New Innovation In Safety Gloves
2
SEAMLESS ASSORTMENT 13-3 COOL SupraCoat 13-4 General Latex 13-3 Cool SupraCoat 13-4 General Nitrile 13-4 General SupraCoat 15-1 Assembly SupraCoat 13-4 General Light SupraCoat 13-3 Heat Nitrile 13-5 SuperCool SupraCoat 13-6 Heat Nitrile 13-4 Heat FR/FR-AF 15-1 Assembly Nitrile 15-1 Assembly Nitrile 2/Nitrile 2 Full VERY OILY OILY & DIRTY SUPER CLEAN & SPECIAL ALLROUND DRY& WET GRIP VERY HIGH RISK HIGH RISK LOW RISK MEDIUM RISK 15-4 Heat Light Nitrile 13-1 Food 18-3 Cool SupraCoat 13-2 Assembly Pro SupraCoat 10-5 Food 10-5 Food Lint Free 1310-3 Food Hot 13-4 General Light Nitrile 2 13-1 Clean Assembly Designed for clean touch with the lowest environmental impact 13-2 Assembly Pro SupraCoat Designed for high dexterity and basic cut resistance 13-3 Cool SupraCoat Designed for cut protection at room temperature 18-3 Cool SupraCoat Ultra thin cut resistant glove 15-1 Assembly SupraCoat Designed for precision handling • Silicon, latex and fingerprint free • Pure waterborne PU • 100 % recycled undyed polyester • Liner only 0,8 mm ART. NO: 13-1CA 5 dozen/carton Size 7–11 • SupraCoat advanced waterbased PU/Nitrile foam • Excellent breathing • “Micro cup” textured for improved grip • Thin glove with extra fine kniƫng and elasƟc close fit ART. NO: 15-1ASCG 5 dozen/carton Size 7–11 CLEAN TOUCH SUPRACOAT CLEAN OILGRIP NITRILE ALLROUND GRIP SUPRACOAT CAT II CAT II EN 388 EN 388 3121 4131 • SupraCoat advanced waterbased PU/Nitrile foam • Thin glove with fine kniƫng and elasƟc close fit ART. NO: 15-1APSC 5 dozen/carton Size 7–11 • HPPE and SupraBlock Cut provide cut level 3 • HPPE acƟvely transport heat from your hand • SupraCoat advanced waterbased PU/Nitrile foam • ”Micro cup” textured for improved grip ART. NO: 13-3CSC 5 dozen/carton Size 7–11 • Very thin glove 0.6 mm • Spun Cutrol HPPE • HPPE acƟvely transport heat from your hand • SupraCoat advanced waterbased PU/Nitrile foam • AcƟve moisture transportaƟon from inside to outside of glove ART. NO: 18-3CSC 5 dozen/carton Size 7–11 13-4 General Light SupraCoat Designed for high dexterity and moderate cut resistance 13-4 General SupraCoat General purpose glove with high cut resistance 13-5 SuperCool SupraCoat Designed for highest cut resistance 13-4 General Nitrile Designed for general purpose cut resistance 15-1 Assembly Nitrile Designed for precision handling in oily or dirty environments CAT II CAT II EN 388 EN 388 4542 4131 • SupraCoat advanced waterbased PU/Nitrile foam • Fibreglass and SupraBlockCut provides cut level 5 • ”Micro cup” textured for improved grip ART. NO: 13-4GLSC 5 dozen/carton Size 7–11 • SupraCoat advanced waterbased PU/Nitrile foam • Fibreglass and SupraBlockCut provides cut level 5 (ISO 13997 ~ 28N) • ”Micro cup” textured for improved grip ART. NO: 13-4GSC 5 dozen/carton Size 7–11 • High quality Nitrile foam coaƟng • Strongly oil and water repellant • Thin glove with extra fine kniƫng and elasƟc close fit • ”Micro cup” textured for improved grip ART. NO: 15-1ANI 5 dozen/carton Size 7–11 • High quality Nitrile coaƟng • ”Micro cup” textured for improved grip • Fibreglass and SupraBlock Cut provides cut level 5 ART. NO: 13-4GNI 5 dozen/carton Size 7–12 CAT II 4242 EN 388 ISO 13997 7N CAT II 4342 EN 388 ISO 13997 8N CAT II 4542 EN 388 ISO 13997 28N CAT II 4544 EN 388 ISO 13997 41N Safe grip in oily conditions with different levels of protection The ultimate foam coating Smallest environmental footprint, fingerprint safe and skin friendly waterborne PU • SupraCoat advanced waterbased PU/Nitrile foam • ”Micro cup” textured for improved grip • High quality HPPE steel and fibreglass providing cut level 5 ART. NO: 13-5SSC 5 dozen/carton Size 7–11 ANSI CUT LEVEL 2 ANSI CUT LEVEL 2 ANSI CUT LEVEL 4 ANSI CUT LEVEL 5 NITRILE 2 Best barrier & grip in oily environment CAT II EN 388 4132 15-1 Assembly Nitrile 2 Designed for precision handling in very oily and dirty environments • 2 layer coaƟng, thin solid Nitrile and Nitrile foam • Oil and waterproof • Thin glove with extra fine kniƫng and elasƟc close fit • ”Micro cup” textured for improved grip • Available in full coaƟng as style 15-1ANI2FULL ART. NO: 15-1ANI2 5 dozen/carton Size 7–11 15-1 Assembly Nitrile 2 Full (15-1ANI2FULL) EN388 - 4132, CE Cat 2 13-4 General Light Nitrile 2 Designed for high cut resistance in very oily and dirty environments CAT II EN 388 4542 • 2 layer coaƟng, thin solid Nitrile and Nitrile foam • Oil and waterproof • Fibreglass and SupraBlockCut provides cut level 5 • ”Micro cup” textured for improved grip ART. NO: 13-4GLNI2 5 dozen/carton Size 7–11 CAT II 4542 EN 388 ISO 13997 23N CAT II 3443 EN 388 ISO 13997 10N ANSI CUT LEVEL 3
-
Upload
michael-cash -
Category
Business
-
view
31 -
download
1
Transcript of New Innovation In Safety Gloves
SEAMLESS ASSORTMENT
13-3 COOL
SupraCoat
13-4 General
Latex
13-3 Cool
SupraCoat
13-4 General
Nitrile
13-4 General
SupraCoat15-1 Assembly
SupraCoat13-4 General Light
SupraCoat
13-3 Heat
Nitrile
13-5 SuperCool
SupraCoat
13-6 Heat
Nitrile13-4 Heat
FR/FR-AF15-1 Assembly
Nitrile
15-1 Assembly
Nitrile 2/Nitrile 2 Full
VERY OILY
OILY &
DIRTY
SUPER
CLEAN &
SPECIAL
ALLROUND
DRY&
WET GRIP
VERY HIGH
RISK
HIGH RISKLOW RISK MEDIUM RISK
15-4 Heat
Light Nitrile
13-1 Food
18-3 Cool
SupraCoat
13-2 Assembly Pro
SupraCoat
10-5 Food
10-5 Food
Lint Free
1310-3 Food Hot
13-4 General Light
Nitrile 2
13-1 Clean AssemblyDesigned for clean touch with the lowest environmental impact
13-2 Assembly Pro SupraCoatDesigned for high dexterity and basic cut resistance
13-3 Cool SupraCoatDesigned for cut protection at room temperature
18-3 Cool SupraCoatUltra thin cut resistant glove
15-1 Assembly SupraCoatDesigned for precision handling
• Silicon, latex and fi ngerprint free• Pure waterborne PU• 100 % recycled undyed polyester• Liner only 0,8 mm ART. NO: 13-1CA 5 dozen/carton Size 7–11
• SupraCoat advanced waterbased PU/Nitrile foam• Excellent breathing• “Micro cup” textured for improved grip• Thin glove with extra fi ne kni ng and elas c
close fi t ART. NO: 15-1ASCG 5 dozen/carton Size 7–11
CLEAN TOUCHSUPRACOAT CLEAN
OILGRIPNITRILE
ALLROUND GRIPSUPRACOAT
CAT II
CAT II
EN 388
EN 388
3121
4131
• SupraCoat advanced waterbased PU/Nitrile foam• Thin glove with fi ne kni ng and elas c close fi t ART. NO: 15-1APSC 5 dozen/carton Size 7–11
• HPPE and SupraBlock Cut provide cut level 3• HPPE ac vely transport heat from your hand• SupraCoat advanced waterbased PU/Nitrile foam• ”Micro cup” textured for improved grip ART. NO: 13-3CSC 5 dozen/carton Size 7–11
• Very thin glove 0.6 mm• Spun Cutrol HPPE• HPPE ac vely transport heat from your hand• SupraCoat advanced waterbased PU/Nitrile foam• Ac ve moisture transporta on from inside to
outside of glove ART. NO: 18-3CSC 5 dozen/carton Size 7–11
13-4 General Light SupraCoatDesigned for high dexterity and moderate cut resistance
13-4 General SupraCoatGeneral purpose glove with high cut resistance
13-5 SuperCool SupraCoatDesigned for highest cut resistance
13-4 General NitrileDesigned for general purpose cut resistance
15-1 Assembly NitrileDesigned for precision handling in oily or dirty environments
CAT II
CAT II
EN 388
EN 388
4542
4131
• SupraCoat advanced waterbased PU/Nitrile foam• Fibreglass and SupraBlockCut provides cut level 5• ”Micro cup” textured for improved grip
ART. NO: 13-4GLSC 5 dozen/carton Size 7–11
• SupraCoat advanced waterbased PU/Nitrile foam• Fibreglass and SupraBlockCut provides cut level 5 (ISO 13997 ~ 28N)• ”Micro cup” textured for improved grip ART. NO: 13-4GSC 5 dozen/carton Size 7–11
• High quality Nitrile foam coa ng• Strongly oil and water repellant• Thin glove with extra fi ne kni ng and elas c
close fi t• ”Micro cup” textured for improved grip ART. NO: 15-1ANI 5 dozen/carton Size 7–11
• High quality Nitrile coa ng• ”Micro cup” textured for improved grip• Fibreglass and SupraBlock Cut provides
cut level 5 ART. NO: 13-4GNI 5 dozen/carton Size 7–12
CAT II4242
EN 388 ISO 13997
7N
CAT II4342
EN 388 ISO 13997
8N
CAT II4542
EN 388 ISO 13997
28N
CAT II4544
EN 388 ISO 13997
41N
Safe grip in oily conditions with different levels of protection
The ultimate foam coating
Smallest environmental footprint, fi ngerprint safe and skin friendly waterborne PU
• SupraCoat advanced waterbased PU/Nitrile foam• ”Micro cup” textured for improved grip• High quality HPPE steel and fi breglass providing cut level 5 ART. NO: 13-5SSC 5 dozen/carton Size 7–11
ANSICUT LEVEL
2
ANSICUT LEVEL
2
ANSICUT LEVEL
4
ANSICUT LEVEL
5
NITRILE 2Best barrier & grip in oily environment
CAT II
EN 388
4132
15-1 Assembly Nitrile 2Designed for precision handling in very oily and dirty environments
• 2 layer coa ng, thin solid Nitrile and Nitrile foam• Oil and waterproof• Thin glove with extra fi ne kni ng and elas c
close fi t• ”Micro cup” textured for improved grip• Available in full coa ng as style 15-1ANI2FULL ART. NO: 15-1ANI2 5 dozen/carton Size 7–11
15-1 Assembly Nitrile 2 Full (15-1ANI2FULL)EN388 - 4132, CE Cat 2
13-4 General Light Nitrile 2Designed for high cut resistance in very oily and dirty environments
CAT II
EN 388
4542
• 2 layer coa ng, thin solid Nitrile and Nitrile foam• Oil and waterproof• Fibreglass and SupraBlockCut provides cut level 5• ”Micro cup” textured for improved grip ART. NO: 13-4GLNI2 5 dozen/carton Size 7–11
CAT II4542
EN 388 ISO 13997
23N
CAT II3443
EN 388 ISO 13997
10NANSI
CUT LEVEL
3
www.eurekasafety.se
Seam
less
eure
kasa
fety
ver
sion
150
13-4 Heat FRDesigned for arc fl ash, fl ame retardant and cut resistance
13-4 Heat FR-AFHigh arc fl ash protection, high cut pro-tection and inherently fi re resistant
• High quality Nitrile fl ame retardant coa ng• Arc fl ash cer fi ed according to ASTM F2675.
ATPV 5,5 Cal/cm2• Oil and water repellent• EN 407, heat resistant to contact heat 100˚C• ANSI cut level 4 ART. NO: 13-4HFR 5 dozen/carton Size 7–11
• High quality Nitrile fl ame retardant coa ng• Arc fl ash cer fi ed according to ASTM F2675. ATPV 5,5 Cal/cm2• Oil and water repellent• EN 407, heat resistant to contact heat 100˚C• ANSI cut level 4• Inner lining in back of hand is Arc Flash cer fi ed
according to ASTM F1959. ATPV 9 Cal/cm2 ART. NO: 13-4HFR-AF 5 dozen/carton Size 7–11
413100
413100
EN 407
EN 407
Outer materialArc FlashASTM F2675ATPV=5,5 Cal/cm2
LiningASTM F1959ATPV=9 Cal/cm2
Arc FlashASTM F2675ATPV=5,5 Cal/cm2
CAT II
CAT II
3544
EN 388
3544
EN 388
10-5 FoodDesigned for the food industry
• Cer fi ed as food safe• HPPE Steel and fi breglass provide cut level 5• Washable at 70˚C• Blue colour for easy iden fi ca on• Good grip ART. NO: 10-5FOOD 5 dozen/carton Size 7–11
454X
EN 388
WETGRIPLATEX
FOOD
Natural Latex and breathable back – the perfect wet grip combination
Gloves designed for the food industry
13-4 General LatexDesigned for high cut resistance
• High quality natural Latex• Wrinkle fi nish on coa ng for improved grip• Fibreglass and SupraBlockCut provides cut level 5 (ISO 13997 ~ 25N) ART. NO: 13-4GLA 5 dozen/carton Size 7–11
3542
EN 388 ISO 13997
25NCAT II
CAT II
Durable and infl ammableANSI
CUT LEVEL
4
ANSICUT LEVEL
4
ANSICUT LEVEL
4
10-5 FOOD Lint free
FR
15-4 Heat Light NFRDesigned for dexterity, cut and medium fi re resistance
• High quality Nitrile composite foam• Para-aramid liner provides cut resistance and
basic FR proper es• Reduced fl ammability• An sta c / Dissipa ve tex le• Suitable for metal working industry ART. NO: 15-4HLNFR 5 dozen/carton Size 7–11
41XXXX
EN 407
CAT II3532
EN 388
COMPANYY.Berger & Co ABTel: +46 31 49 09 40Fax: +46 31 45 64 40Address:Ingela Gathenhielms gata 3, SE-421 30 Västra Frölunda, Sweden
CONTACTFor more informa on please contact:Eureka offi ceTel: +46 31 75 10 850 E-mail: [email protected]
Per Stoltz – Sales ScandinaviaTel: +46 707 69 64 80E-mail: [email protected] Vierstraete – Sales Europe and AmericasTel: +46 31 758 99 05, +46 733 25 36 01E-mail: [email protected] Berger – Sales Rest of the WorldTel: +46 31 758 99 00E-mail: [email protected]
13-3 Heat NFRDesigned for contact heat, cut and medium fi re reistance
• High quality Nitrile composite foam• Oil and water repellent• Suitable for metal working industry• Brushed Para-aramid liner for improved
insula on• EN407, heat resistance to contact heat (100 C)• An sta c / Dissipa ve tex le ART. NO: 13-3HNI 5 dozen/carton Size 7–11
EN 388
3442CAT II
EN 407
FIRE RESISTANTFRNFRDurable and medium fi re resistance
1310-3 FOOD Hot 13-1 FOOD3 0 3 OO
41XXXX
![[PPT]Respirator Standard Photos - SAFETY ENGINEERING | · Web viewAluminized Gloves 10. Aramid Fiber Gloves چه نوع دستکش های ایمنی وجود دارد؟ دستکش](https://static.fdocuments.in/doc/165x107/5aa28a3b7f8b9a07758d23cf/pptrespirator-standard-photos-safety-engineering-viewaluminized-gloves.jpg)
