®

NACHURSTriple Option

Versatile NPK liquid fertilizer with sulfurpowered by NACHURS® Bio-K®

visit us online: w w w. n a c h u r s . c o m / b i o - k or call: 800.622.4877 x 255

© 2018. NACHURS ALPINE SOLUTIONS. All rights reserved. v8.1

®

Contact us today to learn about how to

maximize yield and increase profitability

with the best liquid fertilizer technologies

on the market

What ifyour crops

communicate?could

®

ELEV

ATE Y

OUR K

They would ask for NACHURS Triple Option®

• Powered by NACHURS® Bio-K® technology

• Premium NPKS fertilizer with 100% orthophosphate

• Versatile in-furrow, foliar, fertigation, or transplant nutrition

• Rapid nutrient uptake

®

THE TECHNOLOGY THE SCIENCE

THE RESEARCH

THE PRODUCT

2017-18 Third Party Corn (In-furrow) Trial SummarySheridan, IN

nitrogen phosphorus potassium sulfur

NACHURS Triple Option® is a versatile NPKS liquid fertilizer that contains 100% orthophosphate, sulfur, and NACHURS® Bio-K® technology, the most plant available source of potassium. NACHURS Triple Option® is a high orthophosphate fertilizer offering immediate nutrient availability. Adapted for use on all crops, NACHURS Triple Option® offers the flexibility for in-furrow, foliar, fertigation, and transplant applications. It is also compatible with many crop protection products and other crop technologies, aligning to promote crop yield and quality.

NACHURS Triple Option® is seed safe when used at recommended rates including sensitive crops like soybeans, cotton and peanuts. NACHURS Triple Option® also offers excellent storability and is non-corrosive to equipment. Give your crop the option of achieving rapid nutrient uptake with this versatile product: NACHURS Triple Option®.

in-furrow foliar fertigation transplant

General In-furrow Rates:Corn (30-40” Row): 2-6 gal/acCotton: 2-2.5 gal/ac Wheat, Barley, Rye, Oats: 8-10 gal/acSunflowers: 3-5 gal/acPeanuts: 1-2 gal/acMilo: 3-5 gal/acAlfalfa: 5 gal/acSugar Beets: 3 gal/acEdible Beans: 2.5-3 gal/ac General Foliar Rate: 1-3 gal/acTransplant: 1 gal/a with 8-10 gal of water

NACHURS® Bio-K® is a premium source of potassium fertilizer combined with a natural plant metabolite creating the most effective and efficient source of potassium. Using

Bio-K® technology results in quicker germination, improved root development, and an elevated abiotic stress tolerance; this leads to better plant establishment, more vigorous growth, and higher yields.

FEATURES:

Acetate is a natural organic acid and plant metabolite Two influencers (potassium fertility and biostimulant) in a single product Very low salt index Excellent compatibility with other fertilizers

BENEFITS:

Recognized by plants as a natural form of potassium playing an important function within the plant, forming many compounds necessary for increased productivity

The preferred source of potassium for plant uptake due to the acetate carrier molecule – more efficient and readily absorbed by the plant

Plant and seed safe – will not burn at recommended rates Blending and tank mixing flexibility

What makes Bio-K® unique is in the origination of its organic-based carrier (anion), the acetate molecule. Acetate is a natural plant metabolite that has many important functions within the plant as well as in the symbiotic relationship of plant roots, soil microbes, and mycorrhizal fungi.

®

It’s not so much about the use of potassium (as we agree it is an important farming practice), but rather the use of an efficient, available, and soluble potassium source to drive nutrient stewardship, sustainability, and yield.

Contact a NACHURS representative for specific recommendations. It is always recommended that a jar test be done when adding to other

fertilizer or chemicals. Always read and follow the pesticide labels when considering tank mixing pesticides with fertilizer products.

Precision Placement

1 1/2”

2”

2”

1 1/2”

BROADCAST- No Efficiency BANDED 2”x 2”- Inefficient IN-FURROW- Efficient

Leaves plant potentially short of P at a critical growth stage. Crop roots likely will not come in contact with the fertilizer during early growth as P only moves 1/10” in the soil.

Leaves plant potentially short of P at a critical growth stage. Roots may or may not come in contact with fertilizer during critical growth period. Crop roots will come into contact with approxi-mately only 2% of the soil.

Fulfills needs of the young plant in regard to P requirements. Phosphorus placed for maximum plant efficiency. Roots are in immediate contact with the fertilizer.

Precision Placement

w w w . n a c h u r s . c o m

241.1 255.3 256.3231

234

237

240

243

246

249

252

255

258

Total Yield (bu/ac)

10-34-0 @ 5 gal

NACHURS Triple Option @ 3.25 gal

NACHURS Triple Option @ 3.25 gal +NACHURS CropMax @ 1 qt

2017-18 Third Party Corn (In-furrow) Trial SummarySheridan, IN

2015 Texas A&M AgriLife Extension – Lubbock, TXSoil microbial biomass carbon (SMBC) study*

2015 Texas A&M AgriLife Extension – Lubbock, TXSoil microbial biomass carbon (SMBC) study*

0

20

40

60

80

100

120

140

160

180

200

Rhyzo-Link LF (mg/kg of soil)

KOHK2CO3DI H2OBio-K

P<.0001*Application rate: 4 gal a.i./acre (93.5% K-salt + 6.5% PGPR) = 1.5 ul a.i./90 g soil

*Soil Preparation and Inoculation:A 90 g aliquot of soil will be weighed in 100 ml beaker and then placed in a 1 L glass jar. The jar will then be autoclaved for 3 hours on two consecutive days in order to sterilize the soil. A 50 ml solution will be prepared for each treatment as follows: 93.5% K-salt (46.75 ml) plus 6.5% PGPR (3.25 ml). Solutions will be prepared two days prior to inoculating soil. Treatments (1.5 ul aliquot) will then be added to soil with sufficient carrier (28 ml DI H2O) to bring the soil moisture to approximately 50% water filled pore space. Approximately 10 ml DI H2O will be added to the bottom of the jar and lids sealed tightly so that soil moisture is maintained during incubation. The 72 microcosms will be placed in a temperature controlled incubator at 30°C. Microcosms will be removed from the incubator 7d after treatment initiation and prepared for fumigation and extraction with 0.5 M K2SO4. The 90 g soil sample will be divided equally into three 30 g subsamples and each placed in 50 ml beakers. Two of the samples will be fumigated and third will not (non-fumigated samples). Samples to be fumigated will be put into a vacuum dessicator along with 50 ml beaker containing ethanol-free chloroform (20 ml) and boiling chips. The dessicator will be evacuated and vented six times, but on the sixth cycle it will not be vented. After three days, the vacuum will be released and the chloroform removed.

2015 Texas A&M AgriLife Extension – Lubbock, TXSoil microbial biomass carbon (SMBC) study*

0

20

40

60

80

100

120

140

160

180

200

Rhyzo-Link LF (mg/kg of soil)

KOHK2CO3DI H2OBio-K

P<.0001*Application rate: 4 gal a.i./acre (93.5% K-salt + 6.5% PGPR) = 1.5 ul a.i./90 g soil

*Soil Preparation and Inoculation:A 90 g aliquot of soil will be weighed in 100 ml beaker and then placed in a 1 L glass jar. The jar will then be autoclaved for 3 hours on two consecutive days in order to sterilize the soil. A 50 ml solution will be prepared for each treatment as follows: 93.5% K-salt (46.75 ml) plus 6.5% PGPR (3.25 ml). Solutions will be prepared two days prior to inoculating soil. Treatments (1.5 ul aliquot) will then be added to soil with sufficient carrier (28 ml DI H2O) to bring the soil moisture to approximately 50% water filled pore space. Approximately 10 ml DI H2O will be added to the bottom of the jar and lids sealed tightly so that soil moisture is maintained during incubation. The 72 microcosms will be placed in a temperature controlled incubator at 30°C. Microcosms will be removed from the incubator 7d after treatment initiation and prepared for fumigation and extraction with 0.5 M K2SO4. The 90 g soil sample will be divided equally into three 30 g subsamples and each placed in 50 ml beakers. Two of the samples will be fumigated and third will not (non-fumigated samples). Samples to be fumigated will be put into a vacuum dessicator along with 50 ml beaker containing ethanol-free chloroform (20 ml) and boiling chips. The dessicator will be evacuated and vented six times, but on the sixth cycle it will not be vented. After three days, the vacuum will be released and the chloroform removed.

2015 Texas A&M AgriLife Extension – Lubbock, TXSoil microbial biomass carbon (SMBC) study*

0

20

40

60

80

100

120

140

160

180

200

Rhyzo-Link LF (mg/kg of soil)

KOHK2CO3DI H2OBio-K

P<.0001*Application rate: 4 gal a.i./acre (93.5% K-salt + 6.5% PGPR) = 1.5 ul a.i./90 g soil

*Soil Preparation and Inoculation:A 90 g aliquot of soil will be weighed in 100 ml beaker and then placed in a 1 L glass jar. The jar will then be autoclaved for 3 hours on two consecutive days in order to sterilize the soil. A 50 ml solution will be prepared for each treatment as follows: 93.5% K-salt (46.75 ml) plus 6.5% PGPR (3.25 ml). Solutions will be prepared two days prior to inoculating soil. Treatments (1.5 ul aliquot) will then be added to soil with sufficient carrier (28 ml DI H2O) to bring the soil moisture to approximately 50% water filled pore space. Approximately 10 ml DI H2O will be added to the bottom of the jar and lids sealed tightly so that soil moisture is maintained during incubation. The 72 microcosms will be placed in a temperature controlled incubator at 30°C. Microcosms will be removed from the incubator 7d after treatment initiation and prepared for fumigation and extraction with 0.5 M K2SO4. The 90 g soil sample will be divided equally into three 30 g subsamples and each placed in 50 ml beakers. Two of the samples will be fumigated and third will not (non-fumigated samples). Samples to be fumigated will be put into a vacuum dessicator along with 50 ml beaker containing ethanol-free chloroform (20 ml) and boiling chips. The dessicator will be evacuated and vented six times, but on the sixth cycle it will not be vented. After three days, the vacuum will be released and the chloroform removed.

®

Rhyzo-Link® LF (Mg/kg of soil)

*Application rate: 4 gal a.i./acre (93.5% K-salt + 6.5% PGPR) = 1.5 ul a.i./90 g soil

®®