NCS Workshop
-
Upload
lucky2getbobby -
Category
Documents
-
view
226 -
download
0
Transcript of NCS Workshop
-
8/3/2019 NCS Workshop
1/23
16/01/200ESM/GN/R Affandy Johan
A practical guide
Affandy Johan
Neighbouring Cell Support (NCS)
-
8/3/2019 NCS Workshop
2/23
ESM/GN/R Affandy Johan 16/01/2002
Introduction
Part of the RNO (Radio Network Optimization) tool
To help maintain well working neighbouring cell list in
network Data is collected through Measurement reports
NCS is operated through OSS.
-
8/3/2019 NCS Workshop
3/23
ESM/GN/R Affandy Johan 16/01/20026
Why use NCS?
y Trouble shooting.
Missing neighbouring cell relations can be detected.
y Supervision.
It is possible to constantly evaluate the neighbouring cell
relations.
y Planning areas with new cells.
It is possible for NCS to evaluate new cell relations when
new cells are added to the network.
NCS and NOXNCS and NOX -- Finding the right neighbors.Finding the right neighbors.
-
8/3/2019 NCS Workshop
4/23
ESM/GN/R Affandy Johan 16/01/2002
OSSOSSMeasurementReports
NCS is a tool for identification and implementation of optimizedNCS is a tool for identification and implementation of optimized
neighbor cell lists (finding the best/worst neighbors).neighbor cell lists (finding the best/worst neighbors).
-
8/3/2019 NCS Workshop
5/23
ESM/GN/R Affandy Johan 16/01/2002
Background
Handover decision are based on measurement reports by
MS on active mode
MS measures SS of frequencies in BA List and decodes the
BSIC
Six strongest frequencies where BSIC was decoded is sent
back to BSC.
Since a mobile can be within reach of several cells, it is of
great importance to select a cell with satisfactoryconnectivity for good handovers
-
8/3/2019 NCS Workshop
6/23
ESM/GN/R Affandy Johan 16/01/2002
NCS Concept
NCS initiates the Active BA-list Recording (BAR) in BSC
The BAR modify the selected cell BA-list, to include test
frequencies. MS measures the defined frequencies in its neighbour list
+ test frequencies
Result are recorded in NCS and presented in several
report formats.
-
8/3/2019 NCS Workshop
7/23
ESM/GN/R Affandy Johan 16/01/2002
NCS Strength
Effective decision support for Neighbour Relation - based
on true measurement
Saves time and energy - less time needed to go out to thefield, more time to optimize the network
User friendly - easy to use
Can help for areas where drivetest is not possible
Gives better understanding of the network structure
All this means better quality networkAll this means better quality network
-
8/3/2019 NCS Workshop
8/23
ESM/GN/R Affandy Johan 16/01/2002
NCS Relation in OSS
-
8/3/2019 NCS Workshop
9/23
ESM/GN/R Affandy Johan 16/01/2002
NCS Workflow
-
8/3/2019 NCS Workshop
10/23
ESM/GN/R Affandy Johan 16/01/2002
Defining NCS Recording
The recording configuration consists of:
Cell set - cells that are to be recorded.
Frequencies to be recorded
Time schedule - when recordings should be made.
elative signal strength threshold.
Absolute signal strength threshold.
Length of recording segments - how often the test frequency
numbers in the Active BA List should be changed
Number of test frequencies to add to the active mode BA
lists at one time
-
8/3/2019 NCS Workshop
11/23
ESM/GN/R Affandy Johan 16/01/2002
1. Give a recording name
2. Define Relative & Abs SS3. Define Interval & no. of test freq.
4. Define Start time &
period
5. Select or define new
cell set
6. Select test frequencies
7. Save & schedule
-
8/3/2019 NCS Workshop
12/23
ESM/GN/R Affandy Johan 16/01/2002
NCS Recording
For measured BSIC/BCCH to be valid -
SS must be > -100 dBm
if < -100dBm : only counted if SS >10dB weaker than serving cell
SSf,BSIC> SSserv + Urel
where Urel= Relative SS
SSf,BSIC
> Uabs where Uabs = Absolute SS
-
8/3/2019 NCS Workshop
13/23
ESM/GN/R Affandy Johan 16/01/2002
RNOWindow
-
8/3/2019 NCS Workshop
14/23
ESM/GN/R Affandy Johan 16/01/2002
Recording Evaluation
NCS Reports:
1.) NCS Overview report
2.) NCS Cell Report
3.) NCS Cell report Chart
4.) NCS Detailed cell Report
-
8/3/2019 NCS Workshop
15/23
ESM/GN/R Affandy Johan 16/01/2002
Reports - NCS Overview report Summary for each measured cell
User can identify which cell looks needs further
investigation
-
8/3/2019 NCS Workshop
16/23
ESM/GN/R Affandy Johan 16/01/2002
Reports - NCS Cell Report
2 parts:
Defined neigh. Freq.
Undefined Freq. (test
freq.) Gives the probable
measured cell name
-
8/3/2019 NCS Workshop
17/23
ESM/GN/R Affandy Johan 16/01/2002
Reports - NCS Cell Report Chart
-
8/3/2019 NCS Workshop
18/23
ESM/GN/R Affandy Johan 16/01/2002
Reports - NCS Detailed Cell Report
-
8/3/2019 NCS Workshop
19/23
ESM/GN/R Affandy Johan 16/01/2002
Missing relationship
-
8/3/2019 NCS Workshop
20/23
ESM/GN/R Affandy Johan 16/01/2002
After adding the neighbour relationship
OUTINCELL DATE PERIOD PERLEN EXCHID HOVERCNT H_SUC
LZ0105B-LZ0113B 020114 1000-1900 540 1BSC4 439.00 98.18
LZ0113B-LZ0105B 020114 1000-1900 540 1BSC4 409.00 99.02
NCS gives reliable results!!NCS gives reliable results!!
-
8/3/2019 NCS Workshop
21/23
ESM/GN/R Affandy Johan 16/01/2002
NCS Summary
Shows which neighbour to add
Recordings are done using OSS
Results are based on real network measurements - notpredictions or guess work!
All active mobiles contribute to the measurements
NCS gives fast & reliable results, which means more efficient
and faster network improvement
NCS gives fast & reliable results, which means more efficient
and faster network improvement
-
8/3/2019 NCS Workshop
22/23
ESM/GN/R Affandy Johan 16/01/2002
QUESTIONS?QUESTIONS?
-
8/3/2019 NCS Workshop
23/23
ESM/GN/R Affandy Johan 16/01/2002
NOX - Neighbor Optimization eXpert
Uses NCS to find out which relations to add
Uses many days of STS to find out which relations to
delete
Two main modes: Recommendation (suggestions are given to user)
Automatic(same as Recommendation except change orders are
sent to CNA for implementation later the same night)