Neoprene and Steel Friction Cefficients

Coefficient of Friction (ASTM D-1894) ’U\ :HW 0DWHULDO 39& 6WHHO /HDWKHU *ODVV /XFLWH 39& 6WHHO /HDWKHU *ODVV /XFLWH (’305XEEHU 1HRSUHQH $OFU\Q%. $OFU\Q%. $OFU\Q1& $OFU\Q%. $OFU\Q1& $OFU\Q1& 6DQWRSUHQH .UDWRQ* 5LJLG39& Data show dynamic surface friction against stainless steel, glass, and acrylic plastic under wet and dry conditions. Rubber materials such as EPDM and neoprene have high surface friction. Alcryn ® offers higher friction than other TPEs even when wet. Caution: This data is only a guide. Customers should conduct tests to determine friction characteristics for their parts because part shape, loading, and contact surface can effect results. )RUPRUHLQIRUPDWLRQRQ$OFU\Q 7ROO)UHH Advanced Polymer Alloys 3521 Silverside Road Quillen Building 2E Wilmington, DE 19810 Phone: (302) 478-8989 Fax: (302) 478-8166 Internet/World Wide Web: http://www.APAinfo.com Special Note--Except as otherwise provided by law outside the USA, the following information should be noted. The information set forth herein is furnished free of charge and is based on technical data that Advanced Polymer Alloys believes to be reliable. It is intended for use by persons having technical skill, at their own discretion and risk. The handling precaution information contained herein is given with the understanding that those using it will satisfy themselves that their particular conditions of use present no health or safety hazards. Since conditions of product use are outside our control, we make no warranties, express or implied, and assume no liability in connection with any use of this information. As with any material, evaluation of any compound under end-use conditions prior to specifications is essential. Nothing herein is to be taken as a license to operate under or a recommendation to infringe any patents.

Upload
hwdyang
Category

Documents
view
1.680
download
7

Embed Size (px):

description

manual/technical

Transcript of Neoprene and Steel Friction Cefficients

Page 1: Neoprene and Steel Friction Cefficients

Coefficient of Friction(ASTM D-1894)

'U\ :HW

0DWHULDO 39& 6WHHO /HDWKHU *ODVV /XFLWH 39& 6WHHO /HDWKHU *ODVV /XFLWH

('30�5XEEHU ��

1HRSUHQH ��

$OFU\Q��%. ��

$OFU\Q��1& ��

$OFU\Q��%. ��

$OFU\Q��1& ��

6DQWRSUHQH��

.UDWRQ�*��

5LJLG�39& ��

Data show dynamic surface friction against stainless steel, glass, and acrylic plastic under wet and dryconditions. Rubber materials such as EPDM and neoprene have high surface friction. Alcryn ® offershigher friction than other TPEs even when wet.

Caution: This data is only a guide. Customers should conduct tests to determine friction characteristics fortheir parts because part shape, loading, and contact surface can effect results.

)RU�PRUH�LQIRUPDWLRQ�RQ�$OFU\Q � 7ROO�)UHH��

Advanced Polymer Alloys3521 Silverside RoadQuillen Building 2EWilmington, DE 19810

Phone: (302) 478-8989Fax: (302) 478-8166

Internet/World Wide Web: http://www.APAinfo.com

Special Note--Except as otherwise provided by law outside the USA, the following information should be noted.

The information set forth herein is furnished free of charge and is based on technical data that Advanced Polymer Alloys believes to be reliable. It isintended for use by persons having technical skill, at their own discretion and risk. The handling precaution information contained herein is givenwith the understanding that those using it will satisfy themselves that their particular conditions of use present no health or safety hazards. Sinceconditions of product use are outside our control, we make no warranties, express or implied, and assume no liability in connection with any use ofthis information. As with any material, evaluation of any compound under end-use conditions prior to specifications is essential. Nothing herein is tobe taken as a license to operate under or a recommendation to infringe any patents.

��3ULQWHG�LQ�8�6�$�5HRUGHU�1R��&2)