nathan andrews resume

NATHAN CHARLES ANDREWS102 Galsworthy Street, Holland Park West, QLD, AUSTRALIA 4121

Mob: 0400710391 email: [email protected]

PROFESSIONAL ACHIEVEMENTS Successfully complete difficult wells and fully qualified derrickman

WORK EXPERIENCEEnsign International Energy ServicesJanuary 2014 to currentPosition-Derrickman (full-time)ADR200 rig 950,962,964,966

Key responsibilities: Maintain and manage different mud systems Mud building and treating Mud testing, weight, viscosity, water loss and PH Centrifuge and de-silter operation Mud pump maintenance and repair Assist crew in tripping operations including iron ruffneck and pipe arm Sumpless drilling Chemical handling and mixing Pump servicing and maintenance Loader operator with stinger attachment Rigging with chains and slings Winch line operation Mob and demob of down hole drilling tools Winch truck rigging and dogging

Atlas Drilling January 2012 to December 2013Position – Derrickman (Full-time)Rig - gefco 185 singleKey responsibilities:

Maintain and manage different mud systems Mud building and treating Mud testing, weight, viscosity, water loss and PH Centrifuge and de-silter operation Mud pump maintenance and repair Lead floorman-floor work running bha/drill string/casing Strap/preparation of drill strings and bha. Id’s, Od’s fishnecks thread identification Loader operator

1



Wireline operation-retrieving core barrels and seating or removing drill rod with over shot tool Pason entry. Pipe tally,string weights,grade,tour report Prestarts/fuel up plant and equipment,generators,rig,mud pump, vehicles Plant and equipment service and maintenance Drill fluid maintenance and monitoring. Mud mixing,mud weight,viscosity test People management-trainer/supervisor of subordinates Permit holder Stock takes of critical spares Bop/well head nipple up/down/ram dressing and replacement Mob/de mob of rig Job safety analysis Assistant to driller preparing all equipment is ready for next section of hole Strip down and dressing of mud pumps Winch line replacement Rigging and dogging Manual rig tongs and iron ruffneck operation

MB CENTURYAugust 2011 to October 2011 Position – Floorman (Contract)Rig - iddeco doubleRebuilding of this RigKey Responsibilities

Full strip down and rebuild of rig Sand blasting and spray painting Rebuild of mud pump and tanks Redress of derrick Crane rigging and dogging

ENSIGN INTERNATIONAL ENERGY SERVICESSeptember 2009 to June 2010Position-FloormanRig-kremco 600 doubleKey Responsibilities

drill fluid mixing and monitoring-mud weights and transfers rig operations-slip and cut, tripping pipe, running casing, BHA

2



maintenance and house keeping- pressure blasting, painting Storing chemicals- Loading and unloading trucks heavy machinery- driving cat loader, hydraulic skate, power tongs work efficiently to achieve shift goals pump maintenance- Replacing pony rods, swabs, valve seats, liners, demco valves pipe, hose and valve fitting shaker monitoring- replacing screens, clearing possum bellies crane rigging and dogging working at heights permit to work and job hazard analysis rig rebuild

TASMAN OIL TOOLSJuly 2009 to August 2009Position-service hand (contract)Key Responsibilities:

Service, redress and repair of jars and stabilizers Deburing slotted pipe Rabbiting and doping of drill pipe for hire General yard house keeping and assisting mechanics Crane rigging and dogging

WELLS INSTRUMENT & ELECTRICALJuly 2008 to April 2009Position-trade assistant (contract)Kupe gas production station project Key Responsibilities:

Assistant to electrician Cabling and mechanical support installation Installation and termination of plant lighting and junction boxes Working at height- elevated work platform Permit to work and job hazard analysis

ENERGY WORKSFebruary 2008 to May 2008

3



Position-trade assistant (contract)Taranaki power station gt 26 c inspection and rebuildMethanex motunui methanol plant start upKey Responsibilities:

Assistant to fitter welders Preparation of work site Hytorque operation Cleaning and reinstating of flanges, gaskets and bolts Crane rigging and dogging

TRANSFIELD SERVICESPosition-civil worker (contract)Key Responsibilities:

Installation of fibre optic telecommunications network Compressor and winch operation Traffic management Cable location and repair Cable jointing and splicing Excavator operation

HADEN AIR CONDITIONING & MECHANICAL ENGINEERINGJanuary 2011 to July 2011Position-skilled labourer (contract)Key Responsibilities:

Installation of fire protection systems Measure, cut and screw of pipe and fittings- variation to build plan Working at heights

EDUCATION / QUALIFICATIONS Cert 2 & 3 drilling oil/gas onshore

4



Loader ticket EWP ticket-cert 3 in mobile crane operations Working at heights Confined space entry Wellsite Permit to work Giq coal standard Arrow induction Santos induction 4wd cert Origin induction Ensign safety training course Rig and sling regular loads and communicate during crane operations First aid Fire fighting BA Dogman liscence

Electrical engineering unit standards15851-demonstrate electrical safety and safe working practices15852-isolate and test low voltage sub circuits25071- demonstrate knowledge of electromotive force15844-select and install flexible cords

SKILLS Work as a team and independently Attention to detail Mechanical and electrical experience Joinery, Carpentry and concrete experience Machinery operation Hand and power tool expertise Ability to learn new skills

REFERENCESTo be provided upon request

5



6



request7



8

nathan andrews resume

Documents

Transcript of nathan andrews resume