ndep.nv.govndep.nv.gov/.../170811-class-1-air-quality-application.docx · Web viewThe application...
Transcript of ndep.nv.govndep.nv.gov/.../170811-class-1-air-quality-application.docx · Web viewThe application...
Class I Air Quality Operating Permit (AQOP), Operating Permit to Construct (OPTC), and Prevention
of Significant Deterioration (PSD) Application Form
Facility Name: Click or tap here to enter text.
Existing Facility ID: AClick or tap here to enter text.
Existing Class I AQOP/OPTC: APClick or tap here to enter text.
Type of Facility: Click or tap here to enter text.
Application Type:☐ New AQOP
☐ Minor Revision of Existing AQOP
☐ Significant Revision of Existing AQOP
☐ Renewal of Existing AQOP
☐ New OPTC
☐ Revision of OPTC
☐ Rollover OPTC to a New AQOP
☐ Rollover OPTC to Existing AQOP
☐ Administrative Revision of Existing AQOP
☐ New PSD AQOP
☐ Major PSD Revision of AQOP
☐ New PSD OPTC
☐ Major PSD Revision of OPTC
Please Submit Application to:Nevada Division of Environmental Protection
Bureau of Air Pollution Control, Class I Permitting Branch901 South Stewart Street, Suite 4001
Carson City, Nevada 89701-5249Phone (775) 687-9349
August 2017
Last Revised – 08/17
Important Information
IMPORTANT INFORMATION
The Application packet contains:
o General Company Information Form o Industrial Process Application Form o Combustion Equipment Application Form o Storage Silo Application Form o Liquid Storage Tanks Application Form o Facility-Wide Potential to Emit Table o Surface Area Disturbance Form o Application Certification Document with Required Attachments
Please see the Guidance Document located at https://ndep.nv.gov/air/permitting/download-permit-forms for additional instructions on how to complete the application.
The application is available from the Nevada Division of Environmental Protection – Bureau of Air Pollution Control (BAPC) in a Microsoft Word file, or on the internet at https://ndep.nv.gov/air/permitting/download-permit-forms. A printed copy of the application must be submitted (mailed or hand delivered), along with an electronic version.
The application filing fee required by Nevada Administrative Code (NAC) 445B.327 must be submitted with the completed application. Checks must be made payable to the “Nevada State Treasurer, Environmental Protection” with “BAPC” noted in the memo line. Fees may also be submitted electronically at https://epayments.ndep.nv.gov/.
This application shall be used for a new, renewal, and revision of Class I sources, including AQOP, OPTC, rollover OPTC, and PSD actions.
An application for a Class I AQOP, OPTC, and PSD must be signed by the Responsible Official, as defined in NAC 445B.156. The certification document (signature page) is the last page of the application and the original “wet” signature must be provided.
All items in the application must be addressed. If an item does not apply “N/A” or similar notation must be entered in the appropriate blank. All other information must be provided. Incomplete applications will be returned to the Responsible Official within:
o 45 days for a new or revision of Class I OPTC. (NAC 445B.3364(1))o 30 days for sources subject to permitting requirements set forth in 40 CFR 52.21 applying
for a new or revision of Class I PSD OPTC. (NAC 445B.3364(2))o 60 days for a new, significant revision, or renewal of Class I AQOP. (NAC
445B.3395(1), NAC 445B.3443(3))o 10 working days for a minor revision of Class I AQOP. (NAC 445B.3395(5))o 30 days for sources subject to permitting requirements set forth in 40 CFR 52.21 applying
for a new of Class I PSD. (NAC 445B.3395(2))o 45 days for an administrative revision of Class I OPTC. (NAC 445B.3441(2) and NAC
445B.3364(1))
Important Information
IMPORTANT INFORMATION (continued)
For the renewal of a Class I Operating Permit, a complete application and corresponding processing fee must be submitted in accordance with NAC 445B.3443(2) at least 240 days prior to the expiration date of the current permit but not earlier than 18 months. The BAPC suggests that the application be submitted well in advance of the timeline outlined in NAC 445B.3443 to ensure the application is deemed complete. The BAPC has 60 days to deem the application complete or incomplete. As stated above, incomplete applications will be returned within 60 days of the receipt of the application. Therefore, the BAPC recommends the application be submitted at least 300 days prior to expiration of the current permit.
For stationary sources subject to the provisions regarding new source review set forth in United States Code (U.S.C.) Title 42 7501 through 7515, inclusive (nonattainment areas), include all information required by U.S.C. Title 42 7503 pursuant to NAC 445B.3363(2)(b)(3).
For a proposed new major source or a proposed major modification to an existing stationary source that is subject to the provisions of 40 CFR 52.21, include all information required by 40 CFR 52.21 pursuant to NAC 445B.3368(3)(a).
For a proposed new major source, or a proposed significant revision to an existing stationary source which is not subject to the provisions of 40 CFR 52.21, include all information as required by NAC 445B.308 through 445B.313, inclusive, pursuant to NAC 445B.3368(3)(b).
For a proposed new major source or a proposed significant revision to an existing stationary source which is subject to the requirements of U.S.C. Title 42 7412 regarding hazardous air pollutants, include all information required by NAC 445B.308 through 445B.313, inclusive, pursuant to NAC 445B.3368(3)(c).
General Company Information Form Page 1 of 4
GENERAL COMPANY INFORMATION FORM
1. Briefly describe the permitted facility's process and include the Standard Industrial Classification (SIC) number. Add details in the attached Process Narrative.
2. Company Name and Address that are to appear on the operating permit [NAC 445B.295(1)]:
Name:Address:City:State: Zip Code:
3. Owner's Name and Address [NAC 445B.295(1)]:
Name:Address:City:State: Zip Code:
4. Facility Name and Address, if different from #2 [NAC 445B.295(1)]:
Name:Address:City:State: Zip Code:
5. If records required under the operating permit will be kept at a location other than the facility, specify that location [NAC 445B.295(7)]:
Name:Address:City:State: Zip Code:
Page 4 of 25
General Company Information Form Page 2 of 4
GENERAL COMPANY INFORMATION FORM (continued)
6. Responsible Official Name, Title and Mailing Address [NAC 445B.295(1)]:
Name:Title:Address:City:State: Zip Code:Phone Number: (xxx) xxx-xxxxFax Number: (xxx) xxx-xxxxE-mail Address:
7. Plant Manager or other appropriate Contact Name, Title and Address [NAC 445B.295(1)]:
Name:Title:Address:City:State: Zip Code:Phone Number: (xxx) xxx-xxxxFax Number: (xxx) xxx-xxxxE-mail Address:
8. Location and Driving Directions to the Facility (For Example: From Elko, Nevada, 4 miles south of I-80 at xx Interchange) [NAC 445B.295(8)]:
Hydrographic Basin (HA) Number: HA Basin Name:
Township(s): N; Range(s):
E;
Section(s):
UTM Coordinates for the Front Gate of the Facility (NAD 83, Zone 11): m North; m East;
Nearest City: County:
Driving Directions from nearest city to the Facility:
Page 5 of 25
General Company Information Form Page 3 of 4
GENERAL COMPANY INFORMATION FORM (continued)
9. Emission Cap Requested [NAC 445B.070, NAC 445B.296(2), NAC 445B.296(3)]:☐ Yes ☐ No (If yes, provide details in the attached Process Narrative)
10. Important note for completing the Industrial Process, Combustion Equipment, Storage Silo, and Liquid Storage Tank Application Forms: forms need to be included for all permitted emission units and insignificant activities. Provide additional forms as needed. All items in the application must be addressed. If an item does not apply, then “N/A” or similar notation (TDB, unknown, etc.) must be entered in the appropriate blank.
11. Check one that applies:☐ Major Stationary Source ☐ Minor Source☐ New Source Review (NSR) Synthetic Minor Source
12. Is the Facility subject to 40 CFR 51.307 and 52.21(p) (i.e., located within 100 km of a Class I Federal Area within Nevada and any adjacent states, for example Jarbidge Wilderness Area) protected by the Regional Haze Program (40 CFR Part 81)?☐ Yes ☐ No
13. Check any of the following that apply to this application:☐ Involve significant changes to the existing requirements for monitoring, reporting, or
recordkeeping.☐ Require or change a determination of an emission limitation or other standard on a case-by-
case basis.☐ Require or change a visibility or increment analysis.☐ Require or change a determination of ambient impact for any temporary source.☐ Establish or change a condition of the operating permit for which there is no a federally
enforceable emissions cap and/or an alternative emission limitation pursuant to U.S.C. Title 42 7412(i)(5).
☐ Result in an increase in allowable emissions that exceeds any of the following specified thresholds: Carbon monoxide, 100 tons per year; Nitrogen oxides, 40 tons per year; Sulfur dioxide (SO2), 40 tons per year; Particulate Matter less than or equal to 10 microns in diameter (PM10), 15 tons per year; Ozone (O3), 40 tons per year of volatile organic compounds (VOC); Sulfuric acid mist, 7 tons per year; and Hydrogen sulfide (H2S), 10 tons per year.
☐ Modification pursuant to any provision of U.S.C. Title 42 7401 to 7515, inclusive, or a major modification at an existing major stationary source.
If any of the boxes were checked above, a minor revision may not be made to the Class I Operating Permit pursuant to NAC 445B.3425.
GENERAL COMPANY INFORMATION FORM (continued)
14. Will the Facility be constructed in more than one phase [NAC 445B.3395(17)]?☐ Yes ☐ No (If yes, provide details in the attached Process Narrative)
Page 6 of 25
General Company Information Form Page 3 of 4
15. Will the facility violate any “Applicable requirement” pursuant to NAC 445B.019?☐ Yes ☐ No
16. Verify facility’s compliance status for the following regulations and describe the reason for exemption if applicable:
FEDERALLY ENFORCEABLE REQUIREMENTSNAC 445B.225 ☐ Compliant ☐ Exempt Reason for ExemptionNAC 445B.315(3)(h) ☐ Compliant ☐ Exempt Reason for ExemptionNAC 445B.315(3)(i) ☐ Compliant ☐ Exempt Reason for ExemptionNAC 445B.315(3)(k) ☐ Compliant ☐ Exempt Reason for Exemption40 CFR 52.21(r)(4) ☐ Compliant ☐ Exempt Reason for ExemptionNAC 445B.252 ☐ Compliant ☐ Exempt Reason for ExemptionNAC 445B.22067 ☐ Compliant ☐ Exempt Reason for ExemptionNAC 445B.22093 ☐ Compliant ☐ Exempt Reason for ExemptionNAC 445B.22037 ☐ Compliant ☐ Exempt Reason for ExemptionNAC 445B.227 ☐ Compliant ☐ Exempt Reason for Exemption40 CFR Parts 60.1-60.19, 61.01-61.19, 61.140-61.157, 63.1-63.15, and 70
☐ Compliant ☐ Exempt Reason for Exemption
40 CFR Part 82 ☐ Compliant ☐ Exempt Reason for ExemptionNAC 445B.230 ☐ Compliant ☐ Exempt Reason for ExemptionNAC 445B.22017 ☐ Compliant ☐ Exempt Reason for Exemption
STATE REQUIREMENTSNRS 445B.470 ☐ Compliant ☐ Exempt Reason for ExemptionNAC 445B.22013 ☐ Compliant ☐ Exempt Reason for ExemptionNAC 445B.326(1) ☐ Compliant ☐ Exempt Reason for ExemptionNAC 445B.22087 ☐ Compliant ☐ Exempt Reason for ExemptionNAC 459.952-459.95528 ☐ Compliant ☐ Exempt Reason for Exemption
Page 7 of 25
Industrial Process Application Form Page 1 of 3
INDUSTRIAL PROCESS APPLICATION FORMCLASS I OPERATING PERMIT
Emission Unit Description:
Alternative Operating Scenario: ☐ Yes ☐ NoInsignificant Activity: ☐ Yes ☐ No If yes, identify exemption regulation:
Description Data
Equipment Description
BAPC Emission Unit ID and System NumberApplicable for Renewal or Revision
eg. Unit ID: S2.001, PF1.001
System Number: 05
Source Classification Code (SCC) e.g. 3-03-024-04 for Conveyors
Manufacturer Date Manufactured Model Number Equipment Dimensions (LxWxH) feet Drop Dimensions (LxWxH)if applicable
feet
The drop height is measured from the ☐ top of the drop length ☐ middle of the drop length ☐ bottom of the drop length, in reference to the ground. Choose one, if applicable
Emissions Released Inside building? yes/no
Location of Emission Source
UTM Northing (NAD 83, Zone 11) m
UTM Easting (NAD 83, Zone 11) m
Operating Parameters
Material Type Processed Operating Time per Day hour/day Operating Time per Year hour/year Hourly Throughput Rate unit/hour Annual Throughput Rate unit/year Batch Process if applicable unit/batch
Start Time if operating less than 24 hours/day hour:minute End Time if operating less than 24 hours/day hour:minute
Control Equipment
Type of Control Control Efficiency % Pollutant(s) Controlled Manufacturer Manufacturer’s Guaranteeincluded? yes/N/A
Stack Parameters
Stack Height feet Stack Inside Diameter feet Stack Temperature ºF Stack Exit Velocity feet/second Actual Gas Volume Flow Rate acfm Dry Gas Volume Flow Rate dscfm Stack Release Type ☐ vertical ☐ capped ☐ horizontal
Page 8 of 25
Industrial Process Application Form Page 2 of 3
INDUSTRIAL PROCESS APPLICATION FORMCLASS I OPERATING PERMIT (continued)
Emission Unit Description:
NOTE: Uncontrolled emissions must ALWAYS be provided.
Description Data
Particulate Matter (PM)
Emissions
Uncontrolled Emission Factor (insert units)
Uncontrolled Emission Factor ReferenceUncontrolled Emission Limit pound/hour
Uncontrolled Emission Limit ton/year
Controlled Emission Factor (insert units)
Controlled Emission Factor ReferenceControlled Emission Limit pound/hour
Controlled Emission Limit ton/year
Particulate Matter as PM10
Emissions
Uncontrolled Emission Factor (insert units) Uncontrolled Emission Factor ReferenceUncontrolled Emission Limit pound/hour Uncontrolled Emission Limit ton/year Controlled Emission Factor (insert units)
Controlled Emission Factor ReferenceControlled Emission Limit pound/hour
Controlled Emission Limit ton/year
Particulate Matter as PM2.5
Emissions
Uncontrolled Emission Factor (insert units) Uncontrolled Emission Factor ReferenceUncontrolled Emission Limit pound/hour Uncontrolled Emission Limit ton/year Controlled Emission Factor (insert units)
Controlled Emission Factor ReferenceControlled Emission Limit pound/hour
Controlled Emission Limit ton/year
Other Pollutants
Pollutant NameUncontrolled Emission Factor (insert units)
Uncontrolled Emission Factor ReferenceUncontrolled Emission Limit pound/hour
Uncontrolled Emission Limit ton/year
Controlled Emission Factor (insert units)
Controlled Emission Factor ReferenceControlled Emission Limit pound/hour
Controlled Emission Limit ton/year
Page 9 of 25
Industrial Process Application Form Page 3 of 3
INDUSTRIAL PROCESS APPLICATION FORMCLASS I OPERATING PERMIT (continued)
Emission Unit Description:
1. Subject to a Federal Regulation specific to the emission unit (e.g. 40 CFR Part 60, 61, 63, 64, 76, or other): ☐ Yes ☐ No If yes, identify regulation and applicability and include required analysis or plans (e.g. siting analysis or Continuous Assurance Monitoring (CAM) plans).
2. Subject to a State Regulation specific to the emission unit (e.g. NAC 445B.22033, NAC 445B.22017): ☐ Yes ☐ No If yes, identify regulation and applicability.
3. Identify standards for work practices which affect emissions for all regulated air pollutants (e.g. At all times, including startup, shutdown and malfunction).
4. Identify and describe compliance and performance testing with reference to any applicable test methods, monitoring devices, compliance plan, or other activities required to determine compliance with an applicable requirement (e.g. Emissions from this unit will be monitored by CEMS and/or COMS for the specific pollutant(s) (NOX, CO, etc.)).
Page 10 of 25
Combustion Equipment Application Form Page 1 of 5
COMBUSTION EQUIPMENT APPLICATION FORMCLASS I OPERATING PERMIT
Emission Unit Description:
Alternative Operating Scenario: ☐ Yes ☐ NoInsignificant Activity: ☐ Yes ☐ No If yes, identify exemption regulation:
Description Data
Equipment Description
BAPC Emission Unit ID and System Number Applicable for Renewal or Revision
eg. Unit ID: S2.001System Number: 05
Source Classification Code (SCC) e.g. 3-03-024-04 for Conveyors
Manufacturer Date Manufactured Model and Serial Number Max Design Heat Input [NAC 445B.3135] MMBtu/hour
Emissions Released Inside building? yes/no
For Reciprocating
Internal Combustion
Engines (RICE) Only
Max Design Horsepower Output hp (kW)
Type of Engine Code (See Notes*)
Date Constructed month/day/yr
Cylinder Displacement liter/cylinder
EPA Tier # Location of Emission Source
UTM Northing (NAD 83, Zone 11) m
UTM Easting (NAD 83, Zone 11) m
Operating Parameters /Fuel Usage
Fuel Type Operating Time per Day hour/day Operating Time per Year hour/year Hourly Usage Rate Maximum
Provide Equipment Specifications unit/hour
Annual Usage Rate Maximum unit/year Sulfur Content % Heat Content Btu/unit Start Time if operating less than 24 hours/day hour:minute End Time if operating less than 24 hours/day hour:minute
Notes*Code Description Code DescriptionLU Limited Use E-SI Emergency Spark IgnitionLDG Landfill/Digester Gas SI4SRB Spark Ignition 4-Stroke Rich BurnNECI Non-Emergency Compression Ignition SI4SLB Spark Ignition 4-Stroke Lean BurnECI Emergency Compression Ignition SI2SLB Spark Ignition 2-Stroke Lean Burn
Page 11 of 25
Combustion Equipment Application Form Page 2 of 5
COMBUSTION EQUIPMENT APPLICATION FORMCLASS I OPERATING PERMIT (continued)
Emission Unit Description:
NOTE: Uncontrolled emissions must ALWAYS be provided.
Description Data
Control Equipment
Type of Control Control Efficiency % Pollutant(s) Controlled Manufacturer Manufacturer’s Guarantee Included? yes/N/A
Stack Parameters
Stack Height feet Stack Inside Diameter feet Stack Temperature ºF Stack Exit Velocity feet/second Actual Gas Volume Flow Rate acfm Dry Gas Volume Flow Rate dscfm Stack Release Type ☐ vertical ☐ capped ☐ horizontal
Particulate Matter (PM)
Emissions
Uncontrolled Emission Factor (insert units) Uncontrolled Emission Factor Reference Uncontrolled Emission Limit pound/hour Uncontrolled Emission Limit ton/year
Controlled Emission Factor (insert units)
Controlled Emission Factor ReferenceControlled Emission Limit pound/hour
Controlled Emission Limit ton/year
Particulate Matter as PM10
Emissions
Uncontrolled Emission Factor (insert units) Uncontrolled Emission Factor ReferenceUncontrolled Emission Limit pound/hour
Uncontrolled Emission Limit ton/year
Controlled Emission Factor (insert units) Controlled Emission Factor ReferenceControlled Emission Limit pound/hour
Controlled Emission Limit ton/year
Particulate Matter as PM2.5
Emissions
Uncontrolled Emission Factor (insert units) Uncontrolled Emission Factor Reference Uncontrolled Emission Limit pound/hour Uncontrolled Emission Limit ton/year
Controlled Emission Factor (insert units)
Controlled Emission Factor ReferenceControlled Emission Limit pound/hour
Controlled Emission Limit ton/year
Page 12 of 25
Combustion Equipment Application Form Page 3 of 5
COMBUSTION EQUIPMENT APPLICATION FORMCLASS I OPERATING PERMIT (continued)
Emission Unit Description:
NOTE: Uncontrolled emissions must ALWAYS be provided.
Description Data
Sulfur Dioxide (SO2) Emissions
Uncontrolled Emission Factor (insert units) Uncontrolled Emission Factor ReferenceUncontrolled Emission Limit pound/hour Uncontrolled Emission Limit ton/year
Controlled Emission Factor (insert units)
Controlled Emission Factor ReferenceControlled Emission Limit pound/hour
Controlled Emission Limit ton/year
Oxides of Nitrogen (NOX)
Emissions
Uncontrolled Emission Factor (insert units) Uncontrolled Emission Factor ReferenceUncontrolled Emission Limit pound/hour Uncontrolled Emission Limit ton/year
Controlled Emission Factor (insert units)
Controlled Emission Factor Reference Controlled Emission Limit pound/hour
Controlled Emission Limit ton/year
Carbon Monoxide (CO)
Emissions
Uncontrolled Emission Factor (insert units) Uncontrolled Emission Factor ReferenceUncontrolled Emission Limit pound/hour Uncontrolled Emission Limit ton/year
Controlled Emission Factor (insert units)
Controlled Emission Factor Reference Controlled Emission Limit pound/hour
Controlled Emission Limit ton/year
Volatile Organic Compounds
(VOC) Emissions
Uncontrolled Emission Factor (insert units) Uncontrolled Emission Factor Reference Uncontrolled Emission Limit pound/hour Uncontrolled Emission Limit ton/year
Controlled Emission Factor (insert units)
Controlled Emission Factor ReferenceControlled Emission Limit pound/hour
Controlled Emission Limit ton/year
Page 13 of 25
Combustion Equipment Application Form Page 4 of 5
COMBUSTION EQUIPMENT APPLICATION FORMCLASS I OPERATING PERMIT (continued)
Emission Unit Description:
NOTE: Uncontrolled emissions must ALWAYS be provided.
Description Data
Greenhouse Gases (CO2e)
Emissions
Component Carbon Dioxide (CO2)
Nitrous Oxide (N2O)
Methane (CH4)
Uncontrolled Emission Factor (insert units) Uncontrolled Emission Factor Reference Uncontrolled Emission Limit pound/hour Uncontrolled Emission Limit ton/year
Hazardous Air Pollutants
(HAPs) EmissionsCombined
Uncontrolled Emission Factor Reference Uncontrolled Emission Limit pound/hour Uncontrolled Emission Limit ton/year
Controlled Emission Factor ReferenceControlled Emission Limit pound/hour
Controlled Emission Limit ton/year
OtherPollutants
Uncontrolled Emission Factor (insert units)
Uncontrolled Emission Factor Reference Uncontrolled Emission Limit pound/hour
Uncontrolled Emission Limit ton/year Pollutant NameControlled Emission Factor (insert units)
Controlled Emission Factor ReferenceControlled Emission Limit pound/hour
Page 14 of 25
Combustion Equipment Application Form Page 5 of 5
COMBUSTION EQUIPMENT APPLICATION FORMCLASS I OPERATING PERMIT (continued)
Emission Unit Description:
1. Subject to a Federal Regulation specific to the emission unit (e.g. 40 CFR Part 60, 61, 63, 64, 76, or other): ☐ Yes ☐ No If yes, identify regulation and applicability and include required analysis or plans (e.g. siting analysis or Continuous Assurance Monitoring (CAM) plans).
2. Subject to a State Regulation specific to the emission unit (e.g. NAC 445B.2203, NAC 445B.22047, NAC 445B.22017): ☐ Yes ☐ No If yes, identify regulation and applicability.
3. Identify standards for work practices which affect emissions for all regulated air pollutants (e.g. At all times, including startup, shutdown and malfunction).
4. Identify and describe compliance and performance testing with reference to any applicable test methods, monitoring devices, compliance plan, or other activities required to determine compliance with an applicable requirement (e.g. Emissions from this unit will be monitored by CEMS and/or COMS for the specific pollutant(s) (NOX, CO, etc.)).
Page 15 of 25
Storage Silo Application Form Page 1of 3
STORAGE SILO APPLICATION FORMCLASS I OPERATING PERMIT
Emission Unit Description:
Alternative Operating Scenario: ☐ Yes ☐ NoInsignificant Activity: ☐ Yes ☐ No If yes, identify exemption regulation:
Description DataSilo Loading Silo Unloading
Equipment Description
BAPC Emission Unit ID and System NumberApplicable for Renewal or Revision
eg. Unit ID: S2.001, PF1.001
System Number: 05
Source Classification Code (SCC) e.g. 3-03-024-04 for Conveyors
Manufacturer Date Manufactured Model Number Equipment Dimensions (LxWxH)
feet
Drop Dimensions (LxWxH) if applicable
feet
Emissions Released Inside building? yes/no
Location of Emission Source
UTM Northing (NAD 83, Zone 11) m
UTM Easting (NAD 83, Zone 11) m
Operating Parameters
Material Type Processed Operating Time per Day hour/day Operating Time per Year hour/year Hourly Throughput Rate unit/hour Annual Throughput Rate unit/year Batch Process if applicable unit/batch
Start Time if operating less than 24 hours/day
hour:minute
End Time if operating less than 24 hours/day
hour:minute
Control Equipment
Type of Control Control Efficiency % Pollutant(s) Controlled Manufacturer Manufacturer’s Guarantee Included? yes/N/A
Page 16 of 25
Storage Silo Application Form Page 2 of 3
STORAGE SILO APPLICATION FORMCLASS I OPERATING PERMIT (continued)
Emission Unit Description:
NOTE: Uncontrolled emissions must ALWAYS be provided.
Description DataSilo Loading Silo Unloading
Stack Parameters
Stack Height feet Stack Inside Diameter feet Stack Temperature ºF Stack Exit Velocity feet/second Actual Gas Volume Flow Rate acfm Dry Gas Volume Flow Rate dscfm Stack Release Type Vertical/Capped/
Horizontal
Particulate Matter (PM)
Emissions
Uncontrolled Emission Factor (insert units) Uncontrolled Emission Factor Reference Uncontrolled Emission Limit pound/hour Uncontrolled Emission Limit ton/year
Controlled Emission Factor (insert units)
Controlled Emission Factor ReferenceControlled Emission Limit pound/hour
Controlled Emission Limit ton/year
Particulate Matter as PM10
Emissions
Uncontrolled Emission Factor (insert units) Uncontrolled Emission Factor Reference Uncontrolled Emission Limit pound/hour Uncontrolled Emission Limit ton/year
Controlled Emission Factor (insert units)
Controlled Emission Factor ReferenceControlled Emission Limit pound/hour
Controlled Emission Limit ton/year
Particulate Matter as PM2.5
Emissions
Uncontrolled Emission Factor (insert units) Uncontrolled Emission Factor Reference Uncontrolled Emission Limit pound/hour Uncontrolled Emission Limit ton/year
Controlled Emission Factor (insert units)
Controlled Emission Factor ReferenceControlled Emission Limit pound/hour
Controlled Emission Limit ton/year
Other Pollutants
Pollutant Name Uncontrolled Emission Factor (insert units) Uncontrolled Emission Factor Reference Uncontrolled Emission Limit pound/hour Uncontrolled Emission Limit ton/year
Controlled Emission Factor (insert units)
Controlled Emission Factor ReferenceControlled Emission Limit pound/hour
Controlled Emission Limit ton/year
Page 17 of 25
Storage Silo Application Form Page 3 of 3
STORAGE SILO APPLICATION FORMCLASS I OPERATING PERMIT (continued)
Emission Unit Description:
1. Subject to a Federal Regulation specific to the emission unit (e.g. 40 CFR Part 60, 61, 63, 64, 76, or other):☐ Yes ☐ No If yes, identify regulation and applicability and include required analysis or plans (e.g. siting analysis or Continuous Assurance Monitoring (CAM) plans).
2. Subject to a State Regulation specific to the emission unit (e.g. NAC 445B.2203, NAC 445B.22047, NAC 445B.22033, NAC 445B.22017): ☐ Yes ☐ No If yes, identify regulation and applicability.
3. Identify standards for work practices which affect emissions for all regulated air pollutants (e.g. At all times, including startup, shutdown and malfunction).
4. Identify and describe compliance and performance testing with reference to any applicable test methods, monitoring devices, compliance plan, or other activities required to determine compliance with an applicable requirement (e.g. Emissions from this unit will be monitored by CEMS and/or COMS for the specific pollutant(s) (NOX, CO, etc.)).
Page 18 of 25
Liquid Storage Tank Application Form Page 1 of 3
LIQUID STORAGE TANK APPLICATION FORMCLASS I OPERATING PERMIT
Emission Unit Description:
Alternative Operating Scenario: ☐ Yes ☐ NoInsignificant Activity: ☐ Yes ☐ No If yes, identify exemption regulation:
Description Data
Equipment Description
BAPC Emission Unit ID and System NumberApplicable for Renewal or Revision
eg. Unit ID: S2.001, PF1.001
System Number: 05
Source Classification Code (SCC)
e.g. 3-03-024-04 for Conveyors
Manufacturer Date Manufactured Model Number Heated Tank yes/no Shell Height feet Shell Diameter feet Maximum Liquid Height feet Average Liquid Height feet Capacity of Tank gallons Shell Color Shell Condition good/poor Roof Type (Cone, Dome, External, or Internal Floating Roof)
Roof Height feet Roof ColorCone Roof Slope Dome Roof Radius feet True Vapor Pressure of Liquid psig
Reid Vapor Pressure of Liquid psig
Orientation of Tank Horizontal/Vertical Submerged Fill[NAC 445B.22093(3)]
yes/no
Equipment Dimensions (LxWxH)
feet
Location of Emission Source
UTM Northing(NAD 83, Zone 11)
m
UTM Easting (NAD 83, Zone 11)
m
Page 19 of 25
Liquid Storage Tank Application Form Page 2 of 3
LIQUID STORAGE TANK APPLICATION FORMCLASS I OPERATING PERMIT (continued)
Emission Unit Description:
Description Data
Operating Parameters
Material Type Operating Time per Year hour/year Maximum Throughput gallon/month
Maximum Throughput gallon/year
Control Equipment
Type of Control Control Efficiency % Pollutant(s) Controlled Manufacturer Manufacturer’s Guarantee Included?
yes/NA
Volatile Organic
Compounds (VOC)
Emissions
Emission Limit ton/year
Other Pollutants
Emission Factor (with units) (insert units) Emission Factor Reference Emission Limit pound/hour Emission Limit ton/year
Page 20 of 25
Liquid Storage Tank Application Form Page 3 of 3
LIQUID STORAGE TANKS APPLICATION FORMCLASS I OPERATING PERMIT (continued)
Emission Unit Description:
1. Subject to a Federal Regulation specific to the emission unit (e.g. 40 CFR Part 60, 61, 63, 64, 76, or other): ☐ Yes ☐ No If yes, identify regulation and applicability and include required analysis or plans (e.g. siting analysis or Continuous Assurance Monitoring (CAM) plans).
2. Subject to a State Regulation specific to the emission unit (e.g. NAC 445B.2203, NAC 445B.22047, NAC 445B.22033, NAC 445B.22017, NAC 445B.3363(1)(g): ☐ Yes ☐ No If yes, identify regulation and applicability.
3. Identify standards for work practices which affect emissions for all regulated air pollutants (e.g. At all times, including startup, shutdown and malfunction).
4. Identify and describe compliance and performance testing with reference to any applicable test methods, monitoring devices, compliance plan, or other activities required to determine compliance with an applicable requirement (e.g. Emissions from this unit will be monitored by CEMS and/or COMS for the specific pollutant(s) (NOX, CO, etc.)).
Page 21 of 25
FACILITY-WIDE POTENTIAL TO EMIT TABLE(FOR ALL SOURCES INCLUDING INSIGNIFICANT ACTIVITIES)
(POUND/HOUR AND TON/YEAR)
Pollutant Facility-Wide Potential to Emit (pound/hour)
Facility-Wide Potential to Emit (ton/year)
Total Particulate Matter (PM)Total PM10
Total PM2.5
Total Sulfur Dioxide (SO2)Total Carbon Monoxide (CO)Total Oxides of Nitrogen (NOX)Total Volatile Organic Compounds (VOC)Total Lead (Pb)Total Hydrogen Sulfide (H2S)Total Sulfuric Acid Mist (H2SO4)Total Hazardous Air Pollutants (HAPs)Total Greenhouse Gases (CO2e)
Other Regulated Pollutants (Specify)
REVISION TABLE
Please complete the table below if this application is for a Minor/Significant Revision of an existing Class I Air Quality Operating Permit. Add more columns if needed for any other applicable regulated pollutants. All Potential To Emit (PTE) values must be in tons per year (TPY) [NAC 445B.3425 and NAC 445B.344]
DescriptionPollutants
PM PM10 PM2.5 SO2 NOx CO VOC HAPs CO2eOther_____
Permitted Facility-Wide PTE (TPY)Proposed
Facility-Wide PTE (TPY)Change in
Facility-Wide PTE (TPY)
Page 22 of 25
SURFACE AREA DISTURBANCE FORM
1. Total Acres of the Facility Site: Click or tap here to enter text. 2. Total Acres Disturbed: Click or tap here to enter text.3. Add Surface Area Disturbance location as Township(s), Range(s) and Section
Click or tap here to enter text.4. NAC 445B.22037 requires fugitive dust to be controlled (regardless of the size or amount of acreage
disturbed), and requires an ongoing program, using best practical methods, to prevent particulate matter from becoming airborne. All activities which have the potential to adversely affect the local air quality must implement all appropriate measures to limit controllable emissions. Appropriate measures for dust control may consist of a phased approach to acreage disturbance rather than disturbing the entire area all at once; using wet suppression through such application methods as water trucks or water spray systems to control wind-blown dust; the application of soil binding agents or chemical surfactant to roadways and areas of disturbed soil; as well as the use of wind-break or wind limiting fencing designed to limit wind erosion soils.
5. If the Surface Area Disturbance is greater than 5 acres, please check each box that applies for Best Management Practices (BMPs) used for controlling dust on project’s disturbed areas:
☐ Water trucks☐ Graveling/paving of roadway storage areas and staging areas☐ Dust palliatives☐ Posting and limiting vehicle speeds to 10-15 miles per hour☐ Ceasing operations during high wind events☐ Fencing or berming to prevent unauthorized access to disturbed areas☐ Application of water sprays on material storage piles on a regular basis☐ Covering material storage piles with tarpaulin or geo-textiles; tenting☐ Use of overhead water spray racks or water hoses☐ Track-out controls (graveled entranced, exit area, and street sweeping)☐ Landscape preservation and impact avoidance☐ Wind fence☐ Pre-watering of areas to be disturbed (including all unpaved onsite roads and staging areas)☐ Inform all subcontractors (including truck drivers) of their responsibilities for the control of
fugitive dust while they are on the project site☐ Training of equipment operators to recognize fugitive dust generation and having the
authority to shut down operations until water truck arrives and sprays water on the disturbed areas
☐ Other Applicable BMPs: Click or tap here to enter text.☐ Other Applicable BMPs: Click or tap here to enter text.☐ If using water trucks, list how many water trucks are used and their capacity in gallons:
Click or tap here to enter text.
Page 23 of 25
APPLICATION CERTIFICATION DOCUMENT(With Required Attachments)
Please check all applicable boxes below to indicate the information provided in your application submittal:
☐ General Company Information Form☐ Compliance Plan☐ Industrial Process Application Form(s)☐ Combustion Equipment Application Form(s)☐ Storage Silo Application Form(s)☐ Liquid Storage Tank Application Form(s)☐ Facility-Wide Potential to Emit Table☐ Revision Table☐ Surface Area Disturbance Form☐ Detailed Emission Calculations (for all emission units including IA units)☐ Process Narrative (revision applications must include a description of the revision)☐ Process Flow Diagram(s)☐ Site Plan(s) showing the locations (UTM coordinates), dimensions, and heights of buildings
on the site☐ Maps:
☐ Vicinity Map of where the facility is located in the State ☐ Area Map of the Facility (including location of all emission units, location of front
gate, and fence line) ☐ Environmental Evaluation (AERMOD Air Dispersion Modeling) [NAC 445B.310] ☐ Manufacturer’s Guarantee if applicable
☐ Equipment Specifications if applicable
☐ TANKs Modeling Output if applicable
☐ Application Fee Attached or Electronically Submitted☐ Digital Copy of Application on CD or Thumb Drive☐ Application Certification Document with Original Responsible Official Signature
Page 24 of 25
PLEASE NOTE THE FOLLOWING REQUIREMENTS WHICH APPLY TO PERMIT APPLICANTS DURING THE APPLICATION PROCESS:
A. A permit applicant must submit supplementary facts or corrected information upon discovery [NAC 445B.297.1(b)].
B. A permit applicant is required to provide any additional information which the Director requests in writing within the time specified in the Director's request [NAC 445B.297.1(c)].
C. Submission of fraudulent data or other information may result in prosecution for an alleged criminal offense [NRS 445B.470].
CERTIFICATION:
I certify that, based on information and belief formed after reasonable inquiry, the statements and information contained in this application are true, accurate and complete.
Signature of Responsible Official
Print or Type Name and Title
Date
Page 25 of 25