Nautic Steels Catalogue 2014b (1)

1

Nautic Steels Ltd.(A member of Pantech Group Holdings Berhad, Listed on Main Board of Bursa Malaysia)

Nautic House, ClaymoreTame Valley Industrial Estate

TamworthStaffordshire

B77 5DQUnited Kingdom

Tel: +44 (0)1827 281111Fax: +44 (0)1827 281444

Email: [email protected]

www.nautic.co.uk

Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel

3Company Background

Product Categories

Quality Management System

EEMUA EEMUA 144

- Section 1- Section 2

EEMUA 145- Section 1A- Section 1B- Section 2A- Section 2B- Section 3- Section 4

EEMUA 146- Section 1- Section 2- Section 3- Section 5- Section 6- Section 7

ASME / BS / MSS SP-43 ASME B16.11 ASME B16.48 ASME B16.5 ASME B16.9 BS 3799 MSS SP-43

Reference

01

05

09

13151617

19202223232426

2930 37

4547

49525456687577

79

Table of Contents

Company Background

1

Nautic Steels Ltd, established in 1978 with current factory size of more than 100,000sq ft is strategically located in Tamworth, Staffordshire, the industrial heart of the United Kingdom.

Nautic Steels is an ISO 9001:2008 certified Company and is one of the worlds leading manufacturers of pipes, fittings, flanges and ancillary equipment with material grades of Nickel Alloys, Copper Nickel 90/10 and 70/30, Austenitic Stainless Steels, 6Mo, Duplex and Super Duplex. Our products are widely used in Oil and Gas, Onshore, Offshore, Chemical and Petrochemical, Marine and Shipbuidlings, Defence industries and Seawater Systems including Fire Water, Desalination and Water Cooling Plants.

With more than 35 years of experience, Nautic Steels is fully committed to our philosophy of producing high quality products, prompt delivery and continuous improvement to fulfil our customers needs.

Beside our excellent manufacturing capability, extensive knowledge and experience, we are also constantly improving and expanding our product by investing in the research and development (R&D) in order to be relevant to the industrys demand.

Our products are well accepted in the major Oil and Gas, Marine & Shipyard companies such as Adma, Aramco, Norsok M-650, Petronas, Petrobas, Qatar Petroleum, Zadco and others.

COMPANY BACKGROUND

Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel

INDUSTRY APPLICATION FOR NICKEL ALLOYS AND COPPER NICKELNickel alloys have excellent resistance to corrosion and high temperature applications.

Copper nickel has resistance to corrosion, especially for seawater that requires superior resistance to impingement corrosion attack.

Application for: Bilge and Ballast Systems

Cargo Heating Coils

Chemical Tanker Buildings

Fire Fighting Systems

Hydraulic and Pneumatic Systems

Insert-Gas Systems

Onshores

Offshores

Petrochemical & Chemical Processing

Power Generation

Power Station Condensers

Pulp & Paper

Sanitory Systems

Seawater Cooling Systems

Seawater Desalination Plants

Shipboard Sea Water Systems

Ship-building

Splash Zone Sheathing

Waste Water Treatment Water Instakes

2

Nautic Steels Ltd, established in 1978 with current factory size of more than 100,000sq ft is strategically located in Tamworth, Staffordshire, the industrial heart of the United Kingdom.

Nautic Steels is an ISO 9001:2008 certified Company and is one of the worlds leading manufacturers of pipes, fittings, flanges and ancillary equipment with material grades of Nickel Alloys, Copper Nickel 90/10 and 70/30, Austenitic Stainless Steels, 6Mo, Duplex and Super Duplex. Our products are widely used in Oil and Gas, Onshore, Offshore, Chemical and Petrochemical, Marine and Shipbuidlings, Defence industries and SeawaterSystems including Fire Water, Desalination and Water Cooling Plants.

With more than 35 years of experience, Nautic Steels is fully committed to our philosophy of producing high quality products, prompt delivery and continuous improvement to fulfil our customers needs.

Beside our excellent manufacturing capability, extensive knowledge and experience, we are also constantly improving and expanding our product by investing in the research and development (R&D) in order to be relevant to the industrys demand.

Our products are well accepted in the major Oil and Gas, Marine & Shipyard companies such as Adma, Aramco, Norsok M-650, Petronas, Petrobas, Qatar Petroleum, Zadco and others.

COMPANY BACKGROUND


INDUSTRY APPLICATION FOR NICKEL ALLOYS AND COPPER NICKELNickel alloys have excellent resistance to corrosion and high temperature applications.

Copper nickel has resistance to corrosion, especially for seawater that requires superior resistance to impingement corrosion attack.

Application for: Bilge and Ballast Systems

Cargo Heating Coils

Chemical Tanker Buildings

Fire Fighting Systems

Hydraulic and Pneumatic Systems

Insert-Gas Systems

Onshores

Offshores

Petrochemical & Chemical Processing

Power Generation

Power Station Condensers

Pulp & Paper

Sanitory Systems

Seawater Cooling Systems

Seawater Desalination Plants

Shipboard Sea Water Systems

Ship-building

Splash Zone Sheathing

Waste Water Treatment Water Instakes

3

Product Categories

5

We manufacture and stock a comprehensive of product range in Nickel Alloys, Duplex, Super Duplex, Austenitic Stainless Steels, Copper Nickel 90/10 and 70/30 and 6Mo.

PRODUCT CATEGORIES


All products are manufactured in accordance to standards and specifications.

Pipes/TubesSeamless (1/2" to 16") and welded pipes/tubes (8" to 36") with wall thicknesses ranging from 2mm to 19mm.

Butt-welded and forged fittings in sizes ranging from 1/2" up to 36" with wall thicknesses ranging from 5s to XXS.Fittings

FlangesFlanges in sizes ranging from 1/2" up to 36" with wall thicknesses ranging from 5s to XXS. Classes vary from 150 up to 2500 lb.

OthersOlets, nipples, capillary, compression, socket weld.

Forged Fittings Flanges SpecialFlanges Olets Nipples

Capillary Brazed Composite BlindComposite

Blind Spades ElboletsSwage Nipples

(Concentric/Eccentric)

Socket Weld Composite Weld Neck CompositeSpectacle Blinds

Latrolets Pipe Nipples

Screwed Composite Slip-on Nipoflanges Threadolets

Compression Solid BlindSpades and

Ring Spacers Nipolets

Solid Weld-Neck Spectacle Blinds Sockolets

Solid Slip on Weldolets

Socket Weld Weldoflanges

Stub End

Threaded

NIPPLESFORGING FITTINGS, FLANGES, OLETS

Pipes/Tubes Butt- Welded Fittings

Tees

Reducers(Concentric/Eccentric)

Seamless and Welded Elbows

End Caps

Saddles

PIPES BUTT-WELDED FITTINGS

PRODUCT RANGE

Alloys UNS

NICKELALLOYS

Alloy 200/201 N02200/N02201

Alloy 400 N04400

Alloy 600 N06600

Alloy 601 N06601

Alloy 625 N06625

Alloy 800 N08800

Alloy 801 N08801

Alloy 800H N08810

Alloy 800HT N08811

Alloy 825 N08825

Alloy C22 N06022

Alloy C276 N10276

Alloys UNS

DUPLEX &SUPER

DUPLEX

Alloys UNSAUSTENITIC STAINLESS

STEELS

Alloys UNS

COPPERNICKEL(Cu-Ni)

Duplex 2205 S31803

Duplex 2205 S32205

Super Duplex 2507 S32750

Super Duplex S32760

6Mo S31254

904L N08904

90/10 Cu-Ni C70600

90/10 Cu-Ni C70620

EEMUA 7060X UNS 7060X

70/30 Cu-Ni C71500

TYPES OF MATERIAL

6

We manufacture and stock a comprehensive of product range in Nickel Alloys, Duplex, Super Duplex, Austenitic Stainless Steels, Copper Nickel 90/10 and 70/30 and 6Mo.

PRODUCT CATEGORIES


All products are manufactured in accordance to standards and specifications.

Pipes/TubesSeamless (1/2" to 16") and welded pipes/tubes (8" to 36") with wall thicknesses ranging from 2mm to 19mm.

Butt-welded and forged fittings in sizes ranging from 1/2" up to 36" with wall thicknesses ranging from 5s to XXS.Fittings

FlangesFlanges in sizes ranging from 1/2" up to 36" with wall thicknesses ranging from 5s to XXS. Classes vary from 150 up to 2500 lb.

OthersOlets, nipples, capillary, compression, socket weld.

Forged Fittings Flanges SpecialFlanges Olets Nipples

Capillary Brazed Composite BlindComposite

Blind Spades ElboletsSwage Nipples

(Concentric/Eccentric)

Socket Weld Composite Weld Neck CompositeSpectacle Blinds

Latrolets Pipe Nipples

Screwed Composite Slip-on Nipoflanges Threadolets

Compression Solid BlindSpades and

Ring Spacers Nipolets

Solid Weld-Neck Spectacle Blinds Sockolets

Solid Slip on Weldolets

Socket Weld Weldoflanges

Stub End

Threaded

NIPPLESFORGING FITTINGS, FLANGES, OLETS

Pipes/Tubes Butt- Welded Fittings

Tees

Reducers(Concentric/Eccentric)

Seamless and Welded Elbows

End Caps

Saddles

PIPES BUTT-WELDED FITTINGS

PRODUCT RANGE

Alloys UNS

NICKELALLOYS

Alloy 200/201 N02200/N02201

Alloy 400 N04400

Alloy 600 N06600

Alloy 601 N06601

Alloy 625 N06625

Alloy 800 N08800

Alloy 801 N08801

Alloy 800H N08810

Alloy 800HT N08811

Alloy 825 N08825

Alloy C22 N06022

Alloy C276 N10276

Alloys UNS

DUPLEX &SUPER

DUPLEX

Alloys UNSAUSTENITIC STAINLESS

STEELS

Alloys UNS

COPPERNICKEL(Cu-Ni)

Duplex 2205 S31803

Duplex 2205 S32205

Super Duplex 2507 S32750

Super Duplex S32760

6Mo S31254

904L N08904

90/10 Cu-Ni C70600

90/10 Cu-Ni C70620

EEMUA 7060X UNS 7060X

70/30 Cu-Ni C71500

TYPES OF MATERIAL

7

Quality Management System

9

Nautic Steels is committed to achieve high quality through state-of-art technology and equipment, and also certified to ISO 9001:2008 quality management a high quality of products that are in accordance to national and international standards and specifications.

QUALITY MANAGEMENT SYSTEM


WELDING PROCEDURES AND SPECIFICATIONSAll welds are 100% radiograpically inspected to ASME code, Section VIII UW51.

All procedures are qualified to ASME IX, generally Lloyd's Register EMEA approval, giving a comprehensive range of materials.

All personnel engaged in welding are qualified to ASME IX, these are checked and approved when required. Welding processs used are T.I.G and M.M.A

TYPE OF TESTINGS

Destructive Testing

ASTM G48 Method C

ASTM G28 Method B

ASTM A262 Practice E Corrosion Test

Ferrite Determination to ASTM E562

Hardness Testing

Tensile Testing to Applicable Specification

Charpy Impact Testing

Metallography

ASTM G48 Method A

Non Destructive Testing

Liquid Dye Penetrant Testing (DPI)

Product Material Identification (PMI) - Niton XL2980 Goldd Alloy Analyzer

Ultrasonic Testing (UT)

Fischer Ferrite Testing

Radiography

NAUTIC IS ALSO NORSOK M-650 APPROVED FOR THE FOLLOWING:

Size Type Category ForUNS

S31254UNS

S31803UNS

S32760

6MoDuplex2205

Duplex & Super Duplex

AusteniticStainless Steel

Super DuplexS32760

Stub End Flanges

Stub End Flanges

Elbows, Tees, Reducers

Elbows, Tees, Reducers and End Caps

FlangesWelded6" to 24"

3/4" to 6"

6" to 24"

3/4" to 6"

Seamless

Welded

Seamless

Flanges

Fittings

Fittings

10

Nautic Steels is committed to achieve high quality through state-of-art technology and equipment, and also certified to ISO 9001:2008 quality management a high quality of products that are in accordance to national and international standards and specifications.

QUALITY MANAGEMENT SYSTEM


WELDING PROCEDURES AND SPECIFICATIONSAll welds are 100% radiograpically inspected to ASME code, Section VIII UW51.

All procedures are qualified to ASME IX, generally Lloyd's Register EMEA approval, giving a comprehensive range of materials.

All personnel engaged in welding are qualified to ASME IX, these are checked and approved when required. Welding processs used are T.I.G and M.M.A

TYPE OF TESTINGS

Destructive Testing

ASTM G48 Method C

ASTM G28 Method B

ASTM A262 Practice E Corrosion Test

Ferrite Determination to ASTM E562

Hardness Testing

Tensile Testing to Applicable Specification

Charpy Impact Testing

Metallography

ASTM G48 Method A

Non Destructive Testing

Liquid Dye Penetrant Testing (DPI)

Product Material Identification (PMI) - Niton XL2 980 Goldd Alloy Analyzer

Ultrasonic Testing (UT)

Fischer Ferrite Testing

Radiography

NAUTIC IS ALSO NORSOK M-650 APPROVED FOR THE FOLLOWING:

Size Type Category ForUNS

S31254UNS

S31803UNS

S32760

6MoDuplex2205

Duplex & Super Duplex

AusteniticStainless Steel

Super DuplexS32760

Stub End Flanges

Stub End Flanges

Elbows, Tees, Reducers

Elbows, Tees, Reducers and End Caps

FlangesWelded6" to 24"

3/4" to 6"

6" to 24"

3/4" to 6"

Seamless

Welded

Seamless

Flanges

Fittings

Fittings

11

EEMUA

13

EEM

UA 14

4

Sec

tion

1

Sec

tion

2

15

Nominal

Size

Specified

mm

9.5 3 100.62 119.10

11.0 3 118.90 153.10

13.0 3 176.30 217.30

15.0 2 234.90 292.21

17.0 2 302.20 378.76

19.0 2 390.00 475.97

9.0 3 80.75 103.32

8.0 3 65.80 80.64

mm

16 bar

mm

20 bar

mm

16 bar

kg

20 bar

kg

Specified WallThickness

TheoreticalWeight/Metre

6.5

7.0

8.0

8.5

10.5

12.0

13.5

15.5

368

419

457.2

508

610

711

813

914

14

16

18

20

24

28

32

36

ApproxLengthMTR.

Seam-welded 90/10 Cu Ni to EEMUA Publication No: 144: Section 2. Condition O annealed.

Pipe

Inspection of Welds100% radiographic inspection to ASME code, Section VIII, UW51.

** For 16 and 20 bar systems the 76. 1mm pipe and component size is now referred to as 21/2" nominal andto 88.9mm pipe and component size is referred to as 3" nominal. This is to bring the designations of theses two sizes into line with national and international practice. The pipe sizes stated are toleranced on the ID as per EEMUA 146 at the welding ends, to match the bores of components. Pipes are normally supplied with plain ends.

I Seam-Welded Pipe

Seam-Welded PipeSeamless Pipe

mm mm

Nominal

Size

Specified

mm

1/23/4

1 1/41 1/2

2 1/2 **

1 2.5 6 6 1.93 1.9330

2.5 6 6 2.49 2.4938

2.5 6 6 2.94 2.9444.5

2 2.5 6 6 3.82 3.8257

2.5 5/6 5/6 5.15 5.1576.1

3** 2.5 5/6 5/6 6.05 6.0588.9

4 3.0 5/6 5/6 8.82 8.82108

6 3.5 5/6 5/6 13.10 15.24159

8 4.5 5/6 4/5.5 24.10 27.04219.1

10 5.5 5/6 4/5 33.10 40.27267

12 7.0 5/6 4/5 49.05 62.10323.9

2.0 6 6 1.29 1.2925

2.0 6 6 0.78 0.7816

14 8.0 4/5.5 3/4.5 65.80 80.64368

16 9.0 3/5.5 3 80.75 103.32419

mm

16 bar

mm

20 bar

mm16 bar 20 bar

16 bar

kg

20 bar

kg

2.5

2.5

2.5

2.5

2.5

2.5

3.0

3.0

4.0

4.5

5.5

2.0

2.0

6.5

7.0


Approx LengthMTR.


Seamless 90/10 Cu Ni to EEMUA Publication No: 144: Section 1.

Pipe

Outside Diameter (OD)Tube Sizes 1/2"/16mm to 4"/108mm* conform EEMUA Publication No 144: Section 1.

Inside Diameter (ID)Tube sizes 6"/159mm to 36"/914mm conform to EEMUA Publication No: 144 Section 1.

Wall ThicknesssWall thicknesses conform to EEMUA offshore requirements for 16 and 20 bar systems. For 16mm to 108mm sizes, additional wall thickness allowances have been made to increase the robustness to withstand mechanical damage.

I Seamless Pipe

EEMUA 144 - Section 1 EEMUA 144 - Section 2

OD

ID

T

Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel16

Nominal

Size

Specified

mm

9.5 3 100.62 119.10

11.0 3 118.90 153.10

13.0 3 176.30 217.30

15.0 2 234.90 292.21

17.0 2 302.20 378.76

19.0 2 390.00 475.97

9.0 3 80.75 103.32

8.0 3 65.80 80.64

mm

16 bar

mm

20 bar

mm

16 bar

kg

20 bar

kg



6.5

7.0

8.0

8.5

10.5

12.0

13.5

15.5

368

419

457.2

508

610

711

813

914

14

16

18

20

24

28

32

36

ApproxLengthMTR.

Seam-welded 90/10 Cu Ni to EEMUA Publication No: 144: Section 2. Condition O annealed.

Pipe

Inspection of Welds100% radiographic inspection to ASME code, Section VIII, UW51.

** For 16 and 20 bar systems the 76. 1mm pipe and component size is now referred to as 21/2" nominal and to 88.9mm pipe and component size is referred to as 3" nominal. This is to bring the designations of theses two sizes into line with national and international practice. The pipe sizes stated are toleranced on the ID as per EEMUA 146 at the welding ends, to match the bores of components. Pipes are normally supplied with plain ends.

I Seam-Welded Pipe

Seam-Welded PipeSeamless Pipe

mm mm

Nominal

Size

Specified

mm

1/23/4

1 1/41 1/2

2 1/2 **

1 2.5 6 6 1.93 1.9330

2.5 6 6 2.49 2.4938

2.5 6 6 2.94 2.9444.5

2 2.5 6 6 3.82 3.8257

2.5 5/6 5/6 5.15 5.1576.1

3** 2.5 5/6 5/6 6.05 6.0588.9

4 3.0 5/6 5/6 8.82 8.82108

6 3.5 5/6 5/6 13.10 15.24159

8 4.5 5/6 4/5.5 24.10 27.04219.1

10 5.5 5/6 4/5 33.10 40.27267

12 7.0 5/6 4/5 49.05 62.10323.9

2.0 6 6 1.29 1.2925

2.0 6 6 0.78 0.7816

14 8.0 4/5.5 3/4.5 65.80 80.64368

16 9.0 3/5.5 3 80.75 103.32419

mm

16 bar

mm

20 bar

mm16 bar 20 bar

16 bar

kg

20 bar

kg

2.5

2.5

2.5

2.5

2.5

2.5

3.0

3.0

4.0

4.5

5.5

2.0

2.0

6.5

7.0


Approx LengthMTR.


Seamless 90/10 Cu Ni to EEMUA Publication No: 144: Section 1.

Pipe

Outside Diameter (OD)Tube Sizes 1/2"/16mm to 4"/108mm* conform EEMUA Publication No 144: Section 1.

Inside Diameter (ID)Tube sizes 6"/159mm to 36"/914mm conform to EEMUA Publication No: 144 Section 1.

Wall ThicknesssWall thicknesses conform to EEMUA offshore requirements for 16 and 20 bar systems. For 16mm to 108mm sizes, additional wall thickness allowances have been made to increase the robustness to withstand mechanical damage.

I Seamless Pipe


OD

ID

T

Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel 17

EEM

UA 14

5

Sec

tion

1A

Sec

tion

1B

Sec

tion

2A

Sec

tion

2B

Sec

tion

3

Sec

tion

4

19

EEMUA 145 - Section 1A EEMUA 145 - Section 1A

Size

in

1/23/4

1 1/41 1/2

2 1/2

1 30 60 32 25.00 40 51 5 4 3 15 2.5 3.530

38 70 40 33.03 40 51 5 4 3 15 2.5 3.538

44.5 80 46.5 39.53 45 51 6 4 3 15 2.5 3.544.5

572 99 59 52.16 45 64 6 5 3 15 2.5 3.557

76.1 120 78 71.23 45 64 6 5 3 15 2.5 3.576.1

88.93 130 91 84.08 50 64 7 5 3 15 2.5 3.588.9

1084 158 110 102.13 50 76 7 5 3 15 3.0 4.0108

1596 212 161.5 153.00 50 89 9 5 5 15 3.0 4.0159

219.18 270 222 211.10 50 102 9 5 5 15 4.0 5.5219.1

26710 320 270 257.97 50 127 9 5 5 15 4.5 6.0267

323.912 370 327 312.83 50 152 11 7 5 16 5.5 7.0323.9

25 50 27 21.00 40 51 5 3 3 15 2.0 3.025

16 40 18 12.00 35 51 4 2 3 15 2.0 3.016

14 368 430 371 354.22 50 152 11 7 5 16 6.5 8.0368

16 419 482 422 404.17 50 152 12 7 7 16 7.0 8.5419

18 457.2 530 460 441.5 50 152 12 7 7 16 8.0 9.5457.2

20 508 585 511 490.5 50 152 12 7 7 20 8.5 10.0508

24 610 685 613 589.5 60 152 14 9 7 20 10.5 12.0610

28 711 800 719 687.5 60 190 19 9 7 24 12.0 14.5711

32 813 905 821 786.5 60 190 20.5 9 7 24 13.5 16.0813

36 914 1000 922 883.5 60 190 22 9 7 32 15.5 17.5914

mm

d3

mm

d4

mm

d6

mm

d7

mm

h2

mm

Type Sh1

mm

Type Lh1

mm

r1

mm

r2

mm

h5

mm

S1

mm

S2

mm

RatingClass 150 for 16 bar rated systems at 75C to EEMUA Publication No. 145: Section 1.

DimensionsTo EEMUA Publication No. 145 Section 1.

16 Bar Composite Weld-NeckWrought stub ends for use with forged carbon steel backing flanges shown on page 22.

Stub End FlangesRatingClass 150 for 20 bar at 38C to EEMUA Publication No. 145: Section 1.



Stub End Flanges

Size

in

1/23/4

1 1/41 1/2

2 1/2

1 30 60 32 25.00 40 51 5 4 3 15 2.5 3.530

38 70 40 33.03 40 51 5 4 3 15 2.5 3.538

44.5 80 46.5 39.53 45 51 6 4 3 15 2.5 3.544.5

572 99 59 52.16 45 64 6 5 3 15 2.5 3.557

76.1 120 78 71.23 45 64 6 5 3 15 2.5 3.576.1

88.93 130 91 84.08 50 64 7 5 3 15 2.5 3.588.9

1084 158 110 102.13 50 76 7 5 3 15 3.0 4.0108

1596 212 161.5 152.00 50 89 9 5 5 15 3.5 4.5159

219.18 270 222 210.10 50 102 9 5 5 15 4.5 6.0219.1

26710 320 270 255.93 50 127 9 5 5 15 5.5 7.0267

323.912 370 327 309.74 50 152 11 7 5 16 7.0 8.5323.9

25 50 27 21.00 40 51 5 3 3 15 2.0 3.025

16 40 18 12.00 35 51 4 2 3 15 2.0 3.016

14 368 430 371 351.00 50 152 11 7 5 16 8.0 9.5368

16 419 482 422 399.84 50 152 12 7 7 16 9.0 10.5419

18 457.2 530 460 438.5 50 152 12 7 7 16 9.5 11.0457.2

20 508 585 511 486.5 50 152 12 7 7 20 11.0 12.5508

24 610 685 613 584.5 60 152 14 9 7 20 13.0 14.5610

28 711 800 719 681.5 60 190 19 9 7 24 15.0 19.0711

32 813 905 821 779.5 60 190 20.5 9 7 24 17.0 21.0813

36 914 1000 922 876.5 60 190 22 9 7 32 19.0 23.0914

mm

d3

mm

d4

mm

d6

mm

d7

mm

h2

mm

Type Sh1

mm

Type Lh1

mm

r1

mm

r2

mm

h5

mm

S1

mm

S2

mm

d3

S1

S2

r2

r1

Type S d6d4

d7

h5

h2

SquareCorner

h1

d3

S1

S2

r2

r1

Type L d6d4

d7

h5

h2

SquareCorner

h1

37 2

1.6mm 0.8

d3

S1

S2

r2

r1

Type S d6d4

d7

h5

h2

SquareCorner

h1

d3

S1

S2

r2

r1

Type L d6d4

d7

h5

h2

SquareCorner

h1

37 2

1.6mm 0.8


EEMUA 145 - Section 1A EEMUA 145 - Section 1A

Size

in

1/23/4

1 1/41 1/2

2 1/2

1 30 60 32 25.00 40 51 5 4 3 15 2.5 3.530

38 70 40 33.03 40 51 5 4 3 15 2.5 3.538

44.5 80 46.5 39.53 45 51 6 4 3 15 2.5 3.544.5

572 99 59 52.16 45 64 6 5 3 15 2.5 3.557

76.1 120 78 71.23 45 64 6 5 3 15 2.5 3.576.1

88.93 130 91 84.08 50 64 7 5 3 15 2.5 3.588.9

1084 158 110 102.13 50 76 7 5 3 15 3.0 4.0108

1596 212 161.5 153.00 50 89 9 5 5 15 3.0 4.0159

219.18 270 222 211.10 50 102 9 5 5 15 4.0 5.5219.1

26710 320 270 257.97 50 127 9 5 5 15 4.5 6.0267

323.912 370 327 312.83 50 152 11 7 5 16 5.5 7.0323.9

25 50 27 21.00 40 51 5 3 3 15 2.0 3.025

16 40 18 12.00 35 51 4 2 3 15 2.0 3.016

14 368 430 371 354.22 50 152 11 7 5 16 6.5 8.0368

16 419 482 422 404.17 50 152 12 7 7 16 7.0 8.5419

18 457.2 530 460 441.5 50 152 12 7 7 16 8.0 9.5457.2

20 508 585 511 490.5 50 152 12 7 7 20 8.5 10.0508

24 610 685 613 589.5 60 152 14 9 7 20 10.5 12.0610

28 711 800 719 687.5 60 190 19 9 7 24 12.0 14.5711

32 813 905 821 786.5 60 190 20.5 9 7 24 13.5 16.0813

36 914 1000 922 883.5 60 190 22 9 7 32 15.5 17.5914

mm

d3

mm

d4

mm

d6

mm

d7

mm

h2

mm

Type Sh1

mm

Type Lh1

mm

r1

mm

r2

mm

h5

mm

S1

mm

S2

mm

RatingClass 150 for 16 bar rated systems at 75C to EEMUA Publication No. 145: Section 1.



Stub End FlangesRatingClass 150 for 20 bar at 38C to EEMUA Publication No. 145: Section 1.



Stub End Flanges

Size

in

1/23/4

1 1/41 1/2

2 1/2

1 30 60 32 25.00 40 51 5 4 3 15 2.5 3.530

38 70 40 33.03 40 51 5 4 3 15 2.5 3.538

44.5 80 46.5 39.53 45 51 6 4 3 15 2.5 3.544.5

572 99 59 52.16 45 64 6 5 3 15 2.5 3.557

76.1 120 78 71.23 45 64 6 5 3 15 2.5 3.576.1

88.93 130 91 84.08 50 64 7 5 3 15 2.5 3.588.9

1084 158 110 102.13 50 76 7 5 3 15 3.0 4.0108

1596 212 161.5 152.00 50 89 9 5 5 15 3.5 4.5159

219.18 270 222 210.10 50 102 9 5 5 15 4.5 6.0219.1

26710 320 270 255.93 50 127 9 5 5 15 5.5 7.0267

323.912 370 327 309.74 50 152 11 7 5 16 7.0 8.5323.9

25 50 27 21.00 40 51 5 3 3 15 2.0 3.025

16 40 18 12.00 35 51 4 2 3 15 2.0 3.016

14 368 430 371 351.00 50 152 11 7 5 16 8.0 9.5368

16 419 482 422 399.84 50 152 12 7 7 16 9.0 10.5419

18 457.2 530 460 438.5 50 152 12 7 7 16 9.5 11.0457.2

20 508 585 511 486.5 50 152 12 7 7 20 11.0 12.5508

24 610 685 613 584.5 60 152 14 9 7 20 13.0 14.5610

28 711 800 719 681.5 60 190 19 9 7 24 15.0 19.0711

32 813 905 821 779.5 60 190 20.5 9 7 24 17.0 21.0813

36 914 1000 922 876.5 60 190 22 9 7 32 19.0 23.0914

mm

d3

mm

d4

mm

d6

mm

d7

mm

h2

mm

Type Sh1

mm

Type Lh1

mm

r1

mm

r2

mm

h5

mm

S1

mm

S2

mm

d3

S1

S2

r2

r1

Type S d6d4

d7

h5

h2

SquareCorner

h1

d3

S1

S2

r2

r1

Type L d6d4

d7

h5

h2

SquareCorner

h1

37 2

1.6mm 0.8

d3

S1

S2

r2

r1

Type S d6d4

d7

h5

h2

SquareCorner

h1

d3

S1

S2

r2

r1

Type L d6d4

d7

h5

h2

SquareCorner

h1

37 2

1.6mm 0.8



EEMUA 145 - Section 1B EEMUA 145 - Section 2A & Section 2B

Size d2

in

5/81 30 108 15.9 33 4 3 1.0 1.01.04 1.0479.4145/81 1/4 38 117 15.9 41 4 3 1.2 1.21.2 1.288.9145/81 1/2 44.5 127 15.9 48 4 3 1.5 1.51.5 1.598.4143/4572 152 19.0 62 4 3 2.5 2.52.6 2.6120.6183/42 1/2 76.1 178 19.0 81 4 3 3.3 3.33.4 3.4139.7183/488.93 190 19.0 94 4 3 3.8 3.83.9 3.9152.4193/41084 229 19.0 113 8 3 6.6 6.66.9 6.9190.5247/81596 279 22.2 164 8 4 9.7 9.910.4 10.7241.3277/8219.18 343 22.2 225 8 5 15.0 15.116.7 17.0298.431

26710 406 25.4 273 12 5 23.1 23.526.6 27.5362.038 1

323.912 483 25.4 330 12 7 34.6 35.241.0 43.1431.8141

5/83/4 25 98 15.9 28 4 3 0.8 0.80.8 0.869.814

1/2 5/816 89 15.9 19 4 2 0.64 0.640.66 0.6660.314

1 1/814 368 28.6 374 12 7 44.7 45.553.4 55.8476.2533 45

1 1/816 419 28.6 426 16 7 60.0 60.670.5 72.5539.8597 51

1 1/418 457.2 31.8 465 16 7 66.0 68.078.0 84.3577.8635 52

1 1/420 508 31.8 517 20 7 84.4 86.098.7 103.5635.0698 58

1 3/824 610 34.9 618 20 9 131.4 134149.8 156.5749.3813 71

1 3/828 711 34.9 727 28 9 180.3 183.6- -864.0927 81

1 5/832 813 41.1 829 28 9 269.0 275.5- -978.01060 95

1 5/836 914 41.1 931 32 9 335.8 341.0- -1086.01168 105

mm

Db

MinApprox. Total Weight

incl. Stub End-kg

mm

d5

mm

e

mm S 16 bar L S 20 bar L

No. ofBolt

Holes

K

mmmm mm mm

RatingClass 150 for 16 bar at 75C and 20 bar 38C to EEMUA Publication No. 145: Section 1.

Material CompositionASTM A 105 (normalised) Unless otherwise specified the steel flanges will be supplied galvanised to BS EN ISO 1461. If required the galvanised flanges can be further protected with a Polymide epoxy type paint or chlorinated rubber paint suitable for marine environment.

Backing FlangesForged carbon steel backing flange for use with 90/10 CuNi inner stub end.

Composite Flanges To Suit Stub End

Size d4

in

1 30 30.08 18 108 14536

1 1/4 38 38.10 18 14545

1 1/2 44.5 44.60 19 127

117

14551

572 57.23 19 152 18667

2 1/2 76.1 76.33 19 178 18687

88.93 89.18 21 190 197100

1084 108.38 23 229 247120

3/4 25 25.08 16 98 14531

1/2

5/85/85/83/43/43/43/4

5/8

5/816 16.07 16

60

70

80

99

120

130

158

53

40 89 145

79.4

88.9

98.4

120.6

139.7

152.4

190.5

69.8

60.321

mm

d1

Inner Stub End - Dimensions Outer Steel Flange - Dimensions

d6

Approx.Total

WeightNo. ofBolt

Holesmm

h1

mm

b

mm

K

mm

38

47

53

69

89

103

123

33

23

d5

mm

15.9

15.9

15.9

19.0

19.0

19.0

19.0

15.9

15.9

mm

d2

mm

3

3

3

3

3

3

3

3

3

4

4

4

4

4

4

4

4

4

e

mm

0.92

1.10

1.30

2.20

3.00

3.50

6.00

0.75

0.61

kg

D

mm

h2

mmmm mm

RatingClass 150 for 16 bar at 75C and 20 bar at 38C to EEMUA Publication No. 145: Section 2.

Composite Slip-on (Welded)Forged carbon steel backing flange with 90/10 CU Ni inner stub end.

Material CompositionBacking flange - ASTM A 105 (normalised) Unless otherwise specified the steel flanges will be suppliedgalvanised to BS EN ISO 1461. If required the galvanised flanges can be further protected with a Polymide epoxy type paint or a chlorinated rubber paint suitable for marine environments.

Composite Slip-on Flanges

d2

K

d5D

e

bR=3mmr=3mmd2

K

d5

D

t

bR=3mmr=3mm

d6

h2

h1

d1

d4

r=1mmSquareCorner

22


EEMUA 145 - Section 1B EEMUA 145 - Section 2A & Section 2B

Size d2

in

5/81 30 108 15.9 33 4 3 1.0 1.01.04 1.0479.4145/81 1/4 38 117 15.9 41 4 3 1.2 1.21.2 1.288.9145/81 1/2 44.5 127 15.9 48 4 3 1.5 1.51.5 1.598.4143/4572 152 19.0 62 4 3 2.5 2.52.6 2.6120.6183/42 1/2 76.1 178 19.0 81 4 3 3.3 3.33.4 3.4139.7183/488.93 190 19.0 94 4 3 3.8 3.83.9 3.9152.4193/41084 229 19.0 113 8 3 6.6 6.66.9 6.9190.5247/81596 279 22.2 164 8 4 9.7 9.910.4 10.7241.3277/8219.18 343 22.2 225 8 5 15.0 15.116.7 17.0298.431

26710 406 25.4 273 12 5 23.1 23.526.6 27.5362.038 1

323.912 483 25.4 330 12 7 34.6 35.241.0 43.1431.8141

5/83/4 25 98 15.9 28 4 3 0.8 0.80.8 0.869.814

1/2 5/816 89 15.9 19 4 2 0.64 0.640.66 0.6660.314

1 1/814 368 28.6 374 12 7 44.7 45.553.4 55.8476.2533 45

1 1/816 419 28.6 426 16 7 60.0 60.670.5 72.5539.8597 51

1 1/418 457.2 31.8 465 16 7 66.0 68.078.0 84.3577.8635 52

1 1/420 508 31.8 517 20 7 84.4 86.098.7 103.5635.0698 58

1 3/824 610 34.9 618 20 9 131.4 134149.8 156.5749.3813 71

1 3/828 711 34.9 727 28 9 180.3 183.6- -864.0927 81

1 5/832 813 41.1 829 28 9 269.0 275.5- -978.01060 95

1 5/836 914 41.1 931 32 9 335.8 341.0- -1086.01168 105

mm

Db

MinApprox. Total Weight

incl. Stub End-kg

mm

d5

mm

e

mm S 16 bar L S 20 bar L

No. ofBolt

Holes

K

mmmm mm mm

RatingClass 150 for 16 bar at 75C and 20 bar 38C to EEMUA Publication No. 145: Section 1.

Material CompositionASTM A 105 (normalised) Unless otherwise specified thesteel flanges will be supplied galvanised to BS EN ISO 1461. If required the galvanised flanges can be further protected with a Polymide epoxy type paint or chlorinated rubber paint suitable for marine environment.

Backing FlangesForged carbon steel backing flange for use with 90/10 CuNi inner stub end.

Composite Flanges To Suit Stub End

Size d4

in

1 30 30.08 18 108 14536

1 1/4 38 38.10 18 14545

1 1/2 44.5 44.60 19 127

117

14551

572 57.23 19 152 18667

2 1/2 76.1 76.33 19 178 18687

88.93 89.18 21 190 197100

1084 108.38 23 229 247120

3/4 25 25.08 16 98 14531

1/2

5/85/85/83/43/43/43/4

5/8

5/816 16.07 16

60

70

80

99

120

130

158

53

40 89 145

79.4

88.9

98.4

120.6

139.7

152.4

190.5

69.8

60.321

mm

d1

Inner Stub End - Dimensions Outer Steel Flange - Dimensions

d6

Approx.Total

WeightNo. ofBolt

Holesmm

h1

mm

b

mm

K

mm

38

47

53

69

89

103

123

33

23

d5

mm

15.9

15.9

15.9

19.0

19.0

19.0

19.0

15.9

15.9

mm

d2

mm

3

3

3

3

3

3

3

3

3

4

4

4

4

4

4

4

4

4

e

mm

0.92

1.10

1.30

2.20

3.00

3.50

6.00

0.75

0.61

kg

D

mm

h2

mmmm mm

RatingClass 150 for 16 bar at 75C and 20 bar at 38C to EEMUA Publication No. 145: Section 2.

Composite Slip-on (Welded)Forged carbon steel backing flange with 90/10 CU Ni inner stub end.

Material CompositionBacking flange - ASTM A 105 (normalised) Unless otherwise specified the steel flanges will be supplied galvanised to BS EN ISO 1461. If required the galvanised flanges can be further protected with a Polymide epoxy type paint or a chlorinated rubber paint suitable for marine environments.

Composite Slip-on Flanges

d2

K

d5D

e

bR=3mmr=3mmd2

K

d5

D

t

bR=3mmr=3mm

d6

h2

h1

d1

d4

r=1mmSquareCorner

23



Size

in

1/23/4

1 1/41 1/2

2 1/2

1 16 42 30 56 25.00 2.5 8 4 15.9 1.3030

17 51 38 57 33.03 2.5 8 4 15.9 1.7038

20 61 44.5 62 39.53 2.5 7 4 15.9 2.3044.5

2 25 73 57 64 52.16 2.5 9 4 19.0 4.1057

27 91 76.1 70 71.23 2.5 8 4 19.0 6.1076.1

3 27 105 88.9 70 84.08 2.5 8 4 19.0 7.1088.9

4 27 135 108 76 102.13 3.0 8 8 19.0 10.20108

6 27 192 159 89 153.00 3.0 8 8 22.2 15.50159

8 31 246 219.1 98 211.10 4.0 8 8 22.2 27.70219.1

10 31 305 267 98 257.97 4.5 8 12 25.4 38.50267

12 35 365 323.9 98 312.83 5.5 8 12 25.4 61.60323.9

16 32 25 52 21.0 2.0 7 4 15.9 1.0425

14 23 16 48 12.0 2.0 8 4 15.9 0.7216

14 41 400 368 99 354.22 6.5 8 12 28.6 86.80368

16 43 457 419 106 404.17 7.0 8 16 28.6 114.20419

18 45 505 457.2 113 441.5 8.0 8 16 31.8 136.00457.2

20 45 559 508 118 490.5 8.5 8 20 31.8 164.60508

24 49 664 610 137 589.5 10.5 8 20 34.9 247.70610

28 72 748 711 145 687.5 12.0 8 28 34.9 453.00711

32 72 876 813 160 786.5 13.5 8 28 41.1 599.00813

36 72 984 914 175 883.5 15.5 8 32 41.1 741.00914

mm

D

mm

b

mm

d6

mm

d3

mm

S1 min

mm

h1

mm

d7

mm

h2

mm

K

mm

d2

mm kg

108

117

127

152

178

190

229

279

343

406

483

98

89

533

597

635

698

813

927

1060

1168

79.4

88.9

98.4

120.6

139.7

152.4

190.5

241.3

298.4

362.0

431.8

69.8

60.3

476.2

539.8

577.8

635.0

749.3

864

978

1086

Approx.Total

Weight

No. ofBolt

Holes

DRILLINGOutside

Diameterof

Flange

Thicknessof

Flange

Thicknessof Hub atWelding

End

Diameterof

Hub

HubDiameterat WeldChamfer

Diameterof BoltCircle

Diameterof BoltHoles

LengthThrough

Hub

ParallelLength

onHub

Boreof

Flange

RatingClass 150 for 16 bar rated at 75C to EEMUA Publication No. 145: Section 3.

DimensionsUp to 610mm - based on BS 1560 (ASME B16.5) Class 150. Above 610mm - based on MSS SP-44, Class 150.

16 Bar Solid Weld-NeckSolid weld-neck flange forged from Cu Ni 90/10 standard stock.

Solid Weld-Neck Flanges

Size

in

1/23/4

1 1/41 1/2

2 1/2

1 16 42 30 56 25.00 2.5 8 4 15.9 1.3030

17 51 38 57 33.03 2.5 8 4 15.9 1.7038

20 61 44.5 62 39.53 2.5 7 4 15.9 2.3044.5

2 25 73 57 64 52.16 2.5 9 4 19.0 4.1057

27 91 76.1 70 71.23 2.5 8 4 19.0 6.1076.1

3 27 105 88.9 70 84.08 2.5 8 4 19.0 7.1088.9

4 27 135 108 76 102.13 3.0 8 8 19.0 10.20108

6 27 192 159 89 152.00 3.5 8 8 22.2 15.80159

8 31 246 219.1 98 210.10 4.5 8 8 22.2 28.00219.1

10 31 305 267 98 255.93 5.5 8 12 25.4 39.30267

12 35 365 323.9 98 309.74 7.0 8 12 25.4 62.90323.9

16 32 25 52 21.0 2.0 7 4 15.9 1.0425

14 23 16 48 12.0 2.0 8 4 15.9 0.7216

14 41 400 368 99 351.00 8.0 8 12 28.6 88.40368

16 43 457 419 106 399.84 9.0 8 16 28.6 115.60419

18 45 505 457.2 113 438.5 9.5 8 16 31.8 140.70457.2

20 45 559 508 118 486.5 11.0 8 20 31.8 168.40508

24 49 664 610 137 584.5 13.0 8 20 34.9 253.70610

28 72 748 711 145 681.5 15.0 8 28 34.9 461.10711

32 72 876 813 160 779.5 17.0 8 28 41.1 611.10813

36 72 984 914 175 876.5 19.0 8 32 41.1 755.70914

mm

D

mm

b

mm

d6

mm

d3

mm

S1 min

mm

h1

mm

d7

mm

h2

mm

K

mm

d2

mm kg

108

117

127

152

178

190

229

279

343

406

483

98

89

533

597

635

698

813

927

1060

1168

79.4

88.9

98.4

120.6

139.7

152.4

190.5

241.3

298.4

362.0

431.8

69.8

60.3

476.2

539.8

577.8

635.0

749.3

864

978

1086

Approx.Total

Weight

No. ofBolt

Holes

DRILLINGOutside

Diameterof

Flange

Thicknessof

Flange


End

Diameterof

Hub




LengthThrough

Hub

ParallelLength

onHub

Boreof

Flange





37 2

1.6mm 0.8 S1

h2

h1

b

d2

d6d3

d7KD

Square Corner

37 2

1.6mm 0.8 S1

h2

h1

b

d2

d6d3

d7KD

Square Corner

24



Size

in

1/23/4

1 1/41 1/2

2 1/2

1 16 42 30 56 25.00 2.5 8 4 15.9 1.3030

17 51 38 57 33.03 2.5 8 4 15.9 1.7038

20 61 44.5 62 39.53 2.5 7 4 15.9 2.3044.5

2 25 73 57 64 52.16 2.5 9 4 19.0 4.1057

27 91 76.1 70 71.23 2.5 8 4 19.0 6.1076.1

3 27 105 88.9 70 84.08 2.5 8 4 19.0 7.1088.9

4 27 135 108 76 102.13 3.0 8 8 19.0 10.20108

6 27 192 159 89 153.00 3.0 8 8 22.2 15.50159

8 31 246 219.1 98 211.10 4.0 8 8 22.2 27.70219.1

10 31 305 267 98 257.97 4.5 8 12 25.4 38.50267

12 35 365 323.9 98 312.83 5.5 8 12 25.4 61.60323.9

16 32 25 52 21.0 2.0 7 4 15.9 1.0425

14 23 16 48 12.0 2.0 8 4 15.9 0.7216

14 41 400 368 99 354.22 6.5 8 12 28.6 86.80368

16 43 457 419 106 404.17 7.0 8 16 28.6 114.20419

18 45 505 457.2 113 441.5 8.0 8 16 31.8 136.00457.2

20 45 559 508 118 490.5 8.5 8 20 31.8 164.60508

24 49 664 610 137 589.5 10.5 8 20 34.9 247.70610

28 72 748 711 145 687.5 12.0 8 28 34.9 453.00711

32 72 876 813 160 786.5 13.5 8 28 41.1 599.00813

36 72 984 914 175 883.5 15.5 8 32 41.1 741.00914

mm

D

mm

b

mm

d6

mm

d3

mm

S1 min

mm

h1

mm

d7

mm

h2

mm

K

mm

d2

mm kg

108

117

127

152

178

190

229

279

343

406

483

98

89

533

597

635

698

813

927

1060

1168

79.4

88.9

98.4

120.6

139.7

152.4

190.5

241.3

298.4

362.0

431.8

69.8

60.3

476.2

539.8

577.8

635.0

749.3

864

978

1086

Approx.Total

Weight

No. ofBolt

Holes

DRILLINGOutside

Diameterof

Flange

Thicknessof

Flange


End

Diameterof

Hub




LengthThrough

Hub

ParallelLength

onHub

Boreof

Flange





Size

in

1/23/4

1 1/41 1/2

2 1/2

1 16 42 30 56 25.00 2.5 8 4 15.9 1.3030

17 51 38 57 33.03 2.5 8 4 15.9 1.7038

20 61 44.5 62 39.53 2.5 7 4 15.9 2.3044.5

2 25 73 57 64 52.16 2.5 9 4 19.0 4.1057

27 91 76.1 70 71.23 2.5 8 4 19.0 6.1076.1

3 27 105 88.9 70 84.08 2.5 8 4 19.0 7.1088.9

4 27 135 108 76 102.13 3.0 8 8 19.0 10.20108

6 27 192 159 89 152.00 3.5 8 8 22.2 15.80159

8 31 246 219.1 98 210.10 4.5 8 8 22.2 28.00219.1

10 31 305 267 98 255.93 5.5 8 12 25.4 39.30267

12 35 365 323.9 98 309.74 7.0 8 12 25.4 62.90323.9

16 32 25 52 21.0 2.0 7 4 15.9 1.0425

14 23 16 48 12.0 2.0 8 4 15.9 0.7216

14 41 400 368 99 351.00 8.0 8 12 28.6 88.40368

16 43 457 419 106 399.84 9.0 8 16 28.6 115.60419

18 45 505 457.2 113 438.5 9.5 8 16 31.8 140.70457.2

20 45 559 508 118 486.5 11.0 8 20 31.8 168.40508

24 49 664 610 137 584.5 13.0 8 20 34.9 253.70610

28 72 748 711 145 681.5 15.0 8 28 34.9 461.10711

32 72 876 813 160 779.5 17.0 8 28 41.1 611.10813

36 72 984 914 175 876.5 19.0 8 32 41.1 755.70914

mm

D

mm

b

mm

d6

mm

d3

mm

S1 min

mm

h1

mm

d7

mm

h2

mm

K

mm

d2

mm kg

108

117

127

152

178

190

229

279

343

406

483

98

89

533

597

635

698

813

927

1060

1168

79.4

88.9

98.4

120.6

139.7

152.4

190.5

241.3

298.4

362.0

431.8

69.8

60.3

476.2

539.8

577.8

635.0

749.3

864

978

1086

Approx.Total

Weight

No. ofBolt

Holes

DRILLINGOutside

Diameterof

Flange

Thicknessof

Flange


End

Diameterof

Hub




LengthThrough

Hub

ParallelLength

onHub

Boreof

Flange





37 2

1.6mm 0.8 S1

h2

h1

b

d2

d6d3

d7KD

Square Corner

37 2

1.6mm 0.8 S1

h2

h1

b

d2

d6d3

d7KD

Square Corner

25


SizeFlange

DiameterFlange

Thicknessd3

in

16 89 16.07 14 20 23 4 4 0.6615.9 60.3

25 98 25.08 16 24 32 4 4 0.9115.9 69.8

1 30 108 30.08 16 24 47 4 4 1.1615.9 79.4

38 117 38.10 17 26 51 4 6 1.4015.9 88.9

44.5 127 44.60 20 26 61 4 6 1.9015.9 98.4

76.1 178 76.33 27 32 91 4 6 4.7019.0 139.7

57 152 57.23 25 28 73 4 6 3.3019.0 120.62

88.9 190 89.18 27 34 105 4 6 5.2019.0 152.43

108 229 108.38 27 40 135 8 8 7.7019.0 190.54

mm D mm b mm

No. ofBolt

Holes

Diameter ofBolt Holes

d2 mm

ApproxWeight

kgmm

d6

mm

h

mm

k

mm

r

mm

1/23/4

1 1/4

1 1/2

2 1/2

RatingClass 150 for 16 bar rated systems, (also for use with 20 bar rated systems) to EEMUA Publication No. 145: Section 4.

Dimensions(ASME B16.5) Class 150.

Solid slip-on flange forged from 90/10 CuNi Standard Stock.

Solid Slip-On Flanges

Size

in

1/23/4

1 1/41 1/2

2 1/2

1 108 79.4 15.9 12.7 4 1.3130

117 88.9 15.9 14.3 4 1.5838

127 98.4 15.9 15.9 4 1.944.5

1522 120.6 19.0 17.4 4 3.0157

178 139.7 19.0 20.6 4 4.6876.1

1903 152.4 19.0 22.2 4 5.7088.9

2294 190.5 19.0 22.2 8 8.67108

2796 241.3 22.2 22.2 8 15.46159

3438 298.4 22.2 23.8 8 24.9219.1

40610 362.0 25.4 27.0 12 41.23267

48312 431.8 25.4 30.2 12 70.55323.9

98 69.8 15.9 11.1 4 1.0425

89 60.3 15.9 9.5 4 0.8216

14 533 476.2 28.6 33.3 12 93.16368

16 597 539.8 28.6 34.9 16 123.99419

18 635 577.8 31.8 38.1 16 147.55457.2

20 698 635.0 31.8 41.3 20 191.00508

24 813 749.3 34.9 46.0 20 285.74610

28 927 863.6 34.9 69.4 28 434.66711

32 1060 978.0 41.1 78.8 28 665.63813

36 1168 1085.85

5/85/85/83/43/43/43/47/87/8

1

1

5/8

5/8

1 1/8

1 1/81 1/4

1 1/4

1 3/8

1 3/81 5/8

1 5/8 41.1 88.4 32 886.43914

mm

FlangeDiameter

D

Diameterof Disk

d4

FlangeThickness

b min

d2Dia. of Bolt

Holes

mm

K

mm in mm mm mm mm

Approx.Total

WeightNo. ofBolt

Holes

60

70

80

99

120

130

158

212

270

320

370

50

40

430

482

530

585

685

800

905

1000

BlindBlind steel outer flange, A 105.

Disk90/10 copper nickel.

DimensionsFlange:Up to 610mm - Based on BS 1560 (ASME B16.5) Class 150. Above 610mm - on MSS-SP-44, Class 150.

Spectacle, Ring and Blind Spade FlangesSpectacle, Ring and Blind Spade Flanges clad with 90/10 copper-nickel-iron are available insizes up to and including 36/914mm for Class 150, 16 bar and 20 bar.

Composite Blind Flanges

Material CompositeFlange: Forged carbon steel to ASTM A 105 (normalised). Unless otherwise specified the steel flanges will be supplied galvanised to (BS729/BS EN ISO 1461). If required the galvanised flanges can be further protected with polymide epoxy type paint or a chlorinated rubber paint suitable for marine environments.

RatingClass 150 for 16 bar rated systems for temperatures up to and including 75C and 20 bar rated systems up to 38C.

d2

d6

SquareCorner

d3

K

D

bh

r

d2

d4

b

h3=5mm

K

D



SizeFlange

DiameterFlange

Thicknessd3

in

16 89 16.07 14 20 23 4 4 0.6615.9 60.3

25 98 25.08 16 24 32 4 4 0.9115.9 69.8

1 30 108 30.08 16 24 47 4 4 1.1615.9 79.4

38 117 38.10 17 26 51 4 6 1.4015.9 88.9

44.5 127 44.60 20 26 61 4 6 1.9015.9 98.4

76.1 178 76.33 27 32 91 4 6 4.7019.0 139.7

57 152 57.23 25 28 73 4 6 3.3019.0 120.62

88.9 190 89.18 27 34 105 4 6 5.2019.0 152.43

108 229 108.38 27 40 135 8 8 7.7019.0 190.54

mm D mm b mm

No. ofBolt

Holes

Diameter ofBolt Holes

d2 mm

ApproxWeight

kgmm

d6

mm

h

mm

k

mm

r

mm

1/23/4

1 1/4

1 1/2

2 1/2

RatingClass 150 for 16 bar rated systems, (also for use with 20 bar rated systems) to EEMUA Publication No. 145: Section 4.

Dimensions(ASME B16.5) Class 150.

Solid slip-on flange forged from 90/10 CuNi Standard Stock.

Solid Slip-On Flanges

Size

in

1/23/4

1 1/41 1/2

2 1/2

1 108 79.4 15.9 12.7 4 1.3130

117 88.9 15.9 14.3 4 1.5838

127 98.4 15.9 15.9 4 1.944.5

1522 120.6 19.0 17.4 4 3.0157

178 139.7 19.0 20.6 4 4.6876.1

1903 152.4 19.0 22.2 4 5.7088.9

2294 190.5 19.0 22.2 8 8.67108

2796 241.3 22.2 22.2 8 15.46159

3438 298.4 22.2 23.8 8 24.9219.1

40610 362.0 25.4 27.0 12 41.23267

48312 431.8 25.4 30.2 12 70.55323.9

98 69.8 15.9 11.1 4 1.0425

89 60.3 15.9 9.5 4 0.8216

14 533 476.2 28.6 33.3 12 93.16368

16 597 539.8 28.6 34.9 16 123.99419

18 635 577.8 31.8 38.1 16 147.55457.2

20 698 635.0 31.8 41.3 20 191.00508

24 813 749.3 34.9 46.0 20 285.74610

28 927 863.6 34.9 69.4 28 434.66711

32 1060 978.0 41.1 78.8 28 665.63813

36 1168 1085.85

5/85/85/83/43/43/43/47/87/8

1

1

5/8

5/8

1 1/8

1 1/81 1/4

1 1/4

1 3/8

1 3/81 5/8

1 5/8 41.1 88.4 32 886.43914

mm

FlangeDiameter

D

Diameterof Disk

d4

FlangeThickness

b min

d2Dia. of Bolt

Holes

mm

K

mm in mm mm mm mm

Approx.Total

WeightNo. ofBolt

Holes

60

70

80

99

120

130

158

212

270

320

370

50

40

430

482

530

585

685

800

905

1000

BlindBlind steel outer flange, A 105.

Disk90/10 copper nickel.

DimensionsFlange: Up to 610mm - Based on BS 1560 (ASME B16.5) Class 150. Above 610mm - on MSS-SP-44, Class 150.

Spectacle, Ring and Blind Spade FlangesSpectacle, Ring and Blind Spade Flanges clad with 90/10 copper-nickel-iron are available in sizes up to and including 36/914mm for Class 150, 16 bar and 20 bar.

Composite Blind Flanges

Material CompositeFlange: Forged carbon steel to ASTM A 105 (normalised). Unless otherwise specified the steel flanges will be supplied galvanised to (BS729/BS EN ISO 1461). If required the galvanised flanges can be further protected with polymide epoxy type paint or a chlorinated rubber paint suitable for marine environments.

RatingClass 150 for 16 bar rated systems for temperatures up to and including 75C and 20 bar rated systems up to 38C.

d2

d6

SquareCorner

d3

K

D

bh

r

d2

d4

b

h3=5mm

K

D


EEM

UA 14

6

Sec

tion

1

Sec

tion

2

Sec

tion

3

Sec

tion

5

Sec

tion

6

Sec

tion

7

29


Nominal Size

in

1 1/41 1/2

2 1/2

1 2.5 3830

2.5 4838

2.5 5744.5

2 2.5 6457

2.5 7676.1

3 2.5 8688.9

4 3.0 105108

6 3.0 143159

8 4.0 178219.1

10 4.5 216267

12 5.5 254323.9

14 6.5 279368

16 7.0 305419

18 8.0 343457.2

20 8.5 381508

24 10.5 432610

28 12.0 521711

32 13.5 597813

36 15.5

2.5

2.5

2.5

2.5

2.5

2.5

3.0

3.5

4.5

5.5

7.0

8.0

9.0

9.5

11.0

13.0

15.0

17.0

19.0 673

40

50

59

66

78

88

107

145

180

218

257

282

308

346

384

435

524

602

678

36

46

55

62

74

84

103

141

176

214

251

276

302

340

378

429

518

592

668914

Pipe size a=b

nommax minmm mm mm

16 bar 20 bar

Pipe Wall Thickness ()

DimensionsBased on EEMUA Publication No. 146: Section 1, for 16 bar rated systems operating at temperatures up to and including 75C, also Tees suitable for 20 bar rated systems operating at temperatures up to and including 38C.

Weld PreparationWall thickness of 3mm and greater are chamfered to 37 1/2 2 1/2 with a root face of 1.6mm 0.8mm.Seamless up to and including 219mm welded from 267-914 mm OD with 100% radiographic inspectionto ASME Code Section VIII. UW51.

Tee Pieces I Equal Tee Pieces

ElbowSize

mm

2.5 2944.5

2.5 3557

2.5 4476.1

2.5 5188.9

3.0 64108

3.0 95159

4.0 127219.1

4.5 159267

5.5 190323.9

6.5 222368

7.0 254419

8.0 286457.2

8.5 318508

10.5 381610

12.0 438711

13.5 502813

15.5

2.5

2.5

2.5

2.5

3.0

3.5

4.5

5.5

7.0

8.0

9.0

9.5

11.0

13.0

15.0

17.0

19.0 565

27

33

42

49

62

93

125

157

187

219

251

283

315

378

435

497

560

31

37

46

53

66

97

129

161

193

225

257

289

321

384

441

507

570

57

76

95

114

152

229

305

381

457

533

610

686

762

914

1067

1219

1372

55

74

93

112

150

227

303

379

454

530

607

683

759

911

1064

1214

1367

59

78

97

116

154

231

307

383

460

536

613

689

765

917

1070

1224

1377

0.15

0.25

0.45

0.65

1.0

2.3

6.0

10

17

27

38

54

71

126

197

289

420

0.15

0.25

0.45

0.65

1.0

2.7

6.5

12

23

34

50

64

92

156

245

362

513

0.30

0.52

0.90

1.25

2.10

4.70

12

20

35

55

77

109

142

252

394

579

841

0.30

0.52

0.90

1.25

2.10

5.50

13

24

45

67

99

128

184

312

490

725

1026914

16 bar 20 bar

mm mm mm mm mm mm kg kg

9045

nomnom

mm

max

mm

min

mm

max

mm

min45

16 bar45

20 bar90

16 bar90

20 bar

E-Centre to FaceSpecifiedPipe Thickness T Approx. Weight

RadiusNominally 1.5 x OD - Based on ASME B16.9 and complying with EEMUA Publication No. 146: Section 1.

One-piece / Welded Half Shells Construction.Elbows for pipes up to and including 267mm size are normally supplied as seamless.

Elbows for larger diameter pipes are made from half shells, longitudinally welded. 45 and 90 elbows are available in all sizes.

Butt Weld Elbows (Long Radius)

Weld PreparationWall thickness and 1 of 3mm and greater are chamfered to 37 1/2 2 1/2 with a root face of 1.6mm 0.8mm.

Weld Inspection100% radiographic inspection to ASME Code, Section VIII. UW51.

t

t

b

aa

E t

T

IDE

E

ID

E t

t = intrados thickness (mlm)in accordance with EEMUAPublication No.146 Section 1

T



Nominal Size

in

1 1/41 1/2

2 1/2

1 2.5 3830

2.5 4838

2.5 5744.5

2 2.5 6457

2.5 7676.1

3 2.5 8688.9

4 3.0 105108

6 3.0 143159

8 4.0 178219.1

10 4.5 216267

12 5.5 254323.9

14 6.5 279368

16 7.0 305419

18 8.0 343457.2

20 8.5 381508

24 10.5 432610

28 12.0 521711

32 13.5 597813

36 15.5

2.5

2.5

2.5

2.5

2.5

2.5

3.0

3.5

4.5

5.5

7.0

8.0

9.0

9.5

11.0

13.0

15.0

17.0

19.0 673

40

50

59

66

78

88

107

145

180

218

257

282

308

346

384

435

524

602

678

36

46

55

62

74

84

103

141

176

214

251

276

302

340

378

429

518

592

668914

Pipe size a=b

nommax minmm mm mm

16 bar 20 bar


DimensionsBased on EEMUA Publication No. 146: Section 1, for 16 bar rated systems operating at temperatures up to and including 75C, also Tees suitable for 20 bar rated systems operating at temperatures up to and including 38C.

Weld PreparationWall thickness of 3mm and greater are chamfered to 37 1/2 2 1/2 with a root face of 1.6mm 0.8mm.Seamless up to and including 219mm welded from 267-914 mm OD with 100% radiographic inspection to ASME Code Section VIII. UW51.

Tee Pieces I Equal Tee Pieces

ElbowSize

mm

2.5 2944.5

2.5 3557

2.5 4476.1

2.5 5188.9

3.0 64108

3.0 95159

4.0 127219.1

4.5 159267

5.5 190323.9

6.5 222368

7.0 254419

8.0 286457.2

8.5 318508

10.5 381610

12.0 438711

13.5 502813

15.5

2.5

2.5

2.5

2.5

3.0

3.5

4.5

5.5

7.0

8.0

9.0

9.5

11.0

13.0

15.0

17.0

19.0 565

27

33

42

49

62

93

125

157

187

219

251

283

315

378

435

497

560

31

37

46

53

66

97

129

161

193

225

257

289

321

384

441

507

570

57

76

95

114

152

229

305

381

457

533

610

686

762

914

1067

1219

1372

55

74

93

112

150

227

303

379

454

530

607

683

759

911

1064

1214

1367

59

78

97

116

154

231

307

383

460

536

613

689

765

917

1070

1224

1377

0.15

0.25

0.45

0.65

1.0

2.3

6.0

10

17

27

38

54

71

126

197

289

420

0.15

0.25

0.45

0.65

1.0

2.7

6.5

12

23

34

50

64

92

156

245

362

513

0.30

0.52

0.90

1.25

2.10

4.70

12

20

35

55

77

109

142

252

394

579

841

0.30

0.52

0.90

1.25

2.10

5.50

13

24

45

67

99

128

184

312

490

725

1026914

16 bar 20 bar

mm mm mm mm mm mm kg kg

9045

nomnom

mm

max

mm

min

mm

max

mm

min45

16 bar45

20 bar90

16 bar90

20 bar

E-Centre to FaceSpecifiedPipe Thickness T Approx. Weight

RadiusNominally 1.5 x OD - Based on ASME B16.9 and complying with EEMUA Publication No. 146: Section 1.

One-piece / Welded Half ShellsConstruction.Elbows for pipes up to and including 267mm size are normally supplied asseamless.

Elbows for larger diameter pipes are made from half shells, longitudinally welded. 45 and 90 elbows are available in all sizes.

Butt Weld Elbows (Long Radius)

Weld PreparationWall thickness and 1 of 3mm and greater are chamfered to 37 1/2 2 1/2 with a root face of 1.6mm 0.8mm.

Weld Inspection100% radiographic inspection to ASME Code, Section VIII. UW51.

t

t

b

aa

E t

T

IDE

E

ID

E t

t = intrados thickness (mlm)in accordance with EEMUAPublication No.146 Section 1

T



Size

mm mm mm mm mm mm MinMax Nom Max

OUTLET bRun a

Centre-to-end (mm)

Nom Min


38

44.5

5757

44.544.5

3038

5776.176.176.188.988.988.9108108108159159159

219.1

267

323.9267

267219.1

219.1

323.9323.9

38

44.5

5757

44.544.5

3038

5776.176.176.188.988.988.9108108108159159159

219.1

267

323.9267

267219.1

219.1

323.9323.9

25

25

3844.5

3038

2530

3057

44.538

76.157

44.588.976.157

10888.976.1

108

159

267108

219.188.9

159

219.1159

2.5

2.5

2.52.5

2.52.5

2.52.5

2.52.52.52.52.52.52.53.03.03.03.03.03.0

4.0

4.5

5.54.5

4.54.0

4.0

5.55.5

2.5

2.5

2.52.5

2.52.5

2.52.5

2.52.52.52.52.52.52.53.03.03.03.03.03.0

4.0

4.5

5.54.5

4.54.0

4.0

5.55.5

2.0

2.0

2.52.5

2.52.5

2.02.5

2.52.52.52.52.52.52.52.52.52.53.02.52.5

3.0

3.0

4.53.0

4.02.5

3.0

4.03.0

50

59

6666

5959

4050

66787878888888107107107145145145

180

218

257218

218180

180

257257

50

59

5962

5959

4050

53726966857875

1009791

132126123

158

196

244186

205154

170

232222

48

57

6464

5757

3848

64767676868686105105105143143143

178

216

254216

216178

178

254254

48

57

5760

5757

3848

51706764837673989589130124121

156

194

241184

203152

168

229219

46

55

6262

5555

3646

62747474848484103103103141141141

176

214

251214

214176

176

251251

46

55

5558

5555

3646

49686562817471969387128122119

154

192

238182

201150

166

226216

x x x x

DimensionsBased on EEMUA Publication No. 146: Section 1, for 16 bar rated systems operating at temperatures up to and including 75C, also Tees suitable for 20 bar rated systems operating at temperatures up to and including 38C. are as stated in Equal Tee columns.

Weld PreparationWall thickness of 3mm and greater are chamfered to 37 1/2 2 1/2 with a root face of 1.6mm 0.8mm.Seamless up to and including 219mm welded from 267-914 mm OD with 100% radiographic inspection to ASME Code Section VIII. UW51.

Tee Pieces I Reducing Tee Pieces

(Forward)

Size


OUTLET bRun a

Centre-to-end (mm)

Nom Min


368368368419419419

457.2457.2457.2508508508

610

711711

610610

711813813813914914914

368368368419419419

457.2457.2457.2508508508

610

711711

610610

711813813813914914914

323.9267

219.1368

323.9267419368

323.9457.2419368

419

508610

457.2508

457.2711610508813711610

6.56.56.57.07.07.08.08.08.08.58.58.5

10.5

12.012.0

10.510.5

12.013.513.513.515.515.515.5

6.56.56.57.07.07.08.08.08.08.58.58.5

10.5

12.012.0

10.510.5

12.013.513.513.515.515.515.5

5.54.54.06.55.54.57.06.55.58.07.06.5

7.0

8.510.5

8.08.5

8.012.010.58.513.512.010.5

282282282308308308346346346384384384

435

524524

435435

524602602602678678678

273260251308298286333333324371359359

409

486511

422435

473577564538653627615

279279279305305305343343343381381381

432

521521

432432

521597597597673673673

270257248305295283330330321368356356

406

483508

419432

470572559533648622610

276276276302302302340340340378378378

429

518518

429429

518592592592668668668

267254245302292280327327318365353353

403

480505

416429

467567554528643617605

x x x x

t

t b

aa



Size


OUTLET bRun a

Centre-to-end (mm)

Nom Min


38

44.5

5757

44.544.5

3038

5776.176.176.188.988.988.9108108108159159159

219.1

267

323.9267

267219.1

219.1

323.9323.9

38

44.5

5757

44.544.5

3038

5776.176.176.188.988.988.9108108108159159159

219.1

267

323.9267

267219.1

219.1

323.9323.9

25

25

3844.5

3038

2530

3057

44.538

76.157

44.588.976.157

10888.976.1

108

159

267108

219.188.9

159

219.1159

2.5

2.5

2.52.5

2.52.5

2.52.5

2.52.52.52.52.52.52.53.03.03.03.03.03.0

4.0

4.5

5.54.5

4.54.0

4.0

5.55.5

2.5

2.5

2.52.5

2.52.5

2.52.5

2.52.52.52.52.52.52.53.03.03.03.03.03.0

4.0

4.5

5.54.5

4.54.0

4.0

5.55.5

2.0

2.0

2.52.5

2.52.5

2.02.5

2.52.52.52.52.52.52.52.52.52.53.02.52.5

3.0

3.0

4.53.0

4.02.5

3.0

4.03.0

50

59

6666

5959

4050

66787878888888107107107145145145

180

218

257218

218180

180

257257

50

59

5962

5959

4050

53726966857875

1009791

132126123

158

196

244186

205154

170

232222

48

57

6464

5757

3848

64767676868686105105105143143143

178

216

254216

216178

178

254254

48

57

5760

5757

3848

51706764837673989589130124121

156

194

241184

203152

168

229219

46

55

6262

5555

3646

62747474848484103103103141141141

176

214

251214

214176

176

251251

46

55

5558

5555

3646

49686562817471969387128122119

154

192

238182

201150

166

226216

x x x x

DimensionsBased on EEMUA Publication No. 146: Section 1, for 16 bar rated systems operating at temperatures up to and including 75C, also Tees suitable for 20 bar rated systems operating at temperatures up to and including 38C. are as stated in Equal Tee columns.

Weld PreparationWall thickness of 3mm and greater are chamfered to 37 1/2 2 1/2 with a root face of 1.6mm 0.8mm.Seamless up to and including 219mm welded from 267-914 mm OD with 100% radiographic inspectionto ASME Code Section VIII. UW51.

Tee Pieces I Reducing Tee Pieces

(Forward)

Size


OUTLET bRun a

Centre-to-end (mm)

Nom Min


368368368419419419

457.2457.2457.2508508508

610

711711

610610

711813813813914914914

368368368419419419

457.2457.2457.2508508508

610

711711

610610

711813813813914914914

323.9267

219.1368

323.9267419368

323.9457.2419368

419

508610

457.2508

457.2711610508813711610

6.56.56.57.07.07.08.08.08.08.58.58.5

10.5

12.012.0

10.510.5

12.013.513.513.515.515.515.5

6.56.56.57.07.07.08.08.08.08.58.58.5

10.5

12.012.0

10.510.5

12.013.513.513.515.515.515.5

5.54.54.06.55.54.57.06.55.58.07.06.5

7.0

8.510.5

8.08.5

8.012.010.58.513.512.010.5

282282282308308308346346346384384384

435

524524

435435

524602602602678678678

273260251308298286333333324371359359

409

486511

422435

473577564538653627615

279279279305305305343343343381381381

432

521521

432432

521597597597673673673

270257248305295283330330321368356356

406

483508

419432

470572559533648622610

276276276302302302340340340378378378

429

518518

429429

518592592592668668668

267254245302292280327327318365353353

403

480505

416429

467567554528643617605

x x x x

t

t b

aa



DimensionsComply with EEMUA Publication No. 146 Section 1.

TypeEccentric reducers are either one-piece or fabricated welded construction.

Reducers I EccentricWeld PreparationWall thickness and 1 of 3mm and greater are chamfered to 37 1/2 2 1/2 with a root face of 1.6mm 0.8mm.

Inspection of Welds100% radiographic inspection to ASME Code Section VIII. UW51.

DimensionsComply with EEMUA Publication No. 146 Section 1.

TypeConcentric reducers are either one-piece or fabricated welded construction.

Reducers I ConcentricWeld PreparationWall thickness and 1 of 3mm and greater are chamfered to 37 1/2 2 1/2 with a root face of 1.6mm 0.8mm.


NoteReducers in sizes smaller than 57mm are available on request.

323.9 x 267

368 x 219.1

368 x 267

368 x 323.9

419 x 267

419 x 323.9

419 x 368

457.2 x 323.9

457.2 x 368

457.2 x 419

508 x 368

508 x 419

508 x 457.2

610 x 419

610 x 457.2

610 x 508

711 x 457.2

711 x 508

711 x 610

813 x 610

813 x 711

203

330

330

330

356

356

356

381

381

381

508

508

508

508

508

508

610

610

610

610

610

511

511

511

511

511

511

613

613

613

615

615

505

505

505

505

505

505

607

607

607

605

605

9.38

17.24

18.68

20.39

23.44

25.43

26.97

32.65

34.53

36.71

51.93

55.01

57.32

75.27

78.13

81.92

117.26

122.46

132.96

160.94

172.59

11.87

21.50

23.00

25.00

30.00

32.50

34.50

39.00

41.00

43.50

67.00

71.00

74.00

93.00

96.50

101.00

-

-

-

-

-

5.5 x 4.5

6.5 x 4.0

6.5 x 4.5

6.5 x 5.5

7.0 x 4.5

7.0 x 5.5

7.0 x 6.5

8.0 x 5.5

8.0 x 6.5

8.0 x 7.0

8.5 x 6.5

8.5 x 7.0

8.5 x 8.0

10.5 x 7.0

10.5 x 8.0

10.5 x 8.5

12.0 x 8.0

12.0 x 8.5

12.0 x 10.5

13.5 x 10.5

13.5 x 12.0

7.0 x 5.5

8.0 x 4.5

8.0 x 5.5

8.0 x 7.0

9.0 x 5.5

9.0 x 7.0

9.0 x 8.0

9.5 x 7.0

9.5 x 8.0

9.5 x 9.0

11.0 x 8.0

11.0 x 9.0

11.0 x 9.5

13.0 x 9.0

13.0 x 9.5

13.0 x 11.0

-

-

-

-

-

Pipe Size

in

57 x 38

57 x 44.5

88.9 x 57

57 x 30

76.1 x 57

88.9 x 76.1

108 x 57

108 x 76.1

108 x 88.9

159 x 57

159 x 76.1

159 x 88.9

159 x 108

219.1 x 76.1

219.1 x 88.9

219.1 x 108

219.1 x 159

267 x 108

267 x 159

267 x 219.1

323.9 x 159

323.9 x 219.1

76

76

89

76

89

89

102

102

102

140

140

140

140

152

152

152

152

178

178

178

203

203

0.29

0.29

0.44

0.29

0.40

0.50

0.67

0.75

0.80

1.32

1.44

1.52

1.64

2.49

2.60

2.77

3.21

4.84

5.52

6.31

7.63

8.60

0.29

0.29

0.44

0.29

0.40

0.50

0.67

0.75

0.80

1.54

1.68

1.77

1.91

2.79

2.92

3.11

3.60

5.89

6.71

7.68

9.65

10.89

2.5 x 2.5

2.5 x 2.5

2.5 x 2.5

2.5 x 2.5

2.5 x 2.5

2.5 x 2.5

3.0 x 2.5

3.0 x 2.5

3.0 x 2.5

3.0 x 2.5

3.0 x 2.5

3.0 x 2.5

3.0 x 3.0

4.0 x 2.5

4.0 x 2.5

4.0 x 3.0

4.0 x 3.0

4.5 x 3.0

4.5 x 3.0

4.5 x 4.0

5.5 x 3.0

5.5 x 4.0

2.5 x 2.5

2.5 x 2.5

2.5 x 2.5

2.5 x 2.5

2.5 x 2.5

2.5 x 2.5

3.0 x 2.5

3.0 x 2.5

3.0 x 2.5

3.5 x 2.5

3.5 x 2.5

3.5 x 2.5

3.5 x 3.0

4.5 x 2.5

4.5 x 2.5

4.5 x 3.0

4.5 x 3.5

5.5 x 3.0

5.5 x 3.5

5.5 x 4.5

7.0 x 3.5

7.0 x 4.5

Length H

mm mm mm kgkg

16 barnom

206

333

333

333

359

359

359

384

384

384

78

78

91

78

91

91

104

104

104

142

142

142

142

154

154

154

154

180

180

180

206

206

mm

max

200

327

327

327

353

353

353

378

378

378

74

74

87

74

87

87

100

100

100

138

138

138

138

150

150

150

150

176

176

176

200

200

mm

min 20 bar

Specified Wall Thickness 1 x

16 bar 20 bar

Approx Weight

Building-in dimensions for Concentric And Eccentric Reducers (mm)

H

t1

t

t

t1

H



DimensionsComply with EEMUA Publication No. 146Section 1.

TypeEccentric reducers are either one-piece orfabricated welded construction.

Reducers I EccentricWeld PreparationWall thickness and 1 of 3mm and greater are chamfered to 37 1/2 2 1/2 with a root face of 1.6mm 0.8mm.


DimensionsComply with EEMUA Publication No. 146Section 1.

TypeConcentric reducers are either one-piece orfabricated welded construction.

Reducers I ConcentricWeld PreparationWall thickness and 1 of 3mm and greater are chamfered to 37 1/2 2 1/2 with a root face of 1.6mm 0.8mm.


NoteReducers in sizes smaller than 57mm are available on request.

323.9 x 267

368 x 219.1

368 x 267

368 x 323.9

419 x 267

419 x 323.9

419 x 368

457.2 x 323.9

457.2 x 368

457.2 x 419

508 x 368

508 x 419

508 x 457.2

610 x 419

610 x 457.2

610 x 508

711 x 457.2

711 x 508

711 x 610

813 x 610

813 x 711

203

330

330

330

356

356

356

381

381

381

508

508

508

508

508

508

610

610

610

610

610

511

511

511

511

511

511

613

613

613

615

615

505

505

505

505

505

505

607

607

607

605

605

9.38

17.24

18.68

20.39

23.44

25.43

26.97

32.65

34.53

36.71

51.93

55.01

57.32

75.27

78.13

81.92

117.26

122.46

132.96

160.94

172.59

11.87

21.50

23.00

25.00

30.00

32.50

34.50

39.00

41.00

43.50

67.00

71.00

74.00

93.00

96.50

101.00

-

-

-

-

-

5.5 x 4.5

6.5 x 4.0

6.5 x 4.5

6.5 x 5.5

7.0 x 4.5

7.0 x 5.5

7.0 x 6.5

8.0 x 5.5

8.0 x 6.5

8.0 x 7.0

8.5 x 6.5

8.5 x 7.0

8.5 x 8.0

10.5 x 7.0

10.5 x 8.0

10.5 x 8.5

12.0 x 8.0

12.0 x 8.5

12.0 x 10.5

13.5 x 10.5

13.5 x 12.0

7.0 x 5.5

8.0 x 4.5

8.0 x 5.5

8.0 x 7.0

9.0 x 5.5

9.0 x 7.0

9.0 x 8.0

9.5 x 7.0

9.5 x 8.0

9.5 x 9.0

11.0 x 8.0

11.0 x 9.0

11.0 x 9.5

13.0 x 9.0

13.0 x 9.5

13.0 x 11.0

-

-

-

-

-

Pipe Size

in

57 x 38

57 x 44.5

88.9 x 57

57 x 30

76.1 x 57

88.9 x 76.1

108 x 57

108 x 76.1

108 x 88.9

159 x 57

159 x 76.1

159 x 88.9

159 x 108

219.1 x 76.1

219.1 x 88.9

219.1 x 108

219.1 x 159

267 x 108

267 x 159

267 x 219.1

323.9 x 159

323.9 x 219.1

76

76

89

76

89

89

102

102

102

140

140

140

140

152

152

152

152

178

178

178

203

203

0.29

0.29

0.44

0.29

0.40

0.50

0.67

0.75

0.80

1.32

1.44

1.52

1.64

2.49

2.60

2.77

3.21

4.84

5.52

6.31

7.63

8.60

0.29

0.29

0.44

0.29

0.40

0.50

0.67

0.75

0.80

1.54

1.68

1.77

1.91

2.79

2.92

3.11

3.60

5.89

6.71

7.68

9.65

10.89

2.5 x 2.5

2.5 x 2.5

2.5 x 2.5

2.5 x 2.5

2.5 x 2.5

2.5 x 2.5

3.0 x 2.5

3.0 x 2.5

3.0 x 2.5

3.0 x 2.5

3.0 x 2.5

3.0 x 2.5

3.0 x 3.0

4.0 x 2.5

4.0 x 2.5

4.0 x 3.0

4.0 x 3.0

4.5 x 3.0

4.5 x 3.0

4.5 x 4.0

5.5 x 3.0

5.5 x 4.0

2.5 x 2.5

2.5 x 2.5

2.5 x 2.5

2.5 x 2.5

2.5 x 2.5

2.5 x 2.5

3.0 x 2.5

3.0 x 2.5

3.0 x 2.5

3.5 x 2.5

3.5 x 2.5

3.5 x 2.5

3.5 x 3.0

4.5 x 2.5

4.5 x 2.5

4.5 x 3.0

4.5 x 3.5

5.5 x 3.0

5.5 x 3.5

5.5 x 4.5

7.0 x 3.5

7.0 x 4.5

Length H

mm mm mm kgkg

16 barnom

206

333

333

333

359

359

359

384

384

384

78

78

91

78

91

91

104

104

104

142

142

142

142

154

154

154

154

180

180

180

206

206

mm

max

200

327

327

327

353

353

353

378

378

378

74

74

87

74

87

87

100

100

100

138

138

138

138

150

150

150

150

176

176

176

200

200

mm

min 20 bar

Specified Wall Thickness 1 x

16 bar 20 bar

Approx Weight

Building-in dimensions for Concentric And Eccentric Reducers (mm)

H

t1

t

t

t1

H


EEMUA 146 - Section 1 EEMUA 146 - Section 2, 3 & 5

NominalSize

in

1 1/41 1/2

2 1/2

1 2.25 0.0330

2.25 0.0538

2.25 0.0844.5

2 2.25 0.1157

2.25 0.1876.1

3 2.25 0.2488.9

4 2.70 0.40108

6 2.63 0.80159

8 3.54 2.0219.1

10 4.29 3.4267

12 5.24 5.9323.9

14 5.90 9.1368

16 6.73 12.4419

18 7.33 17.6457.2

20 8.15 22.7508

24 9.81 39.2610

28 11.5 61.8711

32 13.17 90.5813

36 14.81

16.0

17.5

19.6

22.0

25.7

28.2

31.7

41

55

69

80

93

102

119

129

148

176

200

221 132.2

0.03

0.05

0.08

0.11

0.18

0.24

0.40

0.97

2.40

4.10

7.70

11.90

16.90

20.90

30.80

51.60

81.40

117.40

166.20914

SpecifiedSize 20 bar

mm

4.5

5.7

7.6

8.9

11

16

22

27

32

37

42

46

51

61

71

81

91

R1 min

mm

44.5

57

76.1

88.9

108

159

219.1

267

323.9

368

419

457.2

508

610

711

813

914

R2 max

mm mm mm

h1 + h2

16.0

17.5

19.6

22.0

25.7

28.2

31.7

44

60

69

85

103

112

119

139

163

191

210

231

mm kg

16 bar

kg

h1 + h2

16 bar 20 bar Approx. Weight

min

2.25

2.25

2.25

2.25

2.25

2.25

2.70

3.12

4.29

5.23

6.34

7.21

8.21

8.97

9.96

11.96

13.97

15.97

17.96

mm

min

DimensionsComply with EEMUA Publication No. 146 Section 1 : with added compensatory thickness over and above the minimum pipe wall thickness.

The knuckle radius, and dished end radius R1 (min) & R2 (max) respectively comply with the requirements of the EEMUA Publication.

Butt Weld End CapsWeld PreparationWall thickness of 3mm and greater are chamfered 37 1/2 2 1/2 with a root face of 1.6mm 0.8mm.

RatingTo suit 14-20 bar pressures up to and including 38C.

Capillary End and Socket Weld Fittings

CAPILLARY END - N SOCKET WELD - NS

30

38

44.5

57

25

16

13

13

13

16

13

10

30

30

31

38

30

23

mmmm mm

Socket DepthLengthFitting Size

1. STRAIGHT COUPLING

38 x 16

38 x 25

38 x 30

44.5 x 16

30 x 25

30 x 16

44.5 x 30

44.5 x 38

57 x 16

57 x 25

44.5 x 25

57 x 30

57 x 38

57 x 44.5

3

Nautic Steels Catalogue 2014b (1)

Documents

Transcript of Nautic Steels Catalogue 2014b (1)