.40JVB-165-Z/12 LL 11 × 55 9.20 16.95JVB-190-Z/12 LL 11 × 55 9.35 17.05JVB-215-Z/12 LL 11 × 55 9.45 17.80JVB-240-Z/12 LL 11 × 55 9.50 18.55


9.8

JVB-115-Z/18 LL 13 × 55 10.20 19.30JVB-140-Z/18 LL 13 × 55 10.25 19.75JVB-165-Z/18 LL 13 × 55 10.30 20.15JVB-190-Z/18 LL 13 × 55 10.40 21.10JVB-215-Z/18 LL 13 × 55 10.75 21.65JVB-240-Z/18 LL 13 × 55 10.95 22.75

Type JVB-ZS Series Load Category FRd [kN]

JVB-L-ZS/Series Slot Size €/PieceMaterial

zp A4

L

LL


4.9

JVB-115-ZS/12 LL 11 × 55 15.25 29.95JVB-140-ZS/12 LL 11 × 55 15.35 30.60JVB-165-ZS/12 LL 11 × 55 15.40 31.45JVB-190-ZS/12 LL 11 × 55 15.75 31.80JVB-215-ZS/12 LL 11 × 55 15.80 32.75


9.8

JVB-140-ZS/18 LL 13 × 55 17.55 40.05JVB-165-ZS/18 LL 13 × 55 17.85 40.40JVB-190-ZS/18 LL 13 × 55 18.35 42.00JVB-215-ZS/18 LL 13 × 55 18.40 42.45

Toothed Straps JVB-ZS 1 )

Material and Design ■ hdg = hot-dip galvanised ■ zp = zinc-plated 1.0038 ■ A4 = Stainless Steel 1.4401/1.4404/1.4571

1) Price incl. counter plate 30 × 30 mm

CONNECTION SYSTEMS

Toothed Straps JVB-FTE (for precast connections under tensile load)

Type JVB-FTE Series Load Category FRd [kN]

JVB-FTE/Series Slot Size €/PieceMaterial

hdg A4

L

LL


17.2 JVB-FTE/22 LL 17 × 50 Price on request

Price on request

Counterplate

Counterplate

Counterplate

NEW!


Clamping Plates for Crane Rails

Material KP-A 45 KP-A 55 KP-A 65 KP-A 75Price €/100 Piece

Diameter � 22 mm � 18 mm/� 22 mm � 22 mm � 22 mm

hdg 863.05 915.35 967.70 1007.35

Material KP 50/7 KP 60/10 KP 60/12 KP 60/14 KP 60/16 KP 60/18 KP 60/20Price €/100 Piece

Slot Size LL 14 × 20 LL 18 × 24 LL 18 × 24 LL 18 × 24 LL 18 × 24 LL 18 × 24 LL 18 × 24hdg 750.25 824.35 839.40 855.40 870.40 886.65 902.85

SKUA SKUS

Material Price €/100 Piecehdg

793.10 Set consists of clamping claw SKUS

and adaptor SKUA For clamping level 5-40 mm For bolts M 12 8.8

Clamping Plates DIN 3568

Clamping Claw and Adaptor

Other diameters on request

Material ■ hdg = hot-dip

galvanised

Ordering Example Clamping Plates DIN 3568

Type Material

KP – 60/10 – hdg

JE Type Corresponding Anchor Channels

Pack Qty[Piece]

BoltThread

€/PieceMaterial

zp A4

JE 1 JTA K 28/15 25 M 8 3.70 7.80

JE 2

JTA K 38/17

25 M 10 4.20 9.15JTA W 40/22

JTA K 40/25

End Anchors for Anchor Channels

Type JVB-FTQ Series Load CategoryFRd [kN]

JVB-FTQ/Series Slot Size €/PieceMaterial

hdg A4

L

LL


5.0 JVB-FTQ/12 LL 11 × 20 Price on request

Price on request



Price on request



Price on request

Toothed Straps JVB-FTQ (for precast connections under transverse load)1)

Counter plate

NEW!

1) Expected to be available in the second half of 2014





Accessories

1) No standard T-bolt length

CONNECTION SYSTEMS

Clamp Connections JSV Material A4

(with right/left thread and hole)

SP 10 × 50 SP 10 × 80 SP 12 × 50 SP 12 × 80 SP 16 × 50 SP 16 × 80Price €/100 Piece

1939.90 2095.30 2337.45 2498.20 3331.95 3660.55

Material M 8 × 50 M 10 × 50 M 12 × 60 M 16 × 80 M 20 × 100Price €/100 Piece

zp 109.65 113.25 123.30 265.35 391.55A4 Prices on request

MaterialThread


black 185.65 293.90 401.05 541.75 758.35 1562.30zp 260.30 344.95 450.90 631.55 906.65 1956.60

MaterialThread


zp 120.90 139.60 216.65 308.90 637.75 938.95A4 858.65 1329.45 2085.15 3143.45 5153.05 8350.05

JSV Type Load Cate-gory FRd [kN] Sleeve Bolt Left-hand

ThreadBolt Right-hand

ThreadPrice

€/Piece

SP

JSV-28-14.9

SP 10 x 50 JDL-M 10 × 50 JD-M 10 × 40 40.35JSV-28-2 SP 10 x 80 JDL-M 10 × 50 JD-M 10 × 60 43.05JSV-38-1

7.0SP 12 x 50 JHL-M 12 × 50 JH-M 12 × 50 55.30

JSV-38-2 SP 12 x 80 JHL-M 12 × 50 JH-M 12 × 60 58.35JSV-38-3 SP 12 x 80 JHL-M 12 × 50 JH-M 12 × 100 63.40JSV-38-4

9.8SP 16 x 50 JHL-M 16 × 50 JH-M 16 × 50 78.10

JSV-38-5 SP 16 x 80 JHL-M 16 × 50 JH-M 16 × 80 85.30JSV-38-6 SP 16 x 80 JHL-M 16 × 50 JH-M 16 × 100 87.90JSV-40-1

11.2SP 16 x 50 JCL-M 16 × 50 JC-M 16 × 60 87.05

JSV-40-2 SP 16 x 80 JCL-M 16 × 50 JC-M 16 × 60 90.50JSV-40-3 SP 16 x 80 JCL-M 16 × 50 JC-M 16 × 100 108.85

Turnbuckle SP Material A4

Eyelet Socket ÖM

Ring Nuts RM DIN 582

Threaded Rods GS (Length L = 1.000 mm)

Pressure Bolt JDS Material A4

JDS Bolt Length [mm]Thread

M 10 M 12 M 16 M 20Price €/100 Piece

80 9.50 10.95 17.35 30.65100 9.50 10.95 17.35 30.65120 9.50 10.95 17.35 30.65140 9.50 10.95 17.35 30.65160 9.85 10.95 17.35 30.65180 10.10 12.00 18.20 33.70200 10.95 12.00 18.20 33.70

220 / 2401) Prices on requestRound plastic sleeve Sleeve length 80 mm 1.10 1.15 1.25 1.25


(type-examination tested)Frame Shoes JG

Type JG-K 4 JG-K 9 JG-K 12Colour Yellow Blue Red

Hole [mm] 2 × � 11 4 × � 14 4 × � 14 Frame Shoe €/Piece 22.35 27.80 36.95

Type JG-H 2,5 JG-H 5 1) JG-H 9 1) JG-L 2,5Colour Grey Blue Blue Grey

Frame Shoe €/Piece 27.95 35.95 35.95 22.05

Associated Sleeve

Sleeve Dimension 25 × 25 × 95 PE 30 × 30 × 95 PE 30 × 30 × 105 hdg 25 × 25 × 95 PEFrame Sleeve €/Piece 2.80 3.05 9.75 2.80

Material and Design ■ Frame shoe – steel 1.0038 colour coated ■ Sleeve St – steel 1.0038 ■ Sleeve PE – plastic

Frame shoes for square timber widths: 10 cm (12 cm on request)1) The frame shoes JG-H 5 and JG-H 9 are identically constructed

Ordering Example Frame Shoe

Type JG-K 4





Brick Ties

Series 12 Type JMA-.../12 3)

For profi les: Kt 25/15-D, K 28/15

b

L1= 20L 2

Length L2[mm]

Material€/100 Piece

hdg A485 68.60 314.30

120 78.40 383.65180 109.65 473.10300 203.00 695.65

JMA-G 150 / 12For profi le: JMA 120/12

€ / 100 Piece 130.85

Series 12 Type JMA-...-D/12 3)


25

L

Length L[mm]


A2125 198.00185 226.80245 255.80

Kt 25/15-D 1)

Brick Tie Anchor: Series 12Weight: 0.34 kg/m

15

25

Anchor[Piece/m]

Material€/m

sv A46/m 3.20 14.35

JTA K 28/15 2)


12

28

15

2.3 50

Anchor[Piece/m]

Material€/m

hdg A44/m 16.70 60.20

Fixed Length Surcharge 10 % 10 %

Brick Tie Channels / Anchor Channels

Thin-Bed Brick TieAnchors JMA-D

Sliding Sleeve

Brick Tie Anchor JMA

JTA K 38/17 2)


1718

3

38

80

Anchor[Piece/m]

Material€/m

hdg A44/m 22.30 90.20

Fixed Length Surcharge 10 % 10 %

Series 18 Type JMA-.../18 3)

For profi le: K 38/17

30

L1= 20L 2

Length L2[mm]


hdg A485 82.20 389.60

120 99.55 432.15180 133.30 509.85300 236.60 771.60

■ All prices incl. foamfi lling and nailholes

■ Fixed length: 1,050 mm < L < 6,000 mm

■ K 17/38 is also available with shortened anchors giving 55 mm installation depth, but without ETA or ABZ

■ Weight per metre valid for mill fi nish channel (for galvanised profi les: weight per metre + 10 %) for stainless steel profi les: weight per metre + 2 %)

1) Pack.-unit 1 bundle = 100 pieces stock length = 2,500 and 5,000 mm (-0/+50 mm) no fi xed length

2) Stock length: see page 73) Pack.-unit = 100 pieces

Material and Design ■ K = cold formed ■ hdg = hot-dip galvanised 1.0038 ■ sv = pre-galvanised 1.0038 ■ A2 = stainless steel,

1.4301/1.4541 ■ A4 = stainless steel,

1.4401/1.4404/1.4571

CONNECTION SYSTEMS


Series 12Type JMA-... × ...-Q/12 Type JMA-... × ...-QE/12


25

L 3

L 2

L 1 = 20 mm

25

L 1 = 20 mm

L 3

L 2

Length L2[mm]

Length L3[mm]


hdg A485

120

795.70 1251.65120 815.90 1318.60180 851.40 1440.95300 993.80 1959.3585

180

836.10 1379.60120 851.40 1440.95180 892.00 1563.40300 1014.95 2046.4585

300

982.65 1906.85120 993.80 1959.35180 1014.95 2036.45300 1170.55 2587.00

Series 18Type JMA-... × ...-Q/18 Type JMA-... × ...-QE/18


30

L 1 = 20 mm

L 3

L 2

30

L 3

L 2

L 1 = 20 mm

Length L2[mm]

Length L3[mm]


hdg A485

120

852.85 1418.65120 876.85 1512.95180 934.75 1720.30300 1042.40 2081.3085

180

905.75 1626.05120 934.70 1720.30180 992.50 1922.90300 1068.45 2188.1585

300

1027.45 2019.35120 1042.40 2081.30180 1068.45 2187.95300 1204.40 2611.20

Brick Tie Anchor JMA-Q and JMA-QE

Timber Fixing StrapSeries 18 Type JNA-.../18 1)


Length L[mm]


hdg100 145.70130 169.40200 222.95

35

L

Ordering Example Brick Tie Anchor Ordering Example Brick Tie Anchor

Type Length L2 × L3 Series Material

JMA – 85 × 120 – QE / 12 – hdg

Type Length Series Material

JMA – 180 – 12 – A4

Series 12 Type JNA-.../12 1)


Length L[mm]


hdg100 145.70130 169.40200 222.95

35

L

1) Pack Qty = 100 pieces





Reinforcing Element JDA(European Technical Approval ETA-13/0136)

(General Technical Approval Z-15.1-214)Anchor length

hA [mm]

Diameter Anchor dA [mm]

10 12 14 16 20 25

Reinforcing Element JDA-S(General Technical Approval Z-15.1-268) Price € / Piece

Two-anchor element

lL

dA

hA

125 9.45 10.40 – – – –135 9.45 10.40 – – – –145 9.45 10.45 11.15 – – –155 9.50 10.45 11.25 12.55 – –165 9.50 10.45 11.25 12.55 – –175 9.60 10.65 11.25 12.60 – –185 9.70 10.65 11.30 12.70 15.50 –195 9.70 10.70 11.30 12.70 15.50 –205 9.70 10.70 11.40 12.75 15.60 –215 9.75 10.75 11.45 12.85 15.65 –225 9.75 10.75 11.45 12.85 15.65 –235 9.85 10.90 11.65 13.10 15.80 –245 9.85 10.95 11.65 13.10 15.90 22.65255 9.85 10.95 11.65 13.10 15.95 22.65265 9.90 11.10 11.75 13.15 15.95 22.65275 10.00 11.15 11.85 13.25 16.15 22.75285 10.15 11.15 12.00 13.35 16.25 22.75295 10.35 11.20 12.00 13.55 16.30 22.85305 10.35 11.20 12.05 13.60 16.40 22.90315 10.40 11.25 12.10 13.65 16.50 23.05325 10.45 11.40 12.15 13.65 16.55 23.20335 10.60 11.45 12.30 13.70 16.60 23.35345 10.65 11.55 12.30 13.75 16.75 23.40355 10.70 11.70 12.45 13.85 16.85 23.45365 10.75 11.75 12.45 13.85 16.90 23.45375 10.90 11.85 12.50 13.95 17.05 23.70385 10.95 11.85 12.70 14.00 17.20 23.85395 11.05 12.00 12.75 14.05 17.20 23.90405 11.10 12.10 12.80 14.15 18.20 25.05415 11.20 12.15 12.85 14.30 18.40 25.10425 11.25 12.30 12.85 14.40 18.45 25.15435 11.25 12.30 13.10 14.50 18.50 25.40445 11.30 12.40 13.10 14.50 18.65 25.45455 11.45 12.45 13.15 14.60 18.80 25.55465 11.45 12.45 13.25 14.75 18.95 25.80475 11.55 12.60 13.35 14.75 19.05 25.95485 11.65 12.75 13.35 14.80 19.30 26.00495 11.75 12.75 13.60 14.90 19.35 26.05505 11.85 12.80 13.65 14.95 19.50 26.40515 12.00 12.85 13.70 15.00 19.60 26.55525 12.05 12.90 13.75 15.15 19.75 26.75535 12.15 13.10 13.85 15.20 19.90 26.90545 12.25 13.10 13.95 15.30 20.10 27.05555 12.30 13.15 14.05 15.40 20.15 27.15565 12.30 13.35 14.05 15.50 20.35 27.30575 12.40 13.35 14.10 15.55 20.45 27.45585 12.45 13.55 14.30 15.60 20.50 27.55595 12.45 13.60 14.40 15.65 20.60 27.70605 12.50 13.65 14.40 15.65 20.90 27.95615 12.75 13.70 14.50 15.90 20.95 28.15625 12.75 13.75 14.60 15.95 21.05 28.25635 12.80 13.85 14.65 16.15 21.15 28.40645 12.85 13.95 14.75 16.20 21.35 28.55655 12.90 14.00 14.80 16.25 21.50 28.60665 13.05 14.05 14.90 16.40 21.55 28.80675 13.10 14.05 14.90 16.40 21.75 28.85685 13.15 14.10 15.00 16.45 21.80 28.90695 13.20 14.15 15.15 16.50 21.90 29.05

Punching Shear Reinforcement JDA/JDA-SETA (European Technical Approval for static and dynamic eff ects ETA-13/0136)

Assembly aid JDA-Q

Price € / Piece1.00

Price Calculation for Multi-anchors:Price = Price JDA with 2 Anchors × Factor

Anchor Number Factor4 2.05 2.56 3.07 3.58 4.0

Material ■ BSt 500 S ■ Bars of structural steel


Ordering Example Punching Shear Reinforcement

Type No. of Anchors

Anchor dA AnchorHeight hA

Strip Length lL

JDA – 2 / 14 / 225 – 340

NEWwith ETA!


Standard Elements

Reinforcing Element JDA(European Technical Approval ETA-13/0136)

(General Technical Approval Z-15.1-214)Anchor length

hA [mm]

Diameter Anchor dA [mm]

10 12 14 16 20 25

Reinforcing Element JDA-S(General Technical Approval Z-15.1-268) Price € / Piece

Three-anchor element

lL

dA

hA

125 14.05 15.55 – – – –135 14.05 15.55 – – – –145 14.05 15.65 16.75 – – –155 14.15 15.65 16.85 18.65 – –165 14.30 15.65 16.85 18.65 – –175 14.40 15.95 16.90 18.70 – –185 14.50 15.95 17.05 18.80 23.20 –195 14.50 15.95 17.20 19.00 23.25 –205 14.50 15.95 17.20 19.10 23.35 –215 14.65 16.15 17.25 19.30 23.50 –225 14.65 16.15 17.25 19.50 23.60 –235 14.75 16.30 17.40 19.60 23.80 –245 14.80 16.40 17.40 19.60 23.85 33.90255 14.80 16.40 17.40 19.65 23.90 33.90265 14.95 16.60 17.75 19.75 23.95 33.90275 15.00 16.75 17.85 19.90 24.10 34.05285 15.20 16.75 17.85 20.10 24.30 34.20295 15.45 16.80 17.85 20.15 24.55 34.30305 15.55 16.80 17.95 20.20 24.65 34.45315 15.55 16.90 18.05 20.40 24.75 34.70325 15.65 17.20 18.10 20.50 24.80 34.75335 15.80 17.20 18.40 20.50 24.95 34.95345 15.95 17.30 18.40 20.60 25.00 35.10355 15.95 17.70 18.65 20.60 25.15 35.10365 16.15 17.75 18.80 20.75 25.45 35.30375 16.30 17.85 18.85 20.95 25.55 35.50385 16.40 17.85 19.00 20.95 25.75 35.70395 16.50 17.85 19.05 21.05 25.85 35.90405 16.60 18.05 19.30 21.35 27.40 37.50415 16.80 18.10 19.30 21.45 27.55 37.75425 16.85 18.40 19.50 21.50 27.65 37.75435 16.90 18.40 19.60 21.75 27.70 37.95445 17.05 18.55 19.65 21.80 28.00 38.20455 17.20 18.65 19.75 21.85 28.25 38.35465 17.25 18.80 19.90 22.10 28.40 38.65475 17.30 18.85 20.05 22.20 28.55 38.90485 17.40 19.05 20.10 22.30 28.85 39.00495 17.75 19.05 20.20 22.35 29.10 39.25505 17.85 19.30 20.50 22.45 29.15 39.60515 17.85 19.30 20.50 22.60 29.40 39.85525 17.95 19.50 20.60 22.65 29.65 40.05535 18.10 19.60 20.75 22.70 29.80 40.40545 18.20 19.65 20.95 22.85 30.05 40.60555 18.40 19.75 21.05 22.95 30.25 40.80565 18.40 20.05 21.10 23.20 30.45 40.95575 18.55 20.10 21.30 23.35 30.65 41.10585 18.65 20.15 21.45 23.45 30.75 41.45595 18.80 20.20 21.50 23.55 30.90 41.60605 18.85 20.50 21.60 23.60 31.30 41.85615 19.05 20.50 21.80 23.85 31.45 42.10625 19.10 20.60 21.85 23.95 31.60 42.45635 19.30 20.60 22.00 24.10 31.85 42.60645 19.30 20.95 22.20 24.20 32.00 42.80655 19.50 20.95 22.30 24.30 32.25 42.95665 19.60 21.05 22.35 24.55 32.45 43.10675 19.65 21.10 22.45 24.65 32.65 43.25685 19.75 21.30 22.65 24.70 32.80 43.50695 19.90 21.30 22.75 24.80 33.10 43.80

Spacers Material €/PieceFor in-situ concrete use

AH-DA 15/20 Plastic 0.20AH-DA 25 Plastic 0.20AH-DA 30 Plastic 0.20AH-DA 35 Plastic 0.20

For pre-cast concrete useFBA 15 Fibre concrete 0.25FBA 20 Fibre concrete 0.25FBA 25 Fibre concrete 0.25FBA 30 Fibre concrete 0.25AH-FT 15 Plastic 0.20AH-FT 20 Plastic 0.20AH-FT 25 Plastic 0.20AH-FT 30 Plastic 0.20

Ordering Example Punching Shear Reinforcement

Type No. of Anchors

Anchor dA AnchorHeight hA

StripLength lL

JDA – 3 / 14 / 225 – 510

Other lengths on request





Shear ConnectorMaterial Stainless Steel(General Technical Approval Z-15.7-237)

Fire Protection Collars JBRM

TypePrice €/Piece

Joint Width20 mm 30 mm

JBRM 20 6.95 7.80JBRM 25 6.95 7.80JBRM 30 6.95 7.80JBRM 45 8.65 9.00JBRM 60 9.00 10.20JBRM 90 10.80 11.75JBRM 120 12.15 13.10JBRM 130 12.85 13.95JBRM 150 13.60 14.80JBRM 400 18.50 19.80JBRM 450 22.05 23.80

Ordering Example Double Shear Connector JDSD 60 HFComplete (dowel element and sleeve)

Type Size

JDSD 60 HF

Ordering Example Fire Protection Collars for Double Shear Connector JDSD 60 HF in 20 mm building joint

Type of Dowel

Size of Dowel Fire Protection Collar

Joint width[mm]

JDSD 60 HF – JBRM – 20

Double Shear Connector JDSD

TypePrice €/Piece

Dowel Socket (Sliding Tube)

Dowel + Socket

JDSD 20 HF 58.10 25.65 83.80JDSD 25 HF 72.90 34.25 107.15JDSD 30 HF 91.15 38.75 129.95JDSD 45 HF 104.85 44.80 149.70JDSD 60 HF 121.05 50.20 171.25JDSD 90 HF 224.30 69.30 293.70JDSD 120 HF 269.95 105.25 375.20JDSD 130 311.30 174.05 485.35JDSD 150 504.00 218.95 722.90JDSD 400 1137.90 334.90 1472.85JDSD 450 1743.60 356.60 2100.25

Dowel

Socket(Sliding Tube)



Double Shear Connector JDSDQ

TypePrice €/Piece

DowelSocket

(rectangular tube)

Dowel +Socket

JDSDQ 25 HF 72.90 70.05 142.90JDSDQ 30 HF 91.15 77.90 169.05JDSDQ 45 HF 104.85 85.05 189.95JDSDQ 60 HF 121.05 103.15 224.20JDSDQ 90 HF 224.30 170.90 395.25JDSDQ 120 HF 269.95 250.40 520.30JDSDQ 130 311.30 323.40 634.70JDSDQ 150 504.00 448.60 952.55JDSDQ 400 1137.90 834.45 1972.35JDSDQ 450 1743.60 1040.40 2784.05

Socket(rectangular sliding tube)

Dowel

Ordering Example Double Shear Connector JDSDQ 60 HFComplete (dowel element and sleeve)

Type Size

JDSDQ 60 HF

Fire Protection Collars JBRMQ

TypePrice €/Piece

Joint Width20 mm 30 mm

JBRMQ 25 8.05 8.65JBRMQ 30 8.05 8.65JBRMQ 45 9.00 10.20JBRMQ 60 12.15 12.95JBRMQ 90 12.70 14.50JBRMQ 120 13.70 15.60JBRMQ 130 14.90 17.25JBRMQ 150 15.95 18.95JBRMQ 400 21.80 25.00JBRMQ 450 25.80 29.00

Ordering Example Fire Protection Collars for Double Shear Connector JDSDQ 60 HF in 20 mm building joint

Type of Dowel

Size of Dowel Fire Protection Collar

Joint width[mm]

JDSDQ 60 HF – JBRMQ – 20





JVAeco+ N JVAeco+ NA JVAeco+ NU

Load Category

Cantilevered LengthL [mm]

Price €/Piece

3.5 230 – 390Prices on request7.0 230 – 390

10.5 230 – 390

Brickwork Support Brackets

Intermediate and special sizes available on request.

Ordering Example Support Brackets JVAeco+ NA Cantilevered length 230 mm, load category 3.5; off set 100 mm

Type Cantilevered Length

Type Load Category

Off set

JVAeco+ 230 – NA / 3.5 A = 100

Brickwork Support Brackets JVAeco+ N, JVAeco+ NA, JVAeco+ NU

Off set Height for Example

100 mm

Diff erent lengths and angle measurements available on request.

Angled Bracket JW

Angled DimensionsHW × BW × SW [mm]

Length [mm]

Price€/Piece

25 × 90 × 2 480Prices on request30 × 90 × 3 730

50 × 90 × 3 980

Ordering Example Angled Bracket JW

Type Angled Length Angled DimensionsHW × BW × SW

JW – 980 L 50 × 90 × 3

Angled Bracket JW

Material and Design ■ Stainless steel corrosion resistance class III

FAÇADE CONNECTION SYSTEMS

System consists of: ■ JORDAHL® brickworksupport bracket

■ Oblique wedge adjuster, p. 43 ■ Clamping washer, p. 43

ABZ (General Technical Approval Z-21.8-1868)TP-12-009 Type Approval

JVA+ N JVA+ NA JVA+ NU

Load Category


Price €/Piece


10.5 130 – 390


Ordering Example Support Brackets JVA+ NA Cantilevered length 150 mm, load category 3.5; off set 100 mm


Type Load Category

Off set

JVA+ 150 – NA / 3.5 A = 100

Brickwork Support Brackets JVA+ N, JVA+ NA, JVA+ NU

Off set Height for Example

100 mm

NEW!


Brickwork Support Brackets JVAeco+ P, JVAeco+ PARJVAeco+ P JVAeco+ PAR

Load Category


Price €/Piece


10.5 230 – 390

Off set Heightfor Example

100 mm

Ordering Example Support Brackets JVAeco+ PAR Cantilevered length 230 mm, load category 3.5; off set 100 mm



Type Load Category

Off set

JVAeco+ 230 – PAR / 3.5 A = 100

Brickwork Support Brackets JVA+ P and PARJVA+ P JVA+ PAR

Load Category


Price €/Piece


10.5 130 – 390


100 mm

Ordering Example Support Brackets JVA + PAR Cantilevered length 150 mm, load category 3.5; off set 100 mm



Type Load Category

Off set

JVA+ 150 – PAR / 3.5 A = 100

Brickwork Support Brackets JVA+ E and EAOrdering Example Support Brackets JVA+ EA Cantilevered length 150 mm, load category 3.5, off set 100 mm


Type Load Category

Off set

JVA+ 150 – EA / 3.5 A = 100


JVA+ E JVA+ EA

Load Category


Price €/Piece


7.0 150 – 390


100 mm

NEW!





Brickwork Support Brackets Brickwork Support Brackets JVAeco+ F, JVAeco+ FAR

Ordering Example Brickwork Support Brackets JVAeco+ F Cantilevered length 230 mm, load category 7.0; angle length 1,250 mm, chosen support angle (L 50 × 100 × 3)

Type Canti-levered

Length L

Angled Length LW

Type Load Cate-gory

Angle Dimensions

JVAeco+ 230 – 1250 – F / 7.0 ( L 50 × 100 × 3)

JVAeco+ F JVAeco+ FAR

Load Category

Cantilevered Length L [mm]

Length [mm] Price €/Piece

3.5 230 – 390 1000Prices on request7.0 230 – 390 1250

10.5 230 – 390 1500

Other designs are available on request.

Type Thickness JRH 5 / 11.5

JRH O JRH 1-7

B

S

190

HW

BW

SW

190

Type for Angle DimensionsHW × BW × SW [mm]

Price€/Piece

JRH 0/11.5 for JVAeco+ and JVA+ N, NA, NU

Prices on request

JRH 1/11.5 30 – 35 × 80 – 100 × 3 – 8JRH 2/11.5 40 – 45 × 80 – 100 × 3 – 8JRH 3/11.5 50 – 55 × 80 – 100 × 3 – 8JRH 4/11.5 60 – 65 × 80 – 100 × 3 – 8JRH 5/11.5 70 – 75 × 80 – 100 × 3 – 8JRH 6/11.5 80 – 85 × 80 – 100 × 3 – 8JRH 7/11.5 90 – 95 × 80 – 100 × 3 – 8

Suspension Loop JRH

Type �[mm]

Length[mm]

Price€/m

ESD 4 3000 Price on request

Stainless Steel Wire ESD


100 mm

JRH 20 JRH 21-27

B

51

BW

HW

51

Type for Angle DimensionsHW × BW × SW [mm]

Price€/Piece

JRH 20/11.5 for JVAeco+ and JVA+ N, NA, NU

Prices on request

JRH 21/11.5 30 – 35 × 80 – 100 × 3 – 8JRH 22/11.5 40 – 45 × 80 – 100 × 3 – 8JRH 23/11.5 50 – 55 × 80 – 100 × 3 – 8JRH 24/11.5 60 – 65 × 80 – 100 × 3 – 8JRH 25/11.5 70 – 75 × 80 – 100 × 3 – 8JRH 26/11.5 80 – 85 × 80 – 100 × 3 – 8JRH 27/11.5 90 – 95 × 80 – 100 × 3 – 8

Suspension Loop JRH for Stretcher Lintel

Brickwork Support Brackets JVA+ F and FAROrdering Example Brickwork Support Brackets JVA+ F Cantilevered length 190 mm, load category 7.0; angle length 1,250 mm, chosen support angle (L 50 × 100 × 3)

Type Canti-levered

Length L

Angled Length LW

Type Load Cate-gory

Angle Dimensions

JVA + 190 – 1250 – F / 7.0 ( L 50 × 100 × 3)

JVA+ F JVA+ FAR

Load Category


Length [mm] Price €/Piece

3.5 130 – 390 1000Prices on request7.0 130 – 390 1250

10.5 130 – 390 1500


100 mm

B

BW

HW

NEW!

NEW!



Brickwork Support Brackets and Accessories

Prefabricated Part Holder JFT Threaded Loop JGSJGS

Type Price €/PieceJGS M 8

Prices on requestJGS M 10

JFT

Type Price €/Piece

JFT–K 28/15Prices on requestJFT–K 38/17

JFT–K 50/30

Ordering Example Threaded Loop JGS F or load category 7.0

Type Thread

JGS M 8


JVAeco+ NFT JVAeco+ NAFT

Load Category


Price €/Piece


10.5 230 – 390


Brickwork Support Brackets JVAeco+ NFT, JVAeco+ NAFT


100 mm

Ordering Example Brickwork Support Brackets JVAeco+ NAFTCantilevered length 230 mm, load category 7.0; off set 100 mm


Type Load Category

Off set

JVAeco+ 230 – NAFT / 7.0 A = 100


JVA+ NFT JVA+ NAFT

Load Category


Price €/Piece


10.5 130 – 390


Brickwork Support Brackets JVA+ NFT, JVA+ NAFT


100 mm

Ordering Example Brickwork Support Brackets JVA+ NAFTCantilevered length 190 mm, load category 7.0; off set 100 mm


Type Load Category

Off set

JVA+ 190 – NAFT / 7.0 A = 100


Ordering Example Prefabricated Part Holder JFT For load category 3.5

Type Profi le

JFT – K28/15

Special forms available on request.

T

NEW!




FAÇADE CONNECTION SYSTEMSCONNECTION SYSTEMS MOUNTING TECHNOLOGYFASSADENBEFESTIGUNG

Ordering Example Angled Support Bracket L-DF+ Cantilevered length = 190 mm, load category 3.2; angle length = 1,000 mm

Angled Support Brackets L-DF+, L-DN+ and L-F+L-F+

Load Categ.


Price €/PieceLW = 500 mm LW = 750 mm LW= 1000 mm


3.2 110 – 130

L-DF+ / L-DN+1)

Load Categ.


Price €/Piece

LW = 500 mm LW = 750 mm LW = 1000 mm1.5 130 – 330

Prices on request3.2 130 – 330

Type Cantil. Length L Angled Length LW Load Category

L-DF+ 190 – 1000 / 3.2 Intermediate and special sizes available on request.

1) L-DN+ not shown

Brickwork Support Brackets and Accessories JAW for the Part Lintel

JAW

Load Category Price €/PieceJAW-2.6

Prices on requestJAW-3.5JAW-4.2JAW-5.5JAW-7.0



JMK+ N / JMK+ NA 1) JMK+ E / JMK+ EA 1) JMK+ P / JMK+ PAR 1)

Cantilevered Length L [mm] = 110 – 330

Load Category 3.5 + 7.0Price €/Piece

JMK+ N JMK+ NA 1) JMK+ E JMK+ EA 1) JMK+ P JMK+ PAR1)

Prices on request Prices on request Prices on request

1) Off set height not shown.The corresponding angle can be found on page 36. Other designs are available on request.

Grout-in Bracket JMK+

Ordering Example Grout-in Bracket JMK-E Shell space a = 50 mm, load category 3.5 kN

Type Cantilevered Length Type Load Category

JMK+ – 140 – E / 3.5

Intermediate and special sizes available on request


Adjustment Foot Additional Component

Tiefe

Type Wall Thickness[mm]

Load Category Price€/Piece

JVA+ZB175 7.0

Prices on request240 7.0

365 7.0

Ordering Example Attic Brick Anchor JAV

75

Length[mm]

Price€/Piece

600

Prices on request850

1100

Attic Brick Anchor JAV

Special sizes available on request

Type Depth of Construction Length L

JAV 75 / 600

Corresponding brick ties to be found on page 30.

Load Category Price €/Piece3.5

Prices on request7.010.5

Depth





Brickwork Support Brackets and Accessories

Bracket bolt with Partial Thread and Nut3)

Type Applicable Price€/100 Piecefor Channel Bracket LS

JH M 12 × 70 T A4-Set JTA K 38/17 3.5Prices on requestJB M 12 × 80 T A4 –70-Set JTA K 50/30 7.0

JB M 16 × 85 T A4-Set JTA K 53/34 10.5

More hammer-head and hook-head T-bolts can be found on page 16 ff .

Compensating BracketType Material Thick-

ness [mm]Price

€/Piece

Compensa-ting Bracket

2

Prices on request

3456


3) Set including bolt, nut, wedge adjuster, U-plate



Material and Design Scaffold Anchor ■ Stainless steel corrosion resistance class III

Scaff old Anchor with Inner Thread, incl. Plastic Cap

JGA + Q

Type Price €/Piece 1)

JGA + Q – 150 – 390 Price on request

Ring Bolt FIG

Type Price €/PieceFIG M 12 × 40 zp Price on request

1 ) Incl. grey plastic cap2) Incl. dowel and grey plastic cap

JGA + Z

Type Price €/Piece 2)

JGA + Z – 110 – 390 Price on request

Ordering Example Scaffold Anchor Type JGA + QTotal load Ü: 85 + 115 = 200 mm

Ordering Example Scaffold Anchor Type JGA + ZTotal load Ü: 85 + 115 = 200 mm

Type Length L

JGA + Q 190

Type Length L

JGA + Z 190



DowelsType Price

€/PieceAnchor bolt M 10/10 A4

Prices on request

Anchor bolt M 12/10 A4Anchor bolt M 12/50 A4-Set 1)

Anchor bolt M 12/60 A4-Set 1)

Anchor bolt M 16/100 A4-Set 1)

Stud anchor M 12 × 75/60 A4-Set 2)




Cleaning brush BS 12 3)

Cleaning brush BS 14 4)

Cleaning brush BS 16/18 5)

Relief valve

Wedge Adjuster, U-Plate

Type Material Strength [mm]

Price€/Piece

Wedge Adjuster 3.5/7.0/10.5

Prices on request

U-Plate3.5/7.0

10.5

1 ) Set incl. wedge adjuster and clamping plate2) Set incl. injection mortar cartridge, perforated plate and clamping pla-

te; injection mortar cartouche and cartridge applicator gun available on request

3) For stud anchors M 12 × 754) For stud anchors M 12 × 1205) For stud anchors M16

Ordering Example Cavity Wall Ties L-form

Type Length L [mm]

JLA W – L 4/250Material and Design

■ Stainless steel corrosion resistance class III

Insulation Retainer Water Barrier Disc ISO-Clip

Price €/100 PiecePrice on request

Cavity Wall Ties JLA W-L

L

Type Article Name[mm]

Price 3 )

W – L

W-L-3/250

Prices on request

W-L-3/300

W-L-4/225

W-L-4/250

W-L-4/275

W-L-4/300

W-L-4/340

Dowel Anchor JLA D-ZV

D – ZV

D-ZV-4/160

D-ZV-4/180

D-ZV-4/210

D-ZV-4/250

D-ZV-4/275

D-ZV-4/300

D-ZV-4/320

D-ZV-4/350

Cavity Wall Ties

Insulation Retainer, Water Barrier Disc, ISO-Clip

1) Sold only in complete pack.-unit. 1 pack.-unit = 250 items. Other types available on request

L





Profi le Material Price€/m

Cutting Rate €/Piece

JXM W 64/44

T-bolt: JXE M 20 – M 24 Weight: 7.19 kg/m

black 75.35 16.95hdg 112.45 16.95A2 – –A4 Price on request

JXM W 53/34

T-bolt: JXB M 16 – M 20Weight: 4.65 kg/m

black 51.35 11.80hdg 76.70 11.80A2 – –A4 441.80 24.10

23

38

18

3

5.5

JXM W 38/23

T-bolt: JXH M 12 – M 16 JH M 10 – M 16

Weight: 2.42 kg/m

black 19.45 7.45hdg 30.65 7.45A2 – –A4 196.30 9.60

20

29

14

2.55

JXM W 29/20

T-bolt: JXD M 12 JD M 6 – M 12

Weight: 1.55 kg/m

black 13.10 4.65hdg 20.00 4.65A2 – –A4 – –

Mounting ChannelsJM W

JXM W



48

5

72

33

15.5

JM W 72/48

T-bolt: JA M 20 – M 30Weight: 8.85 kg/m

black 51.35 11.80hdg 76.50 11.80A2 – –A4 441.80 24.10

42

55

2612.9

5 JM W 55/42

T-bolt: JB M 10 – M 24Weight: 6.57 kg/m

black 46.10 11.80hdg 69.70 11.80A2 – –A4 – –

34

53

22

10.5

JM W 53/34


black 28.95 11.80hdg 43.95 11.80A2 – –A4 253.30 13.55

30

50

22

2.75

7.9

JM W 50/30


black 19.45 7.45hdg 30.65 7.45A2 – –A4 196.30 9.60

2240

18

2.4

6

JM W 40/22

T-bolt: JC M 10 – M 16Weight: 2.12 kg/m

black 13.10 4.65hdg 20.00 4.65A2 – –A4 116.35 7.45

MOUNTING TECHNOLOGY


JM K



JM K 72/48

T-bolt: JA M 20 – M 30Weight: 8.09 kg/m

black 46.70 11.80hdg 65.75 11.80A2 – –A4 317.05 13.70

34

4.5

53

228

JM K 53/34


black 17.45 7.45hdg 29.25 7.45A2 – –A4 141.30 11.80

JM K 50/40 1)


black 16.20 –hdg 28.40 –A2 – –A4 – –

30

3

50

227.4

JM K 50/30


black 13.20 4.65hdg 23.15 4.65A2 – –A4 115.95 7.45

26

2.5

48

226

JM K 48/26 1)


black 12.10 –hdg 19.30 –A2 – –A4 – –

41

2.5

41

227

JM K 41/41 1)

Channel Nuts: JAM (F) 22 M 6 – M 12

Weight: 2.61 kg/m

black 11.80 –hdg 19.90 –A2 – –A4 – –

25

2.75

40

185.5

JM K 40/25


black 9.55 4.65hdg 16.25 4.65A2 60.15 7.45A4 78.30 7.45

JM K 40/22


black 6.60 4.65hdg 12.40 4.65A2 – –A4 – –

JM K 38/17

T-bolt: JH M 10 – M 16.Weight: 1.77 kg/m

black 8.15 3.35hdg 13.45 3.35A2 49.45 5.20A4 64.15 5.20

Ordering Example Framing Channel JM

Type Profi leSize

Channel Length

Material

JM W 50/30 – 6,000 – hdg

1) Available in 6,000 mm only

Associated T-bolts: see pages 16 – 22.

Material and Design ■ black = mill fi nish 1.0038/1.0044 ■ hdg = hot-dip galvanised 1.0038/1.0044 ■ A2 = stainless steel 1.4301/1.4541 ■ A4 = stainless steel 1.4401/1.4404/1.4571 ■ W = hot rolled ■ K = cold formed







362.5

36

18

JM K 36/36 1)

T-bolt: JH M 10 – M 16Weight: 2.20 kg/m

black 9.75 –hdg 16.90 –A2 – –A4 75.60 –

202.25

36

18

JM K 36/20 1)

T-bolt: JH M 10 – M 16 Weight: 1.44 kg/m

black 6.60 –hdg 11.15 –A2 – –A4 – –

JM K 28/28 1)

T-bolt: JD M 6 – M 12Weight: 1.39 kg/m

black 6.25 –hdg 9.75 –A2 – –A4 50.65 –

152.3

28

12

JM K 28/15


black 5.10 3.35hdg 8.25 3.35A2 30.90 5.20A4 40.85 5.20

JM K 28/12


black 4.40 3.35hdg 6.85 3.35A2 25.70 5.20A4 40.70 5.20

211.6 12

11

JM K 21/12 1)

T-bolt: JG M 6 – M 8Weight: 0.58 kg/m

black – –sv 5.00 –A2 – –A4 – –



224122

2.5

7.5

JZM K 41/22

T-bolt: JZS M 10 – M 16Weight: 1.88 kg/m

black 15.05 4.65hdg 22.90 4.65A2 – –A4 92.15 7.45

Toothed Framing Channels JZM K

JM K

1) Available in 6,000 mm only

■ All prices incl. foamfi lling and nailholes ■ Stock length = 6,000 mm (-0/+50 mm) ■ Fixed length: L < 6,000 mm ■ Short pieces < 1,000 mm on request ■ Weight per metre for mill fi nish version (for galvanised profi les: weight per metre +10 %; for stainless steel profi les: weight per metre +2 %)

MOUNTING TECHNOLOGY


224122

2.5

7.5

JZML K 41/22

T-bolt: JZS M 12 – M 16Weight: 1.74 kg/mLL 11 × 40 mm

black 19.25 4.65hdg 25.00 4.65A4 95.55 7.45

Slotted Back Channel Type JML K


Cutting Rate€/Piece

JML K 50/40 1)

T-bolt: JB M 10 – M 20Weight: 3.25 kg/mLL 11 × 40 mm

black 17.45 –

hdg 29.65 –

A4 – –

41

41

227

2.5 JML K 41/41 1)

Channel Nuts: JAM (F) 22 M 6 – M 12

Weight: 2.47 kg/mLL 11 × 40 mm

black 13.45 –

hdg 21.50 –

A4 – –

2540

185

2.75 JML K 40/25

T-bolt: JC M 10 – M 16Weight: 1.86 kg/mLL 11 × 40 mm

black 11.80 4.65

hdg 18.50 4.65

A4 81.55 7.45

36

36

18

2.5 JML K 36/36 1)

T-bolt: JH M 10 – M 16Weight: 2.09 kg/mLL 11 × 40 mm

black 10.90 –

hdg 18.00 –

A4 78.65 –

JML K 28/28 1)

T-bolt: JD M 6 – M 12Weight: 1.28 kg/m LL 11 × 40 mm

black 7.15 –

hdg 11.80 –

A4 53.75 –

15

28

12

2.3

JML K 28/15

T-bolt: JD M 6 – M 12Weight: 1.02 kg/mLL 9 × 25 mm

black 6.25 3.35

hdg 9.50 3.35

A4 44.25 5.20

Toothed Slotted Back Channel JZML K

1) Available in 6,000 mm onlyLL = Slot Size

LL = Slot Size

■ Spacing of the slotted hole centres on perforated channel for installation: 60 mm (other slotted holes on request)

Material and Design ■ black = mill fi nish version 1.0038/1.0044 ■ hdg = hot-dip galvanised 1.0038/1.0044 ■ sv = pre-galvanised ■ A2 = stainless steel 1.4301/1.4541 ■ A4 = stainless steel 1.4401/1.4404/1.4571 ■ W = hot rolled ■ K = cold formed

Ordering Example Slotted Back Channel JML

Type Profi le Size

Channel Length

Material

JML – K 40/25 – 6,000 – hdg

Associated T-bolts: see pages 16 – 22.





Service

Technical AdviceIn addition to the technical information in our brochures and on our website, our engineers will make static calcu-lations and provide technical advice on request.

Design SoftwareEasy-to-use design software is available to help identify the best products for individual installation situations. This software is available to download free of charge.

Installation Instructions / VideosIn order to achieve optimum results from the use of JORDAHL® products, various installation instructions and videos are available to download.

Tender TextsCompleted tender texts are available for all of the JOR-DAHL product ranges. These contain all of the relevant technical information with regard to material, bearing capacity and sizes together with notes on installation.The data can be exported, e. g. in GAEB-format, and sent as an e-mail attachment or stored as a data fi le.

Additional Ordering Information

All deliveries are made solely in accordance with the Terms of Delivery and Payment dated October 2012 (see page 50).

PricesThe list prices are ex works, excluding packaging, plus the applicable statutory rate of VAT.

Surcharges for Small QuantitiesFor consignments with a value of less than £ 150,00 we charge a small quantities surcharge of £ 25,00.For incomplete pack.-units we charge a handling fee of 20 % of Netto value.

SurchargesIn addition, the list prices are subject to the alloysurcharges, steel surcharges and other surchargesapplicable on the date of delivery.

Return of GoodsGoods may only be returned by agreement and in a resaleable condition. A re-stocking fee of 15 % of the net value will be invoiced.

Standard Freight Charges for Deliverieswithin GermanyDelivery of all JORDAHL products with a net value star-ting from € 2,000,00 are carriage free.

■ Parcel service (max. 30 kg): € 12,00 ■ Shipping items (< € 1,000,00 net contract value) € 90,00

■ Shipping items (> € 1,000,00 up to€ 2,000,00 net contract value) € 50,00

■ Fixed-date/express shipments: priced on a time and materials basis

■ Long and oversized shipments: priced on a time and materials basis

NoteWhen using our materials, please observe the installati-on instructions or the relevant notes on how to use them in our catalogues.

Information at www.jordahl.de. Queries/orders on +49 30 68283-433 and/or [email protected].


Advice

The JORDAHL ExpertsYou are always well advised when you choose JORDAHLproducts. Whether from the point of view of static calcu-lations, general technical advice/service or the develop-ment of customised solutions – the product specialists at our Development and Service Centre in Berlin always set a high standard. Our professional and experienced employees are always up-to-date with the latest devel-opments and can off er you state-of-the-art, fl exible and customised solutions for all your needs.To contact a JORDAHL expert, simply send an e-mail to [email protected] or call +49 30 68283-433

Throughout GermanyWith sites throughout Germany, we are never far away. If you are interested in our products, simply get in touch with our sales company J&P-Bautechnik Vertriebs GmbH

To fi nd a contact person in your area, go to www.jp-bautechnik.de

Throughout Europe and Around the WorldJORDAHL products have proven themselves in use around the world because German quality standards are in demand everywhere. We can also guarantee perfect delivery of our products thanks to our reliable logistics partners and a perfectly functioning logistics chain (certifi ed in accordance with DIN EN ISO 9001), because personalised, high-quality, customer-focused service is essential to us when it comes to delivery, too.





Terms of Delivery and PaymentThe General Terms and Conditions of Business in their latest version always apply. The following Terms of Delivery and Payment are an integral part of all the vendor‘s supply contracts. If the purchaser has any conditions of purchase, these do not form part of the contract. The conditions also apply to any follow-up business, even if it has not been explicitly agreed that they should apply. Section 1: Subject of the Contract a) Our proposals, plans, drawings and sketches are subject to alteration. Any

settlements or other agreements are not binding unless confirmed in writing by us.

b) We are not bound by any errors made in quotations, invoices etc. - especially typing errors - and we are not obliged to provide compensation. This does not affect our liability for intent or gross negligence.

c) Any proposals, plans, drawings and samples or other material subject to co-pyright must not be made available to third parties, and the vendor retains the ownership and proprietary rights.

Section 2: Prices and Terms of Payment a) Our prices are ex works in Berlin or from the distribution centre, exclusive of

packaging. VAT at the legal rate will be added to these prices. The final price is determined by prices on the date of delivery. Where the invoiced amount is less than €150, we charge a small quantity surcharge of €25.

b) We give a 2 % discount for payment within 14 days of the date of invoice, with the date of payment being the date on which the payment arrives in the vendor‘s account. Where we accept bills of exchange or cheques, this is sub-ject to their safe receipt, minus expenses, and with the value date being that on which the remittance becomes available to us. In the case of payment by cheque or bill of exchange, the reservation of ownership described in Sec-tion 3 does not expire until the cheque or bill of exchange is finally cashed on the due date.

c) In the event of delayed payment, the vendor is entitled to charge the legal rate of interest on arrears or at least 9 % p.a. This does not affect the right to prove differing losses - if the legal rate of interest is not being applied.

If the purchaser is in arrears with one payment, then all the vendor‘s claims, including those deferred or not yet due, become due immediately.

This also applies where a payment is stopped or where an application has been made to open bankruptcy proceedings. In the event of delayed pay-ment, the vendor is entitled to make future deliveries dependent on sett-lement of the outstanding claims. If payment is delayed, any reductions or discounts that were given no longer apply.

d) If the purchaser fails to comply with the terms of payment, we are entitled, in addition to all our other rights, to forbid the selling on or processing of the goods that have been delivered, and to demand that they be returned or that the possession in law of the delivered goods be transferred at the purchaser‘s expense, and to cancel the authorisation to collect payment as described in Section 3e. The purchaser hereby agrees to the delivered goods being taken away in such cases.

e) We are entitled to claim the usual type and scope of securities for our claims, even where these are conditional or limited in time.

f) Where the goods are sold in a different currency, the purchaser bears the exchange rate risk from the time when the contract is signed.

Section 3: Reservation of Ownership a) The delivered goods remain the property of the vendor until completion of

full payment of the purchase price and of any other, including subsequent, claims arising and due to the vendor from the purchaser as a result of this business relationship.

b) The purchaser is only entitled and authorised to process or sell on goods subject to retention of title in the proper course of business and only on con-dition that the provisions under letters c) and d) are observed. The purchaser is not entitled to use the goods subject to retention of title in any other way, or the claims which he has assigned or has to assign to the vendor under letter d).

c) If the delivered goods are processed by the purchaser to make a new product, then the further processing shall be on the vendor‘s behalf. The purchaser is not entitled to acquire ownership under Section 950 BGB (Ger-man Civil Code). If the product is processed with other goods not belonging to the vendor, then the vendor acquires co-ownership of the new product in proportion to its value. The new product is regarded as an article subject to retention of title.

d) The purchaser hereby assigns to the vendor his claims arising from any on-ward sale of the goods subject to retention of title, up to the sum correspon-ding to the value of the goods subject to retention of title. The value of the goods subject to retention of title, for the purpose of these provisions, is the value on the vendor‘s invoice plus a security charge of 20 %.

e) The vendor authorises the purchaser to collect claims arising from the on-ward sale, retaining the right to revoke this authorisation. The vendor will not make use of their own authorisation to collect, provided that the purchaser meets his payment obligations. On request, the purchaser must give the vendor the names of the debtors for the assigned claims and tell the latter that the claim has been assigned. The vendor is hereby authorised to notify the debtors of the assignment process on behalf of the purchaser.

f) If the value of the securities given to the vendor exceeds the claims by more than 20 %, then the vendor is obliged, at the request of the purchaser, to reassign or release them, at his discretion.

g) The purchaser must inform the vendor promptly of any enforcement procee-dings or other measures by third parties which could have a detrimental eff

ect on the vendor‘s rights over the goods subject to retention of title or to assigned claims, in law or in fact, and hand over the materials that are ne-cessary for an intervention. In the event of any attachment or other seizure, the purchaser is obliged to point out the vendor‘s ownership of the goods to the enforcement officers and to notify the vendor within three days, by sending a copy of the record of attachment. The purchaser bears the costs of defending the vendor‘s rights of ownership.

h) The provisions of these paragraphs apply equally if the purchaser dispo-ses of the goods not by a sale but under a service contract or a contract for works, labour and materials.

Section 4: Delivery Times, Delivery Deadlines a) Delivery times start from the date of our order confirmation. They are non-

binding and are subject to the vendor himself being supplied correctly and on time. Other conditions apply only if the vendor guarantees binding de-livery times in writing. The time and date of delivery is regarded as being the time at which the goods are dispatched from the factory or distribution centre.

b) Delivery times and deadlines shall be extended - regardless of our other rights arising from arrears - by the length of time for which the purchaser is in arrears with payment to us.

c) Our compliance with delivery times presupposes that our working processes are uninterrupted and that our systems of dispatch and delivery are unim-peded. Incidences of force majeure, strikes, traffic disruption, shortages of transportation, heating oil, raw or auxiliary materials or operational stop-pages of any kind at our own works or at works connected with fulfilling the terms of the contract, or problems caused by official decrees which make delivery difficult exempt the vendor from meeting his delivery obligations for as long as they take effect, without the purchaser being entitled to withdraw from the contract.

d) If we fall into arrears, then the purchaser may, following the expiry of a suitable period of grace which they grant us, withdraw from the contract if we have not reported that the goods are ready for dispatch by the end of that period.

Section 5: Dispatch and Transfer of Risk a) Goods reported as being ready for dispatch must be requested promptly. b) Goods are delivered on a freight collect basis from the factory in Berlin or the

distribution centre, unless agreed otherwise. Packaging costs will be char-ged for. Delivery by post will be solely as a parcel or with postage paid, and postage costs will be charged to the purchaser.

c) Once the goods are handed over to the carrier or transport company, or at the latest when they leave the factory or warehouse, the risk transfers to the purchaser.

Section 6: Faults a) Whether the goods are in the condition required by the contract is determi-

ned at the time at which they leave the factory or warehouse. b) We must be notified promptly in writing of any defects, and any further pro-

cessing must cease immediately, certainly no later than within five days of receipt of the goods.

c) If the goods are faulty, the vendor complies with the guarantee by rectify-ing these faults free of charge and/or supplying a free replacement, at his discretion (to remedy the defect). Provided that the vendor fulfills their obligations to remedy the defect, the purchaser does not have the right to demand any reduction in the payment or cancellation of the contract, unless the attempted remedy fails.

d) In the event of any breach of obligations for which the vendor is responsible, claims for compensation, whether contractual or non-contractual, can only be made where there was intent or gross negligence. This does not apply where there is injury to life and limb or health, provided the purchaser is not a corporate entity.

Section 7: Place of Performance / Place of Jurisdiction / Right of Off Set a) The place of performance and place of jurisdiction for both contracting par-

ties is the headquarters of JORDAHL GmbH (Berlin), provided the purchaser is a registered trader.

b) The purchaser‘s right to offset claims with counter-claims is only permissible in the case of legally confirmed or undisputed claims.

Section 8: Miscellaneous a) Excess quantities The purchaser is obliged to accept any excess quantity of goods up to 10 %

of any particular item, at the contractual price. b) Part-deliveries We are entitled to make part-deliveries. This does not affect the price. Each

partdelivery is regarded as a separate transaction. c) Application of German law All legal relationships between ourselves and the purchaser are governed

exclusively by German law. UN Sales Law cannot be applied. d) Written form There are no verbal side agreements. All agreements made in the context of

this business relationship must be made in writing. The same applies to the waiver of the requirement for written form.

e) Partial ineffectiveness If certain provisions of these terms and conditions of delivery and payment

are wholly or partially ineffective, this does not affect the effectiveness of the remaining provisions. The ineffective provision should be replaced by one coming closest to its intended economic purpose.

October 2012


Index

A Additional Component 41 Adjustment Foot 41Anchor Channels JTA, JXA, JZA 4 – 10Angled Bracket JW 36Angled Support Brackets L-DN / L-DF / L-F+ 40Assembly Aid JDA-Q 32Attic Brick Anchor JAV 41

BT-bolts JA, JB, JE, JC, JH, JD, JG 16 – 20Bracket Bolt 42Brick Tie Anchors 30, 31Brickwork Support Brackets and Accessories 36 – 43

CCavity Wall Ties 43Channel Nuts JAM 24Channel Pricing 11Clamp Connections JSV 28Clamping Claw and Adaptor SKU 27Clamping Plates 27Clamping Plate (U-plate), Insulation Retainer 43Curved Anchor Channels JTA, JXA, JM, JXM 15Compensating Bracket 42Coupling Sleeve Round 25

DDouble-Notch Toothed T-bolts JKB, JKC 23Double Shear Connector JDSD/JDSDQ 34, 35Dowels 43

EEdge Protection Angle JKW 14End Anchors for Anchor Channels 27End Anchor for Profi led Metal Sheet Channels JTB-EA, JTB-EB 12Eyelet Sockets ÖM 28

FFire Protection Collar JBRM, JBRMQ 34, 35Frame Shoe JG 29

GGrout-in Brackets JMK+ 41

HHammer-head Locking Plates 24Hexagonal Coupling Sleeves 25Hexagon Bolts 25Hook-head Locking Plates 24

IISO-Clip 43

LLocking Plates JGM 24Loop Channels JSA 10

MMounting and Framing Channels JM, JXM, JML, JZML 15, 44 – 47

NNotch Toothed Bolts JKZS 24

PPrefabricated Part Holder JFT 39Pressure Bolts JDS 28Profi le-Brackets JK 14Profi led Metal Sheel Channels JTB 12Punching Shear Reinforcement JDA 32, 33

RRailing Fastening JGB 13Ring Bolt / Frame Eyelet FIG 42Ring Nuts RM 28

SScaff old Anchor JGA+Q, JGA+Z 42Self Locking Nut with Toothed Bearing 25Shear Reinforcement JDA-S 32, 33Sliding Sleeve 30Spacers AH-DA, FBA, AH-FT 33Spring Washer 25Stainless Steel Wire ESD 38Suspension Loop JRH 38

TThin-Bed Brick Tie Anchors JMA-D 30Threaded Loop JGS 39Threaded Rods GS 28Timber Fixing Strap JNA 31Toothed T-bolts JXB, JXD, JXH, JZS, JXE, JKC 21 – 23 Toothed Channels JXA, JXA-PC, JZA 8, 10Toothed Straps JVB-Z, -ZS, -FTE, -FTQ 26 – 27Turnbuckles SP 28

WWasher 25Water Barrier Disc 43Wedge Adjuster 43




LIT-

PL20

14-E

N /

1. /

01-

2014

JORDAHL GmbHNobelstr. 5112057 Berlin

GermanyTel + 49 30 68283-02

Fax + 49 30 [email protected]

New Price List 2014. Quality is always a good decision. · 2014. 1. 17. · anchored in quality...

Documents

Transcript of New Price List 2014. Quality is always a good decision. · 2014. 1. 17. · anchored in quality...