International NAFEMS Conference - Engineering Modeling, Simulation, Analysis & 3D printing
Nafems - Brochure 3D Printing
-
Upload
siddharth-priye -
Category
Engineering
-
view
125 -
download
0
Transcript of Nafems - Brochure 3D Printing
This international event highlights the best practices in engineering analysis and simulation practices, additive
manufacturing and product design from multitudinous sources including design houses, industries, research laboratories
and universities.
Topics in Engineering Analysis & Simulation - FEM, CFD, Vibrations, Fatigue, Composites, Material Models, Stochastics,
Multiphysics, Validation and Verification.
Topics in Additive Manufacturing – CAD, 3D Printing, FDM, Laser Sintering, Rapid Casting, Stereolithography, Rapid
Tooling, Post Processing and Design for Additive Manufacturing.
Interdisciplinary Topics - New Product Development, Process Parameters & Optimisation, Applications & Case Studies
(Aerospace, Automotive, Electronics, Foundry, Medical, Tooling and Manufacturing).
Conference Committee
Chairman – International Advisory Committee
Dr . Costas StavrinidisHead (ME) European Space Agency, Netherlands
Chairman – Technical Committee
Prof. N. Balakrishnan, IISc, India
Chairman – National Advisory Committee
Dr. K. S. RaghavanDiscipline Chief – Structures, CYIENT, India
Chairman – Organising Committee
Mr. Tim Morris, CEO, NAFEMS, UK
Knowledge Partners Sponsors
International NAFEMS Conference – NAFEMS 3DEngineering Modeling, Analysis, Simula�on & 3D Prin�ng
29-31 August, 2016, Bangalore, India
Organised by NAFEMS – Newton Bhabha Project Event, FICCI-NKFH – Royal Academy of Engineering, UK
Technical Papers & Publica�on: th
Abstracts of papers under above topics may be submi�ed by 29 June, 2016 as per the guidelines in website
h�p://nafems.co.in/submitPaper.html . The selected papers can be presented in the conference.
Also IE(I)-Springer Journal and Journal of Vibra�ons & Technologies (Scopus Indexed & Elsevier Coverage since
2010) will publish the chosen ar�cles that conforms to the respec�ve publica�on norms.
thImportant Date - 29 June, 2016 – Submission of Abstract thFull text of the paper selected for publica�on to be submi�ed by 29 July, 2016
Journal of Vibra�on Engineering & Technologies
(Scopus Indexed & Elsevier Coverage since 2010)
IE(I)- Springer Journal Series C
Publica�on Partner
www.nafems.co.in
Engineering Analysis & Simula�on
Structural Analysis – Linear /Nonlinear Analysis,
Joints, Thermal Analysis
CFD – Turbulence, Conjugate Heat Transfer,
Mul�phase & Phase Change.
Dynamics & Tes�ng – Crash & Seismic Simula�on.
Mul�body Simula�on – MBS & FE, Automa�on of
Analysis, Virtual Tes�ng
Composites – Layer Op�misa�on, Draping,
Damage & Failure Criterion
Mul�physics – Coupled Simula�on, Fluid-Structure
Interac�on, Vibro Acous�cs,
Fa�gue & Fracture Mechanics – Creep, Thermo
Mechanical Damage, Fa�gue Life Evalua�on
Stochas�cs – Sensi�vity Analysis, Taguchi Methods,
Varia�onal Studies.
Addi�ve Manufacturing
AM Processes - FDM, Laser Sintering, Rapid Cas�ng,
Stereolithography, Micro AM, Process Parameters &
Op�misa�on.
CAD for AM - AM Interfaces DFAM, AM Standards,
Design for Addi�ve Manufacturing, 3D Scanning.
Design, Op�misa�on & Allied Themes
Op�misa�on – Topology, Shapes and sizing,
Design/process integra�on.
Applica�ons & Case Studies - Aerospace, Automo�ve,
Electronics, Foundry, Medical, Tooling and
Manufacturing.
Analysis & Engineering Educa�on – Industry
Integra�on, Prac�cal Aspects of Stress Analysis,
MOOCS, E- Learning, Con�nuous Improvement,
Outcome Based Educa�on, Employability Aspects.
♦ Detailed instruc�ons on the submission of Abstracts are available in
h�p://nafems.co.in/submitPaper.html .
♦ thLast date for submission of abstracts is 29 June, 2016
♦ thAuthors of selected abstracts can submit the full text by 29 July, 2016
♦ The conference papers chosen by IE(I) Springer Journal & Journal of Vibra�on Engineering &
Technologies (Scopus Indexed & Elsevier Coverage since 2010) will have to conform to the publica�on
standards of respec�ve journals.
Honorary Technical Committee
Dr Gino Alan Duffe�Technology Project ManagerNAFEMSDr.BalamuruganSenior Scien�st, NALDr. N BalakrishnanProfessor, IISc Dr. Ganapathi ManickamHead Valida�on GroupMahindra SatyamDr. K HemachandraReddyProfessor, JNTUADr. Jose MathewDean, NIT- CalicutDr. P. ThirumalProfessor, GCEB
Dr.Sachin BhaleraoProfessor, DYPIETDr. T.V. GovindarajuPrincipal, KSIT Dr. G Saravana Kumar Professor, IIT ChennaiDr. Rajeev JainScien�st G, GTREDr. Y. Ravi KumarProfessor, NIT WarangalDr. M. DuraiselvamProfessor, NIT TrichyDr. K. KumarProfessor, VITProf. Sanjay SinghMechanical Engg., CSIT
Dr. T RangaswamyProfessor, GECHDr. Dilip K Mahanty
Professor, MPSTM&E Dr. M DuraiselvamProfessor, NIT Dr. K.VenkateswarluPrincipal Scien�st, NALDr. SN SridharaProfessor, KSSEMDr. B. G. Vijayasimha ReddyPrincipal, Vemana ITDr. Manjunatha BPrincipal, NHCEDr. M. PremkumarPrincipal, PEC
Conference Themes
Instructions for Authors
Honorary National Advisory Committee
Dr. K. S. Raghavan, Discipline Chief – StructuresCYIENT, India Dr. U. ChandrasekharPro Vice Chancellor VEL Tech UniversityDr. J.S. RaoPresident – Academics, KCTDr. Madhukar RaoTechnical Director, ACRIProf. Dilip K Mahanty MPSTM&E
Shri S.S. Subramanya Sastry DGM, CYIENT Dr. B. Sreehari Kumar Senior Consultant, TCSMr. Prakash KrishnaswamyCEO, Xitadel
Mr. D. Uma MaheswarExecutive Chief GE AviationMr. Sundaresan.PSenior Principal ConsultantInfosys
Prof. KarunakaranIIT, MumbaiProf. H. V.Lakshminarayana DSCE
Prof. S. MajumdarNMITProf. P. SeshuIIT BombayMr. Kannan Marudachalam GM, R&D, TVS Motor CompanyDr. T.C.RameshHead-Technology, QUEST Global
Prac�cal aspects of FEM- Benchmark & Best Prac�cesThe course is aimed at prac�cing engineers who wish to learn more about how to apply fin i te element techniques to their par�cular problems in the most effec�ve manner.
Usefulness: The following topics would be covering during the workshop : FEM - 1D & 2D, 3 D f o r m u l a � o n s a n d Meshing Methods, Prac�cal Aspects, Quality & Verifica�ons Aspects.
Coordinator :Dr. S. [email protected] No: +91-9620543017
3D Prin�ng & advanced CAD for Product Development
This workshop addresses all about the transforma�on from the ideas to the world of 3D prin�ng and product development.
Usefulness:The following topics would be covered during the workshop: CAD, 3D Prin�ng, FDM, Laser Sintering, Rapid Cas�ng, Stereolithography, Rapid Tooling, Freedom of design enabled by 3DP, 3D Prin�ng parameters and slicing, Part screening and selec�on for 3DP, Working and Construc�on of a 3D Printer, Post Processing and Design for Addi�ve Manufacturing, Reverse Engineering and Computer Aided Inspec�on Technology and impact on society and novel applica�ons in Aerospace, Automobile and Medical.
Coordinator :Mr. Nikhil [email protected] No: +91-8978707670
Design & Analysis of Composite
Structures
This workshop is focused in the
direc�on to spread the analysis
techniques in the applica�on of
composites theory for solving
prac�cal problems. The various
forms of failure in composites are
addressed in the determina�on
of integrity of a structure.
Usefulness:
The following topics would be
covered during the workshop:
M e c h a n i c s a n d fa i l u re o f
Composite Materials (Prac�ced
topics), Sandwich Structures,
Manufacturing Methods & Case
Studies.
Coordinator :
Dr. C.S. Ramesh
Mob No: +91-9986559290
www.nafems.co.in
Pre Conference Workshops
Venue: Alliance University, Bangalore Date: 29-30, August 2016
Expert Speakers
Dr. U. Chandrasekhar Vel Tech University
Stress Analysis– Aero
Engine Components
Dr. Costas Stavrinidis
Head, ME, ESA Netherland
Dr. Manfred Zehn
Professor, TUB
Dr. Rodney L. Dreisbach
STF, Boeing, USA
Dr. David Ellis
Director IDAC, UK
Dr. Giuseppe Miccoli
SR, IMAMOTER Italy
Prof. M.Moatamedi
Director of Multiphysics
NUC, Norway
Dr. Stewart Morrison
Director LUSAS, UK
Dr. Paul Newton
Council Member NAFEMS, UK
Dr. Marie-Christine Oghly
Vice President Micado, France
Dr. Alexander Ptchelintsev
Principal Scientist NRC, Finland
Dr. Anup Puri
Chief Structural EngineerSELEX Galileo, UK
Dr. Martin Wiedemann
Head, ICS Braunschweig
Dr. Jim Wood
Professor
University of Strathclyde, UK
Honorary International
Advisory Committee
Dr. H.V. Lakshminarayana Convener NAFEMS 3D Conference - 2016R&D Centre,Cambridge Institute of Technology Campus, K.R.Puram, Bangalore - [email protected]
Registration Details
♦ Industry / R&D Lab / PSUs / Public & Private Organizations ₹ 8000/- *
♦ NAFEMS Members / Faculty Members ₹ 6000/- *
♦ Studen t Participants ₹ 3000/- *♦ International Participants USD 600/- *
Mr. Tim Morris NAFEMS- UK
Simulation Technologies - Non-Linear Analysis
Dr. J. S. Rao President- Academics-KCT Vibrations - Aero Systems/
Automotive
Dr. K.S. Raghavan Cyient
Structural Analysis- Aero Systems
Dr. Ganapathi Manickam Tech Mahindra Analysis &
Design- Aerospace Engineering
Mr. D. Uma Maheswar GE- Aviation
Analysis / Simulation- Aero Systems
Dr. Sekhar Majumdar NMIT CFD - Turbulence Modeling
Dr. Rajeev Jain
GTRE – DRDO
Impact Analysis- Gas Turbines
Dr. Shreehari Kumar B Senior Consultant, TCS
FE Software Product Development
Dr. Dilip K Mahanty NMIMS University
Non-Linear Analysis- Fracture
Mechanics
Dr. Yash Agarwal Simpleware
Biomechanics- Computational Simulations
Antonios Giannakoudakis BETA CAE Systems S.A
Fatigue Analysis
Mr. Kannan Murudachalam TVS Motors
Vibrations - Automotive
Mr. Grim G jonnes Ceetron
3D Visualization of FEA
Dr.T.C.Ramesh Quest Global
Structural Dynamics
Registration on fee is payable as a online transfer/cheque /DD in favour of 'NAFEMS' payable at Bengaluru www.nafems.co.in
Mr.Sundaresan P Senior Principal
Consultant, INFOSYS
Dr. Karunakaran
Professor, IIT BombayAdditive Manufacturing
Dr. Ravi Bollina
Mahindra Ecole Centrale, 3D Printing Technology
Dr. Sarang Pande Dean, MEFGI
Additive Manufacturing
* Service Tax - 15% is applicable