Name Home Assignments

ISO Update

Supplement to ISO Focus+

September 2010

People and places

ISO Members 2

International Standards in processfrom 6 July to 24 August 2010

Committee Drafts (CD) registered 3

Draft International Standards (DIS) circulated 5

Final draft International Standards (FDIS) circulated 10

Standards published 14

Standards confirmed 19

Standards withdrawn 22

Meeting calendar 23

People and places

2 ISO Update, Supplement to ISO Focus+– September 2010

ISO Members

Since the July/August 2010 issue of ISO Focus+, the following changes affecting ISO members have occurred:

Membership change

The membership status of the Association Sénégalaise de Normalisation (ASN) of Senegal has been upgraded from correspondent to member body as of 1 July 2010. Its contact details read as follows :

SENEGAL (ASN) Association Sénégalaise de Normalisation Ministère des Mines, de l'Industrie, de la transformation alimentaire des produits agricoles et des PME 21, Lotissement Front de Terre & Bourguiba Boîte postale 4037 DAKAR

Directeur Général: M. Barama Sarr

Tel. +221 33 827 64 01 Fax +221 33 827 64 12 E-Mail [email protected] Web www.asn.sn

Address change

Member bodies

JORDAN (JSMO) Jordan Standards and Metrology Organization (JSMO) Dabouq area #50 Khair Al-Din Al-Ma'ani St. AMMAN 11194 Postal address

P.O. box 941287 AMMAN 11194 Tel. +962 6 530 12 25 Fax +962 6 530 12 49 E-Mail [email protected] Web www.jsmo.gov.jo NIGERIA (SON) E-Mail [email protected]

Correspondent member

GEORGIA (GEOSTM) E-Mail [email protected]

International Standards in process

An International Standard is the result of an agreement between themember bodies of ISO. A first important step towards an InternationalStandard takes the form of a committee draft (CD) - this is circulatedfor study within an ISO technical committee. When consensus hasbeen reached within the technical committee, the document is sent tothe Central Secretariat for processing as a draft InternationalStandard (DIS). The DIS requires approval by at least 75 % of themember bodies casting a vote.

CD registered

Period from 06 July to 24 August 2010

These documents are currently under consideration in the technicalcommittee.

They have been registered at the Central Secretariat.

*Available in English only

TC 6 Paper, board and pulps

ISO/CD 2469 Paper, board and pulps – Measurement of diffuse radiance factor (Revision of ISO 2469:2007)

TC 8 Ships and marine technology

ISO/CD 3730 Shipbuilding – Mooring winches (Revision of ISO 3730:1988)

ISO/CD 7365 Shipbuilding and marine structures – Deck machinery – Towing winches for deep sea use (Revision of ISO 7365:1983)

TC 20 Aircraft and space vehicles

ISO/CD 11217 Aerospace – Hydraulic system fluid contamination – Location of sampling points and criteria for sampling (Revision of ISO 11217:1993)

ISO/CD 14200 Processed based implementation of meteoroid and debris environmental models (Orbital altitudes below GEO + 2000km)

TC 22 Road vehicles

ISO/CD 4106 Motorcycles – Engine test code – Net power (Revision of ISO 4106:2004)

ISO/CD 6550-3 Road vehicles – Sheath-type glow-plugs with conical seating and their cylinder head housing – Part 3: M10 glow-plugs (Revision of ISO 6550-3:2009)

ISO/CD 6621-5 Internal combustion engines – Piston rings – Part 5: Quality requirements (Revision of ISO 6621-5:2005)

ISO/CD 6623 Internal combustion engines – Piston rings – Scraper rings made of cast iron (Revision of ISO 6623:2004)

ISO/CD 12357-3

Road vehicles – Drawbar couplings and eyes for rigid drawbars – Part 3: Strength tests for multiple vehicle

ISO/CD 12405-2

Electrically propelled road vehicles – Test specification for lithium-Ion traction battery systems – Part 2: High energy applications

ISO/CD 13063 Electric mopeds and motorcycles - Electrical and operational safety

ISO/CD 13288 Passenger car road wheels - Biaxial Fatigue Test Method

ISO/CD 13296 Diesel engines – High-pressure fuel injection pipe assemblies – General requirements and dimensions (Revision of ISO 13296:2005)

ISO/CD 18669-1

Internal combustion engines – Piston pins – Part 1: General specifications (Revision of ISO 18669-1:2004)

ISO/CD 22241-5

Diesel engines – NOx Reduction agent AUS32 – Part 5: Refilling inteerface for passenger cars

ISO/CD 23274-2

Hybrid-electric road vehicles – Exhaust emissions and fuel consumption measurements – Part 2: Externally chargeable vehicles (Revision of ISO 23274:2007)

TC 23 Tractors and machinery for agriculture and forestry

ISO 3767-1:1998/CD Amd 2

Tractors, machinery for agriculture and forestry, powered lawn and garden equipment – Symbols for operator controls and other displays – Part 1: Common symbols – Amendment 2

TC 24 Particle characterization including sieving

ISO/CD 13322-1

Particle size analysis – Image analysis methods – Part 1: Static image analysis methods (Revision of ISO 13322-1:2004)

TC 27 Solid mineral fuels

ISO/CD 13605 Solid mineral fuel – Major and minor elements in hard coal ash and coke ash – Wavelength dispersive x-ray fluorescence spectrometric method

TC 38 Textiles

ISO 11092:1993/CD Amd 1

Textiles – Physiological effects – Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test) – Amendment 1

TC 61 Plastics

ISO/CD 7792-1 Plastics – Thermoplastic polyester (TP) moulding and extrusion materials – Part 1: Designation system and basis for specifications (Revision of ISO 7792-1:1997)

ISO/CD 7792-2 Plastics – Thermoplastic polyester (TP) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (Revision of ISO 7792-2:1997)

ISO Update, Supplement to ISO Focus -- September 2010 3

ISO/CD 9352 Plastics – Determination of resistance to wear by abrasive wheels (Revision of ISO 9352:1995)

ISO/CD 12817 Carbon-fibre-reinforced composites – Determination of open-hole compressive strength

TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries

ISO/CD 15551 Petroleum and natural gas industries - Downhole equipment - Electric submersible pumps

TC 68 Financial services

ISO/CD 16609 Banking – Requirements for message authentication using symmetric techniques (Revision of ISO 16609:2004)

TC 69 Applications of statistical methods

ISO/CD 3534-4 Statistics – Vocabulary and symbols – Part 4: Survey sampling

TC 86 Refrigeration and air-conditioning

ISO/CD 16358-1

Air-cooled air conditioners and air-to-air heat pumps - Testing and calculating methods for seasonal performance factors – Part 1: Cooling seasonal performance factor CSPF

ISO/CD 16358-2

Air-cooled air conditioners and air-to-air heat pumps - Testing and calculating methods for seasonal performance factors – Part 2: Heating seasonal performance factor HSPF

ISO/CD 16358-3

Air-cooled air conditioners and air-to-air heat pumps - Testing and calculating methods for seasonal performance factors – Part 3: Annual performance factor APF

TC 118 Compressors and pneumatic tools, machines and equipment

ISO/CD 3857-4 Compressors, pneumatic tools and machines – Vocabulary – Part 4: Air treatment

TC 130 Graphic technology

ISO/CD 12647-6

Graphic technology – Process control for the production of half-tone colour separations, proofs and production prints – Part 6: Flexographic printing

TC 131 Fluid power systems

ISO/CD 6162-2 Hydraulic fluid power – Flange connections with split or one-piece flange clamps and metric or inch screws – Part 2: Flange connectors, ports and mounting surfaces for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN 13 to DN 76 (Revision of ISO 6162-2:2002)

TC 138 Plastics pipes, fittings and valves for the transport of fluids

ISO/CD 8513 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes – Determination of longitudinal tensile properties

ISO/CD 13147 Plastics pipes and fittings Slow peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 50 mm

TC 147 Water quality

ISO/CD 16191 Water quality - Determination of the toxic effect of sediment and soil on the growth behaviour of Myriophyllum aquaticum - Myriophyllum test

TC 150 Implants for surgery

ISO/CD 14708-1

Implants for surgery – Active implantable medical devices – Part 1: General requirements for safety, marking and for information to be provided by the manufacturer (Revision of ISO 14708-1:2000)

TC 156 Corrosion of metals and alloys

ISO/CD 21608 Corrosion of metals and alloys – Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials

TC 157 Non-systemic contraceptives and STI barrier prophylactics

ISO/CD 29943-1

Condoms – Guidance on clinical studies – Part 1: General consideration for studies based on self-reports

TC 189 Ceramic tile

ISO/CD 10545-9

Ceramic tiles – Part 9: Determination of resistance to thermal shock (Revision of ISO 10545-9:2004)

ISO/CD 13006 Ceramic tiles – Definitions, classification, characteristics and marking (Revision of ISO 13006:1998)

TC 199 Safety of machinery

ISO/CD 13856-1

Safety of machinery – Pressure-sensitive protective devices – Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (Revision of ISO 13856-1:2001)

TC 202 Microbeam analysis

ISO/CD 15632 Microbeam analysis – Instrumental specification for energy dispersive X-ray spectrometers with semiconductor detectors (Revision of ISO 15632:2002)

TC 204 Intelligent transport systems

ISO/DTS 13140-2

Electronic fee collection – Evaluation of on-board and roadside equipment for conformity to ISO/TS 13141 – Part 2: Abstract test suite

ISO/CD 21214 Intelligent transport systems – Communications access for land mobiles (CALM) – Infra-red systems (Revision of ISO 21214:2006)

TC 211 Geographic information/Geomatics

ISO/CD 19157 Geographic information – Data quality (Revision of ISO 19113:2002, ISO 19114:2003, ISO/TS 19138:2006)

ISO/DTS 19158 * Geographic information - Quality assurance of data supply

TC 215 Health informatics

ISO/DTR 13128 Health Informatics – Clinical document registry federation

ISO/CD 13940-2

Health informatics – System of concepts to support continuity in care – Part 2: Healthcare process and workflow

TC 223 Societal Security

ISO/DTR 22312 Societal Security – Technological Capabilities

4 ISO Update, Supplement to ISO Focus - September 2010

DIS circulated

Period from 06 July to 24 August 2010These documents have obtained substantial support within theappropriate ISO technical committeeThey have been submitted to the ISO member bodies for voting bythe date shown*Available in English only

TC 228 Tourism and related services

ISO/CD 13293 Recreational diving services – Requirements for gas blender training programmes

TC 244 Industrial furnaces and associated thermal processing equipment

ISO/CD 13577 Industrial furnace and associated thermal processing equipement – General safety requirements

ISO/CD 13579-1

Industrial furnaces and associated thermal processing equipment – Method of measuring energy balance and calculating efficiency – Part 1: General methodology

ISO/CD 13579-2

Industrial furnaces and associated thermal processing equipment – Method of measuring energy balance and calculating efficiency – Part 2: Reheating furnace for steel

ISO/CD 13579-3

Industrial furnaces and associated thermal processing equipment – Method of measuring energy balance and calculating efficiency – Part 3: Batch type aluminium melting furnace

ISO/CD 13579-4

Industrial furnaces and associated thermal processing equipment – Method of measuring energy balance and calculating efficiency – Part 4: Controlled atmosphere furnace

TMB Technical Management Board

ISO/IEC CD 80079-36

Explosive atmospheres – Part 36: Non-electrical equipment for use in explosive atmospheres – Basic methods and requirements

CASCO Committee on conformity assessment

ISO/IEC CD 17024

Conformity assessment – General requirements for bodies operating certification of persons (Revision of ISO/IEC 17024:2003)

JTC 1 Information technology

ISO/IEC CD 15026-3

Information technology – System and software integrity levels – Part 3: (Revision of ISO/IEC 15026:1998)

ISO/IEC CD 25063

Systems and software engineering - System and software product Quality Requirements and Evaluation (SQuaRE) - Common industry Format for Usability: Context of use description

ISO/IEC CD 25064

System and software product Quality Requirements and Evaluation (SQuaRE) - Common industry Format for Usability: User needs report

ISO/IEC CD 26515

* Software and systems engineering - IT Performance Benchmarking Framework

ISO/IEC DTR 29154

* Guide for the application of ISO/IEC 24773 – Certification of Software Engineering Professionals

Voteterminates

TC 4 Rolling bearings

ISO/DIS 12297 Rolling bearings – Steel cylindrical rollers – Dimensions and tolerances

2011-01-14

TC 5 Ferrous metal pipes and metallic fittings

ISO/DIS 13470 Trenchless applications of ductile iron pipes systems – Product design and installation

2010-12-23


ISO/DIS 21070 * Ships and marine technology – Marine environmental protection – Management and handling of shipboard garbage

2011-01-17

ISO/DIS 28002 * Security management systems for the supply chain – Development of resilience in the supply chain – Requirements with guidance for use (Revision of ISO/PAS 28002)

2010-12-24

TC 10 Technical product documentation

ISO/DIS 10628-2

Diagrams for the chemical and petrochemical industry – Part 2: Graphical symbols (Revision of ISO 10628:1997)

2010-12-16


ISO/DIS 10795 * Space systems – Programme management – Vocabulary

2010-12-14

ISO/DIS 11076 Aircraft – De-icing/anti-icing methods on the ground (Revision of ISO 11076:2006)

2010-12-28

ISO/DIS 11218.3

* Aerospace – Cleanliness classification for aeronautical fluids (Revision of ISO 11218:1993)

2010-10-12

TC 21 Equipment for fire protection and fire fighting

ISO/DIS 7240-11

* Fire detection and alarm systems – Part 11: Manual call points (Revision of ISO 7240-11:2005, ISO 7240-11:2005/Amd 1:2009)

2010-12-23

TC 22 Road vehicles

ISO/DIS 6469-3.2

* Electrically propelled road vehicles – Safety specification – Part 3: Protection of persons against electric shock (Revision of ISO 6469-3:2001, ISO 6469-3:2001/Cor 1:2003)

2010-09-24


ISO/DIS 6855-1 * Mopeds – Measurement method for gaseous exhaust emissions and fuel consumption – Part 1: General test requirements (Revision of ISO 6855:1983)

2011-01-20

ISO/DIS 6855-2 * Mopeds – Measurement method for gaseous exhaust emissions and fuel consumption – Part 2: Test cycles and specific test conditions (Revision of ISO 6855:1983)

2011-01-20

ISO/DIS 6855-3 * Mopeds – Measurement method for gaseous exhaust emissions and fuel consumption – Part 3: Fuel consumption measurement at a constant speed (Revision of ISO 6855:1983)

2011-01-20

ISO/DIS 13044-1

* Road vehicles – Fully automatic coupling systems 24 V (FACS) for heavy commercial vehicle combinations – Part 1: General requirements and definitions

2011-01-24

ISO/DIS 13064-1

* Battery-electric mopeds and motorcycles – Performance – Part 1: Reference energy consumption and range

2011-01-24

ISO/DIS 13064-2

* Battery-electric mopeds and motorcycles – Performance – Part 2: Road operating characterictics

2011-01-24

ISO/DIS 13209-1

* Road vehicles – Open Test sequence eXchange format (OTX) – Part 1: General information and use cases

2010-12-14

ISO/DIS 27145-3

* Road vehicles – Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements – Part 3: Common message dictionary (Revision of ISO/PAS 27145-3:2006)

2010-12-20


ISO/DIS 15081 * Agricultural equipment – Graphical symbols for pressurized irrigation systems (Revision of ISO 15081:2005)

2011-01-24

ISO/DIS 17101-1

* Agricultural machinery – Thrown-object test and acceptance criteria – Part 1: Rotary mowers (Revision of ISO 17101:2004)

2011-01-24

ISO/DIS 17101-2

* Agricultural machinery – Thrown-object test and acceptance criteria – Part 2: Flail mowers (Revision of ISO 17101:2004)

2011-01-24

TC 28 Petroleum products and lubricants

ISO/DIS 12152 * Lubricants, industrial oils and related products – Determination of the foaming and air release properties of industrial gear oils using a spur gear test rig – Flender foam test procedure

2010-12-14

TC 29 Small tools

ISO/DIS 9361-2 Indexable inserts for cutting tools – Ceramic inserts with rounded corners – Part 2: Dimensions of inserts with cylindrical fixing hole (Revision of ISO 9361-2:1991)

2010-12-08

TC 31 Tyres, rims and valves

ISO/DIS 5775-1 Bicycle tyres and rims – Part 1: Tyre designations and dimensions (Revision of ISO 5775-1:1997)

2010-12-13

TC 34 Food products

ISO 6887-4:2003/DAmd 1

Microbiology of food and animal feeding stuffs – Preparation of test samples, initial suspension and decimal dilutions for microbiological examination – Part 4: Specific rules for the preparation of products other than milk and milk products, meat and meat products, and fish and fishery products – Amendment 1

2010-12-16

ISO/DIS 7970 Wheat (Triticum aestivum L.) – Specification (Revision of ISO 7970:2000)

2010-12-29

ISO/DIS 13082 * Milk and milk products – Determination of the lipase activity of pregastric lipase preparation

2010-12-13

ISO/DIS 17932 Vegetable oils – Determination of the deterioration of bleachability index (DOBI) and carotene content (Revision of ISO 17932:2005)

2010-12-16

TC 35 Paints and varnishes

ISO/DIS 20566 Paints and varnishes – Determination of the scratch resistance of a coating system using a laboratory-scale car-wash (Revision of ISO 20566:2005)

2010-12-30

TC 37 Terminology and other language and content resources

ISO/DIS 24617-2

* Language resource management – Semantic annotation framework (SemAF) – Part 2: Dialogue acts

2010-12-31

TC 44 Welding and allied processes

ISO/DIS 10225.2

Gas welding equipment – Marking for equipment used for gas welding, cutting and allied processes

2010-09-11

ISO/DIS 15615 Gas welding equipment – Acetylene manifold systems for welding, cutting and allied processes – Safety requirements in high-pressure devices (Revision of ISO 15615:2002)

2011-01-06

TC 45 Rubber and rubber products

ISO 1125:1999/DAmd 1

Rubber compounding ingredients – Carbon black – Determination of ash – Amendment 1

2010-12-13

ISO/DIS 6072 Rubber – Compatibility between hydraulic fluids and standard elastomeric materials (Revision of ISO 6072:2002)

2010-12-31

TC 46 Information and documentation

ISO/DIS 16175-2.2

* Information and documentation – Principles and functional requirements for records in electronic office environments – Part 2: Guidelines and functional requirements for records in electronic office environments

2010-10-17


TC 59 Buildings and civil engineering works

ISO/DIS 9836 * Performance standards in building – Definition and calculation of area and space indicators (Revision of ISO 9836:1992)

2011-01-03

ISO/DIS 15686-2

Buildings and constructed assets – Service life planning – Part 2: Service life prediction procedures (Revision of ISO 15686-2:2001)

2010-12-21

TC 61 Plastics

ISO/DIS 3598 Textile glass – Yarns – Basis for a specification (Revision of ISO 3598:1986)

2010-12-20

ISO 14898:1999/DAmd 1

* Plastics – Aromatic isocyanates for use in the production of polyurethane – Determination of acidity – Amendment 1

2011-01-13

ISO/DIS 26842-1

* Adhesives – Test methods for the evaluation and selection of adhesives for indoor wood products – Part 1: Resistance to delamination in non-severe environments (Revision of ISO 26842-1:2009)

2011-01-17

ISO/DIS 26842-2

* Adhesives – Test methods for the evaluation and selection of adhesives for indoor wood products – Part 2: Resistance to delamination in severe environments (Revision of ISO 26842-2:2009)

2011-01-17

ISO/DIS 30012 * Carbon-fibre-reinforced plastics – Determination of the size and aspect ratio of crushed objects

2011-01-11


ISO/DIS 12211 * Petroleum, petrochemical and natural gas industries – Spiral plate heat exchangers

2010-12-09

ISO/DIS 13679.2

Petroleum and natural gas industries – Procedures for testing casing and tubing connections (Revision of ISO 13679:2002)

2010-12-01

ISO/DIS 15589-2

* Petroleum and natural gas industries – Cathodic protection of pipeline transportation systems – Part 2: Offshore pipelines (Revision of ISO 15589-2:2004)

2011-01-24

ISO 21809-3:2008/DAmd 1

* Petroleum and natural gas industries – External coatings for buried or submerged pipelines used in pipeline transportation systems – Part 3: Field joint coatings – Amendment 1

2010-12-07


ISO 2859-1:1999/DAmd 1

Sampling procedures for inspection by attributes – Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection – Amendment 1

2011-01-07

ISO/DIS 7870-3 * Control charts – Part 3: Acceptance control charts (Revision of ISO 7966:1993)

2011-01-12

TC 85 Nuclear energy

ISO/DIS 11665-8

* Measurement of radioactivity in the environment – Air – Part 8: Radon-222 in buildings: Methodologies for initial and additional investigations

2010-12-17

TC 92 Fire safety

ISO/DIS 5660-4 * Reaction to fire tests – Heat release, smoke production and mass loss rate – Part 4: Measurement of heat release for determination of low levels of combustibility

2011-01-12

TC 94 Personal safety – Protective clothing and equipment

ISO/DIS 20471 High-visibility warning clothing for professional use – Test methods and requirements

2011-01-13

TC 104 Freight containers

ISO/DIS 18186 * Freight containers – RFID cargo shipment tag system (Revision of ISO/PAS 18186:2010)

2010-12-23

TC 106 Dentistry

ISO/DIS 9693-1 Dentistry – Compatibility testing – Part 1: Metal-ceramic systems (Revision of ISO 9693:1999, ISO 9693:1999/Amd 1:2005)

2010-12-09

TC 107 Metallic and other inorganic coatings

ISO/DIS 13123 Metallic and other inorganic coatings – Test method of cyclic heating for thermal-barrier coatings under temperature gradient

2010-12-23

TC 117 Fans

ISO 12499:1999/DAmd 1

Industrial fans – Mechanical safety of fans – Guarding – Amendment 1

2011-01-20

TC 118 Compressors and pneumatic tools, machines and equipment

ISO/DIS 28927-12

Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 12: Die grinders (Revision of ISO 8662-13:1997, ISO 8662-13:1997/Cor 1:1998)

2011-01-06

TC 122 Packaging

ISO/DIS 3394 * Packaging – Complete, filled transport packages and unit loads – Dimensions of rigid rectangular packages (Revision of ISO 3394:1984)

2010-12-17

ISO/DIS 3676 * Packaging – Complete, filled transport packages and unit loads – Unit load dimensions (Revision of ISO 3676:1983)

2010-12-17



ISO/DIS 16873 Hydraulic fluid power – Pressure switches – Mounting surfaces (Revision of ISO 16873:2002, ISO 16873:2002/Amd 1:2005)

2011-01-12

TC 135 Non-destructive testing

ISO/DIS 16371-1

Non-destructive testing – Industrial computed radiography with storage phosphor imaging plates – Part 1: Classification of systems

2011-01-06


ISO/DIS 10147 * Pipes and fittings made of crosslinked polyethylene (PE-X) – Estimation of the degree of crosslinking by determination of the gel content (Revision of ISO 10147:2004, ISO 10147:2004/Amd 1:2008)

2011-01-18

ISO/DIS 15874-1

Plastics piping systems for hot and cold water installations – Polypropylene (PP) – Part 1: General (Revision of ISO 15874-1:2003, ISO 15874-1:2003/Amd 1:2007)

2010-12-30

ISO/DIS 15874-2

Plastics piping systems for hot and cold water installations – Polypropylene (PP) – Part 2: Pipes (Revision of ISO 15874-2:2003, ISO 15874-2:2003/Amd 1:2007)

2010-12-30

ISO/DIS 15874-3

Plastics piping systems for hot and cold water installations – Polypropylene (PP) – Part 3: Fittings (Revision of ISO 15874-3:2003; ISO 15874-3:2003/FDAmd 1)

2010-12-30

ISO/DIS 15874-5

Plastics piping systems for hot and cold water installations – Polypropylene (PP) – Part 5: Fitness for purpose of the system (Revision of ISO 15874-5:2003)

2010-12-30

TC 146 Air quality

ISO/DIS 16000-4

Indoor air – Part 4: Determination of formaldehyde – Diffusive sampling method (Revision of ISO 16000-4:2004)

2010-12-31

ISO/DIS 28902 Air quality – Environmental meteorology – Ground-based remote sensing of visual range

2011-01-24


ISO/DIS 8692 * Water quality – Fresh-water algal growth inhibition test with unicellular green algae (Revision of ISO 8692:2004)

2011-01-13


ISO/DIS 14117 * Active implantable medical devices – Electromagnetic compatibility – EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization devices

2010-12-27

TC 157 Non-systemic contraceptives and STI barrier prophylactics

ISO/DIS 4074.2 Natural rubber latex condoms – Requirements and test methods (Revision of ISO 4074:2002, ISO 4074:2002/Cor 1:2003, ISO 4074:2002/Cor 2:2008)

2010-09-16

TC 159 Ergonomics

ISO/DIS 9241-143

Ergonomics of human-system interaction – Part 143: Form-based dialogues

2010-12-16

TC 163 Thermal performance and energy use in the built environment

ISO/DIS 12569 * Thermal performance of buildings and materials – Determination of specific airflow rate in buildings – Tracer gas dilution method (Revision of ISO 12569:2000)

2010-12-09

ISO/DIS 16534 * Thermal insulating products for building applications – Determination of compressive creep

2011-01-11

ISO/DIS 16535 * Thermal insulating products for building applications – Determination of long term water absorption by immersion

2011-01-11

ISO/DIS 16536 * Thermal insulating products for building applications – Determination of long term water absorption by diffusion

2011-01-11

ISO/DIS 16537 * Thermal insulating products for building applications – Determination of shear behaviour

2011-01-11

ISO/DIS 16544 * Thermal insulating products for building applications – Conditioning to moisture equilibrium under specified temperature and humidity conditions

2011-01-11

ISO/DIS 16545 * Thermal insulating products for building applications – Determination of behaviour under cyclic loading

2011-01-11

ISO/DIS 16546 * Thermal insulating products for building applications – Determination of freeze-thaw resistance

2011-01-11

TC 164 Mechanical testing of metals

ISO/DIS 13314 Mechanical testing of metals – Ductility testing – Compression test for porous and cellular metals

2010-12-17

TC 171 Document management applications

ISO/DIS 19005-2.2

* Document management – Electronic document file format for long-term preservation – Part 2: Use of ISO 32000-1 (PDF/A)

2010-10-19

TC 172 Optics and photonics

ISO/DIS 11252 Lasers and laser-related equipment – Laser device – Minimum requirements for documentation (Revision of ISO 11252:2004)

2010-12-30


ISO/DIS 12870 * Ophthalmic optics – Spectacle frames – Requirements and test methods (Revision of ISO 12870:2004)

2010-12-30

TC 173 Assistive products for persons with disability

ISO/DIS 12505 * Skin barrier for ostomy aids – Test methods

2010-12-27

TC 178 Lifts, escalators and moving walks

ISO/DIS 18738-1

Measurement of ride quality – Part 1: Lifts (elevators) (Revision of ISO 18738:2003)

2010-12-09

ISO/DIS 18738-2

* Measurement of ride quality – Part 2: Escalators and moving walks

2011-01-12

TC 190 Soil quality

ISO/DIS 10930 Soil quality – Measurement of the stability of soil aggregates subjected to the action of water

2011-01-07

ISO/DIS 12404 * Soil quality – Guidance on the selection and application of screening methods

2011-01-06

ISO/DIS 15009 Soil quality – Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons – Purge-and-trap method with thermal desorption (Revision of ISO 15009:2002)

2010-12-23

TC 201 Surface chemical analysis

ISO/DIS 16242 Surface chemical analysis – Recording and reporting data in Auger electron spectroscopy (AES)

2010-12-27

ISO/DIS 16243 Surface chemical analysis – Recording and reporting data in X-ray photoelectron spectroscopy (XPS)

2010-12-27

ISO/DIS 27911 * Surface chemical analysis – Scanning-probe microscopy – Definition and calibration of the lateral resolution of a near-field optical microscope

2010-12-11

TC 202 Microbeam analysis

ISO/DIS 13067 Microbeam analysis – Electron backscatter diffraction – Measurement of average grain size

2010-12-09

TC 205 Building environment design

ISO/DIS 11855-3

* Building environment design – Standards for the design, construction and operation of radiant heating and cooling systems – Part 3: Design and dimensioning

2011-01-24

TC 206 Fine ceramics

ISO/DIS 28704 * Fine ceramics (advanced ceramics, advanced technical ceramics) – Test method for cyclic bending fatigue of porous ceramics at room temperature

2010-12-21

TC 212 Clinical laboratory testing and in vitro diagnostic test systems

ISO/DIS 19001 * In vitro diagnostic medical devices – Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology (Revision of ISO 19001:2002)

2011-01-06

TC 213 Dimensional and geometrical product specifications and verification

ISO 1302:2002/DAmd 2

Geometrical Product Specifications (GPS) – Indication of surface texture in technical product documentation – Amendment 2: Indication of material ratio requirements

2010-12-23

ISO 5436-2:2001/DAmd 1

Geometrical Product Specifications (GPS) – Surface texture: Profile method; Measurement standards – Part 2: Software measurement standards – Amendment 1

2010-12-30

ISO/DIS 13225.2

Geometrical product specifications (GPS) – Dimensional measuring equipment; Height gauges – Design and metrological characteristics

2010-10-20

ISO 14660-2:1999/DAmd 1

Geometrical Product Specifications (GPS) – Geometrical features – Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature – Amendment 1

2011-01-13


ISO/DIS 27953-1.2

Health informatics – Individual case safety reports (ICSRs) in pharmacovigilance – Part 1: The framework for adverse event reporting

2010-09-16

ISO/DIS 27953-2.2

Health informatics – Individual case safety reports (ICSRs) in pharmacovigilance – Part 2: Human pharmaceutical reporting requirements for ICSR

2010-09-16

TC 216 Footwear

ISO/DIS 20877.2

Footwear – Test methods for whole shoe – Thermal insulation (Revision of ISO 20877:2001)

9999-01-01

TC 217 Cosmetics

ISO/DIS 24443 * Determination of sunscreen UVA photoprotection in vitro

2010-12-23

TC 220 Cryogenic vessels

ISO/DIS 21013-4

* Cryogenic vessels – Pilot operated pressure relief devices – Part 4: Pressure-relief accessories for cryogenic service

2010-12-31


ISO/IEC DIS 10995

* Information technology – Digitally recorded media for information interchange and storage – Test method for the estimation of the archival lifetime of optical media (Revision of ISO/IEC 10995:2008)

2011-01-10


FDIS circulated

Period from 06 July to 24 August 2010These Final draft International Standards have been submitted to theISO member bodies for formal approval by the date shown*Available in English only

ISO/IEC DIS 12862

* Information technology – 120 mm (8,54 Gbytes per side) and 80 mm (2,66 Gbytes per side) DVD recordable disk for dual layer (DVD-R for DL) (Revision of ISO/IEC 12862:2009)

2011-01-10

ISO/IEC DIS 16504

* Information technology – Telecommunications and information exchange between systems – MAC and PHY for operation in TV white space

2010-12-27

Voteterminates


ISO/FDIS 2493-1

* Paper and board – Determination of bending resistance – Part 1: Constant rate of deflection (Revision of ISO 2493:1992, ISO/NP 2493)

2010-10-13


ISO/FDIS 24409-1

* Ships and marine technology – Design, location and use of shipboard safety signs for fire protection, life-saving appliances, and means of escape – Part 1: Design principles

2010-10-17

TC 17 Steel

ISO/FDIS 15630-1

Steel for the reinforcement and prestressing of concrete – Test methods – Part 1: Reinforcing bars, wire rod and wire (Revision of ISO 15630-1:2002)

2010-09-23

ISO/FDIS 15630-2

Steel for the reinforcement and prestressing of concrete – Test methods – Part 2: Welded fabric (Revision of ISO 15630-2:2002)

2010-09-23

ISO/FDIS 15630-3

Steel for the reinforcement and prestressing of concrete – Test methods – Part 3: Prestressing steel (Revision of ISO 15630-3:2002)

2010-09-23


ISO/FDIS 3987 * Petroleum products – Determination of sulfated ash in lubricating oils and additives (Revision of ISO 3987:1994)

2010-10-21

ISO/FDIS 4404-2

* Petroleum and related products – Determination of the corrosion resistance of fire-resistant hydraulic fluids – Part 2: Non-aqueous fluids (Revision of ISO 4404-2:2003)

2010-10-13

TC 30 Measurement of fluid flow in closed conduits

ISO/FDIS 17089-1

Measurement of fluid flow in closed conduits - Ultrasonic meters for gas – Part 1: Meters for custody transfer and allocation measurement

2010-10-17

TC 31 Tyres, rims and valves

ISO/FDIS 4249-3

Motorcycle tyres and rims (code-designated series) – Part 3: Rims (Revision of ISO 4249-3:2004)

2010-10-05

TC 34 Food products

ISO/FDIS 520 Cereals and pulses – Determination of the mass of 1 000 grains (Revision of ISO 520:1977)

2010-10-13

ISO/FDIS 6731 Milk, cream and evaporated milk – Determination of total solids content (Reference method) (Revision of ISO 6731:1989)

2010-10-24

ISO/FDIS 6734 Sweetened condensed milk – Determination of total solids content (Reference method) (Revision of ISO 6734:1989)

2010-10-24

ISO/FDIS 27608 Animal and vegetable fats and oils – Determination of Lovibond colour – Automatic method

2010-09-22


ISO/FDIS 10890 Paints and varnishes – Modelling of biocide release rate from antifouling paints by mass-balance calculation

2010-09-16


ISO/FDIS 24615* Language resource management – Syntactic annotation framework (SynAF)

2010-10-03

TC 38 Textiles

ISO/FDIS 30023 Textiles – Qualification symbols for labelling workwear to be industrially laundered

2010-10-21

TC 43 Acoustics

ISO/FDIS 3746 * Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Survey method using an enveloping measurement surface over a reflecting plane (Revision of ISO 3746:1995, ISO 3746:1995/Cor 1:1995)

2010-10-13

ISO/FDIS 3747 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering/survey methods for use in situ in a reverberant environment (Revision of ISO 3747:2000)

2010-10-06


ISO/FDIS 6947 Welding and allied processes – Welding positions (Revision of ISO 6947:1990)

2010-09-08


ISO/FDIS 7291 Gas welding equipment – Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar) (Revision of ISO 7291:1999)

2010-09-23

ISO/FDIS 14171 Welding consumables – Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels – Classification (Revision of ISO 14171:2002)

2010-09-08

ISO/FDIS 17633 Welding consumables – Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels – Classification (Revision of ISO 17633:2004)

2010-09-30


ISO/FDIS 8942 Rubber compounding ingredients – Carbon black – Determination of individual pellet crushing strength (Revision of ISO/TR 8942:1988)

2010-10-07

ISO/FDIS 23529 Rubber – General procedures for preparing and conditioning test pieces for physical test methods (Revision of ISO 23529:2004)

2010-09-13

TC 54 Essential oils

ISO/FDIS 10869 Oil of fir needle, Siberian (Abies sibirica Ledeb.)

2010-10-21

TC 58 Gas cylinders

ISO/FDIS 10961* Gas cylinders – Cylinder bundles – Design, manufacture, testing and inspection (Revision of ISO 10961:2010)

2010-09-16

TC 61 Plastics

ISO/FDIS 1874-1

Plastics – Polyamide (PA) moulding and extrusion materials – Part 1: Designation system and basis for specification (Revision of ISO 1874-1:1992)

2010-10-13

ISO 1874-2:2006/FDAmd 1

Plastics – Polyamide (PA) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties – Amendment 1: Laser sintering of specimens

2010-10-13

ISO/FDIS 2558 * Textile glass chopped-strand mats for reinforcement of plastics – Determination of time of dissolution of the binder in styrene (Revision of ISO 2558:1974)

2010-09-09

ISO/FDIS 29664* Plastics – Artificial weathering including acidic deposition

2010-09-24


ISO 13500:2008/FDAmd 1

* Petroleum and natural gas industries – Drilling fluid materials – Specifications and tests – Amendment 1: Barite 4,1

2010-10-13

ISO/FDIS 19901-3

* Petroleum and natural gas industries – Specific requirements for offshore structures – Part 3: Topsides structure

2010-10-20

TC 79 Light metals and their alloys

ISO/FDIS 6719 Anodizing of aluminium and its alloys – Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments (Revision of ISO 6719:1986)

2010-09-16

ISO/FDIS 7668 Anodizing of aluminium and its alloys – Measurement of specular reflectance and specular gloss of anodic oxidation coating at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees (Revision of ISO 7668:1986)

2010-09-30

TC 89 Wood-based panels

ISO/FDIS 16893-2

* Wood-based panels – Particleboard – Part 2: Requirements

2010-10-03

ISO/FDIS 16895-2

* Wood-based panels – Dry-process fibreboard – Part 2: Requirements

2010-10-03

TC 94 Personal safety – Protective clothing and equipment

ISO 13982-1:2004/FDAmd 1

Protective clothing for use against solid particulates – Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) – Amendment 1

2010-09-23

ISO/FDIS 20349* Personal protective equipment – Footwear protecting against thermal risks and molten metal splash – Requirements and test methods

2010-09-30


ISO/FDIS 28762 Vitreous and porcelain enamels – Enamel coatings applied to steel for writing surfaces – Specification (Revision of ISO 28762:2008)

2010-09-23

TC 109 Oil and gas burners

ISO/FDIS 22967* Forced draught gas burners 2010-09-16

ISO/FDIS 22968* Forced draught oil burners 2010-09-17

TC 110 Industrial trucks

ISO/FDIS 3691-1

Industrial trucks – Safety requirements and verification – Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks

2010-09-30

TC 113 Hydrometry

ISO/FDIS 1100-2

* Hydrometry – Measurement of liquid flow in open channels – Part 2: Determination of the stage-discharge relationship (Revision of ISO 1100-2:1998, ISO 1100-2:1998/Cor 1:2000)

2010-10-24


ISO/FDIS 2425 * Hydrometry – Measurement of liquid flow in open channels under tidal conditions (Revision of ISO 2425:1999, ISO 2425:1999/Amd 1:2003)

2010-10-07

TC 117 Fans

ISO 14694:2003/FDAmd 1

Industrial fans – Specifications for balance quality and vibration levels – Amendment 1

2010-10-21

TC 119 Powder metallurgy

ISO/FDIS 28279* Sintered metal materials – Determination of the level of cleanliness of powder-metallurgy parts

2010-09-12

TC 121 Anaesthetic and respiratory equipment

ISO 8835-3:2007/FDAmd 1

Inhalational anaesthesia systems – Part 3: Transfer and receiving systems of active anaesthetic gas scavenging systems – Amendment 1

2010-09-09

TC 127 Earth-moving machinery

ISO/FDIS 15818.2

Earth-moving machinery – Lifting and tying-down attachment points – Performance requirements

2010-10-25


ISO/FDIS 15076-1

* Image technology colour management – Architecture, profile format and data structure – Part 1: Based on ICC.1:2004-10 (Revision of ISO 15076-1:2005)

2010-10-19


ISO/FDIS 4413 Hydraulic fluid power – General rules and safety requirements for systems and their components (Revision of ISO 4413:1998)

2010-10-06

ISO/FDIS 4414 Pneumatic fluid power – General rules and safety requirements for systems and their components (Revision of ISO 4414:1998)

2010-10-06

ISO/FDIS 10041-1

Pneumatic fluid power – Electro-pneumatic continuous flow control valves – Part 1: Main characteristics to include in the supplier's literature

2010-09-12

ISO/FDIS 10041-2

Pneumatic fluid power – Electro-pneumatic continuous flow control valves – Part 2: Test methods to determine main characteristics to include in the supplier's literature

2010-09-12

ISO/FDIS 10094-1

Pneumatic fluid power – Electro-pneumatic pressure control valves – Part 1: Main characteristics to include in the supplier's literature

2010-09-22

ISO/FDIS 10094-2

Pneumatic fluid power – Electro-pneumatic pressure control valves – Part 2: Test methods to determine main characteristics to include in the supplier's literature

2010-09-22


ISO 15877-1:2009/FDAmd 1

Plastics piping systems for hot and cold water installations – Chlorinated poly(vinyl chloride) (PVC-C) – Part 1: General – Amendment 1

2010-10-06

ISO 15877-2:2009/FDAmd 1

Plastics piping systems for hot and cold water installations – Chlorinated poly(vinyl chloride) (PVC-C) – Part 2: Pipes – Amendment 1

2010-10-06

ISO 15877-3:2009/FDAmd 1

Plastics piping systems for hot and cold water installations – Chlorinated poly(vinyl chloride) (PVC-C) – Part 3: Fittings – Amendment 1

2010-10-06

ISO 15877-5:2009/FDAmd 1

Plastics piping systems for hot and cold water installations – Chlorinated poly(vinyl chloride) (PVC-C) – Part 5: Fitness for purpose of the system – Amendment 1

2010-10-06

TC 145 Graphical symbols

ISO/FDIS 28564-1

Public information guidance systems – Part 1: Design principles and element requirements for location plans, maps and diagrams

2010-10-04


ISO/FDIS 5667-21

* Water quality – Sampling – Part 21: Guidance on sampling of drinking water distributed by tankers or means other than distribution pipes

2010-09-28

TC 159 Ergonomics

ISO/FDIS 9241-129

Ergonomics of human-system interaction – Part 129: Guidance on software individualization

2010-10-20

TC 161 Control and protective devices for gas and/or oil burners and appliances

ISO 23551-4:2005/FDAmd 1

* Safety and control devices for gas burners and gas-burning appliances – Particular requirements – Part 4: Valve-proving systems for automatic shut-off valves – Amendment 1: Application guidance for the valve-proving system

2010-10-13

TC 164 Mechanical testing of metals

ISO/FDIS 1143 * Metallic materials – Rotating bar bending fatigue testing (Revision of ISO 1143:1975)

2010-09-29


ISO/FDIS 11986 Ophthalmic optics – Contact lenses and contact lens care products – Determination of preservative uptake and release (Revision of ISO 11986:1999)

2010-10-06

TC 199 Safety of machinery

ISO/FDIS 12100 Safety of machinery – General principles for design – Risk assessment and risk reduction (Revision of ISO 12100-1:2003, ISO 12100-2:2003, ISO 14121-1:2007)

2010-09-08



ISO/FDIS 21215* Intelligent transport systems – Communications access for land mobiles (CALM) – M5

2010-09-27

ISO/FDIS 24102* Intelligent transport systems – Communications access for land mobiles (CALM) – Management

2010-09-21

TC 205 Building environment design

ISO/FDIS 16484-1

* Building automation and control systems (BACS) – Part 1: Project specification and implementation

2010-09-30

ISO/FDIS 16484-5

* Building automation and control systems – Part 5: Data communication protocol (Revision of ISO 16484-5:2007, ISO 16484-5:2007/Amd 1:2009)

2010-10-06

TC 209 Cleanrooms and associated controlled environments

ISO/FDIS 14644-9

Cleanrooms and associated controlled environments – Part 9: Classification of surface cleanliness by particle concentration

2010-09-08

TC 211 Geographic information/Geomatics

ISO/FDIS 19146 Geographic information – Cross-domain vocabularies

2010-09-23


ISO/FDIS 8015 Geometrical product specifications (GPS) – Fundamentals – Concepts, principles and rules (Revision of ISO 8015:1985; ISO/DIS 14659.2)

2010-09-30

ISO/FDIS 14405-1

Geometrical product specifications (GPS) – Dimensional tolerancing – Part 1: Linear sizes

2010-10-13

ISO/FDIS 14406 Geometrical product specifications (GPS) – Extraction

2010-09-08


IEC/FDIS 80001-1

Application of risk management for IT-networks incorporating medical devices – Part 1: Roles, responsibilities and activities

2010-09-24

TMB/WG SR Technical Management Board/Social responsibility

ISO/FDIS 26000 Guidance on social responsibility 2010-09-13


ISO/IEC FDIS 9798-6

* Information technology – Security techniques – Entity authentication – Part 6: Mechanisms using manual data transfer (Revision of ISO/IEC 9798-6:2005)

2010-10-06

ISO/IEC FDIS 11581-10

* Information technology – User interface icons – Part 10: Framework and general guidance

2010-10-05


* Information technology – Security techniques – Key management – Part 1: Framework (Revision of ISO/IEC 11770-1:1996)

2010-09-27


* Information technology – Topic Maps – Part 6: Compact syntax

2010-10-25


* Information technology – Security techniques – Non-repudiation – Part 2: Mechanisms using symmetric techniques (Revision of ISO/IEC 13888-2:1998)

2010-10-07

ISO/IEC 14496-1:2010/FDAM 1

* Information technology – Coding of audio-visual objects – Part 1: Systems – Amendment 1: Usage of LASeR in MPEG-4 systems and Registration Authority for MPEG-4 descriptors (Revision of ISO/IEC 14496-1:2004/PDAM 4)

2010-09-27

ISO/IEC 14496-11:2005/FDAM 7

* Information technology – Coding of audio-visual objects – Part 11: Scene description and application engine – Amendment 7: ExtendedCore2D profile

2010-09-24

ISO/IEC 14496-3:2009/FDAM 2

* Information technology – Coding of audio-visual objects – Part 3: Audio – Amendment 2: ALS simple profile and transport of SAOC

2010-09-24

ISO/IEC FDIS 14543-5-4.2

* Information technology – Home electronic system (HES) architecture – Part 5-4: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Device validation

2010-09-21

ISO/IEC 15444-3:2007/FDIS Amd 1

* Information technology – JPEG 2000 image coding system: Motion JPEG 2000 – Part 3: – Amendment 1: Additional profiles for archiving applications

2010-09-16


* Identification cards – Contactless integrated circuit cards – Vicinity cards – Part 1: Physical characteristics (Revision of ISO/IEC 15693-1:2000)

2010-09-09

ISO/IEC 15938-3:2002/FDAM 4

* Information technology – Multimedia content description interface – Part 3: Visual – Amendment 4: Video signature tools

2010-09-27


* Information technology – Radio frequency identification for item management – Part 3: Parameters for air interface communications at 13,56 MHz (Revision of ISO/IEC 18000-3:2008)

2010-10-25


* Information technology – Security techniques – Encryption algorithms – Part 3: Block ciphers (Revision of ISO/IEC 18033-3:2005, ISO/IEC 18033-3:2005/Cor 1:2006, ISO/IEC 18033-3:2005/Cor 3:2008, ISO/IEC 18033-3:2005/Cor 2:2007)

2010-09-12


* Information technology – MPEG audio technologies – Part 2: Spatial Audio Object Coding (SAOC)

2010-09-17


Standards published

New International Standards published between 06 July and 24August 2010*Available in English only** French version of standard previously published in English only


* Information technology – Rich media user interfaces – Part 1: Widgets

2010-09-24

ISO/IEC FDIS 26512

* Systems and software engineering – Requirements for acquirers and suppliers of user documentation (Revision of ISO/IEC 15910:1999)

2010-10-11


* Information technology – JPEG XR image coding system – Part 3: Motion JPEG XR

2010-09-27

Pricegroup


ISO 3039:2010 * Corrugated fibreboard – Determination of grammage of the component papers after separation

D

ISO 11476:2010 Paper and board – Determination of CIE whiteness, C/2 degrees (indoor illumination conditions)

G


ISO/PAS 13613:2010

* Ships and marine technology – Maintenance and testing to reduce losses in critical systems for propulsion

F

ISO/PAS 30005:2010

* Ships and marine technology – Ship recycling management systems – Information control for hazardous materials in the manufacturing chain of shipbuilding and ship operations

M

TC 10 Technical product documentation

ISO/TS 128-71:2010

* Technical product documentation (TPD) – General principles of presentation – Part 71: Simplified representation for mechanical engineering drawings

E


ISO 11231:2010 * Space systems – Probabilistic risk assessment (PRA)

J

ISO 15856:2010 * Space systems – Space environment – Simulation guidelines for radiation exposure of non-metallic materials

M

ISO 22538-6:2010

* Space systems – Oxygen safety – Part 6: Facility planning and implementation

K


ISO/TS 11602-1:2010

* Fire protection – Portable and wheeled fire extinguishers – Part 1: Selection and installation

F

ISO/TS 11602-2:2010

* Fire protection – Portable and wheeled fire extinguishers – Part 2: Inspection and maintenance

K

TC 22 Road vehicles

ISO 1726-3:2010

* Road vehicles – Mechanical couplings between tractors and semi-trailers – Part 3: Requirements for semi-trailer contact area to fifth wheel

C

ISO 4107:2010 * Commercial vehicles – Wheel-hub attachment dimensions

A

ISO 6312:2010 * Road vehicles – Brake linings – Shear test procedure for disc brake pad and drum brake shoe assemblies

F

ISO 15031-2:2010

* Road vehicles – Communication between vehicle and external equipment for emissions-related diagnostics – Part 2: Guidance on terms, definitions, abbreviations and acronyms

D

ISO 15031-6:2010

* Road vehicles – Communication between vehicle and external equipment for emissions-related diagnostics – Part 6: Diagnostic trouble code definitions

G

ISO/TS 19713-1:2010

* Road vehicles – Inlet air cleaning equipment for internal combustion engines and compressors – Part 1: Fractional efficiency testing with fine particles (0,3 m to 5 m optical diameter)

U

ISO/TS 19713-2:2010

* Road vehicles – Inlet air cleaning equipment for internal combustion engines and compressors – Part 2: Fractional efficiency testing with coarse particles (5 m to 40 m optical diameter)

R

ISO 26022:2010 * Road vehicles – Ergonomic aspects of transport information and control systems – Simulated lane change test to assess in-vehicle secondary task demand

S

ISO 27955:2010 Road vehicles – Securing of cargo in passenger cars, station wagons and multi-purpose vehicles – Requirements and test methods

H


ISO 14223-2:2010

Radiofrequency identification of animals – Advanced transponders – Part 2: Code and command structure

Q

TC 24 Particle characterization including sieving

ISO 9277:2010 * Determination of the specific surface area of solids by gas adsorption – BET method

M

TC 29 Small tools

ISO 5610-1:2010

Tool holders with rectangular shank for indexable inserts – Part 1: General survey, correlation and determination of dimensions

H

ISO 5610-10:2010

Tool holders with rectangular shank for indexable inserts – Part 10: Style N

D

ISO 5610-11:2010

Tool holders with rectangular shank for indexable inserts – Part 11: Style R

D


ISO 5610-12:2010

Tool holders with rectangular shank for indexable inserts – Part 12: Style S

F

ISO 5610-13:2010

Tool holders with rectangular shank for indexable inserts – Part 13: Style T

C

ISO 5610-14:2010

Tool holders with rectangular shank for indexable inserts – Part 14: Style H

D

ISO 5610-15:2010

Tool holders with rectangular shank for indexable inserts – Part 15: Style V

C

ISO 5610-2:2010

Tool holders with rectangular shank for indexable inserts – Part 2: Style A

D

ISO 5610-3:2010

Tool holders with rectangular shank for indexable inserts – Part 3: Style B

D

ISO 5610-4:2010

Tool holders with rectangular shank for indexable inserts – Part 4: Style D

D

ISO 5610-5:2010

Tool holders with rectangular shank for indexable inserts – Part 5: Style F

D

ISO 5610-6:2010

Tool holders with rectangular shank for indexable inserts – Part 6: Style G

D

ISO 5610-7:2010

Tool holders with rectangular shank for indexable inserts – Part 7: Style J

E

ISO 5610-8:2010

Tool holders with rectangular shank for indexable inserts – Part 8: Style K

D

ISO 5610-9:2010

Tool holders with rectangular shank for indexable inserts – Part 9: Style L

E

ISO 9270-1:2010

7/24 taper spindle noses for automatic tool changers – Part 1: Dimensions and designation of spindle noses of forms S and SF

D

ISO 9270-2:2010

7/24 taper spindle noses for automatic tool changers – Part 2: Dimensions and designation of spindle noses of forms J and JF

D

ISO 10649-1:2010

Cutter arbors with parallel key and tenon drive – Part 1: General dimensions

A

ISO 10649-2:2010

Cutter arbors with parallel key and tenon drive – Part 2: Dimensions and designation of tool holders with hollow taper interface with flange contact surface

B

ISO 10649-3:2010

Cutter arbors with parallel key and tenon drive – Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changers

B

ISO 10649-4:2010

Cutter arbors with parallel key and tenon drive – Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changers

B

TC 34 Food products

ISO 6887-5:2010

Microbiology of food and animal feeding stuffs – Preparation of test samples, initial suspension and decimal dilutions for microbiological examination – Part 5: Specific rules for the preparation of milk and milk products

G


ISO 639-4:2010 Codes for the representation of names of languages – Part 4: General principles of coding of the representation of names of languages and related entities, and application guidelines

N

ISO 29383:2010 Terminology policies – Development and implementation

H

TC 38 Textiles

ISO 105-E05:2010

Textiles – Tests for colour fastness – Part E05: Colour fastness to spotting: Acid

B

ISO 2061:2010 Textiles – Determination of twist in yarns – Direct counting method

F

ISO 2307:2010 Fibre ropes – Determination of certain physical and mechanical properties

H

ISO 9554:2010 Fibre ropes – General specifications L

ISO 10617:2010 Textiles – Standard data format for colorimetric communication – Textiles and related measurements

R

TC 42 Photography

ISO 18911:2010 * Imaging materials – Processed safety photographic films – Storage practices

M

TC 43 Acoustics

ISO 7779:2010 Acoustics – Measurement of airborne noise emitted by information technology and telecommunications equipment

V

ISO 10140-1:2010

* Acoustics – Laboratory measurement of sound insulation of building elements – Part 1: Application rules for specific products

P

ISO 10140-2:2010

* Acoustics – Laboratory measurement of sound insulation of building elements – Part 2: Measurement of airborne sound insulation

G

ISO 10140-3:2010

* Acoustics – Laboratory measurement of sound insulation of building elements – Part 3: Measurement of impact sound insulation

F

ISO 10140-4:2010

* Acoustics – Laboratory measurement of sound insulation of building elements – Part 4: Measurement procedures and requirements

F

ISO 10140-5:2010

* Acoustics – Laboratory measurement of sound insulation of building elements – Part 5: Requirements for test facilities and equipment

Q

ISO 10848-4:2010

* Acoustics – Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms – Part 4: Application to junctions with at least one heavy element

E


ISO 10675-2:2010

Non-destructive testing of welds – Acceptance levels for radiographic testing – Part 2: Aluminium and its alloys

E

ISO 11745:2010 * Brazing for aerospace applications – Qualification test for brazers and brazing operators – Brazing of metallic components

J


ISO 813:2010 Rubber, vulcanized or thermoplastic – Determination of adhesion to a rigid substrate – 90 degree peel method

E

ISO 2004:2010 Natural rubber latex concentrate – Centrifuged or creamed, ammonia-preserved types – Specifications

B


ISO 2781:2008/Amd 1:2010

Rubber, vulcanized or thermoplastic – Determination of density – Amendment 1: Precision data

XZ

ISO 4641:2010 Rubber hoses and hose assemblies for water suction and discharge – Specification

F

ISO 28343:2010 Rubber compounding ingredients – Process oils – Determination of glass transition temperature by DSC

D

TC 58 Gas cylinders

ISO 10156:2010/Cor 1:2010

Gases and gas mixtures – Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets – Technical Corrigendum 1

free

TC 61 Plastics

ISO 877-1:2009**

Plastics – Methods of exposure to solar radiation – Part 1: General guidance

G

ISO 877-2:2009**

Plastics – Methods of exposure to solar radiation – Part 2: Direct weathering and exposure behind window glass

C

ISO 877-3:2009**

Plastics – Methods of exposure to solar radiation – Part 3: Intensified weathering using concentrated solar radiation

F


ISO 10426-1:2009**

Petroleum and natural gas industries – Cements and materials for well cementing – Part 1: Specification

R

ISO 13628-1:2005/Amd 1:2010

* Petroleum and natural gas industries – Design and operation of subsea production systems – Part 1: General requirements and recommendations – Amendment 1: Revised Clause 6

XZ

ISO 28781:2010 * Petroleum and natural gas industries – Drilling and production equipment –Subsurface barrier valves and related equipment

T


ISO/TR 12845:2010

Selected illustrations of fractional factorial screening experiments

W

TC 70 Internal combustion engines

ISO 7967-3:2010

Reciprocating internal combustion engines – Vocabulary of components and systems – Part 3: Valves, camshaft drives and actuating mechanisms

F

TC 76 Transfusion, infusion and injection equipment for medical and pharmaceutical use

ISO 8362-6:2010**

Injection containers and accessories – Part 6: Caps made of aluminium-plastics combinations for injection vials

B

TC 79 Light metals and their alloys

ISO 2085:2010 Anodizing of aluminium and its alloys – Check for continuity of thin anodic oxidation coatings – Copper sulfate test

A

ISO 2128:2010 Anodizing of aluminium and its alloys – Determination of thickness of anodic oxidation coatings – Non-destructive measurement by split-beam microscope

B

ISO 2376:2010 Anodizing of aluminium and its alloys – Determination of electric breakdown potential

B

ISO 3211:2010 Anodizing of aluminium and its alloys – Assessment of resistance of anodic oxidation coatings to cracking by deformation

C

ISO 7759:2010 Anodizing of aluminium and its alloys – Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer

E

ISO 8993:2010 Anodizing of aluminium and its alloys – Rating system for the evaluation of pitting corrosion – Chart method

F

ISO 10215:2010 Anodizing of aluminium and its alloys – Visual determination of image clarity of anodic oxidation coatings – Chart scale method

D

TC 85 Nuclear energy

ISO 10276:2010 * Nuclear energy – Fuel technology – Trunnions for packages used to transport radioactive material

K

ISO 26802:2010 Nuclear facilities – Criteria for the design and the operation of containment and ventilation systems for nuclear reactors

X

TC 87 Cork

ISO 2219:2010 Thermal insulation products for buildings – Factory-made products of expanded cork (ICB) – Specification

M

TC 96 Cranes

ISO 4309:2010 Cranes – Wire ropes – Care and maintenance, inspection and discard

U

TC 98 Bases for design of structures

ISO 13822:2010 * Bases for design of structures – Assessment of existing structures

S

TC 102 Iron ore and direct reduced iron

ISO 4701:2008/Cor 1:2010

* Iron ores and direct reduced iron – Determination of size distribution by sieving – Technical Corrigendum 1

free

TC 108 Mechanical vibration, shock and condition monitoring

ISO 18436-1:2004**

Condition monitoring and diagnostics of machines – Requirements for training and certification of personnel – Part 1: Requirements for certifying bodies and the certification process

F

ISO 18436-3:2008/Amd 1:2009**

Condition monitoring and diagnostics of machines – Requirements for qualification and assessment of personnel – Part 3: Requirements for training bodies and the training process – Amendment 1

XZ

ISO 18436-3:2008**

Condition monitoring and diagnostics of machines – Requirements for qualification and assessment of personnel – Part 3: Requirements for training bodies and the training process

F


TC 114 Horology

ISO 22810:2010 Horology – Water-resistant watches D

TC 119 Powder metallurgy

ISO 11876:2010 Hardmetals – Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders – Flame atomic absorption spectrometric method

B

TC 123 Plain bearings

ISO/TR 27507:2010

* Plain bearings – Recommendations for automotive crankshaft bearing environments

C

TC 127 Earth-moving machinery

ISO 15143-1:2010

Earth-moving machinery and mobile road construction machinery – Worksite data exchange – Part 1: System architecture

U

ISO 15143-2:2010

Earth-moving machinery and mobile road construction machinery – Worksite data exchange – Part 2: Data dictionary

U


ISO 12646:2008/Amd 1:2010

* Graphic technology – Displays for colour proofing – Characteristics and viewing conditions – Amendment 1

XZ

ISO 15930-7:2010

* Graphic technology – Prepress digital data exchange using PDF – Part 7: Complete exchange of printing data (PDF/X-4) and partial exchange of printing data with external profile reference (PDF/X-4p) using PDF 1.6

N

ISO 15930-8:2010

* Graphic technology – Prepress digital data exchange using PDF – Part 8: Partial exchange of printing data using PDF 1.6 (PDF/X-5)

G

ISO 16612-2:2010

* Graphic technology – Variable data exchange – Part 2: Using PDF/X-4 and PDF/X-5 (PDF/VT-1 and PDF/VT-2)

R


ISO 10468:2003/Amd 1:2010

* Glass-reinforced thermosetting plastics (GRP) pipes – Determination of the long-term specific ring creep stiffness under wet conditions and calculation of the wet creep factor – Amendment 1

XZ

ISO 10471:2003/Amd 1:2010

* Glass-reinforced thermosetting plastics (GRP) pipes – Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions – Amendment 1

XZ

ISO 14828:2003/Amd 1:2010

* Glass-reinforced thermosetting plastics (GRP) pipes – Determination of the long-term specific ring relaxation stiffness under wet conditions and calculation of the wet relaxation factor – Amendment 1

XZ

ISO/TS 21003-7:2008/Amd 1:2010

Multilayer piping systems for hot and cold water installations inside buildings – Part 7: Guidance for the assessment of conformity – Amendment 1

XZ

ISO/TS 26873:2010

* Plastics pipes and fittings – Definition and construction procedures for reference lines

C

TC 146 Air quality

ISO 21438-3:2010

Workplace atmospheres – Determination of inorganic acids by ion chromatography – Part 3: Hydrofluoric acid and particulate fluorides

N

ISO 25140:2010 Stationary source emissions – Automatic method for the determination of the methane concentration using flame ionisation detection (FID)

P


ISO 5667-22:2010

* Water quality – Sampling – Part 22: Guidance on the design and installation of groundwater monitoring points

R

ISO 19250:2010 Water quality – Detection of Salmonella spp.

L

ISO 21338:2010 * Water quality – Kinetic determination of the inhibitory effects of sediment, other solids and coloured samples on the light emission of Vibrio fischeri (kinetic luminescent bacteria test)

L

TC 160 Glass in building

ISO 20492-3:2010

* Glass in buildings – Insulating glass – Part 3: Gas concentration and gas leakage

N

ISO 20492-4:2010

* Glass in buildings – Insulating glass – Part 4: Methods of test for the physical attributes of edge seals

M

TC 163 Thermal performance and energy use in the built environment

ISO 8301:1991/Amd 1:2010

* Thermal insulation – Determination of steady-state thermal resistance and related properties – Heat flow meter apparatus – Amendment 1

XZ

TC 165 Timber structures

ISO 20152-1:2010

* Timber structures – Bond performance of adhesives – Part 1: Basic requirements

N

ISO 22390:2010 * Timber structures – Laminated veneer lumber – Structural properties

E


ISO 10244:2010 * Document management – Business process baselining and analysis

E

ISO 12029:2010 * Document management – Machine-readable paper forms – Optimal design for user friendliness and electronic document management systems (EDMS)

J


ISO 11990-2:2010

Lasers and laser-related equipment – Determination of laser resistance of tracheal tubes – Part 2: Tracheal tube cuffs

F

ISO 15529:2010 Optics and photonics – Optical transfer function – Principles of measurement of modulation transfer function (MTF) of sampled imaging systems

M


ISO 25297-1:2010

* Optics and photonics – Electronic exchange of optical data – Part 1: NODIF information model

X

TC 184 Automation systems and integration

ISO/TS 13584-35:2010

* Industrial automation systems and integration – Parts library – Part 35: Implementation resources: Spreadsheet interface for parts library

XB

ISO 20242-2:2010

* Industrial automation systems and integration – Service interface for testing applications – Part 2: Resource management service interface

W

TC 194 Biological evaluation of medical devices

ISO 10993-10:2010

* Biological evaluation of medical devices – Part 10: Tests for irritation and skin sensitization

V

TC 198 Sterilization of health care products

ISO 20857:2010 * Sterilization of health care products – Dry heat – Requirements for the development, validation and routine control of a sterilization process for medical devices

U


ISO 14237:2010 Surface chemical analysis – Secondary-ion mass spectrometry – Determination of boron atomic concentration in silicon using uniformly doped materials

K

ISO 18115-1:2010

Surface chemical analysis – Vocabulary – Part 1: General terms and terms used in spectroscopy

XA

ISO 18115-2:2010

Surface chemical analysis – Vocabulary – Part 2: Terms used in scanning-probe microscopy

T


ISO 24534-1:2010

* Automatic vehicle and equipment identification – Electronic registration identification (ERI) for vehicles – Part 1: Architecture

D

ISO 24534-2:2010

* Automatic vehicle and equipment identification – Electronic registration identification (ERI) for vehicles – Part 2: Operational requirements

J

ISO 24534-3:2010

* Automatic vehicle and equipment identification – Electronic registration identification (ERI) for vehicles – Part 3: Vehicle data

P

ISO 24534-4:2010

* Automatic vehicle and equipment identification – Electronic registration identification (ERI) for vehicles – Part 4: Secure communications using asymmetrical techniques

X


ISO/TS 16610-28:2010

Geometrical product specifications (GPS) – Filtration – Part 28: Profile filters: End effects

J

ISO/TS 16610-31:2010

Geometrical product specifications (GPS) – Filtration – Part 31: Robust profile filters: Gaussian regression filters

F


ISO/TS 27527:2010

* Health informatics – Provider identification W

TC 219 Floor coverings

ISO 26986:2010 * Resilient floor coverings – Expanded (cushioned) poly(vinyl chloride) floor covering – Specification

D

TC 229 Nanotechnologies

ISO/TR 11360:2010

Nanotechnologies – Methodology for the classification and categorization of nanomaterials

M

TC 231 Project Committee: Brand valuation

ISO 10668:2010 Brand valuation – Requirements for monetary brand valuation

F


ISO/IEC 9995-3:2010

Information technology – Keyboard layouts for text and office systems – Part 3: Complementary layouts of the alphanumeric zone of the alphanumeric section

F

ISO/IEC 10646:2003/Amd 7:2010

* Information technology – Universal Multiple-Octet Coded Character Set (UCS) – Amendment 7: Mandaic, Batak, Brahmi, and other characters

R

ISO/IEC 13818-1:2007/Amd 4:2009

* Information technology – Generic coding of moving pictures and associated audio information: Systems – Part 1: – Amendment 4: Transport of multiview video over Rec. ITU-T H.222.0 | ISO/IEC 13818-1

L

ISO/IEC 14443-2:2010

* Identification cards – Contactless integrated circuit cards – Proximity cards – Part 2: Radio frequency power and signal interface

M

ISO/IEC TR 15026-1:2010

* Systems and software engineering – Systems and software assurance – Part 1: Concepts and vocabulary

X

ISO/IEC 15419:2009**

Information technology – Automatic identification and data capture techniques – Bar code digital imaging and printing performance testing

M

ISO/IEC 15938-7:2003/Amd 5:2010

* Information technology – Multimedia content description interface – Part 7: Conformance testing – Amendment 5: Conformance testing for image signature tools

XZ

ISO/IEC TR 16166:2010

* Information technology – Telecommunications and information exchange between systems – Next Generation Corporate Networks (NGCN) – Security of session-based communications

M

ISO/IEC TR 16167:2010

* Information technology – Telecommunications and information exchange between systems – Next Generation Corporate Networks (NGCN) – Emergency calls

Q

ISO/IEC 19763-3:2010

* Information technology – Metamodel framework for interoperability (MFI) – Part 3: Metamodel for ontology registration

Q


Standards confirmed

The following International Standards are confirmed for a five yearperiod:

ISO/IEC 19784-1:2006/Amd 3:2010

* Information technology – Biometric application programming interface – Part 1: BioAPI specification – Amendment 3: Support for interchange of certificates and security assertions, and other security aspects

T

ISO/IEC 19785-4:2010

* Information technology – Common Biometric Exchange Formats Framework – Part 4: Security block format specifications

J

ISO/IEC 23000-12:2010

* Information technology – Multimedia application format (MPEG-A) – Part 12: Interactive music application format

M

ISO/IEC 23000-3:2007/Amd 2:2010

* Information technology – Multimedia application format (MPEG-A) – Part 3: MPEG photo player application format – Amendment 2: Conformance testing for photo player application format

XZ

ISO/IEC 23000-9:2008/Amd 1:2010

* Information technology – Multimedia application format (MPEG-A) – Part 9: Digital Multimedia Broadcasting application format – Amendment 1: Conformance and reference software

L

ISO/IEC 24723:2010

* Information technology – Automatic identification and data capture techniques – GS1 Composite bar code symbology specification

S

ISO/IEC 24791-1:2010

* Information technology – Radio frequency identification (RFID) for item management – Software system infrastructure – Part 1: Architecture

K

ISO/IEC 25045:2010

* Systems and software engineering – Systems and software Quality Requirements and Evaluation (SQuaRE) – Evaluation module for recoverability

R

ISO/IEC TR 25060:2010

* Systems and software engineering – Systems and software product Quality Requirements and Evaluation (SQuaRE) – Common Industry Format (CIF) for usability: General framework for usability-related information

L

ISO/IEC 27005:2008**

Information technology – Security techniques – Information security risk management

U

ISO/IEC 29199-4:2010

* Information technology – JPEG XR image coding system – Part 4: Conformance testing

K

ISO/IEC 29199-5:2010

* Information technology – JPEG XR image coding system – Part 5: Reference software

E

ISO/IEC 29500-1:2008/Amd 1:2010

* Information technology – Document description and processing languages – Office Open XML File Formats – Part 1: Fundamentals and Markup Language Reference – Amendment 1

XZ

ISO/IEC 29500-4:2008/Amd 1:2010

* Information technology – Document description and processing languages – Office Open XML File Formats – Part 4: Transitional Migration Features – Amendment 1

XZ

ISO/IEC 29881:2010

* Information technology – Systems and software engineering – FiSMA 1.1 functional size measurement method

H


ISO 4175:1979 (reconfirmed)

TC 17 Steel


ISO 4990:2003

ISO 4991:2005

ISO 4992-1:2006

ISO 4992-2:2006

ISO 7900:2006

ISO 7989-1:2006


ISO 11972:1998



ISO 13583-2:2003

ISO 14737:2003

ISO 16468:2005

ISO 19959:2005

ISO 19960:2005

ISO 23717:2006

TC 18 Zinc and zinc alloys

ISO 301:2006

ISO 752:2004

ISO 15201:2006

TC 22 Road vehicles


ISO 8705:2005


ISO 10487-2:1995 (reconfirmed)

ISO 12366:2001




ISO 4252:2007



ISO 5673-1:2005

ISO 5673-2:2005








ISO 9912-1:2004







ISO/TR 12369:1994 (reconfirmed)

ISO 16149:2006

ISO 16154:2005

ISO 17567:2005

ISO 23205:2006

ISO 23206:2005

ISO 24347:2005

TC 25 Cast irons and pig irons

ISO 185:2005


ISO 21988:2006


ISO 8943:2007

TC 29 Small tools

ISO 2351-1:2007

TC 33 Refractories


TC 34 Food products

ISO 663:2007

ISO 3960:2007

ISO 4121:2003


ISO 6883:2007

ISO 8534:2008

ISO 8587:2006



ISO 13299:2003

ISO 15302:2007



ISO 7142:2007

ISO 7143:2007

ISO 10283:2007

ISO 11909:2007



ISO 639-3:2007

ISO 1951:2007

TC 38 Textiles

ISO 105-J05:2007


ISO 14731:2006




ISO 34-2:2007








ISO 5981:2007



ISO 6452:2007












ISO 17052:2007

ISO 23337:2007

TC 61 Plastics







ISO 7823-3:2007

ISO 10350-1:2007






ISO 15013:2007

ISO 15014:2007

ISO 15105-1:2007



ISO 18872:2007

ISO 19712-2:2007

ISO 19712-3:2007

ISO 29862:2007

ISO 29863:2007

ISO 29864:2007




ISO 14224:2006

ISO 16708:2006

ISO 19903:2006

TC 70 Internal combustion engines

ISO 15550:2002

TC 83 Sports and recreational equipment

ISO 11088:2006

TC 91 Surface active agents













TC 92 Fire safety

ISO/TR 12471:2004

TC 102 Iron ore and direct reduced iron


ISO 13312:2006

ISO 13313:2006

TC 104 Freight containers

ISO 10368:2006


ISO 4528:2000







ISO 13805:1999

ISO 13807:1999

TC 113 Hydrometry


ISO/TS 3716:2006



TC 114 Horology






TC 122 Packaging


TC 132 Ferroalloys








TC 146 Air quality

ISO 16000-5:2007

ISO/TR 27628:2007


ISO 5832-1:2007

ISO 5832-12:2007

ISO 5832-14:2007

ISO 5832-9:2007









ISO 12189:2008


Standards withdrawn

Period from 06 July to 24 August 2010

ISO 14607:2007

ISO 18192-1:2008

TC 155 Nickel and nickel alloys




TC 159 Ergonomics

ISO 20282-1:2006

ISO/TS 20282-2:2006


ISO 9342-2:2005




ISO 10939:2007




ISO 11884-2:2007

ISO 11979-5:2006




ISO 18369-1:2006

ISO 18369-3:2006

ISO 18369-4:2006

TC 193 Natural gas

ISO 12213-3:2006

ISO 15403-1:2006

ISO 23874:2006


ISO 15470:2004

ISO 15471:2004

ISO 17973:2002

ISO 17974:2002

ISO 18116:2005

ISO 21270:2004

ISO 22048:2004

ISO 24236:2005

ISO 24237:2005


ISO 17361:2007

ISO/PAS 17684:2003

TC 207 Environmental management

ISO 14040:2006

ISO 14044:2006

ISO 14063:2006

TC 226 Materials for the production of primary aluminium

ISO 18515:2007

ISO 23202:2006







ISO/IEC 2382-15:1999

(reconfirmed)

ISO/IEC 2382-29:1999

(reconfirmed)

ISO/IEC 8441-1:1991 (reconfirmed)

ISO/IEC 10164-20:1999

(reconfirmed)


ISO 11602-1:2000 (replaced by ISO/TS 11602-1:2010)

ISO 11602-2:2000 (replaced by ISO/TS 11602-2:2010)

TC 22 Road vehicles

ISO/TR 15031-2:2004

(replaced by ISO 15031-2:2010)

TC 29 Small tools

ISO 5610:1998 (replaced by ISO 5610-1:2010 & ISO 5610-2:2010 & ISO 5610-3:2010 & ISO 5610-4:2010 & ISO 5610-5:2010 & ISO 5610-6:2010 & ISO 5610-7:2010 & ISO 5610-8:2010 & ISO 5610-9:2010 & ISO 5610-10:2010 & ISO 5610-11:2010 & ISO 5610-12:2010 & ISO 5610-13:2010 & ISO 5610-14:2010 & ISO 5610-15:2010)

ISO 9270:1992 (replaced by ISO 9270-1:2010 & ISO 9270-2:2010)

TC 34 Food products

ISO 8261:2001 (replaced by ISO 6887-5:2010)

TC 43 Acoustics

ISO 140-1:1997 (replaced by ISO 10140-5:2010 & ISO 10140-2:2010 & ISO 10140-3:2010 & ISO 10140-4:2010 & ISO 10140-1:2010)



Meeting calendar

(update at 25 August 2010)Meetings called for the month of August are not repeated in thisedition.* Information definite but meeting not yet formally convened** Provisional






ISO 3891:1978

TC 89 Wood-based panels

ISO 2695:1976

ISO 2696:1976

ISO 3729:1976

TC 112 Vacuum technology

ISO 2861-2:1980

TC 114 Horology

ISO 2281:1990 (replaced by ISO 22810:2010)

TC 146 Air quality

ISO 8762:1988


ISO 6340:1995 (replaced by ISO 19250:2010)


ISO/TS 12029:2007

(replaced by ISO 12029:2010)


ISO 18115:2001 (replaced by ISO 18115-1:2010 & ISO 18115-2:2010)


ISO/TS 24534-1:2007


ISO/TS 24534-2:2007


ISO/TS 24534-3:2008


ISO/TS 24534-4:2008



ISO/IEC 13813:1998

September 2010

2 Helsinki (Finland) TC 146/SC 5 Air quality/Meteorology

6-12 State College (USA)

JTC 1/SC 36 Information technology/Information technology for learning, education and training

7 Paris (France) TC 21/SC 3 Equipment for fire protection and fire fighting/Fire detection and alarm systems

7-8 Beijing (China) TC 17 Steel

7-8 Milan (Italy) TC 79/SC 2 Light metals and their alloys/Organic and anodic oxidation coatings on aluminium

8 Beijing (China) TC 17/SC 16 Steel/Steels for the reinforcement and prestressing of concrete

8-9 Paris (France) TC 21/SC 8 Equipment for fire protection and fire fighting/Gaseous media and firefighting systems using gas

8-17 Prague (Czech Republic)


9 Beijing (China) TC 17/SC 15 Steel/Railway rails and their fasteners

9 Beijing (China) TC 17/SC 16 Steel/Steels for the reinforcement and prestressing of concrete

10 Tokyo (Japan) JTC 1/SC 34 Information technology/Document description and processing languages

10 Beijing (China) TC 17/SC 7 Steel/Methods of testing (other than mechanical tests and chemical analysis)

10 Paris (France) TC 21/SC 6 Equipment for fire protection and fire fighting/Foam and powder media and fixed firefighting systems using foam and powder

13-14 Oslo (Norway) TMB Technical Management Board

13-15 Ottawa (Canada) JTC 1/SC 22 Information technology/Programming languages, their environments and system software interfaces


13-16 Hamburg (Germany)

* TC 23/SC 17 Tractors and machinery for agriculture and forestry/Manually portable forest machinery

13-17 Bangkok (Thailand)

TC 61 Plastics


TC 61/SC 5 Plastics/Physical-chemical properties


TC 61/SC 6 Plastics/Ageing, chemical and environmental resistance


TC 61/SC 9 Plastics/Thermoplastic materials


TC 61/SC 10 Plastics/Cellular plastics


TC 61/SC 12 Plastics/Thermosetting materials


TC 61/SC 13 Plastics/Composites and reinforcement fibres

13-17 Orlando (USA) TC 150 Implants for surgery

13-17 Orlando (USA) TC 150/SC 4 Implants for surgery/Bone and joint replacements

13-17 Victoria (Canada)

TC 165 Timber structures

14 Bangkok (Thailand)

TC 61/SC 11 Plastics/Products

14-15 Florida (USA) TC 150/SC 1 Implants for surgery/Materials

14-15 Florida (USA) TC 150/SC 5 Implants for surgery/Osteosynthesis and spinal devices

14-16 Shanghai (China)

TC 54 Essential oils

14-17 Shanghai (China)

TC 59/SC 8 Buildings and civil engineering works/Jointing products

14-17 Kyoto (Japan) TC 172/SC 5 Optics and photonics/Microscopes and endoscopes


TC 61/SC 4 Plastics/Burning behaviour

15 Ulm (Germany) TC 123/SC 2 Plain bearings/Materials and lubricants, their properties, characteristics, test methods and testing conditions

15 Ulm (Germany) TC 123/SC 3 Plain bearings/Dimensions, tolerances and construction details

15-17 Oslo (Norway) GA General Assembly


TC 61/SC 2 Plastics/Mechanical properties

16 Ulm (Germany) TC 123/SC 5 Plain bearings/Quality analysis and assurance

16 Ulm (Germany) TC 123/SC 6 Plain bearings/Terms and common items

16 Orlando (USA) TC 150/SC 2 Implants for surgery/Cardiovascular implants and extracorporeal systems

16 Florida (USA) TC 150/SC 7 Implants for surgery/Tissue-engineered medical products

17 Ulm (Germany) TC 123 Plain bearings

17 Ulm (Germany) TC 123/SC 7 Plain bearings/Special type of plain bearings

18 Oslo (Norway) COUNCIL Council

19-24 Boulder (USA) TC 164 and SC

Mechanical testing of metals

20-22 Beijing (China) TC 26 Copper and copper alloys

20-23 Copenhagen (Denmark)

TC 34/SC 17 Food products/Management systems for food safety

20-24 Cartagena de Indias (Colombia)

TC 71 and SCConcrete, reinforced concrete and pre-stressed concrete

20-24 London (United Kingdom)

TC 108/SC 4 Mechanical vibration, shock and condition monitoring/Human exposure to mechanical vibration and shock

20-24 London (United Kingdom)

TC 108/SC 5 Mechanical vibration, shock and condition monitoring/Condition monitoring and diagnostics of machines

20-24 Guangzhou (China)

TC 198 Sterilization of health care products

21-23 New Delhi (India) GA General Assembly

22 Courbevoie, Paris (France)

TC 29/SC 8 Small tools/Tools for pressing and moulding

22-24 Unknown ** JTC 2 Joint Project Committee - Energy efficiency and renewable energy sources - Common terminology

23 Lahaina, Hawaii (USA)

TC 146/SC 1 Air quality/Stationary source emissions


TC 146/SC 2 Air quality/Workplace atmospheres


TC 146/SC 3 Air quality/Ambient atmospheres


TC 146/SC 4 Air quality/General aspects


TC 146/SC 6 Air quality/Indoor air

23 Boulder (USA) TC 164/SC 1 Mechanical testing of metals/Uniaxial testing


TC 146 Air quality

For more information, see ISO Online :www.iso.org/iso/meeting_calendar


Name Home Assignments

Documents

Transcript of Name Home Assignments