NACE-Br/2014/Rev.1

NACE INTERNATIONAL, USA

COATING INSPECTOR PROGRAM

TRAINING & EXAMINATION

2014 PROGRAMS

CHENNAI, INDIA

ORGANISED BY :

INDUSTRIAL QUALITY CONCEPTSSHIVANI BLOCK – I, FIRST FLOOR REAR40, EAST COAST ROADTHIRUVANMIYURCHENNAI - 600 041, INDIAPHONE : + 91–44–42158714 / 42158715 / 24516009FAX : + 91-44- 42158714 / 42158715 E-MAIL : iqc.in.org@gmail.comURL : www.iqcgroup.com

INVITATION :

INDUSTRIAL QUALITY CONCEPTS (IQC), CHENNAI

A pioneer organization in India organizing training and certification programs in Non-

Destructive Testing (NDT) & Welding Inspection (WI) has international agency

agreement with NACE International, USA for presenting their

NACE - COATING INSPECTOR PROGRAM (CIP) – LEVELS 1 & 2, Training and Test

Programs in India.

The world’s leading source of training and information on Coating Inspector is the

NACE Coating Inspector Program. For 25 years, the NACE Coating Inspector

Program has provided the coatings industry with a single, global standard for quality

training that has benefited everyone in the protective coatings industry.

Incorrect application is a leading cause of coating failures; as a result, the use of a

third party coating inspector is vital to any coatings job. The comprehensive NACE

Coating Inspector Program prepares coatings professionals for the demanding role of

being a third party coating inspector as well as being a part of an overall job team.

We are happy to announce that NACE Coating Inspector programs are being organized in India from

2003 onwards.

The instructors from NACE International will be handling the training sessions and conducting the

examination.

Participants successfully completing the hands-on and written exams for CIP Levels 1 & 2 will be

recognized as NACE Coating Inspectors. These persons will receive a NACE Wallet Card to identify

their NACE Status in the work field.

NACE PROGRAMS

JANUARY/FEBRUARY PROGRAMCIP – 1 : January 20 – 25, 2014CIP – 2 : January 27 – February 01, 2014

FEBRUARY/MARCH PROGRAMCIP – 1 : February 24 – March 01, 2014CIP – 2 : March 03 – 08, 2014

APRIL/MAY PROGRAMCIP – 1 : April 21 – 26, 2014 CIP – 2 : April 28 – May 03, 2014

JUNE PROGRAMCIP – 1 : June 09 – 14, 2014CIP – 2 : June 16 – 21, 2014

JULY/AUGUST PROGRAMCIP – 1 : July 21 – 26, 2014 CIP – 2 : July 28 – August 02, 2014

SEPTEMBER PROGRAMCIP – 1 : September 01 – 06, 2014CIP – 1 : September 08 – 13, 2014(Registration Closed)CIP – 2 : September 15 – 20, 2014

OCTOBER/NOVEMBER PROGRAMCIP – 1 : October 27 – November 01, 2014CIP – 2 : November 03 – 08, 2014

DECEMBER PROGRAMCIP – 1 : December 08 – 13, 2014CIP – 2 : December 15 – 20, 2014

* Candidates can register for CIP – 1 & CIP – 2 together. But their admission to CIP – 2 will be subject to pass in CIP – 1. Candidates who have already passed CIP 1 and holding a valid CIP 1 certification can directly appear for CIP 2.

***Note: All the above schedule dates/CIP Programs are confirmed subject to approval by NACE & minimum number of registrations.

VENUE : INDUSTRIAL QUALITY CONCEPTSCHENNAI, INDIA

Participation in the program will be limited and hence will be based on "FIRST COME - FIRST SERVED" basis

I cordially invite you to participate in this program and benefit thereby.

Best regards,S. BASKARANPRESIDENTINDUSTRIAL QUALITY CONCEPTSCHENNAI

WHO SHOULD ATTEND?

All personnel responsible for making decisions, exercising judgements applicable to coating operations in any industry.

INSPECTORS

ENGINEERS

BLAST AND PAINT APPLICATORS

MAINTENANCE PERSONNEL

SPECIFIERS

FACILITY OWNERS

MATERIAL SUPPLIERS

FABRICATORS

Any person interested in the field of Coating / Painting applications can participate in this program. Formal educational qualification / experience are not mandatory to attend the program.

EXAMINATION & CERTIFICATION

The NACE Coating Inspector Program involves training and examination in both theory and practical’s of coating applications.

CIP – 1

Technical Content :

Corrosion Control Coatings Introduction Curing Mechanisms Role of the Inspector Environmental Test Instruments Inspection Procedures Nondestructive Test Instruments Coating Specifications Documentation Surface Preparation Methods Application Procedures Coating Failures

CIP – 2

Technical Content :

Dehumidification Centrifugal blast cleaning Water jetting and blasting Specialized application equipment Linings and special coatings Concrete and cementitious surfaces Pipeline and FBE Pipeline coatings Maintenance coatings Inspection procedures Destructive and Non Destructive test instruments Surface preparation, coating and inspection of special substrates Thick barrier lining Specialized coatings and applications Specialized test and test equipments Hot-dip galvanizing Spray metallizing Coating types and failure modes Coating survey techniques Cathodic protection Regulations and standards

REGISTRATION FEES PER CANDIDATE*The fees are likely to increase from June 2014 onwards.CIP – 1TRAINING & EXAMINATION :

ADVANCE FEEUS$ 1960/- for NACE Member + Rs.4, 500/-(or) US$80 as Incidental ExpensesUS$ 2160/- for NACE Non-Member + Rs.4, 500/-(or) US$80 as Incidental Expenses

STANDARD FEEUS$ 2130/- for NACE Member + Rs.4, 500/-(or) US$80 as Incidental ExpensesUS$ 2300/- for NACE Non-Member + Rs.4, 500/-(or) US$80 as Incidental Expenses

Re-examination fees : US$955/-CIP – 2TRAINING & EXAMINATION :

ADVANCE FEEUS$ 1960/- for NACE Member + Rs.4, 000/-(or) US$80 as Incidental ExpensesUS$ 2160/- for NACE Non-Member + Rs.4, 000/-(or) US$80 as Incidental Expenses

STANDARD FEEUS$ 2130/- for NACE Member + Rs.4, 000/-(or) US$80 as Incidental ExpensesUS$ 2300/- for NACE Non-Member + Rs.4, 000/-(or) US$80 as Incidental Expenses

Re-examination fees : US$955/-ABOVE FEES INCLUDE : 6 days of lectures & practical’s with coffee breaks and lunches 1 set of course materials Examination and Certification by NACE

The fees in US$ (indicated above) shall be made as crossed DD in favour of NACE

INTERNATIONAL payable at USA.The fees in Indian Rupees (Incidental Expenses) can be paid as cash or shall be made as crossed DD in favour of INDUSTRIAL QUALITY CONCEPTS, payable at any scheduled bank in Chennai.

The drafts shall be sent to Industrial Quality Concepts, Chennai, 600 041 India, along with the Registration Form.NOTE:ADVANCE FEE: The advance fee is applicable for the payment received at Industrial Quality Concepts at least 40 days before the commencement of the program.

STANDARD FEE: The standard fee is applicable for the payment received at Industrial Quality Concepts within 40 days till registration is closed (provided seats are available).CANCELLATION / POSTPONEMENT :If cancelled50% deduction in the NACE Training & Examination fees.If postponed25% deduction in the NACE Training & Examination fees. ** Additional fees applicable if any at that time to be paid

INDUSTRIAL QUALITY CONCEPTSCHENNAI

NACE – COATING INSPECTOR 2014 PROGRAMS

REGISTRATION FORM

PLEASE TYPE OR WRITE IN BLOCK LETTERS

NAME :______________________________________________

_______________________________________________

DEPARTMENT : ______________________________________________

COMPANY : ______________________________________________

_______________________________________________

_______________________________________________

_______________________________________________

ADDRESS :______________________________________________

_______________________________________________

_______________________________________________

_______________________________________________

_______________________________________________

TELEPHONE : __________________________________________(O)

__________________________________________(R)

FAX : ______________________________________________

E-MAIL :_______________________________________________

I AM INTERESTED IN ATTENDING

Month & Year CIP – 1 _______________________ CIP – 2 ____________________ ____________________________________________________________________

IF YOU ARE A NACE MEMBER, PLEASE MENTION YOUR MEMBERSHIP NO. __________

THOSE WHO ARE REGISTERING FOR CIP2 PLEASE FURNISH THE FOLLOWING DETAILS:

CIP 1 Certification No. ________________

Validity of Certification ________________

FEES DETAILS :

US$ _________________DD NO. ____________________

DATE ______________ BANK _____________________

I agree to forfeit the cancellation/postponement charges as applicable.

DATE SIGNATURE