NC1

NC1 IS A TWO-COMPONENT PRODUCT WHICH COULD BE EASILY RECOGNIZED BY IT'S MILKY COLOR. PRIOR TO WORKING, THE PRODUCT SHOULD BE SHAKEN. CANS AND BOTTLES TO BE SHAKEN WELL BEFORE USAGE AS WELL. NC1 EASILY CLEANS AND SEALS SURFACES, LEAVING A THIN WAX COATING.

NC1 OBJECTS FOR CLEANING

NC1 IS A LIQUID BIODEGRADABLE DETERGENT, WHICH IS USED ON SMALL SURFACES USING THE SPRAY PUMP.

POLISHED INTERIOR SURFACES

CORRIDORS, DOOR AREAS AND STAIRWAYS CAN EASILY BE CLEAN TO SHINE WITH NC1 AND TWO MICROFIBER TOWELS.THERE IS NO NEED OF WATER USAGE. SIMPLY SPRAY AMOUNT ON THE SURFACE AND USE ONE OF THE MICROFIBER CLOTH, MOVING IT IN THE SAME DIRECTION, AND THE OTHER ONE USE FOR POLISHING. THAT IS HOW EASY IT IS!

IT IS AN EASY AND FAST PROCESS THAT CAN AS WELL REMOVE FINGERPRINTS AND OTHER SPOTS. ALTERNATIVELY NC1 CAN BE USED ON LARGER SURFACES USING A FOAM SPRAYERFOR CLEANING WITH THE SPECIAL SYSTEM OF NOBELCLEAN.AS WELL AS IN THE PREVIOUS EXAMPLE, YOU CAN SPRAY THE FOAM, CLEAN IT WITH A DAMP SPONGE, WIPE WITH A MICROFIBER CLOTH OR JUST FLUSH WITH CLEAN WATER.CAUTION -- MAKE SURE TO POLISH THE SURFACE WITH MICROFIBER CLOTH AFTER APPLYING NC1, OTHERWISE, YOU MAY DISCOVER SPOTS.

IT IS AN EASY AND FAST PROCESS THAT CAN AS WELL REMOVE FINGERPRINTS AND OTHER SPOTS. ALTERNATIVELY NC1 CAN BE USED ON LARGER SURFACES USING A FOAM SPRAYERFOR CLEANING WITH THE SPECIAL SYSTEM OF NOBELCLEAN.AS WELL AS IN THE PREVIOUS EXAMPLE, YOU CAN SPRAY THE FOAM, CLEAN IT WITH A DAMP SPONGE, WIPE WITH A MICROFIBER CLOTH OR JUST FLUSH WITH CLEAN WATER.CAUTION -- MAKE SURE TO POLISH THE SURFACE WITH MICROFIBER CLOTH AFTER APPLYING NC1, OTHERWISE, YOU MAY DISCOVER SPOTS.

NC1 OUTER SURFACES, HULL, ETC.

IN THIS CASE, NC1 IS USED AS A FOAM. SPRAYED ON THE SURFACE AND AFTER THAT CLEANED BY USING THE CLEANING SYSTEM OF NOBELCLEAN AND THEN WASHED WITH PURE WATER, AND THAT IS IT!

NC1 CAN BE USED IN THE SUN BUT AFTER USAGE, SURFACES SHOULD BE WASHED ORPOLISHED IMMEDIATELY WITH A MICROFIBER CLOTH.

MIRRORS, WINDOWS

NC1 MAY AS WELL BE VERY WELL APPLIED TO THE INTERIOR, GLASS AND MIRROR SURFACES.JUST SPRAY AMOUNT AND SIMPLY WIPE THE DIRT WITH A MICROFIBER CLOTH AND POLISH WITH THE SECOND TOWEL AND IT IS READY! EVEN LIFTS OR VARIOUS OTHER SURFACES CAN BE CLEANED AS WELL.

NC1 CANNOT BE USED FOR UPHOLSTERY, LEATHER OR CARPETS!

NC 1 FOR WORK DESKS

NC 1 WORKS GREAT ON THE WORKSPACES OF THE BOAT. WITH A SMALL PUMP YOU CAN SPRAY AMOUNT AND AFTERWARDS JUST WIPE THE DUST IN ONE DIRECTION WITH ONE OF THE TOWELS AND POLISH WITH THE OTHER TOWEL AND VOILA!

NC 1 IN THE ENGINE COMPARTMENT

NC1 CLEANS AND GIVES A GREAT GLOW ON PRODUCTS OF STAINLESS STEEL. AND AGAIN IT ISAS SIMPLE AS THAT, SPRAY, WIPE OFF THE DUST AND POLISH WITH THE SECOND TOWEL AND IT SHINES AMAZING!

GENERAL INFORMATION FOR NC1

NC1 MAY BE USED ON ALL LACQUERED SURFACES AS WELL AS ON THOSE OF GLASS STAINLESS STEEL, MIRROR OR OTHER GLOSSY SURFACES.

PLEASE AFTER USING NC1 IN DIRECT SUNLIGHT MAKE SURE TO IMMEDIATELY POLISH THE SURFACE OR SPOTS CAN OCCURRE.

PLEASE NOTE THAT WHILE USING NC1 ON ALL INTERIOR SURFACES, YOU MUST USE ONLY WITH THE SHOWED SPECIAL MICROFIBER TOWEL WITH THE SMALL SQUARES.