Never jams! for a button! -...
Transcript of Never jams! for a button! -...
Never
jams!
No need
for a
disengage
button!
360° rotation angle
Optionally with swivelling hose connection
Including handhold
The quick lock device allows quick and simple change of inserts
Powerful!Thanks to its outstanding speed, precision, ergonomics and safety, this hydraulic square drive tool sets standards in almost every bolting situation.
Internationally patentented technology
The MX-EC/MSX is preferred by users for its reliable and practical design. You will not find a disengage lever or button - none is needed. Our hydraulic bolting tools do not jam.
Perfected!
lLong-life Plarad quality
lHigh bolting speeds thanks to optimum harmonization with Plarad power packs
lTorque range 200 – 65,000 Nm
lOperating pressure up to 800 bar (11,600 psi)
lAutomatically opening and closing pressure safety valve
lSQS high-pressure safety cylinder ➥ very service friendly ➥ high safety
lVery small dimensions thanks to spherical drive system
lFine spline ratchet system ➥ high torque precision ➥ no jamming
lAlso available as ATEX version (II 2 G c II B T4) for Zone 1G
Also available in single hose version for
even better handling
Safety Ratchet – prevents
unintended unlocking
of the reaction arm
Extremely slimline, lightweight and high-strength aluminium housing
SQS safety cylinder of high-strength material allows high pressures
in a lightweight casing with no risk of casing fracture
Long-life fine spline ratchet system. A full stroke is not essential
The spherical connection between lever and ratchet guarantees optimum transfer of the generated torque
Spherical bearing lever piston system – in case of a loosening shock, the piston separates from the lever and reconnects auto- matically. There is no connection at risk of breakage
Integrated release shock absorber protects the housing from loosening shock damage
Automatic pressure safety
valve
Continuous rotation in
every stroke position!
No jamming!
Adjustable!
The reaction arm can be quickly and easily rotated by 360°. The safety latch reliably prevents inadvertent un-locking.
Type Sqare- Torque- drive range (Nm) MX-EC 20 TS 1“ and 3/4“ 210 - 2,100
MX-EC 45 TS 1“ 450 - 4,500
MX-EC 75 TS 11/2“ 750 - 7,500
MX-EC 95 TS 11/2“ 950 - 9,500
MX-EC 120 TS 11/2“ 1.200 - 12,000
MX-EC 155 TS 11/2“ 1.550 - 15,500
MX-EC 200 TS 2 1/2“ 2.000 - 20,000
MSX 250 TS 2 1/2“ 2.500 - 25,000
MSX 400 TS 2 1/2“ 4.000 - 40,000
MSX 650 TS 3 1/2“ 6.500 - 65,000
A comprehensive range of accessories allows a large number of different applications.
Reduce of height and weight by use of one- piece safety sockets
Direct drive hex inserts in a variety of sizes
Standard square drive sockets are available in all dimensions and wrench sizes.
Long socket
Double hexagonal socket
This document or parts thereof may only be reproduced or copied if prior written authorisation has been obtained. We reserve the right to make alterations. We accept no responsibility forprinting errors or incorrect content. Status: 11/2010 · EK 10387 - 100 E
Maschinenfabrik Wagner GmbH & Co. KGBirrenbachshöhe • D-53804 Much • Germany
Phone (national): (02245) 62 – 0Fax (national): (02245) 62 – 66
E-mail: [email protected]: http://www.plarad.com
Phone (international): +49 (0)2245 62 – 10Fax (international): +49 (0)2245 62 – 22