NAUTILUS PROJECTS AND DESIGN | TURNKEY ......NAUTILUS PROJECTS AND DESIGN | TURNKEY PROJECT...

NAUTILUS PROJECTS AND DESIGN | TURNKEY PROJECT SOLUTIONS page 1


INTRODUCTIONNAUTILUS PROJECTS & DESIGN is a division of GIZA TECNOLOGIES, which was founded by Daniel Tenner in May 2002 and traded as GIZA TECHNOLOGIES before becoming the holding company for NAUTILUS PROJECTS & DESIGN in 2010.

NAUTILUS PROJECTS & DESIGN offers Engineering Turnkey Project Solutions and provides solutions in design, development, manufacture, installation and project management for a wide variety of industries and applications.

Rapid turnaround time, reasonable rates and exceptional quality are GUARANTEED.

NAUTILUS PROJECTS & DESIGN enables our customers to walk away from the project with the confidence that it will be completed in a timely and cost effective manner.

Total customer satisfaction is ensured by the use of the latest available technology.

GIZA TECHNOLOGIES (PTY) Ltd.

Some of the various divisions within the Giza Group are:

• Nautilus Projects and Design – Structural, Mechanical, Electrical, Civil and Projects Engineering

• Giza International Employment Solutions – Recruitment & Labour Outsourcing.

• ChemChamp Africa – Solvent Recycling

• Clean Planet Chemicals Africa – Chemical & Solvent Recycling

• Goldwagen Grahamstown. – Automotive Retail

NAUTILUS PROJECTS & DESIGN | TURNKEY PROJECT SOLUTIONS

COMPANY PHYLOSOPHY• NAUTILUS PROJECTS & DESIGN currently employs 50 people and complies with all current legislation including the

Basic Conditions of Employment Act, Skills Development Act and Promotion of Access to Information Act amongst others.

• NAUTILUS PROJECTS & DESIGN is committed to the belief that Safety takes precedent over all other considerations and as such will not be compromised for expediency or profit.

• NAUTILUS PROJECTS & DESIGN is committed to the process of developing the skills of all of our workforce and recognize that we have a responsibility to ensure the well being of all staff.

• NAUTILUS PROJECTS & DESIGN is committed to the belief that our people are our strongest asset.

• NAUTILUS PROJECTS & DESIGN is committed to investment in training, plant & equipment and IT software necessary to ensure that we remain competitive and abreast of the latest technologies.

• NAUTILUS PROJECTS & DESIGN is committed to continuing our efforts to broaden our customer base and to supply the high quality of service on which we have built the company’s reputation.

• NAUTILUS PROJECTS & DESIGN is committed to quality excellence and all work is performed to ISO quality standards

for which they are in the process of achieving certification

• GIZA TECHNOLOGIES also offers Apprenticeships and Engineering Internships and we further facilitate in house training for Semi Skilled Staff.



TYPICAL TURNKEY SERVICESNAUTILUS PROJECTS & DESIGN offers the following services:

• Turnkey Engineering Solutions

• Project Management

• Mechanical, Electrical and Instrument Engineering;

• Structural, Mechanical , Plant and Electrical Designs of the Following:-

• Bulk material conveying and handling systems

• Mineral processing plant (including OEM supply)

• FMCG processing plant (including OEM supply)

• HDPE, lined steel, carbon steel and stainless steel piping & pumps

• Hydraulic and pneumatic power and control systems

• Tanks for bulk storage and material processing


http://www.toreuse.com/wp-content/uploads/2011/07/aluminum-storage-tanks.jpg

http://www.toreuse.com/wp-content/uploads/2011/07/aluminum-storage-tanks.jpg


DESIGN SERVICES


DESIGN FACILITIESAll 3D designs involving structural, mechanical and pipe routing are done on up-to-date Autodesk Inventor software. Your product is designed and developed into a working 3D model right down to the bolts and nuts thereby eliminating reworks and modifications done on the floor due to clashes and design errors. AutoCAD 2D is used for conceptual work and civil designs while Inventor drawings are converted to AutoCAD for ease of sharing and quick modifications in the concept stage. Inventor is able to open and convert models from various software packages and translators.

DESIGN SERVICES AND PROCEDURES• Conceptual / Block designs for proposals and initial project specifications are represented in 3D and 2D drawings.• Engineering designs and calculations for equipment specification and structural member selection.• Conceptual 3D design with selected equipment for design review and approval.• Civil layout design on finalisation of equipment position and transfer points.• Final design layout and 3D model for design review and acceptance• Civil designs and bending schedules for issue to client for civil works.• Detail designs and manufacturing drawings .• Laser templates for plate procurement

• As-built designs to be concluded on commissioning of plant


E & I SERVICESNAUTILUS PROJECTS & DESIGN offers Commercial and Industrial Electrical Engineering including:

• Design & manufacturing of distribution panels and mini sub-stations

• Plant, Factory & Industrial electrical reticulation and installation

• Installation and upgrading of transformers

• Supply and installation of pumps and motors

• Supply and installation of generators

• HV and LV reticulation

• Lightning Protection

• Robotics

• Maintenance and Servicing



AUTOMATION SERVICES NAUTILUS PROJECTS & DESIGN also provides Process

Control Engineering including:

• PLC system integration

• SCADA and HMI (Human-Machine Interface)

• Software development

• Production monitoring systems

• Ergonomic studies

• Assembly simulation


http://processengineering.theengineer.co.uk/attachment?storycode=1016661&attype=P&atcode=2042568

http://processengineering.theengineer.co.uk/attachment?storycode=1016661&attype=P&atcode=2042568


MAINTENANCE SERVICES

NAUTILUS PROJECTS & DESIGN also provides:

• Design and implementation of preventive maintenance systems

• Management of scheduled & planned maintenance.

• Computerised data management and recording systems.

• Plant assessments and Maintenance Package proposals.

• Operation and Maintenance of mines, factories, processing plants.

• Shutdown maintenance services for any industry.


NAUTILUS PROJECTS & DESIGN has a long history of working

closely with clients during the design and installation phases of

new plant projects and during the early stages of expansion and

optimisation projects.

NAUTILUS PROJECTS & DESIGN has a team of highly skilled

engineers with extensive maintenance experience who are able

to identify opportunities for minimising maintenance downtime

and reduce maintenance equipment costs such as scaffolding,

cranage, etc., and reduce overall Health, Safety and

Environmental risks.


SAFETY,HEALTH,ENVIROMENT & QUALITY


HEALTH AND SAFETY

NAUTILUS PROJECTS & DESIGN always makes sure that their workshops operate within current health and safety standards and are committed to the belief that SAFETY takes precedent over all other considerations and as such will not be compromised for expediency or profit.

COMPANY HEALTH AND SAFETY POLICY OSH Act sec.7All work activities are in full compliance with the Occupational Health and Safety Act.

The safety of all persons that may be affected by any work activities.

Good Labor practice is applied in all works.

Health & Safety management shall be at a high standard at all times.

No person shall be allowed to deviate from H&S regulations.

The health, safety and welfare of persons affected by our work remains our highest priority.

None of the work activities affect the environment in a negative manner.

Risk assessments are conducted and all persons are informed and understand the risk involved.

Continuous improvement shall be our main objective in H&S.

H&S policy shall be reviewed annually to ensure that it remains applicable and relevant.

Records shall be kept of all incidents, accidents and near misses and of the investigations conducted.


SAFETY,HEALTH,ENVIROMENT & QUALITY


ENVIROMENT & QUALITY

NAUTILUS PROJECTS & DESIGN is committed to quality excellence and all work is performed to ISO quality standards for which they are in the process of achieving certification and will be audited early in the new year. We are dedicated to the environment and promote the recycling of products as seen in our solvent recycling.

The purpose of ISO standards help us to control the efficiency of services our company can deliver to the client. It effects the control of our purchasing to the end product we deliver to the client therefore guaranteeing that we deliver the best possible end result to you timeously and cost effectively.


PROJECT LIFE CYCLE

New Project inquiry

Feasibility Study

Engineering

Procurement

Construction

Commissioning

Operation

Project

Optimization

Pre Investment Phase

Investment Phase

Return on Investment



SUCCESSFUL PROJECT DESIGN• Customer: Parmalat

• Projects: Various Process Conveyors , Bulk Storage Tanks & Milk Receiving Area

• Scope of work: Plant Design



SUCCESSFUL PROJECTS • Customer: Sovereign Foods

• Projects: Various Stainless Steel Processing Plant, Piping & Conveyors

• Scope of Work: Design, Manufacture, Installation & Commissioning



SUCCESSFUL PROJECTS • Customer: VWSA

• Projects: Bonnet Hinge Assembly Jig, Robot Door Gripper

• Scope of Work: Design, Manufacture & Install



SUCCESSFUL PROJECTS • Customer: VWSA

• Projects: Stainless Steel Boot Solvent Scrub and Dry System

• Scope of Work: Design, Manufacture & Install



SUCCESSFUL PROJECTS• Customer: Toyota SA – Durban

• Project: Paint Mix System, Room, Paint lines and Heat-Exchangers.

• Scope of work: Manufacture, Installation and Commissioning




• Project: Paint Mix System, Room, Paint lines and Heat-Exchangers.





• Project: Solvent Recovery Systems




SUCCESSFUL PROJECTS• Customer: GM SA – PE

• Project: Water Test Facility Pipe System & Industrial Humidifier




SUCCESSFUL PROJECTS• Customer: GM SA – Port Elizabeth

• Project: Solvent Recovery and Recirculation System

• Scope of work: Design Manufacture, Installation and Commissioning



SUCCESSFUL PROJECTS • Customer: Dynamic Commodities

• Projects: Lye Peel & Rinse System, Cutting & Sorting Conveyors and Process Equipment.

• Scope of work: Design, Manufacture, Installation and Commissioning of Various Process Systems.



SUCCESSFUL PROJECTS• Customer: Delphi – OMG - Umicore

• Project: Slurry Tanks, Leister Ovens and Various S/Steel Products.

• Scope of work: Design, Manufacture, Installation and Commissioning



• Customer: Delphi – OMG - Umicore

• Projects: Scrubber Systems, Stacks and Various Plant & Equipment.



SUCCESSFUL PROJECTS


• Customer: Shatterproof

• Project: Various Equipment over 10 Years



SUCCESSFUL PROJECTS


• Customer: Basil Read – Mopani Gold Mining - Botswana

• Project: Plant Maintenance Structural Workshop

• Scope of work: Designed, Manufactured & Installed, with all Logistics.


SUCCESSFUL PROJECTS


• Customer: Sea Ark

• Project: Prawn Farm Turnkey Project, Water Quality & Reuse Systems, Design and Infrastructure Implementation.

• Scope of work : Design, Manufacture, Installation and Commissioning


SUCCESSFUL PROJECTS


• Customer: B & G Mari-culture

• Project: Oyster Hatchery

• Scope of work : Design, Manufacture, Installation and Commissioning


SUCCESSFUL PROJECTS

http://1.bp.blogspot.com/-hcHFeu_G8jg/UGSJRUTocBI/AAAAAAAAADg/rsvCiXb0kcM/s1600/024.JPG

http://1.bp.blogspot.com/-hcHFeu_G8jg/UGSJRUTocBI/AAAAAAAAADg/rsvCiXb0kcM/s1600/024.JPG


SUCCESSFUL PROJECTS • Customer: Parmalat

• Project: Various Plant, Process Systems and Equipment.



NAUTILUS PROJECTS AND DESIGN | TURNKEY PROJECT SOLUTIONS page 29NAUTILUS PROJECTS & DESIGN | TURNKEY PROJECT SOLUTIONS

• Customer: Baldmin Projects

• Project: Mazowe Gold Processing and Piping

• Scope of work: Design, Manufacture and Installation

SUCCESSFUL PROJECTS

NAUTILUS PROJECTS AND DESIGN | TURNKEY PROJECT SOLUTIONS page 30NAUTILUS PROJECTS & DESIGN | TURNKEY PROJECT SOLUTIONS

• Customer: African Minerals Limited

• Project: 1D 2 Dry Plant/Iron Ore


SUCCESSFUL PROJECTS


SUCCESSFUL PROJECTS


• Customer: AMC– UMK

• Project: A32 - Manganese Process Plant



SUCCESSFUL PROJECTS• Customer: African Minerals Limited

• Project: 1D 2 Wet Plant/Iron Ore




SUCCESSFUL PROJECTS• Customer: African Minerals Limited

• Project: Iron Ore Facilities 1G dry plant




BEE CERTIFICATE



NAUTILUS PROJECTS & DESIGN SAFETY AND QUALITY


GIZA REGISTRATION & TAX CLEARANCE CERTIFICATE


ENTERPRISE AND SOCIAL DEVELOPMENT


Daniel Tenner – Managing DirectorTel: +27 (0)41 367 3083Cell: +27 (0)82 589 9018E-mail: [email protected]

CONTACTS

NAUTILUS PROJETS & DESIGN

Head Office 10 Springfield Road, Springfield, Port Elizabeth, 6070, South AfricaTel: +27 (0)41 367 3083Email: [email protected]

Postal Address, PO Box 5377, Walmer, Port Elizabeth, 6065,South Africa


Mechanical Workshop

47 Stanford Road, Korsten, Port Elizabeth, 6001, South Africa

mailto:[email protected]


THANK YOU


NAUTILUS PROJECTS & DESIGNS would like to take this opportunity of thanking you for taking the

trouble to read the above portfolio and company profile.

Should you require any additional information or references please do not hesitate to contact any of the

management team who will be more than willing to assist you.

We look forward to hearing from you and hope that we can be of service to you in the future.

NAUTILUS PROJECTS AND DESIGN | TURNKEY ......NAUTILUS PROJECTS AND DESIGN | TURNKEY PROJECT...

Documents

Transcript of NAUTILUS PROJECTS AND DESIGN | TURNKEY ......NAUTILUS PROJECTS AND DESIGN | TURNKEY PROJECT...