National Science Foundation Graphene mediated self-assembly of fullerene nanotubes Krishna...
3
National Science Foundation Graphene mediated self-assembly of fullerene nanotubes Krishna Muralidharan, University of Arizona, DMR 1148936 Outcome : Researchers at the University of Arizona have developed strategies for fabricating hybrid carbon nanostructures consisting of self-assembled, mono-disperse fullerene (C 60 ) nanotubes (FNT) on single-layer graphene (SLG) sheets. The SLG surface mediates the self-assembly of C 60 molecules, leading to porous, mechanically-tough highly-oriented FNT structures. This is the first time that such structures have been self-assembled on SLG or any other substrate. Impact : These hybrid-materials are expected to have a wide range of applications including (i) field-emitters, (ii) high surface area hydrogen storage media, (iii) light- weight battery and ultracapacitor electrodes. Explanation : The self-assembly of C 60 on SLG is reported for the first time and demonstrates a remarkably simple method involving dip-coating to self-assemble micron-long, Illustration of an FNT: The building-blocks of the FNT are single C 60 molecules with intermolecular spacing ~ 1nm
-
Upload
britton-kelly -
Category
Documents
-
view
217 -
download
0
description
National Science Foundation CVD/Molecular deposition Chemical Process Center Teri Elwood, an Honors freshman student won 1st prize in The Honors College 3rd Annual First Year Project Showcase at the University of Arizona. Her project: “Graphene: Finding the Perfect Recipe” was co-supervised by PI: Prof. Muralidharan and was performed at the Center. Modular chemical-process center: research and outreach Krishna Muralidharan, University of Arizona, DMR This equipment was constructed using funding from this grant for the purposes of synthesizing the hybrid material-systems. A graduate student as well as an undergraduate were involved in the design and construction of this apparatus. The center was part of an outreach effort to help in educating incoming freshman about Materials Science and Engineering.
Transcript of National Science Foundation Graphene mediated self-assembly of fullerene nanotubes Krishna...
Nat
iona
l Sci
ence
Fou
ndat
ion
Nat
iona
l Sci
ence
Fou
ndat
ion Graphene mediated self-assembly of fullerene
nanotubesKrishna Muralidharan, University of Arizona, DMR 1148936
Outcome: Researchers at the University of Arizona have developed strategies for fabricating hybrid carbon nanostructures consisting of self-assembled, mono-disperse fullerene (C60) nanotubes (FNT) on single-layer graphene (SLG) sheets. The SLG surface mediates the self-assembly of C60 molecules, leading to porous, mechanically-tough highly-oriented FNT structures. This is the first time that such structures have been self-assembled on SLG or any other substrate.
Impact: These hybrid-materials are expected to have a wide range of applications including (i) field-emitters, (ii) high surface area hydrogen storage media, (iii) light-weight battery and ultracapacitor electrodes.Explanation: The self-assembly of C60 on SLG is reported for the first time and demonstrates a remarkably simple method involving dip-coating to self-assemble micron-long, mesoporous, electrically conductive tubes that have very high strength-to-weight ratios. The self-assembly is driven by the nano-periodic strain-field associated with SLG grown on copper foils. The surface coverage and dimensions of FNT are also determined by the solution-concentration used in the dip-coating.
Illustration of an FNT:The building-blocks of the FNT are single C60 molecules with intermolecular spacing ~ 1nm
Nat
iona
l Sci
ence
Fou
ndat
ion
Nat
iona
l Sci
ence
Fou
ndat
ion
An SEM image (LEFT) and an AFM image (BELOW) of the self-assembled FNT on SLG/Cu. Note that neighboring FNT are oriented at angles that are multiples of 30°. This is a consequence of the underlying hexagonal symmetry coupled with FCC packing of C60 molecules in the FNT.
Experimental synthesis: single layer graphene (SLG) is grown by chemical vapor deposition on a Cu-foil, followed by a dip-coating step. Here, the SLG/Cu is immersed in C60 dispersed in a toluene-solution. A scanning electron microscope (SEM) image of the self-assembled fullerene nanotubes (FNT) is shown in the figure below. The figure clearly demonstrates the mono-disperse nature of the self-assembled FNT. Note that self-assembly was not observed on plain Cu-foils or other substrates such as SiO2 or silicon, confirming the role of SLG on self-assembly.
Graphene mediated self-assembly of fullerene nanotubes
Krishna Muralidharan, University of Arizona, DMR 1148936
Nat
iona
l Sci
ence
Fou
ndat
ion
Nat
iona
l Sci
ence
Fou
ndat
ion
CVD/Molecular deposition Chemical Process Center
Teri Elwood, an Honors freshman student won 1st prize in The Honors College 3rd Annual First Year Project Showcase at the University of Arizona. Her project: “Graphene: Finding the Perfect Recipe” was co-supervised by PI: Prof. Muralidharan and was performed at the Center.
Modular chemical-process center: research and outreach
Krishna Muralidharan, University of Arizona, DMR 1148936
This equipment was constructed using funding from this grant for the purposes of synthesizing the hybrid material-systems. A graduate student as well as an undergraduate were involved in the design and construction of this apparatus. The center was part of an outreach effort to help in educating incoming freshman about Materials Science and Engineering.
