NetApp FC LUN Allocation on Windows Server
-
Upload
majumdersubhrajit -
Category
Documents
-
view
225 -
download
0
Transcript of NetApp FC LUN Allocation on Windows Server
-
7/27/2019 NetApp FC LUN Allocation on Windows Server
1/11
NetApp FC LUN Allocation on Windows Server
PURPOSE
The purpose of this document is to provide guidance and training on LUN assigning to awindows environment using NetApp technologies
Hardware Setup
NetApp FAS 960 (1 Nos), Brocade 200E switch (1 Nos), Windows 2003 Server with EmulexHBA installed
Connectivity Diagram
PrerequisitesStorage Configuration Prerequisites
FCP License should be added
FCP Service should be started
Management IP should be configured for accessing the filer view
Login credential should be available for accessing the filer view
http://3.bp.blogspot.com/-w_PsKoBKfUg/T_PrVBKFE9I/AAAAAAAAAOo/hQvZoQd1kuA/s1600/Fc+1.JPG -
7/27/2019 NetApp FC LUN Allocation on Windows Server
2/11
HTTPD options should be ON for accessing the filer view.
Host HBA WWPNs should be available before creating Igroup.
1.2 Server Configuration Prerequisites
Windows server with HBA installed
HBAnyware utility (for Emulex HBAs) should be installed.
NetApp DSM should be installed in case of multipathing (Not applicable in this scenario)
Windows credentials for logging in
Brocade switch Configuration Prerequisites Cable connectivity to the storage should be proper
Cable connectivity to the host should be proper
Zoning should be proper
Note down the Host and Storage WWPNs before creating zone.
Switch credentials for loging in
PROCEDURE
FINDING WWPN OF HOST HBA
1. Login to the windows server, Open the HBAnyware utility,
-
7/27/2019 NetApp FC LUN Allocation on Windows Server
3/11
2. Note down the WWPNs of the host HBAs
3. Open the Brocade Switch console4. Select port admin in switch console window, then below console will open,5. Select every port in the left side and click Devices details,
http://1.bp.blogspot.com/-4e47IKCev7g/T_QEUbHjaFI/AAAAAAAAAP0/dVWzW7H0xQQ/s1600/fc3.JPGhttp://3.bp.blogspot.com/-cwkwvkA_TkI/T_QETJ-WyDI/AAAAAAAAAPw/d6_mD0Hq_G0/s1600/fc2.JPGhttp://1.bp.blogspot.com/-4e47IKCev7g/T_QEUbHjaFI/AAAAAAAAAP0/dVWzW7H0xQQ/s1600/fc3.JPGhttp://3.bp.blogspot.com/-cwkwvkA_TkI/T_QETJ-WyDI/AAAAAAAAAPw/d6_mD0Hq_G0/s1600/fc2.JPG -
7/27/2019 NetApp FC LUN Allocation on Windows Server
4/11
6. In which port you find the same server wwpn number means that port is connected in theserver
http://3.bp.blogspot.com/-U9r5BJgxD2c/T_QEVM0H9-I/AAAAAAAAAP8/duMQt0d9j0k/s1600/fc4.JPG -
7/27/2019 NetApp FC LUN Allocation on Windows Server
5/11
7. In which port you find the Netapp filer wwpn number means that port is connected in the
Filer,
http://2.bp.blogspot.com/-LYe_B8QFass/T_QEV7SDZfI/AAAAAAAAAQE/4lr4O1D6jrw/s1600/fc5.JPG -
7/27/2019 NetApp FC LUN Allocation on Windows Server
6/11
8. Now port 3 and port 10 is connected in the switch, next we need to do Zoning for the twoports,
http://1.bp.blogspot.com/-3PJMVzMGOqY/T_QEW6bPTOI/AAAAAAAAAQQ/FrKk-xeiIRk/s1600/fc6.JPG -
7/27/2019 NetApp FC LUN Allocation on Windows Server
7/11
9. Click on Zone Admin tab, the below tab will open,10. Select the zone tab on the new window,11. Click on new zone and name the new zone(Zone_C_WINDOWS).
http://4.bp.blogspot.com/-TXGQpwx6Ewo/T_QEXusJGiI/AAAAAAAAAQU/FpACc0d0Vqg/s1600/fc7.JPG -
7/27/2019 NetApp FC LUN Allocation on Windows Server
8/11
12. After Created new zone name, select the newly created zone add the WWPNs of Hostand Storage
http://2.bp.blogspot.com/-GAMboDrNjzw/T_QEYmjY8kI/AAAAAAAAAQg/gD72T83Tje4/s1600/fc8.JPG -
7/27/2019 NetApp FC LUN Allocation on Windows Server
9/11
Adding the new zone to the switch configuration.
13. Click on Zone config tab and select the newly created zone then add to the zoneconfig.
http://2.bp.blogspot.com/-ODdgM4k_J6c/T_QEQWfNAJI/AAAAAAAAAPY/rHoZOJsCmzU/s1600/fc10.JPGhttp://2.bp.blogspot.com/-iCw4aIkqV4U/T_QLkMk2ReI/AAAAAAAAAQ0/H-0gfw0WULg/s1600/fc9.JPGhttp://2.bp.blogspot.com/-ODdgM4k_J6c/T_QEQWfNAJI/AAAAAAAAAPY/rHoZOJsCmzU/s1600/fc10.JPGhttp://2.bp.blogspot.com/-iCw4aIkqV4U/T_QLkMk2ReI/AAAAAAAAAQ0/H-0gfw0WULg/s1600/fc9.JPG -
7/27/2019 NetApp FC LUN Allocation on Windows Server
10/11
14. Select the save Config and it prompt for YES or No, Select YES
15. Select Enable Config
http://1.bp.blogspot.com/-VlmtTufLU94/T_QERRckeGI/AAAAAAAAAPg/whTPVyXg7KQ/s1600/fc11.JPG -
7/27/2019 NetApp FC LUN Allocation on Windows Server
11/11
http://4.bp.blogspot.com/-jPGgle63yMI/T_QESdIdbuI/AAAAAAAAAPo/3vpc6bzpYOw/s1600/fc12.JPG