New Hangar and Storage Shed Design at Burlington International Airport

Senior Capstone Design Project Civil and Environmental Engineering

University of Vermont

Erin Flynn and Phillip Peterson Presenting

OverviewWorking with Heather Kendrew and Robert McEwing at the Burlington Airport as part of service-learning project.

TeamsTeam 1: Site preparation, demolition/deconstruction of existing buildings

Team 2: Equipment and chemical storage facility layout and design

Team 3: New Hangar layout and design

Site Overview

Pavement Removal

Slab Removal

Silt Fences and

Erosion Control

Team 1: SITE PREPARATION

Demolition

-Existing Conditions

-Salvage and Recycling

of Building Materials

-Demolition Procedure

-Demolition Costs

-Demolition Permits

Team 2:Storage Facility

Existing Building 870

Site Plan & Building Layout

Existing structures and utilities, overlay (shaded area) of the proposed storage facility

Interior layout of proposed storage facility

Radiant Floor Heating System

Team 3 Hangar Design

Existing hangar – 40,000 sqft

New Hangar

70,000 sqft

Structural Design

Structural Design

Sliding Hangar Door No part of the door

weight is supported by the building frame

Door is carried by ASCE certified Crane Rails

Door is guided by top rollers that travel on overhead guides

Can be customized to almost any size

Building Layout

Oil-water separatorDrainage

Water Main

Summary

Storage Shed and New Hangar Design•Storage Shed Pre-Fab•Hangar Original Design