NelsoN AustrAliA PriCelist 2016 · Stud Kits ..... 47 On/Off Control ... M0300SW: Bolt on Saddle...

NelsoN AustrAliAPriCelist 2016

NELSONList Price Exc GST - 1 October 2015

Tel: 1300 856 368 | Fax: 1300 856 369 | [email protected] | www.nelsonirrigation.com.au 4

3000 series Pivot ProductsR3000 & R3030: Rotator ...............................................6PC-R3000: Part Circle Rotator ........................................6S3000 & S3030: Spinner ...............................................7PC-S3000: Part Circle Spinner .......................................7A3000 & A3030: Accelerator .........................................8D3000 & D3030: Sprayhead .........................................9PC-D3000 & PC-D3030: Part Circle Sprayhead ..............9T3000: Trashbuster .....................................................10O3000 & O3030: Orbitor ...........................................11Centre Pivot Sprinkler Charting & Packaging Service .....11Pivot Pressure Regulators .............................................12Hose Barb Fittings .......................................................12HD3000 Hose Drag Adaptor for LEPA ..........................12

Pivot ProductsGalvanised Steel Goose Necks .....................................13Plastic Goose Necks & Truss Rod Hose Clips .................13Steel Drops .................................................................13Drop Hose Weights .....................................................13Drop Hose ..................................................................14Pressure Gauges .........................................................14Pressure Drop Kit for Pivot Systems ...............................14Gauge, Tee Kits & Fittings ............................................15Flexible Drop Hose: Cut to Length & Assembled ............16Boom Backs: Alumi Boom with Brace ...........................17Boom Backs: Rigid Hose Drop .....................................17Boom Backs: Hose Boom .............................................17Boom Backs: Double Hose Boom .................................17

end gun & Part Circle solutionsR55: End Gun .............................................................18R75 & R75LP: End Gun ................................................18Part Circle Impact ........................................................19Big Gun Sprinklers ......................................................19

rotatorsR5 & R5 Pop-Up ..........................................................20R10 & R10T (Turbo) .....................................................21R2000 ........................................................................22R2000WF & R2000LP (Low Pressure) ............................23R2000CW (Cow Wash) ................................................24PC-R2000WF & PC-R2000LP .......................................25

r2000 rotator AccessoriesAccessories .................................................................25

rotatorsR33 & R33LP ...............................................................26

Pressure regulators1/2" Mini Pressure Regulators & Drain Checks ..............273/4" Pressure Regulators ..............................................27

feedtube Assemblies4 mm feedtube options for R5 ......................................285 mm feedtube options for R5 & R10 ............................3010 mm feedtube options for R10-R2000WF ..................31Tools & Parts for 10 mm Assemblies .............................32FT1 Repair Parts ..........................................................33

Nursery & greenhouse sprinklersSpinner: S5 .................................................................34Feedtube Assembly for S5 (Inverted mount) ...................34Spinner: S10 ...............................................................35Spray: D10 .................................................................35Rotator: R10TG ...........................................................35

Big gun® sprinklers75 Series: Big Gun® Sprinklers .....................................37100 Series: Big Gun® Sprinklers ...................................38150 Series: Big Gun® Sprinklers ...................................39200 Series: Big Gun® Sprinklers ...................................40

impact sprinklersPart Circle Impacts & Swivel Hose Els ............................41

High Angle Impact Sprinkler ........................................413/4" & 1" Low Angle Impact Sprinkler ...........................41Vanes, Nozzles & Plugs ................................................41

800 series Control Valves2 & 3" Valve Options ...................................................424, 6 & 8" Valve Options ...............................................43

Big gun® & Valve Combos2, 3 & 4" Big Gun® Valves ............................................44Air Control Valve .........................................................44

Valve Accessories800 Series Accessories .................................................45

1000 series Control ValvesInline Valve .................................................................46Tee & Elbow Valve .......................................................46Components ...............................................................47Connections (EA) .........................................................47Stud Kits .....................................................................47On/Off Control ...........................................................47Solenoids ....................................................................48Pressure Control 2”, 323, 3” & 434 Valves ...................48Filters .........................................................................48Accessories .................................................................48Tube & Fittings ............................................................49Tube, Fittings & Mount Kits ...........................................49Spline Pipe Accessories ................................................49

tWig Wireless ControlsWireless TWIG Controller ............................................50Wireless TWIG Valve Actuator ......................................50Wireless Contact-TWIG 4 Latch Contacts ......................50Wireless TWIG Repeater ..............................................50TWIG Solar Kits ...........................................................51TWIG Mounting Bracket Kits.........................................51TWIG Antenna Kits ......................................................51Accessories .................................................................51Solenoids ....................................................................51

NelsoN

McCroMeterMcMag3000 flow Meters

McMag3000™ ..........................................................52McMag3000: Cables...................................................52McMag3000: Options & Kits ........................................52

McPropeller flow MetersM0300: Bolt On Saddle Flow Meters ............................53M0300SW: Bolt on Saddle Flow Meters ........................53M1400: Bolt on Saddle Flow Meters .............................53Quickpick McPropeller Meter Packages .........................54McPropeller Transmitters And Flow Computers ..............55McPropeller Accessories & Options ...............................56Digital Register: Convertion Kits & Accessories ..............56

huNterrotors

PGJ: Gear-Driven Rotors ..............................................58SRM: Gear-Driven Rotors .............................................58PGP® Ultra: Gear-Driven Rotors ..................................59MPR Nozzles ...............................................................59PGP®: Gear-Driven Rotors............................................60I-20: Gear-Driven Rotors ............................................61MPR Nozzles ...............................................................62I-25: Gear-Driven Rotors .............................................63I-40: Gear-Driven Rotors .............................................64I-90: Gear-Driven Rotors .............................................65ST System: Synthetic Turf Rotors ....................................66ST Rotors ....................................................................66ST Accessories .............................................................66ST Fittings ...................................................................67ST Rotor Tools .............................................................67

table of Contents



MP rotatorsMP Rotator: Multi-Stream Rotor ....................................68MP Rotator Accessories ................................................70Eco-Rotator: Rotary Sprinkler Combination ...................70

sprays & NozzlesPS Ultra: Sprays with Pre-Installed Nozzle .....................71PS Ultra Accessories ....................................................71Pro-Spray®: Residential/Commercial Sprays ..................72Pro-Spray® PRS30: 2.1bar (210 kPa) Pressure Reg .........73Pro-Spray® PRS40: 2.8bar (280 kPa) Pressure Reg .........74Spray Nozzles .............................................................74Filter Screens ...............................................................75Bubblers and Bubbler Nozzles ......................................76

Valves1” PGV: Professional Grade Valves ...............................771” PGV Jar-Top: Professional Grade Valves ...................77PGV 1½” & 2” Valves ..................................................77ICV: Institutional Commercial Valves .............................78IBV: Hunter Brass Valves ..............................................78Accu-Sync ...................................................................79Drip Control Zone Kit ..................................................79HCV: Hunter Check Valves ...........................................80Valve Accessories ........................................................80

Pressure regulatorsMini Pressure Regulators ..............................................81Universal-Flo Landscape Regulator ...............................81

ValvesHQ: Quick Coupling Valves .........................................82HK: Quick Coupling Keys ............................................82HQ: Quick Coupling Swivels ........................................82

ControllersX-Core Controller - Indoor ...........................................83X-Core Controller - Outdoor ........................................83XC Hybrid Controller ...................................................83Pro-C Controller .........................................................84Pro-C Quick Reference Chart .......................................84DUAL Decoder ............................................................85I-Core DUAL ...............................................................85ACC Communications Components & Accessories ........86GPRS Cellular Data .....................................................87ACC Decoder: Advanced Commercial Controller 2-Wire ...87ICD-HP .......................................................................87

Cable, Connectors & earthingDecoder Controller Cables ..........................................88Cable Connectors .......................................................88Earth Grounding & Control ..........................................88

Battery ControllersNODE ........................................................................89NODE KIT...................................................................89Wireless Valve System ..................................................89

remote ControllersROAM XL ....................................................................90ROAM ........................................................................90

Pump start relayPSR: Pump Start Relay ..................................................90

Central ControlsIMMS: Irrigation Management and Monitoring System ..91

sensorsMini-Clik ....................................................................92Rain-Clik™ ...............................................................92Wireless Rain-Clik™ ..................................................92Freeze-Clik® .............................................................92Soil-Clik™ ..................................................................93Wind-Clik™ ...............................................................93Mini-Weather Station ...................................................93Flow-Clik® ................................................................93

BSP/Slip Adapters for Flow Sensors...............................93Solar Sync™ ...............................................................94Sensor Accessories ......................................................94

Micro irrigationPLD: Professional Landscape Dripline ..........................95PLD Drip Fittings..........................................................95Eco-Mat ......................................................................96PLD-ESD: Enhanced Subsurface Dripline Tubing ............96Point Source Drip Emitters ............................................97Root Zone Watering System .........................................98RZWS Accessories ........................................................99

Miscellaneous ProductsMP Quick Connector .................................................100MP Riser ...................................................................100MP Regulator/Drain Check ACME Thread ...................100

Miscellaneous ProductsSwing Joint – Threaded ..............................................101Hunter Flexible Tubing – Swing Pipe ...........................101Hunter Spiral Barb Elbows .........................................101Tools .........................................................................102Marker Flags .............................................................102Tools & Accessories ....................................................102

Manifold fittingsMale Ultra Zone Manifold Fittings ..............................103

golf ProductsB Series: Gear Driven Rotors ......................................104TTS 800 Series: Total-Top-Service Gear Driven Rotors ..105TTS 900 Series: Total-Top-Service Gear Driven Rotors ..107DIH 800 Series: Decoder-In-Head Total-Top-Service .....108DIH 900 Series: Decoder-In-Head Total-Top-Service .....110Retro Riser Kits ..........................................................111Rotor Accessories ......................................................111Golf Rotor Tools ........................................................111Tools & Accessories ....................................................111Pilot Golf Central Control Systems ..............................112Weather Stations .......................................................120

swing Joints1” Body Diameter Swing joint ....................................1211¼” Body Diameter Swing joint .................................1211½” Body Diameter Swing joint .................................1222" Body Diameter Swing joint .....................................1233" Body Diameter Swing joint .....................................123

AccessoriesACME Test Cap .........................................................124Snaplok QC Outlet Stabilised Swing joint ...................124ACME Service Fittings: Service Elbow ..........................125ACME Service Fittings: Service Tee ..............................125ACME Service Fittings: Reducing Bushing ....................125ACME Service Fittings: Double Swing Tee ....................125Metric Tap't Fittings: Tap’t Saddles ..............................125Metric Tap't Fittings: Tap’t Hybrid Coupling .................125BSPF to ACME Adaptor: Convert BSP Rotor .................126Swing Joint: Inlet Connectors .....................................126Swing Joint: Outlet Elbows .........................................126Swing Joint Replacement Parts: Swing Arm 12” ..........127Swing Joint Replacement Parts: O-Rings .....................127Swing Joint Replacement Parts: Male Brass Elbow ........127Swing Joint Replacement Parts: SnapLok .....................127

reference3TN Nozzle Chart .....................................................128Discount Structure .....................................................129

freight scheduleAUSTRALIA ..............................................................130NEW ZEALAND ........................................................130

terms & ConditionsTerms & Conditions ...................................................131

table of Contents



R3000Body #9412

CAP #9539

1.4-3.4 bar(20-50 psi)

1.4-3.4 bar(20-50 psi)

1.0-2.0 bar(15-30 psi)

1.0-2.0 bar(15-30 psi)

1.4-3.4 bar(20-50 psi)

1.0-2.0 bar(15-30 psi)

.7-1.0 bar(10-15 psi)

Cap/plate Assy#11969-001

R3000Cap/Plate Body Assy

#11970-001


#12471-001

Blue up-Topu4-8º#8817



#11970-002


#12471-002

WhiTeup-Top#10749



#11970-003


#12471-003

GReenD4-8º#8844



#11970-004


#12471-004

ReDD6-12º#8839



#11970-005


#12471-005

oRanGeMulTi-TRajecToRy

#10598



#11970-006


#12471-006



#11970-007


#12471-007

BRoWnMulTi-TRajecToRy

#10681

oliveMulTi-TRajecToRy

#12360

R3030

CAP #9539

Body #120343030 Dual Nozzle Clip

#12032 list Price $4.80+2 3NV Nozzles

PC-r3000: Part Circle rotator

Code description Qty/Box list Price

10843-001 PC-R3000 Black Plate Cap/Plate & Body/Assy* Only #40-#50 3TN Nozzle 150 $79.49

10843-003 PC-R3000 Tan Plate Cap/Plate & Body/Assy* Only #24-#39 3TN Nozzle 150 79.49

10843-002 PC-R3000 White Plate Cap/Plate & Body/Assy* Only #14-#23 3TN Nozzle 150 79.49

* Price does not include the 3/4” Adaptor & 3TN/3NV Nozzle that are required for a complete Assembly

r3000 & r3030: rotator


9410 3000 Adaptor 3/4” MNPT 900 $2.96

Rotator Plates (See Below) 600 11.21

9539 R3000 Cap/Motor 300 41.87

9461-xxx 3TN Nozzle (See page 128) 100 3.57

9412 R3000/S3000 Body 300 4.43

r3000 Components total (including Nozzle & Adaptor) 96 64.04

11969-xxx Cap/Plate Assembly* 200 53.75

11970-xxx R3000 Cap/Plate Body Assembly* 200 58.18

12035-xxx 3NV Nozzle 4.27

12034 R3030/S3030 Body 10.48

r3030 Components total (including Nozzle & Adaptor) 96 70.79


12471-xxx R3030 Cap/Plate Body Assembly* 60.40

3000 series Pivot Products



0.7-1.4 bar(10-20 psi)

0.7-1.4 bar(10-20 psi)

0.7-1.4 bar(10-20 psi)

0.7-1.0 bar(10-15 psi)


S3000Cap/Plate Body Assy

#11972-001


#12472-001

ReDD6-12º#8839



#11972-002


#12472-002

puRpleD6-20º#9583



#11972-003


#12472-003

yelloWD8-21º#10361

BeiGeSMall nozzle

#11013

The beige plate should be used on flexible drops, or those with at least 0.3m (1ft.) of hose.

The smaller nozzles will be more susceptible to plugging.

S3000Body #9412

CAP #9540

CAP #9540

Body #12034

S30303030 Dual Nozzle Clip


PC-s3000: Part Circle spinner


9926-001 PC-S3000 (Part Circle) Spinner Cap/Plate & Body/Assy* Only 150 $61.97


s3000 & s3030: spinner


9410 3000 Adaptor 3/4” MNPT 900 $2.96

Spinner Plates (See Below) 600 11.21

9540 S3000 Cap/Motor 300 31.04


9412 R3000/S3000 Body 300 4.43

s3000 Components total (including Nozzle & Adaptor) 96 53.21


11972-xxx S3000 Cap/Plate Body Assembly* 200 47.36


12034 R3030/S3030 Body 10.48

s3030 Components total (including Nozzle & Adaptor) 96 59.96


12472-xxx S3030 Cap/Plate Body Assembly* 53.34




0.4-1.0 bar(6-15 psi)

0.4-1.0 bar(6-15 psi)

0.4-1.0 bar(6-15 psi)


a3000Cap/Plate Body Assy

#11973-001


#12473-001

MaRoon#9906



#11973-002


#12473-002

GolD



#11973-003


#12473-003

navyup-Top

Optional Sprinkler Converter #11472

see page 12.

Use with A3000 & D3000 cap for 3-in-one sprinkler

A3000Body #9428

CAP #10402

A3030Body #12346

CAP #10402

3030 Dual Nozzle Clip#12032 list Price $4.80

+2 3NV Nozzles

A3000 & A3030: Accelerator


9410 3000 Adaptor 3/4” MNPT 900 $2.96

Rotor Plates** (See below) 1,000 7.57

10402 A3000 Cap/Motor 300 24.17


9428 A3000 Body 475 2.87

A3000 Components total (including Nozzle & Adaptor) 41.14


11973-xxx A3000 Cap/Plate Body Assembly* 300 35.33


12346 A3030 Body/D3030 8.89

A3030 Components total (including Nozzle & Adaptor) 47.86


12473-xxx A3030 Cap/Plate Body Assembly* 300 41.21

** A3000 Gold Plate & Navy Plate sold assembled with A3000 Cap/Motor




d3000 & d3030: sprayhead


9410 3000 Adaptor 3/4” MNPT 900 $2.96

Spray Plates (See Below) 900 1.59

9429 D3000 Cap 200 1.74


9428 D3000 Body 475 2.87

d3000 Components total (with one spray plate) 120 12.73

10041-xxxx Cap/Plate Assy* 100 3.33


12346 A3030/D3030 Body 8.89

d3030 Components total (including Nozzle & Adaptor) 19.45

10041-xxxx Cap/Plate Assy* 100 3.33

greeN #9543

yelloW #9631

PurPle #9550

Blue #9493

BlACk #9541

grey #9542

orANge #10683

BroWN #10721

turQuoise #9591

red #9437

White #10971

D3000Body #9428

fliP-oVer d3000 CAP #9429 sPrAy

PlAte With CAP Assy #10041-xxxx

D3000 BubblerAttachment (LEPA)

#10577

HD3000 Hose DragAdaptor #9427

fliP-oVer d3000 CAP #9429 sPrAy

PlAte With CAP Assy #10041-xxxx

Body #12346

D30303030 Dual Nozzle Clip


PC-d3000 & PC-d3030: Part Circle sprayhead


9894-001 PC-D3000 (Part Circle) Cap/Plate & Body/ Assy* Only 700 $25.60

PC-D3030 (Part Circle) Cap/Plate & Body/ Assy* Only 34.49






Cap/Plate Body Assy#11970-001

Blue up-Topu4-8º#8817


Cap/Plate Body Assy#11970-003

GReenD4-8º#8844

T3000Body #10419

CAP #9539

3000fC Nozzle#10106-xxx reQuires A rigid droP

CAP & sPrAy PlAte#10324-00x

T3000Body #10419

greeN #9543

-001

yelloW #9631

-002

BlACk #9541

-003

orANge #10683

-006

PurPle #9550

-005

Blue #9493

-004

t3000: trashbuster


9410 3000 Adaptor 3/4” MNPT 900 $2.96

10419 T3000 Body 300 4.89

10324-xxx T3000 Cap/Spray Plate 300 7.69


t3000 Components total (spray & 3tN) 19.11

10106-xxx 3000FC 700 20.51

t3000 Components total (spray & 3000fC) 36.05

For Trashbuster with R3000 Rotator Cap/Motor/Plate, specify and price from R3000 Rotator Section page 6.




Centre Pivot sprinkler Charting & Packaging service

description list Price

Centre Pivot Computer Generated Sprinkler Chart $90.00

Centre Pivot Sprinkler Packaging 97.00

0.7-1.4 bar(10-20 psi)

0.7-1.4 bar(10-20 psi)

0.7-1.4 bar(10-20 psi)

o3000Assy w/ Weight

#11488-101Plastic Cover Version

#11488-301

o3030Assy w/ Weight


#12317-301

Black STanDaRD anGle

o3000Assy w/ Weight


#11488-302

o3030Assy w/ Weight


#12317-302

BlueloW anGle

o3000Assy w/ Weight


#11488-303

o3030Assy w/ Weight


#12317-303

puRpleSMall DRopleT

Weighted CoVer

PlAstiCCoVer

O3000

Weighted CoVer

PlAstiCCoVer

O3030

o3000 & o3030: orbitor


9410 3000 Adaptor 3/4” MNPT 900 $2.96


11488-10x O3000 Body & Weight 24 68.33

o3000 Components total (Weighted Cover) 74.86


11488-30x O3000 With Plastic Cover 55.24

o3000 Components total (Plastic Cover) 61.77


12317-10x O3030 Body & Weight 24 74.35

o3030 Components total (Weighted Cover) 81.58


12317-30x O3030 With Plastic Cover 61.29

o3030 Components total (Plastic Cover) 68.52

3030 Dual Nozzle Clip#12032 list Price $4.80

+2 3NV Nozzles




Pivot Pressure regulators


9572-xxx Square Thread Uni-Flo 100 $21.84

9611-xxx Square Thread Hi-Flo 50 36.95

9491-xxx 3/4” FNPT Uni-Flo 100 24.27

9071-xxx 3/4” FNPT Hi-Flo 50 37.89

Note: The Square Thread Pressure Regulator connects directly to 3000 Series Pivot Sprinklers and eliminates the 3000 Adaptor. Available in 6, 10,15, 20, 25, 30, 40 & 50 PSI

hose Barb fittings


10057 3/4” Hose Barb x 3/4” FNPT 625 $2.80

10148 3/4” Hose Barb x 3/4” MNPT 725 1.66

9901 3/4” Hose Barb x 3000 Adaptor 800 3.13

hd3000 hose drag Adaptor for lePA


9410 3000 Adaptor 3/4” MNPT 900 $2.96

9461-xxx 3TN Nozzle 100 3.57

9427 HD3000 Adaptor 800 5.37

hd3000 Components total 11.90

EIS-05001 Single Ended LEPA Sock - 24" 1 22.23

EIS-05002 Double Ended LEPA Sock - 49" 1 22.23

3/4” FNPT x Square Thread Uni-Flo Hi-Flo 6 PSI 9572-001 9611-001 10 PSI 9572-002 9611-002 15 PSI 9572-003 9611-003 20 PSI 9572-004 9611-005 25 PSI 9572-005 9611-006 30 PSI 9572-006 9611-007 40 PSI 9572-007 9611-008 50 PSI 9572-008 9611-009

3/4” FNPT x 3/4” FNPT Uni-Flo Hi-Flo 6 PSI 9491-001 9071-001 10 PSI 9491-002 9071-002 15 PSI 9491-003 9071-003 20 PSI 9491-004 9071-005 25 PSI 9491-005 9071-006 30 PSI 9491-006 9071-007 40 PSI 9491-007 9071-008 50 PSI 9491-008 9071-009

Bubbler Attachment

#10577list Price $3.30

Square ThreadPressure Gauge

Adapter#10766

list Price $49.58

1lb. Modular Weight

#10130list Price $17.98

Triple Nozzle Clipfor all 3000 Series

+3 3TN Nozzles#11089

list Price $5.45

Sprinkler Converter3-in-one sprinkler


Dual Nozzle Clipfor all 3000 Series

+2 3TN Nozzles#9742

list Price $3.47

ACCessories


HYDRO CONNECTList Price Exc GST - 1 October 2015


galvanised steel goose Necks


HC-SGN180M 180° 3/4” M x M Galvanised Goose Neck 20 11.99

HC-SGN180F 180° 3/4” M x F Galvanised Goose Neck 20 14.80

HC-SGN180B 180° 3/4” M x Hose Barb Galvanised Goose Neck 20 11.99

Note: Thread protectors on all male threads.

Plastic goose Necks & truss rod hose Clips


HC-PGN180B 180° 3/4” M x Hose Barb Plastic Goose Neck 100 $11.99

HC-PGN180B15 180° 1/2” M x Hose Barb Plastic Goose Neck 100 12.59

HC-PGN125SB 125° 3/4” M x Hose Barb Plastic Goose Neck 250 9.56

HC-PGN125SB15 125° 1/2” M x Hose Barb Plastic Goose Neck 250 10.16

HC-PGN125DB Double 125° 3/4” M x Hose Barbs Plastic Goose Neck 100 13.99

HC-PGN125DB15 Double 125° 1/2” M x Hose Barbs Plastic Goose Neck 100 14.59

HC-TRC625 Truss Rod Hose Clip for 5/8" Rod (Maroon) 150 6.64

HC-TRC687 Truss Rod Hose Clip for 11/16" Rod (Green) 100 6.64

HC-TRC750 Truss Rod Hose Clip for 3/4" Rod (Black) 100 6.64

HC-TRC812 Truss Rod Hose Clip for 13/16" Rod (Grey) 100 6.64

HC-TRC875 Truss Rod Hose Clip for 7/8" Rod (Blue) 100 6.64

steel drops


HC-SD078 Galvanised Drop 3/4” M x M - 78” Long (1.98m) 10 $61.90

HC-SD084 Galvanised Drop 3/4” M x M - 84” Long (2.13m) 10 66.69



Note: Thread protectors on all male threads.

drop hose Weights


10130 1.0lb (0.45 kg) Modular Weight 48 $17.98

HC-PSW150 1.5lb (0.68 kg) Poly Slip Weight with Clamp Notch 20 14.95

HC-PSW200 2.0lb (0.90 kg) Poly Slip Weight with Clamp Notch 20 19.21

HC-PTW150 1.5lb (0.68 kg) Poly Threaded Weight 3/4” M x M 20 18.15

Pivot Products



drop hose


HC-DHS 3/4” Black Drop Hose - 76m (250 ft) 1 $277.38

HC-DHBLU 3/4” Blue Drop Hose - 76m (250 ft) 1 308.43

HC-DHRED 3/4” Red Drop Hose - 76m (250 ft) 1 308.43

HC-DHP 3/4” Blue Premium Drop Hose - 76m (250 ft) 1 429.53

Pressure gauges


HC-PG050BE 3” Pressure Gauge, Glycerine Filled 0-50 psi (0-350 kPa) Bottom Entry

100 $52.03


100 52.03


100 52.03


100 52.03

HC-PG100RE 3” Pressure Gauge, Glycerine Filled 0-100 psi (0-700 kPa) Rear Entry

100 52.03

HC-PG010PR 3” Pressure Gauge, Glycerine Filled 0-30 PSI (0-200 kPa) for 10 Psi Pressure regulator - Rear Entry with Coloured Gauge Face

100 58.09


100 58.09


100 58.09

Pressure drop kit for Pivot systems


HC-PDKW150 Poly Threaded Weight 3/4” F x M with 1/4” Gauge Tapping 12 $25.41

HC-PDK100 Includes 3” Pressure Gauge, Glycerine Filled 0-100 psi (0-700 kPa) - Rear Entry

8 77.44

HC-PDK010PR Includes 3” Pressure Gauge, Glycerine Filled 0-30 PSI (0-200 kPa) for 10 Psi Pressure regulator - Rear Entry with Coloured Gauge Face

8 83.50


8 83.50


8 83.50

Drop Hose Clamp1-1/16” 0.945-1067(for 3/4” Drop Hose; 1EAR)

#hC-dhC075list Price $0.63

Hose Clamp ToolPneumatic

#hC-dhCtoolAirlist Price PoA

Hose Clamp ToolStandard

#hC-dhCtoollist Price $78.98

Long Handle#hC-dhCtoollhlist Price $144.10

Pivot Products



flexible drop hose: Cut to length

Code description standard Black

standardred/Blue

Premium Blue

HC-DHx048 Flexible Drop Hose Plain End - 48" $7.30 $7.81 $9.81

HC-DHx054 Flexible Drop Hose Plain End - 54" 7.87 8.45 10.69




















Note: Change 'x' when ordering: Standard Black Hose use "S". Premium Hose use 'P'. Standard coloured hose use ‘R’ for Red or ‘B’ for Blue.

gauge, tee kits & fittings

Code description list Price

HC-PGK075 20mm (3/4”) Poly Gauge Kit (does not include the Gauge) $12.79

HC-PTK075 20mm (3/4”) Universal Poly Tee Kit 41.50

HC-PP075 20mm (3/4”) Poly Threaded Plug BSP Male 1.65

HC-PS075 20mm (3/4”) Poly Threaded Socket BSP Female 5.46

HC-PN075 20mm (3/4”) Poly Threaded Nipple BSP Male 2.74

HC-PE075 20mm (3/4”) Poly Threaded F&F Elbow BSP Female 7.75

HC-PTP075100 20mm (3/4”) x 100mm Poly Threaded Pipe M&M 4.26

HC-PT075 20mm (3/4”) Poly Threaded Tee BSP Female 6.24

HC-PB075025 20mm (3/4") x 6mm (1/4") BSP Plastic Bush 3.17

Pivot Products



flexible drop hose: Cut to length & Assembled

Code description standard Black

standardred/Blue

Premium Blue

HC-DHx048MM Flexible Drop Hose Assembled Male x Male - 48" $14.61 $15.12 $17.12

HC-DHx054MM Flexible Drop Hose Assembled Male x Male - 54" 15.18 15.76 18.00




















HC-DHx048MF Flexible Drop Hose Assembled Male x Female - 48" $15.75 $16.26 $18.26

HC-DHx054MF Flexible Drop Hose Assembled Male x Female - 54" 16.32 16.90 19.14




















Note: Change ‘x’ when ordering: Standard Black Hose use “S”. Premium Hose use ‘P’. Standard coloured hose use ‘R’ for Red or ‘B’ for Blue.

Pivot Products



Boom Backs: Alumi Boom with Brace

Code description Qty list Price

HC-PB15A4 Alumi Boom 15ft – 4” Span Pipe 1 $318.29

HC-PB15A5 Alumi Boom 15ft – 5” Span Pipe 1 318.29


HC-PB15A658 Alumi Boom 15ft – 6 5/8” Span Pipe 1 318.29


HC-PB15A858 Alumi Boom 15ft – 8 5/8” Span Pipe 1 334.20


Boom Backs: rigid hose drop


HC-RHD0844 Rigid Hose Drop 84” – 4" 1 $194.16

HC-RHD0845 Rigid Hose Drop 84” – 5" 1 194.16


HC-RHD084658 Rigid Hose Drop 84” – 6 5/8" 1 194.16


HC-RHD084858 Rigid Hose Drop 84” – 8 5/8" 1 210.07


Boom Backs: hose Boom


HC-PB15H4 Hose Boom 15ft – 4” Span Pipe 1 $448.78

HC-PB15H5 Hose Boom 15ft – 5” Span Pipe 1 448.78


HC-PB15H658 Hose Boom 15ft – 6 5/8” Span Pipe 1 448.78


HC-PB15H858 Hose Boom 15ft – 8 5/8” Span Pipe 1 464.70


Boom Backs: double hose Boom


HC-PB30H4 Double Hose Boom 30ft – 4" Span 1 $897.56

HC-PB30H5 Double Hose Boom 30ft – 5" Span 1 897.56


HC-PB30H658 Double Hose Boom 30ft – 6 5/8" Span 1 897.56


HC-PB30H858 Double Hose Boom 30ft – 8 5/8" Span 1 913.48


Pivot Products



r55: end gun


12009 R55 Body End Gun Rotator with Adaptor (No Nozzle) 1 $548.92

11790-00x Nozzle Assembly MNPT (Red - 001, Yellow -002, Green -003 or Blue -004) 1 113.88

11790-01x Nozzle Assembly MBSP (Red - 011, Yellow -012, Green -013 or Blue -014) 1 113.88

11793-0xx Complete r55 (Body & Nozzle Assembled) 1 662.81

r75 & r75lP: end gun


11936-001 R75 Body End Gun Rotator with Adaptor (No Nozzle) $1,127.97

11936-002 R75LP Body (Low Pressure) End Gun Rotator with Adaptor (No Nozzle) 1,127.97

12178-0xx 7TN Nozzle (Beige -052, Red -056, Yellow -060, Green -064, Blue -068, White -072) 29.21

Pressure (bar)

#52 Purple Nozzle #60 Red Nozzle #70 Yellow Nozzle #80 Green Nozzle #90 Blue Nozzle

Flow (m3/hr) Radius (m) Flow (m3/hr) Radius (m) Flow (m3/hr) Radius (m) Flow (m3/hr) Radius (m) Flow (m3/hr) Radius (m)

1.00 4.1 11.9 6.2 12.2 8.2 12.5 10.1 12.5 11.6 13.4

1.50 5.0 13.1 7.5 14.0 9.9 14.0 12.2 14.3 14.1 14.9

2.00 5.7 14.0 8.7 14.9 11.4 15.2 14.1 15.5 16.3 16.2

2.50 6.5 14.3 9.7 15.2 12.7 15.5 15.7 16.2 18.3 16.8

2.75 6.8 14.3 10.2 15.2 13.3 15.5 16.5 16.5 19.1 16.8

PreliMiNAry r55 PerforMANCe (MetriC uNits)

Pressure (bar)

#52 Beige #56 Red #60 Yellow #64 Green #68 Blue #72 WhiteFlow

(m3/hr)

Radius

(m)

Flow

(m3/hr)

Radius

(m)

Flow

(m3/hr)

Radius

(m)

Flow

(m3/hr)

Radius

(m)

Flow

(m3/hr)

Radius

(m)

Flow

(m3/hr)

Radius

(m)

R75

LP

1.75 5.4 14.9 6.3 15.5 7.1 16.2 8.1 16.8 9.2 16.8 10.2 17.1

2.00 5.8 15.5 6.7 16.2 7.6 16.5 8.7 17.4 9.8 17.4 10.9 17.7

2.50 6.4 16.5 7.5 16.8 8.5 16.8 9.7 18.0 10.9 18.0 12.1 18.3

2.75 6.8 16.5 7.8 17.1 9.0 17.1 10.2 18.0 11.5 18.3 12.7 18.6

R75

2.75 6.8 17.4 7.8 18.0 9.0 18.6 10.2 19.8 11.5 19.8 12.7 19.5

3.00 7.1 17.7 8.2 18.3 9.4 18.9 10.6 20.1 12.0 20.1 13.3 19.8

3.50 7.7 18.0 8.9 18.6 10.2 19.2 11.5 20.4 13.0 20.4 14.4 19.8

4.00 8.2 18.0 9.5 18.9 10.9 19.8 12.3 21.0 13.9 20.7 15.4 20.4

Preformance data has been obtained under ideal test conditions and may be adversely affected by wind, poor hydraulic entrance conditions or other factors.

PreliMiNAry r75 & r75lP PerforMANCe (MetriC uNits)

R5512-17m 15-21m 21-28m 28-37m

(40-55’) @

1.0-2.8 bar

(15-40 PSI)

(50-70’) @

1.7-4.0 bar

(25-60 PSI)

(70-90’) @

7.7-5.5 bar

(25-80 PSI)

(90-120’) @

2.8-5.5 bar

(40-80 PSI)

Up to 10 acres(4.0 ha)

irrigating fullcircle


corners only

Up tp 13 acres(5.3 ha)



corners only

Up tp 17 acres(6.9 ha)



corners only




corners only

R75 SR75 SR100

TYPICAL ADDED ACREAGE ON A 1/4 MILE PIVOT

end gun & Part Circle solutions



Part Circle impact

Code description kg/Box list Price

P65M 1” Male Part Circle with anti-backsplash arm and diffuser 1.7 $729.22

7RN Drive Nozzle for P65M 18.44

P85AS 1 1/4” Male Part Circle with single nozzle 18° 3.5 1,257.28

8DRN Drive Nozzle for P85AS 45.17

Big gun sprinklers


SR75 Part Circle — Slow Reverse (18°) 10 $2,668.88

TR75 Individual Taper Ring Nozzle — Specify Size 53.15

SR100 Part Circle — Slow Reverse (18°) 11 3,398.39

SRNV100E SR100 Nozzle Valve w/Solenoid (110V or 24V) (18°) 16 5,175.93

SRNV100H SR100 Nozzle Valve without Solenoid 16 4,716.13

SRNV100DP SR100 Nozzle Valve w/ Delta P (less nozzle) 5,175.93

100T Taper Bore Nozzle —Specify Size 0.2 125.69

Note: Nozzle sold separatelyContact NICA for special "vaneless" waste-water options.For additional nozzles & accessories see page 37-40.

end gun & Part Circle solutions

800P — 2” Pivot end gun Control Valve

800P Control Valve + sr75 or sr100. Specify ANSI Flange Connection on Big Gun and B11 or B12 Connection Style on Valve. Example: A2 B11 C3 and 100 Series Big Gun. (See Page 44 for full valve details.)

Lower Flange not included (#10356 2” FNPT X ANSI) = $75.25

Purge Valve

Specify 1.5” MNPT (#10474) or 1.5” MBSP (#10474-001) $1,547.35

APPLICATION: Install at the end of centre pivot systems for automatic flushing at start-up and shut-down — or, configure with an electric solenoid interfaced with the centre pivot for automatic flushing while system is operating.

delta P

#12289 = $460.35

The Delta P can be paired with the SRNV100 to improve reliability by eliminating the need for a costly solenoid. The Delta P automatically opens and closes the nozzle valve by sensing pressure upstream and downstream of the booster pump.



R5 pop-up

#11261-XXX

Plate: Green = 1Wine = 2Blue = 3

Nozzle: #35 Orange#40 Blue#45 Purple #50 Green #55 Yellow

Plate

For Flow Control use: #09 for 32 LPH (8.5 GPH)#11 for 41 LPH (11 GPH)#14 for 53 LPH (14 GPH)#18 for 68 LPH (18 GPH)#24 for 90 LPH (24 GPH)

R5 & R5Fc

#9836-XXX

Plate: Green = 1Wine = 2Blue = 3

Nozzle: #35 Orange#40 Blue#45 Purple #50 Green #55 Yellow

Plate

For Flow Control use: #09 for 32 LPH (8.5 GPH)#11 for 41 LPH (11 GPH)#14 for 53 LPH (14 GPH)#18 for 68 LPH (18 GPH)#24 for 90 LPH (24 GPH)

r5 & r5 Pop-up


9836-xxx Standard R5 Assembly including Plate & Nozzle $5.74

9836-xxx R5 Assembly including Plate & FC Nozzle 6.86

11261-xxx Standard R5 Pop-up Assembly including Plate & Nozzle 15.30

11261-xxx R5 Pop-up Assembly including Plate & FC Nozzle 16.79

Note: Specify plates and nozzles from list below.

Threaded Cap for Acme Adaptor#10615List Price $1.81

Female Acme x 1/2" PVC Spigot#10352List Price $1.86

Adaptor Options for R5 (with #10616), R10, R10T

Acme thread

MNPT Adaptor

3/8” - #94651/2” - #9316-0023/4” - #9466List Price $2.62

PVC Adaptor

1/2” - #10060-0013/4” - #10060-002

List Price $2.13

R5 Deflector Cap


ACME x Drip Fitting


R5 Installation Tool

#11108list Price $47.12

R5 Stream Splitter2-Sided


Female ACME x R5 Adaptor




10mm (3/8) BSP Male x R5 Adaptor

#hC-AdPM10Jlist Price $1.58

R5 Pop-UpStream Splitter

2-Sided#12050

list Price $2.50

ACCessories

rotators



r10 & r10t (turbo)


R10/R10T Body Assembly — Less Nozzle & Plate 300 $7.79

Plate — P2 9°, P4 9°, P4 15°, P6 9° or P6 15° 300 1.91

Plate — P8 15° or P8 24° 300 3.63

9306-xxx 2TN Nozzle 500 0.78

total with Body, Plate & 2tN Nozzle (specify 3/8", 1/2" or Acme) 400 10.48

total with Body, P8 15° or P8 24° Plate & Nozzle 400 12.20

total with Body, Plate & 10 fC Nozzle (specify 1/2" or Acme) 400 12.29

total with Body, P8 15° or P8 24° Plate & 10 fC Nozzle 400 14.05

MNPT Adaptor (Male Acme x 3/8”, 1/2” or 3/4”) 2,000 2.62

PVC Adaptor (Male Acme x 1/2” or 3/4” ) 2.13

Note: Specify plates and nozzles from list below.

ACCessories

R10 Road GuardLow Angle

(Red)#9590-030

list Price $9.50



2TN Nozzle Remover Tool

#10634list Price $23.13

R10 Snail Guard


R10 Road GuardHigh Angle

(Orange)#9879

list Price $9.50



R10

#9913-XXXX Thread: 3/8” MNPT = 0 1/2” MNPT = 1 Acme Female = 2

Plate: Red = 1White = 2 Orange = 7

Plates NozzlesFlow in

LPH / (GPM) @2.5 bar / (35 PSI)

p2 9° Red #9460

#40 Lt. Blue #9306-040 64.7 / (.28)

#45 Lt purple #9306-045 80.6 / (.35)

#50 Dk Green #9306-050 99.4 / (.43)

.35 10FC** 79.5 / (.35)

p4 9°White#9208

#50 Dk Green #9306-050 99.4 / (.43)

#55 Lt Yellow #9306-055 120 / (.52)

15°Orange#10882

#60 Red #9306-060 141 / (.61)

.50 10FC** 114 / (.50)

**Use #9587-xxx. Call NICA for part numbers.

Thread PlateNozzle

R10T

#9914-XXXX Thread: 3/8” MNPT = 0 1/2” MNPT = 1 Acme Female = 2

Plate: Blue = 3 Purple = 4 Brown = 5Gold = 6

Plates NozzlesFlow in

LPH / (GPM) @2.5 bar / (35 PSI)

p6 9° Blue #9350

#65 Grey #9306-065 166 / (.72)

#70 White #9306-070 192 / (.83)

15°purple#9723

#78 Blue #9306-078 242 / (1.05)

.75 10FC** 170 / (.75)

1.0 10FC** 227 / (1.00)

p8 15°Gold#10684

#86 Orange #9306-086 294 / (1.27)

#94 purple #9306-094 374 / (1.50)

24°Brown#10601

#102 Yellow #9306-102 411 / (1.78)

.75 10FC** 284 / (1.25)

1.0 10FC** 341 / (1.50)

**Use #9587-xxx. Call NICA for part numbers.

Thread PlateNozzle

rotators



r2000


9422-xxx Cap Assembly Only — Less Plate 125 $17.95

9516-xxx Plate (K1 to K5) 500 3.57

10519-xxxx Cap Assembly w/ Plate (Assembled) 21.52

9155 2T Body (Female Acme Thread) 625 2.71

9306-xxx 2TN Nozzle (Nozzle options #8.3 to #16) 500 0.78

10533-xxx 2t Body w/ 2tN Nozzle (Assembled) 3.49

9223-xxx 2000FC Nozzle Body (Female Acme Thread) 500 6.97

11991-xxxx total with 2tN Nozzle 25.01

11992-xxxx total with 2000fC Nozzle 28.49


total with 2tN Nozzle & MNPt Adaptor 27.63

total with 2000fC Nozzle & MNPt Adaptor 31.11


Note: Specify Plate and Nozzle when ordering.

Body Assy w/ Nozzle

#10533-xxx

Body Assy w/ FC Nozzle#9223-xxx

Cap Assy w/ Plate#10519-xxxx

Adaptor Options for R2000

Acme thread

MNPT Adaptor

3/8” - #94651/2” - #9316-0023/4” - #9466List Price $2.62

PVC Adaptor

1/2” - #10060-0013/4” - #10060-002List Price $2.13

Plates Cap Assy w/Plate Nozzles Body Assy

w/NozzleComplete Assy less Adaptor

Flow in LPH/(GPM) @ 3.0 bar/(40PSI)

K1 - 6°(#9516-106) 10519-1106 8.3 (#9306-065) 10533-008 11991-0108 183 / (0.77)

.85 FC 9223-085 11992-0108 193 / (0.85)

K2 - 6°(#9516-206)

10519-12069 (#9306-070) 10533-009 11991-0209 210 / (0.89)

10 (#9306-078) 10533-010 11991-0210 266 / (1.12)1.0 FC 9223-100 11992-0210 227 / (1.00)

K2 - 9°(#9516-209)

10519-1209

8.3 (#9306-065) 10533-008 11991-0308 183 / (0.77)9 (#9306-070) 10533-009 11991-0309 210 / (0.89)

10 (#9306-078) 10533-010 11991-0310 266 / (1.12).85 FC 9223-085 11992-0308 193 / (0.85)1.0 FC 9223-100 11992-0310 227 / (1.00)

K2 - 15°(#9516-215)

10519-1215

8.3 (#9306-065) 10533-008 11991-0408 183 / (0.77)9 (#9306-070) 10533-009 11991-0409 210 / (0.89)

10 (#9306-078) 10533-010 11991-0410 266 / (1.12).85 FC 9223-085 11992-0408 193 / (0.85)1.0 FC 9223-100 11992-0410 227 / (1.00)

K3 - 9°(#9516-309)

10519-1309

11 (#9306-086) 10533-011 11991-0511 323 / (1.36)12 (#9306-094) 10533-012 11991-0512 380 / (1.61)

1.25 FC 9223-125 11992-0512 284 / (1.25)1.5 FC 9223-150 11992-0515 341 / (1.50)

K3 - 15°(#9516-315)

10519-1315

11 (#9306-086) 10533-011 11991-0611 323 / (1.36)12 (#9306-094) 10533-012 11991-0612 380 / (1.61)

1.25 FC 9223-125 11992-0612 284 / (1.25)1.5 FC 9223-150 11992-0615 341 / (1.50)

K3 - 24°(#9516-324)

10519-1324

11 (#9306-086) 10533-011 11991-0711 323 / (1.36)12 (#9306-094) 10533-012 11991-0712 380 / (1.61)

1.25 FC 9223-125 11992-0712 284 / (1.25)1.5 FC 9223-150 11992-0715 341 / (1.50)

K4 - 6°(#9516-406)

10519-1406

13 (#9306-102) 10533-013 11991-0813 451 / (1.90)14 (#9306-109) 10533-014 11991-0814 509 / (2.15)

1.5 FC 9223-150 11992-0815 341 / (1.50)2.0 FC 9223-200 11992-0820 454 / (2.00)

K4 - 9°(#9516-409)

10519-1409

13 (#9306-102) 10533-013 11991-0913 451 / (1.90)14 (#9306-109) 10533-014 11991-0914 509 / (2.15)

1.5 FC 9223-150 11992-0915 341 / (1.50)2.0 FC 9223-200 11992-0920 454 / (2.00)

K4 - 12°(#9516-412)

10519-1412

13 (#9306-102) 10533-013 11991-1013 451 / (1.90)14 (#9306-109) 10533-014 11991-1014 509 / (2.15)

1.5 FC 9223-150 11992-1015 341 / (1.50)2.0 FC 9223-200 11992-1020 454 / (2.00)

K4 - 15°(#9516-415)

10519-1415

13 (#9306-102) 10533-013 11991-1113 451 / (1.90)14 (#9306-109) 10533-014 11991-1114 509 / (2.15)

1.5 FC 9223-150 11992-1115 341 / (1.50)2.0 FC 9223-200 11992-1120 454 / (2.00)

K4 - 24°(#9516-424)

10519-1424

13 (#9306-102) 10533-013 11991-1213 451 / (1.90)14 (#9306-109) 10533-014 11991-1214 509 / (2.15)

1.5 FC 9223-150 11992-1215 341 / (1.50)2.0 FC 9223-200 11992-1220 454 / (2.00)

K5 - 9°(#9516-509)

10519-150915 (#9306-117) 10533-015 11991-1315 597 / (2.53)16 (#9306-125) 10533-016 11991-1316 685 / (2.89)

2.5 FC 9223-250 11992-1325 568 / (2.50)

K5 - 15°(#9516-515)

10519-151515 (#9306-117) 10533-015 11991-1415 597 / (2.53)16 (#9306-125) 10533-016 11991-1416 685 / (2.89)

2.5 FC 9223-250 11992-1425 568 / (2.50)

K5 - 24°(#9516-524)

10519-152415 (#9306-117) 10533-015 11991-1515 597 / (2.53)16 (#9306-125) 10533-016 11991-1516 685 / (2.89)

2.5 FC 9223-250 11992-1525 568 / (2.50)

rotators



r2000Wf & r2000lP (low Pressure)


Cap Assembly Only — Less Plate 125 $17.95

Plate (WF10 to WF20) 500 3.57

10299-xxx Cap Assembly w/ Plate - Assembled 21.52

9920 WF Body (Female Acme Thread) 625 2.71

9306-xxx 2TN Nozzle (Nozzle options #10 to #20) 500 0.78

9920-0xx Wf Body w/ 2tN Nozzle - Assembled 3.49

total with 2tN Nozzle 25.01


total with 2tN Nozzle & MNPt Adaptor 27.63


Note: Specify Plate and Nozzle when ordering.

Adaptor Options for R2000WF/LP

Acme thread

MNPT Adaptor

3/8” - #94651/2” - #9316-0023/4” - #9466List Price $2.62

PVC Adaptor

1/2” - #10060-0013/4” - #10060-002

List Price $2.13

Body Assy w/ Nozzle#9920-0xx

Cap Assy w/ PlateWF = #10299-1xxLP = #10299-2xx

Plates Nozzles CompleteR2000WF

CompleteR2000Lp

Flow inLPH / (GPM) @

3.5 bar / (50 PSI)

WF10 Blue #12113

#10 Blue #9306-078 #9928-1010 #9929-1010 286 / (1.25)

WF12 purple#10452

#11 Orange #9306-086 #9928-1211 #9929-1211 350 / (1.53)

#12 purple #9306-094 #9928-1212 #9929-1212 412 / (1.80)

WF14Green#9877

#13 Yellow #9306-102 #9928-1413 #9929-1413 487 / (2.13)

#14 Green #9306-109 #9928-1414 #9929-1414 550 / (2.40)

WF16Red#9931

#15 Tan #9306-117 #9928-1615 #9929-1615 647 / (2.82)

#16 Red #9306-125 #9928-1616 #9929-1616 739 / (3.23)

WF18Yellow#9870

#18 Gold #9306-141 #9928-1818 #9929-1818 940 / (4.11)

WF20Brown#9878

#20 Brown #9306-156 #9928-2020 #9929-2020 1144 / (5.00)

rotators



r2000CW (Cow Wash)


11993-10xx total Components Assembled $31.20

Adaptor (Male Acme x ½" or 3/4" MNPT) 2.62

Note: Specify Adaptor Size

PC-r2000Wf & PC-r2000lP


10242-xxxx PC-R2000WF - Cap & Plate Assembly, Body & Nozzle Assembly, Road Guard $36.78

11296-xxxx PC-R2000LP - Cap & Plate Assembly, Body & Nozzle Assembly, Road Guard 36.78

Adaptor (Male Acme x ½" or 3/4" MNPT) 2.62

Note: Specify Adaptor Size Road Guard Shipped Unassembled

Plates Nozzles PC-R2000WF PC-R2000LP

WF10 Blue #12113

#10 Blue #10242-1010 #11296-1010

WF12 purple#10452

#11 Orange #10242-1211 #11296-1211

#12 purple #10242-1212 #11296-1212

WF14Green#9877

#13 Yellow #10242-1413 #11296-1413

#14 Green #10242-1414 #11296-1414

WF16Red#9931

#15 Tan #10242-1615 #11296-1615

#16 Red #9928-1616 #11296-1616

WF18Yellow#9870

#18 Gold #10242-1818 #11296-1818

WF20Brown#9878

#20 Brown #10242-2020 #11296-2020

rotators



R2000(WF) Cap Removal Tool

#10689list Price $64.97

Legacy R10/R2000(WF)

Low Angle Road Guard#9590-030

list Price $9.50

R2000(WF)Flush Tool


New Style R2000(WF) Motor Removal Tool

#12215list Price $46.34

Female ACME x1/2” PVC Spigot


R2000 Web Guard

#9895-001list Price $0.73

Lock Washer for 2000 Series Rotators


R2000 Plate Remover Tool


New Style R2000(WF)High Angle Road Guard (Orange)

#12213-001list Price $15.07

R2000 LegacyStream Splitter


R2000 Security Lock use with PVC Adaptor

Security Screw Removal Tool#9347 list Price $18.06

Security Screw#9329 list Price $0.94

Internal locking Device#10045 list Price $1.90

R2000 Deflector Cap


Snail Guard Copper


1/2” BSPF x ACMEFAdaptor

#hC-AdPAf15flist Price $2.96

Pressure Gauge Tap AssemblyFemale ACME x Male ACME

#10367list Price $21.73

0 - 50 PSI Gauge - #hC-Pg050Be0 - 100 PSI Gauge - #hC-Pg100Be0 - 150 PSI Gauge - #hC-Pg150Be

list Price $52.03

R2000WF NozzleRemoval Tool

#12260list Price $46.34

Legacy R10/R2000(WF)

High Angle Road Guard#9879

list Price $9.50

New Style R2000Stream Splitter


R2000 Legacy Protector

(for older body assembly)#10398-001

list Price $3.83

Threaded Cap for ACME


ACCessories

PVC & MNPT Adaptors

Acme thread

MNPT Adaptor

3/8” - #94651/2” - #9316-0023/4” - #9466List Price $2.62

PVC Adaptor

1/2” - #10060-0013/4” - #10060-002

List Price $2.13

r2000 rotator Accessories



r33 & r33lP


11466-10xx R33 Sprinkler Assembly & Adaptor $40.70

11466-11xx R33LP (Low Pressure) Sprinkler Assembly & Adaptor 40.70

R33/R33LP Flush Tool

#11161-001 (short)#11161-002 (long)

list Price $8.93

R33/R33LP Lock Washer#11417

list Price $1.28MNPT Adaptor 3/4” with Lock Washer (assembled)

#11344-001list Price $5.38

R33/R33LP MNPT Adaptor 3/4”


Diffuser/Motor Installation/Removal Tool

#11478list Price $49.42

R33/R33LP Road Guard

#11363list Price $21.80

33TN Nozzle Removal Tool

#11473list Price $49.42

Plates Nozzles Assy R33

Assy R33LP

Flow inLPH / GPM @

3.5 bar / (50 PSI)

#18 Gold

Gold (9/64”)

#11466-1018 #11466-1118 931 / (4.07)

#20 Brown

Brown(5/35”)

#11466-1020 #11466-1120 1143 / (5.00)

#22Grey

Grey(11/64”)

#11466-1022 #11466-1122 1375 / (6.01)

#24Green

Green(3/16”)

#11466-1024 #11466-1124 1639 / (7.16)

#26Maroon

Maroon(13/64”)

#11466-1026 #11466-1126 LP ONLY1935 / (8.45)

rotators



1/2” FNPT inlet x1/2” MNPT outlet

1/2” FNPT inlet xAcme outlet

Acme inlet xAcme outlet

1/2” MNPT inlet xx Acme outlet

1/2” MNPT inlet x1/2” MNPT outlet

MRDC 11150-0xxMR 11146-0xx

MDC 11154-020 or -035

MRDC 11152-0xxMR 11148-0xx

MDC 11156-020 or -035

MRDC 10406-0xxMR 10020-0xx

MDC 11140-020 or -035

MRDC 10407-0xxMR 10099-0xx

MDC 11139-020 or -035

MRDC 11153-0xxMR 11149-0xx

MDC 11157-020 or -035

3/4” FNPT x 3/4” FNPT

Uni-Flo Hi-Flo 6 PSI 9491-001 9071-001 10 PSI 9491-002 9071-002 15 PSI 9491-003 9071-003 20 PSI 9491-004 9071-005 25 PSI 9491-005 9071-006 30 PSI 9491-006 9071-007 35 PSI 9491-009 9071-010 40 PSI 9491-007 9071-008 50 PSI 9491-008 9071-009 60 PSI 9491-012

3/4” FNPT x Acme

Uni-Flo 30 PSI 9610-006 40 PSI 9610-007 50 PSI 9610-008

20 PSI (1.4 BAR) 0xx = 02030 PSI (2.1 BAR) 0xx = 03035 PSI (2.4 BAR) 0xx = 035

40 PSI (2.8 BAR) 0xx = 04045 PSI (3.1 BAR) 0xx = 045

50 PSI (3.4 BAR) 0xx = 05060 PSI (4.1 BAR) 0xx = 060

1/2" Mini Pressure regulators & drain Checks


MRDC Mini Regulator Drain Check (Brown) 150 $17.04

MR Mini Regulator (Grey) 150 15.48

MDC Mini Drain Check (Green) 150 14.05

HC-ADPAF15F ACME Female x 1/2" BSP Female connection 150 2.96

Note: Mini Regulator Drain Check (MRDC) and Mini Regulator (MR) specify pressure: 20, 30, 35, 40, 45, 50 or 60 PSI (1.4, 2.1, 2.4, 2.8, 3.1, 3.4 or 4.1 BAR) nominal pressures — and specify connection (see below).MDC is a check valve only that opens 2-5 PSI (.14-.35 BAR) below the nominal pressure rating.Available in 20 and 35 PSI (1.4-2.4 BAR) options.

3/4" Pressure regulators


9491-xxx 3/4" FNPT x 3/4" FNPT Uni-Flo 100 $24.27

9071-xxx 3/4" FNPT x 3/4" FNPT Hi-Flo 50 37.89

9610-xxx 3/4" FNPT x Acme Uni-Flo 100 24.63

Pressure regulators



Feedtube (Protected by Pipe)

LTO Compression x Barb

Shallow bury the poly-ethylene lateral tubing for protection and to anchor it in place. Shallow bury the feed tube for protection.

A PVC stake is inexpensive, protects the tubing, and is much stronger than other micro irrigation stakes.

NO EXPOSED TUBING FOR

RODENTS TO CHEW

distance from top to

exit hole

4 mm feedtube options for r5

½ PVC-4: Feedtube Assembly for R5 or R5 Pop-UpCode description list Price

11258 PVC Stake Adaptor (Grey) — 4 mm $1.70

9960-924 4 mm x 24” (61 cm) Flexible PVC Feedtube & LTO, 4 mm Barb Assembly 1.35

11260-21224 1/2” PVC stake 12” (30 cm) - hole 4” from top, PVC stake Adaptor 4 mm x 24” (61 cm) tube w/ Barb (Assy)

5.97

11260-21530 1/2” PVC stake 15” (38 cm) - hole 4.5” from top, PVC stake Adaptor 4 mm x 30” (76 cm) tube w/ Barb (Assy)

6.54

11260-21830 1/2” PVC stake 18” (46 cm) - hole 8” from top, PCV stake Adaptor 4 mm x 30” (76 cm) tube &w/ Barb (Assy)

6.81

Note: Distance from top to exit holes, see below.

ft-01: Feedtube Assembly for R5 (upright mount)Code description list Price

10847 Stake 12” (300 mm) $1.24

10848 Stake 17.5” (450 mm) 1.42




Note: 30” (76 cm) feedtube not available as stake assembly.

feedtube Assemblies



4 mm feedtube options for r5

ft-02: Feedtube Assembly for R5 (inverted mount)Code description list Price

10136 R5 Rod Stake Adaptor $0.92

9987 Hanger Rod Clip (2 are required) 0.41



10040-024 6.3 mm Fiberglass Plastic Rod Stake 24” (61 cm) 2.80

9726-024 6.3 mm Steel Rod Stake 24” (61 cm) 3.65


Note: For complete assembly order adaptor, 2 clips, feedtube and stake.

ft-03: Feedtube Assembly for R5 (upright mount)Code description list Price

10136 R5 Rod Stake Adaptor $0.92







Note: For complete assembly order adaptor, feedtube and stake.

4mm Tubing305m (1000’) Coil

#10081-002list Price $344.15

LTO Barb x Barb


Stake Installation Tool

#10287list Price $22.19

Hand Punch Tool4mm (Green)

#10997list Price $24.43

Goof Plug(order in 20s)


ACCessories

feedtube Assemblies



5 mm feedtube options for r5 & r10

ft2: Feedtube Assembly for the R10Code description list Price

9677 Steel Rod Stake Adaptor Acme $2.32

9284-030 5 mm x 30” (76 cm) Flexible PVC Feedtube 0.89

9284-042 5 mm x 42" (107cm) Flexible PVC Feedtube 1.22

9305 LTO, 5 mm Compression x 5 mm Barb 1.45

9741-030 ft2 total w 30" tube — total Assembled (does not include stake) 5.32

9741-042 ft2 total w 42" tube — total Assembled (does not include stake) 5.67




½ PVC-5: Feedtube Assembly for R5 & R10 (#40-60, .35 & .5FCN)Code description list Price

11271 PVC Stake Adaptor (Black) — 5 mm $2.02

11283-030 5 mm x 30” (76 cm) Flexible PVC Feedtube & 9305 LTO 2.71

11284-22130 1/2” PVC stake 21” (53 cm) - hole 9.5” from top, PVC stake Adaptor 5mm x 30” (76 cm) tube with Barb (Assembled)

7.64


7.98


7.64

¾ PVC-5: Feedtube Assembly for R5 & R10Code description list Price

11429 3/4” PVC Stake Adaptor — 5 mm Compression x Male Acme $2.43

9284-030 5 mm x 30” (76 cm) Flexible PVC Feedtube 0.89


11455-12130 3/4” PVC stake 21” (53 cm) - hole 10" from top, PVC stake Adaptor, 5 mm x 30” (76 cm) tube with Barb (Assembled)

9.64

5mm Tubing305m (1000’) Coil

#9284list Price $344.15

FT2 & ¾ PVC-5 Drill Punch Tool

5mm#9835-003

list Price $63.99

FT2 & ¾ PVC-5 Hand Punch Tool

5mm (Red)#9349

list Price $27.69

Converts FT2, FT4 & FT5 to

¾” PVC Stake#9195

list Price $2.04

Stake Installation Tool for 6.3 mm

Stake#10287

list Price $22.19

FT2 & ¾ PVC-5 Dual Goof Plug

(Order in 20s)#9986

list Price $0.32

ACCessories

feedtube Assemblies



10 mm feedtube options for r10-r2000Wf

ft4: Feedtube Assembly for R10, R10T, R2000, R2000LP, R2000WFCode description list Price


9099-036 10mm x 36" (91cm) Flexible PVC Feedtube 2.43


ft4 total — Components only 6.77

9752-036 ft4 total — total Assembled (does not include stake) 8.40

9725-024 8 mm Steel Rod Stake 24” (61 cm) 4.70

10160 8 mm Fiberglass Plastic Rod Stake 24” (61 cm) 4.50

¾ PVC-10: Feedtube Assembly for R10, R10T, R2000, R2000LP, R2000WFCode description list Price

11429 3/4” PVC Stake Adaptor — 10 mm Compression x Male Acme $2.43



11452-12136 3/4” PVC stake 21” (53 cm) - hole 10" from top, PVC stake Adaptor, 10mm x 36” (91 cm) tube with Barb (Assembled)

11.56

ft5: Feedtube Assembly for R10, R10T, R2000, R2000LP, R2000WFCode description list Price



9740 QC LTO, 10 mm Compression x Male QC 1.70

9739 QC Barb, Female QC x 10 mm 1.26

ft5 total — Components only 8.49

9737-048 ft5 total — total Assembled (does not include stake) 10.23

9725-048 8 mm Steel Rod Stake 48” (122 cm) 9.31

feedtube technical data

FT5 Drill Hole Size For HDPE & MDPE Pipe - 5/16"

Note: For LDPE or Oval Pipe Use Smaller hole

for ft5 Push & twist inserter see Page 32.

feedtube Assemblies



10mm Tubing152.5m (500’) Coil

#9099list Price $388.75

¾ PVC-10 & FT4Hand Punch Tool

7mm (blue) #9810

list Price $30.54

Replacement Blade for FT5 Push & Twist

#hC-ft5toolBlist Price $187.16

FT2, FT4 & FT5 Stake Installation

Tool for 8mm Stake #10288

list Price $18.93

FT5 Push & Twist Inserter

#hC-ft5toollist Price $724.50

FT5Hand Punch Tool

10mm (White) #9776

list Price $34.39

tools & PArts for 10 MM AsseMBlies

¾ PVC-10 & FT4Drill Punch Tool

7mm #9835-002

list Price $56.26

¾ PVC-10 & FT4Goof Plug


¾ PVC-10, FT4, FT5

Coupler 10mm#9813

list Price $2.98

FT5 Drill Installation ToolInstalls #9739

(QC Barb) of FT5 #9845

list Price $59.26

FT5 Plug, Rubber(fits inside of

#9739 QC Barb) #9826

list Price $1.90

¾ PVC-10, FT4, FT5 ½” Spigot x 10mm Compr.


FT5 Drill Punch Tool

10mm #9835-001

list Price $56.26

FT5 Goof Plug(fits in place of

#9739 QC Barb) #9831

list Price $1.67

¾ PVC-10, FT4, FT5 ½” Spigot x 10mm Compr.


feedtube Assemblies



ft1 repair Parts


9262 FT1 Collar Adaptor 3/8" FNPT $2.39

9284-030 5 mm x 30" (76 cm) Flexible PVC Feedtube 0.89


11283-030 5 mm x 30" Flexible PVC Feedtube & #9305 LTO 2.71

feedtube Assemblies



spinner: s5


11826-2xx Standard S5 Assembly including Plate & Nozzle 200 $5.74

11826-2xx S5 Assembly including Plate & FCN Nozzle 200 6.86

feedtube Assembly for s5 (inverted mount)


11258 PVC Stake Adapter (Grey) — 4 mm $1.70

9960-912 4 mm x 12” (30.5 cm) Flexible PVC Feedtube & LTO, 4 mm Barb Assy 1.10

9960-918 4 mm x 18” (46 cm) Flexible PVC Feedtube & LTO, 4 mm Barb Assy 1.24

9960-924 4 mm x 24” (61 cm) Flexible PVC Feedtube & LTO, 4 mm Barb Assy 1.35

12422-012 Complete Assy: PVC Adapter, 4 mm x 12” (30.5 cm) flexible PVC feedtube/lto, 4 mm Barb Assy

3.56

12422-018 Complete Assy: PVC Adapter, 4 mm x 18” (46 cm) flexible PVC feedtube/lto, 4 mm Barb Assy

3.67

12422-024 Complete Assy: PVC Adapter, 4 mm x 24” (61 cm) flexible PVC feedtube/lto, 4 mm Barb Assy

3.95

Note: PVC Pipe Weight not included

S5

#35 Orange #40 Blue

#45 PurpleNozzle: #50 Green

#55 Yellow

#11826-2XX For Flow Control use: #09 for 32 LPH (8.5 GPH)#11 for 41 LPH (11 GPH)#14 for 53 LPH (14 GPH)#18 for 68 LPH (18 GPH)#24 for 90 LPH (24 GPH)

Nursery & greenhouse sprinklers



#10135-XXXThread: Acme = 001 1/2” = 002

Thread D10#9914-8XXX1/2” with Grey plate = 0001/2” with Green plate = 0011/2” with Black plate = 002Acme with Grey plate = 003Acme with Green plate = 004Acme with Black plate = 005

Thread/Plate R10TGPlate Thread

#10078-XXXXPlate: Green (low) = 1 Black (high) = 2 Grey (flat) = 3

Thread: Acme = 000 1/2” = 001

S10

spinner: s10


10078-x00x S10 Spinner Plate & Body Assembly (Specify plate & base) $15.06

9306-xxx 2TN Nozzle (Specify size: 10, 11, 12, 13, 14, 15, 16, 17, 18 or 20) 0.78

*total with Body, Plate & 2tN Nozzle 300 15.84

MNPT Adaptor (Male Acme x 3/8”, 1/2” or 3/4” MNPT) 2.62

PVC Adaptor (Male Acme x 1/2”or 3/4”) 2.13

Complete s10 with MNPt Adaptor 18.46

Complete s10 with PVC Adaptor 17.97

spray: d10Code description Qty/Box list Price

10135-00x D10 Spray Plate & Body Assembly (Specify base) $8.10

9306-xxx 2TN Nozzle (Specify size: 10, 11, 12, 13, 14, 15, 16, 17, 18 or 20) 0.78




Complete d10 with MNPt Adaptor 11.50

Complete d10 with PVC Adaptor 11.01

rotator: r10tgCode description Qty/Box list Price

9914-800x R10TG Plate & Body Assy. (Specify plate & base) $12.87

9306-xxx 2TN Nozzle (Specify size: 12, 13, 14, 15, 16, 17, 18 or 20) 0.78




Complete r10tg with MNPt Adaptor 16.27

Complete r10tg with PVC Adaptor 15.78

Note: *Specify 1/2" or Acme Base (Acme requires adaptor)

Adaptor Options

Acme thread

MNPT Adaptor

3/8” - #94651/2” - #9316-0023/4” - #9466List Price 2.62

PVC Adaptor

1/2” - #10060-0013/4” - #10060-002

List Price $2.13

Nozzle Options

#10 Blue #9306-078 242 1.05 #11 Orange #9306-086 294 1.27#12 Purple #9306-094 347 1.50#13 Yellow #9306-102 411 1.78#14 Green #9306-109 463 2.00#15 Tan #9306-117 544 2.35#16 Red #9306-125 624 2.70#17 Turquoise #9306-133 711 3.08#18 Gold #9306-141 795 3.44#20 Brown #9306-156 966 4.18

Part #Flow in

LPH@ 2.5 bar

Flow in GPM

@ 35 PSI

Nursery & greenhouse sprinklers



TO ORDER BIG GUNS® SPECIFY THE FOLLOWING:

MOdeL NO., TRAjeCTORy, CONNeCTION SIze & TyPe, NOzzLe SIze & TyPe, OPTIONAL COATINgS (ANOdIzed OR ANOdIzed ANd POWdeR COATed).

Note: Extended lead time may be necessary for large quantities of anodized or anodized and powder coated products. Specification Example: SR100 24°, 2” FNPT, 100T-0.8”

75 & 100 SERIES 150 SERIES 200 SERIES

AN

SI/D

IN C

OM

PATI

BLE

FL

AN

GE

NE

LSO

NFL

AN

GE

1/2-13 UNC 2B Threaded Through

Use 1/2-13 Bolts Connects to 2” ANSI or 50mm DIN Flanges

2.32”(59mm)

4.62”(117mm)

5.72”(145mm)

9.1mm Hole Drilled Through

Use M8 Bolts & NutsConnects to European Traveler Flange

56mm 130mm 150mm

Use 5/16-18 BoltsConnects to 2” Nelson Flange Bolt Pattern


2.3”(59mm)

4.0”(102mm)

4.6”(117mm)



3.2”(81mm)

5.88”(149mm)

6.9”(175mm)

M8 x 1.25 - 6H Threaded Through

Use M8 x 1.25 Bolts Connects to European Traveler Flange

81mm 130mm 165mm

Use 3/8-16 Bolts & Nuts or M10 Bolts & NutsConnects to 3” Nelson Flange Bolt Pattern

.406” (10.3mm) Hole Drilled Through

3.2”(81mm)

5.75”(146mm)

6.5”(165mm)



4.35”(111mm)

7.74”(197mm)

8.9”(226mm)

M8 x 1.25 - 6H Thread .75” (19mm) Deep

Use M8 x 1.25 BoltsConnects to European Traveler Flange

111mm 130mm 193mm

Use 3/8-16 Bolts & NutsConnects to 4” Nelson Flange Bolt Pattern(F200 has same bolt pattern as SR150.)

3/8-16 UNC Thread .75” (19mm) Deep

4.35”(111mm)

5.75”(146mm)

7.6”(193mm)

Contact NICA for Industrial/Effluent configurations which may be applicable when the water contains higher levels of suspended solids and/or chemicals that can be abrasive or binding in nature.

75 SERIES 100 SERIES 150 SERIES 200 SERIES 6.8-36.3 M3/H (30-160 GPM)

10-70 M3/H (50-300 GPM)

23-129 M3/H (100-550 GPM)

55-270 M3/H (250-1000 GPM)

21°, 24° 18°, 21°24°, 43°

21°, 24° 27°, 43°

21°, 24°, 27°

Part Circle

SR75Part Circle

SR200Full Circle

F200

21°, 24°

Part Circle

SR150Part Circle

SR100Full Circle

F150Full Circle

F100Part Circle

SRA150Part Circle

SRA100

15-45° Adjustable

15-45° Adjustable

PERF

ORM

AN

CE

MO

DE

L &

TRA

JEC

TORY

TAP

ER 100T

(Choice of 10 sizes)Not Available 150T

(Choice of 8 sizes)

Full Circle

F75

200T (Choice of 9 sizes)

NO

zzLE

OP

TIO

NS

100TR (Body, Cap & Choice of 9 sizes)

TR75(Choice of 9 sizes)

150TR (Body, Cap & Choice of 7 sizes)

Not AvailableNA for SRNV

100R (Body, Cap & 7 Rings)

Not Available 150R (Body, Cap & 7 Rings)

200R (Body, Cap & 7 Rings)R

ING

1 1/2” or 2” FNPT or FBSPANSI/DIN

Nelson FlangeCO

N-

NE

CTI

ON 2” FNPT or FBSP,

2 1/2” FNPTANSI/DIN, Nelson

Flange

2” FNPT or FBSP

for SRNV

Nelson or ANSI/DIN Flange / Also, Nelson Flange to Female Adaptors

Nelson or ANSI/DIN Flange (SR200 only)

Also, Nelson Flange to Female Adaptors

TAP

ER

RIN

G

18°, 21°, 24°, 43°

Big gun® sprinklers



75 series: Big gun® sprinklers


F75 Full Circle HD 8 $2,142.30

SR75 Part Circle HD — Slow Reverse (18°, 21°, 24°) 10 2,668.88

SR75 Environmental Control — Slow Reverse (43°) 10 2,905.20

QC-SR75 Quick Coupling SR75 with Integral QC Key 15 5,563.80

QC-F75 Quick Coupling F75 with Integral QC Key 14 4,985.85

TR75 Individual Taper Ring Nozzle

Specify size#10208-0xx

list Price $53.15

F75/F100 Wedge Kit 12°

#11095list Price $215.77

Flange2” FNPT x ANSI

(800P Valve Gun Combo)

#10356list Price $75.25

Nozzle Cap Only(included on

75 Series Big Gun) #10207

list Price $83.10

SR75/SR100 Wedge Kit 12°

#11098

list Price $258.92

Nozzles & ACCessories

QC 75 Valve Key

2” BsP #8655-002flanged #8657-001list Price $2,792.18

QC 75 Valve

2” BsP #89343” BsP #8799-001

list Price $1,171.33

Secondary Nozzle 3RNSpecify Size#8898-xxx

list Price $7.30






*F100 Full Circle (18°, 21°, 24°) 9 $2,180.83

*F100 Environmental Control — Full Circle (43°) 9 2,373.48

*SR100 Part Circle — Slow Reverse (18°, 21°, 24°) 12 3,398.39

*SR100 Environmental Control — Slow Reverse (43°) 12 3,698.93

*SRA100 Part Circle — Slow Reverse, Adjustable Traj. 11 5,350.60

SRNV100E SR100 Nozzle Valve w/Solenoid (110V or 24V) (18°) 17 5,175.93

SRNV100H SR100 Nozzle Valve without Solenoid 16 4,716.13

QC-SR100 Quick Coupling SR100 with Integral QC Key 17 6,293.32

QC-F100 Quick Coupling F100 with Integral QC Key 16 5,024.38

Note: Contact NICA for special “vaneless” waste-water options.*Contact NICA for pricing and availability of anodized and anodized & powder coated options.

100T Taper Bore NozzleSpecify size

#9309-0xxlist Price $125.69

Secondary Nozzle Kit


Ring or Taper Ring Nozzle Body Only (use with 100R, 100TR)

#9956-001list Price $112.95

SR75/SR100 Wedge Kit 12°

#11098list Price $258.92

Ring Nozzle Cap Only

(use with 100R)#7872

list Price $51.55

100CBKCounterbalance Kitfor SR models only

#8386list Price $911.89

100TR Taper Ring Nozzle Set

Specify size#9257-0xx

list Price $219.68

Flange2” FNPT x ANSI

(800P Valve Gun Combo)#10356

list Price $75.25

QC 100 Valve

2” BsP #89343” BsP #8799-001

list Price $1,171.33

QC 100 Valve Key

2” BsP #8655-002flanged #8657-001list Price $2,792.18

TR100 Individual Taper Ring Only

Specify Size#9237-0xx

list Price $53.66

R100 Individual Ring Only

Specify Size#6738-0xx

list Price $22.22

F75/F100 Wedge Kit 12°

#11095list Price $215.77

100R Ring Nozzle Set

(Cap, Body & 7 Rings)

#6749list Price $313.38

SR100 LPV Kit(Low Pressure

Drive Vane) #9857

list Price $41.00

Taper Ring NozzleCap Only

(use with 100TR)#6745

list Price $52.48

Set of 7 Rings Only

#6847list Price $154.71

600V Vane Stream Straightener Vane (fits 2” x 6” Riser)

#6671list Price $112.12


Secondary Nozzle 3RNSpecify Size

list Price $7.30






*F150 Full Circle — Flanged Connection 17 $4,271.75

*SR150 Part Circle — Slow Reverse, Flanged Connection (18°, 21°, 24°) 19 5,394.27

*SR150 Environmental — Slow Reverse, Flanged Connection (43°) 19 5,874.62

*SRA150 Part Circle — Slow Reverse, Adj. Traj., Flanged Connection 20 7,359.33

**F150SS Full Circle — Flanged Connection, Stainless Steel (includes nozzle)

PoA

**SR150SS Part Circle — Slow Reverse, Flanged Connection, Stainless Steel (includes nozzle)

PoA

Note: Contact NICA for special “vaneless” waste-water options.*Contact NICA for pricing and availability of anodized and anodized & powder coated options.

**Limited availability. Please contact NICA before ordering.

150T Taper Bore NozzleSpecify size#9317-xxx

list Price $214.28

Secondary Nozzle Kit



Specify size#6287-xxx

list Price $46.08

Ring/Taper Ring Nozzle

Cap Only#6286

list Price $116.93

F150 Wedge Kit 12°

#11358list Price $665.29

150TR Taper Ring Nozzle Set

Specify Size#9258-xxx

list Price $390.44

Stream Straightener Vane

(fits 3” x 9” Riser)

#6843list Price $130.93

TR150 Individual Taper Ring Only

Specify Size#9238-xxx

list Price $68.25

Set of 7 Rings Only

#6846list Price $308.24



#6790list Price $511.17

150CBKCounterbalance Kit

#8399list Price $1,019.77

Ring/ Taper Ring Nozzle Body Only

#9773list Price $191.47

Ring/Taper Ring Body &

Cap Assembly#9418

list Price $313.38

SR150 Wedge Kit 12°

#11359list Price $1,024.91


QC 150 Valve Key

#11692list Price $2,792.18

QC 150 Valve 3” BSP Inlet

#11691-003list Price $1,171.33


list Price $7.30

150FI Adaptor3” FBSP x Nelson

Flange#8820

list Price $262.01






F200 Full Circle — Nelson Flange 22 $7,056.22

*SR200 Part Circle — Slow Reverse, HD Bearing, Flanged Connection 32 10,195.17

Note: Contact NICA for pricing and availability of anodized and anodized & powder coated options.*Coating options not available for F200.

200T Taper Bore NozzleSpecify size#9323-xxx

list Price $346.77

SR200 Wedge Kit 12°

#11138list Price $1,209.86

200CBKCounterbalance Kit

#9346list Price $1,618.28

Ring Nozzle Cap Only

#6026list Price $173.72

Ring Nozzle Body Only

#9972-001list Price $375.03

ANSI Flange Adaptor(F200 Only)

#10565list Price $678.14


Specify size#6027-xxx

list Price $70.46



#6789list Price $755.20

Manure Kit(for manure and/or

nozzles 1.75 and larger)

#9425list Price $624.19

Set of 7 Rings Only

#6845list Price $490.62



list Price $18.44

Ring Body & Cap Assembly

#9419list Price $552.27




Part Circle impacts & swivel hose els


P65M 1” Male Part Circle with anti back-splash arm and diffuser pin (includes 7V)

4 $729.22

P85AS 1 1/4” Male Part Circle with single nozzle 18° (includes 8V) 1 1,257.28

P85A 1 1/4” Male Part Circle with double nozzle 18° (includes 8V & 2 plugs)

1 1,330.69

P85 1 1/4” Male Part Circle with double nozzle 24° (includes 8V, no plugs) 1,193.45

8ADN Adjustable Diffuser (including Nozzle) 245.43

8DN Diffuser Assembly (not including Nozzle) 200.36

SH-125 1 1/4" MNPT x 1 1/2" MNPT Swivel Hose 561.58

high Angle impact sprinkler


*F70 1” Male Double Nozzle (includes 7V) 24 $579.79

*F80 1 1/4” Male Double Nozzle (includes 8V) 10 968.31

3/4" & 1" low Angle impact sprinkler


*L20-04T 3/4” Single Nozzle 120 $136.95

*F33AS 3/4” Single Nozzle 60 188.79

*F33AA 3/4” Double Nozzle 60 215.86

*F44AAB 3/4” Double Nozzle (Plastic Sprinkler with Brass Bearing) 48 144.59

*F43A 3/4” Double Nozzle 48 322.97

*F70AM 1” Male Double Nozzle (includes 7V) 24 694.14

*F80A 1 1/4” Male Double Nozzle (includes 8V) 10 1,207.51

Vanes, Nozzles & Plugs


*3V Vane Stream Straightener Vane for 3/4” Impacts $2.12

*4V Vane Stream Straightener Vane for F43, F43A, and F44AA Series 2.12

7V Vane Stream Straightener Vane for F70 and F70A Series, P65 Series 3.52

8V Vane Stream Straightener Vane for all 80 and 85 Series 3.76

*3RN Brass Nozzle: 3/4” Impacts, Secondary for 100 & 150 Series Guns 7.30

*2FCN Flow Control Nozzle 1/2” Sprinklers 13.81

3FCN Flow Control Nozzle 3/4” Sprinklers 21.11

7RN Drive Nozzle F70A, F70, & P65M, Secondary for 150 & 200 Series Big Gun 18.44

8DRN Drive Nozzle F80A, F80, P85A, P85AS, and P85 45.17

3RN Plug Brass Secondary Nozzle Plug for F70A, F80A, 100 Series Gun, P85 and F44AAB

6.97

Note: To order sprinklers with vane, add “V” to Model # and add price of vane.* These items represent products that will be discontinued.

impact sprinklers



SAMPLE ORDER (see opposite page): A6” B5 C2 D3 E40 H3. This configuration represents a 6” valve with wafer style connection (studs & nuts included), 30 to 200 PSI pressure rating, pressure reducing (10 - 120 PSI) control package with a 24VAC 1/16” solenoid, and an internal filter. The total list price is $2,867.88 + $222.55 + $0 + $1,601.42 + $401.50 + $190.43 = $5,283.78

2 & 3" Valve options

BASE VALVE ACCESSORIES

A B C D E Hvalve

MaTeRial/Size

connecTion STyle

& haRDWaRe

opeRaTinG pReSSuRe

pReSSuRe/FloW conTRol

on/oFFMoDe FilTeR

aluMiniuM

a2”$598.42

a3”$970.05

WAFER STYLE

B9 $47.65(No studs)Includes Manual Selector & Mounting Bracket Kits

B10 $175.33(4 studs, 8 nuts)Includes Manual Selector & Mounting Bracket Kits

C1 $0 10-50 PSI

C2 $0 30-200 PSI

C3 $0 18-80 PSI

NONE

d01 $0 REDUCING 5-30 PSI

d11 (Brass) $876.42 d21 (Plastic 2”) $525.00 d31 (Plastic 3”) $525.00

6-60 PSI


10-120 PSI


SUSTAINING 6-60 PSI


10-120 PSI


RATE-OF-FLOW d18 $1,491.30 Specify flow rate & pipe size

SLEEVE EXHAUST d06 $1,096.68

SHUTTLE CHECK d07 $279.90 (Must also order solenoid or pressure control)

MANUAL

e01 (No Solenoid) $0

ELECTRIC SOLENOID

DC (voltage, orifice diameter)

e21 (12V, 1/16") $986.55 e34 (24V, 3/64") $259.26

DC LATCHING

e23 (9/12V, 3/64") $289.08 e28 (12-50V, 11/128") $589.64

e29 (12-40V, 5/64") $371.68

AC (voltage, orifice diameter)

e43 (24V, 3/64") $289.08 e46 (24V, 1/16") $401.50

e53 (110V, 1/16") $362.50

h2$321.20 External

h3$137.66 Internal for 2" & 3"

caST iRon

a2”$809.97

a3”$1,265.45

THREADED

B3 $120.07 ThreadedIncludes Manual Selector & Mounting Bracket Kits

VICTAULIC

B6 $89.57 Includes Manual Selector & Mounting Bracket Kits

Adjustable Pressure-Reducing or Pressure Sustaining Pilots (small body for 2” & 3” valves, large body for 4, 6, & 8” valves)

PRESSURE CONTROL PILOT

Protect the solenoid or pressure controls from clogging. Self-cleaning internal filter is standard. External filter for greater filtration. Use both for the demanding conditions.

INTERNAL & EXTERNAL FILTERS

If outlet pressure exceeds inlet pressure the valve will close.

SHUTTLE CHECK D07

By adding a D06, the main valve can snap open when water arrives. The valve will stay open until upstream pressure reaches 30 PSI. Above 30 PSI the valve will respond to normal solenoid or pressure control.

SLEEVE EXHAUSTD06

Highly Accurate Adjustable Pressure-Reducing or Pressure Sustaining Plastic Pilots for 2” & 3” valves

PLASTIC PRS. CTRL. PILOT

Choose from DC, DC Latching or AC options.

SOLENOIDS

800 series Control Valves



*E46 Solenoid Kit Suits Hunter ACC99D & DUAL Decoder Controllers

4, 6 & 8" Valve options

BASE VALVE ACCESSORIESA B C D E H

valve MaTeRial/

Size

connecTion STyle

& haRDWaRe

opeRaTinG pReSSuRe


on/oFFMoDe FilTeR

aluMiniuM

a4”$1,294.04

WAFER STYLE


B10 $190.58(8 studs, 16 nuts)Includes Manual Selector & Mounting Bracket Kits

B23 $247.75(No studs)4 x 6 Flange Adapters - Includes Manual Selector & Mounting Bracket Kits

B24 $384.974 x 6 Flange Adapters w/Stud Kit - Includes Manual Selector & Mounting Bracket Kits

C1 $0 10-50 PSI

C2 $0 30-200 PSI

C3 $0 18-80 PSI

NONE

d01 $0 REDUCING Large body pilot

d02 (5-50 PSI) $1,580.77 d03 (10-120 PSI) $1,601.42 d04 (25-200 PSI) $1,617.48

SUSTAINING Large body pilot

d05 (25-200 PSI) $1,617.48 d08 (10-120 PSI) $1,601.42 d09 (5-50 PSI) $1,580.77

RATE-OF-FLOW d18 $1,491.30 Specify flow rate & pipe size

SLEEVE EXHAUST d06 $1,096.68

SHUTTLE CHECK d07 $279.90 (Must also order solenoid or pressure control)

MANUAL

e01 (No Solenoid) $0 ELECTRIC SOLENOID

DC (voltage, orifice diameter)

e21 (12V, 1/16") $986.55 e30 (24V, 1/16") $986.55

DC LATCHING

e28 (12-50V, 11/128”) $589.64

e29 (12-40V, 5/64") $371.68

AC (voltage, orifice diameter inrush amps)

e40 (24V, 1/16", 0.15A) $401.50 e41 (24V, 1/16", 1.1A) $536.87

e46*(24V, 1/16", 0.8A) $401.50 e50 (120V, 1/16") $536.87 e52 (120V, 1/16") $1,030.14 (6" & 8" only)

h2 $321.20 External

h3 $190.43 Internal for 4", 6" & 8"

caST iRon

a4”$1,579.91

a6”$2,867.88

a8”$5,744.93

WAFER STYLE


B5 (8 studs, 16 nuts)

4" Valve $163.906" Valve $222.558" Valve $282.20

Includes Manual Selector & Mounting Bracket Kits

B21 (No studs)4 x 6” $247.756 x 8” $706.64Flange Adapters - Includes Manual Selector & Mounting Bracket Kits

B22 4 x 6” $384.976 x 8” $931.49Flange Adapters - Includes Manual Selector & Mounting Bracket Kits




2, 3 & 4" Big gun® Valves

BASE VALVE ACCESSORIESA B C D E H

valve MaTeRial/Size

connecTion STyle& haRDWaRe

opeRaTinG pReSSuRe


on/oFFMoDe FilTeR

aluMiniuM

a2”$598.42

800P - 2” Pivot End Gun ValveB12 $19.06

(No studs)

B11 $99.10(4 studs,4 nuts)

(See chart below for hardware included)

C2 30-200 PSI

$0

C3 18-80 PSI

$0— — —

aluMiniuM

a2”$598.42

a3”$970.05

a4”$1,294.04

Solid Set Big Gun Valve

B17 2" & 3" Valve(4 studs, 4 nuts)

$163.904" Valve(8 studs, 8 nuts)

$165.80


C2 30-200 PSI

$0

C3 18-80 PSI

$0

NONE

d01 $0

REDUCING

d13 (10-120 PSI)(Brass for 2" & 3" Valve)

$876.42

d23 (10-120 PSI)(Plastic for 2” Valve)

$525.00

d33 (10-120 PSI)(Plastic for 3” Valve)

$525.00

d03 (10-120 PSI)(Brass for 4” Valve)

$1,601.42

MANUAL

e01 (No Solenoid)$0

ELECTRIC SOLENOID(voltage, orifice diameter)

DC LATCHINGe28 (12-50V, 11/128")

$589.64

e29 (12-40V, 5/64”)$371.68

AC

e46 (24V, 1/16") $401.50

(other solenoids available upon request)

h2 External

$321.20

h3 Internalfor 2" & 3"

$137.66

h3 Internalfor 4"

$190.43

caST iRon

a4”$1,579.91

Solid Set Big Gun Valve

B18 $190.58(8 studs, 8 nuts)


hardware with Base Valve order B12/B11 B17/B18

3-way manual on/off selector kit (#8980) - 3

Mounting bracket kit (2”- #9189)

(3”+- #8924)- 3

Rubber drain/plug 1 x #9800 Upstream1 x #9800-100 Downstream

1 EACH#9800-100

Ball drain/vent(#10753) 3 -

Air Control Valve


ACV200P Air Control Valve Specify 2” MNPT or 2” MBSP Plastic Base Continuous Acting $247.95

Big gun® & Valve Combos



800 series Accessories


11433 4” Valve x 6” Flange Adapter Kit $240.90

11433-001 4” Valve x 6” Flange Adapter Kit with 6” Stud Kit 406.09

12225 6” Valve x 8” Flange Adapter Kit 649.29

12225-001 6” Valve x 8” Flange Adapter Kit with 6” Stud Kit 874.13

12229-001 Pressure Control Upgrade kit - Small Body Kit 337.38

12230-001 Pressure Control Upgrade kit - Large Body Kit 417.07

HC-PG050BE 3” Pressure Gauge, Glycerine Filled 0-50 psi (0-350 kPa) Bottom Entry 52.03




9498 Male QC Fitting 45.98

9438-002 Female QC Fitting 91.86

10105-xxx Gauge & Fittings Kit -2 Valve Stems, and 1 lock-on chuck. (050,100,150) 152.50

10104 1/4” Valve Stem 9.80

10103 Lock-on Gauge Chuck for 1/4” Valve Stem 38.64

E33-1 Window + Controller w/ 12/24 VDC Lat. (1.2mm orifice. For 2” & 3” Valves) 624.05

E20-1 Window + Controller w/ 12/24 VDC Lat. (1.6mm orifice. For 4”, 6” & 8” Valves) 793.83

Mod

el #

ManufacturerPart Numbers

Voltage1 recomm. Valve size

inrush Amps

holding Amps

resis-tance (ohm)

Watts inlet orificeelectrical

Connection

Max. Pres-sure kit Coil +Base Coil

e21 PArker 8925-001 7510-001 7510-101 12 VdC - - 0.6 20 8 1.6 mm 1/16”1/2” fNPt w/leads

175 psi

e23 BACCArA 8925-035 7510-052 7510-152 9/12 VdC lat 2” & 3” - - 4.2 3 1.2 mm 3/64” >12” leads 175 psi

e28 BerMAd 8925-013 7510-021 NA 12-50 VdC lat - - - 4.2 - 2.2 mm 11/128" 10" leads 175 psi

e29 AQuAtiVe 8925-029 7510-029 NA 12-40 VdC lat - - - - - 2.0 mm 5/64" 47" leads 175 psi

e30 PArker 8925-002 7510-002 7510-102 24 VdC 4”, 6”, & 8” - 0.3 83 8 1.6 mm 1/16”1/2” fNPt w/leads

175 psi

e34 BACCArA 8925-037 7510-054 7510-154 24 VdC 2” & 3” 0.125 0.125 119 3 1.2 mm 3/64” >12” leads 175 psi

e40 geM-sol 8925-043 7510-015 7510-115 24 VAC 4”, 6”, & 8” 0.15 0.15 diode2 2.5 1.6 mm 1/16”1/2” fNPt

Plug-in175 psi

e41 PArker 8925-003 7510-003 7510-103 24 VAC 4”, 6”, & 8” 1.1 0.65 7.8 8 1.6 mm 1/16”1/2” fNPt w/leads

175 psi

e43 BACCArA 8925-033 7510-050 7510-150 24 VAC 2” & 3” 0.125 0.125 diode2 3 1.2 mm 3/64” >12” leads 175 psi

e46 geM-sol 8925-044 7510-016 7510-116 24 VAC - 0.8 0.43 9 5.5 1.6 mm 1/16”1/2” fNPt

Plug-in175 psi

e50 PArker 8925-004 7510-004 7510-104 120 VAC 4”, 6”, & 8” 0.2 0.1 184 8 1.6 mm 1/16”1/2” fNPt w/leads

175 psi

e52 PArker/soleNoid solutioNs

8925-024 7510-033 7510-133 120 VAC 6” & 8” 0.7 0.3 27 17 3.2 mm 1/8”1/2” fNPt w/leads

175 psi

e53 geM-sol 8925-045 7510-051 7510-151 110 VAC 2” & 3” 0.15 0.11 230 5.5 1.6 mm 1/16”1/2” fNPt

Plug-in175 psi

Notes: “Lat” = Latch. The solenoid contains a magnet which holds the coil in the open/closed position, such that a constant current is not required, as in the case of non-latching solenoids. If the solenoid contains a diode, the resistance reading obtained using a voltmeter will be inaccurate (extremely high). This is because a diode acts like a check valve that only opens when a sufficient amount of “pressure” (voltage) is present.

Valve Accessories



inline Valve

Assembled 1000 series Valves

WAfer BsP(Also Victaulic, NPt or spline)

Base Valve 2” 323 3” 434 1½ or 2” 3”

Basic Valve $162 $218 $246 $244

Big Gun Valve (BGV) for Solid Set Big Guns $169 $258

Common Combinations** 2” 323 3” 434 2” 3”

Basic Valve with Manual Control $278 $334 $366 $360

Electric Valve* $368 $424 $457 $451

Electric Valve with Manual Control* $446 $502 $536 $528

Pressure Reducing Valve with Manual Control

$746 $802 $836 $828

Electric Pressure Reducing Valve with Manual Control*

$873 $929 $966 $956

Pressure Sustaining(or Relief) Valve with Manual Control

$746 $802 $836 $828

Battery Operated Electric Valve with Manual Control

$606 $662 $696 $688

stud kits 2” 323 3” 434 2” 3”

For Galvanised Flanges $28.14 $36.10 $36.10

For PVC Flanges $31.43

For Big Gun Valve $25.49 $28.80

Note: *Electric Valve pricing is based on E43 solenoid option and will vary depending on the solenoid selected.**All Common Combinationassembled valve pricing includes a plastic internal filter, add additional for external filter and fittings if required.Other combinations of Inline and Solid Set Big Guns valves are available in assembled format, call Nelson Australia for pricing

tee & elbow Valve

Assembled 1000 series Valves

Base Valve 2”

Tee Valve - Single Control (Includes selector - assembled)

$595.89

Tee Valve - Dual Control(Includes 2 manual selectors - assembled)

$700.48

Elbow Valve (Includes Vmanual selector - assembled)

$468.79

Note: Other combinations of Tee and Elbow valves are available in assembled format, call Nelson Australia for Pricing If a solenoid and/or pressure control is selected for Dual Control Tee Valve then the quantity of solenoids and/or pressure controls is 2.




Components

Basic Valve


12255-xxxx 2” Inline Valve $162.00

12255-xxxx 2” Big Gun Valve (BGV) for Solid Set Big Guns 169.00

3” Inline Valve 246.00

3” Big Gun Valve (BGV) for Solid Set Big Guns 258.00

Connections (eA)


12167 2x3 Flange Adapters for 2" Valve $27.98

3x4 Flange Adapters for 3" Valve coming soon

12365 1 1/2" FBSP Connections for 2" Valve $27.98

12477 2" FBSP Connections for 2" Valve $27.98

12440 1.25" FNPT Connections for 2" Valve $27.98

12441 1.5" FNPT Connections for 2" Valve $27.98

12442 2" FNPT Connections for 2" Valve $27.98

10356PV 2" FNPT Metal ANSI Flanges for 2" Valve $49.01

12165 2" Victaulic Connections for 2" Valve $27.98

12163 3" Victaulic Connections for 2" Valve $27.98

11635 3" Certa-Set Spline Connections for 2" Valve $27.98

stud kits

Code descriptionstud dia.

stud length

Nuts(Qty) list Price

10142-101PV Stud Kit for 2” Metal ANSI Flanges (Table D, Table E or ANSI) 1/2” 8.25” 8 $28.14

10142-102PV Stud Kit for 2” PVC ANSI Flanges (Table D, Table E or ANSI) 1/2” 9.75” 8 31.43

10142-104PV Stud Kit for 3” ANSI Flanges (Table D, Table E or ANSI) 1/2” 11.5” 8 36.10

10142-105PV Stud Kit for 4” Flanges (Table D) Coming soon

10142-205PV Stud Kit for 4” Flanges (Table E or ANSI) Coming soon

12323 Stud Kit with 2 x 3” Adapters for 3” Flanges 1/2” 11.5” 8 92.06

Stud Kit with 3 x 4” Adapters for 4” Flanges Coming soon

10142-001PV Stud Kit for ANSI Big Gun (75 or 100 Series) 1/2” 8.25” 4 25.49

10142-002PV Stud Kit for ANSI Big Gun Valve (150 Series) 28.80

12264-002 Stud Kit for Flex Connections - 2” 1000 5/16” 7.5” 8 19.84

Stud Kit for Flex Connections - 3” 1000 Coming soon

on/off Control


12415 Plastic Manual Selector w/-Tube Connections $83.11




solenoids


dC latching

7510-052 E23 Solenoid - Baccara (9-12V - 1.2mm) $93.22

7510-021 E28 Solenoid - Bermad (12-50 - 2.2mm) 235.44

7510-029 E29 Solenoid - Aquative (12-40V - 2.0mm) 163.13

11222-001 E31 Solenoid - Baccara Window+ (9-12V -1.2mm) 246.74

dC

7510-054 E34 Solenoid - Baccara (24V -1.2mm) 90.47

AC

7510-015 E40 Solenoid - Gemsol (24V -1.6mm) 162.15

7510-050 E43 Solenoid - Baccara (24V - 1.2mm) 93.22



Note: E46 Solenoid Kit Suits Hunter ACC99D & DUAL Controllers

Pressure Control 2”, 323, 3” & 434 Valves


12342-009 Pressure Reducing Pilot 5-30 PSI (0.4-2.0 Bar) Grey Bushing (2” & 323 Valves) $395.77

12342-007 Pressure Reducing Pilot 5-60 PSI (0.4-4.0 Bar) Grey Bushing (2” & 323 Valves) 395.77

12342-008 Pressure Reducing Pilot 10-120 PSI (0.7-8.2 Bar) Grey Bushing (2” & 323 Valves) 395.77

12342-010 Pressure Sustaining Pilot 5-60 PSI (0.4-4.0 Bar) Grey Bushing (2” & 323 Valves) 395.77

12342-011 Pressure Sustaining Pilot 10-120 PSI (0.7-8.2 Bar) Grey Bushing (2” & 323 Valves) 395.77

12432-003 Pressure Reducing Pilot 5-30 psi (0.4-2.0 bar) Brass Bushing (3” & 434 Valves) 395.77



12432-004 Pressure Sustaining Pilot 5-60 psi (0.4-4.0 bar) Brass Bushing (3” & 434 Valves) 395.77

12432-005 Pressure Sustaining Pilot 10-120 psi (0.7-8.2 bar) Brass Bushing (3” & 434 Valves) 395.77

filters


11632 Plastic Internal Filter $25.65

12454 Plastic External Filter 130.57

Accessories


12443 Plastic Mounting Clip for Pilot or External Filter $6.22

12453 Plastic Mounting Clip for Solenoid 9.73

9800-100PV Rubber Drain for BGV 3.11




tube & fittings


8970-005 1/4” Black Tubing (price per ft) $0.39

8970-001 1/4” Tube x 1/8” MNPT Straight Connector 7.21

8970-008 1/4” Tube x 1/4” MNPT Straight Connector 7.21

8970-002 1/4” Tube x 1/8” MNPT Elbow Connector 9.92

8970-006 1/4” Tube x 1/4” MNPT Elbow Connector 10.21

8970-004 1/4” Tube x 1/8” MNPT Tee Connector 14.13

8970-010 1/4” Tube x 1/8” MNPT Male Run Tee Connector 14.70

10645 Restrictor Assy 1/4” Tube 12.14

tube, fittings & Mount kits

description list Price

Electric Valve Fittings Kit $81.00

Pressure Reducing or Sustaining Valve Fittings Kit 69.45

Electric Pressure Reducing Valve Fittings Kit 100.23

External Filter Fittings Kit 47.04

spline Pipe Accessories


12482 IPS Spline x 3” IPS Male Glue PVC Adapter $25.26

12495 IPS Spline x 3” IPS Female Glue PVC Adapter 39.62

12347 Spline 1.90




Wireless tWig Controller

Code Model description list Price

11953-xxx TD200 Controller 240 VAC

Wireless TWIG Controller. Operates up to 100 TWIGs. 240 VAC Power

$4,716.80

11953-xxx TD200 Controller 12 VDC

12 Volt DC Power (order DC solar power kit separately. See below)

4,716.80

Wireless tWig Valve Actuator


11737-xxx TWIG-1i Wireless TWIG with internal antennas. Operates one valve

$2,078.89

11737-xxx TWIG-2i Operates up to two valves independent of each other 2,358.40

11737-xxx TWIG-4i Operates up to four valves independent of each other 2,777.67

12110-xxx TWIG-1e Wireless TWIG for use with external antenna (special order) - Operates one valve

2,078.89

12110-xxx TWIG-2e Operates up to two valves independent of each other 2,358.40

12110-xxx TWIG-4e Operates up to four valves independent of each other 2,777.67

Note: Two D-cell batteries are included with each TWIG unit. Order mounting bracket separately, see next page.

Wireless Contact-tWig 4 latch Contacts


12246-xxx Contact-TWIG D-cell Internal D-cell Battery Power $4,524.63

12246-xxx Contact-TWIG12VCD 12 Volt DC Power 4.524.63

12246-xxx Contact-TWIGAC 240 Volt AC Power 4,524.63

Note: Order external antenna separately, see next page. Mounting hardware not included

Wireless tWig repeater - extending Communication distance


12025-xxx TWIG-Repeater, AC 12 Volt AC Power $2,882.49

12025-xxx TWIG-Repeater, DC 240 Volt DC Power 2,882.49

Note: Order external antenna separately. Order solar power kit separately , see next page.

tWig Wireless Controls



tWig Antenna kits


12000-010 Multi-directional Omni antenna and 10’ cable. Assembly and hardware complete with mating ends ready for connecting antenna to TD200, TWIG Repeater or TWIG that is ordered as external antenna model.

$786.13


828.06


1,118.06


1,222.87


1,275.28

12281 Di-pole Articulating, 2dbi. Small short range antenna 262.04

Accessories


12092 Solar Battery 12VDC. 20 AHr sealed solar battery, terminal posts with nut and bolt hardware

$401.80

hC-WC316ir 3M #316IR Wire Connector 0.5-1.3mm2 Cables. Gel filled. 2.39

solenoids


7510-052 E23 Solenoid - Baccara (9-12V - 1.2mm) $93.22

7510-029 E29 Solenoid - Aquative (12-40V - 2.0mm) 163.13

tWig solar kits


12075-001 Solar kit for TD200with battery

10 Watt solar kit, 12VDC for TD200 and contact-TWIG, Includes battery in box.

$3,057.19

12075-002 Solar kit for Repeaterwith battery

10 Watt solar kit, 12VDC for Repeater,Includes battery in box.

3,057.19

12224-001 Solar kit for TD200without battery

10 Watt solar kit, 12VDC for TD200,charge controller box included

2,183.70

12224-002 Solar kit for Repeaterwithout battery

10 Watt solar kit, 12VDC for Repeater,charge controller box included

2,183.70

tWig Mounting Bracket kits


11948-001 Valve Mount Bracket. Used on 800 Series & 1000 Series Valves $62.89

11948-002 Remote Mount Bracket. Used to mount remote from valve 62.89

tWig Wireless Controls


McMag3000™ 100-300mm (4”-12”) Battery Powered Mag saddle flow Meter

Application: Centre Pivots, Sprinkler or Drip Irrigation, Golf Courses and Park Management, Gravity Turnouts, Canal Laterals, Truck Load & Discharge, Water and Waste Water Management.Code description kg/Box list Price

MC-G304-x-xx 100mm (4”) Battery Powered Mag Saddle Meter 10.5 $5,297.00

MC-G306-x-xx 150mm (6”) Battery Powered Mag Saddle Meter 11.8 5,772.00




Note: Required Ordering Information: Pipe O.D. and I.D. are required for all saddle meter orders.

McMag3000: Cables

10-32V dC / 4-20mA 5-Pin (M) Connector to Open End CableCode description list Price

MC-5M006OE4 10-32VDC / 4-20mA Cable 1.8m $229.00

MC-5M025OE4 10-32VDC / 4-20mA Cable 7.5m 280.00

MC-5M050OE4 10-32VDC / 4-20mA Cable 15m 342.00



Pulse out 1 & 2: 7-Pin (M) Connector to Open End CableMC-7M006OE2 Pulse Output Cable, 1.8m $253.00

MC-7M016OE2 Pulse Output Cable, 5m 284.00



Pulse out 1 & 2: 7-Pin (M) Connector to 7-pin (M) Connector CableMC-7M006OE3 Pulse Output Cable, 1.8m $376.00




McMag3000: options & kits

flanged spool

description 300mm 600mm 900mm Plus/300mm

100mm (4”) Epoxy Coated Carbon Steel Flanged Spool $598.00 $731.00 $867.00 $133.00

150mm (6”) Epoxy Coated Carbon Steel Flanged Spool 867.00 1,063.00 1,266.00 199.00

200mm (8”) Epoxy Coated Carbon Steel Flanged Spool 1,136.00 1,402.00 1,667.00 269.00



kits


MC-9999C05 5 Point Test Cert Record (standard with new meter)

MC-9999C05 5 Point Test Cert Record (recertification) PoA

MC-G3B01 Battery Pack Replacement Kit 342.00

MC-xxxxx Power Supply 171.00

MC-G3VOM01 McLogger Data Logger Kit (software & cable) 1,314.00

McCROMETERList Price Exc GST - 1 October 2015

McMag3000 flow Meters


McPropeller 100-1200mm (4”-48”) M0300: Bolt on saddle flow Meters


MC-MO304 100mm (4”) McPropeller Saddle Flow Meter 6.4 $3,306.00MC-MO306 150mm (6”) McPropeller Saddle Flow Meter 8.6 3,468.00MC-MO308 200mm (8”) McPropeller Saddle Flow Meter 10.5 3,692.00MC-MO310 250mm (10”) McPropeller Saddle Flow Meter 11.8 3,955.00MC-MO312 300mm (12”) McPropeller Saddle Flow Meter 13.6 4,173.00MC-MO314 350mm (14”) McPropeller Saddle Flow Meter 17.3 4,824.00MC-MO316 400mm (16”) McPropeller Saddle Flow Meter 20.0 5,310.00

M0300sW: Bolt on saddle flow Meters

for surface Water ApplicationsCode description kg/Box list Price

MC-M0304SW 100mm (4”) McPropeller Saddle Flow Meter 6.4 $3,759.00MC-M0306SW 150mm (6”) McPropeller Saddle Flow Meter 8.6 3,908.00MC-M0308SW 200mm (8”) McPropeller Saddle Flow Meter 10.5 4,139.00MC-M0310SW 250mm (10”) McPropeller Saddle Flow Meter 11.8 4,401.00MC-M0312SW 300mm (12”) McPropeller Saddle Flow Meter 13.6 4,623.00

M1400: Bolt on saddle flow Meters


MC-M1418 450mm (18”) McPropeller Saddle Flow Meter 25.0 $6,983.00MC-M1420 500mm (20”) McPropeller Saddle Flow Meter 29.5 7,201.00MC-M1422 550mm (22”) McPropeller Saddle Flow Meter 33.2 8,064.00MC-M1424 600mm (24”) McPropeller Saddle Flow Meter 36.4 8,425.00MC-M1430 750mm (30”) McPropeller Saddle Flow Meter 50.0 9,212.00MC-M1436 900mm (36”) McPropeller Saddle Flow Meter 63.6 11,010.00MC-M1442 1050mm (42”) McPropeller Saddle Flow Meter 77.3 12,954.00MC-M1448 1200mm (48”) McPropeller Saddle Flow Meter 90.9 14,690.00

Modelrange Min-Max

(m3/hr)range Max with Marathon Bearing

(m3/hr)Max Pipe od

(mm)

McMag3000™MC-G304-x-xx 9-136 121.9MC-G306-x-xx 21-307 190.2MC-G308-x-xx 35-535 233.4MC-G310-x-xx 55-843 286.8MC-G312-x-xx 80-1,208 340.1

McPropellerMC-MO304 / MC-MO304SW 12 - 136 205 139MC-MO306 / MC-MO306SW 21 - 273 410 190MC-MO308 / MC-MO308SW 23 - 342 513 241MC-MO310 / MC-MO310SW 29 - 410 615 292MC-MO312 / MC-MO312SW 35 - 570 855 342

MC-MO314 57 - 684 1,026 393MC-MO316 63 - 912 1,368 444MC-M1418 91 - 1,140 1,710 495MC-M1420 108 - 1,368 2,052 546MC-M1422 148 - 1,596 2,394 596MC-M1424 160 - 1,938 2,907 673MC-M1430 274 - 2,850 4,275 825MC-M1436 342 - 3,876 5,814 977MC-M1442 456 - 5,700 8,550 1,130MC-M1448 570 - 6,840 10,260 1,287

Note: Required Ordering Information: Pipe O.D. and I.D. are required for all saddle meter orders. Digital registers are available see page 56.


McPropeller flow Meters


Quickpick McPropeller Meter Packages

for McPropeller saddle Meters 400mm (16”) and smaller

Code Package Application inclusions list Price

MC-QP1 MarathonTough environments or applications with high flow rates.

· Marathon Bearing with Ultra Shield*

· Canopy Boot

$247.00

MC-QP2 Extended Warranty Extended Service/Protection· Canopy Boot· 3-Year Warranty

247.00

MC-QP3 Marathon PlusTough environments or applications with high flow rates.

· Marathon Bearing with UltraShield*

· Canopy Boot· 3-Year Warranty

329.00

MC-QPD DigitalFor customers who prefer a digital interface over the standard mechanical option.

· FlowCom Electronic Register MC-FC100-00**

· Canopy Boot

1,316.00

MC-QPRC1McCrometer CONNECT Ready

Equip the meter with a pulse output, allowing the addition of a McCrometer CONNECT Telemetry System. Choose the EA618-02 for a mechanical register or the FlowCom for digital register.

· MC-EA618-02 Transmitter940.00

MC-QPRC2McCrometer CONNECT Ready

· FlowCom Electronic Register MC-FC100-00***

· Canopy Boot

1,316.00

* Marathon bearing is not recommended for low-flow applications. ** This FlowCom configuration is meter mounted with no outputs. Other FlowCom options are vailable. Please

see page 56 for more details or call Nelson Australia*** This FlowCom configuration is meter mounted with an open collector pulse output. It includes Quick Connect

hardware for easy Plug & Play with McCrometer CONNECT systems. NOTE: Cable not included.

Note: Prices are based on line sizes up to 400mm (16”). Please contact Nelson Australia for options in line sizes larger than 400mm (16”).

optional Bearing Configuration: Price Adder

description100mm

(4”)150-400mm

(6-16”)450-900mm

(18-36”)1050-1200mm

(42-48”)

Marathon BearingMC-OT110$171.00

MC-OT112$234.00

MC-OT113$1,085.00

316 SS BearingMC-OT119$823.00

MC-OT1122$1,085.00

316 SS Marathon BearingMC-OT126$908.00

MC-OT128$1,240.00

316 SS with Food Grade GreaseMC-OT132$823.00

MC-OT133$823.00

Potable Water BearingMC-OT109$158.00

McPropeller register options: Price Adder


MC-OT102 7-Wheel Totalizer - Increase Total Accumulation by a Factor of Ten $169.00

MC-OT101 Index Wheel Test Hand 311.00




McPropeller forward/reverse and Anti reverse flow register: Price Adder


MC-OT104 Anti Reverse-Flow Register Prohibits the Register Totalizer from Subtracting its Reading During Reverse Flow Conditions.

$155.00

MC-OT103 Forward/Reverse Register with Dual Scale Flowrate Indicator and Two Separate Totalizers.

2,688.00

McPropeller transmitters & flow Computers


e7000 4-20mA Analog TransmitterMC-E7000000 4-20mA $2,572.00

MC-E7000001 4-20mA With Dry Contact Pulse Output 2,698.00

MC-E7000002 4-20mA With Opto-Isolated Pulse Output 2,698.00

MC-E7000010 4-20mA With Anti-Reverse 4-20mA Output 2,738.00

MC-E7000011 4-20mA With Anti-Reverse 4-20mA & Dry Contact Pulse Output 2,863.00

MC-E7000012 4-20mA With Anti-Reverse 4-20mA & Opto-Isolated Pulse Output 2,863.00

e7500 4-20mA Analog Transmitter, For Meters 600mm (24”) & UpMC-E7500010 4-20mA With Anti-Reverse 4-20mA Output 2,738.00

MC-E7500011 4-20mA With Anti-Reverse 4-20mA & Dry Contact Pulse Output 2,863.00

MC-E7500012 4-20mA With Anti-Reverse 4-20mA & Opto-Isolated Pulse Output 2,863.00

e8000 Forward/Reverse 4-20mA Analog TransmitterMC-E8000000 4-20mA 3,839.00

MC-E8000001 4-20mA With Dry Contact Pulse Output 3,964.00

MC-E8000002 4-20mA With Opto-Isolated Pulse Output 3,964.00

Pulse only output transmittersMC-EA550100 EA550 Hall Effect Pulse Transmitter 1,124.00

MC-EA550100K Retrofit Kit For Existing Meters With Watertight Fitting 1,280.00

MC-EA631xx EA631 Square Wave Pulse Transmitter 1,435.00

MC-SA100xx SA100 Scaled Pulse Transmitter, Switch Closure 1,435.00

MC-EA61802 Pulse Transmitter for McCrometer CONNECT Telemetry System 982.00

MC-MC20D2 EA618-02 With Data Logger 1,157.00

flow ComputersMC-EA40100 Pulse input, 4-20mA & 2 relay outputs 2,695.00

MC-EA40200 4-20mA input, 4-20mA & 2 relay outputs 2,695.00




McPropeller Accessories & options


MC-CB10010 Canopy Boot $109.00

MC-L0780xxx Register Extensions (Min 150mm (6”) - Max 3m (120”) 671.00

Extra cost per 100mm of register extension 23.00

MC-OT10504 100mm (4”) - Hi Temp Impeller (Service Up To 82°C) 321.00




MC-9999C01 1 Point Test Cert. Record standard

MC-9999C03 3 Point Test Cert. Record 602.00

MC-9999C05 5 Point Test Cert. Record 1,187.00

digital register: Convertion kits & Accessories


MC-FC100xxM FC100 Digital Register - Meter Mounted $1,266.00

MC-FC100xxK Conversion Kit from Mechanical to Digital Register 1,571.00

output options: (replace xx above)

00 No outputs (No Cable)

01 Open Collector (7 Pin or open lead cable)

02 4-20mA & Opto Isolated Pulse (open lead cable only)

03 4-20mA & Dry Contact Pulse (open lead cable only)

05 Telemetry Ready Open Collector (7 in to 7 pin male cable required)

remote Cable options Specify as needed:Code description list Price

MC-RM25 Remote Mount w/ 7.5m Cable $331.00

MC-RM50 Remote Mount w/ 15m Cable 496.00

output Cable options - specify as needed. Change code from OCxx to OCTxx when using with telemetry for up to 15m cable lengths. For telemetry cable longer than 15m contact Nelson Australia.Code description list Price

MC-OC06 Output Cable 1.8m (Default Length) $0.00

MC-OC25 Output Cable 7.5m 83.00

MC-OC50 Output Cable 15m 165.00



Register Extension




remote Mount kit for existing meter mounted FlowCom MC-FC100 register only - for converting to remote mount.


MC-FCRMWS25 Remote Mount Kit with 7.5m of Cable $374.00

MC-FCRMWS50 Remote Mount Kit with 15m of Cable 546.00

optional Accessory Recommended for installations where variable frequency drives (VFD) are present

MC-EA63500 4-20mA Loop Isolation Module (DIN rail mount) 324.00

re200 digital resettable totaliser

MC-RE200000 Meter Mount 2,136.00

MC-RE200000K Meter Mount Retrofit Kit 2,186.00

MC-RE200100 Remote Mount 2,186.00

MC-RE200100K Remote Mount Retrofit Kit 2,414.00

MC-RE200200 Dual Registers - Remote Only 4,500.00

McPropeller fs100 flow straightener

FS100 conditions flow to remove swirl and other disturbances for highly accurate, reliable liquid flow measurement Reduces installed space of the flowmeter to 1.5 diameters upstream and 1.0 diameters downstream of the meter.Code description list Price

MC-FS1xxx FS100 Flow StraightenerNominate pipe ID when requesting price

PoA



HUNTERList Price Exc GST - 1 October 2015


PgJ: gear-driven rotors

PgJ, shrub rotor with 8 standard blue nozzles, ½” inletCode description Qty/Box list Price

hi-PgJ00 Shrub body adjustable arc, no check valve 25 $36.50

hi-PgJ00r Shrub body, adjustable arc, with reclaimed water ID logo cap

25 42.58

PgJ, 10 cm (4") Pup-up rotor with 8 standard blue nozzles, ½” inletCode description Qty/Box list Price

hi-PgJ04 10 cm adjustable arc, no check valve 25 $38.53

HI-PGJ04V 10 cm adjustable arc, with check valve 25 42.58

HI-PGJ04R 10 cm adjustable arc, with check valve and reclaimedwater ID logo cap

25 44.61

PgJ, 15 cm (6") Pop-up rotor with 8 standard nozzles and ½” inletCode description Qty/Box list Price




25 62.86

PgJ, 30 cm (12") Pop-up rotor with 8 standard nozzles and ½” inletCode description Qty/Box list Price




12 85.16

srM: gear-driven rotors

srM, 10 cm (4") Pop-up rotor with 6 standard blue nozzles, ½” inletCode description Qty/Box list Price

hi-srM04 10 cm adjustable arc, no check valve 25 $30.42

PgJ & srM Accessories

Check Valve bag of 25Code description list Price

hi-462078 PGJ & SRM Field Installation Check Valve - Bag of 25 $50.78

rotors



PgP® ultra: gear-driven rotors

PgP ultra, shrub rotor with 8 standard blue and 4 low angle grey nozzles, ¾” inletCode description Qty/Box list Price

hi-PgP00 Adjustable arc 50–360°, no check valve 20 $38.53

hi-PgP00CV Adjustable arc 50–360°, with check valve 20 42.58

hi-PgP00CVr Adjustable arc 50–360°, with check valve andreclaimed water ID logo cap

20 46.64

PgP ultra, 10 cm (4") Pop-up rotor with 8 standard blue and 4 low angle grey nozzles, ¾” inletCode description Qty/Box list Price

hi-PgP04 Adjustable arc 50–360°, no check valve 20 $42.58

hi-PgP04CV Adjustable arc 50–360°, with check valve 20 46.64

hi-PgP04CVr Adjustable arc 50–360°, with check valve andreclaimed water ID logo cap

20 48.66

PgP ultra, 30 cm (12") Pop-up rotor with 8 standard blue and 4 low angle grey nozzles, ¾” inletCode description Qty/Box list Price

hi-PgP12CV Adjustable arc 50–360°, with check valve 12 $87.19

HI-PGP12CVR Adjustable arc 50–360°, with check valve andreclaimed water ID logo cap

12 91.25

Note: All PGP Ultra model sprinklers include a complete set of nozzles.

MPr Nozzles

Code description Qty/Bag list Price

hi-MPr25 Matched Precipitation Nozzle Rack with all 7.6 mradius nozzles. Includes a Quarter, Third, Half andFull Circle nozzle.

25 $0.51


25 0.51


25 0.51

PgP ultra Accessories


hi-782900Box Blue nozzle rack(Nozzles 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0 and2.0 LA, 2.5 LA, 3.5 LA, 4.5 LA)

200 $1.01

HI-356605 Dark Blue nozzle rack (Nozzles 1.0, 1.5, 2.0, 3.0, 3.5,4.0, 6.0, 8.0 and 2.0 LA, 2.5 LA, 3.5 LA, 4.5 LA)

1 1.01

hi-466100 Black nozzle rack (Nozzles 5.5 m - .50. 1.0, 2.0 and7.6 m - .75, 1.5, 3.0)

1 1.01

rotors



PgP®: gear-driven rotors

PgP, 10 cm (4") Pop-up rotor with 8 standard blue nozzles, ¾” inletCode description Qty/Box list Price

HI-PGPADJB Adjustable arc 40–360°, no check valve 20 $40.55

Note: All PGPADJB model sprinklers include a complete set of standard BLUE nozzles.

PgP, 10 cm (4") Pop-up rotor with 12 standard red nozzles, ¾" inletCode description Qty/Box list Price

hi-PgPAdJ Adjustable arc 40–360°, no check valve 20 $40.55

Note: All PGPADJ model sprinklers include a complete set of standard RED nozzles.

PgP®Accessories


hi-665300Box Blue nozzle rack(Nozzles 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0)

300 $1.01

hi-130900 Red nozzle rack (Nozzles #1–12) 1 1.01

hi-233200 Grey low angle nozzle rack (Nozzles #4, 5, 6, 7, 8, 9, 10, Plug)

1 1.01

hi-120300 Nozzle Retainer Screw for PGP-ADJ Group 1 1.01

hi-181500 PGP Replacement Riser Seal 1 0.68

hi-102600 Standard black filter screen 1 1.01

hi-142300 Standard black filter screen with check valve 1 2.03

hi-172000 White Adjustment Tool 1 1.01

rotors



i-20: gear-driven rotors

i-20, shrub rotor with 8 standard blue and 4 low angle grey nozzles, ¾” inletCode description Qty/Box list Price

HI-I2000 Adjustable arc 50–360°, no check valve 20 $44.61

HI-I2000R Adjustable arc 50–360°, with check valve andreclaimed water ID logo cap

20 52.72

i-20, 10 cm (4") Pop-up rotor with 8 standard blue and 4 low angle grey nozzles, ¾” inletCode description Qty/Box list Price

HI-I2004NCV Adjustable arc 50–360°, with plastic riser,no check valve

20 $50.69

hi-i2004 Adjustable arc 50–360°, with plastic riser,with check valve

20 50.69

hi-i2004r Adjustable arc 50–360°, with plastic riser,with check valve and reclaimed water ID logo cap

20 58.80

HI-I2004SSNCV Adjustable arc 50–360°, with stainless steel,no check valve

20 68.94

hi-i2004ss Adjustable arc 50–360°, with stainless steel riser,with check valve

20 68.94

hi-i2004ssr Adjustable arc 50–360°, with stainless steel riser andcheck valve and reclaimed water ID logo cap

20 77.05

i-20, 15 cm (6") Pop-up rotor with 8 standard blue and 4 low angle grey nozzles, ¾” inletCode description Qty/Box list Price

hi-i2006 Adjustable arc 50–360°, with plastic riser,with check valve

20 $70.97

HI-I2006R Adjustable arc 50–360°, with plastic riser, with checkvalve and reclaimed water ID logo cap

20 79.08

hi-i2006ss Adjustable arc 50–360°, with stainless steel riser,with check valve

20 95.30

HI-I2006SSR Adjustable arc 50–360°, with stainless steel riser, withcheck valve and reclaimed water ID logo cap

20 103.41

Note: All I-20 model sprinklers include a complete set of nozzles.

rotors




i-20, 30 cm (12") Pop-up rotor with 8 standard blue and 4 low angle grey nozzles, ¾" inletCode description Qty/Box list Price

hi-i2012 Adjustable arc 50–360°, with check valve 12 $101.39

HI-I2012R Adjustable arc 50–360°, with check valve andreclaimed water ID logo cap

12 111.52


MPr Nozzles



25 $0.51


25 0.51


25 0.51

i-20 Accessories


hi-782900Box Blue nozzle rack(Nozzles 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0 and2.0 LA, 2.5 LA, 3.5 LA, 4.5 LA)

200 $1.01

HI-356605 Dark Blue nozzle rack (Nozzles 1.0, 1.5, 2.0, 3.0, 3.5,4.0, 6.0, 8.0 and 2.0 LA, 2.5 LA, 3.5 LA, 4.5 LA)

1 1.01

hi-466100 Black short radius nozzle rack(Nozzles 5.5 m -.50. 1.0, 2.0 and 7.6 m -.75, 1.5, 3.0)

1 1.01

hi-444800 Green high flow nozzle rack (Nozzles 10, 13 and 6.0, 8.0 LA)

1 4.06

hi-102600 Standard black filter screen 1 1.01

hi-142300 Standard black filter screen with check valve 1 2.03

HI-463551 Rotor staking kit (for models PGP-00 & I20-00) 1 8.11

rotors




i-25, 10 cm (4") Pop-up rotor with 1" BSP inletCode description Qty/Box list Price

hi-i2504B Adjustable arc, 50–360°, plastic riser, with checkvalve

12 $111.52

hi-i2504rB Adjustable arc, 50–360°, plastic riser, with checkvalve and reclaimed water ID logo cap

12 127.75

hi-i2504ssB Adjustable arc, 50–360°, stainless riser,with check valve

12 141.94

hi-i2504ssrB Adjustable arc, 50–360°, stainless riser,with check valve and reclaimed water ID logo cap

12 158.16

special Purpose i-25, 10 cm (4") Pop-up rotor with 1" BSP inletCode description Qty/Box list Price

HI-I2504SSHSB High speed, adjustable arc, 50–360°, stainless riser,with check valve

12 $334.57

HI-I2504SSHSRB High speed, adjustable arc, 50–360°, stainless riser,with check valve and reclaimed water ID logo cap

12 354.85


hi-i2506B Adjustable arc, 50–360°, plastic riser, with checkvalve

12 $141.94

HI-I2506RB Adjustable arc, 50–360°, plastic riser, with checkvalve and reclaimed water ID logo cap

12 158.16

hi-i2506ssB Adjustable arc, 50–360°, stainless riser,with check valve

12 172.35

HI-I2506SSRB Adjustable arc, 50–360°, stainless riser,with check valve and reclaimed water ID logo cap

12 188.58



12 $354.85


12 375.12

Note: All I-25 model sprinklers are packaged with nozzles #7, 10, 15, 20 and 25.

rotors





hi-i4004ssB Adjustable arc, 50–360°, stainless riser, with checkvalve

12 $212.91

hi-i4004ssrB Adjustable arc, 50–360°, stainless riser, with checkvalve and reclaimed water ID logo cap

12 229.13

hi-i4004ssoNB Full-circle, with opposing nozzles, with stainless steelriser and check valve

12 243.32

HI-I4004SSONRB Full-circle, with opposing nozzles, with stainless riserand check valve and reclaimed water ID logo cap

12 259.55


hi-i4004sshsB High speed, adjustable arc, 50–360°, stainless riser,with check valve

12 $334.57


12 354.85


hi-i4006ssB Adjustable arc, 50–360°, stainless riser, withcheck valve

12 $243.32

hi-i4006ssrB Adjustable arc, 50–360°, stainless riser, with checkvalve and reclaimed water ID logo cap

12 259.55

hi-i4006ssoNB Full-circle, with opposing nozzles, with stainless steelriser and check valve

12 263.60

HI-I4006SSONRB Full-circle, with opposing nozzles, with stainless riser,with check valve and reclaimed water ID logo cap

12 279.82



12 $354.85


12 375.12


rotors




i-90, 8 cm (3") large Area Pop-up rotor with 8 nozzles and 1½" BSP inletCode description Qty/Box list Price

hi-i90AdVB Adjustable arc with check valve 6 $395.40

hi-i9036VB Full-circle with check valve 6 395.40

HI-I90ARV-B Adjustable arc with check valve and reclaimed waterID logo cap

6 405.54

HI-I903RV-B Full-circle with check valve and reclaimed water IDlogo cap

6 405.54

Note: All I-90 model sprinklers include a complete set of 8 nozzles. Nozzle No. 53 is factory installed.

rotor Accessories


HI-222700 Sub-surface stabilizer flange (I-25 and I-40 Rotors) 1 $10.14

HI-467955 Turf cup kit, converts I-90 sprinklers to turf cup model 1 141.94

HI-234200 Rubber cover kit, I-90-ADV* 1 141.94

HI-234201 Rubber cover kit, I-90–36V* 1 141.94

Note: *Rubber Cover Kit:I90-ADV: P/N HI-234200 (all)I90–36V: P/N HI-234200 (0711 date code and after)I90–36V: P/N HI-234201 (0611 date code and prior only)

rotors



st system: synthetic turf rotors and Component Accessories

st system kit Configurations (rotors and component accessories must be ordered individually from list that follows kits)kit Number kit description and included items

HI-STK1 stg-900 Block system (remotely located valve)STG-900-83 rotor, 473900 rubber cover kit, ST-173026-B vault, ST-2008-VA swing joint,HQ5RC quick coupler, 239300 & 239800 adapter fittings and 241400 BSP swing joint inlet adapter

HI-STK2 stg-900 VAh system (valve adjacent to head)STG-900-83 rotor, 473900 rubber cover kit, ST-173026-B vault, ST-2008-VA swing joint,ST-VBVF-K valve & fitting set, HQ-5RC-BSP quick coupler, 239800 adapter fitting and 241400BSP swing joint inlet adapter

HI-STK5V st-1600 Block system (remotely located valve)ST-1600B rotor, ST-IBS-1600 infill barrier system, ST-BKT-1600 rotor hanger bracket,ST-243636-B vault, ST-BVF30-K manifold kit, ST-H30-K inlet hose, ST-SPT-K support stand(2 required), 855000 BSP inlet adapter (if needed), 855100 BSP drain valve adapter (if needed)

HI-STK6V st-1600 VAh system (valve adjacent to head)ST-1600B rotor, ST-IBS-1600 infill barrier system, ST-BKT-1600 rotor hanger bracket,ST-243636-B vault, ST-BVF30-K manifold kit, ST-V30-KV control valve, ST-H30-K inlet hose,ST-SPT-K support stand (2 required), 855000 BSP inlet adapter (if needed), 855100 BSPdrain valve adapter (if needed) , HQ-5RC-BSP quick coupler

st rotors


HI-ST90B83 Pop-up, jar top, 40°-360° adjustable arc, 1 1/ 2” (40 mm)BSP inlet (does not fit ST173026B enclosure)

6 679.28

HI-STG90083 Pop-up, top service, 40°–360° adjustable arc, 1 ½” Acme inlet, for kits STK-1B and STK-2B

4 729.97

HI-ST1200BR Riser mount, 40°-360° adjustable arc, 1 1/2” (40 mm) BSP inlet 6 709.70

hi-st1600B Pop-up, top service, 40°-360° adjustable arc, 2” (50 mm) BSP inlet, for kits STK-5V, STK-6V (2” (50 mm) BSP inlet adapter included with ST-BVF30K fitting kit)

1 2,625.87

HI-ST1600HSB High Speed ST-1600B 1 2,625.87

HI-ST1600BR Riser mount, 40°-360° adjustable arc, 2” (50 mm) BSP inlet 6 1,520.78

HI-ST1600HSBR High Speed ST-1600BR 6 1,520.78

st Accessories


HI-STIBS1600 Infill Barrier System rubber cover kit for ST-1600-B Rotor 1 $354.85

HI-STBKT1600 Rotor vault hanger and grade adjustment bracket forST-1600B rotor (for STK-5V & STK-6V)

1 598.17

HI-ST173026A Composite vault, 2 x pre-cast Quick-Access ports andsub-covers (No rotor hole, NOT for STK-1B & STK-2B)

1 1,977.01

HI-ST173026B Composite vault, pre-cast holes for rotor & quickcoupler (for STK-1B & STK-2B)

1 1,875.62

HI-ST243636B Composite vault, pre-cast hole for rotor and 2 x quick accessports for quick coupler & remote on-off-autoselector (for STK-5V & STK-6V)

2 3,142.94

HI-ST2008VA VA swing joint, 5 cm PVC, 7 Acme pivot points(for STK-1B & STK-2B)

1 659.00

rotors



st Accessories (continued)


HI-STBVF30K Manifold valve and fitting kit: 3” (80 mm) ductile iron galvanized grooved fittings including 6 x grooved couplings, 3” (80 mm) grooved x 2” (50 mm) BSP rotor adapter fitting, 3 “ (80 mm) grooved x 1” (25 mm) NPT quick coupler point of connection adapter, 3” (80 mm) grooved x 3” (80 mm) NPT inlet adapter plus 3” (80 mm) ductile iron epoxy coated butterfly valve and 1” (25 mm) brass ball-valve drain-valve. (for STK-5V & STK-6V)

1 $2,423.10

HI-STH30K Ultra-flexible 3” (80 mm) x 26” (660 mm) stainlesssteel corrugated manifold inlet hose with stainless steelbraided outer support layer. (for STK-5V & STK-6V)

1 1,206.48

HI-STSPTK Adjustable manifold support stand - 2 required perSTK-5V, STK-6V (for STK-5V & STK-6V)

2 202.77

hi-stV30kV 80 mm control valve with ultra low loss and slowopening safety feature, grooved (Victaulic™ type)inlet/outlet fittings, 91 cm remotely located solenoid &on-off-auto selector manifold (for STK-6V)

1 3,031.41

HI-STVBVFK 1 ½” (40 mm) ICV-151G valve, manual ball valve, allconnecting fittings (for STK-2B)

1 506.93

HI-234200 ST90 rubber cover kit 1 141.94

HI-473900 STG900 rubber cover kit 1 233.19

HI-HQ5RCBSP Quick coupler, 1” (25 mm) BSP inlet, 1 ¼” (32 mm) outletfor key (HK55 key and HS1B/HS2B swivel sold separately)

10 225.07

st fittings


HI-239300 Connector between STG900 rotor and 239800 elbow (STK-1B)

1 $19.26

HI-239800 Elbow between ST2008VA swing joint and 239300connector (STK-1B). Also, elbow between STG900rotor and STVBVFK (STK-2B).

1 39.54

HI-239302 Connects ST90 BSP inlet rotor to ST2008VA swing joint (not used in kits)

1 19.26

HI-241400 Adapter, converts 2" pipe ST2008VA swing joint inletto 50 mm (2") MBSP threads

1 19.26

HI-855000 Stainless steel BSP manifold inlet adapter converts 3” (80 mm) NPT female inlet to 3” (80 mm) BSP female inlet (if needed)

1 192.63

HI-855100 BSP drain valve adapter nipple converts 1” (25 mm) female NPT threads to 1” (25 mm) male BSP threads (2 required - if needed)

1 79.08

st rotor tools


HI-517600 ST-1600B Service Tool, for removing gear drive frompop-up body

1 $117.61

rotors



Smart Approved WaterMarkCMYK Logo

CMYK100/50/0/30

CMYK56/0/0/0

MP rotator: Multi-stream rotor

MP800sr


hi-MP800sr90 MP800SR: Adjustable radius 1.5 m - 3.7 m,adjustable arc 90-210°, female threaded (orange)

10 $21.29

hi-MP800sr360 MP800SR: Adjustable radius 1.5 m - 3.7 m, 360°,female threaded (lime green)

10 21.29

MP1000


hi-MP100090 MP1000: Adjustable radius 2.5 m–4.6 m,adjustable arc 90–210°, female threaded (maroon)

10 $21.29

hi-MP1000210 MP1000: Adjustable radius 2.5 m–4.6 m,adjustable arc 210–270°, female threaded(lt. blue)

10 21.29

hi-MP1000360 MP1000: Adjustable radius 2.5 m–4.6 m,360°, female threaded (olive)

10 21.29

MP2000


hi-MP200090 MP2000: Adjustable radius 4.0 m–6.4 m,adjustable arc 90–210°, female threaded (black)

10 $21.29

hi-MP2000210 MP2000: Adjustable radius 4.0 m–6.4 m,adjustable arc 210–270°, female threaded (green)

10 21.29

hi-MP2000360 MP2000: Adjustable radius 4.0 m–6.4 m,360°, female threaded (red)

10 21.29

MP3000


hi-MP300090 MP3000: Adjustable radius 6.7 m–9.1 m,adjustable arc 90–210°, female threaded (blue)

10 $21.29

hi-MP3000210 MP3000: Adjustable radius 6.7 m–9.1 m,adjustable arc 210–270°, female threaded (yellow)

10 21.29

hi-MP3000360 MP3000: Adjustable radius 6.7 m–9.1 m,360°, female threaded (grey)

10 21.29

MP3500


hi-MP350090 MP3500: Adjustable radius 9.4 m–10.7 m, adjustablearc 90–210°, female threaded (tan)

10 $21.29

MP1000ht*


hi-MP1000ht90 MP1000: Adjustable radius 2.5 m–4.6 m,adjustable arc 90–210°, male threaded (maroon)

10 $25.35

hi-MP1000ht360 MP1000: Adjustable radius 2.5 m–4.6 m,360°, male threaded (olive)

10 25.35

Note: The MP1000HT210 lt. blue nozzle not available with male threads.

MP rotators




CMYK100/50/0/30

CMYK56/0/0/0

MP rotator: Multi-stream rotor

MP2000ht*


hi-MP2000ht90 MP2000: Adjustable radius 4 m–6.4 m,adjustable arc 90–210°, male threaded (black)

10 $25.35

hi-MP2000ht210 MP2000: Adjustable radius 4 m–6.4 m,adjustable arc 210–270°, male threaded (green)

10 25.35

hi-MP2000ht360 MP2000: Adjustable radius 4 m–6.4 m,360°, male threaded (red)

10 25.35

MP3000ht*


hi-MP3000ht90 MP3000: Adjustable radius 6.7 m–9.1 m,adjustable arc 90–210°, male threaded (blue)

10 $25.35

hi-MP3000ht210 MP3000: Adjustable radius 6.7 m–9.1 m,adjustable arc 210–270°, male threaded (yellow)

10 25.35

hi-MP3000ht360 MP3000: Adjustable radius 6.7 m–9.1 m,360°, male threaded (grey)

10 25.35

MP Corner


hi-MPCorNer MP Corner: Adjustable radius 2.5 m–4.5 m,adjustable arc 45–105°, female threaded (turquoise)

10 $21.29

MP strip


hi-MPlCs515 MP Left Corner Strip, 1.5 m x 4.5 m,female threaded (ivory)

10 $21.29

hi-MPrCs515 MP Right Corner Strip, 1.5 m x 4.5 m,female threaded (copper)

10 21.29

hi-MPss530 MP Side Strip, 1.5 m x 9.1 m,female threaded (brown)

10 21.29

MP Corner ht*


hi-MPCorNerht MP Corner: adjustable radius 2.5 m–4.5 m,adjustable arc 45–105°, male threaded (turquoise)

10 $25.35

MP strip ht*


hi-MPlCsht515 MP Left Corner Strip, 1.5 m x 4.5 m,male threaded (ivory)

10 $25.35

hi-MPrCsht515 MP Right Corner Strip, 1.5 m x 4.5 m,male threaded (copper)

10 25.35

hi-MPssht530 MP Side Strip, 1.5 m x 9.1 m,male threaded (brown)

10 25.35

Note: *Represents male threaded version.

MP rotators



MP rotator Accessories


hi-MPtool Adjustment tool, arc/radius 10 $2.13

hi-MP8sCreeN Very fine-MP800 1 0.51

hi-MPfsCreeN Fine-MP2000/MP1000 1 0.51

hi-MPCsCreeN Coarse-MP3000/MP3500 1 0.51

hi-MPtfsCreeN Fine-MP2000HT/MP1000HT 1 0.51

hi-MPtCsCreeN Coarse-MP3000HT 1 0.51

hi-MPstiCk 2-piece tool kit, arc/radius, decal included 1 7.60

hi-MPAdAPter Pressure gauge adapter, MP Rotator 1 5.47

HI-MPGAUGE Pressure gauge with adapter 1 101.39

10594 MPR to ACME Adaptor 1 4.62

for MP Quick Connector & MP riser see Page 100.

eco-rotator: rotary sprinkler Combination

Model eco-rotator, 10 cm (4") Pop-up sprinkler with integral MP Rotator nozzle and ½" inletCode description Qty/Box list Price

hi-eCo-04-1090 Eco-Rotator 10 cm (4") sprinkler with MP Rotator1000 90-210° (maroon)

50 $24.33

hi-eCo-04-2090 Eco-Rotator 10 cm (4") sprinkler with MP Rotator2000 90-210° (black)

50 24.33

hi-eCo-04-3090 Eco-Rotator 10 cm (4") sprinkler with MP Rotator3000 90-210° (blue)

50 24.33

hi-eCo-04-10360 Eco-Rotator 10 cm (4") sprinkler with MP Rotator1000 360° (olive)

50 24.33

hi-eCo-04-20360 Eco-Rotator 10 cm (4") sprinkler with MP Rotator2000 360° (red)

50 24.33

hi-eCo-04-30360 Eco-Rotator 10 cm (4") sprinkler with MP Rotator3000 360° (grey)

50 24.33

MP rotators



Ps ultra: sprays with Pre-installed Nozzle

Model Ps ultra, 5 cm (2") Pop-up sprays with pre-installed nozzle or flush plug and ½" inletCode description Qty/Box list Price

hi-Psu-02 with flush plug, no large screen 100 $5.37

hi-Psu-0210A 3.0 m (10') radius, adjustable arc (0–360°), no large screen 100 6.08




HI-PSU-025SS 1.5 m x 9.1 m, side strip, no large screen 100 6.08


hi-Psu-04 with flush plug, no large screen 100 $5.68

hi-Psu-0410A 3.0 m (10') radius, adjustable arc (0–360°) 100 6.08




hi-Psu-045ss 1.5 m x 9.1 m, side strip 100 6.08


HI-PSU-06 with flush plug, no large screen 100 $14.70

HI-PSU-0610A 3.0 m (10') radius, adjustable arc (0–360°) 100 16.73




Ps ultra Accessories


hi-162900 PS Ultra replacement filter screen (fits 10 cm and 15 cm bodies)

1 $1.12

hi-462237 PS Ultra drain check valve, field installed, bag of 25,(available for 10 cm and 15 cm bodies only)

1 45.62

sprays & Nozzles



Pro-spray®: residential/Commercial sprays

Pro-spray sprinkler Bodies with ½" inletCode description Qty/Box list Price

hi-Pros-00 Shrub adapter, fits onto ½" NPT riser, female thread 25/250 $2.23

hi-Pros-02 5 cm (2") pop-up spray body, accepts femalethread nozzles

50 7.20

hi-Pros-03 7.5 cm (3") pop-up spray body, accepts femalethread nozzles

50 7.20


50 7.20


25 24.33


25 32.44

HI-PROS-06-NSI 15 cm (6”) pop-up spray body, no side inlet model,accepts female thread nozzles

25 17.84

HI-PROS-12-NSI 30 cm (12”) pop-up spray body, no side inlet model,accepts female thread nozzles

25 26.36

HI-PROS04CV 10 cm (4") pop-up spray body with check valve,accepts female thread nozzles

50 11.56

HI-PROS06CV 15 cm (6") pop-up spray body with check valve,no side inlet model, accepts female thread nozzles

25 26.36

HI-PROS12CV 30 cm (12") pop-up spray body with check valve,no side inlet model, accepts female thread nozzles

25 36.50

HI-PROS00R Shrub adapter, fits onto ½" NPT riser, female thread,reclaimed water version

25/250 4.36

HI-PROS04CVR 10 cm (4") pop-up spray body with check valve,no side inlet model, accepts female thread nozzles,with reclaimed water body cap

50 20.28


25 36.50


25 44.61

hi-ProsrCCAP Snap-on reclaimed water identification cap, fitsPro-Spray and PRS30

1 2.13

hi-458520 Reclaimed water thread-on body cap, Pro-Spray 1 8.01

HI-458525 Reclaimed water thread-on body cap, Pro-Spraywith check valve ID

1 8.01

HI-213600 Shut off cap for PROS/INST, thread-on - Bag of 5 20.28

HI-437400 Drain check valve, 3 m (10’) for all pop upPro-Spray models

1 2.03

sprays & Nozzles



Pro-spray® Prs30: 2.1bar (210 kPa) Pressure reg. Commercial sprays

Pro-spray Prs30 sprinkler Bodies with ½" inlet (brown cap)Code description Qty/Box list Price

hi-Pros-00-Prs30 Pressure regulated shrub adapter, fits onto ½"NPT riser, accepts standard female threadednozzles

25/250 $12.06

hi-Pros-04-Prs30 10 cm (4") pop-up spray body with pressureregulator, accepts female threaded nozzles

50 15.41


25 36.50


25 44.61

HI-PROS-06-NSI-PRS30 15 cm (6”) pop-up spray body with pressureregulator, no side inlet model, accepts femalethreaded nozzles

25 32.44

HI-PROS-12-NSI-PRS30 30 cm (12”) pop-up spray body with pressureregulator, no side inlet model, accepts femalethreaded nozzles

25 40.55

HI-PROS-04-PRS30-CV 10 cm (4") pop-up spray body with pressureregulator and check valve, no side inlet model,accepts female thread nozzles

50 20.28

hi-Pros-06-Prs30-CV 15 cm (6") pop-up spray body with pressure regulatorand check valve, accepts female thread nozzles

25 40.55

hi-Pros-12-Prs30-CV 30 cm (12") pop-up spray body with pressureregulator and check valve, accepts female threadnozzles

25 50.69

HI-PROS-00-PRS30-R Pressure regulated shrub adapter, fits onto ½"NPT riser, reclaimed water body, accepts standardfemale threaded nozzles

25/250 16.83

HI-PROS-04-PRS30-CV-R 10 cm (4") pop-up spray body with check valve,no side inlet model, accepts female thread nozzles,with reclaimed water body cap

50 28.39


25 50.69


25 62.86

HI-458560 Pro-Spray PRS30 reclaimed water thread-on bodycap with check valve ID

1 8.01

hi-ProsrCCAP Snap-on reclaimed water identification cap, fits allPro-Spray bodies

1 2.13

HI-PROSPRS30VPC Pro-Spray PRS30 brown vandal proof cap 1 8.11

HI-437400 Drain check valve, 3 m (10’) for all pop upPro-Spray models

1 2.03

sprays & Nozzles



Pro-spray® Prs40: 2.8bar (280 kPa) Pressure reg. Commercial sprays

Pro-spray Prs40 sprinkler Bodies with ½" inlet (grey cap)Code description Qty/Box list Price

hi-Pros-00-Prs40 Pressure regulated shrub adapter, fits onto ½" NPTriser, accepts standard female threaded nozzles

25/250 $12.06

hi-Pros-04-Prs40-CV 10 cm (4") pop-up spray body with pressure regulatorand check valve, accepts female threaded nozzles

50 20.28


25 40.55


25 50.69

hi-Pros-00-Prs40-r Pressure regulated shrub adapter, fits onto ½" NPTriser, reclaimed water body, accepts standard femalethreaded nozzles

25/250 16.83

HI-PROS-04-PRS40-CV-R 10 cm (4") pop-up spray body with pressure regulatorand check valve, accepts female threaded nozzles,with reclaimed water body cap

50 28.39

HI-PROS-06-PRS40-CV-R 15 cm (6") pop-up spray body with pressureregulator and check valve, accepts female threadednozzles, with reclaimed water body cap

25 50.69

HI-PROS-12-PRS40-CV-R 30 cm (12") pop-up spray body with pressureregulator and check valve, accepts female threadednozzles, with reclaimed water body cap

25 62.86

HI-458562 Pro-Spray PRS40 reclaimed water thread-on bodycap with check valve ID

1 8.01

hi-ProsrCCAP Snap-on reclaimed water identification cap, fits allPro-Spray bodies

1 2.13

spray Nozzles

Pro-Adjustable Nozzles*, female threadCode description Qty/Box list Price

hi-4A 1.2 m (4') radius adjustable arc nozzle (0–360°) 25/250 $3.55

hi-6A 1.8 m (6') radius adjustable arc nozzle (0–360°) 25/250 3.55






Adjustable Arc stream Nozzles*, female threadCode description Qty/Box list Price

hi-s8A 2.4 m (8') adjustable arc stream spray nozzle 25/250 $3.55

hi-s16A 4.9 m (16') adjustable arc stream spray nozzle 25/250 3.55

sprays & Nozzles



Pro-spray® fixed Arc Nozzles*, female threadCode description Qty/Box list Price

hi-5Q, hi-5h, hi-5f 1.5 m (5') radius fixed arc nozzle 25/250 $3.55

hi-8Q, hi-8t, hi-8h, hi-8f

2.4 m (8') radius, fixed arc nozzle 25/250 3.55

hi-10Q, hi-10t, hi-10h, hi-10f


hi-12Q, hi-12t, hi-12h, hi-12tt, hi-12tQ, hi-12f


hi-15Q, hi-15t, hi-15h, hi-15tt, hi-15tQ, hi-15f


hi-17Q, hi-17h 5.2 m (17') radius, fixed arc nozzle 25/250 3.55

short radius fixed Arc Nozzles*, female threadCode description Qty/Box list Price

hi-2Q, hi-2h 0.6 m (2’) radius, fixed arc nozzle 25/250 $3.55



specialty spray Pattern Nozzles*, female threadCode description Qty/Box list Price

hi-Cs530 1.5 m x 9.1 m (5' x 30’) centre strip nozzle 25/250 $3.55

hi-es515 1.5 m x 4.5 m (5’ x 15’) end strip nozzle 25/250 3.55

hi-lCs515 1.5 m x 4.5 m (5’ x 15’) corner strip nozzle, left 25/250 3.55

hi-rCs515 1.5 m x 4.5 m (5’ x 15’) corner strip nozzle, right 25/250 3.55

hi-ss530 1.5 m x 9.1 (5’ x 30’) side strip nozzle 25/250 3.55

hi-ss918 2.7 m x 5.5 (9’ x 18’) side strip nozzle 25/250 3.55

Note: *All nozzles include filter screen.

filter screens

spray Nozzle filter screen


HI-464716 Replacement filter screen for spray nozzles,grey (fine mesh) - Bag of 25

$8.62

HI-464717 Replacement filter screen for spray nozzles,black (coarse mesh) - Bag of 25

8.62

sprays & Nozzles



Bubblers and Bubbler Nozzles

Model PCN, pressure compensating bubbler nozzles "flood pattern," female threadedCode description Qty/Box list Price

hi-PCN25 Pressure compensating bubbler nozzle,1 l/m (0.25 GPM)

25/250 $5.27


25/250 5.27


25/250 5.27


25/250 5.27

Model MsBN, Multi-stream Pressure Compensating Bubbler Nozzles 30 cm (12") radius, "spider" pattern, female threadedCode description Qty/Box list Price

hi-MsBN25Q Multi-stream spider bubbler nozzle,1 l/m (0.25 GPM) quarter

25/250 $7.30

hi-MsBN50h Multi-stream spider bubbler nozzle,2 l/m (0.50 GPM) half

25/250 7.30

hi-MsBN10f Multi-stream spider bubbler nozzle,4 l/m (1.0 GPM) full

25/250 7.30

hi-MsBN50Q Multi-stream spider bubbler nozzle,2 l/m (0.50 GPM) quarter

25/250 7.30

hi-MsBN10h Multi-stream spider bubbler nozzle,4 l/m (1.0 GPM) half

25/250 7.30

hi-MsBN20f Multi-stream spider bubbler nozzle,8 l/m (2.0 GPM) full

25/250 7.30

Model Cst, dual stream strip Pattern Bubbler Nozzles, 1.5 m (5') radius, female threadCode description Qty/Box list Price

hi-5CstB 1.5 m (5') radius, center stream bubbler nozzle,2 l/m (0.50 GPM)

25/250 $3.55

Model PCB, Pressure Compensating Bubbler, ½" thread "flood pattern"Code description Qty/Box list Price

hi-PCB25 Pressure compensating bubbler ½" thread,1 l/m (0.25 GPM)

25/250 $10.95


25/250 10.95

HI-PCB10 Pressure compensating bubbler ½" thread,4 l/m (1.0 GPM)

25/250 10.95


25/250 10.95

Note: Available in reclaimed purple option. Add "-R" to the Model.

Model AfB, Adjustable flood Bubbler, ½" thread "flood pattern," adjustment screwCode description Qty/Box list Price

hi-AfB Adjustable flood bubbler ½" thread, maximum flow8 l/m (2.0 GPM), pressure compensating

25/250 $8.31

Note: All Bubbler Nozzles include filter screen.

sprays & Nozzles



1” PgV: Professional grade Valves


hi-PgV100gB 25 mm (1") plastic globe valve, without flowcontrol, female BSP inlet and outlet

20 $43.09

HI-PGV100MMB 25 mm (1") plastic globe valve, without flowcontrol, male BSP inlet and outlet

20 43.09

hi-PgV101gB 25 mm (1") plastic globe valve, with flow control,female BSP inlet and outlet

20 45.62

HI-PGV101MMB 25 mm (1") plastic globe valve, with flow control,male BSP inlet and outlet

20 45.62

HI-PGV100AB 25 mm (1") plastic angle valve, without flow control,female BSP inlet and outlet

20 66.91

HI-PGV101AB 25 mm (1") plastic angle valve, with flow control,female BSP inlet and outlet

20 67.42

hi-269205 Reclaimed water ID Handle for PGV101 Series 1 4.06

hi-458200 DC latching solenoid for all Hunter valves 1 64.89

Note: For PGV with factory installed DC latching solenoid, specify -DC and add $46.64 to the list price ofthe valve.

1” PgV Jar-top: Professional grade Valves with Jar-top Bonnet


hi-PgV100JtgB 25 mm (1") plastic globe valve, jar-top bonnet,without flow control, female BSP inlet and outlet

20 $43.09

hi-PgV101JtgB 25 mm (1") plastic globe valve, jar-top bonnet, withflow control, female BSP inlet and outlet

20 45.62

HI-PGV100JTMMB 25 mm (1") plastic globe valve, jar-top bonnet,without flow control, male BSP inlet and outlet

20 43.09

HI-PGV101JTMMB 25 mm (1") plastic globe valve, jar-top bonnet, withflow control, male BSP inlet and outlet

20 45.62

hi-269205 Reclaimed water ID handle for PGV101 Series 1 4.06



PgV 1½” & 2” Valves


hi-PgV151B 40 mm (1½") plastic combination globe/angle valve,with flow control, BSP inlets

8 192.63

hi-PgV201B 50 mm (2") plastic combination globe/angle valve,with flow control, BSP inlets

8 273.74

HI-607105 Reclaimed water ID handle for PGV151-201 Series 1 4.06

hi-ACCu-syNC For model information, see page 79. N/A N/A



Valves



iCV: institutional Commercial Valves


hi-iCV101gB 25 mm (1") glass-filled nylon, 15 bar (220 PSI) globevalve, with flow control

12 $233.19

hi-iCV101gBfs 25 mm (1") glass-filled nylon, 15 bar (220 PSI) globevalve, with flow control and filter sentry™ option

12 354.85

hi-iCV151gB 40 mm (1½") glass-filled nylon, 15 bar (220 PSI) globevalve, with flow control

8 304.16

hi-iCV151gBfs 40 mm (1½") glass-filled nylon, 15 bar (220 PSI) globevalve, with flow control and filter sentry™ option

8 425.82

hi-iCV201gB 50 mm (2") glass-filled nylon, 15 bar (220 PSI) globevalve, with flow control

8 425.82

hi-iCV201gBfs 50 mm (2") glass-filled nylon, 15 bar (220 PSI) globevalve, with flow control and filter sentry™ option

8 547.48

hi-561205 Reclaimed water ID handle for ICV101-201 Series 1 4.06

hi-iCV301B 80 mm (3") glass-filled nylon, 15 bar (220 PSI)globe/angle valve, with flow control

1 892.19

hi-iCV301Bfs 80 mm (3") glass-filled nylon, 15 bar (220 PSI) globe/an-gle valve, with flow control and filter sentry™ option

1 1,094.96

hi-515005 Reclaimed water ID handle for ICV301 Series 1 4.06

hi-ACCu-syNC For model information, see next page. N/A N/A



iBV: hunter Brass Valves


HI-IBV101GBFS 25 mm (1") BSP brass globe valve, with flow control,with factory installed Filter Sentry™ diaphragm

4 $476.51

HI-IBV151GBFS 40 mm (1½") BSP brass globe valve, with flowcontrol, with factory installed Filter Sentry™diaphragm

2 841.50


2 871.91


1 2,271.02

HI-700392 Reclaimed water ID tag for all IBV valves (Included onFilter Sentry™ models)

1 5.07

hi-ACCu-syNC For model information, see next page. N/A N/A


Valves



Accu-sync


hi-ACCusyNCAdJ Accu-Sync Pressure Regulator, adjustable pressuremodel 1.4–7 bar (20–100 PSI), works with anyHunter valve

1 $172.35

hi-ACCusyNC20 Accu-Sync Pressure Regulator, fixed pressure 1.4 bar(20 PSI) model, works with any Hunter valve

1 145.99


1 145.99


1 145.99


1 145.99


1 145.99

drip Control zone kit

ships assembled for immediate installation


HI-PCZ10125B 1" BSP Drip Zone Control Kit with PGV flow controlvalve 1.7 bar (25 PSI) regulator

1 $152.08

HI-PCZ10140B 1" BSP Drip Zone Control Kit with PGV flow controlvalve 2.8 bar (40 PSI) regulator

1 152.08

hi-269205 Reclaimed water ID handle for PGV101 Series 1 4.06

HI-HY-075 3/4” NPT WYE filter with 150 mesh stainless stell screen

1 42.07

hi-hfr07525 Pressure regulating filter, ¾" inlet and outlet, 25 PSIregulation

1 81.11

hi-hfr07540 Pressure regulating filter, ¾" inlet and outlet, 40 PSIregulation

1 81.11

Valves



hCV: hunter Check Valves


hi-hC50f50f ½" female inlet and ½" female outlet 40 $14.19

hi-hC50f50M ½" female inlet and ½" male outlet 40 14.19

hi-hC75f75M ¾" female inlet and ¾" male outlet 40 16.22

Valve Accessories


hi-458200 DC latching solenoid for all Hunter plastic valves 1 $64.89

HI-464322 Solenoid conduit covers 10 62.86

hi-434100 24VAC Solenoid Coil for all Hunter Plastic Valves 1 26.36

Valves



FLOW

FLOW

Mini Pressure regulators

flow rates up to 19 lPM


MrdC Mini Regulator Drain Check (Brown)Specify Pressure 20, 30, 35, 40, 45 or 50 PSI.

150 $17.04

Mr Mini Regulator (Grey)Specify Pressure 20, 30, 35, 40, 45 or 50 PSI.

150 15.48

MdC Mini Drain Check (Green)Specify Pressure 20 or 30 PSI.

150 14.05

universal-flo landscape regulator

flow rates up to 57 lPM


Pr20 20mm Universal-Flo Landscape Regulator 50 $25.79

Pr25 25mm Universal-Flo Landscape Regulator 50 27.62

Mini Regulator (MR)

Mini Drain check (MDc)

Mini Regulator Drain check (MRDc)

Thread configuration

pressure (kpa) p/n option p/n

holdback elevation

pressure (kpa) p/n

holdback elevation

15mm FBSP

x

15mm MBSP

138 11146-020 MDC20 11154-020 10.7m 138 11150-020 6.1m

207 11146-030 MDC35 11154-035 18.3m 207 11150-030 10.7m

276 11146-040 276 11150-040 13.4m

345 11146-050 345 11150-050 20.4m

15mm MBSP

x

15mm MBSP

138 11148-020 MDC20 11156-020 10.7m 138 11152-020 6.1m

207 11148-030 MDC35 11156-035 18.3m 207 11152-030 10.7m

276 11148-040 276 11152-040 13.4m

345 11148-050 345 11152-050 20.4m

universal-Flo landscape Regulator

Thread configuration

pressure (kpa) p/n

PR20

20mm FBSP

x

20mm FBSP

138 10895-020

172 10895-025

207 10895-030

276 10895-040

345 10895-050

PR25

25mm FBSP

x

25mm FBSP

138 11420-020

172 11420-025

207 11420-030

276 11420-040

345 11420-050

Pressure regulators



hQ: Quick Coupling Valves


hi-hQ3rC ¾" female inlet, 2 slots, 1 piece body, yellow lid 10 $129.77

HI-HQ33DRC ¾" female inlet, 2 slots, 2 piece body, yellow lid 10 158.16

HI-HQ33DLRC ¾" female inlet, 2 slots, 2 piece body, yellow locking lid 10 188.58

HI-HQ33DLRCR* ¾" female inlet, 2 slots, 2 piece body, purple locking lid 10 194.66

HI-HQ5RCBSP 1" female BSP inlet, 2 slots, 1 piece body, 1¼" keywayoutlet, yellow lid

10 225.07

HI-HQ5LRCBSP 25 mm (1") female BSP inlet, 2 slots, 1 piece body,30 mm (1¼") keyway outlet, yellow locking lid

10 235.21

HI-HQ5LRCBSPR* 25 mm (1") female BSP inlet, 2 slots, 1 piece body,30 mm (1¼") keyway outlet, purple locking lid

10 235.21

HI-HLK Locking key for locking lids 10 22.30

Note: *Models with purple locking lids are suitable for use on reclaimed water sites.

hk: Quick Coupling keys


hi-hk33 ¾" single lug inlet, combination ¾" male / ½" female outlet

10 $87.19

hi-hk55 1¼" single stainless lug inlet, 1" NPT male outlet 10 200.74

hQ: Quick Coupling swivels


hi-hs1B 25 mm (1") inlet, 20 mm (¾") BSP outlet 10 $150.05

hi-hs2B 25 mm (1") inlet, 25 mm (1") BSP outlet 10 150.05

Valves



x-Core Controller - indoor

residential Controllers - indoor Mount


hi-xC401iA 4-station indoor controller, 230 VAC transformer,Australian plug

10 $196.69


10 223.05


10 263.60

x-Core Controller - outdoor

residential Controllers - outdoor Mount


hi-xC401A 4-station outdoor cabinet controller, 230 VACinternal transformer, Australian plug/cord

10 $263.60


10 304.16


10 364.99

xC hybrid Controller

residential/light Commercial Controller (Battery-Powered)


hi-xCh600 6-station indoor/outdoor controller,battery-powered

10 $405.54

hi-xCh600ss 6-station outdoor controller, battery-powered, stainless steel cabinet

1 1,105.10

hi-xCh1200 12-station indoor/outdoor controller,battery-powered

10 588.03

hi-xCh1200ss 12-station outdoor controller, battery-powered,stainless steel cabinet

1 1,368.70

hi-458200 DC latching solenoid for all Hunter plastic valves 1 64.89

HI-XCHSPOLE Mounting pole 1.2 m (4') for stainless XC Hybrid 1 405.54

HI-XCHSPB Bracket and hardware for pole mount 1 324.43

hi-sPxCh Solar Panel Kit for XCH Controllers 1 364.99

Controllers



Pro-C Controller (Conventional)

residential/light Commercial Controller - outdoor Mount


hi-PCC601A 6-station controller, outdoor mount with 230 VACinternal transformer, Australian plug/cord

8 $415.68

hi-PCC1201A 12-station controller, outdoor mount with 230 VACinternal transformer, Australian plug/cord

8 588.03

hi-526200 Pro-C (PCC Series) front panel assembly 1 162.22

HI-526205 Pro-C/FX Lighting front panel assembly 1 182.49

HI-PXSYNC Control relay for use in PX lighting transformers 1 119.63

Pro-C Controller

residential/light Commercial Controller


hi-PC401iA 4-station base unit controller, indoor mount with230 VAC external transformer, Australian plugexpandable to 16 stations

8 $324.43

hi-PC401A 4-station base unit controller, outdoor mount with230 VAC internal transformer, Australian plug/cordexpandable to 16 stations

8 385.26

hi-526200 Pro-C front panel assembly 1 162.22

HI-526205 Pro-C/FX Lighting front panel assembly 1 182.49

HI-PXCSYNC Control relay for use in PX lighting transformers 1 119.63

hi-PCM300 3-station module for Pro-C controller 20 107.47

hi-PCM900 9-station module for Pro-C controller, for specific usein expanding controller to 15 stations

6 405.54

Pro-C Quick reference Chart

desired station Config. order Base unit Plus Number of Modules specify as:

4-Zone PC-401 no module needed PC-401

7-Zone PC-401 one PCM-300 PC-701

10-Zone PC-401 two PCM-300 PC-1001

13-Zone PC-401 three PCM-300 PC-1301

16-Zone PC-401 one PCM-300 & one PCM-900 PC-1601

Controllers



i-Core Controller

Commercial Controller


hi-iC601Pl 6-station base international model with outdoorplastic cabinet, expands up to 30 stations withICM-600s

1 $871.91

hi-iC601PlC 6-station base international model with outdoor plastic cabinet, expands up to 30 stations with ICM-600s, Australian plug/cord

1 926.24

hi-iC600M 6-station base model with metal cabinet, expands upto 42 stations with ICM-600s

1 1,743.82

HI-IC600SS 6-station base model with stainless steel cabinet,expands up to 42 stations with ICM-600s

1 2,940.17

HI-IC600PP 6-station base model with plastic pedestal, expandsup to 42 stations with ICM-600s. Also available in tan colour, add -TAN when ordering

1 6,103.38

hi-iCM600 6-station module, for adding stations to basecontroller

1 223.05

HI-ACCPED Metal pedestal for use with I-Core and ACC controllers

1 1,318.01

HI-PEDSS Stainless steel pedestal for use with stainless I-Coreand ACC controllers

1 1,987.15

hi-hfs Hunter Flow-Sync sensor for use with any I-Coreand ACC controllers (use FCT sensor tee fittings forinstallation in lines from 25 mm to 100 mm,see page 93)

1 598.17

geNdAtfl Flow Sensor Brass 2" MNPT for flow sensing in pipelines larger than 100mm

1 2,020.00

duAl decoder

decoder system for i-Core Controllers


hi-duAl48M 48-station decoder output module for I-Core controller

1 $892.19

hi-duAl1 1-station decoder for use with I-Core DUAL controller, includes 2 waterproof connectors

1 233.19

hi-duAl2 2-station decoder for use with I-Core DUAL controller, includes 2 waterproof connectors

1 401.48

hi-duAls Surge Suppression module for use with I-CoreDUAL controller

1 182.49

i-Core duAl

Commercial Controller with dual decoder system fitted


hi-iC48duAl I-Core 48 Station Decoder Control, Plastic Cabinet 1 1,652.58

hi-iC48duAlC I-Core 48 Station Decoder Control, Plastic Cabinet, Australian plug/cord

1 1,706.90

HI-IC48DUALPP I-Core 48 Station Decoder Control, Plastic Pedestal 1 6,884.04

for decoder system Cable & Connectors see Page 88.

Controllers



ACC: Advanced Commercial Controller

With real time flow sensing Capability


hi-ACC1200 12-station base model with outdoor metal cabinet,expands up to 42 stations with ACM- or AGM-600s

1 $2,777.95

HI-ACC1200SS 12-station base model with stainless steel metalcabinet, expands up to 42 stations

1 3,903.32

hi-ACC1200PP 12-station base model in an outdoor plastic pedestal,expands up to 42 stations with ACM- or AGM-600s. Also available in tan colour, add -TAN when ordering

1 7,218.61

hi-ACM600 6-station module to add stations to any ACC 1 841.50

hi-AgM600 6-station module with heavy duty surge protection 1 902.33

HI-ACCPED Metal pedestal for use with ACC controllers 1 1,318.01


1 1,987.15

hi-hfs Hunter Flow-Sync sensor for use with any ACC & I-Core con-trollers (use with FCT sensor tee fittings for installation in lines from 25 mm to 100 mm, see page 93)

1 598.17

geNdAtfl Flow Sensor Brass 2" MNPT for flow sensing in pipelines larger than 100mm

1 2,020.00

ACC Communications Components & Accessories


HI-ACCCOMHWR Communications module for radio and/or hardwireonly (requires ACC-HWIM and/or radio module)

1 $1,257.17

HI-ACCCOMPOTS Communications module for dial-up telephone modem (also supports on-site radio and/or hardwirewith ACC-HWIM and/or radio module)

1 2,098.67

HI-ACCCOMLAN Communications module for Ethernet, also supports on-site radio and/or hardwire with ACC-HWIM and/or radio module

1 2,098.67

HI-ACCCOMGPRSE Communications module for GPRS cellular, also supports on-site radio and/or hardwire with ACC-HWIM and/or radio module

1 3,954.02

HI-ACCHWIM Hardwire interface module, required for hardwire connections 1 486.65

hi-gCBl100 30 m (100') GCBL cable for hardwired communications 1 415.68

hi-gCBl300 90 m (300') GCBL cable for hardwired communications 1 1,155.79

HI-GCBL500 150 m (500') GCBL cable for hardwired communications 1 1,824.93

HI-RAD3 UHF radio, 450-470 MHz range, for on-site radio communications, license required.

1 3,568.75

HI-RAD460INT UHF radio, 440-480 MHz range, for ACC communications 1 3,568.75

HI-RAD430INT UHF Radio, 400-440 MHz, for international ACC communications

1 3,568.75

HI-RAD150INT VHF radio, 146-174 MHz, for international ACC communications

1 3,568.75

HI-IMMSANT2 UHF radio antenna for plastic pedestal lid (450-470 MHz)

1 993.57

HI-IMMSANT3 UHF radio antenna. wall mount, general purpose(450-470 MHz)

1 963.16

HI-IMMSANTYAGI3 UHF radio antenna, directional (450-470 MHz) 1 963.16

HI-APPBRKT Communications module bracket for plastic pedestal(not required for wall mount controllers)

1 261.57

HC-GSMANT GSM antenna for ACCCOMGSME and ACCCOMGPRSE modules with MMCX connector

1 273.00

Note: *A data contract between NICA and the End User will need to be established forHI-ACCCOMGPRSE Communication

Controllers



gPrs Cellular data


Wl-siM01 WGN-NL SIM - Option 1 PoA

Wl-siM02 Everything Everywhere SIM - Option 2 PoA

Wl-oPt1siM Data Plan Per Controller P.A. PoA

Wl-oPt1oPu Over Plan Usage Per MB PoA

Wl-oPt2siM Data Plan Per Controller P.A. PoA

Wl-oPt2oPu Over Plan Usage Per MB PoA

ACC decoder: Advanced Commercial Controller 2-Wire decoder Version


hi-ACC99d ACC decoder controller, 99 station capacity,grey powder-coated metal wall mount

1 $4,744.82

HI-ACC99DSS ACC decoder controller, 99 station capacity,stainless steel wall mount

1 5,799.22

HI-ACC99DPP ACC decoder controller, 99 station capacity,plastic pedestal

1 9,489.64

HI-ACCPED Metal pedestal for use with ACC controllers 1 1,318.01


1 1,987.15

hi-iCd100 1-station decoder for use with any ACC decodercontroller, includes 2 waterproof connectors

1 253.46


1 456.23


1 527.20


1 871.91

hi-iCdseN Sensor decoder for use with any ACC decodercontroller, includes 2 waterproof connectors

1 1,176.07

hi-AdM99 ACC decoder module only 1 2,392.69

for decoder system Cable & Connectors see Next Page.

iCd-hP

handheld decoder Programmer for iCd decoders


hi-iCdhP Handheld decoder programmer for ICD decoders 1 $2,412.96

Controllers



decoder Controller Cables

for hunter ACC, duAl & Pilot


hC-id1Blu 500m Roll 2.1mm2 (#14AWG) Jacketed Twin TwistedDecoder Cable

1 $1,915.00

hC-id1Blu100 100m Roll 2.1mm2 (#14AWG) Jacketed Twin TwistedDecoder Cable

1 416.00

HC-ID1CABLE 500m Roll 2.1mm2 (#14AWG) Decoder Cable available in various colours (Min order 5000m)

1 PoA

hC-id2Blu 500m Roll 3.3mm2 (#12AWG) Jacketed Twin TwistedDecoder Cable

1 2,583.00

HC-ID2CABLE 500m Roll 3.3mm2 (#12AWG) Decoder Cable available in various colours (Min order 8000m)

1 PoA

Cable Connectors



hC-WCdBry6 3M DBR/Y Wire Connector Kit 600V for Two-Wire Path(DBR/Y kit replaces DBY, DBR, DBY-6 & DBR-6 kits)

100 $4.33

hC-WCMgC 3M MGC Wire Connector 1.3-2.1mm2 Cables 25 2.90

hC-WC316ir 3M #316IR Wire Connector 0.5-1.3mm2 Cables(316IR replaces 314 & 316)

30 2.39

earth grounding & Control



hC-dCfd2 DCFD - 2 Way Decoder Cable Fuse Device 5 $310.70

hC-dCfd3 DCFD - 3 Way Decoder Cable Fuse Device 5 397.32

hC-gr096 Decoder Grounding Rod 5/8 x 8' with 4.5m x 5.3mm2

(#10AWG) insulated wire1 137.45

hC-gP036 Decoder Grounding Plate 4" x 36" with 3m x 5.3mm2


hC-gP096 Controller Grounding Plate 4" x 96" with 7m x 13.3mm2


hC-gPset Powerset Earth Contact Backfill 22.7kg bag 1 382.31

Cable, Connectors & earthing



Node

Battery operated Controller


hi-Node100 Single-station battery controller with solenoid 1 $253.46

hi-Node100VAlVeB Node-100 installed on PGV-101-GB 10 277.79

hi-Node200 2-station battery controller. No solenoid 1 334.57



hi-sPNode Solar Panel Kit for Node Controllers 1 364.99


Node kit

Controller, Valve, Manifold, Cap & Cable Joiner


hC-Node2kit 2 Station Node Controller Kit $566.76

HI-NODE200 2 Station Node Controller 1

HI-PGV101GBDC PGV 25mm Solenoid, 12VDC 2

LAS-1301-210 2-Outlet Manifold 1

LAS-1348-010 25 mm Lasco Cap 1

HC-WC316IR 316 Cable Joiner 4

hC-Node4kit 4 Station Node Controller Kit $861.05






hC-Node6kit 6 Station Node Controller Kit $1,150.26







Wireless Valve system

Multi-station Battery operated Controller and Programmer


hi-WVP Wireless Valve System handheld radio programmer 1 $790.80

hi-WVC100 Wireless Valve System single-station controllermodule, solenoid not included

1 517.06

hi-WVC200 Wireless Valve System two-station controller module,solenoids not included

1 608.31

hi-WVC400 Wireless Valve System four-station controllermodule, solenoids not included

1 689.42

Note: Wireless Valve Systems suitable for Australia. Operates on 900 MHz ISM Band.

Battery Controllers



roAM xl

remote Control system


hi-roAMxlkit Complete Remote Kit: transmitter, receiver, harnessand carrying case works with all X-Core, Pro-C,I-Core, and ACC controllers

1 $1,824.93

hi-roAMxlr ROAM XL Remote receiver only 1 942.88

hi-roAMxltr ROAM XL Remote transmitter only 1 1,257.17

HI-ROAMXLCASE Empty case with foam cutout for ROAMXL-KIT 1 162.22

HI-ROAMSCWH Wiring harness, 7.6 m (25') shielded cable 80 42.58

hi-roAM-Wh Wiring harness, 1.8 m (6') 1 20.28

hi-258200 Wall Mount for SmartPort 1 6.08

Note: System Operating Frequency: 27 MHz. Please check for local regulatory approvals.

roAM

residential remote Control system


hi-roAMkit Complete Kit: transmitter, receiver and wiringharness compatible with all X-Core, Pro-C, I-Core,and ACC controllers

1 $577.89

hi-roAMtr Handheld transmitter only 1 334.57

hi-roAMr Receiver unit only 1 294.02

HI-ROAMSCWH Wiring harness, 7.6 m (25') shielded cable 80 42.58

hi-roAM-Wh Wiring harness, 1.8 m (6') 1 20.28

hi-258200 Wall Mount for SmartPort 1 6.08

Note: System Operating Frequency: 433.925 MHz. Please check for local regulatory approvals.

Psr: Pump start relay


hi-Psr22 Double pole/single throw pump start relay for 230 VAC pumps up to 3.5 HP

10 $243.32

HI-PSR52 Double pole/single throw pump start relay for 230 VAC pumps up to 7.5 HP

10 314.29

HI-PSR53 Triple pole/single throw pump start relay for 230 VAC pumps up to 7.5 HP or 230 VAC 10 HP (three phase)

10 567.76

HI-PSRB Used to boost controller output power available tooperate larger pump start relays if required

8 608.31

remote Controllers



iMMs: irrigation Management and Monitoring system


HI-IMMS4CD IMMS Central Control Software with Graphics forMicrosoft® Windows® XP or later operating systems

1 $10,493.35

HI-IMMSETCD ET software add-on for IMMS (requires base versionIMMS also)

1 2,200.05

hi-etseNsor ET Sensor only, for use with ACC in IMMS-ETSystems

1 679.28

hi-etWiNd Optional anemometer for use with the ET Sensor 1 1,105.10

HI-IMMSCCCA IMMS hardwired central communications unit 1 1,267.31

for Communications Accessories see Page 86.

Central Controls




CMYK100/50/0/30

CMYK56/0/0/0


CMYK100/50/0/30

CMYK56/0/0/0


CMYK100/50/0/30

CMYK56/0/0/0

Mini-Clik

rain sensor


hi-MiNiClik Adjusts for rainfall of 3 mm (0.1”) to 25 mm (1.0”),includes 7.6 m (25') wire, aluminum mount

24 $73.00

HI-MINICLIKNO Adjusts for rainfall 3 mm (0.1”) to 25 mm (1.0”),includes 7.6 m (25') wire

12 87.19

HI-MINICLIKC Adjusts for rainfall of 3 mm (0.1”) to 25 mm (1.0”),includes 7.6 m (25') wire

12 83.14

HI-MINICLIKHV Adjusts for rainfall of 3 mm (0.1”) to 25 mm (1.0”),for 120/230 VAC wiring applications

1 158.16

hi-sgM Sensor gutter mount (for use with Mini-Clik,Rain-Clik, and wireless Rain-Clik sensors)

1 8.11

rain-Clik™

rain sensor


hi-rAiNClik Rain sensor with Quick Response™ system andmultiple mounting options

24 $73.00

HI-RAINCLIKNO Rain Sensor with Quick Response system andmultiple mounting options, normally open switch

24 85.16

HI-RFC Rain and Freeze sensor in one unit 24 135.68


1 8.11

Wireless rain-Clik™

rain sensor


hi-WrClik Wireless Rain Sensor Combo (includes receiver andtransmitter)

12 $223.05

hi-WrCsgM Wireless Rain Sensor Combo (includes receiver andtransmitter) with Sensor gutter mount.

12 231.16

HI-WRCLIKR Wireless Rain-Clik receiver 20 198.71

HI-WRCLIKTR Wireless Rain-Clik transmitter 20 141.94

HI-WRFCLIK Wireless Rain/Freeze sensor 12 253.46

HI-WRFCLIKTR Wireless Rain/Freeze transmitter 20 188.58

freeze-Clik®

freeze sensor


HI-FREEZECLIK 3° C (37° F) setpoint, 7.6 m (25') wire, screws,24 VAC, 6 amp

12 $109.50

HI-FREEZECLIKREV Reverse switching, 3° C (37° F) setpoint, 7.6 m (25’ )wire, screws, 24 VAC, 6 amp

1 121.66

sensors




CMYK100/50/0/30

CMYK56/0/0/0

soil-Clik™

soil Moisture sensor


hi-soilClik Soil-Clik moisture sensor module and probe 1 $302.13

Wind-Clik™

Wind sensor


hi-WiNdClik Adjustable wind control 19-56 kph (12-35 mph)shut down, 24 VAC, 5 amp

1 $334.57

Mini-Weather station


hi-MWs Weather Station combines wind and rain sensors 1 $517.06

HI-MWSFR Weather Station incorporates rain, wind andfreeze sensors

1 598.17

flow-Clik®

flow sensor


hi-floWClik Flow-Clik™ System includes sensor and interface box, works with all standard 24 volt controllers (excludes sensor body - order separately)

1 $719.83

hi-hfs Hunter Flow-Sync flow meter for Hunter flow learningcontrollers

1 598.17

flow sensor bodies for use with flow-Clik and hfs flow sensor (for ACC & i-Core)

hi-fCt100 25 mm (1") schedule 40 sensor body, slip x slip 1 145.99

hi-fCt150 40 mm (1½") schedule 40 sensor body, slip x slip 1 178.44




BsP/slip Adapters for flow sensors


HI-795700 25mm Slip to BSP adaptor 1 $9.12

HI-795800 40mm Slip to BSP adaptor 1 15.21



sensors



solar sync™

Adds Weather-Based Control to hunter x-Core, Pro-C, iCC, i-Core and ACC Controller


hi-solArsyNC Compatible with ICC controllers, comes complete with sensor platform and controller interface, automatically responds to local weather changes

12 $283.88

hi-solArsyNCseN Solar Sync sensor only (for use with Pro-C, ACC, I-Core, or X-Core controllers)

20 233.19

hi-Wss Wireless version compatible with ICC controllers, comes complete with wireless sensor, wireless receiver and mod-ule, automatically responds to local weather changes

10 496.79

hi-WssseN Wireless sensor and receiver only (for use with Pro-C ACC, I-Core, or X-Core controllers)

10 435.96

HI-WSSR Wireless Solar Sync Receiver 10 223.05

HI-WSSTR Wireless Solar Sync Transmitter/Sensor 10 334.57

sensor Accessories


hi-sgMC Sensor guard enclosure with Mini-Clik™ conduit rainsensor, stainless steel construction, automaticallyresponds to local weather changes

1 $740.11

HI-BPSW Bypass switch box with no-strip wire connectors anddouble-backed tape for mounting

12 70.97

HI-EXT Extension bracket adds 18 cm to standard rain orfreeze sensor bracket

1 42.58

HI-REL2 Heavy duty sensor switching relay, 2-pole relay,double throw

1 81.11

HI-REL3 Heavy duty sensor switching relay, 3-pole relay,double throw

1 91.25


1 8.11

sensors



FLOW RATES

Emitter Flow Rate Per Metre* (2.35 lph Emitter)

Chart A Emitter Spacing (m)

0.30 0.40

lph 7.83 5.88

lpm 0.1305 0.0979

Approximate Run Times (minutes) (2.35 lph Emitter)

Applied Water(mm)

Emitter Spacing (m)

0.30 0.40

Drip Tube Row Spacing (m) Drip Tube Row Spacing (m)

0.30 0.40 0.50 0.40 0.50 0.60

6 14 18 23 25 31 37

8 18 25 31 33 41 49

10 23 31 38 41 51 61

MAX RUN LENGTHS

Emitter Flow Rate 2.35

Inlet Pressure Emitter Spacing (m)

kpa 0.30 0.40

150 50 66

200 64 85

250 74 98

300 74* 98*

350 74* 98*

Max. Lateral Length (m)

* Maximum single lateral length at 0% slope* Maximum single lateral length is capped due to possible flushing

considerations; if additional lateral flushing pressure is available then longer lateral lengths may be possible.

* Approximate values, use as reference onlyValue (for Emitter and Spacing) x length of run = Flow rateexample 1:How much flow in litres per hour (lph) for 2.35 lph emitter, 0.40m spacing that totals 364m in length?Chart A [2.35 lph emitter, 0.40m column, lph row is 5.88] 5.88 x 364= 2,140 lphexample 2:How much flow in litres per minute (lpm) for 2.35 lph emitter, 0.30m spacing that totals 211m in length?Chart A [2.35 lph emitter, 0.30m column, lpm row is 0.1305] 0.1305 x 211= 27.54 lpm

Pld: Professional landscape dripline

Pressure Compensation Non-drain emitter

Code description Qty/Pallet list Price

Pld-235030050 PLD Brown 2.35lph 0.3m x 50m Roll 50 $62.48

Pld-235030100 PLD Brown 2.35lph 0.3m x 100m Roll 30 119.97





Pld-235030050r PLD-R Purple 2.35lph 0.3m x 50m Roll 50 62.48



Note: Product codes ending in ‘R’ are for reclaimed water use.Hunter PLD suits Australian Standard 13mm LDPE Fittings.

Pld drip fittings

Code description Bag/Box Qty. list Price

hi-PldAVr ½" male threaded air and vacuum relief valve 10/100 $24.33

Micro irrigation



eco-Mat

subsurface irrigation Mat


HI-ECOMAT16 Subsurface Drip Mat, .80 m wide 100 m long,16 mm tubing, 80 m2

1 $4,437.75

HI-ECOMAT17 Subsurface Drip Mat, .80 m wide 90 m long,17 mm tubing, 72m2

1 4,813.63

Pld-esd: enhanced subsurface dripline tubing

Wrapped Pld tubing for subsurface Applications


HI-PLDESD16 Enhanced Subsurface PLD, 100 m roll,wrapped 16 mm tubing

1 $1,067.00

HI-PLDESD17 Enhanced Subsurface PLD, 250' roll,wrapped 17 mm tubing

1 1,018.50

Micro irrigation



Point source drip emitters

self-Piercing Barb

Code description Bag/Box Qty list Price

hi-he050B25 2 l/hr Emitter 25/500 $1.05

hi-he10B25 4 l/hr Emitter 25/500 1.05




10/32 thread


hi-he050t25 2 l/hr Emitter 25/500 $1.05

hi-he10t25 4 l/hr Emitter 25/500 1.05




½" fPt


hi-heB10 4 l/hr Emitter 25/200 $4.97

hi-heB20 8 l/hr Emitter 25/200 4.97

diffuser Cap


hi-hediff Emitter Diffuser Cap 50/1,000 $0.32

Micro irrigation



root zone Watering system

rzWs, tree and shrub subsurface Watering system, with ½" swing jointCode description Qty/Box list Price

HI-RZWS10 Basic 25 cm (10") Root Zone Watering System,including StrataRoot System and cap ready to acceptcustomer-provided irrigation hardware; bubbler,swing joint and check valve not included

20 $32.44

hi-rzWs1025 RZWS-10 with a factory installed 0.90 l/m(0.25 GPM) bubbler (PCB25)

20 40.55

HI-RZWS1050 RZWS-10 with a factory installed 1.90 l/m(0.50 GPM) bubbler (PCB50)

20 40.55

HI-RZWS1025CV RZWS-10-25 with a factory installedHunter check valve (HCV)

20 62.86


20 62.86


12 62.86


12 79.08


12 79.08

HI-RZWS1825CV RZWS-18-25 with a factory installed Huntercheck valve (HCV)

12 101.39

hi-rzWs1850CV RZWS-18-50 with a factory installed Huntercheck valve (HCV)

12 101.39


6 73.00


6 95.30


6 95.30


6 113.55


6 113.55

Note: Available with reclaimed purple cap. Add "-R" to the Model.

Micro irrigation



rzWs Accessories


HI-RZWSCAP Replacement cap, all RZWS-18 and RZWS-36 1 $8.41

HI-RZWSRCCAP Purple Replacement cap, all RZWS-18 and RZWS-36 1 8.41

HI-RZWS10RCC Purple Replacement cap for all RZWS-10 models 1 10.54

hi-rzWssleeVe Field-installed sleeve made from landscape filter fabric for sandy soils.

1 8.41

Micro irrigation



MP Quick Connector


HC-MPQCB MP Quick Connector - with LTO Barb (for PE Pipe)Assembled

50 $7.74

HC-MPQCS MP Quick Connector - with 15mm PVC Spigot(for PVC Pipe) - Assembled

50 7.74

MP Quick Connector Components & Accessories


HC-MPQCE MP 15mm NPT 90° PVC Elbow x 10mm Compression 1 $4.57

9774 MP LTO for PE Pipe 1 2.02

10623 MP 15mm PVC Spigot x 10mm Compression 1 1.51

9099 MP Riser Tubing, 10mm x 150m Roll 1 388.75

10301 MP QC Goof Plug 1 1.90

9813 MP QC Coupler 1 2.98

9810 MP QC LTO Punch Tool for LD PE Pipe 1 30.54

MP riser


HC-MPRB MP Riser - with LTO Barb (for PE Pipe) - Assembled 10 $18.25

HC-MPRS MP Riser - with 15 mm PVC Spigot (for PVC Pipe -Assembled

10 18.25

MP riser Components


10970MP MP Riser Stake 1 $6.57

10594 MPR to ACME Adaptor 1 4.62

9677 MP Stake Adaptor 1 2.32

9774 MP LTO for PE Pipe 1 2.02

10623 MP 15mm PVC Spigot x 10mm MP Riser Tubing 1 1.51

9099 MP Riser Tubing, 10mm x 150m Roll 1 388.75

MP riser Accessories


10301 MP Riser Goof Plug 1 $1.90

10615 MP Riser Cap 1 1.81

9813 MP Riser Coupler 1 2.98

9810 MP Riser LTO Punch Tool for LD PE Pipe 1 30.54

10288 MP Riser Stake Installation Tool 1 18.93

MP regulator/drain Check ACMe thread


10709-030 Regulator Drain Check (MPRDC) - 30 PSI 150 $17.04

10709-040 Regulator Drain Check (MPRDC) - 40 PSI 150 17.04

10709-050 Regulator Drain Check (MPRDC) - 50 PSI 150 17.04

10710-030 Regulator (MPR) - 30 PSI 150 15.48



Miscellaneous Products



swing Joint – threaded

sJ: Swing Joint, Pre-assembled Leak-free Design with 4 Swing ElbowsCode description Qty/Box list Price

hi-sJ506 ½" x 15 cm (6") standard swing joint, 4 swing elbows 150 $5.07

hi-sJ512 ½" x 30 cm (12") standard swing joint, 4 swing elbows 100 6.08

hi-sJ706 ¾" x 15 cm (6") standard swing joint, 4 swing elbows 150 5.58

hi-sJ712 ¾" x 30 cm (12") standard swing joint, 4 swing elbows 100 6.08

hi-sJ7506 ¾" x ½" x 15 cm (6") swing joint, 4 swing elbows) 200 5.47

hi-sJ7512 ¾” x ½ x 30 cm (12") standard swing joint, 4 swing elbows 100 6.08

hunter flexible tubing – swing Pipe

sJ: Swing Joint, Pre-assembled Leak-free Design with 4 Swing ElbowsCode description Qty list Price

hi-flexsg Soft grip, flexible tubing, 30 m (100') coil 75/pallet $83.14

HI-FLEXSG18 Soft grip, flexible tubing, precut 45 cm (18") segments 200/Box 1.62

hunter spiral Barb elbows


hi-hsBe050 ½" male x insert poly barb elbow 200 $0.63

hi-hsBe075 ¾" male x insert poly barb elbow 200 0.65

hi-hsBetool Installation tool 1 15.21




tools


hi-053191 "T" handle tool, nozzle insertion, lift up, and arcadjustment tool for PGP®, I-20, I-25, I-40, and I-60

1 $2.43

hi-280100 Rotor pitot gauge and tube assembly 1 131.80

HI-129900 Rotor pressure gauge 1 101.39

hi-123200 Nozzle insertion collar 1 2.03

hi-460302 Valve box hand pump 1 91.25

hi-172000 Hunter Wrench 1 1.01

hi-PoCketPuNCh Emitter tool for punching a pilot hole, inserting, andremoving an emitter

25 24.33

hi-heMt Emitter tool for punching pilot holes and pellets,inserting and removing an emitter, and cutting tubing

12 44.61

Marker flags


hC-flAg1 Nelson/Hunter Marker Flags for Sprinkler System Layout - Bundle of 100

$51.98

“T” handle tool

hi-053191list Price $2.43

Nozzle Insertion Collar


Emitter tool

hi-PoCketPuNChlist Price $24.33

Rotor pitot gauge & tube assembly


Hunter Wrench


Nelson/HunterMarker Flags

Bundle of 100hC-flAg1

list Price $51.98

Rotor pressure gauge


Valve box hand pump


Emitter tool

hi-heMtlist Price $44.61

tools & ACCessories


LASCO List Price Exc GST - 1 October 2015


Male ultra zone Manifold fittings

rated to 150 Psi (1035 kpa)


lAs-1301-010 1” Tee - Nut x MTHD x VCONN 25 $17.54

lAs-1301-210 1” Double Tee - Nut x MTHD x VCONN (2) 25 34.30

lAs-1301-310 1” Triple Tee - Nut x MTHD x VCONN (3) 25 51.49

lAs-1301-410 1” Quad Tee - Nut x MTHD x VCONN (4) 25 73.68

lAs-1303-010 1” Tee - VCONN x VCONN x Nut 20 17.52

lAs-1304-010 1” Tee - Slip x MTHD x VCONN 20 17.09

lAs-1306-010 1” Elbow - MTHD x VCONN 25 14.98

lAs-1312-010 1” Elbow - Nut x VCONN 25 16.57

lAs-1320-010 1” Cross - Nut x MTHD x VCONN x VCONN 15 23.34

lAs-1321-010 1” Cross - Slip x MTHD x VCONN x VCONN 15 22.94

lAs-1329-010 1” Adaptor - Slip x Nut 40 9.56

lAs-1330-010 1” Coupling - FTHD x O-Ring 100 3.83

lAs-1330-131 1" x 3/4” Coupling - FTHD x O-Ring 100 3.83

lAs-1336-010 1” Valve Adaptor - Slip x VCONN 40 9.90

lAs-1348-010 1” Cap - FTHD x O-Ring 100 3.81

Manifold fittings



B series: gear driven rotors

g35B/g70B/g75B standard stocking unit rotors with 1¼" Acme threaded inlet


HI-G35B6S Full/Part-Circle, Block Check Valve 12 $192.63

hi-g70B25s Full-Circle Opposing Nozzles, Block Check Valve 12 263.60

hi-g75B25s Full/Part-Circle, Block Check Valve 12 294.02

Note: G35B Standard Stocking Unit rotor above include a #6 factory installed nozzle. G35B Standard Stocking Unit rotors include a nozzle rack with nozzles #2 through #12 and a self-adjusting variable stator. G70B and G75B Standard Stocking Unit rotors above include a #25 factory installed nozzle. G70B and G75B Standard Stocking Unit rotors include a nozzle pack with nozzles #15 through #28 and a manually adjustable stator. Acme inlet threads are standard on all models that start with “G” and swing joints with Acme outlet fittings must be used or, the appropriate Acme Adaptor Bushing found on page 126.

g80B/g84B/g85B standard stocking unit rotors with 1¼" Acme threaded inlet


HI-G80B25S Full-Circle Opposing Nozzles, Block Check Valve 6 $294.02

HI-G80B48S Full-Circle Opposing Nozzles, Block Check Valve 6 294.02

HI-G84B18S Full-Circle, Block Check Valve 6 395.40



HI-G85B18S Full/Part-Circle, Block Check Valve 6 395.40



Note: G80B Standard Stocking Unit rotors include a manually adjustable stator. G84B/G85B Standard Stocking Unit rotors above include a #18, #25 or #48 factory installed nozzle. G84B/G85B Standard Stock Unit rotors with #18 nozzle include a self-adjusting variable stator. G84B/G85B Standard Stock Unit rotors with #25 or #48 nozzle include a manually adjustable stator. Acme inlet threads are standard on all models that start with “G” and swing joints with Acme outlet fittings must be used or, the appropriate Acme Adaptor Fitting found on page 126.

g80B/g84B/g85B Non-standard stocking unit rotors with 1¼" Acme threaded inlet


HI-G80Bxx Full-Circle Opposing Nozzles, Block Check Valve 6 $294.02

HI-G84Bxx Full-Circle, Block Check Valve 6 395.40

HI-G85Bxx Full/Part-Circle, Block Check Valve 6 395.40

Note: Insert the “xx” nozzle selection when ordering the above Non-Standard Stocking Unit G80B/G84B/G85B rotors. Acme inlet threads are standard on all models that start with “G” and swing joints with Acme outlet fittings must be used or, the appropriate Acme Adaptor Bushing found on page 126.

golf Products



tts 800 series: total-top-service gear driven rotors

g835 standard stocking unit rotors with 1½" Acme threaded inlet


HI-G835C6S Full/Part-Circle, Check-O-Matic 4 $628.59

HI-G835E6P5S Full/Part-Circle, Electric Valve-In-Head 4 699.56

Note: G835 Standard Stocking Unit rotors above include a #6 factory installed nozzle. G835 Standard Stock-ing Unit rotors include a nozzle rack with nozzles #2 through #12 and a self-adjusting variable stator. G835E Standard Stocking Unit model rotor above includes a P5 (50 PSI) regulator setting. Acme inlet threads are standard on all models that start with “G” and swing joints with Acme outlet fittings must be used or, the appropriate Acme Adaptor Fitting found on page 126.

g835 Non-standard stocking unit rotors with 1½" Acme threaded inlet


HI-G835Cxx Full/Part-Circle, Check-O-Matic 4 $628.59

HI-G835ExxPx Full/Part-Circle, Electric Valve-In-Head 4 699.56

Note: Insert the “xx” nozzle selection when ordering the above Non-Standard Stocking Unit G835 rotors. Elec-tric models also require the “x” pressure selection. G835 electric rotors have adjustable regulation with P5 (50 psi) and P6 (65 psi) settings. P5 setting is recommended for nozzles #2 through #12 nozzles. P6 set-ting is recommended for nozzles #10 through #12. Acme inlet threads are standard on all models that start with “G” and swing joints with Acme outlet fittings must be used or, the appropriate Acme Adaptor Bushing found on page 126.

golf Products



tts 800 series: total-top-service gear driven rotors (continued)

g880/g884/g885 standard stocking unit rotors with 1½" Acme threaded inlet


HI-G880C23S Full-Circle Opposing Nozzles, Check-O-Matic 4 $567.76

HI-G880C25S Full-Circle Opposing Nozzles, Check-O-Matic 4 567.76


HI-G880E25P6S Full-Circle Opposing Nozzles, Electric Valve-In-Head 4 618.45



HI-G884C18S Full-Circle, Check-O-Matic 4 638.73




HI-G884E18P5S Full-Circle, Electric Valve-In-Head 4 699.56




HI-G885C18S Full/Part-Circle, Check-O-Matic 4 638.73








Note: G880 Standard Stocking Unit rotors above include a #23, #25 or #48 factory installed nozzle and a manually adjustable stator. G880E Standard Stocking Unit rotors above include a factory-installed #23 nozzle and a P6 (65 PSI) regulator setting, a #25 nozzle and a P8 (80 PSI) regulator setting or a #48 nozzle and a P8 (80 psi) regulator setting. G884/G885 Standard Stocking Unit rotors above include a #18, #23, #25 or #48 factory installed nozzle. G884/G885 Standard Stock Unit rotors with #18 nozzle include a self-adjusting variable stator. G884/G885 Standard Stock Unit rotors with #23, #25 or #48 nozzle include a manually adjustable stator. G884E/G885E Standard Stocking Unit rotors with a factory-installed #18 nozzle have a P5 (50 psi) regulator setting. G884E/G885E Standard Stocking Unit rotors with a factory-installed #23 nozzle have a P6 (65 psi) regulator setting. G884E/ G885E Standard Stocking Unit rotors with a factory-installed #25 or a #48 nozzle have a P8 (80 psi) regulator setting. Acme inlet threads are standard on all models that start with “G” and swing joints with Acme outlet fittings must be used or, the appropriate Acme Adaptor Fitting found on page 126.

g880/g884/g885 Non-standard stocking unit rotors with 1½" Acme threaded inlet


HI-G880Cxx Full-Circle Opposing Nozzles, Check-O-Matic 4 $567.76

HI-G880ExxPx Full-Circle Opposing Nozzles, Electric Valve-In-Head 4 618.45

HI-G884Cxx Full-Circle, Check-O-Matic 4 638.73

HI-G884ExxPx Full-Circle, Electric Valve-In-Head 4 699.56

HI-G885Cxx Full/Part-Circle, Check-O-Matic 4 638.73

HI-G885ExxPx Full/Part-Circle, Electric Valve-In-Head 4 699.56

Note: Insert the “xx” nozzle selection when ordering the above Non-Standard Stocking Unit G880/G884/G885 rotors. Electric models also require the “x” pressure selection. G880/G884/G885 electric rotors have adjustable regulation with P5 (50 psi), P6 (65 psi) and P8 (80 psi) settings. P5 setting is recommended for nozzles #10 through #18 nozzles. P6 setting is recommended for nozzles #18 through #25. P8 setting is recommended for nozzles #25 through #53. Acme inlet threads are standard on all models that start with “G” and swing joints with Acme outlet fittings must be used or, the appropriate Acme Adaptor Bushing found on page 126.

golf Products



tts 900 series: total-top-service gear driven rotors

g900/g995 standard stocking unit rotors with 1½" Acme threaded inlet


HI-G990C25S Full-Circle Opposing Nozzles, Check-O-Matic 4 $598.17




HI-G995C25S Adjustable Arc Part-Circle, Check-O-Matic 4 669.14

HI-G995C53S Adjustable Arc Part-Circle, Check-O-Matic 4 669.14

HI-G995E25P8S Adjustable Arc Part-Circle, Electric Valve-In-Head 4 740.11

HI-G995E53P8S Adjustable Arc Part-Circle, Electric Valve-In-Head 4 740.11

Note: G990 and G995 Standard Stocking Unit rotors above include a #25 or #53 factory installed nozzle. G990 and G995 Standard Stocking Unit rotors include a manually adjustable stator. G990E and G995E Standard Stocking Unit rotors above include a factory-installed #25 nozzle and a P8 (80 psi) regulator setting or a #53 nozzle and a P8 (80 psi) regulator setting. Acme inlet threads are standard on all models that start with “G” and swing joints with Acme outlet fittings must be used or, the appropriate Acme Adaptor Fitting found on page 126.

g990/g995 Non-standard stocking unit rotors with 1½" Acme threaded inlet


HI-G990Cxx Full-Circle Opposing Nozzles, Check-O-Matic 4 $598.17

HI-G990ExxPx Full-Circle Opposing Nozzles, Electric Valve-In-Head 4 659.17

HI-G995Cxx Adjustable Arc Part-Circle, Check-O-Matic 4 669.14

HI-G995ExxPx Adjustable Arc Part-Circle, Electric Valve-In-Head 4 740.11

Note: Insert the “xx” nozzle selection when ordering the above Non-Standard Stocking Unit G990/G995 rotors. Electric models also require the ”x” pressure selection. G990/G995 electric rotors have adjustable regulation with P8 (80 psi), P1 (100 PSI) and P2 (120 psi) settings. P8 setting is recommended for nozzles #25 through #53 nozzles. P1 setting is recommended for nozzles #53 through #73. P2 setting is recommended for nozzles #73. Acme inlet threads are standard on all models that start with “G” and swing joints with Acme outlet fittings must be used or, the appropriate Acme Adaptor Bushing found on page 126.

golf Products



dih 800 series: decoder-in-head total-top-service gear driven rotors

g835 standard stocking unit dih rotors with 1½" Acme threaded inlet


HI-G835D6P5S Full/Part-Circle, Electric Valve-In-Head, IntegratedPilot-100 Decoder

4 $1,034.13

HI-G835DD6P5S Full/Part-Circle, Electric Valve-In-Head, IntegratedPilot-200 Decoder

4 1,135.51

Note: All DIH TTS rotors includes 2 each of the DBR/Y-6 connectors for in-ground splice connections to the two-wire path. Refer to the TTS 800 Series Pages for more information.

g835 Non-standard stocking unit dih rotors with 1½" Acme threaded inlet


HI-G835DxxPx Full/Part-Circle, Electric Valve-In-Head, IntegratedPilot-100 Decoder

4 $1,034.13

HI-G835DDxxPx Full/Part-Circle, Electric Valve-In-Head, IntegratedPilot-200 Decoder

4 1,135.51


golf Products



dih 800 series: decoder-in-head tts gear driven rotors (continued)

g880/g884/g885 standard stocking unit dih rotors with 1½" Acme threaded inlet


HI-G880D23P8S Full-Circle Opposing Nozzles, Electric Valve-In-Head,Integrated Pilot-100 Decoder

4 $963.16

HI-G880DD23P8S Full-Circle Opposing Nozzles, Electric Valve-In-Head,Integrated Pilot-200 Decoder

4 1,064.54


4 963.16


4 1,064.54


4 963.16


4 1,064.54


4 1,054.40


4 1,155.79


4 1,054.40


4 1,155.79


4 1,054.40


4 1,155.79


4 1,054.40


4 1,155.79


4 1,054.40


4 1,155.79


4 1,054.40


4 1,155.79


4 1,054.40


4 1,155.79


4 1,054.40


4 1,155.79


golf Products



dih 800 series: decoder-in-head tts gear driven rotors (continued)

g880/g884/g885 Non-standard stocking unit dih rotors with 1½" Acme threaded inlet


HI-G880DxxPx Full-Circle Opposing Nozzles, Electric Valve-In-Head,Integrated Pilot-100 Decoder

4 $963.16

HI-G880DDxxPx Full-Circle Opposing Nozzles, Electric Valve-In-Head,Integrated Pilot-200 Decoder

4 1,064.54


4 1,054.40


4 1,155.79


4 1,054.40


4 1,155.79


dih 900 series: decoder-in-head total-top-service gear driven rotors

g990/g995 standard stocking unit dih rotors with 1½" Acme threaded inlet



4 $1,034.13


4 1,135.51


4 1,034.13


4 1,134.13


4 1,105.10


4 1,206.48


4 1,105.10


4 1,206.48

Note: All DIH TTS rotors includes 2 each of the DBR/Y-6 connectors for in-ground splice connections tothe two-wire path. Refer to the TTS 900 Series Pages for more information.

g990/g995 Non-standard stocking unit dih rotors with 1½" Acme threaded inlet


HI-G990DxxPx Full-Circle Opposing Nozzles, Electric Valve-In-Head,Integrated Pilot-100 Decoder

4 $1,034.13

HI-G990DDxxPx Full-Circle Opposing Nozzles, Electric Valve-In-Head,Integrated Pilot-200 Decoder

4 1,135.51

HI-G995DxxPx Adjustable Arc Part-Circle, Electric Valve-In-Head,Integrated Pilot-100 Decoder

4 1,105.10

HI-G995DDxxPx Adjustable Arc Part-Circle, Electric Valve-In-Head,Integrated Pilot-200 Decoder

4 1,206.48


golf Products



retro riser kits


hi-g70rt G70 Retro Riser Kit. Full circle riser with nozzle set 12 $283.88

hi-g75rt G75 Retro Riser Kit. Full/Part circle riser with nozzle set 12 344.71

hi-g80rt G80 Retro Riser Kit. Full circle riser with nozle set 12 324.43

rotor Accessories


HI-473800 G990 rubber kit cover (date codes 06/11 & prior only) 1 $233.19

HI-473900 G995 rubber kit cover (also G990 date codes 07/11 & after) 1 233.19

hi-g90hs100 Hose adaptor* for G90 and G900 Series rotors 1 202.77

HI-G800HS100 Hose adaptor* for G800 Series rotors 1 202.77

Note: *Hose adaptors include a combination ¾”/1” hose swivel.

golf rotor tools


HI-382800 Arc adjustment/riser hold-up - G85B & G885 1 $5.07

HI-803700 Nozzle removal/installation - G85B & G885 short/mid-range nozzles 1 40.55

hi-052510 Snap ring removal tool 1 46.64

hi-470500 Valve insertion/removal tool - G60 & G70 Series 1 182.49

hi-052805 Valve insertion/removal tool - G90 & G900 Series 1 294.02

hi-604000 Valve insertion/removal tool - G800 Series 1 269.68

hi-475600 Valve insertion/removal pliers - G800 Series 1 91.25

hi-609400 Valve flushing tool for G800 and G900 Series 1 34.47

hi-053191 T-handle tool - V.I.H. selector, nozzle insertion, lift up & arc adjustment 1 2.43

HI-461720 Hunter wrench with hex for nozzle insertion & removal – 2 pack 1 2.64

hi-280100 Rotor pitot gauge and tube assembly 1 131.80

hi-460302 Hand pump for extracting water from rotor body 1 91.25

HI-475700 Tool kit – includes tool box and all items above except for 470500 1 1,003.71

Arc Adjustment/Riser Hold-up Tool


Valve & Snap Ring Insertion/Removal

Toolhi-475600

list Price $91.25

Nozzle Removal/Installation Tool


Valve Insertion/Removal Tool


Snap Ring Removal Tool


Hand Pump


Valve Flushing Tool


“T“ Handle Tool


Valve Insertion/Removal Tool


tools & ACCessories

golf Products



Pilot golf Central Control systems

Pilot-CC Central Control software


HI-PILOTCC Central control software and documentation.Includes computer.

1 $58,194.99

Pilot-fi Central Control field interface


HI-PILOTFIHWR Field interface for wired central control systems. 1 $8,516.34

HI-PILOTFIUHF Field interface for UHF radio central control systems.Includes radio module. License specifying frequency required at time of order.

1 8,921.88

HI-PILOTFILF Field interface for license-free 915 MHz radio central control systems. Includes radio module. Check local radio regulations before ordering.

1 9,732.96

HI-PILOTFIILF Field interface for license-free 2.4 GHz radio central control systems. Includes radio module. Check local radio regulations before ordering.

1 9,732.96

Pilot Controller Add-on Module and Accessories


HI-PILOTFC010 10-station output module for PILOT-FC field controller. Includes Safety Toggle™ switches.

1 $1,318.01

HI-PILOTDH250EXP 250-station output module for PILOT -DH decoder hub.

1 2,524.49

HI-PILOTHWR Hardwire communication module used to connect a standalone PILOT -FC field controller to a wired PILOT central control system

1 1,013.85

HI-PILOTMODUHF UHF radio communication module used to connect a standalone PILOT -FC field controller to a UHF radiobased PILOT central control system. Includes radio. License specifying frequency is required at time of order.

1 4,663.71

HI-PILOTMODLF 915 MHz radio communication module used to connect a standalone PILOT-FC field controller to a 915 MHz radio-based PILOT central control system. Radio is included. Check local radio regulations before ordering.

1 5,677.56

HI-PILOTMODILF 2.4 GHz radio communication module used to connect a standalone PILOT-FC field controller to a 2.4 GHz radio-based PILOT central control system. Radio is included. Check local radio regulations before ordering.

1 5,677.56

HI-PILOTFCFP Replacement facepack for PILOT-FC field controller. 1 2,798.23

HI-PILOTDHFP Replacement facepack for PILOT-DH decoder hub. 1 3,041.55

golf Products



Pilot-fC stand Alone field Controllers with Plastic Pedestal enclosure


HI-PILOTFC30S 30-station plastic pedestal standalone field controller. Dual (120/230 VAC) voltage. Expandable to 80 stations with PILOT-FC-010 10-station output modules.

1 $12,166.20


1 13,585.59


1 15,207.75


1 16,829.91

HI-PILOTFC70S 70-station plastic pedestal standalone field controller. Dual (120/230 VAC) voltage. Expandable to 80 stations with a PILOT -FC-010 10-station output module.

1 18,046.53

HI-PILOTFC80S 80-station plastic pedestal standalone field controller. Dual (120/230 VAC) voltage.

1 19,263.15

Pilot-fC hardwire field Controllers with Plastic Pedestal enclosure


HI-PILOTFC30HWR 30-station plastic pedestal hardwire field controller.Dual (120/230 VAC) voltage. Includes hardwirecommunication module. Expandable to 80 stationswith PILOT-FC-010 10-station output modules.

1 $13,180.05


1 14,599.44


1 16,221.60


1 17,843.76

HI-PILOTFC70HWR 70-station plastic pedestal hardwire field controller.Dual (120/230 VAC) voltage. Includes hardwirecommunication module. Expandable to 80 stationswith a PILOT-FC-010 10-station output module.

1 19,060.38

HI-PILOTFC80HWR 80-station plastic pedestal hardwire field controller.Dual (120/230 VAC) voltage. Includes hardwirecommunication module.

1 20,277.00

golf Products



Pilot-fC uhf radio field Controllers with Plastic Pedestal enclosure


HI-PILOTFC30UHF 30-station plastic pedestal UHF radio field controller. Dual (120/230 VAC) voltage. Includes UHF radio communication module. Expandable to 80 stations with PILOT-FC-010 10-station output modules. A license specifying frequency is required at time of order.

1 $16,627.14


1 19,263.15


1 19,668.69


1 21,290.85

HI-PILOTFC70UHF 70-station plastic pedestal UHF radio field controller. Dual (120/230 VAC) voltage. Includes UHF radio communication module. Expandable to 80 stations with a PILOT-FC-010 10-station output module. A license specifying frequency is required at time of order.

1 22,507.47

HI-PILOTFC80UHF 80-station plastic pedestal UHF radio field controller. Dual (120/230 VAC) voltage. Includes UHF radio communication module. A license specifying frequency is required at time of order.

1 23,724.09

golf Products



Pilot-fC license-free 915 Mhz radio field Controllers with Plastic Pedestal enclosure


HI-PILOTFC30LF 30-station plastic pedestal license-free 915 MHzradio field controller. Dual (120/230 VAC) voltage.Includes 915 MHz radio communication module.Expandable to 80 stations with PILOT-FC-01010-station output modules. Check local radioregulations before ordering.

1 $17,843.76


1 19,263.15


1 20,885.31


1 22,507.47

HI-PILOTFC70LF 70-station plastic pedestal license-free 915 MHzradio field controller. Dual (120/230 VAC) voltage.Includes 915 MHz radio communication module.Expandable to 80 stations with a PILOT-FC-01010-station output module. Check local radioregulations before ordering.

1 23,724.09

HI-PILOTFC80LF 80-station plastic pedestal license-free 915 MHzradio field controller. Dual (120/230 VAC) voltage.Includes 915 MHz radio communication module.Check local radio regulations before ordering.

1 24,940.71

golf Products



Pilot-fC license-free 2.4 ghz radio field Controllers with Plastic Pedestal enclosure


HI-PILOTFC30ILF 30-station plastic pedestal license-free 2.4 GHzradio field controller. Dual (120/230 VAC) voltage.Includes 2.4 GHz radio communication module.Expandable to 80 stations with PILOT -FC-01010-station output modules. Check local radioregulations before ordering.

1 $17,843.76


1 19,263.15


1 20,885.31


1 22,507.47

HI-PILOTFC70ILF 70-station plastic pedestal license-free 2.4 GHzradio field controller. Dual (120/230 VAC) voltage.Includes 2.4 GHz radio communication module.Expandable to 80 stations with a PILOT -FC-01010-station output module. Check local radioregulations before ordering.

1 23,724.09

HI-PILOTFC80ILF 80-station plastic pedestal license-free 2.4 GHzradio field controller. Dual (120/230 VAC) voltage.Includes 2.4 GHz radio communication module.Check local radio regulations before ordering.

1 24,940.71

Pilot-dh standalone decoder hub with Plastic Pedestal enclosure


HI-PILOTDH250S 250-station standalone decoder hub. Dual (120/230VAC) voltage. Expandable to 999 stations withPILOT-DH-250 decoder output modules.

1 $12,166.20

HI-PILOTDH500S 500-station standalone decoder hub. Dual (120/230VAC) voltage. Expandable to 999 stations withPILOT-DH-250 decoder output modules.

1 14,599.44

HI-PILOTDH750S 750-station standalone decoder hub. Dual (120/230VAC) voltage. Expandable to 999 stations with aPILOT-DH-250 decoder output module.

1 17,032.68

HI-PILOTDH999S 999-station standalone decoder hub. Dual (120/230VAC) voltage.

1 19,465.92

golf Products



Pilot-dh hardwire decoder hub with Plastic Pedestal enclosure


HI-PILOTDH250HWR 250-station hardwire decoder hub. Dual (120/230VAC) voltage. Expandable to 999 stations withPILOT -DH-250 decoder output modules.

1 $13,180.05

HI-PILOTDH500HWR 500-station hardwire decoder hub. Dual (120/230VAC) voltage. Expandable to 999 stations withPILOT -DH-250 decoder output modules.

1 15,613.29

HI-PILOTDH750HWR 750-station hardwire decoder hub. Dual (120/230VAC) voltage. Expandable to 999 stations with aPILOT -DH-250 decoder output module.

1 18,046.53

HI-PILOTDH999HWR 999-station hardwire decoder hub. Dual (120/230VAC) voltage.

1 20,479.77

Pilot-dh uhf radio decoder hub with Plastic Pedestal enclosure


HI-PILOTDH250UHF 250-station UHF radio decoder hub. Dual (120/230VAC) voltage. Expandable to 999 stations withPILOT-DH-250 decoder output modules. Licensespecifying frequency required at time of order.

1 $16,627.14

HI-PILOTDH500UHF 500-station UHF radio decoder hub. Dual (120/230VAC) voltage. Expandable to 999 stations withPILOT-DH-250 decoder output modules. Licensespecifying frequency required at time of order.

1 19,060.38

HI-PILOTDH750UHF 750-station UHF radio decoder hub. Dual (120/230VAC) voltage. Expandable to 999 stations with aPILOT-DH-250 decoder output module. Licensespecifying frequency required at time of order.

1 21,493.62

HI-PILOTDH999UHF 999-station UHF radio decoder hub. Dual (120/230VAC) voltage. License specifying frequency requiredat time of order.

1 23,926.86

Pilot-dh license-free 915 Mhz radio decoder hub with Plastic Pedestal enclosure


HI-PILOTDH250LF 250-station license-free 915 MHz decoder hub. Dual(120/230 VAC) voltage. Expandable to 999 stationswith PILOT-DH-250 decoder output modules. Checklocal radio regulations before ordering.

1 $17,843.76

HI-PILOTDH500LF 500-station license-free 915 MHz decoder hub. Dual(120/230 VAC) voltage. Expandable to 999 stationswith PILOT-DH-250 decoder output modules. Checklocal radio regulations before ordering.

1 20,277.00

HI-PILOTDH750LF 750-station license-free 915 MHz decoder hub. Dual(120/230 VAC) voltage. Expandable to 999 stationswith a PILOT-DH-250 decoder output module. Checklocal radio regulations before ordering.

1 22,710.24

HI-PILOTDH999LF 999-station license-free 915 MHz decoder hub. Dual(120/230 VAC) voltage. Check local radio regulationsbefore ordering.

1 25,143.48

golf Products



Pilot-dh license-free 2.4 ghz radio decoder hub with Plastic Pedestal enclosure


HI-PILOTDH250ILF 250-station license-free 2.4 GHz decoder hub. Dual(120/230 VAC) voltage. Expandable to 999 stationswith PILOT-DH-250 decoder output modules. Checklocal radio regulations before ordering.

1 $17,843.76

HI-PILOTDH500ILF 500-station license-free 2.4 GHz decoder hub. Dual(120/230 VAC) voltage. Expandable to 999 stationswith PILOT-DH-250 decoder output modules. Checklocal radio regulations before ordering.

1 20,277.00

HI-PILOTDH750ILF 750-station license-free 2.4 GHz decoder hub. Dual(120/230 VAC) voltage. Expandable to 999 stationswith a PILOT-DH-250 decoder output module. Checklocal radio regulations before ordering.

1 22,710.24

HI-PILOTDH999ILF 999-station license-free 2.4 GHz decoder hub. Dual(120/230 VAC) voltage. Check local radio regulationsbefore ordering.

1 25,143.48

Pilot decoders


HI-PILOT100 1-station decoder for use with PILOT-DH decoder hub. 1 $364.99

HI-PILOT200 2-station decoder for use with PILOT-DH decoder hub. 1 557.62



HI-PILOTSG Inline surge arrestor. (Required in DIH rotor installations.)

1 263.60

Pilot decoder Accessories


HI-ICDHP Handheld decoder programmer and tester for Pilotdecoders.

1 $2,412.96

field Controller Accessories for Pilot and Vsx systems


HI-TRNR Two-way handheld UHF radio for remote control.Includes charger and antenna. License specifyingfrequency required at time of order.

1 $5,849.91

golf Products



Pilot radio Accessories


HI-RA5M Omni-directional mast antenna for UHF radiosystems. 5 dB gain. Includes mounting hardware.Does not include cable.

1 $2,443.38

HI-RG850NFNF RG8 cable for use with UHF mast antenna (RA5M).50 ft. (15 m). Includes connectors for centralinterface.

1 1,021.96

HI-RA3F Yagi directional antenna for UHF radio systems. 6 dBgain. Includes mounting hardware. Does not includecable.

1 510.98

HI-RA6F Yagi directional antenna for UHF radio systems. 10 dBgain. Includes mounting hardware. Does not includecable.

1 1,145.65

HI-RG850NFUM RG8 cable for UHF radio for use with Yagi antennas(RA6F and RA3F).50 ft (15 m). Includes connectors.

1 1,021.96

HI-RASREM Omni-directional stealth antenna for UHF radiosystems. Includes L-mount bracket and 15 ft. (4.5 m)cable. Used to enhance radio reception for Pilot UHFsystems.

1 999.66

HI-IMMSANT2 Omni-directional antenna for UHF radio systems. Fitsinside Pilot plastic pedestal lid.

1 993.57

HI-PILOTANT1 Omni-directional mast antenna for license-free 915MHz radio systems

1 2,433.24

HI-PILOTANT2 Omni-directional mast antenna for license-free 2.4GHz radio systems

1 2,433.24

Pilot Communication Control Cable


HI-GCBL #18-4 (4 x 0.82 mm²) shielded communication cable.4,000 ft. (1,200 m) reels.

Call

HI-GCBLA #18-4 (4 x 0.82 mm²) shielded & armoredcommunication cable. 4,000 ft. (1,200 m) reels.

Call

for decoder system Cable & Connectors see Page 88.

golf Products



Weather stations


HI-TWHW TurfWeather station with AC power adaptor, softwareand wired (GCBL cable) communications use withGCBL cable.

1 $17,843.76

HI-TW922A TurfWeather station with AC power adaptor, softwareand 2.4 GHz license-free radio communications

1 17,843.76

HI-TWSUN TurfWeather solar power kit for weather station. 1 1,196.34

golf Products



1” Body diameter swing joint


description Qty/Box list Price

1” Body Diameter 3 Elbow Swing Joint - Any Inlet/Any Outlet 15 $61.60

1” Body Diameter 5 Elbow Triple Top Swing Joint - Any Inlet/Any Outlet 15 95.61

Note: All Swing Joints are 30 cm (12") lay arm. For 45cm (18") lay arm use '18' instead of '12' for last digits of the code and add $7.77 to the list price

1¼” Body diameter swing joint



1 1/4” Body Diameter 3 Elbow Swing Joint - Any Inlet/Any Outlet 15 $81.74

1 1/4” Body Diameter 5 Elbow Triple Top Swing Joint - Any Inlet/Any Outlet 15 120.10


3 elbow Code 5 elbow Code inlet style inlet size outlet style outlet size

LAS-G165-212 LAS-G165-412 BSP M 1” BSP M 1” I25 - I40

LAS-G16A-212 LAS-G16A-412 BSP M 1” ACME 1 1/4” G35 - G85

LAS-G168-212 LAS-G168-412 BSP M 1” ACME 1 1/2” G835 - G885

LAS-G125-212 LAS-G125-412 Spigot 1” BSP M 1” I25 - I40

LAS-G12A-212 LAS-G12A-412 Spigot 1” ACME 1 1/4” G35 - G85

LAS-G128-212 LAS-G128-412 Spigot 1” ACME 1 1/2” G835 - G885

LAS-G1M5-212 LAS-G1M5-412 ACME 1 1/2” BSP M 1” I25 - I40

LAS-G1MA-212 LAS-G1MA-412 ACME 1 1/2” ACME 1 1/4” G35 - G85

LAS-G1M0-212 LAS-G1M0-412 ACME 1 1/2” ACME 1 1/2” G835 - G885


LAS-G265-212 LAS-G265-412 BSP M 1 1/4” BSP M 1 1/4”

LAS-G260-212 LAS-G260-412 BSP M 1 1/4” ACME 1 1/4” G35 - G85

LAS-G268-212 LAS-G268-412 BSP M 1 1/4” ACME 1 1/2” G835 - G885

LAS-G225-212 LAS-G225-412 Spigot 1 1/4” BSP M 1 1/4”

LAS-G220-212 LAS-G220-412 Spigot 1 1/4” ACME 1 1/4” G35 - G85


LAS-G2M5-212 LAS-G2M5-412 ACME 1 1/2” BSP M 1 1/4”

LAS-G2MA-212 LAS-G2MA-412 ACME 1 1/2” ACME 1 1/4” G35 - G85


swing Joints



1½” Body diameter swing joint



1½” Body Diameter 3 Elbow Swing Joint - Any Inlet/Any Outlet 10 $99.38

1½” Body Diameter 5 Elbow Triple Top Swing Joint - Any Inlet/Any Outlet 10 144.38



LAS-G365-212 LAS-G365-412 BSP M 1 1/2” BSP M 1 1/2” I90

LAS-G360-212 LAS-G360-412 BSP M 1 1/2” ACME 1 1/2” G880 - G885 - G995

LAS-G325-212 LAS-G325-412 Spigot 1 1/2” BSP M 1 1/2” I90


LAS-G3M5-212 LAS-G3M5-412 ACME 1 1/2” BSP M 1 1/2” I90


swing Joints



2" Body diameter swing joint




2” Body Diameter 4 Elbow Swing Joint - Any Inlet/Any Outlet 10 358.19


3" Body diameter swing joint




3” Body Diameter 4 Elbow Swing Joint - Any Inlet/Any Outlet 10 672.03



LAS-G465-312 LAS-G465-912 BSP M 2” BSP M 2”

LAS-G46D-312 LAS-G46D-912 BSP M 2” BSP M 1 1/2”

LAS-G461-312 LAS-G461-912 BSP M 2” Socket 2”

LAS-G425-312 LAS-G425-912 Spigot 2” BSP M 2”

LAS-G42D-312 LAS-G42D-912 Spigot 2” BSP M 1 1/2”

LAS-G421-312 LAS-G421-912 Spigot 2” Socket 2”


LAS-G565-312 LAS-G565-912 BSP M 3” BSP M 3”

LAS-G56E-312 LAS-G56E-912 BSP M 3” BSP M 2”

LAS-G561-312 LAS-G561-912 BSP M 3” Socket 3”

LAS-G525-312 LAS-G525-912 Spigot 3” BSP M 3”

LAS-G52E-312 LAS-G52E-912 Spigot 3” BSP M 2”

LAS-G521-312 LAS-G521-912 Spigot 3” Socket 3”

swing Joints



snaplok QC outlet stabilised swing joint



1” Body Diameter 3 Elbow Swing Joint with Snaplok Fittings - Any Inlet, 3/4” BSPM Outlet 15 $181.97

1” Body Diameter 3 Elbow Swing Joint with Snaplok Fittings - Any Inlet, 1” BSPM Outlet 15 181.97


ACMe test Cap

Code description size Qty/Box list Price

LAS-G548-012 ACME Test Cap 1 1/4” 25 $7.09

LAS-G548-015 ACME Test Cap 1 1/2” 25 7.63

3 elbow Code inle style inlet size outlet style outlet size

LAS-G16T-212 BSP M 1” BSP M 3/4” for Hunter 3 & 33 QC Valves

LAS-G12T-212 Spigot 1” BSP M 3/4” for Hunter 3 & 33 QC Valves

LAS-G1MT-212 ACME 1 1/2” BSP M 3/4” for Hunter 3 & 33 QC Valves

LAS-G16U-212 BSP M 1” BSP M 1” for Hunter 5 QC Valves

LAS-G12U-212 Spigot 1” BSP M 1” for Hunter 5 QC Valves

LAS-G1MU-212 ACME 1 1/2” BSP M 1” for Hunter 5 QC Valves

Accessories



ACMe service fittings: service elbow

ACMe service fittings: service tee

ACMe service fittings: reducing Bushing

ACMe service fittings: double swing tee

Code inlet style inlet size outlet style outlet size Box Qty. Price

LAS-307-251 Socket 2” ACME F 1 1/2” 10 $16.24

LAS-307-337 Socket 3” ACME F 1 1/2” 5 44.97


LAS-302-251 Socket 2” ACME F 1 1/2” 10 $20.31

LAS-302-337 Socket 3” ACME F 1 1/2” 5 60.48


LAS-338-337 Spigot 3” ACME F 1 1/2” 5 $58.25


LAS-305-015 ACME F 1 1/2” ACME F 1 1/2” 10 $20.31

Metric tap't fittings: tap’t saddles

Metric tap't fittings: tap’t hybrid Coupling (end of the line)

Code inlet size outlet style outlet size Box Qty. Price

LAS-7364-J015 63mm ACME F 1 1/2” 5 $57.43

LAS-7364-K015 75mm ACME F 1 1/2” 5 71.02

LAS-7364-L015 90mm ACME F 1 1/2” 5 88.36

Code inlet size outlet style outlet size Box Qty. Price

LAS-P7330-J015 63mm ACME F 1 1/2” 25 $81.77

Accessories



BsPf to ACMe Adaptor: Convert BsP for hunter g series rotor


LAS-G008-132 BSP F 1” ACME M 1 1/4” G35-G85 25 $15.77

LAS-G208-012 BSP F 1 1/4” ACME M 1 1/4” G35-G85 25 14.07

LAS-G308-015 BSP F 1 1/2” ACME M 1 1/2” G835 - G995 25 18.66

HI-475500 BSP F 1” ACME M 1 1/2” G835 - G885 25 25.35

HI-475300 BSP F 1 1/4” ACME M 1 1/2” G835 - G885 25 25.35

HI-107262 BSP F 1 1/2” ACME M 1 1/4” G35-G85 25 17.74

swing Joint: inlet Connectors

swing Joint: outlet elbows


LAS-G120-000 Spigot 1” ACME M 1” 5 $12.15

LAS-G220-000 Spigot 1 1/4” ACME M 1 1/4” 5 14.97

LAS-G320-000 Spigot 1 1/2” ACME M 1 1/2” 5 19.85

LAS-G160-000 BSP M 1” ACME M 1” 5 12.15

LAS-G260-000 BSP M 1 1/4” ACME M 1 1/4” 5 14.97

LAS-G360-000 BSP M 1 1/2” ACME M 1 1/2” 5 19.85

LAS-G001-014 ACME M 1 1/2” ACME M 1” 5 12.15

LAS-G001-016 ACME M 1 1/2” ACME M 1 1/4” 5 14.97

LAS-G001-004 ACME M 1 1/2” ACME M 1 1/2” 5 19.85


LAS-G104-000 ACME F 1” BSP M 1” 5 5 $12.83

LAS-G204-000 ACME F 1 1/4” BSP M 1 1/4” 5 21.45

LAS-G304-000 ACME F 1 1/2” BSP M 1 1/2” 5 23.83

LAS-G108-211 ACME F 1” ACME M 1 1/2” 5 30.46

LAS-G208-212 ACME F 1 1/4” ACME M 1 1/2” 5 39.13

LAS-G100-002 ACME F 1” ACME M 1” 5 25.07

LAS-G200-002 ACME F 1 1/4” ACME M 1 1/4” 5 36.66

LAS-G300-002 ACME F 1 1/2” ACME M 1 1/2” 5 43.70

LAS-G108-132 ACME F 1” ACME M 1 1/4” 5 30.46

Accessories



swing Joint replacement Parts: swing Arm 12”

swing Joint replacement Parts: o-rings

swing Joint replacement Parts: Male Brass stabiliser elbow

swing Joint replacement Parts: snaplok


LAS-G100-212 ACME F 1” ACME M 1” 5 $46.12

LAS-G200-212 ACME F 1 1/4” ACME M 1 1/4” 5 55.16

LAS-G300-212 ACME F 1 1/2” ACME M 1 1/2” 5 69.66

Code description Nominal size (in) Box Qty. Price

LAS-G53010 O-Ring 1” 10 $3.38

LAS-G53012 O-Ring 1 1/4” 10 4.62

LAS-G53015 O-Ring 1 1/2” 10 5.22

Code description swing Joint size outlet size Box Qty. Price

LAS-G001-012 Snaplok Fitting 1” 1” x 3/4” 5 $26.73


LAS-G001-013 ACME F 1” BSP M 3/4” 5 $64.22

LAS-G001-023 ACME F 1” BSP M 1” 5 61.44

Accessories



# #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19Colour Lt Blue Beige Beige gold gold Lime Lime Lavender Lavender grey grey Stripe Beige gold Lime Lavender grey TurquoiseBAR LpM LpM LpM LpM LpM LpM LpM LpM LpM LpM LpM0.4 1.28 1.59 1.89 2.30 2.68 3.10 3.59 4.08 4.61 5.14 5.790.7 1.66 2.04 2.46 2.99 3.48 4.01 4.65 5.29 5.98 6.62 7.451.0 2.00 2.50 2.99 3.63 4.27 4.88 5.71 6.47 7.30 8.09 9.121.4 2.34 2.87 3.48 4.20 4.92 5.63 6.58 7.49 8.44 9.38 10.561.7 2.61 3.22 3.86 4.69 5.52 6.32 7.38 8.36 9.46 10.48 11.812.1 2.87 3.52 4.23 5.14 6.01 6.92 8.09 9.15 10.37 11.46 12.902.8 3.29 4.05 4.88 5.94 6.96 7.98 9.34 10.59 11.96 13.24 14.913.4 3.67 4.54 5.48 6.66 7.79 8.93 10.44 11.84 13.32 14.79 16.69

# #20 #21 #22 #23 #24 #25 #26 #27 #28 #29 #30Colour Turquoise Turquoise yellow yellow Red Red White White Blue Blue dk Brown Stripe yellow Red White Blue dk BrownBAR LpM LpM LpM LpM LpM LpM LpM LpM LpM LpM LpM0.4 6.43 6.96 7.72 8.40 9.23 9.99 10.86 11.61 12.68 13.55 14.490.7 8.28 9.00 9.99 10.82 11.96 12.90 14.00 15.00 16.35 17.48 18.691.0 10.18 11.01 12.22 13.24 14.61 15.78 17.14 18.39 20.02 21.42 22.931.4 11.73 12.71 14.11 15.32 16.88 18.24 19.79 21.23 23.12 24.71 26.451.7 13.13 14.23 15.78 17.10 18.88 20.36 22.14 23.73 25.85 27.63 29.592.1 14.38 15.59 17.25 18.77 20.70 22.33 24.26 26.00 28.31 30.28 32.392.8 16.61 18.01 19.94 21.65 23.88 25.77 28.00 30.65 32.70 34.97 37.433.4 18.54 20.13 22.29 24.22 26.72 28.80 31.33 33.57 36.56 39.13 41.86

# #31 #32 #33 #34 #35 #36 #37 #38 #39 #40 #41Colour dk Brown Orange Orange dk green dk green Purple Purple Black Black dk Turquise dk Turquise

Stripe Orange dk green Purple Black dk Turquise MustardBAR LpM LpM LpM LpM LpM LpM LpM LpM LpM LpM LpM0.4 15.36 16.50 17.60 18.69 19.68 20.07 22.10 23.39 24.68 25.92 27.480.7 19.83 21.50 22.71 24.11 25.43 26.72 28.54 30.16 31.87 33.49 35.471.0 24.26 26.07 29.71 29.56 31.15 32.74 34.97 36.98 39.02 41.02 43.451.4 28.00 30.12 32.13 34.10 35.95 37.77 40.38 42.69 45.08 47.35 50.191.7 31.34 33.68 35.91 38.15 40.19 42.24 45.11 47.72 50.38 52.95 56.092.1 34.32 36.90 39.32 41.78 44.05 46.29 49.43 52.27 55.19 58.02 61.432.8 36.62 42.62 45.42 48.25 50.87 53.44 57.07 60.37 63.74 66.99 70.973.4 44.32 47.65 50.79 53.93 56.85 59.76 63.81 67.48 71.20 74.90 79.33

# #42 #43 #44 #45 #46 #47 #48 #49 #50Colour Mustard Mustard Maroon Maroon Cream Cream dark Blue dark Blue Copper Stripe Maroon Cream dark Blue CopperBAR LpM LpM LpM LpM LpM LpM LpM LpM LpM0.4 28.76 30.13 31.52 33.04 34.51 36.26 37.69 39.02 40.760.7 37.13 38.91 40.68 42.66 44.54 46.78 48.67 50.38 52.641.0 45.45 47.65 49.84 52.23 54.54 57.30 59.61 61.70 64.451.4 52.49 55.03 57.53 60.30 62.98 66.20 68.84 71.23 74.451.7 58.70 61.51 64.34 67.41 70.43 74.00 79.94 79.67 83.232.1 64.30 67.37 70.47 73.85 77.13 81.07 84.32 87.24 91.182.8 74.22 77.82 81.37 85.28 89.09 93.60 97.35 100.76 105.293.4 83.00 86.98 90.99 95.34 99.58 104.66 108.85 112.64 117.71

3tN Nozzle ChArt

technical reference



settleMeNt disCouNt APPlies to PAyMeNt reCeiVed By the 28th of the MoNth folloWiNg the MoNth of disPAtCh

PRODUCTLINE DESCRIPTION INVOICE

SETTLEMENTDISCOUNT

(If applicable)

1900 Hunter MP Rotator® 10%

1900Hunter Products

(inc Hunter Spare Parts)10%

1200Nelson Full Circle Rotators® &

Spinners10%

1300 Nelson Modular Pivot Sprinklers 10%

1400 Nelson Pressure Regulators 10%

1500 Nelson Pivot Drop Components 10%

1600 Nelson 800 Series Control Valves 10%

2000 Nelson Air Valves 10%

1000 Nelson Big Guns® 10%

1100Nelson Low Angle Full Circle

Impact Sprinkler10%

1100 Nelson Part Circle Impact Sprinkler 10%

5000 Nelson Spare Parts 10%

TR Freight Nett 10%

discount structure



AustrAliA (list PriCe exC.gst)

DestinationUp to 1kg

>1kg Up to 3kg

>3kg Up to 5kg

estimatieD transit Days

Up to 10kg

>10kg Up to 20kg

>20kg Up to 30kg

over 30kg (per pallet)

estimateD transit Days

Queensland

Brisbane Metro

12.92 16.91 22.79 Next Day or 2 Days

11.45 11.45 11.45 POA Same Day

South Queensland 21.32 21.32 21.32 POA Next Day

Nth & Central QLD 32.24 32.24 32.24 POA Two Days

New South Wales

Sydney Metro

12.92 16.91 22.79 Next Day or 2 Days

25.20 30.45 61.53 POA Next Day

North Coast 25.20 37.49 68.04 POA Next Day

Country NSW 25.20 37.49 68.04 POA Two Days

Victoria

Melbourne Metro

12.92 16.91 22.79 Next Day or 2 Days

25.20 30.45 59.22 POA Two Days

Melbourne Outer 25.20 41.06 80.96 POA Two Days

Country Victoria 25.20 41.06 80.96 POA Three Days

South Australia

Adelaide Metro

12.92 16.91 22.79 Next Day or 2 Days

25.20 30.45 59.22 POA Three Days

Adelaide Outer 25.20 47.46 89.67 POA Three Days

Country SA 25.20 47.46 89.67 POA Four Days

Western Australia

Perth Metro

12.92 16.91 22.79 Next Day or 2 Days

11.45 11.45 11.45 POA Same Day

Perth Outer 21.32 21.32 21.32 POA Next Day

Country WA 32.24 32.24 32.24 POA Two Days

Tasmania

Hobart Metro

12.92 16.91 22.79 Next Day or 2 Days

25.20 47.46 89.67 POA Four Days

Launceston Metro 25.20 47.46 89.67 POA Four Days

Country Tasmania 25.20 47.46 89.67 POA Five Days

Northern Territory

Darwin

12.92 16.91 22.79 Next Day or 2 Days

32.24 53.97 89.67 POA Four Days

Country NT 32.24 53.97 89.67 POA Five Days

Kununarra (WA) 32.24 53.97 89.67 POA Five Days

NeW zeAlANd (list PriCe exC.gst)

DestinationUp to 5kg

>5kg Up to 10kg

>10kg Up to 20kg


>20kg Up to 50kg

>50kg Up to 100kg

>100kg Up to 150kg

>above 150kg


NORTh ISLANd

Auckland

158.81 165.11 240.35

Next Day

426.80 545.38 596.64 POA Weekend FreightWellington Next Day

Country North Island Next Day

SOUTh ISLANd

Christchurch158.81 165.11 240.35

Next Day426.80 545.38 596.64 POA Weekend

FreightCountry South Island Next Day

Note: Freight rates quoted are NET (ie there in no discount applicable) before settlement discount. Settlement discount is applicable to freight charges. Rates quoted are exclusive of GST (and duty – New Zealand). Freight rates are per consignment or per pallet where noted.

freight schedule



In these terms and conditions “the Company” means Nelson Irrigation Corporation of Australia Pty Ltd ABN 61 064 013 001 (including its successors and assigns) and “Customer” means the buyer whose order for the purchase of Goods is accepted by the Company. “Goods” means all products and services agreed to be supplied by the Company to the Customer under any contract, arrangement order or understanding between the Company and the Customer, whether by way of sale or hire. Each time the Customer places an order with the Company the Customer accepts these Terms and Conditions as governing the supply of the goods or services ordered. Amendments to or deviations from these Terms and Conditions must be agreed in writing by the Company.

1. ACCePtANCe of orders ANd CoNtrACts All orders and contracts accepted or entered into by a representative of the Company are subject to, and shall not be binding on the Company until, acceptance and approval by the Company. The Company reserves the right to accept or reject any order in whole or in part for any reason, including without limitation the unavailability of any goods.

2. deliVery ANd risk2.1 The Company’s policy is to make every effort to ensure prompt delivery of Goods ordered. The Company makes no warranty as to time of delivery or availability of Goods. In the

event of any delay, the Company will affect delivery as soon as practicable.2.2 The Customer acknowledges that the Company shall be under no liability for either direct or consequential loss or damage to the Customer arising from delay or postponement in

delivery. 2.3 Unless otherwise agreed in writing all risk in and to the Goods purchased shall pass to the Customer upon delivery to the Customer or its agent or to a carrier commissioned by the

Customer and any claims for damages or loss onwards cannot be accepted by the Company. 2.4 No claims for damage in transit, shortage of delivery, or loss of goods will be entertained unless, in the case of damage in transit or shortage of delivery, a separate notice in writing

is given to the Company and to the carrier concerned (if any) within seven days of the receipt of goods and, in the case of loss of goods, notice in writing is given to the Company and the carrier concerned (if any) within seven days of the date of the invoice.

2.5 If the Company short supplies any Goods, it will rectify this by supplying the missing items.3. goods returNed for Credit Goods, as listed in our published Price List may be credited if returned to the Company within 30 days of delivery, free into our store in original

packing, in an unsoiled, undamaged and reusable condition. Returns are to be accompanied by a Delivery Docket stating original invoice number, date of purchase and reason for return. A 20% restocking fee will be charged on all Goods returned for credit. No Goods will be accepted for credit after 30 days unless prior arrangement has been made. Goods not listed in our published Price List or which are made to special order are not returnable for Credit.

4. WArrANties, liABility ANd disClAiMer4.1 The Company warrants that its products will be free from original defects in material and workmanship for a period of one year from the original sale when used within the working

specifications for which the product was designed and under normal use and service. Goods sold shall have the benefit of any warranty given by the Manufacturer. The Manufac-turer and the Company assume no responsibility for defect, damage or loss caused by or during installation or removal, or the unauthorised repair, of the Goods.

4.2 The Company’s liability for breach of the terms of this contract, breach of warranty, or breach of a Condition or Warranty implied by the Competition and Consumer Act 2010 (Cth) or otherwise implied into these terms by law shall hereby be limited to one or more of the following remedies, the choice of which is solely at the discretion of the Company: the replacement of the Goods OR the supply of equivalent goods OR repair of the Goods OR payment of the cost of repairing the Goods OR of the cost of replacing the goods or of acquiring equivalent Goods.

4.3 The Company shall under no circumstance be liable in any way whatsoever to the Customer or any other party for any crop losses or other consequential or indirect losses or dam-age of any kind arising directly or indirectly out of the supply, performance or use of the Goods or out of any breach of contract, negligence or other tort.

4.4 To the extent permitted by law, the warranties and remedies contained in this clause 4 exclude and replace all other warranties and remedies, express or implied, whether arising from the Sale Of Goods Act (Qld) 1896, the Competition And Consumer Act 2010 or otherwise, including warranties of merchantability, fitness for particular purposes and all other obligations or liabilities of the Company Or Manufacturer.

4.5 No agent, employee or representative of the Company has authority to waive, alter or add to the provisions of this warranty, nor to make any representations or warranty not contained herein.

4.6 The Purchaser represents to the Company that if a water supply is involved, unless otherwise specified, the water is clean and free of impurities AND that Goods are required for the Customer’s Specifications detailed to the Company and for no other purpose, and agrees to indemnify the Company against all loss and expense suffered and incurred by the Company arising out of the falsity or breach of the said Representations.

5. AdViCe5.1 Any advice, recommendation, information, assistance or service by the Company in relation to the supply of Goods or use thereof is given in good faith and is believed to be ap-

propriate and reliable. The Customer warrants and agrees that it will not rely on any such advice, recommendation, information, assistance or service, but enters into this agreement and acquires the Goods in reliance on its own judgment and with full opportunity to gain independent advice as to the nature and quality of the Goods and their suitability for the Customer’s needs and specifications.

5.2 Any liability arising out of or in respect of such advice, recommendation, information or service provided by the Company is hereby excluded.6. forCe MAJeure The Company shall not be liable for failure or delay to supply the goods due to a cause beyond its control including but not limited to acts of God, strikes, lock

outs or other industrial disturbances, fire, flood, explosion, riot, government interference and the like.7. reteNtioN of title 7.1 As long as the Customer owes the Company any part of the price of Goods supplied at any time, the Company shall retain the legal title to all Goods supplied and not yet used or

resold in the ordinary course of business. 7.2 When such Goods are used, even with the loss of identity, the legal title to the resultant product (“Resultant Products”) shall vest in the Company. 7.3 Where the Company retains title, any Proceeds of sale of such Goods or Resultant Products must be received and kept by the Customer as trustee for the Company, be banked into a

separate account, and be accounted for to the Company on demand.7.4 While such Goods or Resultant Products are in the possession of the Customer, the Customer must retain them in a good and merchantable condition and ensure that they are

stored separately and marked as the property of the Company until paid for in full or collected by the Company, and must allow the Company and/or its servants or agents onto the premises where they are stored for the purpose of ensuring compliance with these terms or collecting the Goods.

8. PAyMeNt ANd defAult8.1 Payment in full for Goods supplied shall be made by the Customer to the Company within 28 days from end of the month in which the Goods are despatched, or as specified by the

Company. Settlement discount where applicable will be disallowed if payment is not made in full by the due date. 8.2 In the event that payment to the Company becomes overdue, the Company may suspend the supply of Goods until the account is brought up to date, elect take immediate posses-

sion of Goods not paid for and /or choose to terminate the contract, without prejudice to any other rights the Company may have and without the Company being liable in any way to any person.

8.3 Without in any way limiting the Company's right to require payment in full on the due date, the Company may at its sole discretion charge interest on overdue accounts at a rate that is 2% above the Company’s prevailing bank overdraft rate, accruing from day to day, from the due date of the relevant invoice up to and including the day the relevant invoice was paid in full.

8.4 The Customer shall pay all costs and expenses (including legal costs on an indemnity basis) incurred by the Company and/or its agents in relation to the recovery of any overdue account. The Customer further acknowledges that those expenses may be calculated on a commission basis at a percentage rate of up to 22% of the amount owing and expressly agrees to pay those expenses. Amounts received by the Company may be applied first against the costs of debt recovery and interest charges, and then to the overdue account.

9. seCurity iNterests ANd PersoNAl ProPerty seCurities ACt 2009 (PPsA)9.1 Terms that are defined in the PPSA have the same meaning in this agreement as in the PPSA.9.2 The Company’s Security Interests under this agreement are continuing interests irrespective of whether there are monies or obligations owing by the Customer at any particular time,

and may be registered by the Company under the PPSA.9.3 The Customer acknowledges that, where any part of the purchase price for Goods remains outstanding, or where amounts are outstanding under a contract for the hire of Goods

(where the hire is a PPS lease or constitutes a Security Interest), the Company shall have registrable Security Interests in:a. Goods to which the Company retains title, including hired Goods;b. Resultant Products to which the Company acquires title;c. The proceeds of any Goods to which a Security Interest attaches under this agreement.

9.4 Where permitted by the PPSA, the Customer:a. waives any rights to receive the notifications, verifications, disclosures or other documentation referred to in the PPSA;b. contracts out of sections 95, 96, 121(4), 125, 129, 130 (to the extent possible), 132(3)(d) and (4), 135, 142 and 143 of the PPSA, and nothing in those sections will apply to the sale of Goodsc. under these Terms;

9.5 Where the Company has rights in addition to those contained in the PPSA, those rights continue to apply.9.6 The Customer must immediately upon the Company’s request, do all things and execute all documents necessary to give effect to and preserve the priority of the security interests

created under these Terms or arising under the PPSA.9.7 The Company may allocate amounts received from the Customer in any manner the Company determines, including in any manner required to preserve any Security Interest.10. PriVACy Authority Where Services are supplied to the Customer on credit the Customer irrevocably authorises the Company, its employees and agents to make such enquiries

as it deems necessary to investigate the credit worthiness of the Customer from time to time including (but without limiting the generality of the foregoing) the making of enquiries of persons nominated as trade referees, the bankers of the Customer or any other credit providers (the information sources) and the Customer hereby authorises the information sources to disclose to the Company such information concerning the Customer which is within their possession and which is requested by the Company.

11. seVerABility If any provision of part thereof is invalid, illegal or incapable of enforcement, then it shall be severed from the remainder of this Agreement, which shall remain in full force and effect unless the basic purpose of this Agreement would thereby be defeated.

12. goVerNiNg lAW Agreements between the parties shall be deemed to be made in Queensland and shall be governed by the law of Queensland.

terms & Conditions

NELSON IRRIGATION CORPORATION OF AUSTRALIA PTy LTDABN 61 064 013 001

BRISBANE - Head Office 20 Macadam Street, SEVENTEEN MILE ROCKS QLD 4073PO Box 3530, MT OMMANEY QLD 4074Tel: 1300 856 368 or 07 3715 8555Fax: 1300 856 369 or 07 3715 8666

PERTH 1/14 Hydro Rise, BIBRA LAKE WA 6163Tel: 08 9434 9600Fax: 08 9434 9700

EMAILGeneral Enquiries [email protected] Service [email protected] Enquiries [email protected] [email protected] [email protected]

NelsoN AustrAliA PriCelist 2016 · Stud Kits ..... 47 On/Off Control ... M0300SW: Bolt on Saddle...

Documents

Transcript of NelsoN AustrAliA PriCelist 2016 · Stud Kits ..... 47 On/Off Control ... M0300SW: Bolt on Saddle...