Natural smoke ventilators to meet the performance and ... · Krystalite AOV Glazed Louvre Smoke &...
Transcript of Natural smoke ventilators to meet the performance and ... · Krystalite AOV Glazed Louvre Smoke &...
www.powrmatic.co.uk
Krystalite & OpenskySmoke & Natural VentilationEN12101-2 Tested Ventilators
Natural smoke ventilators to meet the performance and aesthetic requirements of building operators, architects, specifies and contractors. The Powrmatic Ventilation Range.
EN TestedAll of the smoke control products listed in this leaflet have been tested to international standards and have been CE Marked.
European standards are technical standards drafted and maintained by CEN,CENELEX AND ETSI. Standards include requirements and/or recommendations in relation to products, systems, processes or services. Standards can also be used to describe a measurement or a test method or to establish a common terminology within a specific sector.
Powrmatic products have been tested to EN 12101-2. This standard covers products in the sector of smoke control. EN12101-2 covers Natural Smoke and Heat Exhaust Ventilators (N-SHEV’s).
Krystalite AOV Glazed Louvre Smoke & Natural Ventilator
Style SafetyBespokeThe Krystalite from Powrmatic
Our most advanced architectural smoke and natural ventilator which combines aesthetics, function and fire safety for facade building integration.
The aesthetically pleasing product matches modern day design with high performance. Making it a perfect cost effective solution for replacing window systems whilst adding the ability of smoke ventilation.
Krystalite Product Benefits
SMOKE VENTILATION SYSTEM
CUSTOM BUILTTO SIZE
SINGLE/DOUBLEDTRIPLE
GLAZING ADAPTORTO SUIT ANY FACADE
EN12101-2 TESTED VENTILATOR
BS-EN12101:2
2003
PROVEN & STYLISH DESIGN
2
Krystalite AOV Glazed Louvre Smoke & Natural Ventilator
StyleThe Krystalite glass louvre system is designed around a proven combination of aluminium blade channels, extruded aluminium frames and adaptors to meet the requirements of specifiers. This aesthetically pleasing product matches modern building design coupled with high integrity engineering whilst meeting all technical standards. The concealed blade operating mechanism housed within the perimeter frame gives the louvre a clean uncluttered appearance. When closed the security blade channels prevent removal of glass blades and all fixings are concealed and inaccessible.
Bespoke sizeYou can choose the height and width of Krystalite needed in your structure. Additional modules can be joined together with a system of coupling mullions and transoms for horizontal and vertical joining of units forming a glass louvre facade of almost infinite dimensions.
Safety & SustainabilityThis architectural ventilator offers the occupants and building natural daylight with efficient natural ventilation and the confidence that in case of an emergency, it can be used as part of a natural Smoke and Heat Exhaust Ventilation System (N-SHEVS) and comfort ventilation. The Krystalite is conscious of the future and is a sustainable product in itself. The low U values allow for great insulated buildings, key for building a sustainable future.
Versatile application The Krystalite is suitable for a wide range of applications. These applications include glazing systems, facades, curtain wall frames and block work openings . Making it the perfect solution for offices, shopping centres, industrial buildings and atriums. In essence, the application options are endless for the Krystalite.
FinishThe Krystalite is available in various finishes. This includes various glazing options from single to triple glazing as well as insulated aluminium.The frame colour is completely customisable allowing the Krystalite to effortlessly blend into any application. The colour finishes are natural anodised or Polyester powder coated to a standard RAL colour.
Approvals The Krystalite offers excellent U- values to keep the buildings appropriately insulated. For example the DG24 offers U-Value of 1.1W/ m²K whilst the TG34 offers U-Values of 0.5W/m²K. The Krystalite offers an impressive noise reduction of up to 41dB(a) which allows for far greater acceptance from building standards and authorities in modern buildings. The Powrmatic Krystalite is fully tested to BS EN 12101-2:2003 therefore fit for purpose in any N-SHEV (Natural, smoke and heat exhaust ventilation )
ProductFeatures
3
Vertical Section Horizontal Section
Single Glazed G12Single Glazed 12mmEN12101 -2 Tested
Double Glazed DG24 Double Glazed 24mm
EN12101-2 Tested
Vertical Section Horizontal Section
BS-EN12101:2
2003
BS-EN12101:2
2003
* Other glass specifications are available please contact us for details.
Typical Profile DesignKrystalite
4
Technical SpecificationKrystalite
Mitnehmer 10mmaufgefahren. Auf-bau geschlossenerZustand
HE
IGH
T O
F V
EN
T
WIDTH OF VENT O/A WIDTH OF FLANGE
O/A
HE
IGH
T O
F FL
AN
GE
WIDTH OF OPENING H
EIG
HT
OF
OP
EN
ING
Custom SizeYou can choose the height and width of Krystalite needed in
your structure.
Additional modules can be joined together with a system of coupling mullions and transoms for horizontal and vertical joining
of units forming a glass louvre façade of almost infinite
dimensions.
(Dimensions limits may apply for smoke ventilation)
U-Values & dB(a)The Krystalite offers excellent
U- values to keep the buildings appropriately insulated. For example
the DG24 offers U-Value of 1.1W/m²K whilst the TG34 offers
U-Values of 0.5W/m²K.
The Krystalite offers an impressive noise reduction of up to 41dB(a)
which allows for far greater acceptance from building standards and authorities in modern buidlings.
Finish OptionsThe Krystalite is available in
various finishes. This includes various glazing options from single
to triple glazing as well as insulated aluminum.
The frame colour is completely customisable allowing the Krystalite to effortlessly blend into any facade.
The colour finishes are natural anodised or Polyester powder
coated to a standard BS or RAL colour.
* For free areas please contact us.
5
Krystalite Installations
6
KrystaliteInstallations
7
EN TestedAll of the smoke control products listed in this leaflet have been tested to international standards and have been CE Marked.
European standards are technical standards drafted and maintained by CEN,CENELEX AND ETSI. Standards include requirements and/or recommendations in relation to products, systems, processes or services. Standards can also be used to describe a measurement or a test method or to establish a common terminology within a specific sector.
Powrmatic products have been tested to EN 12101-2. This standard covers products in the sector of smoke control. EN12101-2 covers Natural Smoke and Heat Exhaust Ventilators (N-SHEV’s).
Opensky AOV Louvred Smoke & Natural Ventilator
VersatileCompliantApprovedThe Opensky from Powrmatic
Our louvred Opensky is a natural and smoke ventilator perfect for comfort ventilation or as part of a N-SHEV (Natural, smoke and heat exhaust ventilation) system.
The Opensky is available in a range of dimensions, control operations and finishes making it suitable for a wide range of applications.
Opensky Product Benefits
BESPOKE SIZE VERTICAL OR HORIZONTAL OPTION
EN12101-2 TESTED VENTILATOR
BS-EN12101:2
2003
SMOKE VENTILATION SYSTEM
WEATHER PROOF
8
Opensky AOV Louvred Smoke & Natural Ventilator
FinishThe Opensky is available in an extensive range of finishes. The blades are available in un-insulated aluminum, insulated aluminum and polycarbonate. Furthermore, the finish can either be single skin aluminum finish or PPC to any RAL/BS and finish. This allows the Opensky to suit varied applications whilst not compromising on aesthetics.
Approvals The opensky has been tested to EN 12101-2 in a wide variety from sizes from 870mm length (vent size) 500mm width (vent size) to 3470mm length (vent size) to 2000mm width (vent size). In addition, the Opensky base is not standard and can be tailored order to suit any size required. Offering you full control over your smoke ventilator.
ProductFeatures
Vertical or Horizontal OptionsThe Opensky can be installed vertically or horizontal allowing it to be installed either as a head of a smoke shaft or a corridor ventilator. In addition it can be controlled either electrically, pneumatically or manually enhancing its versatility to suit any application needed.
N-SHEVThe Opensky is an economical option to ensure safety in case of a fire emergency. It can be used as part of a Smoke and Heat Exhaust Ventilation System (SHEV) or/and comfort ventilation.
Easy Installation & ServicingThe option of demountable blades offers you easier access to the actuators from the outside making already a low-maintenance smoke ventilator effortless to service. The product is delivered to the client already pre-assembled saving time and cost on site.
9
Roof OpenskyGeneric Drawing
OVERALL BASE WIDTH
OVERALL BASE LENGTH
VENT LENGTHBASE BASE
BASE VENT WIDTH BASE
ACTUATOR - DRIVE OPEN / DRIVE CLOSED24V dc, 0.8A, POLARITY REVERSAL
15 CLEARANCEOUTSIDE DIMENSION OF UPSTAND
15 CLEARANCE
VENT THROAT / MIN INSIDE DIMENSION OFUPSTAND
FOR ANY SLOPE ON UPSTAND, HEAD MUST BEPOSITIONED UPSLOPE, OPERATION AT HEAD
15 CLEARANCEOUTSIDE DIMENSION OF UPSTAND
VENT THROAT / MIN INSIDE DIMENSION OF UPSTAND
UNINSULATED ALUMINIUMBLADES
15 CLEARANCE
250
POLYCARBONATE BLADESINSULATED ALUMINIUMBLADES
(std 110) (std 110)
50B
AS
ESECTION THROUGH VENT LENGTH
(std 110)(std 110)
insulatedbody
uninsulatedbody
INSULATED BLADES UNINSULATED BLADESPOLYCARBONATE BLADES
SECTION THROUGH VENT WIDTH
KEY PLAN
'B'
'A'
'B'
PLACE VENT BASE ON TOCONTINUOUS MASTIC BEAD& FIX WITH BUILDEX N°12 x 25LONG STITCHING SCREWS@ APPROX 300 CENTRES
'A'
Powrmatic Ltd. Hortbridge, Ilminster. Somerset. TA19 9PS.Tel: 01460 53535 Fax: 01460 52341Web: www.powrmatic.co.uk E mail: r&d@powrmatic .co.uk
POWRMATIC LTD
This drawing is copyright and the property of POWRMATICLIMITED. It must not be used without their knowledge, norcommunicted to any other person or company.
DRG NO:
PROJECTION:
TITLE:
MODIFICATIONSNEW DRAWING A
ISSUE--DCR DATEI/A NoDRN
UNSPEC. TOLS.Hole centers ±0.25mmGeneral ±0.5mmFinished sizes ±1.0mm
UNITS:
MM
APPROVED BY:
DO NOT SCALEITEM PART NUMBER QTY
- -1.DESCRIPTION
-MATERIAL GAUGE AND SPEC
-
OVERALL BASE WIDTH
OVERALL BASE LENGTH
VENT LENGTHBASE BASE
BASE VENT WIDTH BASE
ACTUATOR - DRIVE OPEN / DRIVE CLOSED24V dc, 0.8A, POLARITY REVERSAL
15 CLEARANCEOUTSIDE DIMENSION OF UPSTAND
15 CLEARANCE
VENT THROAT / MIN INSIDE DIMENSION OFUPSTAND
FOR ANY SLOPE ON UPSTAND, HEAD MUST BEPOSITIONED UPSLOPE, OPERATION AT HEAD
15 CLEARANCEOUTSIDE DIMENSION OF UPSTAND
VENT THROAT / MIN INSIDE DIMENSION OF UPSTAND
UNINSULATED ALUMINIUMBLADES
15 CLEARANCE
250
POLYCARBONATE BLADESINSULATED ALUMINIUMBLADES
(std 110) (std 110)
50B
AS
ESECTION THROUGH VENT LENGTH
(std 110)(std 110)
insulatedbody
uninsulatedbody
INSULATED BLADES UNINSULATED BLADESPOLYCARBONATE BLADES
SECTION THROUGH VENT WIDTH
KEY PLAN
'B'
'A'
'B'
PLACE VENT BASE ON TOCONTINUOUS MASTIC BEAD& FIX WITH BUILDEX N°12 x 25LONG STITCHING SCREWS@ APPROX 300 CENTRES
'A'
Powrmatic Ltd. Hortbridge, Ilminster. Somerset. TA19 9PS.Tel: 01460 53535 Fax: 01460 52341Web: www.powrmatic.co.uk E mail: r&d@powrmatic .co.uk
POWRMATIC LTD
This drawing is copyright and the property of POWRMATICLIMITED. It must not be used without their knowledge, norcommunicted to any other person or company.
DRG NO:
PROJECTION:
TITLE:
MODIFICATIONSNEW DRAWING A
ISSUE--DCR DATEI/A NoDRN
UNSPEC. TOLS.Hole centers ±0.25mmGeneral ±0.5mmFinished sizes ±1.0mm
UNITS:
MM
APPROVED BY:
DO NOT SCALEITEM PART NUMBER QTY
- -1.DESCRIPTION
-MATERIAL GAUGE AND SPEC
-
10
Wall OpenskyGeneric Drawing
SECTION A -A
15
VENT DEPTHBLADEOPEN
15
VE
NT
HE
IGH
T
LINEAR DRIVEACTUATORDRIVE OPEN/CLOSEDBY POLARITY REVERSAL,FUSIBLE LINK 72°C
AP
ER
TUR
E H
EIG
HT
250110
UN
INS
ULA
TED
ALU
MIN
IUM
BLA
DE
SP
OLY
CA
RB
ON
ATE
BLA
DE
SIN
SU
LATE
D A
LUM
INIU
MB
LAD
ES
SECTION B - B
15 WIDTH OF VENTAPERTURE WIDTH
15
DRIVE OPEN / DRIVE CLOSED24V dc, 0.8A, POLARITY REVERSAL
15
INSULATED BLADES UNINSULATED BLADESPOLYCARBONATE BLADES
VIEW ON FRONT ELEVATION
A
A
BB
Powrmatic Ltd. Winterhay Lane, Ilminster. Somerset.TA19 9PS. Tel: 01460 53535 Fax: 01460 52341Web: www.powrmatic.co.uk E mail: r&d@powrmatic .co.uk
POWRMATIC LTD
This drawing is copyright and the property of POWRMATICLIMITED. It must not be used without their knowledge, norcommunicted to any other person or company.
DRG NO:
-PROJECTION:
TITLE:
-
MODIFICATIONS ISSUEDCR DATEI/A NoDRN
UNSPEC. TOLS.Hole centers ±0.1mmGeneral ±0.1mmFinished sizes ±0.1mm
UNITS:
mm-
ITEM PART NUMBER QTY
- -1.DESCRIPTION
-
APPROVED BY:
DO NOT SCALEMATERIAL GAUGE AND SPEC
-- -- -- -
SECTION A -A
15
VENT DEPTHBLADEOPEN
15
VE
NT
HE
IGH
T
LINEAR DRIVEACTUATORDRIVE OPEN/CLOSEDBY POLARITY REVERSAL,FUSIBLE LINK 72°C
AP
ER
TUR
E H
EIG
HT
250110
UN
INS
ULA
TED
ALU
MIN
IUM
BLA
DE
SP
OLY
CA
RB
ON
ATE
BLA
DE
SIN
SU
LATE
D A
LUM
INIU
MB
LAD
ES
SECTION B - B
15 WIDTH OF VENTAPERTURE WIDTH
15
DRIVE OPEN / DRIVE CLOSED24V dc, 0.8A, POLARITY REVERSAL
15
INSULATED BLADES UNINSULATED BLADESPOLYCARBONATE BLADES
VIEW ON FRONT ELEVATION
A
A
BB
Powrmatic Ltd. Winterhay Lane, Ilminster. Somerset.TA19 9PS. Tel: 01460 53535 Fax: 01460 52341Web: www.powrmatic.co.uk E mail: r&d@powrmatic .co.uk
POWRMATIC LTD
This drawing is copyright and the property of POWRMATICLIMITED. It must not be used without their knowledge, norcommunicted to any other person or company.
DRG NO:
-PROJECTION:
TITLE:
-
MODIFICATIONS ISSUEDCR DATEI/A NoDRN
UNSPEC. TOLS.Hole centers ±0.1mmGeneral ±0.1mmFinished sizes ±0.1mm
UNITS:
mm-
ITEM PART NUMBER QTY
- -1.DESCRIPTION
-
APPROVED BY:
DO NOT SCALEMATERIAL GAUGE AND SPEC
-- -- -- -
SECTION A -A
15
VENT DEPTHBLADEOPEN
15
VE
NT
HE
IGH
T
LINEAR DRIVEACTUATORDRIVE OPEN/CLOSEDBY POLARITY REVERSAL,FUSIBLE LINK 72°C
AP
ER
TUR
E H
EIG
HT
250110
UN
INS
ULA
TED
ALU
MIN
IUM
BLA
DE
SP
OLY
CA
RB
ON
ATE
BLA
DE
SIN
SU
LATE
D A
LUM
INIU
MB
LAD
ES
SECTION B - B
15 WIDTH OF VENTAPERTURE WIDTH
15
DRIVE OPEN / DRIVE CLOSED24V dc, 0.8A, POLARITY REVERSAL
15
INSULATED BLADES UNINSULATED BLADESPOLYCARBONATE BLADES
VIEW ON FRONT ELEVATION
A
A
BB
Powrmatic Ltd. Winterhay Lane, Ilminster. Somerset.TA19 9PS. Tel: 01460 53535 Fax: 01460 52341Web: www.powrmatic.co.uk E mail: r&d@powrmatic .co.uk
POWRMATIC LTD
This drawing is copyright and the property of POWRMATICLIMITED. It must not be used without their knowledge, norcommunicted to any other person or company.
DRG NO:
-PROJECTION:
TITLE:
-
MODIFICATIONS ISSUEDCR DATEI/A NoDRN
UNSPEC. TOLS.Hole centers ±0.1mmGeneral ±0.1mmFinished sizes ±0.1mm
UNITS:
mm-
ITEM PART NUMBER QTY
- -1.DESCRIPTION
-
APPROVED BY:
DO NOT SCALEMATERIAL GAUGE AND SPEC
-- -- -- -
11
Example Free AreasRoof Opensky
Blade code Throat Length (mm) Vent Length (mm) Throat Width (mm) Vent Width (mm)
06 1290 1470 1210 1300
Insulated aluminium blades achieves 1m² Approved Document B free area
Approved document B free area
Width starts at throat size 410mm, Vent size 500mm it goes up in increments of 100mm to max throat size 1910mm and max vent size of 2000mm.
Length starts at throat size 690mm, Vent size 870mm it goes up in increments of 200mm to max throat size 3290mm and max vent size of 3470mm.
A range of sizes are available to meet the 1.0m² and 1.5m² minimum free area requirements. Please contact us for more information relating to the application or specification of these products.
Example illustrated below has a free area of 1m² Approved Document B
1520 OVERALL BASE WIDTH
1490 OVERALL BASE LENGTH
1270 VENT LENGTH110 110
110 1300 VENT WIDTH 110
DRIVE OPEN / DRIVE CLOSED24V dc, 0.8A, POLARITY REVERSAL
151460 MAXIMUM OUTSIDE DIMENSION OF UPSTAND15
1090 THROAT OF VENT / MINIMUM INSIDE OF UPSTAND
WEATHERPROOFSTITCHING SCREWS
MASTIC SEAL
FOR ANY SLOPE ON UPSTAND, HEADMUST BE POSITIONED UPSLOPE
151490 MAXIMUM OUTSIDE DIMENSION OF UPSTAND
1210 THROAT OF VENT / MINIMUM INSIDE OF UPSTAND
INSULATED ALUMINIUM BLADES
15
250
100
KEY PLAN
'B'
'A'
'B'
PLACE VENT BASE ON TOCONTINUOUS MASTIC BEAD& FIX WITH BUILDEX N°12 x 25LONG STITCHING SCREWS@ APPROX 300 CENTRES
'A'
Powrmatic Ltd. Hortbridge, Ilminster. Somerset. TA19 9PS.Tel: 01460 53535 Fax: 01460 52341Web: www.powrmatic.co.uk E mail: r&d@powrmatic .co.uk
POWRMATIC LTD
This drawing is copyright and the property of POWRMATICLIMITED. It must not be used without their knowledge, norcommunicted to any other person or company.
DRG NO:
OSREN0613/T/Q/IA/IAPROJECTION:
TITLE:
POWRMATIC ROOF OPEN
MODIFICATIONSNEW DRAWING A
ISSUEKH --
DCR DATE 16.04.14
I/A NoDRN
UNSPEC. TOLS.Hole centers ±0.25mmGeneral ±0.5mmFinished sizes ±1.0mm
UNITS:
MM SKY OVERALL DETAILS
APPROVED BY:
DO NOT SCALEITEM PART NUMBER QTY
- -1.DESCRIPTION
-MATERIAL GAUGE AND SPEC
-
ROOF OPEN SKY VENT, OSREN0613DRIVE OPEN / DRIVE CLOSED24V dc, 0.8A, POLARITY REVERSALTHIS VENT HAS BEEN TESTED TO BS EN 12101 Pt 2MILL FINISH INSULATED ALUMINIUMFREE AREA = 1.32m²AERODYNAMIC FREE AREA = 0.92m²FREE AREA to Approved Document B = 1.04m²WEIGHT 31.5
Roof Application
12
Example Free AreasWall Opensky
Blade code Throat Length (mm) Vent Length (mm) Throat Width (mm) Vent Width (mm)
06 1290 1470 1210 1300
Insulated aluminium blades achieves 1m² Approved Document B free area
Width starts at throat size 410mm, Vent size 500mm it goes up in increments of 100mm to max throat size 1910mm and max vent size of 2000mm.
Length starts at throat size 690mm, Vent size 870mm it goes up in increments of 200mm to max throat size 3290mm and max vent size of 3470mm.
A range of sizes are available to meet the 1.0m² and 1.5m² minimum free area requirements. Please contact us for more information relating to the application or specification of these products.
Furthermore, the wall Opensky can be provided with a rear or front fixing flange to allow you more control over the installation of your vent.
Example illustrated below 1.5m² ADB Un-Insulated aluminium blades and body
Blade code Aperture Height (mm) Vent Height (mm) Aperture Width (mm) Vent Width (mm)
07 1500 1470 1430 1400
SECTION B - B
151400 - WIDTH OF VENT
1430 - APERTURE WIDTH
DRIVE OPEN / DRIVE CLOSED24V dc, 0.8A, POLARITY REVERSAL
15
SECTION A -A
15
VENT DEPTHBLADE OPEN
15
1470
VE
NT
HE
IGH
T
LINEAR DRIVEACTUATORDRIVE OPEN/CLOSEDBY POLARITY REVERSAL,FUSIBLE LINK 72°C
1500
AP
ER
TUR
E H
EIG
HT
250110
ALU
MIN
IUM
SIN
GLE
SK
IN B
LAD
ES
15
BY OTHERSSILICONE SEALANT
PACKING BY OTHERS
BUILDEX TEKS SCREWS ORM8 BOLTS , NUTS & WASHERSFIXING TO TRIMMERS , EXISTINGSTEELWORK OR INTO BLOCKWORK
DOWN VENT JAMBS(BY OTHERS.)
15
PACKINGBY OTHERS
SILICONESEALANTBY OTHERS.
DETAIL ON HEAD
15DRAIN HOLES TOFRONT FACE
NO FIXINGS IN CILL
SILICONE SEALANT DETAIL ON HEAD
VIEW ON FRONT ELEVATION
1400
1470
A
A
BB
Powrmatic Ltd. Winterhay Lane, Ilminster. Somerset.TA19 9PS. Tel: 01460 53535 Fax: 01460 52341Web: www.powrmatic.co.uk E mail: r&d@powrmatic .co.uk
POWRMATIC LTD
This drawing is copyright and the property of POWRMATICLIMITED. It must not be used without their knowledge, norcommunicted to any other person or company.
DRG NO:
OSWEN0714/Q/ UA/ UAPROJECTION:
TITLE:
POWRMATIC WALL OPEN SKY.
MODIFICATIONS ISSUEDCR DATEI/A NoDRN
UNSPEC. TOLS.Hole centers ±0.1mmGeneral ±0.1mmFinished sizes ±0.1mm
UNITS:
mmOVERALL TYPICAL DETAILS
ITEM PART NUMBER QTY
- -1.DESCRIPTION
-
APPROVED BY:
DO NOT SCALEMATERIAL GAUGE AND SPEC
-NEW DRAWING 1AS -- 11/10/16
OSWEN0714/Q/UA/UADRIVE OPEN / DRIVE CLOSED,24V dc 0.8A POLARITY REVERSAL.TESTED TO EN BS 12101 Pt 2SINGLE SKIN ALUMINIUMBLADES AND BODY.GEOMETRIC FREE AREA = 1.73m²AERODYNAMIC FREE AREA = 1.17m²FREE AREA TO APPROVED DOC B = 1.58m²APPROX. O/A WEIGHT = 29.5 kg.
Approved document B free area
Wall Application
13
Opensky Installations
14
OpenskyInstallations
15
About UsPowrmatic design, develop and deliver HVAC solutions worldwide across a wide range of commercial and
industrial applications creating comfortable and safe environments, differentiated through innovation, integrity, compliance and service.
Our specialised HVAC divisions:
Industrial and commercial warm air and radiant space heating
solutions manufactured to achieve efficient performance, compliance and reliability for
every application in partnership with the HVAC trade.
Custom designed highly efficient, cost-effective smoke,
natural and powered ventilators manufactured to meet project
requirements of building operators, architects, specifiers
and contractors.
Worldwide distributors of innovative wall mounted heat
pumps air conditioner technology providing efficient comfort cooling
and heating all year round.
Bespoke heating and ventilation solutions designed to serve
individual customers specific project requirements. In addition
our OEM products provide partner AHU manufacturers with high quality energy efficient gas
fired heat exchangers.
Heating Ventilation Air Conditioning Engineered Products
Contact UsPowrmatic LimitedHort Bridge, IlminsterSomersetTA19 9PStel: +44 (0) 1460 53535fax: +44 (0) 1460 52341e-mail: [email protected]
Powrmatic Ireland45 Broomhill Close
TallaghtDublin 24
tel: +353 (0) 1452 1533 fax: +353 (0) 1452 1764
e-mail: [email protected]
#keepingthenationwarm
Powrmatic pursues a policy of continues improvement in both design and performance of its products and therefore reserves the right to change, amend or vary specifications without notice. Whilst the details contained herein are believed to be correct they do not form the basis of any contract and interested
parties should contact the Company to confirm whether any material alterations have been made since publication of this brochure.
EURO -A IRQUALIT YICOM
Ener gy Association
16Issue 1.0