NEC PNMT Dial Up Setup
description
Transcript of NEC PNMT Dial Up Setup
-
Pnmt Dial up settings
Made By Eng.Faisal Al kathiri
-
Connect your laptop to NE at LCT port via printer cable
-
The windows will open as following, choose "No, not this time.
-
Select Install from a list or specific location [Advanced] and click on [Next].
-
Select "Include this location in the search" and "Browse" and select the location of file (pncom.sys) and select it, then Next
-
Click Continue Anyway in the Hardware Installation pop-up alert.
-
USB Modem Driver Installation starts
-
USB Com Port Driver installation is complete, press Finish
-
Click " Start ", " Settings", "Control Panel" and the" Network Connections"
-
Click Create a new connection
-
The Welcome to the New Connection Wizard window appears. Click Next
-
Select Connect to the network at my workplace and click Next to continue.
-
Select Dial-up connection and click Next to continue
-
Select Modem USB Modem Driver [COM#] and click Next to continue.
-
Insert "Pnmt" and press " Next".
-
Enter any number in the Phone number field and click Next to continue.
-
Verify that Pnmt is displayed as the connection. You can also create a shortcut on your desktop if desired. Click Finish.
-
In the Connect Dial-up Connection window, Click Properties
-
Select Configure
-
Insert 19200 in maximum speed (bps) , uncheck all five boxes and press ok
-
From dial-up connection Proprieties select Options, put marks and options as shown on following snapshot
-
Select Security and select Typical (recommended settings), from Validate my identity as follows select Allow unsecured password
-
Select Networking, at Type of dial-up server I am calling select PPP:Windows 95/98/NT4/2000,Internet, then at This connection uses the following items: select only Internet Protocol (TCP/IP) and QoS Packet Scheduler.
-
Select Settings and uncheck all boxes and press Ok
-
Select Prosperities , select Obtain an IP address automatically and Obtain DNS server address automatically
-
Select Advanced, uncheck Use IP header compression
-
Select Advanced , Settings, and Off and Ok
-
Press Ok and Dial
-
User name admin, Password admin and press login
-
The End
For more information contact at :